At least in neovim, `│vi:` is not recognized as a modeline because it
has no preceding whitespace. After fixing this, opening a file yields
an error because `net` is not an option. (`noet`, however, is.)
- We now serialize the file descriptor table when spawning / executing
processes on Windows. This means you can now inherit more stuff than
just standard i/o. It's needed by bash, which duplicates the console
to file descriptor #255. We also now do a better job serializing the
environment variables, so you're less likely to encounter E2BIG when
using your bash shell. We also no longer coerce environ to uppercase
- execve() on Windows now remotely controls its parent process to make
them spawn a replacement for itself. Then it'll be able to terminate
immediately once the spawn succeeds, without having to linger around
for the lifetime as a shell process for proxying the exit code. When
process worker thread running in the parent sees the child die, it's
given a handle to the new child, to replace it in the process table.
- execve() and posix_spawn() on Windows will now provide CreateProcess
an explicit handle list. This allows us to remove handle locks which
enables better fork/spawn concurrency, with seriously correct thread
safety. Other codebases like Go use the same technique. On the other
hand fork() still favors the conventional WIN32 inheritence approach
which can be a little bit messy, but is *controlled* by guaranteeing
perfectly clean slates at both the spawning and execution boundaries
- sigset_t is now 64 bits. Having it be 128 bits was a mistake because
there's no reason to use that and it's only supported by FreeBSD. By
using the system word size, signal mask manipulation on Windows goes
very fast. Furthermore @asyncsignalsafe funcs have been rewritten on
Windows to take advantage of signal masking, now that it's much more
pleasant to use.
- All the overlapped i/o code on Windows has been rewritten for pretty
good signal and cancelation safety. We're now able to ensure overlap
data structures are cleaned up so long as you don't longjmp() out of
out of a signal handler that interrupted an i/o operation. Latencies
are also improved thanks to the removal of lots of "busy wait" code.
Waits should be optimal for everything except poll(), which shall be
the last and final demon we slay in the win32 i/o horror show.
- getrusage() on Windows is now able to report RUSAGE_CHILDREN as well
as RUSAGE_SELF, thanks to aggregation in the process manager thread.
- Improved async signal safety of read() particularly for longjmp()
- Started adding cancel cleanup handlers for locks / etc on Windows
- Make /dev/tty work better particularly for uses like `foo | less`
- Eagerly read console input into a linked list, so poll can signal
- Fix some libc definitional bugs, which configure scripts detected
The stdio reader thread now appears to be working recursively along
cosmopolitan subprocesses. For example, it's now possible to launch
vim.com from the unbourne.com bestline repl, thanks to hacks plus a
bug fix to select() timeouts.
readdir() will now always yield an inode that's consistent with stat()
on ZipOS and Windows in general. More APIs have been updated to return
the appropriate error code when inappropriately trying to do ops, like
sockets, with a zip file descriptor. The path normalization algorithms
are now fully fleshed out. Some socket APIs have been fixed so they'll
raise EBADF vs. ENOTSOCK appropriately. Lastly seekdir() will now work
properly on NetBSD and FreeBSD (not sure why anyone would even use it)
This change fixes an issue with the tcflow() magic numbers that was
causing bash to freeze up on Linux. While auditing termios polyfills,
several other issues were identified with XNU/BSD compatibility.
Out of an abundance of caution this change undefines as much surface
area from libc/calls/struct/termios.h as possible, so that autoconf
scripts are less likely to detect non-POSIX teletypewriter APIs that
haven't been polyfilled by Cosmopolitan.
This is a *breaking change* for your static archives in /opt/cosmos if
you use the cosmocc toolchain. That's because this change disables the
ioctl() undiamonding trick for code outside the monorepo, specifically
because it'll lead to brittle ABI breakages like this. If you're using
the cosmocc toolchain, you'll need to rebuild libraries like ncurses,
readline, etc. Yes diamonds cause bloat. To work around that, consider
using tcgetwinsize() instead of ioctl(TIOCGWINSZ) since it'll help you
avoid pulling every single ioctl-related polyfill into the linkage.
The cosmocc script was specifying -DNDEBUG for some reason. It's fixed.
- Invent iso8601us() for faster timestamps
- Improve --strace descriptions of sigset_t
- Rebuild the Landlock Make bootstrap binary
- Introduce MODE=sysv for non-Windows builds
- Permit OFD fcntl() locks under pledge(flock)
- redbean can now protect your kernel from ddos
- Have vfork() fallback to sys_fork() not fork()
- Change kmalloc() to not die when out of memory
- Improve documentation for some termios functions
- Rewrite putenv() and friends to conform to POSIX
- Fix linenoise + strace verbosity issue on Windows
- Fix regressions in our ability to show backtraces
- Change redbean SetHeader() to no-op if value is nil
- Improve fcntl() so SQLite locks work in non-WAL mode
- Remove some unnecessary work during fork() on Windows
- Create redbean-based SSL reverse proxy for IPv4 TurfWar
- Fix ape/apeinstall.sh warning when using non-bash shells
- Add ProgramTrustedIp(), and IsTrustedIp() APIs to redbean
- Support $PWD, $UID, $GID, and $EUID in command interpreter
- Introduce experimental JTqFpD APE prefix for non-Windows builds
- Invent blackhole daemon for firewalling IP addresses via UNIX named socket
- Add ProgramTokenBucket(), AcquireToken(), and CountTokens() APIs to redbean
The ZIP filesystem has a breaking change. You now need to use /zip/ to
open() / opendir() / etc. assets within the ZIP structure of your APE
binary, instead of the previous convention of using zip: or zip! URIs.
This is needed because Python likes to use absolute paths, and having
ZIP paths encoded like URIs simply broke too many things.
Many more system calls have been updated to be able to operate on ZIP
files and file descriptors. In particular fcntl() and ioctl() since
Python would do things like ask if a ZIP file is a terminal and get
confused when the old implementation mistakenly said yes, because the
fastest way to guarantee native file descriptors is to dup(2). This
change also improves the async signal safety of zipos and ensures it
doesn't maintain any open file descriptors beyond that which the user
has opened.
This change makes a lot of progress towards adding magic numbers that
are specific to platforms other than Linux. The philosophy here is that,
if you use an operating system like FreeBSD, then you should be able to
take advantage of FreeBSD exclusive features, even if we don't polyfill
them on other platforms. For example, you can now open() a file with the
O_VERIFY flag. If your program runs on other platforms, then Cosmo will
automatically set O_VERIFY to zero. This lets you safely use it without
the need for #ifdef or ifstatements which detract from readability.
One of the blindspots of the ASAN memory hardening we use to offer Rust
like assurances has always been that memory passed to the kernel via
system calls (e.g. writev) can't be checked automatically since the
kernel wasn't built with MODE=asan. This change makes more progress
ensuring that each system call will verify the soundness of memory
before it's passed to the kernel. The code for doing these checks is
fast, particularly for buffers, where it can verify 64 bytes a cycle.
- Correct O_LOOP definition on NT
- Introduce program_executable_name
- Add ASAN guards to more system calls
- Improve termios compatibility with BSDs
- Fix bug in Windows auxiliary value encoding
- Add BSD and XNU specific errnos and open flags
- Add check to ensure build doesn't talk to internet
This change gets the Python codebase into a state where it conforms to
the conventions of this codebase. It's now possible to include headers
from Python, without worrying about ordering. Python has traditionally
solved that problem by "diamonding" everything in Python.h, but that's
problematic since it means any change to any Python header invalidates
all the build artifacts. Lastly it makes tooling not work. Since it is
hard to explain to Emacs when I press C-c C-h to add an import line it
shouldn't add the header that actually defines the symbol, and instead
do follow the nonstandard Python convention.
Progress has been made on letting Python load source code from the zip
executable structure via the standard C library APIs. System calss now
recognizes zip!FILENAME alternative URIs as equivalent to zip:FILENAME
since Python uses colon as its delimiter.
Some progress has been made on embedding the notice license terms into
the Python object code. This is easier said than done since Python has
an extremely complicated ownership story.
- Some termios APIs have been added
- Implement rewinddir() dirstream API
- GetCpuCount() API added to Cosmopolitan Libc
- More bugs in Cosmopolitan Libc have been fixed
- zipobj.com now has flags for mangling the path
- Fixed bug a priori with sendfile() on certain BSDs
- Polyfill F_DUPFD and F_DUPFD_CLOEXEC across platforms
- FIOCLEX / FIONCLEX now polyfilled for fast O_CLOEXEC changes
- APE now supports a hybrid solution to no-self-modify for builds
- Many BSD-only magnums added, e.g. O_SEARCH, O_SHLOCK, SF_NODISKIO
