mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity
linux-stable/drivers/net/usb/pegasus.c

1500 lines
37 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Copyright (c) 1999-2005 Petko Manolov (petkan@users.sourceforge.net)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* ChangeLog:
* .... Most of the time spent on reading sources & docs.
* v0.2.x First official release for the Linux kernel.
* v0.3.0 Beutified and structured, some bugs fixed.
* v0.3.x URBifying bulk requests and bugfixing. First relatively
* stable release. Still can touch device's registers only
* from top-halves.
* v0.4.0 Control messages remained unurbified are now URBs.
* Now we can touch the HW at any time.
* v0.4.9 Control urbs again use process context to wait. Argh...
* Some long standing bugs (enable_net_traffic) fixed.
* Also nasty trick about resubmiting control urb from
* interrupt context used. Please let me know how it
* behaves. Pegasus II support added since this version.
* TODO: suppressing HCD warnings spewage on disconnect.
* v0.4.13 Ethernet address is now set at probe(), not at open()
* time as this seems to break dhcpd.
* v0.5.0 branch to 2.5.x kernels
* v0.5.1 ethtool support added
* v0.5.5 rx socket buffers are in a pool and the their allocation
* is out of the interrupt routine.
*/
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/module.h>
#include <asm/byteorder.h>
#include <asm/uaccess.h>
#include "pegasus.h"
/*
* Version Information
*/
USB: Pegasus driver failing for ADMtek 8515 network device Address http://bugzilla.kernel.org/show_bug.cgi?id=7126 Attempting to read the ethernet ID directly from the eeprom somehow confuses ADM8515. Subsequent read requests to either the eeprom or the MII fail as well. Didn't dig much deeper, though. For example ADM8513 does not experience this problem. I used the fact that at power up the device is reading its ID automatically (not true for older Pegasus based devices) and put it in the Ethernet ID registers. So now the driver uses get_registers() instead of read_eprom_word() if the device is Pegasus_II based one. Tested it with all (Pegasus and Pegasus_II) gadgets i have and everything seems ok. Cc: <jogeedaklown@yahoo.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27 21:25:37 +00:00
#define DRIVER_VERSION "v0.6.14 (2006/09/27)"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#define DRIVER_AUTHOR "Petko Manolov <petkan@users.sourceforge.net>"
#define DRIVER_DESC "Pegasus/Pegasus II USB Ethernet driver"
static const char driver_name[] = "pegasus";
#undef PEGASUS_WRITE_EEPROM
#define BMSR_MEDIA (BMSR_10HALF | BMSR_10FULL | BMSR_100HALF | \
BMSR_100FULL | BMSR_ANEGCAPABLE)
static int loopback = 0;
static int mii_mode = 0;
[PATCH] USB: usb-net: new device ID passed through module parameter adds new module parameter "devid" that points to a string with format "device_name:vendor_id:device_id:flags". if provided at module load time, this string is being parsed and a new entry is created in usb_dev_id[] and pegasus_ids[] so the new device can later be recognized by the probe routine. this might be helpful for someone who don't know/wish to build new module/kernel, but want to use his new usb-to-eth device that is not yet listed in pegasus.h Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:55:18 +00:00
static char *devid=NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static struct usb_eth_dev usb_dev_id[] = {
#define PEGASUS_DEV(pn, vid, pid, flags) \
{.name = pn, .vendor = vid, .device = pid, .private = flags},
#include "pegasus.h"
#undef PEGASUS_DEV
[PATCH] USB: usb-net: new device ID passed through module parameter adds new module parameter "devid" that points to a string with format "device_name:vendor_id:device_id:flags". if provided at module load time, this string is being parsed and a new entry is created in usb_dev_id[] and pegasus_ids[] so the new device can later be recognized by the probe routine. this might be helpful for someone who don't know/wish to build new module/kernel, but want to use his new usb-to-eth device that is not yet listed in pegasus.h Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:55:18 +00:00
{NULL, 0, 0, 0},
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{NULL, 0, 0, 0}
};
static struct usb_device_id pegasus_ids[] = {
#define PEGASUS_DEV(pn, vid, pid, flags) \
{.match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = vid, .idProduct = pid},
#include "pegasus.h"
#undef PEGASUS_DEV
[PATCH] USB: usb-net: new device ID passed through module parameter adds new module parameter "devid" that points to a string with format "device_name:vendor_id:device_id:flags". if provided at module load time, this string is being parsed and a new entry is created in usb_dev_id[] and pegasus_ids[] so the new device can later be recognized by the probe routine. this might be helpful for someone who don't know/wish to build new module/kernel, but want to use his new usb-to-eth device that is not yet listed in pegasus.h Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:55:18 +00:00
{},
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{}
};
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
module_param(loopback, bool, 0);
module_param(mii_mode, bool, 0);
[PATCH] USB: usb-net: new device ID passed through module parameter adds new module parameter "devid" that points to a string with format "device_name:vendor_id:device_id:flags". if provided at module load time, this string is being parsed and a new entry is created in usb_dev_id[] and pegasus_ids[] so the new device can later be recognized by the probe routine. this might be helpful for someone who don't know/wish to build new module/kernel, but want to use his new usb-to-eth device that is not yet listed in pegasus.h Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:55:18 +00:00
module_param(devid, charp, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
MODULE_PARM_DESC(loopback, "Enable MAC loopback mode (bit 0)");
MODULE_PARM_DESC(mii_mode, "Enable HomePNA mode (bit 0),default=MII mode = 0");
[PATCH] USB: usb-net: new device ID passed through module parameter adds new module parameter "devid" that points to a string with format "device_name:vendor_id:device_id:flags". if provided at module load time, this string is being parsed and a new entry is created in usb_dev_id[] and pegasus_ids[] so the new device can later be recognized by the probe routine. this might be helpful for someone who don't know/wish to build new module/kernel, but want to use his new usb-to-eth device that is not yet listed in pegasus.h Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:55:18 +00:00
MODULE_PARM_DESC(devid, "The format is: 'DEV_name:VendorID:DeviceID:Flags'");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* use ethtool to change the level for any given device */
static int msg_level = -1;
module_param (msg_level, int, 0);
MODULE_PARM_DESC (msg_level, "Override default message level");
MODULE_DEVICE_TABLE(usb, pegasus_ids);
static int update_eth_regs_async(pegasus_t *);
/* Aargh!!! I _really_ hate such tweaks */
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
static void ctrl_callback(struct urb *urb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
pegasus_t *pegasus = urb->context;
if (!pegasus)
return;
switch (urb->status) {
case 0:
if (pegasus->flags & ETH_REGS_CHANGE) {
pegasus->flags &= ~ETH_REGS_CHANGE;
pegasus->flags |= ETH_REGS_CHANGED;
update_eth_regs_async(pegasus);
return;
}
break;
case -EINPROGRESS:
return;
case -ENOENT:
break;
default:
if (netif_msg_drv(pegasus))
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
dev_dbg(&pegasus->intf->dev, "%s, status %d\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
__FUNCTION__, urb->status);
}
pegasus->flags &= ~ETH_REGS_CHANGED;
wake_up(&pegasus->ctrl_wait);
}
static int get_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
void *data)
{
int ret;
char *buffer;
DECLARE_WAITQUEUE(wait, current);
buffer = kmalloc(size, GFP_KERNEL);
if (!buffer) {
if (netif_msg_drv(pegasus))
dev_warn(&pegasus->intf->dev, "out of memory in %s\n",
__FUNCTION__);
return -ENOMEM;
}
add_wait_queue(&pegasus->ctrl_wait, &wait);
set_current_state(TASK_UNINTERRUPTIBLE);
while (pegasus->flags & ETH_REGS_CHANGED)
schedule();
remove_wait_queue(&pegasus->ctrl_wait, &wait);
set_current_state(TASK_RUNNING);
pegasus->dr.bRequestType = PEGASUS_REQT_READ;
pegasus->dr.bRequest = PEGASUS_REQ_GET_REGS;
pegasus->dr.wValue = cpu_to_le16(0);
pegasus->dr.wIndex = cpu_to_le16p(&indx);
pegasus->dr.wLength = cpu_to_le16p(&size);
pegasus->ctrl_urb->transfer_buffer_length = size;
usb_fill_control_urb(pegasus->ctrl_urb, pegasus->usb,
usb_rcvctrlpipe(pegasus->usb, 0),
(char *) &pegasus->dr,
buffer, size, ctrl_callback, pegasus);
add_wait_queue(&pegasus->ctrl_wait, &wait);
set_current_state(TASK_UNINTERRUPTIBLE);
/* using ATOMIC, we'd never wake up if we slept */
if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
USB: pegasus error path not resetting task's state there is an error path in the pegasus driver which can leave the task in TASK_UNINTERRUPTIBLE. Depending on when it schedules next, this can be bad. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-23 14:40:17 +00:00
set_current_state(TASK_RUNNING);
[PATCH] USB: more pegasus log spamming removed Remove more log spamming from pegasus: stop talking to the device once we see ENODEV reported. It may take a while before khubd notifies us. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-26 17:17:03 +00:00
if (ret == -ENODEV)
netif_device_detach(pegasus->net);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (netif_msg_drv(pegasus))
dev_err(&pegasus->intf->dev, "%s, status %d\n",
__FUNCTION__, ret);
goto out;
}
schedule();
out:
remove_wait_queue(&pegasus->ctrl_wait, &wait);
memcpy(data, buffer, size);
kfree(buffer);
return ret;
}
static int set_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
void *data)
{
int ret;
char *buffer;
DECLARE_WAITQUEUE(wait, current);
buffer = kmalloc(size, GFP_KERNEL);
if (!buffer) {
if (netif_msg_drv(pegasus))
dev_warn(&pegasus->intf->dev, "out of memory in %s\n",
__FUNCTION__);
return -ENOMEM;
}
memcpy(buffer, data, size);
add_wait_queue(&pegasus->ctrl_wait, &wait);
set_current_state(TASK_UNINTERRUPTIBLE);
while (pegasus->flags & ETH_REGS_CHANGED)
schedule();
remove_wait_queue(&pegasus->ctrl_wait, &wait);
set_current_state(TASK_RUNNING);
pegasus->dr.bRequestType = PEGASUS_REQT_WRITE;
pegasus->dr.bRequest = PEGASUS_REQ_SET_REGS;
pegasus->dr.wValue = cpu_to_le16(0);
pegasus->dr.wIndex = cpu_to_le16p(&indx);
pegasus->dr.wLength = cpu_to_le16p(&size);
pegasus->ctrl_urb->transfer_buffer_length = size;
usb_fill_control_urb(pegasus->ctrl_urb, pegasus->usb,
usb_sndctrlpipe(pegasus->usb, 0),
(char *) &pegasus->dr,
buffer, size, ctrl_callback, pegasus);
add_wait_queue(&pegasus->ctrl_wait, &wait);
set_current_state(TASK_UNINTERRUPTIBLE);
if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
[PATCH] USB: more pegasus log spamming removed Remove more log spamming from pegasus: stop talking to the device once we see ENODEV reported. It may take a while before khubd notifies us. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-26 17:17:03 +00:00
if (ret == -ENODEV)
netif_device_detach(pegasus->net);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (netif_msg_drv(pegasus))
dev_err(&pegasus->intf->dev, "%s, status %d\n",
__FUNCTION__, ret);
goto out;
}
schedule();
out:
remove_wait_queue(&pegasus->ctrl_wait, &wait);
kfree(buffer);
return ret;
}
static int set_register(pegasus_t * pegasus, __u16 indx, __u8 data)
{
int ret;
char *tmp;
DECLARE_WAITQUEUE(wait, current);
tmp = kmalloc(1, GFP_KERNEL);
if (!tmp) {
if (netif_msg_drv(pegasus))
dev_warn(&pegasus->intf->dev, "out of memory in %s\n",
__FUNCTION__);
return -ENOMEM;
}
memcpy(tmp, &data, 1);
add_wait_queue(&pegasus->ctrl_wait, &wait);
set_current_state(TASK_UNINTERRUPTIBLE);
while (pegasus->flags & ETH_REGS_CHANGED)
schedule();
remove_wait_queue(&pegasus->ctrl_wait, &wait);
set_current_state(TASK_RUNNING);
pegasus->dr.bRequestType = PEGASUS_REQT_WRITE;
pegasus->dr.bRequest = PEGASUS_REQ_SET_REG;
pegasus->dr.wValue = cpu_to_le16(data);
pegasus->dr.wIndex = cpu_to_le16p(&indx);
pegasus->dr.wLength = cpu_to_le16(1);
pegasus->ctrl_urb->transfer_buffer_length = 1;
usb_fill_control_urb(pegasus->ctrl_urb, pegasus->usb,
usb_sndctrlpipe(pegasus->usb, 0),
(char *) &pegasus->dr,
[PATCH] USB: pegasus driver bugfix Attached is a patch that fixes nasty bug, which i am afraid was there for a long time. It was spotted by Andre Draszik <kernel@andred.net>. From: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-30 06:59:22 +00:00
tmp, 1, ctrl_callback, pegasus);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
add_wait_queue(&pegasus->ctrl_wait, &wait);
set_current_state(TASK_UNINTERRUPTIBLE);
if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
[PATCH] USB: more pegasus log spamming removed Remove more log spamming from pegasus: stop talking to the device once we see ENODEV reported. It may take a while before khubd notifies us. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-26 17:17:03 +00:00
if (ret == -ENODEV)
netif_device_detach(pegasus->net);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (netif_msg_drv(pegasus))
dev_err(&pegasus->intf->dev, "%s, status %d\n",
__FUNCTION__, ret);
goto out;
}
schedule();
out:
remove_wait_queue(&pegasus->ctrl_wait, &wait);
kfree(tmp);
return ret;
}
static int update_eth_regs_async(pegasus_t * pegasus)
{
int ret;
pegasus->dr.bRequestType = PEGASUS_REQT_WRITE;
pegasus->dr.bRequest = PEGASUS_REQ_SET_REGS;
pegasus->dr.wValue = 0;
pegasus->dr.wIndex = cpu_to_le16(EthCtrl0);
pegasus->dr.wLength = cpu_to_le16(3);
pegasus->ctrl_urb->transfer_buffer_length = 3;
usb_fill_control_urb(pegasus->ctrl_urb, pegasus->usb,
usb_sndctrlpipe(pegasus->usb, 0),
(char *) &pegasus->dr,
pegasus->eth_regs, 3, ctrl_callback, pegasus);
[PATCH] USB: more pegasus log spamming removed Remove more log spamming from pegasus: stop talking to the device once we see ENODEV reported. It may take a while before khubd notifies us. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-26 17:17:03 +00:00
if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
if (ret == -ENODEV)
netif_device_detach(pegasus->net);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (netif_msg_drv(pegasus))
dev_err(&pegasus->intf->dev, "%s, status %d\n",
__FUNCTION__, ret);
[PATCH] USB: more pegasus log spamming removed Remove more log spamming from pegasus: stop talking to the device once we see ENODEV reported. It may take a while before khubd notifies us. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-26 17:17:03 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return ret;
}
usb-net/pegasus: fix pegasus carrier detection Broken by 4a1728a28a193aa388900714bbb1f375e08a6d8e which switched the return semantics of read_mii_word() but didn't fix usage of read_mii_word() to conform to the new semantics. Setting carrier to off based on the NO_CARRIER flag is also incorrect as that flag only triggers on TX failure and therefore isn't correct when no frames are being transmitted. Since there is already a 2*HZ MII carrier check going on, defer to that. Add a TRUST_LINK_STATUS feature flag for adapters where the LINK_STATUS flag is actually correct, and use that rather than the NO_CARRIER flag. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-24 14:20:06 +00:00
/* Returns 0 on success, error on failure */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
{
int i;
__u8 data[4] = { phy, 0, 0, indx };
__le16 regdi;
int ret;
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
set_register(pegasus, PhyCtrl, 0);
set_registers(pegasus, PhyAddr, sizeof (data), data);
set_register(pegasus, PhyCtrl, (indx | PHY_READ));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
for (i = 0; i < REG_TIMEOUT; i++) {
ret = get_registers(pegasus, PhyCtrl, 1, data);
[PATCH] USB: pegasus fixes (logstorm, suspend) Teach "pegasus" to handle a few of the disconnect fault paths without hundreds of usless syslog messages. Handle the carrier check workqueue entry even if the driver has not been opened. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-01 21:02:45 +00:00
if (ret == -ESHUTDOWN)
goto fail;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (data[0] & PHY_DONE)
break;
}
if (i < REG_TIMEOUT) {
ret = get_registers(pegasus, PhyData, 2, &regdi);
*regd = le16_to_cpu(regdi);
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[PATCH] USB: pegasus fixes (logstorm, suspend) Teach "pegasus" to handle a few of the disconnect fault paths without hundreds of usless syslog messages. Handle the carrier check workqueue entry even if the driver has not been opened. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-01 21:02:45 +00:00
fail:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (netif_msg_drv(pegasus))
USB: Pegasus driver failing for ADMtek 8515 network device Address http://bugzilla.kernel.org/show_bug.cgi?id=7126 Attempting to read the ethernet ID directly from the eeprom somehow confuses ADM8515. Subsequent read requests to either the eeprom or the MII fail as well. Didn't dig much deeper, though. For example ADM8513 does not experience this problem. I used the fact that at power up the device is reading its ID automatically (not true for older Pegasus based devices) and put it in the Ethernet ID registers. So now the driver uses get_registers() instead of read_eprom_word() if the device is Pegasus_II based one. Tested it with all (Pegasus and Pegasus_II) gadgets i have and everything seems ok. Cc: <jogeedaklown@yahoo.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27 21:25:37 +00:00
dev_warn(&pegasus->intf->dev, "%s failed\n", __FUNCTION__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static int mdio_read(struct net_device *dev, int phy_id, int loc)
{
pegasus_t *pegasus = (pegasus_t *) netdev_priv(dev);
u16 res;
read_mii_word(pegasus, phy_id, loc, &res);
return (int)res;
}
static int write_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 regd)
{
int i;
__u8 data[4] = { phy, 0, 0, indx };
int ret;
data[1] = (u8) regd;
data[2] = (u8) (regd >> 8);
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
set_register(pegasus, PhyCtrl, 0);
set_registers(pegasus, PhyAddr, sizeof(data), data);
set_register(pegasus, PhyCtrl, (indx | PHY_WRITE));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
for (i = 0; i < REG_TIMEOUT; i++) {
ret = get_registers(pegasus, PhyCtrl, 1, data);
[PATCH] USB: pegasus fixes (logstorm, suspend) Teach "pegasus" to handle a few of the disconnect fault paths without hundreds of usless syslog messages. Handle the carrier check workqueue entry even if the driver has not been opened. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-01 21:02:45 +00:00
if (ret == -ESHUTDOWN)
goto fail;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (data[0] & PHY_DONE)
break;
}
if (i < REG_TIMEOUT)
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] USB: pegasus fixes (logstorm, suspend) Teach "pegasus" to handle a few of the disconnect fault paths without hundreds of usless syslog messages. Handle the carrier check workqueue entry even if the driver has not been opened. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-01 21:02:45 +00:00
fail:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (netif_msg_drv(pegasus))
USB: Pegasus driver failing for ADMtek 8515 network device Address http://bugzilla.kernel.org/show_bug.cgi?id=7126 Attempting to read the ethernet ID directly from the eeprom somehow confuses ADM8515. Subsequent read requests to either the eeprom or the MII fail as well. Didn't dig much deeper, though. For example ADM8513 does not experience this problem. I used the fact that at power up the device is reading its ID automatically (not true for older Pegasus based devices) and put it in the Ethernet ID registers. So now the driver uses get_registers() instead of read_eprom_word() if the device is Pegasus_II based one. Tested it with all (Pegasus and Pegasus_II) gadgets i have and everything seems ok. Cc: <jogeedaklown@yahoo.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27 21:25:37 +00:00
dev_warn(&pegasus->intf->dev, "%s failed\n", __FUNCTION__);
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
return -ETIMEDOUT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static void mdio_write(struct net_device *dev, int phy_id, int loc, int val)
{
pegasus_t *pegasus = (pegasus_t *) netdev_priv(dev);
write_mii_word(pegasus, phy_id, loc, val);
}
static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
{
int i;
__u8 tmp;
__le16 retdatai;
int ret;
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
set_register(pegasus, EpromCtrl, 0);
set_register(pegasus, EpromOffset, index);
set_register(pegasus, EpromCtrl, EPROM_READ);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
for (i = 0; i < REG_TIMEOUT; i++) {
ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
if (tmp & EPROM_DONE)
break;
[PATCH] USB: pegasus fixes (logstorm, suspend) Teach "pegasus" to handle a few of the disconnect fault paths without hundreds of usless syslog messages. Handle the carrier check workqueue entry even if the driver has not been opened. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-01 21:02:45 +00:00
if (ret == -ESHUTDOWN)
goto fail;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
if (i < REG_TIMEOUT) {
ret = get_registers(pegasus, EpromData, 2, &retdatai);
*retdata = le16_to_cpu(retdatai);
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[PATCH] USB: pegasus fixes (logstorm, suspend) Teach "pegasus" to handle a few of the disconnect fault paths without hundreds of usless syslog messages. Handle the carrier check workqueue entry even if the driver has not been opened. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-01 21:02:45 +00:00
fail:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (netif_msg_drv(pegasus))
USB: Pegasus driver failing for ADMtek 8515 network device Address http://bugzilla.kernel.org/show_bug.cgi?id=7126 Attempting to read the ethernet ID directly from the eeprom somehow confuses ADM8515. Subsequent read requests to either the eeprom or the MII fail as well. Didn't dig much deeper, though. For example ADM8513 does not experience this problem. I used the fact that at power up the device is reading its ID automatically (not true for older Pegasus based devices) and put it in the Ethernet ID registers. So now the driver uses get_registers() instead of read_eprom_word() if the device is Pegasus_II based one. Tested it with all (Pegasus and Pegasus_II) gadgets i have and everything seems ok. Cc: <jogeedaklown@yahoo.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27 21:25:37 +00:00
dev_warn(&pegasus->intf->dev, "%s failed\n", __FUNCTION__);
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
return -ETIMEDOUT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
#ifdef PEGASUS_WRITE_EEPROM
static inline void enable_eprom_write(pegasus_t * pegasus)
{
__u8 tmp;
int ret;
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
get_registers(pegasus, EthCtrl2, 1, &tmp);
set_register(pegasus, EthCtrl2, tmp | EPROM_WR_ENABLE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static inline void disable_eprom_write(pegasus_t * pegasus)
{
__u8 tmp;
int ret;
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
get_registers(pegasus, EthCtrl2, 1, &tmp);
set_register(pegasus, EpromCtrl, 0);
set_register(pegasus, EthCtrl2, tmp & ~EPROM_WR_ENABLE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data)
{
int i;
__u8 tmp, d[4] = { 0x3f, 0, 0, EPROM_WRITE };
int ret;
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
set_registers(pegasus, EpromOffset, 4, d);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
enable_eprom_write(pegasus);
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
set_register(pegasus, EpromOffset, index);
set_registers(pegasus, EpromData, 2, &data);
set_register(pegasus, EpromCtrl, EPROM_WRITE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
for (i = 0; i < REG_TIMEOUT; i++) {
ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
[PATCH] USB: pegasus fixes (logstorm, suspend) Teach "pegasus" to handle a few of the disconnect fault paths without hundreds of usless syslog messages. Handle the carrier check workqueue entry even if the driver has not been opened. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-01 21:02:45 +00:00
if (ret == -ESHUTDOWN)
goto fail;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (tmp & EPROM_DONE)
break;
}
disable_eprom_write(pegasus);
if (i < REG_TIMEOUT)
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
return ret;
[PATCH] USB: pegasus fixes (logstorm, suspend) Teach "pegasus" to handle a few of the disconnect fault paths without hundreds of usless syslog messages. Handle the carrier check workqueue entry even if the driver has not been opened. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-01 21:02:45 +00:00
fail:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (netif_msg_drv(pegasus))
USB: Pegasus driver failing for ADMtek 8515 network device Address http://bugzilla.kernel.org/show_bug.cgi?id=7126 Attempting to read the ethernet ID directly from the eeprom somehow confuses ADM8515. Subsequent read requests to either the eeprom or the MII fail as well. Didn't dig much deeper, though. For example ADM8513 does not experience this problem. I used the fact that at power up the device is reading its ID automatically (not true for older Pegasus based devices) and put it in the Ethernet ID registers. So now the driver uses get_registers() instead of read_eprom_word() if the device is Pegasus_II based one. Tested it with all (Pegasus and Pegasus_II) gadgets i have and everything seems ok. Cc: <jogeedaklown@yahoo.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27 21:25:37 +00:00
dev_warn(&pegasus->intf->dev, "%s failed\n", __FUNCTION__);
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
return -ETIMEDOUT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
#endif /* PEGASUS_WRITE_EEPROM */
static inline void get_node_id(pegasus_t * pegasus, __u8 * id)
{
int i;
__u16 w16;
for (i = 0; i < 3; i++) {
read_eprom_word(pegasus, i, &w16);
((__le16 *) id)[i] = cpu_to_le16p(&w16);
}
}
static void set_ethernet_addr(pegasus_t * pegasus)
{
__u8 node_id[6];
USB: Pegasus driver failing for ADMtek 8515 network device Address http://bugzilla.kernel.org/show_bug.cgi?id=7126 Attempting to read the ethernet ID directly from the eeprom somehow confuses ADM8515. Subsequent read requests to either the eeprom or the MII fail as well. Didn't dig much deeper, though. For example ADM8513 does not experience this problem. I used the fact that at power up the device is reading its ID automatically (not true for older Pegasus based devices) and put it in the Ethernet ID registers. So now the driver uses get_registers() instead of read_eprom_word() if the device is Pegasus_II based one. Tested it with all (Pegasus and Pegasus_II) gadgets i have and everything seems ok. Cc: <jogeedaklown@yahoo.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27 21:25:37 +00:00
if (pegasus->features & PEGASUS_II) {
get_registers(pegasus, 0x10, sizeof(node_id), node_id);
} else {
get_node_id(pegasus, node_id);
set_registers(pegasus, EthID, sizeof (node_id), node_id);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
memcpy(pegasus->net->dev_addr, node_id, sizeof (node_id));
}
static inline int reset_mac(pegasus_t * pegasus)
{
__u8 data = 0x8;
int i;
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
set_register(pegasus, EthCtrl1, data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
for (i = 0; i < REG_TIMEOUT; i++) {
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
get_registers(pegasus, EthCtrl1, 1, &data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (~data & 0x08) {
if (loopback & 1)
break;
if (mii_mode && (pegasus->features & HAS_HOME_PNA))
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
set_register(pegasus, Gpio1, 0x34);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
else
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
set_register(pegasus, Gpio1, 0x26);
set_register(pegasus, Gpio0, pegasus->features);
set_register(pegasus, Gpio0, DEFAULT_GPIO_SET);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
}
}
if (i == REG_TIMEOUT)
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
return -ETIMEDOUT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS ||
usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) {
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
set_register(pegasus, Gpio0, 0x24);
set_register(pegasus, Gpio0, 0x26);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_ELCON) {
__u16 auxmode;
read_mii_word(pegasus, 3, 0x1b, &auxmode);
write_mii_word(pegasus, 3, 0x1b, auxmode | 4);
}
return 0;
}
static int enable_net_traffic(struct net_device *dev, struct usb_device *usb)
{
__u16 linkpart;
__u8 data[4];
pegasus_t *pegasus = netdev_priv(dev);
int ret;
read_mii_word(pegasus, pegasus->phy, MII_LPA, &linkpart);
data[0] = 0xc9;
data[1] = 0;
if (linkpart & (ADVERTISE_100FULL | ADVERTISE_10FULL))
data[1] |= 0x20; /* set full duplex */
if (linkpart & (ADVERTISE_100FULL | ADVERTISE_100HALF))
data[1] |= 0x10; /* set 100 Mbps */
if (mii_mode)
data[1] = 0;
data[2] = (loopback & 1) ? 0x09 : 0x01;
memcpy(pegasus->eth_regs, data, sizeof (data));
ret = set_registers(pegasus, EthCtrl0, 3, data);
if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS ||
[PATCH] USB: Pegasus: Linksys USBVPN1 support + cleanup This patch adds a second linksys vendor-id (077b) and the product id of the pegasus based adapter USBVPN1 http://www1.linksys.com/Products/product.asp?prid=3D543&scid=3D30 Furthermore it replaces all LINKSYS_GPIO_RESET with DEFAULT_GPIO_RESET as both are declared like this: #define DEFAULT_GPIO_RESET 0x24 #define LINKSYS_GPIO_RESET 0x24 This is misleading and confusing. The check is now done via the VENDOR_ID in pegasus.c: if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS Signed-off-by: Malte Doersam <mdoersam@arcor.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-28 16:48:33 +00:00
usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS2 ||
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) {
u16 auxmode;
read_mii_word(pegasus, 0, 0x1b, &auxmode);
write_mii_word(pegasus, 0, 0x1b, auxmode | 4);
}
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static void fill_skb_pool(pegasus_t * pegasus)
{
int i;
for (i = 0; i < RX_SKBS; i++) {
if (pegasus->rx_pool[i])
continue;
pegasus->rx_pool[i] = dev_alloc_skb(PEGASUS_MTU + 2);
/*
** we give up if the allocation fail. the tasklet will be
** rescheduled again anyway...
*/
if (pegasus->rx_pool[i] == NULL)
return;
skb_reserve(pegasus->rx_pool[i], 2);
}
}
static void free_skb_pool(pegasus_t * pegasus)
{
int i;
for (i = 0; i < RX_SKBS; i++) {
if (pegasus->rx_pool[i]) {
dev_kfree_skb(pegasus->rx_pool[i]);
pegasus->rx_pool[i] = NULL;
}
}
}
static inline struct sk_buff *pull_skb(pegasus_t * pegasus)
{
int i;
struct sk_buff *skb;
for (i = 0; i < RX_SKBS; i++) {
if (likely(pegasus->rx_pool[i] != NULL)) {
skb = pegasus->rx_pool[i];
pegasus->rx_pool[i] = NULL;
return skb;
}
}
return NULL;
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
static void read_bulk_callback(struct urb *urb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
pegasus_t *pegasus = urb->context;
struct net_device *net;
int rx_status, count = urb->actual_length;
u8 *buf = urb->transfer_buffer;
__u16 pkt_len;
if (!pegasus)
return;
net = pegasus->net;
if (!netif_device_present(net) || !netif_running(net))
return;
switch (urb->status) {
case 0:
break;
USB: Dealias -110 code (more complete) The purpose of this patch is to split off the case when a device does not reply on the lower level (which is reported by HC hardware), and a case when the device accepted the request, but does not reply at upper level. This redefinition allows to diagnose issues easier, without asking the user if the -110 happened "immediately". The usbmon splits such cases already thanks to its timestamp, but it's not always available. I adjusted all drivers which I found affected (by searching for "urb"). Out of tree drivers may suffer a little bit, but I do not expect much breakage. At worst they may print a few messages. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-19 05:49:02 +00:00
case -ETIME:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (netif_msg_rx_err(pegasus))
pr_debug("%s: reset MAC\n", net->name);
pegasus->flags &= ~PEGASUS_RX_BUSY;
break;
case -EPIPE: /* stall, or disconnect from TT */
/* FIXME schedule work to clear the halt */
if (netif_msg_rx_err(pegasus))
printk(KERN_WARNING "%s: no rx stall recovery\n",
net->name);
return;
case -ENOENT:
case -ECONNRESET:
case -ESHUTDOWN:
if (netif_msg_ifdown(pegasus))
pr_debug("%s: rx unlink, %d\n", net->name, urb->status);
return;
default:
if (netif_msg_rx_err(pegasus))
pr_debug("%s: RX status %d\n", net->name, urb->status);
goto goon;
}
if (!count || count < 4)
goto goon;
rx_status = buf[count - 2];
if (rx_status & 0x1e) {
if (netif_msg_rx_err(pegasus))
pr_debug("%s: RX packet error %x\n",
net->name, rx_status);
pegasus->stats.rx_errors++;
if (rx_status & 0x06) // long or runt
pegasus->stats.rx_length_errors++;
if (rx_status & 0x08)
pegasus->stats.rx_crc_errors++;
if (rx_status & 0x10) // extra bits
pegasus->stats.rx_frame_errors++;
goto goon;
}
if (pegasus->chip == 0x8513) {
pkt_len = le32_to_cpu(*(__le32 *)urb->transfer_buffer);
pkt_len &= 0x0fff;
pegasus->rx_skb->data += 2;
} else {
pkt_len = buf[count - 3] << 8;
pkt_len += buf[count - 4];
pkt_len &= 0xfff;
pkt_len -= 8;
}
[PATCH] USB: fix pegasus driver Addresses some small bugs in the pegasus ethernet-over-USB driver. Specifically, malformed long packets from the adapter could cause a kernel panic; the interrupt interval calculation was inappropriate for high-speed devices; the return code from read_mii_word was tested incorrectly; and failure to unlink outstanding URBs before freeing them could lead to kernel panics when unloading the driver. Signed-off-by: Kevin Vigor <kevin@realmsys.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:49:24 +00:00
/*
* If the packet is unreasonably long, quietly drop it rather than
* kernel panicing by calling skb_put.
*/
if (pkt_len > PEGASUS_MTU)
goto goon;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* at this point we are sure pegasus->rx_skb != NULL
* so we go ahead and pass up the packet.
*/
skb_put(pegasus->rx_skb, pkt_len);
pegasus->rx_skb->protocol = eth_type_trans(pegasus->rx_skb, net);
netif_rx(pegasus->rx_skb);
pegasus->stats.rx_packets++;
pegasus->stats.rx_bytes += pkt_len;
if (pegasus->flags & PEGASUS_UNPLUG)
return;
spin_lock(&pegasus->rx_pool_lock);
pegasus->rx_skb = pull_skb(pegasus);
spin_unlock(&pegasus->rx_pool_lock);
if (pegasus->rx_skb == NULL)
goto tl_sched;
goon:
usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
usb_rcvbulkpipe(pegasus->usb, 1),
pegasus->rx_skb->data, PEGASUS_MTU + 8,
read_bulk_callback, pegasus);
[PATCH] USB: more pegasus log spamming removed Remove more log spamming from pegasus: stop talking to the device once we see ENODEV reported. It may take a while before khubd notifies us. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-26 17:17:03 +00:00
rx_status = usb_submit_urb(pegasus->rx_urb, GFP_ATOMIC);
if (rx_status == -ENODEV)
netif_device_detach(pegasus->net);
else if (rx_status) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pegasus->flags |= PEGASUS_RX_URB_FAIL;
goto tl_sched;
} else {
pegasus->flags &= ~PEGASUS_RX_URB_FAIL;
}
return;
tl_sched:
tasklet_schedule(&pegasus->rx_tl);
}
static void rx_fixup(unsigned long data)
{
pegasus_t *pegasus;
unsigned long flags;
[PATCH] USB: more pegasus log spamming removed Remove more log spamming from pegasus: stop talking to the device once we see ENODEV reported. It may take a while before khubd notifies us. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-26 17:17:03 +00:00
int status;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pegasus = (pegasus_t *) data;
if (pegasus->flags & PEGASUS_UNPLUG)
return;
spin_lock_irqsave(&pegasus->rx_pool_lock, flags);
fill_skb_pool(pegasus);
if (pegasus->flags & PEGASUS_RX_URB_FAIL)
if (pegasus->rx_skb)
goto try_again;
if (pegasus->rx_skb == NULL) {
pegasus->rx_skb = pull_skb(pegasus);
}
if (pegasus->rx_skb == NULL) {
if (netif_msg_rx_err(pegasus))
printk(KERN_WARNING "%s: low on memory\n",
pegasus->net->name);
tasklet_schedule(&pegasus->rx_tl);
goto done;
}
usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
usb_rcvbulkpipe(pegasus->usb, 1),
pegasus->rx_skb->data, PEGASUS_MTU + 8,
read_bulk_callback, pegasus);
try_again:
[PATCH] USB: more pegasus log spamming removed Remove more log spamming from pegasus: stop talking to the device once we see ENODEV reported. It may take a while before khubd notifies us. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-26 17:17:03 +00:00
status = usb_submit_urb(pegasus->rx_urb, GFP_ATOMIC);
if (status == -ENODEV)
netif_device_detach(pegasus->net);
else if (status) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pegasus->flags |= PEGASUS_RX_URB_FAIL;
tasklet_schedule(&pegasus->rx_tl);
} else {
pegasus->flags &= ~PEGASUS_RX_URB_FAIL;
}
done:
spin_unlock_irqrestore(&pegasus->rx_pool_lock, flags);
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
static void write_bulk_callback(struct urb *urb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
pegasus_t *pegasus = urb->context;
Fix a potential NULL pointer dereference in write_bulk_callback() in drivers/net/usb/pegasus.c This patch fixes a potential null dereference bug where we dereference pegasus before a null check. This patch simply moves the dereferencing after the null check. Signed-off-by: Micah Gruber <micah.gruber@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-23 08:05:52 +00:00
struct net_device *net;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!pegasus)
return;
Fix a potential NULL pointer dereference in write_bulk_callback() in drivers/net/usb/pegasus.c This patch fixes a potential null dereference bug where we dereference pegasus before a null check. This patch simply moves the dereferencing after the null check. Signed-off-by: Micah Gruber <micah.gruber@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-23 08:05:52 +00:00
net = pegasus->net;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (!netif_device_present(net) || !netif_running(net))
return;
switch (urb->status) {
case -EPIPE:
/* FIXME schedule_work() to clear the tx halt */
netif_stop_queue(net);
if (netif_msg_tx_err(pegasus))
printk(KERN_WARNING "%s: no tx stall recovery\n",
net->name);
return;
case -ENOENT:
case -ECONNRESET:
case -ESHUTDOWN:
if (netif_msg_ifdown(pegasus))
pr_debug("%s: tx unlink, %d\n", net->name, urb->status);
return;
default:
if (netif_msg_tx_err(pegasus))
pr_info("%s: TX status %d\n", net->name, urb->status);
/* FALL THROUGH */
case 0:
break;
}
net->trans_start = jiffies;
netif_wake_queue(net);
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
static void intr_callback(struct urb *urb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
pegasus_t *pegasus = urb->context;
struct net_device *net;
int status;
if (!pegasus)
return;
net = pegasus->net;
switch (urb->status) {
case 0:
break;
case -ECONNRESET: /* unlink */
case -ENOENT:
case -ESHUTDOWN:
return;
default:
/* some Pegasus-I products report LOTS of data
* toggle errors... avoid log spamming
*/
if (netif_msg_timer(pegasus))
pr_debug("%s: intr status %d\n", net->name,
urb->status);
}
if (urb->actual_length >= 6) {
u8 * d = urb->transfer_buffer;
/* byte 0 == tx_status1, reg 2B */
if (d[0] & (TX_UNDERRUN|EXCESSIVE_COL
|LATE_COL|JABBER_TIMEOUT)) {
pegasus->stats.tx_errors++;
if (d[0] & TX_UNDERRUN)
pegasus->stats.tx_fifo_errors++;
if (d[0] & (EXCESSIVE_COL | JABBER_TIMEOUT))
pegasus->stats.tx_aborted_errors++;
if (d[0] & LATE_COL)
pegasus->stats.tx_window_errors++;
}
/* d[5].LINK_STATUS lies on some adapters.
* d[0].NO_CARRIER kicks in only with failed TX.
* ... so monitoring with MII may be safest.
*/
/* bytes 3-4 == rx_lostpkt, reg 2E/2F */
pegasus->stats.rx_missed_errors += ((d[3] & 0x7f) << 8) | d[4];
}
[PATCH] slab: remove SLAB_ATOMIC SLAB_ATOMIC is an alias of GFP_ATOMIC Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 04:33:16 +00:00
status = usb_submit_urb(urb, GFP_ATOMIC);
[PATCH] USB: more pegasus log spamming removed Remove more log spamming from pegasus: stop talking to the device once we see ENODEV reported. It may take a while before khubd notifies us. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-26 17:17:03 +00:00
if (status == -ENODEV)
netif_device_detach(pegasus->net);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (status && netif_msg_timer(pegasus))
printk(KERN_ERR "%s: can't resubmit interrupt urb, %d\n",
net->name, status);
}
static void pegasus_tx_timeout(struct net_device *net)
{
pegasus_t *pegasus = netdev_priv(net);
if (netif_msg_timer(pegasus))
printk(KERN_WARNING "%s: tx timeout\n", net->name);
usb_unlink_urb(pegasus->tx_urb);
pegasus->stats.tx_errors++;
}
static int pegasus_start_xmit(struct sk_buff *skb, struct net_device *net)
{
pegasus_t *pegasus = netdev_priv(net);
int count = ((skb->len + 2) & 0x3f) ? skb->len + 2 : skb->len + 3;
int res;
__u16 l16 = skb->len;
netif_stop_queue(net);
((__le16 *) pegasus->tx_buff)[0] = cpu_to_le16(l16);
[SK_BUFF]: Introduce skb_copy_from_linear_data{_offset} To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-03-27 21:55:52 +00:00
skb_copy_from_linear_data(skb, pegasus->tx_buff + 2, skb->len);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
usb_fill_bulk_urb(pegasus->tx_urb, pegasus->usb,
usb_sndbulkpipe(pegasus->usb, 2),
pegasus->tx_buff, count,
write_bulk_callback, pegasus);
if ((res = usb_submit_urb(pegasus->tx_urb, GFP_ATOMIC))) {
if (netif_msg_tx_err(pegasus))
printk(KERN_WARNING "%s: fail tx, %d\n",
net->name, res);
switch (res) {
case -EPIPE: /* stall, or disconnect from TT */
/* cleanup should already have been scheduled */
break;
case -ENODEV: /* disconnect() upcoming */
[PATCH] USB: more pegasus log spamming removed Remove more log spamming from pegasus: stop talking to the device once we see ENODEV reported. It may take a while before khubd notifies us. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-26 17:17:03 +00:00
netif_device_detach(pegasus->net);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
default:
pegasus->stats.tx_errors++;
netif_start_queue(net);
}
} else {
pegasus->stats.tx_packets++;
pegasus->stats.tx_bytes += skb->len;
net->trans_start = jiffies;
}
dev_kfree_skb(skb);
return 0;
}
static struct net_device_stats *pegasus_netdev_stats(struct net_device *dev)
{
return &((pegasus_t *) netdev_priv(dev))->stats;
}
static inline void disable_net_traffic(pegasus_t * pegasus)
{
int tmp = 0;
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
set_registers(pegasus, EthCtrl0, 2, &tmp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static inline void get_interrupt_interval(pegasus_t * pegasus)
{
__u8 data[2];
read_eprom_word(pegasus, 4, (__u16 *) data);
[PATCH] USB: fix pegasus driver Addresses some small bugs in the pegasus ethernet-over-USB driver. Specifically, malformed long packets from the adapter could cause a kernel panic; the interrupt interval calculation was inappropriate for high-speed devices; the return code from read_mii_word was tested incorrectly; and failure to unlink outstanding URBs before freeing them could lead to kernel panics when unloading the driver. Signed-off-by: Kevin Vigor <kevin@realmsys.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:49:24 +00:00
if (pegasus->usb->speed != USB_SPEED_HIGH) {
if (data[1] < 0x80) {
if (netif_msg_timer(pegasus))
dev_info(&pegasus->intf->dev, "intr interval "
"changed from %ums to %ums\n",
data[1], 0x80);
data[1] = 0x80;
#ifdef PEGASUS_WRITE_EEPROM
write_eprom_word(pegasus, 4, *(__u16 *) data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
[PATCH] USB: fix pegasus driver Addresses some small bugs in the pegasus ethernet-over-USB driver. Specifically, malformed long packets from the adapter could cause a kernel panic; the interrupt interval calculation was inappropriate for high-speed devices; the return code from read_mii_word was tested incorrectly; and failure to unlink outstanding URBs before freeing them could lead to kernel panics when unloading the driver. Signed-off-by: Kevin Vigor <kevin@realmsys.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:49:24 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
pegasus->intr_interval = data[1];
}
static void set_carrier(struct net_device *net)
{
pegasus_t *pegasus = netdev_priv(net);
u16 tmp;
usb-net/pegasus: fix pegasus carrier detection Broken by 4a1728a28a193aa388900714bbb1f375e08a6d8e which switched the return semantics of read_mii_word() but didn't fix usage of read_mii_word() to conform to the new semantics. Setting carrier to off based on the NO_CARRIER flag is also incorrect as that flag only triggers on TX failure and therefore isn't correct when no frames are being transmitted. Since there is already a 2*HZ MII carrier check going on, defer to that. Add a TRUST_LINK_STATUS feature flag for adapters where the LINK_STATUS flag is actually correct, and use that rather than the NO_CARRIER flag. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-24 14:20:06 +00:00
if (read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return;
[PATCH] USB: fix pegasus driver Addresses some small bugs in the pegasus ethernet-over-USB driver. Specifically, malformed long packets from the adapter could cause a kernel panic; the interrupt interval calculation was inappropriate for high-speed devices; the return code from read_mii_word was tested incorrectly; and failure to unlink outstanding URBs before freeing them could lead to kernel panics when unloading the driver. Signed-off-by: Kevin Vigor <kevin@realmsys.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:49:24 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (tmp & BMSR_LSTATUS)
netif_carrier_on(net);
else
netif_carrier_off(net);
}
static void free_all_urbs(pegasus_t * pegasus)
{
usb_free_urb(pegasus->intr_urb);
usb_free_urb(pegasus->tx_urb);
usb_free_urb(pegasus->rx_urb);
usb_free_urb(pegasus->ctrl_urb);
}
static void unlink_all_urbs(pegasus_t * pegasus)
{
usb_kill_urb(pegasus->intr_urb);
usb_kill_urb(pegasus->tx_urb);
usb_kill_urb(pegasus->rx_urb);
usb_kill_urb(pegasus->ctrl_urb);
}
static int alloc_urbs(pegasus_t * pegasus)
{
pegasus->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!pegasus->ctrl_urb) {
return 0;
}
pegasus->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!pegasus->rx_urb) {
usb_free_urb(pegasus->ctrl_urb);
return 0;
}
pegasus->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!pegasus->tx_urb) {
usb_free_urb(pegasus->rx_urb);
usb_free_urb(pegasus->ctrl_urb);
return 0;
}
pegasus->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!pegasus->intr_urb) {
usb_free_urb(pegasus->tx_urb);
usb_free_urb(pegasus->rx_urb);
usb_free_urb(pegasus->ctrl_urb);
return 0;
}
return 1;
}
static int pegasus_open(struct net_device *net)
{
pegasus_t *pegasus = netdev_priv(net);
int res;
if (pegasus->rx_skb == NULL)
pegasus->rx_skb = pull_skb(pegasus);
/*
** Note: no point to free the pool. it is empty :-)
*/
if (!pegasus->rx_skb)
return -ENOMEM;
res = set_registers(pegasus, EthID, 6, net->dev_addr);
usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
usb_rcvbulkpipe(pegasus->usb, 1),
pegasus->rx_skb->data, PEGASUS_MTU + 8,
read_bulk_callback, pegasus);
if ((res = usb_submit_urb(pegasus->rx_urb, GFP_KERNEL))) {
[PATCH] USB: more pegasus log spamming removed Remove more log spamming from pegasus: stop talking to the device once we see ENODEV reported. It may take a while before khubd notifies us. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-26 17:17:03 +00:00
if (res == -ENODEV)
netif_device_detach(pegasus->net);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (netif_msg_ifup(pegasus))
pr_debug("%s: failed rx_urb, %d", net->name, res);
goto exit;
}
usb_fill_int_urb(pegasus->intr_urb, pegasus->usb,
usb_rcvintpipe(pegasus->usb, 3),
pegasus->intr_buff, sizeof (pegasus->intr_buff),
intr_callback, pegasus, pegasus->intr_interval);
if ((res = usb_submit_urb(pegasus->intr_urb, GFP_KERNEL))) {
[PATCH] USB: more pegasus log spamming removed Remove more log spamming from pegasus: stop talking to the device once we see ENODEV reported. It may take a while before khubd notifies us. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-26 17:17:03 +00:00
if (res == -ENODEV)
netif_device_detach(pegasus->net);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (netif_msg_ifup(pegasus))
pr_debug("%s: failed intr_urb, %d\n", net->name, res);
usb_kill_urb(pegasus->rx_urb);
goto exit;
}
if ((res = enable_net_traffic(net, pegasus->usb))) {
if (netif_msg_ifup(pegasus))
pr_debug("%s: can't enable_net_traffic() - %d\n",
net->name, res);
res = -EIO;
usb_kill_urb(pegasus->rx_urb);
usb_kill_urb(pegasus->intr_urb);
free_skb_pool(pegasus);
goto exit;
}
set_carrier(net);
netif_start_queue(net);
if (netif_msg_ifup(pegasus))
pr_debug("%s: open\n", net->name);
res = 0;
exit:
return res;
}
static int pegasus_close(struct net_device *net)
{
pegasus_t *pegasus = netdev_priv(net);
netif_stop_queue(net);
if (!(pegasus->flags & PEGASUS_UNPLUG))
disable_net_traffic(pegasus);
tasklet_kill(&pegasus->rx_tl);
unlink_all_urbs(pegasus);
return 0;
}
static void pegasus_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
pegasus_t *pegasus = netdev_priv(dev);
strncpy(info->driver, driver_name, sizeof (info->driver) - 1);
strncpy(info->version, DRIVER_VERSION, sizeof (info->version) - 1);
usb_make_path(pegasus->usb, info->bus_info, sizeof (info->bus_info));
}
/* also handles three patterns of some kind in hardware */
#define WOL_SUPPORTED (WAKE_MAGIC|WAKE_PHY)
static void
pegasus_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
pegasus_t *pegasus = netdev_priv(dev);
wol->supported = WAKE_MAGIC | WAKE_PHY;
wol->wolopts = pegasus->wolopts;
}
static int
pegasus_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
pegasus_t *pegasus = netdev_priv(dev);
u8 reg78 = 0x04;
if (wol->wolopts & ~WOL_SUPPORTED)
return -EINVAL;
if (wol->wolopts & WAKE_MAGIC)
reg78 |= 0x80;
if (wol->wolopts & WAKE_PHY)
reg78 |= 0x40;
/* FIXME this 0x10 bit still needs to get set in the chip... */
if (wol->wolopts)
pegasus->eth_regs[0] |= 0x10;
else
pegasus->eth_regs[0] &= ~0x10;
pegasus->wolopts = wol->wolopts;
return set_register(pegasus, WakeupControl, reg78);
}
static inline void pegasus_reset_wol(struct net_device *dev)
{
struct ethtool_wolinfo wol;
memset(&wol, 0, sizeof wol);
(void) pegasus_set_wol(dev, &wol);
}
static int
pegasus_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
pegasus_t *pegasus;
pegasus = netdev_priv(dev);
mii_ethtool_gset(&pegasus->mii, ecmd);
return 0;
}
static int
pegasus_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
pegasus_t *pegasus = netdev_priv(dev);
return mii_ethtool_sset(&pegasus->mii, ecmd);
}
static int pegasus_nway_reset(struct net_device *dev)
{
pegasus_t *pegasus = netdev_priv(dev);
return mii_nway_restart(&pegasus->mii);
}
static u32 pegasus_get_link(struct net_device *dev)
{
pegasus_t *pegasus = netdev_priv(dev);
return mii_link_ok(&pegasus->mii);
}
static u32 pegasus_get_msglevel(struct net_device *dev)
{
pegasus_t *pegasus = netdev_priv(dev);
return pegasus->msg_enable;
}
static void pegasus_set_msglevel(struct net_device *dev, u32 v)
{
pegasus_t *pegasus = netdev_priv(dev);
pegasus->msg_enable = v;
}
static struct ethtool_ops ops = {
.get_drvinfo = pegasus_get_drvinfo,
.get_settings = pegasus_get_settings,
.set_settings = pegasus_set_settings,
.nway_reset = pegasus_nway_reset,
.get_link = pegasus_get_link,
.get_msglevel = pegasus_get_msglevel,
.set_msglevel = pegasus_set_msglevel,
.get_wol = pegasus_get_wol,
.set_wol = pegasus_set_wol,
};
static int pegasus_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
{
__u16 *data = (__u16 *) & rq->ifr_ifru;
pegasus_t *pegasus = netdev_priv(net);
int res;
switch (cmd) {
case SIOCDEVPRIVATE:
data[0] = pegasus->phy;
case SIOCDEVPRIVATE + 1:
read_mii_word(pegasus, data[0], data[1] & 0x1f, &data[3]);
res = 0;
break;
case SIOCDEVPRIVATE + 2:
if (!capable(CAP_NET_ADMIN))
return -EPERM;
write_mii_word(pegasus, pegasus->phy, data[1] & 0x1f, data[2]);
res = 0;
break;
default:
res = -EOPNOTSUPP;
}
return res;
}
static void pegasus_set_multicast(struct net_device *net)
{
pegasus_t *pegasus = netdev_priv(net);
if (net->flags & IFF_PROMISC) {
pegasus->eth_regs[EthCtrl2] |= RX_PROMISCUOUS;
if (netif_msg_link(pegasus))
pr_info("%s: Promiscuous mode enabled.\n", net->name);
[PATCH] NETDEV: fix receiving multicast frames. Some USB ethernet drivers did not accept multicast frames appropriately. IPv6 did not work with those drivers without this patch. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-05-25 07:07:04 +00:00
} else if (net->mc_count ||
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
(net->flags & IFF_ALLMULTI)) {
pegasus->eth_regs[EthCtrl0] |= RX_MULTICAST;
pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
if (netif_msg_link(pegasus))
pr_info("%s: set allmulti\n", net->name);
} else {
pegasus->eth_regs[EthCtrl0] &= ~RX_MULTICAST;
pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
}
pegasus->flags |= ETH_REGS_CHANGE;
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
ctrl_callback(pegasus->ctrl_urb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static __u8 mii_phy_probe(pegasus_t * pegasus)
{
int i;
__u16 tmp;
for (i = 0; i < 32; i++) {
read_mii_word(pegasus, i, MII_BMSR, &tmp);
if (tmp == 0 || tmp == 0xffff || (tmp & BMSR_MEDIA) == 0)
continue;
else
return i;
}
return 0xff;
}
static inline void setup_pegasus_II(pegasus_t * pegasus)
{
__u8 data = 0xa5;
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
set_register(pegasus, Reg1d, 0);
set_register(pegasus, Reg7b, 1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
mdelay(100);
if ((pegasus->features & HAS_HOME_PNA) && mii_mode)
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
set_register(pegasus, Reg7b, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
else
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
set_register(pegasus, Reg7b, 2);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
set_register(pegasus, 0x83, data);
get_registers(pegasus, 0x83, 1, &data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (data == 0xa5) {
pegasus->chip = 0x8513;
} else {
pegasus->chip = 0;
}
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
set_register(pegasus, 0x80, 0xc0);
set_register(pegasus, 0x83, 0xff);
set_register(pegasus, 0x84, 0x01);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (pegasus->features & HAS_HOME_PNA && mii_mode)
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
set_register(pegasus, Reg81, 6);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
else
[PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:48:23 +00:00
set_register(pegasus, Reg81, 2);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static struct workqueue_struct *pegasus_workqueue = NULL;
#define CARRIER_CHECK_DELAY (2 * HZ)
WorkStruct: make allyesconfig Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:57:56 +00:00
static void check_carrier(struct work_struct *work)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
WorkStruct: make allyesconfig Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:57:56 +00:00
pegasus_t *pegasus = container_of(work, pegasus_t, carrier_check.work);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
set_carrier(pegasus->net);
if (!(pegasus->flags & PEGASUS_UNPLUG)) {
queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
CARRIER_CHECK_DELAY);
}
}
static int pegasus_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
struct net_device *net;
pegasus_t *pegasus;
int dev_index = id - pegasus_ids;
int res = -ENOMEM;
[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF() This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:59:30 +00:00
DECLARE_MAC_BUF(mac);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
usb_get_dev(dev);
net = alloc_etherdev(sizeof(struct pegasus));
if (!net) {
dev_err(&intf->dev, "can't allocate %s\n", "device");
goto out;
}
pegasus = netdev_priv(net);
pegasus->dev_index = dev_index;
init_waitqueue_head(&pegasus->ctrl_wait);
if (!alloc_urbs(pegasus)) {
dev_err(&intf->dev, "can't allocate %s\n", "urbs");
goto out1;
}
tasklet_init(&pegasus->rx_tl, rx_fixup, (unsigned long) pegasus);
WorkStruct: make allyesconfig Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:57:56 +00:00
INIT_DELAYED_WORK(&pegasus->carrier_check, check_carrier);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pegasus->intf = intf;
pegasus->usb = dev;
pegasus->net = net;
net->open = pegasus_open;
net->stop = pegasus_close;
net->watchdog_timeo = PEGASUS_TX_TIMEOUT;
net->tx_timeout = pegasus_tx_timeout;
net->do_ioctl = pegasus_ioctl;
net->hard_start_xmit = pegasus_start_xmit;
net->set_multicast_list = pegasus_set_multicast;
net->get_stats = pegasus_netdev_stats;
SET_ETHTOOL_OPS(net, &ops);
pegasus->mii.dev = net;
pegasus->mii.mdio_read = mdio_read;
pegasus->mii.mdio_write = mdio_write;
pegasus->mii.phy_id_mask = 0x1f;
pegasus->mii.reg_num_mask = 0x1f;
spin_lock_init(&pegasus->rx_pool_lock);
pegasus->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV
| NETIF_MSG_PROBE | NETIF_MSG_LINK);
pegasus->features = usb_dev_id[dev_index].private;
get_interrupt_interval(pegasus);
if (reset_mac(pegasus)) {
dev_err(&intf->dev, "can't reset MAC\n");
res = -EIO;
goto out2;
}
set_ethernet_addr(pegasus);
fill_skb_pool(pegasus);
if (pegasus->features & PEGASUS_II) {
dev_info(&intf->dev, "setup Pegasus II specific registers\n");
setup_pegasus_II(pegasus);
}
pegasus->phy = mii_phy_probe(pegasus);
if (pegasus->phy == 0xff) {
dev_warn(&intf->dev, "can't locate MII phy, using default\n");
pegasus->phy = 1;
}
pegasus->mii.phy_id = pegasus->phy;
usb_set_intfdata(intf, pegasus);
SET_NETDEV_DEV(net, &intf->dev);
pegasus_reset_wol(net);
res = register_netdev(net);
if (res)
goto out3;
queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
CARRIER_CHECK_DELAY);
[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF() This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 00:59:30 +00:00
dev_info(&intf->dev, "%s, %s, %s\n",
net->name,
usb_dev_id[dev_index].name,
print_mac(mac, net->dev_addr));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return 0;
out3:
usb_set_intfdata(intf, NULL);
free_skb_pool(pegasus);
out2:
free_all_urbs(pegasus);
out1:
free_netdev(net);
out:
usb_put_dev(dev);
return res;
}
static void pegasus_disconnect(struct usb_interface *intf)
{
struct pegasus *pegasus = usb_get_intfdata(intf);
usb_set_intfdata(intf, NULL);
if (!pegasus) {
dev_dbg(&intf->dev, "unregistering non-bound device?\n");
return;
}
pegasus->flags |= PEGASUS_UNPLUG;
cancel_delayed_work(&pegasus->carrier_check);
unregister_netdev(pegasus->net);
usb_put_dev(interface_to_usbdev(intf));
[PATCH] USB: fix pegasus driver Addresses some small bugs in the pegasus ethernet-over-USB driver. Specifically, malformed long packets from the adapter could cause a kernel panic; the interrupt interval calculation was inappropriate for high-speed devices; the return code from read_mii_word was tested incorrectly; and failure to unlink outstanding URBs before freeing them could lead to kernel panics when unloading the driver. Signed-off-by: Kevin Vigor <kevin@realmsys.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:49:24 +00:00
unlink_all_urbs(pegasus);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
free_all_urbs(pegasus);
free_skb_pool(pegasus);
[ETH]: Make eth_type_trans set skb->dev like the other *_type_trans One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:40:23 +00:00
if (pegasus->rx_skb != NULL) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
dev_kfree_skb(pegasus->rx_skb);
[ETH]: Make eth_type_trans set skb->dev like the other *_type_trans One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 00:40:23 +00:00
pegasus->rx_skb = NULL;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
free_netdev(pegasus->net);
}
[PATCH] usb suspend updates (interface suspend) This is the first of a few installments of PM API updates to match the recent switch to "pm_message_t". This installment primarily affects USB device drivers (for USB interfaces), and it changes the handful of drivers which currently implement suspend methods: - <linux/usb.h> and usbcore, signature change - Some drivers only changed the signature, net effect this just shuts up "sparse -Wbitwise": * hid-core * stir4200 - Two network drivers did that, and also grew slightly more featureful suspend code ... they now properly shut down their activities. (As should stir4200...) * pegasus * usbnet Note that the Wake-On-Lan (WOL) support in pegasus doesn't yet work; looks to me like it's missing a request to turn it on, vs just configuring it. The ASIX code in usbnet also has WOL hooks that are ready to use; untested. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/net/irda/stir4200.c ===================================================================
2005-04-19 00:39:22 +00:00
static int pegasus_suspend (struct usb_interface *intf, pm_message_t message)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct pegasus *pegasus = usb_get_intfdata(intf);
netif_device_detach (pegasus->net);
[PATCH] USB: pegasus fixes (logstorm, suspend) Teach "pegasus" to handle a few of the disconnect fault paths without hundreds of usless syslog messages. Handle the carrier check workqueue entry even if the driver has not been opened. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-01 21:02:45 +00:00
cancel_delayed_work(&pegasus->carrier_check);
[PATCH] usb suspend updates (interface suspend) This is the first of a few installments of PM API updates to match the recent switch to "pm_message_t". This installment primarily affects USB device drivers (for USB interfaces), and it changes the handful of drivers which currently implement suspend methods: - <linux/usb.h> and usbcore, signature change - Some drivers only changed the signature, net effect this just shuts up "sparse -Wbitwise": * hid-core * stir4200 - Two network drivers did that, and also grew slightly more featureful suspend code ... they now properly shut down their activities. (As should stir4200...) * pegasus * usbnet Note that the Wake-On-Lan (WOL) support in pegasus doesn't yet work; looks to me like it's missing a request to turn it on, vs just configuring it. The ASIX code in usbnet also has WOL hooks that are ready to use; untested. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/net/irda/stir4200.c ===================================================================
2005-04-19 00:39:22 +00:00
if (netif_running(pegasus->net)) {
usb_kill_urb(pegasus->rx_urb);
usb_kill_urb(pegasus->intr_urb);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return 0;
}
static int pegasus_resume (struct usb_interface *intf)
{
struct pegasus *pegasus = usb_get_intfdata(intf);
netif_device_attach (pegasus->net);
[PATCH] usb suspend updates (interface suspend) This is the first of a few installments of PM API updates to match the recent switch to "pm_message_t". This installment primarily affects USB device drivers (for USB interfaces), and it changes the handful of drivers which currently implement suspend methods: - <linux/usb.h> and usbcore, signature change - Some drivers only changed the signature, net effect this just shuts up "sparse -Wbitwise": * hid-core * stir4200 - Two network drivers did that, and also grew slightly more featureful suspend code ... they now properly shut down their activities. (As should stir4200...) * pegasus * usbnet Note that the Wake-On-Lan (WOL) support in pegasus doesn't yet work; looks to me like it's missing a request to turn it on, vs just configuring it. The ASIX code in usbnet also has WOL hooks that are ready to use; untested. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/net/irda/stir4200.c ===================================================================
2005-04-19 00:39:22 +00:00
if (netif_running(pegasus->net)) {
pegasus->rx_urb->status = 0;
pegasus->rx_urb->actual_length = 0;
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
read_bulk_callback(pegasus->rx_urb);
[PATCH] usb suspend updates (interface suspend) This is the first of a few installments of PM API updates to match the recent switch to "pm_message_t". This installment primarily affects USB device drivers (for USB interfaces), and it changes the handful of drivers which currently implement suspend methods: - <linux/usb.h> and usbcore, signature change - Some drivers only changed the signature, net effect this just shuts up "sparse -Wbitwise": * hid-core * stir4200 - Two network drivers did that, and also grew slightly more featureful suspend code ... they now properly shut down their activities. (As should stir4200...) * pegasus * usbnet Note that the Wake-On-Lan (WOL) support in pegasus doesn't yet work; looks to me like it's missing a request to turn it on, vs just configuring it. The ASIX code in usbnet also has WOL hooks that are ready to use; untested. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/net/irda/stir4200.c ===================================================================
2005-04-19 00:39:22 +00:00
pegasus->intr_urb->status = 0;
pegasus->intr_urb->actual_length = 0;
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
intr_callback(pegasus->intr_urb);
[PATCH] usb suspend updates (interface suspend) This is the first of a few installments of PM API updates to match the recent switch to "pm_message_t". This installment primarily affects USB device drivers (for USB interfaces), and it changes the handful of drivers which currently implement suspend methods: - <linux/usb.h> and usbcore, signature change - Some drivers only changed the signature, net effect this just shuts up "sparse -Wbitwise": * hid-core * stir4200 - Two network drivers did that, and also grew slightly more featureful suspend code ... they now properly shut down their activities. (As should stir4200...) * pegasus * usbnet Note that the Wake-On-Lan (WOL) support in pegasus doesn't yet work; looks to me like it's missing a request to turn it on, vs just configuring it. The ASIX code in usbnet also has WOL hooks that are ready to use; untested. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/net/irda/stir4200.c ===================================================================
2005-04-19 00:39:22 +00:00
}
[PATCH] USB: pegasus fixes (logstorm, suspend) Teach "pegasus" to handle a few of the disconnect fault paths without hundreds of usless syslog messages. Handle the carrier check workqueue entry even if the driver has not been opened. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-01 21:02:45 +00:00
queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
CARRIER_CHECK_DELAY);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return 0;
}
static struct usb_driver pegasus_driver = {
.name = driver_name,
.probe = pegasus_probe,
.disconnect = pegasus_disconnect,
.id_table = pegasus_ids,
.suspend = pegasus_suspend,
.resume = pegasus_resume,
};
[PATCH] USB: usb-net: new device ID passed through module parameter adds new module parameter "devid" that points to a string with format "device_name:vendor_id:device_id:flags". if provided at module load time, this string is being parsed and a new entry is created in usb_dev_id[] and pegasus_ids[] so the new device can later be recognized by the probe routine. this might be helpful for someone who don't know/wish to build new module/kernel, but want to use his new usb-to-eth device that is not yet listed in pegasus.h Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:55:18 +00:00
static void parse_id(char *id)
{
unsigned int vendor_id=0, device_id=0, flags=0, i=0;
char *token, *name=NULL;
if ((token = strsep(&id, ":")) != NULL)
name = token;
/* name now points to a null terminated string*/
if ((token = strsep(&id, ":")) != NULL)
vendor_id = simple_strtoul(token, NULL, 16);
if ((token = strsep(&id, ":")) != NULL)
device_id = simple_strtoul(token, NULL, 16);
flags = simple_strtoul(id, NULL, 16);
pr_info("%s: new device %s, vendor ID 0x%04x, device ID 0x%04x, flags: 0x%x\n",
driver_name, name, vendor_id, device_id, flags);
if (vendor_id > 0x10000 || vendor_id == 0)
return;
if (device_id > 0x10000 || device_id == 0)
return;
for (i=0; usb_dev_id[i].name; i++);
usb_dev_id[i].name = name;
usb_dev_id[i].vendor = vendor_id;
usb_dev_id[i].device = device_id;
usb_dev_id[i].private = flags;
pegasus_ids[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
pegasus_ids[i].idVendor = vendor_id;
pegasus_ids[i].idProduct = device_id;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int __init pegasus_init(void)
{
pr_info("%s: %s, " DRIVER_DESC "\n", driver_name, DRIVER_VERSION);
[PATCH] USB: usb-net: new device ID passed through module parameter adds new module parameter "devid" that points to a string with format "device_name:vendor_id:device_id:flags". if provided at module load time, this string is being parsed and a new entry is created in usb_dev_id[] and pegasus_ids[] so the new device can later be recognized by the probe routine. this might be helpful for someone who don't know/wish to build new module/kernel, but want to use his new usb-to-eth device that is not yet listed in pegasus.h Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-15 07:55:18 +00:00
if (devid)
parse_id(devid);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pegasus_workqueue = create_singlethread_workqueue("pegasus");
if (!pegasus_workqueue)
return -ENOMEM;
return usb_register(&pegasus_driver);
}
static void __exit pegasus_exit(void)
{
destroy_workqueue(pegasus_workqueue);
usb_deregister(&pegasus_driver);
}
module_init(pegasus_init);
module_exit(pegasus_exit);