linux-stable/scripts/decodecode

253 lines
4.9 KiB
Plaintext
Raw Normal View History

scripts/decodecode: improve faulting line determination There are cases where the IP pointer in a Code: line in an oops doesn't point at the beginning of an instruction: Code: 0f bd c2 e9 a0 cd b5 e4 48 0f bd c2 e9 97 cd b5 e4 0f 1f 80 00 00 00 00 \ e9 8b cd b5 e4 0f 1f 00 66 0f a3 d0 e9 7f cd b5 e4 0f 1f <80> 00 00 00 \ 00 0f a3 d0 e9 70 cd b5 e4 48 0f a3 d0 e9 67 cd b5 e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 0f 1f 80 00 00 00 00 nopl 0x0(%rax) ^^ and the current way of determining the faulting instruction line doesn't work because disassembled instructions are counted from the IP byte to the end and when that thing points in the middle, the trailing bytes can be interpreted as different insns: Code starting with the faulting instruction =========================================== 0: 80 00 00 addb $0x0,(%rax) 3: 00 00 add %al,(%rax) whereas, this is part of 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 5: 0f a3 d0 bt %edx,%eax ... leading to: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24:* e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 <-- trapping instruction 29: 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 30: 0f a3 d0 bt %edx,%eax which is the wrong faulting instruction. Change the way the faulting line number is determined by matching the opcode bytes from the beginning, leading to correct output: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24: e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 29:* 0f 1f 80 00 00 00 00 nopl 0x0(%rax) <-- trapping instruction 30: 0f a3 d0 bt %edx,%eax While at it, make decodecode use bash as the interpreter - that thing should be present on everything by now. It simplifies the code a lot too. Link: https://lkml.kernel.org/r/20220808085928.29840-1-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-08 08:59:28 +00:00
#!/bin/bash
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
# SPDX-License-Identifier: GPL-2.0
# Disassemble the Code: line in Linux oopses
# usage: decodecode < oops.file
#
# options: set env. variable AFLAGS=options to pass options to "as";
# e.g., to decode an i386 oops on an x86_64 system, use:
# AFLAGS=--32 decodecode < 386.oops
scripts/decodecode: add the capability to supply the program counter So that comparing with objdump output from vmlinux can ease pinpointing where the trapping instruction actually is. An example is better than a thousand words: $ PC=0xffffffff8329a927 ./scripts/decodecode < ~/tmp/syz/gfs2.splat [ 477.379104][T23917] Code: 48 83 ec 28 48 89 3c 24 48 89 54 24 08 e8 c1 b4 4a fe 48 8d bb 00 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 97 05 00 00 48 8b 9b 00 01 00 00 48 85 db 0f 84 All code ======== ffffffff8329a8fd: 48 83 ec 28 sub $0x28,%rsp ffffffff8329a901: 48 89 3c 24 mov %rdi,(%rsp) ffffffff8329a905: 48 89 54 24 08 mov %rdx,0x8(%rsp) ffffffff8329a90a: e8 c1 b4 4a fe callq 0xffffffff81745dd0 ffffffff8329a90f: 48 8d bb 00 01 00 00 lea 0x100(%rbx),%rdi ffffffff8329a916: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax ffffffff8329a91d: fc ff df ffffffff8329a920: 48 89 fa mov %rdi,%rdx ffffffff8329a923: 48 c1 ea 03 shr $0x3,%rdx ffffffff8329a927:* 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) <-- trapping instruction ffffffff8329a92b: 0f 85 97 05 00 00 jne 0xffffffff8329aec8 ffffffff8329a931: 48 8b 9b 00 01 00 00 mov 0x100(%rbx),%rbx ffffffff8329a938: 48 85 db test %rbx,%rbx ffffffff8329a93b: 0f .byte 0xf ffffffff8329a93c: 84 .byte 0x84 Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marc Zyngier <maz@misterjones.org> Cc: Will Deacon <will@kernel.org> Cc: Rabin Vincent <rabin@rab.in> Link: https://lkml.kernel.org/r/20200930111416.GF6810@zn.tnic Link: https://lkml.kernel.org/r/20200929113238.GC21110@zn.tnic Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 23:48:14 +00:00
# PC=hex - the PC (program counter) the oops points to
scripts/decodecode: improve faulting line determination There are cases where the IP pointer in a Code: line in an oops doesn't point at the beginning of an instruction: Code: 0f bd c2 e9 a0 cd b5 e4 48 0f bd c2 e9 97 cd b5 e4 0f 1f 80 00 00 00 00 \ e9 8b cd b5 e4 0f 1f 00 66 0f a3 d0 e9 7f cd b5 e4 0f 1f <80> 00 00 00 \ 00 0f a3 d0 e9 70 cd b5 e4 48 0f a3 d0 e9 67 cd b5 e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 0f 1f 80 00 00 00 00 nopl 0x0(%rax) ^^ and the current way of determining the faulting instruction line doesn't work because disassembled instructions are counted from the IP byte to the end and when that thing points in the middle, the trailing bytes can be interpreted as different insns: Code starting with the faulting instruction =========================================== 0: 80 00 00 addb $0x0,(%rax) 3: 00 00 add %al,(%rax) whereas, this is part of 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 5: 0f a3 d0 bt %edx,%eax ... leading to: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24:* e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 <-- trapping instruction 29: 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 30: 0f a3 d0 bt %edx,%eax which is the wrong faulting instruction. Change the way the faulting line number is determined by matching the opcode bytes from the beginning, leading to correct output: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24: e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 29:* 0f 1f 80 00 00 00 00 nopl 0x0(%rax) <-- trapping instruction 30: 0f a3 d0 bt %edx,%eax While at it, make decodecode use bash as the interpreter - that thing should be present on everything by now. It simplifies the code a lot too. Link: https://lkml.kernel.org/r/20220808085928.29840-1-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-08 08:59:28 +00:00
faultlinenum=1
cleanup() {
rm -f $T $T.s $T.o $T.oo $T.aa $T.dis
exit 1
}
die() {
echo "$@"
exit 1
}
trap cleanup EXIT
T=`mktemp` || die "cannot create temp file"
code=
cont=
while read i ; do
case "$i" in
*Code:*)
code=$i
cont=yes
;;
*)
[ -n "$cont" ] && {
xdump="$(echo $i | grep '^[[:xdigit:]<>[:space:]]\+$')"
if [ -n "$xdump" ]; then
code="$code $xdump"
else
cont=
fi
}
;;
esac
done
if [ -z "$code" ]; then
rm $T
exit
fi
echo $code
code=`echo $code | sed -e 's/.*Code: //'`
width=`expr index "$code" ' '`
width=$((($width-1)/2))
case $width in
1) type=byte ;;
2) type=2byte ;;
4) type=4byte ;;
esac
if [ -z "$ARCH" ]; then
case `uname -m` in
aarch64*) ARCH=arm64 ;;
arm*) ARCH=arm ;;
loongarch*) ARCH=loongarch ;;
esac
fi
scripts/decodecode: add the capability to supply the program counter So that comparing with objdump output from vmlinux can ease pinpointing where the trapping instruction actually is. An example is better than a thousand words: $ PC=0xffffffff8329a927 ./scripts/decodecode < ~/tmp/syz/gfs2.splat [ 477.379104][T23917] Code: 48 83 ec 28 48 89 3c 24 48 89 54 24 08 e8 c1 b4 4a fe 48 8d bb 00 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 97 05 00 00 48 8b 9b 00 01 00 00 48 85 db 0f 84 All code ======== ffffffff8329a8fd: 48 83 ec 28 sub $0x28,%rsp ffffffff8329a901: 48 89 3c 24 mov %rdi,(%rsp) ffffffff8329a905: 48 89 54 24 08 mov %rdx,0x8(%rsp) ffffffff8329a90a: e8 c1 b4 4a fe callq 0xffffffff81745dd0 ffffffff8329a90f: 48 8d bb 00 01 00 00 lea 0x100(%rbx),%rdi ffffffff8329a916: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax ffffffff8329a91d: fc ff df ffffffff8329a920: 48 89 fa mov %rdi,%rdx ffffffff8329a923: 48 c1 ea 03 shr $0x3,%rdx ffffffff8329a927:* 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) <-- trapping instruction ffffffff8329a92b: 0f 85 97 05 00 00 jne 0xffffffff8329aec8 ffffffff8329a931: 48 8b 9b 00 01 00 00 mov 0x100(%rbx),%rbx ffffffff8329a938: 48 85 db test %rbx,%rbx ffffffff8329a93b: 0f .byte 0xf ffffffff8329a93c: 84 .byte 0x84 Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marc Zyngier <maz@misterjones.org> Cc: Will Deacon <will@kernel.org> Cc: Rabin Vincent <rabin@rab.in> Link: https://lkml.kernel.org/r/20200930111416.GF6810@zn.tnic Link: https://lkml.kernel.org/r/20200929113238.GC21110@zn.tnic Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 23:48:14 +00:00
# Params: (tmp_file, pc_sub)
disas() {
scripts/decodecode: add the capability to supply the program counter So that comparing with objdump output from vmlinux can ease pinpointing where the trapping instruction actually is. An example is better than a thousand words: $ PC=0xffffffff8329a927 ./scripts/decodecode < ~/tmp/syz/gfs2.splat [ 477.379104][T23917] Code: 48 83 ec 28 48 89 3c 24 48 89 54 24 08 e8 c1 b4 4a fe 48 8d bb 00 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 97 05 00 00 48 8b 9b 00 01 00 00 48 85 db 0f 84 All code ======== ffffffff8329a8fd: 48 83 ec 28 sub $0x28,%rsp ffffffff8329a901: 48 89 3c 24 mov %rdi,(%rsp) ffffffff8329a905: 48 89 54 24 08 mov %rdx,0x8(%rsp) ffffffff8329a90a: e8 c1 b4 4a fe callq 0xffffffff81745dd0 ffffffff8329a90f: 48 8d bb 00 01 00 00 lea 0x100(%rbx),%rdi ffffffff8329a916: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax ffffffff8329a91d: fc ff df ffffffff8329a920: 48 89 fa mov %rdi,%rdx ffffffff8329a923: 48 c1 ea 03 shr $0x3,%rdx ffffffff8329a927:* 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) <-- trapping instruction ffffffff8329a92b: 0f 85 97 05 00 00 jne 0xffffffff8329aec8 ffffffff8329a931: 48 8b 9b 00 01 00 00 mov 0x100(%rbx),%rbx ffffffff8329a938: 48 85 db test %rbx,%rbx ffffffff8329a93b: 0f .byte 0xf ffffffff8329a93c: 84 .byte 0x84 Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marc Zyngier <maz@misterjones.org> Cc: Will Deacon <will@kernel.org> Cc: Rabin Vincent <rabin@rab.in> Link: https://lkml.kernel.org/r/20200930111416.GF6810@zn.tnic Link: https://lkml.kernel.org/r/20200929113238.GC21110@zn.tnic Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 23:48:14 +00:00
t=$1
pc_sub=$2
${CROSS_COMPILE}as $AFLAGS -o $t.o $t.s > /dev/null 2>&1
if [ "$ARCH" = "arm" ]; then
if [ $width -eq 2 ]; then
OBJDUMPFLAGS="-M force-thumb"
fi
scripts/decodecode: add the capability to supply the program counter So that comparing with objdump output from vmlinux can ease pinpointing where the trapping instruction actually is. An example is better than a thousand words: $ PC=0xffffffff8329a927 ./scripts/decodecode < ~/tmp/syz/gfs2.splat [ 477.379104][T23917] Code: 48 83 ec 28 48 89 3c 24 48 89 54 24 08 e8 c1 b4 4a fe 48 8d bb 00 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 97 05 00 00 48 8b 9b 00 01 00 00 48 85 db 0f 84 All code ======== ffffffff8329a8fd: 48 83 ec 28 sub $0x28,%rsp ffffffff8329a901: 48 89 3c 24 mov %rdi,(%rsp) ffffffff8329a905: 48 89 54 24 08 mov %rdx,0x8(%rsp) ffffffff8329a90a: e8 c1 b4 4a fe callq 0xffffffff81745dd0 ffffffff8329a90f: 48 8d bb 00 01 00 00 lea 0x100(%rbx),%rdi ffffffff8329a916: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax ffffffff8329a91d: fc ff df ffffffff8329a920: 48 89 fa mov %rdi,%rdx ffffffff8329a923: 48 c1 ea 03 shr $0x3,%rdx ffffffff8329a927:* 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) <-- trapping instruction ffffffff8329a92b: 0f 85 97 05 00 00 jne 0xffffffff8329aec8 ffffffff8329a931: 48 8b 9b 00 01 00 00 mov 0x100(%rbx),%rbx ffffffff8329a938: 48 85 db test %rbx,%rbx ffffffff8329a93b: 0f .byte 0xf ffffffff8329a93c: 84 .byte 0x84 Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marc Zyngier <maz@misterjones.org> Cc: Will Deacon <will@kernel.org> Cc: Rabin Vincent <rabin@rab.in> Link: https://lkml.kernel.org/r/20200930111416.GF6810@zn.tnic Link: https://lkml.kernel.org/r/20200929113238.GC21110@zn.tnic Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 23:48:14 +00:00
${CROSS_COMPILE}strip $t.o
fi
if [ "$ARCH" = "arm64" ]; then
if [ $width -eq 4 ]; then
type=inst
fi
scripts/decodecode: add the capability to supply the program counter So that comparing with objdump output from vmlinux can ease pinpointing where the trapping instruction actually is. An example is better than a thousand words: $ PC=0xffffffff8329a927 ./scripts/decodecode < ~/tmp/syz/gfs2.splat [ 477.379104][T23917] Code: 48 83 ec 28 48 89 3c 24 48 89 54 24 08 e8 c1 b4 4a fe 48 8d bb 00 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 97 05 00 00 48 8b 9b 00 01 00 00 48 85 db 0f 84 All code ======== ffffffff8329a8fd: 48 83 ec 28 sub $0x28,%rsp ffffffff8329a901: 48 89 3c 24 mov %rdi,(%rsp) ffffffff8329a905: 48 89 54 24 08 mov %rdx,0x8(%rsp) ffffffff8329a90a: e8 c1 b4 4a fe callq 0xffffffff81745dd0 ffffffff8329a90f: 48 8d bb 00 01 00 00 lea 0x100(%rbx),%rdi ffffffff8329a916: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax ffffffff8329a91d: fc ff df ffffffff8329a920: 48 89 fa mov %rdi,%rdx ffffffff8329a923: 48 c1 ea 03 shr $0x3,%rdx ffffffff8329a927:* 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) <-- trapping instruction ffffffff8329a92b: 0f 85 97 05 00 00 jne 0xffffffff8329aec8 ffffffff8329a931: 48 8b 9b 00 01 00 00 mov 0x100(%rbx),%rbx ffffffff8329a938: 48 85 db test %rbx,%rbx ffffffff8329a93b: 0f .byte 0xf ffffffff8329a93c: 84 .byte 0x84 Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marc Zyngier <maz@misterjones.org> Cc: Will Deacon <will@kernel.org> Cc: Rabin Vincent <rabin@rab.in> Link: https://lkml.kernel.org/r/20200930111416.GF6810@zn.tnic Link: https://lkml.kernel.org/r/20200929113238.GC21110@zn.tnic Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 23:48:14 +00:00
${CROSS_COMPILE}strip $t.o
fi
if [ "$ARCH" = "riscv" ]; then
OBJDUMPFLAGS="-M no-aliases --section=.text -D"
${CROSS_COMPILE}strip $t.o
fi
if [ "$ARCH" = "loongarch" ]; then
${CROSS_COMPILE}strip $t.o
fi
scripts/decodecode: add the capability to supply the program counter So that comparing with objdump output from vmlinux can ease pinpointing where the trapping instruction actually is. An example is better than a thousand words: $ PC=0xffffffff8329a927 ./scripts/decodecode < ~/tmp/syz/gfs2.splat [ 477.379104][T23917] Code: 48 83 ec 28 48 89 3c 24 48 89 54 24 08 e8 c1 b4 4a fe 48 8d bb 00 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 97 05 00 00 48 8b 9b 00 01 00 00 48 85 db 0f 84 All code ======== ffffffff8329a8fd: 48 83 ec 28 sub $0x28,%rsp ffffffff8329a901: 48 89 3c 24 mov %rdi,(%rsp) ffffffff8329a905: 48 89 54 24 08 mov %rdx,0x8(%rsp) ffffffff8329a90a: e8 c1 b4 4a fe callq 0xffffffff81745dd0 ffffffff8329a90f: 48 8d bb 00 01 00 00 lea 0x100(%rbx),%rdi ffffffff8329a916: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax ffffffff8329a91d: fc ff df ffffffff8329a920: 48 89 fa mov %rdi,%rdx ffffffff8329a923: 48 c1 ea 03 shr $0x3,%rdx ffffffff8329a927:* 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) <-- trapping instruction ffffffff8329a92b: 0f 85 97 05 00 00 jne 0xffffffff8329aec8 ffffffff8329a931: 48 8b 9b 00 01 00 00 mov 0x100(%rbx),%rbx ffffffff8329a938: 48 85 db test %rbx,%rbx ffffffff8329a93b: 0f .byte 0xf ffffffff8329a93c: 84 .byte 0x84 Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marc Zyngier <maz@misterjones.org> Cc: Will Deacon <will@kernel.org> Cc: Rabin Vincent <rabin@rab.in> Link: https://lkml.kernel.org/r/20200930111416.GF6810@zn.tnic Link: https://lkml.kernel.org/r/20200929113238.GC21110@zn.tnic Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 23:48:14 +00:00
if [ $pc_sub -ne 0 ]; then
if [ $PC ]; then
adj_vma=$(( $PC - $pc_sub ))
OBJDUMPFLAGS="$OBJDUMPFLAGS --adjust-vma=$adj_vma"
fi
fi
${CROSS_COMPILE}objdump $OBJDUMPFLAGS -S $t.o | \
grep -v "/tmp\|Disassembly\|\.text\|^$" > $t.dis 2>&1
}
scripts/decodecode: improve faulting line determination There are cases where the IP pointer in a Code: line in an oops doesn't point at the beginning of an instruction: Code: 0f bd c2 e9 a0 cd b5 e4 48 0f bd c2 e9 97 cd b5 e4 0f 1f 80 00 00 00 00 \ e9 8b cd b5 e4 0f 1f 00 66 0f a3 d0 e9 7f cd b5 e4 0f 1f <80> 00 00 00 \ 00 0f a3 d0 e9 70 cd b5 e4 48 0f a3 d0 e9 67 cd b5 e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 0f 1f 80 00 00 00 00 nopl 0x0(%rax) ^^ and the current way of determining the faulting instruction line doesn't work because disassembled instructions are counted from the IP byte to the end and when that thing points in the middle, the trailing bytes can be interpreted as different insns: Code starting with the faulting instruction =========================================== 0: 80 00 00 addb $0x0,(%rax) 3: 00 00 add %al,(%rax) whereas, this is part of 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 5: 0f a3 d0 bt %edx,%eax ... leading to: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24:* e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 <-- trapping instruction 29: 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 30: 0f a3 d0 bt %edx,%eax which is the wrong faulting instruction. Change the way the faulting line number is determined by matching the opcode bytes from the beginning, leading to correct output: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24: e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 29:* 0f 1f 80 00 00 00 00 nopl 0x0(%rax) <-- trapping instruction 30: 0f a3 d0 bt %edx,%eax While at it, make decodecode use bash as the interpreter - that thing should be present on everything by now. It simplifies the code a lot too. Link: https://lkml.kernel.org/r/20220808085928.29840-1-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-08 08:59:28 +00:00
# Match the maximum number of opcode bytes from @op_bytes contained within
# @opline
#
# Params:
# @op_bytes: The string of bytes from the Code: line
# @opline: The disassembled line coming from objdump
#
# Returns:
# The max number of opcode bytes from the beginning of @op_bytes which match
# the opcode bytes in the objdump line.
get_substr_opcode_bytes_num()
{
local op_bytes=$1
local opline=$2
local retval=0
substr=""
for opc in $op_bytes;
do
substr+="$opc"
opcode="$substr"
if [ "$ARCH" = "riscv" ]; then
opcode=$(echo $opcode | tr ' ' '\n' | tac | tr -d '\n')
fi
scripts/decodecode: improve faulting line determination There are cases where the IP pointer in a Code: line in an oops doesn't point at the beginning of an instruction: Code: 0f bd c2 e9 a0 cd b5 e4 48 0f bd c2 e9 97 cd b5 e4 0f 1f 80 00 00 00 00 \ e9 8b cd b5 e4 0f 1f 00 66 0f a3 d0 e9 7f cd b5 e4 0f 1f <80> 00 00 00 \ 00 0f a3 d0 e9 70 cd b5 e4 48 0f a3 d0 e9 67 cd b5 e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 0f 1f 80 00 00 00 00 nopl 0x0(%rax) ^^ and the current way of determining the faulting instruction line doesn't work because disassembled instructions are counted from the IP byte to the end and when that thing points in the middle, the trailing bytes can be interpreted as different insns: Code starting with the faulting instruction =========================================== 0: 80 00 00 addb $0x0,(%rax) 3: 00 00 add %al,(%rax) whereas, this is part of 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 5: 0f a3 d0 bt %edx,%eax ... leading to: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24:* e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 <-- trapping instruction 29: 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 30: 0f a3 d0 bt %edx,%eax which is the wrong faulting instruction. Change the way the faulting line number is determined by matching the opcode bytes from the beginning, leading to correct output: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24: e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 29:* 0f 1f 80 00 00 00 00 nopl 0x0(%rax) <-- trapping instruction 30: 0f a3 d0 bt %edx,%eax While at it, make decodecode use bash as the interpreter - that thing should be present on everything by now. It simplifies the code a lot too. Link: https://lkml.kernel.org/r/20220808085928.29840-1-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-08 08:59:28 +00:00
# return if opcode bytes do not match @opline anymore
if ! echo $opline | grep -q "$opcode";
scripts/decodecode: improve faulting line determination There are cases where the IP pointer in a Code: line in an oops doesn't point at the beginning of an instruction: Code: 0f bd c2 e9 a0 cd b5 e4 48 0f bd c2 e9 97 cd b5 e4 0f 1f 80 00 00 00 00 \ e9 8b cd b5 e4 0f 1f 00 66 0f a3 d0 e9 7f cd b5 e4 0f 1f <80> 00 00 00 \ 00 0f a3 d0 e9 70 cd b5 e4 48 0f a3 d0 e9 67 cd b5 e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 0f 1f 80 00 00 00 00 nopl 0x0(%rax) ^^ and the current way of determining the faulting instruction line doesn't work because disassembled instructions are counted from the IP byte to the end and when that thing points in the middle, the trailing bytes can be interpreted as different insns: Code starting with the faulting instruction =========================================== 0: 80 00 00 addb $0x0,(%rax) 3: 00 00 add %al,(%rax) whereas, this is part of 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 5: 0f a3 d0 bt %edx,%eax ... leading to: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24:* e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 <-- trapping instruction 29: 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 30: 0f a3 d0 bt %edx,%eax which is the wrong faulting instruction. Change the way the faulting line number is determined by matching the opcode bytes from the beginning, leading to correct output: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24: e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 29:* 0f 1f 80 00 00 00 00 nopl 0x0(%rax) <-- trapping instruction 30: 0f a3 d0 bt %edx,%eax While at it, make decodecode use bash as the interpreter - that thing should be present on everything by now. It simplifies the code a lot too. Link: https://lkml.kernel.org/r/20220808085928.29840-1-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-08 08:59:28 +00:00
then
break
fi
# add trailing space
substr+=" "
retval=$((retval+1))
done
return $retval
}
# Return the line number in objdump output to where the IP marker in the Code:
# line points to
#
# Params:
# @all_code: code in bytes without the marker
# @dis_file: disassembled file
# @ip_byte: The byte to which the IP points to
get_faultlinenum()
{
local all_code="$1"
local dis_file="$2"
# num bytes including IP byte
local num_bytes_ip=$(( $3 + 1 * $width ))
# Add the two header lines (we're counting from 1).
local retval=3
# remove marker
all_code=$(echo $all_code | sed -e 's/[<>()]//g')
while read line
do
get_substr_opcode_bytes_num "$all_code" "$line"
ate_opcodes=$?
if ! (( $ate_opcodes )); then
continue
fi
num_bytes_ip=$((num_bytes_ip - ($ate_opcodes * $width) ))
if (( $num_bytes_ip <= 0 )); then
break
fi
# Delete matched opcode bytes from all_code. For that, compute
# how many chars those opcodes are represented by and include
# trailing space.
#
# a byte is 2 chars, ate_opcodes is also the number of trailing
# spaces
del_chars=$(( ($ate_opcodes * $width * 2) + $ate_opcodes ))
all_code=$(echo $all_code | sed -e "s!^.\{$del_chars\}!!")
let "retval+=1"
done < $dis_file
return $retval
}
marker=`expr index "$code" "\<"`
if [ $marker -eq 0 ]; then
marker=`expr index "$code" "\("`
fi
touch $T.oo
if [ $marker -ne 0 ]; then
scripts/decodecode: improve faulting line determination There are cases where the IP pointer in a Code: line in an oops doesn't point at the beginning of an instruction: Code: 0f bd c2 e9 a0 cd b5 e4 48 0f bd c2 e9 97 cd b5 e4 0f 1f 80 00 00 00 00 \ e9 8b cd b5 e4 0f 1f 00 66 0f a3 d0 e9 7f cd b5 e4 0f 1f <80> 00 00 00 \ 00 0f a3 d0 e9 70 cd b5 e4 48 0f a3 d0 e9 67 cd b5 e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 0f 1f 80 00 00 00 00 nopl 0x0(%rax) ^^ and the current way of determining the faulting instruction line doesn't work because disassembled instructions are counted from the IP byte to the end and when that thing points in the middle, the trailing bytes can be interpreted as different insns: Code starting with the faulting instruction =========================================== 0: 80 00 00 addb $0x0,(%rax) 3: 00 00 add %al,(%rax) whereas, this is part of 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 5: 0f a3 d0 bt %edx,%eax ... leading to: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24:* e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 <-- trapping instruction 29: 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 30: 0f a3 d0 bt %edx,%eax which is the wrong faulting instruction. Change the way the faulting line number is determined by matching the opcode bytes from the beginning, leading to correct output: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24: e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 29:* 0f 1f 80 00 00 00 00 nopl 0x0(%rax) <-- trapping instruction 30: 0f a3 d0 bt %edx,%eax While at it, make decodecode use bash as the interpreter - that thing should be present on everything by now. It simplifies the code a lot too. Link: https://lkml.kernel.org/r/20220808085928.29840-1-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-08 08:59:28 +00:00
# How many bytes to subtract from the program counter
# in order to get to the beginning virtual address of the
# Code:
pc_sub=$(( (($marker - 1) / (2 * $width + 1)) * $width ))
echo All code >> $T.oo
echo ======== >> $T.oo
beforemark=`echo "$code"`
echo -n " .$type 0x" > $T.s
scripts/decodecode: improve faulting line determination There are cases where the IP pointer in a Code: line in an oops doesn't point at the beginning of an instruction: Code: 0f bd c2 e9 a0 cd b5 e4 48 0f bd c2 e9 97 cd b5 e4 0f 1f 80 00 00 00 00 \ e9 8b cd b5 e4 0f 1f 00 66 0f a3 d0 e9 7f cd b5 e4 0f 1f <80> 00 00 00 \ 00 0f a3 d0 e9 70 cd b5 e4 48 0f a3 d0 e9 67 cd b5 e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 0f 1f 80 00 00 00 00 nopl 0x0(%rax) ^^ and the current way of determining the faulting instruction line doesn't work because disassembled instructions are counted from the IP byte to the end and when that thing points in the middle, the trailing bytes can be interpreted as different insns: Code starting with the faulting instruction =========================================== 0: 80 00 00 addb $0x0,(%rax) 3: 00 00 add %al,(%rax) whereas, this is part of 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 5: 0f a3 d0 bt %edx,%eax ... leading to: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24:* e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 <-- trapping instruction 29: 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 30: 0f a3 d0 bt %edx,%eax which is the wrong faulting instruction. Change the way the faulting line number is determined by matching the opcode bytes from the beginning, leading to correct output: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24: e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 29:* 0f 1f 80 00 00 00 00 nopl 0x0(%rax) <-- trapping instruction 30: 0f a3 d0 bt %edx,%eax While at it, make decodecode use bash as the interpreter - that thing should be present on everything by now. It simplifies the code a lot too. Link: https://lkml.kernel.org/r/20220808085928.29840-1-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-08 08:59:28 +00:00
echo $beforemark | sed -e 's/ /,0x/g; s/[<>()]//g' >> $T.s
scripts/decodecode: improve faulting line determination There are cases where the IP pointer in a Code: line in an oops doesn't point at the beginning of an instruction: Code: 0f bd c2 e9 a0 cd b5 e4 48 0f bd c2 e9 97 cd b5 e4 0f 1f 80 00 00 00 00 \ e9 8b cd b5 e4 0f 1f 00 66 0f a3 d0 e9 7f cd b5 e4 0f 1f <80> 00 00 00 \ 00 0f a3 d0 e9 70 cd b5 e4 48 0f a3 d0 e9 67 cd b5 e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 0f 1f 80 00 00 00 00 nopl 0x0(%rax) ^^ and the current way of determining the faulting instruction line doesn't work because disassembled instructions are counted from the IP byte to the end and when that thing points in the middle, the trailing bytes can be interpreted as different insns: Code starting with the faulting instruction =========================================== 0: 80 00 00 addb $0x0,(%rax) 3: 00 00 add %al,(%rax) whereas, this is part of 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 5: 0f a3 d0 bt %edx,%eax ... leading to: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24:* e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 <-- trapping instruction 29: 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 30: 0f a3 d0 bt %edx,%eax which is the wrong faulting instruction. Change the way the faulting line number is determined by matching the opcode bytes from the beginning, leading to correct output: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24: e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 29:* 0f 1f 80 00 00 00 00 nopl 0x0(%rax) <-- trapping instruction 30: 0f a3 d0 bt %edx,%eax While at it, make decodecode use bash as the interpreter - that thing should be present on everything by now. It simplifies the code a lot too. Link: https://lkml.kernel.org/r/20220808085928.29840-1-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-08 08:59:28 +00:00
scripts/decodecode: add the capability to supply the program counter So that comparing with objdump output from vmlinux can ease pinpointing where the trapping instruction actually is. An example is better than a thousand words: $ PC=0xffffffff8329a927 ./scripts/decodecode < ~/tmp/syz/gfs2.splat [ 477.379104][T23917] Code: 48 83 ec 28 48 89 3c 24 48 89 54 24 08 e8 c1 b4 4a fe 48 8d bb 00 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 97 05 00 00 48 8b 9b 00 01 00 00 48 85 db 0f 84 All code ======== ffffffff8329a8fd: 48 83 ec 28 sub $0x28,%rsp ffffffff8329a901: 48 89 3c 24 mov %rdi,(%rsp) ffffffff8329a905: 48 89 54 24 08 mov %rdx,0x8(%rsp) ffffffff8329a90a: e8 c1 b4 4a fe callq 0xffffffff81745dd0 ffffffff8329a90f: 48 8d bb 00 01 00 00 lea 0x100(%rbx),%rdi ffffffff8329a916: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax ffffffff8329a91d: fc ff df ffffffff8329a920: 48 89 fa mov %rdi,%rdx ffffffff8329a923: 48 c1 ea 03 shr $0x3,%rdx ffffffff8329a927:* 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) <-- trapping instruction ffffffff8329a92b: 0f 85 97 05 00 00 jne 0xffffffff8329aec8 ffffffff8329a931: 48 8b 9b 00 01 00 00 mov 0x100(%rbx),%rbx ffffffff8329a938: 48 85 db test %rbx,%rbx ffffffff8329a93b: 0f .byte 0xf ffffffff8329a93c: 84 .byte 0x84 Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marc Zyngier <maz@misterjones.org> Cc: Will Deacon <will@kernel.org> Cc: Rabin Vincent <rabin@rab.in> Link: https://lkml.kernel.org/r/20200930111416.GF6810@zn.tnic Link: https://lkml.kernel.org/r/20200929113238.GC21110@zn.tnic Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 23:48:14 +00:00
disas $T $pc_sub
scripts/decodecode: improve faulting line determination There are cases where the IP pointer in a Code: line in an oops doesn't point at the beginning of an instruction: Code: 0f bd c2 e9 a0 cd b5 e4 48 0f bd c2 e9 97 cd b5 e4 0f 1f 80 00 00 00 00 \ e9 8b cd b5 e4 0f 1f 00 66 0f a3 d0 e9 7f cd b5 e4 0f 1f <80> 00 00 00 \ 00 0f a3 d0 e9 70 cd b5 e4 48 0f a3 d0 e9 67 cd b5 e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 0f 1f 80 00 00 00 00 nopl 0x0(%rax) ^^ and the current way of determining the faulting instruction line doesn't work because disassembled instructions are counted from the IP byte to the end and when that thing points in the middle, the trailing bytes can be interpreted as different insns: Code starting with the faulting instruction =========================================== 0: 80 00 00 addb $0x0,(%rax) 3: 00 00 add %al,(%rax) whereas, this is part of 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 5: 0f a3 d0 bt %edx,%eax ... leading to: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24:* e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 <-- trapping instruction 29: 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 30: 0f a3 d0 bt %edx,%eax which is the wrong faulting instruction. Change the way the faulting line number is determined by matching the opcode bytes from the beginning, leading to correct output: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24: e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 29:* 0f 1f 80 00 00 00 00 nopl 0x0(%rax) <-- trapping instruction 30: 0f a3 d0 bt %edx,%eax While at it, make decodecode use bash as the interpreter - that thing should be present on everything by now. It simplifies the code a lot too. Link: https://lkml.kernel.org/r/20220808085928.29840-1-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-08 08:59:28 +00:00
cat $T.dis >> $T.oo
scripts/decodecode: improve faulting line determination There are cases where the IP pointer in a Code: line in an oops doesn't point at the beginning of an instruction: Code: 0f bd c2 e9 a0 cd b5 e4 48 0f bd c2 e9 97 cd b5 e4 0f 1f 80 00 00 00 00 \ e9 8b cd b5 e4 0f 1f 00 66 0f a3 d0 e9 7f cd b5 e4 0f 1f <80> 00 00 00 \ 00 0f a3 d0 e9 70 cd b5 e4 48 0f a3 d0 e9 67 cd b5 e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 0f 1f 80 00 00 00 00 nopl 0x0(%rax) ^^ and the current way of determining the faulting instruction line doesn't work because disassembled instructions are counted from the IP byte to the end and when that thing points in the middle, the trailing bytes can be interpreted as different insns: Code starting with the faulting instruction =========================================== 0: 80 00 00 addb $0x0,(%rax) 3: 00 00 add %al,(%rax) whereas, this is part of 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 5: 0f a3 d0 bt %edx,%eax ... leading to: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24:* e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 <-- trapping instruction 29: 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 30: 0f a3 d0 bt %edx,%eax which is the wrong faulting instruction. Change the way the faulting line number is determined by matching the opcode bytes from the beginning, leading to correct output: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24: e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 29:* 0f 1f 80 00 00 00 00 nopl 0x0(%rax) <-- trapping instruction 30: 0f a3 d0 bt %edx,%eax While at it, make decodecode use bash as the interpreter - that thing should be present on everything by now. It simplifies the code a lot too. Link: https://lkml.kernel.org/r/20220808085928.29840-1-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-08 08:59:28 +00:00
get_faultlinenum "$code" "$T.dis" $pc_sub
faultlinenum=$?
# and fix code at-and-after marker
code=`echo "$code" | cut -c$((${marker} + 1))-`
scripts/decodecode: improve faulting line determination There are cases where the IP pointer in a Code: line in an oops doesn't point at the beginning of an instruction: Code: 0f bd c2 e9 a0 cd b5 e4 48 0f bd c2 e9 97 cd b5 e4 0f 1f 80 00 00 00 00 \ e9 8b cd b5 e4 0f 1f 00 66 0f a3 d0 e9 7f cd b5 e4 0f 1f <80> 00 00 00 \ 00 0f a3 d0 e9 70 cd b5 e4 48 0f a3 d0 e9 67 cd b5 e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 0f 1f 80 00 00 00 00 nopl 0x0(%rax) ^^ and the current way of determining the faulting instruction line doesn't work because disassembled instructions are counted from the IP byte to the end and when that thing points in the middle, the trailing bytes can be interpreted as different insns: Code starting with the faulting instruction =========================================== 0: 80 00 00 addb $0x0,(%rax) 3: 00 00 add %al,(%rax) whereas, this is part of 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 5: 0f a3 d0 bt %edx,%eax ... leading to: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24:* e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 <-- trapping instruction 29: 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 30: 0f a3 d0 bt %edx,%eax which is the wrong faulting instruction. Change the way the faulting line number is determined by matching the opcode bytes from the beginning, leading to correct output: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24: e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 29:* 0f 1f 80 00 00 00 00 nopl 0x0(%rax) <-- trapping instruction 30: 0f a3 d0 bt %edx,%eax While at it, make decodecode use bash as the interpreter - that thing should be present on everything by now. It simplifies the code a lot too. Link: https://lkml.kernel.org/r/20220808085928.29840-1-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-08 08:59:28 +00:00
rm -f $T.o $T.s $T.dis
fi
scripts/decodecode: improve faulting line determination There are cases where the IP pointer in a Code: line in an oops doesn't point at the beginning of an instruction: Code: 0f bd c2 e9 a0 cd b5 e4 48 0f bd c2 e9 97 cd b5 e4 0f 1f 80 00 00 00 00 \ e9 8b cd b5 e4 0f 1f 00 66 0f a3 d0 e9 7f cd b5 e4 0f 1f <80> 00 00 00 \ 00 0f a3 d0 e9 70 cd b5 e4 48 0f a3 d0 e9 67 cd b5 e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 0f 1f 80 00 00 00 00 nopl 0x0(%rax) ^^ and the current way of determining the faulting instruction line doesn't work because disassembled instructions are counted from the IP byte to the end and when that thing points in the middle, the trailing bytes can be interpreted as different insns: Code starting with the faulting instruction =========================================== 0: 80 00 00 addb $0x0,(%rax) 3: 00 00 add %al,(%rax) whereas, this is part of 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 5: 0f a3 d0 bt %edx,%eax ... leading to: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24:* e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 <-- trapping instruction 29: 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 30: 0f a3 d0 bt %edx,%eax which is the wrong faulting instruction. Change the way the faulting line number is determined by matching the opcode bytes from the beginning, leading to correct output: 1d: 0f 1f 00 nopl (%rax) 20: 66 0f a3 d0 bt %dx,%ax 24: e9 7f cd b5 e4 jmp 0xffffffffe4b5cda8 29:* 0f 1f 80 00 00 00 00 nopl 0x0(%rax) <-- trapping instruction 30: 0f a3 d0 bt %edx,%eax While at it, make decodecode use bash as the interpreter - that thing should be present on everything by now. It simplifies the code a lot too. Link: https://lkml.kernel.org/r/20220808085928.29840-1-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-08 08:59:28 +00:00
echo Code starting with the faulting instruction > $T.aa
echo =========================================== >> $T.aa
scripts/decodecode: fix faulting instruction no print when opps.file is DOS format If opps.file is in DOS format, faulting instruction cannot be printed: / # ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- / # ./scripts/decodecode < oops.file [ 0.734345] Code: d0002881 912f9c21 94067e68 d2800001 (b900003f) aarch64-linux-gnu-strip: '/tmp/tmp.5Y9eybnnSi.o': No such file aarch64-linux-gnu-objdump: '/tmp/tmp.5Y9eybnnSi.o': No such file All code ======== 0: d0002881 adrp x1, 0x512000 4: 912f9c21 add x1, x1, #0xbe7 8: 94067e68 bl 0x19f9a8 c: d2800001 mov x1, #0x0 // #0 10: b900003f str wzr, [x1] Code starting with the faulting instruction =========================================== Background: The compilation environment is Ubuntu, and the test environment is Windows. Most logs are generated in the Windows environment. In this way, CR (carriage return) will inevitably appear, which will affect the use of decodecode in the Ubuntu environment. The repaired effect is as follows: / # ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- / # ./scripts/decodecode < oops.file [ 0.734345] Code: d0002881 912f9c21 94067e68 d2800001 (b900003f) All code ======== 0: d0002881 adrp x1, 0x512000 4: 912f9c21 add x1, x1, #0xbe7 8: 94067e68 bl 0x19f9a8 c: d2800001 mov x1, #0x0 // #0 10:* b900003f str wzr, [x1] <-- trapping instruction Code starting with the faulting instruction =========================================== 0: b900003f str wzr, [x1] Link: https://lkml.kernel.org/r/20211008064712.926-1-weidonghui@allwinnertech.com Signed-off-by: weidonghui <weidonghui@allwinnertech.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: Marc Zyngier <maz@misterjones.org> Cc: Will Deacon <will@kernel.org> Cc: Rabin Vincent <rabin@rab.in> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:34:42 +00:00
code=`echo $code | sed -e 's/\r//;s/ [<(]/ /;s/[>)] / /;s/ /,0x/g; s/[>)]$//'`
echo -n " .$type 0x" > $T.s
echo $code >> $T.s
scripts/decodecode: add the capability to supply the program counter So that comparing with objdump output from vmlinux can ease pinpointing where the trapping instruction actually is. An example is better than a thousand words: $ PC=0xffffffff8329a927 ./scripts/decodecode < ~/tmp/syz/gfs2.splat [ 477.379104][T23917] Code: 48 83 ec 28 48 89 3c 24 48 89 54 24 08 e8 c1 b4 4a fe 48 8d bb 00 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 97 05 00 00 48 8b 9b 00 01 00 00 48 85 db 0f 84 All code ======== ffffffff8329a8fd: 48 83 ec 28 sub $0x28,%rsp ffffffff8329a901: 48 89 3c 24 mov %rdi,(%rsp) ffffffff8329a905: 48 89 54 24 08 mov %rdx,0x8(%rsp) ffffffff8329a90a: e8 c1 b4 4a fe callq 0xffffffff81745dd0 ffffffff8329a90f: 48 8d bb 00 01 00 00 lea 0x100(%rbx),%rdi ffffffff8329a916: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax ffffffff8329a91d: fc ff df ffffffff8329a920: 48 89 fa mov %rdi,%rdx ffffffff8329a923: 48 c1 ea 03 shr $0x3,%rdx ffffffff8329a927:* 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) <-- trapping instruction ffffffff8329a92b: 0f 85 97 05 00 00 jne 0xffffffff8329aec8 ffffffff8329a931: 48 8b 9b 00 01 00 00 mov 0x100(%rbx),%rbx ffffffff8329a938: 48 85 db test %rbx,%rbx ffffffff8329a93b: 0f .byte 0xf ffffffff8329a93c: 84 .byte 0x84 Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marc Zyngier <maz@misterjones.org> Cc: Will Deacon <will@kernel.org> Cc: Rabin Vincent <rabin@rab.in> Link: https://lkml.kernel.org/r/20200930111416.GF6810@zn.tnic Link: https://lkml.kernel.org/r/20200929113238.GC21110@zn.tnic Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 23:48:14 +00:00
disas $T 0
cat $T.dis >> $T.aa
cat $T.oo | sed -e "${faultlinenum}s/^\([^:]*:\)\(.*\)/\1\*\2\t\t<-- trapping instruction/"
echo
cat $T.aa
cleanup