- We now serialize the file descriptor table when spawning / executing
processes on Windows. This means you can now inherit more stuff than
just standard i/o. It's needed by bash, which duplicates the console
to file descriptor #255. We also now do a better job serializing the
environment variables, so you're less likely to encounter E2BIG when
using your bash shell. We also no longer coerce environ to uppercase
- execve() on Windows now remotely controls its parent process to make
them spawn a replacement for itself. Then it'll be able to terminate
immediately once the spawn succeeds, without having to linger around
for the lifetime as a shell process for proxying the exit code. When
process worker thread running in the parent sees the child die, it's
given a handle to the new child, to replace it in the process table.
- execve() and posix_spawn() on Windows will now provide CreateProcess
an explicit handle list. This allows us to remove handle locks which
enables better fork/spawn concurrency, with seriously correct thread
safety. Other codebases like Go use the same technique. On the other
hand fork() still favors the conventional WIN32 inheritence approach
which can be a little bit messy, but is *controlled* by guaranteeing
perfectly clean slates at both the spawning and execution boundaries
- sigset_t is now 64 bits. Having it be 128 bits was a mistake because
there's no reason to use that and it's only supported by FreeBSD. By
using the system word size, signal mask manipulation on Windows goes
very fast. Furthermore @asyncsignalsafe funcs have been rewritten on
Windows to take advantage of signal masking, now that it's much more
pleasant to use.
- All the overlapped i/o code on Windows has been rewritten for pretty
good signal and cancelation safety. We're now able to ensure overlap
data structures are cleaned up so long as you don't longjmp() out of
out of a signal handler that interrupted an i/o operation. Latencies
are also improved thanks to the removal of lots of "busy wait" code.
Waits should be optimal for everything except poll(), which shall be
the last and final demon we slay in the win32 i/o horror show.
- getrusage() on Windows is now able to report RUSAGE_CHILDREN as well
as RUSAGE_SELF, thanks to aggregation in the process manager thread.
It's now possible to use sigaltstack() to recover from stack overflows
on Windows. Several bugs in sigaltstack() have been fixed, for all our
supported platforms. There's a newer better example showing how to use
this, along with three independent unit tests just to further showcase
the various techniques.
- This change fixes a bug that allowed unbuffered printf() output (to
streams like stderr) to be truncated. This regression was introduced
some time between now and the last release.
- POSIX specifies all functions as thread safe by default. This change
works towards cleaning up our use of the @threadsafe / @threadunsafe
documentation annotations to reflect that. The goal is (1) to use
@threadunsafe to document functions which POSIX say needn't be thread
safe, and (2) use @threadsafe to document functions that we chose to
implement as thread safe even though POSIX didn't mandate it.
- Tidy up the clock_gettime() implementation. We're now trying out a
cleaner approach to system call support that aims to maintain the
Linux errno convention as long as possible. This also fixes bugs that
existed previously, where the vDSO errno wasn't being translated
properly. The gettimeofday() system call is now a wrapper for
clock_gettime(), which reduces bloat in apps that use both.
- The recently-introduced improvements to the execute bit on Windows has
had bugs fixed. access(X_OK) on a directory on Windows now succeeds.
fstat() will now perform the MZ/#! ReadFile() operation correctly.
- Windows.h is no longer included in libc/isystem/, because it confused
PCRE's build system into thinking Cosmopolitan is a WIN32 platform.
Cosmo's Windows.h polyfill was never even really that good, since it
only defines a subset of the subset of WIN32 APIs that Cosmo defines.
- The setlongerjmp() / longerjmp() APIs are removed. While they're nice
APIs that are superior to the standardized setjmp / longjmp functions,
they weren't superior enough to not be dead code in the monorepo. If
you use these APIs, please file an issue and they'll be restored.
- The .com appending magic has now been removed from APE Loader.
- Improved async signal safety of read() particularly for longjmp()
- Started adding cancel cleanup handlers for locks / etc on Windows
- Make /dev/tty work better particularly for uses like `foo | less`
- Eagerly read console input into a linked list, so poll can signal
- Fix some libc definitional bugs, which configure scripts detected
- Every unit test now passes on Apple Silicon. The final piece of this
puzzle was porting our POSIX threads cancelation support, since that
works differently on ARM64 XNU vs. AMD64. Our semaphore support on
Apple Silicon is also superior now compared to AMD64, thanks to the
grand central dispatch library which lets *NSYNC locks go faster.
- The Cosmopolitan runtime is now more stable, particularly on Windows.
To do this, thread local storage is mandatory at all runtime levels,
and the innermost packages of the C library is no longer being built
using ASAN. TLS is being bootstrapped with a 128-byte TIB during the
process startup phase, and then later on the runtime re-allocates it
either statically or dynamically to support code using _Thread_local.
fork() and execve() now do a better job cooperating with threads. We
can now check how much stack memory is left in the process or thread
when functions like kprintf() / execve() etc. call alloca(), so that
ENOMEM can be raised, reduce a buffer size, or just print a warning.
- POSIX signal emulation is now implemented the same way kernels do it
with pthread_kill() and raise(). Any thread can interrupt any other
thread, regardless of what it's doing. If it's blocked on read/write
then the killer thread will cancel its i/o operation so that EINTR can
be returned in the mark thread immediately. If it's doing a tight CPU
bound operation, then that's also interrupted by the signal delivery.
Signal delivery works now by suspending a thread and pushing context
data structures onto its stack, and redirecting its execution to a
trampoline function, which calls SetThreadContext(GetCurrentThread())
when it's done.
- We're now doing a better job managing locks and handles. On NetBSD we
now close semaphore file descriptors in forked children. Semaphores on
Windows can now be canceled immediately, which means mutexes/condition
variables will now go faster. Apple Silicon semaphores can be canceled
too. We're now using Apple's pthread_yield() funciton. Apple _nocancel
syscalls are now used on XNU when appropriate to ensure pthread_cancel
requests aren't lost. The MbedTLS library has been updated to support
POSIX thread cancelations. See tool/build/runitd.c for an example of
how it can be used for production multi-threaded tls servers. Handles
on Windows now leak less often across processes. All i/o operations on
Windows are now overlapped, which means file pointers can no longer be
inherited across dup() and fork() for the time being.
- We now spawn a thread on Windows to deliver SIGCHLD and wakeup wait4()
which means, for example, that posix_spawn() now goes 3x faster. POSIX
spawn is also now more correct. Like Musl, it's now able to report the
failure code of execve() via a pipe although our approach favors using
shared memory to do that on systems that have a true vfork() function.
- We now spawn a thread to deliver SIGALRM to threads when setitimer()
is used. This enables the most precise wakeups the OS makes possible.
- The Cosmopolitan runtime now uses less memory. On NetBSD for example,
it turned out the kernel would actually commit the PT_GNU_STACK size
which caused RSS to be 6mb for every process. Now it's down to ~4kb.
On Apple Silicon, we reduce the mandatory upstream thread size to the
smallest possible size to reduce the memory overhead of Cosmo threads.
The examples directory has a program called greenbean which can spawn
a web server on Linux with 10,000 worker threads and have the memory
usage of the process be ~77mb. The 1024 byte overhead of POSIX-style
thread-local storage is now optional; it won't be allocated until the
pthread_setspecific/getspecific functions are called. On Windows, the
threads that get spawned which are internal to the libc implementation
use reserve rather than commit memory, which shaves a few hundred kb.
- sigaltstack() is now supported on Windows, however it's currently not
able to be used to handle stack overflows, since crash signals are
still generated by WIN32. However the crash handler will still switch
to the alt stack, which is helpful in environments with tiny threads.
- Test binaries are now smaller. Many of the mandatory dependencies of
the test runner have been removed. This ensures many programs can do a
better job only linking the the thing they're testing. This caused the
test binaries for LIBC_FMT for example, to decrease from 200kb to 50kb
- long double is no longer used in the implementation details of libc,
except in the APIs that define it. The old code that used long double
for time (instead of struct timespec) has now been thoroughly removed.
- ShowCrashReports() is now much tinier in MODE=tiny. Instead of doing
backtraces itself, it'll just print a command you can run on the shell
using our new `cosmoaddr2line` program to view the backtrace.
- Crash report signal handling now works in a much better way. Instead
of terminating the process, it now relies on SA_RESETHAND so that the
default SIG_IGN behavior can terminate the process if necessary.
- Our pledge() functionality has now been fully ported to AARCH64 Linux.
This changes *NSYNC to allocate waiters on the stack so our locks don't
need to depend on dynamic memory. This make our runtiem simpler, and it
also fixes bugs with thread cancellation support.
This change fixes bugs in the APE loader. The execve() unit tests are
now enabled for MODE=aarch64. See the README for how you need to have
binfmt_misc configured with Qemu to run them. Apple Silicon bugs have
been fixed too, e.g. tkill() now works.
The stdio reader thread now appears to be working recursively along
cosmopolitan subprocesses. For example, it's now possible to launch
vim.com from the unbourne.com bestline repl, thanks to hacks plus a
bug fix to select() timeouts.
- Polyfill readlink("foo/") dir check on Windows
- Support asynchronous signal delivery on Windows
- Restore Windows Console from execve() daisy chain
- Work around bug in AARCH64 Optimized Routines memcmp()
- Disable unbourne.com shell completion on Windows for now
- Don't always set virtual terminal input state on console
- Remove Musl Libc's unusual preservation of realpath("//")
- Make realpath() strongly link malloc() to pass configure test
- Delete cosh.com shell, now that unbourne.com works on Windows!
- Invent openatemp() API
- Invent O_UNLINK open flag
- Introduce getenv_secure() API
- Remove `git pull` from cosmocc
- Fix utimes() when path is NULL
- Fix mktemp() to never return NULL
- Fix utimensat() UTIME_OMIT on XNU
- Improve utimensat() code for RHEL5
- Turn `argv[0]` C:/ to /C/ on Windows
- Introduce tmpnam() and tmpnam_r() APIs
- Fix more const issues with internal APIs
- Permit utimes() on WIN32 in O_RDONLY mode
- Fix fdopendir() to check fd is a directory
- Fix recent crash regression in landlock make
- Fix futimens(AT_FDCWD, NULL) to return EBADF
- Use workaround so `make -j` doesn't fork bomb
- Rename dontdiscard to __wur (just like glibc)
- Fix st_size for WIN32 symlinks containing UTF-8
- Introduce stdio ext APIs needed by GNU coreutils
- Fix lstat() on WIN32 for symlinks to directories
- Move some constants from normalize.inc to limits.h
- Fix segv with memchr() and memcmp() overlapping page
- Implement POSIX fflush() behavior for reader streams
- Implement AT_SYMLINK_NOFOLLOW for utimensat() on WIN32
- Don't change read-only status of existing files on WIN32
- Correctly handle `0x[^[:xdigit:]]` case in strtol() functions
This change fixes Cosmopolitan so it has fewer opinions about compiler
warnings. The whole repository had to be cleaned up to be buildable in
-Werror -Wall mode. This lets us benefit from things like strict const
checking. Some actual bugs might have been caught too.
- Introduce ualarm() function
- Make rename() report EISEMPTY on Windows
- Always raise EINVAL upon open(O_RDONLY|O_TRUNC)
- Add macro so ./configure will detect SOCK_CLOEXEC
- Fix O_TRUNC without O_CREAT not working on Windows
- Let fcntl(F_SETFL) change O_APPEND status on Windows
- Make sure pwrite() / pread() report ESPIPE on sockets
- Raise ESPIPE on Windows when pwrite() is used on pipe
- Properly compute O_APPEND CreateFile() flags on Windows
- Don't require O_DIRECTORY to open directories on Windows
- Fix more instances of Windows reporting EISDIR and ENOTDIR
- Normalize EFTYPE and EMLINK to ELOOP on NetBSD and FreeBSD
- Make unlink() / rmdir() work on read-only files on Windows
- Validate UTF-8 on Windows paths to fix bug with overlong NUL
- Always print signal name to stderr when crashing due to SIG_DFL
- Fix Windows bug where denormalized paths >260 chars didn't work
- Block signals on BSDs when thread exits before trashing its own stack
This change reduces the memory requirements of your APE Loader by 10x,
in terms of virtual memory size, thanks to the help of alloca(). We're
also now creating argument blocks with the same layout across systems.
- Fix mkdeps.com out of memory error
- Remove static memory from __get_cpu_count()
- Add support for passing hyphen to cat in cocmd
- Change more ZipOS errors from ENOTSUP to EROFS
- Specify mem_unit in sysinfo() output on BSD OSes
readdir() will now always yield an inode that's consistent with stat()
on ZipOS and Windows in general. More APIs have been updated to return
the appropriate error code when inappropriately trying to do ops, like
sockets, with a zip file descriptor. The path normalization algorithms
are now fully fleshed out. Some socket APIs have been fixed so they'll
raise EBADF vs. ENOTSOCK appropriately. Lastly seekdir() will now work
properly on NetBSD and FreeBSD (not sure why anyone would even use it)
This change improves the dirstream library in a lot of respects,
especially for /zip/... files. Also turn off MAP_STACK on Aarch64
because Qemu seems to implement it differently than Linux and it's
probably responsible for a lot of mysterious crashes.
You can now play Super Mario Bros in CMD.EXE using Cosmopolitan! This is
thanks to a new worker thread that's spawned on Windows whenever any one
of poll(), select(), or ioctl(FIONREAD) is linked.
We were using a shell heredoc value '@' to terminate the dos stub, but
that's not sufficiently safe. We found out sh doesn't consider control
characters as contributing to the start of a line, and had the unlucky
chance of the linker choosing the number 2624 for e_lfanew, and that's
"@\n" in ASCII, which compromised the APE shell script.
We now use the heredoc 'justineXXXXXX' with 31 bits of entropy, that's
determistically generated by hashing apelink inputs w/ crc32 / blake2b
make all test CC=fatcosmocc AR='fatcosmoar rcu'
This change introduces a program named mktemper.com which provides more
reliable and secure temporary file name generation for scripts. It also
makes our ar.com program more permissive in what commands it'll accept.
The cosmocc command is improved by this change too.
This way complex runtime features (e.g. ftrace, symbol tables) can
always yoink zipos support. This is important now that apelink.com
automates embedding symbol tables for multiple cpus.
This new script is an alternative to the `cosmocc` command. It's still a
work in progress. It abstracts all the gory details of building separate
copies of your executable and then running the apelink.com program.
If you build a static ELF executable in `ld -q` mode (which leaves rela
sections inside the binary) then you can run it through the elf2pe.com
program afterwards, which will turn it into a PE executable. We have a
new trick for defining WIN32 DLL imports in C without any assembly code.
This also achieves the optimally tiny and perfect PE binary structure.
We need this because it isn't possible to have a GNU ld linker script
generate a PE file where the virtual pointer and the file pointer can
drift apart. This post-linker can do that. One cool benefit is we can
now use a smaller 512-byte alignment in the file, and an even bigger
64kb alignment for the segment virtual addresses, and the executable
ends up being smaller.
Another program introduced by this change is pecheck.com which can do
extensive linting of PE static executables to help explain why Windows
won't load it.
- Blocking read operations on the Windows Console can now EINTR
- Blocking read operations on Windows pipes now EINTR more reliably
- setitimer() will no longer be inherited across fork() on Windows
- It's now possible to use ECHO when the console is in raw mode
- The ECHOCTL flag now works correctly on the Windows Console
- The ICRNL flag now works correctly on the Windows Console
- pread() and pwrite() will now raise ESPIPE on Windows
- Opening /dev/tty on Windows is improved (untested)
- Overlapped I/O is now implemented in a better way
- Remove PAGESIZE constant
- Fix realloc() documentation
- Fix ttyname_r() error reporting
- Make forking more reliable on Windows
- Make execvp() a few microseconds faster
- Make system() a few microseconds faster
- Tighten up the socket-related magic numbers
- Loosen restrictions on mmap() offset alignment
- Improve GetProgramExecutableName() with getenv("_")
- Use mkstemp() as basis for mktemp(), tmpfile(), tmpfd()
- Fix flakes in pthread_cancel_test, unix_test, fork_test
- Fix recently introduced futex stack overflow regression
- Let sockets be passed as stdio to subprocesses on Windows
- Improve security of bind() on Windows w/ SO_EXCLUSIVEADDRUSE
This change addresses everything from stack smashing to %SYSTEMROOT%
breaking socket(). Issues relating to compile.com not reporting text
printed to stderr has been resolved for Windows builds.
This change ports APE Loader to Linux AARCH64, so that Raspberry Pi
users can run programs like redbean, without the executable needing
to modify itself. Progress has also slipped into this change on the
issue of making progress better conforming to user expectations and
industry standards regarding which symbols we're allowed to declare
This version has better error messages and safety checks. It supports
loading static position-independent executables. It correctly handles
more kinds of weird ELF program header layouts. A force flag has been
added to avoid system execve(). Finally the longstanding misalignment
with our ELF PT_NOTE section has been addressed.
