mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity
linux-stable/scripts/Makefile.package

249 lines
8.7 KiB
Makefile
Raw Normal View History

treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 12:07:45 +00:00
# SPDX-License-Identifier: GPL-2.0-only
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# Makefile for the different targets used to generate full packages of a kernel
kbuild: pkg: rename scripts/package/Makefile to scripts/Makefile.package scripts/package/Makefile does not use $(obj) or $(src) at all. It actually generates files and directories in the top of $(objtree). I do not see much sense in descending into scripts/package/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-21 07:02:04 +00:00
include $(srctree)/scripts/Kbuild.include
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
include $(srctree)/scripts/Makefile.lib
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
# Git
# ---------------------------------------------------------------------------
kbuild: deb-pkg: create source package without cleaning If you run 'make deb-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, *.diff.gz contained some check-in files such as .clang-format, .cocciconfig. With this commit, *.diff.gz will only contain the .config and debian/. The other source files will go into the .orig tarball. linux.tar.gz is rebuilt only when the source files that would go into the tarball are changed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 01:20:24 +00:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
filechk_HEAD = git -C $(srctree) rev-parse --verify HEAD 2>/dev/null
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 01:20:30 +00:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
.tmp_HEAD: check-git FORCE
$(call filechk,HEAD)
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 01:20:30 +00:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
PHONY += check-git
check-git:
@if ! $(srctree)/scripts/check-git; then \
echo >&2 "error: creating source package requires git repository"; \
false; \
fi
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 01:20:30 +00:00
kbuild: deb-pkg: add KDEB_SOURCE_COMPRESS to specify source compression Add KDEB_SOURCE_COMPRESS to specify the compression for the orig and debian tarballs. (cf. the existing KDEB_COMPRESS is used to specify the compression for binary packages.) Supported algorithms are gzip, bzip2, lzma, and xz, all of which are supported by dpkg-source. The current default is gzip. You can change it via the environment variable, for example, 'KDEB_SOURCE_COMPRESS=xz make deb-pkg'. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-17 14:25:48 +00:00
git-config-tar.gz = -c tar.tar.gz.command="$(KGZIP)"
git-config-tar.bz2 = -c tar.tar.bz2.command="$(KBZIP2)"
git-config-tar.lzma = -c tar.tar.lzma.command="$(LZMA)"
git-config-tar.xz = -c tar.tar.xz.command="$(XZ)"
git-config-tar.zst = -c tar.tar.zst.command="$(ZSTD)"
kbuild: do not create intermediate *.tar for source tarballs Since commit 05e96e96a315 ("kbuild: use git-archive for source package creation"), a source tarball is created in two steps; create *.tar file then compress it. I split the compression as a separate rule because I just thought 'git archive' supported only gzip. For other compression algorithms, I could pipe the two commands: $ git archive HEAD | xz > linux.tar.xz I read git-archive(1) carefully, and I realized GIT had provided a more elegant way: $ git -c tar.tar.xz.command=xz archive -o linux.tar.xz HEAD This commit uses 'tar.tar.*.command' configuration to specify the compression backend so we can compress a source tarball on-the-fly. GIT commit 767cf4579f0e ("archive: implement configurable tar filters") is more than a decade old, so it should be available on almost all build environments. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2023-04-07 10:16:28 +00:00
kbuild: merge cmd_archive_linux and cmd_archive_perf The two commands, cmd_archive_linux and cmd_archive_perf, are similar. Merge them to make it easier to add more changes to the git-archive command. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2023-04-07 10:16:27 +00:00
quiet_cmd_archive = ARCHIVE $@
kbuild: do not create intermediate *.tar for source tarballs Since commit 05e96e96a315 ("kbuild: use git-archive for source package creation"), a source tarball is created in two steps; create *.tar file then compress it. I split the compression as a separate rule because I just thought 'git archive' supported only gzip. For other compression algorithms, I could pipe the two commands: $ git archive HEAD | xz > linux.tar.xz I read git-archive(1) carefully, and I realized GIT had provided a more elegant way: $ git -c tar.tar.xz.command=xz archive -o linux.tar.xz HEAD This commit uses 'tar.tar.*.command' configuration to specify the compression backend so we can compress a source tarball on-the-fly. GIT commit 767cf4579f0e ("archive: implement configurable tar filters") is more than a decade old, so it should be available on almost all build environments. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2023-04-07 10:16:28 +00:00
cmd_archive = git -C $(srctree) $(git-config-tar$(suffix $@)) archive \
kbuild: use proper prefix for tarballs to fix rpm-pkg build error Since commit f8d94c4e403c ("kbuild: do not create intermediate *.tar for source tarballs"), 'make rpm-pkg' fails because the prefix of the source tarball is 'linux.tar/' instead of 'linux/'. $(basename $@) strips only '.gz' from the filename linux.tar.gz. You need to strip two suffixes from compressed tarballs and one suffix from uncompressed tarballs (for example 'perf-6.3.0.tar' generated by 'make perf-tar-src-pkg'). One tricky fix might be --prefix=$(firstword $(subst .tar, ,$@))/ but I think it is better to hard-code the prefix. Fixes: f8d94c4e403c ("kbuild: do not create intermediate *.tar for source tarballs") Reported-by: Jiwei Sun <sunjw10@lenovo.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-19 17:04:24 +00:00
--output=$$(realpath $@) $(archive-args)
kbuild: merge cmd_archive_linux and cmd_archive_perf The two commands, cmd_archive_linux and cmd_archive_perf, are similar. Merge them to make it easier to add more changes to the git-archive command. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2023-04-07 10:16:27 +00:00
kbuild: deb-pkg: add KDEB_SOURCE_COMPRESS to specify source compression Add KDEB_SOURCE_COMPRESS to specify the compression for the orig and debian tarballs. (cf. the existing KDEB_COMPRESS is used to specify the compression for binary packages.) Supported algorithms are gzip, bzip2, lzma, and xz, all of which are supported by dpkg-source. The current default is gzip. You can change it via the environment variable, for example, 'KDEB_SOURCE_COMPRESS=xz make deb-pkg'. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-17 14:25:48 +00:00
suffix-gzip := .gz
suffix-bzip2 := .bz2
suffix-lzma := .lzma
suffix-xz := .xz
kbuild: deb-pkg: create source package without cleaning If you run 'make deb-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, *.diff.gz contained some check-in files such as .clang-format, .cocciconfig. With this commit, *.diff.gz will only contain the .config and debian/. The other source files will go into the .orig tarball. linux.tar.gz is rebuilt only when the source files that would go into the tarball are changed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 01:20:24 +00:00
# Linux source tarball
# ---------------------------------------------------------------------------
kbuild: deb-pkg: add KDEB_SOURCE_COMPRESS to specify source compression Add KDEB_SOURCE_COMPRESS to specify the compression for the orig and debian tarballs. (cf. the existing KDEB_COMPRESS is used to specify the compression for binary packages.) Supported algorithms are gzip, bzip2, lzma, and xz, all of which are supported by dpkg-source. The current default is gzip. You can change it via the environment variable, for example, 'KDEB_SOURCE_COMPRESS=xz make deb-pkg'. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-17 14:25:48 +00:00
linux-tarballs := $(addprefix linux, .tar.gz .tar.bz2 .tar.lzma .tar.xz)
kbuild: do not create intermediate *.tar for source tarballs Since commit 05e96e96a315 ("kbuild: use git-archive for source package creation"), a source tarball is created in two steps; create *.tar file then compress it. I split the compression as a separate rule because I just thought 'git archive' supported only gzip. For other compression algorithms, I could pipe the two commands: $ git archive HEAD | xz > linux.tar.xz I read git-archive(1) carefully, and I realized GIT had provided a more elegant way: $ git -c tar.tar.xz.command=xz archive -o linux.tar.xz HEAD This commit uses 'tar.tar.*.command' configuration to specify the compression backend so we can compress a source tarball on-the-fly. GIT commit 767cf4579f0e ("archive: implement configurable tar filters") is more than a decade old, so it should be available on almost all build environments. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2023-04-07 10:16:28 +00:00
targets += $(linux-tarballs)
kbuild: use proper prefix for tarballs to fix rpm-pkg build error Since commit f8d94c4e403c ("kbuild: do not create intermediate *.tar for source tarballs"), 'make rpm-pkg' fails because the prefix of the source tarball is 'linux.tar/' instead of 'linux/'. $(basename $@) strips only '.gz' from the filename linux.tar.gz. You need to strip two suffixes from compressed tarballs and one suffix from uncompressed tarballs (for example 'perf-6.3.0.tar' generated by 'make perf-tar-src-pkg'). One tricky fix might be --prefix=$(firstword $(subst .tar, ,$@))/ but I think it is better to hard-code the prefix. Fixes: f8d94c4e403c ("kbuild: do not create intermediate *.tar for source tarballs") Reported-by: Jiwei Sun <sunjw10@lenovo.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-19 17:04:24 +00:00
$(linux-tarballs): archive-args = --prefix=linux/ $$(cat $<)
kbuild: do not create intermediate *.tar for source tarballs Since commit 05e96e96a315 ("kbuild: use git-archive for source package creation"), a source tarball is created in two steps; create *.tar file then compress it. I split the compression as a separate rule because I just thought 'git archive' supported only gzip. For other compression algorithms, I could pipe the two commands: $ git archive HEAD | xz > linux.tar.xz I read git-archive(1) carefully, and I realized GIT had provided a more elegant way: $ git -c tar.tar.xz.command=xz archive -o linux.tar.xz HEAD This commit uses 'tar.tar.*.command' configuration to specify the compression backend so we can compress a source tarball on-the-fly. GIT commit 767cf4579f0e ("archive: implement configurable tar filters") is more than a decade old, so it should be available on almost all build environments. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2023-04-07 10:16:28 +00:00
$(linux-tarballs): .tmp_HEAD FORCE
kbuild: merge cmd_archive_linux and cmd_archive_perf The two commands, cmd_archive_linux and cmd_archive_perf, are similar. Merge them to make it easier to add more changes to the git-archive command. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2023-04-07 10:16:27 +00:00
$(call if_changed,archive)
kbuild: deb-pkg: create source package without cleaning If you run 'make deb-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, *.diff.gz contained some check-in files such as .clang-format, .cocciconfig. With this commit, *.diff.gz will only contain the .config and debian/. The other source files will go into the .orig tarball. linux.tar.gz is rebuilt only when the source files that would go into the tarball are changed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 01:20:24 +00:00
kbuild: rpm-pkg: refactor *rpm-pkg targets Merge the similar build targets. Also, make the output location consistent. Previously, source packages were created in the build directory, while binary packages under ~/rpmbuild/RPMS/. Now, Kbuild creates the rpmbuild/ directory in the build directory, and saves all packages under it. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-22 04:48:05 +00:00
# rpm-pkg srcrpm-pkg binrpm-pkg
kbuild: replace PHONY with FORCE .PHONY: does not take patterns so use FORCE to achive same effect. Thanks to "Paul D. Smith" <psmith@gnu.org> for noticing this. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-03-08 17:39:05 +00:00
# ---------------------------------------------------------------------------
kbuild: add ability to make source rpm buildable using koji Changes: - added new target 'srcrpm-pkg' to generate source rpm - added required build tools to spec file - removed locally compiled host tools to force their re-compile Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Íñigo Huguet <ihuguet@redhat.com> Tested-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-11-21 14:48:45 +00:00
kbuild: rpm-pkg: refactor *rpm-pkg targets Merge the similar build targets. Also, make the output location consistent. Previously, source packages were created in the build directory, while binary packages under ~/rpmbuild/RPMS/. Now, Kbuild creates the rpmbuild/ directory in the build directory, and saves all packages under it. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-22 04:48:05 +00:00
quiet_cmd_mkspec = GEN $@
kbuild: rpm-pkg: generate kernel.spec in rpmbuild/SPECS/ kernel.spec is the last piece that resides outside the rpmbuild/ directory. Move all the RPM-related files to rpmbuild/ consistently. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org>
2023-09-30 10:38:47 +00:00
cmd_mkspec = $(srctree)/scripts/package/mkspec $@
kbuild: rpm-pkg: refactor *rpm-pkg targets Merge the similar build targets. Also, make the output location consistent. Previously, source packages were created in the build directory, while binary packages under ~/rpmbuild/RPMS/. Now, Kbuild creates the rpmbuild/ directory in the build directory, and saves all packages under it. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-22 04:48:05 +00:00
kbuild: rpm-pkg: generate kernel.spec in rpmbuild/SPECS/ kernel.spec is the last piece that resides outside the rpmbuild/ directory. Move all the RPM-related files to rpmbuild/ consistently. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org>
2023-09-30 10:38:47 +00:00
rpmbuild/SPECS/kernel.spec: FORCE
kbuild: rpm-pkg: refactor *rpm-pkg targets Merge the similar build targets. Also, make the output location consistent. Previously, source packages were created in the build directory, while binary packages under ~/rpmbuild/RPMS/. Now, Kbuild creates the rpmbuild/ directory in the build directory, and saves all packages under it. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-22 04:48:05 +00:00
$(call cmd,mkspec)
PHONY += rpm-sources
rpm-sources: linux.tar.gz
$(Q)mkdir -p rpmbuild/SOURCES
$(Q)ln -f linux.tar.gz rpmbuild/SOURCES/linux.tar.gz
$(Q)cp $(KCONFIG_CONFIG) rpmbuild/SOURCES/config
$(Q)$(srctree)/scripts/package/gen-diff-patch rpmbuild/SOURCES/diff.patch
PHONY += rpm-pkg srcrpm-pkg binrpm-pkg
rpm-pkg: private build-type := a
srcrpm-pkg: private build-type := s
binrpm-pkg: private build-type := b
rpm-pkg srcrpm-pkg: rpm-sources
kbuild: rpm-pkg: generate kernel.spec in rpmbuild/SPECS/ kernel.spec is the last piece that resides outside the rpmbuild/ directory. Move all the RPM-related files to rpmbuild/ consistently. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org>
2023-09-30 10:38:47 +00:00
rpm-pkg srcrpm-pkg binrpm-pkg: rpmbuild/SPECS/kernel.spec
+$(strip rpmbuild -b$(build-type) rpmbuild/SPECS/kernel.spec \
kbuild: rpm-pkg: refactor *rpm-pkg targets Merge the similar build targets. Also, make the output location consistent. Previously, source packages were created in the build directory, while binary packages under ~/rpmbuild/RPMS/. Now, Kbuild creates the rpmbuild/ directory in the build directory, and saves all packages under it. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-22 04:48:05 +00:00
--define='_topdir $(abspath rpmbuild)' \
$(if $(filter a b, $(build-type)), \
kbuild: rpm-pkg: skip build dependency check on non-rpm systems Commit 8818039f959b ("kbuild: add ability to make source rpm buildable using koji") added the BuildRequires: field. Checking the build dependency is fine, but one annoyance is that 'make (bin)rpm-pkg' fails on non-rpm systems [1]. For example, Debian provides rpmbuild via 'apt install rpm', but of course cannot meet the requirement listed in the BuildRequires: field. It is possible to pass RPMOPTS=--nodeps to work around it, but it is reasonable to do it automatically. If 'rpm -q rpm' fails, it is not an RPM-managed system. (The command 'rpm' is not installed at all, or was installed by other means.) In that case, pass --nodeps to skip the build dependency check. [1]: https://lore.kernel.org/linux-kbuild/Y6mkdYQYmjUz7bqV@li-4a3a4a4c-28e5-11b2-a85c-a8d192c6f089.ibm.com/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-22 04:48:06 +00:00
--target $(UTS_MACHINE)-linux --build-in-place --noprep --define='_smp_mflags %{nil}' \
$$(rpm -q rpm >/dev/null 2>&1 || echo --nodeps)) \
kbuild: rpm-pkg: refactor *rpm-pkg targets Merge the similar build targets. Also, make the output location consistent. Previously, source packages were created in the build directory, while binary packages under ~/rpmbuild/RPMS/. Now, Kbuild creates the rpmbuild/ directory in the build directory, and saves all packages under it. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-22 04:48:05 +00:00
$(RPMOPTS))
kbuild: rpm-pkg: keep spec file until make mrproper If build fails during (bin)rpm-pkg, the spec file is not cleaned by anyone until the next successful build of the package. We do not have to immediately delete the spec file in case somebody may want to take a look at it. Instead, make them ignored by git, and cleaned up by make mrproper. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:10 +00:00
kbuild: add srcdeb-pkg target This new target builds only the debian source package. Unify the build rules of deb-pkg, srcdeb-pkg, bindeb-pkg to avoid code duplication. --no-check-builddeps is added to srcdeb-pkg so that build dependencies will not be checked. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-17 14:25:47 +00:00
# deb-pkg srcdeb-pkg bindeb-pkg
# ---------------------------------------------------------------------------
kbuild: deb-pkg: add KDEB_SOURCE_COMPRESS to specify source compression Add KDEB_SOURCE_COMPRESS to specify the compression for the orig and debian tarballs. (cf. the existing KDEB_COMPRESS is used to specify the compression for binary packages.) Supported algorithms are gzip, bzip2, lzma, and xz, all of which are supported by dpkg-source. The current default is gzip. You can change it via the environment variable, for example, 'KDEB_SOURCE_COMPRESS=xz make deb-pkg'. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-17 14:25:48 +00:00
KDEB_SOURCE_COMPRESS ?= gzip
supported-deb-source-compress := gzip bzip2 lzma xz
PHONY += linux.tar.unsupported-deb-src-compress
linux.tar.unsupported-deb-src-compress:
@echo "error: KDEB_SOURCE_COMPRESS=$(KDEB_SOURCE_COMPRESS) is not supported. The supported values are: $(supported-deb-source-compress)" >&2
@false
debian-orig-suffix := \
$(strip $(if $(filter $(supported-deb-source-compress), $(KDEB_SOURCE_COMPRESS)), \
$(suffix-$(KDEB_SOURCE_COMPRESS)),.unsupported-deb-src-compress))
kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile scripts/Makefile.package does not need to know the value of KDEB_SOURCENAME because the source name can be taken from debian/changelog by using dpkg-parsechangelog. Move the default of KDEB_SOURCENAME (i.e. linux-upstream) to scripts/package/mkdebian. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 01:20:27 +00:00
quiet_cmd_debianize = GEN $@
kbuild: give up untracked files for source package builds When the source tree is dirty and contains untracked files, package builds may fail, for example, when a broken symlink exists, a file path contains whitespaces, etc. Since commit 05e96e96a315 ("kbuild: use git-archive for source package creation"), the source tarball only contains committed files because it is created by 'git archive'. scripts/package/gen-diff-patch tries to address the diff from HEAD, but including untracked files by the hand-crafted script introduces more complexity. I wrote a patch [1] to make it work in most cases, but still wonder if this is what we should aim for. To simplify the code, this patch just gives up untracked files. Going forward, it is your responsibility to do 'git add' for what you want in the source package. The script shows a warning just in case you forgot to do so. It should be checked only when building source packages. [1]: https://lore.kernel.org/all/CAK7LNAShbZ56gSh9PrbLnBDYKnjtTkHMoCXeGrhcxMvqXGq9=g@mail.gmail.com/2-0001-kbuild-make-package-builds-more-robust.patch Fixes: 05e96e96a315 ("kbuild: use git-archive for source package creation") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-10 12:09:07 +00:00
cmd_debianize = $(srctree)/scripts/package/mkdebian $(mkdebian-opts)
kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile scripts/Makefile.package does not need to know the value of KDEB_SOURCENAME because the source name can be taken from debian/changelog by using dpkg-parsechangelog. Move the default of KDEB_SOURCENAME (i.e. linux-upstream) to scripts/package/mkdebian. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 01:20:27 +00:00
debian: FORCE
$(call cmd,debianize)
PHONY += debian-orig
debian-orig: private source = $(shell dpkg-parsechangelog -S Source)
debian-orig: private version = $(shell dpkg-parsechangelog -S Version | sed 's/-[^-]*$$//')
kbuild: deb-pkg: add KDEB_SOURCE_COMPRESS to specify source compression Add KDEB_SOURCE_COMPRESS to specify the compression for the orig and debian tarballs. (cf. the existing KDEB_COMPRESS is used to specify the compression for binary packages.) Supported algorithms are gzip, bzip2, lzma, and xz, all of which are supported by dpkg-source. The current default is gzip. You can change it via the environment variable, for example, 'KDEB_SOURCE_COMPRESS=xz make deb-pkg'. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-17 14:25:48 +00:00
debian-orig: private orig-name = $(source)_$(version).orig.tar$(debian-orig-suffix)
kbuild: give up untracked files for source package builds When the source tree is dirty and contains untracked files, package builds may fail, for example, when a broken symlink exists, a file path contains whitespaces, etc. Since commit 05e96e96a315 ("kbuild: use git-archive for source package creation"), the source tarball only contains committed files because it is created by 'git archive'. scripts/package/gen-diff-patch tries to address the diff from HEAD, but including untracked files by the hand-crafted script introduces more complexity. I wrote a patch [1] to make it work in most cases, but still wonder if this is what we should aim for. To simplify the code, this patch just gives up untracked files. Going forward, it is your responsibility to do 'git add' for what you want in the source package. The script shows a warning just in case you forgot to do so. It should be checked only when building source packages. [1]: https://lore.kernel.org/all/CAK7LNAShbZ56gSh9PrbLnBDYKnjtTkHMoCXeGrhcxMvqXGq9=g@mail.gmail.com/2-0001-kbuild-make-package-builds-more-robust.patch Fixes: 05e96e96a315 ("kbuild: use git-archive for source package creation") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-10 12:09:07 +00:00
debian-orig: mkdebian-opts = --need-source
kbuild: deb-pkg: add KDEB_SOURCE_COMPRESS to specify source compression Add KDEB_SOURCE_COMPRESS to specify the compression for the orig and debian tarballs. (cf. the existing KDEB_COMPRESS is used to specify the compression for binary packages.) Supported algorithms are gzip, bzip2, lzma, and xz, all of which are supported by dpkg-source. The current default is gzip. You can change it via the environment variable, for example, 'KDEB_SOURCE_COMPRESS=xz make deb-pkg'. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-17 14:25:48 +00:00
debian-orig: linux.tar$(debian-orig-suffix) debian
kbuild: deb-pkg: make .orig tarball a hard link if possible If '..' belongs to the same filesystem, create a hard link instead of a copy. In most cases, you can save disk space. I do not want to use 'mv' because keeping linux.tar.gz is useful to avoid unneeded rebuilding of the tarball. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 01:20:28 +00:00
$(Q)if [ "$(df --output=target .. 2>/dev/null)" = "$(df --output=target $< 2>/dev/null)" ]; then \
ln -f $< ../$(orig-name); \
else \
cp $< ../$(orig-name); \
fi
kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile scripts/Makefile.package does not need to know the value of KDEB_SOURCENAME because the source name can be taken from debian/changelog by using dpkg-parsechangelog. Move the default of KDEB_SOURCENAME (i.e. linux-upstream) to scripts/package/mkdebian. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 01:20:27 +00:00
kbuild: add srcdeb-pkg target This new target builds only the debian source package. Unify the build rules of deb-pkg, srcdeb-pkg, bindeb-pkg to avoid code duplication. --no-check-builddeps is added to srcdeb-pkg so that build dependencies will not be checked. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-17 14:25:47 +00:00
PHONY += deb-pkg srcdeb-pkg bindeb-pkg
deb-pkg: private build-type := source,binary
srcdeb-pkg: private build-type := source
bindeb-pkg: private build-type := binary
deb-pkg: add source package Make deb-pkg build both source and binary package like make rpm-pkg does. For people who only need binary kernel package, there is now bindeb-pkg target, same target also used to build the .deb files if built from the source package using dpkg-buildpackage. Generated source package will build the same kernel .config than what was available for make deb-pkg. The name of the source package can be set with KDEB_SOURCENAME enviroment variable. The source package is useful for GPL compliance, or for feeding to a automated debian package builder. Cc: Chris J Arges <chris.j.arges@canonical.com> Reviewed-by: maximilian attems <maks@stro.at> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2015-09-02 09:57:24 +00:00
kbuild: add srcdeb-pkg target This new target builds only the debian source package. Unify the build rules of deb-pkg, srcdeb-pkg, bindeb-pkg to avoid code duplication. --no-check-builddeps is added to srcdeb-pkg so that build dependencies will not be checked. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-17 14:25:47 +00:00
deb-pkg srcdeb-pkg: debian-orig
kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile scripts/Makefile.package does not need to know the value of KDEB_SOURCENAME because the source name can be taken from debian/changelog by using dpkg-parsechangelog. Move the default of KDEB_SOURCENAME (i.e. linux-upstream) to scripts/package/mkdebian. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 01:20:27 +00:00
bindeb-pkg: debian
kbuild: add srcdeb-pkg target This new target builds only the debian source package. Unify the build rules of deb-pkg, srcdeb-pkg, bindeb-pkg to avoid code duplication. --no-check-builddeps is added to srcdeb-pkg so that build dependencies will not be checked. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-17 14:25:47 +00:00
deb-pkg srcdeb-pkg bindeb-pkg:
+$(strip dpkg-buildpackage \
--build=$(build-type) --no-pre-clean --unsigned-changes \
$(if $(findstring source, $(build-type)), \
kbuild: deb-pkg: add KDEB_SOURCE_COMPRESS to specify source compression Add KDEB_SOURCE_COMPRESS to specify the compression for the orig and debian tarballs. (cf. the existing KDEB_COMPRESS is used to specify the compression for binary packages.) Supported algorithms are gzip, bzip2, lzma, and xz, all of which are supported by dpkg-source. The current default is gzip. You can change it via the environment variable, for example, 'KDEB_SOURCE_COMPRESS=xz make deb-pkg'. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-17 14:25:48 +00:00
--unsigned-source --compression=$(KDEB_SOURCE_COMPRESS)) \
kbuild: add srcdeb-pkg target This new target builds only the debian source package. Unify the build rules of deb-pkg, srcdeb-pkg, bindeb-pkg to avoid code duplication. --no-check-builddeps is added to srcdeb-pkg so that build dependencies will not be checked. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-17 14:25:47 +00:00
$(if $(findstring binary, $(build-type)), \
kbuild: deb-pkg: remove the fakeroot builds support In 2017, the dpkg suite introduced the rootless builds support with the following commits: - 2436807c87b0 ("dpkg-deb: Add support for rootless builds") - fca1bfe84068 ("dpkg-buildpackage: Add support for rootless builds") This feature is available in the default dpkg on Debian 10 and Ubuntu 20.04. Remove the old method. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-11-28 23:53:56 +00:00
-R'$(MAKE) -f debian/rules' -j1 -a$$(cat debian/arch), \
kbuild: add srcdeb-pkg target This new target builds only the debian source package. Unify the build rules of deb-pkg, srcdeb-pkg, bindeb-pkg to avoid code duplication. --no-check-builddeps is added to srcdeb-pkg so that build dependencies will not be checked. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-17 14:25:47 +00:00
--no-check-builddeps) \
$(DPKG_FLAGS))
kbuild: deb-pkg: split generating packaging and build Move debian/ directory generation out of builddeb to a new script, mkdebian. The package build commands are kept in builddeb, which is now an internal command called from debian/rules. With these changes in place, we can now use dpkg-buildpackage from deb-pkg and bindeb-pkg removing need for handrolled source/changes generation. This patch is based on the criticism of the current state of builddeb discussed on: https://patchwork.kernel.org/patch/9656403/ Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-05 11:22:29 +00:00
scripts/package: snap-pkg target Following in footsteps of other targets like 'deb-pkg, 'rpm-pkg' and 'tar-pkg', this patch adds a 'snap-pkg' target for the creation of a Linux kernel snap package using the kbuild infrastructure. A snap, in its general form, is a self contained, sandboxed, universal package and it is intended to work across multiple distributions and/or devices. A snap package is distributed as a single compressed squashfs filesystem. A kernel snap is a snap package carrying the Linux kernel, kernel modules, accessory files (DTBs, System.map, etc) and a manifesto file. The purpose of a kernel snap is to carry the Linux kernel during the creation of a system image, eg. Ubuntu Core, and its subsequent upgrades. For more information on snap packages: https://snapcraft.io/docs/ Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-27 11:07:34 +00:00
# snap-pkg
# ---------------------------------------------------------------------------
kbuild: pkg: add package targets to PHONY instead of FORCE These are not real targets. Adding them to PHONY is preferred. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-21 07:02:03 +00:00
PHONY += snap-pkg
snap-pkg:
scripts/package: snap-pkg target Following in footsteps of other targets like 'deb-pkg, 'rpm-pkg' and 'tar-pkg', this patch adds a 'snap-pkg' target for the creation of a Linux kernel snap package using the kbuild infrastructure. A snap, in its general form, is a self contained, sandboxed, universal package and it is intended to work across multiple distributions and/or devices. A snap package is distributed as a single compressed squashfs filesystem. A kernel snap is a snap package carrying the Linux kernel, kernel modules, accessory files (DTBs, System.map, etc) and a manifesto file. The purpose of a kernel snap is to carry the Linux kernel during the creation of a system image, eg. Ubuntu Core, and its subsequent upgrades. For more information on snap packages: https://snapcraft.io/docs/ Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-27 11:07:34 +00:00
rm -rf $(objtree)/snap
mkdir $(objtree)/snap
$(MAKE) clean
sed "s@KERNELRELEASE@$(KERNELRELEASE)@; \
kbuild: unexport abs_srctree and abs_objtree Commit 25b146c5b8ce ("kbuild: allow Kbuild to start from any directory") exported abs_srctree and abs_objtree to avoid recomputation after the sub-make. However, this approach turned out to be fragile. Commit 5fa94ceb793e ("kbuild: set correct abs_srctree and abs_objtree for package builds") moved them above "ifneq ($(sub_make_done),1)", eliminating the need for exporting them. These are only needed in the top Makefile. If an absolute path is required in sub-directories, you can use $(abspath ) or $(realpath ) as needed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2024-03-06 10:42:22 +00:00
s@SRCTREE@$(realpath $(srctree))@" \
scripts/package: snap-pkg target Following in footsteps of other targets like 'deb-pkg, 'rpm-pkg' and 'tar-pkg', this patch adds a 'snap-pkg' target for the creation of a Linux kernel snap package using the kbuild infrastructure. A snap, in its general form, is a self contained, sandboxed, universal package and it is intended to work across multiple distributions and/or devices. A snap package is distributed as a single compressed squashfs filesystem. A kernel snap is a snap package carrying the Linux kernel, kernel modules, accessory files (DTBs, System.map, etc) and a manifesto file. The purpose of a kernel snap is to carry the Linux kernel during the creation of a system image, eg. Ubuntu Core, and its subsequent upgrades. For more information on snap packages: https://snapcraft.io/docs/ Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-27 11:07:34 +00:00
$(srctree)/scripts/package/snapcraft.template > \
$(objtree)/snap/snapcraft.yaml
cd $(objtree)/snap && \
snapcraft --target-arch=$(UTS_MACHINE)
kbuild: tar-pkg: use tar rules in scripts/Makefile.package Use %.tar, %.tar.gz, %.tar.bz2, %.tar.xz, %.tar.zst rules in scripts/Makefile.package. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 01:20:31 +00:00
# dir-pkg tar*-pkg - tarball targets
[PATCH] kbuild: create tarballs It adds tarball packaging, which I prefer for distribution. Also one of the two blanks after @echo is removed. One seems to be enough :) Signed-off-by: Jan-Benedict Glaw <jbglaw@lug-owl.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-05-24 09:27:37 +00:00
# ---------------------------------------------------------------------------
kbuild: tar-pkg: use tar rules in scripts/Makefile.package Use %.tar, %.tar.gz, %.tar.bz2, %.tar.xz, %.tar.zst rules in scripts/Makefile.package. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 01:20:31 +00:00
tar-install: FORCE
$(Q)$(MAKE) -f $(srctree)/Makefile
+$(Q)$(srctree)/scripts/package/buildtar $@
kbuild: do not create intermediate *.tar for tar packages Commit 05e96e96a315 ("kbuild: use git-archive for source package creation") split the compression as a separate step to factor out the common build rules. With the previous commit, we got back to the situation where source tarballs are compressed on-the-fly. There is no reason to keep the separate compression rules. Generate the comressed tar packages directly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2023-04-07 10:16:29 +00:00
compress-tar.gz = -I "$(KGZIP)"
compress-tar.bz2 = -I "$(KBZIP2)"
compress-tar.xz = -I "$(XZ)"
compress-tar.zst = -I "$(ZSTD)"
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
quiet_cmd_tar = TAR $@
kbuild: do not create intermediate *.tar for tar packages Commit 05e96e96a315 ("kbuild: use git-archive for source package creation") split the compression as a separate step to factor out the common build rules. With the previous commit, we got back to the situation where source tarballs are compressed on-the-fly. There is no reason to keep the separate compression rules. Generate the comressed tar packages directly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2023-04-07 10:16:29 +00:00
cmd_tar = cd $<; tar cf ../$@ $(compress-tar$(suffix $@)) --owner=root --group=root --sort=name *
dir-tarballs := $(addprefix linux-$(KERNELRELEASE)-$(ARCH), .tar .tar.gz .tar.bz2 .tar.xz .tar.zst)
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
kbuild: do not create intermediate *.tar for tar packages Commit 05e96e96a315 ("kbuild: use git-archive for source package creation") split the compression as a separate step to factor out the common build rules. With the previous commit, we got back to the situation where source tarballs are compressed on-the-fly. There is no reason to keep the separate compression rules. Generate the comressed tar packages directly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2023-04-07 10:16:29 +00:00
$(dir-tarballs): tar-install
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
$(call cmd,tar)
kbuild: tar-pkg: use tar rules in scripts/Makefile.package Use %.tar, %.tar.gz, %.tar.bz2, %.tar.xz, %.tar.zst rules in scripts/Makefile.package. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 01:20:31 +00:00
PHONY += dir-pkg
dir-pkg: tar-install
@echo "Kernel tree successfully created in $<"
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
PHONY += tar-pkg
tar-pkg: linux-$(KERNELRELEASE)-$(ARCH).tar
kbuild: tar-pkg: use tar rules in scripts/Makefile.package Use %.tar, %.tar.gz, %.tar.bz2, %.tar.xz, %.tar.zst rules in scripts/Makefile.package. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 01:20:31 +00:00
@:
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
tar%-pkg: linux-$(KERNELRELEASE)-$(ARCH).tar.% FORCE
@:
[PATCH] kbuild: create tarballs It adds tarball packaging, which I prefer for distribution. Also one of the two blanks after @echo is removed. One seems to be enough :) Signed-off-by: Jan-Benedict Glaw <jbglaw@lug-owl.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-05-24 09:27:37 +00:00
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 01:20:30 +00:00
# perf-tar*-src-pkg - generate a source tarball with perf source
perf tools: Make target to generate self contained source tarball Useful for when people want to try some version of the perf tools and don't wants to download the kernel tarball. Here is a session using this new target: [root@emilia linux-2.6-tip]# make help | grep -i perf perf-tar-src-pkg - Build perf-2.6.35-rc1.tar source tarball perf-targz-src-pkg - Build perf-2.6.35-rc1.tar.gz source tarball perf-tarbz2-src-pkg - Build perf-2.6.35-rc1.tar.bz2 source tarball [root@emilia linux-2.6-tip]# make perf-tarbz2-src-pkg TAR [root@emilia linux-2.6-tip]# ls -la perf-2.6.35-rc1.tar.bz2 -rw-r--r-- 1 root root 295731 May 31 11:18 perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# tar xf perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# cd perf-2.6.35-rc1 [root@emilia perf-2.6.35-rc1]# ls arch HEAD include lib tools [root@emilia perf-2.6.35-rc1]# cd tools/perf [root@emilia perf]# make -j9 2>&1 | tail CC arch/x86/util/dwarf-regs.o CC util/probe-finder.o CC util/newt.o CC util/scripting-engines/trace-event-perl.o CC scripts/perl/Perf-Trace-Util/Context.o CC perf.o CC builtin-help.o AR libperf.a LINK perf rm .perf.dev.null [root@emilia perf]# ./perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.262 MB perf.data (~11457 samples) ] [root@emilia perf]# ./perf report | head -12 # Events: 6K cycles # # Overhead Command Shared Object Symbol # ........ ............... .................. ...... # 4.73% perf [kernel.kallsyms] [k] format_decode 4.49% perf libc-2.12.so [.] _IO_file_underflow_internal 4.38% init [kernel.kallsyms] [k] mwait_idle 3.29% perf [kernel.kallsyms] [k] vsnprintf 2.38% init [kernel.kallsyms] [k] sched_clock_local 2.35% init [kernel.kallsyms] [k] apic_timer_interrupt 1.86% sirq-timer/5 [kernel.kallsyms] [k] find_busiest_group [root@emilia perf]# Acked-by: Michal Marek <mmarek@suse.cz> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Michal Marek <mmarek@suse.cz> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100528185357.GA28009@ghostprotocols.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-31 14:13:21 +00:00
# ---------------------------------------------------------------------------
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
.tmp_perf:
$(Q)mkdir .tmp_perf
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 01:20:30 +00:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
.tmp_perf/HEAD: .tmp_HEAD | .tmp_perf
$(call cmd,copy)
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 01:20:30 +00:00
quiet_cmd_perf_version_file = GEN $@
cmd_perf_version_file = cd $(srctree)/tools/perf; util/PERF-VERSION-GEN $(dir $(abspath $@))
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
# PERF-VERSION-FILE and .tmp_HEAD are independent, but this avoids updating the
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 01:20:30 +00:00
# timestamp of PERF-VERSION-FILE.
# The best is to fix tools/perf/util/PERF-VERSION-GEN.
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
.tmp_perf/PERF-VERSION-FILE: .tmp_HEAD $(srctree)/tools/perf/util/PERF-VERSION-GEN | .tmp_perf
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 01:20:30 +00:00
$(call cmd,perf_version_file)
kbuild: merge cmd_archive_linux and cmd_archive_perf The two commands, cmd_archive_linux and cmd_archive_perf, are similar. Merge them to make it easier to add more changes to the git-archive command. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2023-04-07 10:16:27 +00:00
perf-archive-args = --add-file=$$(realpath $(word 2, $^)) \
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
--add-file=$$(realpath $(word 3, $^)) \
$$(cat $(word 2, $^))^{tree} $$(cat $<)
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 01:20:30 +00:00
kbuild: do not create intermediate *.tar for source tarballs Since commit 05e96e96a315 ("kbuild: use git-archive for source package creation"), a source tarball is created in two steps; create *.tar file then compress it. I split the compression as a separate rule because I just thought 'git archive' supported only gzip. For other compression algorithms, I could pipe the two commands: $ git archive HEAD | xz > linux.tar.xz I read git-archive(1) carefully, and I realized GIT had provided a more elegant way: $ git -c tar.tar.xz.command=xz archive -o linux.tar.xz HEAD This commit uses 'tar.tar.*.command' configuration to specify the compression backend so we can compress a source tarball on-the-fly. GIT commit 767cf4579f0e ("archive: implement configurable tar filters") is more than a decade old, so it should be available on almost all build environments. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2023-04-07 10:16:28 +00:00
perf-tarballs := $(addprefix perf-$(KERNELVERSION), .tar .tar.gz .tar.bz2 .tar.xz .tar.zst)
targets += $(perf-tarballs)
kbuild: use proper prefix for tarballs to fix rpm-pkg build error Since commit f8d94c4e403c ("kbuild: do not create intermediate *.tar for source tarballs"), 'make rpm-pkg' fails because the prefix of the source tarball is 'linux.tar/' instead of 'linux/'. $(basename $@) strips only '.gz' from the filename linux.tar.gz. You need to strip two suffixes from compressed tarballs and one suffix from uncompressed tarballs (for example 'perf-6.3.0.tar' generated by 'make perf-tar-src-pkg'). One tricky fix might be --prefix=$(firstword $(subst .tar, ,$@))/ but I think it is better to hard-code the prefix. Fixes: f8d94c4e403c ("kbuild: do not create intermediate *.tar for source tarballs") Reported-by: Jiwei Sun <sunjw10@lenovo.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-19 17:04:24 +00:00
$(perf-tarballs): archive-args = --prefix=perf-$(KERNELVERSION)/ $(perf-archive-args)
kbuild: do not create intermediate *.tar for source tarballs Since commit 05e96e96a315 ("kbuild: use git-archive for source package creation"), a source tarball is created in two steps; create *.tar file then compress it. I split the compression as a separate rule because I just thought 'git archive' supported only gzip. For other compression algorithms, I could pipe the two commands: $ git archive HEAD | xz > linux.tar.xz I read git-archive(1) carefully, and I realized GIT had provided a more elegant way: $ git -c tar.tar.xz.command=xz archive -o linux.tar.xz HEAD This commit uses 'tar.tar.*.command' configuration to specify the compression backend so we can compress a source tarball on-the-fly. GIT commit 767cf4579f0e ("archive: implement configurable tar filters") is more than a decade old, so it should be available on almost all build environments. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2023-04-07 10:16:28 +00:00
$(perf-tarballs): tools/perf/MANIFEST .tmp_perf/HEAD .tmp_perf/PERF-VERSION-FILE FORCE
kbuild: merge cmd_archive_linux and cmd_archive_perf The two commands, cmd_archive_linux and cmd_archive_perf, are similar. Merge them to make it easier to add more changes to the git-archive command. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2023-04-07 10:16:27 +00:00
$(call if_changed,archive)
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
PHONY += perf-tar-src-pkg
perf-tar-src-pkg: perf-$(KERNELVERSION).tar
@:
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 01:20:30 +00:00
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
perf-tar%-src-pkg: perf-$(KERNELVERSION).tar.% FORCE
@:
perf tools: Make target to generate self contained source tarball Useful for when people want to try some version of the perf tools and don't wants to download the kernel tarball. Here is a session using this new target: [root@emilia linux-2.6-tip]# make help | grep -i perf perf-tar-src-pkg - Build perf-2.6.35-rc1.tar source tarball perf-targz-src-pkg - Build perf-2.6.35-rc1.tar.gz source tarball perf-tarbz2-src-pkg - Build perf-2.6.35-rc1.tar.bz2 source tarball [root@emilia linux-2.6-tip]# make perf-tarbz2-src-pkg TAR [root@emilia linux-2.6-tip]# ls -la perf-2.6.35-rc1.tar.bz2 -rw-r--r-- 1 root root 295731 May 31 11:18 perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# tar xf perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# cd perf-2.6.35-rc1 [root@emilia perf-2.6.35-rc1]# ls arch HEAD include lib tools [root@emilia perf-2.6.35-rc1]# cd tools/perf [root@emilia perf]# make -j9 2>&1 | tail CC arch/x86/util/dwarf-regs.o CC util/probe-finder.o CC util/newt.o CC util/scripting-engines/trace-event-perl.o CC scripts/perl/Perf-Trace-Util/Context.o CC perf.o CC builtin-help.o AR libperf.a LINK perf rm .perf.dev.null [root@emilia perf]# ./perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.262 MB perf.data (~11457 samples) ] [root@emilia perf]# ./perf report | head -12 # Events: 6K cycles # # Overhead Command Shared Object Symbol # ........ ............... .................. ...... # 4.73% perf [kernel.kallsyms] [k] format_decode 4.49% perf libc-2.12.so [.] _IO_file_underflow_internal 4.38% init [kernel.kallsyms] [k] mwait_idle 3.29% perf [kernel.kallsyms] [k] vsnprintf 2.38% init [kernel.kallsyms] [k] sched_clock_local 2.35% init [kernel.kallsyms] [k] apic_timer_interrupt 1.86% sirq-timer/5 [kernel.kallsyms] [k] find_busiest_group [root@emilia perf]# Acked-by: Michal Marek <mmarek@suse.cz> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Michal Marek <mmarek@suse.cz> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100528185357.GA28009@ghostprotocols.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-31 14:13:21 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# Help text displayed when executing 'make help'
# ---------------------------------------------------------------------------
kbuild: pkg: add package targets to PHONY instead of FORCE These are not real targets. Adding them to PHONY is preferred. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-21 07:02:03 +00:00
PHONY += help
help:
perf tools: Make target to generate self contained source tarball Useful for when people want to try some version of the perf tools and don't wants to download the kernel tarball. Here is a session using this new target: [root@emilia linux-2.6-tip]# make help | grep -i perf perf-tar-src-pkg - Build perf-2.6.35-rc1.tar source tarball perf-targz-src-pkg - Build perf-2.6.35-rc1.tar.gz source tarball perf-tarbz2-src-pkg - Build perf-2.6.35-rc1.tar.bz2 source tarball [root@emilia linux-2.6-tip]# make perf-tarbz2-src-pkg TAR [root@emilia linux-2.6-tip]# ls -la perf-2.6.35-rc1.tar.bz2 -rw-r--r-- 1 root root 295731 May 31 11:18 perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# tar xf perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# cd perf-2.6.35-rc1 [root@emilia perf-2.6.35-rc1]# ls arch HEAD include lib tools [root@emilia perf-2.6.35-rc1]# cd tools/perf [root@emilia perf]# make -j9 2>&1 | tail CC arch/x86/util/dwarf-regs.o CC util/probe-finder.o CC util/newt.o CC util/scripting-engines/trace-event-perl.o CC scripts/perl/Perf-Trace-Util/Context.o CC perf.o CC builtin-help.o AR libperf.a LINK perf rm .perf.dev.null [root@emilia perf]# ./perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.262 MB perf.data (~11457 samples) ] [root@emilia perf]# ./perf report | head -12 # Events: 6K cycles # # Overhead Command Shared Object Symbol # ........ ............... .................. ...... # 4.73% perf [kernel.kallsyms] [k] format_decode 4.49% perf libc-2.12.so [.] _IO_file_underflow_internal 4.38% init [kernel.kallsyms] [k] mwait_idle 3.29% perf [kernel.kallsyms] [k] vsnprintf 2.38% init [kernel.kallsyms] [k] sched_clock_local 2.35% init [kernel.kallsyms] [k] apic_timer_interrupt 1.86% sirq-timer/5 [kernel.kallsyms] [k] find_busiest_group [root@emilia perf]# Acked-by: Michal Marek <mmarek@suse.cz> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Michal Marek <mmarek@suse.cz> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100528185357.GA28009@ghostprotocols.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-31 14:13:21 +00:00
@echo ' rpm-pkg - Build both source and binary RPM kernel packages'
kbuild: add a missing line for help message The help message line for building the source RPM package was missing. Added it. Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-12-27 09:21:57 +00:00
@echo ' srcrpm-pkg - Build only the source kernel RPM package'
deb-pkg: add source package Make deb-pkg build both source and binary package like make rpm-pkg does. For people who only need binary kernel package, there is now bindeb-pkg target, same target also used to build the .deb files if built from the source package using dpkg-buildpackage. Generated source package will build the same kernel .config than what was available for make deb-pkg. The name of the source package can be set with KDEB_SOURCENAME enviroment variable. The source package is useful for GPL compliance, or for feeding to a automated debian package builder. Cc: Chris J Arges <chris.j.arges@canonical.com> Reviewed-by: maximilian attems <maks@stro.at> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2015-09-02 09:57:24 +00:00
@echo ' binrpm-pkg - Build only the binary kernel RPM package'
@echo ' deb-pkg - Build both source and binary deb kernel packages'
kbuild: add srcdeb-pkg target This new target builds only the debian source package. Unify the build rules of deb-pkg, srcdeb-pkg, bindeb-pkg to avoid code duplication. --no-check-builddeps is added to srcdeb-pkg so that build dependencies will not be checked. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-04-17 14:25:47 +00:00
@echo ' srcdeb-pkg - Build only the source kernel deb package'
deb-pkg: add source package Make deb-pkg build both source and binary package like make rpm-pkg does. For people who only need binary kernel package, there is now bindeb-pkg target, same target also used to build the .deb files if built from the source package using dpkg-buildpackage. Generated source package will build the same kernel .config than what was available for make deb-pkg. The name of the source package can be set with KDEB_SOURCENAME enviroment variable. The source package is useful for GPL compliance, or for feeding to a automated debian package builder. Cc: Chris J Arges <chris.j.arges@canonical.com> Reviewed-by: maximilian attems <maks@stro.at> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2015-09-02 09:57:24 +00:00
@echo ' bindeb-pkg - Build only the binary kernel deb package'
kbuild: Wrap long "make help" text lines Some "make help" text lines extend beyond 80 characters. Wrap them before an opening parenthesis, or before 80 characters. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-25 11:52:32 +00:00
@echo ' snap-pkg - Build only the binary kernel snap package'
@echo ' (will connect to external hosts)'
kbuild: Add make dir-pkg build option Add a 'dir-pkg' target which just creates the same directory structures as in tar-pkg, but doesn't package anything. Useful when the user wants to copy the kernel tree on a machine using ssh, rsync or whatever. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-04 13:11:44 +00:00
@echo ' dir-pkg - Build the kernel as a plain directory structure'
perf tools: Make target to generate self contained source tarball Useful for when people want to try some version of the perf tools and don't wants to download the kernel tarball. Here is a session using this new target: [root@emilia linux-2.6-tip]# make help | grep -i perf perf-tar-src-pkg - Build perf-2.6.35-rc1.tar source tarball perf-targz-src-pkg - Build perf-2.6.35-rc1.tar.gz source tarball perf-tarbz2-src-pkg - Build perf-2.6.35-rc1.tar.bz2 source tarball [root@emilia linux-2.6-tip]# make perf-tarbz2-src-pkg TAR [root@emilia linux-2.6-tip]# ls -la perf-2.6.35-rc1.tar.bz2 -rw-r--r-- 1 root root 295731 May 31 11:18 perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# tar xf perf-2.6.35-rc1.tar.bz2 [root@emilia linux-2.6-tip]# cd perf-2.6.35-rc1 [root@emilia perf-2.6.35-rc1]# ls arch HEAD include lib tools [root@emilia perf-2.6.35-rc1]# cd tools/perf [root@emilia perf]# make -j9 2>&1 | tail CC arch/x86/util/dwarf-regs.o CC util/probe-finder.o CC util/newt.o CC util/scripting-engines/trace-event-perl.o CC scripts/perl/Perf-Trace-Util/Context.o CC perf.o CC builtin-help.o AR libperf.a LINK perf rm .perf.dev.null [root@emilia perf]# ./perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.262 MB perf.data (~11457 samples) ] [root@emilia perf]# ./perf report | head -12 # Events: 6K cycles # # Overhead Command Shared Object Symbol # ........ ............... .................. ...... # 4.73% perf [kernel.kallsyms] [k] format_decode 4.49% perf libc-2.12.so [.] _IO_file_underflow_internal 4.38% init [kernel.kallsyms] [k] mwait_idle 3.29% perf [kernel.kallsyms] [k] vsnprintf 2.38% init [kernel.kallsyms] [k] sched_clock_local 2.35% init [kernel.kallsyms] [k] apic_timer_interrupt 1.86% sirq-timer/5 [kernel.kallsyms] [k] find_busiest_group [root@emilia perf]# Acked-by: Michal Marek <mmarek@suse.cz> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Michal Marek <mmarek@suse.cz> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100528185357.GA28009@ghostprotocols.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-31 14:13:21 +00:00
@echo ' tar-pkg - Build the kernel as an uncompressed tarball'
@echo ' targz-pkg - Build the kernel as a gzip compressed tarball'
@echo ' tarbz2-pkg - Build the kernel as a bzip2 compressed tarball'
kbuild: Add make tarxz-pkg build option Signed-off-by: Zdenek Kaspar <zkaspar82@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-01-30 11:18:51 +00:00
@echo ' tarxz-pkg - Build the kernel as a xz compressed tarball'
kbuild: Add make tarzst-pkg build option Add tarzst-pkg and perf-tarzst-src-pkg targets to build zstd compressed tarballs. Signed-off-by: Paweł Jasiak <pawel@jasiak.dev> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-10-08 11:37:59 +00:00
@echo ' tarzst-pkg - Build the kernel as a zstd compressed tarball'
kbuild: make perf-tar*-src-pkg work without relying on git Currently, perf-tar*-src-pkg only uses 'git archive', but it is better to make it work without relying on git. The file, HEAD, which saves the commit hash, will be included in the tarball only when the source tree is managed by git. The git tree is more precisely checked; it has been copied from scripts/setlocalversion. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-15 01:20:30 +00:00
@echo ' perf-tar-src-pkg - Build the perf source tarball with no compression'
@echo ' perf-targz-src-pkg - Build the perf source tarball with gzip compression'
@echo ' perf-tarbz2-src-pkg - Build the perf source tarball with bz2 compression'
@echo ' perf-tarxz-src-pkg - Build the perf source tarball with xz compression'
@echo ' perf-tarzst-src-pkg - Build the perf source tarball with zst compression'
kbuild: pkg: rename scripts/package/Makefile to scripts/Makefile.package scripts/package/Makefile does not use $(obj) or $(src) at all. It actually generates files and directories in the top of $(objtree). I do not see much sense in descending into scripts/package/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-21 07:02:04 +00:00
kbuild: deb-pkg: create source package without cleaning If you run 'make deb-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, *.diff.gz contained some check-in files such as .clang-format, .cocciconfig. With this commit, *.diff.gz will only contain the .config and debian/. The other source files will go into the .orig tarball. linux.tar.gz is rebuilt only when the source files that would go into the tarball are changed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-02-15 01:20:24 +00:00
PHONY += FORCE
FORCE:
kbuild: use git-archive for source package creation Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-03-15 15:50:18 +00:00
# Read all saved command lines and dependencies for the $(targets) we
# may be building above, using $(if_changed{,_dep}). As an
# optimization, we don't need to read them if the target does not
# exist, we will rebuild anyway in that case.
existing-targets := $(wildcard $(sort $(targets)))
-include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd)
kbuild: pkg: rename scripts/package/Makefile to scripts/Makefile.package scripts/package/Makefile does not use $(obj) or $(src) at all. It actually generates files and directories in the top of $(objtree). I do not see much sense in descending into scripts/package/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-21 07:02:04 +00:00
.PHONY: $(PHONY)