linux-stable/kernel/kcsan/kcsan.h

143 lines
3.6 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* The Kernel Concurrency Sanitizer (KCSAN) infrastructure. For more info please
* see Documentation/dev-tools/kcsan.rst.
*
* Copyright (C) 2019, Google LLC.
*/
#ifndef _KERNEL_KCSAN_KCSAN_H
#define _KERNEL_KCSAN_KCSAN_H
#include <linux/atomic.h>
#include <linux/kcsan.h>
#include <linux/sched.h>
/* The number of adjacent watchpoints to check. */
#define KCSAN_CHECK_ADJACENT 1
kcsan: Avoid blocking producers in prepare_report() To avoid deadlock in case watchers can be interrupted, we need to ensure that producers of the struct other_info can never be blocked by an unrelated consumer. (Likely to occur with KCSAN_INTERRUPT_WATCHER.) There are several cases that can lead to this scenario, for example: 1. A watchpoint A was set up by task T1, but interrupted by interrupt I1. Some other thread (task or interrupt) finds watchpoint A consumes it, and sets other_info. Then I1 also finds some unrelated watchpoint B, consumes it, but is blocked because other_info is in use. T1 cannot consume other_info because I1 never returns -> deadlock. 2. A watchpoint A was set up by task T1, but interrupted by interrupt I1, which also sets up a watchpoint B. Some other thread finds watchpoint A, and consumes it and sets up other_info with its information. Similarly some other thread finds watchpoint B and consumes it, but is then blocked because other_info is in use. When I1 continues it sees its watchpoint was consumed, and that it must wait for other_info, which currently contains information to be consumed by T1. However, T1 cannot unblock other_info because I1 never returns -> deadlock. To avoid this, we need to ensure that producers of struct other_info always have a usable other_info entry. This is obviously not the case with only a single instance of struct other_info, as concurrent producers must wait for the entry to be released by some consumer (which may be locked up as illustrated above). While it would be nice if producers could simply call kmalloc() and append their instance of struct other_info to a list, we are very limited in this code path: since KCSAN can instrument the allocators themselves, calling kmalloc() could lead to deadlock or corrupted allocator state. Since producers of the struct other_info will always succeed at try_consume_watchpoint(), preceding the call into kcsan_report(), we know that the particular watchpoint slot cannot simply be reused or consumed by another potential other_info producer. If we move removal of a watchpoint after reporting (by the consumer of struct other_info), we can see a consumed watchpoint as a held lock on elements of other_info, if we create a one-to-one mapping of a watchpoint to an other_info element. Therefore, the simplest solution is to create an array of struct other_info that is as large as the watchpoints array in core.c, and pass the watchpoint index to kcsan_report() for producers and consumers, and change watchpoints to be removed after reporting is done. With a default config on a 64-bit system, the array other_infos consumes ~37KiB. For most systems today this is not a problem. On smaller memory constrained systems, the config value CONFIG_KCSAN_NUM_WATCHPOINTS can be reduced appropriately. Overall, this change is a simplification of the prepare_report() code, and makes some of the checks (such as checking if at least one access is a write) redundant. Tested: $ tools/testing/selftests/rcutorture/bin/kvm.sh \ --cpus 12 --duration 10 --kconfig "CONFIG_DEBUG_INFO=y \ CONFIG_KCSAN=y CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=n \ CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY=n \ CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000 CONFIG_KCSAN_VERBOSE=y \ CONFIG_KCSAN_INTERRUPT_WATCHER=y CONFIG_PROVE_LOCKING=y" \ --configs TREE03 => No longer hangs and runs to completion as expected. Reported-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-03-18 17:38:45 +00:00
#define NUM_SLOTS (1 + 2*KCSAN_CHECK_ADJACENT)
extern unsigned int kcsan_udelay_task;
extern unsigned int kcsan_udelay_interrupt;
/*
* Globally enable and disable KCSAN.
*/
extern bool kcsan_enabled;
/*
* Save/restore IRQ flags state trace dirtied by KCSAN.
*/
void kcsan_save_irqtrace(struct task_struct *task);
void kcsan_restore_irqtrace(struct task_struct *task);
/*
* Statistics counters displayed via debugfs; should only be modified in
* slow-paths.
*/
enum kcsan_counter_id {
/*
* Number of watchpoints currently in use.
*/
KCSAN_COUNTER_USED_WATCHPOINTS,
/*
* Total number of watchpoints set up.
*/
KCSAN_COUNTER_SETUP_WATCHPOINTS,
/*
* Total number of data races.
*/
KCSAN_COUNTER_DATA_RACES,
/*
* Total number of ASSERT failures due to races. If the observed race is
* due to two conflicting ASSERT type accesses, then both will be
* counted.
*/
KCSAN_COUNTER_ASSERT_FAILURES,
/*
* Number of times no watchpoints were available.
*/
KCSAN_COUNTER_NO_CAPACITY,
/*
* A thread checking a watchpoint raced with another checking thread;
* only one will be reported.
*/
KCSAN_COUNTER_REPORT_RACES,
/*
* Observed data value change, but writer thread unknown.
*/
KCSAN_COUNTER_RACES_UNKNOWN_ORIGIN,
/*
* The access cannot be encoded to a valid watchpoint.
*/
KCSAN_COUNTER_UNENCODABLE_ACCESSES,
/*
* Watchpoint encoding caused a watchpoint to fire on mismatching
* accesses.
*/
KCSAN_COUNTER_ENCODING_FALSE_POSITIVES,
KCSAN_COUNTER_COUNT, /* number of counters */
};
extern atomic_long_t kcsan_counters[KCSAN_COUNTER_COUNT];
/*
* Returns true if data races in the function symbol that maps to func_addr
* (offsets are ignored) should *not* be reported.
*/
extern bool kcsan_skip_report_debugfs(unsigned long func_addr);
/*
* Value-change states.
*/
enum kcsan_value_change {
/*
* Did not observe a value-change, however, it is valid to report the
* race, depending on preferences.
*/
KCSAN_VALUE_CHANGE_MAYBE,
/*
* Did not observe a value-change, and it is invalid to report the race.
*/
KCSAN_VALUE_CHANGE_FALSE,
/*
* The value was observed to change, and the race should be reported.
*/
KCSAN_VALUE_CHANGE_TRUE,
};
/*
* The calling thread hit and consumed a watchpoint: set the access information
* to be consumed by the reporting thread. No report is printed yet.
*/
kcsan: Distinguish kcsan_report() calls Currently kcsan_report() is used to handle three distinct cases: * The caller hit a watchpoint when attempting an access. Some information regarding the caller and access are recorded, but no output is produced. * A caller which previously setup a watchpoint detected that the watchpoint has been hit, and possibly detected a change to the location in memory being watched. This may result in output reporting the interaction between this caller and the caller which hit the watchpoint. * A caller detected a change to a modification to a memory location which wasn't detected by a watchpoint, for which there is no information on the other thread. This may result in output reporting the unexpected change. ... depending on the specific case the caller has distinct pieces of information available, but the prototype of kcsan_report() has to handle all three cases. This means that in some cases we pass redundant information, and in others we don't pass all the information we could pass. This also means that the report code has to demux these three cases. So that we can pass some additional information while also simplifying the callers and report code, add separate kcsan_report_*() functions for the distinct cases, updating callers accordingly. As the watchpoint_idx is unused in the case of kcsan_report_unknown_origin(), this passes a dummy value into kcsan_report(). Subsequent patches will refactor the report code to avoid this. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> [ elver@google.com: try to make kcsan_report_*() names more descriptive ] Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-04-14 11:28:18 +00:00
void kcsan_report_set_info(const volatile void *ptr, size_t size, int access_type,
unsigned long ip, int watchpoint_idx);
/*
* The calling thread observed that the watchpoint it set up was hit and
* consumed: print the full report based on information set by the racing
* thread.
*/
kcsan: Distinguish kcsan_report() calls Currently kcsan_report() is used to handle three distinct cases: * The caller hit a watchpoint when attempting an access. Some information regarding the caller and access are recorded, but no output is produced. * A caller which previously setup a watchpoint detected that the watchpoint has been hit, and possibly detected a change to the location in memory being watched. This may result in output reporting the interaction between this caller and the caller which hit the watchpoint. * A caller detected a change to a modification to a memory location which wasn't detected by a watchpoint, for which there is no information on the other thread. This may result in output reporting the unexpected change. ... depending on the specific case the caller has distinct pieces of information available, but the prototype of kcsan_report() has to handle all three cases. This means that in some cases we pass redundant information, and in others we don't pass all the information we could pass. This also means that the report code has to demux these three cases. So that we can pass some additional information while also simplifying the callers and report code, add separate kcsan_report_*() functions for the distinct cases, updating callers accordingly. As the watchpoint_idx is unused in the case of kcsan_report_unknown_origin(), this passes a dummy value into kcsan_report(). Subsequent patches will refactor the report code to avoid this. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> [ elver@google.com: try to make kcsan_report_*() names more descriptive ] Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-04-14 11:28:18 +00:00
void kcsan_report_known_origin(const volatile void *ptr, size_t size, int access_type,
unsigned long ip, enum kcsan_value_change value_change,
int watchpoint_idx, u64 old, u64 new, u64 mask);
/*
* No other thread was observed to race with the access, but the data value
* before and after the stall differs. Reports a race of "unknown origin".
*/
kcsan: Report observed value changes When a thread detects that a memory location was modified without its watchpoint being hit, the report notes that a change was detected, but does not provide concrete values for the change. Knowing the concrete values can be very helpful in tracking down any racy writers (e.g. as specific values may only be written in some portions of code, or under certain conditions). When we detect a modification, let's report the concrete old/new values, along with the access's mask of relevant bits (and which relevant bits were modified). This can make it easier to identify potential racy writers. As the snapshots are at most 8 bytes, we can only report values for acceses up to this size, but this appears to cater for the common case. When we detect a race via a watchpoint, we may or may not have concrete values for the modification. To be helpful, let's attempt to log them when we do as they can be ignored where irrelevant. The resulting reports appears as follows, with values zero-padded to the access width: | ================================================================== | BUG: KCSAN: data-race in el0_svc_common+0x34/0x25c arch/arm64/kernel/syscall.c:96 | | race at unknown origin, with read to 0xffff00007ae6aa00 of 8 bytes by task 223 on cpu 1: | el0_svc_common+0x34/0x25c arch/arm64/kernel/syscall.c:96 | do_el0_svc+0x48/0xec arch/arm64/kernel/syscall.c:178 | el0_svc arch/arm64/kernel/entry-common.c:226 [inline] | el0_sync_handler+0x1a4/0x390 arch/arm64/kernel/entry-common.c:236 | el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:674 | | value changed: 0x0000000000000000 -> 0x0000000000000002 | | Reported by Kernel Concurrency Sanitizer on: | CPU: 1 PID: 223 Comm: syz-executor.1 Not tainted 5.8.0-rc3-00094-ga73f923ecc8e-dirty #3 | Hardware name: linux,dummy-virt (DT) | ================================================================== If an access mask is set, it is shown underneath the "value changed" line as "bits changed: 0x<bits changed> with mask 0x<non-zero mask>". Signed-off-by: Mark Rutland <mark.rutland@arm.com> [ elver@google.com: align "value changed" and "bits changed" lines, which required massaging the message; do not print bits+mask if no mask set. ] Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-04-14 11:28:24 +00:00
void kcsan_report_unknown_origin(const volatile void *ptr, size_t size, int access_type,
unsigned long ip, u64 old, u64 new, u64 mask);
#endif /* _KERNEL_KCSAN_KCSAN_H */