If your main module has this declaration:
STATIC_YOINK("vga_console");
Then a VGA driver will be linked into your executable which
displays your stdio characters on the PC display, whereas
before we could only use the serial port. Your display is an
ANSI terminal and it's still a work in progress.
OpenBSD's qsort() function is more secure than the ones used by
FreeBSD, NetBSD and MacOS. The best part is it goes faster too!
This change also imports the OpenBSD mergesort() and heapsort()
It now works most excellently across all supported operating
sytsems (earlier it didn't work on NT and XNU). Demo code is
available in examples/clock.c and this change also adds some
of the newer ANSI C time functions like timespec_get(), plus
timespec_getres() which hasn't even come out yet as it's C23
pthread_mutex_lock() now uses a better algorithm which goes much faster
in multithreaded environments that have lock contention. This comes at
the cost of adding some fixed-cost overhead to mutex invocations. That
doesn't matter for Cosmopolitan because our core libraries all encode
locking operations as NOP instructions when in single-threaded mode.
Overhead only applies starting the moment you first call clone().
This is the same as `unreachable` except it always traps violations,
even if we're not running in MODE=dbg. This is useful for impossible
conditions relating to system calls. It avoids terrifying bugs where
control falls through to an unrelated function.
This change fixes a nasty bug where SIG_IGN and SIG_DFL weren't working
as advertised on BSDs. This change also fixes the tkill() definition on
MacOS so it maps to __pthread_kill().
This change restores the .symtab symbol table files in our flagship
programs (e.g. redbean.com, python.com) needed to show backtraces. This
also rolls back earlier changes to zip.com w.r.t. temp directories since
the right way to do it turned out to be the -b DIR flag.
This change also improves the performance of zip.com. It turned out
mmap() wasn't being used, because zip.com was assuming a 4096-byte
granularity, but cosmo requires 65536. There was also a chance to speed
up stdio scanning using the unlocked functions.
Rosetta does something strange to the signal handling registers but
setting SA_SIGINFO prevents the issue from happening. Set the flag
on XNU to work around the issue.
- Polyfill pselect() on Windows
- Add -O NOFILE flag to pledge.com
- Polyfill ppoll() on NetBSD, XNU, and Windows
- Support negative numbers and errno in sizetol()
- Add .RSS, .NOFILE, and .MAXCORE to Landlock Make
- Fix issue with .PLEDGE preventing touching of output files
- Add __watch() function (like ftrace) for logging memory changes
We now guarantee TMPDIR will be defined on a per build rule basis. It'll
be an absolute path. It'll be secure and unique. It'll be rm -rf'd after
the last shell script line in your build rule is executed. If $TMPDIR is
already defined, then it'll be created as a subdirectory of your $TMPDIR
and then replace the variable with the new definition. The Landlock Make
repository will be updated with examples shortly after this change which
shall be known as Landlock Make 1.1.1.
See #530
It turned out that specifying all SRCS and INCS as dependencies on the
pattern rules for all headers, caused `make` memory usage to skyrocket
from 40mb ot 160mb. This change also reduces the build graph another 4%.
This change introduces the nointernet() function which may be called to
prevent a process and its descendants from communicating with publicly
routable Internet addresses. GNU Make has been modified to always call
this function. In the future Landlock Make will have a way to whitelist
subnets to override this behavior, or disable it entirely. Support is
available for Linux only. Our firewall does not require root access.
Calling nointernet() will return control to the caller inside a new
process that has a SECCOMP BPF filter installed, which traps network
related system calls. Your original process then becomes a permanent
ptrace() supervisor that monitors all processes and threads descending
from the returned child. Whenever a networking system call happens the
kernel will stop the process and wakes up the monitor, which then peeks
into the child memory to read the sockaddr_in to determine if it's ok.
The downside to doing this is that there can be only one supervisor at a
time using ptrace() on a process. So this firewall won't be enabled if
you run make under strace or inside gdb. It also makes testing tricky.
The earlier iterations did too much guesswork when it came to things
like stderr logging and syscall origin verification. This change will
make things more conformant to existing practices. The __pledge_mode
extension now can be configured in a better way.
There's also a new `-q` flag added to pledge.com, e.g.
o//tool/build/pledge.com -qv. ls
Is a good way to disable warnings about `tty` access attempts.
- 10.5% reduction of o//depend dependency graph
- 8.8% reduction in latency of make command
- Fix issue with temporary file cleanup
There's a new -w option in compile.com that turns off the recent
Landlock output path workaround for "good commands" which do not
unlink() the output file like GNU tooling does.
Our new GNU Make unveil sandboxing appears to have zero overhead
in the grand scheme of things. Full builds are pretty fast since
the only thing that's actually slowed us down is probably libcxx
make -j16 MODE=rel
RL: took 85,732,063µs wall time
RL: ballooned to 323,612kb in size
RL: needed 828,560,521µs cpu (11% kernel)
RL: caused 39,080,670 page faults (99% memcpy)
RL: 350,073 context switches (72% consensual)
RL: performed 0 reads and 11,494,960 write i/o operations
pledge() and unveil() no longer consider ENOSYS to be an error.
These functions have also been added to Python's cosmo module.
This change also removes some WIN32 APIs and System Five magnums
which we're not using and it's doubtful anyone else would be too
We're now able to drop both `exec` and `prot_exec` privileges
automatically when launching glibc dynamic executables. We also have
really outstanding standard error logging now, that explains which
promises are needed, even in cases where `exec` is used.
- We now kill the program on violations like OpenBSD
- We now print a message explaining which promise is needed
- This change also fixes a linkage bug with thread local storage
- Your sigaction() handlers should now be more thread safe
A new `__pledge_mode` global has been introduced to make pledge() more
customizable on Linux. For example:
__attribute__((__constructor__)) static void init(void) {
__pledge_mode = SECCOMP_RET_ERRNO | EPERM;
}
Can be used to restore our old permissive pledge() behavior.
- Make memmem() faster
- Make readdir() thread safe
- Remove 64kb limit from mkdeps.com
- Add old crypt() function from Musl
- Improve new fix-third-party.py tool
- Improve libc/isystem/ headers and fix bugs
The whole repository is now buildable with GNU Make Landlock sandboxing.
This proves that no Makefile targets exist which touch files other than
their declared prerequisites. In order to do this, we had to:
1. Stop code morphing GCC output in package.com and instead run a
newly introduced FIXUPOBJ.COM command after GCC invocations.
2. Disable all the crumby Python unit tests that do things like create
files in the current directory, or rename() files between folders.
This ended up being a lot of tests, but most of them are still ok.
3. Introduce an .UNSANDBOXED variable to GNU Make to disable Landlock.
We currently only do this for things like `make tags`.
4. This change deletes some GNU Make code that was preventing the
execve() optimization from working. This means it should no longer
be necessary in most cases for command invocations to be indirected
through the cocmd interpreter.
5. Missing dependencies had to be declared in certain places, in cases
where they couldn't be automatically determined by MKDEPS.COM
6. The libcxx header situation has finally been tamed. One of the
things that makes this difficult is MKDEPS.COM only wants to
consider the first 64kb of a file, in order to go fast. But libcxx
likes to have #include lines buried after huge documentation.
7. An .UNVEIL variable has been introduced to GNU Make just in case
we ever wish to explicitly specify additional things that need to
be whitelisted which aren't strictly prerequisites. This works in
a manner similar to the recently introduced .EXTRA_PREREQS feature.
There's now a new build/bootstrap/make.com prebuilt binary available. It
should no longer be possible to write invalid Makefile code.
This change also fixes a bug with gettid() being incorrect after fork().
We now implement the ENOENT behavior for getauxval(). The getuid() etc.
system calls are now faster too. Plus issetugid() will work on BSDs.
This change addresses review comments from Günther Noack on GitHub.
We're now blacklisting truncate() and setxattr() since Landlock lets
them operate on veiled files. The restriction has been lifted on using
unveil() multiple times, since Landlock does that well.
- Fix getpriority()
- Add AT_MINSIGSTKSZ
- Fix bugs in BPF code
- Show more stuff in printargs.com
- Write manual test for pledge.com
- pledge() now generates tinier BPF code
- Have pledge("exec") only enable execve()
- Fix pledge.com chroot setuid functionality
- Improve pledge.com unveiling of ape loader
This change fixes bugs, adds more system calls, and improves
compatibility with OpenBSD. Going forward, versions on the web will be
pinned to a permanent version. There were many other changes over the
last week which also improved this new release.
- Introduce path module to redbean
- Fix glitch with linenoise printing extra line on eof
- Introduce closefrom() and close_range() system calls
- Make file descriptor closing more secure in pledge.com
This change reconciles our pledge() implementation with the OpenBSD
kernel source code. We now a polyfill that's much closer to OpenBSD's
behavior. For example, it was discovered that "stdio" permits threads.
There were a bunch of Linux system calls that needed to be added, like
sched_yield(). The exec / execnative category division is now dropped.
We're instead using OpenBSD's "prot_exec" promise for launching APE
binaries and dynamic shared objects. We also now filter clone() flags.
The pledge.com command has been greatly improved. It now does unveiling
by default when Landlock is available. It's now smart enough to unveil a
superset of paths that OpenBSD automatically unveils with pledge(), such
as /etc/localtime. pledge.com also now checks if the executable being
launched is a dynamic shared object, in which case it unveils libraries.
These changes now make it possible to pledge curl on ubuntu 20.04 glibc:
pledge.com -p 'stdio rpath prot_exec inet dns tty sendfd recvfd' \
curl -s https://justine.lol/hello.txt
Here's what pledging curl on Alpine 3.16 with Musl Libc looks like:
pledge.com -p 'stdio rpath prot_exec dns inet' \
curl -s https://justine.lol/hello.txt
Here's what pledging curl.com w/ ape loader looks like:
pledge.com -p 'stdio rpath prot_exec dns inet' \
o//examples/curl.com https://justine.lol/hello.txt
The most secure sandbox, is curl.com converted to static ELF:
o//tool/build/assimilate.com o//examples/curl.com
pledge.com -p 'stdio rpath dns inet' \
o//examples/curl.com https://justine.lol/hello.txt
A weird corner case needed to be handled when resolving symbolic links
during the unveiling process, that's arguably a Landlock bug. It's not
surprising since Musl and Glibc are also inconsistent here too.
We had previously not enabled TLS in MODE=tiny in order to keep the
smallest example programs (e.g. life.com) just 16kb in size. But it
was error prone doing that, so now we just always enable it because
this change uses hacks to ensure it won't increase life.com's size.
This change also fixes a bug on NetBSD, where signal handlers would
break thread local storage if SA_SIGINFO was being used. This looks
like it might be a bug in NetBSD, but it's got a simple workaround.
The pledge.com command now supports the new [WIP] unveil() support. For
example, to strongly sandbox our command for listing directories.
o//tool/build/assimilate.com o//examples/ls.com
pledge.com -v /etc -p 'stdio rpath' o//examples/ls.com /etc
This file system sandboxing is going to be perfect for us, because APE
binaries are self-contained static executables that really don't use the
filesystem that much. On the other hand, with non-static executables,
sandboxing is going to be more difficult. For example, here's how to
sandbox the `ls` command on the latest Alpine:
pledge.com -v rx:/lib -v /usr/lib -v /etc -p 'stdio rpath exec' ls /etc
This change fixes the `execpromises` API with pledge().
This change also adds unix.unveil() to redbean.
Fixes#494
This change simplifies the thread-local storage support code. On Windows
and Mac OS X the startup latency of __enable_tls() has been reduced from
30ms to 1ms. On Windows, TLS memory accesses will now go much faster due
to better self-modifying code that prevents a function call and acquires
our thread information block pointer in a single instruction.
We now rewrite the binary image at runtime on Windows and XNU to change
mov %fs:0,%reg instructions to use %gs instead. There's also simpler
threading API introduced by this change and it's called _spawn() and
_join(), which has replaced most clone() usage.
- Wrap clock_getres()
- Wrap sched_setscheduler()
- Make sleep() api conformant
- Polyfill sleep() using select()
- Improve clock_gettime() polyfill
- Make nanosleep() POSIX conformant
- Slightly improve some DNS functions
- Further strengthen pledge() sandboxing
- Improve rounding of timeval / timespec
- Allow layering of pledge() calls on Linux
- Polyfill sched_yield() using select() on XNU
- Delete more system constants we probably don't need
- Introduce __assert_disable global
- Improve strsignal() thread safety
- Make system call tracing thread safe
- Fix SO_RCVTIMEO / SO_SNDTIMEO on Windows
- Refactor DescribeFoo() functions into one place
- Fix fork() on Windows when TLS and MAP_STACK exist
- Round upwards in setsockopt(SO_RCVTIMEO) on Windows
- Disable futexes on OpenBSD which seem extremely broken
- Implement a better kludge for monotonic time on Windows
This will help make it easier to troubleshoot ABI breakages with on
operating systems that, unlike Linux don't have ironclad guarantees
to not break userspace.
This change makes pthread_mutex_lock() as fast as _spinlock() by
default. Thread instability issues on NetBSD have been resolved.
Improvements made to gdtoa thread code. Crash reporting will now
synchronize between threads in a slightly better way.
This change hardens the code for opening /zip/ files using the system
call interface. Thread safety and signal safety has been improved for
file descriptors in general. We now document fixed addresses that are
needed for low level allocations.
- Fix Makefile flaking due to ZIPOBJ_FLAGS generation
- Make printf() floating point and gdtoa thread safe
- Polish up the runit / runitd programs some more
- Prune some more makefile dependencies
Calls to lock/unlock functions are now NOPs by default. The first time
clone() is called, they get turned into CALL instructions. Doing this
caused funcctions like fputc() to shrink from 85 bytes to 45+4 bytes.
Since the ANSI solution of `(__threaded && lock())` inlines os much
superfluous binary content into functions all over the place.
- Finish cleaning up the stdio unlocked APIs
- Make __cxa_finalize() properly thread safe
- Don't log locks if threads aren't being used
- Add some more mutex guards to places using _mmi
- Specific lock names now appear in the --ftrace logs
- Fix mkdeps.com generating invalid Makefiles sometimes
- Simplify and fix bugs in the test runner infrastructure
- Fix issue where sometimes some functions wouldn't be logged
These releases are really exciting since they contained the patches we
worked to get upstreamed. It means that their /bin/sh interpreters all
work fine with Actually Portable Executable now.
This change switches most of the core locks to be re-entrant, in order
to reduce the chance of deadlocking code that does, clever things with
asynchronous signal handlers. This change implements it it in pthreads
so we're one step closer to having a standardized threading primitives
This change ensures we do a better job translating /c/foo.bar paths into
c:/foo.bar paths on Windows when generating the CreateProcess() cmd line
thus fixing a regression that happened in the last two months when using
the help() feature of Actually Portable Python in the CMD.EXE shell.
This change turns symbol table compression back on using Puff, which
noticeably reduces the size of programs like redbean and Python. The
redbean web server receives some minor API additions for controlling
things like SSL in addition to filling gaps in the documentation.
- Write tests for cthreads
- Fix bugs in pe2.com tool
- Fix ASAN issue with GetDosEnviron()
- Consolidate the cthread header files
- Some code size optimizations for MODE=
- Attempted to squash a tls linker warning
- Attempted to get futexes working on FreeBSD
- Document redbean's argon2 module
- Fix regressions in cthreads library
- Make testlib work better with threads
- Give the cthreads library lots of love
- Remove some of the stdio assembly code
- Implement getloadavg() across platforms
- Code size optimizations for errnos, etc.
- Only check for signals in main thread on Windows
- Make errnos for dup2 / dup3 consistent with posix
This change also fixes a bug in the argon2 module, where the NUL
terminator was being included in the hash encoded ascii string. This
shouldn't require any database migrations to folks who found this module
and productionized it, since the argon2 library treats it as a c string.
- Fix some minor issues in ar.com
- Have execve() look for `ape` command
- Rewrite NT paths using /c/ rather /??/c:/
- Replace broken GCC symlinks with .sym files
- Rewrite $PATH environment variables on startup
- Make $(APE_NO_MODIFY_SELF) the default bootloader
- Add all build command dependencies to build/bootstrap
- Get the repository mostly building from source on non-Linux
- Implement openpty()
- Add `--assimilate` flag to APE bootloader
- Restore Linux vDSO clock_gettime() support
- Use `$(APE_NO_MODIFY_SELF)` on more programs
- Add FreeBSD-specific mmap() flags
- Reduce size of the APE loader from 8kb to 4kb
- Work towards fixing the Makefile build on WSL
- Automate testing of APE no-modify-self behaviors
- Make the ape.S shell script code cleaner and tinier
- Improve the APE sanity check to test behavior better
- Fixed issue with ShowCrashReports() sigaltstack() on BSDs
- Delete symbols for S_MODE magnums which wasted compile time
If you checked out yesterday's APE commit, please run:
rm -f /usr/bin/ape o/tmp/ape /tmp/ape "${TMPDIR:-/tmp}/ape"
Because this change fixes certain aspects of the new ABI. We don't have
automated migrations for APE loader versions yet. Thanks! You can also
download prebuilt binaries here:
- https://justine.lol/ape.elf (Linux/FreeBSD/NetBSD/OpenBSD)
- https://justine.lol/ape.macho (Apple)
Install the appropriate one as `/usr/bin/ape`.
The "no modify self" variant of Actually Portable Executable is now
supported on all platforms. If you use `$(APE_NO_MODIFY_SELF)` then
ld.bfd will embed a 4096 byte ELF binary and a 4096 byte Macho file
which are installed on the fly to ${TMPDIR:-/tmp}, which enables us
launch the executable, without needing to copy the whole executable
To prevent it from copying a tiny executable to your temp directory
you need to install the `ape` command (renamed from ape-loader), to
a system path. For example:
# FreeBSD / NetBSD / OpenBSD
make -j8 o//ape/ape
cp o//ape/ape /usr/bin/ape
# Mac OS
# make -j8 o//ape/ape.macho
curl https://justine.lol/ape.macho >/usr/bin/ape
chmod +x /usr/bin/ape
On Linux you can get even more performance with the new binfmt_misc
support which makes launching non-modifying APE binaries as fast as
launching ELF executables. Running the following command:
# Linux
ape/apeinstall.sh
Will copy APE loader to /usr/bin/ape and register with binfmt_misc
Lastly, this change also fixes a really interesting race condition
with OpenBSD thread joining.
The greenbean web server now works nearly perfectly on Windows with over
1000 threads. But some synchronization issues still remain which prevent
us from going over nine thousand.
- Document more compiler flags
- Expose new __print_maps() api
- Better overflow checking in mmap()
- Improve the shell example somewhat
- Fix minor runtime bugs regarding stacks
- Make kill() on fork()+execve()'d children work
- Support CLONE_CHILD_CLEARTID for proper joining
- Fix recent possible deadlock regression with --ftrace
- add vdso dump utility
- tests now log stack usage
- rename g_ftrace to __ftrace
- make internal spinlocks go faster
- add conformant c11 atomics library
- function tracing now logs stack usage
- make function call tracing thread safe
- add -X unsecure (no ssl) mode to redbean
- munmap() has more consistent behavior now
- pacify fsync() calls on python unit tests
- make --strace flag work better in redbean
- start minimizing and documenting compiler flags
Windows support for this example is still a work in progress. It's
encountering some unusual crashes. Thank you Chris Wellons for the cool
synchronization code too!
This change introduces a `-W /dev/pts/1` flag to redbean. What it does
is use the mincore() system call to create a dual-screen terminal
display that lets you troubleshoot the virtual address space. This is
useful since page faults are an important thing to consider when using a
forking web server. Now we have a colorful visualization of which pages
are going to fault and which ones are resident in memory.
The memory monitor, if enabled, spawns as a thread that just outputs
ANSI codes to the second terminal in a loop. In order to make this
happen using the new clone() polyfill, stdio is now thread safe.
This change also introduces some new demo pages to redbean. It also
polishes the demos we already have, to look a bit nicer and more
presentable for the upcoming release, with better explanations too.
- Get threads working on NetBSD
- Get threads working on OpenBSD
- Fix Emacs config for Emacs v28
- Improve --strace logging of sigset_t
- Improve --strace logging of struct stat
- Improve memory safety of DescribeThing functions
- Refactor auto stack allocation into LIBC_RUNTIME
- Introduce shell.com example which works on Windows
- Refactor __strace_thing into DescribeThing functions
- Document the CHECK macros and improve them in NDEBUG mode
- Rewrite MAP_STACK so it uses FreeBSD behavior across platforms
- Deprecate and discourage the use of MAP_GROWSDOWN (it's weird)
- Add rusage to redbean Lua API
- Add more redbean documentation
- Add pledge() to redbean Lua API
- Polyfill OpenBSD pledge() for Linux
- Increase PATH_MAX limit to 1024 characters
- Untrack sibling processes after fork() on Windows
- Add hierarchical auto-completion to redbean's repl
- Fetch latest localtime() and strftime() from Eggert
- Shave a few milliseconds off redbean start latency
- Fix redbean repl with multi-line statements
- Make the Lua unix module code more elegant
- Harden Lua data structure serialization
- Add GetCpuCount() API to redbean
- Add unix.gmtime() API to redbean
- Add unix.readlink() API to redbean
- Add unix.localtime() API to redbean
- Perfect the new redbean UNIX module APIs
- Integrate with Linux clock_gettime() vDSO
- Run Lua garbage collector when malloc() fails
- Fix another regression quirk with linenoise repl
- Fix GetProgramExecutableName() for systemwide installs
- Fix a build flake with test/libc/mem/test.mk SRCS list
- Improve serialization
- Add Benchmark() API to redbean
- Refactor UNIX API to be assert() friendly
- Make the redbean Lua REPL print data structures
- Fix recent regressions in linenoise reverse search
- Add -i flag so redbean can be a language interpreter
- Expand redbean UNIX module
- Expand redbean documentation
- Ensure Lua copyright is embedded in binary
- Increase the PATH_MAX limit especially on NT
- Use column major sorting for linenoise completions
- Fix some suboptimalities in redbean's new UNIX API
- Figured out right flags for Multics newline in raw mode
- Get clone() working on FreeBSD
- Increase some Python build quotas
- Add more atomic builtins to chibicc
- Fix ASAN poisoning of alloca() memory
- Make MODE= mandatory link path tinier
- Improve the examples folder a little bit
- Start working on some more resource limits
- Make the linenoise auto-complete UI as good as GNU readline
- Update compile.com, avoiding AVX codegen on non-AVX systems
- Make sure empty path to syscalls like opendir raises ENOENT
- Correctly polyfill ENOENT vs. ENOTDIR on the New Technology
- Port bestline's paredit features to //third_party/linenoise
- Remove workarounds for RHEL 5.0 bugs that were fixed in 5.1
It's now possible to pass the `-S` or `-SS` flags to sandbox redbean
worker proecsses after they've been forked. The first `-S` flag is
intended to be a permissive builtin policy that limits system calls to
only that which the various parts of redbean serving need. The second
`-SS` flag is intended to be more restrictive, preventing things like
the Lua extensions you download off the web from using the HTTP client
or sockets APIs. In upcoming changes you'll be able to implement your
own Berkeley Packet Filter sandbox programs and load them via Lua.
- Fix a regression with the previous change that broke redbean
- Add chroot(), resource limit, seccomp, and other stuff to redbean
- Write lots and lots of documentation
- Iron out more system call issues
You can now interact with the global web server state on the command
line, which the web server is running. This supports Emacs shortcuts
with history, readline parity, <tab> completions, plus hints. Enjoy!
This change makes further effort towards improving our poll()
implementation on the New Technology. The stdin worker didn't work out
so well for Python so it's not being used for now. System call tracing
with the --strace flag should now be less noisy now on Windows unless
you modify the strace.internal.h defines to turn on some optional ones
that are most useful for debugging the system call wrappers.
- Fix bugs in kDos2Errno definition
- malloc() should now be thread safe
- Fix bug in rollup.com header generator
- Fix open(O_APPEND) on the New Technology
- Fix select() on the New Technology and test it
- Work towards refactoring i/o for thread safety
- Socket reads and writes on NT now poll for signals
- Work towards i/o completion ports on the New Technology
- Make read() and write() intermittently check for signals
- Blinkenlights keyboard i/o so much better on NT w/ poll()
- You can now poll() files and sockets at the same time on NT
- Fix bug in appendr() that manifests with dlmalloc footers off
You can now call functions like fork() from Lua and it'll work across
all supported platforms, including Windows. This gives you a level of
control of the system that Lua traditionally hasn't been able to have
due to its focus on old portable stdio rather modern POSIX APIs. Demo
code has been added to redbean-demo.com to show how it works.
This change also modifies Lua so that integer literals with a leading
zero will be interpreted as octal. That should help avoid shooting in
the foot with POSIX APIs that frequently use octal mode bits.
This change fixes a bug in opendir(".") on New Technology.
Lastly, redbean will now serve crash reports to private network IPs.
This is consistent with other frameworks. However that isn't served
to public IPs unless the -E flag is passed to redbean at startup.
- Document sigaction()
- Simplify New Technology fork() code
- Testing and many bug fixes for mprotect()
- Distribute Intel Xed ILD in the amalgamation
- Turn Xed enums into defines to avoid DWARF bloat
- Improve polyfilling of SA_SIGINFO on BSDs and fix bugs
- setpgid(getpid(), getpid()) on Windows will ignore CTRL-C
- Work around issues relating to NT mappings being executable
- Permit automatic executable stack override via `ape_stack_pf`
- Introduce fast spinlock API
- Double rand64() perf w/ spinlock
- Improve raise() on New Technology
- Support gettid() across platforms
- Implement SA_NODEFER on New Technology
- Move the lock intrinsics into LIBC_INTRIN
- Make SIGTRAP recoverable on New Technology
- Block SIGCHLD in wait4() on New Technology
- Add threading prototypes for XNU and FreeBSD
- Rewrite abort() fixing its minor bugs on XNU/NT
- Shave down a lot of the content in libc/bits/bits.h
- Let signal handlers modify CPU registers on New Technology
- Improve i/o perf on New Technology
- Code cleanup on read() for New Technology
- Fix bad bug with dup() of socket on New Technology
- Clean up some more strace errors on New Technology
- Fix sigsuspend() on XNU
- Fix strsignal() on non-Linux
- Add unit tests for strsignal()
- Add unit tests for setitimer()
- Add unit tests for sigsuspend()
- Rewrite setitimer() for New Technology
- Rewrite nanosleep() for New Technology
- Polyfill SIGALRM on the New Technology
- select(0,0,0,0) on NT now calls pause()
- Remove some NTDLL calls that aren't needed
- Polyfill SA_NOCLDWAIT on the New Technology
- Polyfill SA_RESETHAND on the New Technology
- Polyfill sigprocmask() on the New Technology
- Polyfill SIGCHLD+SIG_IGN on the New Technology
- Polyfill SA_RESTART masking on the New Technology
- Deliver console signals from main thread on New Technology
- Document SA_RESTART behavior w/ @sarestartable / @norestart
- System call trace in MODE=dbg now prints inherited FDs and signal mask
- Update a couple unicode data files
- Disable strace during logger calls
- SQLite now uses pread() / pwrite()
- pread() past EOF on NT now returns 0
- Make the NT mmap() and fork() code elegant
- Give NT a big performance boost with memory
- Add many more mmap() tests to prove it works
This change fixes minor bugs and adds a feature, which lets us store the
ELF symbol table, inside the ZIP directory. We use the path /zip/.symtab
which can be safely removed using a zip editing tool, to make the binary
smaller after compilation. This supplements the existing method of using
a separate .com.dbg file, which is still supported. The intent is people
don't always know that it's a good idea to download the debug file. It's
not great having someone's first experience be a crash report, that only
has numbers rather than symbols. This will help fix that!
redbean will now cleanup child processes properly. New accounting
information is available too, such as page faults and memory usage. The
way it works is Cosmopolitan Libc samples the process collection on
entry into read() and poll() to see if SIGCHLD needs to be raised.
This change also fixes an issue with chibicc /tmp cleanup. There was
also a regression in MODE=dbg because STL needed ASAN runtime support.
You can now use psapi.dll and pdh.dll. Some TODOs for Windows have been
cleared out. We might have a working load average for the platform that
should help GNU Make work well.
You can now use the hardest fastest and most dangerous language there is
with Cosmopolitan. So far about 75% of LLVM libcxx has been added. A few
breaking changes needed to be made to help this go smoothly.
- Rename nothrow to dontthrow
- Rename nodiscard to dontdiscard
- Add some libm functions, e.g. lgamma, nan, etc.
- Change intmax_t from int128 to int64 like everything else
- Introduce %jjd formatting directive for int128_t
- Introduce strtoi128(), strtou128(), etc.
- Rename bsrmax() to bsr128()
Some of the templates that should be working currently are std::vector,
std::string, std::map, std::set, std::deque, etc.
Continuous Integration (via runit and runitd) is now re-enabled on win7
and win10. The `make test` command, which runs the tests on all systems
is now the fastest and most stable it's been since the project started.
UBSAN is now enabled in MODE=dbg in addition to ASAN. Many instances of
undefined behavior have been removed. Mostly things like passing a NULL
argument to memcpy(), which works fine with Cosmopolitan Libc, but that
doesn't prevents the compiler from being unhappy. There was an issue w/
GNU make where static analysis claims a sprintf() call can overflow. We
also now have nicer looking crash reports on Windows since uname should
now be supported and msys64 addr2line works reliably.
Now that we have understandable system call tracing on Windows, this
change rewrites many of the polyfill internals for that platform, to
help things get closer to tip top shape. Support for complex forking
scenarios had been in a regressed state for quite some time. Now, it
works! Subsequent changes should be able to address the performance.
- Simulate SIGPIPE on Windows NT
- Fix commandv() regression on Windows NT
- Fix sigprocmask() strace bug on OpenBSD
- Add many more system calls to --strace logging
- Make errno state more pristine in redbean strace
This is similar to the --ftrace (c function call trace) flag, except
it's less noisy since it only logs system calls to stderr. Having this
flag is valuable because (1) system call tracing tells us a lot about
the behavior of complex programs and (2) it's usually very hard to get
system call tracing on various operating systems, e.g. strace, ktrace,
dtruss, truss, nttrace, etc. Especially on Apple platforms where even
with the special boot trick, debuggers still aren't guaranteed to work.
make -j8 o//examples
o//examples/hello.com --strace
This is enabled by default in MODE=, MODE=opt, and MODE=dbg. In MODE=dbg
extra information will be printed.
make -j8 MODE=dbg o/dbg/examples
o/dbg/examples/hello.com --strace |& less
This change also changes:
- Rename IsText() → _istext()
- Rename IsUtf8() → _isutf8()
- Fix madvise() on Windows NT
- Fix empty string case of inet_ntop()
- vfork() wrapper now saves and restores errno
- Update xsigaction() to yoink syscall support
- Add Lua backtraces to redbean!
- Wipe serving keys after redbean forks
- Audit redbean to remove free via exit
- Log SSL client ciphersuite preferences
- Increase ASAN malloc() backtrace depth
- Make GetSslRoots() behave as a singleton
- Move leaks.c from LIBC_TESTLIB to LIBC_LOG
- Add undocumented %n to printf() for newlines
- Fix redbean memory leak reindexing inode change
- Fix redbean memory leak with Fetch() DNS object
- Restore original environ after __cxa_finalize()
- Make backtrace always work after __cxa_finalize()
- Introduce COUNTEXPR() diagnostic / benchmark tool
- Fix a few more instances of errno being clobbered
- Consolidate the ANSI color disabling internal APIs
- Fix build flakes
- Polyfill SIGWINCH on Windows
- Fix an execve issue on Windows
- Make strerror show more information
- Improve cmd.exe setup/teardown on Windows
- Support bracketed paste mode in Blinkenlights
- Show keyboard shortcuts in Blinkenlights status bar
- Fixed copy_file_range() and copyfile() w/ zip filesystem
- Size optimize GetDosArgv() to keep life.com 12kb in size
- Improve Blinkenlights ability to load weird ELF executables
- Fix program_executable_name and add GetInterpreterExecutableName
- Make Python in tiny mode fail better if docstrings are requested
- Update Python test exclusions in tiny* modes such as tinylinux
- Add bulletproof unbreakable kprintf() troubleshooting function
- Remove "oldskool" keyword from ape.S for virus scanners
- Fix issue that caused backtraces to not print sometimes
- Improve Blinkenlights serial uart character i/o
- Make clock_gettime() not clobber errno on xnu
- Improve sha256 cpuid check for old computers
- Integrate some bestline linenoise fixes
- Show runit process names better in htop
- Remove SIGPIPE from ShowCrashReports()
- Make realpath() not clobber errno
- Avoid attaching GDB on non-Linux
- Improve img.com example
We defined `noinline` as an abbreviation for the longer version
`__attribute__((__noinline__))` which caused name clashes since
third party codebases often write it as `__attribute__((noinline))`.
This commit makes numerous refinements to cosmopolitan memory handling.
The default stack size has been reduced from 2mb to 128kb. A new macro
is now provided so you can easily reconfigure the stack size to be any
value you want. Work around the breaking change by adding to your main:
STATIC_STACK_SIZE(0x00200000); // 2mb stack
If you're not sure how much stack you need, then you can use:
STATIC_YOINK("stack_usage_logging");
After which you can `sort -nr o/$MODE/stack.log`. Based on the unit test
suite, nothing in the Cosmopolitan repository (except for Python) needs
a stack size greater than 30kb. There are also new macros for detecting
the size and address of the stack at runtime, e.g. GetStackAddr(). We
also now support sigaltstack() so if you want to see nice looking crash
reports whenever a stack overflow happens, you can put this in main():
ShowCrashReports();
Under `make MODE=dbg` and `make MODE=asan` the unit testing framework
will now automatically print backtraces of memory allocations when
things like memory leaks happen. Bugs are now fixed in ASAN global
variable overrun detection. The memtrack and asan runtimes also handle
edge cases now. The new tools helped to identify a few memory leaks,
which are fixed by this change.
This change should fix an issue reported in #288 with ARG_MAX limits.
Fixing this doubled the performance of MKDEPS.COM and AR.COM yet again.
The APE_NO_MODIFY_SELF loader payload has been moved out of the examples
folder and improved so that it works on BSD systems, and permits general
elf program headers. This brings its quality up enough that it should be
acceptable to use by default for many programs, e.g. Python, Lua, SQLite
and Python. It's the responsibility of the user to define an appropriate
TMPDIR if /tmp is considered an adversarial environment. Mac OS shall be
supported by APE_NO_MODIFY_SELF soon.
Fixes and improvements have been made to program_executable_name as it's
now the one true way to get the absolute path of the executing image.
This change fixes a memory leak in linenoise history loading, introduced
by performance optimizations in 51904e2687
This change fixes a longstanding regression with Mach system calls, that
23ae9dfceb back in February which impacted
our sched_yield() implementation, which is why no one noticed until now.
The Blinkenlights PC emulator has been improved. We now fix rendering on
XNU and BSD by not making the assumption that the kernel terminal driver
understands UTF8 since that seems to break its internal modeling of \r\n
which is now being addressed by using \e[𝑦H instead. The paneling is now
more compact in real mode so you won't need to make your font as tiny if
you're only emulating an 8086 program. The CLMUL ISA is now emulated too
This change also makes improvement to time. CLOCK_MONOTONIC now does the
right thing on Windows NT. The nanosecond time module functions added in
Python 3.7 have been backported.
This change doubles the performance of Argon2 password stretching simply
by not using its copy_block and xor_block helper functions, as they were
trivial to inline thus resulting in us needing to iterate over each 1024
byte block four fewer times.
This change makes code size improvements. _PyUnicode_ToNumeric() was 64k
in size and now it's 10k. The CJK codec lookup tables now use lazy delta
zigzag deflate (δzd) encoding which reduces their size from 600k to 200k
plus the code bloat caused by macro abuse in _decimal.c is now addressed
so our fully-loaded statically-linked hermetically-sealed Python virtual
interpreter container is now 9.4 megs in the default build mode and 5.5m
in MODE=tiny which leaves plenty of room for chibicc.
The pydoc web server now accommodates the use case of people who work by
SSH'ing into a different machine w/ python.com -m pydoc -p8080 -h0.0.0.0
Finally Python Capsulae delenda est and won't be supported in the future
- Python static hello world now 1.8mb
- Python static fully loaded now 10mb
- Python HTTPS client now uses MbedTLS
- Python REPL now completes import stmts
- Increase stack size for Python for now
- Begin synthesizing posixpath and ntpath
- Restore Python \N{UNICODE NAME} support
- Restore Python NFKD symbol normalization
- Add optimized code path for Intel SHA-NI
- Get more Python unit tests passing faster
- Get Python help() pagination working on NT
- Python hashlib now supports MbedTLS PBKDF2
- Make memcpy/memmove/memcmp/bcmp/etc. faster
- Add Mersenne Twister and Vigna to LIBC_RAND
- Provide privileged __printf() for error code
- Fix zipos opendir() so that it reports ENOTDIR
- Add basic chmod() implementation for Windows NT
- Add Cosmo's best functions to Python cosmo module
- Pin function trace indent depth to that of caller
- Show memory diagram on invalid access in MODE=dbg
- Differentiate stack overflow on crash in MODE=dbg
- Add stb_truetype and tools for analyzing font files
- Upgrade to UNICODE 13 and reduce its binary footprint
- COMPILE.COM now logs resource usage of build commands
- Start implementing basic poll() support on bare metal
- Set getauxval(AT_EXECFN) to GetModuleFileName() on NT
- Add descriptions to strerror() in non-TINY build modes
- Add COUNTBRANCH() macro to help with micro-optimizations
- Make error / backtrace / asan / memory code more unbreakable
- Add fast perfect C implementation of μ-Law and a-Law audio codecs
- Make strtol() functions consistent with other libc implementations
- Improve Linenoise implementation (see also github.com/jart/bestline)
- COMPILE.COM now suppresses stdout/stderr of successful build commands
This change reinvents all the GNU Readline features I discovered that I
couldn't live without, e.g. UTF-8, CTRL-R search and CTRL-Y yanking. It
now feels just as good in terms of user interface from the subconscious
workflow perspective. It's real nice to finally have an embeddable line
reader that's actually good with a 30 kb footprint and a bsd-2 license.
This change adds a directory to the examples folder, explaining how the
new Python compiler may be used. Some of the bugs with Python binaries
have been addressed but overall it's still a work in progress.
The termios::c_cc field turned out to be incorrectly defined on Linux
due to some confusion between the glibc and kernel definitions. We'll
be using the kernel definition, since it has the strongest consensus.
Fields have been have been added to struct stat for BSD compatibility
such as st_birthtim, plus the GLIBC compatibility of isystem/sys/stat
has been improved.
The ZIP filesystem has a breaking change. You now need to use /zip/ to
open() / opendir() / etc. assets within the ZIP structure of your APE
binary, instead of the previous convention of using zip: or zip! URIs.
This is needed because Python likes to use absolute paths, and having
ZIP paths encoded like URIs simply broke too many things.
Many more system calls have been updated to be able to operate on ZIP
files and file descriptors. In particular fcntl() and ioctl() since
Python would do things like ask if a ZIP file is a terminal and get
confused when the old implementation mistakenly said yes, because the
fastest way to guarantee native file descriptors is to dup(2). This
change also improves the async signal safety of zipos and ensures it
doesn't maintain any open file descriptors beyond that which the user
has opened.
This change makes a lot of progress towards adding magic numbers that
are specific to platforms other than Linux. The philosophy here is that,
if you use an operating system like FreeBSD, then you should be able to
take advantage of FreeBSD exclusive features, even if we don't polyfill
them on other platforms. For example, you can now open() a file with the
O_VERIFY flag. If your program runs on other platforms, then Cosmo will
automatically set O_VERIFY to zero. This lets you safely use it without
the need for #ifdef or ifstatements which detract from readability.
One of the blindspots of the ASAN memory hardening we use to offer Rust
like assurances has always been that memory passed to the kernel via
system calls (e.g. writev) can't be checked automatically since the
kernel wasn't built with MODE=asan. This change makes more progress
ensuring that each system call will verify the soundness of memory
before it's passed to the kernel. The code for doing these checks is
fast, particularly for buffers, where it can verify 64 bytes a cycle.
- Correct O_LOOP definition on NT
- Introduce program_executable_name
- Add ASAN guards to more system calls
- Improve termios compatibility with BSDs
- Fix bug in Windows auxiliary value encoding
- Add BSD and XNU specific errnos and open flags
- Add check to ensure build doesn't talk to internet
Actually Portable Python is now outperforming the Python binaries
that come bundled with Linux distros, at things like HTTP serving.
You can now have a fully featured Python install in just one .com
file that runs on six operating systems and is about 10mb in size.
With tuning, the tiniest is ~1mb. We've got most of the libraries
working, including pysqlite, and the repl now feels very pleasant.
The things you can't do quite yet are: threads and shared objects
but that can happen in the future, if the community falls in love
with this project and wants to see it developed further. Changes:
- Add siginterrupt()
- Add sqlite3 to Python
- Add issymlink() helper
- Make GetZipCdir() faster
- Add tgamma() and finite()
- Add legacy function lutimes()
- Add readlink() and realpath()
- Use heap allocations when appropriate
- Reorganize Python into two-stage build
- Save Lua / Python shell history to dotfile
- Integrate Python Lib embedding into linkage
- Make isregularfile() and isdirectory() go faster
- Make Python shell auto-completion work perfectly
- Make crash reports work better if changed directory
- Fix Python+NT open() / access() flag overflow error
- Disable Python tests relating to \N{LONG NAME} syntax
- Have Python REPL copyright() show all notice embeddings
The biggest technical challenge at the moment is working around
when Python tries to be too clever about filenames.
Thanks to all the refactorings we now have the ability to enforce
reasonable limitations on the amount of resources any individual
compile or test can consume. Those limits are currently:
- `-C 8` seconds of 3.1ghz CPU time
- `-M 256mebibytes` of virtual memory
- `-F 100megabyte` limit on file size
Only one file currently needs to exceed these limits:
o/$(MODE)/third_party/python/Objects/unicodeobject.o: \
QUOTA += -C16 # overrides cpu limit to 16 seconds
This change introduces a new sizetol() function to LIBC_FMT for parsing
byte or bit size strings with Si unit suffixes. Functions like atoi()
have been rewritten too.
Status lines for Emacs and Vim have been added to Python sources so
they'll be easier to edit using Python's preferred coding style.
Some DNS helper functions have been broken up into multiple files. It's
nice to have one function per file whenever possible, since that way we
don't need -ffunction-sections. Another reason it's good to have small
source files, is because the build will be enforcing resource limits on
compilation and testing soon.
This change gets the Python codebase into a state where it conforms to
the conventions of this codebase. It's now possible to include headers
from Python, without worrying about ordering. Python has traditionally
solved that problem by "diamonding" everything in Python.h, but that's
problematic since it means any change to any Python header invalidates
all the build artifacts. Lastly it makes tooling not work. Since it is
hard to explain to Emacs when I press C-c C-h to add an import line it
shouldn't add the header that actually defines the symbol, and instead
do follow the nonstandard Python convention.
Progress has been made on letting Python load source code from the zip
executable structure via the standard C library APIs. System calss now
recognizes zip!FILENAME alternative URIs as equivalent to zip:FILENAME
since Python uses colon as its delimiter.
Some progress has been made on embedding the notice license terms into
the Python object code. This is easier said than done since Python has
an extremely complicated ownership story.
- Some termios APIs have been added
- Implement rewinddir() dirstream API
- GetCpuCount() API added to Cosmopolitan Libc
- More bugs in Cosmopolitan Libc have been fixed
- zipobj.com now has flags for mangling the path
- Fixed bug a priori with sendfile() on certain BSDs
- Polyfill F_DUPFD and F_DUPFD_CLOEXEC across platforms
- FIOCLEX / FIONCLEX now polyfilled for fast O_CLOEXEC changes
- APE now supports a hybrid solution to no-self-modify for builds
- Many BSD-only magnums added, e.g. O_SEARCH, O_SHLOCK, SF_NODISKIO
This change boosts SSL handshake performance from 2,627 to ~10,000 per
second which is the same level of performance as NGINX at establishing
secure connections. That's impressive if we consider that redbean is a
forking frontend application server. This was accomplished by:
1. Enabling either SSL session caching or SSL tickets. We choose to
use tickets since they reduce network round trips too and that's
a more important metric than wrk'ing localhost.
2. Fixing mbedtls_mpi_sub_abs() which is the most frequently called
function. It's called about 12,000 times during an SSL handshake
since it's the basis of most arithmetic operations like addition
and for some strange reason it was designed to make two needless
copies in addition to calling malloc and free. That's now fixed.
3. Improving TLS output buffering during the SSL handshake only, so
that only a single is write and read system call is needed until
blocking on the ping pong.
redbean will now do a better job wiping sensitive memory from a child
process as soon as it's not needed. The nice thing about fork is it's
much faster than reverse proxying so the goal is to use the different
address spaces along with setuid() to minimize the risk that a server
key will be compromised in the event that application code is hacked.
- Use nullness checks when calling weakly linked functions.
- Avoid typedef for reasons described in Linux Kernel style guide.
- Avoid enum in in Windows headers. Earlier in Cosmo's history all one
hundred files in libc/nt/enum/ used to be enums and it resulted in
gigabytes of DWARF data almost as large as everything else in the
codebase combined.
- Bitfields aren't our friends. They have frequent ABI breakages,
inconsistent arithmetic across compilers, and different endianness
between cpus. Compiler authors also haven't invested much roi into
making bit fields go fast so they produce poor assembly.
- Use memccpy() instead of strncpy() or snprintf() for length-bounded
copying of C strings. strncpy() is a misunderstood function and
snprintf() is awesome but memccpy() deserves more love.
Your redbean can now interoperate with clients that require TLS crypto.
This is accomplished using a protocol polyglot that lets us distinguish
between HTTP and HTTPS regardless of the port number. Certificates will
be generated automatically, if none are supplied by the user. Footprint
increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb
- Add lseek() polyfills for ZIP executable
- Automatically polyfill /tmp/FOO paths on NT
- Fix readdir() / ftw() / nftw() bugs on Windows
- Introduce -B flag for slower SSL that's stronger
- Remove mbedtls features Cosmopolitan doesn't need
- Have base64 decoder support the uri-safe alternative
- Remove Truncated HMAC because it's forbidden by the IETF
- Add all the mbedtls test suites and make them go 3x faster
- Support opendir() / readdir() / closedir() on ZIP executable
- Use Everest for ECDHE-ECDSA because it's so good it's so good
- Add tinier implementation of sha1 since it's not worth the rom
- Add chi-square monte-carlo mean correlation tests for getrandom()
- Source entropy on Windows from the proper interface everyone uses
We're continuing to outperform NGINX and other servers on raw message
throughput. Using SSL means that instead of 1,000,000 qps you can get
around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL
handshakes, since redbean can do 2,627 per second and NGINX does 4.3k
Right now, the SSL UX story works best if you give your redbean a key
signing key since that can be easily generated by openssl using a one
liner then redbean will do all the things that are impossibly hard to
do like signing ecdsa and rsa certificates that'll work in chrome. We
should integrate the let's encrypt acme protocol in the future.
Live Demo: https://redbean.justine.lol/
Root Cert: https://redbean.justine.lol/redbean1.crt
- SIOCGIFCONFIG: reads and enumerate all the network interfaces
- SIOCGIFADDR: reads network address for a given interface
- SIOCGIFFLAGS: reads network flags for a given interface
- SIOCGIFNETMASK: reads network netmask for a given interface
- SIOCGIFBRDADDR: reads network broadcast address for a given interface
- SIOCGIFDSTADDR: reads peer destination address for a given
interface (not supported for Windows)
This change defines Linux ABI structs for the above interfaces and adds
polyfills to ensure they behave consistently on XNU and Windows.
This change gets redbean SQLite working in write mode on Windows.
Warnings have been added to the appropriate and responsible places.
Hacking proprietary PC systems into production-worthy servers isn't
terribly high on the list of priorities. Consider BSD or Linux when
building online systems that service requests from multiple people.
Fixes#193
- Better UBSAN error messages
- POSIX Advisory Locks polyfills
- Move redbean manual to /.help.txt
- System call memory safety in ASAN mode
- Character classification now does UNICODE
redbean improvements:
- Explicitly disable corking
- Simulate Python regex API for Lua
- Send warmup requests in main process on startup
- Add Class-A granular IPv4 network classification
- Add /statusz page so you can monitor your redbean's health
- Fix regressions on OpenBSD/NetBSD caused by recent changes
- Plug Authorization header into Lua GetUser and GetPass APIs
- Recognize X-Forwarded-{For,Host} from local reverse proxies
- Add many additional functions to redbean Lua server page API
- Report resource usage of child processes on `/` listing page
- Introduce `-a` flag for logging child process resource usage
- Introduce `-t MILLIS` flag and `ProgramTimeout(ms)` init API
- Introduce `-H "Header: value"` flag and `ProgramHeader(k,v)` API
Cosmopolitan Libc improvements:
- Make strerror() simpler
- Make inet_pton() not depend on sscanf()
- Fix OpenExecutable() which broke .data section earlier
- Fix stdio in cases where it overflows kernel tty buffer
- Fix bugs in crash reporting w/o .com.dbg binary present
- Add polyfills for SO_LINGER, SO_RCVTIMEO, and SO_SNDTIMEO
- Polyfill TCP_CORK on BSD and XNU using TCP_NOPUSH magnums
New netcat clone in examples/nc.c:
While testing some of the failure conditions for redbean, I noticed that
BusyBox's `nc` command is pretty busted, if you use it as an interactive
tool, rather than having it be part of a pipeline. Unfortunately this'll
only work on UNIX since Windows doesn't let us poll on stdio and sockets
at the same time because I don't think they want tools like this running
on their platform. So if you want forbidden fruit, it's here so enjoy it
- POSIX regular expressions for Lua
- Improved protocol parsing and encoding
- Additional APIs for ZIP storage retrieval
- Fix st_mode issue on NT for regular files
- Generalized APIs for URL and Host handling
- Worked out the kinks in resource resolution
- Allow for custom error pages like /404.html
The most exciting improvement is dynamic pages will soon be able to use
the executable itself as an object store. it required a heroic technique
for overcoming ETXTBSY restrictions which lets us open the executable in
read/write mode, which means (1) wa can restore the APE header, and (2)
we can potentially containerize redbean extension code so that modules
you download for your redbean online will only impact your redbean.
Here's a list of breaking changes to redbean:
- Remove /tool/net/ prefix from magic ZIP paths
- GetHeader() now returns NIL if header is absent
Here's a list of fixes and enhancements to redbean:
- Support 64-bit ZIP archives
- Record User-Agent header in logs
- Add twelve error handlers to accept()
- Display octal st_mode on listing page
- Show ZIP file comments on listing page
- Restore APE MZ header on redbean startup
- Track request count on redbean index page
- Report server uptime on redbean index page
- Don't bind server socket using SO_REUSEPORT
- Fix#151 where Lua LoadAsset() could free twice
- Report rusage accounting when workers exit w/ -vv
- Use ZIP iattr field as text/plain vs. binary hint
- Add ParseUrl() API for parsing things like a.href
- Add ParseParams() API for parsing HTTP POST bodies
- Add IsAcceptablePath() API for checking dots, etc.
- Add IsValidHttpToken() API for validating sane ASCII
- Add IsAcceptableHostPort() for validating HOST[:PORT]
- Send 400 response to HTTP/1.1 requests without a Host
- Send 403 response if ZIP or file isn't other readable
- Add virtual hosting that tries prepending Host to path
- Route requests based on Host in Request-URI if present
- Host routing will attempt to remove or add the www. prefix
- Sign-extend UNIX timestamps and don't adjust FileTime zone
Here's some of the improvements made to Cosmopolitan Libc:
- Fix ape.S indentation
- Improve consts.sh magnums
- Write pretty good URL parser
- Improve rusage accounting apis
- Bring mremap() closer to working
- Added ZIP APIs which will change
- Check for overflow in reallocarray()
- Remove overly fancy linkage in strerror()
- Fix GDB attach on crash w/ OpenBSD msyscall()
- Make sigqueue() portable to most UNIX distros
- Make integer serialization macros more elegant
- Bring back 34x tprecode8to16() performance boost
- Make malloc() more resilient to absurdly large sizes
Buffering now has optimal performance, bugs have been fixed, and some
missing apis have been introduced. This implementation is also now more
production worthy since it's less brittle now in terms of system errors.
That's going to help redbean since lua i/o is all based on stdio.
See #97
- removed unneeded share parameter from pipe on nt
- socktpair(type | SOCK_CLOEXEC) is now polyfilled
- use textwindows for linker micro-optimization
- apologies for auto clang-format diff noise :(
- improve socketpair docstring
See #122
- Polyfill open() w/ O_CLOEXEC on RHEL5
- Remove old workaround from rmdir() on the New Technology
- preadv() and pwritev() are now smarter about demodernization
- preadv() and pwritev() are now available on the New Technology
The ucontext_t data structure XNU passes us doesn't appear to be part of
known memory. So we can't use ASAN during the trampoline, which converts
it to a Linux ucontext_t data structure. Please note that this change
doesn't impact the signal handler itself, only the trampoline.
- Polyfill ucontext_t on FreeBSD/OpenBSD/NetBSD
- Add tests confirming signals can edit CPU state
- Work towards supporting ZIP filesystem on bare metal
- Add more tinymath unit tests for POSIX conformance
- Add X87 and SSE status flags to crash report
- Fix some bugs in blinkenlights
- Fix llvm build breakage
Your Actually Portable Executables now contains a simple virtual memory
that works similarly to the Linux Kernel in the sense that it maps your
physical memory to negative addresses. This is needed to support mmap()
and malloc(). This functionality has zero code size impact. For example
the MODE=tiny LIFE.COM executable is still only 12KB in size.
The APE bootloader code has also been simplified to improve readibility
and further elevate the elegance by which we're able to support so many
platforms thereby enhancing verifiability so that we may engender trust
in this bootloading process.
- Reduce full build latency from ~20s to ~18s
- Bring back silent mode if `make V=0` is passed
- Demodernize utimes() polyfill so it works RHEL5
- Delete some old shell scripts that are no longer needed
- Truncate long lines when outputting builds to Emacs buffers
You can now build Cosmopolitan with Clang:
make -j8 MODE=llvm
o/llvm/examples/hello.com
The assembler and linker code is now friendly to LLVM too.
So it's not needed to configure Clang to use binutils under
the hood. If you love LLVM then you can now use pure LLVM.
It turns out adding OpenBSD msyscall() origin verification broke the
--ftrace flag. The executable needs to issue raw syscalls while it's
rewriting itself. So they need to be in the same section, and that's
just plain simpler too.
- Get ASAN working on Windows.
- Deleting directories and then recreating them with the same name in a
short period of time appears to be a no-no on Windows.
- There's no reason to call FlushFileBuffers on close() for pipes, and
it's harmful since it might block indefinitely for no good reason.
- Support deterministic stacks on OpenBSD
- Support OpenBSD system call origin verification
- Fix overrun by one in chibicc string token allocator
- Get all chibicc tests passing under Address Sanitizer
This change enables Address Sanitizer systemically w/ `make MODE=dbg`.
Our version of Rust's `unsafe` keyword is named `noasan` which is used
for two functions that do aligned memory chunking, like `strcpy.c` and
we need to fix the tiny DEFLATE code, but that's it everything else is
fabulous you can have all the fischer price security blankets you need
Best of all is we're now able to use the ASAN data in Blinkenlights to
colorize the memory dumps. See the screenshot below of a test program:
https://justine.lol/blinkenlights/asan.png
Which is operating on float arrays stored on the stack, with red areas
indicating poisoned memory, and the green areas indicate valid memory.
We always favor calling functions like openat(), fstatat(), etc. because
Linux, XNU, FreeBSD, and OpenBSD all elected to support them, while some
systems like Android love them so much, that they stopped supporting the
old interfaces.
This change ensures that when dirfd is actually a dirfd and not AT_FDCWD
we'll do the right thing on Windows NT. We use an API that's been around
since Vista to accomplish that.
This change also adds exponential backoff to chdir() on Windows since it
seems almost as flaky on Windows 7 as the rmdir() function.
Justine says nay for the time being. Only XNU implements this. It's not
clear what ABI XNU is using but it's obviously not the one in the POSIX
documentation link below. Since all platforms implement vfork, it might
be better to empirically gauge the intersection of consensus which will
have better performance than this interface.
https://pubs.opengroup.org/onlinepubs/009696699/xrat/xsh_chap03.html
I rebooted Windows 7 and noticed that KERNEL32.DLL got relocated.
Microsoft needs to change and embrace the dream that was MULTICS.
Until then we'll need a better way to work around their dominion.
For the first time ever, all tests in this codebase now pass, when
run automatically on macos, freebsd, openbsd, rhel5, rhel7, alpine
and windows via the network using the runit and runitd build tools
- Fix vfork exec path etc.
- Add XNU opendir() support
- Add OpenBSD opendir() support
- Add Linux history to syscalls.sh
- Use copy_file_range on FreeBSD 13+
- Fix system calls with 7+ arguments
- Fix Windows with greater than 16 FDs
- Fix RUNIT.COM and RUNITD.COM flakiness
- Fix OpenBSD munmap() when files are mapped
- Fix long double so it's actually long on Windows
- Fix OpenBSD truncate() and ftruncate() thunk typo
- Let Windows fcntl() be used on socket files descriptors
- Fix Windows fstat() which had an accidental printf statement
- Fix RHEL5 CLOCK_MONOTONIC by not aliasing to CLOCK_MONOTONIC_RAW
This is wonderful. I never could have dreamed it would be possible
to get it working so well on so many platforms with tiny binaries.
Fixes#31Fixes#25Fixes#14
- Remove XD bit in page tables
- Fix cylinder+head+sector arithmetic
- Implement fstat() for serial file descriptors on metal
Here's how to boot an Actually Portable Executable in QEMU:
make -j12 o//tool/viz/deathstar.com
qemu-system-x86_64 -serial stdio -fda o//tool/viz/deathstar.com
Here's a screenshot of DEATHSTAR.COM booted in QEMU:
https://justine.lol/cosmopolitan/cosmo-metal-qemu.png
Thus metal support is in much better shape now, but still incomplete.
Only a few system calls have been polyfilled. To figure out which ones
your program needs, simply boot it in the blinkenlights emulator with a
breakpoint, and press CTRL-C to continue to the system call breakpoint.
If it doesn't break then you should be good. (Note: to emulate normally
you can press 'c' and use CTRL-T and ALT-T to tune the speed.)
m=tiny
make -j12 SILENT=0 MODE=$m \
o/$m/tool/build/blinkenlights.com \
o/$m/tool/viz/deathstar.com
o/$m/tool/build/blinkenlights.com \
-r -t -b systemfive.linux \
o/$m/tool/viz/deathstar.com
Thank @Theldus for the bug report that made this change possible.
Fixes#20 which explains this change further.
It turned out that the linker was doing the wrong with the amalgamation
library concerning weak stubs. A regression test has been added and new
binaries have been uploaded to https://justine.lol/cosmopolitan/
Ideally this should be fixed by building a tool that turns multiple .a
files into a single .a file with deduplication. As a workaround for now
the cosmopolitan.a build is restructured to not include LIBC_STUBS which
meant technical debt needed to be paid off where non-stub interfaces
were moved to LIBC_INTRIN and LIBC_NEXGEN32E.
Thank @PerfectProductions in #31 for the report!
This change pays off technical debt with the function -> DLL mappings in
libc/nt/master.sh, which was originally defined based on binary analysis
on Windows 10. It's now been updated so the kernel32/kernelbase/advapi32
imports should be exactly as they are written, on the MSDN documentation
and that wouldn't have been easy without Geoff Chappell's work thank him
https://www.geoffchappell.com/studies/windows/win32/index.htm
This program popped up on Hacker News recently. It's the only modern
compiler I've ever seen that doesn't have dependencies and is easily
modified. So I added all of the missing GNU extensions I like to use
which means it might be possible soon to build on non-Linux and have
third party not vendor gcc binaries.
A new rollup tool now exists for flattening out the headers in a way
that works better for our purposes than cpp. A lot of the API clutter
has been removed. APIs that aren't a sure thing in terms of general
recommendation are now marked internal.
There's now a smoke test for the amalgamation archive and gigantic
header file. So we can now guarantee you can use this project on the
easiest difficulty setting without the gigantic repository.
A website is being created, which is currently a work in progress:
https://justine.storage.googleapis.com/cosmopolitan/index.html
This is done without using Microsoft's internal APIs. MAP_PRIVATE
mappings are copied to the subprocess via a pipe, since Microsoft
doesn't want us to have proper COW pages. MAP_SHARED mappings are
remapped without needing to do any copying. Global variables need
copying along with the stack and the whole heap of anonymous mem.
This actually improves the reliability of the redbean http server
although one shouldn't expect 10k+ connections on a home computer
that isn't running software built to serve like Linux or FreeBSD.
blinkenlights now does a pretty good job emulating what happens when
binaries boot from BIOS into long mode. So it's been much easier to
debug the bare metal process and wrinkle out many issues.
This change includes many bug fixes, for the NT polyfills, strings,
memory, boot, and math libraries which were discovered by adding more
tools for recreational programming, such as PC emulation. Lemon has also
been vendored because it works so well at parsing languages.
- Emulator can now test the αcτµαlly pδrταblε εxεcµταblε bootloader
- Whipped up a webserver named redbean. It services 150k requests per
second on a single core. Bundling assets inside zip enables extremely
fast serving for two reasons. The first is that zip central directory
lookups go faster than stat() system calls. The second is that both
zip and gzip content-encoding use DEFLATE, therefore, compressed
responses can be served via the sendfile() system call which does an
in-kernel copy directly from the zip executable structure. Also note
that red bean zip executables can be deployed easily to all platforms,
since these native executables work on Linux, Mac, BSD, and Windows.
- Address sanitizer now works very well
I wanted a tiny scriptable meltdown proof way to run userspace programs
and visualize how program execution impacts memory. It helps to explain
how things like Actually Portable Executable works. It can show you how
the GCC generated code is going about manipulating matrices and more. I
didn't feel fully comfortable with Qemu and Bochs because I'm not smart
enough to understand them. I wanted something like gVisor but with much
stronger levels of assurances. I wanted a single binary that'll run, on
all major operating systems with an embedded GPL barrier ZIP filesystem
that is tiny enough to transpile to JavaScript and run in browsers too.
https://justine.storage.googleapis.com/emulator625.mp4
