linux-stable/drivers/gpu/drm/i915/i915_gem_internal.c

208 lines
5.7 KiB
C
Raw Normal View History

drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
/*
* Copyright © 2014-2016 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
*/
#include <drm/drmP.h>
#include <drm/i915_drm.h>
#include "i915_drv.h"
#define QUIET (__GFP_NORETRY | __GFP_NOWARN)
#define MAYFAIL (__GFP_RETRY_MAYFAIL | __GFP_NOWARN)
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
/* convert swiotlb segment size into sensible units (pages)! */
#define IO_TLB_SEGPAGES (IO_TLB_SEGSIZE << IO_TLB_SHIFT >> PAGE_SHIFT)
static void internal_free_pages(struct sg_table *st)
{
struct scatterlist *sg;
for (sg = st->sgl; sg; sg = __sg_next(sg)) {
if (sg_page(sg))
__free_pages(sg_page(sg), get_order(sg->length));
}
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
sg_free_table(st);
kfree(st);
}
static int i915_gem_object_get_pages_internal(struct drm_i915_gem_object *obj)
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
{
struct drm_i915_private *i915 = to_i915(obj->base.dev);
struct sg_table *st;
struct scatterlist *sg;
unsigned int sg_page_sizes;
unsigned int npages;
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
int max_order;
gfp_t gfp;
max_order = MAX_ORDER;
#ifdef CONFIG_SWIOTLB
if (swiotlb_nr_tbl()) {
unsigned int max_segment;
max_segment = swiotlb_max_segment();
if (max_segment) {
max_segment = max_t(unsigned int, max_segment,
PAGE_SIZE) >> PAGE_SHIFT;
max_order = min(max_order, ilog2(max_segment));
}
}
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
#endif
gfp = GFP_KERNEL | __GFP_HIGHMEM | __GFP_RECLAIMABLE;
if (IS_I965GM(i915) || IS_I965G(i915)) {
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
/* 965gm cannot relocate objects above 4GiB. */
gfp &= ~__GFP_HIGHMEM;
gfp |= __GFP_DMA32;
}
create_st:
st = kmalloc(sizeof(*st), GFP_KERNEL);
if (!st)
return -ENOMEM;
npages = obj->base.size / PAGE_SIZE;
if (sg_alloc_table(st, npages, GFP_KERNEL)) {
kfree(st);
return -ENOMEM;
}
sg = st->sgl;
st->nents = 0;
sg_page_sizes = 0;
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
do {
int order = min(fls(npages) - 1, max_order);
struct page *page;
do {
page = alloc_pages(gfp | (order ? QUIET : MAYFAIL),
order);
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
if (page)
break;
if (!order--)
goto err;
/* Limit subsequent allocations as well */
max_order = order;
} while (1);
sg_set_page(sg, page, PAGE_SIZE << order, 0);
sg_page_sizes |= PAGE_SIZE << order;
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
st->nents++;
npages -= 1 << order;
if (!npages) {
sg_mark_end(sg);
break;
}
sg = __sg_next(sg);
} while (1);
if (i915_gem_gtt_prepare_pages(obj, st)) {
/* Failed to dma-map try again with single page sg segments */
if (get_order(st->sgl->length)) {
internal_free_pages(st);
max_order = 0;
goto create_st;
}
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
goto err;
}
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
/* Mark the pages as dontneed whilst they are still pinned. As soon
* as they are unpinned they are allowed to be reaped by the shrinker,
* and the caller is expected to repopulate - the contents of this
* object are only valid whilst active and pinned.
*/
obj->mm.madv = I915_MADV_DONTNEED;
__i915_gem_object_set_pages(obj, st, sg_page_sizes);
return 0;
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
err:
sg_set_page(sg, NULL, 0, 0);
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
sg_mark_end(sg);
internal_free_pages(st);
return -ENOMEM;
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
}
static void i915_gem_object_put_pages_internal(struct drm_i915_gem_object *obj,
struct sg_table *pages)
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
{
i915_gem_gtt_finish_pages(obj, pages);
internal_free_pages(pages);
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
obj->mm.dirty = false;
obj->mm.madv = I915_MADV_WILLNEED;
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
}
static const struct drm_i915_gem_object_ops i915_gem_object_internal_ops = {
.flags = I915_GEM_OBJECT_HAS_STRUCT_PAGE |
I915_GEM_OBJECT_IS_SHRINKABLE,
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
.get_pages = i915_gem_object_get_pages_internal,
.put_pages = i915_gem_object_put_pages_internal,
};
/**
* Creates a new object that wraps some internal memory for private use.
* This object is not backed by swappable storage, and as such its contents
* are volatile and only valid whilst pinned. If the object is reaped by the
* shrinker, its pages and data will be discarded. Equally, it is not a full
* GEM object and so not valid for access from userspace. This makes it useful
* for hardware interfaces like ringbuffers (which are pinned from the time
* the request is written to the time the hardware stops accessing it), but
* not for contexts (which need to be preserved when not active for later
* reuse). Note that it is not cleared upon allocation.
*/
struct drm_i915_gem_object *
i915_gem_object_create_internal(struct drm_i915_private *i915,
phys_addr_t size)
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
{
struct drm_i915_gem_object *obj;
drm/i915: Split obj->cache_coherent to track r/w Another month, another story in the cache coherency saga. This time, we come to the realisation that i915_gem_object_is_coherent() has been reporting whether we can read from the target without requiring a cache invalidate; but we were using it in places for testing whether we could write into the object without requiring a cache flush. So split the tracking into two, one to decide before reads, one after writes. See commit e27ab73d17ef ("drm/i915: Mark CPU cache as dirty on every transition for CPU writes") for the previous entry in this saga. v2: Be verbose v3: Remove unused function (i915_gem_object_is_coherent) v4: Fix inverted coherency check prior to execbuf (from v2) v5: Add comment for nasty code where we are optimising on gcc's behalf. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101109 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101555 Testcase: igt/kms_mmap_write_crc Testcase: igt/kms_pwrite_crc Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dongwon Kim <dongwon.kim@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170811111116.10373-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-08-11 11:11:16 +00:00
unsigned int cache_level;
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
GEM_BUG_ON(!size);
GEM_BUG_ON(!IS_ALIGNED(size, PAGE_SIZE));
if (overflows_type(size, obj->base.size))
return ERR_PTR(-E2BIG);
obj = i915_gem_object_alloc(i915);
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
if (!obj)
return ERR_PTR(-ENOMEM);
drm_gem_private_object_init(&i915->drm, &obj->base, size);
i915_gem_object_init(obj, &i915_gem_object_internal_ops);
obj->base.read_domains = I915_GEM_DOMAIN_CPU;
obj->base.write_domain = I915_GEM_DOMAIN_CPU;
drm/i915: Split obj->cache_coherent to track r/w Another month, another story in the cache coherency saga. This time, we come to the realisation that i915_gem_object_is_coherent() has been reporting whether we can read from the target without requiring a cache invalidate; but we were using it in places for testing whether we could write into the object without requiring a cache flush. So split the tracking into two, one to decide before reads, one after writes. See commit e27ab73d17ef ("drm/i915: Mark CPU cache as dirty on every transition for CPU writes") for the previous entry in this saga. v2: Be verbose v3: Remove unused function (i915_gem_object_is_coherent) v4: Fix inverted coherency check prior to execbuf (from v2) v5: Add comment for nasty code where we are optimising on gcc's behalf. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101109 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101555 Testcase: igt/kms_mmap_write_crc Testcase: igt/kms_pwrite_crc Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dongwon Kim <dongwon.kim@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170811111116.10373-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-08-11 11:11:16 +00:00
cache_level = HAS_LLC(i915) ? I915_CACHE_LLC : I915_CACHE_NONE;
i915_gem_object_set_cache_coherency(obj, cache_level);
drm/i915: Introduce an internal allocator for disposable private objects Quite a few of our objects used for internal hardware programming do not benefit from being swappable or from being zero initialised. As such they do not benefit from using a shmemfs backing storage and since they are internal and never directly exposed to the user, we do not need to worry about providing a filp. For these we can use an drm_i915_gem_object wrapper around a sg_table of plain struct page. They are not swap backed and not automatically pinned. If they are reaped by the shrinker, the pages are released and the contents discarded. For the internal use case, this is fine as for example, ringbuffers are pinned from being written by a request to be read by the hardware. Once they are idle, they can be discarded entirely. As such they are a good match for execlist ringbuffers and a small variety of other internal objects. In the first iteration, this is limited to the scratch batch buffers we use (for command parsing and state initialisation). v2: Allocate physically contiguous pages, where possible. v3: Reduce maximum order on subsequent requests following an allocation failure. v4: Fix up mismatch between swiotlb segment size and page count (it counts in 2k units, not 4k pages) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
2016-10-28 12:58:30 +00:00
return obj;
}