linux-stable/Documentation/livepatch/system-state.rst

168 lines
5.4 KiB
ReStructuredText
Raw Permalink Normal View History

====================
System State Changes
====================
Some users are really reluctant to reboot a system. This brings the need
to provide more livepatches and maintain some compatibility between them.
Maintaining more livepatches is much easier with cumulative livepatches.
Each new livepatch completely replaces any older one. It can keep,
add, and even remove fixes. And it is typically safe to replace any version
of the livepatch with any other one thanks to the atomic replace feature.
The problems might come with shadow variables and callbacks. They might
change the system behavior or state so that it is no longer safe to
go back and use an older livepatch or the original kernel code. Also
any new livepatch must be able to detect what changes have already been
done by the already installed livepatches.
This is where the livepatch system state tracking gets useful. It
allows to:
- store data needed to manipulate and restore the system state
- define compatibility between livepatches using a change id
and version
1. Livepatch system state API
=============================
The state of the system might get modified either by several livepatch callbacks
or by the newly used code. Also it must be possible to find changes done by
already installed livepatches.
Each modified state is described by struct klp_state, see
include/linux/livepatch.h.
Each livepatch defines an array of struct klp_states. They mention
all states that the livepatch modifies.
The livepatch author must define the following two fields for each
struct klp_state:
- *id*
- Non-zero number used to identify the affected system state.
- *version*
- Number describing the variant of the system state change that
is supported by the given livepatch.
The state can be manipulated using two functions:
Documentation: livepatch: Add livepatch API page The livepatch subsystem has several exported functions and objects with kerneldoc comments. Though the livepatch documentation contains handwritten descriptions of all of these exported functions, they are currently not pulled into the docs build using the kernel-doc directive. In order to allow readers of the documentation to see the full kerneldoc comments in the generated documentation files, this change adds a new Documentation/livepatch/api.rst page which contains kernel-doc directives to link the kerneldoc comments directly in the documentation. With this, all of the hand-written descriptions of the APIs now cross-reference the kerneldoc comments on the new Livepatching APIs page, and running ./scripts/find-unused-docs.sh on kernel/livepatch no longer shows any files as missing documentation. Note that all of the handwritten API descriptions were left alone with the exception of Documentation/livepatch/system-state.rst, which was updated to allow the cross-referencing to work correctly. The file now follows the cross-referencing formatting guidance specified in Documentation/doc-guide/kernel-doc.rst. Furthermore, some comments around klp_shadow_free_all() were updated to say <_, id> rather than <*, id> to match the rest of the file, and to prevent the docs build from emitting an "Inline emphasis start-string without end string" error. Signed-off-by: David Vernet <void@manifault.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20211221145743.4098360-1-void@manifault.com
2021-12-21 14:57:45 +00:00
- klp_get_state()
- Get struct klp_state associated with the given livepatch
and state id.
Documentation: livepatch: Add livepatch API page The livepatch subsystem has several exported functions and objects with kerneldoc comments. Though the livepatch documentation contains handwritten descriptions of all of these exported functions, they are currently not pulled into the docs build using the kernel-doc directive. In order to allow readers of the documentation to see the full kerneldoc comments in the generated documentation files, this change adds a new Documentation/livepatch/api.rst page which contains kernel-doc directives to link the kerneldoc comments directly in the documentation. With this, all of the hand-written descriptions of the APIs now cross-reference the kerneldoc comments on the new Livepatching APIs page, and running ./scripts/find-unused-docs.sh on kernel/livepatch no longer shows any files as missing documentation. Note that all of the handwritten API descriptions were left alone with the exception of Documentation/livepatch/system-state.rst, which was updated to allow the cross-referencing to work correctly. The file now follows the cross-referencing formatting guidance specified in Documentation/doc-guide/kernel-doc.rst. Furthermore, some comments around klp_shadow_free_all() were updated to say <_, id> rather than <*, id> to match the rest of the file, and to prevent the docs build from emitting an "Inline emphasis start-string without end string" error. Signed-off-by: David Vernet <void@manifault.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20211221145743.4098360-1-void@manifault.com
2021-12-21 14:57:45 +00:00
- klp_get_prev_state()
- Get struct klp_state associated with the given feature id and
already installed livepatches.
2. Livepatch compatibility
==========================
The system state version is used to prevent loading incompatible livepatches.
The check is done when the livepatch is enabled. The rules are:
- Any completely new system state modification is allowed.
- System state modifications with the same or higher version are allowed
for already modified system states.
- Cumulative livepatches must handle all system state modifications from
already installed livepatches.
- Non-cumulative livepatches are allowed to touch already modified
system states.
3. Supported scenarios
======================
Livepatches have their life-cycle and the same is true for the system
state changes. Every compatible livepatch has to support the following
scenarios:
- Modify the system state when the livepatch gets enabled and the state
has not been already modified by a livepatches that are being
replaced.
- Take over or update the system state modification when is has already
been done by a livepatch that is being replaced.
- Restore the original state when the livepatch is disabled.
- Restore the previous state when the transition is reverted.
It might be the original system state or the state modification
done by livepatches that were being replaced.
- Remove any already made changes when error occurs and the livepatch
cannot get enabled.
4. Expected usage
=================
System states are usually modified by livepatch callbacks. The expected
role of each callback is as follows:
*pre_patch()*
- Allocate *state->data* when necessary. The allocation might fail
and *pre_patch()* is the only callback that could stop loading
of the livepatch. The allocation is not needed when the data
are already provided by previously installed livepatches.
- Do any other preparatory action that is needed by
the new code even before the transition gets finished.
For example, initialize *state->data*.
The system state itself is typically modified in *post_patch()*
when the entire system is able to handle it.
- Clean up its own mess in case of error. It might be done by a custom
code or by calling *post_unpatch()* explicitly.
*post_patch()*
- Copy *state->data* from the previous livepatch when they are
compatible.
- Do the actual system state modification. Eventually allow
the new code to use it.
- Make sure that *state->data* has all necessary information.
- Free *state->data* from replaces livepatches when they are
not longer needed.
*pre_unpatch()*
- Prevent the code, added by the livepatch, relying on the system
state change.
- Revert the system state modification..
*post_unpatch()*
- Distinguish transition reverse and livepatch disabling by
checking *klp_get_prev_state()*.
- In case of transition reverse, restore the previous system
state. It might mean doing nothing.
- Remove any not longer needed setting or data.
.. note::
*pre_unpatch()* typically does symmetric operations to *post_patch()*.
Except that it is called only when the livepatch is being disabled.
Therefore it does not need to care about any previously installed
livepatch.
*post_unpatch()* typically does symmetric operations to *pre_patch()*.
It might be called also during the transition reverse. Therefore it
has to handle the state of the previously installed livepatches.