At least in neovim, `│vi:` is not recognized as a modeline because it
has no preceding whitespace. After fixing this, opening a file yields
an error because `net` is not an option. (`noet`, however, is.)
- We now serialize the file descriptor table when spawning / executing
processes on Windows. This means you can now inherit more stuff than
just standard i/o. It's needed by bash, which duplicates the console
to file descriptor #255. We also now do a better job serializing the
environment variables, so you're less likely to encounter E2BIG when
using your bash shell. We also no longer coerce environ to uppercase
- execve() on Windows now remotely controls its parent process to make
them spawn a replacement for itself. Then it'll be able to terminate
immediately once the spawn succeeds, without having to linger around
for the lifetime as a shell process for proxying the exit code. When
process worker thread running in the parent sees the child die, it's
given a handle to the new child, to replace it in the process table.
- execve() and posix_spawn() on Windows will now provide CreateProcess
an explicit handle list. This allows us to remove handle locks which
enables better fork/spawn concurrency, with seriously correct thread
safety. Other codebases like Go use the same technique. On the other
hand fork() still favors the conventional WIN32 inheritence approach
which can be a little bit messy, but is *controlled* by guaranteeing
perfectly clean slates at both the spawning and execution boundaries
- sigset_t is now 64 bits. Having it be 128 bits was a mistake because
there's no reason to use that and it's only supported by FreeBSD. By
using the system word size, signal mask manipulation on Windows goes
very fast. Furthermore @asyncsignalsafe funcs have been rewritten on
Windows to take advantage of signal masking, now that it's much more
pleasant to use.
- All the overlapped i/o code on Windows has been rewritten for pretty
good signal and cancelation safety. We're now able to ensure overlap
data structures are cleaned up so long as you don't longjmp() out of
out of a signal handler that interrupted an i/o operation. Latencies
are also improved thanks to the removal of lots of "busy wait" code.
Waits should be optimal for everything except poll(), which shall be
the last and final demon we slay in the win32 i/o horror show.
- getrusage() on Windows is now able to report RUSAGE_CHILDREN as well
as RUSAGE_SELF, thanks to aggregation in the process manager thread.
- This change fixes a bug that allowed unbuffered printf() output (to
streams like stderr) to be truncated. This regression was introduced
some time between now and the last release.
- POSIX specifies all functions as thread safe by default. This change
works towards cleaning up our use of the @threadsafe / @threadunsafe
documentation annotations to reflect that. The goal is (1) to use
@threadunsafe to document functions which POSIX say needn't be thread
safe, and (2) use @threadsafe to document functions that we chose to
implement as thread safe even though POSIX didn't mandate it.
- Tidy up the clock_gettime() implementation. We're now trying out a
cleaner approach to system call support that aims to maintain the
Linux errno convention as long as possible. This also fixes bugs that
existed previously, where the vDSO errno wasn't being translated
properly. The gettimeofday() system call is now a wrapper for
clock_gettime(), which reduces bloat in apps that use both.
- The recently-introduced improvements to the execute bit on Windows has
had bugs fixed. access(X_OK) on a directory on Windows now succeeds.
fstat() will now perform the MZ/#! ReadFile() operation correctly.
- Windows.h is no longer included in libc/isystem/, because it confused
PCRE's build system into thinking Cosmopolitan is a WIN32 platform.
Cosmo's Windows.h polyfill was never even really that good, since it
only defines a subset of the subset of WIN32 APIs that Cosmo defines.
- The setlongerjmp() / longerjmp() APIs are removed. While they're nice
APIs that are superior to the standardized setjmp / longjmp functions,
they weren't superior enough to not be dead code in the monorepo. If
you use these APIs, please file an issue and they'll be restored.
- The .com appending magic has now been removed from APE Loader.
- Improved async signal safety of read() particularly for longjmp()
- Started adding cancel cleanup handlers for locks / etc on Windows
- Make /dev/tty work better particularly for uses like `foo | less`
- Eagerly read console input into a linked list, so poll can signal
- Fix some libc definitional bugs, which configure scripts detected
The new asynchronous signal delivery technique is now also being used
for tkill(), raise(), etc. Many subtle issues have been addresesd. We
now signal handling on Windows that's remarkably similar to the POSIX
behaviors. However that's just across threads. We're lacking a way to
have the signal semantics work well, across multiple WIN32 processes.
This change takes an entirely new approach to the incremental linking of
pkzip executables. The assets created by zipobj.com are now treated like
debug data. After a .com.dbg is compiled, fixupobj.com should be run, so
it can apply fixups to the offsets and move the zip directory to the end
of the file. Since debug data doesn't get objcopy'd, a new tool has been
introduced called zipcopy.com which should be run after objcopy whenever
a .com file is created. This is all automated by the `cosmocc` toolchain
which is rapidly becoming the new recommended approach.
This change also introduces the new C23 checked arithmetic macros.
- Exhaustively document cancellation points
- Rename SIGCANCEL to SIGTHR just like BSDs
- Further improve POSIX thread cancellations
- Ensure asynchronous cancellations work correctly
- Elevate the quality of getrandom() and getentropy()
- Make futexes cancel correctly on OpenBSD 6.x and 7.x
- Add reboot.com and shutdown.com to examples directory
- Remove underscore prefix from awesome timespec_*() APIs
- Create assertions that help verify our cancellation points
- Remove bad timespec APIs (cmp generalizes eq/ne/gt/gte/lt/lte)
This change makes some miracle modifications to the System Five system
call support, which lets us have safe, correct, and atomic handling of
thread cancellations. It all turned out to be cheaper than anticipated
because it wasn't necessary to modify the system call veneers. We were
able to encode the cancellability of each system call into the magnums
found in libc/sysv/syscalls.sh. Since cancellations are so waq, we are
also supporting a lovely Musl Libc mask feature for raising ECANCELED.
This change includes a fix to Fetch() where an out of bounds memory read
could happen, when the reverse proxied endpoint omits the content-length
header. This caused a bunch of NUL chars to appear on TurfWar's /statusz
since it wouldn't actually overrun the buffer, and if it did it would've
been caught by MODE=asan builds.
- ASAN memory morgue is now lockless
- Make C11 atomics header more portable
- Rewrote pthread keys support to be lockless
- Simplify Python's unicode table unpacking code
- Make crash report write(2) closer to being atomic
- Make it possible to strace/ftrace a single thread
- ASAN now checks nul-terminated strings fast and properly
- Windows fork() now restores TLS memory of calling thread
This change improves copy_file_range(), sendfile(), splice(), openpty(),
closefrom(), close_range(), fadvise() and posix_fadvise() in addition to
writing tests that confirm things like errno and seeking behavior across
platforms. We now less aggressively polyfill behavior with some of these
functions when the platform support isn't available. Please see:
https://justine.lol/cosmopolitan/functions.html
This makes breaking changes to add underscores to many non-standard
function names provided by the c library. MODE=tiny is now tinier and
we now use smaller locks that are better for tiny apps in this mode.
Some headers have been renamed to be in the same folder as the build
package, so it'll be easier to know which build dependency is needed.
Certain old misguided interfaces have been removed. Intel intrinsics
headers are now listed in libc/isystem (but not in the amalgamation)
to help further improve open source compatibility. Header complexity
has also been reduced. Lastly, more shell scripts are now available.
- Polyfill pselect() on Windows
- Add -O NOFILE flag to pledge.com
- Polyfill ppoll() on NetBSD, XNU, and Windows
- Support negative numbers and errno in sizetol()
- Add .RSS, .NOFILE, and .MAXCORE to Landlock Make
- Fix issue with .PLEDGE preventing touching of output files
- Add __watch() function (like ftrace) for logging memory changes
- Introduce __assert_disable global
- Improve strsignal() thread safety
- Make system call tracing thread safe
- Fix SO_RCVTIMEO / SO_SNDTIMEO on Windows
- Refactor DescribeFoo() functions into one place
- Fix fork() on Windows when TLS and MAP_STACK exist
- Round upwards in setsockopt(SO_RCVTIMEO) on Windows
- Disable futexes on OpenBSD which seem extremely broken
- Implement a better kludge for monotonic time on Windows
This change turns symbol table compression back on using Puff, which
noticeably reduces the size of programs like redbean and Python. The
redbean web server receives some minor API additions for controlling
things like SSL in addition to filling gaps in the documentation.
- Get threads working on NetBSD
- Get threads working on OpenBSD
- Fix Emacs config for Emacs v28
- Improve --strace logging of sigset_t
- Improve --strace logging of struct stat
- Improve memory safety of DescribeThing functions
- Refactor auto stack allocation into LIBC_RUNTIME
- Introduce shell.com example which works on Windows
- Refactor __strace_thing into DescribeThing functions
- Document the CHECK macros and improve them in NDEBUG mode
- Rewrite MAP_STACK so it uses FreeBSD behavior across platforms
- Deprecate and discourage the use of MAP_GROWSDOWN (it's weird)
- Expand redbean UNIX module
- Expand redbean documentation
- Ensure Lua copyright is embedded in binary
- Increase the PATH_MAX limit especially on NT
- Use column major sorting for linenoise completions
- Fix some suboptimalities in redbean's new UNIX API
- Figured out right flags for Multics newline in raw mode
- Fix a regression with the previous change that broke redbean
- Add chroot(), resource limit, seccomp, and other stuff to redbean
- Write lots and lots of documentation
- Iron out more system call issues
You can now interact with the global web server state on the command
line, which the web server is running. This supports Emacs shortcuts
with history, readline parity, <tab> completions, plus hints. Enjoy!
