cosmopolitan/libc/nt/kernel32/GetThreadDescription.S

#include "libc/nt/codegen.h"
.imp	kernel32,__imp_GetThreadDescription,GetThreadDescription

	.text.windows
	.ftrace1
GetThreadDescription:
	.ftrace2
#ifdef __x86_64__
	push	%rbp
	mov	%rsp,%rbp
	mov	__imp_GetThreadDescription(%rip),%rax
	jmp	__sysv2nt
#elif defined(__aarch64__)
	mov	x0,#0
	ret
#endif
	.endfn	GetThreadDescription,globl
	.previous
Make progress towards aarch64 build 2023-05-01 19:43:59 -07:00			`#include "libc/nt/codegen.h"`
Make improvements - We now serialize the file descriptor table when spawning / executing processes on Windows. This means you can now inherit more stuff than just standard i/o. It's needed by bash, which duplicates the console to file descriptor #255. We also now do a better job serializing the environment variables, so you're less likely to encounter E2BIG when using your bash shell. We also no longer coerce environ to uppercase - execve() on Windows now remotely controls its parent process to make them spawn a replacement for itself. Then it'll be able to terminate immediately once the spawn succeeds, without having to linger around for the lifetime as a shell process for proxying the exit code. When process worker thread running in the parent sees the child die, it's given a handle to the new child, to replace it in the process table. - execve() and posix_spawn() on Windows will now provide CreateProcess an explicit handle list. This allows us to remove handle locks which enables better fork/spawn concurrency, with seriously correct thread safety. Other codebases like Go use the same technique. On the other hand fork() still favors the conventional WIN32 inheritence approach which can be a little bit messy, but is controlled by guaranteeing perfectly clean slates at both the spawning and execution boundaries - sigset_t is now 64 bits. Having it be 128 bits was a mistake because there's no reason to use that and it's only supported by FreeBSD. By using the system word size, signal mask manipulation on Windows goes very fast. Furthermore @asyncsignalsafe funcs have been rewritten on Windows to take advantage of signal masking, now that it's much more pleasant to use. - All the overlapped i/o code on Windows has been rewritten for pretty good signal and cancelation safety. We're now able to ensure overlap data structures are cleaned up so long as you don't longjmp() out of out of a signal handler that interrupted an i/o operation. Latencies are also improved thanks to the removal of lots of "busy wait" code. Waits should be optimal for everything except poll(), which shall be the last and final demon we slay in the win32 i/o horror show. - getrusage() on Windows is now able to report RUSAGE_CHILDREN as well as RUSAGE_SELF, thanks to aggregation in the process manager thread. 2023-10-08 05:36:18 -07:00			`.imp kernel32,__imp_GetThreadDescription,GetThreadDescription`
Initial import 2020-06-15 07:18:57 -07:00
			`.text.windows`
Add OpenMP support 2024-01-28 21:57:40 -08:00			`.ftrace1`
Make improvements - We now serialize the file descriptor table when spawning / executing processes on Windows. This means you can now inherit more stuff than just standard i/o. It's needed by bash, which duplicates the console to file descriptor #255. We also now do a better job serializing the environment variables, so you're less likely to encounter E2BIG when using your bash shell. We also no longer coerce environ to uppercase - execve() on Windows now remotely controls its parent process to make them spawn a replacement for itself. Then it'll be able to terminate immediately once the spawn succeeds, without having to linger around for the lifetime as a shell process for proxying the exit code. When process worker thread running in the parent sees the child die, it's given a handle to the new child, to replace it in the process table. - execve() and posix_spawn() on Windows will now provide CreateProcess an explicit handle list. This allows us to remove handle locks which enables better fork/spawn concurrency, with seriously correct thread safety. Other codebases like Go use the same technique. On the other hand fork() still favors the conventional WIN32 inheritence approach which can be a little bit messy, but is controlled by guaranteeing perfectly clean slates at both the spawning and execution boundaries - sigset_t is now 64 bits. Having it be 128 bits was a mistake because there's no reason to use that and it's only supported by FreeBSD. By using the system word size, signal mask manipulation on Windows goes very fast. Furthermore @asyncsignalsafe funcs have been rewritten on Windows to take advantage of signal masking, now that it's much more pleasant to use. - All the overlapped i/o code on Windows has been rewritten for pretty good signal and cancelation safety. We're now able to ensure overlap data structures are cleaned up so long as you don't longjmp() out of out of a signal handler that interrupted an i/o operation. Latencies are also improved thanks to the removal of lots of "busy wait" code. Waits should be optimal for everything except poll(), which shall be the last and final demon we slay in the win32 i/o horror show. - getrusage() on Windows is now able to report RUSAGE_CHILDREN as well as RUSAGE_SELF, thanks to aggregation in the process manager thread. 2023-10-08 05:36:18 -07:00			`GetThreadDescription:`
Add OpenMP support 2024-01-28 21:57:40 -08:00			`.ftrace2`
Get LIBC_RUNTIME and LIBC_CALLS building on aarch64 2023-05-09 01:56:56 -07:00			`#ifdef __x86_64__`
Initial import 2020-06-15 07:18:57 -07:00			`push %rbp`
			`mov %rsp,%rbp`
Make improvements - We now serialize the file descriptor table when spawning / executing processes on Windows. This means you can now inherit more stuff than just standard i/o. It's needed by bash, which duplicates the console to file descriptor #255. We also now do a better job serializing the environment variables, so you're less likely to encounter E2BIG when using your bash shell. We also no longer coerce environ to uppercase - execve() on Windows now remotely controls its parent process to make them spawn a replacement for itself. Then it'll be able to terminate immediately once the spawn succeeds, without having to linger around for the lifetime as a shell process for proxying the exit code. When process worker thread running in the parent sees the child die, it's given a handle to the new child, to replace it in the process table. - execve() and posix_spawn() on Windows will now provide CreateProcess an explicit handle list. This allows us to remove handle locks which enables better fork/spawn concurrency, with seriously correct thread safety. Other codebases like Go use the same technique. On the other hand fork() still favors the conventional WIN32 inheritence approach which can be a little bit messy, but is controlled by guaranteeing perfectly clean slates at both the spawning and execution boundaries - sigset_t is now 64 bits. Having it be 128 bits was a mistake because there's no reason to use that and it's only supported by FreeBSD. By using the system word size, signal mask manipulation on Windows goes very fast. Furthermore @asyncsignalsafe funcs have been rewritten on Windows to take advantage of signal masking, now that it's much more pleasant to use. - All the overlapped i/o code on Windows has been rewritten for pretty good signal and cancelation safety. We're now able to ensure overlap data structures are cleaned up so long as you don't longjmp() out of out of a signal handler that interrupted an i/o operation. Latencies are also improved thanks to the removal of lots of "busy wait" code. Waits should be optimal for everything except poll(), which shall be the last and final demon we slay in the win32 i/o horror show. - getrusage() on Windows is now able to report RUSAGE_CHILDREN as well as RUSAGE_SELF, thanks to aggregation in the process manager thread. 2023-10-08 05:36:18 -07:00			`mov __imp_GetThreadDescription(%rip),%rax`
Initial import 2020-06-15 07:18:57 -07:00			`jmp __sysv2nt`
Get LIBC_RUNTIME and LIBC_CALLS building on aarch64 2023-05-09 01:56:56 -07:00			`#elif defined(__aarch64__)`
			`mov x0,#0`
			`ret`
			`#endif`
Make improvements - We now serialize the file descriptor table when spawning / executing processes on Windows. This means you can now inherit more stuff than just standard i/o. It's needed by bash, which duplicates the console to file descriptor #255. We also now do a better job serializing the environment variables, so you're less likely to encounter E2BIG when using your bash shell. We also no longer coerce environ to uppercase - execve() on Windows now remotely controls its parent process to make them spawn a replacement for itself. Then it'll be able to terminate immediately once the spawn succeeds, without having to linger around for the lifetime as a shell process for proxying the exit code. When process worker thread running in the parent sees the child die, it's given a handle to the new child, to replace it in the process table. - execve() and posix_spawn() on Windows will now provide CreateProcess an explicit handle list. This allows us to remove handle locks which enables better fork/spawn concurrency, with seriously correct thread safety. Other codebases like Go use the same technique. On the other hand fork() still favors the conventional WIN32 inheritence approach which can be a little bit messy, but is controlled by guaranteeing perfectly clean slates at both the spawning and execution boundaries - sigset_t is now 64 bits. Having it be 128 bits was a mistake because there's no reason to use that and it's only supported by FreeBSD. By using the system word size, signal mask manipulation on Windows goes very fast. Furthermore @asyncsignalsafe funcs have been rewritten on Windows to take advantage of signal masking, now that it's much more pleasant to use. - All the overlapped i/o code on Windows has been rewritten for pretty good signal and cancelation safety. We're now able to ensure overlap data structures are cleaned up so long as you don't longjmp() out of out of a signal handler that interrupted an i/o operation. Latencies are also improved thanks to the removal of lots of "busy wait" code. Waits should be optimal for everything except poll(), which shall be the last and final demon we slay in the win32 i/o horror show. - getrusage() on Windows is now able to report RUSAGE_CHILDREN as well as RUSAGE_SELF, thanks to aggregation in the process manager thread. 2023-10-08 05:36:18 -07:00			`.endfn GetThreadDescription,globl`
Initial import 2020-06-15 07:18:57 -07:00			`.previous`