linux-stable/arch/x86/xen/smp_pv.c

464 lines
11 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* Xen SMP support
*
* This file implements the Xen versions of smp_ops. SMP under Xen is
* very straightforward. Bringing a CPU up is simply a matter of
* loading its initial context and setting it running.
*
* IPIs are handled through the Xen event mechanism.
*
* Because virtual CPUs can be scheduled onto any real CPU, there's no
* useful topology information for the kernel to make use of. As a
* result, all CPUs are treated as if they're single-core and
* single-threaded.
*/
#include <linux/sched.h>
#include <linux/sched/task_stack.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/irq_work.h>
#include <linux/tick.h>
#include <linux/nmi.h>
#include <linux/cpuhotplug.h>
x86/stackprotector: Remove the call to boot_init_stack_canary() from cpu_startup_entry() The following commit: d7880812b359 ("idle: Add the stack canary init to cpu_startup_entry()") ... added an x86 specific boot_init_stack_canary() call to the generic cpu_startup_entry() as a temporary hack, with the intention to remove the #ifdef CONFIG_X86 later. More than 5 years later let's finally realize that plan! :-) While implementing stack protector support for PowerPC, we found that calling boot_init_stack_canary() is also needed for PowerPC which uses per task (TLS) stack canary like the X86. However, calling boot_init_stack_canary() would break architectures using a global stack canary (ARM, SH, MIPS and XTENSA). Instead of modifying the #ifdef CONFIG_X86 to an even messier: #if defined(CONFIG_X86) || defined(CONFIG_PPC) PowerPC implemented the call to boot_init_stack_canary() in the function calling cpu_startup_entry(). Let's try the same cleanup on the x86 side as well. On x86 we have two functions calling cpu_startup_entry(): - start_secondary() - cpu_bringup_and_idle() start_secondary() already calls boot_init_stack_canary(), so it's good, and this patch adds the call to boot_init_stack_canary() in cpu_bringup_and_idle(). I.e. now x86 catches up to the rest of the world and the ugly init sequence in init/main.c can be removed from cpu_startup_entry(). As a final benefit we can also remove the <linux/stackprotector.h> dependency from <linux/sched.h>. [ mingo: Improved the changelog a bit, added language explaining x86 borkage and sched.h change. ] Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linuxppc-dev@lists.ozlabs.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20181020072649.5B59310483E@pc16082vm.idsi0.si.c-s.fr Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-20 07:26:49 +00:00
#include <linux/stackprotector.h>
mm: reorder includes after introduction of linux/pgtable.h The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:32:42 +00:00
#include <linux/pgtable.h>
#include <asm/paravirt.h>
#include <asm/idtentry.h>
#include <asm/desc.h>
#include <asm/cpu.h>
#include <asm/io_apic.h>
#include <xen/interface/xen.h>
#include <xen/interface/vcpu.h>
#include <xen/interface/xenpmu.h>
#include <asm/spec-ctrl.h>
#include <asm/xen/interface.h>
#include <asm/xen/hypercall.h>
#include <xen/xen.h>
#include <xen/page.h>
#include <xen/events.h>
#include <xen/hvc-console.h>
#include "xen-ops.h"
#include "mmu.h"
#include "smp.h"
#include "pmu.h"
cpumask_var_t xen_cpu_initialized_map;
static DEFINE_PER_CPU(struct xen_common_irq, xen_irq_work) = { .irq = -1 };
static DEFINE_PER_CPU(struct xen_common_irq, xen_pmu_irq) = { .irq = -1 };
static irqreturn_t xen_irq_work_interrupt(int irq, void *dev_id);
static void cpu_bringup(void)
{
int cpu;
2019-07-10 19:42:46 +00:00
cr4_init();
cpuhp_ap_sync_alive();
cpu_init();
fpu__init_cpu();
touch_softlockup_watchdog();
/* PVH runs in ring 0 and allows us to do native syscalls. Yay! */
if (!xen_feature(XENFEAT_supervisor_mode_kernel)) {
xen_enable_sysenter();
xen_enable_syscall();
}
cpu = smp_processor_id();
smp_store_cpu_info(cpu);
cpu_data(cpu).x86_max_cores = 1;
set_cpu_sibling_map(cpu);
speculative_store_bypass_ht_init();
xen_setup_cpu_clockevents();
notify_cpu_starting(cpu);
set_cpu_online(cpu, true);
smp_mb();
/* We can take interrupts now: we're officially "up". */
local_irq_enable();
}
asmlinkage __visible void cpu_bringup_and_idle(void)
{
cpu_bringup();
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
}
void xen_smp_intr_free_pv(unsigned int cpu)
{
kfree(per_cpu(xen_irq_work, cpu).name);
per_cpu(xen_irq_work, cpu).name = NULL;
if (per_cpu(xen_irq_work, cpu).irq >= 0) {
unbind_from_irqhandler(per_cpu(xen_irq_work, cpu).irq, NULL);
per_cpu(xen_irq_work, cpu).irq = -1;
}
kfree(per_cpu(xen_pmu_irq, cpu).name);
per_cpu(xen_pmu_irq, cpu).name = NULL;
if (per_cpu(xen_pmu_irq, cpu).irq >= 0) {
unbind_from_irqhandler(per_cpu(xen_pmu_irq, cpu).irq, NULL);
per_cpu(xen_pmu_irq, cpu).irq = -1;
}
}
int xen_smp_intr_init_pv(unsigned int cpu)
{
int rc;
char *callfunc_name, *pmu_name;
callfunc_name = kasprintf(GFP_KERNEL, "irqwork%d", cpu);
per_cpu(xen_irq_work, cpu).name = callfunc_name;
rc = bind_ipi_to_irqhandler(XEN_IRQ_WORK_VECTOR,
cpu,
xen_irq_work_interrupt,
IRQF_PERCPU|IRQF_NOBALANCING,
callfunc_name,
NULL);
if (rc < 0)
goto fail;
per_cpu(xen_irq_work, cpu).irq = rc;
xen: fix is_xen_pmu() is_xen_pmu() is taking the cpu number as parameter, but it is not using it. Instead it just tests whether the Xen PMU initialization on the current cpu did succeed. As this test is done by checking a percpu pointer, preemption needs to be disabled in order to avoid switching the cpu while doing the test. While resuming from suspend() this seems not to be the case: [ 88.082751] ACPI: PM: Low-level resume complete [ 88.087933] ACPI: EC: EC started [ 88.091464] ACPI: PM: Restoring platform NVS memory [ 88.097166] xen_acpi_processor: Uploading Xen processor PM info [ 88.103850] Enabling non-boot CPUs ... [ 88.108128] installing Xen timer for CPU 1 [ 88.112763] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-sleep/7138 [ 88.122256] caller is is_xen_pmu+0x12/0x30 [ 88.126937] CPU: 0 PID: 7138 Comm: systemd-sleep Tainted: G W 5.16.13-2.fc32.qubes.x86_64 #1 [ 88.137939] Hardware name: Star Labs StarBook/StarBook, BIOS 7.97 03/21/2022 [ 88.145930] Call Trace: [ 88.148757] <TASK> [ 88.151193] dump_stack_lvl+0x48/0x5e [ 88.155381] check_preemption_disabled+0xde/0xe0 [ 88.160641] is_xen_pmu+0x12/0x30 [ 88.164441] xen_smp_intr_init_pv+0x75/0x100 Fix that by replacing is_xen_pmu() by a simple boolean variable which reflects the Xen PMU initialization state on cpu 0. Modify xen_pmu_init() to return early in case it is being called for a cpu other than cpu 0 and the boolean variable not being set. Fixes: bf6dfb154d93 ("xen/PMU: PMU emulation code") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20220325142002.31789-1-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2022-03-25 14:20:02 +00:00
if (is_xen_pmu) {
pmu_name = kasprintf(GFP_KERNEL, "pmu%d", cpu);
per_cpu(xen_pmu_irq, cpu).name = pmu_name;
rc = bind_virq_to_irqhandler(VIRQ_XENPMU, cpu,
xen_pmu_irq_handler,
IRQF_PERCPU|IRQF_NOBALANCING,
pmu_name, NULL);
if (rc < 0)
goto fail;
per_cpu(xen_pmu_irq, cpu).irq = rc;
}
return 0;
fail:
xen_smp_intr_free_pv(cpu);
return rc;
}
static void __init _get_smp_config(unsigned int early)
{
int i, rc;
unsigned int subtract = 0;
if (early)
return;
num_processors = 0;
disabled_cpus = 0;
for (i = 0; i < nr_cpu_ids; i++) {
rc = HYPERVISOR_vcpu_op(VCPUOP_is_up, i, NULL);
if (rc >= 0) {
num_processors++;
set_cpu_possible(i, true);
} else {
set_cpu_possible(i, false);
set_cpu_present(i, false);
subtract++;
}
}
#ifdef CONFIG_HOTPLUG_CPU
/* This is akin to using 'nr_cpus' on the Linux command line.
* Which is OK as when we use 'dom0_max_vcpus=X' we can only
* have up to X, while nr_cpu_ids is greater than X. This
* normally is not a problem, except when CPU hotplugging
* is involved and then there might be more than X CPUs
* in the guest - which will not work as there is no
* hypercall to expand the max number of VCPUs an already
* running guest has. So cap it up to X. */
if (subtract)
set_nr_cpu_ids(nr_cpu_ids - subtract);
#endif
/* Pretend to be a proper enumerated system */
smp_found_config = 1;
}
static void __init xen_pv_smp_prepare_boot_cpu(void)
{
BUG_ON(smp_processor_id() != 0);
native_smp_prepare_boot_cpu();
if (!xen_feature(XENFEAT_writable_page_tables))
/* We've switched to the "real" per-cpu gdt, so make
* sure the old memory can be recycled. */
make_lowmem_page_readwrite(xen_initial_gdt);
xen_setup_vcpu_info_placement();
/*
* The alternative logic (which patches the unlock/lock) runs before
* the smp bootup up code is activated. Hence we need to set this up
* the core kernel is being patched. Otherwise we will have only
* modules patched but not core code.
*/
xen_init_spinlocks();
}
static void __init xen_pv_smp_prepare_cpus(unsigned int max_cpus)
{
unsigned cpu;
if (ioapic_is_disabled) {
char *m = (max_cpus == 0) ?
"The nosmp parameter is incompatible with Xen; " \
"use Xen dom0_max_vcpus=1 parameter" :
"The noapic parameter is incompatible with Xen";
xen_raw_printk(m);
panic(m);
}
xen_init_lock_cpu(0);
smp_prepare_cpus_common();
cpu_data(0).x86_max_cores = 1;
speculative_store_bypass_ht_init();
xen_pmu_init(0);
if (xen_smp_intr_init(0) || xen_smp_intr_init_pv(0))
BUG();
if (!alloc_cpumask_var(&xen_cpu_initialized_map, GFP_KERNEL))
panic("could not allocate xen_cpu_initialized_map\n");
cpumask_copy(xen_cpu_initialized_map, cpumask_of(0));
/* Restrict the possible_map according to max_cpus. */
while ((num_possible_cpus() > 1) && (num_possible_cpus() > max_cpus)) {
for (cpu = nr_cpu_ids - 1; !cpu_possible(cpu); cpu--)
continue;
set_cpu_possible(cpu, false);
}
for_each_possible_cpu(cpu)
set_cpu_present(cpu, true);
}
static int
cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
{
struct vcpu_guest_context *ctxt;
struct desc_struct *gdt;
unsigned long gdt_mfn;
if (cpumask_test_and_set_cpu(cpu, xen_cpu_initialized_map))
return 0;
ctxt = kzalloc(sizeof(*ctxt), GFP_KERNEL);
if (ctxt == NULL) {
cpumask_clear_cpu(cpu, xen_cpu_initialized_map);
return -ENOMEM;
}
gdt = get_cpu_gdt_rw(cpu);
/*
* Bring up the CPU in cpu_bringup_and_idle() with the stack
* pointing just below where pt_regs would be if it were a normal
* kernel entry.
*/
ctxt->user_regs.eip = (unsigned long)asm_cpu_bringup_and_idle;
ctxt->flags = VGCF_IN_KERNEL;
ctxt->user_regs.eflags = 0x1000; /* IOPL_RING1 */
ctxt->user_regs.ds = __USER_DS;
ctxt->user_regs.es = __USER_DS;
ctxt->user_regs.ss = __KERNEL_DS;
ctxt->user_regs.cs = __KERNEL_CS;
ctxt->user_regs.esp = (unsigned long)task_pt_regs(idle);
xen_copy_trap_info(ctxt->trap_ctxt);
BUG_ON((unsigned long)gdt & ~PAGE_MASK);
gdt_mfn = arbitrary_virt_to_mfn(gdt);
make_lowmem_page_readonly(gdt);
make_lowmem_page_readonly(mfn_to_virt(gdt_mfn));
ctxt->gdt_frames[0] = gdt_mfn;
ctxt->gdt_ents = GDT_ENTRIES;
/*
* Set SS:SP that Xen will use when entering guest kernel mode
* from guest user mode. Subsequent calls to load_sp0() can
* change this value.
*/
ctxt->kernel_ss = __KERNEL_DS;
ctxt->kernel_sp = task_top_of_stack(idle);
ctxt->gs_base_kernel = per_cpu_offset(cpu);
ctxt->event_callback_eip =
(unsigned long)xen_asm_exc_xen_hypervisor_callback;
ctxt->failsafe_callback_eip =
(unsigned long)xen_failsafe_callback;
per_cpu(xen_cr3, cpu) = __pa(swapper_pg_dir);
ctxt->ctrlreg[3] = xen_pfn_to_cr3(virt_to_gfn(swapper_pg_dir));
if (HYPERVISOR_vcpu_op(VCPUOP_initialise, xen_vcpu_nr(cpu), ctxt))
BUG();
kfree(ctxt);
return 0;
}
static int xen_pv_kick_ap(unsigned int cpu, struct task_struct *idle)
{
int rc;
x86/irq/32: Handle irq stack allocation failure proper irq_ctx_init() crashes hard on page allocation failures. While that's ok during early boot, it's just wrong in the CPU hotplug bringup code. Check the page allocation failure and return -ENOMEM and handle it at the call sites. On early boot the only way out is to BUG(), but on CPU hotplug there is no reason to crash, so just abort the operation. Rename the function to something more sensible while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Alison Schofield <alison.schofield@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Nicolai Stange <nstange@suse.de> Cc: Pu Wen <puwen@hygon.cn> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: x86-ml <x86@kernel.org> Cc: xen-devel@lists.xenproject.org Cc: Yazen Ghannam <yazen.ghannam@amd.com> Cc: Yi Wang <wang.yi59@zte.com.cn> Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com> Link: https://lkml.kernel.org/r/20190414160146.089060584@linutronix.de
2019-04-14 16:00:04 +00:00
rc = common_cpu_up(cpu, idle);
if (rc)
return rc;
xen_setup_runstate_info(cpu);
/* make sure interrupts start blocked */
per_cpu(xen_vcpu, cpu)->evtchn_upcall_mask = 1;
rc = cpu_initialize_context(cpu, idle);
if (rc)
return rc;
xen_pmu_init(cpu);
/*
* Why is this a BUG? If the hypercall fails then everything can be
* rolled back, no?
*/
BUG_ON(HYPERVISOR_vcpu_op(VCPUOP_up, xen_vcpu_nr(cpu), NULL));
return 0;
}
static void xen_pv_poll_sync_state(void)
{
HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
}
#ifdef CONFIG_HOTPLUG_CPU
static int xen_pv_cpu_disable(void)
{
unsigned int cpu = smp_processor_id();
if (cpu == 0)
return -EBUSY;
cpu_disable_common();
load_cr3(swapper_pg_dir);
return 0;
}
static void xen_pv_cpu_die(unsigned int cpu)
{
while (HYPERVISOR_vcpu_op(VCPUOP_is_up, xen_vcpu_nr(cpu), NULL)) {
__set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(HZ/10);
}
}
static void xen_pv_cleanup_dead_cpu(unsigned int cpu)
{
xen_smp_intr_free(cpu);
xen_uninit_lock_cpu(cpu);
xen_teardown_timer(cpu);
xen_pmu_finish(cpu);
}
static void __noreturn xen_pv_play_dead(void) /* used only with HOTPLUG_CPU */
{
play_dead_common();
HYPERVISOR_vcpu_op(VCPUOP_down, xen_vcpu_nr(smp_processor_id()), NULL);
xen_cpu_bringup_again((unsigned long)task_pt_regs(current));
BUG();
}
#else /* !CONFIG_HOTPLUG_CPU */
static int xen_pv_cpu_disable(void)
{
return -ENOSYS;
}
static void xen_pv_cpu_die(unsigned int cpu)
{
BUG();
}
static void xen_pv_cleanup_dead_cpu(unsigned int cpu)
{
BUG();
}
static void __noreturn xen_pv_play_dead(void)
{
BUG();
}
#endif
static void stop_self(void *v)
{
int cpu = smp_processor_id();
/* make sure we're not pinning something down */
load_cr3(swapper_pg_dir);
/* should set up a minimal gdt */
set_cpu_online(cpu, false);
HYPERVISOR_vcpu_op(VCPUOP_down, xen_vcpu_nr(cpu), NULL);
BUG();
}
static void xen_pv_stop_other_cpus(int wait)
{
smp_call_function(stop_self, NULL, wait);
}
static irqreturn_t xen_irq_work_interrupt(int irq, void *dev_id)
{
irq_work_run();
inc_irq_stat(apic_irq_work_irqs);
return IRQ_HANDLED;
}
static const struct smp_ops xen_smp_ops __initconst = {
.smp_prepare_boot_cpu = xen_pv_smp_prepare_boot_cpu,
.smp_prepare_cpus = xen_pv_smp_prepare_cpus,
.smp_cpus_done = xen_smp_cpus_done,
.kick_ap_alive = xen_pv_kick_ap,
.cpu_die = xen_pv_cpu_die,
.cleanup_dead_cpu = xen_pv_cleanup_dead_cpu,
.poll_sync_state = xen_pv_poll_sync_state,
.cpu_disable = xen_pv_cpu_disable,
.play_dead = xen_pv_play_dead,
.stop_other_cpus = xen_pv_stop_other_cpus,
.smp_send_reschedule = xen_smp_send_reschedule,
.send_call_func_ipi = xen_smp_send_call_function_ipi,
.send_call_func_single_ipi = xen_smp_send_call_function_single_ipi,
};
void __init xen_smp_init(void)
{
smp_ops = xen_smp_ops;
/* Avoid searching for BIOS MP tables */
x86_init.mpparse.find_smp_config = x86_init_noop;
x86_init.mpparse.get_smp_config = _get_smp_config;
}