This new script is an alternative to the `cosmocc` command. It's still a
work in progress. It abstracts all the gory details of building separate
copies of your executable and then running the apelink.com program.
If you build a static ELF executable in `ld -q` mode (which leaves rela
sections inside the binary) then you can run it through the elf2pe.com
program afterwards, which will turn it into a PE executable. We have a
new trick for defining WIN32 DLL imports in C without any assembly code.
This also achieves the optimally tiny and perfect PE binary structure.
We need this because it isn't possible to have a GNU ld linker script
generate a PE file where the virtual pointer and the file pointer can
drift apart. This post-linker can do that. One cool benefit is we can
now use a smaller 512-byte alignment in the file, and an even bigger
64kb alignment for the segment virtual addresses, and the executable
ends up being smaller.
Another program introduced by this change is pecheck.com which can do
extensive linting of PE static executables to help explain why Windows
won't load it.
This version has better error messages and safety checks. It supports
loading static position-independent executables. It correctly handles
more kinds of weird ELF program header layouts. A force flag has been
added to avoid system execve(). Finally the longstanding misalignment
with our ELF PT_NOTE section has been addressed.
This change (1) upgrades to OpenBSD's newer kernel ABIs, and (2)
modifies APE to have a read-only data segment. Doing this required
creating APE Loader v1.1, which is backwards and forwards compatible
with the previous version.
If you've run the following commands in the past to install your APE
Loader systemwide, then you need to run them again. Ad-hoc installations
shouldn't be impacted. It's also recommended that APE binaries be remade
after upgrading, since they embed old versions of the APE Loader.
ape/apeuninstall.sh
ape/apeinstall.sh
This change does more than just fix OpenBSD. The new loader is smarter
and more reliable. We're now able create much tinier ELF and Mach-O data
structures than we could before. Both APE Loader and execvpe() will now
normalize ambiguous argv[0] resolution the same way as the UNIX shell.
Badness with TLS linkage has been solved.
Fixes#826
This change fixes an issue with the tcflow() magic numbers that was
causing bash to freeze up on Linux. While auditing termios polyfills,
several other issues were identified with XNU/BSD compatibility.
Out of an abundance of caution this change undefines as much surface
area from libc/calls/struct/termios.h as possible, so that autoconf
scripts are less likely to detect non-POSIX teletypewriter APIs that
haven't been polyfilled by Cosmopolitan.
This is a *breaking change* for your static archives in /opt/cosmos if
you use the cosmocc toolchain. That's because this change disables the
ioctl() undiamonding trick for code outside the monorepo, specifically
because it'll lead to brittle ABI breakages like this. If you're using
the cosmocc toolchain, you'll need to rebuild libraries like ncurses,
readline, etc. Yes diamonds cause bloat. To work around that, consider
using tcgetwinsize() instead of ioctl(TIOCGWINSZ) since it'll help you
avoid pulling every single ioctl-related polyfill into the linkage.
The cosmocc script was specifying -DNDEBUG for some reason. It's fixed.
This change takes an entirely new approach to the incremental linking of
pkzip executables. The assets created by zipobj.com are now treated like
debug data. After a .com.dbg is compiled, fixupobj.com should be run, so
it can apply fixups to the offsets and move the zip directory to the end
of the file. Since debug data doesn't get objcopy'd, a new tool has been
introduced called zipcopy.com which should be run after objcopy whenever
a .com file is created. This is all automated by the `cosmocc` toolchain
which is rapidly becoming the new recommended approach.
This change also introduces the new C23 checked arithmetic macros.
This change integrates e58abc1110b335a3341e8ad5821ad8e3880d9bb2 from
https://github.com/ahgamut/musl-cross-make/ which fixes the issues we
were having with our C language extension for symbolic constants. This
change also performs some code cleanup and bug fixes to getaddrinfo().
It's now possible to compile projects like ncurses, readline and python
without needing to patch anything upstream, except maybe a line or two.
Pretty soon it should be possible to build a Linux distro on Cosmo.
- Work towards improving non-optimized build support
- Introduce MODE=zero which is -O0 without ASAN/UBSAN
- Use system GCC when ~/.cosmo.mk has USE_SYSTEM_TOOLCHAIN=1
- Have package.com check .privileged code doesn't call non-privileged
This change implements a new approach to function call logging, that's
based on the GCC flag: -fpatchable-function-entry. Read the commentary
in build/config.mk to learn how it works.
There's a new program named ape/ape-m1.c which will be used to build an
embeddable binary that can load ape and elf executables. The support is
mostly working so far, but still chasing down ABI issues.
- Perform some housekeeping on scalar math function code
- Import ARM's Optimized Routines for SIMD string processing
- Upgrade to latest Chromium zlib and enable more SIMD optimizations
This change reduces the .bss memory requirement for all executables by
O(64kb). The brk system calls are now fully tested and figured out and
might be useful for tiny programs that only target System Five.
This change restores the .symtab symbol table files in our flagship
programs (e.g. redbean.com, python.com) needed to show backtraces. This
also rolls back earlier changes to zip.com w.r.t. temp directories since
the right way to do it turned out to be the -b DIR flag.
This change also improves the performance of zip.com. It turned out
mmap() wasn't being used, because zip.com was assuming a 4096-byte
granularity, but cosmo requires 65536. There was also a chance to speed
up stdio scanning using the unlocked functions.
This change fixes Landlock Make so that only the output target file is
unveiled, rather than unveiling the directory that contains it. This
gives us a much stronger sandbox. It also helped identify problematic
build code in our repo that should have been using o/tmp instead.
Landlock isn't able to let us unveil files that don't exist. Even if
they do, then once a file is deleted, the sandboxing for it goes away.
This caused problems for Landlock Make because tools like GNU LD will
repeatedly delete and recreate the output file. This change uses the
compile.com wrapper to ensure on changes happen to the output inode.
New binary available on https://justine.lol/make/Fixes#528
The whole repository is now buildable with GNU Make Landlock sandboxing.
This proves that no Makefile targets exist which touch files other than
their declared prerequisites. In order to do this, we had to:
1. Stop code morphing GCC output in package.com and instead run a
newly introduced FIXUPOBJ.COM command after GCC invocations.
2. Disable all the crumby Python unit tests that do things like create
files in the current directory, or rename() files between folders.
This ended up being a lot of tests, but most of them are still ok.
3. Introduce an .UNSANDBOXED variable to GNU Make to disable Landlock.
We currently only do this for things like `make tags`.
4. This change deletes some GNU Make code that was preventing the
execve() optimization from working. This means it should no longer
be necessary in most cases for command invocations to be indirected
through the cocmd interpreter.
5. Missing dependencies had to be declared in certain places, in cases
where they couldn't be automatically determined by MKDEPS.COM
6. The libcxx header situation has finally been tamed. One of the
things that makes this difficult is MKDEPS.COM only wants to
consider the first 64kb of a file, in order to go fast. But libcxx
likes to have #include lines buried after huge documentation.
7. An .UNVEIL variable has been introduced to GNU Make just in case
we ever wish to explicitly specify additional things that need to
be whitelisted which aren't strictly prerequisites. This works in
a manner similar to the recently introduced .EXTRA_PREREQS feature.
There's now a new build/bootstrap/make.com prebuilt binary available. It
should no longer be possible to write invalid Makefile code.
We now rewrite the binary image at runtime on Windows and XNU to change
mov %fs:0,%reg instructions to use %gs instead. There's also simpler
threading API introduced by this change and it's called _spawn() and
_join(), which has replaced most clone() usage.
- Introduce __assert_disable global
- Improve strsignal() thread safety
- Make system call tracing thread safe
- Fix SO_RCVTIMEO / SO_SNDTIMEO on Windows
- Refactor DescribeFoo() functions into one place
- Fix fork() on Windows when TLS and MAP_STACK exist
- Round upwards in setsockopt(SO_RCVTIMEO) on Windows
- Disable futexes on OpenBSD which seem extremely broken
- Implement a better kludge for monotonic time on Windows
- Fix some minor issues in ar.com
- Have execve() look for `ape` command
- Rewrite NT paths using /c/ rather /??/c:/
- Replace broken GCC symlinks with .sym files
- Rewrite $PATH environment variables on startup
- Make $(APE_NO_MODIFY_SELF) the default bootloader
- Add all build command dependencies to build/bootstrap
- Get the repository mostly building from source on non-Linux
- Expand redbean UNIX module
- Expand redbean documentation
- Ensure Lua copyright is embedded in binary
- Increase the PATH_MAX limit especially on NT
- Use column major sorting for linenoise completions
- Fix some suboptimalities in redbean's new UNIX API
- Figured out right flags for Multics newline in raw mode
You can now use the hardest fastest and most dangerous language there is
with Cosmopolitan. So far about 75% of LLVM libcxx has been added. A few
breaking changes needed to be made to help this go smoothly.
- Rename nothrow to dontthrow
- Rename nodiscard to dontdiscard
- Add some libm functions, e.g. lgamma, nan, etc.
- Change intmax_t from int128 to int64 like everything else
- Introduce %jjd formatting directive for int128_t
- Introduce strtoi128(), strtou128(), etc.
- Rename bsrmax() to bsr128()
Some of the templates that should be working currently are std::vector,
std::string, std::map, std::set, std::deque, etc.
