* [metal] Add a uprintf() routine, for non-emergency boot logging
* [metal] _Really_ push forward timing of VGA TTY initialization
* [metal] Do something useful with uprintf()
* [metal] Locate some ACPI tables, for later hardware detection
Specifically the code now tries to find the ACPI RSDP,
RSDT/XSDT, FADT, & MADT tables, whether in legacy BIOS
bootup mode or in a UEFI bootup. These are useful for
figuring out how to (re)enable asynchronous interrupts
in legacy 8259 PIC mode.
- We now serialize the file descriptor table when spawning / executing
processes on Windows. This means you can now inherit more stuff than
just standard i/o. It's needed by bash, which duplicates the console
to file descriptor #255. We also now do a better job serializing the
environment variables, so you're less likely to encounter E2BIG when
using your bash shell. We also no longer coerce environ to uppercase
- execve() on Windows now remotely controls its parent process to make
them spawn a replacement for itself. Then it'll be able to terminate
immediately once the spawn succeeds, without having to linger around
for the lifetime as a shell process for proxying the exit code. When
process worker thread running in the parent sees the child die, it's
given a handle to the new child, to replace it in the process table.
- execve() and posix_spawn() on Windows will now provide CreateProcess
an explicit handle list. This allows us to remove handle locks which
enables better fork/spawn concurrency, with seriously correct thread
safety. Other codebases like Go use the same technique. On the other
hand fork() still favors the conventional WIN32 inheritence approach
which can be a little bit messy, but is *controlled* by guaranteeing
perfectly clean slates at both the spawning and execution boundaries
- sigset_t is now 64 bits. Having it be 128 bits was a mistake because
there's no reason to use that and it's only supported by FreeBSD. By
using the system word size, signal mask manipulation on Windows goes
very fast. Furthermore @asyncsignalsafe funcs have been rewritten on
Windows to take advantage of signal masking, now that it's much more
pleasant to use.
- All the overlapped i/o code on Windows has been rewritten for pretty
good signal and cancelation safety. We're now able to ensure overlap
data structures are cleaned up so long as you don't longjmp() out of
out of a signal handler that interrupted an i/o operation. Latencies
are also improved thanks to the removal of lots of "busy wait" code.
Waits should be optimal for everything except poll(), which shall be
the last and final demon we slay in the win32 i/o horror show.
- getrusage() on Windows is now able to report RUSAGE_CHILDREN as well
as RUSAGE_SELF, thanks to aggregation in the process manager thread.
The `cat` command now works properly, when run by itself on the bash
command prompt. It's working beautifully so far, and is only missing
a few keystrokes for clearing words and lines. Definitely works more
well than the one that ships with WIN32 :-)
Thanks to @autumnjolitz (in #876) the Cosmopolitan codebase is now
acquainted with Apple's outstanding ulock system calls which offer
something much closer to futexes than Grand Central Dispatch which
wasn't quite as good, since its wait function can't be interrupted
by signals (therefore necessitating a busy loop) and it also needs
semaphore objects to be created and freed. Even though ulock is an
internal Apple API, strictly speaking, the benefits of futexes are
so great that it's worth the risk for now especially since we have
the GCD implementation still as a quick escape hatch if it changes
Here's why this change is important for x86 XNU users. Cosmo has a
suboptimal polyfill when the operating system doesn't offer an API
that let's us implement futexes properly. Sadly we had to use that
on X86 XNU until now. The polyfill works using clock_nanosleep, to
poll the futex in a busy loop with exponential backoff. On XNU x86
clock_nanosleep suffers from us not being able to use a fast clock
gettime implementation, which had a compounding effect that's made
the polyfill function even more poorly. On X86 XNU we also need to
polyfill sched_yield() using select(), which made things even more
troublesome. Now that we have futexes we don't have any busy loops
anymore for both condition variables and thread joining so optimal
performance is attained. To demonstrate, consider these benchmarks
Before:
$ ./lockscale_test.com -b
consumed 38.8377 seconds real time and
0.087131 seconds cpu time
After:
$ ./lockscale_test.com -b
consumed 0.007955 seconds real time and
0.011515 seconds cpu time
Fixes#876
This reverts commit b01282e23e. Some tests
are broken. It's not clear how it'll impact metal yet. Let's revisit the
memory optimization benefits of this change again sometime soon.
This reduces the virtual memory usage of Emacs for me by 30%. We now
have a simpler implementation that uses read(), rather mmap()ing the
whole executable.
- Every unit test now passes on Apple Silicon. The final piece of this
puzzle was porting our POSIX threads cancelation support, since that
works differently on ARM64 XNU vs. AMD64. Our semaphore support on
Apple Silicon is also superior now compared to AMD64, thanks to the
grand central dispatch library which lets *NSYNC locks go faster.
- The Cosmopolitan runtime is now more stable, particularly on Windows.
To do this, thread local storage is mandatory at all runtime levels,
and the innermost packages of the C library is no longer being built
using ASAN. TLS is being bootstrapped with a 128-byte TIB during the
process startup phase, and then later on the runtime re-allocates it
either statically or dynamically to support code using _Thread_local.
fork() and execve() now do a better job cooperating with threads. We
can now check how much stack memory is left in the process or thread
when functions like kprintf() / execve() etc. call alloca(), so that
ENOMEM can be raised, reduce a buffer size, or just print a warning.
- POSIX signal emulation is now implemented the same way kernels do it
with pthread_kill() and raise(). Any thread can interrupt any other
thread, regardless of what it's doing. If it's blocked on read/write
then the killer thread will cancel its i/o operation so that EINTR can
be returned in the mark thread immediately. If it's doing a tight CPU
bound operation, then that's also interrupted by the signal delivery.
Signal delivery works now by suspending a thread and pushing context
data structures onto its stack, and redirecting its execution to a
trampoline function, which calls SetThreadContext(GetCurrentThread())
when it's done.
- We're now doing a better job managing locks and handles. On NetBSD we
now close semaphore file descriptors in forked children. Semaphores on
Windows can now be canceled immediately, which means mutexes/condition
variables will now go faster. Apple Silicon semaphores can be canceled
too. We're now using Apple's pthread_yield() funciton. Apple _nocancel
syscalls are now used on XNU when appropriate to ensure pthread_cancel
requests aren't lost. The MbedTLS library has been updated to support
POSIX thread cancelations. See tool/build/runitd.c for an example of
how it can be used for production multi-threaded tls servers. Handles
on Windows now leak less often across processes. All i/o operations on
Windows are now overlapped, which means file pointers can no longer be
inherited across dup() and fork() for the time being.
- We now spawn a thread on Windows to deliver SIGCHLD and wakeup wait4()
which means, for example, that posix_spawn() now goes 3x faster. POSIX
spawn is also now more correct. Like Musl, it's now able to report the
failure code of execve() via a pipe although our approach favors using
shared memory to do that on systems that have a true vfork() function.
- We now spawn a thread to deliver SIGALRM to threads when setitimer()
is used. This enables the most precise wakeups the OS makes possible.
- The Cosmopolitan runtime now uses less memory. On NetBSD for example,
it turned out the kernel would actually commit the PT_GNU_STACK size
which caused RSS to be 6mb for every process. Now it's down to ~4kb.
On Apple Silicon, we reduce the mandatory upstream thread size to the
smallest possible size to reduce the memory overhead of Cosmo threads.
The examples directory has a program called greenbean which can spawn
a web server on Linux with 10,000 worker threads and have the memory
usage of the process be ~77mb. The 1024 byte overhead of POSIX-style
thread-local storage is now optional; it won't be allocated until the
pthread_setspecific/getspecific functions are called. On Windows, the
threads that get spawned which are internal to the libc implementation
use reserve rather than commit memory, which shaves a few hundred kb.
- sigaltstack() is now supported on Windows, however it's currently not
able to be used to handle stack overflows, since crash signals are
still generated by WIN32. However the crash handler will still switch
to the alt stack, which is helpful in environments with tiny threads.
- Test binaries are now smaller. Many of the mandatory dependencies of
the test runner have been removed. This ensures many programs can do a
better job only linking the the thing they're testing. This caused the
test binaries for LIBC_FMT for example, to decrease from 200kb to 50kb
- long double is no longer used in the implementation details of libc,
except in the APIs that define it. The old code that used long double
for time (instead of struct timespec) has now been thoroughly removed.
- ShowCrashReports() is now much tinier in MODE=tiny. Instead of doing
backtraces itself, it'll just print a command you can run on the shell
using our new `cosmoaddr2line` program to view the backtrace.
- Crash report signal handling now works in a much better way. Instead
of terminating the process, it now relies on SA_RESETHAND so that the
default SIG_IGN behavior can terminate the process if necessary.
- Our pledge() functionality has now been fully ported to AARCH64 Linux.
This change fixes Cosmopolitan so it has fewer opinions about compiler
warnings. The whole repository had to be cleaned up to be buildable in
-Werror -Wall mode. This lets us benefit from things like strict const
checking. Some actual bugs might have been caught too.
- Get SIGWINCH working again on the New Technology
- Correctly handle O_NOFOLLOW in open() on Windows
- Implement synthetic umask() functionality on Windows
- Do a better job managing file execute access on Windows
- Fill in `st_uid` and `st_gid` with username hash on Windows
- Munge UNICODE control pictures into control codes on Windows
- Do a better job ensuring Windows console settings are restored
- Introduce KPRINTF_LOG environment variable to log kprintf to a file
This change has the insight that dwExitCode isn't an exit code but
rather should be used to pass the wait status. This lets us report
killing as a termination status, similar to UNIX. This change also
fixes the fact that exit(259) on Windows will break the parent due
way WIN32 is designed. We now work around that.
It turns out that NetBSD and OpenBSD, will let you have exit codes
beyond 255. This change will let you use them when it's possible.
- Remove PAGESIZE constant
- Fix realloc() documentation
- Fix ttyname_r() error reporting
- Make forking more reliable on Windows
- Make execvp() a few microseconds faster
- Make system() a few microseconds faster
- Tighten up the socket-related magic numbers
- Loosen restrictions on mmap() offset alignment
- Improve GetProgramExecutableName() with getenv("_")
- Use mkstemp() as basis for mktemp(), tmpfile(), tmpfd()
- Fix flakes in pthread_cancel_test, unix_test, fork_test
- Fix recently introduced futex stack overflow regression
- Let sockets be passed as stdio to subprocesses on Windows
- Improve security of bind() on Windows w/ SO_EXCLUSIVEADDRUSE
This change ports APE Loader to Linux AARCH64, so that Raspberry Pi
users can run programs like redbean, without the executable needing
to modify itself. Progress has also slipped into this change on the
issue of making progress better conforming to user expectations and
industry standards regarding which symbols we're allowed to declare
This change introduces new tests for `O_NONBLOCK` and `SOCK_NONBLOCK` to
confirm that non-blocking i/o is now working on all supported platforms,
including Windows. For example, you can now say on Windows, MacOS, etc.:
socket(AF_INET, SOCK_STREAM | SOCK_NONBLOCK, IPPROTO_TCP);
To create a non-blocking IPv4 TCP socket. Or you can enable non-blocking
i/o on an existing socket / pipe / etc. file descriptor by calling fcntl
fcntl(fd, F_SETFL, fcntl(fd, F_GETFL) | O_NONBLOCK);
This functionality is polyfilled on older Linux kernels too, e.g. RHEL5.
Now that fcntl() support is much better the FIOCLEX / FIONCLEX polyfills
for ioctl() have been removed since they're ugly non-POSIX diameond APIs
This change fixes a weakness in kprintf() that was causing Windows trace
tools to frequently crash.
- Fix handling of precision in hex float formatting
- Enhance the cocmd interpreter for system() and popen()
- Manually ran the Lua unit tests, which are now passing
- Let stdio i/o operations happen when file is in error state
- We're now saving and restoring xmm in ftrace out of paranoia
This change takes an entirely new approach to the incremental linking of
pkzip executables. The assets created by zipobj.com are now treated like
debug data. After a .com.dbg is compiled, fixupobj.com should be run, so
it can apply fixups to the offsets and move the zip directory to the end
of the file. Since debug data doesn't get objcopy'd, a new tool has been
introduced called zipcopy.com which should be run after objcopy whenever
a .com file is created. This is all automated by the `cosmocc` toolchain
which is rapidly becoming the new recommended approach.
This change also introduces the new C23 checked arithmetic macros.
This change improves the way internal APIs are being hidden behind the
`COSMO` define. The cosmo.h header will take care of defining that, so
that a separate define statement isn't needed. This change also does a
lot more to define which APIs are standard, and which belong to Cosmo.
This change integrates e58abc1110b335a3341e8ad5821ad8e3880d9bb2 from
https://github.com/ahgamut/musl-cross-make/ which fixes the issues we
were having with our C language extension for symbolic constants. This
change also performs some code cleanup and bug fixes to getaddrinfo().
It's now possible to compile projects like ncurses, readline and python
without needing to patch anything upstream, except maybe a line or two.
Pretty soon it should be possible to build a Linux distro on Cosmo.
In order to improve our chances of success building other open source
projects we shouldn't define APIs that'll lead any ./configure script
astray. For example:
- brk() and sbrk() can break mac/windows support
- syscall() is a superb way to break portability
- arch_prctl() is the greatest of all horror shows
- Work towards improving non-optimized build support
- Introduce MODE=zero which is -O0 without ASAN/UBSAN
- Use system GCC when ~/.cosmo.mk has USE_SYSTEM_TOOLCHAIN=1
- Have package.com check .privileged code doesn't call non-privileged
This change implements a new approach to function call logging, that's
based on the GCC flag: -fpatchable-function-entry. Read the commentary
in build/config.mk to learn how it works.
- Now using 10x better GCD semaphores
- We now generate Linux-like thread ids
- We now use fast system clock / sleep libraries
- The APE M1 loader now generates Linux-like stacks
This change progresses our AARCH64 support:
- The AARCH64 build and tests are now passing
- Add 128-bit floating-point support to printf()
- Fix clone() so it initializes cosmo's x28 TLS register
- Fix TLS memory layout issue with aarch64 _Alignas vars
- Revamp microbenchmarking tools so they work on aarch64
- Make some subtle improvements to aarch64 crash reporting
- Make kisdangerous() memory checks more accurate on aarch64
- Remove sys_open() since it's not available on Linux AARCH64
This change makes general improvements to Cosmo and Redbean:
- Introduce GetHostIsa() function in Redbean
- You can now feature check using pledge(0, 0)
- You can now feature check using unveil("",0)
- Refactor some more x86-specific asm comments
- Refactor and write docs for some libm functions
- Make the mmap() API behave more similar to Linux
- Fix WIFSIGNALED() which wrongly returned true for zero
- Rename some obscure cosmo keywords from noFOO to dontFOO
There's a new program named ape/ape-m1.c which will be used to build an
embeddable binary that can load ape and elf executables. The support is
mostly working so far, but still chasing down ABI issues.
- Utilities like pledge.com now build
- kprintf() will no longer balk at 48-bit addresses
- There's a new aarch64-dbg build mode that should work
- gc() and defer() are mostly pacified; avoid using them on aarch64
- THIRD_PART_STB now has Arm Neon intrinsics for fast image handling
* [metal] Copy program pages to extended memory at startup
* [metal] Reclaim base memory pages for later app use
* [metal] Load program pages beyond 1st 440 KiB to extended memory
o//examples/hellolua.com now runs correctly under QEMU (in
legacy BIOS mode).
* [metal] Place GDT in read/write segment
The CPU absolutely needs to alter the GDT when loading the
task register (via ltr). To account for this, I move the
GDT into a read/write data section. There is still a "rump"
read-only GDT in the text section that is used by the real
mode bootloader.
We also delay the loading of the task register (ltr) until
after the IDT and TSS are finally set up.
* [metal] Get examples/vga2.c serial output working for UEFI boot
* [metal] Get examples/vga2.c VGA output working for UEFI boot
* [metal] Allow munmap() to reclaim dynamically allocated pages
* Place TLS sections right after .text, not after embedded zip file
Co-authored-by: tkchia <tkchia-cosmo@gmx.com>
- ASAN memory morgue is now lockless
- Make C11 atomics header more portable
- Rewrote pthread keys support to be lockless
- Simplify Python's unicode table unpacking code
- Make crash report write(2) closer to being atomic
- Make it possible to strace/ftrace a single thread
- ASAN now checks nul-terminated strings fast and properly
- Windows fork() now restores TLS memory of calling thread
If threads are being used, then fork() will now acquire and release and
runtime locks so that fork() may be safely used from threads. This also
makes vfork() thread safe, because pthread mutexes will do nothing when
the process is a child of vfork(). More torture tests have been written
to confirm this all works like a charm. Additionally:
- Invent hexpcpy() api
- Rename nsync_malloc_() to kmalloc()
- Complete posix named semaphore implementation
- Make pthread_create() asynchronous signal safe
- Add rm, rmdir, and touch to command interpreter builtins
- Invent sigisprecious() and modify sigset functions to use it
- Add unit tests for posix_spawn() attributes and fix its bugs
One unresolved problem is the reclaiming of *NSYNC waiter memory in the
forked child processes, within apps which have threads waiting on locks
- SQLite file locking now works on Windows
- SQLite will now use fdatasync() on non-Apple platforms
- Fix Ctrl-C handler on Windows to not crash with TLS
- Signals now work in multithreaded apps on Windows
- fcntl() will now accurately report EINVAL errors
- fcntl() now has excellent --strace logging
- Token bucket replenish now go 100x faster
- *NSYNC cancellations now work on Windows
- Support closefrom() on NetBSD
