linux-stable/drivers/media/firewire/Makefile

obj-$(CONFIG_DVB_FIREDTV) += firedtv.o

firedtv-y += firedtv-avc.o firedtv-ci.o firedtv-dvb.o firedtv-fe.o firedtv-fw.o
firedtv-$(CONFIG_DVB_FIREDTV_INPUT)    += firedtv-rc.o
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> 2008-08-25 22:17:30 +00:00			`obj-$(CONFIG_DVB_FIREDTV) += firedtv.o`
DVB: add firesat driver Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com> Cleaned up by Greg. Major cleanup and reorg by Manu Abraham <manu@linuxtv.org> Additions also by Ben Backx <ben@bbackx.com> Cc: Christian Dolzer <c.dolzer@digital-everywhere.com> Cc: Andreas Monitzer <andy@monitzer.com> Cc: Manu Abraham <manu@linuxtv.org> Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com> Cc: Robert Berger <robert.berger@reliableembeddedsystems.com> Signed-off-by: Ben Backx <ben@bbackx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Added missing dependency to dvb/firesat/Kconfig, Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tweaked dvb/Makefile. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> 2008-03-07 05:30:23 +00:00
[media] Fix some Makefile rules On a few places, := were using instead of +=, causing drivers to not compile. While here, standardize the usage of += on all cases where multiple lines are needed, and for obj-y/obj-m targets, and := when just one line is needed, on <module>-obj rules. Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Identified-by: Antti Polosaari <crope@iki.fi> Tested-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> 2012-08-16 19:57:21 +00:00			`firedtv-y += firedtv-avc.o firedtv-ci.o firedtv-dvb.o firedtv-fe.o firedtv-fw.o`
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> 2009-02-23 13:21:10 +00:00			`firedtv-$(CONFIG_DVB_FIREDTV_INPUT) += firedtv-rc.o`