linux-stable/fs/overlayfs/super.c

1534 lines
38 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0-only
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
/*
*
* Copyright (C) 2011 Novell Inc.
*/
#include <uapi/linux/magic.h>
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
#include <linux/fs.h>
#include <linux/namei.h>
#include <linux/xattr.h>
#include <linux/mount.h>
#include <linux/parser.h>
#include <linux/module.h>
#include <linux/statfs.h>
#include <linux/seq_file.h>
#include <linux/posix_acl_xattr.h>
#include <linux/exportfs.h>
#include <linux/file.h>
#include <linux/fs_context.h>
#include <linux/fs_parser.h>
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
#include "overlayfs.h"
#include "params.h"
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
MODULE_AUTHOR("Miklos Szeredi <miklos@szeredi.hu>");
MODULE_DESCRIPTION("Overlay filesystem");
MODULE_LICENSE("GPL");
struct ovl_dir_cache;
static struct dentry *ovl_d_real(struct dentry *dentry, enum d_real_type type)
{
struct dentry *upper, *lower;
int err;
switch (type) {
case D_REAL_DATA:
case D_REAL_METADATA:
break;
default:
goto bug;
}
if (!d_is_reg(dentry)) {
/* d_real_inode() is only relevant for regular files */
return dentry;
}
upper = ovl_dentry_upper(dentry);
if (upper && (type == D_REAL_METADATA ||
ovl_has_upperdata(d_inode(dentry))))
return upper;
if (type == D_REAL_METADATA) {
lower = ovl_dentry_lower(dentry);
goto real_lower;
}
/*
* Best effort lazy lookup of lowerdata for D_REAL_DATA case to return
* the real lowerdata dentry. The only current caller of d_real() with
* D_REAL_DATA is d_real_inode() from trace_uprobe and this caller is
* likely going to be followed reading from the file, before placing
* uprobes on offset within the file, so lowerdata should be available
* when setting the uprobe.
*/
err = ovl_verify_lowerdata(dentry);
if (err)
goto bug;
lower = ovl_dentry_lowerdata(dentry);
if (!lower)
goto bug;
real_lower:
/* Handle recursion into stacked lower fs */
return d_real(lower, type);
bug:
WARN(1, "%s(%pd4, %d): real dentry not found\n", __func__, dentry, type);
return dentry;
}
static int ovl_revalidate_real(struct dentry *d, unsigned int flags, bool weak)
{
int ret = 1;
if (!d)
return 1;
if (weak) {
if (d->d_flags & DCACHE_OP_WEAK_REVALIDATE)
ret = d->d_op->d_weak_revalidate(d, flags);
} else if (d->d_flags & DCACHE_OP_REVALIDATE) {
ret = d->d_op->d_revalidate(d, flags);
if (!ret) {
if (!(flags & LOOKUP_RCU))
d_invalidate(d);
ret = -ESTALE;
}
}
return ret;
}
static int ovl_dentry_revalidate_common(struct dentry *dentry,
unsigned int flags, bool weak)
{
struct ovl_entry *oe;
struct ovl_path *lowerstack;
struct inode *inode = d_inode_rcu(dentry);
struct dentry *upper;
unsigned int i;
int ret = 1;
/* Careful in RCU mode */
if (!inode)
return -ECHILD;
oe = OVL_I_E(inode);
lowerstack = ovl_lowerstack(oe);
upper = ovl_i_dentry_upper(inode);
if (upper)
ret = ovl_revalidate_real(upper, flags, weak);
for (i = 0; ret > 0 && i < ovl_numlower(oe); i++)
ret = ovl_revalidate_real(lowerstack[i].dentry, flags, weak);
return ret;
}
static int ovl_dentry_revalidate(struct dentry *dentry, unsigned int flags)
{
return ovl_dentry_revalidate_common(dentry, flags, false);
}
static int ovl_dentry_weak_revalidate(struct dentry *dentry, unsigned int flags)
{
return ovl_dentry_revalidate_common(dentry, flags, true);
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
static const struct dentry_operations ovl_dentry_operations = {
.d_real = ovl_d_real,
.d_revalidate = ovl_dentry_revalidate,
.d_weak_revalidate = ovl_dentry_weak_revalidate,
};
static struct kmem_cache *ovl_inode_cachep;
static struct inode *ovl_alloc_inode(struct super_block *sb)
{
struct ovl_inode *oi = alloc_inode_sb(sb, ovl_inode_cachep, GFP_KERNEL);
if (!oi)
return NULL;
oi->cache = NULL;
oi->redirect = NULL;
oi->version = 0;
oi->flags = 0;
oi->__upperdentry = NULL;
oi->lowerdata_redirect = NULL;
oi->oe = NULL;
mutex_init(&oi->lock);
return &oi->vfs_inode;
}
static void ovl_free_inode(struct inode *inode)
{
struct ovl_inode *oi = OVL_I(inode);
kfree(oi->redirect);
kfree(oi->oe);
mutex_destroy(&oi->lock);
kmem_cache_free(ovl_inode_cachep, oi);
}
static void ovl_destroy_inode(struct inode *inode)
{
struct ovl_inode *oi = OVL_I(inode);
dput(oi->__upperdentry);
ovl_stack_put(ovl_lowerstack(oi->oe), ovl_numlower(oi->oe));
if (S_ISDIR(inode->i_mode))
ovl_dir_cache_free(inode);
else
kfree(oi->lowerdata_redirect);
}
static void ovl_put_super(struct super_block *sb)
{
struct ovl_fs *ofs = OVL_FS(sb);
if (ofs)
ovl_free_fs(ofs);
}
/* Sync real dirty inodes in upper filesystem (if it exists) */
static int ovl_sync_fs(struct super_block *sb, int wait)
{
struct ovl_fs *ofs = OVL_FS(sb);
struct super_block *upper_sb;
int ret;
ovl: implement volatile-specific fsync error behaviour Overlayfs's volatile option allows the user to bypass all forced sync calls to the upperdir filesystem. This comes at the cost of safety. We can never ensure that the user's data is intact, but we can make a best effort to expose whether or not the data is likely to be in a bad state. The best way to handle this in the time being is that if an overlayfs's upperdir experiences an error after a volatile mount occurs, that error will be returned on fsync, fdatasync, sync, and syncfs. This is contradictory to the traditional behaviour of VFS which fails the call once, and only raises an error if a subsequent fsync error has occurred, and been raised by the filesystem. One awkward aspect of the patch is that we have to manually set the superblock's errseq_t after the sync_fs callback as opposed to just returning an error from syncfs. This is because the call chain looks something like this: sys_syncfs -> sync_filesystem -> __sync_filesystem -> /* The return value is ignored here sb->s_op->sync_fs(sb) _sync_blockdev /* Where the VFS fetches the error to raise to userspace */ errseq_check_and_advance Because of this we call errseq_set every time the sync_fs callback occurs. Due to the nature of this seen / unseen dichotomy, if the upperdir is an inconsistent state at the initial mount time, overlayfs will refuse to mount, as overlayfs cannot get a snapshot of the upperdir's errseq that will increment on error until the user calls syncfs. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Suggested-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Fixes: c86243b090bc ("ovl: provide a mount option "volatile"") Cc: stable@vger.kernel.org Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-01-08 00:10:43 +00:00
ret = ovl_sync_status(ofs);
/*
* We have to always set the err, because the return value isn't
* checked in syncfs, and instead indirectly return an error via
* the sb's writeback errseq, which VFS inspects after this call.
*/
if (ret < 0) {
errseq_set(&sb->s_wb_err, -EIO);
return -EIO;
}
if (!ret)
return ret;
/*
* Not called for sync(2) call or an emergency sync (SB_I_SKIP_SYNC).
* All the super blocks will be iterated, including upper_sb.
*
* If this is a syncfs(2) call, then we do need to call
* sync_filesystem() on upper_sb, but enough if we do it when being
* called with wait == 1.
*/
if (!wait)
return 0;
upper_sb = ovl_upper_mnt(ofs)->mnt_sb;
down_read(&upper_sb->s_umount);
ret = sync_filesystem(upper_sb);
up_read(&upper_sb->s_umount);
return ret;
}
/**
* ovl_statfs
* @dentry: The dentry to query
* @buf: The struct kstatfs to fill in with stats
*
* Get the filesystem statistics. As writes always target the upper layer
* filesystem pass the statfs to the upper filesystem (if it exists)
*/
static int ovl_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct super_block *sb = dentry->d_sb;
struct ovl_fs *ofs = OVL_FS(sb);
struct dentry *root_dentry = sb->s_root;
struct path path;
int err;
ovl_path_real(root_dentry, &path);
err = vfs_statfs(&path, buf);
if (!err) {
buf->f_namelen = ofs->namelen;
buf->f_type = OVERLAYFS_SUPER_MAGIC;
if (ovl_has_fsid(ofs))
buf->f_fsid = uuid_to_fsid(sb->s_uuid.b);
}
return err;
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
static const struct super_operations ovl_super_operations = {
.alloc_inode = ovl_alloc_inode,
.free_inode = ovl_free_inode,
.destroy_inode = ovl_destroy_inode,
.drop_inode = generic_delete_inode,
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
.put_super = ovl_put_super,
.sync_fs = ovl_sync_fs,
.statfs = ovl_statfs,
.show_options = ovl_show_options,
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
};
#define OVL_WORKDIR_NAME "work"
#define OVL_INDEXDIR_NAME "index"
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
static struct dentry *ovl_workdir_create(struct ovl_fs *ofs,
const char *name, bool persist)
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
{
struct inode *dir = ofs->workbasedir->d_inode;
struct vfsmount *mnt = ovl_upper_mnt(ofs);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
struct dentry *work;
int err;
bool retried = false;
inode_lock_nested(dir, I_MUTEX_PARENT);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
retry:
work = ovl_lookup_upper(ofs, name, ofs->workbasedir, strlen(name));
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
if (!IS_ERR(work)) {
struct iattr attr = {
.ia_valid = ATTR_MODE,
.ia_mode = S_IFDIR | 0,
};
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
if (work->d_inode) {
err = -EEXIST;
if (retried)
goto out_dput;
if (persist)
goto out_unlock;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
retried = true;
err = ovl_workdir_cleanup(ofs, dir, mnt, work, 0);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
dput(work);
if (err == -EINVAL) {
work = ERR_PTR(err);
goto out_unlock;
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
goto retry;
}
err = ovl_mkdir_real(ofs, dir, &work, attr.ia_mode);
if (err)
goto out_dput;
/* Weird filesystem returning with hashed negative (kernfs)? */
err = -EINVAL;
if (d_really_is_negative(work))
goto out_dput;
/*
* Try to remove POSIX ACL xattrs from workdir. We are good if:
*
* a) success (there was a POSIX ACL xattr and was removed)
* b) -ENODATA (there was no POSIX ACL xattr)
* c) -EOPNOTSUPP (POSIX ACL xattrs are not supported)
*
* There are various other error values that could effectively
* mean that the xattr doesn't exist (e.g. -ERANGE is returned
* if the xattr name is too long), but the set of filesystems
* allowed as upper are limited to "normal" ones, where checking
* for the above two errors is sufficient.
*/
err = ovl_do_remove_acl(ofs, work, XATTR_NAME_POSIX_ACL_DEFAULT);
if (err && err != -ENODATA && err != -EOPNOTSUPP)
goto out_dput;
err = ovl_do_remove_acl(ofs, work, XATTR_NAME_POSIX_ACL_ACCESS);
if (err && err != -ENODATA && err != -EOPNOTSUPP)
goto out_dput;
/* Clear any inherited mode bits */
inode_lock(work->d_inode);
err = ovl_do_notify_change(ofs, work, &attr);
inode_unlock(work->d_inode);
if (err)
goto out_dput;
} else {
err = PTR_ERR(work);
goto out_err;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
}
out_unlock:
inode_unlock(dir);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
return work;
out_dput:
dput(work);
out_err:
pr_warn("failed to create directory %s/%s (errno: %i); mounting read-only\n",
ofs->config.workdir, name, -err);
work = NULL;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
goto out_unlock;
}
static int ovl_check_namelen(const struct path *path, struct ovl_fs *ofs,
const char *name)
{
struct kstatfs statfs;
int err = vfs_statfs(path, &statfs);
if (err)
pr_err("statfs failed on '%s'\n", name);
else
ofs->namelen = max(ofs->namelen, statfs.f_namelen);
return err;
}
static int ovl_lower_dir(const char *name, struct path *path,
struct ovl_fs *ofs, int *stack_depth)
{
int fh_type;
int err;
err = ovl_check_namelen(path, ofs, name);
if (err)
return err;
*stack_depth = max(*stack_depth, path->mnt->mnt_sb->s_stack_depth);
/*
* The inodes index feature and NFS export need to encode and decode
* file handles, so they require that all layers support them.
*/
fh_type = ovl_can_decode_fh(path->dentry->d_sb);
if ((ofs->config.nfs_export ||
(ofs->config.index && ofs->config.upperdir)) && !fh_type) {
ofs->config.index = false;
ofs->config.nfs_export = false;
pr_warn("fs on '%s' does not support file handles, falling back to index=off,nfs_export=off.\n",
name);
}
ofs->nofh |= !fh_type;
ovl: restrict lower null uuid for "xino=auto" Commit a888db310195 ("ovl: fix regression with re-formatted lower squashfs") attempted to fix a regression with existing setups that use a practice that we are trying to discourage. The discourage part was described this way in the commit message: "To avoid the reported regression while still allowing the new features with single lower squashfs, do not allow decoding origin with lower null uuid unless user opted-in to one of the new features that require following the lower inode of non-dir upper (index, xino, metacopy)." The three mentioned features are disabled by default in Kconfig, so it was assumed that if they are enabled, the user opted-in for them. Apparently, distros started to configure CONFIG_OVERLAY_FS_XINO_AUTO=y some time ago, so users upgrading their kernels can still be affected by said regression even though they never opted-in for any new feature. To fix this, treat "xino=on" as "user opted-in", but not "xino=auto". Since we are changing the behavior of "xino=auto" to no longer follow to lower origin with null uuid, take this one step further and disable xino in that corner case. To be consistent, disable xino also in cases of lower fs without file handle support and upper fs without xattr support. Update documentation w.r.t the new "xino=auto" behavior and fix the out dated bits of documentation regarding "xino" and regarding offline modifications to lower layers. Link: https://lore.kernel.org/linux-unionfs/b36a429d7c563730c28d763d4d57a6fc30508a4f.1615216996.git.kevin@kevinlocke.name/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-03-09 16:26:54 +00:00
/*
* Decoding origin file handle is required for persistent st_ino.
* Without persistent st_ino, xino=auto falls back to xino=off.
*/
if (ofs->config.xino == OVL_XINO_AUTO &&
ofs->config.upperdir && !fh_type) {
ofs->config.xino = OVL_XINO_OFF;
pr_warn("fs on '%s' does not support file handles, falling back to xino=off.\n",
name);
}
/* Check if lower fs has 32bit inode numbers */
if (fh_type != FILEID_INO32_GEN)
ofs->xino_mode = -1;
return 0;
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
/* Workdir should not be subdir of upperdir and vice versa */
static bool ovl_workdir_ok(struct dentry *workdir, struct dentry *upperdir)
{
bool ok = false;
if (workdir != upperdir) {
struct dentry *trap = lock_rename(workdir, upperdir);
if (!IS_ERR(trap))
unlock_rename(workdir, upperdir);
ok = (trap == NULL);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
}
return ok;
}
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
static int ovl_setup_trap(struct super_block *sb, struct dentry *dir,
struct inode **ptrap, const char *name)
{
struct inode *trap;
int err;
trap = ovl_get_trap_inode(sb, dir);
err = PTR_ERR_OR_ZERO(trap);
if (err) {
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
if (err == -ELOOP)
pr_err("conflicting %s path\n", name);
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
return err;
}
*ptrap = trap;
return 0;
}
ovl: fix regression caused by overlapping layers detection Once upon a time, commit 2cac0c00a6cd ("ovl: get exclusive ownership on upper/work dirs") in v4.13 added some sanity checks on overlayfs layers. This change caused a docker regression. The root cause was mount leaks by docker, which as far as I know, still exist. To mitigate the regression, commit 85fdee1eef1a ("ovl: fix regression caused by exclusive upper/work dir protection") in v4.14 turned the mount errors into warnings for the default index=off configuration. Recently, commit 146d62e5a586 ("ovl: detect overlapping layers") in v5.2, re-introduced exclusive upper/work dir checks regardless of index=off configuration. This changes the status quo and mount leak related bug reports have started to re-surface. Restore the status quo to fix the regressions. To clarify, index=off does NOT relax overlapping layers check for this ovelayfs mount. index=off only relaxes exclusive upper/work dir checks with another overlayfs mount. To cover the part of overlapping layers detection that used the exclusive upper/work dir checks to detect overlap with self upper/work dir, add a trap also on the work base dir. Link: https://github.com/moby/moby/issues/34672 Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/ Link: https://github.com/containers/libpod/issues/3540 Fixes: 146d62e5a586 ("ovl: detect overlapping layers") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Tested-by: Colin Walters <walters@verbum.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-07-12 12:24:34 +00:00
/*
* Determine how we treat concurrent use of upperdir/workdir based on the
* index feature. This is papering over mount leaks of container runtimes,
* for example, an old overlay mount is leaked and now its upperdir is
* attempted to be used as a lower layer in a new overlay mount.
*/
static int ovl_report_in_use(struct ovl_fs *ofs, const char *name)
{
if (ofs->config.index) {
pr_err("%s is in-use as upperdir/workdir of another mount, mount with '-o index=off' to override exclusive upperdir protection.\n",
ovl: fix regression caused by overlapping layers detection Once upon a time, commit 2cac0c00a6cd ("ovl: get exclusive ownership on upper/work dirs") in v4.13 added some sanity checks on overlayfs layers. This change caused a docker regression. The root cause was mount leaks by docker, which as far as I know, still exist. To mitigate the regression, commit 85fdee1eef1a ("ovl: fix regression caused by exclusive upper/work dir protection") in v4.14 turned the mount errors into warnings for the default index=off configuration. Recently, commit 146d62e5a586 ("ovl: detect overlapping layers") in v5.2, re-introduced exclusive upper/work dir checks regardless of index=off configuration. This changes the status quo and mount leak related bug reports have started to re-surface. Restore the status quo to fix the regressions. To clarify, index=off does NOT relax overlapping layers check for this ovelayfs mount. index=off only relaxes exclusive upper/work dir checks with another overlayfs mount. To cover the part of overlapping layers detection that used the exclusive upper/work dir checks to detect overlap with self upper/work dir, add a trap also on the work base dir. Link: https://github.com/moby/moby/issues/34672 Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/ Link: https://github.com/containers/libpod/issues/3540 Fixes: 146d62e5a586 ("ovl: detect overlapping layers") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Tested-by: Colin Walters <walters@verbum.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-07-12 12:24:34 +00:00
name);
return -EBUSY;
} else {
pr_warn("%s is in-use as upperdir/workdir of another mount, accessing files from both mounts will result in undefined behavior.\n",
ovl: fix regression caused by overlapping layers detection Once upon a time, commit 2cac0c00a6cd ("ovl: get exclusive ownership on upper/work dirs") in v4.13 added some sanity checks on overlayfs layers. This change caused a docker regression. The root cause was mount leaks by docker, which as far as I know, still exist. To mitigate the regression, commit 85fdee1eef1a ("ovl: fix regression caused by exclusive upper/work dir protection") in v4.14 turned the mount errors into warnings for the default index=off configuration. Recently, commit 146d62e5a586 ("ovl: detect overlapping layers") in v5.2, re-introduced exclusive upper/work dir checks regardless of index=off configuration. This changes the status quo and mount leak related bug reports have started to re-surface. Restore the status quo to fix the regressions. To clarify, index=off does NOT relax overlapping layers check for this ovelayfs mount. index=off only relaxes exclusive upper/work dir checks with another overlayfs mount. To cover the part of overlapping layers detection that used the exclusive upper/work dir checks to detect overlap with self upper/work dir, add a trap also on the work base dir. Link: https://github.com/moby/moby/issues/34672 Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/ Link: https://github.com/containers/libpod/issues/3540 Fixes: 146d62e5a586 ("ovl: detect overlapping layers") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Tested-by: Colin Walters <walters@verbum.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-07-12 12:24:34 +00:00
name);
return 0;
}
}
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
static int ovl_get_upper(struct super_block *sb, struct ovl_fs *ofs,
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
struct ovl_layer *upper_layer,
const struct path *upperpath)
{
struct vfsmount *upper_mnt;
int err;
/* Upperdir path should not be r/o */
if (__mnt_is_readonly(upperpath->mnt)) {
pr_err("upper fs is r/o, try multi-lower layers mount\n");
err = -EINVAL;
goto out;
}
err = ovl_check_namelen(upperpath, ofs, ofs->config.upperdir);
if (err)
goto out;
err = ovl_setup_trap(sb, upperpath->dentry, &upper_layer->trap,
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
"upperdir");
if (err)
goto out;
upper_mnt = clone_private_mount(upperpath);
err = PTR_ERR(upper_mnt);
if (IS_ERR(upper_mnt)) {
pr_err("failed to clone upperpath\n");
goto out;
}
/* Don't inherit atime flags */
upper_mnt->mnt_flags &= ~(MNT_NOATIME | MNT_NODIRATIME | MNT_RELATIME);
upper_layer->mnt = upper_mnt;
upper_layer->idx = 0;
upper_layer->fsid = 0;
/*
* Inherit SB_NOSEC flag from upperdir.
*
* This optimization changes behavior when a security related attribute
* (suid/sgid/security.*) is changed on an underlying layer. This is
* okay because we don't yet have guarantees in that case, but it will
* need careful treatment once we want to honour changes to underlying
* filesystems.
*/
if (upper_mnt->mnt_sb->s_flags & SB_NOSEC)
sb->s_flags |= SB_NOSEC;
if (ovl_inuse_trylock(ovl_upper_mnt(ofs)->mnt_root)) {
ofs->upperdir_locked = true;
} else {
ovl: fix regression caused by overlapping layers detection Once upon a time, commit 2cac0c00a6cd ("ovl: get exclusive ownership on upper/work dirs") in v4.13 added some sanity checks on overlayfs layers. This change caused a docker regression. The root cause was mount leaks by docker, which as far as I know, still exist. To mitigate the regression, commit 85fdee1eef1a ("ovl: fix regression caused by exclusive upper/work dir protection") in v4.14 turned the mount errors into warnings for the default index=off configuration. Recently, commit 146d62e5a586 ("ovl: detect overlapping layers") in v5.2, re-introduced exclusive upper/work dir checks regardless of index=off configuration. This changes the status quo and mount leak related bug reports have started to re-surface. Restore the status quo to fix the regressions. To clarify, index=off does NOT relax overlapping layers check for this ovelayfs mount. index=off only relaxes exclusive upper/work dir checks with another overlayfs mount. To cover the part of overlapping layers detection that used the exclusive upper/work dir checks to detect overlap with self upper/work dir, add a trap also on the work base dir. Link: https://github.com/moby/moby/issues/34672 Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/ Link: https://github.com/containers/libpod/issues/3540 Fixes: 146d62e5a586 ("ovl: detect overlapping layers") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Tested-by: Colin Walters <walters@verbum.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-07-12 12:24:34 +00:00
err = ovl_report_in_use(ofs, "upperdir");
if (err)
goto out;
}
err = 0;
out:
return err;
}
/*
* Returns 1 if RENAME_WHITEOUT is supported, 0 if not supported and
* negative values if error is encountered.
*/
static int ovl_check_rename_whiteout(struct ovl_fs *ofs)
{
struct dentry *workdir = ofs->workdir;
struct inode *dir = d_inode(workdir);
struct dentry *temp;
struct dentry *dest;
struct dentry *whiteout;
struct name_snapshot name;
int err;
inode_lock_nested(dir, I_MUTEX_PARENT);
temp = ovl_create_temp(ofs, workdir, OVL_CATTR(S_IFREG | 0));
err = PTR_ERR(temp);
if (IS_ERR(temp))
goto out_unlock;
dest = ovl_lookup_temp(ofs, workdir);
err = PTR_ERR(dest);
if (IS_ERR(dest)) {
dput(temp);
goto out_unlock;
}
/* Name is inline and stable - using snapshot as a copy helper */
take_dentry_name_snapshot(&name, temp);
err = ovl_do_rename(ofs, dir, temp, dir, dest, RENAME_WHITEOUT);
if (err) {
if (err == -EINVAL)
err = 0;
goto cleanup_temp;
}
whiteout = ovl_lookup_upper(ofs, name.name.name, workdir, name.name.len);
err = PTR_ERR(whiteout);
if (IS_ERR(whiteout))
goto cleanup_temp;
err = ovl_upper_is_whiteout(ofs, whiteout);
/* Best effort cleanup of whiteout and temp file */
if (err)
ovl_cleanup(ofs, dir, whiteout);
dput(whiteout);
cleanup_temp:
ovl_cleanup(ofs, dir, temp);
release_dentry_name_snapshot(&name);
dput(temp);
dput(dest);
out_unlock:
inode_unlock(dir);
return err;
}
static struct dentry *ovl_lookup_or_create(struct ovl_fs *ofs,
struct dentry *parent,
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-08-31 18:15:29 +00:00
const char *name, umode_t mode)
{
size_t len = strlen(name);
struct dentry *child;
inode_lock_nested(parent->d_inode, I_MUTEX_PARENT);
child = ovl_lookup_upper(ofs, name, parent, len);
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-08-31 18:15:29 +00:00
if (!IS_ERR(child) && !child->d_inode)
child = ovl_create_real(ofs, parent->d_inode, child,
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-08-31 18:15:29 +00:00
OVL_CATTR(mode));
inode_unlock(parent->d_inode);
dput(parent);
return child;
}
/*
* Creates $workdir/work/incompat/volatile/dirty file if it is not already
* present.
*/
static int ovl_create_volatile_dirty(struct ovl_fs *ofs)
{
unsigned int ctr;
struct dentry *d = dget(ofs->workbasedir);
static const char *const volatile_path[] = {
OVL_WORKDIR_NAME, "incompat", "volatile", "dirty"
};
const char *const *name = volatile_path;
for (ctr = ARRAY_SIZE(volatile_path); ctr; ctr--, name++) {
d = ovl_lookup_or_create(ofs, d, *name, ctr > 1 ? S_IFDIR : S_IFREG);
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-08-31 18:15:29 +00:00
if (IS_ERR(d))
return PTR_ERR(d);
}
dput(d);
return 0;
}
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
static int ovl_make_workdir(struct super_block *sb, struct ovl_fs *ofs,
const struct path *workpath)
{
struct vfsmount *mnt = ovl_upper_mnt(ofs);
struct dentry *workdir;
struct file *tmpfile;
bool rename_whiteout;
bool d_type;
int fh_type;
int err;
err = mnt_want_write(mnt);
if (err)
return err;
workdir = ovl_workdir_create(ofs, OVL_WORKDIR_NAME, false);
err = PTR_ERR(workdir);
if (IS_ERR_OR_NULL(workdir))
goto out;
ofs->workdir = workdir;
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
err = ovl_setup_trap(sb, ofs->workdir, &ofs->workdir_trap, "workdir");
if (err)
goto out;
/*
* Upper should support d_type, else whiteouts are visible. Given
* workdir and upper are on same fs, we can do iterate_dir() on
* workdir. This check requires successful creation of workdir in
* previous step.
*/
err = ovl_check_d_type_supported(workpath);
if (err < 0)
goto out;
d_type = err;
if (!d_type)
pr_warn("upper fs needs to support d_type.\n");
/* Check if upper/work fs supports O_TMPFILE */
tmpfile = ovl_do_tmpfile(ofs, ofs->workdir, S_IFREG | 0);
ofs->tmpfile = !IS_ERR(tmpfile);
if (ofs->tmpfile)
fput(tmpfile);
else
pr_warn("upper fs does not support tmpfile.\n");
/* Check if upper/work fs supports RENAME_WHITEOUT */
err = ovl_check_rename_whiteout(ofs);
if (err < 0)
goto out;
rename_whiteout = err;
if (!rename_whiteout)
pr_warn("upper fs does not support RENAME_WHITEOUT.\n");
/*
* Check if upper/work fs supports (trusted|user).overlay.* xattr
*/
err = ovl_setxattr(ofs, ofs->workdir, OVL_XATTR_OPAQUE, "0", 1);
if (err) {
pr_warn("failed to set xattr on upper\n");
ofs->noxattr = true;
if (ovl_redirect_follow(ofs)) {
ofs->config.redirect_mode = OVL_REDIRECT_NOFOLLOW;
pr_warn("...falling back to redirect_dir=nofollow.\n");
}
if (ofs->config.metacopy) {
ovl: restrict lower null uuid for "xino=auto" Commit a888db310195 ("ovl: fix regression with re-formatted lower squashfs") attempted to fix a regression with existing setups that use a practice that we are trying to discourage. The discourage part was described this way in the commit message: "To avoid the reported regression while still allowing the new features with single lower squashfs, do not allow decoding origin with lower null uuid unless user opted-in to one of the new features that require following the lower inode of non-dir upper (index, xino, metacopy)." The three mentioned features are disabled by default in Kconfig, so it was assumed that if they are enabled, the user opted-in for them. Apparently, distros started to configure CONFIG_OVERLAY_FS_XINO_AUTO=y some time ago, so users upgrading their kernels can still be affected by said regression even though they never opted-in for any new feature. To fix this, treat "xino=on" as "user opted-in", but not "xino=auto". Since we are changing the behavior of "xino=auto" to no longer follow to lower origin with null uuid, take this one step further and disable xino in that corner case. To be consistent, disable xino also in cases of lower fs without file handle support and upper fs without xattr support. Update documentation w.r.t the new "xino=auto" behavior and fix the out dated bits of documentation regarding "xino" and regarding offline modifications to lower layers. Link: https://lore.kernel.org/linux-unionfs/b36a429d7c563730c28d763d4d57a6fc30508a4f.1615216996.git.kevin@kevinlocke.name/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-03-09 16:26:54 +00:00
ofs->config.metacopy = false;
pr_warn("...falling back to metacopy=off.\n");
}
if (ofs->config.index) {
ofs->config.index = false;
pr_warn("...falling back to index=off.\n");
ovl: restrict lower null uuid for "xino=auto" Commit a888db310195 ("ovl: fix regression with re-formatted lower squashfs") attempted to fix a regression with existing setups that use a practice that we are trying to discourage. The discourage part was described this way in the commit message: "To avoid the reported regression while still allowing the new features with single lower squashfs, do not allow decoding origin with lower null uuid unless user opted-in to one of the new features that require following the lower inode of non-dir upper (index, xino, metacopy)." The three mentioned features are disabled by default in Kconfig, so it was assumed that if they are enabled, the user opted-in for them. Apparently, distros started to configure CONFIG_OVERLAY_FS_XINO_AUTO=y some time ago, so users upgrading their kernels can still be affected by said regression even though they never opted-in for any new feature. To fix this, treat "xino=on" as "user opted-in", but not "xino=auto". Since we are changing the behavior of "xino=auto" to no longer follow to lower origin with null uuid, take this one step further and disable xino in that corner case. To be consistent, disable xino also in cases of lower fs without file handle support and upper fs without xattr support. Update documentation w.r.t the new "xino=auto" behavior and fix the out dated bits of documentation regarding "xino" and regarding offline modifications to lower layers. Link: https://lore.kernel.org/linux-unionfs/b36a429d7c563730c28d763d4d57a6fc30508a4f.1615216996.git.kevin@kevinlocke.name/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-03-09 16:26:54 +00:00
}
if (ovl_has_fsid(ofs)) {
ofs->config.uuid = OVL_UUID_NULL;
pr_warn("...falling back to uuid=null.\n");
}
ovl: restrict lower null uuid for "xino=auto" Commit a888db310195 ("ovl: fix regression with re-formatted lower squashfs") attempted to fix a regression with existing setups that use a practice that we are trying to discourage. The discourage part was described this way in the commit message: "To avoid the reported regression while still allowing the new features with single lower squashfs, do not allow decoding origin with lower null uuid unless user opted-in to one of the new features that require following the lower inode of non-dir upper (index, xino, metacopy)." The three mentioned features are disabled by default in Kconfig, so it was assumed that if they are enabled, the user opted-in for them. Apparently, distros started to configure CONFIG_OVERLAY_FS_XINO_AUTO=y some time ago, so users upgrading their kernels can still be affected by said regression even though they never opted-in for any new feature. To fix this, treat "xino=on" as "user opted-in", but not "xino=auto". Since we are changing the behavior of "xino=auto" to no longer follow to lower origin with null uuid, take this one step further and disable xino in that corner case. To be consistent, disable xino also in cases of lower fs without file handle support and upper fs without xattr support. Update documentation w.r.t the new "xino=auto" behavior and fix the out dated bits of documentation regarding "xino" and regarding offline modifications to lower layers. Link: https://lore.kernel.org/linux-unionfs/b36a429d7c563730c28d763d4d57a6fc30508a4f.1615216996.git.kevin@kevinlocke.name/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-03-09 16:26:54 +00:00
/*
* xattr support is required for persistent st_ino.
* Without persistent st_ino, xino=auto falls back to xino=off.
*/
if (ofs->config.xino == OVL_XINO_AUTO) {
ofs->config.xino = OVL_XINO_OFF;
pr_warn("...falling back to xino=off.\n");
ovl: restrict lower null uuid for "xino=auto" Commit a888db310195 ("ovl: fix regression with re-formatted lower squashfs") attempted to fix a regression with existing setups that use a practice that we are trying to discourage. The discourage part was described this way in the commit message: "To avoid the reported regression while still allowing the new features with single lower squashfs, do not allow decoding origin with lower null uuid unless user opted-in to one of the new features that require following the lower inode of non-dir upper (index, xino, metacopy)." The three mentioned features are disabled by default in Kconfig, so it was assumed that if they are enabled, the user opted-in for them. Apparently, distros started to configure CONFIG_OVERLAY_FS_XINO_AUTO=y some time ago, so users upgrading their kernels can still be affected by said regression even though they never opted-in for any new feature. To fix this, treat "xino=on" as "user opted-in", but not "xino=auto". Since we are changing the behavior of "xino=auto" to no longer follow to lower origin with null uuid, take this one step further and disable xino in that corner case. To be consistent, disable xino also in cases of lower fs without file handle support and upper fs without xattr support. Update documentation w.r.t the new "xino=auto" behavior and fix the out dated bits of documentation regarding "xino" and regarding offline modifications to lower layers. Link: https://lore.kernel.org/linux-unionfs/b36a429d7c563730c28d763d4d57a6fc30508a4f.1615216996.git.kevin@kevinlocke.name/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-03-09 16:26:54 +00:00
}
if (err == -EPERM && !ofs->config.userxattr)
pr_info("try mounting with 'userxattr' option\n");
err = 0;
} else {
ovl_removexattr(ofs, ofs->workdir, OVL_XATTR_OPAQUE);
}
/*
* We allowed sub-optimal upper fs configuration and don't want to break
* users over kernel upgrade, but we never allowed remote upper fs, so
* we can enforce strict requirements for remote upper fs.
*/
if (ovl_dentry_remote(ofs->workdir) &&
(!d_type || !rename_whiteout || ofs->noxattr)) {
pr_err("upper fs missing required features.\n");
err = -EINVAL;
goto out;
}
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-08-31 18:15:29 +00:00
/*
* For volatile mount, create a incompat/volatile/dirty file to keep
* track of it.
*/
if (ofs->config.ovl_volatile) {
err = ovl_create_volatile_dirty(ofs);
if (err < 0) {
pr_err("Failed to create volatile/dirty file.\n");
goto out;
}
}
/* Check if upper/work fs supports file handles */
fh_type = ovl_can_decode_fh(ofs->workdir->d_sb);
if (ofs->config.index && !fh_type) {
ofs->config.index = false;
pr_warn("upper fs does not support file handles, falling back to index=off.\n");
}
ofs->nofh |= !fh_type;
/* Check if upper fs has 32bit inode numbers */
if (fh_type != FILEID_INO32_GEN)
ofs->xino_mode = -1;
/* NFS export of r/w mount depends on index */
if (ofs->config.nfs_export && !ofs->config.index) {
pr_warn("NFS export requires \"index=on\", falling back to nfs_export=off.\n");
ofs->config.nfs_export = false;
}
out:
mnt_drop_write(mnt);
return err;
}
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
static int ovl_get_workdir(struct super_block *sb, struct ovl_fs *ofs,
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
const struct path *upperpath,
const struct path *workpath)
{
int err;
err = -EINVAL;
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
if (upperpath->mnt != workpath->mnt) {
pr_err("workdir and upperdir must reside under the same mount\n");
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
return err;
}
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
if (!ovl_workdir_ok(workpath->dentry, upperpath->dentry)) {
pr_err("workdir and upperdir must be separate subtrees\n");
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
return err;
}
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
ofs->workbasedir = dget(workpath->dentry);
if (ovl_inuse_trylock(ofs->workbasedir)) {
ofs->workdir_locked = true;
} else {
ovl: fix regression caused by overlapping layers detection Once upon a time, commit 2cac0c00a6cd ("ovl: get exclusive ownership on upper/work dirs") in v4.13 added some sanity checks on overlayfs layers. This change caused a docker regression. The root cause was mount leaks by docker, which as far as I know, still exist. To mitigate the regression, commit 85fdee1eef1a ("ovl: fix regression caused by exclusive upper/work dir protection") in v4.14 turned the mount errors into warnings for the default index=off configuration. Recently, commit 146d62e5a586 ("ovl: detect overlapping layers") in v5.2, re-introduced exclusive upper/work dir checks regardless of index=off configuration. This changes the status quo and mount leak related bug reports have started to re-surface. Restore the status quo to fix the regressions. To clarify, index=off does NOT relax overlapping layers check for this ovelayfs mount. index=off only relaxes exclusive upper/work dir checks with another overlayfs mount. To cover the part of overlapping layers detection that used the exclusive upper/work dir checks to detect overlap with self upper/work dir, add a trap also on the work base dir. Link: https://github.com/moby/moby/issues/34672 Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/ Link: https://github.com/containers/libpod/issues/3540 Fixes: 146d62e5a586 ("ovl: detect overlapping layers") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Tested-by: Colin Walters <walters@verbum.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-07-12 12:24:34 +00:00
err = ovl_report_in_use(ofs, "workdir");
if (err)
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
return err;
}
ovl: fix regression caused by overlapping layers detection Once upon a time, commit 2cac0c00a6cd ("ovl: get exclusive ownership on upper/work dirs") in v4.13 added some sanity checks on overlayfs layers. This change caused a docker regression. The root cause was mount leaks by docker, which as far as I know, still exist. To mitigate the regression, commit 85fdee1eef1a ("ovl: fix regression caused by exclusive upper/work dir protection") in v4.14 turned the mount errors into warnings for the default index=off configuration. Recently, commit 146d62e5a586 ("ovl: detect overlapping layers") in v5.2, re-introduced exclusive upper/work dir checks regardless of index=off configuration. This changes the status quo and mount leak related bug reports have started to re-surface. Restore the status quo to fix the regressions. To clarify, index=off does NOT relax overlapping layers check for this ovelayfs mount. index=off only relaxes exclusive upper/work dir checks with another overlayfs mount. To cover the part of overlapping layers detection that used the exclusive upper/work dir checks to detect overlap with self upper/work dir, add a trap also on the work base dir. Link: https://github.com/moby/moby/issues/34672 Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/ Link: https://github.com/containers/libpod/issues/3540 Fixes: 146d62e5a586 ("ovl: detect overlapping layers") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Tested-by: Colin Walters <walters@verbum.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-07-12 12:24:34 +00:00
err = ovl_setup_trap(sb, ofs->workbasedir, &ofs->workbasedir_trap,
"workdir");
if (err)
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
return err;
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
return ovl_make_workdir(sb, ofs, workpath);
}
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
static int ovl_get_indexdir(struct super_block *sb, struct ovl_fs *ofs,
struct ovl_entry *oe, const struct path *upperpath)
{
struct vfsmount *mnt = ovl_upper_mnt(ofs);
struct dentry *indexdir;
struct dentry *origin = ovl_lowerstack(oe)->dentry;
const struct ovl_fh *fh;
int err;
fh = ovl_get_origin_fh(ofs, origin);
if (IS_ERR(fh))
return PTR_ERR(fh);
err = mnt_want_write(mnt);
if (err)
goto out_free_fh;
/* Verify lower root is upper root origin */
err = ovl_verify_origin_fh(ofs, upperpath->dentry, fh, true);
if (err) {
pr_err("failed to verify upper root origin\n");
goto out;
}
/* index dir will act also as workdir */
iput(ofs->workdir_trap);
ofs->workdir_trap = NULL;
dput(ofs->workdir);
ofs->workdir = NULL;
indexdir = ovl_workdir_create(ofs, OVL_INDEXDIR_NAME, true);
if (IS_ERR(indexdir)) {
err = PTR_ERR(indexdir);
} else if (indexdir) {
ofs->workdir = indexdir;
err = ovl_setup_trap(sb, indexdir, &ofs->workdir_trap,
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
"indexdir");
if (err)
goto out;
/*
* Verify upper root is exclusively associated with index dir.
* Older kernels stored upper fh in ".overlay.origin"
* xattr. If that xattr exists, verify that it is a match to
* upper dir file handle. In any case, verify or set xattr
* ".overlay.upper" to indicate that index may have
* directory entries.
*/
if (ovl_check_origin_xattr(ofs, indexdir)) {
err = ovl_verify_origin_xattr(ofs, indexdir,
OVL_XATTR_ORIGIN,
upperpath->dentry, true,
false);
if (err)
pr_err("failed to verify index dir 'origin' xattr\n");
}
err = ovl_verify_upper(ofs, indexdir, upperpath->dentry, true);
if (err)
pr_err("failed to verify index dir 'upper' xattr\n");
/* Cleanup bad/stale/orphan index entries */
if (!err)
err = ovl_indexdir_cleanup(ofs);
}
if (err || !indexdir)
pr_warn("try deleting index dir or mounting with '-o index=off' to disable inodes index.\n");
out:
mnt_drop_write(mnt);
out_free_fh:
kfree(fh);
return err;
}
static bool ovl_lower_uuid_ok(struct ovl_fs *ofs, const uuid_t *uuid)
{
unsigned int i;
if (!ofs->config.nfs_export && !ovl_upper_mnt(ofs))
return true;
/*
* We allow using single lower with null uuid for index and nfs_export
* for example to support those features with single lower squashfs.
* To avoid regressions in setups of overlay with re-formatted lower
* squashfs, do not allow decoding origin with lower null uuid unless
* user opted-in to one of the new features that require following the
* lower inode of non-dir upper.
*/
if (ovl_allow_offline_changes(ofs) && uuid_is_null(uuid))
return false;
for (i = 0; i < ofs->numfs; i++) {
/*
* We use uuid to associate an overlay lower file handle with a
* lower layer, so we can accept lower fs with null uuid as long
* as all lower layers with null uuid are on the same fs.
ovl: fix lookup failure on multi lower squashfs In the past, overlayfs required that lower fs have non null uuid in order to support nfs export and decode copy up origin file handles. Commit 9df085f3c9a2 ("ovl: relax requirement for non null uuid of lower fs") relaxed this requirement for nfs export support, as long as uuid (even if null) is unique among all lower fs. However, said commit unintentionally also relaxed the non null uuid requirement for decoding copy up origin file handles, regardless of the unique uuid requirement. Amend this mistake by disabling decoding of copy up origin file handle from lower fs with a conflicting uuid. We still encode copy up origin file handles from those fs, because file handles like those already exist in the wild and because they might provide useful information in the future. There is an unhandled corner case described by Miklos this way: - two filesystems, A and B, both have null uuid - upper layer is on A - lower layer 1 is also on A - lower layer 2 is on B In this case bad_uuid won't be set for B, because the check only involves the list of lower fs. Hence we'll try to decode a layer 2 origin on layer 1 and fail. We will deal with this corner case later. Reported-by: Colin Ian King <colin.king@canonical.com> Tested-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/lkml/20191106234301.283006-1-colin.king@canonical.com/ Fixes: 9df085f3c9a2 ("ovl: relax requirement for non null uuid ...") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-11-14 20:28:41 +00:00
* if we detect multiple lower fs with the same uuid, we
* disable lower file handle decoding on all of them.
*/
if (ofs->fs[i].is_lower &&
uuid_equal(&ofs->fs[i].sb->s_uuid, uuid)) {
ofs->fs[i].bad_uuid = true;
return false;
ovl: fix lookup failure on multi lower squashfs In the past, overlayfs required that lower fs have non null uuid in order to support nfs export and decode copy up origin file handles. Commit 9df085f3c9a2 ("ovl: relax requirement for non null uuid of lower fs") relaxed this requirement for nfs export support, as long as uuid (even if null) is unique among all lower fs. However, said commit unintentionally also relaxed the non null uuid requirement for decoding copy up origin file handles, regardless of the unique uuid requirement. Amend this mistake by disabling decoding of copy up origin file handle from lower fs with a conflicting uuid. We still encode copy up origin file handles from those fs, because file handles like those already exist in the wild and because they might provide useful information in the future. There is an unhandled corner case described by Miklos this way: - two filesystems, A and B, both have null uuid - upper layer is on A - lower layer 1 is also on A - lower layer 2 is on B In this case bad_uuid won't be set for B, because the check only involves the list of lower fs. Hence we'll try to decode a layer 2 origin on layer 1 and fail. We will deal with this corner case later. Reported-by: Colin Ian King <colin.king@canonical.com> Tested-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/lkml/20191106234301.283006-1-colin.king@canonical.com/ Fixes: 9df085f3c9a2 ("ovl: relax requirement for non null uuid ...") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-11-14 20:28:41 +00:00
}
}
return true;
}
/* Get a unique fsid for the layer */
static int ovl_get_fsid(struct ovl_fs *ofs, const struct path *path)
{
struct super_block *sb = path->mnt->mnt_sb;
unsigned int i;
dev_t dev;
int err;
ovl: fix lookup failure on multi lower squashfs In the past, overlayfs required that lower fs have non null uuid in order to support nfs export and decode copy up origin file handles. Commit 9df085f3c9a2 ("ovl: relax requirement for non null uuid of lower fs") relaxed this requirement for nfs export support, as long as uuid (even if null) is unique among all lower fs. However, said commit unintentionally also relaxed the non null uuid requirement for decoding copy up origin file handles, regardless of the unique uuid requirement. Amend this mistake by disabling decoding of copy up origin file handle from lower fs with a conflicting uuid. We still encode copy up origin file handles from those fs, because file handles like those already exist in the wild and because they might provide useful information in the future. There is an unhandled corner case described by Miklos this way: - two filesystems, A and B, both have null uuid - upper layer is on A - lower layer 1 is also on A - lower layer 2 is on B In this case bad_uuid won't be set for B, because the check only involves the list of lower fs. Hence we'll try to decode a layer 2 origin on layer 1 and fail. We will deal with this corner case later. Reported-by: Colin Ian King <colin.king@canonical.com> Tested-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/lkml/20191106234301.283006-1-colin.king@canonical.com/ Fixes: 9df085f3c9a2 ("ovl: relax requirement for non null uuid ...") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-11-14 20:28:41 +00:00
bool bad_uuid = false;
ovl: restrict lower null uuid for "xino=auto" Commit a888db310195 ("ovl: fix regression with re-formatted lower squashfs") attempted to fix a regression with existing setups that use a practice that we are trying to discourage. The discourage part was described this way in the commit message: "To avoid the reported regression while still allowing the new features with single lower squashfs, do not allow decoding origin with lower null uuid unless user opted-in to one of the new features that require following the lower inode of non-dir upper (index, xino, metacopy)." The three mentioned features are disabled by default in Kconfig, so it was assumed that if they are enabled, the user opted-in for them. Apparently, distros started to configure CONFIG_OVERLAY_FS_XINO_AUTO=y some time ago, so users upgrading their kernels can still be affected by said regression even though they never opted-in for any new feature. To fix this, treat "xino=on" as "user opted-in", but not "xino=auto". Since we are changing the behavior of "xino=auto" to no longer follow to lower origin with null uuid, take this one step further and disable xino in that corner case. To be consistent, disable xino also in cases of lower fs without file handle support and upper fs without xattr support. Update documentation w.r.t the new "xino=auto" behavior and fix the out dated bits of documentation regarding "xino" and regarding offline modifications to lower layers. Link: https://lore.kernel.org/linux-unionfs/b36a429d7c563730c28d763d4d57a6fc30508a4f.1615216996.git.kevin@kevinlocke.name/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-03-09 16:26:54 +00:00
bool warn = false;
for (i = 0; i < ofs->numfs; i++) {
if (ofs->fs[i].sb == sb)
return i;
}
if (!ovl_lower_uuid_ok(ofs, &sb->s_uuid)) {
ovl: fix lookup failure on multi lower squashfs In the past, overlayfs required that lower fs have non null uuid in order to support nfs export and decode copy up origin file handles. Commit 9df085f3c9a2 ("ovl: relax requirement for non null uuid of lower fs") relaxed this requirement for nfs export support, as long as uuid (even if null) is unique among all lower fs. However, said commit unintentionally also relaxed the non null uuid requirement for decoding copy up origin file handles, regardless of the unique uuid requirement. Amend this mistake by disabling decoding of copy up origin file handle from lower fs with a conflicting uuid. We still encode copy up origin file handles from those fs, because file handles like those already exist in the wild and because they might provide useful information in the future. There is an unhandled corner case described by Miklos this way: - two filesystems, A and B, both have null uuid - upper layer is on A - lower layer 1 is also on A - lower layer 2 is on B In this case bad_uuid won't be set for B, because the check only involves the list of lower fs. Hence we'll try to decode a layer 2 origin on layer 1 and fail. We will deal with this corner case later. Reported-by: Colin Ian King <colin.king@canonical.com> Tested-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/lkml/20191106234301.283006-1-colin.king@canonical.com/ Fixes: 9df085f3c9a2 ("ovl: relax requirement for non null uuid ...") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-11-14 20:28:41 +00:00
bad_uuid = true;
ovl: restrict lower null uuid for "xino=auto" Commit a888db310195 ("ovl: fix regression with re-formatted lower squashfs") attempted to fix a regression with existing setups that use a practice that we are trying to discourage. The discourage part was described this way in the commit message: "To avoid the reported regression while still allowing the new features with single lower squashfs, do not allow decoding origin with lower null uuid unless user opted-in to one of the new features that require following the lower inode of non-dir upper (index, xino, metacopy)." The three mentioned features are disabled by default in Kconfig, so it was assumed that if they are enabled, the user opted-in for them. Apparently, distros started to configure CONFIG_OVERLAY_FS_XINO_AUTO=y some time ago, so users upgrading their kernels can still be affected by said regression even though they never opted-in for any new feature. To fix this, treat "xino=on" as "user opted-in", but not "xino=auto". Since we are changing the behavior of "xino=auto" to no longer follow to lower origin with null uuid, take this one step further and disable xino in that corner case. To be consistent, disable xino also in cases of lower fs without file handle support and upper fs without xattr support. Update documentation w.r.t the new "xino=auto" behavior and fix the out dated bits of documentation regarding "xino" and regarding offline modifications to lower layers. Link: https://lore.kernel.org/linux-unionfs/b36a429d7c563730c28d763d4d57a6fc30508a4f.1615216996.git.kevin@kevinlocke.name/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-03-09 16:26:54 +00:00
if (ofs->config.xino == OVL_XINO_AUTO) {
ofs->config.xino = OVL_XINO_OFF;
warn = true;
}
ovl: fix lookup failure on multi lower squashfs In the past, overlayfs required that lower fs have non null uuid in order to support nfs export and decode copy up origin file handles. Commit 9df085f3c9a2 ("ovl: relax requirement for non null uuid of lower fs") relaxed this requirement for nfs export support, as long as uuid (even if null) is unique among all lower fs. However, said commit unintentionally also relaxed the non null uuid requirement for decoding copy up origin file handles, regardless of the unique uuid requirement. Amend this mistake by disabling decoding of copy up origin file handle from lower fs with a conflicting uuid. We still encode copy up origin file handles from those fs, because file handles like those already exist in the wild and because they might provide useful information in the future. There is an unhandled corner case described by Miklos this way: - two filesystems, A and B, both have null uuid - upper layer is on A - lower layer 1 is also on A - lower layer 2 is on B In this case bad_uuid won't be set for B, because the check only involves the list of lower fs. Hence we'll try to decode a layer 2 origin on layer 1 and fail. We will deal with this corner case later. Reported-by: Colin Ian King <colin.king@canonical.com> Tested-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/lkml/20191106234301.283006-1-colin.king@canonical.com/ Fixes: 9df085f3c9a2 ("ovl: relax requirement for non null uuid ...") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-11-14 20:28:41 +00:00
if (ofs->config.index || ofs->config.nfs_export) {
ofs->config.index = false;
ofs->config.nfs_export = false;
ovl: restrict lower null uuid for "xino=auto" Commit a888db310195 ("ovl: fix regression with re-formatted lower squashfs") attempted to fix a regression with existing setups that use a practice that we are trying to discourage. The discourage part was described this way in the commit message: "To avoid the reported regression while still allowing the new features with single lower squashfs, do not allow decoding origin with lower null uuid unless user opted-in to one of the new features that require following the lower inode of non-dir upper (index, xino, metacopy)." The three mentioned features are disabled by default in Kconfig, so it was assumed that if they are enabled, the user opted-in for them. Apparently, distros started to configure CONFIG_OVERLAY_FS_XINO_AUTO=y some time ago, so users upgrading their kernels can still be affected by said regression even though they never opted-in for any new feature. To fix this, treat "xino=on" as "user opted-in", but not "xino=auto". Since we are changing the behavior of "xino=auto" to no longer follow to lower origin with null uuid, take this one step further and disable xino in that corner case. To be consistent, disable xino also in cases of lower fs without file handle support and upper fs without xattr support. Update documentation w.r.t the new "xino=auto" behavior and fix the out dated bits of documentation regarding "xino" and regarding offline modifications to lower layers. Link: https://lore.kernel.org/linux-unionfs/b36a429d7c563730c28d763d4d57a6fc30508a4f.1615216996.git.kevin@kevinlocke.name/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-03-09 16:26:54 +00:00
warn = true;
}
if (warn) {
pr_warn("%s uuid detected in lower fs '%pd2', falling back to xino=%s,index=off,nfs_export=off.\n",
ovl: fix lookup failure on multi lower squashfs In the past, overlayfs required that lower fs have non null uuid in order to support nfs export and decode copy up origin file handles. Commit 9df085f3c9a2 ("ovl: relax requirement for non null uuid of lower fs") relaxed this requirement for nfs export support, as long as uuid (even if null) is unique among all lower fs. However, said commit unintentionally also relaxed the non null uuid requirement for decoding copy up origin file handles, regardless of the unique uuid requirement. Amend this mistake by disabling decoding of copy up origin file handle from lower fs with a conflicting uuid. We still encode copy up origin file handles from those fs, because file handles like those already exist in the wild and because they might provide useful information in the future. There is an unhandled corner case described by Miklos this way: - two filesystems, A and B, both have null uuid - upper layer is on A - lower layer 1 is also on A - lower layer 2 is on B In this case bad_uuid won't be set for B, because the check only involves the list of lower fs. Hence we'll try to decode a layer 2 origin on layer 1 and fail. We will deal with this corner case later. Reported-by: Colin Ian King <colin.king@canonical.com> Tested-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/lkml/20191106234301.283006-1-colin.king@canonical.com/ Fixes: 9df085f3c9a2 ("ovl: relax requirement for non null uuid ...") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-11-14 20:28:41 +00:00
uuid_is_null(&sb->s_uuid) ? "null" :
"conflicting",
path->dentry, ovl_xino_mode(&ofs->config));
ovl: fix lookup failure on multi lower squashfs In the past, overlayfs required that lower fs have non null uuid in order to support nfs export and decode copy up origin file handles. Commit 9df085f3c9a2 ("ovl: relax requirement for non null uuid of lower fs") relaxed this requirement for nfs export support, as long as uuid (even if null) is unique among all lower fs. However, said commit unintentionally also relaxed the non null uuid requirement for decoding copy up origin file handles, regardless of the unique uuid requirement. Amend this mistake by disabling decoding of copy up origin file handle from lower fs with a conflicting uuid. We still encode copy up origin file handles from those fs, because file handles like those already exist in the wild and because they might provide useful information in the future. There is an unhandled corner case described by Miklos this way: - two filesystems, A and B, both have null uuid - upper layer is on A - lower layer 1 is also on A - lower layer 2 is on B In this case bad_uuid won't be set for B, because the check only involves the list of lower fs. Hence we'll try to decode a layer 2 origin on layer 1 and fail. We will deal with this corner case later. Reported-by: Colin Ian King <colin.king@canonical.com> Tested-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/lkml/20191106234301.283006-1-colin.king@canonical.com/ Fixes: 9df085f3c9a2 ("ovl: relax requirement for non null uuid ...") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-11-14 20:28:41 +00:00
}
}
err = get_anon_bdev(&dev);
if (err) {
pr_err("failed to get anonymous bdev for lowerpath\n");
return err;
}
ofs->fs[ofs->numfs].sb = sb;
ofs->fs[ofs->numfs].pseudo_dev = dev;
ofs->fs[ofs->numfs].bad_uuid = bad_uuid;
return ofs->numfs++;
}
/*
* The fsid after the last lower fsid is used for the data layers.
* It is a "null fs" with a null sb, null uuid, and no pseudo dev.
*/
static int ovl_get_data_fsid(struct ovl_fs *ofs)
{
return ofs->numfs;
}
static int ovl_get_layers(struct super_block *sb, struct ovl_fs *ofs,
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
struct ovl_fs_context *ctx, struct ovl_layer *layers)
{
int err;
unsigned int i;
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
size_t nr_merged_lower;
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
ofs->fs = kcalloc(ctx->nr + 2, sizeof(struct ovl_sb), GFP_KERNEL);
if (ofs->fs == NULL)
return -ENOMEM;
/*
* idx/fsid 0 are reserved for upper fs even with lower only overlay
* and the last fsid is reserved for "null fs" of the data layers.
*/
ofs->numfs++;
/*
* All lower layers that share the same fs as upper layer, use the same
* pseudo_dev as upper layer. Allocate fs[0].pseudo_dev even for lower
* only overlay to simplify ovl_fs_free().
* is_lower will be set if upper fs is shared with a lower layer.
*/
err = get_anon_bdev(&ofs->fs[0].pseudo_dev);
if (err) {
pr_err("failed to get anonymous bdev for upper fs\n");
return err;
}
if (ovl_upper_mnt(ofs)) {
ofs->fs[0].sb = ovl_upper_mnt(ofs)->mnt_sb;
ofs->fs[0].is_lower = false;
}
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
nr_merged_lower = ctx->nr - ctx->nr_data;
for (i = 0; i < ctx->nr; i++) {
struct ovl_fs_context_layer *l = &ctx->lower[i];
struct vfsmount *mnt;
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
struct inode *trap;
int fsid;
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
if (i < nr_merged_lower)
fsid = ovl_get_fsid(ofs, &l->path);
else
fsid = ovl_get_data_fsid(ofs);
if (fsid < 0)
return fsid;
/*
* Check if lower root conflicts with this overlay layers before
* checking if it is in-use as upperdir/workdir of "another"
* mount, because we do not bother to check in ovl_is_inuse() if
* the upperdir/workdir is in fact in-use by our
* upperdir/workdir.
*/
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
err = ovl_setup_trap(sb, l->path.dentry, &trap, "lowerdir");
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
if (err)
return err;
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
if (ovl_is_inuse(l->path.dentry)) {
ovl: fix regression caused by overlapping layers detection Once upon a time, commit 2cac0c00a6cd ("ovl: get exclusive ownership on upper/work dirs") in v4.13 added some sanity checks on overlayfs layers. This change caused a docker regression. The root cause was mount leaks by docker, which as far as I know, still exist. To mitigate the regression, commit 85fdee1eef1a ("ovl: fix regression caused by exclusive upper/work dir protection") in v4.14 turned the mount errors into warnings for the default index=off configuration. Recently, commit 146d62e5a586 ("ovl: detect overlapping layers") in v5.2, re-introduced exclusive upper/work dir checks regardless of index=off configuration. This changes the status quo and mount leak related bug reports have started to re-surface. Restore the status quo to fix the regressions. To clarify, index=off does NOT relax overlapping layers check for this ovelayfs mount. index=off only relaxes exclusive upper/work dir checks with another overlayfs mount. To cover the part of overlapping layers detection that used the exclusive upper/work dir checks to detect overlap with self upper/work dir, add a trap also on the work base dir. Link: https://github.com/moby/moby/issues/34672 Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/ Link: https://github.com/containers/libpod/issues/3540 Fixes: 146d62e5a586 ("ovl: detect overlapping layers") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Tested-by: Colin Walters <walters@verbum.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-07-12 12:24:34 +00:00
err = ovl_report_in_use(ofs, "lowerdir");
if (err) {
iput(trap);
return err;
}
ovl: fix regression caused by overlapping layers detection Once upon a time, commit 2cac0c00a6cd ("ovl: get exclusive ownership on upper/work dirs") in v4.13 added some sanity checks on overlayfs layers. This change caused a docker regression. The root cause was mount leaks by docker, which as far as I know, still exist. To mitigate the regression, commit 85fdee1eef1a ("ovl: fix regression caused by exclusive upper/work dir protection") in v4.14 turned the mount errors into warnings for the default index=off configuration. Recently, commit 146d62e5a586 ("ovl: detect overlapping layers") in v5.2, re-introduced exclusive upper/work dir checks regardless of index=off configuration. This changes the status quo and mount leak related bug reports have started to re-surface. Restore the status quo to fix the regressions. To clarify, index=off does NOT relax overlapping layers check for this ovelayfs mount. index=off only relaxes exclusive upper/work dir checks with another overlayfs mount. To cover the part of overlapping layers detection that used the exclusive upper/work dir checks to detect overlap with self upper/work dir, add a trap also on the work base dir. Link: https://github.com/moby/moby/issues/34672 Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/ Link: https://github.com/containers/libpod/issues/3540 Fixes: 146d62e5a586 ("ovl: detect overlapping layers") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Tested-by: Colin Walters <walters@verbum.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-07-12 12:24:34 +00:00
}
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
mnt = clone_private_mount(&l->path);
err = PTR_ERR(mnt);
if (IS_ERR(mnt)) {
pr_err("failed to clone lowerpath\n");
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
iput(trap);
return err;
}
/*
* Make lower layers R/O. That way fchmod/fchown on lower file
* will fail instead of modifying lower fs.
*/
mnt->mnt_flags |= MNT_READONLY | MNT_NOATIME;
layers[ofs->numlayer].trap = trap;
layers[ofs->numlayer].mnt = mnt;
layers[ofs->numlayer].idx = ofs->numlayer;
layers[ofs->numlayer].fsid = fsid;
layers[ofs->numlayer].fs = &ofs->fs[fsid];
/* Store for printing lowerdir=... in ovl_show_options() */
ofs->config.lowerdirs[ofs->numlayer] = l->name;
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
l->name = NULL;
ofs->numlayer++;
ofs->fs[fsid].is_lower = true;
}
ovl: add support for "xino" mount and config options With mount option "xino=on", mounter declares that there are enough free high bits in underlying fs to hold the layer fsid. If overlayfs does encounter underlying inodes using the high xino bits reserved for layer fsid, a warning will be emitted and the original inode number will be used. The mount option name "xino" goes after a similar meaning mount option of aufs, but in overlayfs case, the mapping is stateless. An example for a use case of "xino=on" is when upper/lower is on an xfs filesystem. xfs uses 64bit inode numbers, but it currently never uses the upper 8bit for inode numbers exposed via stat(2) and that is not likely to change in the future without user opting-in for a new xfs feature. The actual number of unused upper bit is much larger and determined by the xfs filesystem geometry (64 - agno_log - agblklog - inopblog). That means that for all practical purpose, there are enough unused bits in xfs inode numbers for more than OVL_MAX_STACK unique fsid's. Another use case of "xino=on" is when upper/lower is on tmpfs. tmpfs inode numbers are allocated sequentially since boot, so they will practially never use the high inode number bits. For compatibility with applications that expect 32bit inodes, the feature can be disabled with "xino=off". The option "xino=auto" automatically detects underlying filesystem that use 32bit inodes and enables the feature. The Kconfig option OVERLAY_FS_XINO_AUTO and module parameter of the same name, determine if the default mode for overlayfs mount is "xino=auto" or "xino=off". Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-03-29 06:08:18 +00:00
/*
* When all layers on same fs, overlay can use real inode numbers.
* With mount option "xino=<on|auto>", mounter declares that there are
* enough free high bits in underlying fs to hold the unique fsid.
ovl: add support for "xino" mount and config options With mount option "xino=on", mounter declares that there are enough free high bits in underlying fs to hold the layer fsid. If overlayfs does encounter underlying inodes using the high xino bits reserved for layer fsid, a warning will be emitted and the original inode number will be used. The mount option name "xino" goes after a similar meaning mount option of aufs, but in overlayfs case, the mapping is stateless. An example for a use case of "xino=on" is when upper/lower is on an xfs filesystem. xfs uses 64bit inode numbers, but it currently never uses the upper 8bit for inode numbers exposed via stat(2) and that is not likely to change in the future without user opting-in for a new xfs feature. The actual number of unused upper bit is much larger and determined by the xfs filesystem geometry (64 - agno_log - agblklog - inopblog). That means that for all practical purpose, there are enough unused bits in xfs inode numbers for more than OVL_MAX_STACK unique fsid's. Another use case of "xino=on" is when upper/lower is on tmpfs. tmpfs inode numbers are allocated sequentially since boot, so they will practially never use the high inode number bits. For compatibility with applications that expect 32bit inodes, the feature can be disabled with "xino=off". The option "xino=auto" automatically detects underlying filesystem that use 32bit inodes and enables the feature. The Kconfig option OVERLAY_FS_XINO_AUTO and module parameter of the same name, determine if the default mode for overlayfs mount is "xino=auto" or "xino=off". Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-03-29 06:08:18 +00:00
* If overlayfs does encounter underlying inodes using the high xino
* bits reserved for fsid, it emits a warning and uses the original
* inode number or a non persistent inode number allocated from a
* dedicated range.
ovl: add support for "xino" mount and config options With mount option "xino=on", mounter declares that there are enough free high bits in underlying fs to hold the layer fsid. If overlayfs does encounter underlying inodes using the high xino bits reserved for layer fsid, a warning will be emitted and the original inode number will be used. The mount option name "xino" goes after a similar meaning mount option of aufs, but in overlayfs case, the mapping is stateless. An example for a use case of "xino=on" is when upper/lower is on an xfs filesystem. xfs uses 64bit inode numbers, but it currently never uses the upper 8bit for inode numbers exposed via stat(2) and that is not likely to change in the future without user opting-in for a new xfs feature. The actual number of unused upper bit is much larger and determined by the xfs filesystem geometry (64 - agno_log - agblklog - inopblog). That means that for all practical purpose, there are enough unused bits in xfs inode numbers for more than OVL_MAX_STACK unique fsid's. Another use case of "xino=on" is when upper/lower is on tmpfs. tmpfs inode numbers are allocated sequentially since boot, so they will practially never use the high inode number bits. For compatibility with applications that expect 32bit inodes, the feature can be disabled with "xino=off". The option "xino=auto" automatically detects underlying filesystem that use 32bit inodes and enables the feature. The Kconfig option OVERLAY_FS_XINO_AUTO and module parameter of the same name, determine if the default mode for overlayfs mount is "xino=auto" or "xino=off". Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-03-29 06:08:18 +00:00
*/
if (ofs->numfs - !ovl_upper_mnt(ofs) == 1) {
if (ofs->config.xino == OVL_XINO_ON)
pr_info("\"xino=on\" is useless with all layers on same fs, ignore.\n");
ofs->xino_mode = 0;
} else if (ofs->config.xino == OVL_XINO_OFF) {
ofs->xino_mode = -1;
} else if (ofs->xino_mode < 0) {
ovl: add support for "xino" mount and config options With mount option "xino=on", mounter declares that there are enough free high bits in underlying fs to hold the layer fsid. If overlayfs does encounter underlying inodes using the high xino bits reserved for layer fsid, a warning will be emitted and the original inode number will be used. The mount option name "xino" goes after a similar meaning mount option of aufs, but in overlayfs case, the mapping is stateless. An example for a use case of "xino=on" is when upper/lower is on an xfs filesystem. xfs uses 64bit inode numbers, but it currently never uses the upper 8bit for inode numbers exposed via stat(2) and that is not likely to change in the future without user opting-in for a new xfs feature. The actual number of unused upper bit is much larger and determined by the xfs filesystem geometry (64 - agno_log - agblklog - inopblog). That means that for all practical purpose, there are enough unused bits in xfs inode numbers for more than OVL_MAX_STACK unique fsid's. Another use case of "xino=on" is when upper/lower is on tmpfs. tmpfs inode numbers are allocated sequentially since boot, so they will practially never use the high inode number bits. For compatibility with applications that expect 32bit inodes, the feature can be disabled with "xino=off". The option "xino=auto" automatically detects underlying filesystem that use 32bit inodes and enables the feature. The Kconfig option OVERLAY_FS_XINO_AUTO and module parameter of the same name, determine if the default mode for overlayfs mount is "xino=auto" or "xino=off". Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-03-29 06:08:18 +00:00
/*
* This is a roundup of number of bits needed for encoding
* fsid, where fsid 0 is reserved for upper fs (even with
* lower only overlay) +1 extra bit is reserved for the non
* persistent inode number range that is used for resolving
* xino lower bits overflow.
ovl: add support for "xino" mount and config options With mount option "xino=on", mounter declares that there are enough free high bits in underlying fs to hold the layer fsid. If overlayfs does encounter underlying inodes using the high xino bits reserved for layer fsid, a warning will be emitted and the original inode number will be used. The mount option name "xino" goes after a similar meaning mount option of aufs, but in overlayfs case, the mapping is stateless. An example for a use case of "xino=on" is when upper/lower is on an xfs filesystem. xfs uses 64bit inode numbers, but it currently never uses the upper 8bit for inode numbers exposed via stat(2) and that is not likely to change in the future without user opting-in for a new xfs feature. The actual number of unused upper bit is much larger and determined by the xfs filesystem geometry (64 - agno_log - agblklog - inopblog). That means that for all practical purpose, there are enough unused bits in xfs inode numbers for more than OVL_MAX_STACK unique fsid's. Another use case of "xino=on" is when upper/lower is on tmpfs. tmpfs inode numbers are allocated sequentially since boot, so they will practially never use the high inode number bits. For compatibility with applications that expect 32bit inodes, the feature can be disabled with "xino=off". The option "xino=auto" automatically detects underlying filesystem that use 32bit inodes and enables the feature. The Kconfig option OVERLAY_FS_XINO_AUTO and module parameter of the same name, determine if the default mode for overlayfs mount is "xino=auto" or "xino=off". Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-03-29 06:08:18 +00:00
*/
BUILD_BUG_ON(ilog2(OVL_MAX_STACK) > 30);
ofs->xino_mode = ilog2(ofs->numfs - 1) + 2;
ovl: add support for "xino" mount and config options With mount option "xino=on", mounter declares that there are enough free high bits in underlying fs to hold the layer fsid. If overlayfs does encounter underlying inodes using the high xino bits reserved for layer fsid, a warning will be emitted and the original inode number will be used. The mount option name "xino" goes after a similar meaning mount option of aufs, but in overlayfs case, the mapping is stateless. An example for a use case of "xino=on" is when upper/lower is on an xfs filesystem. xfs uses 64bit inode numbers, but it currently never uses the upper 8bit for inode numbers exposed via stat(2) and that is not likely to change in the future without user opting-in for a new xfs feature. The actual number of unused upper bit is much larger and determined by the xfs filesystem geometry (64 - agno_log - agblklog - inopblog). That means that for all practical purpose, there are enough unused bits in xfs inode numbers for more than OVL_MAX_STACK unique fsid's. Another use case of "xino=on" is when upper/lower is on tmpfs. tmpfs inode numbers are allocated sequentially since boot, so they will practially never use the high inode number bits. For compatibility with applications that expect 32bit inodes, the feature can be disabled with "xino=off". The option "xino=auto" automatically detects underlying filesystem that use 32bit inodes and enables the feature. The Kconfig option OVERLAY_FS_XINO_AUTO and module parameter of the same name, determine if the default mode for overlayfs mount is "xino=auto" or "xino=off". Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-03-29 06:08:18 +00:00
}
if (ofs->xino_mode > 0) {
pr_info("\"xino\" feature enabled using %d upper inode bits.\n",
ofs->xino_mode);
ovl: add support for "xino" mount and config options With mount option "xino=on", mounter declares that there are enough free high bits in underlying fs to hold the layer fsid. If overlayfs does encounter underlying inodes using the high xino bits reserved for layer fsid, a warning will be emitted and the original inode number will be used. The mount option name "xino" goes after a similar meaning mount option of aufs, but in overlayfs case, the mapping is stateless. An example for a use case of "xino=on" is when upper/lower is on an xfs filesystem. xfs uses 64bit inode numbers, but it currently never uses the upper 8bit for inode numbers exposed via stat(2) and that is not likely to change in the future without user opting-in for a new xfs feature. The actual number of unused upper bit is much larger and determined by the xfs filesystem geometry (64 - agno_log - agblklog - inopblog). That means that for all practical purpose, there are enough unused bits in xfs inode numbers for more than OVL_MAX_STACK unique fsid's. Another use case of "xino=on" is when upper/lower is on tmpfs. tmpfs inode numbers are allocated sequentially since boot, so they will practially never use the high inode number bits. For compatibility with applications that expect 32bit inodes, the feature can be disabled with "xino=off". The option "xino=auto" automatically detects underlying filesystem that use 32bit inodes and enables the feature. The Kconfig option OVERLAY_FS_XINO_AUTO and module parameter of the same name, determine if the default mode for overlayfs mount is "xino=auto" or "xino=off". Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-03-29 06:08:18 +00:00
}
return 0;
}
static struct ovl_entry *ovl_get_lowerstack(struct super_block *sb,
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
struct ovl_fs_context *ctx,
struct ovl_fs *ofs,
struct ovl_layer *layers)
{
int err;
unsigned int i;
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
size_t nr_merged_lower;
struct ovl_entry *oe;
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
struct ovl_path *lowerstack;
struct ovl_fs_context_layer *l;
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
if (!ofs->config.upperdir && ctx->nr == 1) {
pr_err("at least 2 lowerdir are needed while upperdir nonexistent\n");
return ERR_PTR(-EINVAL);
}
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
err = -EINVAL;
for (i = 0; i < ctx->nr; i++) {
l = &ctx->lower[i];
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
err = ovl_lower_dir(l->name, &l->path, ofs, &sb->s_stack_depth);
if (err)
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
return ERR_PTR(err);
}
err = -EINVAL;
sb->s_stack_depth++;
if (sb->s_stack_depth > FILESYSTEM_MAX_STACK_DEPTH) {
pr_err("maximum fs stacking depth exceeded\n");
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
return ERR_PTR(err);
}
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
err = ovl_get_layers(sb, ofs, ctx, layers);
if (err)
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
return ERR_PTR(err);
err = -ENOMEM;
/* Data-only layers are not merged in root directory */
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
nr_merged_lower = ctx->nr - ctx->nr_data;
oe = ovl_alloc_entry(nr_merged_lower);
if (!oe)
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
return ERR_PTR(err);
lowerstack = ovl_lowerstack(oe);
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
for (i = 0; i < nr_merged_lower; i++) {
l = &ctx->lower[i];
lowerstack[i].dentry = dget(l->path.dentry);
lowerstack[i].layer = &ofs->layers[i + 1];
}
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
ofs->numdatalayer = ctx->nr_data;
return oe;
}
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
/*
* Check if this layer root is a descendant of:
* - another layer of this overlayfs instance
* - upper/work dir of any overlayfs instance
*/
ovl: fix regression caused by overlapping layers detection Once upon a time, commit 2cac0c00a6cd ("ovl: get exclusive ownership on upper/work dirs") in v4.13 added some sanity checks on overlayfs layers. This change caused a docker regression. The root cause was mount leaks by docker, which as far as I know, still exist. To mitigate the regression, commit 85fdee1eef1a ("ovl: fix regression caused by exclusive upper/work dir protection") in v4.14 turned the mount errors into warnings for the default index=off configuration. Recently, commit 146d62e5a586 ("ovl: detect overlapping layers") in v5.2, re-introduced exclusive upper/work dir checks regardless of index=off configuration. This changes the status quo and mount leak related bug reports have started to re-surface. Restore the status quo to fix the regressions. To clarify, index=off does NOT relax overlapping layers check for this ovelayfs mount. index=off only relaxes exclusive upper/work dir checks with another overlayfs mount. To cover the part of overlapping layers detection that used the exclusive upper/work dir checks to detect overlap with self upper/work dir, add a trap also on the work base dir. Link: https://github.com/moby/moby/issues/34672 Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/ Link: https://github.com/containers/libpod/issues/3540 Fixes: 146d62e5a586 ("ovl: detect overlapping layers") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Tested-by: Colin Walters <walters@verbum.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-07-12 12:24:34 +00:00
static int ovl_check_layer(struct super_block *sb, struct ovl_fs *ofs,
struct dentry *dentry, const char *name,
bool is_lower)
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
{
struct dentry *next = dentry, *parent;
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
int err = 0;
if (!dentry)
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
return 0;
parent = dget_parent(next);
/* Walk back ancestors to root (inclusive) looking for traps */
while (!err && parent != next) {
if (is_lower && ovl_lookup_trap_inode(sb, parent)) {
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
err = -ELOOP;
pr_err("overlapping %s path\n", name);
ovl: fix regression caused by overlapping layers detection Once upon a time, commit 2cac0c00a6cd ("ovl: get exclusive ownership on upper/work dirs") in v4.13 added some sanity checks on overlayfs layers. This change caused a docker regression. The root cause was mount leaks by docker, which as far as I know, still exist. To mitigate the regression, commit 85fdee1eef1a ("ovl: fix regression caused by exclusive upper/work dir protection") in v4.14 turned the mount errors into warnings for the default index=off configuration. Recently, commit 146d62e5a586 ("ovl: detect overlapping layers") in v5.2, re-introduced exclusive upper/work dir checks regardless of index=off configuration. This changes the status quo and mount leak related bug reports have started to re-surface. Restore the status quo to fix the regressions. To clarify, index=off does NOT relax overlapping layers check for this ovelayfs mount. index=off only relaxes exclusive upper/work dir checks with another overlayfs mount. To cover the part of overlapping layers detection that used the exclusive upper/work dir checks to detect overlap with self upper/work dir, add a trap also on the work base dir. Link: https://github.com/moby/moby/issues/34672 Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/ Link: https://github.com/containers/libpod/issues/3540 Fixes: 146d62e5a586 ("ovl: detect overlapping layers") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Tested-by: Colin Walters <walters@verbum.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-07-12 12:24:34 +00:00
} else if (ovl_is_inuse(parent)) {
err = ovl_report_in_use(ofs, name);
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
}
next = parent;
parent = dget_parent(next);
dput(next);
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
}
dput(parent);
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
return err;
}
/*
* Check if any of the layers or work dirs overlap.
*/
static int ovl_check_overlapping_layers(struct super_block *sb,
struct ovl_fs *ofs)
{
int i, err;
if (ovl_upper_mnt(ofs)) {
err = ovl_check_layer(sb, ofs, ovl_upper_mnt(ofs)->mnt_root,
"upperdir", false);
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
if (err)
return err;
/*
* Checking workbasedir avoids hitting ovl_is_inuse(parent) of
* this instance and covers overlapping work and index dirs,
* unless work or index dir have been moved since created inside
* workbasedir. In that case, we already have their traps in
* inode cache and we will catch that case on lookup.
*/
err = ovl_check_layer(sb, ofs, ofs->workbasedir, "workdir",
false);
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
if (err)
return err;
}
for (i = 1; i < ofs->numlayer; i++) {
ovl: fix regression caused by overlapping layers detection Once upon a time, commit 2cac0c00a6cd ("ovl: get exclusive ownership on upper/work dirs") in v4.13 added some sanity checks on overlayfs layers. This change caused a docker regression. The root cause was mount leaks by docker, which as far as I know, still exist. To mitigate the regression, commit 85fdee1eef1a ("ovl: fix regression caused by exclusive upper/work dir protection") in v4.14 turned the mount errors into warnings for the default index=off configuration. Recently, commit 146d62e5a586 ("ovl: detect overlapping layers") in v5.2, re-introduced exclusive upper/work dir checks regardless of index=off configuration. This changes the status quo and mount leak related bug reports have started to re-surface. Restore the status quo to fix the regressions. To clarify, index=off does NOT relax overlapping layers check for this ovelayfs mount. index=off only relaxes exclusive upper/work dir checks with another overlayfs mount. To cover the part of overlapping layers detection that used the exclusive upper/work dir checks to detect overlap with self upper/work dir, add a trap also on the work base dir. Link: https://github.com/moby/moby/issues/34672 Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/ Link: https://github.com/containers/libpod/issues/3540 Fixes: 146d62e5a586 ("ovl: detect overlapping layers") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Tested-by: Colin Walters <walters@verbum.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-07-12 12:24:34 +00:00
err = ovl_check_layer(sb, ofs,
ofs->layers[i].mnt->mnt_root,
"lowerdir", true);
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
if (err)
return err;
}
return 0;
}
static struct dentry *ovl_get_root(struct super_block *sb,
struct dentry *upperdentry,
struct ovl_entry *oe)
{
struct dentry *root;
struct ovl_fs *ofs = OVL_FS(sb);
struct ovl_path *lowerpath = ovl_lowerstack(oe);
unsigned long ino = d_inode(lowerpath->dentry)->i_ino;
int fsid = lowerpath->layer->fsid;
struct ovl_inode_params oip = {
.upperdentry = upperdentry,
.oe = oe,
};
root = d_make_root(ovl_new_inode(sb, S_IFDIR, 0));
if (!root)
return NULL;
if (upperdentry) {
/* Root inode uses upper st_ino/i_ino */
ino = d_inode(upperdentry)->i_ino;
fsid = 0;
ovl_dentry_set_upper_alias(root);
if (ovl_is_impuredir(sb, upperdentry))
ovl_set_flag(OVL_IMPURE, d_inode(root));
}
/* Look for xwhiteouts marker except in the lowermost layer */
for (int i = 0; i < ovl_numlower(oe) - 1; i++, lowerpath++) {
struct path path = {
.mnt = lowerpath->layer->mnt,
.dentry = lowerpath->dentry,
};
/* overlay.opaque=x means xwhiteouts directory */
if (ovl_get_opaquedir_val(ofs, &path) == 'x') {
ovl_layer_set_xwhiteouts(ofs, lowerpath->layer);
ovl_dentry_set_xwhiteouts(root);
}
}
/* Root is always merge -> can have whiteouts */
ovl_set_flag(OVL_WHITEOUTS, d_inode(root));
ovl_dentry_set_flag(OVL_E_CONNECTED, root);
ovl_set_upperdata(d_inode(root));
ovl_inode_init(d_inode(root), &oip, ino, fsid);
ovl_dentry_init_flags(root, upperdentry, oe, DCACHE_OP_WEAK_REVALIDATE);
/* root keeps a reference of upperdentry */
dget(upperdentry);
return root;
}
int ovl_fill_super(struct super_block *sb, struct fs_context *fc)
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
{
struct ovl_fs *ofs = sb->s_fs_info;
struct ovl_fs_context *ctx = fc->fs_private;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
struct dentry *root_dentry;
struct ovl_entry *oe;
struct ovl_layer *layers;
struct cred *cred;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
int err;
err = -EIO;
if (WARN_ON(fc->user_ns != current_user_ns()))
goto out_err;
sb->s_d_op = &ovl_dentry_operations;
err = -ENOMEM;
ofs->creator_cred = cred = prepare_creds();
if (!cred)
goto out_err;
err = ovl_fs_params_verify(ctx, &ofs->config);
if (err)
goto out_err;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
err = -EINVAL;
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
if (ctx->nr == 0) {
if (!(fc->sb_flags & SB_SILENT))
pr_err("missing 'lowerdir'\n");
goto out_err;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
}
err = -ENOMEM;
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
layers = kcalloc(ctx->nr + 1, sizeof(struct ovl_layer), GFP_KERNEL);
if (!layers)
goto out_err;
ofs->config.lowerdirs = kcalloc(ctx->nr + 1, sizeof(char *), GFP_KERNEL);
if (!ofs->config.lowerdirs) {
kfree(layers);
goto out_err;
}
ofs->layers = layers;
/*
* Layer 0 is reserved for upper even if there's no upper.
* config.lowerdirs[0] is used for storing the user provided colon
* separated lowerdir string.
*/
ofs->config.lowerdirs[0] = ctx->lowerdir_all;
ctx->lowerdir_all = NULL;
ofs->numlayer = 1;
sb->s_stack_depth = 0;
sb->s_maxbytes = MAX_LFS_FILESIZE;
atomic_long_set(&ofs->last_ino, 1);
/* Assume underlying fs uses 32bit inodes unless proven otherwise */
if (ofs->config.xino != OVL_XINO_OFF) {
ofs->xino_mode = BITS_PER_LONG - 32;
if (!ofs->xino_mode) {
pr_warn("xino not supported on 32bit kernel, falling back to xino=off.\n");
ofs->config.xino = OVL_XINO_OFF;
}
}
ovl: add support for "xino" mount and config options With mount option "xino=on", mounter declares that there are enough free high bits in underlying fs to hold the layer fsid. If overlayfs does encounter underlying inodes using the high xino bits reserved for layer fsid, a warning will be emitted and the original inode number will be used. The mount option name "xino" goes after a similar meaning mount option of aufs, but in overlayfs case, the mapping is stateless. An example for a use case of "xino=on" is when upper/lower is on an xfs filesystem. xfs uses 64bit inode numbers, but it currently never uses the upper 8bit for inode numbers exposed via stat(2) and that is not likely to change in the future without user opting-in for a new xfs feature. The actual number of unused upper bit is much larger and determined by the xfs filesystem geometry (64 - agno_log - agblklog - inopblog). That means that for all practical purpose, there are enough unused bits in xfs inode numbers for more than OVL_MAX_STACK unique fsid's. Another use case of "xino=on" is when upper/lower is on tmpfs. tmpfs inode numbers are allocated sequentially since boot, so they will practially never use the high inode number bits. For compatibility with applications that expect 32bit inodes, the feature can be disabled with "xino=off". The option "xino=auto" automatically detects underlying filesystem that use 32bit inodes and enables the feature. The Kconfig option OVERLAY_FS_XINO_AUTO and module parameter of the same name, determine if the default mode for overlayfs mount is "xino=auto" or "xino=off". Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-03-29 06:08:18 +00:00
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
/* alloc/destroy_inode needed for setting up traps in inode cache */
sb->s_op = &ovl_super_operations;
if (ofs->config.upperdir) {
ovl: implement volatile-specific fsync error behaviour Overlayfs's volatile option allows the user to bypass all forced sync calls to the upperdir filesystem. This comes at the cost of safety. We can never ensure that the user's data is intact, but we can make a best effort to expose whether or not the data is likely to be in a bad state. The best way to handle this in the time being is that if an overlayfs's upperdir experiences an error after a volatile mount occurs, that error will be returned on fsync, fdatasync, sync, and syncfs. This is contradictory to the traditional behaviour of VFS which fails the call once, and only raises an error if a subsequent fsync error has occurred, and been raised by the filesystem. One awkward aspect of the patch is that we have to manually set the superblock's errseq_t after the sync_fs callback as opposed to just returning an error from syncfs. This is because the call chain looks something like this: sys_syncfs -> sync_filesystem -> __sync_filesystem -> /* The return value is ignored here sb->s_op->sync_fs(sb) _sync_blockdev /* Where the VFS fetches the error to raise to userspace */ errseq_check_and_advance Because of this we call errseq_set every time the sync_fs callback occurs. Due to the nature of this seen / unseen dichotomy, if the upperdir is an inconsistent state at the initial mount time, overlayfs will refuse to mount, as overlayfs cannot get a snapshot of the upperdir's errseq that will increment on error until the user calls syncfs. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Suggested-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Fixes: c86243b090bc ("ovl: provide a mount option "volatile"") Cc: stable@vger.kernel.org Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-01-08 00:10:43 +00:00
struct super_block *upper_sb;
err = -EINVAL;
if (!ofs->config.workdir) {
pr_err("missing 'workdir'\n");
goto out_err;
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
err = ovl_get_upper(sb, ofs, &layers[0], &ctx->upper);
if (err)
goto out_err;
ovl: implement volatile-specific fsync error behaviour Overlayfs's volatile option allows the user to bypass all forced sync calls to the upperdir filesystem. This comes at the cost of safety. We can never ensure that the user's data is intact, but we can make a best effort to expose whether or not the data is likely to be in a bad state. The best way to handle this in the time being is that if an overlayfs's upperdir experiences an error after a volatile mount occurs, that error will be returned on fsync, fdatasync, sync, and syncfs. This is contradictory to the traditional behaviour of VFS which fails the call once, and only raises an error if a subsequent fsync error has occurred, and been raised by the filesystem. One awkward aspect of the patch is that we have to manually set the superblock's errseq_t after the sync_fs callback as opposed to just returning an error from syncfs. This is because the call chain looks something like this: sys_syncfs -> sync_filesystem -> __sync_filesystem -> /* The return value is ignored here sb->s_op->sync_fs(sb) _sync_blockdev /* Where the VFS fetches the error to raise to userspace */ errseq_check_and_advance Because of this we call errseq_set every time the sync_fs callback occurs. Due to the nature of this seen / unseen dichotomy, if the upperdir is an inconsistent state at the initial mount time, overlayfs will refuse to mount, as overlayfs cannot get a snapshot of the upperdir's errseq that will increment on error until the user calls syncfs. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Suggested-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Fixes: c86243b090bc ("ovl: provide a mount option "volatile"") Cc: stable@vger.kernel.org Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-01-08 00:10:43 +00:00
upper_sb = ovl_upper_mnt(ofs)->mnt_sb;
if (!ovl_should_sync(ofs)) {
ofs->errseq = errseq_sample(&upper_sb->s_wb_err);
if (errseq_check(&upper_sb->s_wb_err, ofs->errseq)) {
err = -EIO;
pr_err("Cannot mount volatile when upperdir has an unseen error. Sync upperdir fs to clear state.\n");
goto out_err;
}
}
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
err = ovl_get_workdir(sb, ofs, &ctx->upper, &ctx->work);
if (err)
goto out_err;
if (!ofs->workdir)
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 21:05:09 +00:00
sb->s_flags |= SB_RDONLY;
ovl: implement volatile-specific fsync error behaviour Overlayfs's volatile option allows the user to bypass all forced sync calls to the upperdir filesystem. This comes at the cost of safety. We can never ensure that the user's data is intact, but we can make a best effort to expose whether or not the data is likely to be in a bad state. The best way to handle this in the time being is that if an overlayfs's upperdir experiences an error after a volatile mount occurs, that error will be returned on fsync, fdatasync, sync, and syncfs. This is contradictory to the traditional behaviour of VFS which fails the call once, and only raises an error if a subsequent fsync error has occurred, and been raised by the filesystem. One awkward aspect of the patch is that we have to manually set the superblock's errseq_t after the sync_fs callback as opposed to just returning an error from syncfs. This is because the call chain looks something like this: sys_syncfs -> sync_filesystem -> __sync_filesystem -> /* The return value is ignored here sb->s_op->sync_fs(sb) _sync_blockdev /* Where the VFS fetches the error to raise to userspace */ errseq_check_and_advance Because of this we call errseq_set every time the sync_fs callback occurs. Due to the nature of this seen / unseen dichotomy, if the upperdir is an inconsistent state at the initial mount time, overlayfs will refuse to mount, as overlayfs cannot get a snapshot of the upperdir's errseq that will increment on error until the user calls syncfs. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Suggested-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Fixes: c86243b090bc ("ovl: provide a mount option "volatile"") Cc: stable@vger.kernel.org Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-01-08 00:10:43 +00:00
sb->s_stack_depth = upper_sb->s_stack_depth;
sb->s_time_gran = upper_sb->s_time_gran;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
}
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
oe = ovl_get_lowerstack(sb, ctx, ofs, layers);
err = PTR_ERR(oe);
if (IS_ERR(oe))
goto out_err;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
/* If the upper fs is nonexistent, we mark overlayfs r/o too */
if (!ovl_upper_mnt(ofs))
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 21:05:09 +00:00
sb->s_flags |= SB_RDONLY;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
if (!ovl_origin_uuid(ofs) && ofs->numfs > 1) {
pr_warn("The uuid=off requires a single fs for lower and upper, falling back to uuid=null.\n");
ofs->config.uuid = OVL_UUID_NULL;
} else if (ovl_has_fsid(ofs) && ovl_upper_mnt(ofs)) {
/* Use per instance persistent uuid/fsid */
ovl_init_uuid_xattr(sb, ofs, &ctx->upper);
ovl: introduce new "uuid=off" option for inodes index feature This replaces uuid with null in overlayfs file handles and thus relaxes uuid checks for overlay index feature. It is only possible in case there is only one filesystem for all the work/upper/lower directories and bare file handles from this backing filesystem are unique. In other case when we have multiple filesystems lets just fallback to "uuid=on" which is and equivalent of how it worked before with all uuid checks. This is needed when overlayfs is/was mounted in a container with index enabled (e.g.: to be able to resolve inotify watch file handles on it to paths in CRIU), and this container is copied and started alongside with the original one. This way the "copy" container can't have the same uuid on the superblock and mounting the overlayfs from it later would fail. That is an example of the problem on top of loop+ext4: dd if=/dev/zero of=loopbackfile.img bs=100M count=10 losetup -fP loopbackfile.img losetup -a #/dev/loop0: [64768]:35 (/loop-test/loopbackfile.img) mkfs.ext4 loopbackfile.img mkdir loop-mp mount -o loop /dev/loop0 loop-mp mkdir loop-mp/{lower,upper,work,merged} mount -t overlay overlay -oindex=on,lowerdir=loop-mp/lower,\ upperdir=loop-mp/upper,workdir=loop-mp/work loop-mp/merged umount loop-mp/merged umount loop-mp e2fsck -f /dev/loop0 tune2fs -U random /dev/loop0 mount -o loop /dev/loop0 loop-mp mount -t overlay overlay -oindex=on,lowerdir=loop-mp/lower,\ upperdir=loop-mp/upper,workdir=loop-mp/work loop-mp/merged #mount: /loop-test/loop-mp/merged: #mount(2) system call failed: Stale file handle. If you just change the uuid of the backing filesystem, overlay is not mounting any more. In Virtuozzo we copy container disks (ploops) when create the copy of container and we require fs uuid to be unique for a new container. Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-10-13 14:59:54 +00:00
}
if (!ovl_force_readonly(ofs) && ofs->config.index) {
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
err = ovl_get_indexdir(sb, ofs, oe, &ctx->upper);
if (err)
goto out_free_oe;
/* Force r/o mount with no index dir */
if (!ofs->workdir)
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 21:05:09 +00:00
sb->s_flags |= SB_RDONLY;
}
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 14:42:08 +00:00
err = ovl_check_overlapping_layers(sb, ofs);
if (err)
goto out_free_oe;
/* Show index=off in /proc/mounts for forced r/o mount */
if (!ofs->workdir) {
ofs->config.index = false;
if (ovl_upper_mnt(ofs) && ofs->config.nfs_export) {
pr_warn("NFS export requires an index dir, falling back to nfs_export=off.\n");
ofs->config.nfs_export = false;
}
}
if (ofs->config.metacopy && ofs->config.nfs_export) {
pr_warn("NFS export is not supported with metadata only copy up, falling back to nfs_export=off.\n");
ofs->config.nfs_export = false;
}
/*
* Support encoding decodable file handles with nfs_export=on
* and encoding non-decodable file handles with nfs_export=off
* if all layers support file handles.
*/
if (ofs->config.nfs_export)
sb->s_export_op = &ovl_export_operations;
else if (!ofs->nofh)
sb->s_export_op = &ovl_export_fid_operations;
/* Never override disk quota limits or use reserved space */
cap_lower(cred->cap_effective, CAP_SYS_RESOURCE);
sb->s_magic = OVERLAYFS_SUPER_MAGIC;
sb->s_xattr = ovl_xattr_handlers(ofs);
sb->s_fs_info = ofs;
#ifdef CONFIG_FS_POSIX_ACL
sb->s_flags |= SB_POSIXACL;
#endif
sb->s_iflags |= SB_I_SKIP_SYNC;
/*
* Ensure that umask handling is done by the filesystems used
* for the the upper layer instead of overlayfs as that would
* lead to unexpected results.
*/
sb->s_iflags |= SB_I_NOUMASK;
sb->s_iflags |= SB_I_EVM_HMAC_UNSUPPORTED;
err = -ENOMEM;
ovl: modify layer parameter parsing We ran into issues where mount(8) passed multiple lower layers as one big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING option is limited to 256 bytes in strndup_user(). While this would be fixable by extending the fsconfig() buffer I'd rather encourage users to append layers via multiple fsconfig() calls as the interface allows nicely for this. This has also been requested as a feature before. With this port to the new mount api the following will be possible: fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0); /* set upper layer */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0); /* append "/lower2", "/lower3", and "/lower4" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0); /* turn index feature on */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0); /* append "/lower5" */ fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0); Specifying ':' would have been rejected so this isn't a regression. And we can't simply use "lowerdir=/lower" to append on top of existing layers as "lowerdir=/lower,lowerdir=/other-lower" would make "/other-lower" the only lower layer so we'd break uapi if we changed this. So the ':' prefix seems a good compromise. Users can choose to specify multiple layers at once or individual layers. A layer is appended if it starts with ":". This requires that the user has already added at least one layer before. If lowerdir is specified again without a leading ":" then all previous layers are dropped and replaced with the new layers. If lowerdir is specified and empty than all layers are simply dropped. An additional change is that overlayfs will now parse and resolve layers right when they are specified in fsconfig() instead of deferring until super block creation. This allows users to receive early errors. It also allows users to actually use up to 500 layers something which was theoretically possible but ended up not working due to the mount option string passed via mount(2) being too large. This also allows a more privileged process to set config options for a lesser privileged process as the creds for fsconfig() and the creds for fsopen() can differ. We could restrict that they match by enforcing that the creds of fsopen() and fsconfig() match but I don't see why that needs to be the case and allows for a good delegation mechanism. Plus, in the future it means we're able to extend overlayfs mount options and allow users to specify layers via file descriptors instead of paths: fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd); /* append */ fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd); /* clear all layers specified until now */ fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0); This would be especially nice if users create an overlayfs mount on top of idmapped layers or just in general private mounts created via open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear anywhere in the filesystem. But for now just do the minimal thing. We should probably aim to move more validation into ovl_fs_parse_param() so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can be done in additional patches later. This is now also rebased on top of the lazy lowerdata lookup which allows the specificatin of data only layers using the new "::" syntax. The rules are simple. A data only layers cannot be followed by any regular layers and data layers must be preceeded by at least one regular layer. Parsing the lowerdir mount option must change because of this. The original patchset used the old lowerdir parsing function to split a lowerdir mount option string such as: lowerdir=/lower1:/lower2::/lower3::/lower4 simply replacing each non-escaped ":" by "\0". So sequences of non-escaped ":" were counted as layers. For example, the previous lowerdir mount option above would've counted 6 layers instead of 4 and a lowerdir mount option such as: lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::" would be counted as 33 layers. Other than being ugly this didn't matter much because kern_path() would reject the first "\0" layer. However, this overcounting of layers becomes problematic when we base allocations on it where we very much only want to allocate space for 4 layers instead of 33. So the new parsing function rejects non-escaped sequences of colons other than ":" and "::" immediately instead of relying on kern_path(). Link: https://github.com/util-linux/util-linux/issues/2287 Link: https://github.com/util-linux/util-linux/issues/1992 Link: https://bugs.archlinux.org/task/78702 Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-06-16 13:54:19 +00:00
root_dentry = ovl_get_root(sb, ctx->upper.dentry, oe);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
if (!root_dentry)
goto out_free_oe;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
sb->s_root = root_dentry;
return 0;
out_free_oe:
ovl_free_entry(oe);
out_err:
ovl_free_fs(ofs);
sb->s_fs_info = NULL;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
return err;
}
struct file_system_type ovl_fs_type = {
.owner = THIS_MODULE,
.name = "overlay",
.init_fs_context = ovl_init_fs_context,
.parameters = ovl_parameter_spec,
.fs_flags = FS_USERNS_MOUNT,
.kill_sb = kill_anon_super,
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
};
MODULE_ALIAS_FS("overlay");
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
static void ovl_inode_init_once(void *foo)
{
struct ovl_inode *oi = foo;
inode_init_once(&oi->vfs_inode);
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
static int __init ovl_init(void)
{
int err;
ovl_inode_cachep = kmem_cache_create("ovl_inode",
sizeof(struct ovl_inode), 0,
(SLAB_RECLAIM_ACCOUNT|
SLAB_ACCOUNT),
ovl_inode_init_once);
if (ovl_inode_cachep == NULL)
return -ENOMEM;
err = register_filesystem(&ovl_fs_type);
if (!err)
return 0;
kmem_cache_destroy(ovl_inode_cachep);
return err;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
}
static void __exit ovl_exit(void)
{
unregister_filesystem(&ovl_fs_type);
/*
* Make sure all delayed rcu free inodes are flushed before we
* destroy cache.
*/
rcu_barrier();
kmem_cache_destroy(ovl_inode_cachep);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 22:14:38 +00:00
}
module_init(ovl_init);
module_exit(ovl_exit);