linux-stable/net/sched/sch_pie.c

574 lines
15 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
/* Copyright (C) 2013 Cisco Systems, Inc, 2013.
*
* Author: Vijay Subramanian <vijaynsu@cisco.com>
* Author: Mythili Prabhu <mysuryan@cisco.com>
*
* ECN support is added by Naeem Khademi <naeemk@ifi.uio.no>
* University of Oslo, Norway.
*
* References:
* RFC 8033: https://tools.ietf.org/html/rfc8033
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
#include <net/pkt_sched.h>
#include <net/inet_ecn.h>
#include <net/pie.h>
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
/* private data for the Qdisc */
struct pie_sched_data {
struct pie_vars vars;
struct pie_params params;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
struct pie_stats stats;
struct timer_list adapt_timer;
struct Qdisc *sch;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
};
bool pie_drop_early(struct Qdisc *sch, struct pie_params *params,
struct pie_vars *vars, u32 backlog, u32 packet_size)
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
{
u64 rnd;
u64 local_prob = vars->prob;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
u32 mtu = psched_mtu(qdisc_dev(sch));
/* If there is still burst allowance left skip random early drop */
if (vars->burst_time > 0)
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
return false;
/* If current delay is less than half of target, and
* if drop prob is low already, disable early_drop
*/
if ((vars->qdelay < params->target / 2) &&
(vars->prob < MAX_PROB / 5))
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
return false;
/* If we have fewer than 2 mtu-sized packets, disable pie_drop_early,
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
* similar to min_th in RED
*/
if (backlog < 2 * mtu)
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
return false;
/* If bytemode is turned on, use packet size to compute new
* probablity. Smaller packets will have lower drop prob in this case
*/
if (params->bytemode && packet_size <= mtu)
local_prob = (u64)packet_size * div_u64(local_prob, mtu);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
else
local_prob = vars->prob;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
if (local_prob == 0)
vars->accu_prob = 0;
else
vars->accu_prob += local_prob;
if (vars->accu_prob < (MAX_PROB / 100) * 85)
return false;
if (vars->accu_prob >= (MAX_PROB / 2) * 17)
return true;
get_random_bytes(&rnd, 8);
if ((rnd >> BITS_PER_BYTE) < local_prob) {
vars->accu_prob = 0;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
return true;
}
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
return false;
}
EXPORT_SYMBOL_GPL(pie_drop_early);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
static int pie_qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch,
struct sk_buff **to_free)
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
{
struct pie_sched_data *q = qdisc_priv(sch);
bool enqueue = false;
if (unlikely(qdisc_qlen(sch) >= sch->limit)) {
q->stats.overlimit++;
goto out;
}
if (!pie_drop_early(sch, &q->params, &q->vars, sch->qstats.backlog,
skb->len)) {
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
enqueue = true;
} else if (q->params.ecn && (q->vars.prob <= MAX_PROB / 10) &&
INET_ECN_set_ce(skb)) {
/* If packet is ecn capable, mark it if drop probability
* is lower than 10%, else drop it.
*/
q->stats.ecn_mark++;
enqueue = true;
}
/* we can enqueue the packet */
if (enqueue) {
/* Set enqueue time only when dq_rate_estimator is disabled. */
if (!q->params.dq_rate_estimator)
pie_set_enqueue_time(skb);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
q->stats.packets_in++;
if (qdisc_qlen(sch) > q->stats.maxq)
q->stats.maxq = qdisc_qlen(sch);
return qdisc_enqueue_tail(skb, sch);
}
out:
q->stats.dropped++;
q->vars.accu_prob = 0;
return qdisc_drop(skb, sch, to_free);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
}
static const struct nla_policy pie_policy[TCA_PIE_MAX + 1] = {
[TCA_PIE_TARGET] = {.type = NLA_U32},
[TCA_PIE_LIMIT] = {.type = NLA_U32},
[TCA_PIE_TUPDATE] = {.type = NLA_U32},
[TCA_PIE_ALPHA] = {.type = NLA_U32},
[TCA_PIE_BETA] = {.type = NLA_U32},
[TCA_PIE_ECN] = {.type = NLA_U32},
[TCA_PIE_BYTEMODE] = {.type = NLA_U32},
[TCA_PIE_DQ_RATE_ESTIMATOR] = {.type = NLA_U32},
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
};
static int pie_change(struct Qdisc *sch, struct nlattr *opt,
struct netlink_ext_ack *extack)
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
{
struct pie_sched_data *q = qdisc_priv(sch);
struct nlattr *tb[TCA_PIE_MAX + 1];
unsigned int qlen, dropped = 0;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
int err;
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
err = nla_parse_nested_deprecated(tb, TCA_PIE_MAX, opt, pie_policy,
NULL);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
if (err < 0)
return err;
sch_tree_lock(sch);
/* convert from microseconds to pschedtime */
if (tb[TCA_PIE_TARGET]) {
/* target is in us */
u32 target = nla_get_u32(tb[TCA_PIE_TARGET]);
/* convert to pschedtime */
q->params.target = PSCHED_NS2TICKS((u64)target * NSEC_PER_USEC);
}
/* tupdate is in jiffies */
if (tb[TCA_PIE_TUPDATE])
net: sched: pie: fix coding style issues Fix 5 warnings and 14 checks issued by checkpatch.pl: CHECK: Logical continuations should be on the previous line + if ((q->vars.qdelay < q->params.target / 2) + && (q->vars.prob < MAX_PROB / 5)) WARNING: line over 80 characters + q->params.tupdate = usecs_to_jiffies(nla_get_u32(tb[TCA_PIE_TUPDATE])); CHECK: Blank lines aren't necessary after an open brace '{' +{ + CHECK: braces {} should be used on all arms of this statement + if (qlen < QUEUE_THRESHOLD) [...] + else { [...] CHECK: Unbalanced braces around else statement + else { CHECK: No space is necessary after a cast + if (delta > (s32) (MAX_PROB / (100 / 2)) && CHECK: Unnecessary parentheses around 'qdelay == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'qdelay_old == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'q->vars.prob == 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Unnecessary parentheses around 'q->vars.avg_dq_rate > 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: Comparison to NULL could be written "!opts" + if (opts == NULL) CHECK: No space is necessary after a cast + ((u32) PSCHED_TICKS2NS(q->params.target)) / WARNING: line over 80 characters + nla_put_u32(skb, TCA_PIE_TUPDATE, jiffies_to_usecs(q->params.tupdate)) || CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: No space is necessary after a cast + .delay = ((u32) PSCHED_TICKS2NS(q->vars.qdelay)) / WARNING: Missing a blank line after declarations + struct sk_buff *skb; + skb = qdisc_dequeue_head(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + qdisc_reset_queue(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + q->params.tupdate = 0; Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-06 19:52:45 +00:00
q->params.tupdate =
usecs_to_jiffies(nla_get_u32(tb[TCA_PIE_TUPDATE]));
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
if (tb[TCA_PIE_LIMIT]) {
u32 limit = nla_get_u32(tb[TCA_PIE_LIMIT]);
q->params.limit = limit;
sch->limit = limit;
}
if (tb[TCA_PIE_ALPHA])
q->params.alpha = nla_get_u32(tb[TCA_PIE_ALPHA]);
if (tb[TCA_PIE_BETA])
q->params.beta = nla_get_u32(tb[TCA_PIE_BETA]);
if (tb[TCA_PIE_ECN])
q->params.ecn = nla_get_u32(tb[TCA_PIE_ECN]);
if (tb[TCA_PIE_BYTEMODE])
q->params.bytemode = nla_get_u32(tb[TCA_PIE_BYTEMODE]);
if (tb[TCA_PIE_DQ_RATE_ESTIMATOR])
q->params.dq_rate_estimator =
nla_get_u32(tb[TCA_PIE_DQ_RATE_ESTIMATOR]);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
/* Drop excess packets if new limit is lower */
qlen = sch->q.qlen;
while (sch->q.qlen > sch->limit) {
struct sk_buff *skb = __qdisc_dequeue_head(&sch->q);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
dropped += qdisc_pkt_len(skb);
qdisc_qstats_backlog_dec(sch, skb);
rtnl_qdisc_drop(skb, sch);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
}
qdisc_tree_reduce_backlog(sch, qlen - sch->q.qlen, dropped);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
sch_tree_unlock(sch);
return 0;
}
void pie_process_dequeue(struct sk_buff *skb, struct pie_params *params,
struct pie_vars *vars, u32 backlog)
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
{
psched_time_t now = psched_get_time();
u32 dtime = 0;
/* If dq_rate_estimator is disabled, calculate qdelay using the
* packet timestamp.
*/
if (!params->dq_rate_estimator) {
vars->qdelay = now - pie_get_enqueue_time(skb);
if (vars->dq_tstamp != DTIME_INVALID)
dtime = now - vars->dq_tstamp;
vars->dq_tstamp = now;
if (backlog == 0)
vars->qdelay = 0;
if (dtime == 0)
return;
goto burst_allowance_reduction;
}
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
/* If current queue is about 10 packets or more and dq_count is unset
* we have enough packets to calculate the drain rate. Save
* current time as dq_tstamp and start measurement cycle.
*/
if (backlog >= QUEUE_THRESHOLD && vars->dq_count == DQCOUNT_INVALID) {
vars->dq_tstamp = psched_get_time();
vars->dq_count = 0;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
}
/* Calculate the average drain rate from this value. If queue length
* has receded to a small value viz., <= QUEUE_THRESHOLD bytes, reset
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
* the dq_count to -1 as we don't have enough packets to calculate the
* drain rate anymore. The following if block is entered only when we
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
* have a substantial queue built up (QUEUE_THRESHOLD bytes or more)
* and we calculate the drain rate for the threshold here. dq_count is
* in bytes, time difference in psched_time, hence rate is in
* bytes/psched_time.
*/
if (vars->dq_count != DQCOUNT_INVALID) {
vars->dq_count += skb->len;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
if (vars->dq_count >= QUEUE_THRESHOLD) {
u32 count = vars->dq_count << PIE_SCALE;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
dtime = now - vars->dq_tstamp;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
if (dtime == 0)
return;
count = count / dtime;
if (vars->avg_dq_rate == 0)
vars->avg_dq_rate = count;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
else
vars->avg_dq_rate =
(vars->avg_dq_rate -
(vars->avg_dq_rate >> 3)) + (count >> 3);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
/* If the queue has receded below the threshold, we hold
* on to the last drain rate calculated, else we reset
* dq_count to 0 to re-enter the if block when the next
* packet is dequeued
*/
if (backlog < QUEUE_THRESHOLD) {
vars->dq_count = DQCOUNT_INVALID;
net: sched: pie: fix coding style issues Fix 5 warnings and 14 checks issued by checkpatch.pl: CHECK: Logical continuations should be on the previous line + if ((q->vars.qdelay < q->params.target / 2) + && (q->vars.prob < MAX_PROB / 5)) WARNING: line over 80 characters + q->params.tupdate = usecs_to_jiffies(nla_get_u32(tb[TCA_PIE_TUPDATE])); CHECK: Blank lines aren't necessary after an open brace '{' +{ + CHECK: braces {} should be used on all arms of this statement + if (qlen < QUEUE_THRESHOLD) [...] + else { [...] CHECK: Unbalanced braces around else statement + else { CHECK: No space is necessary after a cast + if (delta > (s32) (MAX_PROB / (100 / 2)) && CHECK: Unnecessary parentheses around 'qdelay == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'qdelay_old == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'q->vars.prob == 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Unnecessary parentheses around 'q->vars.avg_dq_rate > 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: Comparison to NULL could be written "!opts" + if (opts == NULL) CHECK: No space is necessary after a cast + ((u32) PSCHED_TICKS2NS(q->params.target)) / WARNING: line over 80 characters + nla_put_u32(skb, TCA_PIE_TUPDATE, jiffies_to_usecs(q->params.tupdate)) || CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: No space is necessary after a cast + .delay = ((u32) PSCHED_TICKS2NS(q->vars.qdelay)) / WARNING: Missing a blank line after declarations + struct sk_buff *skb; + skb = qdisc_dequeue_head(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + qdisc_reset_queue(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + q->params.tupdate = 0; Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-06 19:52:45 +00:00
} else {
vars->dq_count = 0;
vars->dq_tstamp = psched_get_time();
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
}
goto burst_allowance_reduction;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
}
}
return;
burst_allowance_reduction:
if (vars->burst_time > 0) {
if (vars->burst_time > dtime)
vars->burst_time -= dtime;
else
vars->burst_time = 0;
}
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
}
EXPORT_SYMBOL_GPL(pie_process_dequeue);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
void pie_calculate_probability(struct pie_params *params, struct pie_vars *vars,
u32 backlog)
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
{
psched_time_t qdelay = 0; /* in pschedtime */
psched_time_t qdelay_old = 0; /* in pschedtime */
s64 delta = 0; /* determines the change in probability */
u64 oldprob;
u64 alpha, beta;
u32 power;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
bool update_prob = true;
if (params->dq_rate_estimator) {
qdelay_old = vars->qdelay;
vars->qdelay_old = vars->qdelay;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
if (vars->avg_dq_rate > 0)
qdelay = (backlog << PIE_SCALE) / vars->avg_dq_rate;
else
qdelay = 0;
} else {
qdelay = vars->qdelay;
qdelay_old = vars->qdelay_old;
}
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
/* If qdelay is zero and backlog is not, it means backlog is very small,
* so we do not update probabilty in this round.
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
*/
if (qdelay == 0 && backlog != 0)
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
update_prob = false;
/* In the algorithm, alpha and beta are between 0 and 2 with typical
* value for alpha as 0.125. In this implementation, we use values 0-32
* passed from user space to represent this. Also, alpha and beta have
* unit of HZ and need to be scaled before they can used to update
* probability. alpha/beta are updated locally below by scaling down
* by 16 to come to 0-2 range.
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
*/
alpha = ((u64)params->alpha * (MAX_PROB / PSCHED_TICKS_PER_SEC)) >> 4;
beta = ((u64)params->beta * (MAX_PROB / PSCHED_TICKS_PER_SEC)) >> 4;
/* We scale alpha and beta differently depending on how heavy the
* congestion is. Please see RFC 8033 for details.
*/
if (vars->prob < MAX_PROB / 10) {
alpha >>= 1;
beta >>= 1;
power = 100;
while (vars->prob < div_u64(MAX_PROB, power) &&
power <= 1000000) {
alpha >>= 2;
beta >>= 2;
power *= 10;
}
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
}
/* alpha and beta should be between 0 and 32, in multiples of 1/16 */
delta += alpha * (qdelay - params->target);
delta += beta * (qdelay - qdelay_old);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
oldprob = vars->prob;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
/* to ensure we increase probability in steps of no more than 2% */
if (delta > (s64)(MAX_PROB / (100 / 2)) &&
vars->prob >= MAX_PROB / 10)
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
delta = (MAX_PROB / 100) * 2;
/* Non-linear drop:
* Tune drop probability to increase quickly for high delays(>= 250ms)
* 250ms is derived through experiments and provides error protection
*/
if (qdelay > (PSCHED_NS2TICKS(250 * NSEC_PER_MSEC)))
delta += MAX_PROB / (100 / 2);
vars->prob += delta;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
if (delta > 0) {
/* prevent overflow */
if (vars->prob < oldprob) {
vars->prob = MAX_PROB;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
/* Prevent normalization error. If probability is at
* maximum value already, we normalize it here, and
* skip the check to do a non-linear drop in the next
* section.
*/
update_prob = false;
}
} else {
/* prevent underflow */
if (vars->prob > oldprob)
vars->prob = 0;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
}
/* Non-linear drop in probability: Reduce drop probability quickly if
* delay is 0 for 2 consecutive Tupdate periods.
*/
net: sched: pie: fix coding style issues Fix 5 warnings and 14 checks issued by checkpatch.pl: CHECK: Logical continuations should be on the previous line + if ((q->vars.qdelay < q->params.target / 2) + && (q->vars.prob < MAX_PROB / 5)) WARNING: line over 80 characters + q->params.tupdate = usecs_to_jiffies(nla_get_u32(tb[TCA_PIE_TUPDATE])); CHECK: Blank lines aren't necessary after an open brace '{' +{ + CHECK: braces {} should be used on all arms of this statement + if (qlen < QUEUE_THRESHOLD) [...] + else { [...] CHECK: Unbalanced braces around else statement + else { CHECK: No space is necessary after a cast + if (delta > (s32) (MAX_PROB / (100 / 2)) && CHECK: Unnecessary parentheses around 'qdelay == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'qdelay_old == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'q->vars.prob == 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Unnecessary parentheses around 'q->vars.avg_dq_rate > 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: Comparison to NULL could be written "!opts" + if (opts == NULL) CHECK: No space is necessary after a cast + ((u32) PSCHED_TICKS2NS(q->params.target)) / WARNING: line over 80 characters + nla_put_u32(skb, TCA_PIE_TUPDATE, jiffies_to_usecs(q->params.tupdate)) || CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: No space is necessary after a cast + .delay = ((u32) PSCHED_TICKS2NS(q->vars.qdelay)) / WARNING: Missing a blank line after declarations + struct sk_buff *skb; + skb = qdisc_dequeue_head(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + qdisc_reset_queue(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + q->params.tupdate = 0; Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-06 19:52:45 +00:00
if (qdelay == 0 && qdelay_old == 0 && update_prob)
/* Reduce drop probability to 98.4% */
vars->prob -= vars->prob / 64;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
vars->qdelay = qdelay;
vars->backlog_old = backlog;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
/* We restart the measurement cycle if the following conditions are met
* 1. If the delay has been low for 2 consecutive Tupdate periods
* 2. Calculated drop probability is zero
* 3. If average dq_rate_estimator is enabled, we have at least one
* estimate for the avg_dq_rate ie., is a non-zero value
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
*/
if ((vars->qdelay < params->target / 2) &&
(vars->qdelay_old < params->target / 2) &&
vars->prob == 0 &&
(!params->dq_rate_estimator || vars->avg_dq_rate > 0)) {
pie_vars_init(vars);
}
if (!params->dq_rate_estimator)
vars->qdelay_old = qdelay;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
}
EXPORT_SYMBOL_GPL(pie_calculate_probability);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
static void pie_timer(struct timer_list *t)
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
{
struct pie_sched_data *q = from_timer(q, t, adapt_timer);
struct Qdisc *sch = q->sch;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
spinlock_t *root_lock = qdisc_lock(qdisc_root_sleeping(sch));
spin_lock(root_lock);
pie_calculate_probability(&q->params, &q->vars, sch->qstats.backlog);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
/* reset the timer to fire after 'tupdate'. tupdate is in jiffies. */
if (q->params.tupdate)
mod_timer(&q->adapt_timer, jiffies + q->params.tupdate);
spin_unlock(root_lock);
}
static int pie_init(struct Qdisc *sch, struct nlattr *opt,
struct netlink_ext_ack *extack)
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
{
struct pie_sched_data *q = qdisc_priv(sch);
pie_params_init(&q->params);
pie_vars_init(&q->vars);
sch->limit = q->params.limit;
q->sch = sch;
timer_setup(&q->adapt_timer, pie_timer, 0);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
if (opt) {
int err = pie_change(sch, opt, extack);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
if (err)
return err;
}
mod_timer(&q->adapt_timer, jiffies + HZ / 2);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
return 0;
}
static int pie_dump(struct Qdisc *sch, struct sk_buff *skb)
{
struct pie_sched_data *q = qdisc_priv(sch);
struct nlattr *opts;
opts = nla_nest_start_noflag(skb, TCA_OPTIONS);
net: sched: pie: fix coding style issues Fix 5 warnings and 14 checks issued by checkpatch.pl: CHECK: Logical continuations should be on the previous line + if ((q->vars.qdelay < q->params.target / 2) + && (q->vars.prob < MAX_PROB / 5)) WARNING: line over 80 characters + q->params.tupdate = usecs_to_jiffies(nla_get_u32(tb[TCA_PIE_TUPDATE])); CHECK: Blank lines aren't necessary after an open brace '{' +{ + CHECK: braces {} should be used on all arms of this statement + if (qlen < QUEUE_THRESHOLD) [...] + else { [...] CHECK: Unbalanced braces around else statement + else { CHECK: No space is necessary after a cast + if (delta > (s32) (MAX_PROB / (100 / 2)) && CHECK: Unnecessary parentheses around 'qdelay == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'qdelay_old == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'q->vars.prob == 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Unnecessary parentheses around 'q->vars.avg_dq_rate > 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: Comparison to NULL could be written "!opts" + if (opts == NULL) CHECK: No space is necessary after a cast + ((u32) PSCHED_TICKS2NS(q->params.target)) / WARNING: line over 80 characters + nla_put_u32(skb, TCA_PIE_TUPDATE, jiffies_to_usecs(q->params.tupdate)) || CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: No space is necessary after a cast + .delay = ((u32) PSCHED_TICKS2NS(q->vars.qdelay)) / WARNING: Missing a blank line after declarations + struct sk_buff *skb; + skb = qdisc_dequeue_head(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + qdisc_reset_queue(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + q->params.tupdate = 0; Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-06 19:52:45 +00:00
if (!opts)
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
goto nla_put_failure;
/* convert target from pschedtime to us */
if (nla_put_u32(skb, TCA_PIE_TARGET,
net: sched: pie: fix coding style issues Fix 5 warnings and 14 checks issued by checkpatch.pl: CHECK: Logical continuations should be on the previous line + if ((q->vars.qdelay < q->params.target / 2) + && (q->vars.prob < MAX_PROB / 5)) WARNING: line over 80 characters + q->params.tupdate = usecs_to_jiffies(nla_get_u32(tb[TCA_PIE_TUPDATE])); CHECK: Blank lines aren't necessary after an open brace '{' +{ + CHECK: braces {} should be used on all arms of this statement + if (qlen < QUEUE_THRESHOLD) [...] + else { [...] CHECK: Unbalanced braces around else statement + else { CHECK: No space is necessary after a cast + if (delta > (s32) (MAX_PROB / (100 / 2)) && CHECK: Unnecessary parentheses around 'qdelay == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'qdelay_old == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'q->vars.prob == 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Unnecessary parentheses around 'q->vars.avg_dq_rate > 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: Comparison to NULL could be written "!opts" + if (opts == NULL) CHECK: No space is necessary after a cast + ((u32) PSCHED_TICKS2NS(q->params.target)) / WARNING: line over 80 characters + nla_put_u32(skb, TCA_PIE_TUPDATE, jiffies_to_usecs(q->params.tupdate)) || CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: No space is necessary after a cast + .delay = ((u32) PSCHED_TICKS2NS(q->vars.qdelay)) / WARNING: Missing a blank line after declarations + struct sk_buff *skb; + skb = qdisc_dequeue_head(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + qdisc_reset_queue(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + q->params.tupdate = 0; Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-06 19:52:45 +00:00
((u32)PSCHED_TICKS2NS(q->params.target)) /
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
NSEC_PER_USEC) ||
nla_put_u32(skb, TCA_PIE_LIMIT, sch->limit) ||
net: sched: pie: fix coding style issues Fix 5 warnings and 14 checks issued by checkpatch.pl: CHECK: Logical continuations should be on the previous line + if ((q->vars.qdelay < q->params.target / 2) + && (q->vars.prob < MAX_PROB / 5)) WARNING: line over 80 characters + q->params.tupdate = usecs_to_jiffies(nla_get_u32(tb[TCA_PIE_TUPDATE])); CHECK: Blank lines aren't necessary after an open brace '{' +{ + CHECK: braces {} should be used on all arms of this statement + if (qlen < QUEUE_THRESHOLD) [...] + else { [...] CHECK: Unbalanced braces around else statement + else { CHECK: No space is necessary after a cast + if (delta > (s32) (MAX_PROB / (100 / 2)) && CHECK: Unnecessary parentheses around 'qdelay == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'qdelay_old == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'q->vars.prob == 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Unnecessary parentheses around 'q->vars.avg_dq_rate > 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: Comparison to NULL could be written "!opts" + if (opts == NULL) CHECK: No space is necessary after a cast + ((u32) PSCHED_TICKS2NS(q->params.target)) / WARNING: line over 80 characters + nla_put_u32(skb, TCA_PIE_TUPDATE, jiffies_to_usecs(q->params.tupdate)) || CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: No space is necessary after a cast + .delay = ((u32) PSCHED_TICKS2NS(q->vars.qdelay)) / WARNING: Missing a blank line after declarations + struct sk_buff *skb; + skb = qdisc_dequeue_head(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + qdisc_reset_queue(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + q->params.tupdate = 0; Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-06 19:52:45 +00:00
nla_put_u32(skb, TCA_PIE_TUPDATE,
jiffies_to_usecs(q->params.tupdate)) ||
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
nla_put_u32(skb, TCA_PIE_ALPHA, q->params.alpha) ||
nla_put_u32(skb, TCA_PIE_BETA, q->params.beta) ||
nla_put_u32(skb, TCA_PIE_ECN, q->params.ecn) ||
nla_put_u32(skb, TCA_PIE_BYTEMODE, q->params.bytemode) ||
nla_put_u32(skb, TCA_PIE_DQ_RATE_ESTIMATOR,
q->params.dq_rate_estimator))
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
goto nla_put_failure;
return nla_nest_end(skb, opts);
nla_put_failure:
nla_nest_cancel(skb, opts);
return -1;
}
static int pie_dump_stats(struct Qdisc *sch, struct gnet_dump *d)
{
struct pie_sched_data *q = qdisc_priv(sch);
struct tc_pie_xstats st = {
.prob = q->vars.prob << BITS_PER_BYTE,
net: sched: pie: fix coding style issues Fix 5 warnings and 14 checks issued by checkpatch.pl: CHECK: Logical continuations should be on the previous line + if ((q->vars.qdelay < q->params.target / 2) + && (q->vars.prob < MAX_PROB / 5)) WARNING: line over 80 characters + q->params.tupdate = usecs_to_jiffies(nla_get_u32(tb[TCA_PIE_TUPDATE])); CHECK: Blank lines aren't necessary after an open brace '{' +{ + CHECK: braces {} should be used on all arms of this statement + if (qlen < QUEUE_THRESHOLD) [...] + else { [...] CHECK: Unbalanced braces around else statement + else { CHECK: No space is necessary after a cast + if (delta > (s32) (MAX_PROB / (100 / 2)) && CHECK: Unnecessary parentheses around 'qdelay == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'qdelay_old == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'q->vars.prob == 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Unnecessary parentheses around 'q->vars.avg_dq_rate > 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: Comparison to NULL could be written "!opts" + if (opts == NULL) CHECK: No space is necessary after a cast + ((u32) PSCHED_TICKS2NS(q->params.target)) / WARNING: line over 80 characters + nla_put_u32(skb, TCA_PIE_TUPDATE, jiffies_to_usecs(q->params.tupdate)) || CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: No space is necessary after a cast + .delay = ((u32) PSCHED_TICKS2NS(q->vars.qdelay)) / WARNING: Missing a blank line after declarations + struct sk_buff *skb; + skb = qdisc_dequeue_head(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + qdisc_reset_queue(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + q->params.tupdate = 0; Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-06 19:52:45 +00:00
.delay = ((u32)PSCHED_TICKS2NS(q->vars.qdelay)) /
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
NSEC_PER_USEC,
.packets_in = q->stats.packets_in,
.overlimit = q->stats.overlimit,
.maxq = q->stats.maxq,
.dropped = q->stats.dropped,
.ecn_mark = q->stats.ecn_mark,
};
/* avg_dq_rate is only valid if dq_rate_estimator is enabled */
st.dq_rate_estimating = q->params.dq_rate_estimator;
/* unscale and return dq_rate in bytes per sec */
if (q->params.dq_rate_estimator)
st.avg_dq_rate = q->vars.avg_dq_rate *
(PSCHED_TICKS_PER_SEC) >> PIE_SCALE;
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
return gnet_stats_copy_app(d, &st, sizeof(st));
}
static struct sk_buff *pie_qdisc_dequeue(struct Qdisc *sch)
{
struct pie_sched_data *q = qdisc_priv(sch);
net: sched: pie: fix coding style issues Fix 5 warnings and 14 checks issued by checkpatch.pl: CHECK: Logical continuations should be on the previous line + if ((q->vars.qdelay < q->params.target / 2) + && (q->vars.prob < MAX_PROB / 5)) WARNING: line over 80 characters + q->params.tupdate = usecs_to_jiffies(nla_get_u32(tb[TCA_PIE_TUPDATE])); CHECK: Blank lines aren't necessary after an open brace '{' +{ + CHECK: braces {} should be used on all arms of this statement + if (qlen < QUEUE_THRESHOLD) [...] + else { [...] CHECK: Unbalanced braces around else statement + else { CHECK: No space is necessary after a cast + if (delta > (s32) (MAX_PROB / (100 / 2)) && CHECK: Unnecessary parentheses around 'qdelay == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'qdelay_old == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'q->vars.prob == 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Unnecessary parentheses around 'q->vars.avg_dq_rate > 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: Comparison to NULL could be written "!opts" + if (opts == NULL) CHECK: No space is necessary after a cast + ((u32) PSCHED_TICKS2NS(q->params.target)) / WARNING: line over 80 characters + nla_put_u32(skb, TCA_PIE_TUPDATE, jiffies_to_usecs(q->params.tupdate)) || CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: No space is necessary after a cast + .delay = ((u32) PSCHED_TICKS2NS(q->vars.qdelay)) / WARNING: Missing a blank line after declarations + struct sk_buff *skb; + skb = qdisc_dequeue_head(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + qdisc_reset_queue(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + q->params.tupdate = 0; Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-06 19:52:45 +00:00
struct sk_buff *skb = qdisc_dequeue_head(sch);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
if (!skb)
return NULL;
pie_process_dequeue(skb, &q->params, &q->vars, sch->qstats.backlog);
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
return skb;
}
static void pie_reset(struct Qdisc *sch)
{
struct pie_sched_data *q = qdisc_priv(sch);
net: sched: pie: fix coding style issues Fix 5 warnings and 14 checks issued by checkpatch.pl: CHECK: Logical continuations should be on the previous line + if ((q->vars.qdelay < q->params.target / 2) + && (q->vars.prob < MAX_PROB / 5)) WARNING: line over 80 characters + q->params.tupdate = usecs_to_jiffies(nla_get_u32(tb[TCA_PIE_TUPDATE])); CHECK: Blank lines aren't necessary after an open brace '{' +{ + CHECK: braces {} should be used on all arms of this statement + if (qlen < QUEUE_THRESHOLD) [...] + else { [...] CHECK: Unbalanced braces around else statement + else { CHECK: No space is necessary after a cast + if (delta > (s32) (MAX_PROB / (100 / 2)) && CHECK: Unnecessary parentheses around 'qdelay == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'qdelay_old == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'q->vars.prob == 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Unnecessary parentheses around 'q->vars.avg_dq_rate > 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: Comparison to NULL could be written "!opts" + if (opts == NULL) CHECK: No space is necessary after a cast + ((u32) PSCHED_TICKS2NS(q->params.target)) / WARNING: line over 80 characters + nla_put_u32(skb, TCA_PIE_TUPDATE, jiffies_to_usecs(q->params.tupdate)) || CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: No space is necessary after a cast + .delay = ((u32) PSCHED_TICKS2NS(q->vars.qdelay)) / WARNING: Missing a blank line after declarations + struct sk_buff *skb; + skb = qdisc_dequeue_head(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + qdisc_reset_queue(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + q->params.tupdate = 0; Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-06 19:52:45 +00:00
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
qdisc_reset_queue(sch);
pie_vars_init(&q->vars);
}
static void pie_destroy(struct Qdisc *sch)
{
struct pie_sched_data *q = qdisc_priv(sch);
net: sched: pie: fix coding style issues Fix 5 warnings and 14 checks issued by checkpatch.pl: CHECK: Logical continuations should be on the previous line + if ((q->vars.qdelay < q->params.target / 2) + && (q->vars.prob < MAX_PROB / 5)) WARNING: line over 80 characters + q->params.tupdate = usecs_to_jiffies(nla_get_u32(tb[TCA_PIE_TUPDATE])); CHECK: Blank lines aren't necessary after an open brace '{' +{ + CHECK: braces {} should be used on all arms of this statement + if (qlen < QUEUE_THRESHOLD) [...] + else { [...] CHECK: Unbalanced braces around else statement + else { CHECK: No space is necessary after a cast + if (delta > (s32) (MAX_PROB / (100 / 2)) && CHECK: Unnecessary parentheses around 'qdelay == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'qdelay_old == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'q->vars.prob == 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Unnecessary parentheses around 'q->vars.avg_dq_rate > 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: Comparison to NULL could be written "!opts" + if (opts == NULL) CHECK: No space is necessary after a cast + ((u32) PSCHED_TICKS2NS(q->params.target)) / WARNING: line over 80 characters + nla_put_u32(skb, TCA_PIE_TUPDATE, jiffies_to_usecs(q->params.tupdate)) || CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: No space is necessary after a cast + .delay = ((u32) PSCHED_TICKS2NS(q->vars.qdelay)) / WARNING: Missing a blank line after declarations + struct sk_buff *skb; + skb = qdisc_dequeue_head(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + qdisc_reset_queue(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + q->params.tupdate = 0; Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-06 19:52:45 +00:00
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
q->params.tupdate = 0;
del_timer_sync(&q->adapt_timer);
}
static struct Qdisc_ops pie_qdisc_ops __read_mostly = {
.id = "pie",
net: pkt_sched: PIE AQM scheme Proportional Integral controller Enhanced (PIE) is a scheduler to address the bufferbloat problem. >From the IETF draft below: " Bufferbloat is a phenomenon where excess buffers in the network cause high latency and jitter. As more and more interactive applications (e.g. voice over IP, real time video streaming and financial transactions) run in the Internet, high latency and jitter degrade application performance. There is a pressing need to design intelligent queue management schemes that can control latency and jitter; and hence provide desirable quality of service to users. We present here a lightweight design, PIE(Proportional Integral controller Enhanced) that can effectively control the average queueing latency to a target value. Simulation results, theoretical analysis and Linux testbed results have shown that PIE can ensure low latency and achieve high link utilization under various congestion situations. The design does not require per-packet timestamp, so it incurs very small overhead and is simple enough to implement in both hardware and software. " Many thanks to Dave Taht for extensive feedback, reviews, testing and suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and suggestions. Naeem Khademi and Dave Taht independently contributed to ECN support. For more information, please see technical paper about PIE in the IEEE Conference on High Performance Switching and Routing 2013. A copy of the paper can be found at ftp://ftpeng.cisco.com/pie/. Please also refer to the IETF draft submission at http://tools.ietf.org/html/draft-pan-tsvwg-pie-00 All relevant code, documents and test scripts and results can be found at ftp://ftpeng.cisco.com/pie/. For problems with the iproute2/tc or Linux kernel code, please contact Vijay Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu (mysuryan@cisco.com) Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Mythili Prabhu <mysuryan@cisco.com> CC: Dave Taht <dave.taht@bufferbloat.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05 01:33:55 +00:00
.priv_size = sizeof(struct pie_sched_data),
.enqueue = pie_qdisc_enqueue,
.dequeue = pie_qdisc_dequeue,
.peek = qdisc_peek_dequeued,
.init = pie_init,
.destroy = pie_destroy,
.reset = pie_reset,
.change = pie_change,
.dump = pie_dump,
.dump_stats = pie_dump_stats,
.owner = THIS_MODULE,
};
static int __init pie_module_init(void)
{
return register_qdisc(&pie_qdisc_ops);
}
static void __exit pie_module_exit(void)
{
unregister_qdisc(&pie_qdisc_ops);
}
module_init(pie_module_init);
module_exit(pie_module_exit);
MODULE_DESCRIPTION("Proportional Integral controller Enhanced (PIE) scheduler");
MODULE_AUTHOR("Vijay Subramanian");
MODULE_AUTHOR("Mythili Prabhu");
MODULE_LICENSE("GPL");