2005-11-09 22:58:16 +00:00
|
|
|
/*
|
|
|
|
* linux/drivers/ide/pci/cs5535.c
|
|
|
|
*
|
|
|
|
* Copyright (C) 2004-2005 Advanced Micro Devices, Inc.
|
|
|
|
*
|
|
|
|
* History:
|
|
|
|
* 09/20/2005 - Jaya Kumar <jayakumar.ide@gmail.com>
|
|
|
|
* - Reworked tuneproc, set_drive, misc mods to prep for mainline
|
|
|
|
* - Work was sponsored by CIS (M) Sdn Bhd.
|
|
|
|
* Ported to Kernel 2.6.11 on June 26, 2005 by
|
|
|
|
* Wolfgang Zuleger <wolfgang.zuleger@gmx.de>
|
|
|
|
* Alexander Kiausch <alex.kiausch@t-online.de>
|
|
|
|
* Originally developed by AMD for 2.4/2.6
|
|
|
|
*
|
|
|
|
* Development of this chipset driver was funded
|
|
|
|
* by the nice folks at National Semiconductor/AMD.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
|
|
* the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* Documentation:
|
|
|
|
* CS5535 documentation available from AMD
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/ide.h>
|
|
|
|
|
|
|
|
#include "ide-timing.h"
|
|
|
|
|
|
|
|
#define MSR_ATAC_BASE 0x51300000
|
|
|
|
#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0)
|
|
|
|
#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01)
|
|
|
|
#define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02)
|
|
|
|
#define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03)
|
|
|
|
#define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04)
|
|
|
|
#define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05)
|
|
|
|
#define ATAC_IO_BAR (MSR_ATAC_BASE+0x08)
|
|
|
|
#define ATAC_RESET (MSR_ATAC_BASE+0x10)
|
|
|
|
#define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20)
|
|
|
|
#define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21)
|
|
|
|
#define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22)
|
|
|
|
#define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23)
|
|
|
|
#define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24)
|
|
|
|
#define ATAC_BM0_CMD_PRIM 0x00
|
|
|
|
#define ATAC_BM0_STS_PRIM 0x02
|
|
|
|
#define ATAC_BM0_PRD 0x04
|
|
|
|
#define CS5535_CABLE_DETECT 0x48
|
|
|
|
|
|
|
|
/* Format I PIO settings. We seperate out cmd and data for safer timings */
|
|
|
|
|
|
|
|
static unsigned int cs5535_pio_cmd_timings[5] =
|
|
|
|
{ 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 };
|
|
|
|
static unsigned int cs5535_pio_dta_timings[5] =
|
|
|
|
{ 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 };
|
|
|
|
|
|
|
|
static unsigned int cs5535_mwdma_timings[3] =
|
|
|
|
{ 0x7F0FFFF3, 0x7F035352, 0x7f024241 };
|
|
|
|
|
|
|
|
static unsigned int cs5535_udma_timings[5] =
|
|
|
|
{ 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 };
|
|
|
|
|
|
|
|
/* Macros to check if the register is the reset value - reset value is an
|
|
|
|
invalid timing and indicates the register has not been set previously */
|
|
|
|
|
|
|
|
#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL) == 0x00009172 )
|
|
|
|
#define CS5535_BAD_DMA(timings) ( (timings & 0x000FFFFF) == 0x00077771 )
|
|
|
|
|
|
|
|
/****
|
|
|
|
* cs5535_set_speed - Configure the chipset to the new speed
|
|
|
|
* @drive: Drive to set up
|
|
|
|
* @speed: desired speed
|
|
|
|
*
|
|
|
|
* cs5535_set_speed() configures the chipset to a new speed.
|
|
|
|
*/
|
|
|
|
static void cs5535_set_speed(ide_drive_t *drive, u8 speed)
|
|
|
|
{
|
|
|
|
|
|
|
|
u32 reg = 0, dummy;
|
|
|
|
int unit = drive->select.b.unit;
|
|
|
|
|
|
|
|
|
|
|
|
/* Set the PIO timings */
|
|
|
|
if ((speed & XFER_MODE) == XFER_PIO) {
|
|
|
|
u8 pioa;
|
|
|
|
u8 piob;
|
|
|
|
u8 cmd;
|
|
|
|
|
|
|
|
pioa = speed - XFER_PIO_0;
|
|
|
|
piob = ide_get_best_pio_mode(&(drive->hwif->drives[!unit]),
|
|
|
|
255, 4, NULL);
|
|
|
|
cmd = pioa < piob ? pioa : piob;
|
|
|
|
|
|
|
|
/* Write the speed of the current drive */
|
|
|
|
reg = (cs5535_pio_cmd_timings[cmd] << 16) |
|
|
|
|
cs5535_pio_dta_timings[pioa];
|
|
|
|
wrmsr(unit ? ATAC_CH0D1_PIO : ATAC_CH0D0_PIO, reg, 0);
|
|
|
|
|
|
|
|
/* And if nessesary - change the speed of the other drive */
|
|
|
|
rdmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, dummy);
|
|
|
|
|
|
|
|
if (((reg >> 16) & cs5535_pio_cmd_timings[cmd]) !=
|
|
|
|
cs5535_pio_cmd_timings[cmd]) {
|
|
|
|
reg &= 0x0000FFFF;
|
|
|
|
reg |= cs5535_pio_cmd_timings[cmd] << 16;
|
|
|
|
wrmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Set bit 31 of the DMA register for PIO format 1 timings */
|
|
|
|
rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
|
|
|
|
wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA,
|
|
|
|
reg | 0x80000000UL, 0);
|
|
|
|
} else {
|
|
|
|
rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
|
|
|
|
|
|
|
|
reg &= 0x80000000UL; /* Preserve the PIO format bit */
|
|
|
|
|
|
|
|
if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_7)
|
|
|
|
reg |= cs5535_udma_timings[speed - XFER_UDMA_0];
|
|
|
|
else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
|
|
|
|
reg |= cs5535_mwdma_timings[speed - XFER_MW_DMA_0];
|
|
|
|
else
|
|
|
|
return;
|
|
|
|
|
|
|
|
wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, 0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/****
|
|
|
|
* cs5535_set_drive - Configure the drive to the new speed
|
|
|
|
* @drive: Drive to set up
|
|
|
|
* @speed: desired speed
|
|
|
|
*
|
|
|
|
* cs5535_set_drive() configures the drive and the chipset to a
|
|
|
|
* new speed. It also can be called by upper layers.
|
|
|
|
*/
|
|
|
|
static int cs5535_set_drive(ide_drive_t *drive, u8 speed)
|
|
|
|
{
|
2007-05-09 22:01:08 +00:00
|
|
|
speed = ide_rate_filter(drive, speed);
|
2005-11-09 22:58:16 +00:00
|
|
|
ide_config_drive_speed(drive, speed);
|
|
|
|
cs5535_set_speed(drive, speed);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/****
|
|
|
|
* cs5535_tuneproc - PIO setup
|
|
|
|
* @drive: drive to set up
|
|
|
|
* @pio: mode to use (255 for 'best possible')
|
|
|
|
*
|
|
|
|
* A callback from the upper layers for PIO-only tuning.
|
|
|
|
*/
|
|
|
|
static void cs5535_tuneproc(ide_drive_t *drive, u8 xferspeed)
|
|
|
|
{
|
|
|
|
u8 modes[] = { XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3,
|
|
|
|
XFER_PIO_4 };
|
|
|
|
|
|
|
|
/* cs5535 max pio is pio 4, best_pio will check the blacklist.
|
|
|
|
i think we don't need to rate_filter the incoming xferspeed
|
|
|
|
since we know we're only going to choose pio */
|
|
|
|
xferspeed = ide_get_best_pio_mode(drive, xferspeed, 4, NULL);
|
|
|
|
ide_config_drive_speed(drive, modes[xferspeed]);
|
|
|
|
cs5535_set_speed(drive, xferspeed);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int cs5535_dma_check(ide_drive_t *drive)
|
|
|
|
{
|
|
|
|
u8 speed;
|
|
|
|
|
|
|
|
drive->init_speed = 0;
|
|
|
|
|
2007-05-09 22:01:09 +00:00
|
|
|
if (ide_tune_dma(drive))
|
2007-02-17 01:40:26 +00:00
|
|
|
return 0;
|
2005-11-09 22:58:16 +00:00
|
|
|
|
2007-02-17 01:40:25 +00:00
|
|
|
if (ide_use_fast_pio(drive)) {
|
2005-11-09 22:58:16 +00:00
|
|
|
speed = ide_get_best_pio_mode(drive, 255, 4, NULL);
|
|
|
|
cs5535_set_drive(drive, speed);
|
|
|
|
}
|
2007-02-17 01:40:25 +00:00
|
|
|
|
2007-02-17 01:40:26 +00:00
|
|
|
return -1;
|
2005-11-09 22:58:16 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static u8 __devinit cs5535_cable_detect(struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
u8 bit;
|
|
|
|
|
|
|
|
/* if a 80 wire cable was detected */
|
|
|
|
pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit);
|
2007-07-09 21:17:58 +00:00
|
|
|
|
|
|
|
return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
|
2005-11-09 22:58:16 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/****
|
|
|
|
* init_hwif_cs5535 - Initialize one ide cannel
|
|
|
|
* @hwif: Channel descriptor
|
|
|
|
*
|
|
|
|
* This gets invoked by the IDE driver once for each channel. It
|
|
|
|
* performs channel-specific pre-initialization before drive probing.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
hwif->autodma = 0;
|
|
|
|
|
|
|
|
hwif->tuneproc = &cs5535_tuneproc;
|
|
|
|
hwif->speedproc = &cs5535_set_drive;
|
|
|
|
hwif->ide_dma_check = &cs5535_dma_check;
|
|
|
|
|
|
|
|
hwif->atapi_dma = 1;
|
|
|
|
hwif->ultra_mask = 0x1F;
|
|
|
|
hwif->mwdma_mask = 0x07;
|
|
|
|
|
2007-07-09 21:17:58 +00:00
|
|
|
hwif->cbl = cs5535_cable_detect(hwif->pci_dev);
|
2005-11-09 22:58:16 +00:00
|
|
|
|
|
|
|
if (!noautodma)
|
|
|
|
hwif->autodma = 1;
|
|
|
|
|
|
|
|
/* just setting autotune and not worrying about bios timings */
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
|
|
hwif->drives[i].autotune = 1;
|
|
|
|
hwif->drives[i].autodma = hwif->autodma;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static ide_pci_device_t cs5535_chipset __devinitdata = {
|
|
|
|
.name = "CS5535",
|
|
|
|
.init_hwif = init_hwif_cs5535,
|
|
|
|
.channels = 1,
|
|
|
|
.autodma = AUTODMA,
|
|
|
|
.bootable = ON_BOARD,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __devinit cs5535_init_one(struct pci_dev *dev,
|
|
|
|
const struct pci_device_id *id)
|
|
|
|
{
|
|
|
|
return ide_setup_pci_device(dev, &cs5535_chipset);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct pci_device_id cs5535_pci_tbl[] =
|
|
|
|
{
|
|
|
|
{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_IDE, PCI_ANY_ID,
|
|
|
|
PCI_ANY_ID, 0, 0, 0},
|
|
|
|
{ 0, },
|
|
|
|
};
|
|
|
|
|
|
|
|
MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl);
|
|
|
|
|
|
|
|
static struct pci_driver driver = {
|
|
|
|
.name = "CS5535_IDE",
|
|
|
|
.id_table = cs5535_pci_tbl,
|
|
|
|
.probe = cs5535_init_one,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init cs5535_ide_init(void)
|
|
|
|
{
|
|
|
|
return ide_pci_register_driver(&driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(cs5535_ide_init);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("AMD");
|
|
|
|
MODULE_DESCRIPTION("PCI driver module for AMD/NS CS5535 IDE");
|
|
|
|
MODULE_LICENSE("GPL");
|