At least in neovim, `│vi:` is not recognized as a modeline because it
has no preceding whitespace. After fixing this, opening a file yields
an error because `net` is not an option. (`noet`, however, is.)
- We now serialize the file descriptor table when spawning / executing
processes on Windows. This means you can now inherit more stuff than
just standard i/o. It's needed by bash, which duplicates the console
to file descriptor #255. We also now do a better job serializing the
environment variables, so you're less likely to encounter E2BIG when
using your bash shell. We also no longer coerce environ to uppercase
- execve() on Windows now remotely controls its parent process to make
them spawn a replacement for itself. Then it'll be able to terminate
immediately once the spawn succeeds, without having to linger around
for the lifetime as a shell process for proxying the exit code. When
process worker thread running in the parent sees the child die, it's
given a handle to the new child, to replace it in the process table.
- execve() and posix_spawn() on Windows will now provide CreateProcess
an explicit handle list. This allows us to remove handle locks which
enables better fork/spawn concurrency, with seriously correct thread
safety. Other codebases like Go use the same technique. On the other
hand fork() still favors the conventional WIN32 inheritence approach
which can be a little bit messy, but is *controlled* by guaranteeing
perfectly clean slates at both the spawning and execution boundaries
- sigset_t is now 64 bits. Having it be 128 bits was a mistake because
there's no reason to use that and it's only supported by FreeBSD. By
using the system word size, signal mask manipulation on Windows goes
very fast. Furthermore @asyncsignalsafe funcs have been rewritten on
Windows to take advantage of signal masking, now that it's much more
pleasant to use.
- All the overlapped i/o code on Windows has been rewritten for pretty
good signal and cancelation safety. We're now able to ensure overlap
data structures are cleaned up so long as you don't longjmp() out of
out of a signal handler that interrupted an i/o operation. Latencies
are also improved thanks to the removal of lots of "busy wait" code.
Waits should be optimal for everything except poll(), which shall be
the last and final demon we slay in the win32 i/o horror show.
- getrusage() on Windows is now able to report RUSAGE_CHILDREN as well
as RUSAGE_SELF, thanks to aggregation in the process manager thread.
readdir() will now always yield an inode that's consistent with stat()
on ZipOS and Windows in general. More APIs have been updated to return
the appropriate error code when inappropriately trying to do ops, like
sockets, with a zip file descriptor. The path normalization algorithms
are now fully fleshed out. Some socket APIs have been fixed so they'll
raise EBADF vs. ENOTSOCK appropriately. Lastly seekdir() will now work
properly on NetBSD and FreeBSD (not sure why anyone would even use it)
- Exhaustively document cancellation points
- Rename SIGCANCEL to SIGTHR just like BSDs
- Further improve POSIX thread cancellations
- Ensure asynchronous cancellations work correctly
- Elevate the quality of getrandom() and getentropy()
- Make futexes cancel correctly on OpenBSD 6.x and 7.x
- Add reboot.com and shutdown.com to examples directory
- Remove underscore prefix from awesome timespec_*() APIs
- Create assertions that help verify our cancellation points
- Remove bad timespec APIs (cmp generalizes eq/ne/gt/gte/lt/lte)
This change makes some miracle modifications to the System Five system
call support, which lets us have safe, correct, and atomic handling of
thread cancellations. It all turned out to be cheaper than anticipated
because it wasn't necessary to modify the system call veneers. We were
able to encode the cancellability of each system call into the magnums
found in libc/sysv/syscalls.sh. Since cancellations are so waq, we are
also supporting a lovely Musl Libc mask feature for raising ECANCELED.
All tests pass now under WSL2. They should pass under WSL1 too, but only
WSL2 is integrated into the test fleet right now. This change also fills
in some gaps in the error numbers.
Fixes#665
This change addresses various open source compatibility issues, so that
we pass 313/411 of the tests in https://github.com/jart/libc-test where
earlier today we were passing about 30/411 of them, due to header toil.
Please note that Glibc only passes 341/411 so 313 today is pretty good!
- Make the conformance of libc/isystem/ headers nearly perfect
- Import more of the remaining math library routines from Musl
- Fix inconsistencies with type signatures of calls like umask
- Write tests for getpriority/setpriority which work great now
- conform to `struct sockaddr *` on remaining socket functions
- Import a bunch of uninteresting stdlib functions e.g. rand48
- Introduce readdir_r, scandir, pthread_kill, sigsetjmp, etc..
Follow the instructions in our `tool/scripts/cosmocc` toolchain to run
these tests yourself. You use `make CC=cosmocc` on the test repository
This makes breaking changes to add underscores to many non-standard
function names provided by the c library. MODE=tiny is now tinier and
we now use smaller locks that are better for tiny apps in this mode.
Some headers have been renamed to be in the same folder as the build
package, so it'll be easier to know which build dependency is needed.
Certain old misguided interfaces have been removed. Intel intrinsics
headers are now listed in libc/isystem (but not in the amalgamation)
to help further improve open source compatibility. Header complexity
has also been reduced. Lastly, more shell scripts are now available.
This change introduces the nointernet() function which may be called to
prevent a process and its descendants from communicating with publicly
routable Internet addresses. GNU Make has been modified to always call
this function. In the future Landlock Make will have a way to whitelist
subnets to override this behavior, or disable it entirely. Support is
available for Linux only. Our firewall does not require root access.
Calling nointernet() will return control to the caller inside a new
process that has a SECCOMP BPF filter installed, which traps network
related system calls. Your original process then becomes a permanent
ptrace() supervisor that monitors all processes and threads descending
from the returned child. Whenever a networking system call happens the
kernel will stop the process and wakes up the monitor, which then peeks
into the child memory to read the sockaddr_in to determine if it's ok.
The downside to doing this is that there can be only one supervisor at a
time using ptrace() on a process. So this firewall won't be enabled if
you run make under strace or inside gdb. It also makes testing tricky.
- Introduce __assert_disable global
- Improve strsignal() thread safety
- Make system call tracing thread safe
- Fix SO_RCVTIMEO / SO_SNDTIMEO on Windows
- Refactor DescribeFoo() functions into one place
- Fix fork() on Windows when TLS and MAP_STACK exist
- Round upwards in setsockopt(SO_RCVTIMEO) on Windows
- Disable futexes on OpenBSD which seem extremely broken
- Implement a better kludge for monotonic time on Windows
This change fixes a regression in unix.connect() caused by the recent
addition of UNIX domain sockets. The BSD finger command has been added
to third_party for fun and profit. A new demo has been added to redbean
showing how a protocol as simple as finger can be implemented.
- Fix bugs in kDos2Errno definition
- malloc() should now be thread safe
- Fix bug in rollup.com header generator
- Fix open(O_APPEND) on the New Technology
- Fix select() on the New Technology and test it
- Work towards refactoring i/o for thread safety
- Socket reads and writes on NT now poll for signals
- Work towards i/o completion ports on the New Technology
- Make read() and write() intermittently check for signals
- Blinkenlights keyboard i/o so much better on NT w/ poll()
- You can now poll() files and sockets at the same time on NT
- Fix bug in appendr() that manifests with dlmalloc footers off
- Fix sigsuspend() on XNU
- Fix strsignal() on non-Linux
- Add unit tests for strsignal()
- Add unit tests for setitimer()
- Add unit tests for sigsuspend()
- Rewrite setitimer() for New Technology
- Rewrite nanosleep() for New Technology
- Polyfill SIGALRM on the New Technology
- select(0,0,0,0) on NT now calls pause()
- Remove some NTDLL calls that aren't needed
- Polyfill SA_NOCLDWAIT on the New Technology
- Polyfill SA_RESETHAND on the New Technology
- Polyfill sigprocmask() on the New Technology
- Polyfill SIGCHLD+SIG_IGN on the New Technology
- Polyfill SA_RESTART masking on the New Technology
- Deliver console signals from main thread on New Technology
- Document SA_RESTART behavior w/ @sarestartable / @norestart
- System call trace in MODE=dbg now prints inherited FDs and signal mask
This is similar to the --ftrace (c function call trace) flag, except
it's less noisy since it only logs system calls to stderr. Having this
flag is valuable because (1) system call tracing tells us a lot about
the behavior of complex programs and (2) it's usually very hard to get
system call tracing on various operating systems, e.g. strace, ktrace,
dtruss, truss, nttrace, etc. Especially on Apple platforms where even
with the special boot trick, debuggers still aren't guaranteed to work.
make -j8 o//examples
o//examples/hello.com --strace
This is enabled by default in MODE=, MODE=opt, and MODE=dbg. In MODE=dbg
extra information will be printed.
make -j8 MODE=dbg o/dbg/examples
o/dbg/examples/hello.com --strace |& less
This change also changes:
- Rename IsText() → _istext()
- Rename IsUtf8() → _isutf8()
- Fix madvise() on Windows NT
- Fix empty string case of inet_ntop()
- vfork() wrapper now saves and restores errno
- Update xsigaction() to yoink syscall support
The ZIP filesystem has a breaking change. You now need to use /zip/ to
open() / opendir() / etc. assets within the ZIP structure of your APE
binary, instead of the previous convention of using zip: or zip! URIs.
This is needed because Python likes to use absolute paths, and having
ZIP paths encoded like URIs simply broke too many things.
Many more system calls have been updated to be able to operate on ZIP
files and file descriptors. In particular fcntl() and ioctl() since
Python would do things like ask if a ZIP file is a terminal and get
confused when the old implementation mistakenly said yes, because the
fastest way to guarantee native file descriptors is to dup(2). This
change also improves the async signal safety of zipos and ensures it
doesn't maintain any open file descriptors beyond that which the user
has opened.
This change makes a lot of progress towards adding magic numbers that
are specific to platforms other than Linux. The philosophy here is that,
if you use an operating system like FreeBSD, then you should be able to
take advantage of FreeBSD exclusive features, even if we don't polyfill
them on other platforms. For example, you can now open() a file with the
O_VERIFY flag. If your program runs on other platforms, then Cosmo will
automatically set O_VERIFY to zero. This lets you safely use it without
the need for #ifdef or ifstatements which detract from readability.
One of the blindspots of the ASAN memory hardening we use to offer Rust
like assurances has always been that memory passed to the kernel via
system calls (e.g. writev) can't be checked automatically since the
kernel wasn't built with MODE=asan. This change makes more progress
ensuring that each system call will verify the soundness of memory
before it's passed to the kernel. The code for doing these checks is
fast, particularly for buffers, where it can verify 64 bytes a cycle.
- Correct O_LOOP definition on NT
- Introduce program_executable_name
- Add ASAN guards to more system calls
- Improve termios compatibility with BSDs
- Fix bug in Windows auxiliary value encoding
- Add BSD and XNU specific errnos and open flags
- Add check to ensure build doesn't talk to internet
- Emulator can now test the αcτµαlly pδrταblε εxεcµταblε bootloader
- Whipped up a webserver named redbean. It services 150k requests per
second on a single core. Bundling assets inside zip enables extremely
fast serving for two reasons. The first is that zip central directory
lookups go faster than stat() system calls. The second is that both
zip and gzip content-encoding use DEFLATE, therefore, compressed
responses can be served via the sendfile() system call which does an
in-kernel copy directly from the zip executable structure. Also note
that red bean zip executables can be deployed easily to all platforms,
since these native executables work on Linux, Mac, BSD, and Windows.
- Address sanitizer now works very well
