This change deletes mkfifo() so that GNU Make on Windows will work in
parallel mode using its pipe-based implementation. There's an example
called greenbean2 now, which shows how to build a scalable web server
for Windows with 10k+ threads. The accuracy of clock_nanosleep is now
significantly improved on Linux.
- We now serialize the file descriptor table when spawning / executing
processes on Windows. This means you can now inherit more stuff than
just standard i/o. It's needed by bash, which duplicates the console
to file descriptor #255. We also now do a better job serializing the
environment variables, so you're less likely to encounter E2BIG when
using your bash shell. We also no longer coerce environ to uppercase
- execve() on Windows now remotely controls its parent process to make
them spawn a replacement for itself. Then it'll be able to terminate
immediately once the spawn succeeds, without having to linger around
for the lifetime as a shell process for proxying the exit code. When
process worker thread running in the parent sees the child die, it's
given a handle to the new child, to replace it in the process table.
- execve() and posix_spawn() on Windows will now provide CreateProcess
an explicit handle list. This allows us to remove handle locks which
enables better fork/spawn concurrency, with seriously correct thread
safety. Other codebases like Go use the same technique. On the other
hand fork() still favors the conventional WIN32 inheritence approach
which can be a little bit messy, but is *controlled* by guaranteeing
perfectly clean slates at both the spawning and execution boundaries
- sigset_t is now 64 bits. Having it be 128 bits was a mistake because
there's no reason to use that and it's only supported by FreeBSD. By
using the system word size, signal mask manipulation on Windows goes
very fast. Furthermore @asyncsignalsafe funcs have been rewritten on
Windows to take advantage of signal masking, now that it's much more
pleasant to use.
- All the overlapped i/o code on Windows has been rewritten for pretty
good signal and cancelation safety. We're now able to ensure overlap
data structures are cleaned up so long as you don't longjmp() out of
out of a signal handler that interrupted an i/o operation. Latencies
are also improved thanks to the removal of lots of "busy wait" code.
Waits should be optimal for everything except poll(), which shall be
the last and final demon we slay in the win32 i/o horror show.
- getrusage() on Windows is now able to report RUSAGE_CHILDREN as well
as RUSAGE_SELF, thanks to aggregation in the process manager thread.
The `cat` command now works properly, when run by itself on the bash
command prompt. It's working beautifully so far, and is only missing
a few keystrokes for clearing words and lines. Definitely works more
well than the one that ships with WIN32 :-)
- This change fixes a bug that allowed unbuffered printf() output (to
streams like stderr) to be truncated. This regression was introduced
some time between now and the last release.
- POSIX specifies all functions as thread safe by default. This change
works towards cleaning up our use of the @threadsafe / @threadunsafe
documentation annotations to reflect that. The goal is (1) to use
@threadunsafe to document functions which POSIX say needn't be thread
safe, and (2) use @threadsafe to document functions that we chose to
implement as thread safe even though POSIX didn't mandate it.
- Tidy up the clock_gettime() implementation. We're now trying out a
cleaner approach to system call support that aims to maintain the
Linux errno convention as long as possible. This also fixes bugs that
existed previously, where the vDSO errno wasn't being translated
properly. The gettimeofday() system call is now a wrapper for
clock_gettime(), which reduces bloat in apps that use both.
- The recently-introduced improvements to the execute bit on Windows has
had bugs fixed. access(X_OK) on a directory on Windows now succeeds.
fstat() will now perform the MZ/#! ReadFile() operation correctly.
- Windows.h is no longer included in libc/isystem/, because it confused
PCRE's build system into thinking Cosmopolitan is a WIN32 platform.
Cosmo's Windows.h polyfill was never even really that good, since it
only defines a subset of the subset of WIN32 APIs that Cosmo defines.
- The setlongerjmp() / longerjmp() APIs are removed. While they're nice
APIs that are superior to the standardized setjmp / longjmp functions,
they weren't superior enough to not be dead code in the monorepo. If
you use these APIs, please file an issue and they'll be restored.
- The .com appending magic has now been removed from APE Loader.
- Improved async signal safety of read() particularly for longjmp()
- Started adding cancel cleanup handlers for locks / etc on Windows
- Make /dev/tty work better particularly for uses like `foo | less`
- Eagerly read console input into a linked list, so poll can signal
- Fix some libc definitional bugs, which configure scripts detected
This change removes our use of ENABLE_VIRTUAL_TERMINAL_INPUT (which
isn't very good) in favor of having read() translate Windows Console
input events to ANSI/XTERM sequences by hand. This makes it possible to
capture important keystrokes (e.g. ctrl-space) that weren't possible
before. Most importantly this change also removes the stdin/sigwinch
worker threads, which never really worked that well. Interactive TTY
sessions will now work reliably when a Cosmo process spawns or forks
another Cosmo process, e.g. unbourne.com launching emacs.com.
- Every unit test now passes on Apple Silicon. The final piece of this
puzzle was porting our POSIX threads cancelation support, since that
works differently on ARM64 XNU vs. AMD64. Our semaphore support on
Apple Silicon is also superior now compared to AMD64, thanks to the
grand central dispatch library which lets *NSYNC locks go faster.
- The Cosmopolitan runtime is now more stable, particularly on Windows.
To do this, thread local storage is mandatory at all runtime levels,
and the innermost packages of the C library is no longer being built
using ASAN. TLS is being bootstrapped with a 128-byte TIB during the
process startup phase, and then later on the runtime re-allocates it
either statically or dynamically to support code using _Thread_local.
fork() and execve() now do a better job cooperating with threads. We
can now check how much stack memory is left in the process or thread
when functions like kprintf() / execve() etc. call alloca(), so that
ENOMEM can be raised, reduce a buffer size, or just print a warning.
- POSIX signal emulation is now implemented the same way kernels do it
with pthread_kill() and raise(). Any thread can interrupt any other
thread, regardless of what it's doing. If it's blocked on read/write
then the killer thread will cancel its i/o operation so that EINTR can
be returned in the mark thread immediately. If it's doing a tight CPU
bound operation, then that's also interrupted by the signal delivery.
Signal delivery works now by suspending a thread and pushing context
data structures onto its stack, and redirecting its execution to a
trampoline function, which calls SetThreadContext(GetCurrentThread())
when it's done.
- We're now doing a better job managing locks and handles. On NetBSD we
now close semaphore file descriptors in forked children. Semaphores on
Windows can now be canceled immediately, which means mutexes/condition
variables will now go faster. Apple Silicon semaphores can be canceled
too. We're now using Apple's pthread_yield() funciton. Apple _nocancel
syscalls are now used on XNU when appropriate to ensure pthread_cancel
requests aren't lost. The MbedTLS library has been updated to support
POSIX thread cancelations. See tool/build/runitd.c for an example of
how it can be used for production multi-threaded tls servers. Handles
on Windows now leak less often across processes. All i/o operations on
Windows are now overlapped, which means file pointers can no longer be
inherited across dup() and fork() for the time being.
- We now spawn a thread on Windows to deliver SIGCHLD and wakeup wait4()
which means, for example, that posix_spawn() now goes 3x faster. POSIX
spawn is also now more correct. Like Musl, it's now able to report the
failure code of execve() via a pipe although our approach favors using
shared memory to do that on systems that have a true vfork() function.
- We now spawn a thread to deliver SIGALRM to threads when setitimer()
is used. This enables the most precise wakeups the OS makes possible.
- The Cosmopolitan runtime now uses less memory. On NetBSD for example,
it turned out the kernel would actually commit the PT_GNU_STACK size
which caused RSS to be 6mb for every process. Now it's down to ~4kb.
On Apple Silicon, we reduce the mandatory upstream thread size to the
smallest possible size to reduce the memory overhead of Cosmo threads.
The examples directory has a program called greenbean which can spawn
a web server on Linux with 10,000 worker threads and have the memory
usage of the process be ~77mb. The 1024 byte overhead of POSIX-style
thread-local storage is now optional; it won't be allocated until the
pthread_setspecific/getspecific functions are called. On Windows, the
threads that get spawned which are internal to the libc implementation
use reserve rather than commit memory, which shaves a few hundred kb.
- sigaltstack() is now supported on Windows, however it's currently not
able to be used to handle stack overflows, since crash signals are
still generated by WIN32. However the crash handler will still switch
to the alt stack, which is helpful in environments with tiny threads.
- Test binaries are now smaller. Many of the mandatory dependencies of
the test runner have been removed. This ensures many programs can do a
better job only linking the the thing they're testing. This caused the
test binaries for LIBC_FMT for example, to decrease from 200kb to 50kb
- long double is no longer used in the implementation details of libc,
except in the APIs that define it. The old code that used long double
for time (instead of struct timespec) has now been thoroughly removed.
- ShowCrashReports() is now much tinier in MODE=tiny. Instead of doing
backtraces itself, it'll just print a command you can run on the shell
using our new `cosmoaddr2line` program to view the backtrace.
- Crash report signal handling now works in a much better way. Instead
of terminating the process, it now relies on SA_RESETHAND so that the
default SIG_IGN behavior can terminate the process if necessary.
- Our pledge() functionality has now been fully ported to AARCH64 Linux.
The new asynchronous signal delivery technique is now also being used
for tkill(), raise(), etc. Many subtle issues have been addresesd. We
now signal handling on Windows that's remarkably similar to the POSIX
behaviors. However that's just across threads. We're lacking a way to
have the signal semantics work well, across multiple WIN32 processes.
The stdio reader thread now appears to be working recursively along
cosmopolitan subprocesses. For example, it's now possible to launch
vim.com from the unbourne.com bestline repl, thanks to hacks plus a
bug fix to select() timeouts.
- Polyfill readlink("foo/") dir check on Windows
- Support asynchronous signal delivery on Windows
- Restore Windows Console from execve() daisy chain
- Work around bug in AARCH64 Optimized Routines memcmp()
- Disable unbourne.com shell completion on Windows for now
- Don't always set virtual terminal input state on console
- Remove Musl Libc's unusual preservation of realpath("//")
- Make realpath() strongly link malloc() to pass configure test
- Delete cosh.com shell, now that unbourne.com works on Windows!
This change fixes Cosmopolitan so it has fewer opinions about compiler
warnings. The whole repository had to be cleaned up to be buildable in
-Werror -Wall mode. This lets us benefit from things like strict const
checking. Some actual bugs might have been caught too.
- Get SIGWINCH working again on the New Technology
- Correctly handle O_NOFOLLOW in open() on Windows
- Implement synthetic umask() functionality on Windows
- Do a better job managing file execute access on Windows
- Fill in `st_uid` and `st_gid` with username hash on Windows
- Munge UNICODE control pictures into control codes on Windows
- Do a better job ensuring Windows console settings are restored
- Introduce KPRINTF_LOG environment variable to log kprintf to a file
You can now play Super Mario Bros in CMD.EXE using Cosmopolitan! This is
thanks to a new worker thread that's spawned on Windows whenever any one
of poll(), select(), or ioctl(FIONREAD) is linked.
- Blocking read operations on the Windows Console can now EINTR
- Blocking read operations on Windows pipes now EINTR more reliably
- setitimer() will no longer be inherited across fork() on Windows
- It's now possible to use ECHO when the console is in raw mode
- The ECHOCTL flag now works correctly on the Windows Console
- The ICRNL flag now works correctly on the Windows Console
- pread() and pwrite() will now raise ESPIPE on Windows
- Opening /dev/tty on Windows is improved (untested)
- Overlapped I/O is now implemented in a better way
This change makes posix_spawn_test no longer flaky on Windows, by (1)
fixing a race condition in wait(), and (2) removing a misguided vfork
implementation which was letting Windows bypass pthread_atfork().
This change ports APE Loader to Linux AARCH64, so that Raspberry Pi
users can run programs like redbean, without the executable needing
to modify itself. Progress has also slipped into this change on the
issue of making progress better conforming to user expectations and
industry standards regarding which symbols we're allowed to declare
This change introduces new tests for `O_NONBLOCK` and `SOCK_NONBLOCK` to
confirm that non-blocking i/o is now working on all supported platforms,
including Windows. For example, you can now say on Windows, MacOS, etc.:
socket(AF_INET, SOCK_STREAM | SOCK_NONBLOCK, IPPROTO_TCP);
To create a non-blocking IPv4 TCP socket. Or you can enable non-blocking
i/o on an existing socket / pipe / etc. file descriptor by calling fcntl
fcntl(fd, F_SETFL, fcntl(fd, F_GETFL) | O_NONBLOCK);
This functionality is polyfilled on older Linux kernels too, e.g. RHEL5.
Now that fcntl() support is much better the FIOCLEX / FIONCLEX polyfills
for ioctl() have been removed since they're ugly non-POSIX diameond APIs
This change fixes a weakness in kprintf() that was causing Windows trace
tools to frequently crash.
This change makes some miracle modifications to the System Five system
call support, which lets us have safe, correct, and atomic handling of
thread cancellations. It all turned out to be cheaper than anticipated
because it wasn't necessary to modify the system call veneers. We were
able to encode the cancellability of each system call into the magnums
found in libc/sysv/syscalls.sh. Since cancellations are so waq, we are
also supporting a lovely Musl Libc mask feature for raising ECANCELED.
This change also found a few POSIX compliance bugs with errnos. Another
bug was discovered where, on Windows, pread() and pwrite() could modify
the file position in cases where ReadFile() returned an error e.g. when
seeking past the end of file. We also have more tests!
- Fix preadv() and pwritev() for old distros
- Introduce _npassert() and _unassert() macros
- Prove that file locks work properly on Windows
- Support fcntl(F_DUPFD_CLOEXEC) on more systems
This makes breaking changes to add underscores to many non-standard
function names provided by the c library. MODE=tiny is now tinier and
we now use smaller locks that are better for tiny apps in this mode.
Some headers have been renamed to be in the same folder as the build
package, so it'll be easier to know which build dependency is needed.
Certain old misguided interfaces have been removed. Intel intrinsics
headers are now listed in libc/isystem (but not in the amalgamation)
to help further improve open source compatibility. Header complexity
has also been reduced. Lastly, more shell scripts are now available.
- Get clone() working on FreeBSD
- Increase some Python build quotas
- Add more atomic builtins to chibicc
- Fix ASAN poisoning of alloca() memory
- Make MODE= mandatory link path tinier
- Improve the examples folder a little bit
- Start working on some more resource limits
- Make the linenoise auto-complete UI as good as GNU readline
- Update compile.com, avoiding AVX codegen on non-AVX systems
- Make sure empty path to syscalls like opendir raises ENOENT
- Correctly polyfill ENOENT vs. ENOTDIR on the New Technology
- Port bestline's paredit features to //third_party/linenoise
- Remove workarounds for RHEL 5.0 bugs that were fixed in 5.1
This change makes further effort towards improving our poll()
implementation on the New Technology. The stdin worker didn't work out
so well for Python so it's not being used for now. System call tracing
with the --strace flag should now be less noisy now on Windows unless
you modify the strace.internal.h defines to turn on some optional ones
that are most useful for debugging the system call wrappers.
- Fix bugs in kDos2Errno definition
- malloc() should now be thread safe
- Fix bug in rollup.com header generator
- Fix open(O_APPEND) on the New Technology
- Fix select() on the New Technology and test it
- Work towards refactoring i/o for thread safety
- Socket reads and writes on NT now poll for signals
- Work towards i/o completion ports on the New Technology
- Make read() and write() intermittently check for signals
- Blinkenlights keyboard i/o so much better on NT w/ poll()
- You can now poll() files and sockets at the same time on NT
- Fix bug in appendr() that manifests with dlmalloc footers off
- Improve i/o perf on New Technology
- Code cleanup on read() for New Technology
- Fix bad bug with dup() of socket on New Technology
- Clean up some more strace errors on New Technology
- Fix sigsuspend() on XNU
- Fix strsignal() on non-Linux
- Add unit tests for strsignal()
- Add unit tests for setitimer()
- Add unit tests for sigsuspend()
- Rewrite setitimer() for New Technology
- Rewrite nanosleep() for New Technology
- Polyfill SIGALRM on the New Technology
- select(0,0,0,0) on NT now calls pause()
- Remove some NTDLL calls that aren't needed
- Polyfill SA_NOCLDWAIT on the New Technology
- Polyfill SA_RESETHAND on the New Technology
- Polyfill sigprocmask() on the New Technology
- Polyfill SIGCHLD+SIG_IGN on the New Technology
- Polyfill SA_RESTART masking on the New Technology
- Deliver console signals from main thread on New Technology
- Document SA_RESTART behavior w/ @sarestartable / @norestart
- System call trace in MODE=dbg now prints inherited FDs and signal mask
- Update a couple unicode data files
- Disable strace during logger calls
- SQLite now uses pread() / pwrite()
- pread() past EOF on NT now returns 0
- Make the NT mmap() and fork() code elegant
- Give NT a big performance boost with memory
- Add many more mmap() tests to prove it works
redbean will now cleanup child processes properly. New accounting
information is available too, such as page faults and memory usage. The
way it works is Cosmopolitan Libc samples the process collection on
entry into read() and poll() to see if SIGCHLD needs to be raised.
This change also fixes an issue with chibicc /tmp cleanup. There was
also a regression in MODE=dbg because STL needed ASAN runtime support.
- Fix build flakes
- Polyfill SIGWINCH on Windows
- Fix an execve issue on Windows
- Make strerror show more information
- Improve cmd.exe setup/teardown on Windows
- Support bracketed paste mode in Blinkenlights
- Show keyboard shortcuts in Blinkenlights status bar
- Fixed copy_file_range() and copyfile() w/ zip filesystem
- Size optimize GetDosArgv() to keep life.com 12kb in size
- Improve Blinkenlights ability to load weird ELF executables
- Fix program_executable_name and add GetInterpreterExecutableName
- Make Python in tiny mode fail better if docstrings are requested
- Update Python test exclusions in tiny* modes such as tinylinux
- Add bulletproof unbreakable kprintf() troubleshooting function
- Remove "oldskool" keyword from ape.S for virus scanners
- Fix issue that caused backtraces to not print sometimes
- Improve Blinkenlights serial uart character i/o
- Make clock_gettime() not clobber errno on xnu
- Improve sha256 cpuid check for old computers
- Integrate some bestline linenoise fixes
- Show runit process names better in htop
- Remove SIGPIPE from ShowCrashReports()
- Make realpath() not clobber errno
- Avoid attaching GDB on non-Linux
- Improve img.com example
