linux-stable/drivers/gpu/drm/drm_probe_helper.c

693 lines
22 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006-2008 Intel Corporation
* Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
*
* DRM core CRTC related functions
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of the copyright holders not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no representations
* about the suitability of this software for any purpose. It is provided "as
* is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*
* Authors:
* Keith Packard
* Eric Anholt <eric@anholt.net>
* Dave Airlie <airlied@linux.ie>
* Jesse Barnes <jesse.barnes@intel.com>
*/
#include <linux/export.h>
#include <linux/moduleparam.h>
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_edid.h>
/**
* DOC: output probing helper overview
*
* This library provides some helper code for output probing. It provides an
* implementation of the core &drm_connector_funcs.fill_modes interface with
* drm_helper_probe_single_connector_modes().
*
* It also provides support for polling connectors with a work item and for
* generic hotplug interrupt handling where the driver doesn't or cannot keep
* track of a per-connector hpd interrupt.
*
* This helper library can be used independently of the modeset helper library.
* Drivers can also overwrite different parts e.g. use their own hotplug
* handling code to avoid probing unrelated outputs.
*
* The probe helpers share the function table structures with other display
* helper libraries. See &struct drm_connector_helper_funcs for the details.
*/
static bool drm_kms_helper_poll = true;
module_param_named(poll, drm_kms_helper_poll, bool, 0600);
static enum drm_mode_status
drm_mode_validate_flag(const struct drm_display_mode *mode,
int flags)
{
if ((mode->flags & DRM_MODE_FLAG_INTERLACE) &&
!(flags & DRM_MODE_FLAG_INTERLACE))
return MODE_NO_INTERLACE;
if ((mode->flags & DRM_MODE_FLAG_DBLSCAN) &&
!(flags & DRM_MODE_FLAG_DBLSCAN))
return MODE_NO_DBLESCAN;
if ((mode->flags & DRM_MODE_FLAG_3D_MASK) &&
!(flags & DRM_MODE_FLAG_3D_MASK))
return MODE_NO_STEREO;
return MODE_OK;
}
drm: Perform cmdline mode parsing during connector initialisation i915.ko has a custom fbdev initialisation routine that aims to preserve the current mode set by the BIOS, unless overruled by the user. The user's wishes are determined by what, if any, mode is specified on the command line (via the video= parameter). However, that command line mode is first parsed by drm_fb_helper_initial_config() which is called after i915.ko's custom initial_config() as a fallback method. So in order for us to honour it, we need to move the cmdline parser earlier. If we perform the connector cmdline parsing as soon as we initialise the connector, that cmdline mode and forced status is then available even if the fbdev helper is not compiled in or never called. We also then expose the cmdline user mode in the connector mode lists. v2: Rebase after connector->name upheaval. v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely simplifies things while at that. v4: Fix checkpatch. v5: Select FB_CMDLINE to adapt to the changed fbdev patch. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2) Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2) Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-06 08:08:32 +00:00
static int drm_helper_probe_add_cmdline_mode(struct drm_connector *connector)
{
drm: Only create a cmdline mode if no probed modes match The intention of using video=<connector>:<mode> is primarily to select the user's preferred resolution at startup. Currently we always create a new mode irrespective of whether the monitor has a native mode at the desired resolution. This has the issue that we may then select the fake mode rather the native mode during fb_helper->inital_config() and so if the fake mode is invalid we then end up with a loss of signal. Oops. This invalid fake mode would also be exported to userspace, who potentially may make the same mistake. To avoid this issue, we filter out the added command line mode if we detect the desired resolution (and clock if specified) amongst the probed modes. This fixes the immediate problem of adding a duplicate mode, but perhaps more generically we should avoid adding a GTF mode if the monitor has an EDID that is not GTF-compatible, or similarly for CVT. Was meant to fix a regression from commit eaf99c749d43ae74ac7ffece5512f3c73f01dfd2 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 6 10:08:32 2014 +0200 drm: Perform cmdline mode parsing during connector initialisation but Radek explained that the original bug is no longer reproducible on latest kernels. v2: Explicitly delete our earlier cmdline mode v3: Mode pruning should now be sufficient to delete stale cmdline modes v4: Compute the vrefresh for the probed mode Reported-by: Radek Dostál <rd@radekdostal.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Radek Dostál <rd@radekdostal.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Drop cc: stable since no longer a pressing bugfix, just nice-to-have.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464774651-20376-1-git-send-email-chris@chris-wilson.co.uk
2016-06-01 09:50:51 +00:00
struct drm_cmdline_mode *cmdline_mode;
drm: Perform cmdline mode parsing during connector initialisation i915.ko has a custom fbdev initialisation routine that aims to preserve the current mode set by the BIOS, unless overruled by the user. The user's wishes are determined by what, if any, mode is specified on the command line (via the video= parameter). However, that command line mode is first parsed by drm_fb_helper_initial_config() which is called after i915.ko's custom initial_config() as a fallback method. So in order for us to honour it, we need to move the cmdline parser earlier. If we perform the connector cmdline parsing as soon as we initialise the connector, that cmdline mode and forced status is then available even if the fbdev helper is not compiled in or never called. We also then expose the cmdline user mode in the connector mode lists. v2: Rebase after connector->name upheaval. v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely simplifies things while at that. v4: Fix checkpatch. v5: Select FB_CMDLINE to adapt to the changed fbdev patch. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2) Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2) Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-06 08:08:32 +00:00
struct drm_display_mode *mode;
drm: Only create a cmdline mode if no probed modes match The intention of using video=<connector>:<mode> is primarily to select the user's preferred resolution at startup. Currently we always create a new mode irrespective of whether the monitor has a native mode at the desired resolution. This has the issue that we may then select the fake mode rather the native mode during fb_helper->inital_config() and so if the fake mode is invalid we then end up with a loss of signal. Oops. This invalid fake mode would also be exported to userspace, who potentially may make the same mistake. To avoid this issue, we filter out the added command line mode if we detect the desired resolution (and clock if specified) amongst the probed modes. This fixes the immediate problem of adding a duplicate mode, but perhaps more generically we should avoid adding a GTF mode if the monitor has an EDID that is not GTF-compatible, or similarly for CVT. Was meant to fix a regression from commit eaf99c749d43ae74ac7ffece5512f3c73f01dfd2 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 6 10:08:32 2014 +0200 drm: Perform cmdline mode parsing during connector initialisation but Radek explained that the original bug is no longer reproducible on latest kernels. v2: Explicitly delete our earlier cmdline mode v3: Mode pruning should now be sufficient to delete stale cmdline modes v4: Compute the vrefresh for the probed mode Reported-by: Radek Dostál <rd@radekdostal.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Radek Dostál <rd@radekdostal.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Drop cc: stable since no longer a pressing bugfix, just nice-to-have.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464774651-20376-1-git-send-email-chris@chris-wilson.co.uk
2016-06-01 09:50:51 +00:00
cmdline_mode = &connector->cmdline_mode;
if (!cmdline_mode->specified)
drm: Perform cmdline mode parsing during connector initialisation i915.ko has a custom fbdev initialisation routine that aims to preserve the current mode set by the BIOS, unless overruled by the user. The user's wishes are determined by what, if any, mode is specified on the command line (via the video= parameter). However, that command line mode is first parsed by drm_fb_helper_initial_config() which is called after i915.ko's custom initial_config() as a fallback method. So in order for us to honour it, we need to move the cmdline parser earlier. If we perform the connector cmdline parsing as soon as we initialise the connector, that cmdline mode and forced status is then available even if the fbdev helper is not compiled in or never called. We also then expose the cmdline user mode in the connector mode lists. v2: Rebase after connector->name upheaval. v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely simplifies things while at that. v4: Fix checkpatch. v5: Select FB_CMDLINE to adapt to the changed fbdev patch. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2) Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2) Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-06 08:08:32 +00:00
return 0;
drm: Only create a cmdline mode if no probed modes match The intention of using video=<connector>:<mode> is primarily to select the user's preferred resolution at startup. Currently we always create a new mode irrespective of whether the monitor has a native mode at the desired resolution. This has the issue that we may then select the fake mode rather the native mode during fb_helper->inital_config() and so if the fake mode is invalid we then end up with a loss of signal. Oops. This invalid fake mode would also be exported to userspace, who potentially may make the same mistake. To avoid this issue, we filter out the added command line mode if we detect the desired resolution (and clock if specified) amongst the probed modes. This fixes the immediate problem of adding a duplicate mode, but perhaps more generically we should avoid adding a GTF mode if the monitor has an EDID that is not GTF-compatible, or similarly for CVT. Was meant to fix a regression from commit eaf99c749d43ae74ac7ffece5512f3c73f01dfd2 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 6 10:08:32 2014 +0200 drm: Perform cmdline mode parsing during connector initialisation but Radek explained that the original bug is no longer reproducible on latest kernels. v2: Explicitly delete our earlier cmdline mode v3: Mode pruning should now be sufficient to delete stale cmdline modes v4: Compute the vrefresh for the probed mode Reported-by: Radek Dostál <rd@radekdostal.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Radek Dostál <rd@radekdostal.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Drop cc: stable since no longer a pressing bugfix, just nice-to-have.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464774651-20376-1-git-send-email-chris@chris-wilson.co.uk
2016-06-01 09:50:51 +00:00
/* Only add a GTF mode if we find no matching probed modes */
list_for_each_entry(mode, &connector->probed_modes, head) {
if (mode->hdisplay != cmdline_mode->xres ||
mode->vdisplay != cmdline_mode->yres)
continue;
if (cmdline_mode->refresh_specified) {
/* The probed mode's vrefresh is set until later */
if (drm_mode_vrefresh(mode) != cmdline_mode->refresh)
continue;
}
return 0;
}
drm: Perform cmdline mode parsing during connector initialisation i915.ko has a custom fbdev initialisation routine that aims to preserve the current mode set by the BIOS, unless overruled by the user. The user's wishes are determined by what, if any, mode is specified on the command line (via the video= parameter). However, that command line mode is first parsed by drm_fb_helper_initial_config() which is called after i915.ko's custom initial_config() as a fallback method. So in order for us to honour it, we need to move the cmdline parser earlier. If we perform the connector cmdline parsing as soon as we initialise the connector, that cmdline mode and forced status is then available even if the fbdev helper is not compiled in or never called. We also then expose the cmdline user mode in the connector mode lists. v2: Rebase after connector->name upheaval. v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely simplifies things while at that. v4: Fix checkpatch. v5: Select FB_CMDLINE to adapt to the changed fbdev patch. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2) Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2) Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-06 08:08:32 +00:00
mode = drm_mode_create_from_cmdline_mode(connector->dev,
drm: Only create a cmdline mode if no probed modes match The intention of using video=<connector>:<mode> is primarily to select the user's preferred resolution at startup. Currently we always create a new mode irrespective of whether the monitor has a native mode at the desired resolution. This has the issue that we may then select the fake mode rather the native mode during fb_helper->inital_config() and so if the fake mode is invalid we then end up with a loss of signal. Oops. This invalid fake mode would also be exported to userspace, who potentially may make the same mistake. To avoid this issue, we filter out the added command line mode if we detect the desired resolution (and clock if specified) amongst the probed modes. This fixes the immediate problem of adding a duplicate mode, but perhaps more generically we should avoid adding a GTF mode if the monitor has an EDID that is not GTF-compatible, or similarly for CVT. Was meant to fix a regression from commit eaf99c749d43ae74ac7ffece5512f3c73f01dfd2 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 6 10:08:32 2014 +0200 drm: Perform cmdline mode parsing during connector initialisation but Radek explained that the original bug is no longer reproducible on latest kernels. v2: Explicitly delete our earlier cmdline mode v3: Mode pruning should now be sufficient to delete stale cmdline modes v4: Compute the vrefresh for the probed mode Reported-by: Radek Dostál <rd@radekdostal.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Radek Dostál <rd@radekdostal.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Drop cc: stable since no longer a pressing bugfix, just nice-to-have.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464774651-20376-1-git-send-email-chris@chris-wilson.co.uk
2016-06-01 09:50:51 +00:00
cmdline_mode);
drm: Perform cmdline mode parsing during connector initialisation i915.ko has a custom fbdev initialisation routine that aims to preserve the current mode set by the BIOS, unless overruled by the user. The user's wishes are determined by what, if any, mode is specified on the command line (via the video= parameter). However, that command line mode is first parsed by drm_fb_helper_initial_config() which is called after i915.ko's custom initial_config() as a fallback method. So in order for us to honour it, we need to move the cmdline parser earlier. If we perform the connector cmdline parsing as soon as we initialise the connector, that cmdline mode and forced status is then available even if the fbdev helper is not compiled in or never called. We also then expose the cmdline user mode in the connector mode lists. v2: Rebase after connector->name upheaval. v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely simplifies things while at that. v4: Fix checkpatch. v5: Select FB_CMDLINE to adapt to the changed fbdev patch. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2) Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2) Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-06 08:08:32 +00:00
if (mode == NULL)
return 0;
drm_mode_probed_add(connector, mode);
return 1;
}
#define DRM_OUTPUT_POLL_PERIOD (10*HZ)
/**
* drm_kms_helper_poll_enable - re-enable output polling.
* @dev: drm_device
*
* This function re-enables the output polling work, after it has been
* temporarily disabled using drm_kms_helper_poll_disable(), for example over
* suspend/resume.
*
* Drivers can call this helper from their device resume implementation. It is
* an error to call this when the output polling support has not yet been set
* up.
*
* Note that calls to enable and disable polling must be strictly ordered, which
* is automatically the case when they're only call from suspend/resume
* callbacks.
*/
void drm_kms_helper_poll_enable(struct drm_device *dev)
{
bool poll = false;
struct drm_connector *connector;
struct drm_connector_list_iter conn_iter;
2016-08-31 11:09:05 +00:00
unsigned long delay = DRM_OUTPUT_POLL_PERIOD;
if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll)
return;
drm_connector_list_iter_begin(dev, &conn_iter);
drm_for_each_connector_iter(connector, &conn_iter) {
if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT |
DRM_CONNECTOR_POLL_DISCONNECT))
poll = true;
}
drm_connector_list_iter_end(&conn_iter);
2016-08-31 11:09:05 +00:00
if (dev->mode_config.delayed_event) {
/*
* FIXME:
*
* Use short (1s) delay to handle the initial delayed event.
* This delay should not be needed, but Optimus/nouveau will
* fail in a mysterious way if the delayed event is handled as
* soon as possible like it is done in
* drm_helper_probe_single_connector_modes() in case the poll
* was enabled before.
*/
2016-08-31 11:09:05 +00:00
poll = true;
delay = HZ;
2016-08-31 11:09:05 +00:00
}
if (poll)
2016-08-31 11:09:05 +00:00
schedule_delayed_work(&dev->mode_config.output_poll_work, delay);
}
EXPORT_SYMBOL(drm_kms_helper_poll_enable);
static enum drm_connector_status
drm_helper_probe_detect_ctx(struct drm_connector *connector, bool force)
{
const struct drm_connector_helper_funcs *funcs = connector->helper_private;
struct drm_modeset_acquire_ctx ctx;
int ret;
drm_modeset_acquire_init(&ctx, 0);
retry:
ret = drm_modeset_lock(&connector->dev->mode_config.connection_mutex, &ctx);
if (!ret) {
if (funcs->detect_ctx)
ret = funcs->detect_ctx(connector, &ctx, force);
else if (connector->funcs->detect)
ret = connector->funcs->detect(connector, force);
else
ret = connector_status_connected;
}
if (ret == -EDEADLK) {
drm_modeset_backoff(&ctx);
goto retry;
}
if (WARN_ON(ret < 0))
ret = connector_status_unknown;
drm_modeset_drop_locks(&ctx);
drm_modeset_acquire_fini(&ctx);
return ret;
}
/**
* drm_helper_probe_detect - probe connector status
* @connector: connector to probe
* @ctx: acquire_ctx, or NULL to let this function handle locking.
* @force: Whether destructive probe operations should be performed.
*
* This function calls the detect callbacks of the connector.
* This function returns &drm_connector_status, or
* if @ctx is set, it might also return -EDEADLK.
*/
int
drm_helper_probe_detect(struct drm_connector *connector,
struct drm_modeset_acquire_ctx *ctx,
bool force)
{
const struct drm_connector_helper_funcs *funcs = connector->helper_private;
struct drm_device *dev = connector->dev;
int ret;
if (!ctx)
return drm_helper_probe_detect_ctx(connector, force);
ret = drm_modeset_lock(&dev->mode_config.connection_mutex, ctx);
if (ret)
return ret;
if (funcs->detect_ctx)
return funcs->detect_ctx(connector, ctx, force);
else if (connector->funcs->detect)
return connector->funcs->detect(connector, force);
else
return connector_status_connected;
}
EXPORT_SYMBOL(drm_helper_probe_detect);
/**
* drm_helper_probe_single_connector_modes - get complete set of display modes
* @connector: connector to probe
* @maxX: max width for modes
* @maxY: max height for modes
*
* Based on the helper callbacks implemented by @connector in struct
* &drm_connector_helper_funcs try to detect all valid modes. Modes will first
* be added to the connector's probed_modes list, then culled (based on validity
* and the @maxX, @maxY parameters) and put into the normal modes list.
*
* Intended to be used as a generic implementation of the
* &drm_connector_funcs.fill_modes() vfunc for drivers that use the CRTC helpers
* for output mode filtering and detection.
*
* The basic procedure is as follows
*
* 1. All modes currently on the connector's modes list are marked as stale
*
* 2. New modes are added to the connector's probed_modes list with
* drm_mode_probed_add(). New modes start their life with status as OK.
* Modes are added from a single source using the following priority order.
*
* - debugfs 'override_edid' (used for testing only)
* - firmware EDID (drm_load_edid_firmware())
* - &drm_connector_helper_funcs.get_modes vfunc
* - if the connector status is connector_status_connected, standard
* VESA DMT modes up to 1024x768 are automatically added
* (drm_add_modes_noedid())
*
* Finally modes specified via the kernel command line (video=...) are
* added in addition to what the earlier probes produced
* (drm_helper_probe_add_cmdline_mode()). These modes are generated
* using the VESA GTF/CVT formulas.
*
* 3. Modes are moved from the probed_modes list to the modes list. Potential
* duplicates are merged together (see drm_mode_connector_list_update()).
* After this step the probed_modes list will be empty again.
*
* 4. Any non-stale mode on the modes list then undergoes validation
*
* - drm_mode_validate_basic() performs basic sanity checks
* - drm_mode_validate_size() filters out modes larger than @maxX and @maxY
* (if specified)
* - drm_mode_validate_flag() checks the modes against basic connector
* capabilities (interlace_allowed,doublescan_allowed,stereo_allowed)
* - the optional &drm_connector_helper_funcs.mode_valid helper can perform
* driver and/or hardware specific checks
*
* 5. Any mode whose status is not OK is pruned from the connector's modes list,
* accompanied by a debug message indicating the reason for the mode's
* rejection (see drm_mode_prune_invalid()).
*
* Returns:
* The number of modes found on @connector.
*/
int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
uint32_t maxX, uint32_t maxY)
{
struct drm_device *dev = connector->dev;
struct drm_display_mode *mode;
const struct drm_connector_helper_funcs *connector_funcs =
connector->helper_private;
int count = 0, ret;
int mode_flags = 0;
bool verbose_prune = true;
enum drm_connector_status old_status;
struct drm_modeset_acquire_ctx ctx;
WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
drm_modeset_acquire_init(&ctx, 0);
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id,
connector->name);
retry:
ret = drm_modeset_lock(&dev->mode_config.connection_mutex, &ctx);
if (ret == -EDEADLK) {
drm_modeset_backoff(&ctx);
goto retry;
} else
WARN_ON(ret < 0);
/* set all old modes to the stale state */
list_for_each_entry(mode, &connector->modes, head)
mode->status = MODE_STALE;
old_status = connector->status;
if (connector->force) {
if (connector->force == DRM_FORCE_ON ||
connector->force == DRM_FORCE_ON_DIGITAL)
connector->status = connector_status_connected;
else
connector->status = connector_status_disconnected;
if (connector->funcs->force)
connector->funcs->force(connector);
} else {
ret = drm_helper_probe_detect(connector, &ctx, true);
if (ret == -EDEADLK) {
drm_modeset_backoff(&ctx);
goto retry;
} else if (WARN(ret < 0, "Invalid return value %i for connector detection\n", ret))
ret = connector_status_unknown;
connector->status = ret;
}
/*
* Normally either the driver's hpd code or the poll loop should
* pick up any changes and fire the hotplug event. But if
* userspace sneaks in a probe, we might miss a change. Hence
* check here, and if anything changed start the hotplug code.
*/
if (old_status != connector->status) {
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
connector->base.id,
connector->name,
drm_get_connector_status_name(old_status),
drm_get_connector_status_name(connector->status));
/*
* The hotplug event code might call into the fb
* helpers, and so expects that we do not hold any
* locks. Fire up the poll struct instead, it will
* disable itself again.
*/
dev->mode_config.delayed_event = true;
if (dev->mode_config.poll_enabled)
schedule_delayed_work(&dev->mode_config.output_poll_work,
0);
}
/* Re-enable polling in case the global poll config changed. */
if (drm_kms_helper_poll != dev->mode_config.poll_running)
drm_kms_helper_poll_enable(dev);
dev->mode_config.poll_running = drm_kms_helper_poll;
if (connector->status == connector_status_disconnected) {
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n",
connector->base.id, connector->name);
drm_mode_connector_update_edid_property(connector, NULL);
verbose_prune = false;
goto prune;
}
if (connector->override_edid) {
struct edid *edid = (struct edid *) connector->edid_blob_ptr->data;
count = drm_add_edid_modes(connector, edid);
drm_edid_to_eld(connector, edid);
} else {
struct edid *edid = drm_load_edid_firmware(connector);
if (!IS_ERR_OR_NULL(edid)) {
drm_mode_connector_update_edid_property(connector, edid);
count = drm_add_edid_modes(connector, edid);
drm_edid_to_eld(connector, edid);
kfree(edid);
}
if (count == 0)
count = (*connector_funcs->get_modes)(connector);
}
if (count == 0 && connector->status == connector_status_connected)
count = drm_add_modes_noedid(connector, 1024, 768);
drm: Perform cmdline mode parsing during connector initialisation i915.ko has a custom fbdev initialisation routine that aims to preserve the current mode set by the BIOS, unless overruled by the user. The user's wishes are determined by what, if any, mode is specified on the command line (via the video= parameter). However, that command line mode is first parsed by drm_fb_helper_initial_config() which is called after i915.ko's custom initial_config() as a fallback method. So in order for us to honour it, we need to move the cmdline parser earlier. If we perform the connector cmdline parsing as soon as we initialise the connector, that cmdline mode and forced status is then available even if the fbdev helper is not compiled in or never called. We also then expose the cmdline user mode in the connector mode lists. v2: Rebase after connector->name upheaval. v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely simplifies things while at that. v4: Fix checkpatch. v5: Select FB_CMDLINE to adapt to the changed fbdev patch. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2) Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2) Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-06 08:08:32 +00:00
count += drm_helper_probe_add_cmdline_mode(connector);
if (count == 0)
goto prune;
drm_mode_connector_list_update(connector);
if (connector->interlace_allowed)
mode_flags |= DRM_MODE_FLAG_INTERLACE;
if (connector->doublescan_allowed)
mode_flags |= DRM_MODE_FLAG_DBLSCAN;
if (connector->stereo_allowed)
mode_flags |= DRM_MODE_FLAG_3D_MASK;
list_for_each_entry(mode, &connector->modes, head) {
drm: Don't overwrite UNVERFIED mode status to OK The way the mode probing works is this: 1. All modes currently on the mode list are marked as UNVERIFIED 2. New modes are on the probed_modes list (they start with status OK) 3. Modes are moved from the probed_modes list to the actual mode list. If a mode already on the mode list is deemed to match one of the probed modes, the duplicate is dropped and the mode status updated to OK. After this the probed_modes list will be empty. 4. All modes on the mode list are verified to not violate any constraints. Any that do are marked as such. 5. Any mode left with a non-OK status is pruned from the list, with an appropriate debug message. What all this means is that any mode on the original list that didn't have a duplicate on the probed_modes list, should be left with status UNVERFIED (or previously could have been left with some other status, but never OK). I broke that in commit 05acaec334fc ("drm: Reorganize probed mode validation") by always assigning something to the mode->status during the validation step. So any mode from the old list that still passed the validation would be left on the list with status OK in the end. Fix this by not doing the basic mode validation unless the mode already has status OK (meaning it came from the probed_modes list, or at least a duplicate of it was on that list). This way we will correctly prune away any mode from the old mode list that didn't appear on the probed_modes list. Cc: stable@vger.kernel.org Cc: Adam Jackson <ajax@redhat.com> Fixes: 05acaec334fc ("drm: Reorganize probed mode validation") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449177255-9515-2-git-send-email-ville.syrjala@linux.intel.com Testcase: igt/kms_force_connector_basic/prune-stale-modes Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93332 [danvet: Also applying to drm-misc to avoid too much conflict hell - there's a big pile of patches from Ville on top of this one.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-03 21:14:09 +00:00
if (mode->status == MODE_OK)
mode->status = drm_mode_validate_basic(mode);
if (mode->status == MODE_OK)
mode->status = drm_mode_validate_size(mode, maxX, maxY);
if (mode->status == MODE_OK)
mode->status = drm_mode_validate_flag(mode, mode_flags);
if (mode->status == MODE_OK && connector_funcs->mode_valid)
mode->status = connector_funcs->mode_valid(connector,
mode);
}
prune:
drm_mode_prune_invalid(dev, &connector->modes, verbose_prune);
drm_modeset_drop_locks(&ctx);
drm_modeset_acquire_fini(&ctx);
if (list_empty(&connector->modes))
return 0;
list_for_each_entry(mode, &connector->modes, head)
mode->vrefresh = drm_mode_vrefresh(mode);
drm_mode_sort(&connector->modes);
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] probed modes :\n", connector->base.id,
connector->name);
list_for_each_entry(mode, &connector->modes, head) {
drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
drm_mode_debug_printmodeline(mode);
}
return count;
}
EXPORT_SYMBOL(drm_helper_probe_single_connector_modes);
/**
* drm_kms_helper_hotplug_event - fire off KMS hotplug events
* @dev: drm_device whose connector state changed
*
* This function fires off the uevent for userspace and also calls the
* output_poll_changed function, which is most commonly used to inform the fbdev
* emulation code and allow it to update the fbcon output configuration.
*
* Drivers should call this from their hotplug handling code when a change is
* detected. Note that this function does not do any output detection of its
* own, like drm_helper_hpd_irq_event() does - this is assumed to be done by the
* driver already.
*
* This function must be called from process context with no mode
* setting locks held.
*/
void drm_kms_helper_hotplug_event(struct drm_device *dev)
{
/* send a uevent + call fbdev */
drm_sysfs_hotplug_event(dev);
if (dev->mode_config.funcs->output_poll_changed)
dev->mode_config.funcs->output_poll_changed(dev);
}
EXPORT_SYMBOL(drm_kms_helper_hotplug_event);
static void output_poll_execute(struct work_struct *work)
{
struct delayed_work *delayed_work = to_delayed_work(work);
struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work);
struct drm_connector *connector;
struct drm_connector_list_iter conn_iter;
enum drm_connector_status old_status;
bool repoll = false, changed;
/* Pick up any changes detected by the probe functions. */
changed = dev->mode_config.delayed_event;
dev->mode_config.delayed_event = false;
if (!drm_kms_helper_poll)
goto out;
if (!mutex_trylock(&dev->mode_config.mutex)) {
repoll = true;
goto out;
}
drm_connector_list_iter_begin(dev, &conn_iter);
drm_for_each_connector_iter(connector, &conn_iter) {
/* Ignore forced connectors. */
if (connector->force)
continue;
/* Ignore HPD capable connectors and connectors where we don't
* want any hotplug detection at all for polling. */
if (!connector->polled || connector->polled == DRM_CONNECTOR_POLL_HPD)
continue;
old_status = connector->status;
/* if we are connected and don't want to poll for disconnect
skip it */
if (old_status == connector_status_connected &&
!(connector->polled & DRM_CONNECTOR_POLL_DISCONNECT))
continue;
repoll = true;
connector->status = drm_helper_probe_detect(connector, NULL, false);
if (old_status != connector->status) {
const char *old, *new;
/*
* The poll work sets force=false when calling detect so
* that drivers can avoid to do disruptive tests (e.g.
* when load detect cycles could cause flickering on
* other, running displays). This bears the risk that we
* flip-flop between unknown here in the poll work and
* the real state when userspace forces a full detect
* call after receiving a hotplug event due to this
* change.
*
* Hence clamp an unknown detect status to the old
* value.
*/
if (connector->status == connector_status_unknown) {
connector->status = old_status;
continue;
}
old = drm_get_connector_status_name(old_status);
new = drm_get_connector_status_name(connector->status);
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] "
"status updated from %s to %s\n",
connector->base.id,
connector->name,
old, new);
changed = true;
}
}
drm_connector_list_iter_end(&conn_iter);
mutex_unlock(&dev->mode_config.mutex);
out:
if (changed)
drm_kms_helper_hotplug_event(dev);
if (repoll)
schedule_delayed_work(delayed_work, DRM_OUTPUT_POLL_PERIOD);
}
/**
* drm_kms_helper_poll_disable - disable output polling
* @dev: drm_device
*
* This function disables the output polling work.
*
* Drivers can call this helper from their device suspend implementation. It is
* not an error to call this even when output polling isn't enabled or already
* disabled. Polling is re-enabled by calling drm_kms_helper_poll_enable().
*
* Note that calls to enable and disable polling must be strictly ordered, which
* is automatically the case when they're only call from suspend/resume
* callbacks.
*/
void drm_kms_helper_poll_disable(struct drm_device *dev)
{
if (!dev->mode_config.poll_enabled)
return;
cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
}
EXPORT_SYMBOL(drm_kms_helper_poll_disable);
/**
* drm_kms_helper_poll_init - initialize and enable output polling
* @dev: drm_device
*
* This function intializes and then also enables output polling support for
* @dev. Drivers which do not have reliable hotplug support in hardware can use
* this helper infrastructure to regularly poll such connectors for changes in
* their connection state.
*
* Drivers can control which connectors are polled by setting the
* DRM_CONNECTOR_POLL_CONNECT and DRM_CONNECTOR_POLL_DISCONNECT flags. On
* connectors where probing live outputs can result in visual distortion drivers
* should not set the DRM_CONNECTOR_POLL_DISCONNECT flag to avoid this.
* Connectors which have no flag or only DRM_CONNECTOR_POLL_HPD set are
* completely ignored by the polling logic.
*
* Note that a connector can be both polled and probed from the hotplug handler,
* in case the hotplug interrupt is known to be unreliable.
*/
void drm_kms_helper_poll_init(struct drm_device *dev)
{
INIT_DELAYED_WORK(&dev->mode_config.output_poll_work, output_poll_execute);
dev->mode_config.poll_enabled = true;
drm_kms_helper_poll_enable(dev);
}
EXPORT_SYMBOL(drm_kms_helper_poll_init);
/**
* drm_kms_helper_poll_fini - disable output polling and clean it up
* @dev: drm_device
*/
void drm_kms_helper_poll_fini(struct drm_device *dev)
{
drm_kms_helper_poll_disable(dev);
}
EXPORT_SYMBOL(drm_kms_helper_poll_fini);
/**
* drm_helper_hpd_irq_event - hotplug processing
* @dev: drm_device
*
* Drivers can use this helper function to run a detect cycle on all connectors
* which have the DRM_CONNECTOR_POLL_HPD flag set in their &polled member. All
* other connectors are ignored, which is useful to avoid reprobing fixed
* panels.
*
* This helper function is useful for drivers which can't or don't track hotplug
* interrupts for each connector.
*
* Drivers which support hotplug interrupts for each connector individually and
* which have a more fine-grained detect logic should bypass this code and
* directly call drm_kms_helper_hotplug_event() in case the connector state
* changed.
*
* This function must be called from process context with no mode
* setting locks held.
*
* Note that a connector can be both polled and probed from the hotplug handler,
* in case the hotplug interrupt is known to be unreliable.
*/
bool drm_helper_hpd_irq_event(struct drm_device *dev)
{
struct drm_connector *connector;
struct drm_connector_list_iter conn_iter;
enum drm_connector_status old_status;
bool changed = false;
if (!dev->mode_config.poll_enabled)
return false;
mutex_lock(&dev->mode_config.mutex);
drm_connector_list_iter_begin(dev, &conn_iter);
drm_for_each_connector_iter(connector, &conn_iter) {
/* Only handle HPD capable connectors. */
if (!(connector->polled & DRM_CONNECTOR_POLL_HPD))
continue;
old_status = connector->status;
connector->status = drm_helper_probe_detect(connector, NULL, false);
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
connector->base.id,
connector->name,
drm_get_connector_status_name(old_status),
drm_get_connector_status_name(connector->status));
if (old_status != connector->status)
changed = true;
}
drm_connector_list_iter_end(&conn_iter);
mutex_unlock(&dev->mode_config.mutex);
if (changed)
drm_kms_helper_hotplug_event(dev);
return changed;
}
EXPORT_SYMBOL(drm_helper_hpd_irq_event);