linux-stable/tools/vm/page_owner_sort.c

873 lines
21 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
/*
* User-space helper to sort the output of /sys/kernel/debug/page_owner
*
* Example use:
* cat /sys/kernel/debug/page_owner > page_owner_full.txt
* ./page_owner_sort page_owner_full.txt sorted_page_owner.txt
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
* Or sort by total memory:
* ./page_owner_sort -m page_owner_full.txt sorted_page_owner.txt
*
* See Documentation/mm/page_owner.rst
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
*/
#include <stdio.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <string.h>
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
#include <regex.h>
#include <errno.h>
#include <linux/types.h>
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
#include <getopt.h>
#define bool int
#define true 1
#define false 0
#define TASK_COMM_LEN 16
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
struct block_list {
char *txt;
char *comm; // task command name
char *stacktrace;
__u64 ts_nsec;
__u64 free_ts_nsec;
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
int len;
int num;
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
int page_num;
pid_t pid;
pid_t tgid;
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
int allocator;
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
};
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
enum FILTER_BIT {
FILTER_UNRELEASE = 1<<1,
FILTER_PID = 1<<2,
FILTER_TGID = 1<<3,
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
FILTER_COMM = 1<<4
};
enum CULL_BIT {
CULL_UNRELEASE = 1<<1,
CULL_PID = 1<<2,
CULL_TGID = 1<<3,
CULL_COMM = 1<<4,
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
CULL_STACKTRACE = 1<<5,
CULL_ALLOCATOR = 1<<6
};
enum ALLOCATOR_BIT {
ALLOCATOR_CMA = 1<<1,
ALLOCATOR_SLAB = 1<<2,
ALLOCATOR_VMALLOC = 1<<3,
ALLOCATOR_OTHERS = 1<<4
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
};
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
enum ARG_TYPE {
ARG_TXT, ARG_COMM, ARG_STACKTRACE, ARG_ALLOC_TS, ARG_FREE_TS,
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
ARG_CULL_TIME, ARG_PAGE_NUM, ARG_PID, ARG_TGID, ARG_UNKNOWN, ARG_FREE,
ARG_ALLOCATOR
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
};
enum SORT_ORDER {
SORT_ASC = 1,
SORT_DESC = -1,
};
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
struct filter_condition {
tools/vm/page_owner_sort.c: support for multi-value selection in single argument When viewing page owner information, we may want to select blocks whose PID/TGID/TASK_COMM_NAME appears in a user-specified list for data analysis and aggregation. But currently page_owner_sort only supports selecting blocks associated with only one specified PID/TGID/TASK_COMM_NAME. Therefore, following adjustments are made to fix the problem: 1. Enhance selecting function to support the selection of multiple PIDs/TGIDs/TASK_COMM_NAMEs. The enhanced usages are as follows: --pid <pidlist> Select by pid. This selects the blocks whose PID numbers appear in <pidlist>. --tgid <tgidlist> Select by tgid. This selects the blocks whose TGID numbers appear in <tgidlist>. --name <cmdlist> Select by task command name. This selects the blocks whose task command name appear in <cmdlist>. Where <pidlist>, <tgidlist>, <cmdlist> are single arguments in the form of a comma-separated list,which offers a way to specify individual selecting rules. For example, if you want to select blocks whose tgids are 1, 2 or 3, you have to use 4 commands as follows: ./page_owner_sort <input> <output1> --tgid=1 ./page_owner_sort <input> <output2> --tgid=2 ./page_owner_sort <input> <output3> --tgid=3 cat <output1> <output2> <output3> > <output> With this patch, you can use only 1 command to obtain the same result as above: ./page_owner_sort <input> <output1> --tgid=1,2,3 2. Update explanations of --pid, --tgid and --name in the function usage() and the document(Documents/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-2-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:56 +00:00
pid_t *pids;
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
pid_t *tgids;
tools/vm/page_owner_sort.c: support for multi-value selection in single argument When viewing page owner information, we may want to select blocks whose PID/TGID/TASK_COMM_NAME appears in a user-specified list for data analysis and aggregation. But currently page_owner_sort only supports selecting blocks associated with only one specified PID/TGID/TASK_COMM_NAME. Therefore, following adjustments are made to fix the problem: 1. Enhance selecting function to support the selection of multiple PIDs/TGIDs/TASK_COMM_NAMEs. The enhanced usages are as follows: --pid <pidlist> Select by pid. This selects the blocks whose PID numbers appear in <pidlist>. --tgid <tgidlist> Select by tgid. This selects the blocks whose TGID numbers appear in <tgidlist>. --name <cmdlist> Select by task command name. This selects the blocks whose task command name appear in <cmdlist>. Where <pidlist>, <tgidlist>, <cmdlist> are single arguments in the form of a comma-separated list,which offers a way to specify individual selecting rules. For example, if you want to select blocks whose tgids are 1, 2 or 3, you have to use 4 commands as follows: ./page_owner_sort <input> <output1> --tgid=1 ./page_owner_sort <input> <output2> --tgid=2 ./page_owner_sort <input> <output3> --tgid=3 cat <output1> <output2> <output3> > <output> With this patch, you can use only 1 command to obtain the same result as above: ./page_owner_sort <input> <output1> --tgid=1,2,3 2. Update explanations of --pid, --tgid and --name in the function usage() and the document(Documents/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-2-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:56 +00:00
char **comms;
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
int pids_size;
int tgids_size;
tools/vm/page_owner_sort.c: support for multi-value selection in single argument When viewing page owner information, we may want to select blocks whose PID/TGID/TASK_COMM_NAME appears in a user-specified list for data analysis and aggregation. But currently page_owner_sort only supports selecting blocks associated with only one specified PID/TGID/TASK_COMM_NAME. Therefore, following adjustments are made to fix the problem: 1. Enhance selecting function to support the selection of multiple PIDs/TGIDs/TASK_COMM_NAMEs. The enhanced usages are as follows: --pid <pidlist> Select by pid. This selects the blocks whose PID numbers appear in <pidlist>. --tgid <tgidlist> Select by tgid. This selects the blocks whose TGID numbers appear in <tgidlist>. --name <cmdlist> Select by task command name. This selects the blocks whose task command name appear in <cmdlist>. Where <pidlist>, <tgidlist>, <cmdlist> are single arguments in the form of a comma-separated list,which offers a way to specify individual selecting rules. For example, if you want to select blocks whose tgids are 1, 2 or 3, you have to use 4 commands as follows: ./page_owner_sort <input> <output1> --tgid=1 ./page_owner_sort <input> <output2> --tgid=2 ./page_owner_sort <input> <output3> --tgid=3 cat <output1> <output2> <output3> > <output> With this patch, you can use only 1 command to obtain the same result as above: ./page_owner_sort <input> <output1> --tgid=1,2,3 2. Update explanations of --pid, --tgid and --name in the function usage() and the document(Documents/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-2-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:56 +00:00
int comms_size;
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
};
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
struct sort_condition {
int (**cmps)(const void *, const void *);
int *signs;
int size;
};
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
static struct filter_condition fc;
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
static struct sort_condition sc;
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
static regex_t order_pattern;
static regex_t pid_pattern;
static regex_t tgid_pattern;
static regex_t comm_pattern;
static regex_t ts_nsec_pattern;
static regex_t free_ts_nsec_pattern;
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
static struct block_list *list;
static int list_size;
static int max_size;
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
static int cull;
static int filter;
static bool debug_on;
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
static void set_single_cmp(int (*cmp)(const void *, const void *), int sign);
int read_block(char *buf, char *ext_buf, int buf_size, FILE *fin)
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
{
char *curr = buf, *const buf_end = buf + buf_size;
while (buf_end - curr > 1 && fgets(curr, buf_end - curr, fin)) {
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
if (*curr == '\n') { /* empty line */
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
return curr - buf;
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
}
if (!strncmp(curr, "PFN", 3)) {
strcpy(ext_buf, curr);
continue;
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
}
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
curr += strlen(curr);
}
return -1; /* EOF or no space left in buf. */
}
tools/vm/page_owner_sort.c: add switch between culling by stacktrace and txt Culling by comparing stacktrace would casue loss of some information. For example, if there exists 2 blocks which have the same stacktrace and the different head info Page allocated via order 0, mask 0x108c48(...), pid 73696, ts 1578829190639010 ns, free_ts 1576583851324450 ns prep_new_page+0x80/0xb8 get_page_from_freelist+0x924/0xee8 __alloc_pages+0x138/0xc18 alloc_pages+0x80/0xf0 __page_cache_alloc+0x90/0xc8 Page allocated via order 0, mask 0x108c48(...), pid 61806, ts 1354113726046100 ns, free_ts 1354104926841400 ns prep_new_page+0x80/0xb8 get_page_from_freelist+0x924/0xee8 __alloc_pages+0x138/0xc18 alloc_pages+0x80/0xf0 __page_cache_alloc+0x90/0xc8 After culling, it would be like this 2 times, 2 pages: Page allocated via order 0, mask 0x108c48(...), pid 73696, ts 1578829190639010 ns, free_ts 1576583851324450 ns prep_new_page+0x80/0xb8 get_page_from_freelist+0x924/0xee8 __alloc_pages+0x138/0xc18 alloc_pages+0x80/0xf0 __page_cache_alloc+0x90/0xc8 The info of second block missed. So, add -c to turn on culling by stacktrace. By default, it will cull by txt. Link: https://lkml.kernel.org/r/20211129145658.2491-1-zhangyinan2019@email.szu.edu.cn Signed-off-by: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Changhee Han <ch0.han@lge.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:08:44 +00:00
static int compare_txt(const void *p1, const void *p2)
{
const struct block_list *l1 = p1, *l2 = p2;
return strcmp(l1->txt, l2->txt);
}
static int compare_stacktrace(const void *p1, const void *p2)
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
{
const struct block_list *l1 = p1, *l2 = p2;
return strcmp(l1->stacktrace, l2->stacktrace);
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
}
static int compare_num(const void *p1, const void *p2)
{
const struct block_list *l1 = p1, *l2 = p2;
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
return l1->num - l2->num;
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
}
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
static int compare_page_num(const void *p1, const void *p2)
{
const struct block_list *l1 = p1, *l2 = p2;
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
return l1->page_num - l2->page_num;
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
}
static int compare_pid(const void *p1, const void *p2)
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
{
const struct block_list *l1 = p1, *l2 = p2;
return l1->pid - l2->pid;
}
static int compare_tgid(const void *p1, const void *p2)
{
const struct block_list *l1 = p1, *l2 = p2;
return l1->tgid - l2->tgid;
}
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
static int compare_allocator(const void *p1, const void *p2)
{
const struct block_list *l1 = p1, *l2 = p2;
return l1->allocator - l2->allocator;
}
static int compare_comm(const void *p1, const void *p2)
{
const struct block_list *l1 = p1, *l2 = p2;
return strcmp(l1->comm, l2->comm);
}
static int compare_ts(const void *p1, const void *p2)
{
const struct block_list *l1 = p1, *l2 = p2;
return l1->ts_nsec < l2->ts_nsec ? -1 : 1;
}
static int compare_free_ts(const void *p1, const void *p2)
{
const struct block_list *l1 = p1, *l2 = p2;
return l1->free_ts_nsec < l2->free_ts_nsec ? -1 : 1;
}
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
static int compare_release(const void *p1, const void *p2)
{
const struct block_list *l1 = p1, *l2 = p2;
if (!l1->free_ts_nsec && !l2->free_ts_nsec)
return 0;
if (l1->free_ts_nsec && l2->free_ts_nsec)
return 0;
return l1->free_ts_nsec ? 1 : -1;
}
static int compare_cull_condition(const void *p1, const void *p2)
{
if (cull == 0)
return compare_txt(p1, p2);
if ((cull & CULL_STACKTRACE) && compare_stacktrace(p1, p2))
return compare_stacktrace(p1, p2);
if ((cull & CULL_PID) && compare_pid(p1, p2))
return compare_pid(p1, p2);
if ((cull & CULL_TGID) && compare_tgid(p1, p2))
return compare_tgid(p1, p2);
if ((cull & CULL_COMM) && compare_comm(p1, p2))
return compare_comm(p1, p2);
if ((cull & CULL_UNRELEASE) && compare_release(p1, p2))
return compare_release(p1, p2);
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
if ((cull & CULL_ALLOCATOR) && compare_allocator(p1, p2))
return compare_allocator(p1, p2);
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
return 0;
}
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
static int compare_sort_condition(const void *p1, const void *p2)
{
int cmp = 0;
for (int i = 0; i < sc.size; ++i)
if (cmp == 0)
cmp = sc.signs[i] * sc.cmps[i](p1, p2);
return cmp;
}
static int search_pattern(regex_t *pattern, char *pattern_str, char *buf)
{
int err, val_len;
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
regmatch_t pmatch[2];
err = regexec(pattern, buf, 2, pmatch, REG_NOTBOL);
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
if (err != 0 || pmatch[1].rm_so == -1) {
if (debug_on)
fprintf(stderr, "no matching pattern in %s\n", buf);
return -1;
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
}
val_len = pmatch[1].rm_eo - pmatch[1].rm_so;
memcpy(pattern_str, buf + pmatch[1].rm_so, val_len);
return 0;
}
static void check_regcomp(regex_t *pattern, const char *regex)
{
int err;
err = regcomp(pattern, regex, REG_EXTENDED | REG_NEWLINE);
if (err != 0 || pattern->re_nsub != 1) {
fprintf(stderr, "Invalid pattern %s code %d\n", regex, err);
exit(1);
}
}
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
static char **explode(char sep, const char *str, int *size)
{
int count = 0, len = strlen(str);
int lastindex = -1, j = 0;
for (int i = 0; i < len; i++)
if (str[i] == sep)
count++;
char **ret = calloc(++count, sizeof(char *));
for (int i = 0; i < len; i++) {
if (str[i] == sep) {
ret[j] = calloc(i - lastindex, sizeof(char));
memcpy(ret[j++], str + lastindex + 1, i - lastindex - 1);
lastindex = i;
}
}
if (lastindex <= len - 1) {
ret[j] = calloc(len - lastindex, sizeof(char));
memcpy(ret[j++], str + lastindex + 1, strlen(str) - 1 - lastindex);
}
*size = j;
return ret;
}
static void free_explode(char **arr, int size)
{
for (int i = 0; i < size; i++)
free(arr[i]);
free(arr);
}
# define FIELD_BUFF 25
static int get_page_num(char *buf)
{
int order_val;
char order_str[FIELD_BUFF] = {0};
char *endptr;
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
search_pattern(&order_pattern, order_str, buf);
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
errno = 0;
order_val = strtol(order_str, &endptr, 10);
if (order_val > 64 || errno != 0 || endptr == order_str || *endptr != '\0') {
if (debug_on)
fprintf(stderr, "wrong order in follow buf:\n%s\n", buf);
return 0;
}
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
return 1 << order_val;
}
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
static pid_t get_pid(char *buf)
{
pid_t pid;
char pid_str[FIELD_BUFF] = {0};
char *endptr;
search_pattern(&pid_pattern, pid_str, buf);
errno = 0;
pid = strtol(pid_str, &endptr, 10);
if (errno != 0 || endptr == pid_str || *endptr != '\0') {
if (debug_on)
fprintf(stderr, "wrong/invalid pid in follow buf:\n%s\n", buf);
return -1;
}
return pid;
}
static pid_t get_tgid(char *buf)
{
pid_t tgid;
char tgid_str[FIELD_BUFF] = {0};
char *endptr;
search_pattern(&tgid_pattern, tgid_str, buf);
errno = 0;
tgid = strtol(tgid_str, &endptr, 10);
if (errno != 0 || endptr == tgid_str || *endptr != '\0') {
if (debug_on)
fprintf(stderr, "wrong/invalid tgid in follow buf:\n%s\n", buf);
return -1;
}
return tgid;
}
static __u64 get_ts_nsec(char *buf)
{
__u64 ts_nsec;
char ts_nsec_str[FIELD_BUFF] = {0};
char *endptr;
search_pattern(&ts_nsec_pattern, ts_nsec_str, buf);
errno = 0;
ts_nsec = strtoull(ts_nsec_str, &endptr, 10);
if (errno != 0 || endptr == ts_nsec_str || *endptr != '\0') {
if (debug_on)
fprintf(stderr, "wrong ts_nsec in follow buf:\n%s\n", buf);
return -1;
}
return ts_nsec;
}
static __u64 get_free_ts_nsec(char *buf)
{
__u64 free_ts_nsec;
char free_ts_nsec_str[FIELD_BUFF] = {0};
char *endptr;
search_pattern(&free_ts_nsec_pattern, free_ts_nsec_str, buf);
errno = 0;
free_ts_nsec = strtoull(free_ts_nsec_str, &endptr, 10);
if (errno != 0 || endptr == free_ts_nsec_str || *endptr != '\0') {
if (debug_on)
fprintf(stderr, "wrong free_ts_nsec in follow buf:\n%s\n", buf);
return -1;
}
return free_ts_nsec;
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
}
static char *get_comm(char *buf)
{
char *comm_str = malloc(TASK_COMM_LEN);
memset(comm_str, 0, TASK_COMM_LEN);
search_pattern(&comm_pattern, comm_str, buf);
errno = 0;
if (errno != 0) {
if (debug_on)
fprintf(stderr, "wrong comm in follow buf:\n%s\n", buf);
return NULL;
}
return comm_str;
}
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
static int get_arg_type(const char *arg)
{
if (!strcmp(arg, "pid") || !strcmp(arg, "p"))
return ARG_PID;
else if (!strcmp(arg, "tgid") || !strcmp(arg, "tg"))
return ARG_TGID;
else if (!strcmp(arg, "name") || !strcmp(arg, "n"))
return ARG_COMM;
else if (!strcmp(arg, "stacktrace") || !strcmp(arg, "st"))
return ARG_STACKTRACE;
else if (!strcmp(arg, "free") || !strcmp(arg, "f"))
return ARG_FREE;
else if (!strcmp(arg, "txt") || !strcmp(arg, "T"))
return ARG_TXT;
else if (!strcmp(arg, "free_ts") || !strcmp(arg, "ft"))
return ARG_FREE_TS;
else if (!strcmp(arg, "alloc_ts") || !strcmp(arg, "at"))
return ARG_ALLOC_TS;
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
else if (!strcmp(arg, "allocator") || !strcmp(arg, "ator"))
return ARG_ALLOCATOR;
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
else {
return ARG_UNKNOWN;
}
}
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
static int get_allocator(const char *buf, const char *migrate_info)
{
char *tmp, *first_line, *second_line;
int allocator = 0;
if (strstr(migrate_info, "CMA"))
allocator |= ALLOCATOR_CMA;
if (strstr(migrate_info, "slab"))
allocator |= ALLOCATOR_SLAB;
tmp = strstr(buf, "__vmalloc_node_range");
if (tmp) {
second_line = tmp;
while (*tmp != '\n')
tmp--;
tmp--;
while (*tmp != '\n')
tmp--;
first_line = ++tmp;
tmp = strstr(tmp, "alloc_pages");
if (tmp && first_line <= tmp && tmp < second_line)
allocator |= ALLOCATOR_VMALLOC;
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
}
if (allocator == 0)
allocator = ALLOCATOR_OTHERS;
return allocator;
}
tools/vm/page_owner_sort.c: support for multi-value selection in single argument When viewing page owner information, we may want to select blocks whose PID/TGID/TASK_COMM_NAME appears in a user-specified list for data analysis and aggregation. But currently page_owner_sort only supports selecting blocks associated with only one specified PID/TGID/TASK_COMM_NAME. Therefore, following adjustments are made to fix the problem: 1. Enhance selecting function to support the selection of multiple PIDs/TGIDs/TASK_COMM_NAMEs. The enhanced usages are as follows: --pid <pidlist> Select by pid. This selects the blocks whose PID numbers appear in <pidlist>. --tgid <tgidlist> Select by tgid. This selects the blocks whose TGID numbers appear in <tgidlist>. --name <cmdlist> Select by task command name. This selects the blocks whose task command name appear in <cmdlist>. Where <pidlist>, <tgidlist>, <cmdlist> are single arguments in the form of a comma-separated list,which offers a way to specify individual selecting rules. For example, if you want to select blocks whose tgids are 1, 2 or 3, you have to use 4 commands as follows: ./page_owner_sort <input> <output1> --tgid=1 ./page_owner_sort <input> <output2> --tgid=2 ./page_owner_sort <input> <output3> --tgid=3 cat <output1> <output2> <output3> > <output> With this patch, you can use only 1 command to obtain the same result as above: ./page_owner_sort <input> <output1> --tgid=1,2,3 2. Update explanations of --pid, --tgid and --name in the function usage() and the document(Documents/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-2-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:56 +00:00
static bool match_num_list(int num, int *list, int list_size)
{
for (int i = 0; i < list_size; ++i)
if (list[i] == num)
return true;
return false;
}
static bool match_str_list(const char *str, char **list, int list_size)
{
for (int i = 0; i < list_size; ++i)
if (!strcmp(list[i], str))
return true;
return false;
}
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
static bool is_need(char *buf)
{
tools/vm/page_owner_sort: fix -f option The -f option is to filter out the information of blocks whose memory has not been released, I noticed some blocks should not be filtered out. Commit 9cc7e96aa846 ("mm/page_owner: record timestamp and pid") records the allocation timestamp (ts_nsec) of all pages. Commit 866b48526217 ("mm/page_owner: record the timestamp of all pages during free") records the free timestamp (free_ts_nsec) of all pages. When the page is allocated for the first time, the initial value of free_ts_nsec is 0, and the corresponding time will be obtained when the page is released. But during reallocation the free_ts_nsec will not reset to 0 again. In particular, when page migration occurs, these two timestamps will be the same. Now page_owner_sort removes all text blocks whose free_ts_nsec is not 0 when using -f option. However, this way can only select pages allocated for the first time. If a freed page is reallocated, free_ts_nsec will be less than ts_nsec; if page migration occurs, the two timestamps will be equal. These cases should be considered as pages are not released. So I fix the function is_need() to keep text blocks that meet the above two conditions when using -f option. Link: https://lkml.kernel.org/r/20220812155515.30846-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Liam Mark <lmark@codeaurora.org> Cc: Georgi Djakov <georgi.djakov@linaro.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-12 15:55:15 +00:00
__u64 ts_nsec, free_ts_nsec;
ts_nsec = get_ts_nsec(buf);
free_ts_nsec = get_free_ts_nsec(buf);
if ((filter & FILTER_UNRELEASE) && free_ts_nsec != 0 && ts_nsec < free_ts_nsec)
return false;
if ((filter & FILTER_PID) && !match_num_list(get_pid(buf), fc.pids, fc.pids_size))
return false;
if ((filter & FILTER_TGID) &&
!match_num_list(get_tgid(buf), fc.tgids, fc.tgids_size))
return false;
char *comm = get_comm(buf);
if ((filter & FILTER_COMM) &&
!match_str_list(comm, fc.comms, fc.comms_size)) {
tools/vm/page_owner_sort.c: support for multi-value selection in single argument When viewing page owner information, we may want to select blocks whose PID/TGID/TASK_COMM_NAME appears in a user-specified list for data analysis and aggregation. But currently page_owner_sort only supports selecting blocks associated with only one specified PID/TGID/TASK_COMM_NAME. Therefore, following adjustments are made to fix the problem: 1. Enhance selecting function to support the selection of multiple PIDs/TGIDs/TASK_COMM_NAMEs. The enhanced usages are as follows: --pid <pidlist> Select by pid. This selects the blocks whose PID numbers appear in <pidlist>. --tgid <tgidlist> Select by tgid. This selects the blocks whose TGID numbers appear in <tgidlist>. --name <cmdlist> Select by task command name. This selects the blocks whose task command name appear in <cmdlist>. Where <pidlist>, <tgidlist>, <cmdlist> are single arguments in the form of a comma-separated list,which offers a way to specify individual selecting rules. For example, if you want to select blocks whose tgids are 1, 2 or 3, you have to use 4 commands as follows: ./page_owner_sort <input> <output1> --tgid=1 ./page_owner_sort <input> <output2> --tgid=2 ./page_owner_sort <input> <output3> --tgid=3 cat <output1> <output2> <output3> > <output> With this patch, you can use only 1 command to obtain the same result as above: ./page_owner_sort <input> <output1> --tgid=1,2,3 2. Update explanations of --pid, --tgid and --name in the function usage() and the document(Documents/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-2-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:56 +00:00
free(comm);
return false;
}
free(comm);
return true;
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
}
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
static void add_list(char *buf, int len, char *ext_buf)
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
{
if (list_size != 0 &&
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
len == list[list_size-1].len &&
memcmp(buf, list[list_size-1].txt, len) == 0) {
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
list[list_size-1].num++;
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
list[list_size-1].page_num += get_page_num(buf);
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
return;
}
if (list_size == max_size) {
fprintf(stderr, "max_size too small??\n");
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
exit(1);
}
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
if (!is_need(buf))
return;
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
list[list_size].pid = get_pid(buf);
list[list_size].tgid = get_tgid(buf);
list[list_size].comm = get_comm(buf);
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
list[list_size].txt = malloc(len+1);
if (!list[list_size].txt) {
fprintf(stderr, "Out of memory\n");
exit(1);
}
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
memcpy(list[list_size].txt, buf, len);
list[list_size].txt[len] = 0;
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
list[list_size].len = len;
list[list_size].num = 1;
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
list[list_size].page_num = get_page_num(buf);
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
list[list_size].stacktrace = strchr(list[list_size].txt, '\n') ?: "";
if (*list[list_size].stacktrace == '\n')
list[list_size].stacktrace++;
list[list_size].ts_nsec = get_ts_nsec(buf);
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
list[list_size].free_ts_nsec = get_free_ts_nsec(buf);
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
list[list_size].allocator = get_allocator(buf, ext_buf);
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
list_size++;
if (list_size % 1000 == 0) {
printf("loaded %d\r", list_size);
fflush(stdout);
}
}
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
static bool parse_cull_args(const char *arg_str)
{
int size = 0;
char **args = explode(',', arg_str, &size);
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
for (int i = 0; i < size; ++i) {
int arg_type = get_arg_type(args[i]);
if (arg_type == ARG_PID)
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
cull |= CULL_PID;
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
else if (arg_type == ARG_TGID)
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
cull |= CULL_TGID;
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
else if (arg_type == ARG_COMM)
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
cull |= CULL_COMM;
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
else if (arg_type == ARG_STACKTRACE)
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
cull |= CULL_STACKTRACE;
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
else if (arg_type == ARG_FREE)
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
cull |= CULL_UNRELEASE;
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
else if (arg_type == ARG_ALLOCATOR)
cull |= CULL_ALLOCATOR;
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
else {
free_explode(args, size);
return false;
}
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
}
free_explode(args, size);
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
if (sc.size == 0)
set_single_cmp(compare_num, SORT_DESC);
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
return true;
}
static void set_single_cmp(int (*cmp)(const void *, const void *), int sign)
{
if (sc.signs == NULL || sc.size < 1)
sc.signs = calloc(1, sizeof(int));
sc.signs[0] = sign;
if (sc.cmps == NULL || sc.size < 1)
sc.cmps = calloc(1, sizeof(int *));
sc.cmps[0] = cmp;
sc.size = 1;
}
static bool parse_sort_args(const char *arg_str)
{
int size = 0;
if (sc.size != 0) { /* reset sort_condition */
free(sc.signs);
free(sc.cmps);
size = 0;
}
char **args = explode(',', arg_str, &size);
sc.signs = calloc(size, sizeof(int));
sc.cmps = calloc(size, sizeof(int *));
for (int i = 0; i < size; ++i) {
int offset = 0;
sc.signs[i] = SORT_ASC;
if (args[i][0] == '-' || args[i][0] == '+') {
if (args[i][0] == '-')
sc.signs[i] = SORT_DESC;
offset = 1;
}
int arg_type = get_arg_type(args[i]+offset);
if (arg_type == ARG_PID)
sc.cmps[i] = compare_pid;
else if (arg_type == ARG_TGID)
sc.cmps[i] = compare_tgid;
else if (arg_type == ARG_COMM)
sc.cmps[i] = compare_comm;
else if (arg_type == ARG_STACKTRACE)
sc.cmps[i] = compare_stacktrace;
else if (arg_type == ARG_ALLOC_TS)
sc.cmps[i] = compare_ts;
else if (arg_type == ARG_FREE_TS)
sc.cmps[i] = compare_free_ts;
else if (arg_type == ARG_TXT)
sc.cmps[i] = compare_txt;
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
else if (arg_type == ARG_ALLOCATOR)
sc.cmps[i] = compare_allocator;
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
else {
free_explode(args, size);
sc.size = 0;
return false;
}
}
sc.size = size;
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
free_explode(args, size);
return true;
}
tools/vm/page_owner_sort.c: support for multi-value selection in single argument When viewing page owner information, we may want to select blocks whose PID/TGID/TASK_COMM_NAME appears in a user-specified list for data analysis and aggregation. But currently page_owner_sort only supports selecting blocks associated with only one specified PID/TGID/TASK_COMM_NAME. Therefore, following adjustments are made to fix the problem: 1. Enhance selecting function to support the selection of multiple PIDs/TGIDs/TASK_COMM_NAMEs. The enhanced usages are as follows: --pid <pidlist> Select by pid. This selects the blocks whose PID numbers appear in <pidlist>. --tgid <tgidlist> Select by tgid. This selects the blocks whose TGID numbers appear in <tgidlist>. --name <cmdlist> Select by task command name. This selects the blocks whose task command name appear in <cmdlist>. Where <pidlist>, <tgidlist>, <cmdlist> are single arguments in the form of a comma-separated list,which offers a way to specify individual selecting rules. For example, if you want to select blocks whose tgids are 1, 2 or 3, you have to use 4 commands as follows: ./page_owner_sort <input> <output1> --tgid=1 ./page_owner_sort <input> <output2> --tgid=2 ./page_owner_sort <input> <output3> --tgid=3 cat <output1> <output2> <output3> > <output> With this patch, you can use only 1 command to obtain the same result as above: ./page_owner_sort <input> <output1> --tgid=1,2,3 2. Update explanations of --pid, --tgid and --name in the function usage() and the document(Documents/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-2-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:56 +00:00
static int *parse_nums_list(char *arg_str, int *list_size)
{
int size = 0;
char **args = explode(',', arg_str, &size);
int *list = calloc(size, sizeof(int));
errno = 0;
for (int i = 0; i < size; ++i) {
char *endptr = NULL;
list[i] = strtol(args[i], &endptr, 10);
if (errno != 0 || endptr == args[i] || *endptr != '\0') {
free(list);
return NULL;
}
}
*list_size = size;
free_explode(args, size);
return list;
}
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
static void print_allocator(FILE *out, int allocator)
{
fprintf(out, "allocated by ");
if (allocator & ALLOCATOR_CMA)
fprintf(out, "CMA ");
if (allocator & ALLOCATOR_SLAB)
fprintf(out, "SLAB ");
if (allocator & ALLOCATOR_VMALLOC)
fprintf(out, "VMALLOC ");
if (allocator & ALLOCATOR_OTHERS)
fprintf(out, "OTHERS ");
}
#define BUF_SIZE (128 * 1024)
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
static void usage(void)
{
printf("Usage: ./page_owner_sort [OPTIONS] <input> <output>\n"
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
"-m\t\tSort by total memory.\n"
"-s\t\tSort by the stack trace.\n"
"-t\t\tSort by times (default).\n"
"-p\t\tSort by pid.\n"
"-P\t\tSort by tgid.\n"
"-n\t\tSort by task command name.\n"
"-a\t\tSort by memory allocate time.\n"
"-r\t\tSort by memory release time.\n"
"-f\t\tFilter out the information of blocks whose memory has been released.\n"
"-d\t\tPrint debug information.\n"
tools/vm/page_owner_sort.c: support for multi-value selection in single argument When viewing page owner information, we may want to select blocks whose PID/TGID/TASK_COMM_NAME appears in a user-specified list for data analysis and aggregation. But currently page_owner_sort only supports selecting blocks associated with only one specified PID/TGID/TASK_COMM_NAME. Therefore, following adjustments are made to fix the problem: 1. Enhance selecting function to support the selection of multiple PIDs/TGIDs/TASK_COMM_NAMEs. The enhanced usages are as follows: --pid <pidlist> Select by pid. This selects the blocks whose PID numbers appear in <pidlist>. --tgid <tgidlist> Select by tgid. This selects the blocks whose TGID numbers appear in <tgidlist>. --name <cmdlist> Select by task command name. This selects the blocks whose task command name appear in <cmdlist>. Where <pidlist>, <tgidlist>, <cmdlist> are single arguments in the form of a comma-separated list,which offers a way to specify individual selecting rules. For example, if you want to select blocks whose tgids are 1, 2 or 3, you have to use 4 commands as follows: ./page_owner_sort <input> <output1> --tgid=1 ./page_owner_sort <input> <output2> --tgid=2 ./page_owner_sort <input> <output3> --tgid=3 cat <output1> <output2> <output3> > <output> With this patch, you can use only 1 command to obtain the same result as above: ./page_owner_sort <input> <output1> --tgid=1,2,3 2. Update explanations of --pid, --tgid and --name in the function usage() and the document(Documents/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-2-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:56 +00:00
"--pid <pidlist>\tSelect by pid. This selects the information of blocks whose process ID numbers appear in <pidlist>.\n"
"--tgid <tgidlist>\tSelect by tgid. This selects the information of blocks whose Thread Group ID numbers appear in <tgidlist>.\n"
"--name <cmdlist>\n\t\tSelect by command name. This selects the information of blocks whose command name appears in <cmdlist>.\n"
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
"--cull <rules>\tCull by user-defined rules.<rules> is a single argument in the form of a comma-separated list with some common fields predefined\n"
"--sort <order>\tSpecify sort order as: [+|-]key[,[+|-]key[,...]]\n"
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
);
}
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
int main(int argc, char **argv)
{
FILE *fin, *fout;
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
char *buf, *ext_buf;
int i, count;
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
struct stat st;
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
int opt;
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
struct option longopts[] = {
{ "pid", required_argument, NULL, 1 },
{ "tgid", required_argument, NULL, 2 },
{ "name", required_argument, NULL, 3 },
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
{ "cull", required_argument, NULL, 4 },
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
{ "sort", required_argument, NULL, 5 },
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
{ 0, 0, 0, 0},
};
while ((opt = getopt_long(argc, argv, "adfmnprstP", longopts, NULL)) != -1)
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
switch (opt) {
case 'a':
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
set_single_cmp(compare_ts, SORT_ASC);
break;
case 'd':
debug_on = true;
break;
case 'f':
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
filter = filter | FILTER_UNRELEASE;
break;
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
case 'm':
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
set_single_cmp(compare_page_num, SORT_DESC);
break;
case 'p':
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
set_single_cmp(compare_pid, SORT_ASC);
break;
case 'r':
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
set_single_cmp(compare_free_ts, SORT_ASC);
break;
case 's':
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
set_single_cmp(compare_stacktrace, SORT_ASC);
break;
case 't':
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
set_single_cmp(compare_num, SORT_DESC);
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
break;
case 'P':
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
set_single_cmp(compare_tgid, SORT_ASC);
break;
case 'n':
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
set_single_cmp(compare_comm, SORT_ASC);
break;
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
case 1:
filter = filter | FILTER_PID;
tools/vm/page_owner_sort.c: support for multi-value selection in single argument When viewing page owner information, we may want to select blocks whose PID/TGID/TASK_COMM_NAME appears in a user-specified list for data analysis and aggregation. But currently page_owner_sort only supports selecting blocks associated with only one specified PID/TGID/TASK_COMM_NAME. Therefore, following adjustments are made to fix the problem: 1. Enhance selecting function to support the selection of multiple PIDs/TGIDs/TASK_COMM_NAMEs. The enhanced usages are as follows: --pid <pidlist> Select by pid. This selects the blocks whose PID numbers appear in <pidlist>. --tgid <tgidlist> Select by tgid. This selects the blocks whose TGID numbers appear in <tgidlist>. --name <cmdlist> Select by task command name. This selects the blocks whose task command name appear in <cmdlist>. Where <pidlist>, <tgidlist>, <cmdlist> are single arguments in the form of a comma-separated list,which offers a way to specify individual selecting rules. For example, if you want to select blocks whose tgids are 1, 2 or 3, you have to use 4 commands as follows: ./page_owner_sort <input> <output1> --tgid=1 ./page_owner_sort <input> <output2> --tgid=2 ./page_owner_sort <input> <output3> --tgid=3 cat <output1> <output2> <output3> > <output> With this patch, you can use only 1 command to obtain the same result as above: ./page_owner_sort <input> <output1> --tgid=1,2,3 2. Update explanations of --pid, --tgid and --name in the function usage() and the document(Documents/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-2-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:56 +00:00
fc.pids = parse_nums_list(optarg, &fc.pids_size);
if (fc.pids == NULL) {
fprintf(stderr, "wrong/invalid pid in from the command line:%s\n",
optarg);
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
exit(1);
}
break;
case 2:
filter = filter | FILTER_TGID;
tools/vm/page_owner_sort.c: support for multi-value selection in single argument When viewing page owner information, we may want to select blocks whose PID/TGID/TASK_COMM_NAME appears in a user-specified list for data analysis and aggregation. But currently page_owner_sort only supports selecting blocks associated with only one specified PID/TGID/TASK_COMM_NAME. Therefore, following adjustments are made to fix the problem: 1. Enhance selecting function to support the selection of multiple PIDs/TGIDs/TASK_COMM_NAMEs. The enhanced usages are as follows: --pid <pidlist> Select by pid. This selects the blocks whose PID numbers appear in <pidlist>. --tgid <tgidlist> Select by tgid. This selects the blocks whose TGID numbers appear in <tgidlist>. --name <cmdlist> Select by task command name. This selects the blocks whose task command name appear in <cmdlist>. Where <pidlist>, <tgidlist>, <cmdlist> are single arguments in the form of a comma-separated list,which offers a way to specify individual selecting rules. For example, if you want to select blocks whose tgids are 1, 2 or 3, you have to use 4 commands as follows: ./page_owner_sort <input> <output1> --tgid=1 ./page_owner_sort <input> <output2> --tgid=2 ./page_owner_sort <input> <output3> --tgid=3 cat <output1> <output2> <output3> > <output> With this patch, you can use only 1 command to obtain the same result as above: ./page_owner_sort <input> <output1> --tgid=1,2,3 2. Update explanations of --pid, --tgid and --name in the function usage() and the document(Documents/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-2-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:56 +00:00
fc.tgids = parse_nums_list(optarg, &fc.tgids_size);
if (fc.tgids == NULL) {
fprintf(stderr, "wrong/invalid tgid in from the command line:%s\n",
optarg);
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
exit(1);
}
break;
case 3:
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
filter = filter | FILTER_COMM;
tools/vm/page_owner_sort.c: support for multi-value selection in single argument When viewing page owner information, we may want to select blocks whose PID/TGID/TASK_COMM_NAME appears in a user-specified list for data analysis and aggregation. But currently page_owner_sort only supports selecting blocks associated with only one specified PID/TGID/TASK_COMM_NAME. Therefore, following adjustments are made to fix the problem: 1. Enhance selecting function to support the selection of multiple PIDs/TGIDs/TASK_COMM_NAMEs. The enhanced usages are as follows: --pid <pidlist> Select by pid. This selects the blocks whose PID numbers appear in <pidlist>. --tgid <tgidlist> Select by tgid. This selects the blocks whose TGID numbers appear in <tgidlist>. --name <cmdlist> Select by task command name. This selects the blocks whose task command name appear in <cmdlist>. Where <pidlist>, <tgidlist>, <cmdlist> are single arguments in the form of a comma-separated list,which offers a way to specify individual selecting rules. For example, if you want to select blocks whose tgids are 1, 2 or 3, you have to use 4 commands as follows: ./page_owner_sort <input> <output1> --tgid=1 ./page_owner_sort <input> <output2> --tgid=2 ./page_owner_sort <input> <output3> --tgid=3 cat <output1> <output2> <output3> > <output> With this patch, you can use only 1 command to obtain the same result as above: ./page_owner_sort <input> <output1> --tgid=1,2,3 2. Update explanations of --pid, --tgid and --name in the function usage() and the document(Documents/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-2-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:56 +00:00
fc.comms = explode(',', optarg, &fc.comms_size);
tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name When viewing page owner information, we may also need to select the blocks by PID, TGID or task command name, which helps to get more accurate page allocation information as needed. Therefore, following adjustments are made: 1. Add three new options, including --pid, --tgid and --name, to support the selection of information blocks by a specific pid, tgid and task command name. In addtion, multiple options are allowed to be used at the same time. ./page_owner_sort [input] [output] --pid <PID> ./page_owner_sort [input] [output] --tgid <TGID> ./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME> Assuming a scenario when a multi-threaded program, ./demo (PID = 5280), is running, and ./demo creates a child process (PID = 5281). $ps PID TTY TIME CMD 5215 pts/0 00:00:00 bash 5280 pts/0 00:00:00 ./demo 5281 pts/0 00:00:00 ./demo 5282 pts/0 00:00:00 ps It would be better to filter out the records with tgid=5280 and the task name "demo" when debugging the parent process, and the specific usage is ./page_owner_sort [input] [output] --tgid 5280 --name demo 2. Add explanations of three new options, including --pid, --tgid and --name, to the document. This work is coauthored by Shenghong Han <hanshenghong2019@email.szu.edu.cn>, Yixuan Cao <caoyixuan2019@email.szu.edu.cn>, Yinan Zhang <zhangyinan2019@email.szu.edu.cn>, Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>, Yuhong Feng <yuhongf@szu.edu.cn>. Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zhenliang Wei <weizhenliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:34 +00:00
break;
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
case 4:
if (!parse_cull_args(optarg)) {
fprintf(stderr, "wrong argument after --cull option:%s\n",
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
optarg);
exit(1);
}
break;
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
case 5:
if (!parse_sort_args(optarg)) {
fprintf(stderr, "wrong argument after --sort option:%s\n",
optarg);
exit(1);
}
break;
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
default:
usage();
exit(1);
}
if (optind >= (argc - 1)) {
usage();
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
exit(1);
}
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
fin = fopen(argv[optind], "r");
fout = fopen(argv[optind + 1], "w");
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
if (!fin || !fout) {
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
usage();
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
perror("open: ");
exit(1);
}
check_regcomp(&order_pattern, "order\\s*([0-9]*),");
check_regcomp(&pid_pattern, "pid\\s*([0-9]*),");
check_regcomp(&tgid_pattern, "tgid\\s*([0-9]*) ");
check_regcomp(&comm_pattern, "tgid\\s*[0-9]*\\s*\\((.*)\\),\\s*ts");
check_regcomp(&ts_nsec_pattern, "ts\\s*([0-9]*)\\s*ns,");
check_regcomp(&free_ts_nsec_pattern, "free_ts\\s*([0-9]*)\\s*ns");
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
fstat(fileno(fin), &st);
max_size = st.st_size / 100; /* hack ... */
list = malloc(max_size * sizeof(*list));
buf = malloc(BUF_SIZE);
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
ext_buf = malloc(BUF_SIZE);
if (!list || !buf || !ext_buf) {
fprintf(stderr, "Out of memory\n");
exit(1);
}
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
for ( ; ; ) {
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
int buf_len = read_block(buf, ext_buf, BUF_SIZE, fin);
if (buf_len < 0)
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
break;
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
add_list(buf, buf_len, ext_buf);
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
}
printf("loaded %d\n", list_size);
printf("sorting ....\n");
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
qsort(list, list_size, sizeof(list[0]), compare_cull_condition);
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
printf("culling\n");
for (i = count = 0; i < list_size; i++) {
if (count == 0 ||
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
compare_cull_condition((void *)(&list[count-1]), (void *)(&list[i])) != 0) {
list[count++] = list[i];
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
} else {
list[count-1].num += list[i].num;
list[count-1].page_num += list[i].page_num;
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
}
}
tools/vm/page_owner_sort.c: support sorting blocks by multiple keys When viewing page owner information, we may want to sort blocks of information by multiple keys, since one single key does not uniquely identify a block. Therefore, following adjustments are made: 1. Add a new --sort option to support sorting blocks of information by multiple keys. ./page_owner_sort <input> <output> --sort=<order> ./page_owner_sort <input> <output> --sort <order> <order> is a single argument in the form of a comma-separated list, which offers a way to specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending order can be specified by adding the + (ascending, default) or - (descend -ing) prefix to the key: ./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3... For example, to sort the blocks first by task command name in lexicographic order and then by pid in ascending numerical order, use the following: ./page_owner_sort <input> <output> --sort=name,+pid To sort the blocks first by pid in ascending order and then by timestamp of the page when it is allocated in descending order, use the following: ./page_owner_sort <input> <output> --sort=pid,-alloc_ts 2. Add explanations of a newly added --sort option in the function usage() and the document(Documentation/vm/page_owner.rst). This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Yongqiang Liu Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
qsort(list, count, sizeof(list[0]), compare_sort_condition);
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
for (i = 0; i < count; i++) {
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
if (cull == 0) {
fprintf(fout, "%d times, %d pages, ", list[i].num, list[i].page_num);
print_allocator(fout, list[i].allocator);
fprintf(fout, ":\n%s\n", list[i].txt);
}
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
else {
fprintf(fout, "%d times, %d pages",
list[i].num, list[i].page_num);
if (cull & CULL_PID || filter & FILTER_PID)
fprintf(fout, ", PID %d", list[i].pid);
if (cull & CULL_TGID || filter & FILTER_TGID)
fprintf(fout, ", TGID %d", list[i].pid);
if (cull & CULL_COMM || filter & FILTER_COMM)
fprintf(fout, ", task_comm_name: %s", list[i].comm);
tools/vm/page_owner_sort.c: provide allocator labelling and update --cull and --sort options An application is suspected of having memory leak when its memory consumption is high and keeps increasing. There are several commonly used memory allocators: slab, cma, vmalloc, etc. The memory leak identification can be sped up if the page information allocated by an allocator can be analyzed separately. This patch provides supports for memory allocator labelling for slab, vmalloc, and cma. The pages allocated by slab and cma can be confirmed from the "PFN" line according to the kernel codes, and the label of the vmalloc allocator can be obtained by analyzing the stack trace. Thanks for Vlastimil Babka's constructive suggestions. Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() -> ... -> __vmalloc_node_range() -> __vmalloc_area_node(). __vmalloc_area_node() requests memory through the interface of buddy allocation system. In the current version, __vmalloc_area_node() uses four interfaces: alloc_pages_bulk_array_mempolicy(), alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By disassembling the code, we find that __vmalloc_area_node() is expanded in __vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace. On the test machine, the stack trace of pages allocated by vmalloc has the following four forms: __alloc_pages_bulk+0x230/0x6a0 __vmalloc_node_range+0x19c/0x598 alloc_pages_bulk_array_mempolicy+0xbc/0x278 __vmalloc_node_range+0x1e8/0x598 __alloc_pages+0x160/0x2b0 __vmalloc_node_range+0x234/0x598 alloc_pages+0xac/0x150 __vmalloc_node_range+0x44c/0x598 Therefore, in two consecutive lines of stacktrace, if the first line contains the word "alloc_pages" and the second line contains the word "__vmalloc_node_range", it can be determined that the page is allocated by vmalloc. And the function offset and size are not the same on different machines, so there is no need to match them. At the same time, this patch updates the --cull and --sort options to support allocator-based merge statistics and sorting. The added functions are fully compatible with the original work. When using, you can use "allocator", or abbreviated as "ator". Relevant updates have also been made in the documentation(Documentation/vm/page_owner.rst). Example: ./page_owner_sort <input> <output> --cull=st,pid,name,allocator ./page_owner_sort <input> <output> --sort=ator,pid,name This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han, Chongxi Zhao, Yuhong Feng and Yongqiang Liu. Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Haowen Bai <baihaowen@meizu.com> Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Sean Anderson <seanga2@gmail.com> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:15:57 +00:00
if (cull & CULL_ALLOCATOR) {
fprintf(fout, ", ");
print_allocator(fout, list[i].allocator);
}
tools/vm/page_owner_sort.c: support for user-defined culling rules When viewing page owner information, we may want to cull blocks of information with our own rules. So it is important to enhance culling function to provide the support for customizing culling rules. Therefore, following adjustments are made: 1. Add --cull option to support the culling of blocks of information with user-defined culling rules. ./page_owner_sort <input> <output> --cull=<rules> ./page_owner_sort <input> <output> --cull <rules> <rules> is a single argument in the form of a comma-separated list to specify individual culling rules, by the sequence of keys k1,k2, .... Mixed use of abbreviated and complete-form of keys is allowed. For reference, please see the document(Documentation/vm/page_owner.rst). Now, assuming two blocks in the input file are as follows: Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo) PFN xxxx prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 If we want to cull the blocks by stacktrace and task command name, we can use this command: ./page_owner_sort <input> <output> --cull=stacktrace,name The output would be like: 2 times, 2 pages, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are culled successfully, for they share the same pid and task command name. However, if we want to cull the blocks by pid, stacktrace and task command name, we can this command: ./page_owner_sort <input> <output> --cull=stacktrace,name,pid The output would be like: 1 times, 1 pages, PID 1, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 1 times, 1 pages, PID 32, task_comm_name: task_name_demo prep_new_page+0xd0/0xf8 get_page_from_freelist+0x4a0/0x1290 __alloc_pages+0x168/0x340 alloc_pages+0xb0/0x158 As we can see, these two blocks are failed to cull, for their PIDs are different. 2. Add explanations of --cull options to the document. This work is coauthored by Yixuan Cao Shenghong Han Yinan Zhang Chongxi Zhao Yuhong Feng Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn> Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn> Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn> Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn> Cc: Yuhong Feng <yuhongf@szu.edu.cn> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:38 +00:00
if (cull & CULL_UNRELEASE)
fprintf(fout, " (%s)",
list[i].free_ts_nsec ? "UNRELEASED" : "RELEASED");
if (cull & CULL_STACKTRACE)
fprintf(fout, ":\n%s", list[i].stacktrace);
fprintf(fout, "\n");
}
}
tools/vm/page_owner_sort.c: count and sort by mem When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.com Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:42:55 +00:00
regfree(&order_pattern);
regfree(&pid_pattern);
regfree(&tgid_pattern);
regfree(&comm_pattern);
regfree(&ts_nsec_pattern);
regfree(&free_ts_nsec_pattern);
mm/page_owner: keep track of page owners This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:01 +00:00
return 0;
}