linux-stable/tools/perf/builtin-inject.c

2394 lines
61 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
/*
* builtin-inject.c
*
* Builtin inject command: Examine the live mode (stdin) event stream
* and repipe it to stdout while optionally injecting additional
* events into it.
*/
#include "builtin.h"
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
#include "util/color.h"
#include "util/dso.h"
#include "util/vdso.h"
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
#include "util/evlist.h"
#include "util/evsel.h"
#include "util/map.h"
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
#include "util/session.h"
#include "util/tool.h"
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
#include "util/debug.h"
#include "util/build-id.h"
#include "util/data.h"
#include "util/auxtrace.h"
perf inject: Add jitdump mmap injection support This patch adds a --jit/-j option to perf inject. This options injects MMAP records into the perf.data file to cover the jitted code mmaps. It also emits ELF images for each function in the jidump file. Those images are created where the jitdump file is. The MMAP records point to that location as well. Typical flow: $ perf record -k mono -- java -agentpath:libpjvmti.so java_class $ perf inject --jit -i perf.data -o perf.data.jitted $ perf report -i perf.data.jitted Note that jitdump.h support is not limited to Java, it works with any jitted environment modified to emit the jitdump file format, include those where code can be jitted multiple times and moved around. The jitdump.h format is adapted from the Oprofile project. The genelf.c (ELF binary generation) depends on MD5 hash encoding for the buildid. To enable this, libssl-dev must be installed. If not, then genelf.c defaults to using urandom to generate the buildid, which is not ideal. The Makefile auto-detects the presence on libssl-dev. This version mmaps the jitdump file to create a marker MMAP record in the perf.data file. The marker is used to detect jitdump and cause perf inject to inject the jitted mmaps and generate ELF images for jitted functions. In V8, the following fixes and changes were made among other things: - the jidump header format include a new flags field to be used to carry information about the configuration of the runtime agent. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix mmap pgoff: MMAP event pgoff must be the offset within the ELF file at which the code resides. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix ELF virtual addresses: perf tools expect the ELF virtual addresses of dynamic objects to match the file offset. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - JIT MMAP injection does not obey finished_round semantics. JIT MMAP injection injects all MMAP events in one go, so it does not obey finished_round semantics, so drop the finished_round events from the output perf.data file. Contributed by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carl Love <cel@us.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John McCutchan <johnmccutchan@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com [ Moved inject.build_ids ordering bits to a separate patch, fixed the NO_LIBELF=1 build ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-30 09:02:21 +00:00
#include "util/jit.h"
perf inject: Add a command line option to specify build ids. This commit adds the option --known-build-ids to perf inject. It allows the user to explicitly specify the build id for a given path, instead of retrieving it from the current system. This is useful in cases where a perf.data file is processed on a different system from where it was collected, or if some of the binaries are no longer available. The build ids and paths are specified in pairs in the command line. Using the file:// specifier, build ids can be loaded from a file directly generated by perf buildid-list. This is convenient to copy build ids from one perf.data file to another. ** Example: In this example we use perf record to create two perf.data files, one with build ids and another without, and use perf buildid-list and perf inject to copy the build ids from the first file to the second. $ perf record ls /tmp $ perf record --no-buildid -o perf.data.no-buildid ls /tmp $ perf buildid-list > build-ids.txt $ perf inject -b --known-build-ids='file://build-ids.txt' \ -i perf.data.no-buildid -o perf.data.buildid Signed-off-by: Raul Silvera <rsilvera@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220815225922.2118745-1-rsilvera@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-15 22:59:22 +00:00
#include "util/string2.h"
#include "util/symbol.h"
#include "util/synthetic-events.h"
#include "util/thread.h"
#include "util/namespaces.h"
#include "util/util.h"
perf inject: Add support for injecting guest sideband events Inject events from a perf.data file recorded in a virtual machine into a perf.data file recorded on the host at the same time. Only side band events (e.g. mmap, comm, fork, exit etc) and build IDs are injected. Additionally, the guest kcore_dir is copied as kcore_dir__ appended to the machine PID. This is non-trivial because: o It is not possible to process 2 sessions simultaneously so instead events are first written to a temporary file. o To avoid conflict, guest sample IDs are replaced with new unused sample IDs. o Guest event's CPU is changed to be the host CPU because it is more useful for reporting and analysis. o Sample ID is mapped to machine PID which is recorded with VCPU in the id index. This is important to allow guest events to be related to the guest machine and VCPU. o Timestamps must be converted. o Events are inserted to obey finished-round ordering. The anticipated use-case is: - start recording sideband events in a guest machine - start recording an AUX area trace on the host which can trace also the guest (e.g. Intel PT) - run test case on the guest - stop recording on the host - stop recording on the guest - copy the guest perf.data file to the host - inject the guest perf.data file sideband events into the host perf.data file using perf inject - the resulting perf.data file can now be used Subsequent patches provide Intel PT support for this. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220711093218.10967-25-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-11 09:32:07 +00:00
#include "util/tsc.h"
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
perf inject: Keep some features sections from input file perf inject overwrites feature sections with information from the current machine. It makes more sense to keep original information that describes the machine or software when perf record was run. Example: perf.data from "Desktop" injected on "nuc11" Before: $ perf script --header-only -i perf.data-from-desktop | head -15 # ======== # captured on : Thu May 19 09:55:50 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : Desktop # os release : 5.13.0-41-generic # perf version : 5.18.rc5.gac837f7ca7ed # arch : x86_64 # nrcpus online : 28 # nrcpus avail : 28 # cpudesc : Intel(R) Core(TM) i9-9940X CPU @ 3.30GHz # cpuid : GenuineIntel,6,85,4 # total memory : 65548656 kB $ perf inject -i perf.data-from-desktop -o injected-perf.data $ perf script --header-only -i injected-perf.data | head -15 # ======== # captured on : Fri May 20 15:06:55 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : nuc11 # os release : 5.17.5-local # perf version : 5.18.rc5.g0f828fdeb9af # arch : x86_64 # nrcpus online : 8 # nrcpus avail : 8 # cpudesc : 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz # cpuid : GenuineIntel,6,140,1 # total memory : 16012124 kB After: $ perf inject -i perf.data-from-desktop -o injected-perf.data $ perf script --header-only -i injected-perf.data | head -15 # ======== # captured on : Fri May 20 15:08:54 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : Desktop # os release : 5.13.0-41-generic # perf version : 5.18.rc5.gac837f7ca7ed # arch : x86_64 # nrcpus online : 28 # nrcpus avail : 28 # cpudesc : Intel(R) Core(TM) i9-9940X CPU @ 3.30GHz # cpuid : GenuineIntel,6,85,4 # total memory : 65548656 kB Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220520132404.25853-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-05-20 13:24:02 +00:00
#include <internal/lib.h>
perf inject: Do not load map/dso when injecting build-id No need to load symbols in a DSO when injecting build-id. I guess the reason was to check the DSO is a special file like anon files. Use some helper functions in map.c to check them before reading build-id. Also pass sample event's cpumode to a new build-id event. It brought a speedup in the benchmark of 25 -> 21 msec on my laptop. Also the memory usage (Max RSS) went down by ~200 KB. # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 21.389 msec (+- 0.138 msec) Average time per event: 2.097 usec (+- 0.014 usec) Average memory usage: 8225 KB (+- 0 KB) Committer notes: Before: $ perf stat -r5 perf bench internals inject-build-id > /dev/null Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 4,020.56 msec task-clock:u # 1.271 CPUs utilized ( +- 0.74% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 123,354 page-faults:u # 0.031 M/sec ( +- 0.81% ) 7,119,951,568 cycles:u # 1.771 GHz ( +- 1.74% ) (83.27%) 230,086,969 stalled-cycles-frontend:u # 3.23% frontend cycles idle ( +- 1.97% ) (83.41%) 1,168,298,765 stalled-cycles-backend:u # 16.41% backend cycles idle ( +- 1.13% ) (83.44%) 11,173,083,669 instructions:u # 1.57 insn per cycle # 0.10 stalled cycles per insn ( +- 1.58% ) (83.31%) 2,413,908,936 branches:u # 600.392 M/sec ( +- 1.69% ) (83.26%) 46,576,289 branch-misses:u # 1.93% of all branches ( +- 2.20% ) (83.31%) 3.1638 +- 0.0309 seconds time elapsed ( +- 0.98% ) $ After: $ perf stat -r5 perf bench internals inject-build-id > /dev/null Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 2,379.94 msec task-clock:u # 1.473 CPUs utilized ( +- 0.18% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 62,584 page-faults:u # 0.026 M/sec ( +- 0.07% ) 2,372,389,668 cycles:u # 0.997 GHz ( +- 0.29% ) (83.14%) 106,937,862 stalled-cycles-frontend:u # 4.51% frontend cycles idle ( +- 4.89% ) (83.20%) 581,697,915 stalled-cycles-backend:u # 24.52% backend cycles idle ( +- 0.71% ) (83.47%) 3,659,692,199 instructions:u # 1.54 insn per cycle # 0.16 stalled cycles per insn ( +- 0.10% ) (83.63%) 791,372,961 branches:u # 332.518 M/sec ( +- 0.27% ) (83.39%) 10,648,083 branch-misses:u # 1.35% of all branches ( +- 0.22% ) (83.16%) 1.61570 +- 0.00172 seconds time elapsed ( +- 0.11% ) $ Signed-off-by: Namhyung Kim <namhyung@kernel.org> Original-patch-by: Stephane Eranian <eranian@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201012070214.2074921-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-12 07:02:12 +00:00
#include <linux/err.h>
#include <subcmd/parse-options.h>
perf inject: Do not load map/dso when injecting build-id No need to load symbols in a DSO when injecting build-id. I guess the reason was to check the DSO is a special file like anon files. Use some helper functions in map.c to check them before reading build-id. Also pass sample event's cpumode to a new build-id event. It brought a speedup in the benchmark of 25 -> 21 msec on my laptop. Also the memory usage (Max RSS) went down by ~200 KB. # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 21.389 msec (+- 0.138 msec) Average time per event: 2.097 usec (+- 0.014 usec) Average memory usage: 8225 KB (+- 0 KB) Committer notes: Before: $ perf stat -r5 perf bench internals inject-build-id > /dev/null Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 4,020.56 msec task-clock:u # 1.271 CPUs utilized ( +- 0.74% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 123,354 page-faults:u # 0.031 M/sec ( +- 0.81% ) 7,119,951,568 cycles:u # 1.771 GHz ( +- 1.74% ) (83.27%) 230,086,969 stalled-cycles-frontend:u # 3.23% frontend cycles idle ( +- 1.97% ) (83.41%) 1,168,298,765 stalled-cycles-backend:u # 16.41% backend cycles idle ( +- 1.13% ) (83.44%) 11,173,083,669 instructions:u # 1.57 insn per cycle # 0.10 stalled cycles per insn ( +- 1.58% ) (83.31%) 2,413,908,936 branches:u # 600.392 M/sec ( +- 1.69% ) (83.26%) 46,576,289 branch-misses:u # 1.93% of all branches ( +- 2.20% ) (83.31%) 3.1638 +- 0.0309 seconds time elapsed ( +- 0.98% ) $ After: $ perf stat -r5 perf bench internals inject-build-id > /dev/null Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 2,379.94 msec task-clock:u # 1.473 CPUs utilized ( +- 0.18% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 62,584 page-faults:u # 0.026 M/sec ( +- 0.07% ) 2,372,389,668 cycles:u # 0.997 GHz ( +- 0.29% ) (83.14%) 106,937,862 stalled-cycles-frontend:u # 4.51% frontend cycles idle ( +- 4.89% ) (83.20%) 581,697,915 stalled-cycles-backend:u # 24.52% backend cycles idle ( +- 0.71% ) (83.47%) 3,659,692,199 instructions:u # 1.54 insn per cycle # 0.16 stalled cycles per insn ( +- 0.10% ) (83.63%) 791,372,961 branches:u # 332.518 M/sec ( +- 0.27% ) (83.39%) 10,648,083 branch-misses:u # 1.35% of all branches ( +- 0.22% ) (83.16%) 1.61570 +- 0.00172 seconds time elapsed ( +- 0.11% ) $ Signed-off-by: Namhyung Kim <namhyung@kernel.org> Original-patch-by: Stephane Eranian <eranian@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201012070214.2074921-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-12 07:02:12 +00:00
#include <uapi/linux/mman.h> /* To get things like MAP_HUGETLB even on older libc headers */
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
#include <linux/list.h>
#include <linux/string.h>
perf inject: Add support for injecting guest sideband events Inject events from a perf.data file recorded in a virtual machine into a perf.data file recorded on the host at the same time. Only side band events (e.g. mmap, comm, fork, exit etc) and build IDs are injected. Additionally, the guest kcore_dir is copied as kcore_dir__ appended to the machine PID. This is non-trivial because: o It is not possible to process 2 sessions simultaneously so instead events are first written to a temporary file. o To avoid conflict, guest sample IDs are replaced with new unused sample IDs. o Guest event's CPU is changed to be the host CPU because it is more useful for reporting and analysis. o Sample ID is mapped to machine PID which is recorded with VCPU in the id index. This is important to allow guest events to be related to the guest machine and VCPU. o Timestamps must be converted. o Events are inserted to obey finished-round ordering. The anticipated use-case is: - start recording sideband events in a guest machine - start recording an AUX area trace on the host which can trace also the guest (e.g. Intel PT) - run test case on the guest - stop recording on the host - stop recording on the guest - copy the guest perf.data file to the host - inject the guest perf.data file sideband events into the host perf.data file using perf inject - the resulting perf.data file can now be used Subsequent patches provide Intel PT support for this. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220711093218.10967-25-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-11 09:32:07 +00:00
#include <linux/zalloc.h>
#include <linux/hash.h>
perf inject: Add a command line option to specify build ids. This commit adds the option --known-build-ids to perf inject. It allows the user to explicitly specify the build id for a given path, instead of retrieving it from the current system. This is useful in cases where a perf.data file is processed on a different system from where it was collected, or if some of the binaries are no longer available. The build ids and paths are specified in pairs in the command line. Using the file:// specifier, build ids can be loaded from a file directly generated by perf buildid-list. This is convenient to copy build ids from one perf.data file to another. ** Example: In this example we use perf record to create two perf.data files, one with build ids and another without, and use perf buildid-list and perf inject to copy the build ids from the first file to the second. $ perf record ls /tmp $ perf record --no-buildid -o perf.data.no-buildid ls /tmp $ perf buildid-list > build-ids.txt $ perf inject -b --known-build-ids='file://build-ids.txt' \ -i perf.data.no-buildid -o perf.data.buildid Signed-off-by: Raul Silvera <rsilvera@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220815225922.2118745-1-rsilvera@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-15 22:59:22 +00:00
#include <ctype.h>
#include <errno.h>
#include <signal.h>
perf inject: Add support for injecting guest sideband events Inject events from a perf.data file recorded in a virtual machine into a perf.data file recorded on the host at the same time. Only side band events (e.g. mmap, comm, fork, exit etc) and build IDs are injected. Additionally, the guest kcore_dir is copied as kcore_dir__ appended to the machine PID. This is non-trivial because: o It is not possible to process 2 sessions simultaneously so instead events are first written to a temporary file. o To avoid conflict, guest sample IDs are replaced with new unused sample IDs. o Guest event's CPU is changed to be the host CPU because it is more useful for reporting and analysis. o Sample ID is mapped to machine PID which is recorded with VCPU in the id index. This is important to allow guest events to be related to the guest machine and VCPU. o Timestamps must be converted. o Events are inserted to obey finished-round ordering. The anticipated use-case is: - start recording sideband events in a guest machine - start recording an AUX area trace on the host which can trace also the guest (e.g. Intel PT) - run test case on the guest - stop recording on the host - stop recording on the guest - copy the guest perf.data file to the host - inject the guest perf.data file sideband events into the host perf.data file using perf inject - the resulting perf.data file can now be used Subsequent patches provide Intel PT support for this. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220711093218.10967-25-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-11 09:32:07 +00:00
#include <inttypes.h>
struct guest_event {
struct perf_sample sample;
union perf_event *event;
char event_buf[PERF_SAMPLE_MAX_SIZE];
};
struct guest_id {
/* hlist_node must be first, see free_hlist() */
struct hlist_node node;
u64 id;
u64 host_id;
u32 vcpu;
};
struct guest_tid {
/* hlist_node must be first, see free_hlist() */
struct hlist_node node;
/* Thread ID of QEMU thread */
u32 tid;
u32 vcpu;
};
struct guest_vcpu {
/* Current host CPU */
u32 cpu;
/* Thread ID of QEMU thread */
u32 tid;
};
struct guest_session {
char *perf_data_file;
u32 machine_pid;
u64 time_offset;
double time_scale;
struct perf_tool tool;
struct perf_data data;
struct perf_session *session;
char *tmp_file_name;
int tmp_fd;
struct perf_tsc_conversion host_tc;
struct perf_tsc_conversion guest_tc;
bool copy_kcore_dir;
bool have_tc;
bool fetched;
bool ready;
u16 dflt_id_hdr_size;
u64 dflt_id;
u64 highest_id;
/* Array of guest_vcpu */
struct guest_vcpu *vcpu;
size_t vcpu_cnt;
/* Hash table for guest_id */
struct hlist_head heads[PERF_EVLIST__HLIST_SIZE];
/* Hash table for guest_tid */
struct hlist_head tids[PERF_EVLIST__HLIST_SIZE];
/* Place to stash next guest event */
struct guest_event ev;
};
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
struct perf_inject {
struct perf_tool tool;
struct perf_session *session;
bool build_ids;
bool build_id_all;
bool sched_stat;
bool have_auxtrace;
bool strip;
perf inject: Add jitdump mmap injection support This patch adds a --jit/-j option to perf inject. This options injects MMAP records into the perf.data file to cover the jitted code mmaps. It also emits ELF images for each function in the jidump file. Those images are created where the jitdump file is. The MMAP records point to that location as well. Typical flow: $ perf record -k mono -- java -agentpath:libpjvmti.so java_class $ perf inject --jit -i perf.data -o perf.data.jitted $ perf report -i perf.data.jitted Note that jitdump.h support is not limited to Java, it works with any jitted environment modified to emit the jitdump file format, include those where code can be jitted multiple times and moved around. The jitdump.h format is adapted from the Oprofile project. The genelf.c (ELF binary generation) depends on MD5 hash encoding for the buildid. To enable this, libssl-dev must be installed. If not, then genelf.c defaults to using urandom to generate the buildid, which is not ideal. The Makefile auto-detects the presence on libssl-dev. This version mmaps the jitdump file to create a marker MMAP record in the perf.data file. The marker is used to detect jitdump and cause perf inject to inject the jitted mmaps and generate ELF images for jitted functions. In V8, the following fixes and changes were made among other things: - the jidump header format include a new flags field to be used to carry information about the configuration of the runtime agent. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix mmap pgoff: MMAP event pgoff must be the offset within the ELF file at which the code resides. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix ELF virtual addresses: perf tools expect the ELF virtual addresses of dynamic objects to match the file offset. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - JIT MMAP injection does not obey finished_round semantics. JIT MMAP injection injects all MMAP events in one go, so it does not obey finished_round semantics, so drop the finished_round events from the output perf.data file. Contributed by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carl Love <cel@us.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John McCutchan <johnmccutchan@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com [ Moved inject.build_ids ordering bits to a separate patch, fixed the NO_LIBELF=1 build ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-30 09:02:21 +00:00
bool jit_mode;
bool in_place_update;
bool in_place_update_dry_run;
bool is_pipe;
bool copy_kcore_dir;
const char *input_name;
struct perf_data output;
u64 bytes_written;
u64 aux_id;
struct list_head samples;
struct itrace_synth_opts itrace_synth_opts;
char event_copy[PERF_SAMPLE_MAX_SIZE];
perf inject: Keep some features sections from input file perf inject overwrites feature sections with information from the current machine. It makes more sense to keep original information that describes the machine or software when perf record was run. Example: perf.data from "Desktop" injected on "nuc11" Before: $ perf script --header-only -i perf.data-from-desktop | head -15 # ======== # captured on : Thu May 19 09:55:50 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : Desktop # os release : 5.13.0-41-generic # perf version : 5.18.rc5.gac837f7ca7ed # arch : x86_64 # nrcpus online : 28 # nrcpus avail : 28 # cpudesc : Intel(R) Core(TM) i9-9940X CPU @ 3.30GHz # cpuid : GenuineIntel,6,85,4 # total memory : 65548656 kB $ perf inject -i perf.data-from-desktop -o injected-perf.data $ perf script --header-only -i injected-perf.data | head -15 # ======== # captured on : Fri May 20 15:06:55 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : nuc11 # os release : 5.17.5-local # perf version : 5.18.rc5.g0f828fdeb9af # arch : x86_64 # nrcpus online : 8 # nrcpus avail : 8 # cpudesc : 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz # cpuid : GenuineIntel,6,140,1 # total memory : 16012124 kB After: $ perf inject -i perf.data-from-desktop -o injected-perf.data $ perf script --header-only -i injected-perf.data | head -15 # ======== # captured on : Fri May 20 15:08:54 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : Desktop # os release : 5.13.0-41-generic # perf version : 5.18.rc5.gac837f7ca7ed # arch : x86_64 # nrcpus online : 28 # nrcpus avail : 28 # cpudesc : Intel(R) Core(TM) i9-9940X CPU @ 3.30GHz # cpuid : GenuineIntel,6,85,4 # total memory : 65548656 kB Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220520132404.25853-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-05-20 13:24:02 +00:00
struct perf_file_section secs[HEADER_FEAT_BITS];
perf inject: Add support for injecting guest sideband events Inject events from a perf.data file recorded in a virtual machine into a perf.data file recorded on the host at the same time. Only side band events (e.g. mmap, comm, fork, exit etc) and build IDs are injected. Additionally, the guest kcore_dir is copied as kcore_dir__ appended to the machine PID. This is non-trivial because: o It is not possible to process 2 sessions simultaneously so instead events are first written to a temporary file. o To avoid conflict, guest sample IDs are replaced with new unused sample IDs. o Guest event's CPU is changed to be the host CPU because it is more useful for reporting and analysis. o Sample ID is mapped to machine PID which is recorded with VCPU in the id index. This is important to allow guest events to be related to the guest machine and VCPU. o Timestamps must be converted. o Events are inserted to obey finished-round ordering. The anticipated use-case is: - start recording sideband events in a guest machine - start recording an AUX area trace on the host which can trace also the guest (e.g. Intel PT) - run test case on the guest - stop recording on the host - stop recording on the guest - copy the guest perf.data file to the host - inject the guest perf.data file sideband events into the host perf.data file using perf inject - the resulting perf.data file can now be used Subsequent patches provide Intel PT support for this. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220711093218.10967-25-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-11 09:32:07 +00:00
struct guest_session guest_session;
perf inject: Add a command line option to specify build ids. This commit adds the option --known-build-ids to perf inject. It allows the user to explicitly specify the build id for a given path, instead of retrieving it from the current system. This is useful in cases where a perf.data file is processed on a different system from where it was collected, or if some of the binaries are no longer available. The build ids and paths are specified in pairs in the command line. Using the file:// specifier, build ids can be loaded from a file directly generated by perf buildid-list. This is convenient to copy build ids from one perf.data file to another. ** Example: In this example we use perf record to create two perf.data files, one with build ids and another without, and use perf buildid-list and perf inject to copy the build ids from the first file to the second. $ perf record ls /tmp $ perf record --no-buildid -o perf.data.no-buildid ls /tmp $ perf buildid-list > build-ids.txt $ perf inject -b --known-build-ids='file://build-ids.txt' \ -i perf.data.no-buildid -o perf.data.buildid Signed-off-by: Raul Silvera <rsilvera@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220815225922.2118745-1-rsilvera@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-15 22:59:22 +00:00
struct strlist *known_build_ids;
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
};
struct event_entry {
struct list_head node;
u32 tid;
perf tools: Replace zero-length array with flexible-array The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200515172926.GA31976@embeddedor Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-15 17:29:26 +00:00
union perf_event event[];
};
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
static int dso__inject_build_id(struct dso *dso, struct perf_tool *tool,
struct machine *machine, u8 cpumode, u32 flags);
static int output_bytes(struct perf_inject *inject, void *buf, size_t sz)
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
{
ssize_t size;
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
size = perf_data__write(&inject->output, buf, sz);
if (size < 0)
return -errno;
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
inject->bytes_written += size;
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
return 0;
}
static int perf_event__repipe_synth(struct perf_tool *tool,
union perf_event *event)
{
struct perf_inject *inject = container_of(tool, struct perf_inject,
tool);
return output_bytes(inject, event, event->header.size);
}
static int perf_event__repipe_oe_synth(struct perf_tool *tool,
union perf_event *event,
struct ordered_events *oe __maybe_unused)
{
return perf_event__repipe_synth(tool, event);
}
#ifdef HAVE_JITDUMP
perf inject: Add jitdump mmap injection support This patch adds a --jit/-j option to perf inject. This options injects MMAP records into the perf.data file to cover the jitted code mmaps. It also emits ELF images for each function in the jidump file. Those images are created where the jitdump file is. The MMAP records point to that location as well. Typical flow: $ perf record -k mono -- java -agentpath:libpjvmti.so java_class $ perf inject --jit -i perf.data -o perf.data.jitted $ perf report -i perf.data.jitted Note that jitdump.h support is not limited to Java, it works with any jitted environment modified to emit the jitdump file format, include those where code can be jitted multiple times and moved around. The jitdump.h format is adapted from the Oprofile project. The genelf.c (ELF binary generation) depends on MD5 hash encoding for the buildid. To enable this, libssl-dev must be installed. If not, then genelf.c defaults to using urandom to generate the buildid, which is not ideal. The Makefile auto-detects the presence on libssl-dev. This version mmaps the jitdump file to create a marker MMAP record in the perf.data file. The marker is used to detect jitdump and cause perf inject to inject the jitted mmaps and generate ELF images for jitted functions. In V8, the following fixes and changes were made among other things: - the jidump header format include a new flags field to be used to carry information about the configuration of the runtime agent. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix mmap pgoff: MMAP event pgoff must be the offset within the ELF file at which the code resides. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix ELF virtual addresses: perf tools expect the ELF virtual addresses of dynamic objects to match the file offset. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - JIT MMAP injection does not obey finished_round semantics. JIT MMAP injection injects all MMAP events in one go, so it does not obey finished_round semantics, so drop the finished_round events from the output perf.data file. Contributed by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carl Love <cel@us.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John McCutchan <johnmccutchan@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com [ Moved inject.build_ids ordering bits to a separate patch, fixed the NO_LIBELF=1 build ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-30 09:02:21 +00:00
static int perf_event__drop_oe(struct perf_tool *tool __maybe_unused,
union perf_event *event __maybe_unused,
struct ordered_events *oe __maybe_unused)
{
return 0;
}
#endif
static int perf_event__repipe_op2_synth(struct perf_session *session,
union perf_event *event)
{
return perf_event__repipe_synth(session->tool, event);
}
static int perf_event__repipe_op4_synth(struct perf_session *session,
union perf_event *event,
u64 data __maybe_unused,
const char *str __maybe_unused)
{
return perf_event__repipe_synth(session->tool, event);
}
static int perf_event__repipe_attr(struct perf_tool *tool,
union perf_event *event,
struct evlist **pevlist)
{
struct perf_inject *inject = container_of(tool, struct perf_inject,
tool);
int ret;
ret = perf_event__process_attr(tool, event, pevlist);
if (ret)
return ret;
if (!inject->is_pipe)
return 0;
return perf_event__repipe_synth(tool, event);
}
static int perf_event__repipe_event_update(struct perf_tool *tool,
union perf_event *event,
struct evlist **pevlist __maybe_unused)
{
return perf_event__repipe_synth(tool, event);
}
#ifdef HAVE_AUXTRACE_SUPPORT
static int copy_bytes(struct perf_inject *inject, struct perf_data *data, off_t size)
{
char buf[4096];
ssize_t ssz;
int ret;
while (size > 0) {
ssz = perf_data__read(data, buf, min(size, (off_t)sizeof(buf)));
if (ssz < 0)
return -errno;
ret = output_bytes(inject, buf, ssz);
if (ret)
return ret;
size -= ssz;
}
return 0;
}
static s64 perf_event__repipe_auxtrace(struct perf_session *session,
union perf_event *event)
{
struct perf_tool *tool = session->tool;
struct perf_inject *inject = container_of(tool, struct perf_inject,
tool);
int ret;
inject->have_auxtrace = true;
if (!inject->output.is_pipe) {
off_t offset;
offset = lseek(inject->output.file.fd, 0, SEEK_CUR);
if (offset == -1)
return -errno;
ret = auxtrace_index__auxtrace_event(&session->auxtrace_index,
event, offset);
if (ret < 0)
return ret;
}
if (perf_data__is_pipe(session->data) || !session->one_mmap) {
ret = output_bytes(inject, event, event->header.size);
if (ret < 0)
return ret;
ret = copy_bytes(inject, session->data,
event->auxtrace.size);
} else {
ret = output_bytes(inject, event,
event->header.size + event->auxtrace.size);
}
if (ret < 0)
return ret;
return event->auxtrace.size;
}
#else
static s64
perf_event__repipe_auxtrace(struct perf_session *session __maybe_unused,
union perf_event *event __maybe_unused)
{
pr_err("AUX area tracing not supported\n");
return -EINVAL;
}
#endif
static int perf_event__repipe(struct perf_tool *tool,
union perf_event *event,
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-10 22:15:03 +00:00
struct perf_sample *sample __maybe_unused,
struct machine *machine __maybe_unused)
{
return perf_event__repipe_synth(tool, event);
}
static int perf_event__drop(struct perf_tool *tool __maybe_unused,
union perf_event *event __maybe_unused,
struct perf_sample *sample __maybe_unused,
struct machine *machine __maybe_unused)
{
return 0;
}
static int perf_event__drop_aux(struct perf_tool *tool,
union perf_event *event __maybe_unused,
struct perf_sample *sample,
struct machine *machine __maybe_unused)
{
struct perf_inject *inject = container_of(tool, struct perf_inject, tool);
if (!inject->aux_id)
inject->aux_id = sample->id;
return 0;
}
static union perf_event *
perf_inject__cut_auxtrace_sample(struct perf_inject *inject,
union perf_event *event,
struct perf_sample *sample)
{
size_t sz1 = sample->aux_sample.data - (void *)event;
size_t sz2 = event->header.size - sample->aux_sample.size - sz1;
union perf_event *ev = (union perf_event *)inject->event_copy;
if (sz1 > event->header.size || sz2 > event->header.size ||
sz1 + sz2 > event->header.size ||
sz1 < sizeof(struct perf_event_header) + sizeof(u64))
return event;
memcpy(ev, event, sz1);
memcpy((void *)ev + sz1, (void *)event + event->header.size - sz2, sz2);
ev->header.size = sz1 + sz2;
((u64 *)((void *)ev + sz1))[-1] = 0;
return ev;
}
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
typedef int (*inject_handler)(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct evsel *evsel,
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
struct machine *machine);
static int perf_event__repipe_sample(struct perf_tool *tool,
union perf_event *event,
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
struct perf_sample *sample,
struct evsel *evsel,
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
struct machine *machine)
{
struct perf_inject *inject = container_of(tool, struct perf_inject,
tool);
if (evsel && evsel->handler) {
inject_handler f = evsel->handler;
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
return f(tool, event, sample, evsel, machine);
}
build_id__mark_dso_hit(tool, event, sample, evsel, machine);
if (inject->itrace_synth_opts.set && sample->aux_sample.size)
event = perf_inject__cut_auxtrace_sample(inject, event, sample);
return perf_event__repipe_synth(tool, event);
}
static int perf_event__repipe_mmap(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct machine *machine)
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
{
int err;
err = perf_event__process_mmap(tool, event, sample, machine);
perf_event__repipe(tool, event, sample, machine);
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
return err;
}
#ifdef HAVE_JITDUMP
perf inject: Add jitdump mmap injection support This patch adds a --jit/-j option to perf inject. This options injects MMAP records into the perf.data file to cover the jitted code mmaps. It also emits ELF images for each function in the jidump file. Those images are created where the jitdump file is. The MMAP records point to that location as well. Typical flow: $ perf record -k mono -- java -agentpath:libpjvmti.so java_class $ perf inject --jit -i perf.data -o perf.data.jitted $ perf report -i perf.data.jitted Note that jitdump.h support is not limited to Java, it works with any jitted environment modified to emit the jitdump file format, include those where code can be jitted multiple times and moved around. The jitdump.h format is adapted from the Oprofile project. The genelf.c (ELF binary generation) depends on MD5 hash encoding for the buildid. To enable this, libssl-dev must be installed. If not, then genelf.c defaults to using urandom to generate the buildid, which is not ideal. The Makefile auto-detects the presence on libssl-dev. This version mmaps the jitdump file to create a marker MMAP record in the perf.data file. The marker is used to detect jitdump and cause perf inject to inject the jitted mmaps and generate ELF images for jitted functions. In V8, the following fixes and changes were made among other things: - the jidump header format include a new flags field to be used to carry information about the configuration of the runtime agent. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix mmap pgoff: MMAP event pgoff must be the offset within the ELF file at which the code resides. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix ELF virtual addresses: perf tools expect the ELF virtual addresses of dynamic objects to match the file offset. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - JIT MMAP injection does not obey finished_round semantics. JIT MMAP injection injects all MMAP events in one go, so it does not obey finished_round semantics, so drop the finished_round events from the output perf.data file. Contributed by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carl Love <cel@us.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John McCutchan <johnmccutchan@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com [ Moved inject.build_ids ordering bits to a separate patch, fixed the NO_LIBELF=1 build ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-30 09:02:21 +00:00
static int perf_event__jit_repipe_mmap(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct machine *machine)
{
struct perf_inject *inject = container_of(tool, struct perf_inject, tool);
u64 n = 0;
int ret;
perf inject: Add jitdump mmap injection support This patch adds a --jit/-j option to perf inject. This options injects MMAP records into the perf.data file to cover the jitted code mmaps. It also emits ELF images for each function in the jidump file. Those images are created where the jitdump file is. The MMAP records point to that location as well. Typical flow: $ perf record -k mono -- java -agentpath:libpjvmti.so java_class $ perf inject --jit -i perf.data -o perf.data.jitted $ perf report -i perf.data.jitted Note that jitdump.h support is not limited to Java, it works with any jitted environment modified to emit the jitdump file format, include those where code can be jitted multiple times and moved around. The jitdump.h format is adapted from the Oprofile project. The genelf.c (ELF binary generation) depends on MD5 hash encoding for the buildid. To enable this, libssl-dev must be installed. If not, then genelf.c defaults to using urandom to generate the buildid, which is not ideal. The Makefile auto-detects the presence on libssl-dev. This version mmaps the jitdump file to create a marker MMAP record in the perf.data file. The marker is used to detect jitdump and cause perf inject to inject the jitted mmaps and generate ELF images for jitted functions. In V8, the following fixes and changes were made among other things: - the jidump header format include a new flags field to be used to carry information about the configuration of the runtime agent. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix mmap pgoff: MMAP event pgoff must be the offset within the ELF file at which the code resides. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix ELF virtual addresses: perf tools expect the ELF virtual addresses of dynamic objects to match the file offset. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - JIT MMAP injection does not obey finished_round semantics. JIT MMAP injection injects all MMAP events in one go, so it does not obey finished_round semantics, so drop the finished_round events from the output perf.data file. Contributed by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carl Love <cel@us.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John McCutchan <johnmccutchan@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com [ Moved inject.build_ids ordering bits to a separate patch, fixed the NO_LIBELF=1 build ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-30 09:02:21 +00:00
/*
* if jit marker, then inject jit mmaps and generate ELF images
*/
ret = jit_process(inject->session, &inject->output, machine,
perf inject jit: Add namespaces support This patch fixes "perf inject --jit" to properly operate on namespaced/containerized processes: * jitdump files are generated by the process, thus they should be looked up in its mount NS. * DSOs of injected MMAP events will later be looked up in the process mount NS, so write them into its NS. * PIDs & TIDs from jitdump events need to be translated to the PID as seen by "perf record" before written into MMAP events. For a process in a different PID NS, the TID & PID given in the jitdump event are actually ignored; I use the TID & PID of the thread which mmap()ed the jitdump file. This is simplified and won't do for forks of the initial process, if they continue using the same jitdump file. Future patches might improve it. This was tested by recording a NodeJS process running with "--perf-prof", inside a Docker container, and by recording another NodeJS process running in the same namespaces as perf itself, to make sure it's not broken for non-containerized processes. Signed-off-by: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20201105015604.1726943-1-yonatan.goldschmidt@granulate.io Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-05 01:56:04 +00:00
event->mmap.filename, event->mmap.pid, event->mmap.tid, &n);
if (ret < 0)
return ret;
if (ret) {
perf inject: Add jitdump mmap injection support This patch adds a --jit/-j option to perf inject. This options injects MMAP records into the perf.data file to cover the jitted code mmaps. It also emits ELF images for each function in the jidump file. Those images are created where the jitdump file is. The MMAP records point to that location as well. Typical flow: $ perf record -k mono -- java -agentpath:libpjvmti.so java_class $ perf inject --jit -i perf.data -o perf.data.jitted $ perf report -i perf.data.jitted Note that jitdump.h support is not limited to Java, it works with any jitted environment modified to emit the jitdump file format, include those where code can be jitted multiple times and moved around. The jitdump.h format is adapted from the Oprofile project. The genelf.c (ELF binary generation) depends on MD5 hash encoding for the buildid. To enable this, libssl-dev must be installed. If not, then genelf.c defaults to using urandom to generate the buildid, which is not ideal. The Makefile auto-detects the presence on libssl-dev. This version mmaps the jitdump file to create a marker MMAP record in the perf.data file. The marker is used to detect jitdump and cause perf inject to inject the jitted mmaps and generate ELF images for jitted functions. In V8, the following fixes and changes were made among other things: - the jidump header format include a new flags field to be used to carry information about the configuration of the runtime agent. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix mmap pgoff: MMAP event pgoff must be the offset within the ELF file at which the code resides. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix ELF virtual addresses: perf tools expect the ELF virtual addresses of dynamic objects to match the file offset. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - JIT MMAP injection does not obey finished_round semantics. JIT MMAP injection injects all MMAP events in one go, so it does not obey finished_round semantics, so drop the finished_round events from the output perf.data file. Contributed by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carl Love <cel@us.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John McCutchan <johnmccutchan@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com [ Moved inject.build_ids ordering bits to a separate patch, fixed the NO_LIBELF=1 build ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-30 09:02:21 +00:00
inject->bytes_written += n;
return 0;
}
return perf_event__repipe_mmap(tool, event, sample, machine);
}
#endif
static struct dso *findnew_dso(int pid, int tid, const char *filename,
struct dso_id *id, struct machine *machine)
{
struct thread *thread;
struct nsinfo *nsi = NULL;
struct nsinfo *nnsi;
struct dso *dso;
bool vdso;
thread = machine__findnew_thread(machine, pid, tid);
if (thread == NULL) {
pr_err("cannot find or create a task %d/%d.\n", tid, pid);
return NULL;
}
vdso = is_vdso_map(filename);
nsi = nsinfo__get(thread->nsinfo);
if (vdso) {
/* The vdso maps are always on the host and not the
* container. Ensure that we don't use setns to look
* them up.
*/
nnsi = nsinfo__copy(nsi);
if (nnsi) {
nsinfo__put(nsi);
perf namespaces: Add functions to access nsinfo Having functions to access nsinfo reduces the places where reference counting checking needs to be added. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: André Almeida <andrealmeid@collabora.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: German Gomez <german.gomez@arm.com> Cc: Hao Luo <haoluo@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Miaoqian Lin <linmq006@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Song Liu <song@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yury Norov <yury.norov@gmail.com> Link: http://lore.kernel.org/lkml/20220211103415.2737789-14-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-11 10:34:06 +00:00
nsinfo__clear_need_setns(nnsi);
nsi = nnsi;
}
dso = machine__findnew_vdso(machine, thread);
} else {
dso = machine__findnew_dso_id(machine, filename, id);
}
if (dso) {
perf dso: Hold lock when accessing nsinfo There may be threads racing to update dso->nsinfo: https://lore.kernel.org/linux-perf-users/CAP-5=fWZH20L4kv-BwVtGLwR=Em3AOOT+Q4QGivvQuYn5AsPRg@mail.gmail.com/ Holding the dso->lock avoids use-after-free, memory leaks and other such bugs. Apply the fix in: https://lore.kernel.org/linux-perf-users/20211118193714.2293728-1-irogers@google.com/ of there being a missing nsinfo__put now that the accesses are data race free. Fixes test "Lookup mmap thread" when compiled with address sanitizer. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Truong <alexandre.truong@arm.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andres Freund <andres@anarazel.de> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: André Almeida <andrealmeid@igalia.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Colin Ian King <colin.king@intel.com> Cc: Dario Petrillo <dario.pk1@gmail.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Dave Marchevsky <davemarchevsky@fb.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Fangrui Song <maskray@google.com> Cc: Hewenliang <hewenliang4@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jason Wang <wangborong@cdjrlc.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Pavithra Gurushankar <gpavithrasha@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Remi Bernon <rbernon@codeweavers.com> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Tom Rix <trix@redhat.com> Cc: Weiguo Li <liwg06@foxmail.com> Cc: Wenyu Liu <liuwenyu7@huawei.com> Cc: William Cohen <wcohen@redhat.com> Cc: Zechuan Chen <chenzechuan1@huawei.com> Cc: bpf@vger.kernel.org Cc: llvm@lists.linux.dev Cc: yaowenbin <yaowenbin1@huawei.com> Link: https://lore.kernel.org/r/20220826164242.43412-15-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-26 16:42:38 +00:00
mutex_lock(&dso->lock);
nsinfo__put(dso->nsinfo);
dso->nsinfo = nsi;
perf dso: Hold lock when accessing nsinfo There may be threads racing to update dso->nsinfo: https://lore.kernel.org/linux-perf-users/CAP-5=fWZH20L4kv-BwVtGLwR=Em3AOOT+Q4QGivvQuYn5AsPRg@mail.gmail.com/ Holding the dso->lock avoids use-after-free, memory leaks and other such bugs. Apply the fix in: https://lore.kernel.org/linux-perf-users/20211118193714.2293728-1-irogers@google.com/ of there being a missing nsinfo__put now that the accesses are data race free. Fixes test "Lookup mmap thread" when compiled with address sanitizer. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Truong <alexandre.truong@arm.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andres Freund <andres@anarazel.de> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: André Almeida <andrealmeid@igalia.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Colin Ian King <colin.king@intel.com> Cc: Dario Petrillo <dario.pk1@gmail.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Dave Marchevsky <davemarchevsky@fb.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Fangrui Song <maskray@google.com> Cc: Hewenliang <hewenliang4@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jason Wang <wangborong@cdjrlc.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Pavithra Gurushankar <gpavithrasha@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Remi Bernon <rbernon@codeweavers.com> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Tom Rix <trix@redhat.com> Cc: Weiguo Li <liwg06@foxmail.com> Cc: Wenyu Liu <liuwenyu7@huawei.com> Cc: William Cohen <wcohen@redhat.com> Cc: Zechuan Chen <chenzechuan1@huawei.com> Cc: bpf@vger.kernel.org Cc: llvm@lists.linux.dev Cc: yaowenbin <yaowenbin1@huawei.com> Link: https://lore.kernel.org/r/20220826164242.43412-15-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-26 16:42:38 +00:00
mutex_unlock(&dso->lock);
} else
nsinfo__put(nsi);
thread__put(thread);
return dso;
}
static int perf_event__repipe_buildid_mmap(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct machine *machine)
{
struct dso *dso;
dso = findnew_dso(event->mmap.pid, event->mmap.tid,
event->mmap.filename, NULL, machine);
if (dso && !dso->hit) {
dso->hit = 1;
dso__inject_build_id(dso, tool, machine, sample->cpumode, 0);
}
dso__put(dso);
return perf_event__repipe(tool, event, sample, machine);
}
static int perf_event__repipe_mmap2(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct machine *machine)
{
int err;
err = perf_event__process_mmap2(tool, event, sample, machine);
perf_event__repipe(tool, event, sample, machine);
if (event->header.misc & PERF_RECORD_MISC_MMAP_BUILD_ID) {
struct dso *dso;
dso = findnew_dso(event->mmap2.pid, event->mmap2.tid,
event->mmap2.filename, NULL, machine);
if (dso) {
/* mark it not to inject build-id */
dso->hit = 1;
}
dso__put(dso);
}
return err;
}
#ifdef HAVE_JITDUMP
perf inject: Add jitdump mmap injection support This patch adds a --jit/-j option to perf inject. This options injects MMAP records into the perf.data file to cover the jitted code mmaps. It also emits ELF images for each function in the jidump file. Those images are created where the jitdump file is. The MMAP records point to that location as well. Typical flow: $ perf record -k mono -- java -agentpath:libpjvmti.so java_class $ perf inject --jit -i perf.data -o perf.data.jitted $ perf report -i perf.data.jitted Note that jitdump.h support is not limited to Java, it works with any jitted environment modified to emit the jitdump file format, include those where code can be jitted multiple times and moved around. The jitdump.h format is adapted from the Oprofile project. The genelf.c (ELF binary generation) depends on MD5 hash encoding for the buildid. To enable this, libssl-dev must be installed. If not, then genelf.c defaults to using urandom to generate the buildid, which is not ideal. The Makefile auto-detects the presence on libssl-dev. This version mmaps the jitdump file to create a marker MMAP record in the perf.data file. The marker is used to detect jitdump and cause perf inject to inject the jitted mmaps and generate ELF images for jitted functions. In V8, the following fixes and changes were made among other things: - the jidump header format include a new flags field to be used to carry information about the configuration of the runtime agent. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix mmap pgoff: MMAP event pgoff must be the offset within the ELF file at which the code resides. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix ELF virtual addresses: perf tools expect the ELF virtual addresses of dynamic objects to match the file offset. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - JIT MMAP injection does not obey finished_round semantics. JIT MMAP injection injects all MMAP events in one go, so it does not obey finished_round semantics, so drop the finished_round events from the output perf.data file. Contributed by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carl Love <cel@us.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John McCutchan <johnmccutchan@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com [ Moved inject.build_ids ordering bits to a separate patch, fixed the NO_LIBELF=1 build ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-30 09:02:21 +00:00
static int perf_event__jit_repipe_mmap2(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct machine *machine)
{
struct perf_inject *inject = container_of(tool, struct perf_inject, tool);
u64 n = 0;
int ret;
perf inject: Add jitdump mmap injection support This patch adds a --jit/-j option to perf inject. This options injects MMAP records into the perf.data file to cover the jitted code mmaps. It also emits ELF images for each function in the jidump file. Those images are created where the jitdump file is. The MMAP records point to that location as well. Typical flow: $ perf record -k mono -- java -agentpath:libpjvmti.so java_class $ perf inject --jit -i perf.data -o perf.data.jitted $ perf report -i perf.data.jitted Note that jitdump.h support is not limited to Java, it works with any jitted environment modified to emit the jitdump file format, include those where code can be jitted multiple times and moved around. The jitdump.h format is adapted from the Oprofile project. The genelf.c (ELF binary generation) depends on MD5 hash encoding for the buildid. To enable this, libssl-dev must be installed. If not, then genelf.c defaults to using urandom to generate the buildid, which is not ideal. The Makefile auto-detects the presence on libssl-dev. This version mmaps the jitdump file to create a marker MMAP record in the perf.data file. The marker is used to detect jitdump and cause perf inject to inject the jitted mmaps and generate ELF images for jitted functions. In V8, the following fixes and changes were made among other things: - the jidump header format include a new flags field to be used to carry information about the configuration of the runtime agent. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix mmap pgoff: MMAP event pgoff must be the offset within the ELF file at which the code resides. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix ELF virtual addresses: perf tools expect the ELF virtual addresses of dynamic objects to match the file offset. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - JIT MMAP injection does not obey finished_round semantics. JIT MMAP injection injects all MMAP events in one go, so it does not obey finished_round semantics, so drop the finished_round events from the output perf.data file. Contributed by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carl Love <cel@us.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John McCutchan <johnmccutchan@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com [ Moved inject.build_ids ordering bits to a separate patch, fixed the NO_LIBELF=1 build ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-30 09:02:21 +00:00
/*
* if jit marker, then inject jit mmaps and generate ELF images
*/
ret = jit_process(inject->session, &inject->output, machine,
perf inject jit: Add namespaces support This patch fixes "perf inject --jit" to properly operate on namespaced/containerized processes: * jitdump files are generated by the process, thus they should be looked up in its mount NS. * DSOs of injected MMAP events will later be looked up in the process mount NS, so write them into its NS. * PIDs & TIDs from jitdump events need to be translated to the PID as seen by "perf record" before written into MMAP events. For a process in a different PID NS, the TID & PID given in the jitdump event are actually ignored; I use the TID & PID of the thread which mmap()ed the jitdump file. This is simplified and won't do for forks of the initial process, if they continue using the same jitdump file. Future patches might improve it. This was tested by recording a NodeJS process running with "--perf-prof", inside a Docker container, and by recording another NodeJS process running in the same namespaces as perf itself, to make sure it's not broken for non-containerized processes. Signed-off-by: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20201105015604.1726943-1-yonatan.goldschmidt@granulate.io Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-05 01:56:04 +00:00
event->mmap2.filename, event->mmap2.pid, event->mmap2.tid, &n);
if (ret < 0)
return ret;
if (ret) {
perf inject: Add jitdump mmap injection support This patch adds a --jit/-j option to perf inject. This options injects MMAP records into the perf.data file to cover the jitted code mmaps. It also emits ELF images for each function in the jidump file. Those images are created where the jitdump file is. The MMAP records point to that location as well. Typical flow: $ perf record -k mono -- java -agentpath:libpjvmti.so java_class $ perf inject --jit -i perf.data -o perf.data.jitted $ perf report -i perf.data.jitted Note that jitdump.h support is not limited to Java, it works with any jitted environment modified to emit the jitdump file format, include those where code can be jitted multiple times and moved around. The jitdump.h format is adapted from the Oprofile project. The genelf.c (ELF binary generation) depends on MD5 hash encoding for the buildid. To enable this, libssl-dev must be installed. If not, then genelf.c defaults to using urandom to generate the buildid, which is not ideal. The Makefile auto-detects the presence on libssl-dev. This version mmaps the jitdump file to create a marker MMAP record in the perf.data file. The marker is used to detect jitdump and cause perf inject to inject the jitted mmaps and generate ELF images for jitted functions. In V8, the following fixes and changes were made among other things: - the jidump header format include a new flags field to be used to carry information about the configuration of the runtime agent. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix mmap pgoff: MMAP event pgoff must be the offset within the ELF file at which the code resides. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix ELF virtual addresses: perf tools expect the ELF virtual addresses of dynamic objects to match the file offset. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - JIT MMAP injection does not obey finished_round semantics. JIT MMAP injection injects all MMAP events in one go, so it does not obey finished_round semantics, so drop the finished_round events from the output perf.data file. Contributed by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carl Love <cel@us.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John McCutchan <johnmccutchan@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com [ Moved inject.build_ids ordering bits to a separate patch, fixed the NO_LIBELF=1 build ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-30 09:02:21 +00:00
inject->bytes_written += n;
return 0;
}
return perf_event__repipe_mmap2(tool, event, sample, machine);
}
#endif
static int perf_event__repipe_buildid_mmap2(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct machine *machine)
{
struct dso_id dso_id = {
.maj = event->mmap2.maj,
.min = event->mmap2.min,
.ino = event->mmap2.ino,
.ino_generation = event->mmap2.ino_generation,
};
struct dso *dso;
if (event->header.misc & PERF_RECORD_MISC_MMAP_BUILD_ID) {
/* cannot use dso_id since it'd have invalid info */
dso = findnew_dso(event->mmap2.pid, event->mmap2.tid,
event->mmap2.filename, NULL, machine);
if (dso) {
/* mark it not to inject build-id */
dso->hit = 1;
}
dso__put(dso);
perf inject: Fix --buildid-all not to eat up MMAP2 When MMAP2 has the PERF_RECORD_MISC_MMAP_BUILD_ID flag, it means the record already has the build-id info. So it marks the DSO as hit, to skip if the same DSO is not processed if it happens to miss the build-id later. But it missed to copy the MMAP2 record itself so it'd fail to symbolize samples for those regions. For example, the following generates 249 MMAP2 events. $ perf record --buildid-mmap -o- true | perf report --stat -i- | grep MMAP2 MMAP2 events: 249 (86.8%) Adding perf inject should not change the number of events like this $ perf record --buildid-mmap -o- true | perf inject -b | \ > perf report --stat -i- | grep MMAP2 MMAP2 events: 249 (86.5%) But when --buildid-all is used, it eats most of the MMAP2 events. $ perf record --buildid-mmap -o- true | perf inject -b --buildid-all | \ > perf report --stat -i- | grep MMAP2 MMAP2 events: 1 ( 2.5%) With this patch, it shows the original number now. $ perf record --buildid-mmap -o- true | perf inject -b --buildid-all | \ > perf report --stat -i- | grep MMAP2 MMAP2 events: 249 (86.5%) Committer testing: Before: $ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf inject -b | perf report --stat -i- | grep MMAP2 MMAP2 events: 58 (36.2%) $ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf report --stat -i- | grep MMAP2 MMAP2 events: 58 (36.2%) $ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf inject -b --buildid-all | perf report --stat -i- | grep MMAP2 MMAP2 events: 2 ( 1.9%) $ After: $ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf inject -b | perf report --stat -i- | grep MMAP2 MMAP2 events: 58 (29.3%) $ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf report --stat -i- | grep MMAP2 MMAP2 events: 58 (34.3%) $ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf inject -b --buildid-all | perf report --stat -i- | grep MMAP2 MMAP2 events: 58 (38.4%) $ Fixes: f7fc0d1c915a74ff ("perf inject: Do not inject BUILD_ID record if MMAP2 has it") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230223070155.54251-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-23 07:01:55 +00:00
perf_event__repipe(tool, event, sample, machine);
return 0;
}
dso = findnew_dso(event->mmap2.pid, event->mmap2.tid,
event->mmap2.filename, &dso_id, machine);
if (dso && !dso->hit) {
dso->hit = 1;
dso__inject_build_id(dso, tool, machine, sample->cpumode,
event->mmap2.flags);
}
dso__put(dso);
perf_event__repipe(tool, event, sample, machine);
return 0;
}
static int perf_event__repipe_fork(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct machine *machine)
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
{
int err;
err = perf_event__process_fork(tool, event, sample, machine);
perf_event__repipe(tool, event, sample, machine);
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
return err;
}
static int perf_event__repipe_comm(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct machine *machine)
{
int err;
err = perf_event__process_comm(tool, event, sample, machine);
perf_event__repipe(tool, event, sample, machine);
return err;
}
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-07 20:41:43 +00:00
static int perf_event__repipe_namespaces(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct machine *machine)
{
int err = perf_event__process_namespaces(tool, event, sample, machine);
perf_event__repipe(tool, event, sample, machine);
return err;
}
static int perf_event__repipe_exit(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct machine *machine)
{
int err;
err = perf_event__process_exit(tool, event, sample, machine);
perf_event__repipe(tool, event, sample, machine);
return err;
}
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 22:59:39 +00:00
#ifdef HAVE_LIBTRACEEVENT
static int perf_event__repipe_tracing_data(struct perf_session *session,
union perf_event *event)
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
{
perf_event__repipe_synth(session->tool, event);
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
return perf_event__process_tracing_data(session, event);
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
}
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 22:59:39 +00:00
#endif
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
static int dso__read_build_id(struct dso *dso)
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
{
struct nscookie nsc;
if (dso->has_build_id)
return 0;
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
perf dso: Hold lock when accessing nsinfo There may be threads racing to update dso->nsinfo: https://lore.kernel.org/linux-perf-users/CAP-5=fWZH20L4kv-BwVtGLwR=Em3AOOT+Q4QGivvQuYn5AsPRg@mail.gmail.com/ Holding the dso->lock avoids use-after-free, memory leaks and other such bugs. Apply the fix in: https://lore.kernel.org/linux-perf-users/20211118193714.2293728-1-irogers@google.com/ of there being a missing nsinfo__put now that the accesses are data race free. Fixes test "Lookup mmap thread" when compiled with address sanitizer. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Truong <alexandre.truong@arm.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andres Freund <andres@anarazel.de> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: André Almeida <andrealmeid@igalia.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Colin Ian King <colin.king@intel.com> Cc: Dario Petrillo <dario.pk1@gmail.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Dave Marchevsky <davemarchevsky@fb.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Fangrui Song <maskray@google.com> Cc: Hewenliang <hewenliang4@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jason Wang <wangborong@cdjrlc.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Pavithra Gurushankar <gpavithrasha@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Remi Bernon <rbernon@codeweavers.com> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Tom Rix <trix@redhat.com> Cc: Weiguo Li <liwg06@foxmail.com> Cc: Wenyu Liu <liuwenyu7@huawei.com> Cc: William Cohen <wcohen@redhat.com> Cc: Zechuan Chen <chenzechuan1@huawei.com> Cc: bpf@vger.kernel.org Cc: llvm@lists.linux.dev Cc: yaowenbin <yaowenbin1@huawei.com> Link: https://lore.kernel.org/r/20220826164242.43412-15-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-26 16:42:38 +00:00
mutex_lock(&dso->lock);
nsinfo__mountns_enter(dso->nsinfo, &nsc);
if (filename__read_build_id(dso->long_name, &dso->bid) > 0)
dso->has_build_id = true;
else if (dso->nsinfo) {
char *new_name;
new_name = filename_with_chroot(dso->nsinfo->pid,
dso->long_name);
if (new_name && filename__read_build_id(new_name, &dso->bid) > 0)
dso->has_build_id = true;
free(new_name);
}
nsinfo__mountns_exit(&nsc);
perf dso: Hold lock when accessing nsinfo There may be threads racing to update dso->nsinfo: https://lore.kernel.org/linux-perf-users/CAP-5=fWZH20L4kv-BwVtGLwR=Em3AOOT+Q4QGivvQuYn5AsPRg@mail.gmail.com/ Holding the dso->lock avoids use-after-free, memory leaks and other such bugs. Apply the fix in: https://lore.kernel.org/linux-perf-users/20211118193714.2293728-1-irogers@google.com/ of there being a missing nsinfo__put now that the accesses are data race free. Fixes test "Lookup mmap thread" when compiled with address sanitizer. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Truong <alexandre.truong@arm.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andres Freund <andres@anarazel.de> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: André Almeida <andrealmeid@igalia.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Colin Ian King <colin.king@intel.com> Cc: Dario Petrillo <dario.pk1@gmail.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Dave Marchevsky <davemarchevsky@fb.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Fangrui Song <maskray@google.com> Cc: Hewenliang <hewenliang4@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jason Wang <wangborong@cdjrlc.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Pavithra Gurushankar <gpavithrasha@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Remi Bernon <rbernon@codeweavers.com> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Tom Rix <trix@redhat.com> Cc: Weiguo Li <liwg06@foxmail.com> Cc: Wenyu Liu <liuwenyu7@huawei.com> Cc: William Cohen <wcohen@redhat.com> Cc: Zechuan Chen <chenzechuan1@huawei.com> Cc: bpf@vger.kernel.org Cc: llvm@lists.linux.dev Cc: yaowenbin <yaowenbin1@huawei.com> Link: https://lore.kernel.org/r/20220826164242.43412-15-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-26 16:42:38 +00:00
mutex_unlock(&dso->lock);
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
return dso->has_build_id ? 0 : -1;
}
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
perf inject: Add a command line option to specify build ids. This commit adds the option --known-build-ids to perf inject. It allows the user to explicitly specify the build id for a given path, instead of retrieving it from the current system. This is useful in cases where a perf.data file is processed on a different system from where it was collected, or if some of the binaries are no longer available. The build ids and paths are specified in pairs in the command line. Using the file:// specifier, build ids can be loaded from a file directly generated by perf buildid-list. This is convenient to copy build ids from one perf.data file to another. ** Example: In this example we use perf record to create two perf.data files, one with build ids and another without, and use perf buildid-list and perf inject to copy the build ids from the first file to the second. $ perf record ls /tmp $ perf record --no-buildid -o perf.data.no-buildid ls /tmp $ perf buildid-list > build-ids.txt $ perf inject -b --known-build-ids='file://build-ids.txt' \ -i perf.data.no-buildid -o perf.data.buildid Signed-off-by: Raul Silvera <rsilvera@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220815225922.2118745-1-rsilvera@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-15 22:59:22 +00:00
static struct strlist *perf_inject__parse_known_build_ids(
const char *known_build_ids_string)
{
struct str_node *pos, *tmp;
struct strlist *known_build_ids;
int bid_len;
known_build_ids = strlist__new(known_build_ids_string, NULL);
if (known_build_ids == NULL)
return NULL;
strlist__for_each_entry_safe(pos, tmp, known_build_ids) {
const char *build_id, *dso_name;
build_id = skip_spaces(pos->s);
dso_name = strchr(build_id, ' ');
if (dso_name == NULL) {
strlist__remove(known_build_ids, pos);
continue;
}
bid_len = dso_name - pos->s;
dso_name = skip_spaces(dso_name);
if (bid_len % 2 != 0 || bid_len >= SBUILD_ID_SIZE) {
strlist__remove(known_build_ids, pos);
continue;
}
for (int ix = 0; 2 * ix + 1 < bid_len; ++ix) {
if (!isxdigit(build_id[2 * ix]) ||
!isxdigit(build_id[2 * ix + 1])) {
strlist__remove(known_build_ids, pos);
break;
}
}
}
return known_build_ids;
}
static bool perf_inject__lookup_known_build_id(struct perf_inject *inject,
struct dso *dso)
{
struct str_node *pos;
int bid_len;
strlist__for_each_entry(pos, inject->known_build_ids) {
const char *build_id, *dso_name;
build_id = skip_spaces(pos->s);
dso_name = strchr(build_id, ' ');
bid_len = dso_name - pos->s;
dso_name = skip_spaces(dso_name);
if (strcmp(dso->long_name, dso_name))
continue;
for (int ix = 0; 2 * ix + 1 < bid_len; ++ix) {
dso->bid.data[ix] = (hex(build_id[2 * ix]) << 4 |
hex(build_id[2 * ix + 1]));
}
dso->bid.size = bid_len / 2;
dso->has_build_id = 1;
return true;
}
return false;
}
static int dso__inject_build_id(struct dso *dso, struct perf_tool *tool,
perf inject: Do not load map/dso when injecting build-id No need to load symbols in a DSO when injecting build-id. I guess the reason was to check the DSO is a special file like anon files. Use some helper functions in map.c to check them before reading build-id. Also pass sample event's cpumode to a new build-id event. It brought a speedup in the benchmark of 25 -> 21 msec on my laptop. Also the memory usage (Max RSS) went down by ~200 KB. # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 21.389 msec (+- 0.138 msec) Average time per event: 2.097 usec (+- 0.014 usec) Average memory usage: 8225 KB (+- 0 KB) Committer notes: Before: $ perf stat -r5 perf bench internals inject-build-id > /dev/null Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 4,020.56 msec task-clock:u # 1.271 CPUs utilized ( +- 0.74% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 123,354 page-faults:u # 0.031 M/sec ( +- 0.81% ) 7,119,951,568 cycles:u # 1.771 GHz ( +- 1.74% ) (83.27%) 230,086,969 stalled-cycles-frontend:u # 3.23% frontend cycles idle ( +- 1.97% ) (83.41%) 1,168,298,765 stalled-cycles-backend:u # 16.41% backend cycles idle ( +- 1.13% ) (83.44%) 11,173,083,669 instructions:u # 1.57 insn per cycle # 0.10 stalled cycles per insn ( +- 1.58% ) (83.31%) 2,413,908,936 branches:u # 600.392 M/sec ( +- 1.69% ) (83.26%) 46,576,289 branch-misses:u # 1.93% of all branches ( +- 2.20% ) (83.31%) 3.1638 +- 0.0309 seconds time elapsed ( +- 0.98% ) $ After: $ perf stat -r5 perf bench internals inject-build-id > /dev/null Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 2,379.94 msec task-clock:u # 1.473 CPUs utilized ( +- 0.18% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 62,584 page-faults:u # 0.026 M/sec ( +- 0.07% ) 2,372,389,668 cycles:u # 0.997 GHz ( +- 0.29% ) (83.14%) 106,937,862 stalled-cycles-frontend:u # 4.51% frontend cycles idle ( +- 4.89% ) (83.20%) 581,697,915 stalled-cycles-backend:u # 24.52% backend cycles idle ( +- 0.71% ) (83.47%) 3,659,692,199 instructions:u # 1.54 insn per cycle # 0.16 stalled cycles per insn ( +- 0.10% ) (83.63%) 791,372,961 branches:u # 332.518 M/sec ( +- 0.27% ) (83.39%) 10,648,083 branch-misses:u # 1.35% of all branches ( +- 0.22% ) (83.16%) 1.61570 +- 0.00172 seconds time elapsed ( +- 0.11% ) $ Signed-off-by: Namhyung Kim <namhyung@kernel.org> Original-patch-by: Stephane Eranian <eranian@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201012070214.2074921-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-12 07:02:12 +00:00
struct machine *machine, u8 cpumode, u32 flags)
{
perf inject: Add a command line option to specify build ids. This commit adds the option --known-build-ids to perf inject. It allows the user to explicitly specify the build id for a given path, instead of retrieving it from the current system. This is useful in cases where a perf.data file is processed on a different system from where it was collected, or if some of the binaries are no longer available. The build ids and paths are specified in pairs in the command line. Using the file:// specifier, build ids can be loaded from a file directly generated by perf buildid-list. This is convenient to copy build ids from one perf.data file to another. ** Example: In this example we use perf record to create two perf.data files, one with build ids and another without, and use perf buildid-list and perf inject to copy the build ids from the first file to the second. $ perf record ls /tmp $ perf record --no-buildid -o perf.data.no-buildid ls /tmp $ perf buildid-list > build-ids.txt $ perf inject -b --known-build-ids='file://build-ids.txt' \ -i perf.data.no-buildid -o perf.data.buildid Signed-off-by: Raul Silvera <rsilvera@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220815225922.2118745-1-rsilvera@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-15 22:59:22 +00:00
struct perf_inject *inject = container_of(tool, struct perf_inject,
tool);
int err;
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
perf inject: Do not load map/dso when injecting build-id No need to load symbols in a DSO when injecting build-id. I guess the reason was to check the DSO is a special file like anon files. Use some helper functions in map.c to check them before reading build-id. Also pass sample event's cpumode to a new build-id event. It brought a speedup in the benchmark of 25 -> 21 msec on my laptop. Also the memory usage (Max RSS) went down by ~200 KB. # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 21.389 msec (+- 0.138 msec) Average time per event: 2.097 usec (+- 0.014 usec) Average memory usage: 8225 KB (+- 0 KB) Committer notes: Before: $ perf stat -r5 perf bench internals inject-build-id > /dev/null Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 4,020.56 msec task-clock:u # 1.271 CPUs utilized ( +- 0.74% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 123,354 page-faults:u # 0.031 M/sec ( +- 0.81% ) 7,119,951,568 cycles:u # 1.771 GHz ( +- 1.74% ) (83.27%) 230,086,969 stalled-cycles-frontend:u # 3.23% frontend cycles idle ( +- 1.97% ) (83.41%) 1,168,298,765 stalled-cycles-backend:u # 16.41% backend cycles idle ( +- 1.13% ) (83.44%) 11,173,083,669 instructions:u # 1.57 insn per cycle # 0.10 stalled cycles per insn ( +- 1.58% ) (83.31%) 2,413,908,936 branches:u # 600.392 M/sec ( +- 1.69% ) (83.26%) 46,576,289 branch-misses:u # 1.93% of all branches ( +- 2.20% ) (83.31%) 3.1638 +- 0.0309 seconds time elapsed ( +- 0.98% ) $ After: $ perf stat -r5 perf bench internals inject-build-id > /dev/null Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 2,379.94 msec task-clock:u # 1.473 CPUs utilized ( +- 0.18% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 62,584 page-faults:u # 0.026 M/sec ( +- 0.07% ) 2,372,389,668 cycles:u # 0.997 GHz ( +- 0.29% ) (83.14%) 106,937,862 stalled-cycles-frontend:u # 4.51% frontend cycles idle ( +- 4.89% ) (83.20%) 581,697,915 stalled-cycles-backend:u # 24.52% backend cycles idle ( +- 0.71% ) (83.47%) 3,659,692,199 instructions:u # 1.54 insn per cycle # 0.16 stalled cycles per insn ( +- 0.10% ) (83.63%) 791,372,961 branches:u # 332.518 M/sec ( +- 0.27% ) (83.39%) 10,648,083 branch-misses:u # 1.35% of all branches ( +- 0.22% ) (83.16%) 1.61570 +- 0.00172 seconds time elapsed ( +- 0.11% ) $ Signed-off-by: Namhyung Kim <namhyung@kernel.org> Original-patch-by: Stephane Eranian <eranian@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201012070214.2074921-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-12 07:02:12 +00:00
if (is_anon_memory(dso->long_name) || flags & MAP_HUGETLB)
return 0;
if (is_no_dso_memory(dso->long_name))
return 0;
perf inject: Add a command line option to specify build ids. This commit adds the option --known-build-ids to perf inject. It allows the user to explicitly specify the build id for a given path, instead of retrieving it from the current system. This is useful in cases where a perf.data file is processed on a different system from where it was collected, or if some of the binaries are no longer available. The build ids and paths are specified in pairs in the command line. Using the file:// specifier, build ids can be loaded from a file directly generated by perf buildid-list. This is convenient to copy build ids from one perf.data file to another. ** Example: In this example we use perf record to create two perf.data files, one with build ids and another without, and use perf buildid-list and perf inject to copy the build ids from the first file to the second. $ perf record ls /tmp $ perf record --no-buildid -o perf.data.no-buildid ls /tmp $ perf buildid-list > build-ids.txt $ perf inject -b --known-build-ids='file://build-ids.txt' \ -i perf.data.no-buildid -o perf.data.buildid Signed-off-by: Raul Silvera <rsilvera@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220815225922.2118745-1-rsilvera@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-15 22:59:22 +00:00
if (inject->known_build_ids != NULL &&
perf_inject__lookup_known_build_id(inject, dso))
return 1;
if (dso__read_build_id(dso) < 0) {
pr_debug("no build_id found for %s\n", dso->long_name);
return -1;
}
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
perf inject: Do not load map/dso when injecting build-id No need to load symbols in a DSO when injecting build-id. I guess the reason was to check the DSO is a special file like anon files. Use some helper functions in map.c to check them before reading build-id. Also pass sample event's cpumode to a new build-id event. It brought a speedup in the benchmark of 25 -> 21 msec on my laptop. Also the memory usage (Max RSS) went down by ~200 KB. # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 21.389 msec (+- 0.138 msec) Average time per event: 2.097 usec (+- 0.014 usec) Average memory usage: 8225 KB (+- 0 KB) Committer notes: Before: $ perf stat -r5 perf bench internals inject-build-id > /dev/null Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 4,020.56 msec task-clock:u # 1.271 CPUs utilized ( +- 0.74% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 123,354 page-faults:u # 0.031 M/sec ( +- 0.81% ) 7,119,951,568 cycles:u # 1.771 GHz ( +- 1.74% ) (83.27%) 230,086,969 stalled-cycles-frontend:u # 3.23% frontend cycles idle ( +- 1.97% ) (83.41%) 1,168,298,765 stalled-cycles-backend:u # 16.41% backend cycles idle ( +- 1.13% ) (83.44%) 11,173,083,669 instructions:u # 1.57 insn per cycle # 0.10 stalled cycles per insn ( +- 1.58% ) (83.31%) 2,413,908,936 branches:u # 600.392 M/sec ( +- 1.69% ) (83.26%) 46,576,289 branch-misses:u # 1.93% of all branches ( +- 2.20% ) (83.31%) 3.1638 +- 0.0309 seconds time elapsed ( +- 0.98% ) $ After: $ perf stat -r5 perf bench internals inject-build-id > /dev/null Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 2,379.94 msec task-clock:u # 1.473 CPUs utilized ( +- 0.18% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 62,584 page-faults:u # 0.026 M/sec ( +- 0.07% ) 2,372,389,668 cycles:u # 0.997 GHz ( +- 0.29% ) (83.14%) 106,937,862 stalled-cycles-frontend:u # 4.51% frontend cycles idle ( +- 4.89% ) (83.20%) 581,697,915 stalled-cycles-backend:u # 24.52% backend cycles idle ( +- 0.71% ) (83.47%) 3,659,692,199 instructions:u # 1.54 insn per cycle # 0.16 stalled cycles per insn ( +- 0.10% ) (83.63%) 791,372,961 branches:u # 332.518 M/sec ( +- 0.27% ) (83.39%) 10,648,083 branch-misses:u # 1.35% of all branches ( +- 0.22% ) (83.16%) 1.61570 +- 0.00172 seconds time elapsed ( +- 0.11% ) $ Signed-off-by: Namhyung Kim <namhyung@kernel.org> Original-patch-by: Stephane Eranian <eranian@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201012070214.2074921-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-12 07:02:12 +00:00
err = perf_event__synthesize_build_id(tool, dso, cpumode,
perf_event__repipe, machine);
if (err) {
pr_err("Can't synthesize build_id event for %s\n", dso->long_name);
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
return -1;
}
return 0;
}
perf bench: Add build-id injection benchmark Sometimes I can see that 'perf record' piped with 'perf inject' take a long time processing build-ids. So introduce a inject-build-id benchmark to the internals benchmark suite to measure its overhead regularly. It runs the 'perf inject' command internally and feeds the given number of synthesized events (MMAP2 + SAMPLE basically). Usage: perf bench internals inject-build-id <options> -i, --iterations <n> Number of iterations used to compute average (default: 100) -m, --nr-mmaps <n> Number of mmap events for each iteration (default: 100) -n, --nr-samples <n> Number of sample events per mmap event (default: 100) -v, --verbose be more verbose (show iteration count, DSO name, etc) By default, it measures average processing time of 100 MMAP2 events and 10000 SAMPLE events. Below is a result on my laptop. $ perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 25.789 msec (+- 0.202 msec) Average time per event: 2.528 usec (+- 0.020 usec) Average memory usage: 8411 KB (+- 7 KB) Committer testing: $ perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks syscall: System call benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks futex: Futex stressing benchmarks epoll: Epoll stressing benchmarks internals: Perf-internals benchmarks all: All benchmarks $ perf bench internals # List of available benchmarks for collection 'internals': synthesize: Benchmark perf event synthesis kallsyms-parse: Benchmark kallsyms parsing inject-build-id: Benchmark build-id injection $ perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.202 msec (+- 0.059 msec) Average time per event: 1.392 usec (+- 0.006 usec) Average memory usage: 12650 KB (+- 10 KB) Average build-id-all injection took: 12.831 msec (+- 0.071 msec) Average time per event: 1.258 usec (+- 0.007 usec) Average memory usage: 11895 KB (+- 10 KB) $ $ perf stat -r5 perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.380 msec (+- 0.056 msec) Average time per event: 1.410 usec (+- 0.006 usec) Average memory usage: 12608 KB (+- 11 KB) Average build-id-all injection took: 11.889 msec (+- 0.064 msec) Average time per event: 1.166 usec (+- 0.006 usec) Average memory usage: 11838 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.246 msec (+- 0.065 msec) Average time per event: 1.397 usec (+- 0.006 usec) Average memory usage: 12744 KB (+- 10 KB) Average build-id-all injection took: 12.019 msec (+- 0.066 msec) Average time per event: 1.178 usec (+- 0.006 usec) Average memory usage: 11963 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.321 msec (+- 0.067 msec) Average time per event: 1.404 usec (+- 0.007 usec) Average memory usage: 12690 KB (+- 10 KB) Average build-id-all injection took: 11.909 msec (+- 0.041 msec) Average time per event: 1.168 usec (+- 0.004 usec) Average memory usage: 11938 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.287 msec (+- 0.059 msec) Average time per event: 1.401 usec (+- 0.006 usec) Average memory usage: 12864 KB (+- 10 KB) Average build-id-all injection took: 11.862 msec (+- 0.058 msec) Average time per event: 1.163 usec (+- 0.006 usec) Average memory usage: 12103 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.402 msec (+- 0.053 msec) Average time per event: 1.412 usec (+- 0.005 usec) Average memory usage: 12876 KB (+- 10 KB) Average build-id-all injection took: 11.826 msec (+- 0.061 msec) Average time per event: 1.159 usec (+- 0.006 usec) Average memory usage: 12111 KB (+- 10 KB) Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 4,267.48 msec task-clock:u # 1.502 CPUs utilized ( +- 0.14% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 102,092 page-faults:u # 0.024 M/sec ( +- 0.08% ) 3,894,589,578 cycles:u # 0.913 GHz ( +- 0.19% ) (83.49%) 140,078,421 stalled-cycles-frontend:u # 3.60% frontend cycles idle ( +- 0.77% ) (83.34%) 948,581,189 stalled-cycles-backend:u # 24.36% backend cycles idle ( +- 0.46% ) (83.25%) 5,835,587,719 instructions:u # 1.50 insn per cycle # 0.16 stalled cycles per insn ( +- 0.21% ) (83.24%) 1,267,423,636 branches:u # 296.996 M/sec ( +- 0.22% ) (83.12%) 17,484,290 branch-misses:u # 1.38% of all branches ( +- 0.12% ) (83.55%) 2.84176 +- 0.00222 seconds time elapsed ( +- 0.08% ) $ Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20201012070214.2074921-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-12 07:02:09 +00:00
int perf_event__inject_buildid(struct perf_tool *tool, union perf_event *event,
struct perf_sample *sample,
struct evsel *evsel __maybe_unused,
struct machine *machine)
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
{
struct addr_location al;
struct thread *thread;
thread = machine__findnew_thread(machine, sample->pid, sample->tid);
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
if (thread == NULL) {
pr_err("problem processing %d event, skipping it.\n",
event->header.type);
goto repipe;
}
if (thread__find_map(thread, sample->cpumode, sample->ip, &al)) {
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
if (!al.map->dso->hit) {
al.map->dso->hit = 1;
perf inject: Do not load map/dso when injecting build-id No need to load symbols in a DSO when injecting build-id. I guess the reason was to check the DSO is a special file like anon files. Use some helper functions in map.c to check them before reading build-id. Also pass sample event's cpumode to a new build-id event. It brought a speedup in the benchmark of 25 -> 21 msec on my laptop. Also the memory usage (Max RSS) went down by ~200 KB. # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 21.389 msec (+- 0.138 msec) Average time per event: 2.097 usec (+- 0.014 usec) Average memory usage: 8225 KB (+- 0 KB) Committer notes: Before: $ perf stat -r5 perf bench internals inject-build-id > /dev/null Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 4,020.56 msec task-clock:u # 1.271 CPUs utilized ( +- 0.74% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 123,354 page-faults:u # 0.031 M/sec ( +- 0.81% ) 7,119,951,568 cycles:u # 1.771 GHz ( +- 1.74% ) (83.27%) 230,086,969 stalled-cycles-frontend:u # 3.23% frontend cycles idle ( +- 1.97% ) (83.41%) 1,168,298,765 stalled-cycles-backend:u # 16.41% backend cycles idle ( +- 1.13% ) (83.44%) 11,173,083,669 instructions:u # 1.57 insn per cycle # 0.10 stalled cycles per insn ( +- 1.58% ) (83.31%) 2,413,908,936 branches:u # 600.392 M/sec ( +- 1.69% ) (83.26%) 46,576,289 branch-misses:u # 1.93% of all branches ( +- 2.20% ) (83.31%) 3.1638 +- 0.0309 seconds time elapsed ( +- 0.98% ) $ After: $ perf stat -r5 perf bench internals inject-build-id > /dev/null Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 2,379.94 msec task-clock:u # 1.473 CPUs utilized ( +- 0.18% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 62,584 page-faults:u # 0.026 M/sec ( +- 0.07% ) 2,372,389,668 cycles:u # 0.997 GHz ( +- 0.29% ) (83.14%) 106,937,862 stalled-cycles-frontend:u # 4.51% frontend cycles idle ( +- 4.89% ) (83.20%) 581,697,915 stalled-cycles-backend:u # 24.52% backend cycles idle ( +- 0.71% ) (83.47%) 3,659,692,199 instructions:u # 1.54 insn per cycle # 0.16 stalled cycles per insn ( +- 0.10% ) (83.63%) 791,372,961 branches:u # 332.518 M/sec ( +- 0.27% ) (83.39%) 10,648,083 branch-misses:u # 1.35% of all branches ( +- 0.22% ) (83.16%) 1.61570 +- 0.00172 seconds time elapsed ( +- 0.11% ) $ Signed-off-by: Namhyung Kim <namhyung@kernel.org> Original-patch-by: Stephane Eranian <eranian@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201012070214.2074921-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-12 07:02:12 +00:00
dso__inject_build_id(al.map->dso, tool, machine,
sample->cpumode, al.map->flags);
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
}
}
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 23:43:22 +00:00
thread__put(thread);
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
repipe:
perf_event__repipe(tool, event, sample, machine);
return 0;
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
}
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
static int perf_inject__sched_process_exit(struct perf_tool *tool,
union perf_event *event __maybe_unused,
struct perf_sample *sample,
struct evsel *evsel __maybe_unused,
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
struct machine *machine __maybe_unused)
{
struct perf_inject *inject = container_of(tool, struct perf_inject, tool);
struct event_entry *ent;
list_for_each_entry(ent, &inject->samples, node) {
if (sample->tid == ent->tid) {
list_del_init(&ent->node);
free(ent);
break;
}
}
return 0;
}
static int perf_inject__sched_switch(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct evsel *evsel,
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
struct machine *machine)
{
struct perf_inject *inject = container_of(tool, struct perf_inject, tool);
struct event_entry *ent;
perf_inject__sched_process_exit(tool, event, sample, evsel, machine);
ent = malloc(event->header.size + sizeof(struct event_entry));
if (ent == NULL) {
color_fprintf(stderr, PERF_COLOR_RED,
"Not enough memory to process sched switch event!");
return -1;
}
ent->tid = sample->tid;
memcpy(&ent->event, event, event->header.size);
list_add(&ent->node, &inject->samples);
return 0;
}
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 22:59:39 +00:00
#ifdef HAVE_LIBTRACEEVENT
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
static int perf_inject__sched_stat(struct perf_tool *tool,
union perf_event *event __maybe_unused,
struct perf_sample *sample,
struct evsel *evsel,
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
struct machine *machine)
{
struct event_entry *ent;
union perf_event *event_sw;
struct perf_sample sample_sw;
struct perf_inject *inject = container_of(tool, struct perf_inject, tool);
u32 pid = evsel__intval(evsel, sample, "pid");
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
list_for_each_entry(ent, &inject->samples, node) {
if (pid == ent->tid)
goto found;
}
return 0;
found:
event_sw = &ent->event[0];
evsel__parse_sample(evsel, event_sw, &sample_sw);
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
sample_sw.period = sample->period;
sample_sw.time = sample->time;
libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-21 11:24:29 +00:00
perf_event__synthesize_sample(event_sw, evsel->core.attr.sample_type,
evsel->core.attr.read_format, &sample_sw);
build_id__mark_dso_hit(tool, event_sw, &sample_sw, evsel, machine);
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
return perf_event__repipe(tool, event_sw, &sample_sw, machine);
}
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 22:59:39 +00:00
#endif
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
perf inject: Add support for injecting guest sideband events Inject events from a perf.data file recorded in a virtual machine into a perf.data file recorded on the host at the same time. Only side band events (e.g. mmap, comm, fork, exit etc) and build IDs are injected. Additionally, the guest kcore_dir is copied as kcore_dir__ appended to the machine PID. This is non-trivial because: o It is not possible to process 2 sessions simultaneously so instead events are first written to a temporary file. o To avoid conflict, guest sample IDs are replaced with new unused sample IDs. o Guest event's CPU is changed to be the host CPU because it is more useful for reporting and analysis. o Sample ID is mapped to machine PID which is recorded with VCPU in the id index. This is important to allow guest events to be related to the guest machine and VCPU. o Timestamps must be converted. o Events are inserted to obey finished-round ordering. The anticipated use-case is: - start recording sideband events in a guest machine - start recording an AUX area trace on the host which can trace also the guest (e.g. Intel PT) - run test case on the guest - stop recording on the host - stop recording on the guest - copy the guest perf.data file to the host - inject the guest perf.data file sideband events into the host perf.data file using perf inject - the resulting perf.data file can now be used Subsequent patches provide Intel PT support for this. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220711093218.10967-25-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-11 09:32:07 +00:00
static struct guest_vcpu *guest_session__vcpu(struct guest_session *gs, u32 vcpu)
{
if (realloc_array_as_needed(gs->vcpu, gs->vcpu_cnt, vcpu, NULL))
return NULL;
return &gs->vcpu[vcpu];
}
static int guest_session__output_bytes(struct guest_session *gs, void *buf, size_t sz)
{
ssize_t ret = writen(gs->tmp_fd, buf, sz);
return ret < 0 ? ret : 0;
}
static int guest_session__repipe(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample __maybe_unused,
struct machine *machine __maybe_unused)
{
struct guest_session *gs = container_of(tool, struct guest_session, tool);
return guest_session__output_bytes(gs, event, event->header.size);
}
static int guest_session__map_tid(struct guest_session *gs, u32 tid, u32 vcpu)
{
struct guest_tid *guest_tid = zalloc(sizeof(*guest_tid));
int hash;
if (!guest_tid)
return -ENOMEM;
guest_tid->tid = tid;
guest_tid->vcpu = vcpu;
hash = hash_32(guest_tid->tid, PERF_EVLIST__HLIST_BITS);
hlist_add_head(&guest_tid->node, &gs->tids[hash]);
return 0;
}
static int host_peek_vm_comms_cb(struct perf_session *session __maybe_unused,
union perf_event *event,
u64 offset __maybe_unused, void *data)
{
struct guest_session *gs = data;
unsigned int vcpu;
struct guest_vcpu *guest_vcpu;
int ret;
if (event->header.type != PERF_RECORD_COMM ||
event->comm.pid != gs->machine_pid)
return 0;
/*
* QEMU option -name debug-threads=on, causes thread names formatted as
* below, although it is not an ABI. Also libvirt seems to use this by
* default. Here we rely on it to tell us which thread is which VCPU.
*/
ret = sscanf(event->comm.comm, "CPU %u/KVM", &vcpu);
if (ret <= 0)
return ret;
pr_debug("Found VCPU: tid %u comm %s vcpu %u\n",
event->comm.tid, event->comm.comm, vcpu);
if (vcpu > INT_MAX) {
pr_err("Invalid VCPU %u\n", vcpu);
return -EINVAL;
}
guest_vcpu = guest_session__vcpu(gs, vcpu);
if (!guest_vcpu)
return -ENOMEM;
if (guest_vcpu->tid && guest_vcpu->tid != event->comm.tid) {
pr_err("Fatal error: Two threads found with the same VCPU\n");
return -EINVAL;
}
guest_vcpu->tid = event->comm.tid;
return guest_session__map_tid(gs, event->comm.tid, vcpu);
}
static int host_peek_vm_comms(struct perf_session *session, struct guest_session *gs)
{
return perf_session__peek_events(session, session->header.data_offset,
session->header.data_size,
host_peek_vm_comms_cb, gs);
}
static bool evlist__is_id_used(struct evlist *evlist, u64 id)
{
return evlist__id2sid(evlist, id);
}
static u64 guest_session__allocate_new_id(struct guest_session *gs, struct evlist *host_evlist)
{
do {
gs->highest_id += 1;
} while (!gs->highest_id || evlist__is_id_used(host_evlist, gs->highest_id));
return gs->highest_id;
}
static int guest_session__map_id(struct guest_session *gs, u64 id, u64 host_id, u32 vcpu)
{
struct guest_id *guest_id = zalloc(sizeof(*guest_id));
int hash;
if (!guest_id)
return -ENOMEM;
guest_id->id = id;
guest_id->host_id = host_id;
guest_id->vcpu = vcpu;
hash = hash_64(guest_id->id, PERF_EVLIST__HLIST_BITS);
hlist_add_head(&guest_id->node, &gs->heads[hash]);
return 0;
}
static u64 evlist__find_highest_id(struct evlist *evlist)
{
struct evsel *evsel;
u64 highest_id = 1;
evlist__for_each_entry(evlist, evsel) {
u32 j;
for (j = 0; j < evsel->core.ids; j++) {
u64 id = evsel->core.id[j];
if (id > highest_id)
highest_id = id;
}
}
return highest_id;
}
static int guest_session__map_ids(struct guest_session *gs, struct evlist *host_evlist)
{
struct evlist *evlist = gs->session->evlist;
struct evsel *evsel;
int ret;
evlist__for_each_entry(evlist, evsel) {
u32 j;
for (j = 0; j < evsel->core.ids; j++) {
struct perf_sample_id *sid;
u64 host_id;
u64 id;
id = evsel->core.id[j];
sid = evlist__id2sid(evlist, id);
if (!sid || sid->cpu.cpu == -1)
continue;
host_id = guest_session__allocate_new_id(gs, host_evlist);
ret = guest_session__map_id(gs, id, host_id, sid->cpu.cpu);
if (ret)
return ret;
}
}
return 0;
}
static struct guest_id *guest_session__lookup_id(struct guest_session *gs, u64 id)
{
struct hlist_head *head;
struct guest_id *guest_id;
int hash;
hash = hash_64(id, PERF_EVLIST__HLIST_BITS);
head = &gs->heads[hash];
hlist_for_each_entry(guest_id, head, node)
if (guest_id->id == id)
return guest_id;
return NULL;
}
static int process_attr(struct perf_tool *tool, union perf_event *event,
struct perf_sample *sample __maybe_unused,
struct machine *machine __maybe_unused)
{
struct perf_inject *inject = container_of(tool, struct perf_inject, tool);
return perf_event__process_attr(tool, event, &inject->session->evlist);
}
static int guest_session__add_attr(struct guest_session *gs, struct evsel *evsel)
{
struct perf_inject *inject = container_of(gs, struct perf_inject, guest_session);
struct perf_event_attr attr = evsel->core.attr;
u64 *id_array;
u32 *vcpu_array;
int ret = -ENOMEM;
u32 i;
id_array = calloc(evsel->core.ids, sizeof(*id_array));
if (!id_array)
return -ENOMEM;
vcpu_array = calloc(evsel->core.ids, sizeof(*vcpu_array));
if (!vcpu_array)
goto out;
for (i = 0; i < evsel->core.ids; i++) {
u64 id = evsel->core.id[i];
struct guest_id *guest_id = guest_session__lookup_id(gs, id);
if (!guest_id) {
pr_err("Failed to find guest id %"PRIu64"\n", id);
ret = -EINVAL;
goto out;
}
id_array[i] = guest_id->host_id;
vcpu_array[i] = guest_id->vcpu;
}
attr.sample_type |= PERF_SAMPLE_IDENTIFIER;
attr.exclude_host = 1;
attr.exclude_guest = 0;
ret = perf_event__synthesize_attr(&inject->tool, &attr, evsel->core.ids,
id_array, process_attr);
if (ret)
pr_err("Failed to add guest attr.\n");
for (i = 0; i < evsel->core.ids; i++) {
struct perf_sample_id *sid;
u32 vcpu = vcpu_array[i];
sid = evlist__id2sid(inject->session->evlist, id_array[i]);
/* Guest event is per-thread from the host point of view */
sid->cpu.cpu = -1;
sid->tid = gs->vcpu[vcpu].tid;
sid->machine_pid = gs->machine_pid;
sid->vcpu.cpu = vcpu;
}
out:
free(vcpu_array);
free(id_array);
return ret;
}
static int guest_session__add_attrs(struct guest_session *gs)
{
struct evlist *evlist = gs->session->evlist;
struct evsel *evsel;
int ret;
evlist__for_each_entry(evlist, evsel) {
ret = guest_session__add_attr(gs, evsel);
if (ret)
return ret;
}
return 0;
}
static int synthesize_id_index(struct perf_inject *inject, size_t new_cnt)
{
struct perf_session *session = inject->session;
struct evlist *evlist = session->evlist;
struct machine *machine = &session->machines.host;
size_t from = evlist->core.nr_entries - new_cnt;
return __perf_event__synthesize_id_index(&inject->tool, perf_event__repipe,
evlist, machine, from);
}
static struct guest_tid *guest_session__lookup_tid(struct guest_session *gs, u32 tid)
{
struct hlist_head *head;
struct guest_tid *guest_tid;
int hash;
hash = hash_32(tid, PERF_EVLIST__HLIST_BITS);
head = &gs->tids[hash];
hlist_for_each_entry(guest_tid, head, node)
if (guest_tid->tid == tid)
return guest_tid;
return NULL;
}
static bool dso__is_in_kernel_space(struct dso *dso)
{
if (dso__is_vdso(dso))
return false;
return dso__is_kcore(dso) ||
dso->kernel ||
is_kernel_module(dso->long_name, PERF_RECORD_MISC_CPUMODE_UNKNOWN);
}
static u64 evlist__first_id(struct evlist *evlist)
{
struct evsel *evsel;
evlist__for_each_entry(evlist, evsel) {
if (evsel->core.ids)
return evsel->core.id[0];
}
return 0;
}
static int process_build_id(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample __maybe_unused,
struct machine *machine __maybe_unused)
{
struct perf_inject *inject = container_of(tool, struct perf_inject, tool);
return perf_event__process_build_id(inject->session, event);
}
static int synthesize_build_id(struct perf_inject *inject, struct dso *dso, pid_t machine_pid)
{
struct machine *machine = perf_session__findnew_machine(inject->session, machine_pid);
u8 cpumode = dso__is_in_kernel_space(dso) ?
PERF_RECORD_MISC_GUEST_KERNEL :
PERF_RECORD_MISC_GUEST_USER;
if (!machine)
return -ENOMEM;
dso->hit = 1;
return perf_event__synthesize_build_id(&inject->tool, dso, cpumode,
process_build_id, machine);
}
static int guest_session__add_build_ids(struct guest_session *gs)
{
struct perf_inject *inject = container_of(gs, struct perf_inject, guest_session);
struct machine *machine = &gs->session->machines.host;
struct dso *dso;
int ret;
/* Build IDs will be put in the Build ID feature section */
perf_header__set_feat(&inject->session->header, HEADER_BUILD_ID);
dsos__for_each_with_build_id(dso, &machine->dsos.head) {
ret = synthesize_build_id(inject, dso, gs->machine_pid);
if (ret)
return ret;
}
return 0;
}
static int guest_session__ksymbol_event(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample __maybe_unused,
struct machine *machine __maybe_unused)
{
struct guest_session *gs = container_of(tool, struct guest_session, tool);
/* Only support out-of-line i.e. no BPF support */
if (event->ksymbol.ksym_type != PERF_RECORD_KSYMBOL_TYPE_OOL)
return 0;
return guest_session__output_bytes(gs, event, event->header.size);
}
static int guest_session__start(struct guest_session *gs, const char *name, bool force)
{
char tmp_file_name[] = "/tmp/perf-inject-guest_session-XXXXXX";
struct perf_session *session;
int ret;
/* Only these events will be injected */
gs->tool.mmap = guest_session__repipe;
gs->tool.mmap2 = guest_session__repipe;
gs->tool.comm = guest_session__repipe;
gs->tool.fork = guest_session__repipe;
gs->tool.exit = guest_session__repipe;
gs->tool.lost = guest_session__repipe;
gs->tool.context_switch = guest_session__repipe;
gs->tool.ksymbol = guest_session__ksymbol_event;
gs->tool.text_poke = guest_session__repipe;
/*
* Processing a build ID creates a struct dso with that build ID. Later,
* all guest dsos are iterated and the build IDs processed into the host
* session where they will be output to the Build ID feature section
* when the perf.data file header is written.
*/
gs->tool.build_id = perf_event__process_build_id;
/* Process the id index to know what VCPU an ID belongs to */
gs->tool.id_index = perf_event__process_id_index;
gs->tool.ordered_events = true;
gs->tool.ordering_requires_timestamps = true;
gs->data.path = name;
gs->data.force = force;
gs->data.mode = PERF_DATA_MODE_READ;
session = perf_session__new(&gs->data, &gs->tool);
if (IS_ERR(session))
return PTR_ERR(session);
gs->session = session;
/*
* Initial events have zero'd ID samples. Get default ID sample size
* used for removing them.
*/
gs->dflt_id_hdr_size = session->machines.host.id_hdr_size;
/* And default ID for adding back a host-compatible ID sample */
gs->dflt_id = evlist__first_id(session->evlist);
if (!gs->dflt_id) {
pr_err("Guest data has no sample IDs");
return -EINVAL;
}
/* Temporary file for guest events */
gs->tmp_file_name = strdup(tmp_file_name);
if (!gs->tmp_file_name)
return -ENOMEM;
gs->tmp_fd = mkstemp(gs->tmp_file_name);
if (gs->tmp_fd < 0)
return -errno;
if (zstd_init(&gs->session->zstd_data, 0) < 0)
pr_warning("Guest session decompression initialization failed.\n");
/*
* perf does not support processing 2 sessions simultaneously, so output
* guest events to a temporary file.
*/
ret = perf_session__process_events(gs->session);
if (ret)
return ret;
if (lseek(gs->tmp_fd, 0, SEEK_SET))
return -errno;
return 0;
}
/* Free hlist nodes assuming hlist_node is the first member of hlist entries */
static void free_hlist(struct hlist_head *heads, size_t hlist_sz)
{
struct hlist_node *pos, *n;
size_t i;
for (i = 0; i < hlist_sz; ++i) {
hlist_for_each_safe(pos, n, &heads[i]) {
hlist_del(pos);
free(pos);
}
}
}
static void guest_session__exit(struct guest_session *gs)
{
if (gs->session) {
perf_session__delete(gs->session);
free_hlist(gs->heads, PERF_EVLIST__HLIST_SIZE);
free_hlist(gs->tids, PERF_EVLIST__HLIST_SIZE);
}
if (gs->tmp_file_name) {
if (gs->tmp_fd >= 0)
close(gs->tmp_fd);
unlink(gs->tmp_file_name);
free(gs->tmp_file_name);
}
free(gs->vcpu);
free(gs->perf_data_file);
}
static void get_tsc_conv(struct perf_tsc_conversion *tc, struct perf_record_time_conv *time_conv)
{
tc->time_shift = time_conv->time_shift;
tc->time_mult = time_conv->time_mult;
tc->time_zero = time_conv->time_zero;
tc->time_cycles = time_conv->time_cycles;
tc->time_mask = time_conv->time_mask;
tc->cap_user_time_zero = time_conv->cap_user_time_zero;
tc->cap_user_time_short = time_conv->cap_user_time_short;
}
static void guest_session__get_tc(struct guest_session *gs)
{
struct perf_inject *inject = container_of(gs, struct perf_inject, guest_session);
get_tsc_conv(&gs->host_tc, &inject->session->time_conv);
get_tsc_conv(&gs->guest_tc, &gs->session->time_conv);
}
static void guest_session__convert_time(struct guest_session *gs, u64 guest_time, u64 *host_time)
{
u64 tsc;
if (!guest_time) {
*host_time = 0;
return;
}
if (gs->guest_tc.cap_user_time_zero)
tsc = perf_time_to_tsc(guest_time, &gs->guest_tc);
else
tsc = guest_time;
/*
* This is the correct order of operations for x86 if the TSC Offset and
* Multiplier values are used.
*/
tsc -= gs->time_offset;
tsc /= gs->time_scale;
if (gs->host_tc.cap_user_time_zero)
*host_time = tsc_to_perf_time(tsc, &gs->host_tc);
else
*host_time = tsc;
}
static int guest_session__fetch(struct guest_session *gs)
{
void *buf = gs->ev.event_buf;
struct perf_event_header *hdr = buf;
size_t hdr_sz = sizeof(*hdr);
ssize_t ret;
ret = readn(gs->tmp_fd, buf, hdr_sz);
if (ret < 0)
return ret;
if (!ret) {
/* Zero size means EOF */
hdr->size = 0;
return 0;
}
buf += hdr_sz;
ret = readn(gs->tmp_fd, buf, hdr->size - hdr_sz);
if (ret < 0)
return ret;
gs->ev.event = (union perf_event *)gs->ev.event_buf;
gs->ev.sample.time = 0;
if (hdr->type >= PERF_RECORD_USER_TYPE_START) {
pr_err("Unexpected type fetching guest event");
return 0;
}
ret = evlist__parse_sample(gs->session->evlist, gs->ev.event, &gs->ev.sample);
if (ret) {
pr_err("Parse failed fetching guest event");
return ret;
}
if (!gs->have_tc) {
guest_session__get_tc(gs);
gs->have_tc = true;
}
guest_session__convert_time(gs, gs->ev.sample.time, &gs->ev.sample.time);
return 0;
}
static int evlist__append_id_sample(struct evlist *evlist, union perf_event *ev,
const struct perf_sample *sample)
{
struct evsel *evsel;
void *array;
int ret;
evsel = evlist__id2evsel(evlist, sample->id);
array = ev;
if (!evsel) {
pr_err("No evsel for id %"PRIu64"\n", sample->id);
return -EINVAL;
}
array += ev->header.size;
ret = perf_event__synthesize_id_sample(array, evsel->core.attr.sample_type, sample);
if (ret < 0)
return ret;
if (ret & 7) {
pr_err("Bad id sample size %d\n", ret);
return -EINVAL;
}
ev->header.size += ret;
return 0;
}
static int guest_session__inject_events(struct guest_session *gs, u64 timestamp)
{
struct perf_inject *inject = container_of(gs, struct perf_inject, guest_session);
int ret;
if (!gs->ready)
return 0;
while (1) {
struct perf_sample *sample;
struct guest_id *guest_id;
union perf_event *ev;
u16 id_hdr_size;
u8 cpumode;
u64 id;
if (!gs->fetched) {
ret = guest_session__fetch(gs);
if (ret)
return ret;
gs->fetched = true;
}
ev = gs->ev.event;
sample = &gs->ev.sample;
if (!ev->header.size)
return 0; /* EOF */
if (sample->time > timestamp)
return 0;
/* Change cpumode to guest */
cpumode = ev->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
if (cpumode & PERF_RECORD_MISC_USER)
cpumode = PERF_RECORD_MISC_GUEST_USER;
else
cpumode = PERF_RECORD_MISC_GUEST_KERNEL;
ev->header.misc &= ~PERF_RECORD_MISC_CPUMODE_MASK;
ev->header.misc |= cpumode;
id = sample->id;
if (!id) {
id = gs->dflt_id;
id_hdr_size = gs->dflt_id_hdr_size;
} else {
struct evsel *evsel = evlist__id2evsel(gs->session->evlist, id);
id_hdr_size = evsel__id_hdr_size(evsel);
}
if (id_hdr_size & 7) {
pr_err("Bad id_hdr_size %u\n", id_hdr_size);
return -EINVAL;
}
if (ev->header.size & 7) {
pr_err("Bad event size %u\n", ev->header.size);
return -EINVAL;
}
/* Remove guest id sample */
ev->header.size -= id_hdr_size;
if (ev->header.size & 7) {
pr_err("Bad raw event size %u\n", ev->header.size);
return -EINVAL;
}
guest_id = guest_session__lookup_id(gs, id);
if (!guest_id) {
pr_err("Guest event with unknown id %llu\n",
(unsigned long long)id);
return -EINVAL;
}
/* Change to host ID to avoid conflicting ID values */
sample->id = guest_id->host_id;
sample->stream_id = guest_id->host_id;
if (sample->cpu != (u32)-1) {
if (sample->cpu >= gs->vcpu_cnt) {
pr_err("Guest event with unknown VCPU %u\n",
sample->cpu);
return -EINVAL;
}
/* Change to host CPU instead of guest VCPU */
sample->cpu = gs->vcpu[sample->cpu].cpu;
}
/* New id sample with new ID and CPU */
ret = evlist__append_id_sample(inject->session->evlist, ev, sample);
if (ret)
return ret;
if (ev->header.size & 7) {
pr_err("Bad new event size %u\n", ev->header.size);
return -EINVAL;
}
gs->fetched = false;
ret = output_bytes(inject, ev, ev->header.size);
if (ret)
return ret;
}
}
static int guest_session__flush_events(struct guest_session *gs)
{
return guest_session__inject_events(gs, -1);
}
static int host__repipe(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct machine *machine)
{
struct perf_inject *inject = container_of(tool, struct perf_inject, tool);
int ret;
ret = guest_session__inject_events(&inject->guest_session, sample->time);
if (ret)
return ret;
return perf_event__repipe(tool, event, sample, machine);
}
static int host__finished_init(struct perf_session *session, union perf_event *event)
{
struct perf_inject *inject = container_of(session->tool, struct perf_inject, tool);
struct guest_session *gs = &inject->guest_session;
int ret;
/*
* Peek through host COMM events to find QEMU threads and the VCPU they
* are running.
*/
ret = host_peek_vm_comms(session, gs);
if (ret)
return ret;
if (!gs->vcpu_cnt) {
pr_err("No VCPU threads found for pid %u\n", gs->machine_pid);
perf inject: Add support for injecting guest sideband events Inject events from a perf.data file recorded in a virtual machine into a perf.data file recorded on the host at the same time. Only side band events (e.g. mmap, comm, fork, exit etc) and build IDs are injected. Additionally, the guest kcore_dir is copied as kcore_dir__ appended to the machine PID. This is non-trivial because: o It is not possible to process 2 sessions simultaneously so instead events are first written to a temporary file. o To avoid conflict, guest sample IDs are replaced with new unused sample IDs. o Guest event's CPU is changed to be the host CPU because it is more useful for reporting and analysis. o Sample ID is mapped to machine PID which is recorded with VCPU in the id index. This is important to allow guest events to be related to the guest machine and VCPU. o Timestamps must be converted. o Events are inserted to obey finished-round ordering. The anticipated use-case is: - start recording sideband events in a guest machine - start recording an AUX area trace on the host which can trace also the guest (e.g. Intel PT) - run test case on the guest - stop recording on the host - stop recording on the guest - copy the guest perf.data file to the host - inject the guest perf.data file sideband events into the host perf.data file using perf inject - the resulting perf.data file can now be used Subsequent patches provide Intel PT support for this. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220711093218.10967-25-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-11 09:32:07 +00:00
return -EINVAL;
}
/*
* Allocate new (unused) host sample IDs and map them to the guest IDs.
*/
gs->highest_id = evlist__find_highest_id(session->evlist);
ret = guest_session__map_ids(gs, session->evlist);
if (ret)
return ret;
ret = guest_session__add_attrs(gs);
if (ret)
return ret;
ret = synthesize_id_index(inject, gs->session->evlist->core.nr_entries);
if (ret) {
pr_err("Failed to synthesize id_index\n");
return ret;
}
ret = guest_session__add_build_ids(gs);
if (ret) {
pr_err("Failed to add guest build IDs\n");
return ret;
}
gs->ready = true;
ret = guest_session__inject_events(gs, 0);
if (ret)
return ret;
return perf_event__repipe_op2_synth(session, event);
}
/*
* Obey finished-round ordering. The FINISHED_ROUND event is first processed
* which flushes host events to file up until the last flush time. Then inject
* guest events up to the same time. Finally write out the FINISHED_ROUND event
* itself.
*/
static int host__finished_round(struct perf_tool *tool,
union perf_event *event,
struct ordered_events *oe)
{
struct perf_inject *inject = container_of(tool, struct perf_inject, tool);
int ret = perf_event__process_finished_round(tool, event, oe);
u64 timestamp = ordered_events__last_flush_time(oe);
if (ret)
return ret;
ret = guest_session__inject_events(&inject->guest_session, timestamp);
if (ret)
return ret;
return perf_event__repipe_oe_synth(tool, event, oe);
}
static int host__context_switch(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct machine *machine)
{
struct perf_inject *inject = container_of(tool, struct perf_inject, tool);
bool out = event->header.misc & PERF_RECORD_MISC_SWITCH_OUT;
struct guest_session *gs = &inject->guest_session;
u32 pid = event->context_switch.next_prev_pid;
u32 tid = event->context_switch.next_prev_tid;
struct guest_tid *guest_tid;
u32 vcpu;
if (out || pid != gs->machine_pid)
goto out;
guest_tid = guest_session__lookup_tid(gs, tid);
if (!guest_tid)
goto out;
if (sample->cpu == (u32)-1) {
pr_err("Switch event does not have CPU\n");
return -EINVAL;
}
vcpu = guest_tid->vcpu;
if (vcpu >= gs->vcpu_cnt)
return -EINVAL;
/* Guest is switching in, record which CPU the VCPU is now running on */
gs->vcpu[vcpu].cpu = sample->cpu;
out:
return host__repipe(tool, event, sample, machine);
}
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-10 22:15:03 +00:00
static void sig_handler(int sig __maybe_unused)
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
{
session_done = 1;
}
static int evsel__check_stype(struct evsel *evsel, u64 sample_type, const char *sample_msg)
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
{
libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-21 11:24:29 +00:00
struct perf_event_attr *attr = &evsel->core.attr;
const char *name = evsel__name(evsel);
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
if (!(attr->sample_type & sample_type)) {
pr_err("Samples for %s event do not have %s attribute set.",
name, sample_msg);
return -EINVAL;
}
return 0;
}
static int drop_sample(struct perf_tool *tool __maybe_unused,
union perf_event *event __maybe_unused,
struct perf_sample *sample __maybe_unused,
struct evsel *evsel __maybe_unused,
struct machine *machine __maybe_unused)
{
return 0;
}
static void strip_init(struct perf_inject *inject)
{
struct evlist *evlist = inject->session->evlist;
struct evsel *evsel;
inject->tool.context_switch = perf_event__drop;
evlist__for_each_entry(evlist, evsel)
evsel->handler = drop_sample;
}
static int parse_vm_time_correlation(const struct option *opt, const char *str, int unset)
{
struct perf_inject *inject = opt->value;
const char *args;
char *dry_run;
if (unset)
return 0;
inject->itrace_synth_opts.set = true;
inject->itrace_synth_opts.vm_time_correlation = true;
inject->in_place_update = true;
if (!str)
return 0;
dry_run = skip_spaces(str);
if (!strncmp(dry_run, "dry-run", strlen("dry-run"))) {
inject->itrace_synth_opts.vm_tm_corr_dry_run = true;
inject->in_place_update_dry_run = true;
args = dry_run + strlen("dry-run");
} else {
args = str;
}
inject->itrace_synth_opts.vm_tm_corr_args = strdup(args);
return inject->itrace_synth_opts.vm_tm_corr_args ? 0 : -ENOMEM;
}
perf inject: Add support for injecting guest sideband events Inject events from a perf.data file recorded in a virtual machine into a perf.data file recorded on the host at the same time. Only side band events (e.g. mmap, comm, fork, exit etc) and build IDs are injected. Additionally, the guest kcore_dir is copied as kcore_dir__ appended to the machine PID. This is non-trivial because: o It is not possible to process 2 sessions simultaneously so instead events are first written to a temporary file. o To avoid conflict, guest sample IDs are replaced with new unused sample IDs. o Guest event's CPU is changed to be the host CPU because it is more useful for reporting and analysis. o Sample ID is mapped to machine PID which is recorded with VCPU in the id index. This is important to allow guest events to be related to the guest machine and VCPU. o Timestamps must be converted. o Events are inserted to obey finished-round ordering. The anticipated use-case is: - start recording sideband events in a guest machine - start recording an AUX area trace on the host which can trace also the guest (e.g. Intel PT) - run test case on the guest - stop recording on the host - stop recording on the guest - copy the guest perf.data file to the host - inject the guest perf.data file sideband events into the host perf.data file using perf inject - the resulting perf.data file can now be used Subsequent patches provide Intel PT support for this. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220711093218.10967-25-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-11 09:32:07 +00:00
static int parse_guest_data(const struct option *opt, const char *str, int unset)
{
struct perf_inject *inject = opt->value;
struct guest_session *gs = &inject->guest_session;
char *tok;
char *s;
if (unset)
return 0;
if (!str)
goto bad_args;
s = strdup(str);
if (!s)
return -ENOMEM;
gs->perf_data_file = strsep(&s, ",");
if (!gs->perf_data_file)
goto bad_args;
gs->copy_kcore_dir = has_kcore_dir(gs->perf_data_file);
if (gs->copy_kcore_dir)
inject->output.is_dir = true;
tok = strsep(&s, ",");
if (!tok)
goto bad_args;
gs->machine_pid = strtoul(tok, NULL, 0);
if (!inject->guest_session.machine_pid)
goto bad_args;
gs->time_scale = 1;
tok = strsep(&s, ",");
if (!tok)
goto out;
gs->time_offset = strtoull(tok, NULL, 0);
tok = strsep(&s, ",");
if (!tok)
goto out;
gs->time_scale = strtod(tok, NULL);
if (!gs->time_scale)
goto bad_args;
out:
return 0;
bad_args:
pr_err("--guest-data option requires guest perf.data file name, "
"guest machine PID, and optionally guest timestamp offset, "
"and guest timestamp scale factor, separated by commas.\n");
return -1;
}
perf inject: Keep some features sections from input file perf inject overwrites feature sections with information from the current machine. It makes more sense to keep original information that describes the machine or software when perf record was run. Example: perf.data from "Desktop" injected on "nuc11" Before: $ perf script --header-only -i perf.data-from-desktop | head -15 # ======== # captured on : Thu May 19 09:55:50 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : Desktop # os release : 5.13.0-41-generic # perf version : 5.18.rc5.gac837f7ca7ed # arch : x86_64 # nrcpus online : 28 # nrcpus avail : 28 # cpudesc : Intel(R) Core(TM) i9-9940X CPU @ 3.30GHz # cpuid : GenuineIntel,6,85,4 # total memory : 65548656 kB $ perf inject -i perf.data-from-desktop -o injected-perf.data $ perf script --header-only -i injected-perf.data | head -15 # ======== # captured on : Fri May 20 15:06:55 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : nuc11 # os release : 5.17.5-local # perf version : 5.18.rc5.g0f828fdeb9af # arch : x86_64 # nrcpus online : 8 # nrcpus avail : 8 # cpudesc : 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz # cpuid : GenuineIntel,6,140,1 # total memory : 16012124 kB After: $ perf inject -i perf.data-from-desktop -o injected-perf.data $ perf script --header-only -i injected-perf.data | head -15 # ======== # captured on : Fri May 20 15:08:54 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : Desktop # os release : 5.13.0-41-generic # perf version : 5.18.rc5.gac837f7ca7ed # arch : x86_64 # nrcpus online : 28 # nrcpus avail : 28 # cpudesc : Intel(R) Core(TM) i9-9940X CPU @ 3.30GHz # cpuid : GenuineIntel,6,85,4 # total memory : 65548656 kB Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220520132404.25853-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-05-20 13:24:02 +00:00
static int save_section_info_cb(struct perf_file_section *section,
struct perf_header *ph __maybe_unused,
int feat, int fd __maybe_unused, void *data)
{
struct perf_inject *inject = data;
inject->secs[feat] = *section;
return 0;
}
static int save_section_info(struct perf_inject *inject)
{
struct perf_header *header = &inject->session->header;
int fd = perf_data__fd(inject->session->data);
return perf_header__process_sections(header, fd, inject, save_section_info_cb);
}
static bool keep_feat(int feat)
{
switch (feat) {
/* Keep original information that describes the machine or software */
case HEADER_TRACING_DATA:
case HEADER_HOSTNAME:
case HEADER_OSRELEASE:
case HEADER_VERSION:
case HEADER_ARCH:
case HEADER_NRCPUS:
case HEADER_CPUDESC:
case HEADER_CPUID:
case HEADER_TOTAL_MEM:
case HEADER_CPU_TOPOLOGY:
case HEADER_NUMA_TOPOLOGY:
case HEADER_PMU_MAPPINGS:
case HEADER_CACHE:
case HEADER_MEM_TOPOLOGY:
case HEADER_CLOCKID:
case HEADER_BPF_PROG_INFO:
case HEADER_BPF_BTF:
case HEADER_CPU_PMU_CAPS:
case HEADER_CLOCK_DATA:
case HEADER_HYBRID_TOPOLOGY:
2022-06-04 04:45:16 +00:00
case HEADER_PMU_CAPS:
perf inject: Keep some features sections from input file perf inject overwrites feature sections with information from the current machine. It makes more sense to keep original information that describes the machine or software when perf record was run. Example: perf.data from "Desktop" injected on "nuc11" Before: $ perf script --header-only -i perf.data-from-desktop | head -15 # ======== # captured on : Thu May 19 09:55:50 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : Desktop # os release : 5.13.0-41-generic # perf version : 5.18.rc5.gac837f7ca7ed # arch : x86_64 # nrcpus online : 28 # nrcpus avail : 28 # cpudesc : Intel(R) Core(TM) i9-9940X CPU @ 3.30GHz # cpuid : GenuineIntel,6,85,4 # total memory : 65548656 kB $ perf inject -i perf.data-from-desktop -o injected-perf.data $ perf script --header-only -i injected-perf.data | head -15 # ======== # captured on : Fri May 20 15:06:55 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : nuc11 # os release : 5.17.5-local # perf version : 5.18.rc5.g0f828fdeb9af # arch : x86_64 # nrcpus online : 8 # nrcpus avail : 8 # cpudesc : 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz # cpuid : GenuineIntel,6,140,1 # total memory : 16012124 kB After: $ perf inject -i perf.data-from-desktop -o injected-perf.data $ perf script --header-only -i injected-perf.data | head -15 # ======== # captured on : Fri May 20 15:08:54 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : Desktop # os release : 5.13.0-41-generic # perf version : 5.18.rc5.gac837f7ca7ed # arch : x86_64 # nrcpus online : 28 # nrcpus avail : 28 # cpudesc : Intel(R) Core(TM) i9-9940X CPU @ 3.30GHz # cpuid : GenuineIntel,6,85,4 # total memory : 65548656 kB Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220520132404.25853-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-05-20 13:24:02 +00:00
return true;
/* Information that can be updated */
case HEADER_BUILD_ID:
case HEADER_CMDLINE:
case HEADER_EVENT_DESC:
case HEADER_BRANCH_STACK:
case HEADER_GROUP_DESC:
case HEADER_AUXTRACE:
case HEADER_STAT:
case HEADER_SAMPLE_TIME:
case HEADER_DIR_FORMAT:
case HEADER_COMPRESSED:
default:
return false;
};
}
static int read_file(int fd, u64 offs, void *buf, size_t sz)
{
ssize_t ret = preadn(fd, buf, sz, offs);
if (ret < 0)
return -errno;
if ((size_t)ret != sz)
return -EINVAL;
return 0;
}
static int feat_copy(struct perf_inject *inject, int feat, struct feat_writer *fw)
{
int fd = perf_data__fd(inject->session->data);
u64 offs = inject->secs[feat].offset;
size_t sz = inject->secs[feat].size;
void *buf = malloc(sz);
int ret;
if (!buf)
return -ENOMEM;
ret = read_file(fd, offs, buf, sz);
if (ret)
goto out_free;
ret = fw->write(fw, buf, sz);
out_free:
free(buf);
return ret;
}
struct inject_fc {
struct feat_copier fc;
struct perf_inject *inject;
};
static int feat_copy_cb(struct feat_copier *fc, int feat, struct feat_writer *fw)
{
struct inject_fc *inj_fc = container_of(fc, struct inject_fc, fc);
struct perf_inject *inject = inj_fc->inject;
int ret;
if (!inject->secs[feat].offset ||
!keep_feat(feat))
return 0;
ret = feat_copy(inject, feat, fw);
if (ret < 0)
return ret;
return 1; /* Feature section copied */
}
static int copy_kcore_dir(struct perf_inject *inject)
{
char *cmd;
int ret;
ret = asprintf(&cmd, "cp -r -n %s/kcore_dir* %s >/dev/null 2>&1",
inject->input_name, inject->output.path);
if (ret < 0)
return ret;
pr_debug("%s\n", cmd);
ret = system(cmd);
free(cmd);
return ret;
}
perf inject: Add support for injecting guest sideband events Inject events from a perf.data file recorded in a virtual machine into a perf.data file recorded on the host at the same time. Only side band events (e.g. mmap, comm, fork, exit etc) and build IDs are injected. Additionally, the guest kcore_dir is copied as kcore_dir__ appended to the machine PID. This is non-trivial because: o It is not possible to process 2 sessions simultaneously so instead events are first written to a temporary file. o To avoid conflict, guest sample IDs are replaced with new unused sample IDs. o Guest event's CPU is changed to be the host CPU because it is more useful for reporting and analysis. o Sample ID is mapped to machine PID which is recorded with VCPU in the id index. This is important to allow guest events to be related to the guest machine and VCPU. o Timestamps must be converted. o Events are inserted to obey finished-round ordering. The anticipated use-case is: - start recording sideband events in a guest machine - start recording an AUX area trace on the host which can trace also the guest (e.g. Intel PT) - run test case on the guest - stop recording on the host - stop recording on the guest - copy the guest perf.data file to the host - inject the guest perf.data file sideband events into the host perf.data file using perf inject - the resulting perf.data file can now be used Subsequent patches provide Intel PT support for this. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220711093218.10967-25-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-11 09:32:07 +00:00
static int guest_session__copy_kcore_dir(struct guest_session *gs)
{
struct perf_inject *inject = container_of(gs, struct perf_inject, guest_session);
char *cmd;
int ret;
ret = asprintf(&cmd, "cp -r -n %s/kcore_dir %s/kcore_dir__%u >/dev/null 2>&1",
gs->perf_data_file, inject->output.path, gs->machine_pid);
if (ret < 0)
return ret;
pr_debug("%s\n", cmd);
ret = system(cmd);
free(cmd);
return ret;
}
perf inject: Fix segfault due to perf_data__fd() without open The fixed commit attempts to get the output file descriptor even if the file was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. __GI___fileno (fp=0x0) at fileno.c:35 35 fileno.c: No such file or directory. (gdb) bt #0 __GI___fileno (fp=0x0) at fileno.c:35 #1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72 #2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69 #3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017 #4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313 #5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539 (gdb) Fixes: 0ae03893623dd1dd ("perf tools: Pass a fd to perf_file_header__read_pipe()") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211213084829.114772-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-13 08:48:29 +00:00
static int output_fd(struct perf_inject *inject)
{
return inject->in_place_update ? -1 : perf_data__fd(&inject->output);
}
static int __cmd_inject(struct perf_inject *inject)
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
{
int ret = -EINVAL;
perf inject: Add support for injecting guest sideband events Inject events from a perf.data file recorded in a virtual machine into a perf.data file recorded on the host at the same time. Only side band events (e.g. mmap, comm, fork, exit etc) and build IDs are injected. Additionally, the guest kcore_dir is copied as kcore_dir__ appended to the machine PID. This is non-trivial because: o It is not possible to process 2 sessions simultaneously so instead events are first written to a temporary file. o To avoid conflict, guest sample IDs are replaced with new unused sample IDs. o Guest event's CPU is changed to be the host CPU because it is more useful for reporting and analysis. o Sample ID is mapped to machine PID which is recorded with VCPU in the id index. This is important to allow guest events to be related to the guest machine and VCPU. o Timestamps must be converted. o Events are inserted to obey finished-round ordering. The anticipated use-case is: - start recording sideband events in a guest machine - start recording an AUX area trace on the host which can trace also the guest (e.g. Intel PT) - run test case on the guest - stop recording on the host - stop recording on the guest - copy the guest perf.data file to the host - inject the guest perf.data file sideband events into the host perf.data file using perf inject - the resulting perf.data file can now be used Subsequent patches provide Intel PT support for this. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220711093218.10967-25-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-11 09:32:07 +00:00
struct guest_session *gs = &inject->guest_session;
struct perf_session *session = inject->session;
perf inject: Fix segfault due to perf_data__fd() without open The fixed commit attempts to get the output file descriptor even if the file was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. __GI___fileno (fp=0x0) at fileno.c:35 35 fileno.c: No such file or directory. (gdb) bt #0 __GI___fileno (fp=0x0) at fileno.c:35 #1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72 #2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69 #3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017 #4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313 #5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539 (gdb) Fixes: 0ae03893623dd1dd ("perf tools: Pass a fd to perf_file_header__read_pipe()") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211213084829.114772-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-13 08:48:29 +00:00
int fd = output_fd(inject);
u64 output_data_offset;
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
signal(SIGINT, sig_handler);
if (inject->build_ids || inject->sched_stat ||
inject->itrace_synth_opts.set || inject->build_id_all) {
inject->tool.mmap = perf_event__repipe_mmap;
inject->tool.mmap2 = perf_event__repipe_mmap2;
inject->tool.fork = perf_event__repipe_fork;
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 22:59:39 +00:00
#ifdef HAVE_LIBTRACEEVENT
inject->tool.tracing_data = perf_event__repipe_tracing_data;
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 22:59:39 +00:00
#endif
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
}
output_data_offset = perf_session__data_offset(session->evlist);
if (inject->build_id_all) {
inject->tool.mmap = perf_event__repipe_buildid_mmap;
inject->tool.mmap2 = perf_event__repipe_buildid_mmap2;
} else if (inject->build_ids) {
inject->tool.sample = perf_event__inject_buildid;
} else if (inject->sched_stat) {
struct evsel *evsel;
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
evlist__for_each_entry(session->evlist, evsel) {
const char *name = evsel__name(evsel);
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
if (!strcmp(name, "sched:sched_switch")) {
if (evsel__check_stype(evsel, PERF_SAMPLE_TID, "TID"))
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
return -EINVAL;
evsel->handler = perf_inject__sched_switch;
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
} else if (!strcmp(name, "sched:sched_process_exit"))
evsel->handler = perf_inject__sched_process_exit;
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 22:59:39 +00:00
#ifdef HAVE_LIBTRACEEVENT
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
else if (!strncmp(name, "sched:sched_stat_", 17))
evsel->handler = perf_inject__sched_stat;
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 22:59:39 +00:00
#endif
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
}
} else if (inject->itrace_synth_opts.vm_time_correlation) {
session->itrace_synth_opts = &inject->itrace_synth_opts;
memset(&inject->tool, 0, sizeof(inject->tool));
inject->tool.id_index = perf_event__process_id_index;
inject->tool.auxtrace_info = perf_event__process_auxtrace_info;
inject->tool.auxtrace = perf_event__process_auxtrace;
inject->tool.auxtrace_error = perf_event__process_auxtrace_error;
inject->tool.ordered_events = true;
inject->tool.ordering_requires_timestamps = true;
} else if (inject->itrace_synth_opts.set) {
session->itrace_synth_opts = &inject->itrace_synth_opts;
inject->itrace_synth_opts.inject = true;
inject->tool.comm = perf_event__repipe_comm;
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-07 20:41:43 +00:00
inject->tool.namespaces = perf_event__repipe_namespaces;
inject->tool.exit = perf_event__repipe_exit;
inject->tool.id_index = perf_event__process_id_index;
inject->tool.auxtrace_info = perf_event__process_auxtrace_info;
inject->tool.auxtrace = perf_event__process_auxtrace;
inject->tool.aux = perf_event__drop_aux;
inject->tool.itrace_start = perf_event__drop_aux;
inject->tool.aux_output_hw_id = perf_event__drop_aux;
inject->tool.ordered_events = true;
inject->tool.ordering_requires_timestamps = true;
/* Allow space in the header for new attributes */
output_data_offset = roundup(8192 + session->header.data_offset, 4096);
if (inject->strip)
strip_init(inject);
perf inject: Add support for injecting guest sideband events Inject events from a perf.data file recorded in a virtual machine into a perf.data file recorded on the host at the same time. Only side band events (e.g. mmap, comm, fork, exit etc) and build IDs are injected. Additionally, the guest kcore_dir is copied as kcore_dir__ appended to the machine PID. This is non-trivial because: o It is not possible to process 2 sessions simultaneously so instead events are first written to a temporary file. o To avoid conflict, guest sample IDs are replaced with new unused sample IDs. o Guest event's CPU is changed to be the host CPU because it is more useful for reporting and analysis. o Sample ID is mapped to machine PID which is recorded with VCPU in the id index. This is important to allow guest events to be related to the guest machine and VCPU. o Timestamps must be converted. o Events are inserted to obey finished-round ordering. The anticipated use-case is: - start recording sideband events in a guest machine - start recording an AUX area trace on the host which can trace also the guest (e.g. Intel PT) - run test case on the guest - stop recording on the host - stop recording on the guest - copy the guest perf.data file to the host - inject the guest perf.data file sideband events into the host perf.data file using perf inject - the resulting perf.data file can now be used Subsequent patches provide Intel PT support for this. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220711093218.10967-25-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-11 09:32:07 +00:00
} else if (gs->perf_data_file) {
char *name = gs->perf_data_file;
/*
* Not strictly necessary, but keep these events in order wrt
* guest events.
*/
inject->tool.mmap = host__repipe;
inject->tool.mmap2 = host__repipe;
inject->tool.comm = host__repipe;
inject->tool.fork = host__repipe;
inject->tool.exit = host__repipe;
inject->tool.lost = host__repipe;
inject->tool.context_switch = host__repipe;
inject->tool.ksymbol = host__repipe;
inject->tool.text_poke = host__repipe;
/*
* Once the host session has initialized, set up sample ID
* mapping and feed in guest attrs, build IDs and initial
* events.
*/
inject->tool.finished_init = host__finished_init;
/* Obey finished round ordering */
inject->tool.finished_round = host__finished_round,
/* Keep track of which CPU a VCPU is runnng on */
inject->tool.context_switch = host__context_switch;
/*
* Must order events to be able to obey finished round
* ordering.
*/
inject->tool.ordered_events = true;
inject->tool.ordering_requires_timestamps = true;
/* Set up a separate session to process guest perf.data file */
ret = guest_session__start(gs, name, session->data->force);
if (ret) {
pr_err("Failed to process %s, error %d\n", name, ret);
return ret;
}
/* Allow space in the header for guest attributes */
output_data_offset += gs->session->header.data_offset;
output_data_offset = roundup(output_data_offset, 4096);
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
}
if (!inject->itrace_synth_opts.set)
auxtrace_index__free(&session->auxtrace_index);
if (!inject->is_pipe && !inject->in_place_update)
lseek(fd, output_data_offset, SEEK_SET);
ret = perf_session__process_events(session);
if (ret)
return ret;
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
perf inject: Add support for injecting guest sideband events Inject events from a perf.data file recorded in a virtual machine into a perf.data file recorded on the host at the same time. Only side band events (e.g. mmap, comm, fork, exit etc) and build IDs are injected. Additionally, the guest kcore_dir is copied as kcore_dir__ appended to the machine PID. This is non-trivial because: o It is not possible to process 2 sessions simultaneously so instead events are first written to a temporary file. o To avoid conflict, guest sample IDs are replaced with new unused sample IDs. o Guest event's CPU is changed to be the host CPU because it is more useful for reporting and analysis. o Sample ID is mapped to machine PID which is recorded with VCPU in the id index. This is important to allow guest events to be related to the guest machine and VCPU. o Timestamps must be converted. o Events are inserted to obey finished-round ordering. The anticipated use-case is: - start recording sideband events in a guest machine - start recording an AUX area trace on the host which can trace also the guest (e.g. Intel PT) - run test case on the guest - stop recording on the host - stop recording on the guest - copy the guest perf.data file to the host - inject the guest perf.data file sideband events into the host perf.data file using perf inject - the resulting perf.data file can now be used Subsequent patches provide Intel PT support for this. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220711093218.10967-25-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-11 09:32:07 +00:00
if (gs->session) {
/*
* Remaining guest events have later timestamps. Flush them
* out to file.
*/
ret = guest_session__flush_events(gs);
if (ret) {
pr_err("Failed to flush guest events\n");
return ret;
}
}
if (!inject->is_pipe && !inject->in_place_update) {
perf inject: Keep some features sections from input file perf inject overwrites feature sections with information from the current machine. It makes more sense to keep original information that describes the machine or software when perf record was run. Example: perf.data from "Desktop" injected on "nuc11" Before: $ perf script --header-only -i perf.data-from-desktop | head -15 # ======== # captured on : Thu May 19 09:55:50 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : Desktop # os release : 5.13.0-41-generic # perf version : 5.18.rc5.gac837f7ca7ed # arch : x86_64 # nrcpus online : 28 # nrcpus avail : 28 # cpudesc : Intel(R) Core(TM) i9-9940X CPU @ 3.30GHz # cpuid : GenuineIntel,6,85,4 # total memory : 65548656 kB $ perf inject -i perf.data-from-desktop -o injected-perf.data $ perf script --header-only -i injected-perf.data | head -15 # ======== # captured on : Fri May 20 15:06:55 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : nuc11 # os release : 5.17.5-local # perf version : 5.18.rc5.g0f828fdeb9af # arch : x86_64 # nrcpus online : 8 # nrcpus avail : 8 # cpudesc : 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz # cpuid : GenuineIntel,6,140,1 # total memory : 16012124 kB After: $ perf inject -i perf.data-from-desktop -o injected-perf.data $ perf script --header-only -i injected-perf.data | head -15 # ======== # captured on : Fri May 20 15:08:54 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : Desktop # os release : 5.13.0-41-generic # perf version : 5.18.rc5.gac837f7ca7ed # arch : x86_64 # nrcpus online : 28 # nrcpus avail : 28 # cpudesc : Intel(R) Core(TM) i9-9940X CPU @ 3.30GHz # cpuid : GenuineIntel,6,85,4 # total memory : 65548656 kB Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220520132404.25853-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-05-20 13:24:02 +00:00
struct inject_fc inj_fc = {
.fc.copy = feat_copy_cb,
.inject = inject,
};
if (inject->build_ids)
perf_header__set_feat(&session->header,
HEADER_BUILD_ID);
/*
* Keep all buildids when there is unprocessed AUX data because
* it is not known which ones the AUX trace hits.
*/
if (perf_header__has_feat(&session->header, HEADER_BUILD_ID) &&
inject->have_auxtrace && !inject->itrace_synth_opts.set)
dsos__hit_all(session);
/*
* The AUX areas have been removed and replaced with
perf inject: Fix file corruption due to event deletion "perf inject" can create corrupt files when synthesizing sample events from AUX data. This happens when in the input file, the first event (for the AUX data) has a different sample_type from the second event (generally dummy). Specifically, they differ in the bits that indicate the standard fields appended to perf records in the mmap buffer. "perf inject" deletes the first event and moves up the second event to first position. The problem is with the synthetic PERF_RECORD_MMAP (etc.) events created by "perf record". Since these are synthetic versions of events which are normally produced by the kernel, they have to have the standard fields appended as described by sample_type. "perf record" fills these in with zeroes, including the IDENTIFIER field; perf readers interpret records with zero IDENTIFIER using the descriptor for the first event in the file. Since "perf inject" changes the first event, these synthetic records are then processed with the wrong value of sample_type, and the perf reader reads bad data, reports on incorrect length records etc. Mismatching sample_types are seen with "perf record -e cs_etm//", where the AUX event has TID|TIME|CPU|IDENTIFIER and the dummy event has TID|TIME|IDENTIFIER. Perhaps they could be the same, but it isn't normally a problem if they aren't - perf has no problems reading the file. The sample_types have to agree on the position of IDENTIFIER, because that's how perf finds the right event descriptor in the first place, but they don't normally have to agree on other fields, and perf doesn't check that they do. The problem is specific to the way "perf inject" reorganizes the events and the way synthetic MMAP events are recorded with a zero identifier. A simple solution is to stop "perf inject" deleting the tracing event. Committer testing Removed the now unused 'evsel' variable, update the comment about the evsel removal not being performed anymore, and apply the patch manually as it failed with this warning: warning: Patch sent with format=flowed; space at the end of lines might be lost. Testing it with: $ perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 8.543 msec (+- 0.130 msec) Average time per event: 0.838 usec (+- 0.013 usec) Average memory usage: 12717 KB (+- 9 KB) Average build-id-all injection took: 5.710 msec (+- 0.058 msec) Average time per event: 0.560 usec (+- 0.006 usec) Average memory usage: 12079 KB (+- 7 KB) $ Signed-off-by: Al Grant <al.grant@arm.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> LPU-Reference: b9cf5611-daae-2390-3439-6617f8f0a34b@foss.arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-13 20:38:26 +00:00
* synthesized hardware events, so clear the feature flag.
*/
if (inject->itrace_synth_opts.set) {
perf_header__clear_feat(&session->header,
HEADER_AUXTRACE);
if (inject->itrace_synth_opts.last_branch ||
inject->itrace_synth_opts.add_last_branch)
perf_header__set_feat(&session->header,
HEADER_BRANCH_STACK);
}
session->header.data_offset = output_data_offset;
session->header.data_size = inject->bytes_written;
perf inject: Keep some features sections from input file perf inject overwrites feature sections with information from the current machine. It makes more sense to keep original information that describes the machine or software when perf record was run. Example: perf.data from "Desktop" injected on "nuc11" Before: $ perf script --header-only -i perf.data-from-desktop | head -15 # ======== # captured on : Thu May 19 09:55:50 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : Desktop # os release : 5.13.0-41-generic # perf version : 5.18.rc5.gac837f7ca7ed # arch : x86_64 # nrcpus online : 28 # nrcpus avail : 28 # cpudesc : Intel(R) Core(TM) i9-9940X CPU @ 3.30GHz # cpuid : GenuineIntel,6,85,4 # total memory : 65548656 kB $ perf inject -i perf.data-from-desktop -o injected-perf.data $ perf script --header-only -i injected-perf.data | head -15 # ======== # captured on : Fri May 20 15:06:55 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : nuc11 # os release : 5.17.5-local # perf version : 5.18.rc5.g0f828fdeb9af # arch : x86_64 # nrcpus online : 8 # nrcpus avail : 8 # cpudesc : 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz # cpuid : GenuineIntel,6,140,1 # total memory : 16012124 kB After: $ perf inject -i perf.data-from-desktop -o injected-perf.data $ perf script --header-only -i injected-perf.data | head -15 # ======== # captured on : Fri May 20 15:08:54 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : Desktop # os release : 5.13.0-41-generic # perf version : 5.18.rc5.gac837f7ca7ed # arch : x86_64 # nrcpus online : 28 # nrcpus avail : 28 # cpudesc : Intel(R) Core(TM) i9-9940X CPU @ 3.30GHz # cpuid : GenuineIntel,6,85,4 # total memory : 65548656 kB Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220520132404.25853-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-05-20 13:24:02 +00:00
perf_session__inject_header(session, session->evlist, fd, &inj_fc.fc);
if (inject->copy_kcore_dir) {
ret = copy_kcore_dir(inject);
perf inject: Add support for injecting guest sideband events Inject events from a perf.data file recorded in a virtual machine into a perf.data file recorded on the host at the same time. Only side band events (e.g. mmap, comm, fork, exit etc) and build IDs are injected. Additionally, the guest kcore_dir is copied as kcore_dir__ appended to the machine PID. This is non-trivial because: o It is not possible to process 2 sessions simultaneously so instead events are first written to a temporary file. o To avoid conflict, guest sample IDs are replaced with new unused sample IDs. o Guest event's CPU is changed to be the host CPU because it is more useful for reporting and analysis. o Sample ID is mapped to machine PID which is recorded with VCPU in the id index. This is important to allow guest events to be related to the guest machine and VCPU. o Timestamps must be converted. o Events are inserted to obey finished-round ordering. The anticipated use-case is: - start recording sideband events in a guest machine - start recording an AUX area trace on the host which can trace also the guest (e.g. Intel PT) - run test case on the guest - stop recording on the host - stop recording on the guest - copy the guest perf.data file to the host - inject the guest perf.data file sideband events into the host perf.data file using perf inject - the resulting perf.data file can now be used Subsequent patches provide Intel PT support for this. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220711093218.10967-25-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-11 09:32:07 +00:00
if (ret) {
pr_err("Failed to copy kcore\n");
return ret;
perf inject: Add support for injecting guest sideband events Inject events from a perf.data file recorded in a virtual machine into a perf.data file recorded on the host at the same time. Only side band events (e.g. mmap, comm, fork, exit etc) and build IDs are injected. Additionally, the guest kcore_dir is copied as kcore_dir__ appended to the machine PID. This is non-trivial because: o It is not possible to process 2 sessions simultaneously so instead events are first written to a temporary file. o To avoid conflict, guest sample IDs are replaced with new unused sample IDs. o Guest event's CPU is changed to be the host CPU because it is more useful for reporting and analysis. o Sample ID is mapped to machine PID which is recorded with VCPU in the id index. This is important to allow guest events to be related to the guest machine and VCPU. o Timestamps must be converted. o Events are inserted to obey finished-round ordering. The anticipated use-case is: - start recording sideband events in a guest machine - start recording an AUX area trace on the host which can trace also the guest (e.g. Intel PT) - run test case on the guest - stop recording on the host - stop recording on the guest - copy the guest perf.data file to the host - inject the guest perf.data file sideband events into the host perf.data file using perf inject - the resulting perf.data file can now be used Subsequent patches provide Intel PT support for this. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220711093218.10967-25-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-11 09:32:07 +00:00
}
}
if (gs->copy_kcore_dir) {
ret = guest_session__copy_kcore_dir(gs);
if (ret) {
pr_err("Failed to copy guest kcore\n");
return ret;
}
}
}
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
return ret;
}
int cmd_inject(int argc, const char **argv)
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
{
struct perf_inject inject = {
.tool = {
.sample = perf_event__repipe_sample,
.read = perf_event__repipe_sample,
.mmap = perf_event__repipe,
.mmap2 = perf_event__repipe,
.comm = perf_event__repipe,
.namespaces = perf_event__repipe,
.cgroup = perf_event__repipe,
.fork = perf_event__repipe,
.exit = perf_event__repipe,
.lost = perf_event__repipe,
.lost_samples = perf_event__repipe,
.aux = perf_event__repipe,
.itrace_start = perf_event__repipe,
.aux_output_hw_id = perf_event__repipe,
.context_switch = perf_event__repipe,
.throttle = perf_event__repipe,
.unthrottle = perf_event__repipe,
.ksymbol = perf_event__repipe,
.bpf = perf_event__repipe,
.text_poke = perf_event__repipe,
.attr = perf_event__repipe_attr,
.event_update = perf_event__repipe_event_update,
.tracing_data = perf_event__repipe_op2_synth,
.finished_round = perf_event__repipe_oe_synth,
.build_id = perf_event__repipe_op2_synth,
perf tools: Add id index Add an index of the event identifiers, in preparation for Intel PT. The event id (also called the sample id) is a unique number allocated by the kernel to the event created by perf_event_open(). Events can include the event id by having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER. Currently the main use of the event id is to match an event back to the evsel to which it belongs i.e. perf_evlist__id2evsel() The purpose of this patch is to make it possible to match an event back to the mmap from which it was read. The reason that is useful is because the mmap represents a time-ordered context (either for a cpu or for a thread). Intel PT decodes trace information on that basis. In full-trace mode, that information can be recorded when the Intel PT trace is read, but in sample-mode the Intel PT trace data is embedded in a sample and it is in that case that the "id index" is needed. So the mmaps are numbered (idx) and the cpu and tid recorded against the id by perf_evlist__set_sid_idx() which is called by perf_evlist__mmap_per_evsel(). That information is recorded on the perf.data file in the new "id index". idx, cpu and tid are added to struct perf_sample_id (which is the node of evlist's hash table to match ids to evsels). The information can be retrieved using perf_evlist__id2sid(). Note however this all depends on having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER, otherwise ids are not recorded. The "id index" is a synthesized event record which will be created when Intel PT sampling is used by calling perf_event__synthesize_id_index(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1414417770-18602-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-27 13:49:22 +00:00
.id_index = perf_event__repipe_op2_synth,
.auxtrace_info = perf_event__repipe_op2_synth,
.auxtrace_error = perf_event__repipe_op2_synth,
.time_conv = perf_event__repipe_op2_synth,
.thread_map = perf_event__repipe_op2_synth,
.cpu_map = perf_event__repipe_op2_synth,
.stat_config = perf_event__repipe_op2_synth,
.stat = perf_event__repipe_op2_synth,
.stat_round = perf_event__repipe_op2_synth,
perf tools: Add feature header record to pipe-mode Add header record types to pipe-mode, reusing the functions used in file-mode and leveraging the new struct feat_fd. For alignment, check that synthesized events don't exceed pagesize. Add the perf_event__synthesize_feature event call back to process the new header records. Before this patch: $ perf record -o - -e cycles sleep 1 | perf report --stdio --header [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] ... After this patch: $ perf record -o - -e cycles sleep 1 | perf report --stdio --header # ======== # captured on: Mon May 22 16:33:43 2017 # ======== # # hostname : my_hostname # os release : 4.11.0-dbx-up_perf # perf version : 4.11.rc6.g6277c80 # arch : x86_64 # nrcpus online : 72 # nrcpus avail : 72 # cpudesc : Intel(R) Xeon(R) CPU E5-2696 v3 @ 2.30GHz # cpuid : GenuineIntel,6,63,2 # total memory : 263457192 kB # cmdline : /root/perf record -o - -e cycles -c 100000 sleep 1 # HEADER_CPU_TOPOLOGY info available, use -I to display # HEADER_NUMA_TOPOLOGY info available, use -I to display # pmu mappings: intel_bts = 6, uncore_imc_4 = 22, uncore_sbox_1 = 47, uncore_cbox_5 = 33, uncore_ha_0 = 16, uncore_cbox [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] ... Support added for the subcommands: report, inject, annotate and script. Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20170718042549.145161-16-davidcc@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-18 04:25:48 +00:00
.feature = perf_event__repipe_op2_synth,
.finished_init = perf_event__repipe_op2_synth,
.compressed = perf_event__repipe_op4_synth,
.auxtrace = perf_event__repipe_auxtrace,
},
.input_name = "-",
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
.samples = LIST_HEAD_INIT(inject.samples),
.output = {
.path = "-",
.mode = PERF_DATA_MODE_WRITE,
perf data: Allow to use stdio functions for pipe mode When perf data is in a pipe, it reads each event separately using read(2) syscall. This is a huge performance bottleneck when processing large data like in perf inject. Also perf inject needs to use write(2) syscall for the output. So convert it to use buffer I/O functions in stdio library for pipe data. This makes inject-build-id bench time drops from 20ms to 8ms. $ perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 8.074 msec (+- 0.013 msec) Average time per event: 0.792 usec (+- 0.001 usec) Average memory usage: 8328 KB (+- 0 KB) Average build-id-all injection took: 5.490 msec (+- 0.008 msec) Average time per event: 0.538 usec (+- 0.001 usec) Average memory usage: 7563 KB (+- 0 KB) This patch enables it just for perf inject when used with pipe (it's a default behavior). Maybe we could do it for perf record and/or report later.. Committer testing: Before: $ perf stat -r 5 perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 13.605 msec (+- 0.064 msec) Average time per event: 1.334 usec (+- 0.006 usec) Average memory usage: 12220 KB (+- 7 KB) Average build-id-all injection took: 11.458 msec (+- 0.058 msec) Average time per event: 1.123 usec (+- 0.006 usec) Average memory usage: 11546 KB (+- 8 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 13.673 msec (+- 0.057 msec) Average time per event: 1.341 usec (+- 0.006 usec) Average memory usage: 12508 KB (+- 8 KB) Average build-id-all injection took: 11.437 msec (+- 0.046 msec) Average time per event: 1.121 usec (+- 0.004 usec) Average memory usage: 11812 KB (+- 7 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 13.641 msec (+- 0.069 msec) Average time per event: 1.337 usec (+- 0.007 usec) Average memory usage: 12302 KB (+- 8 KB) Average build-id-all injection took: 10.820 msec (+- 0.106 msec) Average time per event: 1.061 usec (+- 0.010 usec) Average memory usage: 11616 KB (+- 7 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 13.379 msec (+- 0.074 msec) Average time per event: 1.312 usec (+- 0.007 usec) Average memory usage: 12334 KB (+- 8 KB) Average build-id-all injection took: 11.288 msec (+- 0.071 msec) Average time per event: 1.107 usec (+- 0.007 usec) Average memory usage: 11657 KB (+- 8 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 13.534 msec (+- 0.058 msec) Average time per event: 1.327 usec (+- 0.006 usec) Average memory usage: 12264 KB (+- 8 KB) Average build-id-all injection took: 11.557 msec (+- 0.076 msec) Average time per event: 1.133 usec (+- 0.007 usec) Average memory usage: 11593 KB (+- 8 KB) Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 4,060.05 msec task-clock:u # 1.566 CPUs utilized ( +- 0.65% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 101,888 page-faults:u # 0.025 M/sec ( +- 0.12% ) 3,745,833,163 cycles:u # 0.923 GHz ( +- 0.10% ) (83.22%) 194,346,613 stalled-cycles-frontend:u # 5.19% frontend cycles idle ( +- 0.57% ) (83.30%) 708,495,034 stalled-cycles-backend:u # 18.91% backend cycles idle ( +- 0.48% ) (83.48%) 5,629,328,628 instructions:u # 1.50 insn per cycle # 0.13 stalled cycles per insn ( +- 0.21% ) (83.57%) 1,236,697,927 branches:u # 304.602 M/sec ( +- 0.16% ) (83.44%) 17,564,877 branch-misses:u # 1.42% of all branches ( +- 0.23% ) (82.99%) 2.5934 +- 0.0128 seconds time elapsed ( +- 0.49% ) $ After: $ perf stat -r 5 perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 8.560 msec (+- 0.125 msec) Average time per event: 0.839 usec (+- 0.012 usec) Average memory usage: 12520 KB (+- 8 KB) Average build-id-all injection took: 5.789 msec (+- 0.054 msec) Average time per event: 0.568 usec (+- 0.005 usec) Average memory usage: 11919 KB (+- 9 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 8.639 msec (+- 0.111 msec) Average time per event: 0.847 usec (+- 0.011 usec) Average memory usage: 12732 KB (+- 8 KB) Average build-id-all injection took: 5.647 msec (+- 0.069 msec) Average time per event: 0.554 usec (+- 0.007 usec) Average memory usage: 12093 KB (+- 7 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 8.551 msec (+- 0.096 msec) Average time per event: 0.838 usec (+- 0.009 usec) Average memory usage: 12739 KB (+- 8 KB) Average build-id-all injection took: 5.617 msec (+- 0.061 msec) Average time per event: 0.551 usec (+- 0.006 usec) Average memory usage: 12105 KB (+- 7 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 8.403 msec (+- 0.097 msec) Average time per event: 0.824 usec (+- 0.010 usec) Average memory usage: 12770 KB (+- 8 KB) Average build-id-all injection took: 5.611 msec (+- 0.085 msec) Average time per event: 0.550 usec (+- 0.008 usec) Average memory usage: 12134 KB (+- 8 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 8.518 msec (+- 0.102 msec) Average time per event: 0.835 usec (+- 0.010 usec) Average memory usage: 12518 KB (+- 10 KB) Average build-id-all injection took: 5.503 msec (+- 0.073 msec) Average time per event: 0.540 usec (+- 0.007 usec) Average memory usage: 11882 KB (+- 8 KB) Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 2,394.88 msec task-clock:u # 1.577 CPUs utilized ( +- 0.83% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 103,181 page-faults:u # 0.043 M/sec ( +- 0.11% ) 3,548,172,030 cycles:u # 1.482 GHz ( +- 0.30% ) (83.26%) 81,537,700 stalled-cycles-frontend:u # 2.30% frontend cycles idle ( +- 1.54% ) (83.24%) 876,631,544 stalled-cycles-backend:u # 24.71% backend cycles idle ( +- 1.14% ) (83.45%) 5,960,361,707 instructions:u # 1.68 insn per cycle # 0.15 stalled cycles per insn ( +- 0.27% ) (83.26%) 1,269,413,491 branches:u # 530.054 M/sec ( +- 0.10% ) (83.48%) 11,372,453 branch-misses:u # 0.90% of all branches ( +- 0.52% ) (83.31%) 1.51874 +- 0.00642 seconds time elapsed ( +- 0.42% ) $ Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20201030054742.87740-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-30 05:47:42 +00:00
.use_stdio = true,
},
};
struct perf_data data = {
.mode = PERF_DATA_MODE_READ,
perf data: Allow to use stdio functions for pipe mode When perf data is in a pipe, it reads each event separately using read(2) syscall. This is a huge performance bottleneck when processing large data like in perf inject. Also perf inject needs to use write(2) syscall for the output. So convert it to use buffer I/O functions in stdio library for pipe data. This makes inject-build-id bench time drops from 20ms to 8ms. $ perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 8.074 msec (+- 0.013 msec) Average time per event: 0.792 usec (+- 0.001 usec) Average memory usage: 8328 KB (+- 0 KB) Average build-id-all injection took: 5.490 msec (+- 0.008 msec) Average time per event: 0.538 usec (+- 0.001 usec) Average memory usage: 7563 KB (+- 0 KB) This patch enables it just for perf inject when used with pipe (it's a default behavior). Maybe we could do it for perf record and/or report later.. Committer testing: Before: $ perf stat -r 5 perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 13.605 msec (+- 0.064 msec) Average time per event: 1.334 usec (+- 0.006 usec) Average memory usage: 12220 KB (+- 7 KB) Average build-id-all injection took: 11.458 msec (+- 0.058 msec) Average time per event: 1.123 usec (+- 0.006 usec) Average memory usage: 11546 KB (+- 8 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 13.673 msec (+- 0.057 msec) Average time per event: 1.341 usec (+- 0.006 usec) Average memory usage: 12508 KB (+- 8 KB) Average build-id-all injection took: 11.437 msec (+- 0.046 msec) Average time per event: 1.121 usec (+- 0.004 usec) Average memory usage: 11812 KB (+- 7 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 13.641 msec (+- 0.069 msec) Average time per event: 1.337 usec (+- 0.007 usec) Average memory usage: 12302 KB (+- 8 KB) Average build-id-all injection took: 10.820 msec (+- 0.106 msec) Average time per event: 1.061 usec (+- 0.010 usec) Average memory usage: 11616 KB (+- 7 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 13.379 msec (+- 0.074 msec) Average time per event: 1.312 usec (+- 0.007 usec) Average memory usage: 12334 KB (+- 8 KB) Average build-id-all injection took: 11.288 msec (+- 0.071 msec) Average time per event: 1.107 usec (+- 0.007 usec) Average memory usage: 11657 KB (+- 8 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 13.534 msec (+- 0.058 msec) Average time per event: 1.327 usec (+- 0.006 usec) Average memory usage: 12264 KB (+- 8 KB) Average build-id-all injection took: 11.557 msec (+- 0.076 msec) Average time per event: 1.133 usec (+- 0.007 usec) Average memory usage: 11593 KB (+- 8 KB) Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 4,060.05 msec task-clock:u # 1.566 CPUs utilized ( +- 0.65% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 101,888 page-faults:u # 0.025 M/sec ( +- 0.12% ) 3,745,833,163 cycles:u # 0.923 GHz ( +- 0.10% ) (83.22%) 194,346,613 stalled-cycles-frontend:u # 5.19% frontend cycles idle ( +- 0.57% ) (83.30%) 708,495,034 stalled-cycles-backend:u # 18.91% backend cycles idle ( +- 0.48% ) (83.48%) 5,629,328,628 instructions:u # 1.50 insn per cycle # 0.13 stalled cycles per insn ( +- 0.21% ) (83.57%) 1,236,697,927 branches:u # 304.602 M/sec ( +- 0.16% ) (83.44%) 17,564,877 branch-misses:u # 1.42% of all branches ( +- 0.23% ) (82.99%) 2.5934 +- 0.0128 seconds time elapsed ( +- 0.49% ) $ After: $ perf stat -r 5 perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 8.560 msec (+- 0.125 msec) Average time per event: 0.839 usec (+- 0.012 usec) Average memory usage: 12520 KB (+- 8 KB) Average build-id-all injection took: 5.789 msec (+- 0.054 msec) Average time per event: 0.568 usec (+- 0.005 usec) Average memory usage: 11919 KB (+- 9 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 8.639 msec (+- 0.111 msec) Average time per event: 0.847 usec (+- 0.011 usec) Average memory usage: 12732 KB (+- 8 KB) Average build-id-all injection took: 5.647 msec (+- 0.069 msec) Average time per event: 0.554 usec (+- 0.007 usec) Average memory usage: 12093 KB (+- 7 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 8.551 msec (+- 0.096 msec) Average time per event: 0.838 usec (+- 0.009 usec) Average memory usage: 12739 KB (+- 8 KB) Average build-id-all injection took: 5.617 msec (+- 0.061 msec) Average time per event: 0.551 usec (+- 0.006 usec) Average memory usage: 12105 KB (+- 7 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 8.403 msec (+- 0.097 msec) Average time per event: 0.824 usec (+- 0.010 usec) Average memory usage: 12770 KB (+- 8 KB) Average build-id-all injection took: 5.611 msec (+- 0.085 msec) Average time per event: 0.550 usec (+- 0.008 usec) Average memory usage: 12134 KB (+- 8 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 8.518 msec (+- 0.102 msec) Average time per event: 0.835 usec (+- 0.010 usec) Average memory usage: 12518 KB (+- 10 KB) Average build-id-all injection took: 5.503 msec (+- 0.073 msec) Average time per event: 0.540 usec (+- 0.007 usec) Average memory usage: 11882 KB (+- 8 KB) Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 2,394.88 msec task-clock:u # 1.577 CPUs utilized ( +- 0.83% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 103,181 page-faults:u # 0.043 M/sec ( +- 0.11% ) 3,548,172,030 cycles:u # 1.482 GHz ( +- 0.30% ) (83.26%) 81,537,700 stalled-cycles-frontend:u # 2.30% frontend cycles idle ( +- 1.54% ) (83.24%) 876,631,544 stalled-cycles-backend:u # 24.71% backend cycles idle ( +- 1.14% ) (83.45%) 5,960,361,707 instructions:u # 1.68 insn per cycle # 0.15 stalled cycles per insn ( +- 0.27% ) (83.26%) 1,269,413,491 branches:u # 530.054 M/sec ( +- 0.10% ) (83.48%) 11,372,453 branch-misses:u # 0.90% of all branches ( +- 0.52% ) (83.31%) 1.51874 +- 0.00642 seconds time elapsed ( +- 0.42% ) $ Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20201030054742.87740-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-30 05:47:42 +00:00
.use_stdio = true,
};
int ret;
bool repipe = true;
perf inject: Add a command line option to specify build ids. This commit adds the option --known-build-ids to perf inject. It allows the user to explicitly specify the build id for a given path, instead of retrieving it from the current system. This is useful in cases where a perf.data file is processed on a different system from where it was collected, or if some of the binaries are no longer available. The build ids and paths are specified in pairs in the command line. Using the file:// specifier, build ids can be loaded from a file directly generated by perf buildid-list. This is convenient to copy build ids from one perf.data file to another. ** Example: In this example we use perf record to create two perf.data files, one with build ids and another without, and use perf buildid-list and perf inject to copy the build ids from the first file to the second. $ perf record ls /tmp $ perf record --no-buildid -o perf.data.no-buildid ls /tmp $ perf buildid-list > build-ids.txt $ perf inject -b --known-build-ids='file://build-ids.txt' \ -i perf.data.no-buildid -o perf.data.buildid Signed-off-by: Raul Silvera <rsilvera@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220815225922.2118745-1-rsilvera@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-15 22:59:22 +00:00
const char *known_build_ids = NULL;
perf inject: Add jitdump mmap injection support This patch adds a --jit/-j option to perf inject. This options injects MMAP records into the perf.data file to cover the jitted code mmaps. It also emits ELF images for each function in the jidump file. Those images are created where the jitdump file is. The MMAP records point to that location as well. Typical flow: $ perf record -k mono -- java -agentpath:libpjvmti.so java_class $ perf inject --jit -i perf.data -o perf.data.jitted $ perf report -i perf.data.jitted Note that jitdump.h support is not limited to Java, it works with any jitted environment modified to emit the jitdump file format, include those where code can be jitted multiple times and moved around. The jitdump.h format is adapted from the Oprofile project. The genelf.c (ELF binary generation) depends on MD5 hash encoding for the buildid. To enable this, libssl-dev must be installed. If not, then genelf.c defaults to using urandom to generate the buildid, which is not ideal. The Makefile auto-detects the presence on libssl-dev. This version mmaps the jitdump file to create a marker MMAP record in the perf.data file. The marker is used to detect jitdump and cause perf inject to inject the jitted mmaps and generate ELF images for jitted functions. In V8, the following fixes and changes were made among other things: - the jidump header format include a new flags field to be used to carry information about the configuration of the runtime agent. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix mmap pgoff: MMAP event pgoff must be the offset within the ELF file at which the code resides. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix ELF virtual addresses: perf tools expect the ELF virtual addresses of dynamic objects to match the file offset. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - JIT MMAP injection does not obey finished_round semantics. JIT MMAP injection injects all MMAP events in one go, so it does not obey finished_round semantics, so drop the finished_round events from the output perf.data file. Contributed by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carl Love <cel@us.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John McCutchan <johnmccutchan@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com [ Moved inject.build_ids ordering bits to a separate patch, fixed the NO_LIBELF=1 build ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-30 09:02:21 +00:00
struct option options[] = {
OPT_BOOLEAN('b', "build-ids", &inject.build_ids,
"Inject build-ids into the output stream"),
OPT_BOOLEAN(0, "buildid-all", &inject.build_id_all,
"Inject build-ids of all DSOs into the output stream"),
perf inject: Add a command line option to specify build ids. This commit adds the option --known-build-ids to perf inject. It allows the user to explicitly specify the build id for a given path, instead of retrieving it from the current system. This is useful in cases where a perf.data file is processed on a different system from where it was collected, or if some of the binaries are no longer available. The build ids and paths are specified in pairs in the command line. Using the file:// specifier, build ids can be loaded from a file directly generated by perf buildid-list. This is convenient to copy build ids from one perf.data file to another. ** Example: In this example we use perf record to create two perf.data files, one with build ids and another without, and use perf buildid-list and perf inject to copy the build ids from the first file to the second. $ perf record ls /tmp $ perf record --no-buildid -o perf.data.no-buildid ls /tmp $ perf buildid-list > build-ids.txt $ perf inject -b --known-build-ids='file://build-ids.txt' \ -i perf.data.no-buildid -o perf.data.buildid Signed-off-by: Raul Silvera <rsilvera@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220815225922.2118745-1-rsilvera@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-15 22:59:22 +00:00
OPT_STRING(0, "known-build-ids", &known_build_ids,
"buildid path [,buildid path...]",
"build-ids to use for given paths"),
OPT_STRING('i', "input", &inject.input_name, "file",
"input file name"),
OPT_STRING('o', "output", &inject.output.path, "file",
"output file name"),
perf inject: Merge sched_stat_* and sched_switch events You may want to know where and how long a task is sleeping. A callchain may be found in sched_switch and a time slice in stat_iowait, so I add handler in perf inject for merging this events. My code saves sched_switch event for each process and when it meets stat_iowait, it reports the sched_switch event, because this event contains a correct callchain. By another words it replaces all stat_iowait events on proper sched_switch events. I use the next sequence of commands for testing: perf record -e sched:sched_stat_sleep -e sched:sched_switch \ -e sched:sched_process_exit -g -o ~/perf.data.raw \ ~/test-program perf inject -v -s -i ~/perf.data.raw -o ~/perf.data perf report --stdio -i ~/perf.data 100.00% foo [kernel.kallsyms] [k] __schedule | --- __schedule schedule | |--79.75%-- schedule_hrtimeout_range_clock | schedule_hrtimeout_range | poll_schedule_timeout | do_select | core_sys_select | sys_select | system_call_fastpath | __select | __libc_start_main | --20.25%-- do_nanosleep hrtimer_nanosleep sys_nanosleep system_call_fastpath __GI___libc_nanosleep __libc_start_main And here is test-program.c: #include<unistd.h> #include<time.h> #include<sys/select.h> int main() { struct timespec ts1; struct timeval tv1; int i; long s; for (i = 0; i < 10; i++) { ts1.tv_sec = 0; ts1.tv_nsec = 10000000; nanosleep(&ts1, NULL); tv1.tv_sec = 0; tv1.tv_usec = 40000; select(0, NULL, NULL, NULL,&tv1); } return 1; } Signed-off-by: Andrew Vagin <avagin@openvz.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org [ committer note: Made it use evsel->handler ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 12:56:04 +00:00
OPT_BOOLEAN('s', "sched-stat", &inject.sched_stat,
"Merge sched-stat and sched-switch for getting events "
"where and how long tasks slept"),
#ifdef HAVE_JITDUMP
perf inject: Add jitdump mmap injection support This patch adds a --jit/-j option to perf inject. This options injects MMAP records into the perf.data file to cover the jitted code mmaps. It also emits ELF images for each function in the jidump file. Those images are created where the jitdump file is. The MMAP records point to that location as well. Typical flow: $ perf record -k mono -- java -agentpath:libpjvmti.so java_class $ perf inject --jit -i perf.data -o perf.data.jitted $ perf report -i perf.data.jitted Note that jitdump.h support is not limited to Java, it works with any jitted environment modified to emit the jitdump file format, include those where code can be jitted multiple times and moved around. The jitdump.h format is adapted from the Oprofile project. The genelf.c (ELF binary generation) depends on MD5 hash encoding for the buildid. To enable this, libssl-dev must be installed. If not, then genelf.c defaults to using urandom to generate the buildid, which is not ideal. The Makefile auto-detects the presence on libssl-dev. This version mmaps the jitdump file to create a marker MMAP record in the perf.data file. The marker is used to detect jitdump and cause perf inject to inject the jitted mmaps and generate ELF images for jitted functions. In V8, the following fixes and changes were made among other things: - the jidump header format include a new flags field to be used to carry information about the configuration of the runtime agent. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix mmap pgoff: MMAP event pgoff must be the offset within the ELF file at which the code resides. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix ELF virtual addresses: perf tools expect the ELF virtual addresses of dynamic objects to match the file offset. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - JIT MMAP injection does not obey finished_round semantics. JIT MMAP injection injects all MMAP events in one go, so it does not obey finished_round semantics, so drop the finished_round events from the output perf.data file. Contributed by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carl Love <cel@us.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John McCutchan <johnmccutchan@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com [ Moved inject.build_ids ordering bits to a separate patch, fixed the NO_LIBELF=1 build ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-30 09:02:21 +00:00
OPT_BOOLEAN('j', "jit", &inject.jit_mode, "merge jitdump files into perf.data file"),
#endif
OPT_INCR('v', "verbose", &verbose,
"be more verbose (show build ids, etc)"),
OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name,
"file", "vmlinux pathname"),
OPT_BOOLEAN(0, "ignore-vmlinux", &symbol_conf.ignore_vmlinux,
"don't load vmlinux even if found"),
OPT_STRING(0, "kallsyms", &symbol_conf.kallsyms_name, "file",
"kallsyms pathname"),
OPT_BOOLEAN('f', "force", &data.force, "don't complain, do it"),
OPT_CALLBACK_OPTARG(0, "itrace", &inject.itrace_synth_opts,
NULL, "opts", "Instruction Tracing options\n"
ITRACE_HELP,
itrace_parse_synth_opts),
OPT_BOOLEAN(0, "strip", &inject.strip,
"strip non-synthesized events (use with --itrace)"),
OPT_CALLBACK_OPTARG(0, "vm-time-correlation", &inject, NULL, "opts",
"correlate time between VM guests and the host",
parse_vm_time_correlation),
perf inject: Add support for injecting guest sideband events Inject events from a perf.data file recorded in a virtual machine into a perf.data file recorded on the host at the same time. Only side band events (e.g. mmap, comm, fork, exit etc) and build IDs are injected. Additionally, the guest kcore_dir is copied as kcore_dir__ appended to the machine PID. This is non-trivial because: o It is not possible to process 2 sessions simultaneously so instead events are first written to a temporary file. o To avoid conflict, guest sample IDs are replaced with new unused sample IDs. o Guest event's CPU is changed to be the host CPU because it is more useful for reporting and analysis. o Sample ID is mapped to machine PID which is recorded with VCPU in the id index. This is important to allow guest events to be related to the guest machine and VCPU. o Timestamps must be converted. o Events are inserted to obey finished-round ordering. The anticipated use-case is: - start recording sideband events in a guest machine - start recording an AUX area trace on the host which can trace also the guest (e.g. Intel PT) - run test case on the guest - stop recording on the host - stop recording on the guest - copy the guest perf.data file to the host - inject the guest perf.data file sideband events into the host perf.data file using perf inject - the resulting perf.data file can now be used Subsequent patches provide Intel PT support for this. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220711093218.10967-25-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-11 09:32:07 +00:00
OPT_CALLBACK_OPTARG(0, "guest-data", &inject, NULL, "opts",
"inject events from a guest perf.data file",
parse_guest_data),
OPT_STRING(0, "guestmount", &symbol_conf.guestmount, "directory",
"guest mount directory under which every guest os"
" instance has a subdir"),
OPT_END()
};
const char * const inject_usage[] = {
"perf inject [<options>]",
NULL
};
#ifndef HAVE_JITDUMP
perf inject: Add jitdump mmap injection support This patch adds a --jit/-j option to perf inject. This options injects MMAP records into the perf.data file to cover the jitted code mmaps. It also emits ELF images for each function in the jidump file. Those images are created where the jitdump file is. The MMAP records point to that location as well. Typical flow: $ perf record -k mono -- java -agentpath:libpjvmti.so java_class $ perf inject --jit -i perf.data -o perf.data.jitted $ perf report -i perf.data.jitted Note that jitdump.h support is not limited to Java, it works with any jitted environment modified to emit the jitdump file format, include those where code can be jitted multiple times and moved around. The jitdump.h format is adapted from the Oprofile project. The genelf.c (ELF binary generation) depends on MD5 hash encoding for the buildid. To enable this, libssl-dev must be installed. If not, then genelf.c defaults to using urandom to generate the buildid, which is not ideal. The Makefile auto-detects the presence on libssl-dev. This version mmaps the jitdump file to create a marker MMAP record in the perf.data file. The marker is used to detect jitdump and cause perf inject to inject the jitted mmaps and generate ELF images for jitted functions. In V8, the following fixes and changes were made among other things: - the jidump header format include a new flags field to be used to carry information about the configuration of the runtime agent. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix mmap pgoff: MMAP event pgoff must be the offset within the ELF file at which the code resides. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix ELF virtual addresses: perf tools expect the ELF virtual addresses of dynamic objects to match the file offset. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - JIT MMAP injection does not obey finished_round semantics. JIT MMAP injection injects all MMAP events in one go, so it does not obey finished_round semantics, so drop the finished_round events from the output perf.data file. Contributed by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carl Love <cel@us.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John McCutchan <johnmccutchan@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com [ Moved inject.build_ids ordering bits to a separate patch, fixed the NO_LIBELF=1 build ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-30 09:02:21 +00:00
set_option_nobuild(options, 'j', "jit", "NO_LIBELF=1", true);
#endif
argc = parse_options(argc, argv, options, inject_usage, 0);
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
/*
* Any (unrecognized) arguments left?
*/
if (argc)
usage_with_options(inject_usage, options);
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
if (inject.strip && !inject.itrace_synth_opts.set) {
pr_err("--strip option requires --itrace option\n");
return -1;
}
if (symbol__validate_sym_arguments())
return -1;
if (inject.in_place_update) {
if (!strcmp(inject.input_name, "-")) {
pr_err("Input file name required for in-place updating\n");
return -1;
}
if (strcmp(inject.output.path, "-")) {
pr_err("Output file name must not be specified for in-place updating\n");
return -1;
}
if (!data.force && !inject.in_place_update_dry_run) {
pr_err("The input file would be updated in place, "
"the --force option is required.\n");
return -1;
}
if (!inject.in_place_update_dry_run)
data.in_place_update = true;
} else {
if (strcmp(inject.output.path, "-") && !inject.strip &&
has_kcore_dir(inject.input_name)) {
inject.output.is_dir = true;
inject.copy_kcore_dir = true;
}
if (perf_data__open(&inject.output)) {
perror("failed to create output file");
return -1;
}
}
data.path = inject.input_name;
if (!strcmp(inject.input_name, "-") || inject.output.is_pipe) {
inject.is_pipe = true;
/*
* Do not repipe header when input is a regular file
* since either it can rewrite the header at the end
* or write a new pipe header.
*/
if (strcmp(inject.input_name, "-"))
repipe = false;
}
inject.session = __perf_session__new(&data, repipe,
perf inject: Fix segfault due to perf_data__fd() without open The fixed commit attempts to get the output file descriptor even if the file was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. __GI___fileno (fp=0x0) at fileno.c:35 35 fileno.c: No such file or directory. (gdb) bt #0 __GI___fileno (fp=0x0) at fileno.c:35 #1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72 #2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69 #3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017 #4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313 #5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539 (gdb) Fixes: 0ae03893623dd1dd ("perf tools: Pass a fd to perf_file_header__read_pipe()") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211213084829.114772-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-13 08:48:29 +00:00
output_fd(&inject),
&inject.tool);
if (IS_ERR(inject.session)) {
ret = PTR_ERR(inject.session);
goto out_close_output;
}
if (zstd_init(&(inject.session->zstd_data), 0) < 0)
pr_warning("Decompression initialization failed.\n");
perf inject: Keep some features sections from input file perf inject overwrites feature sections with information from the current machine. It makes more sense to keep original information that describes the machine or software when perf record was run. Example: perf.data from "Desktop" injected on "nuc11" Before: $ perf script --header-only -i perf.data-from-desktop | head -15 # ======== # captured on : Thu May 19 09:55:50 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : Desktop # os release : 5.13.0-41-generic # perf version : 5.18.rc5.gac837f7ca7ed # arch : x86_64 # nrcpus online : 28 # nrcpus avail : 28 # cpudesc : Intel(R) Core(TM) i9-9940X CPU @ 3.30GHz # cpuid : GenuineIntel,6,85,4 # total memory : 65548656 kB $ perf inject -i perf.data-from-desktop -o injected-perf.data $ perf script --header-only -i injected-perf.data | head -15 # ======== # captured on : Fri May 20 15:06:55 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : nuc11 # os release : 5.17.5-local # perf version : 5.18.rc5.g0f828fdeb9af # arch : x86_64 # nrcpus online : 8 # nrcpus avail : 8 # cpudesc : 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz # cpuid : GenuineIntel,6,140,1 # total memory : 16012124 kB After: $ perf inject -i perf.data-from-desktop -o injected-perf.data $ perf script --header-only -i injected-perf.data | head -15 # ======== # captured on : Fri May 20 15:08:54 2022 # header version : 1 # data offset : 1208 # data size : 837480 # feat offset : 838688 # hostname : Desktop # os release : 5.13.0-41-generic # perf version : 5.18.rc5.gac837f7ca7ed # arch : x86_64 # nrcpus online : 28 # nrcpus avail : 28 # cpudesc : Intel(R) Core(TM) i9-9940X CPU @ 3.30GHz # cpuid : GenuineIntel,6,85,4 # total memory : 65548656 kB Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220520132404.25853-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-05-20 13:24:02 +00:00
/* Save original section info before feature bits change */
ret = save_section_info(&inject);
if (ret)
goto out_delete;
if (!data.is_pipe && inject.output.is_pipe) {
ret = perf_header__write_pipe(perf_data__fd(&inject.output));
if (ret < 0) {
pr_err("Couldn't write a new pipe header.\n");
goto out_delete;
}
ret = perf_event__synthesize_for_pipe(&inject.tool,
inject.session,
&inject.output,
perf_event__repipe);
if (ret < 0)
goto out_delete;
}
if (inject.build_ids && !inject.build_id_all) {
/*
* to make sure the mmap records are ordered correctly
* and so that the correct especially due to jitted code
* mmaps. We cannot generate the buildid hit list and
* inject the jit mmaps at the same time for now.
*/
inject.tool.ordered_events = true;
inject.tool.ordering_requires_timestamps = true;
perf inject: Add a command line option to specify build ids. This commit adds the option --known-build-ids to perf inject. It allows the user to explicitly specify the build id for a given path, instead of retrieving it from the current system. This is useful in cases where a perf.data file is processed on a different system from where it was collected, or if some of the binaries are no longer available. The build ids and paths are specified in pairs in the command line. Using the file:// specifier, build ids can be loaded from a file directly generated by perf buildid-list. This is convenient to copy build ids from one perf.data file to another. ** Example: In this example we use perf record to create two perf.data files, one with build ids and another without, and use perf buildid-list and perf inject to copy the build ids from the first file to the second. $ perf record ls /tmp $ perf record --no-buildid -o perf.data.no-buildid ls /tmp $ perf buildid-list > build-ids.txt $ perf inject -b --known-build-ids='file://build-ids.txt' \ -i perf.data.no-buildid -o perf.data.buildid Signed-off-by: Raul Silvera <rsilvera@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220815225922.2118745-1-rsilvera@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-15 22:59:22 +00:00
if (known_build_ids != NULL) {
inject.known_build_ids =
perf_inject__parse_known_build_ids(known_build_ids);
if (inject.known_build_ids == NULL) {
pr_err("Couldn't parse known build ids.\n");
goto out_delete;
}
}
}
if (inject.sched_stat) {
inject.tool.ordered_events = true;
}
#ifdef HAVE_JITDUMP
perf inject: Add jitdump mmap injection support This patch adds a --jit/-j option to perf inject. This options injects MMAP records into the perf.data file to cover the jitted code mmaps. It also emits ELF images for each function in the jidump file. Those images are created where the jitdump file is. The MMAP records point to that location as well. Typical flow: $ perf record -k mono -- java -agentpath:libpjvmti.so java_class $ perf inject --jit -i perf.data -o perf.data.jitted $ perf report -i perf.data.jitted Note that jitdump.h support is not limited to Java, it works with any jitted environment modified to emit the jitdump file format, include those where code can be jitted multiple times and moved around. The jitdump.h format is adapted from the Oprofile project. The genelf.c (ELF binary generation) depends on MD5 hash encoding for the buildid. To enable this, libssl-dev must be installed. If not, then genelf.c defaults to using urandom to generate the buildid, which is not ideal. The Makefile auto-detects the presence on libssl-dev. This version mmaps the jitdump file to create a marker MMAP record in the perf.data file. The marker is used to detect jitdump and cause perf inject to inject the jitted mmaps and generate ELF images for jitted functions. In V8, the following fixes and changes were made among other things: - the jidump header format include a new flags field to be used to carry information about the configuration of the runtime agent. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix mmap pgoff: MMAP event pgoff must be the offset within the ELF file at which the code resides. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - Fix ELF virtual addresses: perf tools expect the ELF virtual addresses of dynamic objects to match the file offset. Contributed by: Adrian Hunter <adrian.hunter@intel.com> - JIT MMAP injection does not obey finished_round semantics. JIT MMAP injection injects all MMAP events in one go, so it does not obey finished_round semantics, so drop the finished_round events from the output perf.data file. Contributed by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carl Love <cel@us.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John McCutchan <johnmccutchan@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com [ Moved inject.build_ids ordering bits to a separate patch, fixed the NO_LIBELF=1 build ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-30 09:02:21 +00:00
if (inject.jit_mode) {
inject.tool.mmap2 = perf_event__jit_repipe_mmap2;
inject.tool.mmap = perf_event__jit_repipe_mmap;
inject.tool.ordered_events = true;
inject.tool.ordering_requires_timestamps = true;
/*
* JIT MMAP injection injects all MMAP events in one go, so it
* does not obey finished_round semantics.
*/
inject.tool.finished_round = perf_event__drop_oe;
}
#endif
ret = symbol__init(&inject.session->header.env);
if (ret < 0)
goto out_delete;
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
ret = __cmd_inject(&inject);
perf inject: Add support for injecting guest sideband events Inject events from a perf.data file recorded in a virtual machine into a perf.data file recorded on the host at the same time. Only side band events (e.g. mmap, comm, fork, exit etc) and build IDs are injected. Additionally, the guest kcore_dir is copied as kcore_dir__ appended to the machine PID. This is non-trivial because: o It is not possible to process 2 sessions simultaneously so instead events are first written to a temporary file. o To avoid conflict, guest sample IDs are replaced with new unused sample IDs. o Guest event's CPU is changed to be the host CPU because it is more useful for reporting and analysis. o Sample ID is mapped to machine PID which is recorded with VCPU in the id index. This is important to allow guest events to be related to the guest machine and VCPU. o Timestamps must be converted. o Events are inserted to obey finished-round ordering. The anticipated use-case is: - start recording sideband events in a guest machine - start recording an AUX area trace on the host which can trace also the guest (e.g. Intel PT) - run test case on the guest - stop recording on the host - stop recording on the guest - copy the guest perf.data file to the host - inject the guest perf.data file sideband events into the host perf.data file using perf inject - the resulting perf.data file can now be used Subsequent patches provide Intel PT support for this. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220711093218.10967-25-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-11 09:32:07 +00:00
guest_session__exit(&inject.guest_session);
out_delete:
perf inject: Add a command line option to specify build ids. This commit adds the option --known-build-ids to perf inject. It allows the user to explicitly specify the build id for a given path, instead of retrieving it from the current system. This is useful in cases where a perf.data file is processed on a different system from where it was collected, or if some of the binaries are no longer available. The build ids and paths are specified in pairs in the command line. Using the file:// specifier, build ids can be loaded from a file directly generated by perf buildid-list. This is convenient to copy build ids from one perf.data file to another. ** Example: In this example we use perf record to create two perf.data files, one with build ids and another without, and use perf buildid-list and perf inject to copy the build ids from the first file to the second. $ perf record ls /tmp $ perf record --no-buildid -o perf.data.no-buildid ls /tmp $ perf buildid-list > build-ids.txt $ perf inject -b --known-build-ids='file://build-ids.txt' \ -i perf.data.no-buildid -o perf.data.buildid Signed-off-by: Raul Silvera <rsilvera@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220815225922.2118745-1-rsilvera@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-15 22:59:22 +00:00
strlist__delete(inject.known_build_ids);
zstd_fini(&(inject.session->zstd_data));
perf_session__delete(inject.session);
out_close_output:
perf inject: Fix segfault due to close without open The fixed commit attempts to close inject.output even if it was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 48 iofclose.c: No such file or directory. (gdb) bt #0 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 #1 0x0000557fc7b74f92 in perf_data__close (data=data@entry=0x7ffcdafa6578) at util/data.c:376 #2 0x0000557fc7a6b807 in cmd_inject (argc=<optimized out>, argv=<optimized out>) at builtin-inject.c:1085 #3 0x0000557fc7ac4783 in run_builtin (p=0x557fc8074878 <commands+600>, argc=4, argv=0x7ffcdafb6a60) at perf.c:313 #4 0x0000557fc7a25d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #5 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #6 main (argc=4, argv=0x7ffcdafb6a60) at perf.c:539 (gdb) Fixes: 02e6246f5364d526 ("perf inject: Close inject.output on exit") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211213084829.114772-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-13 08:48:28 +00:00
if (!inject.in_place_update)
perf_data__close(&inject.output);
free(inject.itrace_synth_opts.vm_tm_corr_args);
return ret;
perf: add perf-inject builtin Currently, perf 'live mode' writes build-ids at the end of the session, which isn't actually useful for processing live mode events. What would be better would be to have the build-ids sent before any of the samples that reference them, which can be done by processing the event stream and retrieving the build-ids on the first hit. Doing that in perf-record itself, however, is off-limits. This patch introduces perf-inject, which does the same job while leaving perf-record untouched. Normal mode perf still records the build-ids at the end of the session as it should, but for live mode, perf-inject can be injected in between the record and report steps e.g.: perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i - perf-inject reads a perf-record event stream and repipes it to stdout. At any point the processing code can inject other events into the event stream - in this case build-ids (-b option) are read and injected as needed into the event stream. Build-ids are just the first user of perf-inject - potentially anything that needs userspace processing to augment the trace stream with additional information could make use of this facility. Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-01 06:41:20 +00:00
}