License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
# SPDX-License-Identifier: GPL-2.0
|
2018-07-12 00:38:52 +00:00
|
|
|
|
2018-05-28 09:22:06 +00:00
|
|
|
gcc-plugin-$(CONFIG_GCC_PLUGIN_LATENT_ENTROPY) += latent_entropy_plugin.so
|
2018-07-12 00:38:52 +00:00
|
|
|
gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_LATENT_ENTROPY) \
|
|
|
|
|
+= -DLATENT_ENTROPY_PLUGIN
|
2018-05-28 09:22:06 +00:00
|
|
|
ifdef CONFIG_GCC_PLUGIN_LATENT_ENTROPY
|
gcc-plugins: Undefine LATENT_ENTROPY_PLUGIN when plugin disabled for a file
Commit 36d4b36b6959 ("lib/nodemask: inline next_node_in() and
node_random()") refactored some code by moving node_random() from
lib/nodemask.c to include/linux/nodemask.h, thus requiring nodemask.h to
include random.h, which conditionally defines add_latent_entropy()
depending on whether the macro LATENT_ENTROPY_PLUGIN is defined.
This broke the build on powerpc, where nodemask.h is indirectly included
in arch/powerpc/kernel/prom_init.c, part of the early boot machinery that
is excluded from the latent entropy plugin using
DISABLE_LATENT_ENTROPY_PLUGIN. It turns out that while we add a gcc flag
to disable the actual plugin, we don't undefine LATENT_ENTROPY_PLUGIN.
This leads to the following:
CC arch/powerpc/kernel/prom_init.o
In file included from ./include/linux/nodemask.h:97,
from ./include/linux/mmzone.h:17,
from ./include/linux/gfp.h:7,
from ./include/linux/xarray.h:15,
from ./include/linux/radix-tree.h:21,
from ./include/linux/idr.h:15,
from ./include/linux/kernfs.h:12,
from ./include/linux/sysfs.h:16,
from ./include/linux/kobject.h:20,
from ./include/linux/pci.h:35,
from arch/powerpc/kernel/prom_init.c:24:
./include/linux/random.h: In function 'add_latent_entropy':
./include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
| ^~~~~~~~~~~~~~
| add_latent_entropy
./include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
make[2]: *** [scripts/Makefile.build:249: arch/powerpc/kernel/prom_init.o] Fehler 1
make[1]: *** [scripts/Makefile.build:465: arch/powerpc/kernel] Fehler 2
make: *** [Makefile:1855: arch/powerpc] Error 2
Change the DISABLE_LATENT_ENTROPY_PLUGIN flags to undefine
LATENT_ENTROPY_PLUGIN for files where the plugin is disabled.
Cc: Yury Norov <yury.norov@gmail.com>
Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216367
Link: https://lore.kernel.org/linuxppc-dev/alpine.DEB.2.22.394.2208152006320.289321@ramsan.of.borg/
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220816051720.44108-1-ajd@linux.ibm.com
2022-08-16 05:17:20 +00:00
|
|
|
DISABLE_LATENT_ENTROPY_PLUGIN += -fplugin-arg-latent_entropy_plugin-disable -ULATENT_ENTROPY_PLUGIN
|
2018-05-28 09:22:06 +00:00
|
|
|
endif
|
2018-07-12 00:38:52 +00:00
|
|
|
export DISABLE_LATENT_ENTROPY_PLUGIN
|
2017-01-13 19:14:39 +00:00
|
|
|
|
2018-05-28 09:22:06 +00:00
|
|
|
gcc-plugin-$(CONFIG_GCC_PLUGIN_STRUCTLEAK) += structleak_plugin.so
|
2018-07-12 00:38:52 +00:00
|
|
|
gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE) \
|
|
|
|
|
+= -fplugin-arg-structleak_plugin-verbose
|
2019-01-23 23:19:29 +00:00
|
|
|
gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF) \
|
|
|
|
|
+= -fplugin-arg-structleak_plugin-byref
|
2018-07-12 00:38:52 +00:00
|
|
|
gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL) \
|
|
|
|
|
+= -fplugin-arg-structleak_plugin-byref-all
|
2021-09-29 21:27:09 +00:00
|
|
|
ifdef CONFIG_GCC_PLUGIN_STRUCTLEAK
|
|
|
|
|
DISABLE_STRUCTLEAK_PLUGIN += -fplugin-arg-structleak_plugin-disable
|
|
|
|
|
endif
|
|
|
|
|
export DISABLE_STRUCTLEAK_PLUGIN
|
2018-07-12 00:38:52 +00:00
|
|
|
gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK) \
|
|
|
|
|
+= -DSTRUCTLEAK_PLUGIN
|
2017-05-06 06:37:45 +00:00
|
|
|
|
2018-08-16 22:16:59 +00:00
|
|
|
gcc-plugin-$(CONFIG_GCC_PLUGIN_STACKLEAK) += stackleak_plugin.so
|
|
|
|
|
gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STACKLEAK) \
|
|
|
|
|
+= -DSTACKLEAK_PLUGIN
|
|
|
|
|
gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STACKLEAK) \
|
|
|
|
|
+= -fplugin-arg-stackleak_plugin-track-min-size=$(CONFIG_STACKLEAK_TRACK_MIN_SIZE)
|
gcc-plugins/stackleak: Use asm instrumentation to avoid useless register saving
The kernel code instrumentation in stackleak gcc plugin works in two stages.
At first, stack tracking is added to GIMPLE representation of every function
(except some special cases). And later, when stack frame size info is
available, stack tracking is removed from the RTL representation of the
functions with small stack frame. There is an unwanted side-effect for these
functions: some of them do useless work with caller-saved registers.
As an example of such case, proc_sys_write without() instrumentation:
55 push %rbp
41 b8 01 00 00 00 mov $0x1,%r8d
48 89 e5 mov %rsp,%rbp
e8 11 ff ff ff callq ffffffff81284610 <proc_sys_call_handler>
5d pop %rbp
c3 retq
0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1)
00 00 00
proc_sys_write() with instrumentation:
55 push %rbp
48 89 e5 mov %rsp,%rbp
41 56 push %r14
41 55 push %r13
41 54 push %r12
53 push %rbx
49 89 f4 mov %rsi,%r12
48 89 fb mov %rdi,%rbx
49 89 d5 mov %rdx,%r13
49 89 ce mov %rcx,%r14
4c 89 f1 mov %r14,%rcx
4c 89 ea mov %r13,%rdx
4c 89 e6 mov %r12,%rsi
48 89 df mov %rbx,%rdi
41 b8 01 00 00 00 mov $0x1,%r8d
e8 f2 fe ff ff callq ffffffff81298e80 <proc_sys_call_handler>
5b pop %rbx
41 5c pop %r12
41 5d pop %r13
41 5e pop %r14
5d pop %rbp
c3 retq
66 0f 1f 84 00 00 00 nopw 0x0(%rax,%rax,1)
00 00
Let's improve the instrumentation to avoid this:
1. Make stackleak_track_stack() save all register that it works with.
Use no_caller_saved_registers attribute for that function. This attribute
is available for x86_64 and i386 starting from gcc-7.
2. Insert calling stackleak_track_stack() in asm:
asm volatile("call stackleak_track_stack" :: "r" (current_stack_pointer))
Here we use ASM_CALL_CONSTRAINT trick from arch/x86/include/asm/asm.h.
The input constraint is taken into account during gcc shrink-wrapping
optimization. It is needed to be sure that stackleak_track_stack() call is
inserted after the prologue of the containing function, when the stack
frame is prepared.
This work is a deep reengineering of the idea described on grsecurity blog
https://grsecurity.net/resolving_an_unfortunate_stackleak_interaction
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: https://lore.kernel.org/r/20200624123330.83226-5-alex.popov@linux.com
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-24 12:33:29 +00:00
|
|
|
gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STACKLEAK) \
|
|
|
|
|
+= -fplugin-arg-stackleak_plugin-arch=$(SRCARCH)
|
2022-02-06 17:20:08 +00:00
|
|
|
gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STACKLEAK_VERBOSE) \
|
|
|
|
|
+= -fplugin-arg-stackleak_plugin-verbose
|
2018-08-16 22:16:59 +00:00
|
|
|
ifdef CONFIG_GCC_PLUGIN_STACKLEAK
|
|
|
|
|
DISABLE_STACKLEAK_PLUGIN += -fplugin-arg-stackleak_plugin-disable
|
|
|
|
|
endif
|
|
|
|
|
export DISABLE_STACKLEAK_PLUGIN
|
|
|
|
|
|
2018-12-06 08:32:57 +00:00
|
|
|
gcc-plugin-$(CONFIG_GCC_PLUGIN_ARM_SSP_PER_TASK) += arm_ssp_per_task_plugin.so
|
|
|
|
|
ifdef CONFIG_GCC_PLUGIN_ARM_SSP_PER_TASK
|
|
|
|
|
DISABLE_ARM_SSP_PER_TASK_PLUGIN += -fplugin-arg-arm_ssp_per_task_plugin-disable
|
|
|
|
|
endif
|
|
|
|
|
export DISABLE_ARM_SSP_PER_TASK_PLUGIN
|
|
|
|
|
|
2018-07-12 00:38:52 +00:00
|
|
|
# All the plugin CFLAGS are collected here in case a build target needs to
|
|
|
|
|
# filter them out of the KBUILD_CFLAGS.
|
2018-05-28 09:22:06 +00:00
|
|
|
GCC_PLUGINS_CFLAGS := $(strip $(addprefix -fplugin=$(objtree)/scripts/gcc-plugins/, $(gcc-plugin-y)) $(gcc-plugin-cflags-y))
|
2018-07-12 00:38:52 +00:00
|
|
|
export GCC_PLUGINS_CFLAGS
|
2016-06-18 06:11:12 +00:00
|
|
|
|
2018-07-12 00:38:52 +00:00
|
|
|
# Add the flags to the build!
|
2018-05-28 09:22:06 +00:00
|
|
|
KBUILD_CFLAGS += $(GCC_PLUGINS_CFLAGS)
|
2018-07-12 00:38:52 +00:00
|
|
|
|
2022-05-03 20:54:59 +00:00
|
|
|
# Some plugins are enabled outside of this Makefile, but they still need to
|
|
|
|
|
# be included in GCC_PLUGIN so they can get built.
|
|
|
|
|
gcc-plugin-external-$(CONFIG_GCC_PLUGIN_SANCOV) \
|
|
|
|
|
+= sancov_plugin.so
|
2022-05-03 20:55:01 +00:00
|
|
|
gcc-plugin-external-$(CONFIG_GCC_PLUGIN_RANDSTRUCT) \
|
|
|
|
|
+= randomize_layout_plugin.so
|
2022-05-03 20:54:59 +00:00
|
|
|
|
|
|
|
|
# All enabled GCC plugins are collected here for building in
|
|
|
|
|
# scripts/gcc-scripts/Makefile.
|
|
|
|
|
GCC_PLUGIN := $(gcc-plugin-y) $(gcc-plugin-external-y)
|
2018-07-12 00:38:52 +00:00
|
|
|
export GCC_PLUGIN
|