This will help C++ code that uses exceptions to be tinier. For example,
this change shaves away 1000 lines of assembly code from LLVM's libcxx,
which is 0.7% of all assembly instructions in the entire library.
At least in neovim, `│vi:` is not recognized as a modeline because it
has no preceding whitespace. After fixing this, opening a file yields
an error because `net` is not an option. (`noet`, however, is.)
- We now serialize the file descriptor table when spawning / executing
processes on Windows. This means you can now inherit more stuff than
just standard i/o. It's needed by bash, which duplicates the console
to file descriptor #255. We also now do a better job serializing the
environment variables, so you're less likely to encounter E2BIG when
using your bash shell. We also no longer coerce environ to uppercase
- execve() on Windows now remotely controls its parent process to make
them spawn a replacement for itself. Then it'll be able to terminate
immediately once the spawn succeeds, without having to linger around
for the lifetime as a shell process for proxying the exit code. When
process worker thread running in the parent sees the child die, it's
given a handle to the new child, to replace it in the process table.
- execve() and posix_spawn() on Windows will now provide CreateProcess
an explicit handle list. This allows us to remove handle locks which
enables better fork/spawn concurrency, with seriously correct thread
safety. Other codebases like Go use the same technique. On the other
hand fork() still favors the conventional WIN32 inheritence approach
which can be a little bit messy, but is *controlled* by guaranteeing
perfectly clean slates at both the spawning and execution boundaries
- sigset_t is now 64 bits. Having it be 128 bits was a mistake because
there's no reason to use that and it's only supported by FreeBSD. By
using the system word size, signal mask manipulation on Windows goes
very fast. Furthermore @asyncsignalsafe funcs have been rewritten on
Windows to take advantage of signal masking, now that it's much more
pleasant to use.
- All the overlapped i/o code on Windows has been rewritten for pretty
good signal and cancelation safety. We're now able to ensure overlap
data structures are cleaned up so long as you don't longjmp() out of
out of a signal handler that interrupted an i/o operation. Latencies
are also improved thanks to the removal of lots of "busy wait" code.
Waits should be optimal for everything except poll(), which shall be
the last and final demon we slay in the win32 i/o horror show.
- getrusage() on Windows is now able to report RUSAGE_CHILDREN as well
as RUSAGE_SELF, thanks to aggregation in the process manager thread.
- This change fixes a bug that allowed unbuffered printf() output (to
streams like stderr) to be truncated. This regression was introduced
some time between now and the last release.
- POSIX specifies all functions as thread safe by default. This change
works towards cleaning up our use of the @threadsafe / @threadunsafe
documentation annotations to reflect that. The goal is (1) to use
@threadunsafe to document functions which POSIX say needn't be thread
safe, and (2) use @threadsafe to document functions that we chose to
implement as thread safe even though POSIX didn't mandate it.
- Tidy up the clock_gettime() implementation. We're now trying out a
cleaner approach to system call support that aims to maintain the
Linux errno convention as long as possible. This also fixes bugs that
existed previously, where the vDSO errno wasn't being translated
properly. The gettimeofday() system call is now a wrapper for
clock_gettime(), which reduces bloat in apps that use both.
- The recently-introduced improvements to the execute bit on Windows has
had bugs fixed. access(X_OK) on a directory on Windows now succeeds.
fstat() will now perform the MZ/#! ReadFile() operation correctly.
- Windows.h is no longer included in libc/isystem/, because it confused
PCRE's build system into thinking Cosmopolitan is a WIN32 platform.
Cosmo's Windows.h polyfill was never even really that good, since it
only defines a subset of the subset of WIN32 APIs that Cosmo defines.
- The setlongerjmp() / longerjmp() APIs are removed. While they're nice
APIs that are superior to the standardized setjmp / longjmp functions,
they weren't superior enough to not be dead code in the monorepo. If
you use these APIs, please file an issue and they'll be restored.
- The .com appending magic has now been removed from APE Loader.
- Invent openatemp() API
- Invent O_UNLINK open flag
- Introduce getenv_secure() API
- Remove `git pull` from cosmocc
- Fix utimes() when path is NULL
- Fix mktemp() to never return NULL
- Fix utimensat() UTIME_OMIT on XNU
- Improve utimensat() code for RHEL5
- Turn `argv[0]` C:/ to /C/ on Windows
- Introduce tmpnam() and tmpnam_r() APIs
- Fix more const issues with internal APIs
- Permit utimes() on WIN32 in O_RDONLY mode
- Fix fdopendir() to check fd is a directory
- Fix recent crash regression in landlock make
- Fix futimens(AT_FDCWD, NULL) to return EBADF
- Use workaround so `make -j` doesn't fork bomb
- Rename dontdiscard to __wur (just like glibc)
- Fix st_size for WIN32 symlinks containing UTF-8
- Introduce stdio ext APIs needed by GNU coreutils
- Fix lstat() on WIN32 for symlinks to directories
- Move some constants from normalize.inc to limits.h
- Fix segv with memchr() and memcmp() overlapping page
- Implement POSIX fflush() behavior for reader streams
- Implement AT_SYMLINK_NOFOLLOW for utimensat() on WIN32
- Don't change read-only status of existing files on WIN32
- Correctly handle `0x[^[:xdigit:]]` case in strtol() functions
- Introduce ualarm() function
- Make rename() report EISEMPTY on Windows
- Always raise EINVAL upon open(O_RDONLY|O_TRUNC)
- Add macro so ./configure will detect SOCK_CLOEXEC
- Fix O_TRUNC without O_CREAT not working on Windows
- Let fcntl(F_SETFL) change O_APPEND status on Windows
- Make sure pwrite() / pread() report ESPIPE on sockets
- Raise ESPIPE on Windows when pwrite() is used on pipe
- Properly compute O_APPEND CreateFile() flags on Windows
- Don't require O_DIRECTORY to open directories on Windows
- Fix more instances of Windows reporting EISDIR and ENOTDIR
- Normalize EFTYPE and EMLINK to ELOOP on NetBSD and FreeBSD
- Make unlink() / rmdir() work on read-only files on Windows
- Validate UTF-8 on Windows paths to fix bug with overlong NUL
- Always print signal name to stderr when crashing due to SIG_DFL
- Fix Windows bug where denormalized paths >260 chars didn't work
- Block signals on BSDs when thread exits before trashing its own stack
- Get SIGWINCH working again on the New Technology
- Correctly handle O_NOFOLLOW in open() on Windows
- Implement synthetic umask() functionality on Windows
- Do a better job managing file execute access on Windows
- Fill in `st_uid` and `st_gid` with username hash on Windows
- Munge UNICODE control pictures into control codes on Windows
- Do a better job ensuring Windows console settings are restored
- Introduce KPRINTF_LOG environment variable to log kprintf to a file
This change improves the dirstream library in a lot of respects,
especially for /zip/... files. Also turn off MAP_STACK on Aarch64
because Qemu seems to implement it differently than Linux and it's
probably responsible for a lot of mysterious crashes.
This way complex runtime features (e.g. ftrace, symbol tables) can
always yoink zipos support. This is important now that apelink.com
automates embedding symbol tables for multiple cpus.
- Remove PAGESIZE constant
- Fix realloc() documentation
- Fix ttyname_r() error reporting
- Make forking more reliable on Windows
- Make execvp() a few microseconds faster
- Make system() a few microseconds faster
- Tighten up the socket-related magic numbers
- Loosen restrictions on mmap() offset alignment
- Improve GetProgramExecutableName() with getenv("_")
- Use mkstemp() as basis for mktemp(), tmpfile(), tmpfd()
- Fix flakes in pthread_cancel_test, unix_test, fork_test
- Fix recently introduced futex stack overflow regression
- Let sockets be passed as stdio to subprocesses on Windows
- Improve security of bind() on Windows w/ SO_EXCLUSIVEADDRUSE
This change ports APE Loader to Linux AARCH64, so that Raspberry Pi
users can run programs like redbean, without the executable needing
to modify itself. Progress has also slipped into this change on the
issue of making progress better conforming to user expectations and
industry standards regarding which symbols we're allowed to declare
This change takes an entirely new approach to the incremental linking of
pkzip executables. The assets created by zipobj.com are now treated like
debug data. After a .com.dbg is compiled, fixupobj.com should be run, so
it can apply fixups to the offsets and move the zip directory to the end
of the file. Since debug data doesn't get objcopy'd, a new tool has been
introduced called zipcopy.com which should be run after objcopy whenever
a .com file is created. This is all automated by the `cosmocc` toolchain
which is rapidly becoming the new recommended approach.
This change also introduces the new C23 checked arithmetic macros.
- Utilities like pledge.com now build
- kprintf() will no longer balk at 48-bit addresses
- There's a new aarch64-dbg build mode that should work
- gc() and defer() are mostly pacified; avoid using them on aarch64
- THIRD_PART_STB now has Arm Neon intrinsics for fast image handling
- Exhaustively document cancellation points
- Rename SIGCANCEL to SIGTHR just like BSDs
- Further improve POSIX thread cancellations
- Ensure asynchronous cancellations work correctly
- Elevate the quality of getrandom() and getentropy()
- Make futexes cancel correctly on OpenBSD 6.x and 7.x
- Add reboot.com and shutdown.com to examples directory
- Remove underscore prefix from awesome timespec_*() APIs
- Create assertions that help verify our cancellation points
- Remove bad timespec APIs (cmp generalizes eq/ne/gt/gte/lt/lte)
This change makes some miracle modifications to the System Five system
call support, which lets us have safe, correct, and atomic handling of
thread cancellations. It all turned out to be cheaper than anticipated
because it wasn't necessary to modify the system call veneers. We were
able to encode the cancellability of each system call into the magnums
found in libc/sysv/syscalls.sh. Since cancellations are so waq, we are
also supporting a lovely Musl Libc mask feature for raising ECANCELED.
- ASAN memory morgue is now lockless
- Make C11 atomics header more portable
- Rewrote pthread keys support to be lockless
- Simplify Python's unicode table unpacking code
- Make crash report write(2) closer to being atomic
- Make it possible to strace/ftrace a single thread
- ASAN now checks nul-terminated strings fast and properly
- Windows fork() now restores TLS memory of calling thread
This change also found a few POSIX compliance bugs with errnos. Another
bug was discovered where, on Windows, pread() and pwrite() could modify
the file position in cases where ReadFile() returned an error e.g. when
seeking past the end of file. We also have more tests!
This change also introduces partial faccessat() support for zipos and
makes some slight breaking changes in errno results. close() is fixed
to use `EBADF` rather than `EINVAL` and we're now using `ENOTSUP` not
`EOPNOTSUPP` to indicate that zipos doesn't support a system call yet
This makes breaking changes to add underscores to many non-standard
function names provided by the c library. MODE=tiny is now tinier and
we now use smaller locks that are better for tiny apps in this mode.
Some headers have been renamed to be in the same folder as the build
package, so it'll be easier to know which build dependency is needed.
Certain old misguided interfaces have been removed. Intel intrinsics
headers are now listed in libc/isystem (but not in the amalgamation)
to help further improve open source compatibility. Header complexity
has also been reduced. Lastly, more shell scripts are now available.
- Introduce __assert_disable global
- Improve strsignal() thread safety
- Make system call tracing thread safe
- Fix SO_RCVTIMEO / SO_SNDTIMEO on Windows
- Refactor DescribeFoo() functions into one place
- Fix fork() on Windows when TLS and MAP_STACK exist
- Round upwards in setsockopt(SO_RCVTIMEO) on Windows
- Disable futexes on OpenBSD which seem extremely broken
- Implement a better kludge for monotonic time on Windows
This change hardens the code for opening /zip/ files using the system
call interface. Thread safety and signal safety has been improved for
file descriptors in general. We now document fixed addresses that are
needed for low level allocations.
- Get threads working on NetBSD
- Get threads working on OpenBSD
- Fix Emacs config for Emacs v28
- Improve --strace logging of sigset_t
- Improve --strace logging of struct stat
- Improve memory safety of DescribeThing functions
- Refactor auto stack allocation into LIBC_RUNTIME
- Introduce shell.com example which works on Windows
- Refactor __strace_thing into DescribeThing functions
- Document the CHECK macros and improve them in NDEBUG mode
- Rewrite MAP_STACK so it uses FreeBSD behavior across platforms
- Deprecate and discourage the use of MAP_GROWSDOWN (it's weird)
- Improve serialization
- Add Benchmark() API to redbean
- Refactor UNIX API to be assert() friendly
- Make the redbean Lua REPL print data structures
- Fix recent regressions in linenoise reverse search
- Add -i flag so redbean can be a language interpreter
- Improve i/o perf on New Technology
- Code cleanup on read() for New Technology
- Fix bad bug with dup() of socket on New Technology
- Clean up some more strace errors on New Technology
This is similar to the --ftrace (c function call trace) flag, except
it's less noisy since it only logs system calls to stderr. Having this
flag is valuable because (1) system call tracing tells us a lot about
the behavior of complex programs and (2) it's usually very hard to get
system call tracing on various operating systems, e.g. strace, ktrace,
dtruss, truss, nttrace, etc. Especially on Apple platforms where even
with the special boot trick, debuggers still aren't guaranteed to work.
make -j8 o//examples
o//examples/hello.com --strace
This is enabled by default in MODE=, MODE=opt, and MODE=dbg. In MODE=dbg
extra information will be printed.
make -j8 MODE=dbg o/dbg/examples
o/dbg/examples/hello.com --strace |& less
This change also changes:
- Rename IsText() → _istext()
- Rename IsUtf8() → _isutf8()
- Fix madvise() on Windows NT
- Fix empty string case of inet_ntop()
- vfork() wrapper now saves and restores errno
- Update xsigaction() to yoink syscall support
- Python static hello world now 1.8mb
- Python static fully loaded now 10mb
- Python HTTPS client now uses MbedTLS
- Python REPL now completes import stmts
- Increase stack size for Python for now
- Begin synthesizing posixpath and ntpath
- Restore Python \N{UNICODE NAME} support
- Restore Python NFKD symbol normalization
- Add optimized code path for Intel SHA-NI
- Get more Python unit tests passing faster
- Get Python help() pagination working on NT
- Python hashlib now supports MbedTLS PBKDF2
- Make memcpy/memmove/memcmp/bcmp/etc. faster
- Add Mersenne Twister and Vigna to LIBC_RAND
- Provide privileged __printf() for error code
- Fix zipos opendir() so that it reports ENOTDIR
- Add basic chmod() implementation for Windows NT
- Add Cosmo's best functions to Python cosmo module
- Pin function trace indent depth to that of caller
- Show memory diagram on invalid access in MODE=dbg
- Differentiate stack overflow on crash in MODE=dbg
- Add stb_truetype and tools for analyzing font files
- Upgrade to UNICODE 13 and reduce its binary footprint
- COMPILE.COM now logs resource usage of build commands
- Start implementing basic poll() support on bare metal
- Set getauxval(AT_EXECFN) to GetModuleFileName() on NT
- Add descriptions to strerror() in non-TINY build modes
- Add COUNTBRANCH() macro to help with micro-optimizations
- Make error / backtrace / asan / memory code more unbreakable
- Add fast perfect C implementation of μ-Law and a-Law audio codecs
- Make strtol() functions consistent with other libc implementations
- Improve Linenoise implementation (see also github.com/jart/bestline)
- COMPILE.COM now suppresses stdout/stderr of successful build commands
The ZIP filesystem has a breaking change. You now need to use /zip/ to
open() / opendir() / etc. assets within the ZIP structure of your APE
binary, instead of the previous convention of using zip: or zip! URIs.
This is needed because Python likes to use absolute paths, and having
ZIP paths encoded like URIs simply broke too many things.
Many more system calls have been updated to be able to operate on ZIP
files and file descriptors. In particular fcntl() and ioctl() since
Python would do things like ask if a ZIP file is a terminal and get
confused when the old implementation mistakenly said yes, because the
fastest way to guarantee native file descriptors is to dup(2). This
change also improves the async signal safety of zipos and ensures it
doesn't maintain any open file descriptors beyond that which the user
has opened.
This change makes a lot of progress towards adding magic numbers that
are specific to platforms other than Linux. The philosophy here is that,
if you use an operating system like FreeBSD, then you should be able to
take advantage of FreeBSD exclusive features, even if we don't polyfill
them on other platforms. For example, you can now open() a file with the
O_VERIFY flag. If your program runs on other platforms, then Cosmo will
automatically set O_VERIFY to zero. This lets you safely use it without
the need for #ifdef or ifstatements which detract from readability.
One of the blindspots of the ASAN memory hardening we use to offer Rust
like assurances has always been that memory passed to the kernel via
system calls (e.g. writev) can't be checked automatically since the
kernel wasn't built with MODE=asan. This change makes more progress
ensuring that each system call will verify the soundness of memory
before it's passed to the kernel. The code for doing these checks is
fast, particularly for buffers, where it can verify 64 bytes a cycle.
- Correct O_LOOP definition on NT
- Introduce program_executable_name
- Add ASAN guards to more system calls
- Improve termios compatibility with BSDs
- Fix bug in Windows auxiliary value encoding
- Add BSD and XNU specific errnos and open flags
- Add check to ensure build doesn't talk to internet
- Polyfill ucontext_t on FreeBSD/OpenBSD/NetBSD
- Add tests confirming signals can edit CPU state
- Work towards supporting ZIP filesystem on bare metal
- Add more tinymath unit tests for POSIX conformance
- Add X87 and SSE status flags to crash report
- Fix some bugs in blinkenlights
- Fix llvm build breakage
We always favor calling functions like openat(), fstatat(), etc. because
Linux, XNU, FreeBSD, and OpenBSD all elected to support them, while some
systems like Android love them so much, that they stopped supporting the
old interfaces.
This change ensures that when dirfd is actually a dirfd and not AT_FDCWD
we'll do the right thing on Windows NT. We use an API that's been around
since Vista to accomplish that.
This change also adds exponential backoff to chdir() on Windows since it
seems almost as flaky on Windows 7 as the rmdir() function.
I wanted a tiny scriptable meltdown proof way to run userspace programs
and visualize how program execution impacts memory. It helps to explain
how things like Actually Portable Executable works. It can show you how
the GCC generated code is going about manipulating matrices and more. I
didn't feel fully comfortable with Qemu and Bochs because I'm not smart
enough to understand them. I wanted something like gVisor but with much
stronger levels of assurances. I wanted a single binary that'll run, on
all major operating systems with an embedded GPL barrier ZIP filesystem
that is tiny enough to transpile to JavaScript and run in browsers too.
https://justine.storage.googleapis.com/emulator625.mp4
