linux-stable/fs/binfmt_elf_fdpic.c

1658 lines
44 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/* binfmt_elf_fdpic.c: FDPIC ELF binary format
*
* Copyright (C) 2003, 2004, 2006 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
* Derived from binfmt_elf.c
*/
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/stat.h>
#include <linux/sched.h>
#include <linux/sched/coredump.h>
#include <linux/sched/task_stack.h>
#include <linux/sched/cputime.h>
#include <linux/mm.h>
#include <linux/mman.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/binfmts.h>
#include <linux/string.h>
#include <linux/file.h>
#include <linux/fcntl.h>
#include <linux/slab.h>
#include <linux/pagemap.h>
#include <linux/security.h>
#include <linux/highmem.h>
#include <linux/highuid.h>
#include <linux/personality.h>
#include <linux/ptrace.h>
#include <linux/init.h>
#include <linux/elf.h>
#include <linux/elf-fdpic.h>
#include <linux/elfcore.h>
#include <linux/coredump.h>
#include <linux/dax.h>
#include <linux/regset.h>
#include <linux/uaccess.h>
#include <asm/param.h>
typedef char *elf_caddr_t;
#if 0
#define kdebug(fmt, ...) printk("FDPIC "fmt"\n" ,##__VA_ARGS__ )
#else
#define kdebug(fmt, ...) do {} while(0)
#endif
#if 0
#define kdcore(fmt, ...) printk("FDPIC "fmt"\n" ,##__VA_ARGS__ )
#else
#define kdcore(fmt, ...) do {} while(0)
#endif
MODULE_LICENSE("GPL");
static int load_elf_fdpic_binary(struct linux_binprm *);
static int elf_fdpic_fetch_phdrs(struct elf_fdpic_params *, struct file *);
static int elf_fdpic_map_file(struct elf_fdpic_params *, struct file *,
struct mm_struct *, const char *);
static int create_elf_fdpic_tables(struct linux_binprm *, struct mm_struct *,
struct elf_fdpic_params *,
struct elf_fdpic_params *);
#ifndef CONFIG_MMU
static int elf_fdpic_map_file_constdisp_on_uclinux(struct elf_fdpic_params *,
struct file *,
struct mm_struct *);
#endif
static int elf_fdpic_map_file_by_direct_mmap(struct elf_fdpic_params *,
struct file *, struct mm_struct *);
#ifdef CONFIG_ELF_CORE
static int elf_fdpic_core_dump(struct coredump_params *cprm);
#endif
static struct linux_binfmt elf_fdpic_format = {
.module = THIS_MODULE,
.load_binary = load_elf_fdpic_binary,
#ifdef CONFIG_ELF_CORE
.core_dump = elf_fdpic_core_dump,
.min_coredump = ELF_EXEC_PAGESIZE,
#endif
};
static int __init init_elf_fdpic_binfmt(void)
{
register_binfmt(&elf_fdpic_format);
return 0;
}
static void __exit exit_elf_fdpic_binfmt(void)
{
unregister_binfmt(&elf_fdpic_format);
}
core_initcall(init_elf_fdpic_binfmt);
module_exit(exit_elf_fdpic_binfmt);
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 22:59:01 +00:00
static int is_elf(struct elfhdr *hdr, struct file *file)
{
if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0)
return 0;
if (hdr->e_type != ET_EXEC && hdr->e_type != ET_DYN)
return 0;
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 22:59:01 +00:00
if (!elf_check_arch(hdr))
return 0;
if (!file->f_op->mmap)
return 0;
return 1;
}
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 22:59:01 +00:00
#ifndef elf_check_fdpic
#define elf_check_fdpic(x) 0
#endif
#ifndef elf_check_const_displacement
#define elf_check_const_displacement(x) 0
#endif
static int is_constdisp(struct elfhdr *hdr)
{
if (!elf_check_fdpic(hdr))
return 1;
if (elf_check_const_displacement(hdr))
return 1;
return 0;
}
/*****************************************************************************/
/*
* read the program headers table into memory
*/
static int elf_fdpic_fetch_phdrs(struct elf_fdpic_params *params,
struct file *file)
{
struct elf_phdr *phdr;
unsigned long size;
int retval, loop;
loff_t pos = params->hdr.e_phoff;
if (params->hdr.e_phentsize != sizeof(struct elf_phdr))
return -ENOMEM;
if (params->hdr.e_phnum > 65536U / sizeof(struct elf_phdr))
return -ENOMEM;
size = params->hdr.e_phnum * sizeof(struct elf_phdr);
params->phdrs = kmalloc(size, GFP_KERNEL);
if (!params->phdrs)
return -ENOMEM;
retval = kernel_read(file, params->phdrs, size, &pos);
if (unlikely(retval != size))
return retval < 0 ? retval : -ENOEXEC;
/* determine stack size for this binary */
phdr = params->phdrs;
for (loop = 0; loop < params->hdr.e_phnum; loop++, phdr++) {
if (phdr->p_type != PT_GNU_STACK)
continue;
if (phdr->p_flags & PF_X)
params->flags |= ELF_FDPIC_FLAG_EXEC_STACK;
else
params->flags |= ELF_FDPIC_FLAG_NOEXEC_STACK;
params->stack_size = phdr->p_memsz;
break;
}
return 0;
}
/*****************************************************************************/
/*
* load an fdpic binary into various bits of memory
*/
static int load_elf_fdpic_binary(struct linux_binprm *bprm)
{
struct elf_fdpic_params exec_params, interp_params;
struct pt_regs *regs = current_pt_regs();
struct elf_phdr *phdr;
unsigned long stack_size, entryaddr;
#ifdef ELF_FDPIC_PLAT_INIT
unsigned long dynaddr;
#endif
#ifndef CONFIG_MMU
unsigned long stack_prot;
#endif
struct file *interpreter = NULL; /* to shut gcc up */
char *interpreter_name = NULL;
int executable_stack;
int retval, i;
loff_t pos;
[PATCH] FDPIC: fix the /proc/pid/stat representation of executable boundaries Fix the /proc/pid/stat representation of executable boundaries. It should show the bounds of the executable, but instead shows the bounds of the loader. Before the patch is applied, the bug can be seen by examining, say, inetd: # ps | grep inetd 610 root 0 S /usr/sbin/inetd -i # cat /proc/610/maps c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3180000-c31dede4 r-xs 00000000 00:0b 14582179 /lib/libuClibc-0.9.28.so c328c000-c328ea00 rw-p 00008000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3290000-c329b6c0 rw-p 00000000 00:00 0 c32a0000-c32c0000 rwxp 00000000 00:00 0 c32d4000-c32d8000 rw-p 00000000 00:00 0 c3394000-c3398000 rw-p 00000000 00:00 0 c3458000-c345f464 r-xs 00000000 00:0b 16384612 /usr/sbin/inetd c3470000-c34748f8 rw-p 00004000 00:0b 16384612 /usr/sbin/inetd c34cc000-c34d0000 rw-p 00000000 00:00 0 c34d4000-c34d8000 rw-p 00000000 00:00 0 c34d8000-c34dc000 rw-p 00000000 00:00 0 # cat /proc/610/stat 610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 8 0 0 19 0 1 0 94392000718 950272 0 4294967295 3233480704 3233523592 3274440352 3274439976 3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0 The code boundaries are 3233480704 to 3233523592, which are: (gdb) p/x 3233480704 $1 = 0xc0bb0000 (gdb) p/x 3233523592 $2 = 0xc0bba788 Which corresponds to this line in the maps file: c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so Which is wrong. After the patch is applied, the maps file is pretty much identical (there's some minor shuffling of the location of some of the anonymous VMAs), but the stat file is now: # cat /proc/610/stat 610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 7 0 0 18 0 1 0 94392000722 950272 0 4294967295 3276111872 3276141668 3274440352 3274439976 3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0 The code boundaries are then 3276111872 to 3276141668, which are: (gdb) p/x 3276111872 $1 = 0xc3458000 (gdb) p/x 3276141668 $2 = 0xc345f464 And these correspond to this line in the maps file instead: c3458000-c345f464 r-xs 00000000 00:0b 16384612 /usr/sbin/inetd Which is now correct. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-23 07:10:00 +00:00
kdebug("____ LOAD %d ____", current->pid);
memset(&exec_params, 0, sizeof(exec_params));
memset(&interp_params, 0, sizeof(interp_params));
exec_params.hdr = *(struct elfhdr *) bprm->buf;
exec_params.flags = ELF_FDPIC_FLAG_PRESENT | ELF_FDPIC_FLAG_EXECUTABLE;
/* check that this is a binary we know how to deal with */
retval = -ENOEXEC;
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 22:59:01 +00:00
if (!is_elf(&exec_params.hdr, bprm->file))
goto error;
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 22:59:01 +00:00
if (!elf_check_fdpic(&exec_params.hdr)) {
#ifdef CONFIG_MMU
/* binfmt_elf handles non-fdpic elf except on nommu */
goto error;
#else
/* nommu can only load ET_DYN (PIE) ELF */
if (exec_params.hdr.e_type != ET_DYN)
goto error;
#endif
}
/* read the program header table */
retval = elf_fdpic_fetch_phdrs(&exec_params, bprm->file);
if (retval < 0)
goto error;
/* scan for a program header that specifies an interpreter */
phdr = exec_params.phdrs;
for (i = 0; i < exec_params.hdr.e_phnum; i++, phdr++) {
switch (phdr->p_type) {
case PT_INTERP:
retval = -ENOMEM;
if (phdr->p_filesz > PATH_MAX)
goto error;
retval = -ENOENT;
if (phdr->p_filesz < 2)
goto error;
/* read the name of the interpreter into memory */
interpreter_name = kmalloc(phdr->p_filesz, GFP_KERNEL);
if (!interpreter_name)
goto error;
pos = phdr->p_offset;
retval = kernel_read(bprm->file, interpreter_name,
phdr->p_filesz, &pos);
if (unlikely(retval != phdr->p_filesz)) {
if (retval >= 0)
retval = -ENOEXEC;
goto error;
}
retval = -ENOENT;
if (interpreter_name[phdr->p_filesz - 1] != '\0')
goto error;
kdebug("Using ELF interpreter %s", interpreter_name);
/* replace the program with the interpreter */
interpreter = open_exec(interpreter_name);
retval = PTR_ERR(interpreter);
if (IS_ERR(interpreter)) {
interpreter = NULL;
goto error;
}
/*
* If the binary is not readable then enforce
* mm->dumpable = 0 regardless of the interpreter's
* permissions.
*/
would_dump(bprm, interpreter);
pos = 0;
retval = kernel_read(interpreter, bprm->buf,
BINPRM_BUF_SIZE, &pos);
if (unlikely(retval != BINPRM_BUF_SIZE)) {
if (retval >= 0)
retval = -ENOEXEC;
goto error;
}
interp_params.hdr = *((struct elfhdr *) bprm->buf);
break;
case PT_LOAD:
#ifdef CONFIG_MMU
if (exec_params.load_addr == 0)
exec_params.load_addr = phdr->p_vaddr;
#endif
break;
}
}
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 22:59:01 +00:00
if (is_constdisp(&exec_params.hdr))
exec_params.flags |= ELF_FDPIC_FLAG_CONSTDISP;
/* perform insanity checks on the interpreter */
if (interpreter_name) {
retval = -ELIBBAD;
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 22:59:01 +00:00
if (!is_elf(&interp_params.hdr, interpreter))
goto error;
interp_params.flags = ELF_FDPIC_FLAG_PRESENT;
/* read the interpreter's program header table */
retval = elf_fdpic_fetch_phdrs(&interp_params, interpreter);
if (retval < 0)
goto error;
}
stack_size = exec_params.stack_size;
if (exec_params.flags & ELF_FDPIC_FLAG_EXEC_STACK)
executable_stack = EXSTACK_ENABLE_X;
else if (exec_params.flags & ELF_FDPIC_FLAG_NOEXEC_STACK)
executable_stack = EXSTACK_DISABLE_X;
else
executable_stack = EXSTACK_DEFAULT;
if (stack_size == 0 && interp_params.flags & ELF_FDPIC_FLAG_PRESENT) {
stack_size = interp_params.stack_size;
if (interp_params.flags & ELF_FDPIC_FLAG_EXEC_STACK)
executable_stack = EXSTACK_ENABLE_X;
else if (interp_params.flags & ELF_FDPIC_FLAG_NOEXEC_STACK)
executable_stack = EXSTACK_DISABLE_X;
else
executable_stack = EXSTACK_DEFAULT;
}
retval = -ENOEXEC;
if (stack_size == 0)
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 22:59:01 +00:00
stack_size = 131072UL; /* same as exec.c's default commit */
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 22:59:01 +00:00
if (is_constdisp(&interp_params.hdr))
interp_params.flags |= ELF_FDPIC_FLAG_CONSTDISP;
/* flush all traces of the currently running executable */
retval = begin_new_exec(bprm);
if (retval)
goto error;
/* there's now no turning back... the old userspace image is dead,
* defunct, deceased, etc.
*/
fs: binfmt_elf_efpic: fix personality for ELF-FDPIC The elf-fdpic loader hard sets the process personality to either PER_LINUX_FDPIC for true elf-fdpic binaries or to PER_LINUX for normal ELF binaries (in this case they would be constant displacement compiled with -pie for example). The problem with that is that it will lose any other bits that may be in the ELF header personality (such as the "bug emulation" bits). On the ARM architecture the ADDR_LIMIT_32BIT flag is used to signify a normal 32bit binary - as opposed to a legacy 26bit address binary. This matters since start_thread() will set the ARM CPSR register as required based on this flag. If the elf-fdpic loader loses this bit the process will be mis-configured and crash out pretty quickly. Modify elf-fdpic loader personality setting so that it preserves the upper three bytes by using the SET_PERSONALITY macro to set it. This macro in the generic case sets PER_LINUX and preserves the upper bytes. Architectures can override this for their specific use case, and ARM does exactly this. The problem shows up quite easily running under qemu using the ARM architecture, but not necessarily on all types of real ARM hardware. If the underlying ARM processor does not support the legacy 26-bit addressing mode then everything will work as expected. Link: https://lkml.kernel.org/r/20230907011808.2985083-1-gerg@kernel.org Fixes: 1bde925d23547 ("fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries") Signed-off-by: Greg Ungerer <gerg@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Ungerer <gerg@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-07 01:18:08 +00:00
SET_PERSONALITY(exec_params.hdr);
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 22:59:01 +00:00
if (elf_check_fdpic(&exec_params.hdr))
fs: binfmt_elf_efpic: fix personality for ELF-FDPIC The elf-fdpic loader hard sets the process personality to either PER_LINUX_FDPIC for true elf-fdpic binaries or to PER_LINUX for normal ELF binaries (in this case they would be constant displacement compiled with -pie for example). The problem with that is that it will lose any other bits that may be in the ELF header personality (such as the "bug emulation" bits). On the ARM architecture the ADDR_LIMIT_32BIT flag is used to signify a normal 32bit binary - as opposed to a legacy 26bit address binary. This matters since start_thread() will set the ARM CPSR register as required based on this flag. If the elf-fdpic loader loses this bit the process will be mis-configured and crash out pretty quickly. Modify elf-fdpic loader personality setting so that it preserves the upper three bytes by using the SET_PERSONALITY macro to set it. This macro in the generic case sets PER_LINUX and preserves the upper bytes. Architectures can override this for their specific use case, and ARM does exactly this. The problem shows up quite easily running under qemu using the ARM architecture, but not necessarily on all types of real ARM hardware. If the underlying ARM processor does not support the legacy 26-bit addressing mode then everything will work as expected. Link: https://lkml.kernel.org/r/20230907011808.2985083-1-gerg@kernel.org Fixes: 1bde925d23547 ("fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries") Signed-off-by: Greg Ungerer <gerg@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Ungerer <gerg@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-07 01:18:08 +00:00
current->personality |= PER_LINUX_FDPIC;
if (elf_read_implies_exec(&exec_params.hdr, executable_stack))
current->personality |= READ_IMPLIES_EXEC;
setup_new_exec(bprm);
set_binfmt(&elf_fdpic_format);
current->mm->start_code = 0;
current->mm->end_code = 0;
current->mm->start_stack = 0;
current->mm->start_data = 0;
current->mm->end_data = 0;
current->mm->context.exec_fdpic_loadmap = 0;
current->mm->context.interp_fdpic_loadmap = 0;
#ifdef CONFIG_MMU
elf_fdpic_arch_lay_out_mm(&exec_params,
&interp_params,
&current->mm->start_stack,
&current->mm->start_brk);
retval = setup_arg_pages(bprm, current->mm->start_stack,
executable_stack);
if (retval < 0)
goto error;
#ifdef ARCH_HAS_SETUP_ADDITIONAL_PAGES
retval = arch_setup_additional_pages(bprm, !!interpreter_name);
if (retval < 0)
goto error;
#endif
#endif
/* load the executable and interpreter into memory */
retval = elf_fdpic_map_file(&exec_params, bprm->file, current->mm,
"executable");
if (retval < 0)
goto error;
if (interpreter_name) {
retval = elf_fdpic_map_file(&interp_params, interpreter,
current->mm, "interpreter");
if (retval < 0) {
printk(KERN_ERR "Unable to load interpreter\n");
goto error;
}
allow_write_access(interpreter);
fput(interpreter);
interpreter = NULL;
}
#ifdef CONFIG_MMU
if (!current->mm->start_brk)
current->mm->start_brk = current->mm->end_data;
current->mm->brk = current->mm->start_brk =
PAGE_ALIGN(current->mm->start_brk);
#else
/* create a stack area and zero-size brk area */
stack_size = (stack_size + PAGE_SIZE - 1) & PAGE_MASK;
if (stack_size < PAGE_SIZE * 2)
stack_size = PAGE_SIZE * 2;
stack_prot = PROT_READ | PROT_WRITE;
if (executable_stack == EXSTACK_ENABLE_X ||
(executable_stack == EXSTACK_DEFAULT && VM_STACK_FLAGS & VM_EXEC))
stack_prot |= PROT_EXEC;
current->mm->start_brk = vm_mmap(NULL, 0, stack_size, stack_prot,
MAP_PRIVATE | MAP_ANONYMOUS |
MAP_UNINITIALIZED | MAP_GROWSDOWN,
0);
if (IS_ERR_VALUE(current->mm->start_brk)) {
retval = current->mm->start_brk;
current->mm->start_brk = 0;
goto error;
}
current->mm->brk = current->mm->start_brk;
current->mm->context.end_brk = current->mm->start_brk;
current->mm->start_stack = current->mm->start_brk + stack_size;
#endif
retval = create_elf_fdpic_tables(bprm, current->mm, &exec_params,
&interp_params);
if (retval < 0)
goto error;
kdebug("- start_code %lx", current->mm->start_code);
kdebug("- end_code %lx", current->mm->end_code);
kdebug("- start_data %lx", current->mm->start_data);
kdebug("- end_data %lx", current->mm->end_data);
kdebug("- start_brk %lx", current->mm->start_brk);
kdebug("- brk %lx", current->mm->brk);
kdebug("- start_stack %lx", current->mm->start_stack);
#ifdef ELF_FDPIC_PLAT_INIT
/*
* The ABI may specify that certain registers be set up in special
* ways (on i386 %edx is the address of a DT_FINI function, for
* example. This macro performs whatever initialization to
* the regs structure is required.
*/
dynaddr = interp_params.dynamic_addr ?: exec_params.dynamic_addr;
ELF_FDPIC_PLAT_INIT(regs, exec_params.map_addr, interp_params.map_addr,
dynaddr);
#endif
finalize_exec(bprm);
/* everything is now ready... get the userspace context ready to roll */
entryaddr = interp_params.entry_addr ?: exec_params.entry_addr;
start_thread(regs, entryaddr, current->mm->start_stack);
retval = 0;
error:
if (interpreter) {
allow_write_access(interpreter);
fput(interpreter);
}
kfree(interpreter_name);
kfree(exec_params.phdrs);
kfree(exec_params.loadmap);
kfree(interp_params.phdrs);
kfree(interp_params.loadmap);
return retval;
}
/*****************************************************************************/
#ifndef ELF_BASE_PLATFORM
/*
* AT_BASE_PLATFORM indicates the "real" hardware/microarchitecture.
* If the arch defines ELF_BASE_PLATFORM (in asm/elf.h), the value
* will be copied to the user stack in the same manner as AT_PLATFORM.
*/
#define ELF_BASE_PLATFORM NULL
#endif
/*
* present useful information to the program by shovelling it onto the new
* process's stack
*/
static int create_elf_fdpic_tables(struct linux_binprm *bprm,
struct mm_struct *mm,
struct elf_fdpic_params *exec_params,
struct elf_fdpic_params *interp_params)
{
const struct cred *cred = current_cred();
unsigned long sp, csp, nitems;
elf_caddr_t __user *argv, *envp;
size_t platform_len = 0, len;
char *k_platform, *k_base_platform;
char __user *u_platform, *u_base_platform, *p;
int loop;
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 04:34:45 +00:00
int nr; /* reset for each csp adjustment */
unsigned long flags = 0;
#ifdef CONFIG_MMU
/* In some cases (e.g. Hyper-Threading), we want to avoid L1 evictions
* by the processes running on the same package. One thing we can do is
* to shuffle the initial stack for them, so we give the architecture
* an opportunity to do so here.
*/
sp = arch_align_stack(bprm->p);
#else
sp = mm->start_stack;
/* stack the program arguments and environment */
if (transfer_args_to_stack(bprm, &sp) < 0)
return -EFAULT;
sp &= ~15;
#endif
/*
* If this architecture has a platform capability string, copy it
* to userspace. In some cases (Sparc), this info is impossible
* for userspace to get any other way, in others (i386) it is
* merely difficult.
*/
k_platform = ELF_PLATFORM;
u_platform = NULL;
if (k_platform) {
platform_len = strlen(k_platform) + 1;
sp -= platform_len;
u_platform = (char __user *) sp;
if (copy_to_user(u_platform, k_platform, platform_len) != 0)
return -EFAULT;
}
/*
* If this architecture has a "base" platform capability
* string, copy it to userspace.
*/
k_base_platform = ELF_BASE_PLATFORM;
u_base_platform = NULL;
if (k_base_platform) {
platform_len = strlen(k_base_platform) + 1;
sp -= platform_len;
u_base_platform = (char __user *) sp;
if (copy_to_user(u_base_platform, k_base_platform, platform_len) != 0)
return -EFAULT;
}
sp &= ~7UL;
/* stack the load map(s) */
len = sizeof(struct elf_fdpic_loadmap);
len += sizeof(struct elf_fdpic_loadseg) * exec_params->loadmap->nsegs;
sp = (sp - len) & ~7UL;
exec_params->map_addr = sp;
if (copy_to_user((void __user *) sp, exec_params->loadmap, len) != 0)
return -EFAULT;
current->mm->context.exec_fdpic_loadmap = (unsigned long) sp;
if (interp_params->loadmap) {
len = sizeof(struct elf_fdpic_loadmap);
len += sizeof(struct elf_fdpic_loadseg) *
interp_params->loadmap->nsegs;
sp = (sp - len) & ~7UL;
interp_params->map_addr = sp;
if (copy_to_user((void __user *) sp, interp_params->loadmap,
len) != 0)
return -EFAULT;
current->mm->context.interp_fdpic_loadmap = (unsigned long) sp;
}
/* force 16 byte _final_ alignment here for generality */
#define DLINFO_ITEMS 15
nitems = 1 + DLINFO_ITEMS + (k_platform ? 1 : 0) +
(k_base_platform ? 1 : 0) + AT_VECTOR_SIZE_ARCH;
if (bprm->have_execfd)
nitems++;
csp = sp;
sp -= nitems * 2 * sizeof(unsigned long);
sp -= (bprm->envc + 1) * sizeof(char *); /* envv[] */
sp -= (bprm->argc + 1) * sizeof(char *); /* argv[] */
sp -= 1 * sizeof(unsigned long); /* argc */
csp -= sp & 15UL;
sp -= sp & 15UL;
/* put the ELF interpreter info on the stack */
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 04:34:45 +00:00
#define NEW_AUX_ENT(id, val) \
do { \
struct { unsigned long _id, _val; } __user *ent, v; \
\
ent = (void __user *) csp; \
v._id = (id); \
v._val = (val); \
if (copy_to_user(ent + nr, &v, sizeof(v))) \
return -EFAULT; \
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 04:34:45 +00:00
nr++; \
} while (0)
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 04:34:45 +00:00
nr = 0;
csp -= 2 * sizeof(unsigned long);
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 04:34:45 +00:00
NEW_AUX_ENT(AT_NULL, 0);
if (k_platform) {
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 04:34:45 +00:00
nr = 0;
csp -= 2 * sizeof(unsigned long);
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 04:34:45 +00:00
NEW_AUX_ENT(AT_PLATFORM,
(elf_addr_t) (unsigned long) u_platform);
}
if (k_base_platform) {
nr = 0;
csp -= 2 * sizeof(unsigned long);
NEW_AUX_ENT(AT_BASE_PLATFORM,
(elf_addr_t) (unsigned long) u_base_platform);
}
if (bprm->have_execfd) {
nr = 0;
csp -= 2 * sizeof(unsigned long);
NEW_AUX_ENT(AT_EXECFD, bprm->execfd);
}
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 04:34:45 +00:00
nr = 0;
csp -= DLINFO_ITEMS * 2 * sizeof(unsigned long);
NEW_AUX_ENT(AT_HWCAP, ELF_HWCAP);
#ifdef ELF_HWCAP2
NEW_AUX_ENT(AT_HWCAP2, ELF_HWCAP2);
#endif
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 04:34:45 +00:00
NEW_AUX_ENT(AT_PAGESZ, PAGE_SIZE);
NEW_AUX_ENT(AT_CLKTCK, CLOCKS_PER_SEC);
NEW_AUX_ENT(AT_PHDR, exec_params->ph_addr);
NEW_AUX_ENT(AT_PHENT, sizeof(struct elf_phdr));
NEW_AUX_ENT(AT_PHNUM, exec_params->hdr.e_phnum);
NEW_AUX_ENT(AT_BASE, interp_params->elfhdr_addr);
if (bprm->interp_flags & BINPRM_FLAGS_PRESERVE_ARGV0)
flags |= AT_FLAGS_PRESERVE_ARGV0;
NEW_AUX_ENT(AT_FLAGS, flags);
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 04:34:45 +00:00
NEW_AUX_ENT(AT_ENTRY, exec_params->entry_addr);
NEW_AUX_ENT(AT_UID, (elf_addr_t) from_kuid_munged(cred->user_ns, cred->uid));
NEW_AUX_ENT(AT_EUID, (elf_addr_t) from_kuid_munged(cred->user_ns, cred->euid));
NEW_AUX_ENT(AT_GID, (elf_addr_t) from_kgid_munged(cred->user_ns, cred->gid));
NEW_AUX_ENT(AT_EGID, (elf_addr_t) from_kgid_munged(cred->user_ns, cred->egid));
binfmt: Introduce secureexec flag The bprm_secureexec hook can be moved earlier. Right now, it is called during create_elf_tables(), via load_binary(), via search_binary_handler(), via exec_binprm(). Nearly all (see exception below) state used by bprm_secureexec is created during the bprm_set_creds hook, called from prepare_binprm(). For all LSMs (except commoncaps described next), only the first execution of bprm_set_creds takes any effect (they all check bprm->called_set_creds which prepare_binprm() sets after the first call to the bprm_set_creds hook). However, all these LSMs also only do anything with bprm_secureexec when they detected a secure state during their first run of bprm_set_creds. Therefore, it is functionally identical to move the detection into bprm_set_creds, since the results from secureexec here only need to be based on the first call to the LSM's bprm_set_creds hook. The single exception is that the commoncaps secureexec hook also examines euid/uid and egid/gid differences which are controlled by bprm_fill_uid(), via prepare_binprm(), which can be called multiple times (e.g. binfmt_script, binfmt_misc), and may clear the euid/egid for the final load (i.e. the script interpreter). However, while commoncaps specifically ignores bprm->cred_prepared, and runs its bprm_set_creds hook each time prepare_binprm() may get called, it needs to base the secureexec decision on the final call to bprm_set_creds. As a result, it will need special handling. To begin this refactoring, this adds the secureexec flag to the bprm struct, and calls the secureexec hook during setup_new_exec(). This is safe since all the cred work is finished (and past the point of no return). This explicit call will be removed in later patches once the hook has been removed. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: John Johansen <john.johansen@canonical.com> Acked-by: Serge Hallyn <serge@hallyn.com> Reviewed-by: James Morris <james.l.morris@oracle.com>
2017-07-18 22:25:22 +00:00
NEW_AUX_ENT(AT_SECURE, bprm->secureexec);
NEW_AUX_ENT(AT_EXECFN, bprm->exec);
#ifdef ARCH_DLINFO
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 04:34:45 +00:00
nr = 0;
csp -= AT_VECTOR_SIZE_ARCH * 2 * sizeof(unsigned long);
/* ARCH_DLINFO must come last so platform specific code can enforce
* special alignment requirements on the AUXV if necessary (eg. PPC).
*/
ARCH_DLINFO;
#endif
#undef NEW_AUX_ENT
/* allocate room for argv[] and envv[] */
csp -= (bprm->envc + 1) * sizeof(elf_caddr_t);
envp = (elf_caddr_t __user *) csp;
csp -= (bprm->argc + 1) * sizeof(elf_caddr_t);
argv = (elf_caddr_t __user *) csp;
/* stack argc */
csp -= sizeof(unsigned long);
if (put_user(bprm->argc, (unsigned long __user *) csp))
return -EFAULT;
BUG_ON(csp != sp);
/* fill in the argv[] array */
#ifdef CONFIG_MMU
current->mm->arg_start = bprm->p;
#else
current->mm->arg_start = current->mm->start_stack -
(MAX_ARG_PAGES * PAGE_SIZE - bprm->p);
#endif
p = (char __user *) current->mm->arg_start;
for (loop = bprm->argc; loop > 0; loop--) {
if (put_user((elf_caddr_t) p, argv++))
return -EFAULT;
len = strnlen_user(p, MAX_ARG_STRLEN);
if (!len || len > MAX_ARG_STRLEN)
return -EINVAL;
p += len;
}
if (put_user(NULL, argv))
return -EFAULT;
current->mm->arg_end = (unsigned long) p;
/* fill in the envv[] array */
current->mm->env_start = (unsigned long) p;
for (loop = bprm->envc; loop > 0; loop--) {
if (put_user((elf_caddr_t)(unsigned long) p, envp++))
return -EFAULT;
len = strnlen_user(p, MAX_ARG_STRLEN);
if (!len || len > MAX_ARG_STRLEN)
return -EINVAL;
p += len;
}
if (put_user(NULL, envp))
return -EFAULT;
current->mm->env_end = (unsigned long) p;
mm->start_stack = (unsigned long) sp;
return 0;
}
/*****************************************************************************/
/*
* load the appropriate binary image (executable or interpreter) into memory
* - we assume no MMU is available
* - if no other PIC bits are set in params->hdr->e_flags
* - we assume that the LOADable segments in the binary are independently relocatable
* - we assume R/O executable segments are shareable
* - else
* - we assume the loadable parts of the image to require fixed displacement
* - the image is not shareable
*/
static int elf_fdpic_map_file(struct elf_fdpic_params *params,
struct file *file,
struct mm_struct *mm,
const char *what)
{
struct elf_fdpic_loadmap *loadmap;
#ifdef CONFIG_MMU
struct elf_fdpic_loadseg *mseg;
unsigned long load_addr;
#endif
struct elf_fdpic_loadseg *seg;
struct elf_phdr *phdr;
unsigned nloads, tmp;
unsigned long stop;
int loop, ret;
/* allocate a load map table */
nloads = 0;
for (loop = 0; loop < params->hdr.e_phnum; loop++)
if (params->phdrs[loop].p_type == PT_LOAD)
nloads++;
if (nloads == 0)
return -ELIBBAD;
loadmap = kzalloc(struct_size(loadmap, segs, nloads), GFP_KERNEL);
if (!loadmap)
return -ENOMEM;
params->loadmap = loadmap;
loadmap->version = ELF_FDPIC_LOADMAP_VERSION;
loadmap->nsegs = nloads;
/* map the requested LOADs into the memory space */
switch (params->flags & ELF_FDPIC_FLAG_ARRANGEMENT) {
case ELF_FDPIC_FLAG_CONSTDISP:
case ELF_FDPIC_FLAG_CONTIGUOUS:
#ifndef CONFIG_MMU
ret = elf_fdpic_map_file_constdisp_on_uclinux(params, file, mm);
if (ret < 0)
return ret;
break;
#endif
default:
ret = elf_fdpic_map_file_by_direct_mmap(params, file, mm);
if (ret < 0)
return ret;
break;
}
/* map the entry point */
if (params->hdr.e_entry) {
seg = loadmap->segs;
for (loop = loadmap->nsegs; loop > 0; loop--, seg++) {
if (params->hdr.e_entry >= seg->p_vaddr &&
params->hdr.e_entry < seg->p_vaddr + seg->p_memsz) {
params->entry_addr =
(params->hdr.e_entry - seg->p_vaddr) +
seg->addr;
break;
}
}
}
/* determine where the program header table has wound up if mapped */
stop = params->hdr.e_phoff;
stop += params->hdr.e_phnum * sizeof (struct elf_phdr);
phdr = params->phdrs;
for (loop = 0; loop < params->hdr.e_phnum; loop++, phdr++) {
if (phdr->p_type != PT_LOAD)
continue;
if (phdr->p_offset > params->hdr.e_phoff ||
phdr->p_offset + phdr->p_filesz < stop)
continue;
seg = loadmap->segs;
for (loop = loadmap->nsegs; loop > 0; loop--, seg++) {
if (phdr->p_vaddr >= seg->p_vaddr &&
phdr->p_vaddr + phdr->p_filesz <=
seg->p_vaddr + seg->p_memsz) {
params->ph_addr =
(phdr->p_vaddr - seg->p_vaddr) +
seg->addr +
params->hdr.e_phoff - phdr->p_offset;
break;
}
}
break;
}
/* determine where the dynamic section has wound up if there is one */
phdr = params->phdrs;
for (loop = 0; loop < params->hdr.e_phnum; loop++, phdr++) {
if (phdr->p_type != PT_DYNAMIC)
continue;
seg = loadmap->segs;
for (loop = loadmap->nsegs; loop > 0; loop--, seg++) {
if (phdr->p_vaddr >= seg->p_vaddr &&
phdr->p_vaddr + phdr->p_memsz <=
seg->p_vaddr + seg->p_memsz) {
Elf_Dyn __user *dyn;
Elf_Sword d_tag;
params->dynamic_addr =
(phdr->p_vaddr - seg->p_vaddr) +
seg->addr;
/* check the dynamic section contains at least
* one item, and that the last item is a NULL
* entry */
if (phdr->p_memsz == 0 ||
phdr->p_memsz % sizeof(Elf_Dyn) != 0)
goto dynamic_error;
tmp = phdr->p_memsz / sizeof(Elf_Dyn);
dyn = (Elf_Dyn __user *)params->dynamic_addr;
if (get_user(d_tag, &dyn[tmp - 1].d_tag) ||
d_tag != 0)
goto dynamic_error;
break;
}
}
break;
}
/* now elide adjacent segments in the load map on MMU linux
* - on uClinux the holes between may actually be filled with system
* stuff or stuff from other processes
*/
#ifdef CONFIG_MMU
nloads = loadmap->nsegs;
mseg = loadmap->segs;
seg = mseg + 1;
for (loop = 1; loop < nloads; loop++) {
/* see if we have a candidate for merging */
if (seg->p_vaddr - mseg->p_vaddr == seg->addr - mseg->addr) {
load_addr = PAGE_ALIGN(mseg->addr + mseg->p_memsz);
if (load_addr == (seg->addr & PAGE_MASK)) {
mseg->p_memsz +=
load_addr -
(mseg->addr + mseg->p_memsz);
mseg->p_memsz += seg->addr & ~PAGE_MASK;
mseg->p_memsz += seg->p_memsz;
loadmap->nsegs--;
continue;
}
}
mseg++;
if (mseg != seg)
*mseg = *seg;
}
#endif
kdebug("Mapped Object [%s]:", what);
kdebug("- elfhdr : %lx", params->elfhdr_addr);
kdebug("- entry : %lx", params->entry_addr);
kdebug("- PHDR[] : %lx", params->ph_addr);
kdebug("- DYNAMIC[]: %lx", params->dynamic_addr);
seg = loadmap->segs;
for (loop = 0; loop < loadmap->nsegs; loop++, seg++)
kdebug("- LOAD[%d] : %08llx-%08llx [va=%llx ms=%llx]",
loop,
(unsigned long long) seg->addr,
(unsigned long long) seg->addr + seg->p_memsz - 1,
(unsigned long long) seg->p_vaddr,
(unsigned long long) seg->p_memsz);
return 0;
dynamic_error:
printk("ELF FDPIC %s with invalid DYNAMIC section (inode=%lu)\n",
what, file_inode(file)->i_ino);
return -ELIBBAD;
}
/*****************************************************************************/
/*
* map a file with constant displacement under uClinux
*/
#ifndef CONFIG_MMU
static int elf_fdpic_map_file_constdisp_on_uclinux(
struct elf_fdpic_params *params,
struct file *file,
struct mm_struct *mm)
{
struct elf_fdpic_loadseg *seg;
struct elf_phdr *phdr;
unsigned long load_addr, base = ULONG_MAX, top = 0, maddr = 0;
int loop, ret;
load_addr = params->load_addr;
seg = params->loadmap->segs;
/* determine the bounds of the contiguous overall allocation we must
* make */
phdr = params->phdrs;
for (loop = 0; loop < params->hdr.e_phnum; loop++, phdr++) {
if (params->phdrs[loop].p_type != PT_LOAD)
continue;
if (base > phdr->p_vaddr)
base = phdr->p_vaddr;
if (top < phdr->p_vaddr + phdr->p_memsz)
top = phdr->p_vaddr + phdr->p_memsz;
}
/* allocate one big anon block for everything */
maddr = vm_mmap(NULL, load_addr, top - base,
PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE, 0);
if (IS_ERR_VALUE(maddr))
return (int) maddr;
if (load_addr != 0)
load_addr += PAGE_ALIGN(top - base);
/* and then load the file segments into it */
phdr = params->phdrs;
for (loop = 0; loop < params->hdr.e_phnum; loop++, phdr++) {
if (params->phdrs[loop].p_type != PT_LOAD)
continue;
seg->addr = maddr + (phdr->p_vaddr - base);
seg->p_vaddr = phdr->p_vaddr;
seg->p_memsz = phdr->p_memsz;
ret = read_code(file, seg->addr, phdr->p_offset,
phdr->p_filesz);
if (ret < 0)
return ret;
/* map the ELF header address if in this segment */
if (phdr->p_offset == 0)
params->elfhdr_addr = seg->addr;
/* clear any space allocated but not loaded */
if (phdr->p_filesz < phdr->p_memsz) {
if (clear_user((void *) (seg->addr + phdr->p_filesz),
phdr->p_memsz - phdr->p_filesz))
return -EFAULT;
}
if (mm) {
if (phdr->p_flags & PF_X) {
[PATCH] FDPIC: fix the /proc/pid/stat representation of executable boundaries Fix the /proc/pid/stat representation of executable boundaries. It should show the bounds of the executable, but instead shows the bounds of the loader. Before the patch is applied, the bug can be seen by examining, say, inetd: # ps | grep inetd 610 root 0 S /usr/sbin/inetd -i # cat /proc/610/maps c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3180000-c31dede4 r-xs 00000000 00:0b 14582179 /lib/libuClibc-0.9.28.so c328c000-c328ea00 rw-p 00008000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3290000-c329b6c0 rw-p 00000000 00:00 0 c32a0000-c32c0000 rwxp 00000000 00:00 0 c32d4000-c32d8000 rw-p 00000000 00:00 0 c3394000-c3398000 rw-p 00000000 00:00 0 c3458000-c345f464 r-xs 00000000 00:0b 16384612 /usr/sbin/inetd c3470000-c34748f8 rw-p 00004000 00:0b 16384612 /usr/sbin/inetd c34cc000-c34d0000 rw-p 00000000 00:00 0 c34d4000-c34d8000 rw-p 00000000 00:00 0 c34d8000-c34dc000 rw-p 00000000 00:00 0 # cat /proc/610/stat 610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 8 0 0 19 0 1 0 94392000718 950272 0 4294967295 3233480704 3233523592 3274440352 3274439976 3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0 The code boundaries are 3233480704 to 3233523592, which are: (gdb) p/x 3233480704 $1 = 0xc0bb0000 (gdb) p/x 3233523592 $2 = 0xc0bba788 Which corresponds to this line in the maps file: c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so Which is wrong. After the patch is applied, the maps file is pretty much identical (there's some minor shuffling of the location of some of the anonymous VMAs), but the stat file is now: # cat /proc/610/stat 610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 7 0 0 18 0 1 0 94392000722 950272 0 4294967295 3276111872 3276141668 3274440352 3274439976 3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0 The code boundaries are then 3276111872 to 3276141668, which are: (gdb) p/x 3276111872 $1 = 0xc3458000 (gdb) p/x 3276141668 $2 = 0xc345f464 And these correspond to this line in the maps file instead: c3458000-c345f464 r-xs 00000000 00:0b 16384612 /usr/sbin/inetd Which is now correct. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-23 07:10:00 +00:00
if (!mm->start_code) {
mm->start_code = seg->addr;
mm->end_code = seg->addr +
phdr->p_memsz;
}
} else if (!mm->start_data) {
mm->start_data = seg->addr;
mm->end_data = seg->addr + phdr->p_memsz;
}
}
seg++;
}
return 0;
}
#endif
/*****************************************************************************/
/*
* map a binary by direct mmap() of the individual PT_LOAD segments
*/
static int elf_fdpic_map_file_by_direct_mmap(struct elf_fdpic_params *params,
struct file *file,
struct mm_struct *mm)
{
struct elf_fdpic_loadseg *seg;
struct elf_phdr *phdr;
unsigned long load_addr, delta_vaddr;
int loop, dvset;
load_addr = params->load_addr;
delta_vaddr = 0;
dvset = 0;
seg = params->loadmap->segs;
/* deal with each load segment separately */
phdr = params->phdrs;
for (loop = 0; loop < params->hdr.e_phnum; loop++, phdr++) {
unsigned long maddr, disp, excess, excess1;
int prot = 0, flags;
if (phdr->p_type != PT_LOAD)
continue;
kdebug("[LOAD] va=%lx of=%lx fs=%lx ms=%lx",
(unsigned long) phdr->p_vaddr,
(unsigned long) phdr->p_offset,
(unsigned long) phdr->p_filesz,
(unsigned long) phdr->p_memsz);
/* determine the mapping parameters */
if (phdr->p_flags & PF_R) prot |= PROT_READ;
if (phdr->p_flags & PF_W) prot |= PROT_WRITE;
if (phdr->p_flags & PF_X) prot |= PROT_EXEC;
binfmt: remove in-tree usage of MAP_DENYWRITE At exec time when we mmap the new executable via MAP_DENYWRITE we have it opened via do_open_execat() and already deny_write_access()'ed the file successfully. Once exec completes, we allow_write_acces(); however, we set mm->exe_file in begin_new_exec() via set_mm_exe_file() and also deny_write_access() as long as mm->exe_file remains set. We'll effectively deny write access to our executable via mm->exe_file until mm->exe_file is changed -- when the process is removed, on new exec, or via sys_prctl(PR_SET_MM_MAP/EXE_FILE). Let's remove all usage of MAP_DENYWRITE, it's no longer necessary for mm->exe_file. In case of an elf interpreter, we'll now only deny write access to the file during exec. This is somewhat okay, because the interpreter behaves (and sometime is) a shared library; all shared libraries, especially the ones loaded directly in user space like via dlopen() won't ever be mapped via MAP_DENYWRITE, because we ignore that from user space completely; these shared libraries can always be modified while mapped and executed. Let's only special-case the main executable, denying write access while being executed by a process. This can be considered a minor user space visible change. While this is a cleanup, it also fixes part of a problem reported with VM_DENYWRITE on overlayfs, as VM_DENYWRITE is effectively unused with this patch and will be removed next: "Overlayfs did not honor positive i_writecount on realfile for VM_DENYWRITE mappings." [1] [1] https://lore.kernel.org/r/YNHXzBgzRrZu1MrD@miu.piliscsaba.redhat.com/ Reported-by: Chengguang Xu <cgxu519@mykernel.net> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2021-04-23 07:42:41 +00:00
flags = MAP_PRIVATE;
maddr = 0;
switch (params->flags & ELF_FDPIC_FLAG_ARRANGEMENT) {
case ELF_FDPIC_FLAG_INDEPENDENT:
/* PT_LOADs are independently locatable */
break;
case ELF_FDPIC_FLAG_HONOURVADDR:
/* the specified virtual address must be honoured */
maddr = phdr->p_vaddr;
flags |= MAP_FIXED;
break;
case ELF_FDPIC_FLAG_CONSTDISP:
/* constant displacement
* - can be mapped anywhere, but must be mapped as a
* unit
*/
if (!dvset) {
maddr = load_addr;
delta_vaddr = phdr->p_vaddr;
dvset = 1;
} else {
maddr = load_addr + phdr->p_vaddr - delta_vaddr;
flags |= MAP_FIXED;
}
break;
case ELF_FDPIC_FLAG_CONTIGUOUS:
/* contiguity handled later */
break;
default:
BUG();
}
maddr &= PAGE_MASK;
/* create the mapping */
disp = phdr->p_vaddr & ~PAGE_MASK;
maddr = vm_mmap(file, maddr, phdr->p_memsz + disp, prot, flags,
phdr->p_offset - disp);
kdebug("mmap[%d] <file> sz=%llx pr=%x fl=%x of=%llx --> %08lx",
loop, (unsigned long long) phdr->p_memsz + disp,
prot, flags, (unsigned long long) phdr->p_offset - disp,
maddr);
if (IS_ERR_VALUE(maddr))
return (int) maddr;
if ((params->flags & ELF_FDPIC_FLAG_ARRANGEMENT) ==
ELF_FDPIC_FLAG_CONTIGUOUS)
load_addr += PAGE_ALIGN(phdr->p_memsz + disp);
seg->addr = maddr + disp;
seg->p_vaddr = phdr->p_vaddr;
seg->p_memsz = phdr->p_memsz;
/* map the ELF header address if in this segment */
if (phdr->p_offset == 0)
params->elfhdr_addr = seg->addr;
/* clear the bit between beginning of mapping and beginning of
* PT_LOAD */
if (prot & PROT_WRITE && disp > 0) {
kdebug("clear[%d] ad=%lx sz=%lx", loop, maddr, disp);
if (clear_user((void __user *) maddr, disp))
return -EFAULT;
maddr += disp;
}
/* clear any space allocated but not loaded
* - on uClinux we can just clear the lot
* - on MMU linux we'll get a SIGBUS beyond the last page
* extant in the file
*/
excess = phdr->p_memsz - phdr->p_filesz;
excess1 = PAGE_SIZE - ((maddr + phdr->p_filesz) & ~PAGE_MASK);
#ifdef CONFIG_MMU
if (excess > excess1) {
unsigned long xaddr = maddr + phdr->p_filesz + excess1;
unsigned long xmaddr;
flags |= MAP_FIXED | MAP_ANONYMOUS;
xmaddr = vm_mmap(NULL, xaddr, excess - excess1,
prot, flags, 0);
kdebug("mmap[%d] <anon>"
" ad=%lx sz=%lx pr=%x fl=%x of=0 --> %08lx",
loop, xaddr, excess - excess1, prot, flags,
xmaddr);
if (xmaddr != xaddr)
return -ENOMEM;
}
if (prot & PROT_WRITE && excess1 > 0) {
kdebug("clear[%d] ad=%lx sz=%lx",
loop, maddr + phdr->p_filesz, excess1);
if (clear_user((void __user *) maddr + phdr->p_filesz,
excess1))
return -EFAULT;
}
#else
if (excess > 0) {
kdebug("clear[%d] ad=%llx sz=%lx", loop,
(unsigned long long) maddr + phdr->p_filesz,
excess);
if (clear_user((void *) maddr + phdr->p_filesz, excess))
return -EFAULT;
}
#endif
if (mm) {
if (phdr->p_flags & PF_X) {
[PATCH] FDPIC: fix the /proc/pid/stat representation of executable boundaries Fix the /proc/pid/stat representation of executable boundaries. It should show the bounds of the executable, but instead shows the bounds of the loader. Before the patch is applied, the bug can be seen by examining, say, inetd: # ps | grep inetd 610 root 0 S /usr/sbin/inetd -i # cat /proc/610/maps c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3180000-c31dede4 r-xs 00000000 00:0b 14582179 /lib/libuClibc-0.9.28.so c328c000-c328ea00 rw-p 00008000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3290000-c329b6c0 rw-p 00000000 00:00 0 c32a0000-c32c0000 rwxp 00000000 00:00 0 c32d4000-c32d8000 rw-p 00000000 00:00 0 c3394000-c3398000 rw-p 00000000 00:00 0 c3458000-c345f464 r-xs 00000000 00:0b 16384612 /usr/sbin/inetd c3470000-c34748f8 rw-p 00004000 00:0b 16384612 /usr/sbin/inetd c34cc000-c34d0000 rw-p 00000000 00:00 0 c34d4000-c34d8000 rw-p 00000000 00:00 0 c34d8000-c34dc000 rw-p 00000000 00:00 0 # cat /proc/610/stat 610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 8 0 0 19 0 1 0 94392000718 950272 0 4294967295 3233480704 3233523592 3274440352 3274439976 3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0 The code boundaries are 3233480704 to 3233523592, which are: (gdb) p/x 3233480704 $1 = 0xc0bb0000 (gdb) p/x 3233523592 $2 = 0xc0bba788 Which corresponds to this line in the maps file: c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so Which is wrong. After the patch is applied, the maps file is pretty much identical (there's some minor shuffling of the location of some of the anonymous VMAs), but the stat file is now: # cat /proc/610/stat 610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 7 0 0 18 0 1 0 94392000722 950272 0 4294967295 3276111872 3276141668 3274440352 3274439976 3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0 The code boundaries are then 3276111872 to 3276141668, which are: (gdb) p/x 3276111872 $1 = 0xc3458000 (gdb) p/x 3276141668 $2 = 0xc345f464 And these correspond to this line in the maps file instead: c3458000-c345f464 r-xs 00000000 00:0b 16384612 /usr/sbin/inetd Which is now correct. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-23 07:10:00 +00:00
if (!mm->start_code) {
mm->start_code = maddr;
mm->end_code = maddr + phdr->p_memsz;
}
} else if (!mm->start_data) {
mm->start_data = maddr;
mm->end_data = maddr + phdr->p_memsz;
}
}
seg++;
}
return 0;
}
/*****************************************************************************/
/*
* ELF-FDPIC core dumper
*
* Modelled on fs/exec.c:aout_core_dump()
* Jeremy Fitzhardinge <jeremy@sw.oz.au>
*
* Modelled on fs/binfmt_elf.c core dumper
*/
#ifdef CONFIG_ELF_CORE
struct elf_prstatus_fdpic
{
struct elf_prstatus_common common;
elf_gregset_t pr_reg; /* GP registers */
/* When using FDPIC, the loadmap addresses need to be communicated
* to GDB in order for GDB to do the necessary relocations. The
* fields (below) used to communicate this information are placed
* immediately after ``pr_reg'', so that the loadmap addresses may
* be viewed as part of the register set if so desired.
*/
unsigned long pr_exec_fdpic_loadmap;
unsigned long pr_interp_fdpic_loadmap;
int pr_fpvalid; /* True if math co-processor being used. */
};
/* An ELF note in memory */
struct memelfnote
{
const char *name;
int type;
unsigned int datasz;
void *data;
};
static int notesize(struct memelfnote *en)
{
int sz;
sz = sizeof(struct elf_note);
sz += roundup(strlen(en->name) + 1, 4);
sz += roundup(en->datasz, 4);
return sz;
}
/* #define DEBUG */
static int writenote(struct memelfnote *men, struct coredump_params *cprm)
coredump: unify dump_seek() implementations for each binfmt_*.c The current ELF dumper can produce broken corefiles if program headers exceed 65535. In particular, the program in 64-bit environment often demands more than 65535 mmaps. If you google max_map_count, then you can find many users facing this problem. Solaris has already dealt with this issue, and other OSes have also adopted the same method as in Solaris. Currently, Sun's document and AMD 64 ABI include the description for the extension, where they call the extension Extended Numbering. See Reference for further information. I believe that linux kernel should adopt the same way as they did, so I've written this patch. I am also preparing for patches of GDB and binutils. How to fix ========== In new dumping process, there are two cases according to weather or not the number of program headers is equal to or more than 65535. - if less than 65535, the produced corefile format is exactly the same as the ordinary one. - if equal to or more than 65535, then e_phnum field is set to newly introduced constant PN_XNUM(0xffff) and the actual number of program headers is set to sh_info field of the section header at index 0. Compatibility Concern ===================== * As already mentioned in Summary, Sun and AMD64 has already adopted this. See Reference. * There are four combinations according to whether kernel and userland tools are respectively modified or not. The next table summarizes shortly for each combination. --------------------------------------------- Original Kernel | Modified Kernel --------------------------------------------- < 65535 | >= 65535 | < 65535 | >= 65535 ------------------------------------------------------------- Original Tools | OK | broken | OK | broken (#) ------------------------------------------------------------- Modified Tools | OK | broken | OK | OK ------------------------------------------------------------- Note that there is no case that `OK' changes to `broken'. (#) Although this case remains broken, O-M behaves better than O-O. That is, while in O-O case e_phnum field would be extremely small due to integer overflow, in O-M case it is guaranteed to be at least 65535 by being set to PN_XNUM(0xFFFF), much closer to the actual correct value than the O-O case. Test Program ============ Here is a test program mkmmaps.c that is useful to produce the corefile with many mmaps. To use this, please take the following steps: $ ulimit -c unlimited $ sysctl vm.max_map_count=70000 # default 65530 is too small $ sysctl fs.file-max=70000 $ mkmmaps 65535 Then, the program will abort and a corefile will be generated. If failed, there are two cases according to the error message displayed. * ``out of memory'' means vm.max_map_count is still smaller * ``too many open files'' means fs.file-max is still smaller So, please change it to a larger value, and then retry it. mkmmaps.c == #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <fcntl.h> #include <unistd.h> int main(int argc, char **argv) { int maps_num; if (argc < 2) { fprintf(stderr, "mkmmaps [number of maps to be created]\n"); exit(1); } if (sscanf(argv[1], "%d", &maps_num) == EOF) { perror("sscanf"); exit(2); } if (maps_num < 0) { fprintf(stderr, "%d is invalid\n", maps_num); exit(3); } for (; maps_num > 0; --maps_num) { if (MAP_FAILED == mmap((void *)NULL, (size_t) 1, PROT_READ, MAP_SHARED | MAP_ANONYMOUS, (int) -1, (off_t) NULL)) { perror("mmap"); exit(4); } } abort(); { char buffer[128]; sprintf(buffer, "wc -l /proc/%u/maps", getpid()); system(buffer); } return 0; } Tested on i386, ia64 and um/sys-i386. Built on sh4 (which covers fs/binfmt_elf_fdpic.c) References ========== - Sun microsystems: Linker and Libraries. Part No: 817-1984-17, September 2008. URL: http://docs.sun.com/app/docs/doc/817-1984 - System V ABI AMD64 Architecture Processor Supplement Draft Version 0.99., May 11, 2009. URL: http://www.x86-64.org/ This patch: There are three different definitions for dump_seek() functions in binfmt_aout.c, binfmt_elf.c and binfmt_elf_fdpic.c, respectively. The only for binfmt_elf.c. My next patch will move dump_seek() into a header file in order to share the same implementations for dump_write() and dump_seek(). As the first step, this patch unify these three definitions for dump_seek() by applying the past commits that have been applied only for binfmt_elf.c. Specifically, the modification made here is part of the following commits: * d025c9db7f31fc0554ce7fb2dfc78d35a77f3487 * 7f14daa19ea36b200d237ad3ac5826ae25360461 This patch does not change a shape of corefiles. Signed-off-by: Daisuke HATAYAMA <d.hatayama@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: David Howells <dhowells@redhat.com> Cc: Greg Ungerer <gerg@snapgear.com> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andi Kleen <andi@firstfloor.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:44:05 +00:00
{
struct elf_note en;
en.n_namesz = strlen(men->name) + 1;
en.n_descsz = men->datasz;
en.n_type = men->type;
return dump_emit(cprm, &en, sizeof(en)) &&
dump_emit(cprm, men->name, en.n_namesz) && dump_align(cprm, 4) &&
dump_emit(cprm, men->data, men->datasz) && dump_align(cprm, 4);
}
static inline void fill_elf_fdpic_header(struct elfhdr *elf, int segs)
{
memcpy(elf->e_ident, ELFMAG, SELFMAG);
elf->e_ident[EI_CLASS] = ELF_CLASS;
elf->e_ident[EI_DATA] = ELF_DATA;
elf->e_ident[EI_VERSION] = EV_CURRENT;
elf->e_ident[EI_OSABI] = ELF_OSABI;
memset(elf->e_ident+EI_PAD, 0, EI_NIDENT-EI_PAD);
elf->e_type = ET_CORE;
elf->e_machine = ELF_ARCH;
elf->e_version = EV_CURRENT;
elf->e_entry = 0;
elf->e_phoff = sizeof(struct elfhdr);
elf->e_shoff = 0;
elf->e_flags = ELF_FDPIC_CORE_EFLAGS;
elf->e_ehsize = sizeof(struct elfhdr);
elf->e_phentsize = sizeof(struct elf_phdr);
elf->e_phnum = segs;
elf->e_shentsize = 0;
elf->e_shnum = 0;
elf->e_shstrndx = 0;
return;
}
static inline void fill_elf_note_phdr(struct elf_phdr *phdr, int sz, loff_t offset)
{
phdr->p_type = PT_NOTE;
phdr->p_offset = offset;
phdr->p_vaddr = 0;
phdr->p_paddr = 0;
phdr->p_filesz = sz;
phdr->p_memsz = 0;
phdr->p_flags = 0;
phdr->p_align = 4;
return;
}
static inline void fill_note(struct memelfnote *note, const char *name, int type,
unsigned int sz, void *data)
{
note->name = name;
note->type = type;
note->datasz = sz;
note->data = data;
return;
}
/*
* fill up all the fields in prstatus from the given task struct, except
* registers which need to be filled up separately.
*/
static void fill_prstatus(struct elf_prstatus_common *prstatus,
struct task_struct *p, long signr)
{
prstatus->pr_info.si_signo = prstatus->pr_cursig = signr;
prstatus->pr_sigpend = p->pending.signal.sig[0];
prstatus->pr_sighold = p->blocked.sig[0];
rcu_read_lock();
prstatus->pr_ppid = task_pid_vnr(rcu_dereference(p->real_parent));
rcu_read_unlock();
prstatus->pr_pid = task_pid_vnr(p);
prstatus->pr_pgrp = task_pgrp_vnr(p);
prstatus->pr_sid = task_session_vnr(p);
if (thread_group_leader(p)) {
struct task_cputime cputime;
/*
* This is the record for the group leader. It shows the
* group-wide total, not its individual thread total.
*/
thread_group_cputime(p, &cputime);
prstatus->pr_utime = ns_to_kernel_old_timeval(cputime.utime);
prstatus->pr_stime = ns_to_kernel_old_timeval(cputime.stime);
} else {
u64 utime, stime;
task_cputime(p, &utime, &stime);
prstatus->pr_utime = ns_to_kernel_old_timeval(utime);
prstatus->pr_stime = ns_to_kernel_old_timeval(stime);
}
prstatus->pr_cutime = ns_to_kernel_old_timeval(p->signal->cutime);
prstatus->pr_cstime = ns_to_kernel_old_timeval(p->signal->cstime);
}
static int fill_psinfo(struct elf_prpsinfo *psinfo, struct task_struct *p,
struct mm_struct *mm)
{
const struct cred *cred;
unsigned int i, len;
unsigned int state;
/* first copy the parameters from user space */
memset(psinfo, 0, sizeof(struct elf_prpsinfo));
len = mm->arg_end - mm->arg_start;
if (len >= ELF_PRARGSZ)
len = ELF_PRARGSZ - 1;
if (copy_from_user(&psinfo->pr_psargs,
(const char __user *) mm->arg_start, len))
return -EFAULT;
for (i = 0; i < len; i++)
if (psinfo->pr_psargs[i] == 0)
psinfo->pr_psargs[i] = ' ';
psinfo->pr_psargs[len] = 0;
rcu_read_lock();
psinfo->pr_ppid = task_pid_vnr(rcu_dereference(p->real_parent));
rcu_read_unlock();
psinfo->pr_pid = task_pid_vnr(p);
psinfo->pr_pgrp = task_pgrp_vnr(p);
psinfo->pr_sid = task_session_vnr(p);
state = READ_ONCE(p->__state);
i = state ? ffz(~state) + 1 : 0;
psinfo->pr_state = i;
psinfo->pr_sname = (i > 5) ? '.' : "RSDTZW"[i];
psinfo->pr_zomb = psinfo->pr_sname == 'Z';
psinfo->pr_nice = task_nice(p);
psinfo->pr_flag = p->flags;
rcu_read_lock();
cred = __task_cred(p);
SET_UID(psinfo->pr_uid, from_kuid_munged(cred->user_ns, cred->uid));
SET_GID(psinfo->pr_gid, from_kgid_munged(cred->user_ns, cred->gid));
rcu_read_unlock();
strncpy(psinfo->pr_fname, p->comm, sizeof(psinfo->pr_fname));
return 0;
}
/* Here is the structure in which status of each thread is captured. */
struct elf_thread_status
{
struct elf_thread_status *next;
struct elf_prstatus_fdpic prstatus; /* NT_PRSTATUS */
elf_fpregset_t fpu; /* NT_PRFPREG */
struct memelfnote notes[2];
int num_notes;
};
/*
* In order to add the specific thread information for the elf file format,
* we need to keep a linked list of every thread's pr_status and then create
* a single section for them in the final core file.
*/
static struct elf_thread_status *elf_dump_thread_status(long signr, struct task_struct *p, int *sz)
{
const struct user_regset_view *view = task_user_regset_view(p);
struct elf_thread_status *t;
int i, ret;
t = kzalloc(sizeof(struct elf_thread_status), GFP_KERNEL);
if (!t)
return t;
fill_prstatus(&t->prstatus.common, p, signr);
t->prstatus.pr_exec_fdpic_loadmap = p->mm->context.exec_fdpic_loadmap;
t->prstatus.pr_interp_fdpic_loadmap = p->mm->context.interp_fdpic_loadmap;
regset_get(p, &view->regsets[0],
sizeof(t->prstatus.pr_reg), &t->prstatus.pr_reg);
fill_note(&t->notes[0], "CORE", NT_PRSTATUS, sizeof(t->prstatus),
&t->prstatus);
t->num_notes++;
*sz += notesize(&t->notes[0]);
for (i = 1; i < view->n; ++i) {
const struct user_regset *regset = &view->regsets[i];
if (regset->core_note_type != NT_PRFPREG)
continue;
if (regset->active && regset->active(p, regset) <= 0)
continue;
ret = regset_get(p, regset, sizeof(t->fpu), &t->fpu);
if (ret >= 0)
t->prstatus.pr_fpvalid = 1;
break;
}
if (t->prstatus.pr_fpvalid) {
fill_note(&t->notes[1], "CORE", NT_PRFPREG, sizeof(t->fpu),
&t->fpu);
t->num_notes++;
*sz += notesize(&t->notes[1]);
}
return t;
}
static void fill_extnum_info(struct elfhdr *elf, struct elf_shdr *shdr4extnum,
elf_addr_t e_shoff, int segs)
{
elf->e_shoff = e_shoff;
elf->e_shentsize = sizeof(*shdr4extnum);
elf->e_shnum = 1;
elf->e_shstrndx = SHN_UNDEF;
memset(shdr4extnum, 0, sizeof(*shdr4extnum));
shdr4extnum->sh_type = SHT_NULL;
shdr4extnum->sh_size = elf->e_shnum;
shdr4extnum->sh_link = elf->e_shstrndx;
shdr4extnum->sh_info = segs;
}
/*
* dump the segments for an MMU process
*/
binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot In both binfmt_elf and binfmt_elf_fdpic, use a new helper dump_vma_snapshot() to take a snapshot of the VMA list (including the gate VMA, if we have one) while protected by the mmap_lock, and then use that snapshot instead of walking the VMA list without locking. An alternative approach would be to keep the mmap_lock held across the entire core dumping operation; however, keeping the mmap_lock locked while we may be blocked for an unbounded amount of time (e.g. because we're dumping to a FUSE filesystem or so) isn't really optimal; the mmap_lock blocks things like the ->release handler of userfaultfd, and we don't really want critical system daemons to grind to a halt just because someone "gifted" them SCM_RIGHTS to an eternally-locked userfaultfd, or something like that. Since both the normal ELF code and the FDPIC ELF code need this functionality (and if any other binfmt wants to add coredump support in the future, they'd probably need it, too), implement this with a common helper in fs/coredump.c. A downside of this approach is that we now need a bigger amount of kernel memory per userspace VMA in the normal ELF case, and that we need O(n) kernel memory in the FDPIC ELF case at all; but 40 bytes per VMA shouldn't be terribly bad. There currently is a data race between stack expansion and anything that reads ->vm_start or ->vm_end under the mmap_lock held in read mode; to mitigate that for core dumping, take the mmap_lock in write mode when taking a snapshot of the VMA hierarchy. (If we only took the mmap_lock in read mode, we could end up with a corrupted core dump if someone does get_user_pages_remote() concurrently. Not really a major problem, but taking the mmap_lock either way works here, so we might as well avoid the issue.) (This doesn't do anything about the existing data races with stack expansion in other mm code.) Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200827114932.3572699-6-jannh@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 03:12:54 +00:00
static bool elf_fdpic_dump_segments(struct coredump_params *cprm,
struct core_vma_metadata *vma_meta,
int vma_count)
{
binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot In both binfmt_elf and binfmt_elf_fdpic, use a new helper dump_vma_snapshot() to take a snapshot of the VMA list (including the gate VMA, if we have one) while protected by the mmap_lock, and then use that snapshot instead of walking the VMA list without locking. An alternative approach would be to keep the mmap_lock held across the entire core dumping operation; however, keeping the mmap_lock locked while we may be blocked for an unbounded amount of time (e.g. because we're dumping to a FUSE filesystem or so) isn't really optimal; the mmap_lock blocks things like the ->release handler of userfaultfd, and we don't really want critical system daemons to grind to a halt just because someone "gifted" them SCM_RIGHTS to an eternally-locked userfaultfd, or something like that. Since both the normal ELF code and the FDPIC ELF code need this functionality (and if any other binfmt wants to add coredump support in the future, they'd probably need it, too), implement this with a common helper in fs/coredump.c. A downside of this approach is that we now need a bigger amount of kernel memory per userspace VMA in the normal ELF case, and that we need O(n) kernel memory in the FDPIC ELF case at all; but 40 bytes per VMA shouldn't be terribly bad. There currently is a data race between stack expansion and anything that reads ->vm_start or ->vm_end under the mmap_lock held in read mode; to mitigate that for core dumping, take the mmap_lock in write mode when taking a snapshot of the VMA hierarchy. (If we only took the mmap_lock in read mode, we could end up with a corrupted core dump if someone does get_user_pages_remote() concurrently. Not really a major problem, but taking the mmap_lock either way works here, so we might as well avoid the issue.) (This doesn't do anything about the existing data races with stack expansion in other mm code.) Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200827114932.3572699-6-jannh@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 03:12:54 +00:00
int i;
binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot In both binfmt_elf and binfmt_elf_fdpic, use a new helper dump_vma_snapshot() to take a snapshot of the VMA list (including the gate VMA, if we have one) while protected by the mmap_lock, and then use that snapshot instead of walking the VMA list without locking. An alternative approach would be to keep the mmap_lock held across the entire core dumping operation; however, keeping the mmap_lock locked while we may be blocked for an unbounded amount of time (e.g. because we're dumping to a FUSE filesystem or so) isn't really optimal; the mmap_lock blocks things like the ->release handler of userfaultfd, and we don't really want critical system daemons to grind to a halt just because someone "gifted" them SCM_RIGHTS to an eternally-locked userfaultfd, or something like that. Since both the normal ELF code and the FDPIC ELF code need this functionality (and if any other binfmt wants to add coredump support in the future, they'd probably need it, too), implement this with a common helper in fs/coredump.c. A downside of this approach is that we now need a bigger amount of kernel memory per userspace VMA in the normal ELF case, and that we need O(n) kernel memory in the FDPIC ELF case at all; but 40 bytes per VMA shouldn't be terribly bad. There currently is a data race between stack expansion and anything that reads ->vm_start or ->vm_end under the mmap_lock held in read mode; to mitigate that for core dumping, take the mmap_lock in write mode when taking a snapshot of the VMA hierarchy. (If we only took the mmap_lock in read mode, we could end up with a corrupted core dump if someone does get_user_pages_remote() concurrently. Not really a major problem, but taking the mmap_lock either way works here, so we might as well avoid the issue.) (This doesn't do anything about the existing data races with stack expansion in other mm code.) Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200827114932.3572699-6-jannh@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 03:12:54 +00:00
for (i = 0; i < vma_count; i++) {
struct core_vma_metadata *meta = vma_meta + i;
binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot In both binfmt_elf and binfmt_elf_fdpic, use a new helper dump_vma_snapshot() to take a snapshot of the VMA list (including the gate VMA, if we have one) while protected by the mmap_lock, and then use that snapshot instead of walking the VMA list without locking. An alternative approach would be to keep the mmap_lock held across the entire core dumping operation; however, keeping the mmap_lock locked while we may be blocked for an unbounded amount of time (e.g. because we're dumping to a FUSE filesystem or so) isn't really optimal; the mmap_lock blocks things like the ->release handler of userfaultfd, and we don't really want critical system daemons to grind to a halt just because someone "gifted" them SCM_RIGHTS to an eternally-locked userfaultfd, or something like that. Since both the normal ELF code and the FDPIC ELF code need this functionality (and if any other binfmt wants to add coredump support in the future, they'd probably need it, too), implement this with a common helper in fs/coredump.c. A downside of this approach is that we now need a bigger amount of kernel memory per userspace VMA in the normal ELF case, and that we need O(n) kernel memory in the FDPIC ELF case at all; but 40 bytes per VMA shouldn't be terribly bad. There currently is a data race between stack expansion and anything that reads ->vm_start or ->vm_end under the mmap_lock held in read mode; to mitigate that for core dumping, take the mmap_lock in write mode when taking a snapshot of the VMA hierarchy. (If we only took the mmap_lock in read mode, we could end up with a corrupted core dump if someone does get_user_pages_remote() concurrently. Not really a major problem, but taking the mmap_lock either way works here, so we might as well avoid the issue.) (This doesn't do anything about the existing data races with stack expansion in other mm code.) Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200827114932.3572699-6-jannh@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 03:12:54 +00:00
if (!dump_user_range(cprm, meta->start, meta->dump_size))
return false;
}
return true;
}
/*
* Actual dumper
*
* This is a two-pass process; first we find the offsets of the bits,
* and then they are actually written out. If we run out of core limit
* we just truncate.
*/
static int elf_fdpic_core_dump(struct coredump_params *cprm)
{
int has_dumped = 0;
int segs;
int i;
struct elfhdr *elf = NULL;
loff_t offset = 0, dataoff;
struct memelfnote psinfo_note, auxv_note;
struct elf_prpsinfo *psinfo = NULL; /* NT_PRPSINFO */
struct elf_thread_status *thread_list = NULL;
int thread_status_size = 0;
elf_addr_t *auxv;
struct elf_phdr *phdr4note = NULL;
struct elf_shdr *shdr4extnum = NULL;
Elf_Half e_phnum;
elf_addr_t e_shoff;
struct core_thread *ct;
struct elf_thread_status *tmp;
/* alloc memory for large data structures: too large to be on stack */
elf = kmalloc(sizeof(*elf), GFP_KERNEL);
if (!elf)
goto end_coredump;
psinfo = kmalloc(sizeof(*psinfo), GFP_KERNEL);
if (!psinfo)
goto end_coredump;
coredump: Limit coredumps to a single thread group Today when a signal is delivered with a handler of SIG_DFL whose default behavior is to generate a core dump not only that process but every process that shares the mm is killed. In the case of vfork this looks like a real world problem. Consider the following well defined sequence. if (vfork() == 0) { execve(...); _exit(EXIT_FAILURE); } If a signal that generates a core dump is received after vfork but before the execve changes the mm the process that called vfork will also be killed (as the mm is shared). Similarly if the execve fails after the point of no return the kernel delivers SIGSEGV which will kill both the exec'ing process and because the mm is shared the process that called vfork as well. As far as I can tell this behavior is a violation of people's reasonable expectations, POSIX, and is unnecessarily fragile when the system is low on memory. Solve this by making a userspace visible change to only kill a single process/thread group. This is possible because Jann Horn recently modified[1] the coredump code so that the mm can safely be modified while the coredump is happening. With LinuxThreads long gone I don't expect anyone to have a notice this behavior change in practice. To accomplish this move the core_state pointer from mm_struct to signal_struct, which allows different thread groups to coredump simultatenously. In zap_threads remove the work to kill anything except for the current thread group. v2: Remove core_state from the VM_BUG_ON_MM print to fix compile failure when CONFIG_DEBUG_VM is enabled. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> [1] a07279c9a8cd ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot") Fixes: d89f3847def4 ("[PATCH] thread-aware coredumps, 2.5.43-C3") History-tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Link: https://lkml.kernel.org/r/87y27mvnke.fsf@disp2133 Link: https://lkml.kernel.org/r/20211007144701.67592574@canb.auug.org.au Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-09-22 16:24:02 +00:00
for (ct = current->signal->core_state->dumper.next;
ct; ct = ct->next) {
tmp = elf_dump_thread_status(cprm->siginfo->si_signo,
ct->task, &thread_status_size);
if (!tmp)
goto end_coredump;
tmp->next = thread_list;
thread_list = tmp;
}
/* now collect the dump for the current */
tmp = elf_dump_thread_status(cprm->siginfo->si_signo,
current, &thread_status_size);
if (!tmp)
goto end_coredump;
tmp->next = thread_list;
thread_list = tmp;
segs = cprm->vma_count + elf_core_extra_phdrs(cprm);
/* for notes section */
segs++;
/* If segs > PN_XNUM(0xffff), then e_phnum overflows. To avoid
* this, kernel supports extended numbering. Have a look at
* include/linux/elf.h for further information. */
e_phnum = segs > PN_XNUM ? PN_XNUM : segs;
/* Set up header */
fill_elf_fdpic_header(elf, e_phnum);
has_dumped = 1;
/*
* Set up the notes in similar form to SVR4 core dumps made
* with info from their /proc.
*/
fill_psinfo(psinfo, current->group_leader, current->mm);
fill_note(&psinfo_note, "CORE", NT_PRPSINFO, sizeof(*psinfo), psinfo);
thread_status_size += notesize(&psinfo_note);
auxv = (elf_addr_t *) current->mm->saved_auxv;
i = 0;
do
i += 2;
while (auxv[i - 2] != AT_NULL);
fill_note(&auxv_note, "CORE", NT_AUXV, i * sizeof(elf_addr_t), auxv);
thread_status_size += notesize(&auxv_note);
offset = sizeof(*elf); /* ELF header */
offset += segs * sizeof(struct elf_phdr); /* Program headers */
/* Write notes phdr entry */
phdr4note = kmalloc(sizeof(*phdr4note), GFP_KERNEL);
if (!phdr4note)
goto end_coredump;
fill_elf_note_phdr(phdr4note, thread_status_size, offset);
offset += thread_status_size;
/* Page-align dumped data */
dataoff = offset = roundup(offset, ELF_EXEC_PAGESIZE);
offset += cprm->vma_data_size;
offset += elf_core_extra_data_size(cprm);
e_shoff = offset;
if (e_phnum == PN_XNUM) {
shdr4extnum = kmalloc(sizeof(*shdr4extnum), GFP_KERNEL);
if (!shdr4extnum)
goto end_coredump;
fill_extnum_info(elf, shdr4extnum, e_shoff, segs);
}
offset = dataoff;
if (!dump_emit(cprm, elf, sizeof(*elf)))
goto end_coredump;
if (!dump_emit(cprm, phdr4note, sizeof(*phdr4note)))
goto end_coredump;
/* write program headers for segments dump */
for (i = 0; i < cprm->vma_count; i++) {
struct core_vma_metadata *meta = cprm->vma_meta + i;
struct elf_phdr phdr;
size_t sz;
binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot In both binfmt_elf and binfmt_elf_fdpic, use a new helper dump_vma_snapshot() to take a snapshot of the VMA list (including the gate VMA, if we have one) while protected by the mmap_lock, and then use that snapshot instead of walking the VMA list without locking. An alternative approach would be to keep the mmap_lock held across the entire core dumping operation; however, keeping the mmap_lock locked while we may be blocked for an unbounded amount of time (e.g. because we're dumping to a FUSE filesystem or so) isn't really optimal; the mmap_lock blocks things like the ->release handler of userfaultfd, and we don't really want critical system daemons to grind to a halt just because someone "gifted" them SCM_RIGHTS to an eternally-locked userfaultfd, or something like that. Since both the normal ELF code and the FDPIC ELF code need this functionality (and if any other binfmt wants to add coredump support in the future, they'd probably need it, too), implement this with a common helper in fs/coredump.c. A downside of this approach is that we now need a bigger amount of kernel memory per userspace VMA in the normal ELF case, and that we need O(n) kernel memory in the FDPIC ELF case at all; but 40 bytes per VMA shouldn't be terribly bad. There currently is a data race between stack expansion and anything that reads ->vm_start or ->vm_end under the mmap_lock held in read mode; to mitigate that for core dumping, take the mmap_lock in write mode when taking a snapshot of the VMA hierarchy. (If we only took the mmap_lock in read mode, we could end up with a corrupted core dump if someone does get_user_pages_remote() concurrently. Not really a major problem, but taking the mmap_lock either way works here, so we might as well avoid the issue.) (This doesn't do anything about the existing data races with stack expansion in other mm code.) Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200827114932.3572699-6-jannh@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 03:12:54 +00:00
sz = meta->end - meta->start;
phdr.p_type = PT_LOAD;
phdr.p_offset = offset;
binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot In both binfmt_elf and binfmt_elf_fdpic, use a new helper dump_vma_snapshot() to take a snapshot of the VMA list (including the gate VMA, if we have one) while protected by the mmap_lock, and then use that snapshot instead of walking the VMA list without locking. An alternative approach would be to keep the mmap_lock held across the entire core dumping operation; however, keeping the mmap_lock locked while we may be blocked for an unbounded amount of time (e.g. because we're dumping to a FUSE filesystem or so) isn't really optimal; the mmap_lock blocks things like the ->release handler of userfaultfd, and we don't really want critical system daemons to grind to a halt just because someone "gifted" them SCM_RIGHTS to an eternally-locked userfaultfd, or something like that. Since both the normal ELF code and the FDPIC ELF code need this functionality (and if any other binfmt wants to add coredump support in the future, they'd probably need it, too), implement this with a common helper in fs/coredump.c. A downside of this approach is that we now need a bigger amount of kernel memory per userspace VMA in the normal ELF case, and that we need O(n) kernel memory in the FDPIC ELF case at all; but 40 bytes per VMA shouldn't be terribly bad. There currently is a data race between stack expansion and anything that reads ->vm_start or ->vm_end under the mmap_lock held in read mode; to mitigate that for core dumping, take the mmap_lock in write mode when taking a snapshot of the VMA hierarchy. (If we only took the mmap_lock in read mode, we could end up with a corrupted core dump if someone does get_user_pages_remote() concurrently. Not really a major problem, but taking the mmap_lock either way works here, so we might as well avoid the issue.) (This doesn't do anything about the existing data races with stack expansion in other mm code.) Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200827114932.3572699-6-jannh@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 03:12:54 +00:00
phdr.p_vaddr = meta->start;
phdr.p_paddr = 0;
binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot In both binfmt_elf and binfmt_elf_fdpic, use a new helper dump_vma_snapshot() to take a snapshot of the VMA list (including the gate VMA, if we have one) while protected by the mmap_lock, and then use that snapshot instead of walking the VMA list without locking. An alternative approach would be to keep the mmap_lock held across the entire core dumping operation; however, keeping the mmap_lock locked while we may be blocked for an unbounded amount of time (e.g. because we're dumping to a FUSE filesystem or so) isn't really optimal; the mmap_lock blocks things like the ->release handler of userfaultfd, and we don't really want critical system daemons to grind to a halt just because someone "gifted" them SCM_RIGHTS to an eternally-locked userfaultfd, or something like that. Since both the normal ELF code and the FDPIC ELF code need this functionality (and if any other binfmt wants to add coredump support in the future, they'd probably need it, too), implement this with a common helper in fs/coredump.c. A downside of this approach is that we now need a bigger amount of kernel memory per userspace VMA in the normal ELF case, and that we need O(n) kernel memory in the FDPIC ELF case at all; but 40 bytes per VMA shouldn't be terribly bad. There currently is a data race between stack expansion and anything that reads ->vm_start or ->vm_end under the mmap_lock held in read mode; to mitigate that for core dumping, take the mmap_lock in write mode when taking a snapshot of the VMA hierarchy. (If we only took the mmap_lock in read mode, we could end up with a corrupted core dump if someone does get_user_pages_remote() concurrently. Not really a major problem, but taking the mmap_lock either way works here, so we might as well avoid the issue.) (This doesn't do anything about the existing data races with stack expansion in other mm code.) Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200827114932.3572699-6-jannh@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 03:12:54 +00:00
phdr.p_filesz = meta->dump_size;
phdr.p_memsz = sz;
offset += phdr.p_filesz;
binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot In both binfmt_elf and binfmt_elf_fdpic, use a new helper dump_vma_snapshot() to take a snapshot of the VMA list (including the gate VMA, if we have one) while protected by the mmap_lock, and then use that snapshot instead of walking the VMA list without locking. An alternative approach would be to keep the mmap_lock held across the entire core dumping operation; however, keeping the mmap_lock locked while we may be blocked for an unbounded amount of time (e.g. because we're dumping to a FUSE filesystem or so) isn't really optimal; the mmap_lock blocks things like the ->release handler of userfaultfd, and we don't really want critical system daemons to grind to a halt just because someone "gifted" them SCM_RIGHTS to an eternally-locked userfaultfd, or something like that. Since both the normal ELF code and the FDPIC ELF code need this functionality (and if any other binfmt wants to add coredump support in the future, they'd probably need it, too), implement this with a common helper in fs/coredump.c. A downside of this approach is that we now need a bigger amount of kernel memory per userspace VMA in the normal ELF case, and that we need O(n) kernel memory in the FDPIC ELF case at all; but 40 bytes per VMA shouldn't be terribly bad. There currently is a data race between stack expansion and anything that reads ->vm_start or ->vm_end under the mmap_lock held in read mode; to mitigate that for core dumping, take the mmap_lock in write mode when taking a snapshot of the VMA hierarchy. (If we only took the mmap_lock in read mode, we could end up with a corrupted core dump if someone does get_user_pages_remote() concurrently. Not really a major problem, but taking the mmap_lock either way works here, so we might as well avoid the issue.) (This doesn't do anything about the existing data races with stack expansion in other mm code.) Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200827114932.3572699-6-jannh@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 03:12:54 +00:00
phdr.p_flags = 0;
if (meta->flags & VM_READ)
phdr.p_flags |= PF_R;
if (meta->flags & VM_WRITE)
phdr.p_flags |= PF_W;
binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot In both binfmt_elf and binfmt_elf_fdpic, use a new helper dump_vma_snapshot() to take a snapshot of the VMA list (including the gate VMA, if we have one) while protected by the mmap_lock, and then use that snapshot instead of walking the VMA list without locking. An alternative approach would be to keep the mmap_lock held across the entire core dumping operation; however, keeping the mmap_lock locked while we may be blocked for an unbounded amount of time (e.g. because we're dumping to a FUSE filesystem or so) isn't really optimal; the mmap_lock blocks things like the ->release handler of userfaultfd, and we don't really want critical system daemons to grind to a halt just because someone "gifted" them SCM_RIGHTS to an eternally-locked userfaultfd, or something like that. Since both the normal ELF code and the FDPIC ELF code need this functionality (and if any other binfmt wants to add coredump support in the future, they'd probably need it, too), implement this with a common helper in fs/coredump.c. A downside of this approach is that we now need a bigger amount of kernel memory per userspace VMA in the normal ELF case, and that we need O(n) kernel memory in the FDPIC ELF case at all; but 40 bytes per VMA shouldn't be terribly bad. There currently is a data race between stack expansion and anything that reads ->vm_start or ->vm_end under the mmap_lock held in read mode; to mitigate that for core dumping, take the mmap_lock in write mode when taking a snapshot of the VMA hierarchy. (If we only took the mmap_lock in read mode, we could end up with a corrupted core dump if someone does get_user_pages_remote() concurrently. Not really a major problem, but taking the mmap_lock either way works here, so we might as well avoid the issue.) (This doesn't do anything about the existing data races with stack expansion in other mm code.) Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200827114932.3572699-6-jannh@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 03:12:54 +00:00
if (meta->flags & VM_EXEC)
phdr.p_flags |= PF_X;
phdr.p_align = ELF_EXEC_PAGESIZE;
if (!dump_emit(cprm, &phdr, sizeof(phdr)))
goto end_coredump;
}
if (!elf_core_write_extra_phdrs(cprm, offset))
goto end_coredump;
/* write out the notes section */
if (!writenote(thread_list->notes, cprm))
goto end_coredump;
if (!writenote(&psinfo_note, cprm))
goto end_coredump;
if (!writenote(&auxv_note, cprm))
goto end_coredump;
for (i = 1; i < thread_list->num_notes; i++)
if (!writenote(thread_list->notes + i, cprm))
goto end_coredump;
/* write out the thread status notes section */
for (tmp = thread_list->next; tmp; tmp = tmp->next) {
for (i = 0; i < tmp->num_notes; i++)
if (!writenote(&tmp->notes[i], cprm))
goto end_coredump;
}
dump_skip_to(cprm, dataoff);
if (!elf_fdpic_dump_segments(cprm, cprm->vma_meta, cprm->vma_count))
goto end_coredump;
if (!elf_core_write_extra_data(cprm))
goto end_coredump;
if (e_phnum == PN_XNUM) {
if (!dump_emit(cprm, shdr4extnum, sizeof(*shdr4extnum)))
goto end_coredump;
}
if (cprm->file->f_pos != offset) {
/* Sanity check */
printk(KERN_WARNING
"elf_core_dump: file->f_pos (%lld) != offset (%lld)\n",
cprm->file->f_pos, offset);
}
end_coredump:
while (thread_list) {
tmp = thread_list;
thread_list = thread_list->next;
kfree(tmp);
}
kfree(phdr4note);
kfree(elf);
kfree(psinfo);
kfree(shdr4extnum);
return has_dumped;
}
#endif /* CONFIG_ELF_CORE */