linux-stable/kernel/dma/swiotlb.c

1884 lines
53 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Dynamic DMA mapping support.
*
* This implementation is a fallback for platforms that do not support
* I/O TLBs (aka DMA address translation hardware).
* Copyright (C) 2000 Asit Mallick <Asit.K.Mallick@intel.com>
* Copyright (C) 2000 Goutham Rao <goutham.rao@intel.com>
* Copyright (C) 2000, 2003 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
*
* 03/05/07 davidm Switch from PCI-DMA to generic device DMA API.
* 00/12/13 davidm Rename to swiotlb.c and add mark_clean() to avoid
* unnecessary i-cache flushing.
* 04/07/.. ak Better overflow handling. Assorted fixes.
* 05/09/10 linville Add support for syncing ranges, support syncing for
* DMA_BIDIRECTIONAL mappings, miscellaneous cleanup.
* 08/12/11 beckyb Add highmem support
*/
#define pr_fmt(fmt) "software IO TLB: " fmt
#include <linux/cache.h>
#include <linux/cc_platform.h>
#include <linux/ctype.h>
#include <linux/debugfs.h>
#include <linux/dma-direct.h>
#include <linux/dma-map-ops.h>
#include <linux/export.h>
#include <linux/gfp.h>
#include <linux/highmem.h>
#include <linux/io.h>
#include <linux/iommu-helper.h>
#include <linux/init.h>
#include <linux/memblock.h>
#include <linux/mm.h>
#include <linux/pfn.h>
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
#include <linux/rculist.h>
#include <linux/scatterlist.h>
#include <linux/set_memory.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/swiotlb.h>
#include <linux/types.h>
#ifdef CONFIG_DMA_RESTRICTED_POOL
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/of_reserved_mem.h>
#include <linux/slab.h>
#endif
#define CREATE_TRACE_POINTS
#include <trace/events/swiotlb.h>
#define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT))
/*
* Minimum IO TLB size to bother booting with. Systems with mainly
* 64bit capable cards will only lightly use the swiotlb. If we can't
* allocate a contiguous 1MB, we're probably in trouble anyway.
*/
#define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT)
#define INVALID_PHYS_ADDR (~(phys_addr_t)0)
/**
* struct io_tlb_slot - IO TLB slot descriptor
* @orig_addr: The original address corresponding to a mapped entry.
* @alloc_size: Size of the allocated buffer.
* @list: The free list describing the number of free entries available
* from each index.
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary Allow a buffer pre-padding of up to alloc_align_mask, even if it requires allocating additional IO TLB slots. If the allocation alignment is bigger than IO_TLB_SIZE and min_align_mask covers any non-zero bits in the original address between IO_TLB_SIZE and alloc_align_mask, these bits are not preserved in the swiotlb buffer address. To fix this case, increase the allocation size and use a larger offset within the allocated buffer. As a result, extra padding slots may be allocated before the mapping start address. Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR. These slots do not correspond to any CPU buffer, so attempts to sync the data should be ignored. The padding slots should be automatically released when the buffer is unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the DMA buffer slot, not the first padding slot. Save the number of padding slots in struct io_tlb_slot and use it to adjust the slot index in swiotlb_release_slots(), so all allocated slots are properly freed. Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present") Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/ Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-25 08:31:04 +00:00
* @pad_slots: Number of preceding padding slots. Valid only in the first
* allocated non-padding slot.
*/
struct io_tlb_slot {
phys_addr_t orig_addr;
size_t alloc_size;
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary Allow a buffer pre-padding of up to alloc_align_mask, even if it requires allocating additional IO TLB slots. If the allocation alignment is bigger than IO_TLB_SIZE and min_align_mask covers any non-zero bits in the original address between IO_TLB_SIZE and alloc_align_mask, these bits are not preserved in the swiotlb buffer address. To fix this case, increase the allocation size and use a larger offset within the allocated buffer. As a result, extra padding slots may be allocated before the mapping start address. Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR. These slots do not correspond to any CPU buffer, so attempts to sync the data should be ignored. The padding slots should be automatically released when the buffer is unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the DMA buffer slot, not the first padding slot. Save the number of padding slots in struct io_tlb_slot and use it to adjust the slot index in swiotlb_release_slots(), so all allocated slots are properly freed. Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present") Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/ Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-25 08:31:04 +00:00
unsigned short list;
unsigned short pad_slots;
};
static bool swiotlb_force_bounce;
static bool swiotlb_force_disable;
#ifdef CONFIG_SWIOTLB_DYNAMIC
static void swiotlb_dyn_alloc(struct work_struct *work);
static struct io_tlb_mem io_tlb_default_mem = {
.lock = __SPIN_LOCK_UNLOCKED(io_tlb_default_mem.lock),
.pools = LIST_HEAD_INIT(io_tlb_default_mem.pools),
.dyn_alloc = __WORK_INITIALIZER(io_tlb_default_mem.dyn_alloc,
swiotlb_dyn_alloc),
};
#else /* !CONFIG_SWIOTLB_DYNAMIC */
static struct io_tlb_mem io_tlb_default_mem;
#endif /* CONFIG_SWIOTLB_DYNAMIC */
static unsigned long default_nslabs = IO_TLB_DEFAULT_SIZE >> IO_TLB_SHIFT;
static unsigned long default_nareas;
/**
* struct io_tlb_area - IO TLB memory area descriptor
*
* This is a single area with a single lock.
*
* @used: The number of used IO TLB block.
* @index: The slot index to start searching in this area for next round.
* @lock: The lock to protect the above data structures in the map and
* unmap calls.
*/
struct io_tlb_area {
unsigned long used;
unsigned int index;
spinlock_t lock;
};
/*
* Round up number of slabs to the next power of 2. The last area is going
* be smaller than the rest if default_nslabs is not power of two.
* The number of slot in an area should be a multiple of IO_TLB_SEGSIZE,
* otherwise a segment may span two or more areas. It conflicts with free
* contiguous slots tracking: free slots are treated contiguous no matter
* whether they cross an area boundary.
*
* Return true if default_nslabs is rounded up.
*/
static bool round_up_default_nslabs(void)
{
if (!default_nareas)
return false;
if (default_nslabs < IO_TLB_SEGSIZE * default_nareas)
default_nslabs = IO_TLB_SEGSIZE * default_nareas;
else if (is_power_of_2(default_nslabs))
return false;
default_nslabs = roundup_pow_of_two(default_nslabs);
return true;
}
/**
* swiotlb_adjust_nareas() - adjust the number of areas and slots
* @nareas: Desired number of areas. Zero is treated as 1.
*
* Adjust the default number of areas in a memory pool.
* The default size of the memory pool may also change to meet minimum area
* size requirements.
*/
static void swiotlb_adjust_nareas(unsigned int nareas)
{
if (!nareas)
nareas = 1;
else if (!is_power_of_2(nareas))
nareas = roundup_pow_of_two(nareas);
default_nareas = nareas;
pr_info("area num %d.\n", nareas);
if (round_up_default_nslabs())
pr_info("SWIOTLB bounce buffer size roundup to %luMB",
(default_nslabs << IO_TLB_SHIFT) >> 20);
}
/**
* limit_nareas() - get the maximum number of areas for a given memory pool size
* @nareas: Desired number of areas.
* @nslots: Total number of slots in the memory pool.
*
* Limit the number of areas to the maximum possible number of areas in
* a memory pool of the given size.
*
* Return: Maximum possible number of areas.
*/
static unsigned int limit_nareas(unsigned int nareas, unsigned long nslots)
{
if (nslots < nareas * IO_TLB_SEGSIZE)
return nslots / IO_TLB_SEGSIZE;
return nareas;
}
static int __init
setup_io_tlb_npages(char *str)
{
if (isdigit(*str)) {
/* avoid tail segment of size < IO_TLB_SEGSIZE */
default_nslabs =
ALIGN(simple_strtoul(str, &str, 0), IO_TLB_SEGSIZE);
}
if (*str == ',')
++str;
if (isdigit(*str))
swiotlb_adjust_nareas(simple_strtoul(str, &str, 0));
if (*str == ',')
++str;
if (!strcmp(str, "force"))
swiotlb_force_bounce = true;
else if (!strcmp(str, "noforce"))
swiotlb_force_disable = true;
return 0;
}
early_param("swiotlb", setup_io_tlb_npages);
unsigned long swiotlb_size_or_default(void)
{
return default_nslabs << IO_TLB_SHIFT;
}
void __init swiotlb_adjust_size(unsigned long size)
{
/*
* If swiotlb parameter has not been specified, give a chance to
* architectures such as those supporting memory encryption to
* adjust/expand SWIOTLB size for their use.
*/
if (default_nslabs != IO_TLB_DEFAULT_SIZE >> IO_TLB_SHIFT)
return;
size = ALIGN(size, IO_TLB_SIZE);
default_nslabs = ALIGN(size >> IO_TLB_SHIFT, IO_TLB_SEGSIZE);
if (round_up_default_nslabs())
size = default_nslabs << IO_TLB_SHIFT;
pr_info("SWIOTLB bounce buffer size adjusted to %luMB", size >> 20);
}
void swiotlb_print_info(void)
{
struct io_tlb_pool *mem = &io_tlb_default_mem.defpool;
swiotlb: Convert io_default_tlb_mem to static allocation Since commit 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used"), 'struct device' may hold a copy of the global 'io_default_tlb_mem' pointer if the device is using swiotlb for DMA. A subsequent call to swiotlb_exit() will therefore leave dangling pointers behind in these device structures, resulting in KASAN splats such as: | BUG: KASAN: use-after-free in __iommu_dma_unmap_swiotlb+0x64/0xb0 | Read of size 8 at addr ffff8881d7830000 by task swapper/0/0 | | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc3-debug #1 | Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 | Call Trace: | <IRQ> | dump_stack+0x9c/0xcf | print_address_description.constprop.0+0x18/0x130 | kasan_report.cold+0x7f/0x111 | __iommu_dma_unmap_swiotlb+0x64/0xb0 | nvme_pci_complete_rq+0x73/0x130 | blk_complete_reqs+0x6f/0x80 | __do_softirq+0xfc/0x3be Convert 'io_default_tlb_mem' to a static structure, so that the per-device pointers remain valid after swiotlb_exit() has been invoked. All users are updated to reference the static structure directly, using the 'nslabs' field to determine whether swiotlb has been initialised. The 'slots' array is still allocated dynamically and referenced via a pointer rather than a flexible array member. Cc: Claire Chang <tientzu@chromium.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Fixes: 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used") Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Claire Chang <tientzu@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2021-07-20 13:38:24 +00:00
if (!mem->nslabs) {
pr_warn("No low mem\n");
x86: Don't panic if can not alloc buffer for swiotlb Normal boot path on system with iommu support: swiotlb buffer will be allocated early at first and then try to initialize iommu, if iommu for intel or AMD could setup properly, swiotlb buffer will be freed. The early allocating is with bootmem, and could panic when we try to use kdump with buffer above 4G only, or with memmap to limit mem under 4G. for example: memmap=4095M$1M to remove memory under 4G. According to Eric, add _nopanic version and no_iotlb_memory to fail map single later if swiotlb is still needed. -v2: don't pass nopanic, and use -ENOMEM return value according to Eric. panic early instead of using swiotlb_full to panic...according to Eric/Konrad. -v3: make swiotlb_init to be notpanic, but will affect: arm64, ia64, powerpc, tile, unicore32, x86. -v4: cleanup swiotlb_init by removing swiotlb_init_with_default_size. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-36-git-send-email-yinghai@kernel.org Reviewed-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: linux-mips@linux-mips.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:20:16 +00:00
return;
}
pr_info("mapped [mem %pa-%pa] (%luMB)\n", &mem->start, &mem->end,
(mem->nslabs << IO_TLB_SHIFT) >> 20);
}
static inline unsigned long io_tlb_offset(unsigned long val)
{
return val & (IO_TLB_SEGSIZE - 1);
}
static inline unsigned long nr_slots(u64 val)
{
return DIV_ROUND_UP(val, IO_TLB_SIZE);
}
x86, swiotlb: Add memory encryption support Since DMA addresses will effectively look like 48-bit addresses when the memory encryption mask is set, SWIOTLB is needed if the DMA mask of the device performing the DMA does not support 48-bits. SWIOTLB will be initialized to create decrypted bounce buffers for use by these devices. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/aa2d29b78ae7d508db8881e46a3215231b9327a7.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-17 21:10:21 +00:00
/*
* Early SWIOTLB allocation may be too early to allow an architecture to
* perform the desired operations. This function allows the architecture to
* call SWIOTLB when the operations are possible. It needs to be called
* before the SWIOTLB memory is used.
*/
void __init swiotlb_update_mem_attributes(void)
{
struct io_tlb_pool *mem = &io_tlb_default_mem.defpool;
x86, swiotlb: Add memory encryption support Since DMA addresses will effectively look like 48-bit addresses when the memory encryption mask is set, SWIOTLB is needed if the DMA mask of the device performing the DMA does not support 48-bits. SWIOTLB will be initialized to create decrypted bounce buffers for use by these devices. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/aa2d29b78ae7d508db8881e46a3215231b9327a7.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-17 21:10:21 +00:00
unsigned long bytes;
swiotlb: Convert io_default_tlb_mem to static allocation Since commit 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used"), 'struct device' may hold a copy of the global 'io_default_tlb_mem' pointer if the device is using swiotlb for DMA. A subsequent call to swiotlb_exit() will therefore leave dangling pointers behind in these device structures, resulting in KASAN splats such as: | BUG: KASAN: use-after-free in __iommu_dma_unmap_swiotlb+0x64/0xb0 | Read of size 8 at addr ffff8881d7830000 by task swapper/0/0 | | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc3-debug #1 | Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 | Call Trace: | <IRQ> | dump_stack+0x9c/0xcf | print_address_description.constprop.0+0x18/0x130 | kasan_report.cold+0x7f/0x111 | __iommu_dma_unmap_swiotlb+0x64/0xb0 | nvme_pci_complete_rq+0x73/0x130 | blk_complete_reqs+0x6f/0x80 | __do_softirq+0xfc/0x3be Convert 'io_default_tlb_mem' to a static structure, so that the per-device pointers remain valid after swiotlb_exit() has been invoked. All users are updated to reference the static structure directly, using the 'nslabs' field to determine whether swiotlb has been initialised. The 'slots' array is still allocated dynamically and referenced via a pointer rather than a flexible array member. Cc: Claire Chang <tientzu@chromium.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Fixes: 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used") Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Claire Chang <tientzu@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2021-07-20 13:38:24 +00:00
if (!mem->nslabs || mem->late_alloc)
x86, swiotlb: Add memory encryption support Since DMA addresses will effectively look like 48-bit addresses when the memory encryption mask is set, SWIOTLB is needed if the DMA mask of the device performing the DMA does not support 48-bits. SWIOTLB will be initialized to create decrypted bounce buffers for use by these devices. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/aa2d29b78ae7d508db8881e46a3215231b9327a7.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-17 21:10:21 +00:00
return;
bytes = PAGE_ALIGN(mem->nslabs << IO_TLB_SHIFT);
set_memory_decrypted((unsigned long)mem->vaddr, bytes >> PAGE_SHIFT);
x86, swiotlb: Add memory encryption support Since DMA addresses will effectively look like 48-bit addresses when the memory encryption mask is set, SWIOTLB is needed if the DMA mask of the device performing the DMA does not support 48-bits. SWIOTLB will be initialized to create decrypted bounce buffers for use by these devices. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/aa2d29b78ae7d508db8881e46a3215231b9327a7.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-17 21:10:21 +00:00
}
static void swiotlb_init_io_tlb_pool(struct io_tlb_pool *mem, phys_addr_t start,
unsigned long nslabs, bool late_alloc, unsigned int nareas)
{
void *vaddr = phys_to_virt(start);
unsigned long bytes = nslabs << IO_TLB_SHIFT, i;
mem->nslabs = nslabs;
mem->start = start;
mem->end = mem->start + bytes;
mem->late_alloc = late_alloc;
mem->nareas = nareas;
mem->area_nslabs = nslabs / mem->nareas;
for (i = 0; i < mem->nareas; i++) {
spin_lock_init(&mem->areas[i].lock);
mem->areas[i].index = 0;
mem->areas[i].used = 0;
}
for (i = 0; i < mem->nslabs; i++) {
mem->slots[i].list = min(IO_TLB_SEGSIZE - io_tlb_offset(i),
mem->nslabs - i);
mem->slots[i].orig_addr = INVALID_PHYS_ADDR;
mem->slots[i].alloc_size = 0;
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary Allow a buffer pre-padding of up to alloc_align_mask, even if it requires allocating additional IO TLB slots. If the allocation alignment is bigger than IO_TLB_SIZE and min_align_mask covers any non-zero bits in the original address between IO_TLB_SIZE and alloc_align_mask, these bits are not preserved in the swiotlb buffer address. To fix this case, increase the allocation size and use a larger offset within the allocated buffer. As a result, extra padding slots may be allocated before the mapping start address. Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR. These slots do not correspond to any CPU buffer, so attempts to sync the data should be ignored. The padding slots should be automatically released when the buffer is unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the DMA buffer slot, not the first padding slot. Save the number of padding slots in struct io_tlb_slot and use it to adjust the slot index in swiotlb_release_slots(), so all allocated slots are properly freed. Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present") Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/ Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-25 08:31:04 +00:00
mem->slots[i].pad_slots = 0;
}
memset(vaddr, 0, bytes);
mem->vaddr = vaddr;
return;
}
/**
* add_mem_pool() - add a memory pool to the allocator
* @mem: Software IO TLB allocator.
* @pool: Memory pool to be added.
*/
static void add_mem_pool(struct io_tlb_mem *mem, struct io_tlb_pool *pool)
{
#ifdef CONFIG_SWIOTLB_DYNAMIC
spin_lock(&mem->lock);
list_add_rcu(&pool->node, &mem->pools);
mem->nslabs += pool->nslabs;
spin_unlock(&mem->lock);
#else
mem->nslabs = pool->nslabs;
#endif
}
static void __init *swiotlb_memblock_alloc(unsigned long nslabs,
unsigned int flags,
int (*remap)(void *tlb, unsigned long nslabs))
{
size_t bytes = PAGE_ALIGN(nslabs << IO_TLB_SHIFT);
void *tlb;
/*
* By default allocate the bounce buffer memory from low memory, but
* allow to pick a location everywhere for hypervisors with guest
* memory encryption.
*/
if (flags & SWIOTLB_ANY)
tlb = memblock_alloc(bytes, PAGE_SIZE);
else
tlb = memblock_alloc_low(bytes, PAGE_SIZE);
if (!tlb) {
pr_warn("%s: Failed to allocate %zu bytes tlb structure\n",
__func__, bytes);
return NULL;
}
if (remap && remap(tlb, nslabs) < 0) {
memblock_free(tlb, PAGE_ALIGN(bytes));
pr_warn("%s: Failed to remap %zu bytes\n", __func__, bytes);
return NULL;
}
return tlb;
}
/*
* Statically reserve bounce buffer space and initialize bounce buffer data
* structures for the software IO TLB used to implement the DMA API.
*/
void __init swiotlb_init_remap(bool addressing_limit, unsigned int flags,
int (*remap)(void *tlb, unsigned long nslabs))
{
struct io_tlb_pool *mem = &io_tlb_default_mem.defpool;
unsigned long nslabs;
unsigned int nareas;
size_t alloc_size;
void *tlb;
if (!addressing_limit && !swiotlb_force_bounce)
return;
if (swiotlb_force_disable)
return;
io_tlb_default_mem.force_bounce =
swiotlb_force_bounce || (flags & SWIOTLB_FORCE);
#ifdef CONFIG_SWIOTLB_DYNAMIC
if (!remap)
io_tlb_default_mem.can_grow = true;
if (flags & SWIOTLB_ANY)
io_tlb_default_mem.phys_limit = virt_to_phys(high_memory - 1);
else
io_tlb_default_mem.phys_limit = ARCH_LOW_ADDRESS_LIMIT;
#endif
if (!default_nareas)
swiotlb_adjust_nareas(num_possible_cpus());
nslabs = default_nslabs;
nareas = limit_nareas(default_nareas, nslabs);
while ((tlb = swiotlb_memblock_alloc(nslabs, flags, remap)) == NULL) {
if (nslabs <= IO_TLB_MIN_SLABS)
return;
nslabs = ALIGN(nslabs >> 1, IO_TLB_SEGSIZE);
nareas = limit_nareas(nareas, nslabs);
}
swiotlb: don't panic! The panics in swiotlb are relics of a bygone era, some of them inadvertently inherited from a memblock refactor, and all of them unnecessary since they are in places that may also fail gracefully anyway. Convert the panics in swiotlb_init_remap() into non-fatal warnings more consistent with the other bail-out paths there and in swiotlb_init_late() (but don't bother trying to roll anything back, since if anything does actually fail that early, the aim is merely to keep going as far as possible to get more diagnostic information out of the inevitably-dying kernel). It's not for SWIOTLB to decide that the system is terminally compromised just because there *might* turn out to be one or more 32-bit devices that might want to make streaming DMA mappings, especially since we already handle the no-buffer case later if it turns out someone did want it. Similarly though, downgrade that panic in swiotlb_tbl_map_single(), since even if we do get to that point it's an overly extreme reaction. It makes little difference to the DMA API caller whether a mapping fails because the buffer is full or because there is no buffer, and once again it's not for SWIOTLB to presume that any particular DMA mapping is so fundamental to the operation of the system that it must be terminal if it could never succeed. Even if the caller handles failure by futilely retrying forever, a single stuck thread is considerably less impactful to the user than a needless panic. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-09-07 13:38:33 +00:00
if (default_nslabs != nslabs) {
pr_info("SWIOTLB bounce buffer size adjusted %lu -> %lu slabs",
default_nslabs, nslabs);
default_nslabs = nslabs;
}
alloc_size = PAGE_ALIGN(array_size(sizeof(*mem->slots), nslabs));
mem->slots = memblock_alloc(alloc_size, PAGE_SIZE);
swiotlb: don't panic! The panics in swiotlb are relics of a bygone era, some of them inadvertently inherited from a memblock refactor, and all of them unnecessary since they are in places that may also fail gracefully anyway. Convert the panics in swiotlb_init_remap() into non-fatal warnings more consistent with the other bail-out paths there and in swiotlb_init_late() (but don't bother trying to roll anything back, since if anything does actually fail that early, the aim is merely to keep going as far as possible to get more diagnostic information out of the inevitably-dying kernel). It's not for SWIOTLB to decide that the system is terminally compromised just because there *might* turn out to be one or more 32-bit devices that might want to make streaming DMA mappings, especially since we already handle the no-buffer case later if it turns out someone did want it. Similarly though, downgrade that panic in swiotlb_tbl_map_single(), since even if we do get to that point it's an overly extreme reaction. It makes little difference to the DMA API caller whether a mapping fails because the buffer is full or because there is no buffer, and once again it's not for SWIOTLB to presume that any particular DMA mapping is so fundamental to the operation of the system that it must be terminal if it could never succeed. Even if the caller handles failure by futilely retrying forever, a single stuck thread is considerably less impactful to the user than a needless panic. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-09-07 13:38:33 +00:00
if (!mem->slots) {
pr_warn("%s: Failed to allocate %zu bytes align=0x%lx\n",
__func__, alloc_size, PAGE_SIZE);
return;
}
mem->areas = memblock_alloc(array_size(sizeof(struct io_tlb_area),
nareas), SMP_CACHE_BYTES);
swiotlb: don't panic! The panics in swiotlb are relics of a bygone era, some of them inadvertently inherited from a memblock refactor, and all of them unnecessary since they are in places that may also fail gracefully anyway. Convert the panics in swiotlb_init_remap() into non-fatal warnings more consistent with the other bail-out paths there and in swiotlb_init_late() (but don't bother trying to roll anything back, since if anything does actually fail that early, the aim is merely to keep going as far as possible to get more diagnostic information out of the inevitably-dying kernel). It's not for SWIOTLB to decide that the system is terminally compromised just because there *might* turn out to be one or more 32-bit devices that might want to make streaming DMA mappings, especially since we already handle the no-buffer case later if it turns out someone did want it. Similarly though, downgrade that panic in swiotlb_tbl_map_single(), since even if we do get to that point it's an overly extreme reaction. It makes little difference to the DMA API caller whether a mapping fails because the buffer is full or because there is no buffer, and once again it's not for SWIOTLB to presume that any particular DMA mapping is so fundamental to the operation of the system that it must be terminal if it could never succeed. Even if the caller handles failure by futilely retrying forever, a single stuck thread is considerably less impactful to the user than a needless panic. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-09-07 13:38:33 +00:00
if (!mem->areas) {
pr_warn("%s: Failed to allocate mem->areas.\n", __func__);
return;
}
swiotlb_init_io_tlb_pool(mem, __pa(tlb), nslabs, false, nareas);
add_mem_pool(&io_tlb_default_mem, mem);
if (flags & SWIOTLB_VERBOSE)
swiotlb_print_info();
}
void __init swiotlb_init(bool addressing_limit, unsigned int flags)
{
swiotlb_init_remap(addressing_limit, flags, NULL);
}
/*
* Systems with larger DMA zones (those that don't support ISA) can
* initialize the swiotlb later using the slab allocator if needed.
* This should be just like above, but with some error catching.
*/
int swiotlb_init_late(size_t size, gfp_t gfp_mask,
int (*remap)(void *tlb, unsigned long nslabs))
{
struct io_tlb_pool *mem = &io_tlb_default_mem.defpool;
unsigned long nslabs = ALIGN(size >> IO_TLB_SHIFT, IO_TLB_SEGSIZE);
unsigned int nareas;
unsigned char *vstart = NULL;
unsigned int order, area_order;
bool retried = false;
int rc = 0;
if (io_tlb_default_mem.nslabs)
return 0;
if (swiotlb_force_disable)
return 0;
io_tlb_default_mem.force_bounce = swiotlb_force_bounce;
#ifdef CONFIG_SWIOTLB_DYNAMIC
if (!remap)
io_tlb_default_mem.can_grow = true;
if (IS_ENABLED(CONFIG_ZONE_DMA) && (gfp_mask & __GFP_DMA))
io_tlb_default_mem.phys_limit = zone_dma_limit;
else if (IS_ENABLED(CONFIG_ZONE_DMA32) && (gfp_mask & __GFP_DMA32))
io_tlb_default_mem.phys_limit = max(DMA_BIT_MASK(32), zone_dma_limit);
else
io_tlb_default_mem.phys_limit = virt_to_phys(high_memory - 1);
#endif
if (!default_nareas)
swiotlb_adjust_nareas(num_possible_cpus());
retry:
order = get_order(nslabs << IO_TLB_SHIFT);
nslabs = SLABS_PER_PAGE << order;
while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
vstart = (void *)__get_free_pages(gfp_mask | __GFP_NOWARN,
order);
if (vstart)
break;
order--;
nslabs = SLABS_PER_PAGE << order;
retried = true;
}
if (!vstart)
return -ENOMEM;
if (remap)
rc = remap(vstart, nslabs);
if (rc) {
free_pages((unsigned long)vstart, order);
nslabs = ALIGN(nslabs >> 1, IO_TLB_SEGSIZE);
if (nslabs < IO_TLB_MIN_SLABS)
return rc;
retried = true;
goto retry;
}
if (retried) {
pr_warn("only able to allocate %ld MB\n",
(PAGE_SIZE << order) >> 20);
}
nareas = limit_nareas(default_nareas, nslabs);
area_order = get_order(array_size(sizeof(*mem->areas), nareas));
mem->areas = (struct io_tlb_area *)
__get_free_pages(GFP_KERNEL | __GFP_ZERO, area_order);
if (!mem->areas)
goto error_area;
swiotlb: Convert io_default_tlb_mem to static allocation Since commit 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used"), 'struct device' may hold a copy of the global 'io_default_tlb_mem' pointer if the device is using swiotlb for DMA. A subsequent call to swiotlb_exit() will therefore leave dangling pointers behind in these device structures, resulting in KASAN splats such as: | BUG: KASAN: use-after-free in __iommu_dma_unmap_swiotlb+0x64/0xb0 | Read of size 8 at addr ffff8881d7830000 by task swapper/0/0 | | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc3-debug #1 | Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 | Call Trace: | <IRQ> | dump_stack+0x9c/0xcf | print_address_description.constprop.0+0x18/0x130 | kasan_report.cold+0x7f/0x111 | __iommu_dma_unmap_swiotlb+0x64/0xb0 | nvme_pci_complete_rq+0x73/0x130 | blk_complete_reqs+0x6f/0x80 | __do_softirq+0xfc/0x3be Convert 'io_default_tlb_mem' to a static structure, so that the per-device pointers remain valid after swiotlb_exit() has been invoked. All users are updated to reference the static structure directly, using the 'nslabs' field to determine whether swiotlb has been initialised. The 'slots' array is still allocated dynamically and referenced via a pointer rather than a flexible array member. Cc: Claire Chang <tientzu@chromium.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Fixes: 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used") Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Claire Chang <tientzu@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2021-07-20 13:38:24 +00:00
mem->slots = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
get_order(array_size(sizeof(*mem->slots), nslabs)));
if (!mem->slots)
goto error_slots;
set_memory_decrypted((unsigned long)vstart,
(nslabs << IO_TLB_SHIFT) >> PAGE_SHIFT);
swiotlb_init_io_tlb_pool(mem, virt_to_phys(vstart), nslabs, true,
nareas);
add_mem_pool(&io_tlb_default_mem, mem);
swiotlb_print_info();
return 0;
error_slots:
free_pages((unsigned long)mem->areas, area_order);
error_area:
free_pages((unsigned long)vstart, order);
return -ENOMEM;
}
void __init swiotlb_exit(void)
{
struct io_tlb_pool *mem = &io_tlb_default_mem.defpool;
unsigned long tbl_vaddr;
size_t tbl_size, slots_size;
unsigned int area_order;
if (swiotlb_force_bounce)
return;
swiotlb: Convert io_default_tlb_mem to static allocation Since commit 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used"), 'struct device' may hold a copy of the global 'io_default_tlb_mem' pointer if the device is using swiotlb for DMA. A subsequent call to swiotlb_exit() will therefore leave dangling pointers behind in these device structures, resulting in KASAN splats such as: | BUG: KASAN: use-after-free in __iommu_dma_unmap_swiotlb+0x64/0xb0 | Read of size 8 at addr ffff8881d7830000 by task swapper/0/0 | | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc3-debug #1 | Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 | Call Trace: | <IRQ> | dump_stack+0x9c/0xcf | print_address_description.constprop.0+0x18/0x130 | kasan_report.cold+0x7f/0x111 | __iommu_dma_unmap_swiotlb+0x64/0xb0 | nvme_pci_complete_rq+0x73/0x130 | blk_complete_reqs+0x6f/0x80 | __do_softirq+0xfc/0x3be Convert 'io_default_tlb_mem' to a static structure, so that the per-device pointers remain valid after swiotlb_exit() has been invoked. All users are updated to reference the static structure directly, using the 'nslabs' field to determine whether swiotlb has been initialised. The 'slots' array is still allocated dynamically and referenced via a pointer rather than a flexible array member. Cc: Claire Chang <tientzu@chromium.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Fixes: 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used") Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Claire Chang <tientzu@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2021-07-20 13:38:24 +00:00
if (!mem->nslabs)
return;
pr_info("tearing down default memory pool\n");
tbl_vaddr = (unsigned long)phys_to_virt(mem->start);
tbl_size = PAGE_ALIGN(mem->end - mem->start);
slots_size = PAGE_ALIGN(array_size(sizeof(*mem->slots), mem->nslabs));
set_memory_encrypted(tbl_vaddr, tbl_size >> PAGE_SHIFT);
if (mem->late_alloc) {
area_order = get_order(array_size(sizeof(*mem->areas),
mem->nareas));
free_pages((unsigned long)mem->areas, area_order);
free_pages(tbl_vaddr, get_order(tbl_size));
free_pages((unsigned long)mem->slots, get_order(slots_size));
} else {
memblock_free_late(__pa(mem->areas),
array_size(sizeof(*mem->areas), mem->nareas));
memblock_free_late(mem->start, tbl_size);
memblock_free_late(__pa(mem->slots), slots_size);
}
swiotlb: Convert io_default_tlb_mem to static allocation Since commit 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used"), 'struct device' may hold a copy of the global 'io_default_tlb_mem' pointer if the device is using swiotlb for DMA. A subsequent call to swiotlb_exit() will therefore leave dangling pointers behind in these device structures, resulting in KASAN splats such as: | BUG: KASAN: use-after-free in __iommu_dma_unmap_swiotlb+0x64/0xb0 | Read of size 8 at addr ffff8881d7830000 by task swapper/0/0 | | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc3-debug #1 | Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 | Call Trace: | <IRQ> | dump_stack+0x9c/0xcf | print_address_description.constprop.0+0x18/0x130 | kasan_report.cold+0x7f/0x111 | __iommu_dma_unmap_swiotlb+0x64/0xb0 | nvme_pci_complete_rq+0x73/0x130 | blk_complete_reqs+0x6f/0x80 | __do_softirq+0xfc/0x3be Convert 'io_default_tlb_mem' to a static structure, so that the per-device pointers remain valid after swiotlb_exit() has been invoked. All users are updated to reference the static structure directly, using the 'nslabs' field to determine whether swiotlb has been initialised. The 'slots' array is still allocated dynamically and referenced via a pointer rather than a flexible array member. Cc: Claire Chang <tientzu@chromium.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Fixes: 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used") Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Claire Chang <tientzu@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2021-07-20 13:38:24 +00:00
memset(mem, 0, sizeof(*mem));
}
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
#ifdef CONFIG_SWIOTLB_DYNAMIC
/**
* alloc_dma_pages() - allocate pages to be used for DMA
* @gfp: GFP flags for the allocation.
* @bytes: Size of the buffer.
* @phys_limit: Maximum allowed physical address of the buffer.
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
*
* Allocate pages from the buddy allocator. If successful, make the allocated
* pages decrypted that they can be used for DMA.
*
* Return: Decrypted pages, %NULL on allocation failure, or ERR_PTR(-EAGAIN)
* if the allocated physical address was above @phys_limit.
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
*/
static struct page *alloc_dma_pages(gfp_t gfp, size_t bytes, u64 phys_limit)
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
{
unsigned int order = get_order(bytes);
struct page *page;
phys_addr_t paddr;
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
void *vaddr;
page = alloc_pages(gfp, order);
if (!page)
return NULL;
paddr = page_to_phys(page);
if (paddr + bytes - 1 > phys_limit) {
__free_pages(page, order);
return ERR_PTR(-EAGAIN);
}
vaddr = phys_to_virt(paddr);
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
if (set_memory_decrypted((unsigned long)vaddr, PFN_UP(bytes)))
goto error;
return page;
error:
/* Intentional leak if pages cannot be encrypted again. */
if (!set_memory_encrypted((unsigned long)vaddr, PFN_UP(bytes)))
__free_pages(page, order);
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
return NULL;
}
/**
* swiotlb_alloc_tlb() - allocate a dynamic IO TLB buffer
* @dev: Device for which a memory pool is allocated.
* @bytes: Size of the buffer.
* @phys_limit: Maximum allowed physical address of the buffer.
* @gfp: GFP flags for the allocation.
*
* Return: Allocated pages, or %NULL on allocation failure.
*/
static struct page *swiotlb_alloc_tlb(struct device *dev, size_t bytes,
u64 phys_limit, gfp_t gfp)
{
struct page *page;
/*
* Allocate from the atomic pools if memory is encrypted and
* the allocation is atomic, because decrypting may block.
*/
if (!gfpflags_allow_blocking(gfp) && dev && force_dma_unencrypted(dev)) {
void *vaddr;
if (!IS_ENABLED(CONFIG_DMA_COHERENT_POOL))
return NULL;
return dma_alloc_from_pool(dev, bytes, &vaddr, gfp,
dma_coherent_ok);
}
gfp &= ~GFP_ZONEMASK;
if (phys_limit <= zone_dma_limit)
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
gfp |= __GFP_DMA;
else if (phys_limit <= DMA_BIT_MASK(32))
gfp |= __GFP_DMA32;
while (IS_ERR(page = alloc_dma_pages(gfp, bytes, phys_limit))) {
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
if (IS_ENABLED(CONFIG_ZONE_DMA32) &&
phys_limit < DMA_BIT_MASK(64) &&
!(gfp & (__GFP_DMA32 | __GFP_DMA)))
gfp |= __GFP_DMA32;
else if (IS_ENABLED(CONFIG_ZONE_DMA) &&
!(gfp & __GFP_DMA))
gfp = (gfp & ~__GFP_DMA32) | __GFP_DMA;
else
return NULL;
}
return page;
}
/**
* swiotlb_free_tlb() - free a dynamically allocated IO TLB buffer
* @vaddr: Virtual address of the buffer.
* @bytes: Size of the buffer.
*/
static void swiotlb_free_tlb(void *vaddr, size_t bytes)
{
if (IS_ENABLED(CONFIG_DMA_COHERENT_POOL) &&
dma_free_from_pool(NULL, vaddr, bytes))
return;
/* Intentional leak if pages cannot be encrypted again. */
if (!set_memory_encrypted((unsigned long)vaddr, PFN_UP(bytes)))
__free_pages(virt_to_page(vaddr), get_order(bytes));
}
/**
* swiotlb_alloc_pool() - allocate a new IO TLB memory pool
* @dev: Device for which a memory pool is allocated.
* @minslabs: Minimum number of slabs.
* @nslabs: Desired (maximum) number of slabs.
* @nareas: Number of areas.
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
* @phys_limit: Maximum DMA buffer physical address.
* @gfp: GFP flags for the allocations.
*
* Allocate and initialize a new IO TLB memory pool. The actual number of
* slabs may be reduced if allocation of @nslabs fails. If even
* @minslabs cannot be allocated, this function fails.
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
*
* Return: New memory pool, or %NULL on allocation failure.
*/
static struct io_tlb_pool *swiotlb_alloc_pool(struct device *dev,
unsigned long minslabs, unsigned long nslabs,
unsigned int nareas, u64 phys_limit, gfp_t gfp)
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
{
struct io_tlb_pool *pool;
unsigned int slot_order;
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
struct page *tlb;
size_t pool_size;
size_t tlb_size;
if (nslabs > SLABS_PER_PAGE << MAX_PAGE_ORDER) {
nslabs = SLABS_PER_PAGE << MAX_PAGE_ORDER;
nareas = limit_nareas(nareas, nslabs);
}
pool_size = sizeof(*pool) + array_size(sizeof(*pool->areas), nareas);
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
pool = kzalloc(pool_size, gfp);
if (!pool)
goto error;
pool->areas = (void *)pool + sizeof(*pool);
tlb_size = nslabs << IO_TLB_SHIFT;
while (!(tlb = swiotlb_alloc_tlb(dev, tlb_size, phys_limit, gfp))) {
if (nslabs <= minslabs)
goto error_tlb;
nslabs = ALIGN(nslabs >> 1, IO_TLB_SEGSIZE);
nareas = limit_nareas(nareas, nslabs);
tlb_size = nslabs << IO_TLB_SHIFT;
}
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
slot_order = get_order(array_size(sizeof(*pool->slots), nslabs));
pool->slots = (struct io_tlb_slot *)
__get_free_pages(gfp, slot_order);
if (!pool->slots)
goto error_slots;
swiotlb_init_io_tlb_pool(pool, page_to_phys(tlb), nslabs, true, nareas);
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
return pool;
error_slots:
swiotlb_free_tlb(page_address(tlb), tlb_size);
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
error_tlb:
kfree(pool);
error:
return NULL;
}
/**
* swiotlb_dyn_alloc() - dynamic memory pool allocation worker
* @work: Pointer to dyn_alloc in struct io_tlb_mem.
*/
static void swiotlb_dyn_alloc(struct work_struct *work)
{
struct io_tlb_mem *mem =
container_of(work, struct io_tlb_mem, dyn_alloc);
struct io_tlb_pool *pool;
pool = swiotlb_alloc_pool(NULL, IO_TLB_MIN_SLABS, default_nslabs,
default_nareas, mem->phys_limit, GFP_KERNEL);
if (!pool) {
pr_warn_ratelimited("Failed to allocate new pool");
return;
}
add_mem_pool(mem, pool);
}
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
/**
* swiotlb_dyn_free() - RCU callback to free a memory pool
* @rcu: RCU head in the corresponding struct io_tlb_pool.
*/
static void swiotlb_dyn_free(struct rcu_head *rcu)
{
struct io_tlb_pool *pool = container_of(rcu, struct io_tlb_pool, rcu);
size_t slots_size = array_size(sizeof(*pool->slots), pool->nslabs);
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
size_t tlb_size = pool->end - pool->start;
free_pages((unsigned long)pool->slots, get_order(slots_size));
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
swiotlb_free_tlb(pool->vaddr, tlb_size);
kfree(pool);
}
/**
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
* __swiotlb_find_pool() - find the IO TLB pool for a physical address
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
* @dev: Device which has mapped the DMA buffer.
* @paddr: Physical address within the DMA buffer.
*
* Find the IO TLB memory pool descriptor which contains the given physical
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
* address, if any. This function is for use only when the dev is known to
* be using swiotlb. Use swiotlb_find_pool() for the more general case
* when this condition is not met.
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
*
* Return: Memory pool which contains @paddr, or %NULL if none.
*/
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
struct io_tlb_pool *__swiotlb_find_pool(struct device *dev, phys_addr_t paddr)
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
{
struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
struct io_tlb_pool *pool;
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
rcu_read_lock();
list_for_each_entry_rcu(pool, &mem->pools, node) {
if (paddr >= pool->start && paddr < pool->end)
goto out;
}
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
list_for_each_entry_rcu(pool, &dev->dma_io_tlb_pools, node) {
if (paddr >= pool->start && paddr < pool->end)
goto out;
}
pool = NULL;
out:
rcu_read_unlock();
return pool;
}
/**
* swiotlb_del_pool() - remove an IO TLB pool from a device
* @dev: Owning device.
* @pool: Memory pool to be removed.
*/
static void swiotlb_del_pool(struct device *dev, struct io_tlb_pool *pool)
{
unsigned long flags;
spin_lock_irqsave(&dev->dma_io_tlb_lock, flags);
list_del_rcu(&pool->node);
spin_unlock_irqrestore(&dev->dma_io_tlb_lock, flags);
call_rcu(&pool->rcu, swiotlb_dyn_free);
}
#endif /* CONFIG_SWIOTLB_DYNAMIC */
/**
* swiotlb_dev_init() - initialize swiotlb fields in &struct device
* @dev: Device to be initialized.
*/
void swiotlb_dev_init(struct device *dev)
{
dev->dma_io_tlb_mem = &io_tlb_default_mem;
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
#ifdef CONFIG_SWIOTLB_DYNAMIC
INIT_LIST_HEAD(&dev->dma_io_tlb_pools);
spin_lock_init(&dev->dma_io_tlb_lock);
dev->dma_uses_io_tlb = false;
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
#endif
}
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary Allow a buffer pre-padding of up to alloc_align_mask, even if it requires allocating additional IO TLB slots. If the allocation alignment is bigger than IO_TLB_SIZE and min_align_mask covers any non-zero bits in the original address between IO_TLB_SIZE and alloc_align_mask, these bits are not preserved in the swiotlb buffer address. To fix this case, increase the allocation size and use a larger offset within the allocated buffer. As a result, extra padding slots may be allocated before the mapping start address. Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR. These slots do not correspond to any CPU buffer, so attempts to sync the data should be ignored. The padding slots should be automatically released when the buffer is unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the DMA buffer slot, not the first padding slot. Save the number of padding slots in struct io_tlb_slot and use it to adjust the slot index in swiotlb_release_slots(), so all allocated slots are properly freed. Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present") Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/ Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-25 08:31:04 +00:00
/**
* swiotlb_align_offset() - Get required offset into an IO TLB allocation.
* @dev: Owning device.
* @align_mask: Allocation alignment mask.
* @addr: DMA address.
*
* Return the minimum offset from the start of an IO TLB allocation which is
* required for a given buffer address and allocation alignment to keep the
* device happy.
*
* First, the address bits covered by min_align_mask must be identical in the
* original address and the bounce buffer address. High bits are preserved by
* choosing a suitable IO TLB slot, but bits below IO_TLB_SHIFT require extra
* padding bytes before the bounce buffer.
*
* Second, @align_mask specifies which bits of the first allocated slot must
* be zero. This may require allocating additional padding slots, and then the
* offset (in bytes) from the first such padding slot is returned.
swiotlb: manipulate orig_addr when tlb_addr has offset in case of driver wants to sync part of ranges with offset, swiotlb_tbl_sync_single() copies from orig_addr base to tlb_addr with offset and ends up with data mismatch. It was removed from "swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single", but said logic has to be added back in. From Linus's email: "That commit which the removed the offset calculation entirely, because the old (unsigned long)tlb_addr & (IO_TLB_SIZE - 1) was wrong, but instead of removing it, I think it should have just fixed it to be (tlb_addr - mem->start) & (IO_TLB_SIZE - 1); instead. That way the slot offset always matches the slot index calculation." (Unfortunatly that broke NVMe). The use-case that drivers are hitting is as follow: 1. Get dma_addr_t from dma_map_single() dma_addr_t tlb_addr = dma_map_single(dev, vaddr, vsize, DMA_TO_DEVICE); |<---------------vsize------------->| +-----------------------------------+ | | original buffer +-----------------------------------+ vaddr swiotlb_align_offset |<----->|<---------------vsize------------->| +-------+-----------------------------------+ | | | swiotlb buffer +-------+-----------------------------------+ tlb_addr 2. Do something 3. Sync dma_addr_t through dma_sync_single_for_device(..) dma_sync_single_for_device(dev, tlb_addr + offset, size, DMA_TO_DEVICE); Error case. Copy data to original buffer but it is from base addr (instead of base addr + offset) in original buffer: swiotlb_align_offset |<----->|<- offset ->|<- size ->| +-------+-----------------------------------+ | | |##########| | swiotlb buffer +-------+-----------------------------------+ tlb_addr |<- size ->| +-----------------------------------+ |##########| | original buffer +-----------------------------------+ vaddr The fix is to copy the data to the original buffer and take into account the offset, like so: swiotlb_align_offset |<----->|<- offset ->|<- size ->| +-------+-----------------------------------+ | | |##########| | swiotlb buffer +-------+-----------------------------------+ tlb_addr |<- offset ->|<- size ->| +-----------------------------------+ | |##########| | original buffer +-----------------------------------+ vaddr [One fix which was Linus's that made more sense to as it created a symmetry would break NVMe. The reason for that is the: unsigned int offset = (tlb_addr - mem->start) & (IO_TLB_SIZE - 1); would come up with the proper offset, but it would lose the alignment (which this patch contains).] Fixes: 16fc3cef33a0 ("swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single") Signed-off-by: Bumyong Lee <bumyong.lee@samsung.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reported-by: Dominique MARTINET <dominique.martinet@atmark-techno.com> Reported-by: Horia Geantă <horia.geanta@nxp.com> Tested-by: Horia Geantă <horia.geanta@nxp.com> CC: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2021-05-10 09:10:04 +00:00
*/
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary Allow a buffer pre-padding of up to alloc_align_mask, even if it requires allocating additional IO TLB slots. If the allocation alignment is bigger than IO_TLB_SIZE and min_align_mask covers any non-zero bits in the original address between IO_TLB_SIZE and alloc_align_mask, these bits are not preserved in the swiotlb buffer address. To fix this case, increase the allocation size and use a larger offset within the allocated buffer. As a result, extra padding slots may be allocated before the mapping start address. Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR. These slots do not correspond to any CPU buffer, so attempts to sync the data should be ignored. The padding slots should be automatically released when the buffer is unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the DMA buffer slot, not the first padding slot. Save the number of padding slots in struct io_tlb_slot and use it to adjust the slot index in swiotlb_release_slots(), so all allocated slots are properly freed. Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present") Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/ Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-25 08:31:04 +00:00
static unsigned int swiotlb_align_offset(struct device *dev,
unsigned int align_mask, u64 addr)
swiotlb: manipulate orig_addr when tlb_addr has offset in case of driver wants to sync part of ranges with offset, swiotlb_tbl_sync_single() copies from orig_addr base to tlb_addr with offset and ends up with data mismatch. It was removed from "swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single", but said logic has to be added back in. From Linus's email: "That commit which the removed the offset calculation entirely, because the old (unsigned long)tlb_addr & (IO_TLB_SIZE - 1) was wrong, but instead of removing it, I think it should have just fixed it to be (tlb_addr - mem->start) & (IO_TLB_SIZE - 1); instead. That way the slot offset always matches the slot index calculation." (Unfortunatly that broke NVMe). The use-case that drivers are hitting is as follow: 1. Get dma_addr_t from dma_map_single() dma_addr_t tlb_addr = dma_map_single(dev, vaddr, vsize, DMA_TO_DEVICE); |<---------------vsize------------->| +-----------------------------------+ | | original buffer +-----------------------------------+ vaddr swiotlb_align_offset |<----->|<---------------vsize------------->| +-------+-----------------------------------+ | | | swiotlb buffer +-------+-----------------------------------+ tlb_addr 2. Do something 3. Sync dma_addr_t through dma_sync_single_for_device(..) dma_sync_single_for_device(dev, tlb_addr + offset, size, DMA_TO_DEVICE); Error case. Copy data to original buffer but it is from base addr (instead of base addr + offset) in original buffer: swiotlb_align_offset |<----->|<- offset ->|<- size ->| +-------+-----------------------------------+ | | |##########| | swiotlb buffer +-------+-----------------------------------+ tlb_addr |<- size ->| +-----------------------------------+ |##########| | original buffer +-----------------------------------+ vaddr The fix is to copy the data to the original buffer and take into account the offset, like so: swiotlb_align_offset |<----->|<- offset ->|<- size ->| +-------+-----------------------------------+ | | |##########| | swiotlb buffer +-------+-----------------------------------+ tlb_addr |<- offset ->|<- size ->| +-----------------------------------+ | |##########| | original buffer +-----------------------------------+ vaddr [One fix which was Linus's that made more sense to as it created a symmetry would break NVMe. The reason for that is the: unsigned int offset = (tlb_addr - mem->start) & (IO_TLB_SIZE - 1); would come up with the proper offset, but it would lose the alignment (which this patch contains).] Fixes: 16fc3cef33a0 ("swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single") Signed-off-by: Bumyong Lee <bumyong.lee@samsung.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reported-by: Dominique MARTINET <dominique.martinet@atmark-techno.com> Reported-by: Horia Geantă <horia.geanta@nxp.com> Tested-by: Horia Geantă <horia.geanta@nxp.com> CC: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2021-05-10 09:10:04 +00:00
{
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary Allow a buffer pre-padding of up to alloc_align_mask, even if it requires allocating additional IO TLB slots. If the allocation alignment is bigger than IO_TLB_SIZE and min_align_mask covers any non-zero bits in the original address between IO_TLB_SIZE and alloc_align_mask, these bits are not preserved in the swiotlb buffer address. To fix this case, increase the allocation size and use a larger offset within the allocated buffer. As a result, extra padding slots may be allocated before the mapping start address. Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR. These slots do not correspond to any CPU buffer, so attempts to sync the data should be ignored. The padding slots should be automatically released when the buffer is unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the DMA buffer slot, not the first padding slot. Save the number of padding slots in struct io_tlb_slot and use it to adjust the slot index in swiotlb_release_slots(), so all allocated slots are properly freed. Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present") Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/ Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-25 08:31:04 +00:00
return addr & dma_get_min_align_mask(dev) &
(align_mask | (IO_TLB_SIZE - 1));
swiotlb: manipulate orig_addr when tlb_addr has offset in case of driver wants to sync part of ranges with offset, swiotlb_tbl_sync_single() copies from orig_addr base to tlb_addr with offset and ends up with data mismatch. It was removed from "swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single", but said logic has to be added back in. From Linus's email: "That commit which the removed the offset calculation entirely, because the old (unsigned long)tlb_addr & (IO_TLB_SIZE - 1) was wrong, but instead of removing it, I think it should have just fixed it to be (tlb_addr - mem->start) & (IO_TLB_SIZE - 1); instead. That way the slot offset always matches the slot index calculation." (Unfortunatly that broke NVMe). The use-case that drivers are hitting is as follow: 1. Get dma_addr_t from dma_map_single() dma_addr_t tlb_addr = dma_map_single(dev, vaddr, vsize, DMA_TO_DEVICE); |<---------------vsize------------->| +-----------------------------------+ | | original buffer +-----------------------------------+ vaddr swiotlb_align_offset |<----->|<---------------vsize------------->| +-------+-----------------------------------+ | | | swiotlb buffer +-------+-----------------------------------+ tlb_addr 2. Do something 3. Sync dma_addr_t through dma_sync_single_for_device(..) dma_sync_single_for_device(dev, tlb_addr + offset, size, DMA_TO_DEVICE); Error case. Copy data to original buffer but it is from base addr (instead of base addr + offset) in original buffer: swiotlb_align_offset |<----->|<- offset ->|<- size ->| +-------+-----------------------------------+ | | |##########| | swiotlb buffer +-------+-----------------------------------+ tlb_addr |<- size ->| +-----------------------------------+ |##########| | original buffer +-----------------------------------+ vaddr The fix is to copy the data to the original buffer and take into account the offset, like so: swiotlb_align_offset |<----->|<- offset ->|<- size ->| +-------+-----------------------------------+ | | |##########| | swiotlb buffer +-------+-----------------------------------+ tlb_addr |<- offset ->|<- size ->| +-----------------------------------+ | |##########| | original buffer +-----------------------------------+ vaddr [One fix which was Linus's that made more sense to as it created a symmetry would break NVMe. The reason for that is the: unsigned int offset = (tlb_addr - mem->start) & (IO_TLB_SIZE - 1); would come up with the proper offset, but it would lose the alignment (which this patch contains).] Fixes: 16fc3cef33a0 ("swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single") Signed-off-by: Bumyong Lee <bumyong.lee@samsung.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reported-by: Dominique MARTINET <dominique.martinet@atmark-techno.com> Reported-by: Horia Geantă <horia.geanta@nxp.com> Tested-by: Horia Geantă <horia.geanta@nxp.com> CC: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2021-05-10 09:10:04 +00:00
}
/*
* Bounce: copy the swiotlb buffer from or back to the original dma location
*/
static void swiotlb_bounce(struct device *dev, phys_addr_t tlb_addr, size_t size,
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
enum dma_data_direction dir, struct io_tlb_pool *mem)
{
int index = (tlb_addr - mem->start) >> IO_TLB_SHIFT;
phys_addr_t orig_addr = mem->slots[index].orig_addr;
size_t alloc_size = mem->slots[index].alloc_size;
unsigned long pfn = PFN_DOWN(orig_addr);
unsigned char *vaddr = mem->vaddr + tlb_addr - mem->start;
swiotlb: fix swiotlb_bounce() to do partial sync's correctly In current code, swiotlb_bounce() may do partial sync's correctly in some circumstances, but may incorrectly fail in other circumstances. The failure cases require both of these to be true: 1) swiotlb_align_offset() returns a non-zero "offset" value 2) the tlb_addr of the partial sync area points into the first "offset" bytes of the _second_ or subsequent swiotlb slot allocated for the mapping Code added in commit 868c9ddc182b ("swiotlb: add overflow checks to swiotlb_bounce") attempts to WARN on the invalid case where tlb_addr points into the first "offset" bytes of the _first_ allocated slot. But there's no way for swiotlb_bounce() to distinguish the first slot from the second and subsequent slots, so the WARN can be triggered incorrectly when #2 above is true. Related, current code calculates an adjustment to the orig_addr stored in the swiotlb slot. The adjustment compensates for the difference in the tlb_addr used for the partial sync vs. the tlb_addr for the full mapping. The adjustment is stored in the local variable tlb_offset. But when #1 and #2 above are true, it's valid for this adjustment to be negative. In such case the arithmetic to adjust orig_addr produces the wrong result due to tlb_offset being declared as unsigned. Fix these problems by removing the over-constraining validations added in 868c9ddc182b. Change the declaration of tlb_offset to be signed instead of unsigned so the adjustment arithmetic works correctly. Tested with a test-only hack to how swiotlb_tbl_map_single() calls swiotlb_bounce(). Instead of calling swiotlb_bounce() just once for the entire mapped area, do a loop with each iteration doing only a 128 byte partial sync until the entire mapped area is sync'ed. Then with swiotlb=force on the kernel boot line, run a variety of raw disk writes followed by read and verification of all bytes of the written data. The storage device has DMA min_align_mask set, and the writes are done with a variety of original buffer memory address alignments and overall buffer sizes. For many of the combinations, current code triggers the WARN statements, or the data verification fails. With the fixes, no WARNs occur and all verifications pass. Fixes: 5f89468e2f06 ("swiotlb: manipulate orig_addr when tlb_addr has offset") Fixes: 868c9ddc182b ("swiotlb: add overflow checks to swiotlb_bounce") Signed-off-by: Michael Kelley <mhklinux@outlook.com> Dominique Martinet <dominique.martinet@atmark-techno.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-27 03:45:48 +00:00
int tlb_offset;
if (orig_addr == INVALID_PHYS_ADDR)
return;
swiotlb: fix swiotlb_bounce() to do partial sync's correctly In current code, swiotlb_bounce() may do partial sync's correctly in some circumstances, but may incorrectly fail in other circumstances. The failure cases require both of these to be true: 1) swiotlb_align_offset() returns a non-zero "offset" value 2) the tlb_addr of the partial sync area points into the first "offset" bytes of the _second_ or subsequent swiotlb slot allocated for the mapping Code added in commit 868c9ddc182b ("swiotlb: add overflow checks to swiotlb_bounce") attempts to WARN on the invalid case where tlb_addr points into the first "offset" bytes of the _first_ allocated slot. But there's no way for swiotlb_bounce() to distinguish the first slot from the second and subsequent slots, so the WARN can be triggered incorrectly when #2 above is true. Related, current code calculates an adjustment to the orig_addr stored in the swiotlb slot. The adjustment compensates for the difference in the tlb_addr used for the partial sync vs. the tlb_addr for the full mapping. The adjustment is stored in the local variable tlb_offset. But when #1 and #2 above are true, it's valid for this adjustment to be negative. In such case the arithmetic to adjust orig_addr produces the wrong result due to tlb_offset being declared as unsigned. Fix these problems by removing the over-constraining validations added in 868c9ddc182b. Change the declaration of tlb_offset to be signed instead of unsigned so the adjustment arithmetic works correctly. Tested with a test-only hack to how swiotlb_tbl_map_single() calls swiotlb_bounce(). Instead of calling swiotlb_bounce() just once for the entire mapped area, do a loop with each iteration doing only a 128 byte partial sync until the entire mapped area is sync'ed. Then with swiotlb=force on the kernel boot line, run a variety of raw disk writes followed by read and verification of all bytes of the written data. The storage device has DMA min_align_mask set, and the writes are done with a variety of original buffer memory address alignments and overall buffer sizes. For many of the combinations, current code triggers the WARN statements, or the data verification fails. With the fixes, no WARNs occur and all verifications pass. Fixes: 5f89468e2f06 ("swiotlb: manipulate orig_addr when tlb_addr has offset") Fixes: 868c9ddc182b ("swiotlb: add overflow checks to swiotlb_bounce") Signed-off-by: Michael Kelley <mhklinux@outlook.com> Dominique Martinet <dominique.martinet@atmark-techno.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-27 03:45:48 +00:00
/*
* It's valid for tlb_offset to be negative. This can happen when the
* "offset" returned by swiotlb_align_offset() is non-zero, and the
* tlb_addr is pointing within the first "offset" bytes of the second
* or subsequent slots of the allocated swiotlb area. While it's not
* valid for tlb_addr to be pointing within the first "offset" bytes
* of the first slot, there's no way to check for such an error since
* this function can't distinguish the first slot from the second and
* subsequent slots.
*/
tlb_offset = (tlb_addr & (IO_TLB_SIZE - 1)) -
swiotlb_align_offset(dev, 0, orig_addr);
swiotlb: manipulate orig_addr when tlb_addr has offset in case of driver wants to sync part of ranges with offset, swiotlb_tbl_sync_single() copies from orig_addr base to tlb_addr with offset and ends up with data mismatch. It was removed from "swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single", but said logic has to be added back in. From Linus's email: "That commit which the removed the offset calculation entirely, because the old (unsigned long)tlb_addr & (IO_TLB_SIZE - 1) was wrong, but instead of removing it, I think it should have just fixed it to be (tlb_addr - mem->start) & (IO_TLB_SIZE - 1); instead. That way the slot offset always matches the slot index calculation." (Unfortunatly that broke NVMe). The use-case that drivers are hitting is as follow: 1. Get dma_addr_t from dma_map_single() dma_addr_t tlb_addr = dma_map_single(dev, vaddr, vsize, DMA_TO_DEVICE); |<---------------vsize------------->| +-----------------------------------+ | | original buffer +-----------------------------------+ vaddr swiotlb_align_offset |<----->|<---------------vsize------------->| +-------+-----------------------------------+ | | | swiotlb buffer +-------+-----------------------------------+ tlb_addr 2. Do something 3. Sync dma_addr_t through dma_sync_single_for_device(..) dma_sync_single_for_device(dev, tlb_addr + offset, size, DMA_TO_DEVICE); Error case. Copy data to original buffer but it is from base addr (instead of base addr + offset) in original buffer: swiotlb_align_offset |<----->|<- offset ->|<- size ->| +-------+-----------------------------------+ | | |##########| | swiotlb buffer +-------+-----------------------------------+ tlb_addr |<- size ->| +-----------------------------------+ |##########| | original buffer +-----------------------------------+ vaddr The fix is to copy the data to the original buffer and take into account the offset, like so: swiotlb_align_offset |<----->|<- offset ->|<- size ->| +-------+-----------------------------------+ | | |##########| | swiotlb buffer +-------+-----------------------------------+ tlb_addr |<- offset ->|<- size ->| +-----------------------------------+ | |##########| | original buffer +-----------------------------------+ vaddr [One fix which was Linus's that made more sense to as it created a symmetry would break NVMe. The reason for that is the: unsigned int offset = (tlb_addr - mem->start) & (IO_TLB_SIZE - 1); would come up with the proper offset, but it would lose the alignment (which this patch contains).] Fixes: 16fc3cef33a0 ("swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single") Signed-off-by: Bumyong Lee <bumyong.lee@samsung.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reported-by: Dominique MARTINET <dominique.martinet@atmark-techno.com> Reported-by: Horia Geantă <horia.geanta@nxp.com> Tested-by: Horia Geantă <horia.geanta@nxp.com> CC: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2021-05-10 09:10:04 +00:00
orig_addr += tlb_offset;
alloc_size -= tlb_offset;
if (size > alloc_size) {
dev_WARN_ONCE(dev, 1,
"Buffer overflow detected. Allocation size: %zu. Mapping size: %zu.\n",
alloc_size, size);
size = alloc_size;
}
if (PageHighMem(pfn_to_page(pfn))) {
unsigned int offset = orig_addr & ~PAGE_MASK;
struct page *page;
unsigned int sz = 0;
unsigned long flags;
while (size) {
sz = min_t(size_t, PAGE_SIZE - offset, size);
local_irq_save(flags);
page = pfn_to_page(pfn);
if (dir == DMA_TO_DEVICE)
memcpy_from_page(vaddr, page, offset, sz);
else
memcpy_to_page(page, offset, vaddr, sz);
local_irq_restore(flags);
size -= sz;
pfn++;
vaddr += sz;
offset = 0;
}
} else if (dir == DMA_TO_DEVICE) {
memcpy(vaddr, phys_to_virt(orig_addr), size);
} else {
memcpy(phys_to_virt(orig_addr), vaddr, size);
}
}
static inline phys_addr_t slot_addr(phys_addr_t start, phys_addr_t idx)
{
return start + (idx << IO_TLB_SHIFT);
}
swiotlb: Add warnings for use of bounce buffers with SME Add warnings to let the user know when bounce buffers are being used for DMA when SME is active. Since the bounce buffers are not in encrypted memory, these notifications are to allow the user to determine some appropriate action - if necessary. Actions can range from utilizing an IOMMU, replacing the device with another device that can support 64-bit DMA, ignoring the message if the device isn't used much, etc. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/d112564053c3f2e86ca634a8d4fa4abc0eb53a6a.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-17 21:10:22 +00:00
/*
* Carefully handle integer overflow which can occur when boundary_mask == ~0UL.
*/
static inline unsigned long get_max_slots(unsigned long boundary_mask)
{
return (boundary_mask >> IO_TLB_SHIFT) + 1;
}
static unsigned int wrap_area_index(struct io_tlb_pool *mem, unsigned int index)
{
if (index >= mem->area_nslabs)
return 0;
return index;
}
swiotlb: add swiotlb_tbl_map_single library function swiotlb_tbl_map_single() takes the dma address of iotlb instead of using swiotlb_virt_to_bus(). [v2: changed swiotlb_tlb to swiotlb_tbl] [v3: changed u64 to dma_addr_t] This patch: This is a set of patches that separate the address translation (virt_to_phys, virt_to_bus, etc) and allocation of the SWIOTLB buffer from the SWIOTLB library. The idea behind this set of patches is to make it possible to have separate mechanisms for translating virtual to physical or virtual to DMA addresses on platforms which need an SWIOTLB, and where physical != PCI bus address and also to allocate the core IOTLB memory outside SWIOTLB. One customers of this is the pv-ops project, which can switch between different modes of operation depending on the environment it is running in: bare-metal or virtualized (Xen for now). Another is the Wii DMA - used to implement the MEM2 DMA facility needed by its EHCI controller (for details: http://lkml.org/lkml/2010/5/18/303) On bare-metal SWIOTLB is used when there are no hardware IOMMU. In virtualized environment it used when PCI pass-through is enabled for the guest. The problems with PCI pass-through is that the guest's idea of PFN's is not the real thing. To fix that, there is translation layer for PFN->machine frame number and vice-versa. To bubble that up to the SWIOTLB layer there are two possible solutions. One solution has been to wholesale copy the SWIOTLB, stick it in arch/x86/xen/swiotlb.c and modify the virt_to_phys, phys_to_virt and others to use the Xen address translation functions. Unfortunately, since the kernel can run on bare-metal, there would be big code overlap with the real SWIOTLB. (git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git xen/dom0/swiotlb-new) Another approach, which this set of patches explores, is to abstract the address translation and address determination functions away from the SWIOTLB book-keeping functions. This way the core SWIOTLB library functions are present in one place, while the address related functions are in a separate library that can be loaded when running under non-bare-metal platform. Changelog: Since the last posting [v8.2] Konrad has done: - Added this changelog in the patch and referenced in the other patches this description. - 'enum dma_data_direction direction' to 'enum dma.. dir' so to be unified. [v8-v8.2 changes:] - Rolled-up the last two patches in one. - Rebased against linus latest. That meant dealing with swiotlb_sync_single_range_* changes. - added Acked-by: Fujita Tomonori and Tested-by: Albert Herranz [v7-v8 changes:] - Minimized the list of exported functions. - Integrated Fujita's patches and changed "swiotlb_tlb" to "swiotlb_tbl" in them. [v6-v7 changes:] - Minimized the amount of exported functions/variable with a prefix of: "swiotbl_tbl". - Made the usage of 'int dir' to be 'enum dma_data_direction'. [v5-v6 changes:] - Made the exported functions/variables have the 'swiotlb_bk' prefix. - dropped the checkpatches/other reworks Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Albert Herranz <albert_herranz@yahoo.es>
2010-05-10 19:14:54 +00:00
/*
* Track the total used slots with a global atomic value in order to have
* correct information to determine the high water mark. The mem_used()
* function gives imprecise results because there's no locking across
* multiple areas.
*/
#ifdef CONFIG_DEBUG_FS
static void inc_used_and_hiwater(struct io_tlb_mem *mem, unsigned int nslots)
{
unsigned long old_hiwater, new_used;
new_used = atomic_long_add_return(nslots, &mem->total_used);
old_hiwater = atomic_long_read(&mem->used_hiwater);
do {
if (new_used <= old_hiwater)
break;
} while (!atomic_long_try_cmpxchg(&mem->used_hiwater,
&old_hiwater, new_used));
}
static void dec_used(struct io_tlb_mem *mem, unsigned int nslots)
{
atomic_long_sub(nslots, &mem->total_used);
}
#else /* !CONFIG_DEBUG_FS */
static void inc_used_and_hiwater(struct io_tlb_mem *mem, unsigned int nslots)
{
}
static void dec_used(struct io_tlb_mem *mem, unsigned int nslots)
{
}
#endif /* CONFIG_DEBUG_FS */
#ifdef CONFIG_SWIOTLB_DYNAMIC
#ifdef CONFIG_DEBUG_FS
static void inc_transient_used(struct io_tlb_mem *mem, unsigned int nslots)
{
atomic_long_add(nslots, &mem->transient_nslabs);
}
static void dec_transient_used(struct io_tlb_mem *mem, unsigned int nslots)
{
atomic_long_sub(nslots, &mem->transient_nslabs);
}
#else /* !CONFIG_DEBUG_FS */
static void inc_transient_used(struct io_tlb_mem *mem, unsigned int nslots)
{
}
static void dec_transient_used(struct io_tlb_mem *mem, unsigned int nslots)
{
}
#endif /* CONFIG_DEBUG_FS */
#endif /* CONFIG_SWIOTLB_DYNAMIC */
/**
swiotlb: reduce area lock contention for non-primary IO TLB pools If multiple areas and multiple IO TLB pools exist, first iterate the current CPU specific area in all pools. Then move to the next area index. This is best illustrated by a diagram: area 0 | area 1 | ... | area M | pool 0 A B C pool 1 D E ... pool N F G H Currently, each pool is searched before moving on to the next pool, i.e. the search order is A, B ... C, D, E ... F, G ... H. With this patch, each area is searched in all pools before moving on to the next area, i.e. the search order is A, D ... F, B, E ... G ... C ... H. Note that preemption is not disabled, and raw_smp_processor_id() may not return a stable result, but it is called only once to determine the initial area index. The search will iterate over all areas eventually, even if the current task is preempted. Next, some pools may have less (but not more) areas than default_nareas. Skip such pools if the distance from the initial area index is greater than pool->nareas. This logic ensures that for every pool the search starts in the initial CPU's own area and never tries any area twice. To verify performance impact, I booted the kernel with a minimum pool size ("swiotlb=512,4,force"), so multiple pools get allocated, and I ran these benchmarks: - small: single-threaded I/O of 4 KiB blocks, - big: single-threaded I/O of 64 KiB blocks, - 4way: 4-way parallel I/O of 4 KiB blocks. The "var" column in the tables below is the coefficient of variance over 5 runs of the test, the "diff" column is the relative difference against base in read-write I/O bandwidth (MiB/s). Tested on an x86 VM against a QEMU virtio SATA driver backed by a RAM-based block device on the host: base patched var var diff small 0.69% 0.62% +25.4% big 2.14% 2.27% +25.7% 4way 2.65% 1.70% +23.6% Tested on a Raspberry Pi against a class-10 A1 microSD card: base patched var var diff small 0.53% 1.96% -0.3% big 0.02% 0.57% +0.8% 4way 6.17% 0.40% +0.3% These results confirm that there is significant performance boost in the software IO TLB slot allocation itself. Where performance is dominated by actual hardware, there is no measurable change. Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-12-01 12:13:52 +00:00
* swiotlb_search_pool_area() - search one memory area in one pool
* @dev: Device which maps the buffer.
* @pool: Memory pool to be searched.
* @area_index: Index of the IO TLB memory area to be searched.
* @orig_addr: Original (non-bounced) IO buffer address.
* @alloc_size: Total requested size of the bounce buffer,
* including initial alignment padding.
* @alloc_align_mask: Required alignment of the allocated buffer.
*
* Find a suitable sequence of IO TLB entries for the request and allocate
* a buffer from the given IO TLB memory area.
* This function takes care of locking.
*
* Return: Index of the first allocated slot, or -1 on error.
*/
swiotlb: reduce area lock contention for non-primary IO TLB pools If multiple areas and multiple IO TLB pools exist, first iterate the current CPU specific area in all pools. Then move to the next area index. This is best illustrated by a diagram: area 0 | area 1 | ... | area M | pool 0 A B C pool 1 D E ... pool N F G H Currently, each pool is searched before moving on to the next pool, i.e. the search order is A, B ... C, D, E ... F, G ... H. With this patch, each area is searched in all pools before moving on to the next area, i.e. the search order is A, D ... F, B, E ... G ... C ... H. Note that preemption is not disabled, and raw_smp_processor_id() may not return a stable result, but it is called only once to determine the initial area index. The search will iterate over all areas eventually, even if the current task is preempted. Next, some pools may have less (but not more) areas than default_nareas. Skip such pools if the distance from the initial area index is greater than pool->nareas. This logic ensures that for every pool the search starts in the initial CPU's own area and never tries any area twice. To verify performance impact, I booted the kernel with a minimum pool size ("swiotlb=512,4,force"), so multiple pools get allocated, and I ran these benchmarks: - small: single-threaded I/O of 4 KiB blocks, - big: single-threaded I/O of 64 KiB blocks, - 4way: 4-way parallel I/O of 4 KiB blocks. The "var" column in the tables below is the coefficient of variance over 5 runs of the test, the "diff" column is the relative difference against base in read-write I/O bandwidth (MiB/s). Tested on an x86 VM against a QEMU virtio SATA driver backed by a RAM-based block device on the host: base patched var var diff small 0.69% 0.62% +25.4% big 2.14% 2.27% +25.7% 4way 2.65% 1.70% +23.6% Tested on a Raspberry Pi against a class-10 A1 microSD card: base patched var var diff small 0.53% 1.96% -0.3% big 0.02% 0.57% +0.8% 4way 6.17% 0.40% +0.3% These results confirm that there is significant performance boost in the software IO TLB slot allocation itself. Where performance is dominated by actual hardware, there is no measurable change. Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-12-01 12:13:52 +00:00
static int swiotlb_search_pool_area(struct device *dev, struct io_tlb_pool *pool,
int area_index, phys_addr_t orig_addr, size_t alloc_size,
unsigned int alloc_align_mask)
{
struct io_tlb_area *area = pool->areas + area_index;
unsigned long boundary_mask = dma_get_seg_boundary(dev);
dma_addr_t tbl_dma_addr =
phys_to_dma_unencrypted(dev, pool->start) & boundary_mask;
unsigned long max_slots = get_max_slots(boundary_mask);
unsigned int iotlb_align_mask = dma_get_min_align_mask(dev);
unsigned int nslots = nr_slots(alloc_size), stride;
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary Allow a buffer pre-padding of up to alloc_align_mask, even if it requires allocating additional IO TLB slots. If the allocation alignment is bigger than IO_TLB_SIZE and min_align_mask covers any non-zero bits in the original address between IO_TLB_SIZE and alloc_align_mask, these bits are not preserved in the swiotlb buffer address. To fix this case, increase the allocation size and use a larger offset within the allocated buffer. As a result, extra padding slots may be allocated before the mapping start address. Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR. These slots do not correspond to any CPU buffer, so attempts to sync the data should be ignored. The padding slots should be automatically released when the buffer is unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the DMA buffer slot, not the first padding slot. Save the number of padding slots in struct io_tlb_slot and use it to adjust the slot index in swiotlb_release_slots(), so all allocated slots are properly freed. Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present") Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/ Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-25 08:31:04 +00:00
unsigned int offset = swiotlb_align_offset(dev, 0, orig_addr);
swiotlb: fix the deadlock in swiotlb_do_find_slots In general, if swiotlb is sufficient, the logic of index = wrap_area_index(mem, index + 1) is fine, it will quickly take a slot and release the area->lock; But if swiotlb is insufficient and the device has min_align_mask requirements, such as NVME, we may not be able to satisfy index == wrap and exit the loop properly. In this case, other kernel threads will not be able to acquire the area->lock and release the slot, resulting in a deadlock. The current implementation of wrap_area_index does not involve a modulo operation, so adjusting the wrap to ensure the loop ends is not trivial. Introduce a new variable to record the number of loops and exit the loop after completing the traversal. Backtraces: Other CPUs are waiting this core to exit the swiotlb_do_find_slots loop. [10199.924391] RIP: 0010:swiotlb_do_find_slots+0x1fe/0x3e0 [10199.924403] Call Trace: [10199.924404] <TASK> [10199.924405] swiotlb_tbl_map_single+0xec/0x1f0 [10199.924407] swiotlb_map+0x5c/0x260 [10199.924409] ? nvme_pci_setup_prps+0x1ed/0x340 [10199.924411] dma_direct_map_page+0x12e/0x1c0 [10199.924413] nvme_map_data+0x304/0x370 [10199.924415] nvme_prep_rq.part.0+0x31/0x120 [10199.924417] nvme_queue_rq+0x77/0x1f0 ... [ 9639.596311] NMI backtrace for cpu 48 [ 9639.596336] Call Trace: [ 9639.596337] [ 9639.596338] _raw_spin_lock_irqsave+0x37/0x40 [ 9639.596341] swiotlb_do_find_slots+0xef/0x3e0 [ 9639.596344] swiotlb_tbl_map_single+0xec/0x1f0 [ 9639.596347] swiotlb_map+0x5c/0x260 [ 9639.596349] dma_direct_map_sg+0x7a/0x280 [ 9639.596352] __dma_map_sg_attrs+0x30/0x70 [ 9639.596355] dma_map_sgtable+0x1d/0x30 [ 9639.596356] nvme_map_data+0xce/0x370 ... [ 9639.595665] NMI backtrace for cpu 50 [ 9639.595682] Call Trace: [ 9639.595682] [ 9639.595683] _raw_spin_lock_irqsave+0x37/0x40 [ 9639.595686] swiotlb_release_slots.isra.0+0x86/0x180 [ 9639.595688] dma_direct_unmap_sg+0xcf/0x1a0 [ 9639.595690] nvme_unmap_data.part.0+0x43/0xc0 Fixes: 1f221a0d0dbf ("swiotlb: respect min_align_mask") Signed-off-by: GuoRui.Yu <GuoRui.Yu@linux.alibaba.com> Signed-off-by: Xiaokang Hu <xiaokang.hxk@alibaba-inc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-02-22 16:53:15 +00:00
unsigned int index, slots_checked, count = 0, i;
unsigned long flags;
unsigned int slot_base;
unsigned int slot_index;
BUG_ON(!nslots);
BUG_ON(area_index >= pool->nareas);
/*
* Historically, swiotlb allocations >= PAGE_SIZE were guaranteed to be
* page-aligned in the absence of any other alignment requirements.
* 'alloc_align_mask' was later introduced to specify the alignment
* explicitly, however this is passed as zero for streaming mappings
* and so we preserve the old behaviour there in case any drivers are
* relying on it.
*/
if (!alloc_align_mask && !iotlb_align_mask && alloc_size >= PAGE_SIZE)
alloc_align_mask = PAGE_SIZE - 1;
/*
* Ensure that the allocation is at least slot-aligned and update
* 'iotlb_align_mask' to ignore bits that will be preserved when
* offsetting into the allocation.
*/
alloc_align_mask |= (IO_TLB_SIZE - 1);
iotlb_align_mask &= ~alloc_align_mask;
/*
swiotlb: Fix double-allocation of slots due to broken alignment handling Commit bbb73a103fbb ("swiotlb: fix a braino in the alignment check fix"), which was a fix for commit 0eee5ae10256 ("swiotlb: fix slot alignment checks"), causes a functional regression with vsock in a virtual machine using bouncing via a restricted DMA SWIOTLB pool. When virtio allocates the virtqueues for the vsock device using dma_alloc_coherent(), the SWIOTLB search can return page-unaligned allocations if 'area->index' was left unaligned by a previous allocation from the buffer: # Final address in brackets is the SWIOTLB address returned to the caller | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1645-1649/7168 (0x98326800) | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1649-1653/7168 (0x98328800) | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1653-1657/7168 (0x9832a800) This ends badly (typically buffer corruption and/or a hang) because swiotlb_alloc() is expecting a page-aligned allocation and so blindly returns a pointer to the 'struct page' corresponding to the allocation, therefore double-allocating the first half (2KiB slot) of the 4KiB page. Fix the problem by treating the allocation alignment separately to any additional alignment requirements from the device, using the maximum of the two as the stride to search the buffer slots and taking care to ensure a minimum of page-alignment for buffers larger than a page. This also resolves swiotlb allocation failures occuring due to the inclusion of ~PAGE_MASK in 'iotlb_align_mask' for large allocations and resulting in alignment requirements exceeding swiotlb_max_mapping_size(). Fixes: bbb73a103fbb ("swiotlb: fix a braino in the alignment check fix") Fixes: 0eee5ae10256 ("swiotlb: fix slot alignment checks") Signed-off-by: Will Deacon <will@kernel.org> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-08 15:28:24 +00:00
* For mappings with an alignment requirement don't bother looping to
* unaligned slots once we found an aligned one.
*/
swiotlb: Fix double-allocation of slots due to broken alignment handling Commit bbb73a103fbb ("swiotlb: fix a braino in the alignment check fix"), which was a fix for commit 0eee5ae10256 ("swiotlb: fix slot alignment checks"), causes a functional regression with vsock in a virtual machine using bouncing via a restricted DMA SWIOTLB pool. When virtio allocates the virtqueues for the vsock device using dma_alloc_coherent(), the SWIOTLB search can return page-unaligned allocations if 'area->index' was left unaligned by a previous allocation from the buffer: # Final address in brackets is the SWIOTLB address returned to the caller | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1645-1649/7168 (0x98326800) | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1649-1653/7168 (0x98328800) | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1653-1657/7168 (0x9832a800) This ends badly (typically buffer corruption and/or a hang) because swiotlb_alloc() is expecting a page-aligned allocation and so blindly returns a pointer to the 'struct page' corresponding to the allocation, therefore double-allocating the first half (2KiB slot) of the 4KiB page. Fix the problem by treating the allocation alignment separately to any additional alignment requirements from the device, using the maximum of the two as the stride to search the buffer slots and taking care to ensure a minimum of page-alignment for buffers larger than a page. This also resolves swiotlb allocation failures occuring due to the inclusion of ~PAGE_MASK in 'iotlb_align_mask' for large allocations and resulting in alignment requirements exceeding swiotlb_max_mapping_size(). Fixes: bbb73a103fbb ("swiotlb: fix a braino in the alignment check fix") Fixes: 0eee5ae10256 ("swiotlb: fix slot alignment checks") Signed-off-by: Will Deacon <will@kernel.org> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-08 15:28:24 +00:00
stride = get_max_slots(max(alloc_align_mask, iotlb_align_mask));
spin_lock_irqsave(&area->lock, flags);
if (unlikely(nslots > pool->area_nslabs - area->used))
goto not_found;
slot_base = area_index * pool->area_nslabs;
index = area->index;
for (slots_checked = 0; slots_checked < pool->area_nslabs; ) {
swiotlb: Fix double-allocation of slots due to broken alignment handling Commit bbb73a103fbb ("swiotlb: fix a braino in the alignment check fix"), which was a fix for commit 0eee5ae10256 ("swiotlb: fix slot alignment checks"), causes a functional regression with vsock in a virtual machine using bouncing via a restricted DMA SWIOTLB pool. When virtio allocates the virtqueues for the vsock device using dma_alloc_coherent(), the SWIOTLB search can return page-unaligned allocations if 'area->index' was left unaligned by a previous allocation from the buffer: # Final address in brackets is the SWIOTLB address returned to the caller | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1645-1649/7168 (0x98326800) | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1649-1653/7168 (0x98328800) | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1653-1657/7168 (0x9832a800) This ends badly (typically buffer corruption and/or a hang) because swiotlb_alloc() is expecting a page-aligned allocation and so blindly returns a pointer to the 'struct page' corresponding to the allocation, therefore double-allocating the first half (2KiB slot) of the 4KiB page. Fix the problem by treating the allocation alignment separately to any additional alignment requirements from the device, using the maximum of the two as the stride to search the buffer slots and taking care to ensure a minimum of page-alignment for buffers larger than a page. This also resolves swiotlb allocation failures occuring due to the inclusion of ~PAGE_MASK in 'iotlb_align_mask' for large allocations and resulting in alignment requirements exceeding swiotlb_max_mapping_size(). Fixes: bbb73a103fbb ("swiotlb: fix a braino in the alignment check fix") Fixes: 0eee5ae10256 ("swiotlb: fix slot alignment checks") Signed-off-by: Will Deacon <will@kernel.org> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-08 15:28:24 +00:00
phys_addr_t tlb_addr;
slot_index = slot_base + index;
swiotlb: Fix double-allocation of slots due to broken alignment handling Commit bbb73a103fbb ("swiotlb: fix a braino in the alignment check fix"), which was a fix for commit 0eee5ae10256 ("swiotlb: fix slot alignment checks"), causes a functional regression with vsock in a virtual machine using bouncing via a restricted DMA SWIOTLB pool. When virtio allocates the virtqueues for the vsock device using dma_alloc_coherent(), the SWIOTLB search can return page-unaligned allocations if 'area->index' was left unaligned by a previous allocation from the buffer: # Final address in brackets is the SWIOTLB address returned to the caller | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1645-1649/7168 (0x98326800) | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1649-1653/7168 (0x98328800) | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1653-1657/7168 (0x9832a800) This ends badly (typically buffer corruption and/or a hang) because swiotlb_alloc() is expecting a page-aligned allocation and so blindly returns a pointer to the 'struct page' corresponding to the allocation, therefore double-allocating the first half (2KiB slot) of the 4KiB page. Fix the problem by treating the allocation alignment separately to any additional alignment requirements from the device, using the maximum of the two as the stride to search the buffer slots and taking care to ensure a minimum of page-alignment for buffers larger than a page. This also resolves swiotlb allocation failures occuring due to the inclusion of ~PAGE_MASK in 'iotlb_align_mask' for large allocations and resulting in alignment requirements exceeding swiotlb_max_mapping_size(). Fixes: bbb73a103fbb ("swiotlb: fix a braino in the alignment check fix") Fixes: 0eee5ae10256 ("swiotlb: fix slot alignment checks") Signed-off-by: Will Deacon <will@kernel.org> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-08 15:28:24 +00:00
tlb_addr = slot_addr(tbl_dma_addr, slot_index);
swiotlb: Fix double-allocation of slots due to broken alignment handling Commit bbb73a103fbb ("swiotlb: fix a braino in the alignment check fix"), which was a fix for commit 0eee5ae10256 ("swiotlb: fix slot alignment checks"), causes a functional regression with vsock in a virtual machine using bouncing via a restricted DMA SWIOTLB pool. When virtio allocates the virtqueues for the vsock device using dma_alloc_coherent(), the SWIOTLB search can return page-unaligned allocations if 'area->index' was left unaligned by a previous allocation from the buffer: # Final address in brackets is the SWIOTLB address returned to the caller | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1645-1649/7168 (0x98326800) | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1649-1653/7168 (0x98328800) | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1653-1657/7168 (0x9832a800) This ends badly (typically buffer corruption and/or a hang) because swiotlb_alloc() is expecting a page-aligned allocation and so blindly returns a pointer to the 'struct page' corresponding to the allocation, therefore double-allocating the first half (2KiB slot) of the 4KiB page. Fix the problem by treating the allocation alignment separately to any additional alignment requirements from the device, using the maximum of the two as the stride to search the buffer slots and taking care to ensure a minimum of page-alignment for buffers larger than a page. This also resolves swiotlb allocation failures occuring due to the inclusion of ~PAGE_MASK in 'iotlb_align_mask' for large allocations and resulting in alignment requirements exceeding swiotlb_max_mapping_size(). Fixes: bbb73a103fbb ("swiotlb: fix a braino in the alignment check fix") Fixes: 0eee5ae10256 ("swiotlb: fix slot alignment checks") Signed-off-by: Will Deacon <will@kernel.org> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-08 15:28:24 +00:00
if ((tlb_addr & alloc_align_mask) ||
(orig_addr && (tlb_addr & iotlb_align_mask) !=
(orig_addr & iotlb_align_mask))) {
index = wrap_area_index(pool, index + 1);
swiotlb: fix the deadlock in swiotlb_do_find_slots In general, if swiotlb is sufficient, the logic of index = wrap_area_index(mem, index + 1) is fine, it will quickly take a slot and release the area->lock; But if swiotlb is insufficient and the device has min_align_mask requirements, such as NVME, we may not be able to satisfy index == wrap and exit the loop properly. In this case, other kernel threads will not be able to acquire the area->lock and release the slot, resulting in a deadlock. The current implementation of wrap_area_index does not involve a modulo operation, so adjusting the wrap to ensure the loop ends is not trivial. Introduce a new variable to record the number of loops and exit the loop after completing the traversal. Backtraces: Other CPUs are waiting this core to exit the swiotlb_do_find_slots loop. [10199.924391] RIP: 0010:swiotlb_do_find_slots+0x1fe/0x3e0 [10199.924403] Call Trace: [10199.924404] <TASK> [10199.924405] swiotlb_tbl_map_single+0xec/0x1f0 [10199.924407] swiotlb_map+0x5c/0x260 [10199.924409] ? nvme_pci_setup_prps+0x1ed/0x340 [10199.924411] dma_direct_map_page+0x12e/0x1c0 [10199.924413] nvme_map_data+0x304/0x370 [10199.924415] nvme_prep_rq.part.0+0x31/0x120 [10199.924417] nvme_queue_rq+0x77/0x1f0 ... [ 9639.596311] NMI backtrace for cpu 48 [ 9639.596336] Call Trace: [ 9639.596337] [ 9639.596338] _raw_spin_lock_irqsave+0x37/0x40 [ 9639.596341] swiotlb_do_find_slots+0xef/0x3e0 [ 9639.596344] swiotlb_tbl_map_single+0xec/0x1f0 [ 9639.596347] swiotlb_map+0x5c/0x260 [ 9639.596349] dma_direct_map_sg+0x7a/0x280 [ 9639.596352] __dma_map_sg_attrs+0x30/0x70 [ 9639.596355] dma_map_sgtable+0x1d/0x30 [ 9639.596356] nvme_map_data+0xce/0x370 ... [ 9639.595665] NMI backtrace for cpu 50 [ 9639.595682] Call Trace: [ 9639.595682] [ 9639.595683] _raw_spin_lock_irqsave+0x37/0x40 [ 9639.595686] swiotlb_release_slots.isra.0+0x86/0x180 [ 9639.595688] dma_direct_unmap_sg+0xcf/0x1a0 [ 9639.595690] nvme_unmap_data.part.0+0x43/0xc0 Fixes: 1f221a0d0dbf ("swiotlb: respect min_align_mask") Signed-off-by: GuoRui.Yu <GuoRui.Yu@linux.alibaba.com> Signed-off-by: Xiaokang Hu <xiaokang.hxk@alibaba-inc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-02-22 16:53:15 +00:00
slots_checked++;
continue;
}
if (!iommu_is_span_boundary(slot_index, nslots,
nr_slots(tbl_dma_addr),
max_slots)) {
if (pool->slots[slot_index].list >= nslots)
goto found;
}
index = wrap_area_index(pool, index + stride);
swiotlb: fix the deadlock in swiotlb_do_find_slots In general, if swiotlb is sufficient, the logic of index = wrap_area_index(mem, index + 1) is fine, it will quickly take a slot and release the area->lock; But if swiotlb is insufficient and the device has min_align_mask requirements, such as NVME, we may not be able to satisfy index == wrap and exit the loop properly. In this case, other kernel threads will not be able to acquire the area->lock and release the slot, resulting in a deadlock. The current implementation of wrap_area_index does not involve a modulo operation, so adjusting the wrap to ensure the loop ends is not trivial. Introduce a new variable to record the number of loops and exit the loop after completing the traversal. Backtraces: Other CPUs are waiting this core to exit the swiotlb_do_find_slots loop. [10199.924391] RIP: 0010:swiotlb_do_find_slots+0x1fe/0x3e0 [10199.924403] Call Trace: [10199.924404] <TASK> [10199.924405] swiotlb_tbl_map_single+0xec/0x1f0 [10199.924407] swiotlb_map+0x5c/0x260 [10199.924409] ? nvme_pci_setup_prps+0x1ed/0x340 [10199.924411] dma_direct_map_page+0x12e/0x1c0 [10199.924413] nvme_map_data+0x304/0x370 [10199.924415] nvme_prep_rq.part.0+0x31/0x120 [10199.924417] nvme_queue_rq+0x77/0x1f0 ... [ 9639.596311] NMI backtrace for cpu 48 [ 9639.596336] Call Trace: [ 9639.596337] [ 9639.596338] _raw_spin_lock_irqsave+0x37/0x40 [ 9639.596341] swiotlb_do_find_slots+0xef/0x3e0 [ 9639.596344] swiotlb_tbl_map_single+0xec/0x1f0 [ 9639.596347] swiotlb_map+0x5c/0x260 [ 9639.596349] dma_direct_map_sg+0x7a/0x280 [ 9639.596352] __dma_map_sg_attrs+0x30/0x70 [ 9639.596355] dma_map_sgtable+0x1d/0x30 [ 9639.596356] nvme_map_data+0xce/0x370 ... [ 9639.595665] NMI backtrace for cpu 50 [ 9639.595682] Call Trace: [ 9639.595682] [ 9639.595683] _raw_spin_lock_irqsave+0x37/0x40 [ 9639.595686] swiotlb_release_slots.isra.0+0x86/0x180 [ 9639.595688] dma_direct_unmap_sg+0xcf/0x1a0 [ 9639.595690] nvme_unmap_data.part.0+0x43/0xc0 Fixes: 1f221a0d0dbf ("swiotlb: respect min_align_mask") Signed-off-by: GuoRui.Yu <GuoRui.Yu@linux.alibaba.com> Signed-off-by: Xiaokang Hu <xiaokang.hxk@alibaba-inc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-02-22 16:53:15 +00:00
slots_checked += stride;
}
not_found:
spin_unlock_irqrestore(&area->lock, flags);
return -1;
found:
/*
* If we find a slot that indicates we have 'nslots' number of
* contiguous buffers, we allocate the buffers from that slot onwards
* and set the list of free entries to '0' indicating unavailable.
*/
for (i = slot_index; i < slot_index + nslots; i++) {
pool->slots[i].list = 0;
pool->slots[i].alloc_size = alloc_size - (offset +
((i - slot_index) << IO_TLB_SHIFT));
}
for (i = slot_index - 1;
io_tlb_offset(i) != IO_TLB_SEGSIZE - 1 &&
pool->slots[i].list; i--)
pool->slots[i].list = ++count;
/*
* Update the indices to avoid searching in the next round.
*/
area->index = wrap_area_index(pool, index + nslots);
area->used += nslots;
spin_unlock_irqrestore(&area->lock, flags);
inc_used_and_hiwater(dev->dma_io_tlb_mem, nslots);
return slot_index;
}
swiotlb: reduce area lock contention for non-primary IO TLB pools If multiple areas and multiple IO TLB pools exist, first iterate the current CPU specific area in all pools. Then move to the next area index. This is best illustrated by a diagram: area 0 | area 1 | ... | area M | pool 0 A B C pool 1 D E ... pool N F G H Currently, each pool is searched before moving on to the next pool, i.e. the search order is A, B ... C, D, E ... F, G ... H. With this patch, each area is searched in all pools before moving on to the next area, i.e. the search order is A, D ... F, B, E ... G ... C ... H. Note that preemption is not disabled, and raw_smp_processor_id() may not return a stable result, but it is called only once to determine the initial area index. The search will iterate over all areas eventually, even if the current task is preempted. Next, some pools may have less (but not more) areas than default_nareas. Skip such pools if the distance from the initial area index is greater than pool->nareas. This logic ensures that for every pool the search starts in the initial CPU's own area and never tries any area twice. To verify performance impact, I booted the kernel with a minimum pool size ("swiotlb=512,4,force"), so multiple pools get allocated, and I ran these benchmarks: - small: single-threaded I/O of 4 KiB blocks, - big: single-threaded I/O of 64 KiB blocks, - 4way: 4-way parallel I/O of 4 KiB blocks. The "var" column in the tables below is the coefficient of variance over 5 runs of the test, the "diff" column is the relative difference against base in read-write I/O bandwidth (MiB/s). Tested on an x86 VM against a QEMU virtio SATA driver backed by a RAM-based block device on the host: base patched var var diff small 0.69% 0.62% +25.4% big 2.14% 2.27% +25.7% 4way 2.65% 1.70% +23.6% Tested on a Raspberry Pi against a class-10 A1 microSD card: base patched var var diff small 0.53% 1.96% -0.3% big 0.02% 0.57% +0.8% 4way 6.17% 0.40% +0.3% These results confirm that there is significant performance boost in the software IO TLB slot allocation itself. Where performance is dominated by actual hardware, there is no measurable change. Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-12-01 12:13:52 +00:00
#ifdef CONFIG_SWIOTLB_DYNAMIC
/**
swiotlb: reduce area lock contention for non-primary IO TLB pools If multiple areas and multiple IO TLB pools exist, first iterate the current CPU specific area in all pools. Then move to the next area index. This is best illustrated by a diagram: area 0 | area 1 | ... | area M | pool 0 A B C pool 1 D E ... pool N F G H Currently, each pool is searched before moving on to the next pool, i.e. the search order is A, B ... C, D, E ... F, G ... H. With this patch, each area is searched in all pools before moving on to the next area, i.e. the search order is A, D ... F, B, E ... G ... C ... H. Note that preemption is not disabled, and raw_smp_processor_id() may not return a stable result, but it is called only once to determine the initial area index. The search will iterate over all areas eventually, even if the current task is preempted. Next, some pools may have less (but not more) areas than default_nareas. Skip such pools if the distance from the initial area index is greater than pool->nareas. This logic ensures that for every pool the search starts in the initial CPU's own area and never tries any area twice. To verify performance impact, I booted the kernel with a minimum pool size ("swiotlb=512,4,force"), so multiple pools get allocated, and I ran these benchmarks: - small: single-threaded I/O of 4 KiB blocks, - big: single-threaded I/O of 64 KiB blocks, - 4way: 4-way parallel I/O of 4 KiB blocks. The "var" column in the tables below is the coefficient of variance over 5 runs of the test, the "diff" column is the relative difference against base in read-write I/O bandwidth (MiB/s). Tested on an x86 VM against a QEMU virtio SATA driver backed by a RAM-based block device on the host: base patched var var diff small 0.69% 0.62% +25.4% big 2.14% 2.27% +25.7% 4way 2.65% 1.70% +23.6% Tested on a Raspberry Pi against a class-10 A1 microSD card: base patched var var diff small 0.53% 1.96% -0.3% big 0.02% 0.57% +0.8% 4way 6.17% 0.40% +0.3% These results confirm that there is significant performance boost in the software IO TLB slot allocation itself. Where performance is dominated by actual hardware, there is no measurable change. Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-12-01 12:13:52 +00:00
* swiotlb_search_area() - search one memory area in all pools
* @dev: Device which maps the buffer.
swiotlb: reduce area lock contention for non-primary IO TLB pools If multiple areas and multiple IO TLB pools exist, first iterate the current CPU specific area in all pools. Then move to the next area index. This is best illustrated by a diagram: area 0 | area 1 | ... | area M | pool 0 A B C pool 1 D E ... pool N F G H Currently, each pool is searched before moving on to the next pool, i.e. the search order is A, B ... C, D, E ... F, G ... H. With this patch, each area is searched in all pools before moving on to the next area, i.e. the search order is A, D ... F, B, E ... G ... C ... H. Note that preemption is not disabled, and raw_smp_processor_id() may not return a stable result, but it is called only once to determine the initial area index. The search will iterate over all areas eventually, even if the current task is preempted. Next, some pools may have less (but not more) areas than default_nareas. Skip such pools if the distance from the initial area index is greater than pool->nareas. This logic ensures that for every pool the search starts in the initial CPU's own area and never tries any area twice. To verify performance impact, I booted the kernel with a minimum pool size ("swiotlb=512,4,force"), so multiple pools get allocated, and I ran these benchmarks: - small: single-threaded I/O of 4 KiB blocks, - big: single-threaded I/O of 64 KiB blocks, - 4way: 4-way parallel I/O of 4 KiB blocks. The "var" column in the tables below is the coefficient of variance over 5 runs of the test, the "diff" column is the relative difference against base in read-write I/O bandwidth (MiB/s). Tested on an x86 VM against a QEMU virtio SATA driver backed by a RAM-based block device on the host: base patched var var diff small 0.69% 0.62% +25.4% big 2.14% 2.27% +25.7% 4way 2.65% 1.70% +23.6% Tested on a Raspberry Pi against a class-10 A1 microSD card: base patched var var diff small 0.53% 1.96% -0.3% big 0.02% 0.57% +0.8% 4way 6.17% 0.40% +0.3% These results confirm that there is significant performance boost in the software IO TLB slot allocation itself. Where performance is dominated by actual hardware, there is no measurable change. Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-12-01 12:13:52 +00:00
* @start_cpu: Start CPU number.
* @cpu_offset: Offset from @start_cpu.
* @orig_addr: Original (non-bounced) IO buffer address.
* @alloc_size: Total requested size of the bounce buffer,
* including initial alignment padding.
* @alloc_align_mask: Required alignment of the allocated buffer.
swiotlb: reduce area lock contention for non-primary IO TLB pools If multiple areas and multiple IO TLB pools exist, first iterate the current CPU specific area in all pools. Then move to the next area index. This is best illustrated by a diagram: area 0 | area 1 | ... | area M | pool 0 A B C pool 1 D E ... pool N F G H Currently, each pool is searched before moving on to the next pool, i.e. the search order is A, B ... C, D, E ... F, G ... H. With this patch, each area is searched in all pools before moving on to the next area, i.e. the search order is A, D ... F, B, E ... G ... C ... H. Note that preemption is not disabled, and raw_smp_processor_id() may not return a stable result, but it is called only once to determine the initial area index. The search will iterate over all areas eventually, even if the current task is preempted. Next, some pools may have less (but not more) areas than default_nareas. Skip such pools if the distance from the initial area index is greater than pool->nareas. This logic ensures that for every pool the search starts in the initial CPU's own area and never tries any area twice. To verify performance impact, I booted the kernel with a minimum pool size ("swiotlb=512,4,force"), so multiple pools get allocated, and I ran these benchmarks: - small: single-threaded I/O of 4 KiB blocks, - big: single-threaded I/O of 64 KiB blocks, - 4way: 4-way parallel I/O of 4 KiB blocks. The "var" column in the tables below is the coefficient of variance over 5 runs of the test, the "diff" column is the relative difference against base in read-write I/O bandwidth (MiB/s). Tested on an x86 VM against a QEMU virtio SATA driver backed by a RAM-based block device on the host: base patched var var diff small 0.69% 0.62% +25.4% big 2.14% 2.27% +25.7% 4way 2.65% 1.70% +23.6% Tested on a Raspberry Pi against a class-10 A1 microSD card: base patched var var diff small 0.53% 1.96% -0.3% big 0.02% 0.57% +0.8% 4way 6.17% 0.40% +0.3% These results confirm that there is significant performance boost in the software IO TLB slot allocation itself. Where performance is dominated by actual hardware, there is no measurable change. Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-12-01 12:13:52 +00:00
* @retpool: Used memory pool, updated on return.
*
swiotlb: reduce area lock contention for non-primary IO TLB pools If multiple areas and multiple IO TLB pools exist, first iterate the current CPU specific area in all pools. Then move to the next area index. This is best illustrated by a diagram: area 0 | area 1 | ... | area M | pool 0 A B C pool 1 D E ... pool N F G H Currently, each pool is searched before moving on to the next pool, i.e. the search order is A, B ... C, D, E ... F, G ... H. With this patch, each area is searched in all pools before moving on to the next area, i.e. the search order is A, D ... F, B, E ... G ... C ... H. Note that preemption is not disabled, and raw_smp_processor_id() may not return a stable result, but it is called only once to determine the initial area index. The search will iterate over all areas eventually, even if the current task is preempted. Next, some pools may have less (but not more) areas than default_nareas. Skip such pools if the distance from the initial area index is greater than pool->nareas. This logic ensures that for every pool the search starts in the initial CPU's own area and never tries any area twice. To verify performance impact, I booted the kernel with a minimum pool size ("swiotlb=512,4,force"), so multiple pools get allocated, and I ran these benchmarks: - small: single-threaded I/O of 4 KiB blocks, - big: single-threaded I/O of 64 KiB blocks, - 4way: 4-way parallel I/O of 4 KiB blocks. The "var" column in the tables below is the coefficient of variance over 5 runs of the test, the "diff" column is the relative difference against base in read-write I/O bandwidth (MiB/s). Tested on an x86 VM against a QEMU virtio SATA driver backed by a RAM-based block device on the host: base patched var var diff small 0.69% 0.62% +25.4% big 2.14% 2.27% +25.7% 4way 2.65% 1.70% +23.6% Tested on a Raspberry Pi against a class-10 A1 microSD card: base patched var var diff small 0.53% 1.96% -0.3% big 0.02% 0.57% +0.8% 4way 6.17% 0.40% +0.3% These results confirm that there is significant performance boost in the software IO TLB slot allocation itself. Where performance is dominated by actual hardware, there is no measurable change. Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-12-01 12:13:52 +00:00
* Search one memory area in all pools for a sequence of slots that match the
* allocation constraints.
*
* Return: Index of the first allocated slot, or -1 on error.
*/
swiotlb: reduce area lock contention for non-primary IO TLB pools If multiple areas and multiple IO TLB pools exist, first iterate the current CPU specific area in all pools. Then move to the next area index. This is best illustrated by a diagram: area 0 | area 1 | ... | area M | pool 0 A B C pool 1 D E ... pool N F G H Currently, each pool is searched before moving on to the next pool, i.e. the search order is A, B ... C, D, E ... F, G ... H. With this patch, each area is searched in all pools before moving on to the next area, i.e. the search order is A, D ... F, B, E ... G ... C ... H. Note that preemption is not disabled, and raw_smp_processor_id() may not return a stable result, but it is called only once to determine the initial area index. The search will iterate over all areas eventually, even if the current task is preempted. Next, some pools may have less (but not more) areas than default_nareas. Skip such pools if the distance from the initial area index is greater than pool->nareas. This logic ensures that for every pool the search starts in the initial CPU's own area and never tries any area twice. To verify performance impact, I booted the kernel with a minimum pool size ("swiotlb=512,4,force"), so multiple pools get allocated, and I ran these benchmarks: - small: single-threaded I/O of 4 KiB blocks, - big: single-threaded I/O of 64 KiB blocks, - 4way: 4-way parallel I/O of 4 KiB blocks. The "var" column in the tables below is the coefficient of variance over 5 runs of the test, the "diff" column is the relative difference against base in read-write I/O bandwidth (MiB/s). Tested on an x86 VM against a QEMU virtio SATA driver backed by a RAM-based block device on the host: base patched var var diff small 0.69% 0.62% +25.4% big 2.14% 2.27% +25.7% 4way 2.65% 1.70% +23.6% Tested on a Raspberry Pi against a class-10 A1 microSD card: base patched var var diff small 0.53% 1.96% -0.3% big 0.02% 0.57% +0.8% 4way 6.17% 0.40% +0.3% These results confirm that there is significant performance boost in the software IO TLB slot allocation itself. Where performance is dominated by actual hardware, there is no measurable change. Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-12-01 12:13:52 +00:00
static int swiotlb_search_area(struct device *dev, int start_cpu,
int cpu_offset, phys_addr_t orig_addr, size_t alloc_size,
unsigned int alloc_align_mask, struct io_tlb_pool **retpool)
{
swiotlb: reduce area lock contention for non-primary IO TLB pools If multiple areas and multiple IO TLB pools exist, first iterate the current CPU specific area in all pools. Then move to the next area index. This is best illustrated by a diagram: area 0 | area 1 | ... | area M | pool 0 A B C pool 1 D E ... pool N F G H Currently, each pool is searched before moving on to the next pool, i.e. the search order is A, B ... C, D, E ... F, G ... H. With this patch, each area is searched in all pools before moving on to the next area, i.e. the search order is A, D ... F, B, E ... G ... C ... H. Note that preemption is not disabled, and raw_smp_processor_id() may not return a stable result, but it is called only once to determine the initial area index. The search will iterate over all areas eventually, even if the current task is preempted. Next, some pools may have less (but not more) areas than default_nareas. Skip such pools if the distance from the initial area index is greater than pool->nareas. This logic ensures that for every pool the search starts in the initial CPU's own area and never tries any area twice. To verify performance impact, I booted the kernel with a minimum pool size ("swiotlb=512,4,force"), so multiple pools get allocated, and I ran these benchmarks: - small: single-threaded I/O of 4 KiB blocks, - big: single-threaded I/O of 64 KiB blocks, - 4way: 4-way parallel I/O of 4 KiB blocks. The "var" column in the tables below is the coefficient of variance over 5 runs of the test, the "diff" column is the relative difference against base in read-write I/O bandwidth (MiB/s). Tested on an x86 VM against a QEMU virtio SATA driver backed by a RAM-based block device on the host: base patched var var diff small 0.69% 0.62% +25.4% big 2.14% 2.27% +25.7% 4way 2.65% 1.70% +23.6% Tested on a Raspberry Pi against a class-10 A1 microSD card: base patched var var diff small 0.53% 1.96% -0.3% big 0.02% 0.57% +0.8% 4way 6.17% 0.40% +0.3% These results confirm that there is significant performance boost in the software IO TLB slot allocation itself. Where performance is dominated by actual hardware, there is no measurable change. Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-12-01 12:13:52 +00:00
struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
struct io_tlb_pool *pool;
int area_index;
int index = -1;
swiotlb: reduce area lock contention for non-primary IO TLB pools If multiple areas and multiple IO TLB pools exist, first iterate the current CPU specific area in all pools. Then move to the next area index. This is best illustrated by a diagram: area 0 | area 1 | ... | area M | pool 0 A B C pool 1 D E ... pool N F G H Currently, each pool is searched before moving on to the next pool, i.e. the search order is A, B ... C, D, E ... F, G ... H. With this patch, each area is searched in all pools before moving on to the next area, i.e. the search order is A, D ... F, B, E ... G ... C ... H. Note that preemption is not disabled, and raw_smp_processor_id() may not return a stable result, but it is called only once to determine the initial area index. The search will iterate over all areas eventually, even if the current task is preempted. Next, some pools may have less (but not more) areas than default_nareas. Skip such pools if the distance from the initial area index is greater than pool->nareas. This logic ensures that for every pool the search starts in the initial CPU's own area and never tries any area twice. To verify performance impact, I booted the kernel with a minimum pool size ("swiotlb=512,4,force"), so multiple pools get allocated, and I ran these benchmarks: - small: single-threaded I/O of 4 KiB blocks, - big: single-threaded I/O of 64 KiB blocks, - 4way: 4-way parallel I/O of 4 KiB blocks. The "var" column in the tables below is the coefficient of variance over 5 runs of the test, the "diff" column is the relative difference against base in read-write I/O bandwidth (MiB/s). Tested on an x86 VM against a QEMU virtio SATA driver backed by a RAM-based block device on the host: base patched var var diff small 0.69% 0.62% +25.4% big 2.14% 2.27% +25.7% 4way 2.65% 1.70% +23.6% Tested on a Raspberry Pi against a class-10 A1 microSD card: base patched var var diff small 0.53% 1.96% -0.3% big 0.02% 0.57% +0.8% 4way 6.17% 0.40% +0.3% These results confirm that there is significant performance boost in the software IO TLB slot allocation itself. Where performance is dominated by actual hardware, there is no measurable change. Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-12-01 12:13:52 +00:00
rcu_read_lock();
list_for_each_entry_rcu(pool, &mem->pools, node) {
if (cpu_offset >= pool->nareas)
continue;
area_index = (start_cpu + cpu_offset) & (pool->nareas - 1);
index = swiotlb_search_pool_area(dev, pool, area_index,
orig_addr, alloc_size,
alloc_align_mask);
if (index >= 0) {
*retpool = pool;
break;
}
}
rcu_read_unlock();
return index;
}
/**
* swiotlb_find_slots() - search for slots in the whole swiotlb
* @dev: Device which maps the buffer.
* @orig_addr: Original (non-bounced) IO buffer address.
* @alloc_size: Total requested size of the bounce buffer,
* including initial alignment padding.
* @alloc_align_mask: Required alignment of the allocated buffer.
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
* @retpool: Used memory pool, updated on return.
*
* Search through the whole software IO TLB to find a sequence of slots that
* match the allocation constraints.
*
* Return: Index of the first allocated slot, or -1 on error.
*/
static int swiotlb_find_slots(struct device *dev, phys_addr_t orig_addr,
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
size_t alloc_size, unsigned int alloc_align_mask,
struct io_tlb_pool **retpool)
{
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
struct io_tlb_pool *pool;
unsigned long nslabs;
unsigned long flags;
u64 phys_limit;
swiotlb: reduce area lock contention for non-primary IO TLB pools If multiple areas and multiple IO TLB pools exist, first iterate the current CPU specific area in all pools. Then move to the next area index. This is best illustrated by a diagram: area 0 | area 1 | ... | area M | pool 0 A B C pool 1 D E ... pool N F G H Currently, each pool is searched before moving on to the next pool, i.e. the search order is A, B ... C, D, E ... F, G ... H. With this patch, each area is searched in all pools before moving on to the next area, i.e. the search order is A, D ... F, B, E ... G ... C ... H. Note that preemption is not disabled, and raw_smp_processor_id() may not return a stable result, but it is called only once to determine the initial area index. The search will iterate over all areas eventually, even if the current task is preempted. Next, some pools may have less (but not more) areas than default_nareas. Skip such pools if the distance from the initial area index is greater than pool->nareas. This logic ensures that for every pool the search starts in the initial CPU's own area and never tries any area twice. To verify performance impact, I booted the kernel with a minimum pool size ("swiotlb=512,4,force"), so multiple pools get allocated, and I ran these benchmarks: - small: single-threaded I/O of 4 KiB blocks, - big: single-threaded I/O of 64 KiB blocks, - 4way: 4-way parallel I/O of 4 KiB blocks. The "var" column in the tables below is the coefficient of variance over 5 runs of the test, the "diff" column is the relative difference against base in read-write I/O bandwidth (MiB/s). Tested on an x86 VM against a QEMU virtio SATA driver backed by a RAM-based block device on the host: base patched var var diff small 0.69% 0.62% +25.4% big 2.14% 2.27% +25.7% 4way 2.65% 1.70% +23.6% Tested on a Raspberry Pi against a class-10 A1 microSD card: base patched var var diff small 0.53% 1.96% -0.3% big 0.02% 0.57% +0.8% 4way 6.17% 0.40% +0.3% These results confirm that there is significant performance boost in the software IO TLB slot allocation itself. Where performance is dominated by actual hardware, there is no measurable change. Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-12-01 12:13:52 +00:00
int cpu, i;
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
int index;
if (alloc_size > IO_TLB_SEGSIZE * IO_TLB_SIZE)
return -1;
swiotlb: reduce area lock contention for non-primary IO TLB pools If multiple areas and multiple IO TLB pools exist, first iterate the current CPU specific area in all pools. Then move to the next area index. This is best illustrated by a diagram: area 0 | area 1 | ... | area M | pool 0 A B C pool 1 D E ... pool N F G H Currently, each pool is searched before moving on to the next pool, i.e. the search order is A, B ... C, D, E ... F, G ... H. With this patch, each area is searched in all pools before moving on to the next area, i.e. the search order is A, D ... F, B, E ... G ... C ... H. Note that preemption is not disabled, and raw_smp_processor_id() may not return a stable result, but it is called only once to determine the initial area index. The search will iterate over all areas eventually, even if the current task is preempted. Next, some pools may have less (but not more) areas than default_nareas. Skip such pools if the distance from the initial area index is greater than pool->nareas. This logic ensures that for every pool the search starts in the initial CPU's own area and never tries any area twice. To verify performance impact, I booted the kernel with a minimum pool size ("swiotlb=512,4,force"), so multiple pools get allocated, and I ran these benchmarks: - small: single-threaded I/O of 4 KiB blocks, - big: single-threaded I/O of 64 KiB blocks, - 4way: 4-way parallel I/O of 4 KiB blocks. The "var" column in the tables below is the coefficient of variance over 5 runs of the test, the "diff" column is the relative difference against base in read-write I/O bandwidth (MiB/s). Tested on an x86 VM against a QEMU virtio SATA driver backed by a RAM-based block device on the host: base patched var var diff small 0.69% 0.62% +25.4% big 2.14% 2.27% +25.7% 4way 2.65% 1.70% +23.6% Tested on a Raspberry Pi against a class-10 A1 microSD card: base patched var var diff small 0.53% 1.96% -0.3% big 0.02% 0.57% +0.8% 4way 6.17% 0.40% +0.3% These results confirm that there is significant performance boost in the software IO TLB slot allocation itself. Where performance is dominated by actual hardware, there is no measurable change. Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-12-01 12:13:52 +00:00
cpu = raw_smp_processor_id();
for (i = 0; i < default_nareas; ++i) {
index = swiotlb_search_area(dev, cpu, i, orig_addr, alloc_size,
alloc_align_mask, &pool);
if (index >= 0)
goto found;
}
swiotlb: reduce area lock contention for non-primary IO TLB pools If multiple areas and multiple IO TLB pools exist, first iterate the current CPU specific area in all pools. Then move to the next area index. This is best illustrated by a diagram: area 0 | area 1 | ... | area M | pool 0 A B C pool 1 D E ... pool N F G H Currently, each pool is searched before moving on to the next pool, i.e. the search order is A, B ... C, D, E ... F, G ... H. With this patch, each area is searched in all pools before moving on to the next area, i.e. the search order is A, D ... F, B, E ... G ... C ... H. Note that preemption is not disabled, and raw_smp_processor_id() may not return a stable result, but it is called only once to determine the initial area index. The search will iterate over all areas eventually, even if the current task is preempted. Next, some pools may have less (but not more) areas than default_nareas. Skip such pools if the distance from the initial area index is greater than pool->nareas. This logic ensures that for every pool the search starts in the initial CPU's own area and never tries any area twice. To verify performance impact, I booted the kernel with a minimum pool size ("swiotlb=512,4,force"), so multiple pools get allocated, and I ran these benchmarks: - small: single-threaded I/O of 4 KiB blocks, - big: single-threaded I/O of 64 KiB blocks, - 4way: 4-way parallel I/O of 4 KiB blocks. The "var" column in the tables below is the coefficient of variance over 5 runs of the test, the "diff" column is the relative difference against base in read-write I/O bandwidth (MiB/s). Tested on an x86 VM against a QEMU virtio SATA driver backed by a RAM-based block device on the host: base patched var var diff small 0.69% 0.62% +25.4% big 2.14% 2.27% +25.7% 4way 2.65% 1.70% +23.6% Tested on a Raspberry Pi against a class-10 A1 microSD card: base patched var var diff small 0.53% 1.96% -0.3% big 0.02% 0.57% +0.8% 4way 6.17% 0.40% +0.3% These results confirm that there is significant performance boost in the software IO TLB slot allocation itself. Where performance is dominated by actual hardware, there is no measurable change. Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-12-01 12:13:52 +00:00
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
if (!mem->can_grow)
return -1;
schedule_work(&mem->dyn_alloc);
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
nslabs = nr_slots(alloc_size);
phys_limit = min_not_zero(*dev->dma_mask, dev->bus_dma_limit);
pool = swiotlb_alloc_pool(dev, nslabs, nslabs, 1, phys_limit,
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
GFP_NOWAIT | __GFP_NOWARN);
if (!pool)
return -1;
swiotlb: reduce area lock contention for non-primary IO TLB pools If multiple areas and multiple IO TLB pools exist, first iterate the current CPU specific area in all pools. Then move to the next area index. This is best illustrated by a diagram: area 0 | area 1 | ... | area M | pool 0 A B C pool 1 D E ... pool N F G H Currently, each pool is searched before moving on to the next pool, i.e. the search order is A, B ... C, D, E ... F, G ... H. With this patch, each area is searched in all pools before moving on to the next area, i.e. the search order is A, D ... F, B, E ... G ... C ... H. Note that preemption is not disabled, and raw_smp_processor_id() may not return a stable result, but it is called only once to determine the initial area index. The search will iterate over all areas eventually, even if the current task is preempted. Next, some pools may have less (but not more) areas than default_nareas. Skip such pools if the distance from the initial area index is greater than pool->nareas. This logic ensures that for every pool the search starts in the initial CPU's own area and never tries any area twice. To verify performance impact, I booted the kernel with a minimum pool size ("swiotlb=512,4,force"), so multiple pools get allocated, and I ran these benchmarks: - small: single-threaded I/O of 4 KiB blocks, - big: single-threaded I/O of 64 KiB blocks, - 4way: 4-way parallel I/O of 4 KiB blocks. The "var" column in the tables below is the coefficient of variance over 5 runs of the test, the "diff" column is the relative difference against base in read-write I/O bandwidth (MiB/s). Tested on an x86 VM against a QEMU virtio SATA driver backed by a RAM-based block device on the host: base patched var var diff small 0.69% 0.62% +25.4% big 2.14% 2.27% +25.7% 4way 2.65% 1.70% +23.6% Tested on a Raspberry Pi against a class-10 A1 microSD card: base patched var var diff small 0.53% 1.96% -0.3% big 0.02% 0.57% +0.8% 4way 6.17% 0.40% +0.3% These results confirm that there is significant performance boost in the software IO TLB slot allocation itself. Where performance is dominated by actual hardware, there is no measurable change. Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-12-01 12:13:52 +00:00
index = swiotlb_search_pool_area(dev, pool, 0, orig_addr,
alloc_size, alloc_align_mask);
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
if (index < 0) {
swiotlb_dyn_free(&pool->rcu);
return -1;
}
pool->transient = true;
spin_lock_irqsave(&dev->dma_io_tlb_lock, flags);
list_add_rcu(&pool->node, &dev->dma_io_tlb_pools);
spin_unlock_irqrestore(&dev->dma_io_tlb_lock, flags);
inc_transient_used(mem, pool->nslabs);
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
found:
swiotlb: fix the check whether a device has used software IO TLB When CONFIG_SWIOTLB_DYNAMIC=y, devices which do not use the software IO TLB can avoid swiotlb lookup. A flag is added by commit 1395706a1490 ("swiotlb: search the software IO TLB only if the device makes use of it"), the flag is correctly set, but it is then never checked. Add the actual check here. Note that this code is an alternative to the default pool check, not an additional check, because: 1. swiotlb_find_pool() also searches the default pool; 2. if dma_uses_io_tlb is false, the default swiotlb pool is not used. Tested in a KVM guest against a QEMU RAM-backed SATA disk over virtio and *not* using software IO TLB, this patch increases IOPS by approx 2% for 4-way parallel I/O. The write memory barrier in swiotlb_dyn_alloc() is not needed, because a newly allocated pool must always be observed by swiotlb_find_slots() before an address from that pool is passed to is_swiotlb_buffer(). Correctness was verified using the following litmus test: C swiotlb-new-pool (* * Result: Never * * Check that a newly allocated pool is always visible when the * corresponding swiotlb buffer is visible. *) { mem_pools = default; } P0(int **mem_pools, int *pool) { /* add_mem_pool() */ WRITE_ONCE(*pool, 999); rcu_assign_pointer(*mem_pools, pool); } P1(int **mem_pools, int *flag, int *buf) { /* swiotlb_find_slots() */ int *r0; int r1; rcu_read_lock(); r0 = READ_ONCE(*mem_pools); r1 = READ_ONCE(*r0); rcu_read_unlock(); if (r1) { WRITE_ONCE(*flag, 1); smp_mb(); } /* device driver (presumed) */ WRITE_ONCE(*buf, r1); } P2(int **mem_pools, int *flag, int *buf) { /* device driver (presumed) */ int r0 = READ_ONCE(*buf); /* is_swiotlb_buffer() */ int r1; int *r2; int r3; smp_rmb(); r1 = READ_ONCE(*flag); if (r1) { /* swiotlb_find_pool() */ rcu_read_lock(); r2 = READ_ONCE(*mem_pools); r3 = READ_ONCE(*r2); rcu_read_unlock(); } } exists (2:r0<>0 /\ 2:r3=0) (* Not found. *) Fixes: 1395706a1490 ("swiotlb: search the software IO TLB only if the device makes use of it") Reported-by: Jonathan Corbet <corbet@lwn.net> Closes: https://lore.kernel.org/linux-iommu/87a5uz3ob8.fsf@meer.lwn.net/ Signed-off-by: Petr Tesarik <petr@tesarici.cz> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-09-26 18:55:56 +00:00
WRITE_ONCE(dev->dma_uses_io_tlb, true);
/*
* The general barrier orders reads and writes against a presumed store
* of the SWIOTLB buffer address by a device driver (to a driver private
* data structure). It serves two purposes.
*
* First, the store to dev->dma_uses_io_tlb must be ordered before the
* presumed store. This guarantees that the returned buffer address
* cannot be passed to another CPU before updating dev->dma_uses_io_tlb.
*
* Second, the load from mem->pools must be ordered before the same
* presumed store. This guarantees that the returned buffer address
* cannot be observed by another CPU before an update of the RCU list
* that was made by swiotlb_dyn_alloc() on a third CPU (cf. multicopy
* atomicity).
*
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
* See also the comment in swiotlb_find_pool().
swiotlb: fix the check whether a device has used software IO TLB When CONFIG_SWIOTLB_DYNAMIC=y, devices which do not use the software IO TLB can avoid swiotlb lookup. A flag is added by commit 1395706a1490 ("swiotlb: search the software IO TLB only if the device makes use of it"), the flag is correctly set, but it is then never checked. Add the actual check here. Note that this code is an alternative to the default pool check, not an additional check, because: 1. swiotlb_find_pool() also searches the default pool; 2. if dma_uses_io_tlb is false, the default swiotlb pool is not used. Tested in a KVM guest against a QEMU RAM-backed SATA disk over virtio and *not* using software IO TLB, this patch increases IOPS by approx 2% for 4-way parallel I/O. The write memory barrier in swiotlb_dyn_alloc() is not needed, because a newly allocated pool must always be observed by swiotlb_find_slots() before an address from that pool is passed to is_swiotlb_buffer(). Correctness was verified using the following litmus test: C swiotlb-new-pool (* * Result: Never * * Check that a newly allocated pool is always visible when the * corresponding swiotlb buffer is visible. *) { mem_pools = default; } P0(int **mem_pools, int *pool) { /* add_mem_pool() */ WRITE_ONCE(*pool, 999); rcu_assign_pointer(*mem_pools, pool); } P1(int **mem_pools, int *flag, int *buf) { /* swiotlb_find_slots() */ int *r0; int r1; rcu_read_lock(); r0 = READ_ONCE(*mem_pools); r1 = READ_ONCE(*r0); rcu_read_unlock(); if (r1) { WRITE_ONCE(*flag, 1); smp_mb(); } /* device driver (presumed) */ WRITE_ONCE(*buf, r1); } P2(int **mem_pools, int *flag, int *buf) { /* device driver (presumed) */ int r0 = READ_ONCE(*buf); /* is_swiotlb_buffer() */ int r1; int *r2; int r3; smp_rmb(); r1 = READ_ONCE(*flag); if (r1) { /* swiotlb_find_pool() */ rcu_read_lock(); r2 = READ_ONCE(*mem_pools); r3 = READ_ONCE(*r2); rcu_read_unlock(); } } exists (2:r0<>0 /\ 2:r3=0) (* Not found. *) Fixes: 1395706a1490 ("swiotlb: search the software IO TLB only if the device makes use of it") Reported-by: Jonathan Corbet <corbet@lwn.net> Closes: https://lore.kernel.org/linux-iommu/87a5uz3ob8.fsf@meer.lwn.net/ Signed-off-by: Petr Tesarik <petr@tesarici.cz> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-09-26 18:55:56 +00:00
*/
smp_mb();
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
*retpool = pool;
return index;
}
#else /* !CONFIG_SWIOTLB_DYNAMIC */
static int swiotlb_find_slots(struct device *dev, phys_addr_t orig_addr,
size_t alloc_size, unsigned int alloc_align_mask,
struct io_tlb_pool **retpool)
{
swiotlb: reduce area lock contention for non-primary IO TLB pools If multiple areas and multiple IO TLB pools exist, first iterate the current CPU specific area in all pools. Then move to the next area index. This is best illustrated by a diagram: area 0 | area 1 | ... | area M | pool 0 A B C pool 1 D E ... pool N F G H Currently, each pool is searched before moving on to the next pool, i.e. the search order is A, B ... C, D, E ... F, G ... H. With this patch, each area is searched in all pools before moving on to the next area, i.e. the search order is A, D ... F, B, E ... G ... C ... H. Note that preemption is not disabled, and raw_smp_processor_id() may not return a stable result, but it is called only once to determine the initial area index. The search will iterate over all areas eventually, even if the current task is preempted. Next, some pools may have less (but not more) areas than default_nareas. Skip such pools if the distance from the initial area index is greater than pool->nareas. This logic ensures that for every pool the search starts in the initial CPU's own area and never tries any area twice. To verify performance impact, I booted the kernel with a minimum pool size ("swiotlb=512,4,force"), so multiple pools get allocated, and I ran these benchmarks: - small: single-threaded I/O of 4 KiB blocks, - big: single-threaded I/O of 64 KiB blocks, - 4way: 4-way parallel I/O of 4 KiB blocks. The "var" column in the tables below is the coefficient of variance over 5 runs of the test, the "diff" column is the relative difference against base in read-write I/O bandwidth (MiB/s). Tested on an x86 VM against a QEMU virtio SATA driver backed by a RAM-based block device on the host: base patched var var diff small 0.69% 0.62% +25.4% big 2.14% 2.27% +25.7% 4way 2.65% 1.70% +23.6% Tested on a Raspberry Pi against a class-10 A1 microSD card: base patched var var diff small 0.53% 1.96% -0.3% big 0.02% 0.57% +0.8% 4way 6.17% 0.40% +0.3% These results confirm that there is significant performance boost in the software IO TLB slot allocation itself. Where performance is dominated by actual hardware, there is no measurable change. Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-12-01 12:13:52 +00:00
struct io_tlb_pool *pool;
int start, i;
int index;
*retpool = pool = &dev->dma_io_tlb_mem->defpool;
i = start = raw_smp_processor_id() & (pool->nareas - 1);
do {
index = swiotlb_search_pool_area(dev, pool, i, orig_addr,
alloc_size, alloc_align_mask);
if (index >= 0)
return index;
if (++i >= pool->nareas)
i = 0;
} while (i != start);
return -1;
}
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
#endif /* CONFIG_SWIOTLB_DYNAMIC */
#ifdef CONFIG_DEBUG_FS
/**
* mem_used() - get number of used slots in an allocator
* @mem: Software IO TLB allocator.
*
* The result is accurate in this version of the function, because an atomic
* counter is available if CONFIG_DEBUG_FS is set.
*
* Return: Number of used slots.
*/
static unsigned long mem_used(struct io_tlb_mem *mem)
{
return atomic_long_read(&mem->total_used);
}
#else /* !CONFIG_DEBUG_FS */
/**
* mem_pool_used() - get number of used slots in a memory pool
* @pool: Software IO TLB memory pool.
*
* The result is not accurate, see mem_used().
*
* Return: Approximate number of used slots.
*/
static unsigned long mem_pool_used(struct io_tlb_pool *pool)
{
int i;
unsigned long used = 0;
for (i = 0; i < pool->nareas; i++)
used += pool->areas[i].used;
return used;
}
/**
* mem_used() - get number of used slots in an allocator
* @mem: Software IO TLB allocator.
*
* The result is not accurate, because there is no locking of individual
* areas.
*
* Return: Approximate number of used slots.
*/
static unsigned long mem_used(struct io_tlb_mem *mem)
{
#ifdef CONFIG_SWIOTLB_DYNAMIC
struct io_tlb_pool *pool;
unsigned long used = 0;
rcu_read_lock();
list_for_each_entry_rcu(pool, &mem->pools, node)
used += mem_pool_used(pool);
rcu_read_unlock();
return used;
#else
return mem_pool_used(&mem->defpool);
#endif
}
#endif /* CONFIG_DEBUG_FS */
swiotlb: remove alloc_size argument to swiotlb_tbl_map_single() Currently swiotlb_tbl_map_single() takes alloc_align_mask and alloc_size arguments to specify an swiotlb allocation that is larger than mapping_size. This larger allocation is used solely by iommu_dma_map_single() to handle untrusted devices that should not have DMA visibility to memory pages that are partially used for unrelated kernel data. Having two arguments to specify the allocation is redundant. While alloc_align_mask naturally specifies the alignment of the starting address of the allocation, it can also implicitly specify the size by rounding up the mapping_size to that alignment. Additionally, the current approach has an edge case bug. iommu_dma_map_page() already does the rounding up to compute the alloc_size argument. But swiotlb_tbl_map_single() then calculates the alignment offset based on the DMA min_align_mask, and adds that offset to alloc_size. If the offset is non-zero, the addition may result in a value that is larger than the max the swiotlb can allocate. If the rounding up is done _after_ the alignment offset is added to the mapping_size (and the original mapping_size conforms to the value returned by swiotlb_max_mapping_size), then the max that the swiotlb can allocate will not be exceeded. In view of these issues, simplify the swiotlb_tbl_map_single() interface by removing the alloc_size argument. Most call sites pass the same value for mapping_size and alloc_size, and they pass alloc_align_mask as zero. Just remove the redundant argument from these callers, as they will see no functional change. For iommu_dma_map_page() also remove the alloc_size argument, and have swiotlb_tbl_map_single() compute the alloc_size by rounding up mapping_size after adding the offset based on min_align_mask. This has the side effect of fixing the edge case bug but with no other functional change. Also add a sanity test on the alloc_align_mask. While IOMMU code currently ensures the granule is not larger than PAGE_SIZE, if that guarantee were to be removed in the future, the downstream effect on the swiotlb might go unnoticed until strange allocation failures occurred. Tested on an ARM64 system with 16K page size and some kernel test-only hackery to allow modifying the DMA min_align_mask and the granule size that becomes the alloc_align_mask. Tested these combinations with a variety of original memory addresses and sizes, including those that reproduce the edge case bug: * 4K granule and 0 min_align_mask * 4K granule and 0xFFF min_align_mask (4K - 1) * 16K granule and 0xFFF min_align_mask * 64K granule and 0xFFF min_align_mask * 64K granule and 0x3FFF min_align_mask (16K - 1) With the changes, all combinations pass. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-04-08 04:11:41 +00:00
/**
* swiotlb_tbl_map_single() - bounce buffer map a single contiguous physical area
* @dev: Device which maps the buffer.
* @orig_addr: Original (non-bounced) physical IO buffer address
* @mapping_size: Requested size of the actual bounce buffer, excluding
* any pre- or post-padding for alignment
* @alloc_align_mask: Required start and end alignment of the allocated buffer
* @dir: DMA direction
* @attrs: Optional DMA attributes for the map operation
*
* Find and allocate a suitable sequence of IO TLB slots for the request.
* The allocated space starts at an alignment specified by alloc_align_mask,
* and the size of the allocated space is rounded up so that the total amount
* of allocated space is a multiple of (alloc_align_mask + 1). If
* alloc_align_mask is zero, the allocated space may be at any alignment and
* the size is not rounded up.
*
* The returned address is within the allocated space and matches the bits
* of orig_addr that are specified in the DMA min_align_mask for the device. As
* such, this returned address may be offset from the beginning of the allocated
* space. The bounce buffer space starting at the returned address for
* mapping_size bytes is initialized to the contents of the original IO buffer
* area. Any pre-padding (due to an offset) and any post-padding (due to
* rounding-up the size) is not initialized.
*/
phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr,
swiotlb: remove alloc_size argument to swiotlb_tbl_map_single() Currently swiotlb_tbl_map_single() takes alloc_align_mask and alloc_size arguments to specify an swiotlb allocation that is larger than mapping_size. This larger allocation is used solely by iommu_dma_map_single() to handle untrusted devices that should not have DMA visibility to memory pages that are partially used for unrelated kernel data. Having two arguments to specify the allocation is redundant. While alloc_align_mask naturally specifies the alignment of the starting address of the allocation, it can also implicitly specify the size by rounding up the mapping_size to that alignment. Additionally, the current approach has an edge case bug. iommu_dma_map_page() already does the rounding up to compute the alloc_size argument. But swiotlb_tbl_map_single() then calculates the alignment offset based on the DMA min_align_mask, and adds that offset to alloc_size. If the offset is non-zero, the addition may result in a value that is larger than the max the swiotlb can allocate. If the rounding up is done _after_ the alignment offset is added to the mapping_size (and the original mapping_size conforms to the value returned by swiotlb_max_mapping_size), then the max that the swiotlb can allocate will not be exceeded. In view of these issues, simplify the swiotlb_tbl_map_single() interface by removing the alloc_size argument. Most call sites pass the same value for mapping_size and alloc_size, and they pass alloc_align_mask as zero. Just remove the redundant argument from these callers, as they will see no functional change. For iommu_dma_map_page() also remove the alloc_size argument, and have swiotlb_tbl_map_single() compute the alloc_size by rounding up mapping_size after adding the offset based on min_align_mask. This has the side effect of fixing the edge case bug but with no other functional change. Also add a sanity test on the alloc_align_mask. While IOMMU code currently ensures the granule is not larger than PAGE_SIZE, if that guarantee were to be removed in the future, the downstream effect on the swiotlb might go unnoticed until strange allocation failures occurred. Tested on an ARM64 system with 16K page size and some kernel test-only hackery to allow modifying the DMA min_align_mask and the granule size that becomes the alloc_align_mask. Tested these combinations with a variety of original memory addresses and sizes, including those that reproduce the edge case bug: * 4K granule and 0 min_align_mask * 4K granule and 0xFFF min_align_mask (4K - 1) * 16K granule and 0xFFF min_align_mask * 64K granule and 0xFFF min_align_mask * 64K granule and 0x3FFF min_align_mask (16K - 1) With the changes, all combinations pass. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-04-08 04:11:41 +00:00
size_t mapping_size, unsigned int alloc_align_mask,
enum dma_data_direction dir, unsigned long attrs)
{
struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary Allow a buffer pre-padding of up to alloc_align_mask, even if it requires allocating additional IO TLB slots. If the allocation alignment is bigger than IO_TLB_SIZE and min_align_mask covers any non-zero bits in the original address between IO_TLB_SIZE and alloc_align_mask, these bits are not preserved in the swiotlb buffer address. To fix this case, increase the allocation size and use a larger offset within the allocated buffer. As a result, extra padding slots may be allocated before the mapping start address. Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR. These slots do not correspond to any CPU buffer, so attempts to sync the data should be ignored. The padding slots should be automatically released when the buffer is unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the DMA buffer slot, not the first padding slot. Save the number of padding slots in struct io_tlb_slot and use it to adjust the slot index in swiotlb_release_slots(), so all allocated slots are properly freed. Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present") Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/ Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-25 08:31:04 +00:00
unsigned int offset;
struct io_tlb_pool *pool;
unsigned int i;
swiotlb: remove alloc_size argument to swiotlb_tbl_map_single() Currently swiotlb_tbl_map_single() takes alloc_align_mask and alloc_size arguments to specify an swiotlb allocation that is larger than mapping_size. This larger allocation is used solely by iommu_dma_map_single() to handle untrusted devices that should not have DMA visibility to memory pages that are partially used for unrelated kernel data. Having two arguments to specify the allocation is redundant. While alloc_align_mask naturally specifies the alignment of the starting address of the allocation, it can also implicitly specify the size by rounding up the mapping_size to that alignment. Additionally, the current approach has an edge case bug. iommu_dma_map_page() already does the rounding up to compute the alloc_size argument. But swiotlb_tbl_map_single() then calculates the alignment offset based on the DMA min_align_mask, and adds that offset to alloc_size. If the offset is non-zero, the addition may result in a value that is larger than the max the swiotlb can allocate. If the rounding up is done _after_ the alignment offset is added to the mapping_size (and the original mapping_size conforms to the value returned by swiotlb_max_mapping_size), then the max that the swiotlb can allocate will not be exceeded. In view of these issues, simplify the swiotlb_tbl_map_single() interface by removing the alloc_size argument. Most call sites pass the same value for mapping_size and alloc_size, and they pass alloc_align_mask as zero. Just remove the redundant argument from these callers, as they will see no functional change. For iommu_dma_map_page() also remove the alloc_size argument, and have swiotlb_tbl_map_single() compute the alloc_size by rounding up mapping_size after adding the offset based on min_align_mask. This has the side effect of fixing the edge case bug but with no other functional change. Also add a sanity test on the alloc_align_mask. While IOMMU code currently ensures the granule is not larger than PAGE_SIZE, if that guarantee were to be removed in the future, the downstream effect on the swiotlb might go unnoticed until strange allocation failures occurred. Tested on an ARM64 system with 16K page size and some kernel test-only hackery to allow modifying the DMA min_align_mask and the granule size that becomes the alloc_align_mask. Tested these combinations with a variety of original memory addresses and sizes, including those that reproduce the edge case bug: * 4K granule and 0 min_align_mask * 4K granule and 0xFFF min_align_mask (4K - 1) * 16K granule and 0xFFF min_align_mask * 64K granule and 0xFFF min_align_mask * 64K granule and 0x3FFF min_align_mask (16K - 1) With the changes, all combinations pass. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-04-08 04:11:41 +00:00
size_t size;
int index;
phys_addr_t tlb_addr;
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary Allow a buffer pre-padding of up to alloc_align_mask, even if it requires allocating additional IO TLB slots. If the allocation alignment is bigger than IO_TLB_SIZE and min_align_mask covers any non-zero bits in the original address between IO_TLB_SIZE and alloc_align_mask, these bits are not preserved in the swiotlb buffer address. To fix this case, increase the allocation size and use a larger offset within the allocated buffer. As a result, extra padding slots may be allocated before the mapping start address. Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR. These slots do not correspond to any CPU buffer, so attempts to sync the data should be ignored. The padding slots should be automatically released when the buffer is unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the DMA buffer slot, not the first padding slot. Save the number of padding slots in struct io_tlb_slot and use it to adjust the slot index in swiotlb_release_slots(), so all allocated slots are properly freed. Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present") Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/ Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-25 08:31:04 +00:00
unsigned short pad_slots;
swiotlb: don't panic! The panics in swiotlb are relics of a bygone era, some of them inadvertently inherited from a memblock refactor, and all of them unnecessary since they are in places that may also fail gracefully anyway. Convert the panics in swiotlb_init_remap() into non-fatal warnings more consistent with the other bail-out paths there and in swiotlb_init_late() (but don't bother trying to roll anything back, since if anything does actually fail that early, the aim is merely to keep going as far as possible to get more diagnostic information out of the inevitably-dying kernel). It's not for SWIOTLB to decide that the system is terminally compromised just because there *might* turn out to be one or more 32-bit devices that might want to make streaming DMA mappings, especially since we already handle the no-buffer case later if it turns out someone did want it. Similarly though, downgrade that panic in swiotlb_tbl_map_single(), since even if we do get to that point it's an overly extreme reaction. It makes little difference to the DMA API caller whether a mapping fails because the buffer is full or because there is no buffer, and once again it's not for SWIOTLB to presume that any particular DMA mapping is so fundamental to the operation of the system that it must be terminal if it could never succeed. Even if the caller handles failure by futilely retrying forever, a single stuck thread is considerably less impactful to the user than a needless panic. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-09-07 13:38:33 +00:00
if (!mem || !mem->nslabs) {
dev_warn_ratelimited(dev,
"Can not allocate SWIOTLB buffer earlier and can't now provide you with the DMA bounce buffer");
return (phys_addr_t)DMA_MAPPING_ERROR;
}
if (cc_platform_has(CC_ATTR_MEM_ENCRYPT))
pr_warn_once("Memory encryption is active and system is using DMA bounce buffers\n");
swiotlb: remove alloc_size argument to swiotlb_tbl_map_single() Currently swiotlb_tbl_map_single() takes alloc_align_mask and alloc_size arguments to specify an swiotlb allocation that is larger than mapping_size. This larger allocation is used solely by iommu_dma_map_single() to handle untrusted devices that should not have DMA visibility to memory pages that are partially used for unrelated kernel data. Having two arguments to specify the allocation is redundant. While alloc_align_mask naturally specifies the alignment of the starting address of the allocation, it can also implicitly specify the size by rounding up the mapping_size to that alignment. Additionally, the current approach has an edge case bug. iommu_dma_map_page() already does the rounding up to compute the alloc_size argument. But swiotlb_tbl_map_single() then calculates the alignment offset based on the DMA min_align_mask, and adds that offset to alloc_size. If the offset is non-zero, the addition may result in a value that is larger than the max the swiotlb can allocate. If the rounding up is done _after_ the alignment offset is added to the mapping_size (and the original mapping_size conforms to the value returned by swiotlb_max_mapping_size), then the max that the swiotlb can allocate will not be exceeded. In view of these issues, simplify the swiotlb_tbl_map_single() interface by removing the alloc_size argument. Most call sites pass the same value for mapping_size and alloc_size, and they pass alloc_align_mask as zero. Just remove the redundant argument from these callers, as they will see no functional change. For iommu_dma_map_page() also remove the alloc_size argument, and have swiotlb_tbl_map_single() compute the alloc_size by rounding up mapping_size after adding the offset based on min_align_mask. This has the side effect of fixing the edge case bug but with no other functional change. Also add a sanity test on the alloc_align_mask. While IOMMU code currently ensures the granule is not larger than PAGE_SIZE, if that guarantee were to be removed in the future, the downstream effect on the swiotlb might go unnoticed until strange allocation failures occurred. Tested on an ARM64 system with 16K page size and some kernel test-only hackery to allow modifying the DMA min_align_mask and the granule size that becomes the alloc_align_mask. Tested these combinations with a variety of original memory addresses and sizes, including those that reproduce the edge case bug: * 4K granule and 0 min_align_mask * 4K granule and 0xFFF min_align_mask (4K - 1) * 16K granule and 0xFFF min_align_mask * 64K granule and 0xFFF min_align_mask * 64K granule and 0x3FFF min_align_mask (16K - 1) With the changes, all combinations pass. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-04-08 04:11:41 +00:00
/*
* The default swiotlb memory pool is allocated with PAGE_SIZE
* alignment. If a mapping is requested with larger alignment,
* the mapping may be unable to use the initial slot(s) in all
* sets of IO_TLB_SEGSIZE slots. In such case, a mapping request
* of or near the maximum mapping size would always fail.
*/
dev_WARN_ONCE(dev, alloc_align_mask > ~PAGE_MASK,
"Alloc alignment may prevent fulfilling requests with max mapping_size\n");
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary Allow a buffer pre-padding of up to alloc_align_mask, even if it requires allocating additional IO TLB slots. If the allocation alignment is bigger than IO_TLB_SIZE and min_align_mask covers any non-zero bits in the original address between IO_TLB_SIZE and alloc_align_mask, these bits are not preserved in the swiotlb buffer address. To fix this case, increase the allocation size and use a larger offset within the allocated buffer. As a result, extra padding slots may be allocated before the mapping start address. Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR. These slots do not correspond to any CPU buffer, so attempts to sync the data should be ignored. The padding slots should be automatically released when the buffer is unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the DMA buffer slot, not the first padding slot. Save the number of padding slots in struct io_tlb_slot and use it to adjust the slot index in swiotlb_release_slots(), so all allocated slots are properly freed. Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present") Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/ Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-25 08:31:04 +00:00
offset = swiotlb_align_offset(dev, alloc_align_mask, orig_addr);
swiotlb: remove alloc_size argument to swiotlb_tbl_map_single() Currently swiotlb_tbl_map_single() takes alloc_align_mask and alloc_size arguments to specify an swiotlb allocation that is larger than mapping_size. This larger allocation is used solely by iommu_dma_map_single() to handle untrusted devices that should not have DMA visibility to memory pages that are partially used for unrelated kernel data. Having two arguments to specify the allocation is redundant. While alloc_align_mask naturally specifies the alignment of the starting address of the allocation, it can also implicitly specify the size by rounding up the mapping_size to that alignment. Additionally, the current approach has an edge case bug. iommu_dma_map_page() already does the rounding up to compute the alloc_size argument. But swiotlb_tbl_map_single() then calculates the alignment offset based on the DMA min_align_mask, and adds that offset to alloc_size. If the offset is non-zero, the addition may result in a value that is larger than the max the swiotlb can allocate. If the rounding up is done _after_ the alignment offset is added to the mapping_size (and the original mapping_size conforms to the value returned by swiotlb_max_mapping_size), then the max that the swiotlb can allocate will not be exceeded. In view of these issues, simplify the swiotlb_tbl_map_single() interface by removing the alloc_size argument. Most call sites pass the same value for mapping_size and alloc_size, and they pass alloc_align_mask as zero. Just remove the redundant argument from these callers, as they will see no functional change. For iommu_dma_map_page() also remove the alloc_size argument, and have swiotlb_tbl_map_single() compute the alloc_size by rounding up mapping_size after adding the offset based on min_align_mask. This has the side effect of fixing the edge case bug but with no other functional change. Also add a sanity test on the alloc_align_mask. While IOMMU code currently ensures the granule is not larger than PAGE_SIZE, if that guarantee were to be removed in the future, the downstream effect on the swiotlb might go unnoticed until strange allocation failures occurred. Tested on an ARM64 system with 16K page size and some kernel test-only hackery to allow modifying the DMA min_align_mask and the granule size that becomes the alloc_align_mask. Tested these combinations with a variety of original memory addresses and sizes, including those that reproduce the edge case bug: * 4K granule and 0 min_align_mask * 4K granule and 0xFFF min_align_mask (4K - 1) * 16K granule and 0xFFF min_align_mask * 64K granule and 0xFFF min_align_mask * 64K granule and 0x3FFF min_align_mask (16K - 1) With the changes, all combinations pass. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-04-08 04:11:41 +00:00
size = ALIGN(mapping_size + offset, alloc_align_mask + 1);
index = swiotlb_find_slots(dev, orig_addr, size, alloc_align_mask, &pool);
if (index == -1) {
if (!(attrs & DMA_ATTR_NO_WARN))
dev_warn_ratelimited(dev,
"swiotlb buffer is full (sz: %zd bytes), total %lu (slots), used %lu (slots)\n",
swiotlb: remove alloc_size argument to swiotlb_tbl_map_single() Currently swiotlb_tbl_map_single() takes alloc_align_mask and alloc_size arguments to specify an swiotlb allocation that is larger than mapping_size. This larger allocation is used solely by iommu_dma_map_single() to handle untrusted devices that should not have DMA visibility to memory pages that are partially used for unrelated kernel data. Having two arguments to specify the allocation is redundant. While alloc_align_mask naturally specifies the alignment of the starting address of the allocation, it can also implicitly specify the size by rounding up the mapping_size to that alignment. Additionally, the current approach has an edge case bug. iommu_dma_map_page() already does the rounding up to compute the alloc_size argument. But swiotlb_tbl_map_single() then calculates the alignment offset based on the DMA min_align_mask, and adds that offset to alloc_size. If the offset is non-zero, the addition may result in a value that is larger than the max the swiotlb can allocate. If the rounding up is done _after_ the alignment offset is added to the mapping_size (and the original mapping_size conforms to the value returned by swiotlb_max_mapping_size), then the max that the swiotlb can allocate will not be exceeded. In view of these issues, simplify the swiotlb_tbl_map_single() interface by removing the alloc_size argument. Most call sites pass the same value for mapping_size and alloc_size, and they pass alloc_align_mask as zero. Just remove the redundant argument from these callers, as they will see no functional change. For iommu_dma_map_page() also remove the alloc_size argument, and have swiotlb_tbl_map_single() compute the alloc_size by rounding up mapping_size after adding the offset based on min_align_mask. This has the side effect of fixing the edge case bug but with no other functional change. Also add a sanity test on the alloc_align_mask. While IOMMU code currently ensures the granule is not larger than PAGE_SIZE, if that guarantee were to be removed in the future, the downstream effect on the swiotlb might go unnoticed until strange allocation failures occurred. Tested on an ARM64 system with 16K page size and some kernel test-only hackery to allow modifying the DMA min_align_mask and the granule size that becomes the alloc_align_mask. Tested these combinations with a variety of original memory addresses and sizes, including those that reproduce the edge case bug: * 4K granule and 0 min_align_mask * 4K granule and 0xFFF min_align_mask (4K - 1) * 16K granule and 0xFFF min_align_mask * 64K granule and 0xFFF min_align_mask * 64K granule and 0x3FFF min_align_mask (16K - 1) With the changes, all combinations pass. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-04-08 04:11:41 +00:00
size, mem->nslabs, mem_used(mem));
return (phys_addr_t)DMA_MAPPING_ERROR;
}
/*
* If dma_skip_sync was set, reset it on first SWIOTLB buffer
* mapping to always sync SWIOTLB buffers.
*/
dma_reset_need_sync(dev);
/*
* Save away the mapping from the original address to the DMA address.
* This is needed when we sync the memory. Then we sync the buffer if
* needed.
*/
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary Allow a buffer pre-padding of up to alloc_align_mask, even if it requires allocating additional IO TLB slots. If the allocation alignment is bigger than IO_TLB_SIZE and min_align_mask covers any non-zero bits in the original address between IO_TLB_SIZE and alloc_align_mask, these bits are not preserved in the swiotlb buffer address. To fix this case, increase the allocation size and use a larger offset within the allocated buffer. As a result, extra padding slots may be allocated before the mapping start address. Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR. These slots do not correspond to any CPU buffer, so attempts to sync the data should be ignored. The padding slots should be automatically released when the buffer is unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the DMA buffer slot, not the first padding slot. Save the number of padding slots in struct io_tlb_slot and use it to adjust the slot index in swiotlb_release_slots(), so all allocated slots are properly freed. Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present") Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/ Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-25 08:31:04 +00:00
pad_slots = offset >> IO_TLB_SHIFT;
offset &= (IO_TLB_SIZE - 1);
index += pad_slots;
pool->slots[index].pad_slots = pad_slots;
swiotlb: remove alloc_size argument to swiotlb_tbl_map_single() Currently swiotlb_tbl_map_single() takes alloc_align_mask and alloc_size arguments to specify an swiotlb allocation that is larger than mapping_size. This larger allocation is used solely by iommu_dma_map_single() to handle untrusted devices that should not have DMA visibility to memory pages that are partially used for unrelated kernel data. Having two arguments to specify the allocation is redundant. While alloc_align_mask naturally specifies the alignment of the starting address of the allocation, it can also implicitly specify the size by rounding up the mapping_size to that alignment. Additionally, the current approach has an edge case bug. iommu_dma_map_page() already does the rounding up to compute the alloc_size argument. But swiotlb_tbl_map_single() then calculates the alignment offset based on the DMA min_align_mask, and adds that offset to alloc_size. If the offset is non-zero, the addition may result in a value that is larger than the max the swiotlb can allocate. If the rounding up is done _after_ the alignment offset is added to the mapping_size (and the original mapping_size conforms to the value returned by swiotlb_max_mapping_size), then the max that the swiotlb can allocate will not be exceeded. In view of these issues, simplify the swiotlb_tbl_map_single() interface by removing the alloc_size argument. Most call sites pass the same value for mapping_size and alloc_size, and they pass alloc_align_mask as zero. Just remove the redundant argument from these callers, as they will see no functional change. For iommu_dma_map_page() also remove the alloc_size argument, and have swiotlb_tbl_map_single() compute the alloc_size by rounding up mapping_size after adding the offset based on min_align_mask. This has the side effect of fixing the edge case bug but with no other functional change. Also add a sanity test on the alloc_align_mask. While IOMMU code currently ensures the granule is not larger than PAGE_SIZE, if that guarantee were to be removed in the future, the downstream effect on the swiotlb might go unnoticed until strange allocation failures occurred. Tested on an ARM64 system with 16K page size and some kernel test-only hackery to allow modifying the DMA min_align_mask and the granule size that becomes the alloc_align_mask. Tested these combinations with a variety of original memory addresses and sizes, including those that reproduce the edge case bug: * 4K granule and 0 min_align_mask * 4K granule and 0xFFF min_align_mask (4K - 1) * 16K granule and 0xFFF min_align_mask * 64K granule and 0xFFF min_align_mask * 64K granule and 0x3FFF min_align_mask (16K - 1) With the changes, all combinations pass. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-04-08 04:11:41 +00:00
for (i = 0; i < (nr_slots(size) - pad_slots); i++)
pool->slots[index + i].orig_addr = slot_addr(orig_addr, i);
tlb_addr = slot_addr(pool->start, index) + offset;
/*
swiotlb: rewrite comment explaining why the source is preserved on DMA_FROM_DEVICE Rewrite the comment explaining why swiotlb copies the original buffer to the TLB buffer before initiating DMA *from* the device, i.e. before the device DMAs into the TLB buffer. The existing comment's argument that preserving the original data can prevent a kernel memory leak is bogus. If the driver that triggered the mapping _knows_ that the device will overwrite the entire mapping, or the driver will consume only the written parts, then copying from the original memory is completely pointless. If neither of the above holds true, then copying from the original adds value only if preserving the data is necessary for functional correctness, or the driver explicitly initialized the original memory. If the driver didn't initialize the memory, then copying the original buffer to the TLB buffer simply changes what kernel data is leaked to user space. Writing the entire TLB buffer _does_ prevent leaking stale TLB buffer data from a previous bounce, but that can be achieved by simply zeroing the TLB buffer when grabbing a slot. The real reason swiotlb ended up initializing the TLB buffer with the original buffer is that it's necessary to make swiotlb operate as transparently as possible, i.e. to behave as closely as possible to hardware, and to avoid corrupting the original buffer, e.g. if the driver knows the device will do partial writes and is relying on the unwritten data to be preserved. Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/all/ZN5elYQ5szQndN8n@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-10-20 15:42:15 +00:00
* When the device is writing memory, i.e. dir == DMA_FROM_DEVICE, copy
* the original buffer to the TLB buffer before initiating DMA in order
* to preserve the original's data if the device does a partial write,
* i.e. if the device doesn't overwrite the entire buffer. Preserving
* the original data, even if it's garbage, is necessary to match
* hardware behavior. Use of swiotlb is supposed to be transparent,
* i.e. swiotlb must not corrupt memory by clobbering unwritten bytes.
*/
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
swiotlb_bounce(dev, tlb_addr, mapping_size, DMA_TO_DEVICE, pool);
return tlb_addr;
}
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
static void swiotlb_release_slots(struct device *dev, phys_addr_t tlb_addr,
struct io_tlb_pool *mem)
{
unsigned long flags;
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary Allow a buffer pre-padding of up to alloc_align_mask, even if it requires allocating additional IO TLB slots. If the allocation alignment is bigger than IO_TLB_SIZE and min_align_mask covers any non-zero bits in the original address between IO_TLB_SIZE and alloc_align_mask, these bits are not preserved in the swiotlb buffer address. To fix this case, increase the allocation size and use a larger offset within the allocated buffer. As a result, extra padding slots may be allocated before the mapping start address. Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR. These slots do not correspond to any CPU buffer, so attempts to sync the data should be ignored. The padding slots should be automatically released when the buffer is unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the DMA buffer slot, not the first padding slot. Save the number of padding slots in struct io_tlb_slot and use it to adjust the slot index in swiotlb_release_slots(), so all allocated slots are properly freed. Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present") Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/ Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-25 08:31:04 +00:00
unsigned int offset = swiotlb_align_offset(dev, 0, tlb_addr);
int index, nslots, aindex;
struct io_tlb_area *area;
int count, i;
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary Allow a buffer pre-padding of up to alloc_align_mask, even if it requires allocating additional IO TLB slots. If the allocation alignment is bigger than IO_TLB_SIZE and min_align_mask covers any non-zero bits in the original address between IO_TLB_SIZE and alloc_align_mask, these bits are not preserved in the swiotlb buffer address. To fix this case, increase the allocation size and use a larger offset within the allocated buffer. As a result, extra padding slots may be allocated before the mapping start address. Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR. These slots do not correspond to any CPU buffer, so attempts to sync the data should be ignored. The padding slots should be automatically released when the buffer is unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the DMA buffer slot, not the first padding slot. Save the number of padding slots in struct io_tlb_slot and use it to adjust the slot index in swiotlb_release_slots(), so all allocated slots are properly freed. Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present") Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/ Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-25 08:31:04 +00:00
index = (tlb_addr - offset - mem->start) >> IO_TLB_SHIFT;
index -= mem->slots[index].pad_slots;
nslots = nr_slots(mem->slots[index].alloc_size + offset);
aindex = index / mem->area_nslabs;
area = &mem->areas[aindex];
/*
* Return the buffer to the free list by setting the corresponding
* entries to indicate the number of contiguous entries available.
* While returning the entries to the free list, we merge the entries
* with slots below and above the pool being returned.
*/
BUG_ON(aindex >= mem->nareas);
spin_lock_irqsave(&area->lock, flags);
if (index + nslots < ALIGN(index + 1, IO_TLB_SEGSIZE))
count = mem->slots[index + nslots].list;
else
count = 0;
/*
* Step 1: return the slots to the free list, merging the slots with
* superceeding slots
*/
for (i = index + nslots - 1; i >= index; i--) {
mem->slots[i].list = ++count;
mem->slots[i].orig_addr = INVALID_PHYS_ADDR;
mem->slots[i].alloc_size = 0;
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary Allow a buffer pre-padding of up to alloc_align_mask, even if it requires allocating additional IO TLB slots. If the allocation alignment is bigger than IO_TLB_SIZE and min_align_mask covers any non-zero bits in the original address between IO_TLB_SIZE and alloc_align_mask, these bits are not preserved in the swiotlb buffer address. To fix this case, increase the allocation size and use a larger offset within the allocated buffer. As a result, extra padding slots may be allocated before the mapping start address. Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR. These slots do not correspond to any CPU buffer, so attempts to sync the data should be ignored. The padding slots should be automatically released when the buffer is unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the DMA buffer slot, not the first padding slot. Save the number of padding slots in struct io_tlb_slot and use it to adjust the slot index in swiotlb_release_slots(), so all allocated slots are properly freed. Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present") Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/ Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-03-25 08:31:04 +00:00
mem->slots[i].pad_slots = 0;
}
/*
* Step 2: merge the returned slots with the preceding slots, if
* available (non zero)
*/
for (i = index - 1;
io_tlb_offset(i) != IO_TLB_SEGSIZE - 1 && mem->slots[i].list;
i--)
mem->slots[i].list = ++count;
area->used -= nslots;
spin_unlock_irqrestore(&area->lock, flags);
dec_used(dev->dma_io_tlb_mem, nslots);
}
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
#ifdef CONFIG_SWIOTLB_DYNAMIC
/**
* swiotlb_del_transient() - delete a transient memory pool
* @dev: Device which mapped the buffer.
* @tlb_addr: Physical address within a bounce buffer.
* @pool: Pointer to the transient memory pool to be checked and deleted.
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
*
* Check whether the address belongs to a transient SWIOTLB memory pool.
* If yes, then delete the pool.
*
* Return: %true if @tlb_addr belonged to a transient pool that was released.
*/
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
static bool swiotlb_del_transient(struct device *dev, phys_addr_t tlb_addr,
struct io_tlb_pool *pool)
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
{
if (!pool->transient)
return false;
dec_used(dev->dma_io_tlb_mem, pool->nslabs);
swiotlb_del_pool(dev, pool);
dec_transient_used(dev->dma_io_tlb_mem, pool->nslabs);
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
return true;
}
#else /* !CONFIG_SWIOTLB_DYNAMIC */
static inline bool swiotlb_del_transient(struct device *dev,
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
phys_addr_t tlb_addr, struct io_tlb_pool *pool)
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
{
return false;
}
#endif /* CONFIG_SWIOTLB_DYNAMIC */
/*
* tlb_addr is the physical address of the bounce buffer to unmap.
*/
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
void __swiotlb_tbl_unmap_single(struct device *dev, phys_addr_t tlb_addr,
size_t mapping_size, enum dma_data_direction dir,
unsigned long attrs, struct io_tlb_pool *pool)
{
/*
* First, sync the memory before unmapping the entry
*/
if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
(dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL))
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
swiotlb_bounce(dev, tlb_addr, mapping_size,
DMA_FROM_DEVICE, pool);
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
if (swiotlb_del_transient(dev, tlb_addr, pool))
swiotlb: if swiotlb is full, fall back to a transient memory pool Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 06:24:01 +00:00
return;
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
swiotlb_release_slots(dev, tlb_addr, pool);
}
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
void __swiotlb_sync_single_for_device(struct device *dev, phys_addr_t tlb_addr,
size_t size, enum dma_data_direction dir,
struct io_tlb_pool *pool)
{
Revert "swiotlb: rework "fix info leak with DMA_FROM_DEVICE"" This reverts commit aa6f8dcbab473f3a3c7454b74caa46d36cdc5d13. It turns out this breaks at least the ath9k wireless driver, and possibly others. What the ath9k driver does on packet receive is to set up the DMA transfer with: int ath_rx_init(..) .. bf->bf_buf_addr = dma_map_single(sc->dev, skb->data, common->rx_bufsize, DMA_FROM_DEVICE); and then the receive logic (through ath_rx_tasklet()) will fetch incoming packets static bool ath_edma_get_buffers(..) .. dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr, common->rx_bufsize, DMA_FROM_DEVICE); ret = ath9k_hw_process_rxdesc_edma(ah, rs, skb->data); if (ret == -EINPROGRESS) { /*let device gain the buffer again*/ dma_sync_single_for_device(sc->dev, bf->bf_buf_addr, common->rx_bufsize, DMA_FROM_DEVICE); return false; } and it's worth noting how that first DMA sync: dma_sync_single_for_cpu(..DMA_FROM_DEVICE); is there to make sure the CPU can read the DMA buffer (possibly by copying it from the bounce buffer area, or by doing some cache flush). The iommu correctly turns that into a "copy from bounce bufer" so that the driver can look at the state of the packets. In the meantime, the device may continue to write to the DMA buffer, but we at least have a snapshot of the state due to that first DMA sync. But that _second_ DMA sync: dma_sync_single_for_device(..DMA_FROM_DEVICE); is telling the DMA mapping that the CPU wasn't interested in the area because the packet wasn't there. In the case of a DMA bounce buffer, that is a no-op. Note how it's not a sync for the CPU (the "for_device()" part), and it's not a sync for data written by the CPU (the "DMA_FROM_DEVICE" part). Or rather, it _should_ be a no-op. That's what commit aa6f8dcbab47 broke: it made the code bounce the buffer unconditionally, and changed the DMA_FROM_DEVICE to just unconditionally and illogically be DMA_TO_DEVICE. [ Side note: purely within the confines of the swiotlb driver it wasn't entirely illogical: The reason it did that odd DMA_FROM_DEVICE -> DMA_TO_DEVICE conversion thing is because inside the swiotlb driver, it uses just a swiotlb_bounce() helper that doesn't care about the whole distinction of who the sync is for - only which direction to bounce. So it took the "sync for device" to mean that the CPU must have been the one writing, and thought it meant DMA_TO_DEVICE. ] Also note how the commentary in that commit was wrong, probably due to that whole confusion, claiming that the commit makes the swiotlb code "bounce unconditionally (that is, also when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale data from the swiotlb buffer" which is nonsensical for two reasons: - that "also when dir == DMA_TO_DEVICE" is nonsensical, as that was exactly when it always did - and should do - the bounce. - since this is a sync for the device (not for the CPU), we're clearly fundamentally not coping back stale data from the bounce buffers at all, because we'd be copying *to* the bounce buffers. So that commit was just very confused. It confused the direction of the synchronization (to the device, not the cpu) with the direction of the DMA (from the device). Reported-and-bisected-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Olha Cherevyk <olha.cherevyk@gmail.com> Cc: Halil Pasic <pasic@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Kalle Valo <kvalo@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Toke Høiland-Jørgensen <toke@toke.dk> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-26 17:42:04 +00:00
if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
swiotlb_bounce(dev, tlb_addr, size, DMA_TO_DEVICE, pool);
Revert "swiotlb: rework "fix info leak with DMA_FROM_DEVICE"" This reverts commit aa6f8dcbab473f3a3c7454b74caa46d36cdc5d13. It turns out this breaks at least the ath9k wireless driver, and possibly others. What the ath9k driver does on packet receive is to set up the DMA transfer with: int ath_rx_init(..) .. bf->bf_buf_addr = dma_map_single(sc->dev, skb->data, common->rx_bufsize, DMA_FROM_DEVICE); and then the receive logic (through ath_rx_tasklet()) will fetch incoming packets static bool ath_edma_get_buffers(..) .. dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr, common->rx_bufsize, DMA_FROM_DEVICE); ret = ath9k_hw_process_rxdesc_edma(ah, rs, skb->data); if (ret == -EINPROGRESS) { /*let device gain the buffer again*/ dma_sync_single_for_device(sc->dev, bf->bf_buf_addr, common->rx_bufsize, DMA_FROM_DEVICE); return false; } and it's worth noting how that first DMA sync: dma_sync_single_for_cpu(..DMA_FROM_DEVICE); is there to make sure the CPU can read the DMA buffer (possibly by copying it from the bounce buffer area, or by doing some cache flush). The iommu correctly turns that into a "copy from bounce bufer" so that the driver can look at the state of the packets. In the meantime, the device may continue to write to the DMA buffer, but we at least have a snapshot of the state due to that first DMA sync. But that _second_ DMA sync: dma_sync_single_for_device(..DMA_FROM_DEVICE); is telling the DMA mapping that the CPU wasn't interested in the area because the packet wasn't there. In the case of a DMA bounce buffer, that is a no-op. Note how it's not a sync for the CPU (the "for_device()" part), and it's not a sync for data written by the CPU (the "DMA_FROM_DEVICE" part). Or rather, it _should_ be a no-op. That's what commit aa6f8dcbab47 broke: it made the code bounce the buffer unconditionally, and changed the DMA_FROM_DEVICE to just unconditionally and illogically be DMA_TO_DEVICE. [ Side note: purely within the confines of the swiotlb driver it wasn't entirely illogical: The reason it did that odd DMA_FROM_DEVICE -> DMA_TO_DEVICE conversion thing is because inside the swiotlb driver, it uses just a swiotlb_bounce() helper that doesn't care about the whole distinction of who the sync is for - only which direction to bounce. So it took the "sync for device" to mean that the CPU must have been the one writing, and thought it meant DMA_TO_DEVICE. ] Also note how the commentary in that commit was wrong, probably due to that whole confusion, claiming that the commit makes the swiotlb code "bounce unconditionally (that is, also when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale data from the swiotlb buffer" which is nonsensical for two reasons: - that "also when dir == DMA_TO_DEVICE" is nonsensical, as that was exactly when it always did - and should do - the bounce. - since this is a sync for the device (not for the CPU), we're clearly fundamentally not coping back stale data from the bounce buffers at all, because we'd be copying *to* the bounce buffers. So that commit was just very confused. It confused the direction of the synchronization (to the device, not the cpu) with the direction of the DMA (from the device). Reported-and-bisected-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Olha Cherevyk <olha.cherevyk@gmail.com> Cc: Halil Pasic <pasic@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Kalle Valo <kvalo@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Toke Høiland-Jørgensen <toke@toke.dk> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-26 17:42:04 +00:00
else
BUG_ON(dir != DMA_FROM_DEVICE);
}
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
void __swiotlb_sync_single_for_cpu(struct device *dev, phys_addr_t tlb_addr,
size_t size, enum dma_data_direction dir,
struct io_tlb_pool *pool)
{
if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL)
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
swiotlb_bounce(dev, tlb_addr, size, DMA_FROM_DEVICE, pool);
else
BUG_ON(dir != DMA_TO_DEVICE);
}
/*
* Create a swiotlb mapping for the buffer at @paddr, and in case of DMAing
* to the device copy the data into it as well.
*/
dma_addr_t swiotlb_map(struct device *dev, phys_addr_t paddr, size_t size,
enum dma_data_direction dir, unsigned long attrs)
{
phys_addr_t swiotlb_addr;
dma_addr_t dma_addr;
trace_swiotlb_bounced(dev, phys_to_dma(dev, paddr), size);
swiotlb: remove alloc_size argument to swiotlb_tbl_map_single() Currently swiotlb_tbl_map_single() takes alloc_align_mask and alloc_size arguments to specify an swiotlb allocation that is larger than mapping_size. This larger allocation is used solely by iommu_dma_map_single() to handle untrusted devices that should not have DMA visibility to memory pages that are partially used for unrelated kernel data. Having two arguments to specify the allocation is redundant. While alloc_align_mask naturally specifies the alignment of the starting address of the allocation, it can also implicitly specify the size by rounding up the mapping_size to that alignment. Additionally, the current approach has an edge case bug. iommu_dma_map_page() already does the rounding up to compute the alloc_size argument. But swiotlb_tbl_map_single() then calculates the alignment offset based on the DMA min_align_mask, and adds that offset to alloc_size. If the offset is non-zero, the addition may result in a value that is larger than the max the swiotlb can allocate. If the rounding up is done _after_ the alignment offset is added to the mapping_size (and the original mapping_size conforms to the value returned by swiotlb_max_mapping_size), then the max that the swiotlb can allocate will not be exceeded. In view of these issues, simplify the swiotlb_tbl_map_single() interface by removing the alloc_size argument. Most call sites pass the same value for mapping_size and alloc_size, and they pass alloc_align_mask as zero. Just remove the redundant argument from these callers, as they will see no functional change. For iommu_dma_map_page() also remove the alloc_size argument, and have swiotlb_tbl_map_single() compute the alloc_size by rounding up mapping_size after adding the offset based on min_align_mask. This has the side effect of fixing the edge case bug but with no other functional change. Also add a sanity test on the alloc_align_mask. While IOMMU code currently ensures the granule is not larger than PAGE_SIZE, if that guarantee were to be removed in the future, the downstream effect on the swiotlb might go unnoticed until strange allocation failures occurred. Tested on an ARM64 system with 16K page size and some kernel test-only hackery to allow modifying the DMA min_align_mask and the granule size that becomes the alloc_align_mask. Tested these combinations with a variety of original memory addresses and sizes, including those that reproduce the edge case bug: * 4K granule and 0 min_align_mask * 4K granule and 0xFFF min_align_mask (4K - 1) * 16K granule and 0xFFF min_align_mask * 64K granule and 0xFFF min_align_mask * 64K granule and 0x3FFF min_align_mask (16K - 1) With the changes, all combinations pass. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-04-08 04:11:41 +00:00
swiotlb_addr = swiotlb_tbl_map_single(dev, paddr, size, 0, dir, attrs);
if (swiotlb_addr == (phys_addr_t)DMA_MAPPING_ERROR)
return DMA_MAPPING_ERROR;
/* Ensure that the address returned is DMA'ble */
dma_addr = phys_to_dma_unencrypted(dev, swiotlb_addr);
if (unlikely(!dma_capable(dev, dma_addr, size, true))) {
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
__swiotlb_tbl_unmap_single(dev, swiotlb_addr, size, dir,
attrs | DMA_ATTR_SKIP_CPU_SYNC,
swiotlb_find_pool(dev, swiotlb_addr));
dev_WARN_ONCE(dev, 1,
"swiotlb addr %pad+%zu overflow (mask %llx, bus limit %llx).\n",
&dma_addr, size, *dev->dma_mask, dev->bus_dma_limit);
return DMA_MAPPING_ERROR;
}
if (!dev_is_dma_coherent(dev) && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
arch_sync_dma_for_device(swiotlb_addr, size, dir);
return dma_addr;
}
size_t swiotlb_max_mapping_size(struct device *dev)
{
int min_align_mask = dma_get_min_align_mask(dev);
int min_align = 0;
/*
* swiotlb_find_slots() skips slots according to
* min align mask. This affects max mapping size.
* Take it into acount here.
*/
if (min_align_mask)
min_align = roundup(min_align_mask, IO_TLB_SIZE);
return ((size_t)IO_TLB_SIZE) * IO_TLB_SEGSIZE - min_align;
}
/**
* is_swiotlb_allocated() - check if the default software IO TLB is initialized
*/
bool is_swiotlb_allocated(void)
{
return io_tlb_default_mem.nslabs;
}
bool is_swiotlb_active(struct device *dev)
{
swiotlb: Convert io_default_tlb_mem to static allocation Since commit 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used"), 'struct device' may hold a copy of the global 'io_default_tlb_mem' pointer if the device is using swiotlb for DMA. A subsequent call to swiotlb_exit() will therefore leave dangling pointers behind in these device structures, resulting in KASAN splats such as: | BUG: KASAN: use-after-free in __iommu_dma_unmap_swiotlb+0x64/0xb0 | Read of size 8 at addr ffff8881d7830000 by task swapper/0/0 | | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc3-debug #1 | Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 | Call Trace: | <IRQ> | dump_stack+0x9c/0xcf | print_address_description.constprop.0+0x18/0x130 | kasan_report.cold+0x7f/0x111 | __iommu_dma_unmap_swiotlb+0x64/0xb0 | nvme_pci_complete_rq+0x73/0x130 | blk_complete_reqs+0x6f/0x80 | __do_softirq+0xfc/0x3be Convert 'io_default_tlb_mem' to a static structure, so that the per-device pointers remain valid after swiotlb_exit() has been invoked. All users are updated to reference the static structure directly, using the 'nslabs' field to determine whether swiotlb has been initialised. The 'slots' array is still allocated dynamically and referenced via a pointer rather than a flexible array member. Cc: Claire Chang <tientzu@chromium.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Fixes: 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used") Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Claire Chang <tientzu@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2021-07-20 13:38:24 +00:00
struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
return mem && mem->nslabs;
}
/**
* default_swiotlb_base() - get the base address of the default SWIOTLB
*
* Get the lowest physical address used by the default software IO TLB pool.
*/
phys_addr_t default_swiotlb_base(void)
{
#ifdef CONFIG_SWIOTLB_DYNAMIC
io_tlb_default_mem.can_grow = false;
#endif
return io_tlb_default_mem.defpool.start;
}
/**
* default_swiotlb_limit() - get the address limit of the default SWIOTLB
*
* Get the highest physical address used by the default software IO TLB pool.
*/
phys_addr_t default_swiotlb_limit(void)
{
#ifdef CONFIG_SWIOTLB_DYNAMIC
return io_tlb_default_mem.phys_limit;
#else
return io_tlb_default_mem.defpool.end - 1;
#endif
}
#ifdef CONFIG_DEBUG_FS
#ifdef CONFIG_SWIOTLB_DYNAMIC
static unsigned long mem_transient_used(struct io_tlb_mem *mem)
{
return atomic_long_read(&mem->transient_nslabs);
}
static int io_tlb_transient_used_get(void *data, u64 *val)
{
struct io_tlb_mem *mem = data;
*val = mem_transient_used(mem);
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(fops_io_tlb_transient_used, io_tlb_transient_used_get,
NULL, "%llu\n");
#endif /* CONFIG_SWIOTLB_DYNAMIC */
static int io_tlb_used_get(void *data, u64 *val)
{
struct io_tlb_mem *mem = data;
*val = mem_used(mem);
return 0;
}
static int io_tlb_hiwater_get(void *data, u64 *val)
{
struct io_tlb_mem *mem = data;
*val = atomic_long_read(&mem->used_hiwater);
return 0;
}
static int io_tlb_hiwater_set(void *data, u64 val)
{
struct io_tlb_mem *mem = data;
/* Only allow setting to zero */
if (val != 0)
return -EINVAL;
atomic_long_set(&mem->used_hiwater, val);
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(fops_io_tlb_used, io_tlb_used_get, NULL, "%llu\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_io_tlb_hiwater, io_tlb_hiwater_get,
io_tlb_hiwater_set, "%llu\n");
static void swiotlb_create_debugfs_files(struct io_tlb_mem *mem,
const char *dirname)
{
mem->debugfs = debugfs_create_dir(dirname, io_tlb_default_mem.debugfs);
if (!mem->nslabs)
return;
debugfs_create_ulong("io_tlb_nslabs", 0400, mem->debugfs, &mem->nslabs);
debugfs_create_file("io_tlb_used", 0400, mem->debugfs, mem,
&fops_io_tlb_used);
debugfs_create_file("io_tlb_used_hiwater", 0600, mem->debugfs, mem,
&fops_io_tlb_hiwater);
#ifdef CONFIG_SWIOTLB_DYNAMIC
debugfs_create_file("io_tlb_transient_nslabs", 0400, mem->debugfs,
mem, &fops_io_tlb_transient_used);
#endif
}
static int __init swiotlb_create_default_debugfs(void)
{
swiotlb_create_debugfs_files(&io_tlb_default_mem, "swiotlb");
return 0;
}
late_initcall(swiotlb_create_default_debugfs);
#else /* !CONFIG_DEBUG_FS */
static inline void swiotlb_create_debugfs_files(struct io_tlb_mem *mem,
const char *dirname)
{
}
#endif /* CONFIG_DEBUG_FS */
#ifdef CONFIG_DMA_RESTRICTED_POOL
struct page *swiotlb_alloc(struct device *dev, size_t size)
{
struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
struct io_tlb_pool *pool;
phys_addr_t tlb_addr;
unsigned int align;
int index;
if (!mem)
return NULL;
align = (1 << (get_order(size) + PAGE_SHIFT)) - 1;
index = swiotlb_find_slots(dev, 0, size, align, &pool);
if (index == -1)
return NULL;
tlb_addr = slot_addr(pool->start, index);
if (unlikely(!PAGE_ALIGNED(tlb_addr))) {
dev_WARN_ONCE(dev, 1, "Cannot allocate pages from non page-aligned swiotlb addr 0x%pa.\n",
&tlb_addr);
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
swiotlb_release_slots(dev, tlb_addr, pool);
return NULL;
}
return pfn_to_page(PFN_DOWN(tlb_addr));
}
bool swiotlb_free(struct device *dev, struct page *page, size_t size)
{
phys_addr_t tlb_addr = page_to_phys(page);
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
struct io_tlb_pool *pool;
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
pool = swiotlb_find_pool(dev, tlb_addr);
if (!pool)
return false;
swiotlb: reduce swiotlb pool lookups With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-08 19:41:00 +00:00
swiotlb_release_slots(dev, tlb_addr, pool);
return true;
}
static int rmem_swiotlb_device_init(struct reserved_mem *rmem,
struct device *dev)
{
struct io_tlb_mem *mem = rmem->priv;
unsigned long nslabs = rmem->size >> IO_TLB_SHIFT;
/* Set Per-device io tlb area to one */
unsigned int nareas = 1;
if (PageHighMem(pfn_to_page(PHYS_PFN(rmem->base)))) {
dev_err(dev, "Restricted DMA pool must be accessible within the linear mapping.");
return -EINVAL;
}
/*
* Since multiple devices can share the same pool, the private data,
* io_tlb_mem struct, will be initialized by the first device attached
* to it.
*/
if (!mem) {
struct io_tlb_pool *pool;
swiotlb: Convert io_default_tlb_mem to static allocation Since commit 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used"), 'struct device' may hold a copy of the global 'io_default_tlb_mem' pointer if the device is using swiotlb for DMA. A subsequent call to swiotlb_exit() will therefore leave dangling pointers behind in these device structures, resulting in KASAN splats such as: | BUG: KASAN: use-after-free in __iommu_dma_unmap_swiotlb+0x64/0xb0 | Read of size 8 at addr ffff8881d7830000 by task swapper/0/0 | | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc3-debug #1 | Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 | Call Trace: | <IRQ> | dump_stack+0x9c/0xcf | print_address_description.constprop.0+0x18/0x130 | kasan_report.cold+0x7f/0x111 | __iommu_dma_unmap_swiotlb+0x64/0xb0 | nvme_pci_complete_rq+0x73/0x130 | blk_complete_reqs+0x6f/0x80 | __do_softirq+0xfc/0x3be Convert 'io_default_tlb_mem' to a static structure, so that the per-device pointers remain valid after swiotlb_exit() has been invoked. All users are updated to reference the static structure directly, using the 'nslabs' field to determine whether swiotlb has been initialised. The 'slots' array is still allocated dynamically and referenced via a pointer rather than a flexible array member. Cc: Claire Chang <tientzu@chromium.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Fixes: 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used") Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Claire Chang <tientzu@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2021-07-20 13:38:24 +00:00
mem = kzalloc(sizeof(*mem), GFP_KERNEL);
if (!mem)
return -ENOMEM;
pool = &mem->defpool;
pool->slots = kcalloc(nslabs, sizeof(*pool->slots), GFP_KERNEL);
if (!pool->slots) {
swiotlb: Convert io_default_tlb_mem to static allocation Since commit 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used"), 'struct device' may hold a copy of the global 'io_default_tlb_mem' pointer if the device is using swiotlb for DMA. A subsequent call to swiotlb_exit() will therefore leave dangling pointers behind in these device structures, resulting in KASAN splats such as: | BUG: KASAN: use-after-free in __iommu_dma_unmap_swiotlb+0x64/0xb0 | Read of size 8 at addr ffff8881d7830000 by task swapper/0/0 | | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc3-debug #1 | Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 | Call Trace: | <IRQ> | dump_stack+0x9c/0xcf | print_address_description.constprop.0+0x18/0x130 | kasan_report.cold+0x7f/0x111 | __iommu_dma_unmap_swiotlb+0x64/0xb0 | nvme_pci_complete_rq+0x73/0x130 | blk_complete_reqs+0x6f/0x80 | __do_softirq+0xfc/0x3be Convert 'io_default_tlb_mem' to a static structure, so that the per-device pointers remain valid after swiotlb_exit() has been invoked. All users are updated to reference the static structure directly, using the 'nslabs' field to determine whether swiotlb has been initialised. The 'slots' array is still allocated dynamically and referenced via a pointer rather than a flexible array member. Cc: Claire Chang <tientzu@chromium.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Fixes: 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used") Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Claire Chang <tientzu@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2021-07-20 13:38:24 +00:00
kfree(mem);
return -ENOMEM;
}
pool->areas = kcalloc(nareas, sizeof(*pool->areas),
GFP_KERNEL);
if (!pool->areas) {
kfree(pool->slots);
kfree(mem);
return -ENOMEM;
}
set_memory_decrypted((unsigned long)phys_to_virt(rmem->base),
rmem->size >> PAGE_SHIFT);
swiotlb_init_io_tlb_pool(pool, rmem->base, nslabs,
false, nareas);
mem->force_bounce = true;
mem->for_alloc = true;
#ifdef CONFIG_SWIOTLB_DYNAMIC
spin_lock_init(&mem->lock);
INIT_LIST_HEAD_RCU(&mem->pools);
#endif
add_mem_pool(mem, pool);
rmem->priv = mem;
swiotlb_create_debugfs_files(mem, rmem->name);
}
dev->dma_io_tlb_mem = mem;
return 0;
}
static void rmem_swiotlb_device_release(struct reserved_mem *rmem,
struct device *dev)
{
swiotlb: Convert io_default_tlb_mem to static allocation Since commit 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used"), 'struct device' may hold a copy of the global 'io_default_tlb_mem' pointer if the device is using swiotlb for DMA. A subsequent call to swiotlb_exit() will therefore leave dangling pointers behind in these device structures, resulting in KASAN splats such as: | BUG: KASAN: use-after-free in __iommu_dma_unmap_swiotlb+0x64/0xb0 | Read of size 8 at addr ffff8881d7830000 by task swapper/0/0 | | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc3-debug #1 | Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 | Call Trace: | <IRQ> | dump_stack+0x9c/0xcf | print_address_description.constprop.0+0x18/0x130 | kasan_report.cold+0x7f/0x111 | __iommu_dma_unmap_swiotlb+0x64/0xb0 | nvme_pci_complete_rq+0x73/0x130 | blk_complete_reqs+0x6f/0x80 | __do_softirq+0xfc/0x3be Convert 'io_default_tlb_mem' to a static structure, so that the per-device pointers remain valid after swiotlb_exit() has been invoked. All users are updated to reference the static structure directly, using the 'nslabs' field to determine whether swiotlb has been initialised. The 'slots' array is still allocated dynamically and referenced via a pointer rather than a flexible array member. Cc: Claire Chang <tientzu@chromium.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Fixes: 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used") Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Claire Chang <tientzu@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2021-07-20 13:38:24 +00:00
dev->dma_io_tlb_mem = &io_tlb_default_mem;
}
static const struct reserved_mem_ops rmem_swiotlb_ops = {
.device_init = rmem_swiotlb_device_init,
.device_release = rmem_swiotlb_device_release,
};
static int __init rmem_swiotlb_setup(struct reserved_mem *rmem)
{
unsigned long node = rmem->fdt_node;
if (of_get_flat_dt_prop(node, "reusable", NULL) ||
of_get_flat_dt_prop(node, "linux,cma-default", NULL) ||
of_get_flat_dt_prop(node, "linux,dma-default", NULL) ||
of_get_flat_dt_prop(node, "no-map", NULL))
return -EINVAL;
rmem->ops = &rmem_swiotlb_ops;
pr_info("Reserved memory: created restricted DMA pool at %pa, size %ld MiB\n",
&rmem->base, (unsigned long)rmem->size / SZ_1M);
return 0;
}
RESERVEDMEM_OF_DECLARE(dma, "restricted-dma-pool", rmem_swiotlb_setup);
#endif /* CONFIG_DMA_RESTRICTED_POOL */