linux-stable/drivers/scsi/3w-9xxx.c

2330 lines
75 KiB
C
Raw Normal View History

/*
3w-9xxx.c -- 3ware 9000 Storage Controller device driver for Linux.
Written By: Adam Radford <aradford@gmail.com>
Modifications By: Tom Couch
Copyright (C) 2004-2009 Applied Micro Circuits Corporation.
Copyright (C) 2010 LSI Corporation.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; version 2 of the License.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
NO WARRANTY
THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
solely responsible for determining the appropriateness of using and
distributing the Program and assumes all risks associated with its
exercise of rights under this Agreement, including but not limited to
the risks and costs of program errors, damage to or loss of data,
programs or equipment, and unavailability or interruption of operations.
DISCLAIMER OF LIABILITY
NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Bugs/Comments/Suggestions should be mailed to:
aradford@gmail.com
Note: This version of the driver does not contain a bundled firmware
image.
History
-------
2.26.02.000 - Driver cleanup for kernel submission.
2.26.02.001 - Replace schedule_timeout() calls with msleep().
2.26.02.002 - Add support for PAE mode.
Add lun support.
Fix twa_remove() to free irq handler/unregister_chrdev()
before shutting down card.
Change to new 'change_queue_depth' api.
Fix 'handled=1' ISR usage, remove bogus IRQ check.
Remove un-needed eh_abort handler.
Add support for embedded firmware error strings.
2.26.02.003 - Correctly handle single sgl's with use_sg=1.
2.26.02.004 - Add support for 9550SX controllers.
2.26.02.005 - Fix use_sg == 0 mapping on systems with 4GB or higher.
2.26.02.006 - Fix 9550SX pchip reset timeout.
Add big endian support.
2.26.02.007 - Disable local interrupts during kmap/unmap_atomic().
2.26.02.008 - Free irq handler in __twa_shutdown().
Serialize reset code.
Add support for 9650SE controllers.
2.26.02.009 - Fix dma mask setting to fallback to 32-bit if 64-bit fails.
2.26.02.010 - Add support for 9690SA controllers.
2.26.02.011 - Increase max AENs drained to 256.
Add MSI support and "use_msi" module parameter.
Fix bug in twa_get_param() on 4GB+.
Use pci_resource_len() for ioremap().
2.26.02.012 - Add power management support.
2.26.02.013 - Fix bug in twa_load_sgl().
2.26.02.014 - Force 60 second timeout default.
*/
#include <linux/module.h>
#include <linux/reboot.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/moduleparam.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/time.h>
#include <linux/mutex.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/uaccess.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_cmnd.h>
#include "3w-9xxx.h"
/* Globals */
#define TW_DRIVER_VERSION "2.26.02.014"
static DEFINE_MUTEX(twa_chrdev_mutex);
static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT];
static unsigned int twa_device_extension_count;
static int twa_major = -1;
extern struct timezone sys_tz;
/* Module parameters */
MODULE_AUTHOR ("LSI");
MODULE_DESCRIPTION ("3ware 9000 Storage Controller Linux Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(TW_DRIVER_VERSION);
static int use_msi = 0;
module_param(use_msi, int, S_IRUGO);
MODULE_PARM_DESC(use_msi, "Use Message Signaled Interrupts. Default: 0");
/* Function prototypes */
static void twa_aen_queue_event(TW_Device_Extension *tw_dev, TW_Command_Apache_Header *header);
static int twa_aen_read_queue(TW_Device_Extension *tw_dev, int request_id);
static char *twa_aen_severity_lookup(unsigned char severity_code);
static void twa_aen_sync_time(TW_Device_Extension *tw_dev, int request_id);
static long twa_chrdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
static int twa_chrdev_open(struct inode *inode, struct file *file);
static int twa_fill_sense(TW_Device_Extension *tw_dev, int request_id, int copy_sense, int print_host);
static void twa_free_request_id(TW_Device_Extension *tw_dev,int request_id);
static void twa_get_request_id(TW_Device_Extension *tw_dev, int *request_id);
static int twa_initconnection(TW_Device_Extension *tw_dev, int message_credits,
u32 set_features, unsigned short current_fw_srl,
unsigned short current_fw_arch_id,
unsigned short current_fw_branch,
unsigned short current_fw_build,
unsigned short *fw_on_ctlr_srl,
unsigned short *fw_on_ctlr_arch_id,
unsigned short *fw_on_ctlr_branch,
unsigned short *fw_on_ctlr_build,
u32 *init_connect_result);
static void twa_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full *full_command_packet, int request_id, dma_addr_t dma_handle, int length);
static int twa_poll_response(TW_Device_Extension *tw_dev, int request_id, int seconds);
static int twa_poll_status_gone(TW_Device_Extension *tw_dev, u32 flag, int seconds);
static int twa_post_command_packet(TW_Device_Extension *tw_dev, int request_id, char internal);
static int twa_reset_device_extension(TW_Device_Extension *tw_dev);
static int twa_reset_sequence(TW_Device_Extension *tw_dev, int soft_reset);
static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
unsigned char *cdb, int use_sg,
TW_SG_Entry *sglistarg);
static void twa_scsiop_execute_scsi_complete(TW_Device_Extension *tw_dev, int request_id);
static char *twa_string_lookup(twa_message_type *table, unsigned int aen_code);
/* Functions */
/* Show some statistics about the card */
static ssize_t twa_show_stats(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *host = class_to_shost(dev);
TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
unsigned long flags = 0;
ssize_t len;
spin_lock_irqsave(tw_dev->host->host_lock, flags);
len = snprintf(buf, PAGE_SIZE, "3w-9xxx Driver version: %s\n"
"Current commands posted: %4d\n"
"Max commands posted: %4d\n"
"Current pending commands: %4d\n"
"Max pending commands: %4d\n"
"Last sgl length: %4d\n"
"Max sgl length: %4d\n"
"Last sector count: %4d\n"
"Max sector count: %4d\n"
"SCSI Host Resets: %4d\n"
"AEN's: %4d\n",
TW_DRIVER_VERSION,
tw_dev->posted_request_count,
tw_dev->max_posted_request_count,
tw_dev->pending_request_count,
tw_dev->max_pending_request_count,
tw_dev->sgl_entries,
tw_dev->max_sgl_entries,
tw_dev->sector_count,
tw_dev->max_sector_count,
tw_dev->num_resets,
tw_dev->aen_count);
spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
return len;
} /* End twa_show_stats() */
/* Create sysfs 'stats' entry */
static struct device_attribute twa_host_stats_attr = {
.attr = {
.name = "stats",
.mode = S_IRUGO,
},
.show = twa_show_stats
};
/* Host attributes initializer */
static struct device_attribute *twa_host_attrs[] = {
&twa_host_stats_attr,
NULL,
};
/* File operations struct for character device */
static const struct file_operations twa_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = twa_chrdev_ioctl,
.open = twa_chrdev_open,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.release = NULL,
.llseek = noop_llseek,
};
/*
* The controllers use an inline buffer instead of a mapped SGL for small,
* single entry buffers. Note that we treat a zero-length transfer like
* a mapped SGL.
*/
static bool twa_command_mapped(struct scsi_cmnd *cmd)
{
return scsi_sg_count(cmd) != 1 ||
scsi_bufflen(cmd) >= TW_MIN_SGL_LENGTH;
}
/* This function will complete an aen request from the isr */
static int twa_aen_complete(TW_Device_Extension *tw_dev, int request_id)
{
TW_Command_Full *full_command_packet;
TW_Command *command_packet;
TW_Command_Apache_Header *header;
unsigned short aen;
int retval = 1;
header = (TW_Command_Apache_Header *)tw_dev->generic_buffer_virt[request_id];
tw_dev->posted_request_count--;
aen = le16_to_cpu(header->status_block.error);
full_command_packet = tw_dev->command_packet_virt[request_id];
command_packet = &full_command_packet->command.oldcommand;
/* First check for internal completion of set param for time sync */
if (TW_OP_OUT(command_packet->opcode__sgloffset) == TW_OP_SET_PARAM) {
/* Keep reading the queue in case there are more aen's */
if (twa_aen_read_queue(tw_dev, request_id))
goto out2;
else {
retval = 0;
goto out;
}
}
switch (aen) {
case TW_AEN_QUEUE_EMPTY:
/* Quit reading the queue if this is the last one */
break;
case TW_AEN_SYNC_TIME_WITH_HOST:
twa_aen_sync_time(tw_dev, request_id);
retval = 0;
goto out;
default:
twa_aen_queue_event(tw_dev, header);
/* If there are more aen's, keep reading the queue */
if (twa_aen_read_queue(tw_dev, request_id))
goto out2;
else {
retval = 0;
goto out;
}
}
retval = 0;
out2:
tw_dev->state[request_id] = TW_S_COMPLETED;
twa_free_request_id(tw_dev, request_id);
clear_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags);
out:
return retval;
} /* End twa_aen_complete() */
/* This function will drain aen queue */
static int twa_aen_drain_queue(TW_Device_Extension *tw_dev, int no_check_reset)
{
int request_id = 0;
unsigned char cdb[TW_MAX_CDB_LEN];
TW_SG_Entry sglist[1];
int finished = 0, count = 0;
TW_Command_Full *full_command_packet;
TW_Command_Apache_Header *header;
unsigned short aen;
int first_reset = 0, queue = 0, retval = 1;
if (no_check_reset)
first_reset = 0;
else
first_reset = 1;
full_command_packet = tw_dev->command_packet_virt[request_id];
memset(full_command_packet, 0, sizeof(TW_Command_Full));
/* Initialize cdb */
memset(&cdb, 0, TW_MAX_CDB_LEN);
cdb[0] = REQUEST_SENSE; /* opcode */
cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */
/* Initialize sglist */
memset(&sglist, 0, sizeof(TW_SG_Entry));
sglist[0].length = TW_SECTOR_SIZE;
sglist[0].address = tw_dev->generic_buffer_phys[request_id];
if (sglist[0].address & TW_ALIGNMENT_9000_SGL) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1, "Found unaligned address during AEN drain");
goto out;
}
/* Mark internal command */
tw_dev->srb[request_id] = NULL;
do {
/* Send command to the board */
if (twa_scsiop_execute_scsi(tw_dev, request_id, cdb, 1, sglist)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2, "Error posting request sense");
goto out;
}
/* Now poll for completion */
if (twa_poll_response(tw_dev, request_id, 30)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x3, "No valid response while draining AEN queue");
tw_dev->posted_request_count--;
goto out;
}
tw_dev->posted_request_count--;
header = (TW_Command_Apache_Header *)tw_dev->generic_buffer_virt[request_id];
aen = le16_to_cpu(header->status_block.error);
queue = 0;
count++;
switch (aen) {
case TW_AEN_QUEUE_EMPTY:
if (first_reset != 1)
goto out;
else
finished = 1;
break;
case TW_AEN_SOFT_RESET:
if (first_reset == 0)
first_reset = 1;
else
queue = 1;
break;
case TW_AEN_SYNC_TIME_WITH_HOST:
break;
default:
queue = 1;
}
/* Now queue an event info */
if (queue)
twa_aen_queue_event(tw_dev, header);
} while ((finished == 0) && (count < TW_MAX_AEN_DRAIN));
if (count == TW_MAX_AEN_DRAIN)
goto out;
retval = 0;
out:
tw_dev->state[request_id] = TW_S_INITIAL;
return retval;
} /* End twa_aen_drain_queue() */
/* This function will queue an event */
static void twa_aen_queue_event(TW_Device_Extension *tw_dev, TW_Command_Apache_Header *header)
{
u32 local_time;
TW_Event *event;
unsigned short aen;
char host[16];
char *error_str;
tw_dev->aen_count++;
/* Fill out event info */
event = tw_dev->event_queue[tw_dev->error_index];
/* Check for clobber */
host[0] = '\0';
if (tw_dev->host) {
sprintf(host, " scsi%d:", tw_dev->host->host_no);
if (event->retrieved == TW_AEN_NOT_RETRIEVED)
tw_dev->aen_clobber = 1;
}
aen = le16_to_cpu(header->status_block.error);
memset(event, 0, sizeof(TW_Event));
event->severity = TW_SEV_OUT(header->status_block.severity__reserved);
/* event->time_stamp_sec overflows in y2106 */
local_time = (u32)(ktime_get_real_seconds() - (sys_tz.tz_minuteswest * 60));
event->time_stamp_sec = local_time;
event->aen_code = aen;
event->retrieved = TW_AEN_NOT_RETRIEVED;
event->sequence_id = tw_dev->error_sequence_id;
tw_dev->error_sequence_id++;
/* Check for embedded error string */
error_str = &(header->err_specific_desc[strlen(header->err_specific_desc)+1]);
header->err_specific_desc[sizeof(header->err_specific_desc) - 1] = '\0';
event->parameter_len = strlen(header->err_specific_desc);
memcpy(event->parameter_data, header->err_specific_desc, event->parameter_len + (error_str[0] == '\0' ? 0 : (1 + strlen(error_str))));
if (event->severity != TW_AEN_SEVERITY_DEBUG)
printk(KERN_WARNING "3w-9xxx:%s AEN: %s (0x%02X:0x%04X): %s:%s.\n",
host,
twa_aen_severity_lookup(TW_SEV_OUT(header->status_block.severity__reserved)),
TW_MESSAGE_SOURCE_CONTROLLER_EVENT, aen,
error_str[0] == '\0' ? twa_string_lookup(twa_aen_table, aen) : error_str,
header->err_specific_desc);
else
tw_dev->aen_count--;
if ((tw_dev->error_index + 1) == TW_Q_LENGTH)
tw_dev->event_queue_wrapped = 1;
tw_dev->error_index = (tw_dev->error_index + 1 ) % TW_Q_LENGTH;
} /* End twa_aen_queue_event() */
/* This function will read the aen queue from the isr */
static int twa_aen_read_queue(TW_Device_Extension *tw_dev, int request_id)
{
unsigned char cdb[TW_MAX_CDB_LEN];
TW_SG_Entry sglist[1];
TW_Command_Full *full_command_packet;
int retval = 1;
full_command_packet = tw_dev->command_packet_virt[request_id];
memset(full_command_packet, 0, sizeof(TW_Command_Full));
/* Initialize cdb */
memset(&cdb, 0, TW_MAX_CDB_LEN);
cdb[0] = REQUEST_SENSE; /* opcode */
cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */
/* Initialize sglist */
memset(&sglist, 0, sizeof(TW_SG_Entry));
sglist[0].length = TW_SECTOR_SIZE;
sglist[0].address = tw_dev->generic_buffer_phys[request_id];
/* Mark internal command */
tw_dev->srb[request_id] = NULL;
/* Now post the command packet */
if (twa_scsiop_execute_scsi(tw_dev, request_id, cdb, 1, sglist)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x4, "Post failed while reading AEN queue");
goto out;
}
retval = 0;
out:
return retval;
} /* End twa_aen_read_queue() */
/* This function will look up an AEN severity string */
static char *twa_aen_severity_lookup(unsigned char severity_code)
{
char *retval = NULL;
if ((severity_code < (unsigned char) TW_AEN_SEVERITY_ERROR) ||
(severity_code > (unsigned char) TW_AEN_SEVERITY_DEBUG))
goto out;
retval = twa_aen_severity_table[severity_code];
out:
return retval;
} /* End twa_aen_severity_lookup() */
/* This function will sync firmware time with the host time */
static void twa_aen_sync_time(TW_Device_Extension *tw_dev, int request_id)
{
u32 schedulertime;
TW_Command_Full *full_command_packet;
TW_Command *command_packet;
TW_Param_Apache *param;
time64_t local_time;
/* Fill out the command packet */
full_command_packet = tw_dev->command_packet_virt[request_id];
memset(full_command_packet, 0, sizeof(TW_Command_Full));
command_packet = &full_command_packet->command.oldcommand;
command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_SET_PARAM);
command_packet->request_id = request_id;
command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]);
command_packet->byte8_offset.param.sgl[0].length = cpu_to_le32(TW_SECTOR_SIZE);
command_packet->size = TW_COMMAND_SIZE;
command_packet->byte6_offset.parameter_count = cpu_to_le16(1);
/* Setup the param */
param = (TW_Param_Apache *)tw_dev->generic_buffer_virt[request_id];
memset(param, 0, TW_SECTOR_SIZE);
param->table_id = cpu_to_le16(TW_TIMEKEEP_TABLE | 0x8000); /* Controller time keep table */
param->parameter_id = cpu_to_le16(0x3); /* SchedulerTime */
param->parameter_size_bytes = cpu_to_le16(4);
/* Convert system time in UTC to local time seconds since last
Sunday 12:00AM */
local_time = (ktime_get_real_seconds() - (sys_tz.tz_minuteswest * 60));
div_u64_rem(local_time - (3 * 86400), 604800, &schedulertime);
schedulertime = cpu_to_le32(schedulertime % 604800);
memcpy(param->data, &schedulertime, sizeof(u32));
/* Mark internal command */
tw_dev->srb[request_id] = NULL;
/* Now post the command */
twa_post_command_packet(tw_dev, request_id, 1);
} /* End twa_aen_sync_time() */
/* This function will allocate memory and check if it is correctly aligned */
static int twa_allocate_memory(TW_Device_Extension *tw_dev, int size, int which)
{
int i;
dma_addr_t dma_handle;
unsigned long *cpu_addr;
int retval = 1;
cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev,
size * TW_Q_LENGTH, &dma_handle, GFP_KERNEL);
if (!cpu_addr) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x5, "Memory allocation failed");
goto out;
}
if ((unsigned long)cpu_addr % (TW_ALIGNMENT_9000)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x6, "Failed to allocate correctly aligned memory");
dma_free_coherent(&tw_dev->tw_pci_dev->dev, size * TW_Q_LENGTH,
cpu_addr, dma_handle);
goto out;
}
memset(cpu_addr, 0, size*TW_Q_LENGTH);
for (i = 0; i < TW_Q_LENGTH; i++) {
switch(which) {
case 0:
tw_dev->command_packet_phys[i] = dma_handle+(i*size);
tw_dev->command_packet_virt[i] = (TW_Command_Full *)((unsigned char *)cpu_addr + (i*size));
break;
case 1:
tw_dev->generic_buffer_phys[i] = dma_handle+(i*size);
tw_dev->generic_buffer_virt[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size));
break;
}
}
retval = 0;
out:
return retval;
} /* End twa_allocate_memory() */
/* This function will check the status register for unexpected bits */
static int twa_check_bits(u32 status_reg_value)
{
int retval = 1;
if ((status_reg_value & TW_STATUS_EXPECTED_BITS) != TW_STATUS_EXPECTED_BITS)
goto out;
if ((status_reg_value & TW_STATUS_UNEXPECTED_BITS) != 0)
goto out;
retval = 0;
out:
return retval;
} /* End twa_check_bits() */
/* This function will check the srl and decide if we are compatible */
static int twa_check_srl(TW_Device_Extension *tw_dev, int *flashed)
{
int retval = 1;
unsigned short fw_on_ctlr_srl = 0, fw_on_ctlr_arch_id = 0;
unsigned short fw_on_ctlr_branch = 0, fw_on_ctlr_build = 0;
u32 init_connect_result = 0;
if (twa_initconnection(tw_dev, TW_INIT_MESSAGE_CREDITS,
TW_EXTENDED_INIT_CONNECT, TW_CURRENT_DRIVER_SRL,
TW_9000_ARCH_ID, TW_CURRENT_DRIVER_BRANCH,
TW_CURRENT_DRIVER_BUILD, &fw_on_ctlr_srl,
&fw_on_ctlr_arch_id, &fw_on_ctlr_branch,
&fw_on_ctlr_build, &init_connect_result)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x7, "Initconnection failed while checking SRL");
goto out;
}
tw_dev->tw_compat_info.working_srl = fw_on_ctlr_srl;
tw_dev->tw_compat_info.working_branch = fw_on_ctlr_branch;
tw_dev->tw_compat_info.working_build = fw_on_ctlr_build;
/* Try base mode compatibility */
if (!(init_connect_result & TW_CTLR_FW_COMPATIBLE)) {
if (twa_initconnection(tw_dev, TW_INIT_MESSAGE_CREDITS,
TW_EXTENDED_INIT_CONNECT,
TW_BASE_FW_SRL, TW_9000_ARCH_ID,
TW_BASE_FW_BRANCH, TW_BASE_FW_BUILD,
&fw_on_ctlr_srl, &fw_on_ctlr_arch_id,
&fw_on_ctlr_branch, &fw_on_ctlr_build,
&init_connect_result)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xa, "Initconnection (base mode) failed while checking SRL");
goto out;
}
if (!(init_connect_result & TW_CTLR_FW_COMPATIBLE)) {
if (TW_CURRENT_DRIVER_SRL > fw_on_ctlr_srl) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x32, "Firmware and driver incompatibility: please upgrade firmware");
} else {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x33, "Firmware and driver incompatibility: please upgrade driver");
}
goto out;
}
tw_dev->tw_compat_info.working_srl = TW_BASE_FW_SRL;
tw_dev->tw_compat_info.working_branch = TW_BASE_FW_BRANCH;
tw_dev->tw_compat_info.working_build = TW_BASE_FW_BUILD;
}
/* Load rest of compatibility struct */
strlcpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION,
sizeof(tw_dev->tw_compat_info.driver_version));
tw_dev->tw_compat_info.driver_srl_high = TW_CURRENT_DRIVER_SRL;
tw_dev->tw_compat_info.driver_branch_high = TW_CURRENT_DRIVER_BRANCH;
tw_dev->tw_compat_info.driver_build_high = TW_CURRENT_DRIVER_BUILD;
tw_dev->tw_compat_info.driver_srl_low = TW_BASE_FW_SRL;
tw_dev->tw_compat_info.driver_branch_low = TW_BASE_FW_BRANCH;
tw_dev->tw_compat_info.driver_build_low = TW_BASE_FW_BUILD;
tw_dev->tw_compat_info.fw_on_ctlr_srl = fw_on_ctlr_srl;
tw_dev->tw_compat_info.fw_on_ctlr_branch = fw_on_ctlr_branch;
tw_dev->tw_compat_info.fw_on_ctlr_build = fw_on_ctlr_build;
retval = 0;
out:
return retval;
} /* End twa_check_srl() */
/* This function handles ioctl for the character device */
static long twa_chrdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
struct inode *inode = file_inode(file);
long timeout;
unsigned long *cpu_addr, data_buffer_length_adjusted = 0, flags = 0;
dma_addr_t dma_handle;
int request_id = 0;
unsigned int sequence_id = 0;
unsigned char event_index, start_index;
TW_Ioctl_Driver_Command driver_command;
TW_Ioctl_Buf_Apache *tw_ioctl;
TW_Lock *tw_lock;
TW_Command_Full *full_command_packet;
TW_Compatibility_Info *tw_compat_info;
TW_Event *event;
ktime_t current_time;
TW_Device_Extension *tw_dev = twa_device_extension_list[iminor(inode)];
int retval = TW_IOCTL_ERROR_OS_EFAULT;
void __user *argp = (void __user *)arg;
mutex_lock(&twa_chrdev_mutex);
/* Only let one of these through at a time */
if (mutex_lock_interruptible(&tw_dev->ioctl_lock)) {
retval = TW_IOCTL_ERROR_OS_EINTR;
goto out;
}
/* First copy down the driver command */
if (copy_from_user(&driver_command, argp, sizeof(TW_Ioctl_Driver_Command)))
goto out2;
/* Check data buffer size */
if (driver_command.buffer_length > TW_MAX_SECTORS * 2048) {
retval = TW_IOCTL_ERROR_OS_EINVAL;
goto out2;
}
/* Hardware can only do multiple of 512 byte transfers */
data_buffer_length_adjusted = (driver_command.buffer_length + 511) & ~511;
/* Now allocate ioctl buf memory */
cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_Ioctl_Buf_Apache) - 1, &dma_handle, GFP_KERNEL);
if (!cpu_addr) {
retval = TW_IOCTL_ERROR_OS_ENOMEM;
goto out2;
}
tw_ioctl = (TW_Ioctl_Buf_Apache *)cpu_addr;
/* Now copy down the entire ioctl */
if (copy_from_user(tw_ioctl, argp, driver_command.buffer_length + sizeof(TW_Ioctl_Buf_Apache) - 1))
goto out3;
/* See which ioctl we are doing */
switch (cmd) {
case TW_IOCTL_FIRMWARE_PASS_THROUGH:
spin_lock_irqsave(tw_dev->host->host_lock, flags);
twa_get_request_id(tw_dev, &request_id);
/* Flag internal command */
tw_dev->srb[request_id] = NULL;
/* Flag chrdev ioctl */
tw_dev->chrdev_request_id = request_id;
full_command_packet = &tw_ioctl->firmware_command;
/* Load request id and sglist for both command types */
twa_load_sgl(tw_dev, full_command_packet, request_id, dma_handle, data_buffer_length_adjusted);
memcpy(tw_dev->command_packet_virt[request_id], &(tw_ioctl->firmware_command), sizeof(TW_Command_Full));
/* Now post the command packet to the controller */
twa_post_command_packet(tw_dev, request_id, 1);
spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
timeout = TW_IOCTL_CHRDEV_TIMEOUT*HZ;
/* Now wait for command to complete */
timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout);
/* We timed out, and didn't get an interrupt */
if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) {
/* Now we need to reset the board */
printk(KERN_WARNING "3w-9xxx: scsi%d: WARNING: (0x%02X:0x%04X): Character ioctl (0x%x) timed out, resetting card.\n",
tw_dev->host->host_no, TW_DRIVER, 0x37,
cmd);
retval = TW_IOCTL_ERROR_OS_EIO;
twa_reset_device_extension(tw_dev);
goto out3;
}
/* Now copy in the command packet response */
memcpy(&(tw_ioctl->firmware_command), tw_dev->command_packet_virt[request_id], sizeof(TW_Command_Full));
/* Now complete the io */
spin_lock_irqsave(tw_dev->host->host_lock, flags);
tw_dev->posted_request_count--;
tw_dev->state[request_id] = TW_S_COMPLETED;
twa_free_request_id(tw_dev, request_id);
spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
break;
case TW_IOCTL_GET_COMPATIBILITY_INFO:
tw_ioctl->driver_command.status = 0;
/* Copy compatibility struct into ioctl data buffer */
tw_compat_info = (TW_Compatibility_Info *)tw_ioctl->data_buffer;
memcpy(tw_compat_info, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info));
break;
case TW_IOCTL_GET_LAST_EVENT:
if (tw_dev->event_queue_wrapped) {
if (tw_dev->aen_clobber) {
tw_ioctl->driver_command.status = TW_IOCTL_ERROR_STATUS_AEN_CLOBBER;
tw_dev->aen_clobber = 0;
} else
tw_ioctl->driver_command.status = 0;
} else {
if (!tw_dev->error_index) {
tw_ioctl->driver_command.status = TW_IOCTL_ERROR_STATUS_NO_MORE_EVENTS;
break;
}
tw_ioctl->driver_command.status = 0;
}
event_index = (tw_dev->error_index - 1 + TW_Q_LENGTH) % TW_Q_LENGTH;
memcpy(tw_ioctl->data_buffer, tw_dev->event_queue[event_index], sizeof(TW_Event));
tw_dev->event_queue[event_index]->retrieved = TW_AEN_RETRIEVED;
break;
case TW_IOCTL_GET_FIRST_EVENT:
if (tw_dev->event_queue_wrapped) {
if (tw_dev->aen_clobber) {
tw_ioctl->driver_command.status = TW_IOCTL_ERROR_STATUS_AEN_CLOBBER;
tw_dev->aen_clobber = 0;
} else
tw_ioctl->driver_command.status = 0;
event_index = tw_dev->error_index;
} else {
if (!tw_dev->error_index) {
tw_ioctl->driver_command.status = TW_IOCTL_ERROR_STATUS_NO_MORE_EVENTS;
break;
}
tw_ioctl->driver_command.status = 0;
event_index = 0;
}
memcpy(tw_ioctl->data_buffer, tw_dev->event_queue[event_index], sizeof(TW_Event));
tw_dev->event_queue[event_index]->retrieved = TW_AEN_RETRIEVED;
break;
case TW_IOCTL_GET_NEXT_EVENT:
event = (TW_Event *)tw_ioctl->data_buffer;
sequence_id = event->sequence_id;
tw_ioctl->driver_command.status = 0;
if (tw_dev->event_queue_wrapped) {
if (tw_dev->aen_clobber) {
tw_ioctl->driver_command.status = TW_IOCTL_ERROR_STATUS_AEN_CLOBBER;
tw_dev->aen_clobber = 0;
}
start_index = tw_dev->error_index;
} else {
if (!tw_dev->error_index) {
tw_ioctl->driver_command.status = TW_IOCTL_ERROR_STATUS_NO_MORE_EVENTS;
break;
}
start_index = 0;
}
event_index = (start_index + sequence_id - tw_dev->event_queue[start_index]->sequence_id + 1) % TW_Q_LENGTH;
if (!(tw_dev->event_queue[event_index]->sequence_id > sequence_id)) {
if (tw_ioctl->driver_command.status == TW_IOCTL_ERROR_STATUS_AEN_CLOBBER)
tw_dev->aen_clobber = 1;
tw_ioctl->driver_command.status = TW_IOCTL_ERROR_STATUS_NO_MORE_EVENTS;
break;
}
memcpy(tw_ioctl->data_buffer, tw_dev->event_queue[event_index], sizeof(TW_Event));
tw_dev->event_queue[event_index]->retrieved = TW_AEN_RETRIEVED;
break;
case TW_IOCTL_GET_PREVIOUS_EVENT:
event = (TW_Event *)tw_ioctl->data_buffer;
sequence_id = event->sequence_id;
tw_ioctl->driver_command.status = 0;
if (tw_dev->event_queue_wrapped) {
if (tw_dev->aen_clobber) {
tw_ioctl->driver_command.status = TW_IOCTL_ERROR_STATUS_AEN_CLOBBER;
tw_dev->aen_clobber = 0;
}
start_index = tw_dev->error_index;
} else {
if (!tw_dev->error_index) {
tw_ioctl->driver_command.status = TW_IOCTL_ERROR_STATUS_NO_MORE_EVENTS;
break;
}
start_index = 0;
}
event_index = (start_index + sequence_id - tw_dev->event_queue[start_index]->sequence_id - 1) % TW_Q_LENGTH;
if (!(tw_dev->event_queue[event_index]->sequence_id < sequence_id)) {
if (tw_ioctl->driver_command.status == TW_IOCTL_ERROR_STATUS_AEN_CLOBBER)
tw_dev->aen_clobber = 1;
tw_ioctl->driver_command.status = TW_IOCTL_ERROR_STATUS_NO_MORE_EVENTS;
break;
}
memcpy(tw_ioctl->data_buffer, tw_dev->event_queue[event_index], sizeof(TW_Event));
tw_dev->event_queue[event_index]->retrieved = TW_AEN_RETRIEVED;
break;
case TW_IOCTL_GET_LOCK:
tw_lock = (TW_Lock *)tw_ioctl->data_buffer;
current_time = ktime_get();
if ((tw_lock->force_flag == 1) || (tw_dev->ioctl_sem_lock == 0) ||
ktime_after(current_time, tw_dev->ioctl_time)) {
tw_dev->ioctl_sem_lock = 1;
tw_dev->ioctl_time = ktime_add_ms(current_time, tw_lock->timeout_msec);
tw_ioctl->driver_command.status = 0;
tw_lock->time_remaining_msec = tw_lock->timeout_msec;
} else {
tw_ioctl->driver_command.status = TW_IOCTL_ERROR_STATUS_LOCKED;
tw_lock->time_remaining_msec = ktime_ms_delta(tw_dev->ioctl_time, current_time);
}
break;
case TW_IOCTL_RELEASE_LOCK:
if (tw_dev->ioctl_sem_lock == 1) {
tw_dev->ioctl_sem_lock = 0;
tw_ioctl->driver_command.status = 0;
} else {
tw_ioctl->driver_command.status = TW_IOCTL_ERROR_STATUS_NOT_LOCKED;
}
break;
default:
retval = TW_IOCTL_ERROR_OS_ENOTTY;
goto out3;
}
/* Now copy the entire response to userspace */
if (copy_to_user(argp, tw_ioctl, sizeof(TW_Ioctl_Buf_Apache) + driver_command.buffer_length - 1) == 0)
retval = 0;
out3:
/* Now free ioctl buf memory */
dma_free_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_Ioctl_Buf_Apache) - 1, cpu_addr, dma_handle);
out2:
mutex_unlock(&tw_dev->ioctl_lock);
out:
mutex_unlock(&twa_chrdev_mutex);
return retval;
} /* End twa_chrdev_ioctl() */
/* This function handles open for the character device */
/* NOTE that this function will race with remove. */
static int twa_chrdev_open(struct inode *inode, struct file *file)
{
unsigned int minor_number;
int retval = TW_IOCTL_ERROR_OS_ENODEV;
if (!capable(CAP_SYS_ADMIN)) {
retval = -EACCES;
goto out;
}
minor_number = iminor(inode);
if (minor_number >= twa_device_extension_count)
goto out;
retval = 0;
out:
return retval;
} /* End twa_chrdev_open() */
/* This function will print readable messages from status register errors */
static int twa_decode_bits(TW_Device_Extension *tw_dev, u32 status_reg_value)
{
int retval = 1;
/* Check for various error conditions and handle them appropriately */
if (status_reg_value & TW_STATUS_PCI_PARITY_ERROR) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xc, "PCI Parity Error: clearing");
writel(TW_CONTROL_CLEAR_PARITY_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
}
if (status_reg_value & TW_STATUS_PCI_ABORT) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xd, "PCI Abort: clearing");
writel(TW_CONTROL_CLEAR_PCI_ABORT, TW_CONTROL_REG_ADDR(tw_dev));
pci_write_config_word(tw_dev->tw_pci_dev, PCI_STATUS, TW_PCI_CLEAR_PCI_ABORT);
}
if (status_reg_value & TW_STATUS_QUEUE_ERROR) {
if (((tw_dev->tw_pci_dev->device != PCI_DEVICE_ID_3WARE_9650SE) &&
(tw_dev->tw_pci_dev->device != PCI_DEVICE_ID_3WARE_9690SA)) ||
(!test_bit(TW_IN_RESET, &tw_dev->flags)))
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Controller Queue Error: clearing");
writel(TW_CONTROL_CLEAR_QUEUE_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
}
if (status_reg_value & TW_STATUS_MICROCONTROLLER_ERROR) {
if (tw_dev->reset_print == 0) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x10, "Microcontroller Error: clearing");
tw_dev->reset_print = 1;
}
goto out;
}
retval = 0;
out:
return retval;
} /* End twa_decode_bits() */
/* This function will empty the response queue */
static int twa_empty_response_queue(TW_Device_Extension *tw_dev)
{
u32 status_reg_value, response_que_value;
int count = 0, retval = 1;
status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev));
while (((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) && (count < TW_MAX_RESPONSE_DRAIN)) {
response_que_value = readl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev));
count++;
}
if (count == TW_MAX_RESPONSE_DRAIN)
goto out;
retval = 0;
out:
return retval;
} /* End twa_empty_response_queue() */
/* This function will clear the pchip/response queue on 9550SX */
static int twa_empty_response_queue_large(TW_Device_Extension *tw_dev)
{
u32 response_que_value = 0;
unsigned long before;
int retval = 1;
if (tw_dev->tw_pci_dev->device != PCI_DEVICE_ID_3WARE_9000) {
before = jiffies;
while ((response_que_value & TW_9550SX_DRAIN_COMPLETED) != TW_9550SX_DRAIN_COMPLETED) {
response_que_value = readl(TW_RESPONSE_QUEUE_REG_ADDR_LARGE(tw_dev));
msleep(1);
if (time_after(jiffies, before + HZ * 30))
goto out;
}
/* P-chip settle time */
msleep(500);
retval = 0;
} else
retval = 0;
out:
return retval;
} /* End twa_empty_response_queue_large() */
/* This function passes sense keys from firmware to scsi layer */
static int twa_fill_sense(TW_Device_Extension *tw_dev, int request_id, int copy_sense, int print_host)
{
TW_Command_Full *full_command_packet;
unsigned short error;
int retval = 1;
char *error_str;
full_command_packet = tw_dev->command_packet_virt[request_id];
/* Check for embedded error string */
error_str = &(full_command_packet->header.err_specific_desc[strlen(full_command_packet->header.err_specific_desc) + 1]);
/* Don't print error for Logical unit not supported during rollcall */
error = le16_to_cpu(full_command_packet->header.status_block.error);
if ((error != TW_ERROR_LOGICAL_UNIT_NOT_SUPPORTED) && (error != TW_ERROR_UNIT_OFFLINE)) {
if (print_host)
printk(KERN_WARNING "3w-9xxx: scsi%d: ERROR: (0x%02X:0x%04X): %s:%s.\n",
tw_dev->host->host_no,
TW_MESSAGE_SOURCE_CONTROLLER_ERROR,
full_command_packet->header.status_block.error,
error_str[0] == '\0' ?
twa_string_lookup(twa_error_table,
full_command_packet->header.status_block.error) : error_str,
full_command_packet->header.err_specific_desc);
else
printk(KERN_WARNING "3w-9xxx: ERROR: (0x%02X:0x%04X): %s:%s.\n",
TW_MESSAGE_SOURCE_CONTROLLER_ERROR,
full_command_packet->header.status_block.error,
error_str[0] == '\0' ?
twa_string_lookup(twa_error_table,
full_command_packet->header.status_block.error) : error_str,
full_command_packet->header.err_specific_desc);
}
if (copy_sense) {
memcpy(tw_dev->srb[request_id]->sense_buffer, full_command_packet->header.sense_data, TW_SENSE_DATA_LENGTH);
tw_dev->srb[request_id]->result = (full_command_packet->command.newcommand.status << 1);
retval = TW_ISR_DONT_RESULT;
goto out;
}
retval = 0;
out:
return retval;
} /* End twa_fill_sense() */
/* This function will free up device extension resources */
static void twa_free_device_extension(TW_Device_Extension *tw_dev)
{
if (tw_dev->command_packet_virt[0])
dma_free_coherent(&tw_dev->tw_pci_dev->dev,
sizeof(TW_Command_Full) * TW_Q_LENGTH,
tw_dev->command_packet_virt[0],
tw_dev->command_packet_phys[0]);
if (tw_dev->generic_buffer_virt[0])
dma_free_coherent(&tw_dev->tw_pci_dev->dev,
TW_SECTOR_SIZE * TW_Q_LENGTH,
tw_dev->generic_buffer_virt[0],
tw_dev->generic_buffer_phys[0]);
kfree(tw_dev->event_queue[0]);
} /* End twa_free_device_extension() */
/* This function will free a request id */
static void twa_free_request_id(TW_Device_Extension *tw_dev, int request_id)
{
tw_dev->free_queue[tw_dev->free_tail] = request_id;
tw_dev->state[request_id] = TW_S_FINISHED;
tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH;
} /* End twa_free_request_id() */
/* This function will get parameter table entries from the firmware */
static void *twa_get_param(TW_Device_Extension *tw_dev, int request_id, int table_id, int parameter_id, int parameter_size_bytes)
{
TW_Command_Full *full_command_packet;
TW_Command *command_packet;
TW_Param_Apache *param;
void *retval = NULL;
/* Setup the command packet */
full_command_packet = tw_dev->command_packet_virt[request_id];
memset(full_command_packet, 0, sizeof(TW_Command_Full));
command_packet = &full_command_packet->command.oldcommand;
command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
command_packet->size = TW_COMMAND_SIZE;
command_packet->request_id = request_id;
command_packet->byte6_offset.block_count = cpu_to_le16(1);
/* Now setup the param */
param = (TW_Param_Apache *)tw_dev->generic_buffer_virt[request_id];
memset(param, 0, TW_SECTOR_SIZE);
param->table_id = cpu_to_le16(table_id | 0x8000);
param->parameter_id = cpu_to_le16(parameter_id);
param->parameter_size_bytes = cpu_to_le16(parameter_size_bytes);
command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]);
command_packet->byte8_offset.param.sgl[0].length = cpu_to_le32(TW_SECTOR_SIZE);
/* Post the command packet to the board */
twa_post_command_packet(tw_dev, request_id, 1);
/* Poll for completion */
if (twa_poll_response(tw_dev, request_id, 30))
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x13, "No valid response during get param")
else
retval = (void *)&(param->data[0]);
tw_dev->posted_request_count--;
tw_dev->state[request_id] = TW_S_INITIAL;
return retval;
} /* End twa_get_param() */
/* This function will assign an available request id */
static void twa_get_request_id(TW_Device_Extension *tw_dev, int *request_id)
{
*request_id = tw_dev->free_queue[tw_dev->free_head];
tw_dev->free_head = (tw_dev->free_head + 1) % TW_Q_LENGTH;
tw_dev->state[*request_id] = TW_S_STARTED;
} /* End twa_get_request_id() */
/* This function will send an initconnection command to controller */
static int twa_initconnection(TW_Device_Extension *tw_dev, int message_credits,
u32 set_features, unsigned short current_fw_srl,
unsigned short current_fw_arch_id,
unsigned short current_fw_branch,
unsigned short current_fw_build,
unsigned short *fw_on_ctlr_srl,
unsigned short *fw_on_ctlr_arch_id,
unsigned short *fw_on_ctlr_branch,
unsigned short *fw_on_ctlr_build,
u32 *init_connect_result)
{
TW_Command_Full *full_command_packet;
TW_Initconnect *tw_initconnect;
int request_id = 0, retval = 1;
/* Initialize InitConnection command packet */
full_command_packet = tw_dev->command_packet_virt[request_id];
memset(full_command_packet, 0, sizeof(TW_Command_Full));
full_command_packet->header.header_desc.size_header = 128;
tw_initconnect = (TW_Initconnect *)&full_command_packet->command.oldcommand;
tw_initconnect->opcode__reserved = TW_OPRES_IN(0, TW_OP_INIT_CONNECTION);
tw_initconnect->request_id = request_id;
tw_initconnect->message_credits = cpu_to_le16(message_credits);
tw_initconnect->features = set_features;
/* Turn on 64-bit sgl support if we need to */
tw_initconnect->features |= sizeof(dma_addr_t) > 4 ? 1 : 0;
tw_initconnect->features = cpu_to_le32(tw_initconnect->features);
if (set_features & TW_EXTENDED_INIT_CONNECT) {
tw_initconnect->size = TW_INIT_COMMAND_PACKET_SIZE_EXTENDED;
tw_initconnect->fw_srl = cpu_to_le16(current_fw_srl);
tw_initconnect->fw_arch_id = cpu_to_le16(current_fw_arch_id);
tw_initconnect->fw_branch = cpu_to_le16(current_fw_branch);
tw_initconnect->fw_build = cpu_to_le16(current_fw_build);
} else
tw_initconnect->size = TW_INIT_COMMAND_PACKET_SIZE;
/* Send command packet to the board */
twa_post_command_packet(tw_dev, request_id, 1);
/* Poll for completion */
if (twa_poll_response(tw_dev, request_id, 30)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x15, "No valid response during init connection");
} else {
if (set_features & TW_EXTENDED_INIT_CONNECT) {
*fw_on_ctlr_srl = le16_to_cpu(tw_initconnect->fw_srl);
*fw_on_ctlr_arch_id = le16_to_cpu(tw_initconnect->fw_arch_id);
*fw_on_ctlr_branch = le16_to_cpu(tw_initconnect->fw_branch);
*fw_on_ctlr_build = le16_to_cpu(tw_initconnect->fw_build);
*init_connect_result = le32_to_cpu(tw_initconnect->result);
}
retval = 0;
}
tw_dev->posted_request_count--;
tw_dev->state[request_id] = TW_S_INITIAL;
return retval;
} /* End twa_initconnection() */
/* This function will initialize the fields of a device extension */
static int twa_initialize_device_extension(TW_Device_Extension *tw_dev)
{
int i, retval = 1;
/* Initialize command packet buffers */
if (twa_allocate_memory(tw_dev, sizeof(TW_Command_Full), 0)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x16, "Command packet memory allocation failed");
goto out;
}
/* Initialize generic buffer */
if (twa_allocate_memory(tw_dev, TW_SECTOR_SIZE, 1)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x17, "Generic memory allocation failed");
goto out;
}
/* Allocate event info space */
2007-07-19 08:49:03 +00:00
tw_dev->event_queue[0] = kcalloc(TW_Q_LENGTH, sizeof(TW_Event), GFP_KERNEL);
if (!tw_dev->event_queue[0]) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x18, "Event info memory allocation failed");
goto out;
}
for (i = 0; i < TW_Q_LENGTH; i++) {
tw_dev->event_queue[i] = (TW_Event *)((unsigned char *)tw_dev->event_queue[0] + (i * sizeof(TW_Event)));
tw_dev->free_queue[i] = i;
tw_dev->state[i] = TW_S_INITIAL;
}
tw_dev->pending_head = TW_Q_START;
tw_dev->pending_tail = TW_Q_START;
tw_dev->free_head = TW_Q_START;
tw_dev->free_tail = TW_Q_START;
tw_dev->error_sequence_id = 1;
tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
mutex_init(&tw_dev->ioctl_lock);
init_waitqueue_head(&tw_dev->ioctl_wqueue);
retval = 0;
out:
return retval;
} /* End twa_initialize_device_extension() */
/* This function is the interrupt service routine */
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
static irqreturn_t twa_interrupt(int irq, void *dev_instance)
{
int request_id, error = 0;
u32 status_reg_value;
TW_Response_Queue response_que;
TW_Command_Full *full_command_packet;
TW_Device_Extension *tw_dev = (TW_Device_Extension *)dev_instance;
int handled = 0;
/* Get the per adapter lock */
spin_lock(tw_dev->host->host_lock);
/* Read the registers */
status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev));
/* Check if this is our interrupt, otherwise bail */
if (!(status_reg_value & TW_STATUS_VALID_INTERRUPT))
goto twa_interrupt_bail;
handled = 1;
/* If we are resetting, bail */
if (test_bit(TW_IN_RESET, &tw_dev->flags))
goto twa_interrupt_bail;
/* Check controller for errors */
if (twa_check_bits(status_reg_value)) {
if (twa_decode_bits(tw_dev, status_reg_value)) {
TW_CLEAR_ALL_INTERRUPTS(tw_dev);
goto twa_interrupt_bail;
}
}
/* Handle host interrupt */
if (status_reg_value & TW_STATUS_HOST_INTERRUPT)
TW_CLEAR_HOST_INTERRUPT(tw_dev);
/* Handle attention interrupt */
if (status_reg_value & TW_STATUS_ATTENTION_INTERRUPT) {
TW_CLEAR_ATTENTION_INTERRUPT(tw_dev);
if (!(test_and_set_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags))) {
twa_get_request_id(tw_dev, &request_id);
error = twa_aen_read_queue(tw_dev, request_id);
if (error) {
tw_dev->state[request_id] = TW_S_COMPLETED;
twa_free_request_id(tw_dev, request_id);
clear_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags);
}
}
}
/* Handle command interrupt */
if (status_reg_value & TW_STATUS_COMMAND_INTERRUPT) {
TW_MASK_COMMAND_INTERRUPT(tw_dev);
/* Drain as many pending commands as we can */
while (tw_dev->pending_request_count > 0) {
request_id = tw_dev->pending_queue[tw_dev->pending_head];
if (tw_dev->state[request_id] != TW_S_PENDING) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x19, "Found request id that wasn't pending");
TW_CLEAR_ALL_INTERRUPTS(tw_dev);
goto twa_interrupt_bail;
}
if (twa_post_command_packet(tw_dev, request_id, 1)==0) {
tw_dev->pending_head = (tw_dev->pending_head + 1) % TW_Q_LENGTH;
tw_dev->pending_request_count--;
} else {
/* If we get here, we will continue re-posting on the next command interrupt */
break;
}
}
}
/* Handle response interrupt */
if (status_reg_value & TW_STATUS_RESPONSE_INTERRUPT) {
/* Drain the response queue from the board */
while ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) {
/* Complete the response */
response_que.value = readl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
request_id = TW_RESID_OUT(response_que.response_id);
full_command_packet = tw_dev->command_packet_virt[request_id];
error = 0;
/* Check for command packet errors */
if (full_command_packet->command.newcommand.status != 0) {
if (tw_dev->srb[request_id] != NULL) {
error = twa_fill_sense(tw_dev, request_id, 1, 1);
} else {
/* Skip ioctl error prints */
if (request_id != tw_dev->chrdev_request_id) {
error = twa_fill_sense(tw_dev, request_id, 0, 1);
}
}
}
/* Check for correct state */
if (tw_dev->state[request_id] != TW_S_POSTED) {
if (tw_dev->srb[request_id] != NULL) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Received a request id that wasn't posted");
TW_CLEAR_ALL_INTERRUPTS(tw_dev);
goto twa_interrupt_bail;
}
}
/* Check for internal command completion */
if (tw_dev->srb[request_id] == NULL) {
if (request_id != tw_dev->chrdev_request_id) {
if (twa_aen_complete(tw_dev, request_id))
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Error completing AEN during attention interrupt");
} else {
tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
wake_up(&tw_dev->ioctl_wqueue);
}
} else {
struct scsi_cmnd *cmd;
cmd = tw_dev->srb[request_id];
twa_scsiop_execute_scsi_complete(tw_dev, request_id);
/* If no error command was a success */
if (error == 0) {
cmd->result = (DID_OK << 16);
}
/* If error, command failed */
if (error == 1) {
/* Ask for a host reset */
cmd->result = (DID_OK << 16) | (CHECK_CONDITION << 1);
}
/* Report residual bytes for single sgl */
if ((scsi_sg_count(cmd) <= 1) && (full_command_packet->command.newcommand.status == 0)) {
if (full_command_packet->command.newcommand.sg_list[0].length < scsi_bufflen(tw_dev->srb[request_id]))
scsi_set_resid(cmd, scsi_bufflen(cmd) - full_command_packet->command.newcommand.sg_list[0].length);
}
/* Now complete the io */
if (twa_command_mapped(cmd))
scsi_dma_unmap(cmd);
cmd->scsi_done(cmd);
tw_dev->state[request_id] = TW_S_COMPLETED;
twa_free_request_id(tw_dev, request_id);
tw_dev->posted_request_count--;
}
/* Check for valid status after each drain */
status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev));
if (twa_check_bits(status_reg_value)) {
if (twa_decode_bits(tw_dev, status_reg_value)) {
TW_CLEAR_ALL_INTERRUPTS(tw_dev);
goto twa_interrupt_bail;
}
}
}
}
twa_interrupt_bail:
spin_unlock(tw_dev->host->host_lock);
return IRQ_RETVAL(handled);
} /* End twa_interrupt() */
/* This function will load the request id and various sgls for ioctls */
static void twa_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full *full_command_packet, int request_id, dma_addr_t dma_handle, int length)
{
TW_Command *oldcommand;
TW_Command_Apache *newcommand;
TW_SG_Entry *sgl;
unsigned int pae = 0;
if ((sizeof(long) < 8) && (sizeof(dma_addr_t) > 4))
pae = 1;
if (TW_OP_OUT(full_command_packet->command.newcommand.opcode__reserved) == TW_OP_EXECUTE_SCSI) {
newcommand = &full_command_packet->command.newcommand;
newcommand->request_id__lunl =
cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id));
if (length) {
newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1);
newcommand->sg_list[0].length = cpu_to_le32(length);
}
newcommand->sgl_entries__lunh =
cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->sgl_entries__lunh), length ? 1 : 0));
} else {
oldcommand = &full_command_packet->command.oldcommand;
oldcommand->request_id = request_id;
if (TW_SGL_OUT(oldcommand->opcode__sgloffset)) {
/* Load the sg list */
if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9690SA)
sgl = (TW_SG_Entry *)((u32 *)oldcommand+oldcommand->size - (sizeof(TW_SG_Entry)/4) + pae);
else
sgl = (TW_SG_Entry *)((u32 *)oldcommand+TW_SGL_OUT(oldcommand->opcode__sgloffset));
sgl->address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1);
sgl->length = cpu_to_le32(length);
oldcommand->size += pae;
}
}
} /* End twa_load_sgl() */
/* This function will poll for a response interrupt of a request */
static int twa_poll_response(TW_Device_Extension *tw_dev, int request_id, int seconds)
{
int retval = 1, found = 0, response_request_id;
TW_Response_Queue response_queue;
TW_Command_Full *full_command_packet = tw_dev->command_packet_virt[request_id];
if (twa_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, seconds) == 0) {
response_queue.value = readl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
response_request_id = TW_RESID_OUT(response_queue.response_id);
if (request_id != response_request_id) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1e, "Found unexpected request id while polling for response");
goto out;
}
if (TW_OP_OUT(full_command_packet->command.newcommand.opcode__reserved) == TW_OP_EXECUTE_SCSI) {
if (full_command_packet->command.newcommand.status != 0) {
/* bad response */
twa_fill_sense(tw_dev, request_id, 0, 0);
goto out;
}
found = 1;
} else {
if (full_command_packet->command.oldcommand.status != 0) {
/* bad response */
twa_fill_sense(tw_dev, request_id, 0, 0);
goto out;
}
found = 1;
}
}
if (found)
retval = 0;
out:
return retval;
} /* End twa_poll_response() */
/* This function will poll the status register for a flag */
static int twa_poll_status(TW_Device_Extension *tw_dev, u32 flag, int seconds)
{
u32 status_reg_value;
unsigned long before;
int retval = 1;
status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev));
before = jiffies;
if (twa_check_bits(status_reg_value))
twa_decode_bits(tw_dev, status_reg_value);
while ((status_reg_value & flag) != flag) {
status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev));
if (twa_check_bits(status_reg_value))
twa_decode_bits(tw_dev, status_reg_value);
if (time_after(jiffies, before + HZ * seconds))
goto out;
msleep(50);
}
retval = 0;
out:
return retval;
} /* End twa_poll_status() */
/* This function will poll the status register for disappearance of a flag */
static int twa_poll_status_gone(TW_Device_Extension *tw_dev, u32 flag, int seconds)
{
u32 status_reg_value;
unsigned long before;
int retval = 1;
status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev));
before = jiffies;
if (twa_check_bits(status_reg_value))
twa_decode_bits(tw_dev, status_reg_value);
while ((status_reg_value & flag) != 0) {
status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev));
if (twa_check_bits(status_reg_value))
twa_decode_bits(tw_dev, status_reg_value);
if (time_after(jiffies, before + HZ * seconds))
goto out;
msleep(50);
}
retval = 0;
out:
return retval;
} /* End twa_poll_status_gone() */
/* This function will attempt to post a command packet to the board */
static int twa_post_command_packet(TW_Device_Extension *tw_dev, int request_id, char internal)
{
u32 status_reg_value;
dma_addr_t command_que_value;
int retval = 1;
command_que_value = tw_dev->command_packet_phys[request_id];
/* For 9650SE write low 4 bytes first */
if ((tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE) ||
(tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9690SA)) {
command_que_value += TW_COMMAND_OFFSET;
writel((u32)command_que_value, TW_COMMAND_QUEUE_REG_ADDR_LARGE(tw_dev));
}
status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev));
if (twa_check_bits(status_reg_value))
twa_decode_bits(tw_dev, status_reg_value);
if (((tw_dev->pending_request_count > 0) && (tw_dev->state[request_id] != TW_S_PENDING)) || (status_reg_value & TW_STATUS_COMMAND_QUEUE_FULL)) {
/* Only pend internal driver commands */
if (!internal) {
retval = SCSI_MLQUEUE_HOST_BUSY;
goto out;
}
/* Couldn't post the command packet, so we do it later */
if (tw_dev->state[request_id] != TW_S_PENDING) {
tw_dev->state[request_id] = TW_S_PENDING;
tw_dev->pending_request_count++;
if (tw_dev->pending_request_count > tw_dev->max_pending_request_count) {
tw_dev->max_pending_request_count = tw_dev->pending_request_count;
}
tw_dev->pending_queue[tw_dev->pending_tail] = request_id;
tw_dev->pending_tail = (tw_dev->pending_tail + 1) % TW_Q_LENGTH;
}
TW_UNMASK_COMMAND_INTERRUPT(tw_dev);
goto out;
} else {
if ((tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE) ||
(tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9690SA)) {
/* Now write upper 4 bytes */
writel((u32)((u64)command_que_value >> 32), TW_COMMAND_QUEUE_REG_ADDR_LARGE(tw_dev) + 0x4);
} else {
if (sizeof(dma_addr_t) > 4) {
command_que_value += TW_COMMAND_OFFSET;
writel((u32)command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
writel((u32)((u64)command_que_value >> 32), TW_COMMAND_QUEUE_REG_ADDR(tw_dev) + 0x4);
} else {
writel(TW_COMMAND_OFFSET + command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
}
}
tw_dev->state[request_id] = TW_S_POSTED;
tw_dev->posted_request_count++;
if (tw_dev->posted_request_count > tw_dev->max_posted_request_count) {
tw_dev->max_posted_request_count = tw_dev->posted_request_count;
}
}
retval = 0;
out:
return retval;
} /* End twa_post_command_packet() */
/* This function will reset a device extension */
static int twa_reset_device_extension(TW_Device_Extension *tw_dev)
{
int i = 0;
int retval = 1;
unsigned long flags = 0;
set_bit(TW_IN_RESET, &tw_dev->flags);
TW_DISABLE_INTERRUPTS(tw_dev);
TW_MASK_COMMAND_INTERRUPT(tw_dev);
spin_lock_irqsave(tw_dev->host->host_lock, flags);
/* Abort all requests that are in progress */
for (i = 0; i < TW_Q_LENGTH; i++) {
if ((tw_dev->state[i] != TW_S_FINISHED) &&
(tw_dev->state[i] != TW_S_INITIAL) &&
(tw_dev->state[i] != TW_S_COMPLETED)) {
if (tw_dev->srb[i]) {
struct scsi_cmnd *cmd = tw_dev->srb[i];
cmd->result = (DID_RESET << 16);
if (twa_command_mapped(cmd))
scsi_dma_unmap(cmd);
cmd->scsi_done(cmd);
}
}
}
/* Reset queues and counts */
for (i = 0; i < TW_Q_LENGTH; i++) {
tw_dev->free_queue[i] = i;
tw_dev->state[i] = TW_S_INITIAL;
}
tw_dev->free_head = TW_Q_START;
tw_dev->free_tail = TW_Q_START;
tw_dev->posted_request_count = 0;
tw_dev->pending_request_count = 0;
tw_dev->pending_head = TW_Q_START;
tw_dev->pending_tail = TW_Q_START;
tw_dev->reset_print = 0;
spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
if (twa_reset_sequence(tw_dev, 1))
goto out;
TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
clear_bit(TW_IN_RESET, &tw_dev->flags);
tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
retval = 0;
out:
return retval;
} /* End twa_reset_device_extension() */
/* This function will reset a controller */
static int twa_reset_sequence(TW_Device_Extension *tw_dev, int soft_reset)
{
int tries = 0, retval = 1, flashed = 0, do_soft_reset = soft_reset;
while (tries < TW_MAX_RESET_TRIES) {
if (do_soft_reset) {
TW_SOFT_RESET(tw_dev);
/* Clear pchip/response queue on 9550SX */
if (twa_empty_response_queue_large(tw_dev)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x36, "Response queue (large) empty failed during reset sequence");
do_soft_reset = 1;
tries++;
continue;
}
}
/* Make sure controller is in a good state */
if (twa_poll_status(tw_dev, TW_STATUS_MICROCONTROLLER_READY | (do_soft_reset == 1 ? TW_STATUS_ATTENTION_INTERRUPT : 0), 60)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1f, "Microcontroller not ready during reset sequence");
do_soft_reset = 1;
tries++;
continue;
}
/* Empty response queue */
if (twa_empty_response_queue(tw_dev)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x20, "Response queue empty failed during reset sequence");
do_soft_reset = 1;
tries++;
continue;
}
flashed = 0;
/* Check for compatibility/flash */
if (twa_check_srl(tw_dev, &flashed)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x21, "Compatibility check failed during reset sequence");
do_soft_reset = 1;
tries++;
continue;
} else {
if (flashed) {
tries++;
continue;
}
}
/* Drain the AEN queue */
if (twa_aen_drain_queue(tw_dev, soft_reset)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x22, "AEN drain failed during reset sequence");
do_soft_reset = 1;
tries++;
continue;
}
/* If we got here, controller is in a good state */
retval = 0;
goto out;
}
out:
return retval;
} /* End twa_reset_sequence() */
/* This funciton returns unit geometry in cylinders/heads/sectors */
static int twa_scsi_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[])
{
int heads, sectors, cylinders;
TW_Device_Extension *tw_dev;
tw_dev = (TW_Device_Extension *)sdev->host->hostdata;
if (capacity >= 0x200000) {
heads = 255;
sectors = 63;
cylinders = sector_div(capacity, heads * sectors);
} else {
heads = 64;
sectors = 32;
cylinders = sector_div(capacity, heads * sectors);
}
geom[0] = heads;
geom[1] = sectors;
geom[2] = cylinders;
return 0;
} /* End twa_scsi_biosparam() */
/* This is the new scsi eh reset function */
static int twa_scsi_eh_reset(struct scsi_cmnd *SCpnt)
{
TW_Device_Extension *tw_dev = NULL;
int retval = FAILED;
tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
tw_dev->num_resets++;
sdev_printk(KERN_WARNING, SCpnt->device,
"WARNING: (0x%02X:0x%04X): Command (0x%x) timed out, resetting card.\n",
TW_DRIVER, 0x2c, SCpnt->cmnd[0]);
/* Make sure we are not issuing an ioctl or resetting from ioctl */
mutex_lock(&tw_dev->ioctl_lock);
/* Now reset the card and some of the device extension data */
if (twa_reset_device_extension(tw_dev)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2b, "Controller reset failed during scsi host reset");
goto out;
}
retval = SUCCESS;
out:
mutex_unlock(&tw_dev->ioctl_lock);
return retval;
} /* End twa_scsi_eh_reset() */
/* This is the main scsi queue function to handle scsi opcodes */
static int twa_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
{
int request_id, retval;
TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
/* If we are resetting due to timed out ioctl, report as busy */
if (test_bit(TW_IN_RESET, &tw_dev->flags)) {
retval = SCSI_MLQUEUE_HOST_BUSY;
goto out;
}
/* Check if this FW supports luns */
if ((SCpnt->device->lun != 0) && (tw_dev->tw_compat_info.working_srl < TW_FW_SRL_LUNS_SUPPORTED)) {
SCpnt->result = (DID_BAD_TARGET << 16);
done(SCpnt);
retval = 0;
goto out;
}
/* Save done function into scsi_cmnd struct */
SCpnt->scsi_done = done;
/* Get a free request id */
twa_get_request_id(tw_dev, &request_id);
/* Save the scsi command for use by the ISR */
tw_dev->srb[request_id] = SCpnt;
retval = twa_scsiop_execute_scsi(tw_dev, request_id, NULL, 0, NULL);
switch (retval) {
case SCSI_MLQUEUE_HOST_BUSY:
if (twa_command_mapped(SCpnt))
scsi_dma_unmap(SCpnt);
twa_free_request_id(tw_dev, request_id);
break;
case 1:
SCpnt->result = (DID_ERROR << 16);
if (twa_command_mapped(SCpnt))
scsi_dma_unmap(SCpnt);
done(SCpnt);
tw_dev->state[request_id] = TW_S_COMPLETED;
twa_free_request_id(tw_dev, request_id);
retval = 0;
}
out:
return retval;
} /* End twa_scsi_queue() */
static DEF_SCSI_QCMD(twa_scsi_queue)
/* This function hands scsi cdb's to the firmware */
static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
unsigned char *cdb, int use_sg,
TW_SG_Entry *sglistarg)
{
TW_Command_Full *full_command_packet;
TW_Command_Apache *command_packet;
u32 num_sectors = 0x0;
int i, sg_count;
struct scsi_cmnd *srb = NULL;
struct scatterlist *sglist = NULL, *sg;
int retval = 1;
if (tw_dev->srb[request_id]) {
srb = tw_dev->srb[request_id];
if (scsi_sglist(srb))
sglist = scsi_sglist(srb);
}
/* Initialize command packet */
full_command_packet = tw_dev->command_packet_virt[request_id];
full_command_packet->header.header_desc.size_header = 128;
full_command_packet->header.status_block.error = 0;
full_command_packet->header.status_block.severity__reserved = 0;
command_packet = &full_command_packet->command.newcommand;
command_packet->status = 0;
command_packet->opcode__reserved = TW_OPRES_IN(0, TW_OP_EXECUTE_SCSI);
/* We forced 16 byte cdb use earlier */
if (!cdb)
memcpy(command_packet->cdb, srb->cmnd, TW_MAX_CDB_LEN);
else
memcpy(command_packet->cdb, cdb, TW_MAX_CDB_LEN);
if (srb) {
command_packet->unit = srb->device->id;
command_packet->request_id__lunl =
cpu_to_le16(TW_REQ_LUN_IN(srb->device->lun, request_id));
} else {
command_packet->request_id__lunl =
cpu_to_le16(TW_REQ_LUN_IN(0, request_id));
command_packet->unit = 0;
}
command_packet->sgl_offset = 16;
if (!sglistarg) {
/* Map sglist from scsi layer to cmd packet */
if (scsi_sg_count(srb)) {
if (!twa_command_mapped(srb)) {
if (srb->sc_data_direction == DMA_TO_DEVICE ||
srb->sc_data_direction == DMA_BIDIRECTIONAL)
scsi_sg_copy_to_buffer(srb,
tw_dev->generic_buffer_virt[request_id],
TW_SECTOR_SIZE);
command_packet->sg_list[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]);
command_packet->sg_list[0].length = cpu_to_le32(TW_MIN_SGL_LENGTH);
} else {
sg_count = scsi_dma_map(srb);
if (sg_count < 0)
goto out;
scsi_for_each_sg(srb, sg, sg_count, i) {
command_packet->sg_list[i].address = TW_CPU_TO_SGL(sg_dma_address(sg));
command_packet->sg_list[i].length = cpu_to_le32(sg_dma_len(sg));
if (command_packet->sg_list[i].address & TW_CPU_TO_SGL(TW_ALIGNMENT_9000_SGL)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2e, "Found unaligned sgl address during execute scsi");
goto out;
}
}
}
command_packet->sgl_entries__lunh = cpu_to_le16(TW_REQ_LUN_IN((srb->device->lun >> 4), scsi_sg_count(tw_dev->srb[request_id])));
}
} else {
/* Internal cdb post */
for (i = 0; i < use_sg; i++) {
command_packet->sg_list[i].address = TW_CPU_TO_SGL(sglistarg[i].address);
command_packet->sg_list[i].length = cpu_to_le32(sglistarg[i].length);
if (command_packet->sg_list[i].address & TW_CPU_TO_SGL(TW_ALIGNMENT_9000_SGL)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2f, "Found unaligned sgl address during internal post");
goto out;
}
}
command_packet->sgl_entries__lunh = cpu_to_le16(TW_REQ_LUN_IN(0, use_sg));
}
if (srb) {
if (srb->cmnd[0] == READ_6 || srb->cmnd[0] == WRITE_6)
num_sectors = (u32)srb->cmnd[4];
if (srb->cmnd[0] == READ_10 || srb->cmnd[0] == WRITE_10)
num_sectors = (u32)srb->cmnd[8] | ((u32)srb->cmnd[7] << 8);
}
/* Update sector statistic */
tw_dev->sector_count = num_sectors;
if (tw_dev->sector_count > tw_dev->max_sector_count)
tw_dev->max_sector_count = tw_dev->sector_count;
/* Update SG statistics */
if (srb) {
tw_dev->sgl_entries = scsi_sg_count(tw_dev->srb[request_id]);
if (tw_dev->sgl_entries > tw_dev->max_sgl_entries)
tw_dev->max_sgl_entries = tw_dev->sgl_entries;
}
/* Now post the command to the board */
if (srb) {
retval = twa_post_command_packet(tw_dev, request_id, 0);
} else {
twa_post_command_packet(tw_dev, request_id, 1);
retval = 0;
}
out:
return retval;
} /* End twa_scsiop_execute_scsi() */
/* This function completes an execute scsi operation */
static void twa_scsiop_execute_scsi_complete(TW_Device_Extension *tw_dev, int request_id)
{
struct scsi_cmnd *cmd = tw_dev->srb[request_id];
if (!twa_command_mapped(cmd) &&
(cmd->sc_data_direction == DMA_FROM_DEVICE ||
cmd->sc_data_direction == DMA_BIDIRECTIONAL)) {
if (scsi_sg_count(cmd) == 1) {
void *buf = tw_dev->generic_buffer_virt[request_id];
scsi_sg_copy_from_buffer(cmd, buf, TW_SECTOR_SIZE);
}
}
} /* End twa_scsiop_execute_scsi_complete() */
/* This function tells the controller to shut down */
static void __twa_shutdown(TW_Device_Extension *tw_dev)
{
/* Disable interrupts */
TW_DISABLE_INTERRUPTS(tw_dev);
/* Free up the IRQ */
free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
printk(KERN_WARNING "3w-9xxx: Shutting down host %d.\n", tw_dev->host->host_no);
/* Tell the card we are shutting down */
if (twa_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x31, "Connection shutdown failed");
} else {
printk(KERN_WARNING "3w-9xxx: Shutdown complete.\n");
}
/* Clear all interrupts just before exit */
TW_CLEAR_ALL_INTERRUPTS(tw_dev);
} /* End __twa_shutdown() */
/* Wrapper for __twa_shutdown */
static void twa_shutdown(struct pci_dev *pdev)
{
struct Scsi_Host *host = pci_get_drvdata(pdev);
TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
__twa_shutdown(tw_dev);
} /* End twa_shutdown() */
/* This function will look up a string */
static char *twa_string_lookup(twa_message_type *table, unsigned int code)
{
int index;
for (index = 0; ((code != table[index].code) &&
(table[index].text != (char *)0)); index++);
return(table[index].text);
} /* End twa_string_lookup() */
/* This function gets called when a disk is coming on-line */
static int twa_slave_configure(struct scsi_device *sdev)
{
/* Force 60 second timeout */
blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
return 0;
} /* End twa_slave_configure() */
/* scsi_host_template initializer */
static struct scsi_host_template driver_template = {
.module = THIS_MODULE,
.name = "3ware 9000 Storage Controller",
.queuecommand = twa_scsi_queue,
.eh_host_reset_handler = twa_scsi_eh_reset,
.bios_param = twa_scsi_biosparam,
.change_queue_depth = scsi_change_queue_depth,
.can_queue = TW_Q_LENGTH-2,
.slave_configure = twa_slave_configure,
.this_id = -1,
.sg_tablesize = TW_APACHE_MAX_SGL_LENGTH,
.max_sectors = TW_MAX_SECTORS,
.cmd_per_lun = TW_MAX_CMDS_PER_LUN,
.shost_attrs = twa_host_attrs,
.emulated = 1,
.no_write_same = 1,
};
/* This function will probe and initialize a card */
static int twa_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
{
struct Scsi_Host *host = NULL;
TW_Device_Extension *tw_dev;
unsigned long mem_addr, mem_len;
int retval;
retval = pci_enable_device(pdev);
if (retval) {
TW_PRINTK(host, TW_DRIVER, 0x34, "Failed to enable pci device");
goto out_disable_device;
}
pci_set_master(pdev);
pci_try_set_mwi(pdev);
retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
if (retval)
retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (retval) {
TW_PRINTK(host, TW_DRIVER, 0x23, "Failed to set dma mask");
retval = -ENODEV;
goto out_disable_device;
}
host = scsi_host_alloc(&driver_template, sizeof(TW_Device_Extension));
if (!host) {
TW_PRINTK(host, TW_DRIVER, 0x24, "Failed to allocate memory for device extension");
retval = -ENOMEM;
goto out_disable_device;
}
tw_dev = (TW_Device_Extension *)host->hostdata;
/* Save values to device extension */
tw_dev->host = host;
tw_dev->tw_pci_dev = pdev;
if (twa_initialize_device_extension(tw_dev)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x25, "Failed to initialize device extension");
retval = -ENOMEM;
goto out_free_device_extension;
}
/* Request IO regions */
retval = pci_request_regions(pdev, "3w-9xxx");
if (retval) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x26, "Failed to get mem region");
goto out_free_device_extension;
}
if (pdev->device == PCI_DEVICE_ID_3WARE_9000) {
mem_addr = pci_resource_start(pdev, 1);
mem_len = pci_resource_len(pdev, 1);
} else {
mem_addr = pci_resource_start(pdev, 2);
mem_len = pci_resource_len(pdev, 2);
}
/* Save base address */
tw_dev->base_addr = ioremap(mem_addr, mem_len);
if (!tw_dev->base_addr) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x35, "Failed to ioremap");
retval = -ENOMEM;
goto out_release_mem_region;
}
/* Disable interrupts on the card */
TW_DISABLE_INTERRUPTS(tw_dev);
/* Initialize the card */
if (twa_reset_sequence(tw_dev, 0)) {
retval = -ENOMEM;
goto out_iounmap;
}
/* Set host specific parameters */
if ((pdev->device == PCI_DEVICE_ID_3WARE_9650SE) ||
(pdev->device == PCI_DEVICE_ID_3WARE_9690SA))
host->max_id = TW_MAX_UNITS_9650SE;
else
host->max_id = TW_MAX_UNITS;
host->max_cmd_len = TW_MAX_CDB_LEN;
/* Channels aren't supported by adapter */
host->max_lun = TW_MAX_LUNS(tw_dev->tw_compat_info.working_srl);
host->max_channel = 0;
/* Register the card with the kernel SCSI layer */
retval = scsi_add_host(host, &pdev->dev);
if (retval) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x27, "scsi add host failed");
goto out_iounmap;
}
pci_set_drvdata(pdev, host);
printk(KERN_WARNING "3w-9xxx: scsi%d: Found a 3ware 9000 Storage Controller at 0x%lx, IRQ: %d.\n",
host->host_no, mem_addr, pdev->irq);
printk(KERN_WARNING "3w-9xxx: scsi%d: Firmware %s, BIOS %s, Ports: %d.\n",
host->host_no,
(char *)twa_get_param(tw_dev, 0, TW_VERSION_TABLE,
TW_PARAM_FWVER, TW_PARAM_FWVER_LENGTH),
(char *)twa_get_param(tw_dev, 1, TW_VERSION_TABLE,
TW_PARAM_BIOSVER, TW_PARAM_BIOSVER_LENGTH),
le32_to_cpu(*(int *)twa_get_param(tw_dev, 2, TW_INFORMATION_TABLE,
TW_PARAM_PORTCOUNT, TW_PARAM_PORTCOUNT_LENGTH)));
/* Try to enable MSI */
if (use_msi && (pdev->device != PCI_DEVICE_ID_3WARE_9000) &&
!pci_enable_msi(pdev))
set_bit(TW_USING_MSI, &tw_dev->flags);
/* Now setup the interrupt handler */
retval = request_irq(pdev->irq, twa_interrupt, IRQF_SHARED, "3w-9xxx", tw_dev);
if (retval) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x30, "Error requesting IRQ");
goto out_remove_host;
}
twa_device_extension_list[twa_device_extension_count] = tw_dev;
twa_device_extension_count++;
/* Re-enable interrupts on the card */
TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
/* Finally, scan the host */
scsi_scan_host(host);
if (twa_major == -1) {
if ((twa_major = register_chrdev (0, "twa", &twa_fops)) < 0)
TW_PRINTK(host, TW_DRIVER, 0x29, "Failed to register character device");
}
return 0;
out_remove_host:
if (test_bit(TW_USING_MSI, &tw_dev->flags))
pci_disable_msi(pdev);
scsi_remove_host(host);
out_iounmap:
iounmap(tw_dev->base_addr);
out_release_mem_region:
pci_release_regions(pdev);
out_free_device_extension:
twa_free_device_extension(tw_dev);
scsi_host_put(host);
out_disable_device:
pci_disable_device(pdev);
return retval;
} /* End twa_probe() */
/* This function is called to remove a device */
static void twa_remove(struct pci_dev *pdev)
{
struct Scsi_Host *host = pci_get_drvdata(pdev);
TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
scsi_remove_host(tw_dev->host);
/* Unregister character device */
if (twa_major >= 0) {
unregister_chrdev(twa_major, "twa");
twa_major = -1;
}
/* Shutdown the card */
__twa_shutdown(tw_dev);
/* Disable MSI if enabled */
if (test_bit(TW_USING_MSI, &tw_dev->flags))
pci_disable_msi(pdev);
/* Free IO remapping */
iounmap(tw_dev->base_addr);
/* Free up the mem region */
pci_release_regions(pdev);
/* Free up device extension resources */
twa_free_device_extension(tw_dev);
scsi_host_put(tw_dev->host);
pci_disable_device(pdev);
twa_device_extension_count--;
} /* End twa_remove() */
#ifdef CONFIG_PM
/* This function is called on PCI suspend */
static int twa_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct Scsi_Host *host = pci_get_drvdata(pdev);
TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
printk(KERN_WARNING "3w-9xxx: Suspending host %d.\n", tw_dev->host->host_no);
TW_DISABLE_INTERRUPTS(tw_dev);
free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
if (test_bit(TW_USING_MSI, &tw_dev->flags))
pci_disable_msi(pdev);
/* Tell the card we are shutting down */
if (twa_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x38, "Connection shutdown failed during suspend");
} else {
printk(KERN_WARNING "3w-9xxx: Suspend complete.\n");
}
TW_CLEAR_ALL_INTERRUPTS(tw_dev);
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
} /* End twa_suspend() */
/* This function is called on PCI resume */
static int twa_resume(struct pci_dev *pdev)
{
int retval = 0;
struct Scsi_Host *host = pci_get_drvdata(pdev);
TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
printk(KERN_WARNING "3w-9xxx: Resuming host %d.\n", tw_dev->host->host_no);
pci_set_power_state(pdev, PCI_D0);
pci_enable_wake(pdev, PCI_D0, 0);
pci_restore_state(pdev);
retval = pci_enable_device(pdev);
if (retval) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x39, "Enable device failed during resume");
return retval;
}
pci_set_master(pdev);
pci_try_set_mwi(pdev);
retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
if (retval)
retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (retval) {
TW_PRINTK(host, TW_DRIVER, 0x40, "Failed to set dma mask during resume");
retval = -ENODEV;
goto out_disable_device;
}
/* Initialize the card */
if (twa_reset_sequence(tw_dev, 0)) {
retval = -ENODEV;
goto out_disable_device;
}
/* Now setup the interrupt handler */
retval = request_irq(pdev->irq, twa_interrupt, IRQF_SHARED, "3w-9xxx", tw_dev);
if (retval) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x42, "Error requesting IRQ during resume");
retval = -ENODEV;
goto out_disable_device;
}
/* Now enable MSI if enabled */
if (test_bit(TW_USING_MSI, &tw_dev->flags))
pci_enable_msi(pdev);
/* Re-enable interrupts on the card */
TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
printk(KERN_WARNING "3w-9xxx: Resume complete.\n");
return 0;
out_disable_device:
scsi_remove_host(host);
pci_disable_device(pdev);
return retval;
} /* End twa_resume() */
#endif
/* PCI Devices supported by this driver */
static struct pci_device_id twa_pci_tbl[] = {
{ PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9000,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9550SX,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9650SE,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9690SA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ }
};
MODULE_DEVICE_TABLE(pci, twa_pci_tbl);
/* pci_driver initializer */
static struct pci_driver twa_driver = {
.name = "3w-9xxx",
.id_table = twa_pci_tbl,
.probe = twa_probe,
.remove = twa_remove,
#ifdef CONFIG_PM
.suspend = twa_suspend,
.resume = twa_resume,
#endif
.shutdown = twa_shutdown
};
/* This function is called on driver initialization */
static int __init twa_init(void)
{
printk(KERN_WARNING "3ware 9000 Storage Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION);
return pci_register_driver(&twa_driver);
} /* End twa_init() */
/* This function is called on driver exit */
static void __exit twa_exit(void)
{
pci_unregister_driver(&twa_driver);
} /* End twa_exit() */
module_init(twa_init);
module_exit(twa_exit);