cosmopolitan/libc/calls/getrandom.c

211 lines
7.5 KiB
C
Raw Normal View History

2020-06-15 14:18:57 +00:00
/*-*- mode:c;indent-tabs-mode:nil;c-basic-offset:2;tab-width:8;coding:utf-8 -*-│
vi: set et ft=c ts=2 sts=2 sw=2 fenc=utf-8 :vi
2020-06-15 14:18:57 +00:00
Copyright 2020 Justine Alexandra Roberts Tunney
2020-12-28 01:18:44 +00:00
Permission to use, copy, modify, and/or distribute this software for
any purpose with or without fee is hereby granted, provided that the
above copyright notice and this permission notice appear in all copies.
2020-06-15 14:18:57 +00:00
2020-12-28 01:18:44 +00:00
THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THIS SOFTWARE.
2020-06-15 14:18:57 +00:00
*/
#include "libc/assert.h"
#include "libc/calls/blockcancel.internal.h"
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
#include "libc/calls/calls.h"
#include "libc/calls/cp.internal.h"
#include "libc/calls/internal.h"
#include "libc/calls/struct/sigaction.h"
#include "libc/calls/struct/sigset.h"
Make improvements - We now serialize the file descriptor table when spawning / executing processes on Windows. This means you can now inherit more stuff than just standard i/o. It's needed by bash, which duplicates the console to file descriptor #255. We also now do a better job serializing the environment variables, so you're less likely to encounter E2BIG when using your bash shell. We also no longer coerce environ to uppercase - execve() on Windows now remotely controls its parent process to make them spawn a replacement for itself. Then it'll be able to terminate immediately once the spawn succeeds, without having to linger around for the lifetime as a shell process for proxying the exit code. When process worker thread running in the parent sees the child die, it's given a handle to the new child, to replace it in the process table. - execve() and posix_spawn() on Windows will now provide CreateProcess an explicit handle list. This allows us to remove handle locks which enables better fork/spawn concurrency, with seriously correct thread safety. Other codebases like Go use the same technique. On the other hand fork() still favors the conventional WIN32 inheritence approach which can be a little bit messy, but is *controlled* by guaranteeing perfectly clean slates at both the spawning and execution boundaries - sigset_t is now 64 bits. Having it be 128 bits was a mistake because there's no reason to use that and it's only supported by FreeBSD. By using the system word size, signal mask manipulation on Windows goes very fast. Furthermore @asyncsignalsafe funcs have been rewritten on Windows to take advantage of signal masking, now that it's much more pleasant to use. - All the overlapped i/o code on Windows has been rewritten for pretty good signal and cancelation safety. We're now able to ensure overlap data structures are cleaned up so long as you don't longjmp() out of out of a signal handler that interrupted an i/o operation. Latencies are also improved thanks to the removal of lots of "busy wait" code. Waits should be optimal for everything except poll(), which shall be the last and final demon we slay in the win32 i/o horror show. - getrusage() on Windows is now able to report RUSAGE_CHILDREN as well as RUSAGE_SELF, thanks to aggregation in the process manager thread.
2023-10-08 12:36:18 +00:00
#include "libc/calls/struct/sigset.internal.h"
2022-05-23 22:06:11 +00:00
#include "libc/calls/syscall-sysv.internal.h"
#include "libc/calls/syscall_support-nt.internal.h"
#include "libc/calls/syscall_support-sysv.internal.h"
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
#include "libc/dce.h"
2020-06-15 14:18:57 +00:00
#include "libc/errno.h"
#include "libc/intrin/asan.internal.h"
#include "libc/intrin/asmflag.h"
#include "libc/intrin/strace.internal.h"
#include "libc/intrin/weaken.h"
#include "libc/macros.internal.h"
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
#include "libc/nexgen32e/kcpuids.h"
#include "libc/nexgen32e/rdtsc.h"
#include "libc/nexgen32e/vendor.internal.h"
#include "libc/nexgen32e/x86feature.h"
#include "libc/nexgen32e/x86info.h"
#include "libc/nt/runtime.h"
2020-06-15 14:18:57 +00:00
#include "libc/runtime/runtime.h"
#include "libc/stdio/rand.h"
2020-06-15 14:18:57 +00:00
#include "libc/str/str.h"
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
#include "libc/sysv/consts/at.h"
#include "libc/sysv/consts/auxv.h"
#include "libc/sysv/consts/grnd.h"
#include "libc/sysv/consts/o.h"
#include "libc/sysv/consts/sig.h"
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
#include "libc/sysv/errfuns.h"
2022-11-05 01:19:05 +00:00
#include "libc/thread/thread.h"
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
__static_yoink("rdrand_init");
int sys_getentropy(void *, size_t) asm("sys_getrandom");
ssize_t sys_getrandom_metal(char *, size_t, int);
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
static bool have_getrandom;
2020-06-15 14:18:57 +00:00
static void GetRandomEntropy(char *p, size_t n) {
unassert(n <= 256);
if (sys_getentropy(p, n))
notpossible;
}
static void GetRandomArnd(char *p, size_t n) {
size_t m;
int cmd[2];
cmd[0] = 1; // CTL_KERN
cmd[1] = IsFreebsd() ? 37 : 81; // KERN_ARND
unassert((m = n) <= 256);
2024-05-03 06:21:43 +00:00
if (sysctl(cmd, 2, p, &n, 0, 0) == -1)
notpossible;
if (m != n)
notpossible;
}
static ssize_t GetRandomBsd(char *p, size_t n, void impl(char *, size_t)) {
size_t m, i;
for (i = 0;;) {
m = MIN(n - i, 256);
impl(p + i, m);
if ((i += m) == n) {
return n;
}
}
}
static ssize_t GetDevUrandom(char *p, size_t n) {
2022-11-05 01:19:05 +00:00
int fd;
ssize_t rc;
2023-10-09 00:56:59 +00:00
BLOCK_SIGNALS;
BLOCK_CANCELATION;
fd = sys_openat(AT_FDCWD, "/dev/urandom", O_RDONLY | O_CLOEXEC, 0);
2023-10-09 00:56:59 +00:00
if (fd != -1) {
rc = sys_read(fd, p, n);
} else {
rc = -1;
}
ALLOW_CANCELATION;
2023-10-09 00:56:59 +00:00
ALLOW_SIGNALS;
2022-11-05 01:19:05 +00:00
return rc;
}
ssize_t __getrandom(void *p, size_t n, unsigned f) {
ssize_t rc;
if (IsWindows()) {
rc = ProcessPrng(p, n) ? n : __winerr();
} else if (have_getrandom) {
if (IsXnu() || IsOpenbsd()) {
rc = GetRandomBsd(p, n, GetRandomEntropy);
2022-11-05 01:19:05 +00:00
} else {
Make improvements - We now serialize the file descriptor table when spawning / executing processes on Windows. This means you can now inherit more stuff than just standard i/o. It's needed by bash, which duplicates the console to file descriptor #255. We also now do a better job serializing the environment variables, so you're less likely to encounter E2BIG when using your bash shell. We also no longer coerce environ to uppercase - execve() on Windows now remotely controls its parent process to make them spawn a replacement for itself. Then it'll be able to terminate immediately once the spawn succeeds, without having to linger around for the lifetime as a shell process for proxying the exit code. When process worker thread running in the parent sees the child die, it's given a handle to the new child, to replace it in the process table. - execve() and posix_spawn() on Windows will now provide CreateProcess an explicit handle list. This allows us to remove handle locks which enables better fork/spawn concurrency, with seriously correct thread safety. Other codebases like Go use the same technique. On the other hand fork() still favors the conventional WIN32 inheritence approach which can be a little bit messy, but is *controlled* by guaranteeing perfectly clean slates at both the spawning and execution boundaries - sigset_t is now 64 bits. Having it be 128 bits was a mistake because there's no reason to use that and it's only supported by FreeBSD. By using the system word size, signal mask manipulation on Windows goes very fast. Furthermore @asyncsignalsafe funcs have been rewritten on Windows to take advantage of signal masking, now that it's much more pleasant to use. - All the overlapped i/o code on Windows has been rewritten for pretty good signal and cancelation safety. We're now able to ensure overlap data structures are cleaned up so long as you don't longjmp() out of out of a signal handler that interrupted an i/o operation. Latencies are also improved thanks to the removal of lots of "busy wait" code. Waits should be optimal for everything except poll(), which shall be the last and final demon we slay in the win32 i/o horror show. - getrusage() on Windows is now able to report RUSAGE_CHILDREN as well as RUSAGE_SELF, thanks to aggregation in the process manager thread.
2023-10-08 12:36:18 +00:00
BEGIN_CANCELATION_POINT;
rc = sys_getrandom(p, n, f);
Make improvements - We now serialize the file descriptor table when spawning / executing processes on Windows. This means you can now inherit more stuff than just standard i/o. It's needed by bash, which duplicates the console to file descriptor #255. We also now do a better job serializing the environment variables, so you're less likely to encounter E2BIG when using your bash shell. We also no longer coerce environ to uppercase - execve() on Windows now remotely controls its parent process to make them spawn a replacement for itself. Then it'll be able to terminate immediately once the spawn succeeds, without having to linger around for the lifetime as a shell process for proxying the exit code. When process worker thread running in the parent sees the child die, it's given a handle to the new child, to replace it in the process table. - execve() and posix_spawn() on Windows will now provide CreateProcess an explicit handle list. This allows us to remove handle locks which enables better fork/spawn concurrency, with seriously correct thread safety. Other codebases like Go use the same technique. On the other hand fork() still favors the conventional WIN32 inheritence approach which can be a little bit messy, but is *controlled* by guaranteeing perfectly clean slates at both the spawning and execution boundaries - sigset_t is now 64 bits. Having it be 128 bits was a mistake because there's no reason to use that and it's only supported by FreeBSD. By using the system word size, signal mask manipulation on Windows goes very fast. Furthermore @asyncsignalsafe funcs have been rewritten on Windows to take advantage of signal masking, now that it's much more pleasant to use. - All the overlapped i/o code on Windows has been rewritten for pretty good signal and cancelation safety. We're now able to ensure overlap data structures are cleaned up so long as you don't longjmp() out of out of a signal handler that interrupted an i/o operation. Latencies are also improved thanks to the removal of lots of "busy wait" code. Waits should be optimal for everything except poll(), which shall be the last and final demon we slay in the win32 i/o horror show. - getrusage() on Windows is now able to report RUSAGE_CHILDREN as well as RUSAGE_SELF, thanks to aggregation in the process manager thread.
2023-10-08 12:36:18 +00:00
END_CANCELATION_POINT;
2022-11-05 01:19:05 +00:00
}
} else if (IsFreebsd() || IsNetbsd()) {
rc = GetRandomBsd(p, n, GetRandomArnd);
#ifdef __x86_64__
} else if (IsMetal()) {
rc = sys_getrandom_metal(p, n, f);
#endif
} else {
Make improvements - We now serialize the file descriptor table when spawning / executing processes on Windows. This means you can now inherit more stuff than just standard i/o. It's needed by bash, which duplicates the console to file descriptor #255. We also now do a better job serializing the environment variables, so you're less likely to encounter E2BIG when using your bash shell. We also no longer coerce environ to uppercase - execve() on Windows now remotely controls its parent process to make them spawn a replacement for itself. Then it'll be able to terminate immediately once the spawn succeeds, without having to linger around for the lifetime as a shell process for proxying the exit code. When process worker thread running in the parent sees the child die, it's given a handle to the new child, to replace it in the process table. - execve() and posix_spawn() on Windows will now provide CreateProcess an explicit handle list. This allows us to remove handle locks which enables better fork/spawn concurrency, with seriously correct thread safety. Other codebases like Go use the same technique. On the other hand fork() still favors the conventional WIN32 inheritence approach which can be a little bit messy, but is *controlled* by guaranteeing perfectly clean slates at both the spawning and execution boundaries - sigset_t is now 64 bits. Having it be 128 bits was a mistake because there's no reason to use that and it's only supported by FreeBSD. By using the system word size, signal mask manipulation on Windows goes very fast. Furthermore @asyncsignalsafe funcs have been rewritten on Windows to take advantage of signal masking, now that it's much more pleasant to use. - All the overlapped i/o code on Windows has been rewritten for pretty good signal and cancelation safety. We're now able to ensure overlap data structures are cleaned up so long as you don't longjmp() out of out of a signal handler that interrupted an i/o operation. Latencies are also improved thanks to the removal of lots of "busy wait" code. Waits should be optimal for everything except poll(), which shall be the last and final demon we slay in the win32 i/o horror show. - getrusage() on Windows is now able to report RUSAGE_CHILDREN as well as RUSAGE_SELF, thanks to aggregation in the process manager thread.
2023-10-08 12:36:18 +00:00
BEGIN_CANCELATION_POINT;
rc = GetDevUrandom(p, n);
Make improvements - We now serialize the file descriptor table when spawning / executing processes on Windows. This means you can now inherit more stuff than just standard i/o. It's needed by bash, which duplicates the console to file descriptor #255. We also now do a better job serializing the environment variables, so you're less likely to encounter E2BIG when using your bash shell. We also no longer coerce environ to uppercase - execve() on Windows now remotely controls its parent process to make them spawn a replacement for itself. Then it'll be able to terminate immediately once the spawn succeeds, without having to linger around for the lifetime as a shell process for proxying the exit code. When process worker thread running in the parent sees the child die, it's given a handle to the new child, to replace it in the process table. - execve() and posix_spawn() on Windows will now provide CreateProcess an explicit handle list. This allows us to remove handle locks which enables better fork/spawn concurrency, with seriously correct thread safety. Other codebases like Go use the same technique. On the other hand fork() still favors the conventional WIN32 inheritence approach which can be a little bit messy, but is *controlled* by guaranteeing perfectly clean slates at both the spawning and execution boundaries - sigset_t is now 64 bits. Having it be 128 bits was a mistake because there's no reason to use that and it's only supported by FreeBSD. By using the system word size, signal mask manipulation on Windows goes very fast. Furthermore @asyncsignalsafe funcs have been rewritten on Windows to take advantage of signal masking, now that it's much more pleasant to use. - All the overlapped i/o code on Windows has been rewritten for pretty good signal and cancelation safety. We're now able to ensure overlap data structures are cleaned up so long as you don't longjmp() out of out of a signal handler that interrupted an i/o operation. Latencies are also improved thanks to the removal of lots of "busy wait" code. Waits should be optimal for everything except poll(), which shall be the last and final demon we slay in the win32 i/o horror show. - getrusage() on Windows is now able to report RUSAGE_CHILDREN as well as RUSAGE_SELF, thanks to aggregation in the process manager thread.
2023-10-08 12:36:18 +00:00
END_CANCELATION_POINT;
2022-11-05 01:19:05 +00:00
}
return rc;
2022-11-05 01:19:05 +00:00
}
2020-06-15 14:18:57 +00:00
/**
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
* Returns cryptographic random data.
*
* This random number seed generator obtains information from:
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
*
* - ProcessPrng() on Windows
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
* - getentropy() on XNU and OpenBSD
* - getrandom() on Linux, FreeBSD, and NetBSD
* - sysctl(KERN_ARND) on older versions of FreeBSD and NetBSD
*
* Unlike getentropy() this function is interruptible. However EINTR
* shouldn't be possible if `f` is zero and `n` is no more than 256,
* noting that kernels are a bit vague with their promises here, and
* if you're willing to trade some performance for a more assurances
* that EINTR won't happen, then either consider using getentropy(),
* or using the `SA_RESTART` flag on your signal handlers.
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
*
* Unlike getentropy() you may specify an `n` greater than 256. When
* larger amounts are specified, the caller must be prepared for the
* case where fewer than `n` bytes are returned. In that case, it is
* likely that a signal delivery occured. Cancellations in mask mode
* also need to be suppressed while processing the bytes beyond 256.
* On BSD OSes, this entire process is uninterruptible so be careful
* when using large sizes if interruptibility is needed.
2020-06-15 14:18:57 +00:00
*
Make improvements - We now serialize the file descriptor table when spawning / executing processes on Windows. This means you can now inherit more stuff than just standard i/o. It's needed by bash, which duplicates the console to file descriptor #255. We also now do a better job serializing the environment variables, so you're less likely to encounter E2BIG when using your bash shell. We also no longer coerce environ to uppercase - execve() on Windows now remotely controls its parent process to make them spawn a replacement for itself. Then it'll be able to terminate immediately once the spawn succeeds, without having to linger around for the lifetime as a shell process for proxying the exit code. When process worker thread running in the parent sees the child die, it's given a handle to the new child, to replace it in the process table. - execve() and posix_spawn() on Windows will now provide CreateProcess an explicit handle list. This allows us to remove handle locks which enables better fork/spawn concurrency, with seriously correct thread safety. Other codebases like Go use the same technique. On the other hand fork() still favors the conventional WIN32 inheritence approach which can be a little bit messy, but is *controlled* by guaranteeing perfectly clean slates at both the spawning and execution boundaries - sigset_t is now 64 bits. Having it be 128 bits was a mistake because there's no reason to use that and it's only supported by FreeBSD. By using the system word size, signal mask manipulation on Windows goes very fast. Furthermore @asyncsignalsafe funcs have been rewritten on Windows to take advantage of signal masking, now that it's much more pleasant to use. - All the overlapped i/o code on Windows has been rewritten for pretty good signal and cancelation safety. We're now able to ensure overlap data structures are cleaned up so long as you don't longjmp() out of out of a signal handler that interrupted an i/o operation. Latencies are also improved thanks to the removal of lots of "busy wait" code. Waits should be optimal for everything except poll(), which shall be the last and final demon we slay in the win32 i/o horror show. - getrusage() on Windows is now able to report RUSAGE_CHILDREN as well as RUSAGE_SELF, thanks to aggregation in the process manager thread.
2023-10-08 12:36:18 +00:00
* Unlike getentropy() this function is a cancelation point. But it
* shouldn't be a problem, unless you're using masked mode, in which
* case extra care must be taken to consider the result.
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
*
* It's recommended that `f` be set to zero, although it may include
* the following flags:
*
* - `GRND_NONBLOCK` when you want to elevate the insecurity of your
* random data
*
* - `GRND_RANDOM` if you want to have the best possible chance your
* program will freeze and the system operator is paged to address
* the outage by driving to the data center and jiggling the mouse
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
*
* @note this function could block a nontrivial time on old computers
* @note this function is indeed intended for cryptography
* @note this function takes around 900 cycles
2022-10-02 21:58:14 +00:00
* @raise EINVAL if `f` is invalid
* @raise ECANCELED if thread was cancelled in masked mode
* @raise EFAULT if the `n` bytes at `p` aren't valid memory
* @raise EINTR if we needed to block and a signal was delivered instead
Make improvements - We now serialize the file descriptor table when spawning / executing processes on Windows. This means you can now inherit more stuff than just standard i/o. It's needed by bash, which duplicates the console to file descriptor #255. We also now do a better job serializing the environment variables, so you're less likely to encounter E2BIG when using your bash shell. We also no longer coerce environ to uppercase - execve() on Windows now remotely controls its parent process to make them spawn a replacement for itself. Then it'll be able to terminate immediately once the spawn succeeds, without having to linger around for the lifetime as a shell process for proxying the exit code. When process worker thread running in the parent sees the child die, it's given a handle to the new child, to replace it in the process table. - execve() and posix_spawn() on Windows will now provide CreateProcess an explicit handle list. This allows us to remove handle locks which enables better fork/spawn concurrency, with seriously correct thread safety. Other codebases like Go use the same technique. On the other hand fork() still favors the conventional WIN32 inheritence approach which can be a little bit messy, but is *controlled* by guaranteeing perfectly clean slates at both the spawning and execution boundaries - sigset_t is now 64 bits. Having it be 128 bits was a mistake because there's no reason to use that and it's only supported by FreeBSD. By using the system word size, signal mask manipulation on Windows goes very fast. Furthermore @asyncsignalsafe funcs have been rewritten on Windows to take advantage of signal masking, now that it's much more pleasant to use. - All the overlapped i/o code on Windows has been rewritten for pretty good signal and cancelation safety. We're now able to ensure overlap data structures are cleaned up so long as you don't longjmp() out of out of a signal handler that interrupted an i/o operation. Latencies are also improved thanks to the removal of lots of "busy wait" code. Waits should be optimal for everything except poll(), which shall be the last and final demon we slay in the win32 i/o horror show. - getrusage() on Windows is now able to report RUSAGE_CHILDREN as well as RUSAGE_SELF, thanks to aggregation in the process manager thread.
2023-10-08 12:36:18 +00:00
* @cancelationpoint
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
* @asyncsignalsafe
* @restartable
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
* @vforksafe
2020-06-15 14:18:57 +00:00
*/
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
ssize_t getrandom(void *p, size_t n, unsigned f) {
ssize_t rc;
if ((!p && n) || (IsAsan() && !__asan_is_valid(p, n))) {
rc = efault();
2023-10-09 00:56:59 +00:00
} else if (f & ~(GRND_RANDOM | GRND_NONBLOCK)) {
2022-10-02 21:58:14 +00:00
rc = einval();
Make numerous improvements - Python static hello world now 1.8mb - Python static fully loaded now 10mb - Python HTTPS client now uses MbedTLS - Python REPL now completes import stmts - Increase stack size for Python for now - Begin synthesizing posixpath and ntpath - Restore Python \N{UNICODE NAME} support - Restore Python NFKD symbol normalization - Add optimized code path for Intel SHA-NI - Get more Python unit tests passing faster - Get Python help() pagination working on NT - Python hashlib now supports MbedTLS PBKDF2 - Make memcpy/memmove/memcmp/bcmp/etc. faster - Add Mersenne Twister and Vigna to LIBC_RAND - Provide privileged __printf() for error code - Fix zipos opendir() so that it reports ENOTDIR - Add basic chmod() implementation for Windows NT - Add Cosmo's best functions to Python cosmo module - Pin function trace indent depth to that of caller - Show memory diagram on invalid access in MODE=dbg - Differentiate stack overflow on crash in MODE=dbg - Add stb_truetype and tools for analyzing font files - Upgrade to UNICODE 13 and reduce its binary footprint - COMPILE.COM now logs resource usage of build commands - Start implementing basic poll() support on bare metal - Set getauxval(AT_EXECFN) to GetModuleFileName() on NT - Add descriptions to strerror() in non-TINY build modes - Add COUNTBRANCH() macro to help with micro-optimizations - Make error / backtrace / asan / memory code more unbreakable - Add fast perfect C implementation of μ-Law and a-Law audio codecs - Make strtol() functions consistent with other libc implementations - Improve Linenoise implementation (see also github.com/jart/bestline) - COMPILE.COM now suppresses stdout/stderr of successful build commands
2021-09-28 05:58:51 +00:00
} else {
rc = __getrandom(p, n, f);
2020-06-15 14:18:57 +00:00
}
STRACE("getrandom(%p, %'zu, %#x) → %'ld% m", p, n, f, rc);
2020-06-15 14:18:57 +00:00
return rc;
}
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
Release Cosmopolitan v3.3 This change upgrades to GCC 12.3 and GNU binutils 2.42. The GNU linker appears to have changed things so that only a single de-duplicated str table is present in the binary, and it gets placed wherever the linker wants, regardless of what the linker script says. To cope with that we need to stop using .ident to embed licenses. As such, this change does significant work to revamp how third party licenses are defined in the codebase, using `.section .notice,"aR",@progbits`. This new GCC 12.3 toolchain has support for GNU indirect functions. It lets us support __target_clones__ for the first time. This is used for optimizing the performance of libc string functions such as strlen and friends so far on x86, by ensuring AVX systems favor a second codepath that uses VEX encoding. It shaves some latency off certain operations. It's a useful feature to have for scientific computing for the reasons explained by the test/libcxx/openmp_test.cc example which compiles for fifteen different microarchitectures. Thanks to the upgrades, it's now also possible to use newer instruction sets, such as AVX512FP16, VNNI. Cosmo now uses the %gs register on x86 by default for TLS. Doing it is helpful for any program that links `cosmo_dlopen()`. Such programs had to recompile their binaries at startup to change the TLS instructions. That's not great, since it means every page in the executable needs to be faulted. The work of rewriting TLS-related x86 opcodes, is moved to fixupobj.com instead. This is great news for MacOS x86 users, since we previously needed to morph the binary every time for that platform but now that's no longer necessary. The only platforms where we need fixup of TLS x86 opcodes at runtime are now Windows, OpenBSD, and NetBSD. On Windows we morph TLS to point deeper into the TIB, based on a TlsAlloc assignment, and on OpenBSD/NetBSD we morph %gs back into %fs since the kernels do not allow us to specify a value for the %gs register. OpenBSD users are now required to use APE Loader to run Cosmo binaries and assimilation is no longer possible. OpenBSD kernel needs to change to allow programs to specify a value for the %gs register, or it needs to stop marking executable pages loaded by the kernel as mimmutable(). This release fixes __constructor__, .ctor, .init_array, and lastly the .preinit_array so they behave the exact same way as glibc. We no longer use hex constants to define math.h symbols like M_PI.
2024-02-20 19:12:09 +00:00
__attribute__((__constructor__(30))) static textstartup void getrandom_init(
void) {
int e, rc;
if (IsWindows() || IsMetal())
return;
Make improvements - We now serialize the file descriptor table when spawning / executing processes on Windows. This means you can now inherit more stuff than just standard i/o. It's needed by bash, which duplicates the console to file descriptor #255. We also now do a better job serializing the environment variables, so you're less likely to encounter E2BIG when using your bash shell. We also no longer coerce environ to uppercase - execve() on Windows now remotely controls its parent process to make them spawn a replacement for itself. Then it'll be able to terminate immediately once the spawn succeeds, without having to linger around for the lifetime as a shell process for proxying the exit code. When process worker thread running in the parent sees the child die, it's given a handle to the new child, to replace it in the process table. - execve() and posix_spawn() on Windows will now provide CreateProcess an explicit handle list. This allows us to remove handle locks which enables better fork/spawn concurrency, with seriously correct thread safety. Other codebases like Go use the same technique. On the other hand fork() still favors the conventional WIN32 inheritence approach which can be a little bit messy, but is *controlled* by guaranteeing perfectly clean slates at both the spawning and execution boundaries - sigset_t is now 64 bits. Having it be 128 bits was a mistake because there's no reason to use that and it's only supported by FreeBSD. By using the system word size, signal mask manipulation on Windows goes very fast. Furthermore @asyncsignalsafe funcs have been rewritten on Windows to take advantage of signal masking, now that it's much more pleasant to use. - All the overlapped i/o code on Windows has been rewritten for pretty good signal and cancelation safety. We're now able to ensure overlap data structures are cleaned up so long as you don't longjmp() out of out of a signal handler that interrupted an i/o operation. Latencies are also improved thanks to the removal of lots of "busy wait" code. Waits should be optimal for everything except poll(), which shall be the last and final demon we slay in the win32 i/o horror show. - getrusage() on Windows is now able to report RUSAGE_CHILDREN as well as RUSAGE_SELF, thanks to aggregation in the process manager thread.
2023-10-08 12:36:18 +00:00
BLOCK_CANCELATION;
e = errno;
if (!(rc = sys_getrandom(0, 0, 0))) {
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
have_getrandom = true;
2022-11-03 16:32:12 +00:00
} else {
errno = e;
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
}
Make improvements - We now serialize the file descriptor table when spawning / executing processes on Windows. This means you can now inherit more stuff than just standard i/o. It's needed by bash, which duplicates the console to file descriptor #255. We also now do a better job serializing the environment variables, so you're less likely to encounter E2BIG when using your bash shell. We also no longer coerce environ to uppercase - execve() on Windows now remotely controls its parent process to make them spawn a replacement for itself. Then it'll be able to terminate immediately once the spawn succeeds, without having to linger around for the lifetime as a shell process for proxying the exit code. When process worker thread running in the parent sees the child die, it's given a handle to the new child, to replace it in the process table. - execve() and posix_spawn() on Windows will now provide CreateProcess an explicit handle list. This allows us to remove handle locks which enables better fork/spawn concurrency, with seriously correct thread safety. Other codebases like Go use the same technique. On the other hand fork() still favors the conventional WIN32 inheritence approach which can be a little bit messy, but is *controlled* by guaranteeing perfectly clean slates at both the spawning and execution boundaries - sigset_t is now 64 bits. Having it be 128 bits was a mistake because there's no reason to use that and it's only supported by FreeBSD. By using the system word size, signal mask manipulation on Windows goes very fast. Furthermore @asyncsignalsafe funcs have been rewritten on Windows to take advantage of signal masking, now that it's much more pleasant to use. - All the overlapped i/o code on Windows has been rewritten for pretty good signal and cancelation safety. We're now able to ensure overlap data structures are cleaned up so long as you don't longjmp() out of out of a signal handler that interrupted an i/o operation. Latencies are also improved thanks to the removal of lots of "busy wait" code. Waits should be optimal for everything except poll(), which shall be the last and final demon we slay in the win32 i/o horror show. - getrusage() on Windows is now able to report RUSAGE_CHILDREN as well as RUSAGE_SELF, thanks to aggregation in the process manager thread.
2023-10-08 12:36:18 +00:00
ALLOW_CANCELATION;
STRACE("sys_getrandom(0,0,0) → %d% m", rc);
Add SSL to redbean Your redbean can now interoperate with clients that require TLS crypto. This is accomplished using a protocol polyglot that lets us distinguish between HTTP and HTTPS regardless of the port number. Certificates will be generated automatically, if none are supplied by the user. Footprint increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb - Add lseek() polyfills for ZIP executable - Automatically polyfill /tmp/FOO paths on NT - Fix readdir() / ftw() / nftw() bugs on Windows - Introduce -B flag for slower SSL that's stronger - Remove mbedtls features Cosmopolitan doesn't need - Have base64 decoder support the uri-safe alternative - Remove Truncated HMAC because it's forbidden by the IETF - Add all the mbedtls test suites and make them go 3x faster - Support opendir() / readdir() / closedir() on ZIP executable - Use Everest for ECDHE-ECDSA because it's so good it's so good - Add tinier implementation of sha1 since it's not worth the rom - Add chi-square monte-carlo mean correlation tests for getrandom() - Source entropy on Windows from the proper interface everyone uses We're continuing to outperform NGINX and other servers on raw message throughput. Using SSL means that instead of 1,000,000 qps you can get around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL handshakes, since redbean can do 2,627 per second and NGINX does 4.3k Right now, the SSL UX story works best if you give your redbean a key signing key since that can be easily generated by openssl using a one liner then redbean will do all the things that are impossibly hard to do like signing ecdsa and rsa certificates that'll work in chrome. We should integrate the let's encrypt acme protocol in the future. Live Demo: https://redbean.justine.lol/ Root Cert: https://redbean.justine.lol/redbean1.crt
2021-06-24 19:31:26 +00:00
}