One of the disadvantages of x25519 and ℘256 is it only provides 126 bits
of security, so that seems like a weak link in the chain, if we're using
ECDHE-ECDSA-AES256-GCM-SHA384. The U.S. government wants classified data
to be encrypted using a curve at least as strong as ℘384, which provides
192 bits of security, but if you read the consensus of stack exchange it
would give you the impression that ℘384 is three times slower.
This change (as well as the previous one) makes ℘384 three times as fast
by tuning its modulus and multiplication subroutines with new tests that
should convincingly show: the optimized code behaves the same way as the
old code. Some of the diff noise from the previous change is now removed
too, so that our vendored fork can be more easily compared with upstream
sources. So you can now have stronger cryptography without compromises.
℘384 modulus Justine l: 28𝑐 9𝑛𝑠
℘384 modulus MbedTLS NIST l: 127𝑐 41𝑛𝑠
℘384 modulus MbedTLS MPI l: 1,850𝑐 597𝑛𝑠
The benchmarks above show the improvements made by secp384r1() which is
an important function since it needs to be called 13,000 times whenever
someone establishes a connection to your web server. The same's true of
Mul6x6Adx() which is able to multiply 384-bit numbers in 73 cycles, but
only if your CPU was purchased after 2014 when Broadwell was introduced
This change makes SSL virtual hosting possible. You can now load
multiple certificates for multiple domains and redbean will just
figure out which one to use, even if you only have 1 ip address.
You can also use a jumbo certificate that lists all your domains
in the the subject alternative names.
This change also makes performance improvements to MbedTLS. Here
are some benchmarks vs. cc1920749e
BEFORE AFTER (microsecs)
suite_ssl.com 2512881 191738 13.11x faster
suite_pkparse.com 36291 3295 11.01x faster
suite_x509parse.com 854669 120293 7.10x faster
suite_pkwrite.com 6549 1265 5.18x faster
suite_ecdsa.com 53347 18778 2.84x faster
suite_pk.com 49051 18717 2.62x faster
suite_ecdh.com 19535 9502 2.06x faster
suite_shax.com 15848 7965 1.99x faster
suite_rsa.com 353257 184828 1.91x faster
suite_x509write.com 162646 85733 1.90x faster
suite_ecp.com 20503 11050 1.86x faster
suite_hmac_drbg.no_reseed.com 19528 11417 1.71x faster
suite_hmac_drbg.nopr.com 12460 8010 1.56x faster
suite_mpi.com 687124 442661 1.55x faster
suite_hmac_drbg.pr.com 11890 7752 1.53x faster
There aren't any special tricks to the performance imporvements.
It's mostly due to code cleanup, assembly and intel instructions
like mulx, adox, and adcx.
This change boosts SSL handshake performance from 2,627 to ~10,000 per
second which is the same level of performance as NGINX at establishing
secure connections. That's impressive if we consider that redbean is a
forking frontend application server. This was accomplished by:
1. Enabling either SSL session caching or SSL tickets. We choose to
use tickets since they reduce network round trips too and that's
a more important metric than wrk'ing localhost.
2. Fixing mbedtls_mpi_sub_abs() which is the most frequently called
function. It's called about 12,000 times during an SSL handshake
since it's the basis of most arithmetic operations like addition
and for some strange reason it was designed to make two needless
copies in addition to calling malloc and free. That's now fixed.
3. Improving TLS output buffering during the SSL handshake only, so
that only a single is write and read system call is needed until
blocking on the ping pong.
redbean will now do a better job wiping sensitive memory from a child
process as soon as it's not needed. The nice thing about fork is it's
much faster than reverse proxying so the goal is to use the different
address spaces along with setuid() to minimize the risk that a server
key will be compromised in the event that application code is hacked.
The following Lua APIs have been added:
- IsDaemon() → bool
- ProgramPidPath(str)
The following Lua hooks have been added:
- OnClientConnection(ip:int,port:int,serverip:int,serverport:int) → bool
- OnProcessCreate(pid:int,ip:int,port:int,serverip:int,serverport:int)
- OnProcessDestroy(pid:int)
- OnServerStart()
- OnServerStop()
- OnWorkerStart()
- OnWorkerStop()
redbean now does a better job at applying gzip on the fly from the local
filesystem, using a streaming chunked api with constant memory, which is
useful for doing things like serving a 4gb text file off NFS, and having
it start transmitting in milliseconds. redbean will also compute entropy
on the beginnings of files to determine if compression is profitable.
This change pays off technical debts relating to memory, such as relying
on exit() to free() allocations. That's now mostly fixed so it should be
easier now to spot memory leaks in malloc traces.
This change also fixes bugs and makes improvements to our SSL support.
Uniprocess mode failed handshakes are no longer an issue. Token Alpn is
offered so curl -v looks less weird. Hybrid SSL certificate loading is
now smarter about naming conflicts. Self-signed CA root anchors will no
longer be delivered to the client during the handshake.
The implementations of the getproto* functions follow from the getserv*
functions: same static name allocation, same type of internal function
that opens a file to search, aliases are not written to the struct, same
type of error handling/returns.
This changes also fixes a getaddrinfo AI_PASSIVE memory error. When
getaddrinfo is passed name = NULL and AI_PASSIVE in hints->ai_flags, it was
setting the s_addr value to INADDR_ANY but *not* returning the addrinfo
pointer via *res = ai. This caused a free(NULL) memory error when the caller
tried to free res, because the caller expects res to be a valid pointer to a
struct addrinfo.
Our non-standard API parseport() has been updated to use strtoimax.
strtoimax has an extra parameter endptr to store where the parsing was
terminated. endptr is used in parseport to check if the provided string
was valid.
You can now say the following in your redbean Lua code:
status,headers,payload = Fetch("https://foo.example")
The following Lua APIs have been introduced:
- Fetch(str) → str,{str:str},str
- GetHttpReason(int) → str
- GetHttpReason(int) → str
- ProgramSslFetchVerify(bool)
- ProgramSslClientVerify(bool)
The following flags have been introduced:
- `-j` enables client SSL verification
- `-k` disables Fetch() SSL verification
- `-t INT` may now be passed a negative value for keepalive
Lua exceptions now invoke Cosmopolitan's garbage collector when
unwinding the stack. So it's now safe to use _gc() w/ Lua 𝔱𝔥𝔯𝔬𝔴
See #97
Things are a little better. The LLD that comes with Linux seems to work.
Old versions like LLVM 8 haven't been supported since Cosmopolitan v0.2.
Running Clang on Windows with --target=x86_64-pc-linux-gnu doesn't seem
to work. It has something to do with the recently added .zip section in
the linker script. But even if that's removed, LLD on Windows thinks it
is building an EFI application for some reason. Linker scripts are such
a brittle house of cards, even for just ld.bfd alone..
We should just find a way to run our one true musl-cross-make linux gcc
toolchain under Blinkenlights on non-Linux because GCC and Clang are so
nondeterministic, inconsistent, and unreproducible when built for other
operating systems. We need an actually portable compiler/linker that'll
always behave the same way no matter what.
See #180
For every call of getservbyname/getservbyport the lookup of
/etc/services is done by opening the file and parsing each line
one-by-one. This is slow, but the implementation is simple.
This change also adds fixes for the gethostbyname function.
Under MODE=tiny or MODE=tinylinux we now go back to using my homebrew
version of DEFLATE decompression which is 10x smaller but 10x slower
than Chromium Zlib. In tiny mode we also disable compressed responses
howewver redbean will still serve precompressed responses. This change
also removes a few other dependencies like strftime() and getaddrinfo()
which means you can't say `-l localhost` in tiny mode, you have to say
something like `-l 127.0.0.1`.
m=tinylinux
make -j8 MODE=$m o/$m/tool/net/redbean-original.com
ls -hal o/$m/tool/net/redbean-original.com
This change reduces the above size from 191.4 to 150.9 kb.
gethostbyname, gethostbyaddr follow simple implementations: they
internally call getaddrinfo and getnameinfo respectively, and fill out
the minimum details. remaining functions are stubs.
- Use nullness checks when calling weakly linked functions.
- Avoid typedef for reasons described in Linux Kernel style guide.
- Avoid enum in in Windows headers. Earlier in Cosmo's history all one
hundred files in libc/nt/enum/ used to be enums and it resulted in
gigabytes of DWARF data almost as large as everything else in the
codebase combined.
- Bitfields aren't our friends. They have frequent ABI breakages,
inconsistent arithmetic across compilers, and different endianness
between cpus. Compiler authors also haven't invested much roi into
making bit fields go fast so they produce poor assembly.
- Use memccpy() instead of strncpy() or snprintf() for length-bounded
copying of C strings. strncpy() is a misunderstood function and
snprintf() is awesome but memccpy() deserves more love.
Your redbean can now interoperate with clients that require TLS crypto.
This is accomplished using a protocol polyglot that lets us distinguish
between HTTP and HTTPS regardless of the port number. Certificates will
be generated automatically, if none are supplied by the user. Footprint
increases by only a few hundred kb so redbean in MODY=tiny is now 1.0mb
- Add lseek() polyfills for ZIP executable
- Automatically polyfill /tmp/FOO paths on NT
- Fix readdir() / ftw() / nftw() bugs on Windows
- Introduce -B flag for slower SSL that's stronger
- Remove mbedtls features Cosmopolitan doesn't need
- Have base64 decoder support the uri-safe alternative
- Remove Truncated HMAC because it's forbidden by the IETF
- Add all the mbedtls test suites and make them go 3x faster
- Support opendir() / readdir() / closedir() on ZIP executable
- Use Everest for ECDHE-ECDSA because it's so good it's so good
- Add tinier implementation of sha1 since it's not worth the rom
- Add chi-square monte-carlo mean correlation tests for getrandom()
- Source entropy on Windows from the proper interface everyone uses
We're continuing to outperform NGINX and other servers on raw message
throughput. Using SSL means that instead of 1,000,000 qps you can get
around 300,000 qps. However redbean isn't as fast as NGINX yet at SSL
handshakes, since redbean can do 2,627 per second and NGINX does 4.3k
Right now, the SSL UX story works best if you give your redbean a key
signing key since that can be easily generated by openssl using a one
liner then redbean will do all the things that are impossibly hard to
do like signing ecdsa and rsa certificates that'll work in chrome. We
should integrate the let's encrypt acme protocol in the future.
Live Demo: https://redbean.justine.lol/
Root Cert: https://redbean.justine.lol/redbean1.crt
This change configures Mbed TLS to support the fewest number of things
possible required to run an HTTPS server that caters to the sweet spot
of being legacy enough to support the vast majority of user agents but
modern enough that Chrome and Firefox remain happy. That should entail
- TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
- TLS_RSA_WITH_AES_128_CBC_SHA
Even though other suites still get included so what usually happens in
practice is ECDHE-RSA-AES256-GCM-SHA384 under TLS 1.2 will be selected
and the binary footprint is reasonable, and should cost us about 200kb
- SIOCGIFCONFIG: reads and enumerate all the network interfaces
- SIOCGIFADDR: reads network address for a given interface
- SIOCGIFFLAGS: reads network flags for a given interface
- SIOCGIFNETMASK: reads network netmask for a given interface
- SIOCGIFBRDADDR: reads network broadcast address for a given interface
- SIOCGIFDSTADDR: reads peer destination address for a given
interface (not supported for Windows)
This change defines Linux ABI structs for the above interfaces and adds
polyfills to ensure they behave consistently on XNU and Windows.
The getnameinfo implementation requires an address -> name lookup on the
hosts file (ie struct HostsTxt) and the previous implementation used
flags to check whether HostsTxt was sorted according to address or name,
and then re-sorted it if necessary. Now getnameinfo lookup does not
require sorting, it does a simple linear lookup, and so the related code
was simplified
See #172 for discussion.
This change gets redbean SQLite working in write mode on Windows.
Warnings have been added to the appropriate and responsible places.
Hacking proprietary PC systems into production-worthy servers isn't
terribly high on the list of priorities. Consider BSD or Linux when
building online systems that service requests from multiple people.
Fixes#193
redbean lua handlers that perform sql queries can do 400k qps.
We now use a separate compile-time options for SQLite, when building the
SQLite shell versus building the production web serving code. It doesn't
seem appropriate for something like redbean to include backups, progress
callbacks, query completion, profiling, EXPLAIN, ALTER, ANALYZE, VACUUM,
etc. since those tasks are better left to the sqlite3.com shell program.
Lua SQLite pointer APIs have been removed since we're not using threads.
The Lua APIs for installing update / commit / rollback hooks are removed
due to a general sense of disagreement and an overall lack of comfort.
Full-Text Search and R*Tree are as large as the rest of SQLite combined.
Turning those off keeps redbean under 1mb when built for MODE=tiny which
is nice for marketing purposes.
If you need something that was removed, file an issue, and we'll add it.
Added necessary constants (DNS_TYPE_PTR, NI_NUMERICHOST etc.).
Implementation of getnameinfo is similar to getaddrinfo, with internal
functions:
* ResolveDnsReverse: performs rDNS query and parses the PTR record
* ResolveHostsReverse: reads /etc/hosts to map hostname to
address
Earlier, the HOSTS.txt would only need to be sorted at loading time,
because the only kind of lookup was name -> address. Now since address
-> name lookups are also possible, so the HostsTxt struct, the sorting
method (and the related tests) was changed to reflect this.
- Better UBSAN error messages
- POSIX Advisory Locks polyfills
- Move redbean manual to /.help.txt
- System call memory safety in ASAN mode
- Character classification now does UNICODE
This change brings page faults for precompressed static asset serving
down from 27 to 20 (or fewer) after fork. This is more of an art than
science. Hopefully Blinkenlights can visualize page faults soon.
ASAN and vfork() don't appear to play well together. Maybe in later
versions of GCC it'll be better. But vfork() is flirting with danger
after all and that probably doesn't make sense in ASAN mode anyway.
- Fix regression with `%lu`
- Added some more headers witnessed in the wild
- Added `-M INT` option to redbean to tune max payload size
- Work around InfoZIP 256 character limit on comment line size
If your redbean `/.init.lua` file defines a global callable named
`OnHttpRequest` then redbean will delegate all serving control to
your function. You may then restore the default serving paths, by
calling the new `Route()`, `RouteHost()`, and `RoutePath()` APIs.
Closes#150
redbean improvements:
- Explicitly disable corking
- Simulate Python regex API for Lua
- Send warmup requests in main process on startup
- Add Class-A granular IPv4 network classification
- Add /statusz page so you can monitor your redbean's health
- Fix regressions on OpenBSD/NetBSD caused by recent changes
- Plug Authorization header into Lua GetUser and GetPass APIs
- Recognize X-Forwarded-{For,Host} from local reverse proxies
- Add many additional functions to redbean Lua server page API
- Report resource usage of child processes on `/` listing page
- Introduce `-a` flag for logging child process resource usage
- Introduce `-t MILLIS` flag and `ProgramTimeout(ms)` init API
- Introduce `-H "Header: value"` flag and `ProgramHeader(k,v)` API
Cosmopolitan Libc improvements:
- Make strerror() simpler
- Make inet_pton() not depend on sscanf()
- Fix OpenExecutable() which broke .data section earlier
- Fix stdio in cases where it overflows kernel tty buffer
- Fix bugs in crash reporting w/o .com.dbg binary present
- Add polyfills for SO_LINGER, SO_RCVTIMEO, and SO_SNDTIMEO
- Polyfill TCP_CORK on BSD and XNU using TCP_NOPUSH magnums
New netcat clone in examples/nc.c:
While testing some of the failure conditions for redbean, I noticed that
BusyBox's `nc` command is pretty busted, if you use it as an interactive
tool, rather than having it be part of a pipeline. Unfortunately this'll
only work on UNIX since Windows doesn't let us poll on stdio and sockets
at the same time because I don't think they want tools like this running
on their platform. So if you want forbidden fruit, it's here so enjoy it
- POSIX regular expressions for Lua
- Improved protocol parsing and encoding
- Additional APIs for ZIP storage retrieval
- Fix st_mode issue on NT for regular files
- Generalized APIs for URL and Host handling
- Worked out the kinks in resource resolution
- Allow for custom error pages like /404.html
The most exciting improvement is dynamic pages will soon be able to use
the executable itself as an object store. it required a heroic technique
for overcoming ETXTBSY restrictions which lets us open the executable in
read/write mode, which means (1) wa can restore the APE header, and (2)
we can potentially containerize redbean extension code so that modules
you download for your redbean online will only impact your redbean.
Here's a list of breaking changes to redbean:
- Remove /tool/net/ prefix from magic ZIP paths
- GetHeader() now returns NIL if header is absent
Here's a list of fixes and enhancements to redbean:
- Support 64-bit ZIP archives
- Record User-Agent header in logs
- Add twelve error handlers to accept()
- Display octal st_mode on listing page
- Show ZIP file comments on listing page
- Restore APE MZ header on redbean startup
- Track request count on redbean index page
- Report server uptime on redbean index page
- Don't bind server socket using SO_REUSEPORT
- Fix#151 where Lua LoadAsset() could free twice
- Report rusage accounting when workers exit w/ -vv
- Use ZIP iattr field as text/plain vs. binary hint
- Add ParseUrl() API for parsing things like a.href
- Add ParseParams() API for parsing HTTP POST bodies
- Add IsAcceptablePath() API for checking dots, etc.
- Add IsValidHttpToken() API for validating sane ASCII
- Add IsAcceptableHostPort() for validating HOST[:PORT]
- Send 400 response to HTTP/1.1 requests without a Host
- Send 403 response if ZIP or file isn't other readable
- Add virtual hosting that tries prepending Host to path
- Route requests based on Host in Request-URI if present
- Host routing will attempt to remove or add the www. prefix
- Sign-extend UNIX timestamps and don't adjust FileTime zone
Here's some of the improvements made to Cosmopolitan Libc:
- Fix ape.S indentation
- Improve consts.sh magnums
- Write pretty good URL parser
- Improve rusage accounting apis
- Bring mremap() closer to working
- Added ZIP APIs which will change
- Check for overflow in reallocarray()
- Remove overly fancy linkage in strerror()
- Fix GDB attach on crash w/ OpenBSD msyscall()
- Make sigqueue() portable to most UNIX distros
- Make integer serialization macros more elegant
- Bring back 34x tprecode8to16() performance boost
- Make malloc() more resilient to absurdly large sizes
