linux-stable/net/ipv6/ila/ila_lwt.c

331 lines
7.7 KiB
C
Raw Permalink Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
#include <linux/errno.h>
#include <linux/ip.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/skbuff.h>
#include <linux/socket.h>
#include <linux/types.h>
#include <net/checksum.h>
#include <net/dst_cache.h>
#include <net/ip.h>
#include <net/ip6_fib.h>
#include <net/ip6_route.h>
#include <net/lwtunnel.h>
#include <net/protocol.h>
#include <uapi/linux/ila.h>
#include "ila.h"
struct ila_lwt {
struct ila_params p;
struct dst_cache dst_cache;
u32 connected : 1;
u32 lwt_output : 1;
};
static inline struct ila_lwt *ila_lwt_lwtunnel(
struct lwtunnel_state *lwt)
{
return (struct ila_lwt *)lwt->data;
}
static inline struct ila_params *ila_params_lwtunnel(
struct lwtunnel_state *lwt)
{
return &ila_lwt_lwtunnel(lwt)->p;
}
static int ila_output(struct net *net, struct sock *sk, struct sk_buff *skb)
{
struct dst_entry *orig_dst = skb_dst(skb);
struct rt6_info *rt = dst_rt6_info(orig_dst);
struct ila_lwt *ilwt = ila_lwt_lwtunnel(orig_dst->lwtstate);
struct dst_entry *dst;
int err = -EINVAL;
if (skb->protocol != htons(ETH_P_IPV6))
goto drop;
if (ilwt->lwt_output)
ila_update_ipv6_locator(skb,
ila_params_lwtunnel(orig_dst->lwtstate),
true);
if (rt->rt6i_flags & (RTF_GATEWAY | RTF_CACHE)) {
/* Already have a next hop address in route, no need for
* dest cache route.
*/
return orig_dst->lwtstate->orig_output(net, sk, skb);
}
local_bh_disable();
dst = dst_cache_get(&ilwt->dst_cache);
local_bh_enable();
if (unlikely(!dst)) {
struct ipv6hdr *ip6h = ipv6_hdr(skb);
struct flowi6 fl6;
/* Lookup a route for the new destination. Take into
* account that the base route may already have a gateway.
*/
memset(&fl6, 0, sizeof(fl6));
fl6.flowi6_oif = orig_dst->dev->ifindex;
fl6.flowi6_iif = LOOPBACK_IFINDEX;
fl6.daddr = *rt6_nexthop(dst_rt6_info(orig_dst),
&ip6h->daddr);
dst = ip6_route_output(net, NULL, &fl6);
if (dst->error) {
err = -EHOSTUNREACH;
dst_release(dst);
goto drop;
}
dst = xfrm_lookup(net, dst, flowi6_to_flowi(&fl6), NULL, 0);
if (IS_ERR(dst)) {
err = PTR_ERR(dst);
goto drop;
}
if (ilwt->connected) {
local_bh_disable();
dst_cache_set_ip6(&ilwt->dst_cache, dst, &fl6.saddr);
local_bh_enable();
}
}
skb_dst_set(skb, dst);
return dst_output(net, sk, skb);
drop:
kfree_skb(skb);
return err;
}
static int ila_input(struct sk_buff *skb)
{
struct dst_entry *dst = skb_dst(skb);
struct ila_lwt *ilwt = ila_lwt_lwtunnel(dst->lwtstate);
if (skb->protocol != htons(ETH_P_IPV6))
goto drop;
if (!ilwt->lwt_output)
ila_update_ipv6_locator(skb,
ila_params_lwtunnel(dst->lwtstate),
false);
return dst->lwtstate->orig_input(skb);
drop:
kfree_skb(skb);
return -EINVAL;
}
static const struct nla_policy ila_nl_policy[ILA_ATTR_MAX + 1] = {
[ILA_ATTR_LOCATOR] = { .type = NLA_U64, },
[ILA_ATTR_CSUM_MODE] = { .type = NLA_U8, },
[ILA_ATTR_IDENT_TYPE] = { .type = NLA_U8, },
[ILA_ATTR_HOOK_TYPE] = { .type = NLA_U8, },
};
static int ila_build_state(struct net *net, struct nlattr *nla,
unsigned int family, const void *cfg,
struct lwtunnel_state **ts,
struct netlink_ext_ack *extack)
{
struct ila_lwt *ilwt;
struct ila_params *p;
struct nlattr *tb[ILA_ATTR_MAX + 1];
struct lwtunnel_state *newts;
const struct fib6_config *cfg6 = cfg;
struct ila_addr *iaddr;
u8 ident_type = ILA_ATYPE_USE_FORMAT;
u8 hook_type = ILA_HOOK_ROUTE_OUTPUT;
u8 csum_mode = ILA_CSUM_NO_ACTION;
bool lwt_output = true;
u8 eff_ident_type;
int ret;
if (family != AF_INET6)
return -EINVAL;
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
ret = nla_parse_nested_deprecated(tb, ILA_ATTR_MAX, nla,
ila_nl_policy, extack);
if (ret < 0)
return ret;
if (!tb[ILA_ATTR_LOCATOR])
return -EINVAL;
iaddr = (struct ila_addr *)&cfg6->fc_dst;
if (tb[ILA_ATTR_IDENT_TYPE])
ident_type = nla_get_u8(tb[ILA_ATTR_IDENT_TYPE]);
if (ident_type == ILA_ATYPE_USE_FORMAT) {
/* Infer identifier type from type field in formatted
* identifier.
*/
if (cfg6->fc_dst_len < 8 * sizeof(struct ila_locator) + 3) {
/* Need to have full locator and at least type field
* included in destination
*/
return -EINVAL;
}
eff_ident_type = iaddr->ident.type;
} else {
eff_ident_type = ident_type;
}
switch (eff_ident_type) {
case ILA_ATYPE_IID:
/* Don't allow ILA for IID type */
return -EINVAL;
case ILA_ATYPE_LUID:
break;
case ILA_ATYPE_VIRT_V4:
case ILA_ATYPE_VIRT_UNI_V6:
case ILA_ATYPE_VIRT_MULTI_V6:
case ILA_ATYPE_NONLOCAL_ADDR:
/* These ILA formats are not supported yet. */
default:
return -EINVAL;
}
if (tb[ILA_ATTR_HOOK_TYPE])
hook_type = nla_get_u8(tb[ILA_ATTR_HOOK_TYPE]);
switch (hook_type) {
case ILA_HOOK_ROUTE_OUTPUT:
lwt_output = true;
break;
case ILA_HOOK_ROUTE_INPUT:
lwt_output = false;
break;
default:
return -EINVAL;
}
if (tb[ILA_ATTR_CSUM_MODE])
csum_mode = nla_get_u8(tb[ILA_ATTR_CSUM_MODE]);
if (csum_mode == ILA_CSUM_NEUTRAL_MAP &&
ila_csum_neutral_set(iaddr->ident)) {
/* Don't allow translation if checksum neutral bit is
* configured and it's set in the SIR address.
*/
return -EINVAL;
}
newts = lwtunnel_state_alloc(sizeof(*ilwt));
if (!newts)
return -ENOMEM;
ilwt = ila_lwt_lwtunnel(newts);
ret = dst_cache_init(&ilwt->dst_cache, GFP_ATOMIC);
if (ret) {
kfree(newts);
return ret;
}
ilwt->lwt_output = !!lwt_output;
p = ila_params_lwtunnel(newts);
p->csum_mode = csum_mode;
p->ident_type = ident_type;
p->locator.v64 = (__force __be64)nla_get_u64(tb[ILA_ATTR_LOCATOR]);
/* Precompute checksum difference for translation since we
* know both the old locator and the new one.
*/
p->locator_match = iaddr->loc;
ila_init_saved_csum(p);
newts->type = LWTUNNEL_ENCAP_ILA;
newts->flags |= LWTUNNEL_STATE_OUTPUT_REDIRECT |
LWTUNNEL_STATE_INPUT_REDIRECT;
if (cfg6->fc_dst_len == 8 * sizeof(struct in6_addr))
ilwt->connected = 1;
*ts = newts;
return 0;
}
static void ila_destroy_state(struct lwtunnel_state *lwt)
{
dst_cache_destroy(&ila_lwt_lwtunnel(lwt)->dst_cache);
}
static int ila_fill_encap_info(struct sk_buff *skb,
struct lwtunnel_state *lwtstate)
{
struct ila_params *p = ila_params_lwtunnel(lwtstate);
struct ila_lwt *ilwt = ila_lwt_lwtunnel(lwtstate);
if (nla_put_u64_64bit(skb, ILA_ATTR_LOCATOR, (__force u64)p->locator.v64,
ILA_ATTR_PAD))
goto nla_put_failure;
if (nla_put_u8(skb, ILA_ATTR_CSUM_MODE, (__force u8)p->csum_mode))
goto nla_put_failure;
if (nla_put_u8(skb, ILA_ATTR_IDENT_TYPE, (__force u8)p->ident_type))
goto nla_put_failure;
if (nla_put_u8(skb, ILA_ATTR_HOOK_TYPE,
ilwt->lwt_output ? ILA_HOOK_ROUTE_OUTPUT :
ILA_HOOK_ROUTE_INPUT))
goto nla_put_failure;
return 0;
nla_put_failure:
return -EMSGSIZE;
}
static int ila_encap_nlsize(struct lwtunnel_state *lwtstate)
{
return nla_total_size_64bit(sizeof(u64)) + /* ILA_ATTR_LOCATOR */
nla_total_size(sizeof(u8)) + /* ILA_ATTR_CSUM_MODE */
nla_total_size(sizeof(u8)) + /* ILA_ATTR_IDENT_TYPE */
nla_total_size(sizeof(u8)) + /* ILA_ATTR_HOOK_TYPE */
0;
}
static int ila_encap_cmp(struct lwtunnel_state *a, struct lwtunnel_state *b)
{
struct ila_params *a_p = ila_params_lwtunnel(a);
struct ila_params *b_p = ila_params_lwtunnel(b);
return (a_p->locator.v64 != b_p->locator.v64);
}
static const struct lwtunnel_encap_ops ila_encap_ops = {
.build_state = ila_build_state,
.destroy_state = ila_destroy_state,
.output = ila_output,
.input = ila_input,
.fill_encap = ila_fill_encap_info,
.get_encap_size = ila_encap_nlsize,
.cmp_encap = ila_encap_cmp,
.owner = THIS_MODULE,
};
int ila_lwt_init(void)
{
return lwtunnel_encap_add_ops(&ila_encap_ops, LWTUNNEL_ENCAP_ILA);
}
void ila_lwt_fini(void)
{
lwtunnel_encap_del_ops(&ila_encap_ops, LWTUNNEL_ENCAP_ILA);
}