This change ports APE Loader to Linux AARCH64, so that Raspberry Pi
users can run programs like redbean, without the executable needing
to modify itself. Progress has also slipped into this change on the
issue of making progress better conforming to user expectations and
industry standards regarding which symbols we're allowed to declare
This change also incorporates more bug fixes and improvements to a wide
variety of small things. For example this fixes#860 so Windows console
doesn't get corrupted after exit. An system stack memory map issue with
aarch64 has been fixed. We no longer use O_NONBLOCK on AF_UNIX sockets.
Crash reports on Arm64 will now demangle C++ symbols, even when c++filt
isn't available. Most importantly the Apple M1 version of APE Loader is
brought up to date by this change. A prebuilt unsigned binary for it is
being included in build/bootstrap/. One more thing: retrieving the term
dimensions under --strace was causing the stack to become corrupted and
now that's been solved too. PSS: We're now including an ELF PT_NOTE for
APE in the binaries we build, that has the APE Loader version.
This version has better error messages and safety checks. It supports
loading static position-independent executables. It correctly handles
more kinds of weird ELF program header layouts. A force flag has been
added to avoid system execve(). Finally the longstanding misalignment
with our ELF PT_NOTE section has been addressed.
- compile.com now polyfills -march=native which gcc/clang removed
- Guarantee zero Windows code is linked into non-Windows binaries
- MODE=tinylinux binaries are now back to being as tiny as ~4kb
- Improve the runtime's stack allocation / alignment hack
- GitHub Actions now tests Linux modes for assurance
This change (1) upgrades to OpenBSD's newer kernel ABIs, and (2)
modifies APE to have a read-only data segment. Doing this required
creating APE Loader v1.1, which is backwards and forwards compatible
with the previous version.
If you've run the following commands in the past to install your APE
Loader systemwide, then you need to run them again. Ad-hoc installations
shouldn't be impacted. It's also recommended that APE binaries be remade
after upgrading, since they embed old versions of the APE Loader.
ape/apeuninstall.sh
ape/apeinstall.sh
This change does more than just fix OpenBSD. The new loader is smarter
and more reliable. We're now able create much tinier ELF and Mach-O data
structures than we could before. Both APE Loader and execvpe() will now
normalize ambiguous argv[0] resolution the same way as the UNIX shell.
Badness with TLS linkage has been solved.
Fixes#826
This change integrates e58abc1110b335a3341e8ad5821ad8e3880d9bb2 from
https://github.com/ahgamut/musl-cross-make/ which fixes the issues we
were having with our C language extension for symbolic constants. This
change also performs some code cleanup and bug fixes to getaddrinfo().
It's now possible to compile projects like ncurses, readline and python
without needing to patch anything upstream, except maybe a line or two.
Pretty soon it should be possible to build a Linux distro on Cosmo.
This is an official tagged version. The 1.1 version used earlier was
informal. Formal versions will always have major.minor.patch going
forward. See https://github.com/jart/blink/tags 1.0.0 coming soon.
Your APE binaries will now run on eight hardware architectures. The
tradeoff is this change adds about 800kb of bloat to the executable
which to be fair is still more than half as small as Go hello world
Your APE shell script extracts an embedded build of Blink, based on
`$(uname -m)`. The Blink binaries are statically-linked (manylinux)
which means, they'll run on every distro's stock install, including
Apple M1's that haven't enabled Rosetta. Blink's emulation has been
designed to be nearly as fast as Rosetta, using a JIT technique for
faster startup time. Blink has also been tested more thoroughly, w/
emulating Cosmopolitan software, since we're the ones who wrote it.
* [metal] Copy program pages to extended memory at startup
* [metal] Reclaim base memory pages for later app use
* [metal] Load program pages beyond 1st 440 KiB to extended memory
o//examples/hellolua.com now runs correctly under QEMU (in
legacy BIOS mode).
* [metal] Place GDT in read/write segment
The CPU absolutely needs to alter the GDT when loading the
task register (via ltr). To account for this, I move the
GDT into a read/write data section. There is still a "rump"
read-only GDT in the text section that is used by the real
mode bootloader.
We also delay the loading of the task register (ltr) until
after the IDT and TSS are finally set up.
* [metal] Get examples/vga2.c serial output working for UEFI boot
* [metal] Get examples/vga2.c VGA output working for UEFI boot
* [metal] Allow munmap() to reclaim dynamically allocated pages
* Place TLS sections right after .text, not after embedded zip file
Co-authored-by: tkchia <tkchia-cosmo@gmx.com>
Files beginning with "MZqFpD" are Actually Portable Executables,
which have a printf statement in the first 4096 bytes with octal
codes that specify the ELF header. APE also specifies `jartsr='`
as an alternative prefix, intended for binaries that do not want
to be identified as Windows executables. Like the \177ELF magic,
all these prefixes decode as x86 jump instructions that could be
used for 16-bit bootloaders or 32-bit / 64-bit flat executables.
Most importantly they provide a fallback path for Thompson shell
copmatible command interpreters, which do not require a shebang,
e.g. bash, zsh, fish, bourne, almquist, etc. Please note that in
order to meet the requirements of POSIX.1, the single quote must
be followed by a newline character, before any null bytes occur.
See also: https://www.austingroupbugs.net/view.php?id=1250
- Invent iso8601us() for faster timestamps
- Improve --strace descriptions of sigset_t
- Rebuild the Landlock Make bootstrap binary
- Introduce MODE=sysv for non-Windows builds
- Permit OFD fcntl() locks under pledge(flock)
- redbean can now protect your kernel from ddos
- Have vfork() fallback to sys_fork() not fork()
- Change kmalloc() to not die when out of memory
- Improve documentation for some termios functions
- Rewrite putenv() and friends to conform to POSIX
- Fix linenoise + strace verbosity issue on Windows
- Fix regressions in our ability to show backtraces
- Change redbean SetHeader() to no-op if value is nil
- Improve fcntl() so SQLite locks work in non-WAL mode
- Remove some unnecessary work during fork() on Windows
- Create redbean-based SSL reverse proxy for IPv4 TurfWar
- Fix ape/apeinstall.sh warning when using non-bash shells
- Add ProgramTrustedIp(), and IsTrustedIp() APIs to redbean
- Support $PWD, $UID, $GID, and $EUID in command interpreter
- Introduce experimental JTqFpD APE prefix for non-Windows builds
- Invent blackhole daemon for firewalling IP addresses via UNIX named socket
- Add ProgramTokenBucket(), AcquireToken(), and CountTokens() APIs to redbean
- use PAGE_RSRV bit (originally only for blinkenlights),
rather than PAGE_V bit, to indicate that a virtual address
page has been reserved — this should allow a program to
create & reserve inaccessible "guard pages"
- mark page table entries for non-code pages with PAGE_XD bit,
which should be supported on (circa) post-2004 x86-64 CPUs
The metal boot sector code was wrapped in a single-quoted
string, like so:
MZqFpD='
...MZ HEADER...
...E_LFANEW...
...BIOS BOOT SECTOR...'
This might break the shell code loader if the boot sector code
contains a 0x27 (single quote) byte. This patch wraps the
boot sector code in a here-document instead:
MZqFpD='
...MZ HEADER...' <<'@'
...E_LFANEW...
...BIOS BOOT SECTOR...
@
This is harder to break — when interpreted as a shell script,
the code can only accidentally terminate the here-document
if there is a "\n@\n" sequence inside the BIOS boot portion.
You can now run bare metal on bare metal!
* Fix handling of int 0x15 eax = 0xe820 memory map
* Fix some issues in initial page table creation
* hello4.com now works outside emulators
* Ensure area for identity page tables are zeroed first
* Simplify logic for creating page table entries, this partly
reverts 577c0f6226
* Add degenerate MBR partition entry, to ease testing
Co-authored-by: tkchia <tkchia-cosmo@gmx.com>
This makes breaking changes to add underscores to many non-standard
function names provided by the c library. MODE=tiny is now tinier and
we now use smaller locks that are better for tiny apps in this mode.
Some headers have been renamed to be in the same folder as the build
package, so it'll be easier to know which build dependency is needed.
Certain old misguided interfaces have been removed. Intel intrinsics
headers are now listed in libc/isystem (but not in the amalgamation)
to help further improve open source compatibility. Header complexity
has also been reduced. Lastly, more shell scripts are now available.
This allows e.g. `qemu-system-x86_64 -s o/examples/hello.com
-serial stdio` to work without having to add extra padding to
the end of the `hello.com` "disk image".
(The sector count computation is divided among two instructions
in the assembly code. This is done on purpose, to prevent an
ASCII 0x27 (single quote) byte from appearing in the bare
metal loader code, which will break the shell script loader.
There is probably a better way.)
Co-authored-by: tkchia <tkchia-cosmo@gmx.com>
This should strike a better compromise that keeps people happy about the
security of APE when it extracts the loader. This way systems with users
who aren't trusted (e.g. CPanel) won't be at any risk of compromise when
there isn't an `ape` loader on the system `$PATH`.
This change also bumps redbean up to 2.0.3
Calls to lock/unlock functions are now NOPs by default. The first time
clone() is called, they get turned into CALL instructions. Doing this
caused funcctions like fputc() to shrink from 85 bytes to 45+4 bytes.
Since the ANSI solution of `(__threaded && lock())` inlines os much
superfluous binary content into functions all over the place.
- Finish cleaning up the stdio unlocked APIs
- Make __cxa_finalize() properly thread safe
- Don't log locks if threads aren't being used
- Add some more mutex guards to places using _mmi
- Specific lock names now appear in the --ftrace logs
- Fix mkdeps.com generating invalid Makefiles sometimes
- Simplify and fix bugs in the test runner infrastructure
- Fix issue where sometimes some functions wouldn't be logged
The longjmp relocation in the master boot record coincidentally had a
quote character in it, which caused the master boot record to be used
when interpreter by the shell. The solution, is to move the grub stub
below the long mode loader so the real mode loader relocation is near
the master boot record. This change includes a regression test.
- Implement openpty()
- Add `--assimilate` flag to APE bootloader
- Restore Linux vDSO clock_gettime() support
- Use `$(APE_NO_MODIFY_SELF)` on more programs
- Add FreeBSD-specific mmap() flags
- Reduce size of the APE loader from 8kb to 4kb
- Work towards fixing the Makefile build on WSL
- Automate testing of APE no-modify-self behaviors
- Make the ape.S shell script code cleaner and tinier
- Improve the APE sanity check to test behavior better
- Fixed issue with ShowCrashReports() sigaltstack() on BSDs
- Delete symbols for S_MODE magnums which wasted compile time
If you checked out yesterday's APE commit, please run:
rm -f /usr/bin/ape o/tmp/ape /tmp/ape "${TMPDIR:-/tmp}/ape"
Because this change fixes certain aspects of the new ABI. We don't have
automated migrations for APE loader versions yet. Thanks! You can also
download prebuilt binaries here:
- https://justine.lol/ape.elf (Linux/FreeBSD/NetBSD/OpenBSD)
- https://justine.lol/ape.macho (Apple)
Install the appropriate one as `/usr/bin/ape`.
The "no modify self" variant of Actually Portable Executable is now
supported on all platforms. If you use `$(APE_NO_MODIFY_SELF)` then
ld.bfd will embed a 4096 byte ELF binary and a 4096 byte Macho file
which are installed on the fly to ${TMPDIR:-/tmp}, which enables us
launch the executable, without needing to copy the whole executable
To prevent it from copying a tiny executable to your temp directory
you need to install the `ape` command (renamed from ape-loader), to
a system path. For example:
# FreeBSD / NetBSD / OpenBSD
make -j8 o//ape/ape
cp o//ape/ape /usr/bin/ape
# Mac OS
# make -j8 o//ape/ape.macho
curl https://justine.lol/ape.macho >/usr/bin/ape
chmod +x /usr/bin/ape
On Linux you can get even more performance with the new binfmt_misc
support which makes launching non-modifying APE binaries as fast as
launching ELF executables. Running the following command:
# Linux
ape/apeinstall.sh
Will copy APE loader to /usr/bin/ape and register with binfmt_misc
Lastly, this change also fixes a really interesting race condition
with OpenBSD thread joining.
