It's now possible to use execve() when the parent process isn't built by
cosmo. In such cases, the current process will kill all threads and then
linger around, waiting for the newly created process to die, and then we
propagate its exit code to the parent. This should help bazel and others
Allocating private anonymous memory is now 5x faster on Windows. This is
thanks to VirtualAlloc() which is faster than the file mapping APIs. The
fork() function also now goes 30% faster, since we are able to avoid the
VirtualProtect() calls on mappings in most cases now.
Fixes#1253
This change introduces a new deadlock detector for Cosmo's POSIX threads
implementation. Error check mutexes will now track a DAG of nested locks
and report EDEADLK when a deadlock is theoretically possible. These will
occur rarely, but it's important for production hardening your code. You
don't even need to change your mutexes to use the POSIX error check mode
because `cosmocc -mdbg` will enable error checking on mutexes by default
globally. When cycles are found, an error message showing your demangled
symbols describing the strongly connected component are printed and then
the SIGTRAP is raised, which means you'll also get a backtrace if you're
using ShowCrashReports() too. This new error checker is so low-level and
so pure that it's able to verify the relationships of every libc runtime
lock, including those locks upon which the mutex implementation depends.
In the course of playing with redbean I was confused about how the state
was behaving and then noticed that some stuff is maybe getting edited by
multiple processes. I tried to improve things by changing the definition
of the counter variables to be explicitly atomic. Claude assures me that
most modern Unixes support cross-process atomics, so I just went with it
on that front.
I also added some mutexes to the shared state to try to synchronize some
other things that might get written or read from workers but couldn't be
made atomic, mainly the rusage and time values. I could've probably been
less granular and just had a global shared-state lock, but I opted to be
fairly granular as a starting point.
This also reorders the resetting of the lastmeltdown timespec before the
SIGUSR2 signal is sent; hopefully this is okay.
The worst issue I had with consts.sh for clock_gettime is how it defined
too many clocks. So I looked into these clocks all day to figure out how
how they overlap in functionality. I discovered counter-intuitive things
such as how CLOCK_MONOTONIC should be CLOCK_UPTIME on MacOS and BSD, and
that CLOCK_BOOTTIME should be CLOCK_MONOTONIC on MacOS / BSD. Windows 10
also has some incredible new APIs, that let us simplify clock_gettime().
- Linux CLOCK_REALTIME -> GetSystemTimePreciseAsFileTime()
- Linux CLOCK_MONOTONIC -> QueryUnbiasedInterruptTimePrecise()
- Linux CLOCK_MONOTONIC_RAW -> QueryUnbiasedInterruptTimePrecise()
- Linux CLOCK_REALTIME_COARSE -> GetSystemTimeAsFileTime()
- Linux CLOCK_MONOTONIC_COARSE -> QueryUnbiasedInterruptTime()
- Linux CLOCK_BOOTTIME -> QueryInterruptTimePrecise()
Documentation on the clock crew has been added to clock_gettime() in the
docstring and in redbean's documentation too. You can read that to learn
interesting facts about eight essential clocks that survived this purge.
This is original research you will not find on Google, OpenAI, or Claude
I've tested this change by porting *NSYNC to become fully clock agnostic
since it has extensive tests for spotting irregularities in time. I have
also included these tests in the default build so they no longer need to
be run manually. Both CLOCK_REALTIME and CLOCK_MONOTONIC are good across
the entire amd64 and arm64 test fleets.
Cosmopolitan now supports mremap(), which is only supported on Linux and
NetBSD. First, it allows memory mappings to be relocated without copying
them; this can dramatically speed up data structures like std::vector if
the array size grows larger than 256kb. The mremap() system call is also
10x faster than munmap() when shrinking large memory mappings.
There's now two functions, getpagesize() and getgransize() which help to
write portable code that uses mmap(MAP_FIXED). Alternative sysconf() may
be called with our new _SC_GRANSIZE. The madvise() system call now has a
better wrapper with improved documentation.
We now have a C++ red-black tree implementation that implements standard
template library compatible APIs while compiling 10x faster than libcxx.
It's not as beautiful as the red-black tree implementation in Plinko but
this will get the job done and the test proves it upholds all invariants
This change also restores CheckForMemoryLeaks() support and fixes a real
actual bug I discovered with Doug Lea's dlmalloc_inspect_all() function.
Actually Portable Executable now supports Android. Cosmo's old mmap code
required a 47 bit address space. The new implementation is very agnostic
and supports both smaller address spaces (e.g. embedded) and even modern
56-bit PML5T paging for x86 which finally came true on Zen4 Threadripper
Cosmopolitan no longer requires UNIX systems to observe the Windows 64kb
granularity; i.e. sysconf(_SC_PAGE_SIZE) will now report the host native
page size. This fixes a longstanding POSIX conformance issue, concerning
file mappings that overlap the end of file. Other aspects of conformance
have been improved too, such as the subtleties of address assignment and
and the various subtleties surrounding MAP_FIXED and MAP_FIXED_NOREPLACE
On Windows, mappings larger than 100 megabytes won't be broken down into
thousands of independent 64kb mappings. Support for MAP_STACK is removed
by this change; please use NewCosmoStack() instead.
Stack overflow avoidance is now being implemented using the POSIX thread
APIs. Please use GetStackBottom() and GetStackAddr(), instead of the old
error-prone GetStackAddr() and HaveStackMemory() APIs which are removed.
Cosmopolitan now supports 104 time zones. They're embedded inside any
binary that links the localtime() function. Doing so adds about 100kb
to the binary size. This change also gets time zones working properly
on Windows for the first time. It's not needed to have /etc/localtime
exist on Windows, since we can get this information from WIN32. We're
also now updated to the latest version of Paul Eggert's TZ library.
Commit bc6c183 introduced a bunch of discrepancies between what files
look like in the repo and what clang-format says they should look like.
However, there were already a few discrepancies prior to that. Most of
these discrepancies seemed to be unintentional, but a few of them were
load-bearing (e.g., a #include that violated header ordering needing
something to have been #defined by a 'later' #include.)
I opted to take what I hope is a relatively smooth-brained approach: I
reverted the .clang-format change, ran clang-format on the whole repo,
reapplied the .clang-format change, reran clang-format again, and then
reverted the commit that contained the first run. Thus the full effect
of this PR should only be to apply the changed formatting rules to the
repo, and from skimming the results, this seems to be the case.
My work can be checked by applying the short, manual commits, and then
rerunning the command listed in the autogenerated commits (those whose
messages I have prefixed auto:) and seeing if your results agree.
It might be that the other diffs should be fixed at some point but I'm
leaving that aside for now.
fd '\.c(c|pp)?$' --print0| xargs -0 clang-format -i
Now that these functions are behind _COSMO_SOURCE there's no reason for
having the ugly underscore anymore. To use these functions, you need to
pass -mcosmo to cosmocc.
The WIN32 CreateProcess() function does not require an .exe or .com
suffix in order to spawn an executable. Now that we have Cosmo bash
we're no longer so dependent on the cmd.exe prompt.
It's now possible to use redbean Fetch() with arbitrary HTTP methods,
e.g. LIST which is used by Hashicorp. There's an eight char limit and
uppercase canonicalization still happens. This change also includes a
better function for launching a browser tab, that won't deadlock on a
headless workstation running Debian.
Closes#1107
This change upgrades to GCC 12.3 and GNU binutils 2.42. The GNU linker
appears to have changed things so that only a single de-duplicated str
table is present in the binary, and it gets placed wherever the linker
wants, regardless of what the linker script says. To cope with that we
need to stop using .ident to embed licenses. As such, this change does
significant work to revamp how third party licenses are defined in the
codebase, using `.section .notice,"aR",@progbits`.
This new GCC 12.3 toolchain has support for GNU indirect functions. It
lets us support __target_clones__ for the first time. This is used for
optimizing the performance of libc string functions such as strlen and
friends so far on x86, by ensuring AVX systems favor a second codepath
that uses VEX encoding. It shaves some latency off certain operations.
It's a useful feature to have for scientific computing for the reasons
explained by the test/libcxx/openmp_test.cc example which compiles for
fifteen different microarchitectures. Thanks to the upgrades, it's now
also possible to use newer instruction sets, such as AVX512FP16, VNNI.
Cosmo now uses the %gs register on x86 by default for TLS. Doing it is
helpful for any program that links `cosmo_dlopen()`. Such programs had
to recompile their binaries at startup to change the TLS instructions.
That's not great, since it means every page in the executable needs to
be faulted. The work of rewriting TLS-related x86 opcodes, is moved to
fixupobj.com instead. This is great news for MacOS x86 users, since we
previously needed to morph the binary every time for that platform but
now that's no longer necessary. The only platforms where we need fixup
of TLS x86 opcodes at runtime are now Windows, OpenBSD, and NetBSD. On
Windows we morph TLS to point deeper into the TIB, based on a TlsAlloc
assignment, and on OpenBSD/NetBSD we morph %gs back into %fs since the
kernels do not allow us to specify a value for the %gs register.
OpenBSD users are now required to use APE Loader to run Cosmo binaries
and assimilation is no longer possible. OpenBSD kernel needs to change
to allow programs to specify a value for the %gs register, or it needs
to stop marking executable pages loaded by the kernel as mimmutable().
This release fixes __constructor__, .ctor, .init_array, and lastly the
.preinit_array so they behave the exact same way as glibc.
We no longer use hex constants to define math.h symbols like M_PI.
Renaming gc() to _gc() was a mistake since the better thing to do is put
it behind the _COSMO_SOURCE macro. We need this change because I haven't
wanted to use my amazing garbage collector ever since we renamed it. You
now need to define _COSMO_SOURCE yourself when using amalgamation header
and cosmocc users need to pass the -mcosmo flag to get the gc() function
Some other issues relating to cancelation have been fixed along the way.
We're also now putting cosmocc in a folder named `.cosmocc` so it can be
more safely excluded by grep --exclude-dir=.cosmocc --exclude-dir=o etc.
Now that our socket system call polyfills are good enough to support
Musl's DNS library we should be using that rather than the barebones
domain name system implementation we rolled on our own. There's many
benefits to making this change. So many, that I myself wouldn't feel
qualified to enumerate them all. The Musl DNS code had to be changed
in order to support Windows of course, which looks very solid so far
Somehow or another, I previously had missed `BUILD.mk` files.
In the process I found a few straggler cases where the modeline was
different from the file, including one very involved manual fix where a
file had been treated like it was ts=2 and ts=8 on separate occasions.
The commit history in the PR shows the gory details; the BUILD.mk was
automated, everything else was mostly manual.
At least in neovim, `│vi:` is not recognized as a modeline because it
has no preceding whitespace. After fixing this, opening a file yields
an error because `net` is not an option. (`noet`, however, is.)
