cosmopolitan/third_party/mbedtls/aes.c

1893 lines
69 KiB
C
Raw Normal View History

/*-*- mode:c;indent-tabs-mode:nil;c-basic-offset:4;tab-width:4;coding:utf-8 -*-│
vi: set net ft=c ts=2 sts=2 sw=2 fenc=utf-8 :vi
Copyright The Mbed TLS Contributors
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0 │
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
2022-08-11 19:13:18 +00:00
#include "libc/intrin/bits.h"
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
#include "libc/nexgen32e/x86feature.h"
#include "libc/str/str.h"
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
#include "third_party/mbedtls/aes.h"
#include "third_party/mbedtls/aesni.h"
#include "third_party/mbedtls/common.h"
#include "third_party/mbedtls/error.h"
#include "third_party/mbedtls/platform.h"
2021-06-16 03:18:59 +00:00
asm(".ident\t\"\\n\\n\
Mbed TLS (Apache 2.0)\\n\
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
Copyright ARM Limited\\n\
Copyright Mbed TLS Contributors\"");
2021-06-16 03:18:59 +00:00
asm(".include \"libc/disclaimer.inc\"");
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
/* clang-format off */
2021-06-16 03:18:59 +00:00
/**
* @fileoverview FIPS-197 compliant AES implementation
2021-06-15 18:39:36 +00:00
*
* The AES block cipher was designed by Vincent Rijmen and Joan Daemen.
* The true name of this algorithm is Rijndael.
*
* @see http://csrc.nist.gov/encryption/aes/rijndael/Rijndael.pdf
* @see http://csrc.nist.gov/publications/fips/fips197/fips-197.pdf
2021-06-15 18:39:36 +00:00
*/
#if defined(MBEDTLS_AES_C)
#if !defined(MBEDTLS_AES_ALT)
#define AES_VALIDATE_RET( cond ) \
MBEDTLS_INTERNAL_VALIDATE_RET( cond, MBEDTLS_ERR_AES_BAD_INPUT_DATA )
#define AES_VALIDATE( cond ) \
MBEDTLS_INTERNAL_VALIDATE( cond )
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
#define GET_UINT32_LE(n,b,i) (n) = READ32LE((b) + (i))
#define PUT_UINT32_LE(n,b,i) WRITE32LE((b) + (i), n)
2021-06-15 18:39:36 +00:00
#if defined(MBEDTLS_PADLOCK_C) && \
( defined(MBEDTLS_HAVE_X86) || defined(MBEDTLS_PADLOCK_ALIGN16) )
static int aes_padlock_ace = -1;
#endif
#if defined(MBEDTLS_AES_ROM_TABLES)
/*
* Forward S-box
*/
static const unsigned char FSb[256] =
{
0x63, 0x7C, 0x77, 0x7B, 0xF2, 0x6B, 0x6F, 0xC5,
0x30, 0x01, 0x67, 0x2B, 0xFE, 0xD7, 0xAB, 0x76,
0xCA, 0x82, 0xC9, 0x7D, 0xFA, 0x59, 0x47, 0xF0,
0xAD, 0xD4, 0xA2, 0xAF, 0x9C, 0xA4, 0x72, 0xC0,
0xB7, 0xFD, 0x93, 0x26, 0x36, 0x3F, 0xF7, 0xCC,
0x34, 0xA5, 0xE5, 0xF1, 0x71, 0xD8, 0x31, 0x15,
0x04, 0xC7, 0x23, 0xC3, 0x18, 0x96, 0x05, 0x9A,
0x07, 0x12, 0x80, 0xE2, 0xEB, 0x27, 0xB2, 0x75,
0x09, 0x83, 0x2C, 0x1A, 0x1B, 0x6E, 0x5A, 0xA0,
0x52, 0x3B, 0xD6, 0xB3, 0x29, 0xE3, 0x2F, 0x84,
0x53, 0xD1, 0x00, 0xED, 0x20, 0xFC, 0xB1, 0x5B,
0x6A, 0xCB, 0xBE, 0x39, 0x4A, 0x4C, 0x58, 0xCF,
0xD0, 0xEF, 0xAA, 0xFB, 0x43, 0x4D, 0x33, 0x85,
0x45, 0xF9, 0x02, 0x7F, 0x50, 0x3C, 0x9F, 0xA8,
0x51, 0xA3, 0x40, 0x8F, 0x92, 0x9D, 0x38, 0xF5,
0xBC, 0xB6, 0xDA, 0x21, 0x10, 0xFF, 0xF3, 0xD2,
0xCD, 0x0C, 0x13, 0xEC, 0x5F, 0x97, 0x44, 0x17,
0xC4, 0xA7, 0x7E, 0x3D, 0x64, 0x5D, 0x19, 0x73,
0x60, 0x81, 0x4F, 0xDC, 0x22, 0x2A, 0x90, 0x88,
0x46, 0xEE, 0xB8, 0x14, 0xDE, 0x5E, 0x0B, 0xDB,
0xE0, 0x32, 0x3A, 0x0A, 0x49, 0x06, 0x24, 0x5C,
0xC2, 0xD3, 0xAC, 0x62, 0x91, 0x95, 0xE4, 0x79,
0xE7, 0xC8, 0x37, 0x6D, 0x8D, 0xD5, 0x4E, 0xA9,
0x6C, 0x56, 0xF4, 0xEA, 0x65, 0x7A, 0xAE, 0x08,
0xBA, 0x78, 0x25, 0x2E, 0x1C, 0xA6, 0xB4, 0xC6,
0xE8, 0xDD, 0x74, 0x1F, 0x4B, 0xBD, 0x8B, 0x8A,
0x70, 0x3E, 0xB5, 0x66, 0x48, 0x03, 0xF6, 0x0E,
0x61, 0x35, 0x57, 0xB9, 0x86, 0xC1, 0x1D, 0x9E,
0xE1, 0xF8, 0x98, 0x11, 0x69, 0xD9, 0x8E, 0x94,
0x9B, 0x1E, 0x87, 0xE9, 0xCE, 0x55, 0x28, 0xDF,
0x8C, 0xA1, 0x89, 0x0D, 0xBF, 0xE6, 0x42, 0x68,
0x41, 0x99, 0x2D, 0x0F, 0xB0, 0x54, 0xBB, 0x16
};
/*
* Forward tables
*/
#define FT \
\
V(A5,63,63,C6), V(84,7C,7C,F8), V(99,77,77,EE), V(8D,7B,7B,F6), \
V(0D,F2,F2,FF), V(BD,6B,6B,D6), V(B1,6F,6F,DE), V(54,C5,C5,91), \
V(50,30,30,60), V(03,01,01,02), V(A9,67,67,CE), V(7D,2B,2B,56), \
V(19,FE,FE,E7), V(62,D7,D7,B5), V(E6,AB,AB,4D), V(9A,76,76,EC), \
V(45,CA,CA,8F), V(9D,82,82,1F), V(40,C9,C9,89), V(87,7D,7D,FA), \
V(15,FA,FA,EF), V(EB,59,59,B2), V(C9,47,47,8E), V(0B,F0,F0,FB), \
V(EC,AD,AD,41), V(67,D4,D4,B3), V(FD,A2,A2,5F), V(EA,AF,AF,45), \
V(BF,9C,9C,23), V(F7,A4,A4,53), V(96,72,72,E4), V(5B,C0,C0,9B), \
V(C2,B7,B7,75), V(1C,FD,FD,E1), V(AE,93,93,3D), V(6A,26,26,4C), \
V(5A,36,36,6C), V(41,3F,3F,7E), V(02,F7,F7,F5), V(4F,CC,CC,83), \
V(5C,34,34,68), V(F4,A5,A5,51), V(34,E5,E5,D1), V(08,F1,F1,F9), \
V(93,71,71,E2), V(73,D8,D8,AB), V(53,31,31,62), V(3F,15,15,2A), \
V(0C,04,04,08), V(52,C7,C7,95), V(65,23,23,46), V(5E,C3,C3,9D), \
V(28,18,18,30), V(A1,96,96,37), V(0F,05,05,0A), V(B5,9A,9A,2F), \
V(09,07,07,0E), V(36,12,12,24), V(9B,80,80,1B), V(3D,E2,E2,DF), \
V(26,EB,EB,CD), V(69,27,27,4E), V(CD,B2,B2,7F), V(9F,75,75,EA), \
V(1B,09,09,12), V(9E,83,83,1D), V(74,2C,2C,58), V(2E,1A,1A,34), \
V(2D,1B,1B,36), V(B2,6E,6E,DC), V(EE,5A,5A,B4), V(FB,A0,A0,5B), \
V(F6,52,52,A4), V(4D,3B,3B,76), V(61,D6,D6,B7), V(CE,B3,B3,7D), \
V(7B,29,29,52), V(3E,E3,E3,DD), V(71,2F,2F,5E), V(97,84,84,13), \
V(F5,53,53,A6), V(68,D1,D1,B9), V(00,00,00,00), V(2C,ED,ED,C1), \
V(60,20,20,40), V(1F,FC,FC,E3), V(C8,B1,B1,79), V(ED,5B,5B,B6), \
V(BE,6A,6A,D4), V(46,CB,CB,8D), V(D9,BE,BE,67), V(4B,39,39,72), \
V(DE,4A,4A,94), V(D4,4C,4C,98), V(E8,58,58,B0), V(4A,CF,CF,85), \
V(6B,D0,D0,BB), V(2A,EF,EF,C5), V(E5,AA,AA,4F), V(16,FB,FB,ED), \
V(C5,43,43,86), V(D7,4D,4D,9A), V(55,33,33,66), V(94,85,85,11), \
V(CF,45,45,8A), V(10,F9,F9,E9), V(06,02,02,04), V(81,7F,7F,FE), \
V(F0,50,50,A0), V(44,3C,3C,78), V(BA,9F,9F,25), V(E3,A8,A8,4B), \
V(F3,51,51,A2), V(FE,A3,A3,5D), V(C0,40,40,80), V(8A,8F,8F,05), \
V(AD,92,92,3F), V(BC,9D,9D,21), V(48,38,38,70), V(04,F5,F5,F1), \
V(DF,BC,BC,63), V(C1,B6,B6,77), V(75,DA,DA,AF), V(63,21,21,42), \
V(30,10,10,20), V(1A,FF,FF,E5), V(0E,F3,F3,FD), V(6D,D2,D2,BF), \
V(4C,CD,CD,81), V(14,0C,0C,18), V(35,13,13,26), V(2F,EC,EC,C3), \
V(E1,5F,5F,BE), V(A2,97,97,35), V(CC,44,44,88), V(39,17,17,2E), \
V(57,C4,C4,93), V(F2,A7,A7,55), V(82,7E,7E,FC), V(47,3D,3D,7A), \
V(AC,64,64,C8), V(E7,5D,5D,BA), V(2B,19,19,32), V(95,73,73,E6), \
V(A0,60,60,C0), V(98,81,81,19), V(D1,4F,4F,9E), V(7F,DC,DC,A3), \
V(66,22,22,44), V(7E,2A,2A,54), V(AB,90,90,3B), V(83,88,88,0B), \
V(CA,46,46,8C), V(29,EE,EE,C7), V(D3,B8,B8,6B), V(3C,14,14,28), \
V(79,DE,DE,A7), V(E2,5E,5E,BC), V(1D,0B,0B,16), V(76,DB,DB,AD), \
V(3B,E0,E0,DB), V(56,32,32,64), V(4E,3A,3A,74), V(1E,0A,0A,14), \
V(DB,49,49,92), V(0A,06,06,0C), V(6C,24,24,48), V(E4,5C,5C,B8), \
V(5D,C2,C2,9F), V(6E,D3,D3,BD), V(EF,AC,AC,43), V(A6,62,62,C4), \
V(A8,91,91,39), V(A4,95,95,31), V(37,E4,E4,D3), V(8B,79,79,F2), \
V(32,E7,E7,D5), V(43,C8,C8,8B), V(59,37,37,6E), V(B7,6D,6D,DA), \
V(8C,8D,8D,01), V(64,D5,D5,B1), V(D2,4E,4E,9C), V(E0,A9,A9,49), \
V(B4,6C,6C,D8), V(FA,56,56,AC), V(07,F4,F4,F3), V(25,EA,EA,CF), \
V(AF,65,65,CA), V(8E,7A,7A,F4), V(E9,AE,AE,47), V(18,08,08,10), \
V(D5,BA,BA,6F), V(88,78,78,F0), V(6F,25,25,4A), V(72,2E,2E,5C), \
V(24,1C,1C,38), V(F1,A6,A6,57), V(C7,B4,B4,73), V(51,C6,C6,97), \
V(23,E8,E8,CB), V(7C,DD,DD,A1), V(9C,74,74,E8), V(21,1F,1F,3E), \
V(DD,4B,4B,96), V(DC,BD,BD,61), V(86,8B,8B,0D), V(85,8A,8A,0F), \
V(90,70,70,E0), V(42,3E,3E,7C), V(C4,B5,B5,71), V(AA,66,66,CC), \
V(D8,48,48,90), V(05,03,03,06), V(01,F6,F6,F7), V(12,0E,0E,1C), \
V(A3,61,61,C2), V(5F,35,35,6A), V(F9,57,57,AE), V(D0,B9,B9,69), \
V(91,86,86,17), V(58,C1,C1,99), V(27,1D,1D,3A), V(B9,9E,9E,27), \
V(38,E1,E1,D9), V(13,F8,F8,EB), V(B3,98,98,2B), V(33,11,11,22), \
V(BB,69,69,D2), V(70,D9,D9,A9), V(89,8E,8E,07), V(A7,94,94,33), \
V(B6,9B,9B,2D), V(22,1E,1E,3C), V(92,87,87,15), V(20,E9,E9,C9), \
V(49,CE,CE,87), V(FF,55,55,AA), V(78,28,28,50), V(7A,DF,DF,A5), \
V(8F,8C,8C,03), V(F8,A1,A1,59), V(80,89,89,09), V(17,0D,0D,1A), \
V(DA,BF,BF,65), V(31,E6,E6,D7), V(C6,42,42,84), V(B8,68,68,D0), \
V(C3,41,41,82), V(B0,99,99,29), V(77,2D,2D,5A), V(11,0F,0F,1E), \
V(CB,B0,B0,7B), V(FC,54,54,A8), V(D6,BB,BB,6D), V(3A,16,16,2C)
#define V(a,b,c,d) 0x##a##b##c##d
static const uint32_t FT0[256] = { FT };
#undef V
#if !defined(MBEDTLS_AES_FEWER_TABLES)
#define V(a,b,c,d) 0x##b##c##d##a
static const uint32_t FT1[256] = { FT };
#undef V
#define V(a,b,c,d) 0x##c##d##a##b
static const uint32_t FT2[256] = { FT };
#undef V
#define V(a,b,c,d) 0x##d##a##b##c
static const uint32_t FT3[256] = { FT };
#undef V
#endif /* !MBEDTLS_AES_FEWER_TABLES */
#undef FT
/*
* Reverse S-box
*/
static const unsigned char RSb[256] =
{
0x52, 0x09, 0x6A, 0xD5, 0x30, 0x36, 0xA5, 0x38,
0xBF, 0x40, 0xA3, 0x9E, 0x81, 0xF3, 0xD7, 0xFB,
0x7C, 0xE3, 0x39, 0x82, 0x9B, 0x2F, 0xFF, 0x87,
0x34, 0x8E, 0x43, 0x44, 0xC4, 0xDE, 0xE9, 0xCB,
0x54, 0x7B, 0x94, 0x32, 0xA6, 0xC2, 0x23, 0x3D,
0xEE, 0x4C, 0x95, 0x0B, 0x42, 0xFA, 0xC3, 0x4E,
0x08, 0x2E, 0xA1, 0x66, 0x28, 0xD9, 0x24, 0xB2,
0x76, 0x5B, 0xA2, 0x49, 0x6D, 0x8B, 0xD1, 0x25,
0x72, 0xF8, 0xF6, 0x64, 0x86, 0x68, 0x98, 0x16,
0xD4, 0xA4, 0x5C, 0xCC, 0x5D, 0x65, 0xB6, 0x92,
0x6C, 0x70, 0x48, 0x50, 0xFD, 0xED, 0xB9, 0xDA,
0x5E, 0x15, 0x46, 0x57, 0xA7, 0x8D, 0x9D, 0x84,
0x90, 0xD8, 0xAB, 0x00, 0x8C, 0xBC, 0xD3, 0x0A,
0xF7, 0xE4, 0x58, 0x05, 0xB8, 0xB3, 0x45, 0x06,
0xD0, 0x2C, 0x1E, 0x8F, 0xCA, 0x3F, 0x0F, 0x02,
0xC1, 0xAF, 0xBD, 0x03, 0x01, 0x13, 0x8A, 0x6B,
0x3A, 0x91, 0x11, 0x41, 0x4F, 0x67, 0xDC, 0xEA,
0x97, 0xF2, 0xCF, 0xCE, 0xF0, 0xB4, 0xE6, 0x73,
0x96, 0xAC, 0x74, 0x22, 0xE7, 0xAD, 0x35, 0x85,
0xE2, 0xF9, 0x37, 0xE8, 0x1C, 0x75, 0xDF, 0x6E,
0x47, 0xF1, 0x1A, 0x71, 0x1D, 0x29, 0xC5, 0x89,
0x6F, 0xB7, 0x62, 0x0E, 0xAA, 0x18, 0xBE, 0x1B,
0xFC, 0x56, 0x3E, 0x4B, 0xC6, 0xD2, 0x79, 0x20,
0x9A, 0xDB, 0xC0, 0xFE, 0x78, 0xCD, 0x5A, 0xF4,
0x1F, 0xDD, 0xA8, 0x33, 0x88, 0x07, 0xC7, 0x31,
0xB1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xEC, 0x5F,
0x60, 0x51, 0x7F, 0xA9, 0x19, 0xB5, 0x4A, 0x0D,
0x2D, 0xE5, 0x7A, 0x9F, 0x93, 0xC9, 0x9C, 0xEF,
0xA0, 0xE0, 0x3B, 0x4D, 0xAE, 0x2A, 0xF5, 0xB0,
0xC8, 0xEB, 0xBB, 0x3C, 0x83, 0x53, 0x99, 0x61,
0x17, 0x2B, 0x04, 0x7E, 0xBA, 0x77, 0xD6, 0x26,
0xE1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0C, 0x7D
};
/*
* Reverse tables
*/
#define RT \
\
V(50,A7,F4,51), V(53,65,41,7E), V(C3,A4,17,1A), V(96,5E,27,3A), \
V(CB,6B,AB,3B), V(F1,45,9D,1F), V(AB,58,FA,AC), V(93,03,E3,4B), \
V(55,FA,30,20), V(F6,6D,76,AD), V(91,76,CC,88), V(25,4C,02,F5), \
V(FC,D7,E5,4F), V(D7,CB,2A,C5), V(80,44,35,26), V(8F,A3,62,B5), \
V(49,5A,B1,DE), V(67,1B,BA,25), V(98,0E,EA,45), V(E1,C0,FE,5D), \
V(02,75,2F,C3), V(12,F0,4C,81), V(A3,97,46,8D), V(C6,F9,D3,6B), \
V(E7,5F,8F,03), V(95,9C,92,15), V(EB,7A,6D,BF), V(DA,59,52,95), \
V(2D,83,BE,D4), V(D3,21,74,58), V(29,69,E0,49), V(44,C8,C9,8E), \
V(6A,89,C2,75), V(78,79,8E,F4), V(6B,3E,58,99), V(DD,71,B9,27), \
V(B6,4F,E1,BE), V(17,AD,88,F0), V(66,AC,20,C9), V(B4,3A,CE,7D), \
V(18,4A,DF,63), V(82,31,1A,E5), V(60,33,51,97), V(45,7F,53,62), \
V(E0,77,64,B1), V(84,AE,6B,BB), V(1C,A0,81,FE), V(94,2B,08,F9), \
V(58,68,48,70), V(19,FD,45,8F), V(87,6C,DE,94), V(B7,F8,7B,52), \
V(23,D3,73,AB), V(E2,02,4B,72), V(57,8F,1F,E3), V(2A,AB,55,66), \
V(07,28,EB,B2), V(03,C2,B5,2F), V(9A,7B,C5,86), V(A5,08,37,D3), \
V(F2,87,28,30), V(B2,A5,BF,23), V(BA,6A,03,02), V(5C,82,16,ED), \
V(2B,1C,CF,8A), V(92,B4,79,A7), V(F0,F2,07,F3), V(A1,E2,69,4E), \
V(CD,F4,DA,65), V(D5,BE,05,06), V(1F,62,34,D1), V(8A,FE,A6,C4), \
V(9D,53,2E,34), V(A0,55,F3,A2), V(32,E1,8A,05), V(75,EB,F6,A4), \
V(39,EC,83,0B), V(AA,EF,60,40), V(06,9F,71,5E), V(51,10,6E,BD), \
V(F9,8A,21,3E), V(3D,06,DD,96), V(AE,05,3E,DD), V(46,BD,E6,4D), \
V(B5,8D,54,91), V(05,5D,C4,71), V(6F,D4,06,04), V(FF,15,50,60), \
V(24,FB,98,19), V(97,E9,BD,D6), V(CC,43,40,89), V(77,9E,D9,67), \
V(BD,42,E8,B0), V(88,8B,89,07), V(38,5B,19,E7), V(DB,EE,C8,79), \
V(47,0A,7C,A1), V(E9,0F,42,7C), V(C9,1E,84,F8), V(00,00,00,00), \
V(83,86,80,09), V(48,ED,2B,32), V(AC,70,11,1E), V(4E,72,5A,6C), \
V(FB,FF,0E,FD), V(56,38,85,0F), V(1E,D5,AE,3D), V(27,39,2D,36), \
V(64,D9,0F,0A), V(21,A6,5C,68), V(D1,54,5B,9B), V(3A,2E,36,24), \
V(B1,67,0A,0C), V(0F,E7,57,93), V(D2,96,EE,B4), V(9E,91,9B,1B), \
V(4F,C5,C0,80), V(A2,20,DC,61), V(69,4B,77,5A), V(16,1A,12,1C), \
V(0A,BA,93,E2), V(E5,2A,A0,C0), V(43,E0,22,3C), V(1D,17,1B,12), \
V(0B,0D,09,0E), V(AD,C7,8B,F2), V(B9,A8,B6,2D), V(C8,A9,1E,14), \
V(85,19,F1,57), V(4C,07,75,AF), V(BB,DD,99,EE), V(FD,60,7F,A3), \
V(9F,26,01,F7), V(BC,F5,72,5C), V(C5,3B,66,44), V(34,7E,FB,5B), \
V(76,29,43,8B), V(DC,C6,23,CB), V(68,FC,ED,B6), V(63,F1,E4,B8), \
V(CA,DC,31,D7), V(10,85,63,42), V(40,22,97,13), V(20,11,C6,84), \
V(7D,24,4A,85), V(F8,3D,BB,D2), V(11,32,F9,AE), V(6D,A1,29,C7), \
V(4B,2F,9E,1D), V(F3,30,B2,DC), V(EC,52,86,0D), V(D0,E3,C1,77), \
V(6C,16,B3,2B), V(99,B9,70,A9), V(FA,48,94,11), V(22,64,E9,47), \
V(C4,8C,FC,A8), V(1A,3F,F0,A0), V(D8,2C,7D,56), V(EF,90,33,22), \
V(C7,4E,49,87), V(C1,D1,38,D9), V(FE,A2,CA,8C), V(36,0B,D4,98), \
V(CF,81,F5,A6), V(28,DE,7A,A5), V(26,8E,B7,DA), V(A4,BF,AD,3F), \
V(E4,9D,3A,2C), V(0D,92,78,50), V(9B,CC,5F,6A), V(62,46,7E,54), \
V(C2,13,8D,F6), V(E8,B8,D8,90), V(5E,F7,39,2E), V(F5,AF,C3,82), \
V(BE,80,5D,9F), V(7C,93,D0,69), V(A9,2D,D5,6F), V(B3,12,25,CF), \
V(3B,99,AC,C8), V(A7,7D,18,10), V(6E,63,9C,E8), V(7B,BB,3B,DB), \
V(09,78,26,CD), V(F4,18,59,6E), V(01,B7,9A,EC), V(A8,9A,4F,83), \
V(65,6E,95,E6), V(7E,E6,FF,AA), V(08,CF,BC,21), V(E6,E8,15,EF), \
V(D9,9B,E7,BA), V(CE,36,6F,4A), V(D4,09,9F,EA), V(D6,7C,B0,29), \
V(AF,B2,A4,31), V(31,23,3F,2A), V(30,94,A5,C6), V(C0,66,A2,35), \
V(37,BC,4E,74), V(A6,CA,82,FC), V(B0,D0,90,E0), V(15,D8,A7,33), \
V(4A,98,04,F1), V(F7,DA,EC,41), V(0E,50,CD,7F), V(2F,F6,91,17), \
V(8D,D6,4D,76), V(4D,B0,EF,43), V(54,4D,AA,CC), V(DF,04,96,E4), \
V(E3,B5,D1,9E), V(1B,88,6A,4C), V(B8,1F,2C,C1), V(7F,51,65,46), \
V(04,EA,5E,9D), V(5D,35,8C,01), V(73,74,87,FA), V(2E,41,0B,FB), \
V(5A,1D,67,B3), V(52,D2,DB,92), V(33,56,10,E9), V(13,47,D6,6D), \
V(8C,61,D7,9A), V(7A,0C,A1,37), V(8E,14,F8,59), V(89,3C,13,EB), \
V(EE,27,A9,CE), V(35,C9,61,B7), V(ED,E5,1C,E1), V(3C,B1,47,7A), \
V(59,DF,D2,9C), V(3F,73,F2,55), V(79,CE,14,18), V(BF,37,C7,73), \
V(EA,CD,F7,53), V(5B,AA,FD,5F), V(14,6F,3D,DF), V(86,DB,44,78), \
V(81,F3,AF,CA), V(3E,C4,68,B9), V(2C,34,24,38), V(5F,40,A3,C2), \
V(72,C3,1D,16), V(0C,25,E2,BC), V(8B,49,3C,28), V(41,95,0D,FF), \
V(71,01,A8,39), V(DE,B3,0C,08), V(9C,E4,B4,D8), V(90,C1,56,64), \
V(61,84,CB,7B), V(70,B6,32,D5), V(74,5C,6C,48), V(42,57,B8,D0)
#define V(a,b,c,d) 0x##a##b##c##d
static const uint32_t RT0[256] = { RT };
#undef V
#if !defined(MBEDTLS_AES_FEWER_TABLES)
#define V(a,b,c,d) 0x##b##c##d##a
static const uint32_t RT1[256] = { RT };
#undef V
#define V(a,b,c,d) 0x##c##d##a##b
static const uint32_t RT2[256] = { RT };
#undef V
#define V(a,b,c,d) 0x##d##a##b##c
static const uint32_t RT3[256] = { RT };
#undef V
#endif /* !MBEDTLS_AES_FEWER_TABLES */
#undef RT
/*
* Round constants
*/
static const uint32_t RCON[10] =
{
0x00000001, 0x00000002, 0x00000004, 0x00000008,
0x00000010, 0x00000020, 0x00000040, 0x00000080,
0x0000001B, 0x00000036
};
#else /* MBEDTLS_AES_ROM_TABLES */
/*
* Forward S-box & tables
*/
static unsigned char FSb[256];
static uint32_t FT0[256];
#if !defined(MBEDTLS_AES_FEWER_TABLES)
static uint32_t FT1[256];
static uint32_t FT2[256];
static uint32_t FT3[256];
#endif /* !MBEDTLS_AES_FEWER_TABLES */
/*
* Reverse S-box & tables
*/
static unsigned char RSb[256];
static uint32_t RT0[256];
#if !defined(MBEDTLS_AES_FEWER_TABLES)
static uint32_t RT1[256];
static uint32_t RT2[256];
static uint32_t RT3[256];
#endif /* !MBEDTLS_AES_FEWER_TABLES */
/*
* Round constants
*/
static uint32_t RCON[10];
/*
* Tables generation code
*/
#define ROTL8(x) ( ( (x) << 8 ) & 0xFFFFFFFF ) | ( (x) >> 24 )
#define XTIME(x) ( ( (x) << 1 ) ^ ( ( (x) & 0x80 ) ? 0x1B : 0x00 ) )
#define MUL(x,y) ( ( (x) && (y) ) ? pow[(log[(x)]+log[(y)]) % 255] : 0 )
Make numerous improvements - Python static hello world now 1.8mb - Python static fully loaded now 10mb - Python HTTPS client now uses MbedTLS - Python REPL now completes import stmts - Increase stack size for Python for now - Begin synthesizing posixpath and ntpath - Restore Python \N{UNICODE NAME} support - Restore Python NFKD symbol normalization - Add optimized code path for Intel SHA-NI - Get more Python unit tests passing faster - Get Python help() pagination working on NT - Python hashlib now supports MbedTLS PBKDF2 - Make memcpy/memmove/memcmp/bcmp/etc. faster - Add Mersenne Twister and Vigna to LIBC_RAND - Provide privileged __printf() for error code - Fix zipos opendir() so that it reports ENOTDIR - Add basic chmod() implementation for Windows NT - Add Cosmo's best functions to Python cosmo module - Pin function trace indent depth to that of caller - Show memory diagram on invalid access in MODE=dbg - Differentiate stack overflow on crash in MODE=dbg - Add stb_truetype and tools for analyzing font files - Upgrade to UNICODE 13 and reduce its binary footprint - COMPILE.COM now logs resource usage of build commands - Start implementing basic poll() support on bare metal - Set getauxval(AT_EXECFN) to GetModuleFileName() on NT - Add descriptions to strerror() in non-TINY build modes - Add COUNTBRANCH() macro to help with micro-optimizations - Make error / backtrace / asan / memory code more unbreakable - Add fast perfect C implementation of μ-Law and a-Law audio codecs - Make strtol() functions consistent with other libc implementations - Improve Linenoise implementation (see also github.com/jart/bestline) - COMPILE.COM now suppresses stdout/stderr of successful build commands
2021-09-28 05:58:51 +00:00
static int aes_init_done;
2021-06-15 18:39:36 +00:00
static dontinline void aes_gen_tables( void )
2021-06-15 18:39:36 +00:00
{
int i, x, y, z;
int pow[256];
int log[256];
/*
* compute pow and log tables over GF(2^8)
*/
for( i = 0, x = 1; i < 256; i++ )
{
pow[i] = x;
log[x] = i;
x = ( x ^ XTIME( x ) ) & 0xFF;
}
/*
* calculate the round constants
*/
for( i = 0, x = 1; i < 10; i++ )
{
RCON[i] = (uint32_t) x;
x = XTIME( x ) & 0xFF;
}
/*
* generate the forward and reverse S-boxes
*/
FSb[0x00] = 0x63;
RSb[0x63] = 0x00;
for( i = 1; i < 256; i++ )
{
x = pow[255 - log[i]];
y = x; y = ( ( y << 1 ) | ( y >> 7 ) ) & 0xFF;
x ^= y; y = ( ( y << 1 ) | ( y >> 7 ) ) & 0xFF;
x ^= y; y = ( ( y << 1 ) | ( y >> 7 ) ) & 0xFF;
x ^= y; y = ( ( y << 1 ) | ( y >> 7 ) ) & 0xFF;
x ^= y ^ 0x63;
FSb[i] = (unsigned char) x;
RSb[x] = (unsigned char) i;
}
/*
* generate the forward and reverse tables
*/
for( i = 0; i < 256; i++ )
{
x = FSb[i];
y = XTIME( x ) & 0xFF;
z = ( y ^ x ) & 0xFF;
FT0[i] = ( (uint32_t) y ) ^
( (uint32_t) x << 8 ) ^
( (uint32_t) x << 16 ) ^
( (uint32_t) z << 24 );
#if !defined(MBEDTLS_AES_FEWER_TABLES)
FT1[i] = ROTL8( FT0[i] );
FT2[i] = ROTL8( FT1[i] );
FT3[i] = ROTL8( FT2[i] );
#endif /* !MBEDTLS_AES_FEWER_TABLES */
x = RSb[i];
RT0[i] = ( (uint32_t) MUL( 0x0E, x ) ) ^
( (uint32_t) MUL( 0x09, x ) << 8 ) ^
( (uint32_t) MUL( 0x0D, x ) << 16 ) ^
( (uint32_t) MUL( 0x0B, x ) << 24 );
#if !defined(MBEDTLS_AES_FEWER_TABLES)
RT1[i] = ROTL8( RT0[i] );
RT2[i] = ROTL8( RT1[i] );
RT3[i] = ROTL8( RT2[i] );
#endif /* !MBEDTLS_AES_FEWER_TABLES */
}
}
#undef ROTL8
#endif /* MBEDTLS_AES_ROM_TABLES */
#if defined(MBEDTLS_AES_FEWER_TABLES)
#define ROTL8(x) ( (uint32_t)( ( x ) << 8 ) + (uint32_t)( ( x ) >> 24 ) )
#define ROTL16(x) ( (uint32_t)( ( x ) << 16 ) + (uint32_t)( ( x ) >> 16 ) )
#define ROTL24(x) ( (uint32_t)( ( x ) << 24 ) + (uint32_t)( ( x ) >> 8 ) )
#define AES_RT0(idx) RT0[idx]
#define AES_RT1(idx) ROTL8( RT0[idx] )
#define AES_RT2(idx) ROTL16( RT0[idx] )
#define AES_RT3(idx) ROTL24( RT0[idx] )
#define AES_FT0(idx) FT0[idx]
#define AES_FT1(idx) ROTL8( FT0[idx] )
#define AES_FT2(idx) ROTL16( FT0[idx] )
#define AES_FT3(idx) ROTL24( FT0[idx] )
#else /* MBEDTLS_AES_FEWER_TABLES */
#define AES_RT0(idx) RT0[idx]
#define AES_RT1(idx) RT1[idx]
#define AES_RT2(idx) RT2[idx]
#define AES_RT3(idx) RT3[idx]
#define AES_FT0(idx) FT0[idx]
#define AES_FT1(idx) FT1[idx]
#define AES_FT2(idx) FT2[idx]
#define AES_FT3(idx) FT3[idx]
#endif /* MBEDTLS_AES_FEWER_TABLES */
void mbedtls_aes_init( mbedtls_aes_context *ctx )
{
AES_VALIDATE( ctx != NULL );
mbedtls_platform_zeroize( ctx, sizeof( mbedtls_aes_context ) );
2021-06-15 18:39:36 +00:00
}
void mbedtls_aes_free( mbedtls_aes_context *ctx )
{
if( ctx == NULL )
return;
mbedtls_platform_zeroize( ctx, sizeof( mbedtls_aes_context ) );
}
#if defined(MBEDTLS_CIPHER_MODE_XTS)
void mbedtls_aes_xts_init( mbedtls_aes_xts_context *ctx )
{
AES_VALIDATE( ctx != NULL );
mbedtls_aes_init( &ctx->crypt );
mbedtls_aes_init( &ctx->tweak );
}
void mbedtls_aes_xts_free( mbedtls_aes_xts_context *ctx )
{
if( ctx == NULL )
return;
mbedtls_aes_free( &ctx->crypt );
mbedtls_aes_free( &ctx->tweak );
}
#endif /* MBEDTLS_CIPHER_MODE_XTS */
/*
* AES key schedule (encryption)
*/
#if !defined(MBEDTLS_AES_SETKEY_ENC_ALT)
int mbedtls_aes_setkey_enc( mbedtls_aes_context *ctx, const unsigned char *key,
unsigned int keybits )
{
unsigned int i;
uint32_t *RK;
AES_VALIDATE_RET( ctx != NULL );
AES_VALIDATE_RET( key != NULL );
switch( keybits )
{
case 128: ctx->nr = 10; break;
case 192: ctx->nr = 12; break;
case 256: ctx->nr = 14; break;
default : return( MBEDTLS_ERR_AES_INVALID_KEY_LENGTH );
}
#if !defined(MBEDTLS_AES_ROM_TABLES)
if( aes_init_done == 0 )
{
aes_gen_tables();
aes_init_done = 1;
}
#endif
#if defined(MBEDTLS_PADLOCK_C) && defined(MBEDTLS_PADLOCK_ALIGN16)
if( aes_padlock_ace == -1 )
aes_padlock_ace = mbedtls_padlock_has_support( MBEDTLS_PADLOCK_ACE );
if( aes_padlock_ace )
ctx->rk = RK = MBEDTLS_PADLOCK_ALIGN16( ctx->buf );
else
#endif
ctx->rk = RK = ctx->buf;
#if defined(MBEDTLS_AESNI_C) && defined(MBEDTLS_HAVE_X86_64)
if( X86_HAVE( AES ) )
2021-06-15 18:39:36 +00:00
return( mbedtls_aesni_setkey_enc( (unsigned char *) ctx->rk, key, keybits ) );
#endif
for( i = 0; i < ( keybits >> 5 ); i++ )
{
GET_UINT32_LE( RK[i], key, i << 2 );
}
switch( ctx->nr )
{
case 10:
for( i = 0; i < 10; i++, RK += 4 )
{
RK[4] = RK[0] ^ RCON[i] ^
( (uint32_t) FSb[ ( RK[3] >> 8 ) & 0xFF ] ) ^
( (uint32_t) FSb[ ( RK[3] >> 16 ) & 0xFF ] << 8 ) ^
( (uint32_t) FSb[ ( RK[3] >> 24 ) & 0xFF ] << 16 ) ^
( (uint32_t) FSb[ ( RK[3] ) & 0xFF ] << 24 );
RK[5] = RK[1] ^ RK[4];
RK[6] = RK[2] ^ RK[5];
RK[7] = RK[3] ^ RK[6];
}
break;
case 12:
for( i = 0; i < 8; i++, RK += 6 )
{
RK[6] = RK[0] ^ RCON[i] ^
( (uint32_t) FSb[ ( RK[5] >> 8 ) & 0xFF ] ) ^
( (uint32_t) FSb[ ( RK[5] >> 16 ) & 0xFF ] << 8 ) ^
( (uint32_t) FSb[ ( RK[5] >> 24 ) & 0xFF ] << 16 ) ^
( (uint32_t) FSb[ ( RK[5] ) & 0xFF ] << 24 );
RK[7] = RK[1] ^ RK[6];
RK[8] = RK[2] ^ RK[7];
RK[9] = RK[3] ^ RK[8];
RK[10] = RK[4] ^ RK[9];
RK[11] = RK[5] ^ RK[10];
}
break;
case 14:
for( i = 0; i < 7; i++, RK += 8 )
{
RK[8] = RK[0] ^ RCON[i] ^
( (uint32_t) FSb[ ( RK[7] >> 8 ) & 0xFF ] ) ^
( (uint32_t) FSb[ ( RK[7] >> 16 ) & 0xFF ] << 8 ) ^
( (uint32_t) FSb[ ( RK[7] >> 24 ) & 0xFF ] << 16 ) ^
( (uint32_t) FSb[ ( RK[7] ) & 0xFF ] << 24 );
RK[9] = RK[1] ^ RK[8];
RK[10] = RK[2] ^ RK[9];
RK[11] = RK[3] ^ RK[10];
RK[12] = RK[4] ^
( (uint32_t) FSb[ ( RK[11] ) & 0xFF ] ) ^
( (uint32_t) FSb[ ( RK[11] >> 8 ) & 0xFF ] << 8 ) ^
( (uint32_t) FSb[ ( RK[11] >> 16 ) & 0xFF ] << 16 ) ^
( (uint32_t) FSb[ ( RK[11] >> 24 ) & 0xFF ] << 24 );
RK[13] = RK[5] ^ RK[12];
RK[14] = RK[6] ^ RK[13];
RK[15] = RK[7] ^ RK[14];
}
break;
}
return( 0 );
}
#endif /* !MBEDTLS_AES_SETKEY_ENC_ALT */
/*
* AES key schedule (decryption)
*/
#if !defined(MBEDTLS_AES_SETKEY_DEC_ALT)
int mbedtls_aes_setkey_dec( mbedtls_aes_context *ctx, const unsigned char *key,
unsigned int keybits )
{
int i, j, ret;
mbedtls_aes_context cty;
uint32_t *RK;
uint32_t *SK;
AES_VALIDATE_RET( ctx != NULL );
AES_VALIDATE_RET( key != NULL );
mbedtls_aes_init( &cty );
#if defined(MBEDTLS_PADLOCK_C) && defined(MBEDTLS_PADLOCK_ALIGN16)
if( aes_padlock_ace == -1 )
aes_padlock_ace = mbedtls_padlock_has_support( MBEDTLS_PADLOCK_ACE );
if( aes_padlock_ace )
ctx->rk = RK = MBEDTLS_PADLOCK_ALIGN16( ctx->buf );
else
#endif
ctx->rk = RK = ctx->buf;
/* Also checks keybits */
if( ( ret = mbedtls_aes_setkey_enc( &cty, key, keybits ) ) != 0 )
goto exit;
ctx->nr = cty.nr;
#if defined(MBEDTLS_AESNI_C) && defined(MBEDTLS_HAVE_X86_64)
if( X86_HAVE( AES ) )
2021-06-15 18:39:36 +00:00
{
mbedtls_aesni_inverse_key( (unsigned char *) ctx->rk,
(const unsigned char *) cty.rk, ctx->nr );
goto exit;
}
#endif
SK = cty.rk + cty.nr * 4;
*RK++ = *SK++;
*RK++ = *SK++;
*RK++ = *SK++;
*RK++ = *SK++;
for( i = ctx->nr - 1, SK -= 8; i > 0; i--, SK -= 8 )
{
for( j = 0; j < 4; j++, SK++ )
{
*RK++ = AES_RT0( FSb[ ( *SK ) & 0xFF ] ) ^
AES_RT1( FSb[ ( *SK >> 8 ) & 0xFF ] ) ^
AES_RT2( FSb[ ( *SK >> 16 ) & 0xFF ] ) ^
AES_RT3( FSb[ ( *SK >> 24 ) & 0xFF ] );
}
}
*RK++ = *SK++;
*RK++ = *SK++;
*RK++ = *SK++;
*RK++ = *SK++;
exit:
mbedtls_aes_free( &cty );
return( ret );
}
#endif /* !MBEDTLS_AES_SETKEY_DEC_ALT */
#if defined(MBEDTLS_CIPHER_MODE_XTS)
static int mbedtls_aes_xts_decode_keys( const unsigned char *key,
unsigned int keybits,
const unsigned char **key1,
unsigned int *key1bits,
const unsigned char **key2,
unsigned int *key2bits )
{
const unsigned int half_keybits = keybits / 2;
const unsigned int half_keybytes = half_keybits / 8;
switch( keybits )
{
case 256: break;
case 512: break;
default : return( MBEDTLS_ERR_AES_INVALID_KEY_LENGTH );
}
*key1bits = half_keybits;
*key2bits = half_keybits;
*key1 = &key[0];
*key2 = &key[half_keybytes];
return 0;
}
int mbedtls_aes_xts_setkey_enc( mbedtls_aes_xts_context *ctx,
const unsigned char *key,
unsigned int keybits)
{
int ret = MBEDTLS_ERR_THIS_CORRUPTION;
2021-06-15 18:39:36 +00:00
const unsigned char *key1, *key2;
unsigned int key1bits, key2bits;
AES_VALIDATE_RET( ctx != NULL );
AES_VALIDATE_RET( key != NULL );
ret = mbedtls_aes_xts_decode_keys( key, keybits, &key1, &key1bits,
&key2, &key2bits );
if( ret != 0 )
return( ret );
/* Set the tweak key. Always set tweak key for the encryption mode. */
ret = mbedtls_aes_setkey_enc( &ctx->tweak, key2, key2bits );
if( ret != 0 )
return( ret );
/* Set crypt key for encryption. */
return mbedtls_aes_setkey_enc( &ctx->crypt, key1, key1bits );
}
int mbedtls_aes_xts_setkey_dec( mbedtls_aes_xts_context *ctx,
const unsigned char *key,
unsigned int keybits)
{
int ret = MBEDTLS_ERR_THIS_CORRUPTION;
2021-06-15 18:39:36 +00:00
const unsigned char *key1, *key2;
unsigned int key1bits, key2bits;
AES_VALIDATE_RET( ctx != NULL );
AES_VALIDATE_RET( key != NULL );
ret = mbedtls_aes_xts_decode_keys( key, keybits, &key1, &key1bits,
&key2, &key2bits );
if( ret != 0 )
return( ret );
/* Set the tweak key. Always set tweak key for encryption. */
ret = mbedtls_aes_setkey_enc( &ctx->tweak, key2, key2bits );
if( ret != 0 )
return( ret );
/* Set crypt key for decryption. */
return mbedtls_aes_setkey_dec( &ctx->crypt, key1, key1bits );
}
#endif /* MBEDTLS_CIPHER_MODE_XTS */
#define AES_FROUND(X0,X1,X2,X3,Y0,Y1,Y2,Y3) \
do \
{ \
(X0) = *RK++ ^ AES_FT0( ( (Y0) ) & 0xFF ) ^ \
AES_FT1( ( (Y1) >> 8 ) & 0xFF ) ^ \
AES_FT2( ( (Y2) >> 16 ) & 0xFF ) ^ \
AES_FT3( ( (Y3) >> 24 ) & 0xFF ); \
(X1) = *RK++ ^ AES_FT0( ( (Y1) ) & 0xFF ) ^ \
AES_FT1( ( (Y2) >> 8 ) & 0xFF ) ^ \
AES_FT2( ( (Y3) >> 16 ) & 0xFF ) ^ \
AES_FT3( ( (Y0) >> 24 ) & 0xFF ); \
(X2) = *RK++ ^ AES_FT0( ( (Y2) ) & 0xFF ) ^ \
AES_FT1( ( (Y3) >> 8 ) & 0xFF ) ^ \
AES_FT2( ( (Y0) >> 16 ) & 0xFF ) ^ \
AES_FT3( ( (Y1) >> 24 ) & 0xFF ); \
(X3) = *RK++ ^ AES_FT0( ( (Y3) ) & 0xFF ) ^ \
AES_FT1( ( (Y0) >> 8 ) & 0xFF ) ^ \
AES_FT2( ( (Y1) >> 16 ) & 0xFF ) ^ \
AES_FT3( ( (Y2) >> 24 ) & 0xFF ); \
} while( 0 )
#define AES_RROUND(X0,X1,X2,X3,Y0,Y1,Y2,Y3) \
do \
{ \
(X0) = *RK++ ^ AES_RT0( ( (Y0) ) & 0xFF ) ^ \
AES_RT1( ( (Y3) >> 8 ) & 0xFF ) ^ \
AES_RT2( ( (Y2) >> 16 ) & 0xFF ) ^ \
AES_RT3( ( (Y1) >> 24 ) & 0xFF ); \
(X1) = *RK++ ^ AES_RT0( ( (Y1) ) & 0xFF ) ^ \
AES_RT1( ( (Y0) >> 8 ) & 0xFF ) ^ \
AES_RT2( ( (Y3) >> 16 ) & 0xFF ) ^ \
AES_RT3( ( (Y2) >> 24 ) & 0xFF ); \
(X2) = *RK++ ^ AES_RT0( ( (Y2) ) & 0xFF ) ^ \
AES_RT1( ( (Y1) >> 8 ) & 0xFF ) ^ \
AES_RT2( ( (Y0) >> 16 ) & 0xFF ) ^ \
AES_RT3( ( (Y3) >> 24 ) & 0xFF ); \
(X3) = *RK++ ^ AES_RT0( ( (Y3) ) & 0xFF ) ^ \
AES_RT1( ( (Y2) >> 8 ) & 0xFF ) ^ \
AES_RT2( ( (Y1) >> 16 ) & 0xFF ) ^ \
AES_RT3( ( (Y0) >> 24 ) & 0xFF ); \
} while( 0 )
/*
* AES-ECB block encryption
*/
#if !defined(MBEDTLS_AES_ENCRYPT_ALT)
int mbedtls_internal_aes_encrypt( mbedtls_aes_context *ctx,
const unsigned char input[16],
unsigned char output[16] )
{
int i;
uint32_t *RK = ctx->rk;
struct
{
uint32_t X[4];
uint32_t Y[4];
} t;
GET_UINT32_LE( t.X[0], input, 0 ); t.X[0] ^= *RK++;
GET_UINT32_LE( t.X[1], input, 4 ); t.X[1] ^= *RK++;
GET_UINT32_LE( t.X[2], input, 8 ); t.X[2] ^= *RK++;
GET_UINT32_LE( t.X[3], input, 12 ); t.X[3] ^= *RK++;
for( i = ( ctx->nr >> 1 ) - 1; i > 0; i-- )
{
AES_FROUND( t.Y[0], t.Y[1], t.Y[2], t.Y[3], t.X[0], t.X[1], t.X[2], t.X[3] );
AES_FROUND( t.X[0], t.X[1], t.X[2], t.X[3], t.Y[0], t.Y[1], t.Y[2], t.Y[3] );
}
AES_FROUND( t.Y[0], t.Y[1], t.Y[2], t.Y[3], t.X[0], t.X[1], t.X[2], t.X[3] );
t.X[0] = *RK++ ^ \
( (uint32_t) FSb[ ( t.Y[0] ) & 0xFF ] ) ^
( (uint32_t) FSb[ ( t.Y[1] >> 8 ) & 0xFF ] << 8 ) ^
( (uint32_t) FSb[ ( t.Y[2] >> 16 ) & 0xFF ] << 16 ) ^
( (uint32_t) FSb[ ( t.Y[3] >> 24 ) & 0xFF ] << 24 );
t.X[1] = *RK++ ^ \
( (uint32_t) FSb[ ( t.Y[1] ) & 0xFF ] ) ^
( (uint32_t) FSb[ ( t.Y[2] >> 8 ) & 0xFF ] << 8 ) ^
( (uint32_t) FSb[ ( t.Y[3] >> 16 ) & 0xFF ] << 16 ) ^
( (uint32_t) FSb[ ( t.Y[0] >> 24 ) & 0xFF ] << 24 );
t.X[2] = *RK++ ^ \
( (uint32_t) FSb[ ( t.Y[2] ) & 0xFF ] ) ^
( (uint32_t) FSb[ ( t.Y[3] >> 8 ) & 0xFF ] << 8 ) ^
( (uint32_t) FSb[ ( t.Y[0] >> 16 ) & 0xFF ] << 16 ) ^
( (uint32_t) FSb[ ( t.Y[1] >> 24 ) & 0xFF ] << 24 );
t.X[3] = *RK++ ^ \
( (uint32_t) FSb[ ( t.Y[3] ) & 0xFF ] ) ^
( (uint32_t) FSb[ ( t.Y[0] >> 8 ) & 0xFF ] << 8 ) ^
( (uint32_t) FSb[ ( t.Y[1] >> 16 ) & 0xFF ] << 16 ) ^
( (uint32_t) FSb[ ( t.Y[2] >> 24 ) & 0xFF ] << 24 );
PUT_UINT32_LE( t.X[0], output, 0 );
PUT_UINT32_LE( t.X[1], output, 4 );
PUT_UINT32_LE( t.X[2], output, 8 );
PUT_UINT32_LE( t.X[3], output, 12 );
mbedtls_platform_zeroize( &t, sizeof( t ) );
return( 0 );
}
#endif /* !MBEDTLS_AES_ENCRYPT_ALT */
/*
* AES-ECB block decryption
*/
#if !defined(MBEDTLS_AES_DECRYPT_ALT)
int mbedtls_internal_aes_decrypt( mbedtls_aes_context *ctx,
const unsigned char input[16],
unsigned char output[16] )
{
int i;
uint32_t *RK = ctx->rk;
struct
{
uint32_t X[4];
uint32_t Y[4];
} t;
GET_UINT32_LE( t.X[0], input, 0 ); t.X[0] ^= *RK++;
GET_UINT32_LE( t.X[1], input, 4 ); t.X[1] ^= *RK++;
GET_UINT32_LE( t.X[2], input, 8 ); t.X[2] ^= *RK++;
GET_UINT32_LE( t.X[3], input, 12 ); t.X[3] ^= *RK++;
for( i = ( ctx->nr >> 1 ) - 1; i > 0; i-- )
{
AES_RROUND( t.Y[0], t.Y[1], t.Y[2], t.Y[3], t.X[0], t.X[1], t.X[2], t.X[3] );
AES_RROUND( t.X[0], t.X[1], t.X[2], t.X[3], t.Y[0], t.Y[1], t.Y[2], t.Y[3] );
}
AES_RROUND( t.Y[0], t.Y[1], t.Y[2], t.Y[3], t.X[0], t.X[1], t.X[2], t.X[3] );
t.X[0] = *RK++ ^ \
( (uint32_t) RSb[ ( t.Y[0] ) & 0xFF ] ) ^
( (uint32_t) RSb[ ( t.Y[3] >> 8 ) & 0xFF ] << 8 ) ^
( (uint32_t) RSb[ ( t.Y[2] >> 16 ) & 0xFF ] << 16 ) ^
( (uint32_t) RSb[ ( t.Y[1] >> 24 ) & 0xFF ] << 24 );
t.X[1] = *RK++ ^ \
( (uint32_t) RSb[ ( t.Y[1] ) & 0xFF ] ) ^
( (uint32_t) RSb[ ( t.Y[0] >> 8 ) & 0xFF ] << 8 ) ^
( (uint32_t) RSb[ ( t.Y[3] >> 16 ) & 0xFF ] << 16 ) ^
( (uint32_t) RSb[ ( t.Y[2] >> 24 ) & 0xFF ] << 24 );
t.X[2] = *RK++ ^ \
( (uint32_t) RSb[ ( t.Y[2] ) & 0xFF ] ) ^
( (uint32_t) RSb[ ( t.Y[1] >> 8 ) & 0xFF ] << 8 ) ^
( (uint32_t) RSb[ ( t.Y[0] >> 16 ) & 0xFF ] << 16 ) ^
( (uint32_t) RSb[ ( t.Y[3] >> 24 ) & 0xFF ] << 24 );
t.X[3] = *RK++ ^ \
( (uint32_t) RSb[ ( t.Y[3] ) & 0xFF ] ) ^
( (uint32_t) RSb[ ( t.Y[2] >> 8 ) & 0xFF ] << 8 ) ^
( (uint32_t) RSb[ ( t.Y[1] >> 16 ) & 0xFF ] << 16 ) ^
( (uint32_t) RSb[ ( t.Y[0] >> 24 ) & 0xFF ] << 24 );
PUT_UINT32_LE( t.X[0], output, 0 );
PUT_UINT32_LE( t.X[1], output, 4 );
PUT_UINT32_LE( t.X[2], output, 8 );
PUT_UINT32_LE( t.X[3], output, 12 );
mbedtls_platform_zeroize( &t, sizeof( t ) );
return( 0 );
}
#endif /* !MBEDTLS_AES_DECRYPT_ALT */
/*
* AES-ECB block encryption/decryption
*/
int mbedtls_aes_crypt_ecb( mbedtls_aes_context *ctx,
int mode,
const unsigned char input[16],
unsigned char output[16] )
{
AES_VALIDATE_RET( ctx != NULL );
AES_VALIDATE_RET( input != NULL );
AES_VALIDATE_RET( output != NULL );
AES_VALIDATE_RET( mode == MBEDTLS_AES_ENCRYPT ||
mode == MBEDTLS_AES_DECRYPT );
#if defined(MBEDTLS_AESNI_C) && defined(MBEDTLS_HAVE_X86_64)
if( X86_HAVE( AES ) )
2021-06-15 18:39:36 +00:00
return( mbedtls_aesni_crypt_ecb( ctx, mode, input, output ) );
#endif
#if defined(MBEDTLS_PADLOCK_C) && defined(MBEDTLS_HAVE_X86)
if( aes_padlock_ace )
{
if( mbedtls_padlock_xcryptecb( ctx, mode, input, output ) == 0 )
return( 0 );
// If padlock data misaligned, we just fall back to
// unaccelerated mode
//
}
#endif
if( mode == MBEDTLS_AES_ENCRYPT )
return( mbedtls_internal_aes_encrypt( ctx, input, output ) );
else
return( mbedtls_internal_aes_decrypt( ctx, input, output ) );
}
#if defined(MBEDTLS_CIPHER_MODE_CBC)
/*
* AES-CBC buffer encryption/decryption
*/
int mbedtls_aes_crypt_cbc( mbedtls_aes_context *ctx,
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
int mode,
size_t length,
unsigned char iv[16],
const unsigned char *input,
unsigned char *output )
2021-06-15 18:39:36 +00:00
{
int i;
unsigned char temp[16];
AES_VALIDATE_RET( ctx != NULL );
AES_VALIDATE_RET( mode == MBEDTLS_AES_ENCRYPT ||
mode == MBEDTLS_AES_DECRYPT );
AES_VALIDATE_RET( iv != NULL );
AES_VALIDATE_RET( input != NULL );
AES_VALIDATE_RET( output != NULL );
if( length % 16 )
return( MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH );
#if defined(MBEDTLS_PADLOCK_C) && defined(MBEDTLS_HAVE_X86)
if( aes_padlock_ace )
{
if( mbedtls_padlock_xcryptcbc( ctx, mode, length, iv, input, output ) == 0 )
return( 0 );
// If padlock data misaligned, we just fall back to
// unaccelerated mode
//
}
#endif
if( mode == MBEDTLS_AES_DECRYPT )
{
while( length > 0 )
{
memcpy( temp, input, 16 );
mbedtls_aes_crypt_ecb( ctx, mode, input, output );
for( i = 0; i < 16; i++ )
output[i] = (unsigned char)( output[i] ^ iv[i] );
memcpy( iv, temp, 16 );
input += 16;
output += 16;
length -= 16;
}
}
else
{
while( length > 0 )
{
for( i = 0; i < 16; i++ )
output[i] = (unsigned char)( input[i] ^ iv[i] );
mbedtls_aes_crypt_ecb( ctx, mode, output, output );
memcpy( iv, output, 16 );
input += 16;
output += 16;
length -= 16;
}
}
return( 0 );
}
#endif /* MBEDTLS_CIPHER_MODE_CBC */
#if defined(MBEDTLS_CIPHER_MODE_XTS)
typedef unsigned char mbedtls_be128[16];
/*
* GF(2^128) multiplication function
*
* This function multiplies a field element by x in the polynomial field
* representation. It uses 64-bit word operations to gain speed but compensates
* for machine endianess and hence works correctly on both big and little
* endian machines.
*/
static void mbedtls_gf128mul_x_ble( unsigned char r[16],
const unsigned char x[16] )
{
uint64_t a, b, ra, rb;
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
a = READ64LE(x + 0);
b = READ64LE(x + 8);
2021-06-15 18:39:36 +00:00
ra = ( a << 1 ) ^ 0x0087 >> ( 8 - ( ( b >> 63 ) << 3 ) );
rb = ( a >> 63 ) | ( b << 1 );
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
WRITE64LE(r + 0, ra );
WRITE64LE(r + 8, rb );
2021-06-15 18:39:36 +00:00
}
/*
* AES-XTS buffer encryption/decryption
*/
int mbedtls_aes_crypt_xts( mbedtls_aes_xts_context *ctx,
int mode,
size_t length,
const unsigned char data_unit[16],
const unsigned char *input,
unsigned char *output )
{
int ret = MBEDTLS_ERR_THIS_CORRUPTION;
2021-06-15 18:39:36 +00:00
size_t blocks = length / 16;
size_t leftover = length % 16;
unsigned char tweak[16];
unsigned char prev_tweak[16];
unsigned char tmp[16];
AES_VALIDATE_RET( ctx != NULL );
AES_VALIDATE_RET( mode == MBEDTLS_AES_ENCRYPT ||
mode == MBEDTLS_AES_DECRYPT );
AES_VALIDATE_RET( data_unit != NULL );
AES_VALIDATE_RET( input != NULL );
AES_VALIDATE_RET( output != NULL );
/* Data units must be at least 16 bytes long. */
if( length < 16 )
return MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH;
/* NIST SP 800-38E disallows data units larger than 2**20 blocks. */
if( length > ( 1 << 20 ) * 16 )
return MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH;
/* Compute the tweak. */
ret = mbedtls_aes_crypt_ecb( &ctx->tweak, MBEDTLS_AES_ENCRYPT,
data_unit, tweak );
if( ret != 0 )
return( ret );
while( blocks-- )
{
size_t i;
if( leftover && ( mode == MBEDTLS_AES_DECRYPT ) && blocks == 0 )
{
/* We are on the last block in a decrypt operation that has
* leftover bytes, so we need to use the next tweak for this block,
* and this tweak for the lefover bytes. Save the current tweak for
* the leftovers and then update the current tweak for use on this,
* the last full block. */
memcpy( prev_tweak, tweak, sizeof( tweak ) );
mbedtls_gf128mul_x_ble( tweak, tweak );
}
for( i = 0; i < 16; i++ )
tmp[i] = input[i] ^ tweak[i];
ret = mbedtls_aes_crypt_ecb( &ctx->crypt, mode, tmp, tmp );
if( ret != 0 )
return( ret );
for( i = 0; i < 16; i++ )
output[i] = tmp[i] ^ tweak[i];
/* Update the tweak for the next block. */
mbedtls_gf128mul_x_ble( tweak, tweak );
output += 16;
input += 16;
}
if( leftover )
{
/* If we are on the leftover bytes in a decrypt operation, we need to
* use the previous tweak for these bytes (as saved in prev_tweak). */
unsigned char *t = mode == MBEDTLS_AES_DECRYPT ? prev_tweak : tweak;
/* We are now on the final part of the data unit, which doesn't divide
* evenly by 16. It's time for ciphertext stealing. */
size_t i;
unsigned char *prev_output = output - 16;
/* Copy ciphertext bytes from the previous block to our output for each
* byte of cyphertext we won't steal. At the same time, copy the
* remainder of the input for this final round (since the loop bounds
* are the same). */
for( i = 0; i < leftover; i++ )
{
output[i] = prev_output[i];
tmp[i] = input[i] ^ t[i];
}
/* Copy ciphertext bytes from the previous block for input in this
* round. */
for( ; i < 16; i++ )
tmp[i] = prev_output[i] ^ t[i];
ret = mbedtls_aes_crypt_ecb( &ctx->crypt, mode, tmp, tmp );
if( ret != 0 )
return ret;
/* Write the result back to the previous block, overriding the previous
* output we copied. */
for( i = 0; i < 16; i++ )
prev_output[i] = tmp[i] ^ t[i];
}
return( 0 );
}
#endif /* MBEDTLS_CIPHER_MODE_XTS */
#if defined(MBEDTLS_CIPHER_MODE_CFB)
/*
* AES-CFB128 buffer encryption/decryption
*/
int mbedtls_aes_crypt_cfb128( mbedtls_aes_context *ctx,
int mode,
size_t length,
size_t *iv_off,
unsigned char iv[16],
const unsigned char *input,
unsigned char *output )
{
int c;
size_t n;
AES_VALIDATE_RET( ctx != NULL );
AES_VALIDATE_RET( mode == MBEDTLS_AES_ENCRYPT ||
mode == MBEDTLS_AES_DECRYPT );
AES_VALIDATE_RET( iv_off != NULL );
AES_VALIDATE_RET( iv != NULL );
AES_VALIDATE_RET( input != NULL );
AES_VALIDATE_RET( output != NULL );
n = *iv_off;
if( n > 15 )
return( MBEDTLS_ERR_AES_BAD_INPUT_DATA );
if( mode == MBEDTLS_AES_DECRYPT )
{
while( length-- )
{
if( n == 0 )
mbedtls_aes_crypt_ecb( ctx, MBEDTLS_AES_ENCRYPT, iv, iv );
c = *input++;
*output++ = (unsigned char)( c ^ iv[n] );
iv[n] = (unsigned char) c;
n = ( n + 1 ) & 0x0F;
}
}
else
{
while( length-- )
{
if( n == 0 )
mbedtls_aes_crypt_ecb( ctx, MBEDTLS_AES_ENCRYPT, iv, iv );
iv[n] = *output++ = (unsigned char)( iv[n] ^ *input++ );
n = ( n + 1 ) & 0x0F;
}
}
*iv_off = n;
return( 0 );
}
/*
* AES-CFB8 buffer encryption/decryption
*/
int mbedtls_aes_crypt_cfb8( mbedtls_aes_context *ctx,
int mode,
size_t length,
unsigned char iv[16],
const unsigned char *input,
unsigned char *output )
{
unsigned char c;
unsigned char ov[17];
AES_VALIDATE_RET( ctx != NULL );
AES_VALIDATE_RET( mode == MBEDTLS_AES_ENCRYPT ||
mode == MBEDTLS_AES_DECRYPT );
AES_VALIDATE_RET( iv != NULL );
AES_VALIDATE_RET( input != NULL );
AES_VALIDATE_RET( output != NULL );
while( length-- )
{
memcpy( ov, iv, 16 );
mbedtls_aes_crypt_ecb( ctx, MBEDTLS_AES_ENCRYPT, iv, iv );
if( mode == MBEDTLS_AES_DECRYPT )
ov[16] = *input;
c = *output++ = (unsigned char)( iv[0] ^ *input++ );
if( mode == MBEDTLS_AES_ENCRYPT )
ov[16] = c;
memcpy( iv, ov + 1, 16 );
}
return( 0 );
}
#endif /* MBEDTLS_CIPHER_MODE_CFB */
#if defined(MBEDTLS_CIPHER_MODE_OFB)
/*
* AES-OFB (Output Feedback Mode) buffer encryption/decryption
*/
int mbedtls_aes_crypt_ofb( mbedtls_aes_context *ctx,
size_t length,
size_t *iv_off,
unsigned char iv[16],
const unsigned char *input,
unsigned char *output )
{
int ret = 0;
size_t n;
AES_VALIDATE_RET( ctx != NULL );
AES_VALIDATE_RET( iv_off != NULL );
AES_VALIDATE_RET( iv != NULL );
AES_VALIDATE_RET( input != NULL );
AES_VALIDATE_RET( output != NULL );
n = *iv_off;
if( n > 15 )
return( MBEDTLS_ERR_AES_BAD_INPUT_DATA );
while( length-- )
{
if( n == 0 )
{
ret = mbedtls_aes_crypt_ecb( ctx, MBEDTLS_AES_ENCRYPT, iv, iv );
if( ret != 0 )
goto exit;
}
*output++ = *input++ ^ iv[n];
n = ( n + 1 ) & 0x0F;
}
*iv_off = n;
exit:
return( ret );
}
#endif /* MBEDTLS_CIPHER_MODE_OFB */
#if defined(MBEDTLS_CIPHER_MODE_CTR)
/*
* AES-CTR buffer encryption/decryption
*/
int mbedtls_aes_crypt_ctr( mbedtls_aes_context *ctx,
size_t length,
size_t *nc_off,
unsigned char nonce_counter[16],
unsigned char stream_block[16],
const unsigned char *input,
unsigned char *output )
2021-06-15 18:39:36 +00:00
{
int c, i;
size_t n;
AES_VALIDATE_RET( ctx != NULL );
AES_VALIDATE_RET( nc_off != NULL );
AES_VALIDATE_RET( nonce_counter != NULL );
AES_VALIDATE_RET( stream_block != NULL );
AES_VALIDATE_RET( input != NULL );
AES_VALIDATE_RET( output != NULL );
n = *nc_off;
if ( n > 0x0F )
return( MBEDTLS_ERR_AES_BAD_INPUT_DATA );
while( length-- )
{
if( n == 0 ) {
mbedtls_aes_crypt_ecb( ctx, MBEDTLS_AES_ENCRYPT, nonce_counter, stream_block );
for( i = 16; i > 0; i-- )
if( ++nonce_counter[i - 1] != 0 )
break;
}
c = *input++;
*output++ = (unsigned char)( c ^ stream_block[n] );
n = ( n + 1 ) & 0x0F;
}
*nc_off = n;
return( 0 );
}
#endif /* MBEDTLS_CIPHER_MODE_CTR */
#endif /* !MBEDTLS_AES_ALT */
#if defined(MBEDTLS_SELF_TEST)
/*
* AES test vectors from:
*
* http://csrc.nist.gov/archive/aes/rijndael/rijndael-vals.zip
*/
static const unsigned char aes_test_ecb_dec[3][16] =
{
{ 0x44, 0x41, 0x6A, 0xC2, 0xD1, 0xF5, 0x3C, 0x58,
0x33, 0x03, 0x91, 0x7E, 0x6B, 0xE9, 0xEB, 0xE0 },
{ 0x48, 0xE3, 0x1E, 0x9E, 0x25, 0x67, 0x18, 0xF2,
0x92, 0x29, 0x31, 0x9C, 0x19, 0xF1, 0x5B, 0xA4 },
{ 0x05, 0x8C, 0xCF, 0xFD, 0xBB, 0xCB, 0x38, 0x2D,
0x1F, 0x6F, 0x56, 0x58, 0x5D, 0x8A, 0x4A, 0xDE }
};
static const unsigned char aes_test_ecb_enc[3][16] =
{
{ 0xC3, 0x4C, 0x05, 0x2C, 0xC0, 0xDA, 0x8D, 0x73,
0x45, 0x1A, 0xFE, 0x5F, 0x03, 0xBE, 0x29, 0x7F },
{ 0xF3, 0xF6, 0x75, 0x2A, 0xE8, 0xD7, 0x83, 0x11,
0x38, 0xF0, 0x41, 0x56, 0x06, 0x31, 0xB1, 0x14 },
{ 0x8B, 0x79, 0xEE, 0xCC, 0x93, 0xA0, 0xEE, 0x5D,
0xFF, 0x30, 0xB4, 0xEA, 0x21, 0x63, 0x6D, 0xA4 }
};
#if defined(MBEDTLS_CIPHER_MODE_CBC)
static const unsigned char aes_test_cbc_dec[3][16] =
{
{ 0xFA, 0xCA, 0x37, 0xE0, 0xB0, 0xC8, 0x53, 0x73,
0xDF, 0x70, 0x6E, 0x73, 0xF7, 0xC9, 0xAF, 0x86 },
{ 0x5D, 0xF6, 0x78, 0xDD, 0x17, 0xBA, 0x4E, 0x75,
0xB6, 0x17, 0x68, 0xC6, 0xAD, 0xEF, 0x7C, 0x7B },
{ 0x48, 0x04, 0xE1, 0x81, 0x8F, 0xE6, 0x29, 0x75,
0x19, 0xA3, 0xE8, 0x8C, 0x57, 0x31, 0x04, 0x13 }
};
static const unsigned char aes_test_cbc_enc[3][16] =
{
{ 0x8A, 0x05, 0xFC, 0x5E, 0x09, 0x5A, 0xF4, 0x84,
0x8A, 0x08, 0xD3, 0x28, 0xD3, 0x68, 0x8E, 0x3D },
{ 0x7B, 0xD9, 0x66, 0xD5, 0x3A, 0xD8, 0xC1, 0xBB,
0x85, 0xD2, 0xAD, 0xFA, 0xE8, 0x7B, 0xB1, 0x04 },
{ 0xFE, 0x3C, 0x53, 0x65, 0x3E, 0x2F, 0x45, 0xB5,
0x6F, 0xCD, 0x88, 0xB2, 0xCC, 0x89, 0x8F, 0xF0 }
};
#endif /* MBEDTLS_CIPHER_MODE_CBC */
#if defined(MBEDTLS_CIPHER_MODE_CFB)
/*
* AES-CFB128 test vectors from:
*
* http://csrc.nist.gov/publications/nistpubs/800-38a/sp800-38a.pdf
*/
static const unsigned char aes_test_cfb128_key[3][32] =
{
{ 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6,
0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C },
{ 0x8E, 0x73, 0xB0, 0xF7, 0xDA, 0x0E, 0x64, 0x52,
0xC8, 0x10, 0xF3, 0x2B, 0x80, 0x90, 0x79, 0xE5,
0x62, 0xF8, 0xEA, 0xD2, 0x52, 0x2C, 0x6B, 0x7B },
{ 0x60, 0x3D, 0xEB, 0x10, 0x15, 0xCA, 0x71, 0xBE,
0x2B, 0x73, 0xAE, 0xF0, 0x85, 0x7D, 0x77, 0x81,
0x1F, 0x35, 0x2C, 0x07, 0x3B, 0x61, 0x08, 0xD7,
0x2D, 0x98, 0x10, 0xA3, 0x09, 0x14, 0xDF, 0xF4 }
};
static const unsigned char aes_test_cfb128_iv[16] =
{
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
};
static const unsigned char aes_test_cfb128_pt[64] =
{
0x6B, 0xC1, 0xBE, 0xE2, 0x2E, 0x40, 0x9F, 0x96,
0xE9, 0x3D, 0x7E, 0x11, 0x73, 0x93, 0x17, 0x2A,
0xAE, 0x2D, 0x8A, 0x57, 0x1E, 0x03, 0xAC, 0x9C,
0x9E, 0xB7, 0x6F, 0xAC, 0x45, 0xAF, 0x8E, 0x51,
0x30, 0xC8, 0x1C, 0x46, 0xA3, 0x5C, 0xE4, 0x11,
0xE5, 0xFB, 0xC1, 0x19, 0x1A, 0x0A, 0x52, 0xEF,
0xF6, 0x9F, 0x24, 0x45, 0xDF, 0x4F, 0x9B, 0x17,
0xAD, 0x2B, 0x41, 0x7B, 0xE6, 0x6C, 0x37, 0x10
};
static const unsigned char aes_test_cfb128_ct[3][64] =
{
{ 0x3B, 0x3F, 0xD9, 0x2E, 0xB7, 0x2D, 0xAD, 0x20,
0x33, 0x34, 0x49, 0xF8, 0xE8, 0x3C, 0xFB, 0x4A,
0xC8, 0xA6, 0x45, 0x37, 0xA0, 0xB3, 0xA9, 0x3F,
0xCD, 0xE3, 0xCD, 0xAD, 0x9F, 0x1C, 0xE5, 0x8B,
0x26, 0x75, 0x1F, 0x67, 0xA3, 0xCB, 0xB1, 0x40,
0xB1, 0x80, 0x8C, 0xF1, 0x87, 0xA4, 0xF4, 0xDF,
0xC0, 0x4B, 0x05, 0x35, 0x7C, 0x5D, 0x1C, 0x0E,
0xEA, 0xC4, 0xC6, 0x6F, 0x9F, 0xF7, 0xF2, 0xE6 },
{ 0xCD, 0xC8, 0x0D, 0x6F, 0xDD, 0xF1, 0x8C, 0xAB,
0x34, 0xC2, 0x59, 0x09, 0xC9, 0x9A, 0x41, 0x74,
0x67, 0xCE, 0x7F, 0x7F, 0x81, 0x17, 0x36, 0x21,
0x96, 0x1A, 0x2B, 0x70, 0x17, 0x1D, 0x3D, 0x7A,
0x2E, 0x1E, 0x8A, 0x1D, 0xD5, 0x9B, 0x88, 0xB1,
0xC8, 0xE6, 0x0F, 0xED, 0x1E, 0xFA, 0xC4, 0xC9,
0xC0, 0x5F, 0x9F, 0x9C, 0xA9, 0x83, 0x4F, 0xA0,
0x42, 0xAE, 0x8F, 0xBA, 0x58, 0x4B, 0x09, 0xFF },
{ 0xDC, 0x7E, 0x84, 0xBF, 0xDA, 0x79, 0x16, 0x4B,
0x7E, 0xCD, 0x84, 0x86, 0x98, 0x5D, 0x38, 0x60,
0x39, 0xFF, 0xED, 0x14, 0x3B, 0x28, 0xB1, 0xC8,
0x32, 0x11, 0x3C, 0x63, 0x31, 0xE5, 0x40, 0x7B,
0xDF, 0x10, 0x13, 0x24, 0x15, 0xE5, 0x4B, 0x92,
0xA1, 0x3E, 0xD0, 0xA8, 0x26, 0x7A, 0xE2, 0xF9,
0x75, 0xA3, 0x85, 0x74, 0x1A, 0xB9, 0xCE, 0xF8,
0x20, 0x31, 0x62, 0x3D, 0x55, 0xB1, 0xE4, 0x71 }
};
#endif /* MBEDTLS_CIPHER_MODE_CFB */
#if defined(MBEDTLS_CIPHER_MODE_OFB)
/*
* AES-OFB test vectors from:
*
* https://csrc.nist.gov/publications/detail/sp/800-38a/final
*/
static const unsigned char aes_test_ofb_key[3][32] =
{
{ 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6,
0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C },
{ 0x8E, 0x73, 0xB0, 0xF7, 0xDA, 0x0E, 0x64, 0x52,
0xC8, 0x10, 0xF3, 0x2B, 0x80, 0x90, 0x79, 0xE5,
0x62, 0xF8, 0xEA, 0xD2, 0x52, 0x2C, 0x6B, 0x7B },
{ 0x60, 0x3D, 0xEB, 0x10, 0x15, 0xCA, 0x71, 0xBE,
0x2B, 0x73, 0xAE, 0xF0, 0x85, 0x7D, 0x77, 0x81,
0x1F, 0x35, 0x2C, 0x07, 0x3B, 0x61, 0x08, 0xD7,
0x2D, 0x98, 0x10, 0xA3, 0x09, 0x14, 0xDF, 0xF4 }
};
static const unsigned char aes_test_ofb_iv[16] =
{
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
};
static const unsigned char aes_test_ofb_pt[64] =
{
0x6B, 0xC1, 0xBE, 0xE2, 0x2E, 0x40, 0x9F, 0x96,
0xE9, 0x3D, 0x7E, 0x11, 0x73, 0x93, 0x17, 0x2A,
0xAE, 0x2D, 0x8A, 0x57, 0x1E, 0x03, 0xAC, 0x9C,
0x9E, 0xB7, 0x6F, 0xAC, 0x45, 0xAF, 0x8E, 0x51,
0x30, 0xC8, 0x1C, 0x46, 0xA3, 0x5C, 0xE4, 0x11,
0xE5, 0xFB, 0xC1, 0x19, 0x1A, 0x0A, 0x52, 0xEF,
0xF6, 0x9F, 0x24, 0x45, 0xDF, 0x4F, 0x9B, 0x17,
0xAD, 0x2B, 0x41, 0x7B, 0xE6, 0x6C, 0x37, 0x10
};
static const unsigned char aes_test_ofb_ct[3][64] =
{
{ 0x3B, 0x3F, 0xD9, 0x2E, 0xB7, 0x2D, 0xAD, 0x20,
0x33, 0x34, 0x49, 0xF8, 0xE8, 0x3C, 0xFB, 0x4A,
0x77, 0x89, 0x50, 0x8d, 0x16, 0x91, 0x8f, 0x03,
0xf5, 0x3c, 0x52, 0xda, 0xc5, 0x4e, 0xd8, 0x25,
0x97, 0x40, 0x05, 0x1e, 0x9c, 0x5f, 0xec, 0xf6,
0x43, 0x44, 0xf7, 0xa8, 0x22, 0x60, 0xed, 0xcc,
0x30, 0x4c, 0x65, 0x28, 0xf6, 0x59, 0xc7, 0x78,
0x66, 0xa5, 0x10, 0xd9, 0xc1, 0xd6, 0xae, 0x5e },
{ 0xCD, 0xC8, 0x0D, 0x6F, 0xDD, 0xF1, 0x8C, 0xAB,
0x34, 0xC2, 0x59, 0x09, 0xC9, 0x9A, 0x41, 0x74,
0xfc, 0xc2, 0x8b, 0x8d, 0x4c, 0x63, 0x83, 0x7c,
0x09, 0xe8, 0x17, 0x00, 0xc1, 0x10, 0x04, 0x01,
0x8d, 0x9a, 0x9a, 0xea, 0xc0, 0xf6, 0x59, 0x6f,
0x55, 0x9c, 0x6d, 0x4d, 0xaf, 0x59, 0xa5, 0xf2,
0x6d, 0x9f, 0x20, 0x08, 0x57, 0xca, 0x6c, 0x3e,
0x9c, 0xac, 0x52, 0x4b, 0xd9, 0xac, 0xc9, 0x2a },
{ 0xDC, 0x7E, 0x84, 0xBF, 0xDA, 0x79, 0x16, 0x4B,
0x7E, 0xCD, 0x84, 0x86, 0x98, 0x5D, 0x38, 0x60,
0x4f, 0xeb, 0xdc, 0x67, 0x40, 0xd2, 0x0b, 0x3a,
0xc8, 0x8f, 0x6a, 0xd8, 0x2a, 0x4f, 0xb0, 0x8d,
0x71, 0xab, 0x47, 0xa0, 0x86, 0xe8, 0x6e, 0xed,
0xf3, 0x9d, 0x1c, 0x5b, 0xba, 0x97, 0xc4, 0x08,
0x01, 0x26, 0x14, 0x1d, 0x67, 0xf3, 0x7b, 0xe8,
0x53, 0x8f, 0x5a, 0x8b, 0xe7, 0x40, 0xe4, 0x84 }
};
#endif /* MBEDTLS_CIPHER_MODE_OFB */
#if defined(MBEDTLS_CIPHER_MODE_CTR)
/*
* AES-CTR test vectors from:
*
* http://www.faqs.org/rfcs/rfc3686.html
*/
static const unsigned char aes_test_ctr_key[3][16] =
{
{ 0xAE, 0x68, 0x52, 0xF8, 0x12, 0x10, 0x67, 0xCC,
0x4B, 0xF7, 0xA5, 0x76, 0x55, 0x77, 0xF3, 0x9E },
{ 0x7E, 0x24, 0x06, 0x78, 0x17, 0xFA, 0xE0, 0xD7,
0x43, 0xD6, 0xCE, 0x1F, 0x32, 0x53, 0x91, 0x63 },
{ 0x76, 0x91, 0xBE, 0x03, 0x5E, 0x50, 0x20, 0xA8,
0xAC, 0x6E, 0x61, 0x85, 0x29, 0xF9, 0xA0, 0xDC }
};
static const unsigned char aes_test_ctr_nonce_counter[3][16] =
{
{ 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01 },
{ 0x00, 0x6C, 0xB6, 0xDB, 0xC0, 0x54, 0x3B, 0x59,
0xDA, 0x48, 0xD9, 0x0B, 0x00, 0x00, 0x00, 0x01 },
{ 0x00, 0xE0, 0x01, 0x7B, 0x27, 0x77, 0x7F, 0x3F,
0x4A, 0x17, 0x86, 0xF0, 0x00, 0x00, 0x00, 0x01 }
};
static const unsigned char aes_test_ctr_pt[3][48] =
{
{ 0x53, 0x69, 0x6E, 0x67, 0x6C, 0x65, 0x20, 0x62,
0x6C, 0x6F, 0x63, 0x6B, 0x20, 0x6D, 0x73, 0x67 },
{ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F },
{ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F,
0x20, 0x21, 0x22, 0x23 }
};
static const unsigned char aes_test_ctr_ct[3][48] =
{
{ 0xE4, 0x09, 0x5D, 0x4F, 0xB7, 0xA7, 0xB3, 0x79,
0x2D, 0x61, 0x75, 0xA3, 0x26, 0x13, 0x11, 0xB8 },
{ 0x51, 0x04, 0xA1, 0x06, 0x16, 0x8A, 0x72, 0xD9,
0x79, 0x0D, 0x41, 0xEE, 0x8E, 0xDA, 0xD3, 0x88,
0xEB, 0x2E, 0x1E, 0xFC, 0x46, 0xDA, 0x57, 0xC8,
0xFC, 0xE6, 0x30, 0xDF, 0x91, 0x41, 0xBE, 0x28 },
{ 0xC1, 0xCF, 0x48, 0xA8, 0x9F, 0x2F, 0xFD, 0xD9,
0xCF, 0x46, 0x52, 0xE9, 0xEF, 0xDB, 0x72, 0xD7,
0x45, 0x40, 0xA4, 0x2B, 0xDE, 0x6D, 0x78, 0x36,
0xD5, 0x9A, 0x5C, 0xEA, 0xAE, 0xF3, 0x10, 0x53,
0x25, 0xB2, 0x07, 0x2F }
};
static const int aes_test_ctr_len[3] =
{ 16, 32, 36 };
#endif /* MBEDTLS_CIPHER_MODE_CTR */
#if defined(MBEDTLS_CIPHER_MODE_XTS)
/*
* AES-XTS test vectors from:
*
* IEEE P1619/D16 Annex B
* https://web.archive.org/web/20150629024421/http://grouper.ieee.org/groups/1619/email/pdf00086.pdf
* (Archived from original at http://grouper.ieee.org/groups/1619/email/pdf00086.pdf)
*/
static const unsigned char aes_test_xts_key[][32] =
{
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
{ 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11,
0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11,
0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22,
0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22 },
{ 0xff, 0xfe, 0xfd, 0xfc, 0xfb, 0xfa, 0xf9, 0xf8,
0xf7, 0xf6, 0xf5, 0xf4, 0xf3, 0xf2, 0xf1, 0xf0,
0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22,
0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22 },
};
static const unsigned char aes_test_xts_pt32[][32] =
{
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
{ 0x44, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44,
0x44, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44,
0x44, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44,
0x44, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44 },
{ 0x44, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44,
0x44, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44,
0x44, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44,
0x44, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44 },
};
static const unsigned char aes_test_xts_ct32[][32] =
{
{ 0x91, 0x7c, 0xf6, 0x9e, 0xbd, 0x68, 0xb2, 0xec,
0x9b, 0x9f, 0xe9, 0xa3, 0xea, 0xdd, 0xa6, 0x92,
0xcd, 0x43, 0xd2, 0xf5, 0x95, 0x98, 0xed, 0x85,
0x8c, 0x02, 0xc2, 0x65, 0x2f, 0xbf, 0x92, 0x2e },
{ 0xc4, 0x54, 0x18, 0x5e, 0x6a, 0x16, 0x93, 0x6e,
0x39, 0x33, 0x40, 0x38, 0xac, 0xef, 0x83, 0x8b,
0xfb, 0x18, 0x6f, 0xff, 0x74, 0x80, 0xad, 0xc4,
0x28, 0x93, 0x82, 0xec, 0xd6, 0xd3, 0x94, 0xf0 },
{ 0xaf, 0x85, 0x33, 0x6b, 0x59, 0x7a, 0xfc, 0x1a,
0x90, 0x0b, 0x2e, 0xb2, 0x1e, 0xc9, 0x49, 0xd2,
0x92, 0xdf, 0x4c, 0x04, 0x7e, 0x0b, 0x21, 0x53,
0x21, 0x86, 0xa5, 0x97, 0x1a, 0x22, 0x7a, 0x89 },
};
static const unsigned char aes_test_xts_data_unit[][16] =
{
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
{ 0x33, 0x33, 0x33, 0x33, 0x33, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
{ 0x33, 0x33, 0x33, 0x33, 0x33, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
};
#endif /* MBEDTLS_CIPHER_MODE_XTS */
/*
* Checkup routine
*/
int mbedtls_aes_self_test( int verbose )
{
int ret = 0, i, j, u, mode;
unsigned int keybits;
unsigned char key[32];
unsigned char buf[64];
const unsigned char *aes_tests;
#if defined(MBEDTLS_CIPHER_MODE_CBC) || defined(MBEDTLS_CIPHER_MODE_CFB)
unsigned char iv[16];
#endif
#if defined(MBEDTLS_CIPHER_MODE_CBC)
unsigned char prv[16];
#endif
#if defined(MBEDTLS_CIPHER_MODE_CTR) || defined(MBEDTLS_CIPHER_MODE_CFB) || \
defined(MBEDTLS_CIPHER_MODE_OFB)
size_t offset;
#endif
#if defined(MBEDTLS_CIPHER_MODE_CTR) || defined(MBEDTLS_CIPHER_MODE_XTS)
int len;
#endif
#if defined(MBEDTLS_CIPHER_MODE_CTR)
unsigned char nonce_counter[16];
unsigned char stream_block[16];
#endif
mbedtls_aes_context ctx;
mbedtls_platform_zeroize( key, 32 );
2021-06-15 18:39:36 +00:00
mbedtls_aes_init( &ctx );
/*
* ECB mode
*/
for( i = 0; i < 6; i++ )
{
u = i >> 1;
keybits = 128 + u * 64;
mode = i & 1;
if( verbose != 0 )
mbedtls_printf( " AES-ECB-%3u (%s): ", keybits,
( mode == MBEDTLS_AES_DECRYPT ) ? "dec" : "enc" );
mbedtls_platform_zeroize( buf, 16 );
2021-06-15 18:39:36 +00:00
if( mode == MBEDTLS_AES_DECRYPT )
{
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
mbedtls_aes_setkey_dec( &ctx, key, keybits );
2021-06-15 18:39:36 +00:00
aes_tests = aes_test_ecb_dec[u];
}
else
{
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
mbedtls_aes_setkey_enc( &ctx, key, keybits );
2021-06-15 18:39:36 +00:00
aes_tests = aes_test_ecb_enc[u];
}
for( j = 0; j < 10000; j++ )
{
ret = mbedtls_aes_crypt_ecb( &ctx, mode, buf, buf );
if( ret != 0 )
goto exit;
}
Make numerous improvements - Python static hello world now 1.8mb - Python static fully loaded now 10mb - Python HTTPS client now uses MbedTLS - Python REPL now completes import stmts - Increase stack size for Python for now - Begin synthesizing posixpath and ntpath - Restore Python \N{UNICODE NAME} support - Restore Python NFKD symbol normalization - Add optimized code path for Intel SHA-NI - Get more Python unit tests passing faster - Get Python help() pagination working on NT - Python hashlib now supports MbedTLS PBKDF2 - Make memcpy/memmove/memcmp/bcmp/etc. faster - Add Mersenne Twister and Vigna to LIBC_RAND - Provide privileged __printf() for error code - Fix zipos opendir() so that it reports ENOTDIR - Add basic chmod() implementation for Windows NT - Add Cosmo's best functions to Python cosmo module - Pin function trace indent depth to that of caller - Show memory diagram on invalid access in MODE=dbg - Differentiate stack overflow on crash in MODE=dbg - Add stb_truetype and tools for analyzing font files - Upgrade to UNICODE 13 and reduce its binary footprint - COMPILE.COM now logs resource usage of build commands - Start implementing basic poll() support on bare metal - Set getauxval(AT_EXECFN) to GetModuleFileName() on NT - Add descriptions to strerror() in non-TINY build modes - Add COUNTBRANCH() macro to help with micro-optimizations - Make error / backtrace / asan / memory code more unbreakable - Add fast perfect C implementation of μ-Law and a-Law audio codecs - Make strtol() functions consistent with other libc implementations - Improve Linenoise implementation (see also github.com/jart/bestline) - COMPILE.COM now suppresses stdout/stderr of successful build commands
2021-09-28 05:58:51 +00:00
if( timingsafe_bcmp( buf, aes_tests, 16 ) != 0 )
2021-06-15 18:39:36 +00:00
{
ret = 1;
goto exit;
}
if( verbose != 0 )
mbedtls_printf( "passed\n" );
}
if( verbose != 0 )
mbedtls_printf( "\n" );
#if defined(MBEDTLS_CIPHER_MODE_CBC)
/*
* CBC mode
*/
for( i = 0; i < 6; i++ )
{
u = i >> 1;
keybits = 128 + u * 64;
mode = i & 1;
if( verbose != 0 )
mbedtls_printf( " AES-CBC-%3u (%s): ", keybits,
( mode == MBEDTLS_AES_DECRYPT ) ? "dec" : "enc" );
mbedtls_platform_zeroize( iv , 16 );
mbedtls_platform_zeroize( prv, 16 );
mbedtls_platform_zeroize( buf, 16 );
2021-06-15 18:39:36 +00:00
if( mode == MBEDTLS_AES_DECRYPT )
{
ret = mbedtls_aes_setkey_dec( &ctx, key, keybits );
aes_tests = aes_test_cbc_dec[u];
}
else
{
ret = mbedtls_aes_setkey_enc( &ctx, key, keybits );
aes_tests = aes_test_cbc_enc[u];
}
/*
* AES-192 is an optional feature that may be unavailable when
* there is an alternative underlying implementation i.e. when
* MBEDTLS_AES_ALT is defined.
*/
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
if( ret != 0 )
2021-06-15 18:39:36 +00:00
{
goto exit;
}
for( j = 0; j < 10000; j++ )
{
if( mode == MBEDTLS_AES_ENCRYPT )
{
unsigned char tmp[16];
memcpy( tmp, prv, 16 );
memcpy( prv, buf, 16 );
memcpy( buf, tmp, 16 );
}
ret = mbedtls_aes_crypt_cbc( &ctx, mode, 16, iv, buf, buf );
if( ret != 0 )
goto exit;
}
Make numerous improvements - Python static hello world now 1.8mb - Python static fully loaded now 10mb - Python HTTPS client now uses MbedTLS - Python REPL now completes import stmts - Increase stack size for Python for now - Begin synthesizing posixpath and ntpath - Restore Python \N{UNICODE NAME} support - Restore Python NFKD symbol normalization - Add optimized code path for Intel SHA-NI - Get more Python unit tests passing faster - Get Python help() pagination working on NT - Python hashlib now supports MbedTLS PBKDF2 - Make memcpy/memmove/memcmp/bcmp/etc. faster - Add Mersenne Twister and Vigna to LIBC_RAND - Provide privileged __printf() for error code - Fix zipos opendir() so that it reports ENOTDIR - Add basic chmod() implementation for Windows NT - Add Cosmo's best functions to Python cosmo module - Pin function trace indent depth to that of caller - Show memory diagram on invalid access in MODE=dbg - Differentiate stack overflow on crash in MODE=dbg - Add stb_truetype and tools for analyzing font files - Upgrade to UNICODE 13 and reduce its binary footprint - COMPILE.COM now logs resource usage of build commands - Start implementing basic poll() support on bare metal - Set getauxval(AT_EXECFN) to GetModuleFileName() on NT - Add descriptions to strerror() in non-TINY build modes - Add COUNTBRANCH() macro to help with micro-optimizations - Make error / backtrace / asan / memory code more unbreakable - Add fast perfect C implementation of μ-Law and a-Law audio codecs - Make strtol() functions consistent with other libc implementations - Improve Linenoise implementation (see also github.com/jart/bestline) - COMPILE.COM now suppresses stdout/stderr of successful build commands
2021-09-28 05:58:51 +00:00
if( timingsafe_bcmp( buf, aes_tests, 16 ) != 0 )
2021-06-15 18:39:36 +00:00
{
ret = 1;
goto exit;
}
if( verbose != 0 )
mbedtls_printf( "passed\n" );
}
if( verbose != 0 )
mbedtls_printf( "\n" );
#endif /* MBEDTLS_CIPHER_MODE_CBC */
#if defined(MBEDTLS_CIPHER_MODE_CFB)
/*
* CFB128 mode
*/
for( i = 0; i < 6; i++ )
{
u = i >> 1;
keybits = 128 + u * 64;
mode = i & 1;
if( verbose != 0 )
mbedtls_printf( " AES-CFB128-%3u (%s): ", keybits,
( mode == MBEDTLS_AES_DECRYPT ) ? "dec" : "enc" );
memcpy( iv, aes_test_cfb128_iv, 16 );
memcpy( key, aes_test_cfb128_key[u], keybits / 8 );
offset = 0;
ret = mbedtls_aes_setkey_enc( &ctx, key, keybits );
/*
* AES-192 is an optional feature that may be unavailable when
* there is an alternative underlying implementation i.e. when
* MBEDTLS_AES_ALT is defined.
*/
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
if( ret != 0 )
2021-06-15 18:39:36 +00:00
{
goto exit;
}
if( mode == MBEDTLS_AES_DECRYPT )
{
memcpy( buf, aes_test_cfb128_ct[u], 64 );
aes_tests = aes_test_cfb128_pt;
}
else
{
memcpy( buf, aes_test_cfb128_pt, 64 );
aes_tests = aes_test_cfb128_ct[u];
}
ret = mbedtls_aes_crypt_cfb128( &ctx, mode, 64, &offset, iv, buf, buf );
if( ret != 0 )
goto exit;
Make numerous improvements - Python static hello world now 1.8mb - Python static fully loaded now 10mb - Python HTTPS client now uses MbedTLS - Python REPL now completes import stmts - Increase stack size for Python for now - Begin synthesizing posixpath and ntpath - Restore Python \N{UNICODE NAME} support - Restore Python NFKD symbol normalization - Add optimized code path for Intel SHA-NI - Get more Python unit tests passing faster - Get Python help() pagination working on NT - Python hashlib now supports MbedTLS PBKDF2 - Make memcpy/memmove/memcmp/bcmp/etc. faster - Add Mersenne Twister and Vigna to LIBC_RAND - Provide privileged __printf() for error code - Fix zipos opendir() so that it reports ENOTDIR - Add basic chmod() implementation for Windows NT - Add Cosmo's best functions to Python cosmo module - Pin function trace indent depth to that of caller - Show memory diagram on invalid access in MODE=dbg - Differentiate stack overflow on crash in MODE=dbg - Add stb_truetype and tools for analyzing font files - Upgrade to UNICODE 13 and reduce its binary footprint - COMPILE.COM now logs resource usage of build commands - Start implementing basic poll() support on bare metal - Set getauxval(AT_EXECFN) to GetModuleFileName() on NT - Add descriptions to strerror() in non-TINY build modes - Add COUNTBRANCH() macro to help with micro-optimizations - Make error / backtrace / asan / memory code more unbreakable - Add fast perfect C implementation of μ-Law and a-Law audio codecs - Make strtol() functions consistent with other libc implementations - Improve Linenoise implementation (see also github.com/jart/bestline) - COMPILE.COM now suppresses stdout/stderr of successful build commands
2021-09-28 05:58:51 +00:00
if( timingsafe_bcmp( buf, aes_tests, 64 ) != 0 )
2021-06-15 18:39:36 +00:00
{
ret = 1;
goto exit;
}
if( verbose != 0 )
mbedtls_printf( "passed\n" );
}
if( verbose != 0 )
mbedtls_printf( "\n" );
#endif /* MBEDTLS_CIPHER_MODE_CFB */
#if defined(MBEDTLS_CIPHER_MODE_OFB)
/*
* OFB mode
*/
for( i = 0; i < 6; i++ )
{
u = i >> 1;
keybits = 128 + u * 64;
mode = i & 1;
if( verbose != 0 )
mbedtls_printf( " AES-OFB-%3u (%s): ", keybits,
( mode == MBEDTLS_AES_DECRYPT ) ? "dec" : "enc" );
memcpy( iv, aes_test_ofb_iv, 16 );
memcpy( key, aes_test_ofb_key[u], keybits / 8 );
offset = 0;
ret = mbedtls_aes_setkey_enc( &ctx, key, keybits );
/*
* AES-192 is an optional feature that may be unavailable when
* there is an alternative underlying implementation i.e. when
* MBEDTLS_AES_ALT is defined.
*/
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
if( ret != 0 )
2021-06-15 18:39:36 +00:00
{
goto exit;
}
if( mode == MBEDTLS_AES_DECRYPT )
{
memcpy( buf, aes_test_ofb_ct[u], 64 );
aes_tests = aes_test_ofb_pt;
}
else
{
memcpy( buf, aes_test_ofb_pt, 64 );
aes_tests = aes_test_ofb_ct[u];
}
ret = mbedtls_aes_crypt_ofb( &ctx, 64, &offset, iv, buf, buf );
if( ret != 0 )
goto exit;
Make numerous improvements - Python static hello world now 1.8mb - Python static fully loaded now 10mb - Python HTTPS client now uses MbedTLS - Python REPL now completes import stmts - Increase stack size for Python for now - Begin synthesizing posixpath and ntpath - Restore Python \N{UNICODE NAME} support - Restore Python NFKD symbol normalization - Add optimized code path for Intel SHA-NI - Get more Python unit tests passing faster - Get Python help() pagination working on NT - Python hashlib now supports MbedTLS PBKDF2 - Make memcpy/memmove/memcmp/bcmp/etc. faster - Add Mersenne Twister and Vigna to LIBC_RAND - Provide privileged __printf() for error code - Fix zipos opendir() so that it reports ENOTDIR - Add basic chmod() implementation for Windows NT - Add Cosmo's best functions to Python cosmo module - Pin function trace indent depth to that of caller - Show memory diagram on invalid access in MODE=dbg - Differentiate stack overflow on crash in MODE=dbg - Add stb_truetype and tools for analyzing font files - Upgrade to UNICODE 13 and reduce its binary footprint - COMPILE.COM now logs resource usage of build commands - Start implementing basic poll() support on bare metal - Set getauxval(AT_EXECFN) to GetModuleFileName() on NT - Add descriptions to strerror() in non-TINY build modes - Add COUNTBRANCH() macro to help with micro-optimizations - Make error / backtrace / asan / memory code more unbreakable - Add fast perfect C implementation of μ-Law and a-Law audio codecs - Make strtol() functions consistent with other libc implementations - Improve Linenoise implementation (see also github.com/jart/bestline) - COMPILE.COM now suppresses stdout/stderr of successful build commands
2021-09-28 05:58:51 +00:00
if( timingsafe_bcmp( buf, aes_tests, 64 ) != 0 )
2021-06-15 18:39:36 +00:00
{
ret = 1;
goto exit;
}
if( verbose != 0 )
mbedtls_printf( "passed\n" );
}
if( verbose != 0 )
mbedtls_printf( "\n" );
#endif /* MBEDTLS_CIPHER_MODE_OFB */
#if defined(MBEDTLS_CIPHER_MODE_CTR)
/*
* CTR mode
*/
for( i = 0; i < 6; i++ )
{
u = i >> 1;
mode = i & 1;
if( verbose != 0 )
mbedtls_printf( " AES-CTR-128 (%s): ",
( mode == MBEDTLS_AES_DECRYPT ) ? "dec" : "enc" );
memcpy( nonce_counter, aes_test_ctr_nonce_counter[u], 16 );
memcpy( key, aes_test_ctr_key[u], 16 );
offset = 0;
if( ( ret = mbedtls_aes_setkey_enc( &ctx, key, 128 ) ) != 0 )
goto exit;
len = aes_test_ctr_len[u];
if( mode == MBEDTLS_AES_DECRYPT )
{
memcpy( buf, aes_test_ctr_ct[u], len );
aes_tests = aes_test_ctr_pt[u];
}
else
{
memcpy( buf, aes_test_ctr_pt[u], len );
aes_tests = aes_test_ctr_ct[u];
}
ret = mbedtls_aes_crypt_ctr( &ctx, len, &offset, nonce_counter,
stream_block, buf, buf );
if( ret != 0 )
goto exit;
Make numerous improvements - Python static hello world now 1.8mb - Python static fully loaded now 10mb - Python HTTPS client now uses MbedTLS - Python REPL now completes import stmts - Increase stack size for Python for now - Begin synthesizing posixpath and ntpath - Restore Python \N{UNICODE NAME} support - Restore Python NFKD symbol normalization - Add optimized code path for Intel SHA-NI - Get more Python unit tests passing faster - Get Python help() pagination working on NT - Python hashlib now supports MbedTLS PBKDF2 - Make memcpy/memmove/memcmp/bcmp/etc. faster - Add Mersenne Twister and Vigna to LIBC_RAND - Provide privileged __printf() for error code - Fix zipos opendir() so that it reports ENOTDIR - Add basic chmod() implementation for Windows NT - Add Cosmo's best functions to Python cosmo module - Pin function trace indent depth to that of caller - Show memory diagram on invalid access in MODE=dbg - Differentiate stack overflow on crash in MODE=dbg - Add stb_truetype and tools for analyzing font files - Upgrade to UNICODE 13 and reduce its binary footprint - COMPILE.COM now logs resource usage of build commands - Start implementing basic poll() support on bare metal - Set getauxval(AT_EXECFN) to GetModuleFileName() on NT - Add descriptions to strerror() in non-TINY build modes - Add COUNTBRANCH() macro to help with micro-optimizations - Make error / backtrace / asan / memory code more unbreakable - Add fast perfect C implementation of μ-Law and a-Law audio codecs - Make strtol() functions consistent with other libc implementations - Improve Linenoise implementation (see also github.com/jart/bestline) - COMPILE.COM now suppresses stdout/stderr of successful build commands
2021-09-28 05:58:51 +00:00
if( timingsafe_bcmp( buf, aes_tests, len ) != 0 )
2021-06-15 18:39:36 +00:00
{
ret = 1;
goto exit;
}
if( verbose != 0 )
mbedtls_printf( "passed\n" );
}
if( verbose != 0 )
mbedtls_printf( "\n" );
#endif /* MBEDTLS_CIPHER_MODE_CTR */
#if defined(MBEDTLS_CIPHER_MODE_XTS)
{
static const int num_tests =
sizeof(aes_test_xts_key) / sizeof(*aes_test_xts_key);
mbedtls_aes_xts_context ctx_xts;
/*
* XTS mode
*/
mbedtls_aes_xts_init( &ctx_xts );
for( i = 0; i < num_tests << 1; i++ )
{
const unsigned char *data_unit;
u = i >> 1;
mode = i & 1;
if( verbose != 0 )
mbedtls_printf( " AES-XTS-128 (%s): ",
( mode == MBEDTLS_AES_DECRYPT ) ? "dec" : "enc" );
mbedtls_platform_zeroize( key, sizeof( key ) );
2021-06-15 18:39:36 +00:00
memcpy( key, aes_test_xts_key[u], 32 );
data_unit = aes_test_xts_data_unit[u];
len = sizeof( *aes_test_xts_ct32 );
if( mode == MBEDTLS_AES_DECRYPT )
{
ret = mbedtls_aes_xts_setkey_dec( &ctx_xts, key, 256 );
if( ret != 0)
goto exit;
memcpy( buf, aes_test_xts_ct32[u], len );
aes_tests = aes_test_xts_pt32[u];
}
else
{
ret = mbedtls_aes_xts_setkey_enc( &ctx_xts, key, 256 );
if( ret != 0)
goto exit;
memcpy( buf, aes_test_xts_pt32[u], len );
aes_tests = aes_test_xts_ct32[u];
}
ret = mbedtls_aes_crypt_xts( &ctx_xts, mode, len, data_unit,
buf, buf );
if( ret != 0 )
goto exit;
Make numerous improvements - Python static hello world now 1.8mb - Python static fully loaded now 10mb - Python HTTPS client now uses MbedTLS - Python REPL now completes import stmts - Increase stack size for Python for now - Begin synthesizing posixpath and ntpath - Restore Python \N{UNICODE NAME} support - Restore Python NFKD symbol normalization - Add optimized code path for Intel SHA-NI - Get more Python unit tests passing faster - Get Python help() pagination working on NT - Python hashlib now supports MbedTLS PBKDF2 - Make memcpy/memmove/memcmp/bcmp/etc. faster - Add Mersenne Twister and Vigna to LIBC_RAND - Provide privileged __printf() for error code - Fix zipos opendir() so that it reports ENOTDIR - Add basic chmod() implementation for Windows NT - Add Cosmo's best functions to Python cosmo module - Pin function trace indent depth to that of caller - Show memory diagram on invalid access in MODE=dbg - Differentiate stack overflow on crash in MODE=dbg - Add stb_truetype and tools for analyzing font files - Upgrade to UNICODE 13 and reduce its binary footprint - COMPILE.COM now logs resource usage of build commands - Start implementing basic poll() support on bare metal - Set getauxval(AT_EXECFN) to GetModuleFileName() on NT - Add descriptions to strerror() in non-TINY build modes - Add COUNTBRANCH() macro to help with micro-optimizations - Make error / backtrace / asan / memory code more unbreakable - Add fast perfect C implementation of μ-Law and a-Law audio codecs - Make strtol() functions consistent with other libc implementations - Improve Linenoise implementation (see also github.com/jart/bestline) - COMPILE.COM now suppresses stdout/stderr of successful build commands
2021-09-28 05:58:51 +00:00
if( timingsafe_bcmp( buf, aes_tests, len ) != 0 )
2021-06-15 18:39:36 +00:00
{
ret = 1;
goto exit;
}
if( verbose != 0 )
mbedtls_printf( "passed\n" );
}
if( verbose != 0 )
mbedtls_printf( "\n" );
mbedtls_aes_xts_free( &ctx_xts );
}
#endif /* MBEDTLS_CIPHER_MODE_XTS */
ret = 0;
exit:
if( ret != 0 && verbose != 0 )
mbedtls_printf( "failed\n" );
mbedtls_aes_free( &ctx );
return( ret );
}
#endif /* MBEDTLS_SELF_TEST */
#endif /* MBEDTLS_AES_C */