cosmopolitan/third_party/mbedtls/chacha20.c

629 lines
24 KiB
C
Raw Normal View History

/*-*- mode:c;indent-tabs-mode:nil;c-basic-offset:4;tab-width:4;coding:utf-8 -*-│
vi: set net ft=c ts=2 sts=2 sw=2 fenc=utf-8 :vi
Copyright The Mbed TLS Contributors
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0 │
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
#include "libc/bits/bits.h"
#include "libc/stdio/stdio.h"
#include "third_party/mbedtls/chacha20.h"
#include "third_party/mbedtls/common.h"
#include "third_party/mbedtls/error.h"
#include "third_party/mbedtls/platform.h"
2021-06-16 03:18:59 +00:00
asm(".ident\t\"\\n\\n\
Mbed TLS (Apache 2.0)\\n\
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
Copyright ARM Limited\\n\
Copyright Mbed TLS Contributors\"");
2021-06-16 03:18:59 +00:00
asm(".include \"libc/disclaimer.inc\"");
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
/* clang-format off */
2021-06-15 18:39:36 +00:00
/* Parameter validation macros */
#define CHACHA20_VALIDATE_RET( cond ) \
MBEDTLS_INTERNAL_VALIDATE_RET( cond, MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA )
#define CHACHA20_VALIDATE( cond ) \
MBEDTLS_INTERNAL_VALIDATE( cond )
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
#define BYTES_TO_U32_LE( data, offset ) READ32LE((data) + (offset))
2021-06-15 18:39:36 +00:00
#define ROTL32( value, amount ) \
( (uint32_t) ( (value) << (amount) ) | ( (value) >> ( 32 - (amount) ) ) )
#define CHACHA20_CTR_INDEX ( 12U )
#define CHACHA20_BLOCK_SIZE_BYTES ( 4U * 16U )
/**
2021-07-05 21:03:50 +00:00
* \brief Generates a keystream block.
2021-06-15 18:39:36 +00:00
*
2021-07-05 21:03:50 +00:00
* \param s The initial ChaCha20 state (key, nonce, counter).
* \param k Generated keystream bytes are written to this buffer.
2021-06-15 18:39:36 +00:00
*/
2021-07-05 21:03:50 +00:00
static void chacha20_block( const uint32_t s[16], unsigned char k[64] )
2021-06-15 18:39:36 +00:00
{
2021-07-05 21:03:50 +00:00
int i;
uint8_t *p;
uint32_t A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P;
A = s[ 0];
B = s[ 1];
C = s[ 2];
D = s[ 3];
E = s[ 4];
F = s[ 5];
G = s[ 6];
H = s[ 7];
I = s[ 8];
J = s[ 9];
K = s[10];
L = s[11];
M = s[12];
N = s[13];
O = s[14];
P = s[15];
for (i = 0; i < 10; ++i) {
A += E; M = ROTL32(M ^ A, 16);
B += F; N = ROTL32(N ^ B, 16);
C += G; O = ROTL32(O ^ C, 16);
D += H; P = ROTL32(P ^ D, 16);
I += M; E = ROTL32(E ^ I, 12);
J += N; F = ROTL32(F ^ J, 12);
K += O; G = ROTL32(G ^ K, 12);
L += P; H = ROTL32(H ^ L, 12);
A += E; M = ROTL32(M ^ A, 8);
B += F; N = ROTL32(N ^ B, 8);
C += G; O = ROTL32(O ^ C, 8);
D += H; P = ROTL32(P ^ D, 8);
I += M; E = ROTL32(E ^ I, 7);
J += N; F = ROTL32(F ^ J, 7);
K += O; G = ROTL32(G ^ K, 7);
L += P; H = ROTL32(H ^ L, 7);
A += F; P = ROTL32(P ^ A, 16);
B += G; M = ROTL32(M ^ B, 16);
C += H; N = ROTL32(N ^ C, 16);
D += E; O = ROTL32(O ^ D, 16);
K += P; F = ROTL32(F ^ K, 12);
L += M; G = ROTL32(G ^ L, 12);
I += N; H = ROTL32(H ^ I, 12);
J += O; E = ROTL32(E ^ J, 12);
A += F; P = ROTL32(P ^ A, 8);
B += G; M = ROTL32(M ^ B, 8);
C += H; N = ROTL32(N ^ C, 8);
D += E; O = ROTL32(O ^ D, 8);
K += P; F = ROTL32(F ^ K, 7);
L += M; G = ROTL32(G ^ L, 7);
I += N; H = ROTL32(H ^ I, 7);
J += O; E = ROTL32(E ^ J, 7);
}
p = k;
A += s[ 0]; p = WRITE32LE(p, A);
B += s[ 1]; p = WRITE32LE(p, B);
C += s[ 2]; p = WRITE32LE(p, C);
D += s[ 3]; p = WRITE32LE(p, D);
E += s[ 4]; p = WRITE32LE(p, E);
F += s[ 5]; p = WRITE32LE(p, F);
G += s[ 6]; p = WRITE32LE(p, G);
H += s[ 7]; p = WRITE32LE(p, H);
I += s[ 8]; p = WRITE32LE(p, I);
J += s[ 9]; p = WRITE32LE(p, J);
K += s[10]; p = WRITE32LE(p, K);
L += s[11]; p = WRITE32LE(p, L);
M += s[12]; p = WRITE32LE(p, M);
N += s[13]; p = WRITE32LE(p, N);
O += s[14]; p = WRITE32LE(p, O);
P += s[15]; p = WRITE32LE(p, P);
2021-06-15 18:39:36 +00:00
}
/**
2021-07-05 21:03:50 +00:00
* \brief This function initializes the specified ChaCha20 context.
2021-06-15 18:39:36 +00:00
*
2021-07-05 21:03:50 +00:00
* It must be the first API called before using
* the context.
2021-06-15 18:39:36 +00:00
*
2021-07-05 21:03:50 +00:00
* It is usually followed by calls to
* \c mbedtls_chacha20_setkey() and
* \c mbedtls_chacha20_starts(), then one or more calls to
* to \c mbedtls_chacha20_update(), and finally to
* \c mbedtls_chacha20_free().
2021-06-15 18:39:36 +00:00
*
2021-07-05 21:03:50 +00:00
* \param ctx The ChaCha20 context to initialize.
* This must not be \c NULL.
2021-06-15 18:39:36 +00:00
*/
void mbedtls_chacha20_init( mbedtls_chacha20_context *ctx )
{
CHACHA20_VALIDATE( ctx != NULL );
mbedtls_platform_zeroize( ctx->state, sizeof( ctx->state ) );
mbedtls_platform_zeroize( ctx->keystream8, sizeof( ctx->keystream8 ) );
/* Initially, there's no keystream bytes available */
ctx->keystream_bytes_used = CHACHA20_BLOCK_SIZE_BYTES;
}
2021-07-05 21:03:50 +00:00
/**
* \brief This function releases and clears the specified
* ChaCha20 context.
*
* \param ctx The ChaCha20 context to clear. This may be \c NULL,
* in which case this function is a no-op. If it is not
* \c NULL, it must point to an initialized context.
*
*/
2021-06-15 18:39:36 +00:00
void mbedtls_chacha20_free( mbedtls_chacha20_context *ctx )
{
if( ctx != NULL )
{
mbedtls_platform_zeroize( ctx, sizeof( mbedtls_chacha20_context ) );
}
}
2021-07-05 21:03:50 +00:00
/**
* \brief This function sets the encryption/decryption key.
*
* \note After using this function, you must also call
* \c mbedtls_chacha20_starts() to set a nonce before you
* start encrypting/decrypting data with
* \c mbedtls_chacha_update().
*
* \param ctx The ChaCha20 context to which the key should be bound.
* It must be initialized.
* \param key The encryption/decryption key. This must be \c 32 Bytes
* in length.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or key is NULL.
*/
2021-06-15 18:39:36 +00:00
int mbedtls_chacha20_setkey( mbedtls_chacha20_context *ctx,
2021-07-05 21:03:50 +00:00
const unsigned char key[32] )
2021-06-15 18:39:36 +00:00
{
CHACHA20_VALIDATE_RET( ctx != NULL );
CHACHA20_VALIDATE_RET( key != NULL );
/* ChaCha20 constants - the string "expand 32-byte k" */
ctx->state[0] = 0x61707865;
ctx->state[1] = 0x3320646e;
ctx->state[2] = 0x79622d32;
ctx->state[3] = 0x6b206574;
/* Set key */
ctx->state[4] = BYTES_TO_U32_LE( key, 0 );
ctx->state[5] = BYTES_TO_U32_LE( key, 4 );
ctx->state[6] = BYTES_TO_U32_LE( key, 8 );
ctx->state[7] = BYTES_TO_U32_LE( key, 12 );
ctx->state[8] = BYTES_TO_U32_LE( key, 16 );
ctx->state[9] = BYTES_TO_U32_LE( key, 20 );
ctx->state[10] = BYTES_TO_U32_LE( key, 24 );
ctx->state[11] = BYTES_TO_U32_LE( key, 28 );
return( 0 );
}
2021-07-05 21:03:50 +00:00
/**
* \brief This function sets the nonce and initial counter value.
*
* \note A ChaCha20 context can be re-used with the same key by
* calling this function to change the nonce.
*
* \warning You must never use the same nonce twice with the same key.
* This would void any confidentiality guarantees for the
* messages encrypted with the same nonce and key.
*
* \param ctx The ChaCha20 context to which the nonce should be bound.
* It must be initialized and bound to a key.
* \param nonce The nonce. This must be \c 12 Bytes in size.
* \param counter The initial counter value. This is usually \c 0.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or nonce is
* NULL.
*/
2021-06-15 18:39:36 +00:00
int mbedtls_chacha20_starts( mbedtls_chacha20_context* ctx,
const unsigned char nonce[12],
uint32_t counter )
{
CHACHA20_VALIDATE_RET( ctx != NULL );
CHACHA20_VALIDATE_RET( nonce != NULL );
/* Counter */
ctx->state[12] = counter;
/* Nonce */
ctx->state[13] = BYTES_TO_U32_LE( nonce, 0 );
ctx->state[14] = BYTES_TO_U32_LE( nonce, 4 );
ctx->state[15] = BYTES_TO_U32_LE( nonce, 8 );
mbedtls_platform_zeroize( ctx->keystream8, sizeof( ctx->keystream8 ) );
/* Initially, there's no keystream bytes available */
ctx->keystream_bytes_used = CHACHA20_BLOCK_SIZE_BYTES;
return( 0 );
}
2021-07-05 21:03:50 +00:00
/**
* \brief This function encrypts or decrypts data.
*
* Since ChaCha20 is a stream cipher, the same operation is
* used for encrypting and decrypting data.
*
* \note The \p input and \p output pointers must either be equal or
* point to non-overlapping buffers.
*
* \note \c mbedtls_chacha20_setkey() and
* \c mbedtls_chacha20_starts() must be called at least once
* to setup the context before this function can be called.
*
* \note This function can be called multiple times in a row in
* order to encrypt of decrypt data piecewise with the same
* key and nonce.
*
* \param ctx The ChaCha20 context to use for encryption or decryption.
* It must be initialized and bound to a key and nonce.
* \param size The length of the input data in Bytes.
* \param input The buffer holding the input data.
* This pointer can be \c NULL if `size == 0`.
* \param output The buffer holding the output data.
* This must be able to hold \p size Bytes.
* This pointer can be \c NULL if `size == 0`.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
2021-06-15 18:39:36 +00:00
int mbedtls_chacha20_update( mbedtls_chacha20_context *ctx,
2021-07-05 21:03:50 +00:00
size_t size,
const unsigned char *input,
unsigned char *output )
2021-06-15 18:39:36 +00:00
{
size_t offset = 0U;
size_t i;
CHACHA20_VALIDATE_RET( ctx != NULL );
CHACHA20_VALIDATE_RET( size == 0 || input != NULL );
CHACHA20_VALIDATE_RET( size == 0 || output != NULL );
/* Use leftover keystream bytes, if available */
while( size > 0U && ctx->keystream_bytes_used < CHACHA20_BLOCK_SIZE_BYTES )
{
output[offset] = input[offset]
^ ctx->keystream8[ctx->keystream_bytes_used];
ctx->keystream_bytes_used++;
offset++;
size--;
}
/* Process full blocks */
while( size >= CHACHA20_BLOCK_SIZE_BYTES )
{
/* Generate new keystream block and increment counter */
chacha20_block( ctx->state, ctx->keystream8 );
ctx->state[CHACHA20_CTR_INDEX]++;
for( i = 0U; i < 64U; i += 8U )
{
output[offset + i ] = input[offset + i ] ^ ctx->keystream8[i ];
output[offset + i+1] = input[offset + i+1] ^ ctx->keystream8[i+1];
output[offset + i+2] = input[offset + i+2] ^ ctx->keystream8[i+2];
output[offset + i+3] = input[offset + i+3] ^ ctx->keystream8[i+3];
output[offset + i+4] = input[offset + i+4] ^ ctx->keystream8[i+4];
output[offset + i+5] = input[offset + i+5] ^ ctx->keystream8[i+5];
output[offset + i+6] = input[offset + i+6] ^ ctx->keystream8[i+6];
output[offset + i+7] = input[offset + i+7] ^ ctx->keystream8[i+7];
}
offset += CHACHA20_BLOCK_SIZE_BYTES;
size -= CHACHA20_BLOCK_SIZE_BYTES;
}
/* Last (partial) block */
if( size > 0U )
{
/* Generate new keystream block and increment counter */
chacha20_block( ctx->state, ctx->keystream8 );
ctx->state[CHACHA20_CTR_INDEX]++;
for( i = 0U; i < size; i++)
{
output[offset + i] = input[offset + i] ^ ctx->keystream8[i];
}
ctx->keystream_bytes_used = size;
}
return( 0 );
}
2021-07-05 21:03:50 +00:00
/**
* \brief This function encrypts or decrypts data with ChaCha20 and
* the given key and nonce.
*
* Since ChaCha20 is a stream cipher, the same operation is
* used for encrypting and decrypting data.
*
* \warning You must never use the same (key, nonce) pair more than
* once. This would void any confidentiality guarantees for
* the messages encrypted with the same nonce and key.
*
* \note The \p input and \p output pointers must either be equal or
* point to non-overlapping buffers.
*
* \param key The encryption/decryption key.
* This must be \c 32 Bytes in length.
* \param nonce The nonce. This must be \c 12 Bytes in size.
* \param counter The initial counter value. This is usually \c 0.
* \param size The length of the input data in Bytes.
* \param input The buffer holding the input data.
* This pointer can be \c NULL if `size == 0`.
* \param output The buffer holding the output data.
* This must be able to hold \p size Bytes.
* This pointer can be \c NULL if `size == 0`.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
2021-06-15 18:39:36 +00:00
int mbedtls_chacha20_crypt( const unsigned char key[32],
const unsigned char nonce[12],
uint32_t counter,
size_t data_len,
const unsigned char* input,
unsigned char* output )
{
mbedtls_chacha20_context ctx;
int ret = MBEDTLS_ERR_THIS_CORRUPTION;
2021-06-15 18:39:36 +00:00
CHACHA20_VALIDATE_RET( key != NULL );
CHACHA20_VALIDATE_RET( nonce != NULL );
CHACHA20_VALIDATE_RET( data_len == 0 || input != NULL );
CHACHA20_VALIDATE_RET( data_len == 0 || output != NULL );
mbedtls_chacha20_init( &ctx );
ret = mbedtls_chacha20_setkey( &ctx, key );
if( ret != 0 )
goto cleanup;
ret = mbedtls_chacha20_starts( &ctx, nonce, counter );
if( ret != 0 )
goto cleanup;
ret = mbedtls_chacha20_update( &ctx, data_len, input, output );
cleanup:
mbedtls_chacha20_free( &ctx );
return( ret );
}
#if defined(MBEDTLS_SELF_TEST)
static const unsigned char test_keys[2][32] =
{
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
},
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01
}
};
static const unsigned char test_nonces[2][12] =
{
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00
},
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x02
}
};
static const uint32_t test_counters[2] =
{
0U,
1U
};
static const unsigned char test_input[2][375] =
{
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
},
{
0x41, 0x6e, 0x79, 0x20, 0x73, 0x75, 0x62, 0x6d,
0x69, 0x73, 0x73, 0x69, 0x6f, 0x6e, 0x20, 0x74,
0x6f, 0x20, 0x74, 0x68, 0x65, 0x20, 0x49, 0x45,
0x54, 0x46, 0x20, 0x69, 0x6e, 0x74, 0x65, 0x6e,
0x64, 0x65, 0x64, 0x20, 0x62, 0x79, 0x20, 0x74,
0x68, 0x65, 0x20, 0x43, 0x6f, 0x6e, 0x74, 0x72,
0x69, 0x62, 0x75, 0x74, 0x6f, 0x72, 0x20, 0x66,
0x6f, 0x72, 0x20, 0x70, 0x75, 0x62, 0x6c, 0x69,
0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x20, 0x61,
0x73, 0x20, 0x61, 0x6c, 0x6c, 0x20, 0x6f, 0x72,
0x20, 0x70, 0x61, 0x72, 0x74, 0x20, 0x6f, 0x66,
0x20, 0x61, 0x6e, 0x20, 0x49, 0x45, 0x54, 0x46,
0x20, 0x49, 0x6e, 0x74, 0x65, 0x72, 0x6e, 0x65,
0x74, 0x2d, 0x44, 0x72, 0x61, 0x66, 0x74, 0x20,
0x6f, 0x72, 0x20, 0x52, 0x46, 0x43, 0x20, 0x61,
0x6e, 0x64, 0x20, 0x61, 0x6e, 0x79, 0x20, 0x73,
0x74, 0x61, 0x74, 0x65, 0x6d, 0x65, 0x6e, 0x74,
0x20, 0x6d, 0x61, 0x64, 0x65, 0x20, 0x77, 0x69,
0x74, 0x68, 0x69, 0x6e, 0x20, 0x74, 0x68, 0x65,
0x20, 0x63, 0x6f, 0x6e, 0x74, 0x65, 0x78, 0x74,
0x20, 0x6f, 0x66, 0x20, 0x61, 0x6e, 0x20, 0x49,
0x45, 0x54, 0x46, 0x20, 0x61, 0x63, 0x74, 0x69,
0x76, 0x69, 0x74, 0x79, 0x20, 0x69, 0x73, 0x20,
0x63, 0x6f, 0x6e, 0x73, 0x69, 0x64, 0x65, 0x72,
0x65, 0x64, 0x20, 0x61, 0x6e, 0x20, 0x22, 0x49,
0x45, 0x54, 0x46, 0x20, 0x43, 0x6f, 0x6e, 0x74,
0x72, 0x69, 0x62, 0x75, 0x74, 0x69, 0x6f, 0x6e,
0x22, 0x2e, 0x20, 0x53, 0x75, 0x63, 0x68, 0x20,
0x73, 0x74, 0x61, 0x74, 0x65, 0x6d, 0x65, 0x6e,
0x74, 0x73, 0x20, 0x69, 0x6e, 0x63, 0x6c, 0x75,
0x64, 0x65, 0x20, 0x6f, 0x72, 0x61, 0x6c, 0x20,
0x73, 0x74, 0x61, 0x74, 0x65, 0x6d, 0x65, 0x6e,
0x74, 0x73, 0x20, 0x69, 0x6e, 0x20, 0x49, 0x45,
0x54, 0x46, 0x20, 0x73, 0x65, 0x73, 0x73, 0x69,
0x6f, 0x6e, 0x73, 0x2c, 0x20, 0x61, 0x73, 0x20,
0x77, 0x65, 0x6c, 0x6c, 0x20, 0x61, 0x73, 0x20,
0x77, 0x72, 0x69, 0x74, 0x74, 0x65, 0x6e, 0x20,
0x61, 0x6e, 0x64, 0x20, 0x65, 0x6c, 0x65, 0x63,
0x74, 0x72, 0x6f, 0x6e, 0x69, 0x63, 0x20, 0x63,
0x6f, 0x6d, 0x6d, 0x75, 0x6e, 0x69, 0x63, 0x61,
0x74, 0x69, 0x6f, 0x6e, 0x73, 0x20, 0x6d, 0x61,
0x64, 0x65, 0x20, 0x61, 0x74, 0x20, 0x61, 0x6e,
0x79, 0x20, 0x74, 0x69, 0x6d, 0x65, 0x20, 0x6f,
0x72, 0x20, 0x70, 0x6c, 0x61, 0x63, 0x65, 0x2c,
0x20, 0x77, 0x68, 0x69, 0x63, 0x68, 0x20, 0x61,
0x72, 0x65, 0x20, 0x61, 0x64, 0x64, 0x72, 0x65,
0x73, 0x73, 0x65, 0x64, 0x20, 0x74, 0x6f
}
};
static const unsigned char test_output[2][375] =
{
{
0x76, 0xb8, 0xe0, 0xad, 0xa0, 0xf1, 0x3d, 0x90,
0x40, 0x5d, 0x6a, 0xe5, 0x53, 0x86, 0xbd, 0x28,
0xbd, 0xd2, 0x19, 0xb8, 0xa0, 0x8d, 0xed, 0x1a,
0xa8, 0x36, 0xef, 0xcc, 0x8b, 0x77, 0x0d, 0xc7,
0xda, 0x41, 0x59, 0x7c, 0x51, 0x57, 0x48, 0x8d,
0x77, 0x24, 0xe0, 0x3f, 0xb8, 0xd8, 0x4a, 0x37,
0x6a, 0x43, 0xb8, 0xf4, 0x15, 0x18, 0xa1, 0x1c,
0xc3, 0x87, 0xb6, 0x69, 0xb2, 0xee, 0x65, 0x86
},
{
0xa3, 0xfb, 0xf0, 0x7d, 0xf3, 0xfa, 0x2f, 0xde,
0x4f, 0x37, 0x6c, 0xa2, 0x3e, 0x82, 0x73, 0x70,
0x41, 0x60, 0x5d, 0x9f, 0x4f, 0x4f, 0x57, 0xbd,
0x8c, 0xff, 0x2c, 0x1d, 0x4b, 0x79, 0x55, 0xec,
0x2a, 0x97, 0x94, 0x8b, 0xd3, 0x72, 0x29, 0x15,
0xc8, 0xf3, 0xd3, 0x37, 0xf7, 0xd3, 0x70, 0x05,
0x0e, 0x9e, 0x96, 0xd6, 0x47, 0xb7, 0xc3, 0x9f,
0x56, 0xe0, 0x31, 0xca, 0x5e, 0xb6, 0x25, 0x0d,
0x40, 0x42, 0xe0, 0x27, 0x85, 0xec, 0xec, 0xfa,
0x4b, 0x4b, 0xb5, 0xe8, 0xea, 0xd0, 0x44, 0x0e,
0x20, 0xb6, 0xe8, 0xdb, 0x09, 0xd8, 0x81, 0xa7,
0xc6, 0x13, 0x2f, 0x42, 0x0e, 0x52, 0x79, 0x50,
0x42, 0xbd, 0xfa, 0x77, 0x73, 0xd8, 0xa9, 0x05,
0x14, 0x47, 0xb3, 0x29, 0x1c, 0xe1, 0x41, 0x1c,
0x68, 0x04, 0x65, 0x55, 0x2a, 0xa6, 0xc4, 0x05,
0xb7, 0x76, 0x4d, 0x5e, 0x87, 0xbe, 0xa8, 0x5a,
0xd0, 0x0f, 0x84, 0x49, 0xed, 0x8f, 0x72, 0xd0,
0xd6, 0x62, 0xab, 0x05, 0x26, 0x91, 0xca, 0x66,
0x42, 0x4b, 0xc8, 0x6d, 0x2d, 0xf8, 0x0e, 0xa4,
0x1f, 0x43, 0xab, 0xf9, 0x37, 0xd3, 0x25, 0x9d,
0xc4, 0xb2, 0xd0, 0xdf, 0xb4, 0x8a, 0x6c, 0x91,
0x39, 0xdd, 0xd7, 0xf7, 0x69, 0x66, 0xe9, 0x28,
0xe6, 0x35, 0x55, 0x3b, 0xa7, 0x6c, 0x5c, 0x87,
0x9d, 0x7b, 0x35, 0xd4, 0x9e, 0xb2, 0xe6, 0x2b,
0x08, 0x71, 0xcd, 0xac, 0x63, 0x89, 0x39, 0xe2,
0x5e, 0x8a, 0x1e, 0x0e, 0xf9, 0xd5, 0x28, 0x0f,
0xa8, 0xca, 0x32, 0x8b, 0x35, 0x1c, 0x3c, 0x76,
0x59, 0x89, 0xcb, 0xcf, 0x3d, 0xaa, 0x8b, 0x6c,
0xcc, 0x3a, 0xaf, 0x9f, 0x39, 0x79, 0xc9, 0x2b,
0x37, 0x20, 0xfc, 0x88, 0xdc, 0x95, 0xed, 0x84,
0xa1, 0xbe, 0x05, 0x9c, 0x64, 0x99, 0xb9, 0xfd,
0xa2, 0x36, 0xe7, 0xe8, 0x18, 0xb0, 0x4b, 0x0b,
0xc3, 0x9c, 0x1e, 0x87, 0x6b, 0x19, 0x3b, 0xfe,
0x55, 0x69, 0x75, 0x3f, 0x88, 0x12, 0x8c, 0xc0,
0x8a, 0xaa, 0x9b, 0x63, 0xd1, 0xa1, 0x6f, 0x80,
0xef, 0x25, 0x54, 0xd7, 0x18, 0x9c, 0x41, 0x1f,
0x58, 0x69, 0xca, 0x52, 0xc5, 0xb8, 0x3f, 0xa3,
0x6f, 0xf2, 0x16, 0xb9, 0xc1, 0xd3, 0x00, 0x62,
0xbe, 0xbc, 0xfd, 0x2d, 0xc5, 0xbc, 0xe0, 0x91,
0x19, 0x34, 0xfd, 0xa7, 0x9a, 0x86, 0xf6, 0xe6,
0x98, 0xce, 0xd7, 0x59, 0xc3, 0xff, 0x9b, 0x64,
0x77, 0x33, 0x8f, 0x3d, 0xa4, 0xf9, 0xcd, 0x85,
0x14, 0xea, 0x99, 0x82, 0xcc, 0xaf, 0xb3, 0x41,
0xb2, 0x38, 0x4d, 0xd9, 0x02, 0xf3, 0xd1, 0xab,
0x7a, 0xc6, 0x1d, 0xd2, 0x9c, 0x6f, 0x21, 0xba,
0x5b, 0x86, 0x2f, 0x37, 0x30, 0xe3, 0x7c, 0xfd,
0xc4, 0xfd, 0x80, 0x6c, 0x22, 0xf2, 0x21
}
};
static const size_t test_lengths[2] =
{
64U,
375U
};
/* Make sure no other definition is already present. */
#undef ASSERT
#define ASSERT( cond, args ) \
do \
{ \
if( ! ( cond ) ) \
{ \
if( verbose != 0 ) \
mbedtls_printf args; \
\
return( -1 ); \
} \
} \
while( 0 )
2021-07-05 21:03:50 +00:00
/**
* \brief The ChaCha20 checkup routine.
*
* \return \c 0 on success.
* \return \c 1 on failure.
*/
2021-06-15 18:39:36 +00:00
int mbedtls_chacha20_self_test( int verbose )
{
unsigned char output[381];
unsigned i;
int ret = MBEDTLS_ERR_THIS_CORRUPTION;
2021-06-15 18:39:36 +00:00
for( i = 0U; i < 2U; i++ )
{
if( verbose != 0 )
mbedtls_printf( " ChaCha20 test %u ", i );
ret = mbedtls_chacha20_crypt( test_keys[i],
test_nonces[i],
test_counters[i],
test_lengths[i],
test_input[i],
output );
ASSERT( 0 == ret, ( "error code: %i\n", ret ) );
Make numerous improvements - Python static hello world now 1.8mb - Python static fully loaded now 10mb - Python HTTPS client now uses MbedTLS - Python REPL now completes import stmts - Increase stack size for Python for now - Begin synthesizing posixpath and ntpath - Restore Python \N{UNICODE NAME} support - Restore Python NFKD symbol normalization - Add optimized code path for Intel SHA-NI - Get more Python unit tests passing faster - Get Python help() pagination working on NT - Python hashlib now supports MbedTLS PBKDF2 - Make memcpy/memmove/memcmp/bcmp/etc. faster - Add Mersenne Twister and Vigna to LIBC_RAND - Provide privileged __printf() for error code - Fix zipos opendir() so that it reports ENOTDIR - Add basic chmod() implementation for Windows NT - Add Cosmo's best functions to Python cosmo module - Pin function trace indent depth to that of caller - Show memory diagram on invalid access in MODE=dbg - Differentiate stack overflow on crash in MODE=dbg - Add stb_truetype and tools for analyzing font files - Upgrade to UNICODE 13 and reduce its binary footprint - COMPILE.COM now logs resource usage of build commands - Start implementing basic poll() support on bare metal - Set getauxval(AT_EXECFN) to GetModuleFileName() on NT - Add descriptions to strerror() in non-TINY build modes - Add COUNTBRANCH() macro to help with micro-optimizations - Make error / backtrace / asan / memory code more unbreakable - Add fast perfect C implementation of μ-Law and a-Law audio codecs - Make strtol() functions consistent with other libc implementations - Improve Linenoise implementation (see also github.com/jart/bestline) - COMPILE.COM now suppresses stdout/stderr of successful build commands
2021-09-28 05:58:51 +00:00
ASSERT( 0 == timingsafe_bcmp( output, test_output[i], test_lengths[i] ),
2021-06-15 18:39:36 +00:00
( "failed (output)\n" ) );
if( verbose != 0 )
mbedtls_printf( "passed\n" );
}
if( verbose != 0 )
mbedtls_printf( "\n" );
return( 0 );
}
#endif /* MBEDTLS_SELF_TEST */