License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2009-09-24 16:02:18 +00:00
|
|
|
#ifndef __PERF_PARSE_EVENTS_H
|
|
|
|
#define __PERF_PARSE_EVENTS_H
|
2009-05-26 07:17:18 +00:00
|
|
|
/*
|
|
|
|
* Parse symbolic events/counts passed in as options:
|
|
|
|
*/
|
|
|
|
|
2012-05-21 07:12:49 +00:00
|
|
|
#include <linux/list.h>
|
2012-04-05 16:26:25 +00:00
|
|
|
#include <stdbool.h>
|
2014-04-25 19:31:02 +00:00
|
|
|
#include <linux/types.h>
|
2012-11-19 22:21:03 +00:00
|
|
|
#include <linux/perf_event.h>
|
2017-03-14 15:06:52 +00:00
|
|
|
#include <string.h>
|
2011-01-03 18:39:04 +00:00
|
|
|
|
|
|
|
struct list_head;
|
2019-07-21 11:23:51 +00:00
|
|
|
struct evsel;
|
2019-07-21 11:23:52 +00:00
|
|
|
struct evlist;
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 19:10:16 +00:00
|
|
|
struct parse_events_error;
|
2011-01-03 18:39:04 +00:00
|
|
|
|
2009-07-21 18:16:29 +00:00
|
|
|
struct option;
|
2020-05-05 18:29:43 +00:00
|
|
|
struct perf_pmu;
|
2009-07-21 18:16:29 +00:00
|
|
|
|
2009-08-28 01:09:58 +00:00
|
|
|
struct tracepoint_path {
|
|
|
|
char *system;
|
|
|
|
char *name;
|
|
|
|
struct tracepoint_path *next;
|
|
|
|
};
|
|
|
|
|
2016-03-23 18:06:35 +00:00
|
|
|
struct tracepoint_path *tracepoint_id_to_path(u64 config);
|
|
|
|
struct tracepoint_path *tracepoint_name_to_path(const char *name);
|
|
|
|
bool have_tracepoints(struct list_head *evlist);
|
2009-08-28 01:09:58 +00:00
|
|
|
|
2011-03-10 05:23:28 +00:00
|
|
|
const char *event_type(int type);
|
2009-05-26 09:10:09 +00:00
|
|
|
|
2016-03-23 18:06:35 +00:00
|
|
|
int parse_events_option(const struct option *opt, const char *str, int unset);
|
2020-04-27 16:58:11 +00:00
|
|
|
int parse_events_option_new_evlist(const struct option *opt, const char *str, int unset);
|
2020-06-03 15:32:55 +00:00
|
|
|
int __parse_events(struct evlist *evlist, const char *str, struct parse_events_error *error,
|
|
|
|
struct perf_pmu *fake_pmu);
|
|
|
|
|
|
|
|
static inline int parse_events(struct evlist *evlist, const char *str,
|
|
|
|
struct parse_events_error *err)
|
|
|
|
{
|
|
|
|
return __parse_events(evlist, str, err, NULL);
|
|
|
|
}
|
|
|
|
|
2016-03-23 18:06:35 +00:00
|
|
|
int parse_events_terms(struct list_head *terms, const char *str);
|
|
|
|
int parse_filter(const struct option *opt, const char *str, int unset);
|
|
|
|
int exclude_perf(const struct option *opt, const char *arg, int unset);
|
2009-05-26 09:10:09 +00:00
|
|
|
|
|
|
|
#define EVENTS_HELP_MAX (128*1024)
|
|
|
|
|
2014-10-07 15:08:50 +00:00
|
|
|
enum perf_pmu_event_symbol_type {
|
|
|
|
PMU_EVENT_SYMBOL_ERR, /* not a PMU EVENT */
|
|
|
|
PMU_EVENT_SYMBOL, /* normal style PMU event */
|
|
|
|
PMU_EVENT_SYMBOL_PREFIX, /* prefix of pre-suf style event */
|
|
|
|
PMU_EVENT_SYMBOL_SUFFIX, /* suffix of pre-suf style event */
|
|
|
|
};
|
|
|
|
|
|
|
|
struct perf_pmu_event_symbol {
|
|
|
|
char *symbol;
|
|
|
|
enum perf_pmu_event_symbol_type type;
|
|
|
|
};
|
|
|
|
|
2012-03-15 19:09:16 +00:00
|
|
|
enum {
|
2012-04-25 16:24:57 +00:00
|
|
|
PARSE_EVENTS__TERM_TYPE_NUM,
|
|
|
|
PARSE_EVENTS__TERM_TYPE_STR,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum {
|
|
|
|
PARSE_EVENTS__TERM_TYPE_USER,
|
2012-03-15 19:09:16 +00:00
|
|
|
PARSE_EVENTS__TERM_TYPE_CONFIG,
|
|
|
|
PARSE_EVENTS__TERM_TYPE_CONFIG1,
|
|
|
|
PARSE_EVENTS__TERM_TYPE_CONFIG2,
|
2012-05-21 07:12:53 +00:00
|
|
|
PARSE_EVENTS__TERM_TYPE_NAME,
|
2012-03-15 19:09:16 +00:00
|
|
|
PARSE_EVENTS__TERM_TYPE_SAMPLE_PERIOD,
|
2015-08-09 06:45:23 +00:00
|
|
|
PARSE_EVENTS__TERM_TYPE_SAMPLE_FREQ,
|
2012-03-15 19:09:16 +00:00
|
|
|
PARSE_EVENTS__TERM_TYPE_BRANCH_SAMPLE_TYPE,
|
2015-08-04 08:30:19 +00:00
|
|
|
PARSE_EVENTS__TERM_TYPE_TIME,
|
perf callchain: Per-event type selection support
This patchkit adds the ability to set callgraph mode (fp, dwarf, lbr) per
event. This in term can reduce sampling overhead and the size of the
perf.data.
Here is an example.
perf record -e 'cpu/cpu-cycles,period=1000,call-graph=fp,time=1/,cpu/instructions,call-graph=lbr/' sleep 1
perf evlist -v
cpu/cpu-cycles,period=1000,call-graph=fp,time=1/: type: 4, size: 112,
config: 0x3c, { sample_period, sample_freq }: 1000, sample_type:
IP|TID|TIME|CALLCHAIN|PERIOD|IDENTIFIER, read_format: ID, disabled: 1,
inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all:
1, exclude_guest: 1, mmap2: 1, comm_exec: 1
cpu/instructions,call-graph=lbr/: type: 4, size: 112, config: 0xc0, {
sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|CALLCHAIN|PERIOD|BRANCH_STACK|IDENTIFIER, read_format: ID,
disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1,
exclude_guest: 1
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1439289050-40510-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-11 10:30:47 +00:00
|
|
|
PARSE_EVENTS__TERM_TYPE_CALLGRAPH,
|
|
|
|
PARSE_EVENTS__TERM_TYPE_STACKSIZE,
|
perf tools: Enable pre-event inherit setting by config terms
This patch allows perf record setting event's attr.inherit bit by
config terms like:
# perf record -e cycles/no-inherit/ ...
# perf record -e cycles/inherit/ ...
So user can control inherit bit for each event separately.
In following example, a.out fork()s in main then do some complex
CPU intensive computations in both of its children.
Basic result with and without inherit:
# perf record -e cycles -e instructions ./a.out
[ perf record: Woken up 9 times to write data ]
[ perf record: Captured and wrote 2.205 MB perf.data (47920 samples) ]
# perf report --stdio
# ...
# Samples: 23K of event 'cycles'
# Event count (approx.): 23641752891
...
# Samples: 24K of event 'instructions'
# Event count (approx.): 30428312415
# perf record -i -e cycles -e instructions ./a.out
[ perf record: Woken up 5 times to write data ]
[ perf record: Captured and wrote 1.111 MB perf.data (24019 samples) ]
...
# Samples: 12K of event 'cycles'
# Event count (approx.): 11699501775
...
# Samples: 12K of event 'instructions'
# Event count (approx.): 15058023559
Cancel inherit for one event when globally enable:
# perf record -e cycles/no-inherit/ -e instructions ./a.out
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 1.660 MB perf.data (36004 samples) ]
...
# Samples: 12K of event 'cycles/no-inherit/'
# Event count (approx.): 11895759282
...
# Samples: 24K of event 'instructions'
# Event count (approx.): 30668000441
Enable inherit for one event when globally disable:
# perf record -i -e cycles/inherit/ -e instructions ./a.out
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 1.654 MB perf.data (35868 samples) ]
...
# Samples: 23K of event 'cycles/inherit/'
# Event count (approx.): 23285400229
...
# Samples: 11K of event 'instructions'
# Event count (approx.): 14969050259
Committer note:
One can check if the bit was set, in addition to seeing the result in
the perf.data file size as above by doing one of:
# perf record -e cycles -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.911 MB perf.data (63 samples) ]
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
#
So, the inherit bit was set in both, now, if we disable it globally using
--no-inherit:
# perf record --no-inherit -e cycles -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.910 MB perf.data (56 samples) ]
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
No inherit bit set, then disabling it and setting just on the cycles event:
# perf record --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.909 MB perf.data (48 samples) ]
# perf evlist -v
cycles/inherit/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
#
We can see it as well in by using a more verbose level of debug messages in
the tool that sets up the perf_event_attr, 'perf record' in this case:
[root@zoo ~]# perf record -vv --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
------------------------------------------------------------
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
inherit 1
mmap 1
comm 1
freq 1
task 1
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8
------------------------------------------------------------
perf_event_attr:
size 112
config 0x1
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
<SNIP>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446029705-199659-2-git-send-email-wangnan0@huawei.com
[ s/u64/bool/ for the perf_evsel_config_term inherit field - jolsa]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-28 10:55:02 +00:00
|
|
|
PARSE_EVENTS__TERM_TYPE_NOINHERIT,
|
2016-02-19 11:43:57 +00:00
|
|
|
PARSE_EVENTS__TERM_TYPE_INHERIT,
|
perf tools: Per event max-stack settings
The tooling counterpart, now it is possible to do:
# perf record -e sched:sched_switch/max-stack=10/ -e cycles/call-graph=dwarf,max-stack=4/ -e cpu-cycles/call-graph=dwarf,max-stack=1024/ usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.052 MB perf.data (5 samples) ]
# perf evlist -v
sched:sched_switch: type: 2, size: 112, config: 0x110, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, sample_max_stack: 10
cycles/call-graph=dwarf,max-stack=4/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 4
cpu-cycles/call-graph=dwarf,max-stack=1024/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 1024
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
Using just /max-stack=N/ means /call-graph=fp,max-stack=N/, that should
be further configurable by means of some .perfconfig knob.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-28 22:03:42 +00:00
|
|
|
PARSE_EVENTS__TERM_TYPE_MAX_STACK,
|
perf evsel: Introduce per event max_events property
This simply adds the field to 'struct perf_evsel' and allows setting
it via the event parser, to test it lets trace trace:
First look at where in a function that receives an evsel we can put a probe
to read how evsel->max_events was setup:
# perf probe -x ~/bin/perf -L trace__event_handler
<trace__event_handler@/home/acme/git/perf/tools/perf/builtin-trace.c:0>
0 static int trace__event_handler(struct trace *trace, struct perf_evsel *evsel,
union perf_event *event __maybe_unused,
struct perf_sample *sample)
3 {
4 struct thread *thread = machine__findnew_thread(trace->host, sample->pid, sample->tid);
5 int callchain_ret = 0;
7 if (sample->callchain) {
8 callchain_ret = trace__resolve_callchain(trace, evsel, sample, &callchain_cursor);
9 if (callchain_ret == 0) {
10 if (callchain_cursor.nr < trace->min_stack)
11 goto out;
12 callchain_ret = 1;
}
}
See what variables we can probe at line 7:
# perf probe -x ~/bin/perf -V trace__event_handler:7
Available variables at trace__event_handler:7
@<trace__event_handler+89>
int callchain_ret
struct perf_evsel* evsel
struct perf_sample* sample
struct thread* thread
struct trace* trace
union perf_event* event
Add a probe at that line asking for evsel->max_events to be collected and named
as "max_events":
# perf probe -x ~/bin/perf trace__event_handler:7 'max_events=evsel->max_events'
Added new event:
probe_perf:trace__event_handler (on trace__event_handler:7 in /home/acme/bin/perf with max_events=evsel->max_events)
You can now use it in all perf tools, such as:
perf record -e probe_perf:trace__event_handler -aR sleep 1
Now use 'perf trace', here aliased to just 'trace' and trace trace, i.e.
the first 'trace' is tracing just that 'probe_perf:trace__event_handler' event,
while the traced trace is tracing all scheduler tracepoints, will stop at two
events (--max-events 2) and will just set evsel->max_events for all the sched
tracepoints to 9, we will see the output of both traces intermixed:
# trace -e *perf:*event_handler trace --max-events 2 -e sched:*/nr=9/
0.000 :0/0 sched:sched_waking:comm=rcu_sched pid=10 prio=120 target_cpu=000
0.009 :0/0 sched:sched_wakeup:comm=rcu_sched pid=10 prio=120 target_cpu=000
0.000 trace/23949 probe_perf:trace__event_handler:(48c34a) max_events=0x9
0.046 trace/23949 probe_perf:trace__event_handler:(48c34a) max_events=0x9
#
Now, if the traced trace sends its output to /dev/null, we'll see just
what the first level trace outputs: that evsel->max_events is indeed
being set to 9:
# trace -e *perf:*event_handler trace -o /dev/null --max-events 2 -e sched:*/nr=9/
0.000 trace/23961 probe_perf:trace__event_handler:(48c34a) max_events=0x9
0.030 trace/23961 probe_perf:trace__event_handler:(48c34a) max_events=0x9
#
Now that we can set evsel->max_events, we can go to the next step, honour that
per-event property in 'perf trace'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-og00yasj276joem6e14l1eas@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-19 18:47:34 +00:00
|
|
|
PARSE_EVENTS__TERM_TYPE_MAX_EVENTS,
|
perf tools: Enable overwrite settings
This patch allows following config terms and option:
Globally setting events to overwrite;
# perf record --overwrite ...
Set specific events to be overwrite or no-overwrite.
# perf record --event cycles/overwrite/ ...
# perf record --event cycles/no-overwrite/ ...
Add missing config terms and update the config term array size because
the longest string length has changed.
For overwritable events, it automatically selects attr.write_backward
since perf requires it to be backward for reading.
Test result:
# perf record --overwrite -e syscalls:*enter_nanosleep* usleep 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ]
# perf evlist -v
syscalls:sys_enter_nanosleep: type: 2, size: 112, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, write_backward: 1
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-14-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 08:34:45 +00:00
|
|
|
PARSE_EVENTS__TERM_TYPE_NOOVERWRITE,
|
|
|
|
PARSE_EVENTS__TERM_TYPE_OVERWRITE,
|
2016-09-06 16:37:15 +00:00
|
|
|
PARSE_EVENTS__TERM_TYPE_DRV_CFG,
|
2019-04-12 13:59:47 +00:00
|
|
|
PARSE_EVENTS__TERM_TYPE_PERCORE,
|
2019-08-06 08:46:05 +00:00
|
|
|
PARSE_EVENTS__TERM_TYPE_AUX_OUTPUT,
|
2019-11-15 12:42:17 +00:00
|
|
|
PARSE_EVENTS__TERM_TYPE_AUX_SAMPLE_SIZE,
|
2016-02-19 11:43:57 +00:00
|
|
|
__PARSE_EVENTS__TERM_TYPE_NR,
|
2012-03-15 19:09:16 +00:00
|
|
|
};
|
|
|
|
|
2016-02-22 09:10:34 +00:00
|
|
|
struct parse_events_array {
|
|
|
|
size_t nr_ranges;
|
|
|
|
struct {
|
|
|
|
unsigned int start;
|
|
|
|
size_t length;
|
|
|
|
} *ranges;
|
|
|
|
};
|
|
|
|
|
2013-01-18 19:29:49 +00:00
|
|
|
struct parse_events_term {
|
2012-03-15 19:09:16 +00:00
|
|
|
char *config;
|
2016-02-22 09:10:34 +00:00
|
|
|
struct parse_events_array array;
|
2012-03-15 19:09:16 +00:00
|
|
|
union {
|
|
|
|
char *str;
|
2012-08-07 17:43:13 +00:00
|
|
|
u64 num;
|
2012-03-15 19:09:16 +00:00
|
|
|
} val;
|
2012-04-25 16:24:57 +00:00
|
|
|
int type_val;
|
|
|
|
int type_term;
|
2012-03-15 19:09:16 +00:00
|
|
|
struct list_head list;
|
2015-01-08 01:13:50 +00:00
|
|
|
bool used;
|
2017-02-17 14:00:56 +00:00
|
|
|
bool no_value;
|
2015-04-22 19:10:20 +00:00
|
|
|
|
|
|
|
/* error string indexes for within parsed string */
|
|
|
|
int err_term;
|
|
|
|
int err_val;
|
2017-10-20 20:27:55 +00:00
|
|
|
|
|
|
|
/* Coming from implicit alias */
|
|
|
|
bool weak;
|
2012-03-15 19:09:16 +00:00
|
|
|
};
|
|
|
|
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 19:10:16 +00:00
|
|
|
struct parse_events_error {
|
perf parse: Report initial event parsing error
Record the first event parsing error and report. Implementing feedback
from Jiri Olsa:
https://lkml.org/lkml/2019/10/28/680
An example error is:
$ tools/perf/perf stat -e c/c/
WARNING: multiple event parsing errors
event syntax error: 'c/c/'
\___ unknown term
valid terms: event,filter_rem,filter_opc0,edge,filter_isoc,filter_tid,filter_loc,filter_nc,inv,umask,filter_opc1,tid_en,thresh,filter_all_op,filter_not_nm,filter_state,filter_nm,config,config1,config2,name,period,percore
Initial error:
event syntax error: 'c/c/'
\___ Cannot find PMU `c'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20191116074652.9960-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-16 07:46:52 +00:00
|
|
|
int num_errors; /* number of errors encountered */
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 19:10:16 +00:00
|
|
|
int idx; /* index in the parsed string */
|
|
|
|
char *str; /* string to display at the index */
|
|
|
|
char *help; /* optional help string */
|
perf parse: Report initial event parsing error
Record the first event parsing error and report. Implementing feedback
from Jiri Olsa:
https://lkml.org/lkml/2019/10/28/680
An example error is:
$ tools/perf/perf stat -e c/c/
WARNING: multiple event parsing errors
event syntax error: 'c/c/'
\___ unknown term
valid terms: event,filter_rem,filter_opc0,edge,filter_isoc,filter_tid,filter_loc,filter_nc,inv,umask,filter_opc1,tid_en,thresh,filter_all_op,filter_not_nm,filter_state,filter_nm,config,config1,config2,name,period,percore
Initial error:
event syntax error: 'c/c/'
\___ Cannot find PMU `c'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20191116074652.9960-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-16 07:46:52 +00:00
|
|
|
int first_idx;/* as above, but for the first encountered error */
|
|
|
|
char *first_str;
|
|
|
|
char *first_help;
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 19:10:16 +00:00
|
|
|
};
|
|
|
|
|
2017-08-17 17:13:25 +00:00
|
|
|
struct parse_events_state {
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 19:10:16 +00:00
|
|
|
struct list_head list;
|
|
|
|
int idx;
|
|
|
|
int nr_groups;
|
|
|
|
struct parse_events_error *error;
|
2020-06-02 21:47:29 +00:00
|
|
|
struct evlist *evlist;
|
2017-08-17 17:22:50 +00:00
|
|
|
struct list_head *terms;
|
2020-05-24 22:42:08 +00:00
|
|
|
int stoken;
|
2020-06-02 21:47:29 +00:00
|
|
|
struct perf_pmu *fake_pmu;
|
2012-06-15 06:31:40 +00:00
|
|
|
};
|
|
|
|
|
perf parse: Add parse events handle error
Parse event error handling may overwrite one error string with another
creating memory leaks. Introduce a helper routine that warns about
multiple error messages as well as avoiding the memory leak.
A reproduction of this problem can be seen with:
perf stat -e c/c/
After this change this produces:
WARNING: multiple event parsing errors
event syntax error: 'c/c/'
\___ unknown term
valid terms: event,filter_rem,filter_opc0,edge,filter_isoc,filter_tid,filter_loc,filter_nc,inv,umask,filter_opc1,tid_en,thresh,filter_all_op,filter_not_nm,filter_state,filter_nm,config,config1,config2,name,period,percore
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191030223448.12930-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-10-30 22:34:39 +00:00
|
|
|
void parse_events__handle_error(struct parse_events_error *err, int idx,
|
|
|
|
char *str, char *help);
|
perf stat: Bail out on unsupported event config modifiers
'perf stat' accepts some config terms but doesn't apply them. For
example:
# perf stat -e 'instructions/no-inherit/' -e 'instructions/inherit/' bash
# ls
# exit
Performance counter stats for 'bash':
266258061 instructions/no-inherit/
266258061 instructions/inherit/
1.402183915 seconds time elapsed
The result is confusing, because user may expect the first
'instructions' event exclude the 'ls' command.
This patch forbid most of these config terms for 'perf stat'.
Result:
# ./perf stat -e 'instructions/no-inherit/' -e 'instructions/inherit/' bash
event syntax error: 'instructions/no-inherit/'
\___ 'no-inherit' is not usable in 'perf stat'
...
We can add blocked config terms back when 'perf stat' really supports them.
This patch also removes unavailable config term from error message:
# ./perf stat -e 'instructions/badterm/' ls
event syntax error: 'instructions/badterm/'
\___ unknown term
valid terms: config,config1,config2,name
# ./perf stat -e 'cpu/badterm/' ls
event syntax error: 'cpu/badterm/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 11:43:58 +00:00
|
|
|
void parse_events__shrink_config_terms(void);
|
2013-01-18 19:29:49 +00:00
|
|
|
int parse_events__is_hardcoded_term(struct parse_events_term *term);
|
2015-05-19 13:05:42 +00:00
|
|
|
int parse_events_term__num(struct parse_events_term **term,
|
|
|
|
int type_term, char *config, u64 num,
|
2017-02-17 14:00:56 +00:00
|
|
|
bool novalue,
|
2015-05-19 13:05:42 +00:00
|
|
|
void *loc_term, void *loc_val);
|
|
|
|
int parse_events_term__str(struct parse_events_term **term,
|
|
|
|
int type_term, char *config, char *str,
|
|
|
|
void *loc_term, void *loc_val);
|
2013-01-18 19:29:49 +00:00
|
|
|
int parse_events_term__sym_hw(struct parse_events_term **term,
|
2012-10-10 12:53:17 +00:00
|
|
|
char *config, unsigned idx);
|
2013-01-18 19:29:49 +00:00
|
|
|
int parse_events_term__clone(struct parse_events_term **new,
|
|
|
|
struct parse_events_term *term);
|
2019-10-30 22:34:47 +00:00
|
|
|
void parse_events_term__delete(struct parse_events_term *term);
|
2016-02-12 20:09:17 +00:00
|
|
|
void parse_events_terms__delete(struct list_head *terms);
|
2016-02-12 19:43:02 +00:00
|
|
|
void parse_events_terms__purge(struct list_head *terms);
|
2016-02-22 09:10:34 +00:00
|
|
|
void parse_events__clear_array(struct parse_events_array *a);
|
2012-08-08 10:21:54 +00:00
|
|
|
int parse_events__modifier_event(struct list_head *list, char *str, bool add);
|
2012-08-08 10:14:14 +00:00
|
|
|
int parse_events__modifier_group(struct list_head *list, char *event_mod);
|
2012-08-16 19:10:21 +00:00
|
|
|
int parse_events_name(struct list_head *list, char *name);
|
2013-07-02 19:27:25 +00:00
|
|
|
int parse_events_add_tracepoint(struct list_head *list, int *idx,
|
2016-07-13 10:44:03 +00:00
|
|
|
const char *sys, const char *event,
|
2015-09-28 03:52:16 +00:00
|
|
|
struct parse_events_error *error,
|
|
|
|
struct list_head *head_config);
|
2017-08-17 19:13:34 +00:00
|
|
|
int parse_events_load_bpf(struct parse_events_state *parse_state,
|
perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 12:41:14 +00:00
|
|
|
struct list_head *list,
|
2015-10-14 12:41:20 +00:00
|
|
|
char *bpf_file_name,
|
perf tools: Enable BPF object configure syntax
This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.
After this patch, following syntax is available:
# perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...
It would takes effect after appling following commits.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
- Normal case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
- Error case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
event syntax error: '..ps:channel:value/'
\___ Config value not set (missing '=')
Hint: Valid config term:
map:[<arraymap>]:value=[value]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
# ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
\___ Invalid object config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
event syntax error: '..p_1.c/map:xchannel.value=10/'
\___ Target map not exist
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
event syntax error: '..ps:channel.xvalue=10/'
\___ Invalid object map config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
event syntax error: '..nnel.value=x10/'
\___ Incorrect value type for map
[SNIP]
Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
event syntax error: '..ps:channel.value=10/'
\___ Can't use this config term to this type of map
Hint: Valid config term:
map:[<arraymap>].value=[value]
(add -v to see detail)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 09:10:31 +00:00
|
|
|
bool source,
|
|
|
|
struct list_head *head_config);
|
perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 12:41:14 +00:00
|
|
|
/* Provide this function for perf test */
|
|
|
|
struct bpf_object;
|
2017-08-17 19:13:34 +00:00
|
|
|
int parse_events_load_bpf_obj(struct parse_events_state *parse_state,
|
perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 12:41:14 +00:00
|
|
|
struct list_head *list,
|
2016-02-22 09:10:36 +00:00
|
|
|
struct bpf_object *obj,
|
|
|
|
struct list_head *head_config);
|
2017-08-17 19:13:34 +00:00
|
|
|
int parse_events_add_numeric(struct parse_events_state *parse_state,
|
2015-04-22 19:10:24 +00:00
|
|
|
struct list_head *list,
|
2012-08-07 17:43:13 +00:00
|
|
|
u32 type, u64 config,
|
2012-03-15 19:09:16 +00:00
|
|
|
struct list_head *head_config);
|
2019-03-26 22:18:21 +00:00
|
|
|
enum perf_tool_event;
|
|
|
|
int parse_events_add_tool(struct parse_events_state *parse_state,
|
|
|
|
struct list_head *list,
|
|
|
|
enum perf_tool_event tool_event);
|
2013-07-02 19:27:25 +00:00
|
|
|
int parse_events_add_cache(struct list_head *list, int *idx,
|
2016-02-19 11:44:01 +00:00
|
|
|
char *type, char *op_result1, char *op_result2,
|
|
|
|
struct parse_events_error *error,
|
|
|
|
struct list_head *head_config);
|
2013-07-02 19:27:25 +00:00
|
|
|
int parse_events_add_breakpoint(struct list_head *list, int *idx,
|
2020-09-25 00:39:03 +00:00
|
|
|
u64 addr, char *type, u64 len);
|
2017-08-17 19:13:34 +00:00
|
|
|
int parse_events_add_pmu(struct parse_events_state *parse_state,
|
2015-04-22 19:10:19 +00:00
|
|
|
struct list_head *list, char *name,
|
perf parse-events: Handle uncore event aliases in small groups properly
Perf stat doesn't count the uncore event aliases from the same uncore
block in a group, for example:
perf stat -e '{unc_m_cas_count.all,unc_m_clockticks}' -a -I 1000
# time counts unit events
1.000447342 <not counted> unc_m_cas_count.all
1.000447342 <not counted> unc_m_clockticks
2.000740654 <not counted> unc_m_cas_count.all
2.000740654 <not counted> unc_m_clockticks
The output is very misleading. It gives a wrong impression that the
uncore event doesn't work.
An uncore block could be composed by several PMUs. An uncore event alias
is a joint name which means the same event runs on all PMUs of a block.
Perf doesn't support mixed events from different PMUs in the same group.
It is wrong to put uncore event aliases in a big group.
The right way is to split the big group into multiple small groups which
only include the events from the same PMU.
Only uncore event aliases from the same uncore block should be specially
handled here. It doesn't make sense to mix the uncore events with other
uncore events from different blocks or even core events in a group.
With the patch:
# time counts unit events
1.001557653 140,833 unc_m_cas_count.all
1.001557653 1,330,231,332 unc_m_clockticks
2.002709483 85,007 unc_m_cas_count.all
2.002709483 1,429,494,563 unc_m_clockticks
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1525727623-19768-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-07 21:13:43 +00:00
|
|
|
struct list_head *head_config,
|
|
|
|
bool auto_merge_stats,
|
|
|
|
bool use_alias);
|
2017-03-20 20:17:02 +00:00
|
|
|
|
2020-05-05 18:29:43 +00:00
|
|
|
struct evsel *parse_events__add_event(int idx, struct perf_event_attr *attr,
|
|
|
|
char *name, struct perf_pmu *pmu);
|
|
|
|
|
2017-08-17 19:13:34 +00:00
|
|
|
int parse_events_multi_pmu_add(struct parse_events_state *parse_state,
|
2017-03-20 20:17:02 +00:00
|
|
|
char *str,
|
|
|
|
struct list_head **listp);
|
|
|
|
|
perf pmu: Expand PMU events by prefix match
When the user specifies a pmu directly, expand it automatically with a
prefix match for all available PMUs, similar as we do for the normal
aliases now.
This allows to specify attributes for duplicated boxes quickly. For
example uncore_cbox_{0,6}/.../ can be now specified as uncore_cbox/.../
and it gets automatically expanded for all boxes.
This generally makes it more concise to write uncore specifications, and
also avoids the need to know the exact topology of the system.
Before:
% perf stat -a -e uncore_cbox_0/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_1/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_2/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_3/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_4/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_5/event=0x35,umask=0x1,filter_opc=0x19C/ sleep 1
After:
% perf stat -a -e uncore_cbox/event=0x35,umask=0x1,filter_opc=0x19C/ sleep 1
v2: Handle all bison rules. Move multi add code to separate function.
Handle uncore_ prefix correctly.
v3: Move parse_events_multi_pmu_add to separate patch. Move uncore
prefix check to separate patch.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-6-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-20 20:17:03 +00:00
|
|
|
int parse_events_copy_term_list(struct list_head *old,
|
|
|
|
struct list_head **new);
|
|
|
|
|
2014-10-07 15:08:50 +00:00
|
|
|
enum perf_pmu_event_symbol_type
|
|
|
|
perf_pmu__parse_check(const char *name);
|
perf parse-events: Handle uncore event aliases in small groups properly
Perf stat doesn't count the uncore event aliases from the same uncore
block in a group, for example:
perf stat -e '{unc_m_cas_count.all,unc_m_clockticks}' -a -I 1000
# time counts unit events
1.000447342 <not counted> unc_m_cas_count.all
1.000447342 <not counted> unc_m_clockticks
2.000740654 <not counted> unc_m_cas_count.all
2.000740654 <not counted> unc_m_clockticks
The output is very misleading. It gives a wrong impression that the
uncore event doesn't work.
An uncore block could be composed by several PMUs. An uncore event alias
is a joint name which means the same event runs on all PMUs of a block.
Perf doesn't support mixed events from different PMUs in the same group.
It is wrong to put uncore event aliases in a big group.
The right way is to split the big group into multiple small groups which
only include the events from the same PMU.
Only uncore event aliases from the same uncore block should be specially
handled here. It doesn't make sense to mix the uncore events with other
uncore events from different blocks or even core events in a group.
With the patch:
# time counts unit events
1.001557653 140,833 unc_m_cas_count.all
1.001557653 1,330,231,332 unc_m_clockticks
2.002709483 85,007 unc_m_cas_count.all
2.002709483 1,429,494,563 unc_m_clockticks
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1525727623-19768-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-07 21:13:43 +00:00
|
|
|
void parse_events__set_leader(char *name, struct list_head *list,
|
|
|
|
struct parse_events_state *parse_state);
|
2012-03-20 18:15:40 +00:00
|
|
|
void parse_events_update_lists(struct list_head *list_event,
|
|
|
|
struct list_head *list_all);
|
2017-08-17 19:13:34 +00:00
|
|
|
void parse_events_evlist_error(struct parse_events_state *parse_state,
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 19:10:16 +00:00
|
|
|
int idx, const char *str);
|
2012-03-15 19:09:15 +00:00
|
|
|
|
2016-09-15 22:24:48 +00:00
|
|
|
void print_events(const char *event_glob, bool name_only, bool quiet,
|
2019-10-15 02:53:57 +00:00
|
|
|
bool long_desc, bool details_flag, bool deprecated);
|
2015-02-27 10:21:27 +00:00
|
|
|
|
|
|
|
struct event_symbol {
|
|
|
|
const char *symbol;
|
|
|
|
const char *alias;
|
|
|
|
};
|
|
|
|
extern struct event_symbol event_symbols_hw[];
|
|
|
|
extern struct event_symbol event_symbols_sw[];
|
|
|
|
void print_symbol_events(const char *event_glob, unsigned type,
|
|
|
|
struct event_symbol *syms, unsigned max,
|
|
|
|
bool name_only);
|
2019-03-26 22:18:23 +00:00
|
|
|
void print_tool_events(const char *event_glob, bool name_only);
|
2012-08-09 14:31:52 +00:00
|
|
|
void print_tracepoint_events(const char *subsys_glob, const char *event_glob,
|
|
|
|
bool name_only);
|
|
|
|
int print_hwcache_events(const char *event_glob, bool name_only);
|
2016-06-24 09:06:46 +00:00
|
|
|
void print_sdt_events(const char *subsys_glob, const char *event_glob,
|
|
|
|
bool name_only);
|
2016-03-23 18:06:35 +00:00
|
|
|
int is_valid_tracepoint(const char *event_string);
|
2009-05-26 09:10:09 +00:00
|
|
|
|
2015-02-02 19:35:07 +00:00
|
|
|
int valid_event_mount(const char *eventfs);
|
perf tools: Show proper error message for wrong terms of hw/sw events
Show proper error message and show valid terms when wrong config terms
is specified for hw/sw type perf events.
This patch makes the original error format function formats_error_string()
more generic, which only outputs the static config terms for hw/sw perf
events, and prepends pmu formats for pmu events.
Before this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
invalid or unsupported event: 'cpu-clock/freqx=200/'
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
After this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
event syntax error: 'cpu-clock/freqx=200/'
\___ unknown term
valid terms: config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28 03:52:14 +00:00
|
|
|
char *parse_events_formats_error_string(char *additional_terms);
|
2009-07-21 18:16:29 +00:00
|
|
|
|
2017-09-13 21:50:06 +00:00
|
|
|
void parse_events_print_error(struct parse_events_error *err,
|
|
|
|
const char *event);
|
|
|
|
|
2017-03-14 15:06:52 +00:00
|
|
|
#ifdef HAVE_LIBELF_SUPPORT
|
|
|
|
/*
|
|
|
|
* If the probe point starts with '%',
|
|
|
|
* or starts with "sdt_" and has a ':' but no '=',
|
|
|
|
* then it should be a SDT/cached probe point.
|
|
|
|
*/
|
|
|
|
static inline bool is_sdt_event(char *str)
|
|
|
|
{
|
|
|
|
return (str[0] == '%' ||
|
|
|
|
(!strncmp(str, "sdt_", 4) &&
|
|
|
|
!!strchr(str, ':') && !strchr(str, '=')));
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
static inline bool is_sdt_event(char *str __maybe_unused)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
#endif /* HAVE_LIBELF_SUPPORT */
|
|
|
|
|
2020-07-26 07:52:44 +00:00
|
|
|
int perf_pmu__test_parse_init(void);
|
|
|
|
|
2009-09-24 16:02:18 +00:00
|
|
|
#endif /* __PERF_PARSE_EVENTS_H */
|