linux-stable/arch/x86/kernel/ftrace_64.S

326 lines
7.9 KiB
ArmAsm
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2014 Steven Rostedt, Red Hat Inc
*/
#include <linux/linkage.h>
#include <asm/ptrace.h>
#include <asm/ftrace.h>
#include <asm/export.h>
#include <asm/nospec-branch.h>
#include <asm/unwind_hints.h>
#include <asm/frame.h>
.code64
.section .text, "ax"
#ifdef CONFIG_FRAME_POINTER
/* Save parent and function stack frames (rip and rbp) */
# define MCOUNT_FRAME_SIZE (8+16*2)
#else
/* No need to save a stack frame */
# define MCOUNT_FRAME_SIZE 0
#endif /* CONFIG_FRAME_POINTER */
/* Size of stack used to save mcount regs in save_mcount_regs */
#define MCOUNT_REG_SIZE (FRAME_SIZE + MCOUNT_FRAME_SIZE)
/*
* gcc -pg option adds a call to 'mcount' in most functions.
* When -mfentry is used, the call is to 'fentry' and not 'mcount'
* and is done before the function's stack frame is set up.
* They both require a set of regs to be saved before calling
* any C code and restored before returning back to the function.
*
* On boot up, all these calls are converted into nops. When tracing
* is enabled, the call can jump to either ftrace_caller or
* ftrace_regs_caller. Callbacks (tracing functions) that require
* ftrace_regs_caller (like kprobes) need to have pt_regs passed to
* it. For this reason, the size of the pt_regs structure will be
* allocated on the stack and the required mcount registers will
* be saved in the locations that pt_regs has them in.
*/
/*
* @added: the amount of stack added before calling this
*
* After this is called, the following registers contain:
*
* %rdi - holds the address that called the trampoline
* %rsi - holds the parent function (traced function's return address)
* %rdx - holds the original %rbp
*/
.macro save_mcount_regs added=0
#ifdef CONFIG_FRAME_POINTER
/* Save the original rbp */
pushq %rbp
/*
* Stack traces will stop at the ftrace trampoline if the frame pointer
* is not set up properly. If fentry is used, we need to save a frame
* pointer for the parent as well as the function traced, because the
* fentry is called before the stack frame is set up, where as mcount
* is called afterward.
*/
/* Save the parent pointer (skip orig rbp and our return address) */
pushq \added+8*2(%rsp)
pushq %rbp
movq %rsp, %rbp
/* Save the return address (now skip orig rbp, rbp and parent) */
pushq \added+8*3(%rsp)
pushq %rbp
movq %rsp, %rbp
#endif /* CONFIG_FRAME_POINTER */
/*
* We add enough stack to save all regs.
*/
subq $(FRAME_SIZE), %rsp
movq %rax, RAX(%rsp)
movq %rcx, RCX(%rsp)
movq %rdx, RDX(%rsp)
movq %rsi, RSI(%rsp)
movq %rdi, RDI(%rsp)
movq %r8, R8(%rsp)
movq %r9, R9(%rsp)
movq $0, ORIG_RAX(%rsp)
/*
* Save the original RBP. Even though the mcount ABI does not
* require this, it helps out callers.
*/
#ifdef CONFIG_FRAME_POINTER
movq MCOUNT_REG_SIZE-8(%rsp), %rdx
#else
movq %rbp, %rdx
#endif
movq %rdx, RBP(%rsp)
/* Copy the parent address into %rsi (second parameter) */
movq MCOUNT_REG_SIZE+8+\added(%rsp), %rsi
/* Move RIP to its proper location */
movq MCOUNT_REG_SIZE+\added(%rsp), %rdi
movq %rdi, RIP(%rsp)
/*
* Now %rdi (the first parameter) has the return address of
* where ftrace_call returns. But the callbacks expect the
* address of the call itself.
*/
subq $MCOUNT_INSN_SIZE, %rdi
.endm
.macro restore_mcount_regs save=0
/* ftrace_regs_caller or frame pointers require this */
movq RBP(%rsp), %rbp
movq R9(%rsp), %r9
movq R8(%rsp), %r8
movq RDI(%rsp), %rdi
movq RSI(%rsp), %rsi
movq RDX(%rsp), %rdx
movq RCX(%rsp), %rcx
movq RAX(%rsp), %rax
addq $MCOUNT_REG_SIZE-\save, %rsp
.endm
#ifdef CONFIG_DYNAMIC_FTRACE
SYM_FUNC_START(__fentry__)
retq
SYM_FUNC_END(__fentry__)
EXPORT_SYMBOL(__fentry__)
x86/asm: Change all ENTRY+ENDPROC to SYM_FUNC_* These are all functions which are invoked from elsewhere, so annotate them as global using the new SYM_FUNC_START and their ENDPROC's by SYM_FUNC_END. Make sure ENTRY/ENDPROC is not defined on X86_64, given these were the last users. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [hibernate] Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> [xen bits] Acked-by: Herbert Xu <herbert@gondor.apana.org.au> [crypto] Cc: Allison Randal <allison@lohutok.net> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andy Shevchenko <andy@infradead.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Armijn Hemel <armijn@tjaldur.nl> Cc: Cao jin <caoj.fnst@cn.fujitsu.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Enrico Weigelt <info@metux.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jim Mattson <jmattson@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: kvm ML <kvm@vger.kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: linux-arch@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: linux-efi <linux-efi@vger.kernel.org> Cc: linux-efi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: platform-driver-x86@vger.kernel.org Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Wei Huang <wei@redhat.com> Cc: x86-ml <x86@kernel.org> Cc: xen-devel@lists.xenproject.org Cc: Xiaoyao Li <xiaoyao.li@linux.intel.com> Link: https://lkml.kernel.org/r/20191011115108.12392-25-jslaby@suse.cz
2019-10-11 11:51:04 +00:00
SYM_FUNC_START(ftrace_caller)
/* save_mcount_regs fills in first two parameters */
save_mcount_regs
/* Stack - skipping return address of ftrace_caller */
leaq MCOUNT_REG_SIZE+8(%rsp), %rcx
movq %rcx, RSP(%rsp)
SYM_INNER_LABEL(ftrace_caller_op_ptr, SYM_L_GLOBAL)
/* Load the ftrace_ops into the 3rd parameter */
movq function_trace_op(%rip), %rdx
/* regs go into 4th parameter */
leaq (%rsp), %rcx
/* Only ops with REGS flag set should have CS register set */
movq $0, CS(%rsp)
SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
call ftrace_stub
/* Handlers can change the RIP */
movq RIP(%rsp), %rax
movq %rax, MCOUNT_REG_SIZE(%rsp)
restore_mcount_regs
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops The current method of handling multiple function callbacks is to register a list function callback that calls all the other callbacks based on their hash tables and compare it to the function that the callback was called on. But this is very inefficient. For example, if you are tracing all functions in the kernel and then add a kprobe to a function such that the kprobe uses ftrace, the mcount trampoline will switch from calling the function trace callback to calling the list callback that will iterate over all registered ftrace_ops (in this case, the function tracer and the kprobes callback). That means for every function being traced it checks the hash of the ftrace_ops for function tracing and kprobes, even though the kprobes is only set at a single function. The kprobes ftrace_ops is checked for every function being traced! Instead of calling the list function for functions that are only being traced by a single callback, we can call a dynamically allocated trampoline that calls the callback directly. The function graph tracer already uses a direct call trampoline when it is being traced by itself but it is not dynamically allocated. It's trampoline is static in the kernel core. The infrastructure that called the function graph trampoline can also be used to call a dynamically allocated one. For now, only ftrace_ops that are not dynamically allocated can have a trampoline. That is, users such as function tracer or stack tracer. kprobes and perf allocate their ftrace_ops, and until there's a safe way to free the trampoline, it can not be used. The dynamically allocated ftrace_ops may, although, use the trampoline if the kernel is not compiled with CONFIG_PREEMPT. But that will come later. Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 03:23:31 +00:00
/*
* The code up to this label is copied into trampolines so
* think twice before adding any new code or changing the
* layout here.
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops The current method of handling multiple function callbacks is to register a list function callback that calls all the other callbacks based on their hash tables and compare it to the function that the callback was called on. But this is very inefficient. For example, if you are tracing all functions in the kernel and then add a kprobe to a function such that the kprobe uses ftrace, the mcount trampoline will switch from calling the function trace callback to calling the list callback that will iterate over all registered ftrace_ops (in this case, the function tracer and the kprobes callback). That means for every function being traced it checks the hash of the ftrace_ops for function tracing and kprobes, even though the kprobes is only set at a single function. The kprobes ftrace_ops is checked for every function being traced! Instead of calling the list function for functions that are only being traced by a single callback, we can call a dynamically allocated trampoline that calls the callback directly. The function graph tracer already uses a direct call trampoline when it is being traced by itself but it is not dynamically allocated. It's trampoline is static in the kernel core. The infrastructure that called the function graph trampoline can also be used to call a dynamically allocated one. For now, only ftrace_ops that are not dynamically allocated can have a trampoline. That is, users such as function tracer or stack tracer. kprobes and perf allocate their ftrace_ops, and until there's a safe way to free the trampoline, it can not be used. The dynamically allocated ftrace_ops may, although, use the trampoline if the kernel is not compiled with CONFIG_PREEMPT. But that will come later. Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 03:23:31 +00:00
*/
x86,ftrace: Fix ftrace_regs_caller() unwind The ftrace_regs_caller() trampoline does something 'funny' when there is a direct-caller present. In that case it stuffs the 'direct-caller' address on the return stack and then exits the function. This then results in 'returning' to the direct-caller with the exact registers we came in with -- an indirect tail-call without using a register. This however (rightfully) confuses objtool because the function shares a few instruction in order to have a single exit path, but the stack layout is different for them, depending through which path we came there. This is currently cludged by forcing the stack state to the non-direct case, but this generates actively wrong (ORC) unwind information for the direct case, leading to potential broken unwinds. Fix this issue by fully separating the exit paths. This results in having to poke a second RET into the trampoline copy, see ftrace_regs_caller_ret. This brings us to a second objtool problem, in order for it to perceive the 'jmp ftrace_epilogue' as a function exit, it needs to be recognised as a tail call. In order to make that happen, ftrace_epilogue needs to be the start of an STT_FUNC, so re-arrange code to make this so. Finally, a third issue is that objtool requires functions to exit with the same stack layout they started with, which is obviously violated in the direct case, employ the new HINT_RET_OFFSET to tell objtool this is an expected exception. Together, this results in generating correct ORC unwind information for the ftrace_regs_caller() function and it's trampoline copies. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200416115118.749606694@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-04-01 14:53:19 +00:00
SYM_INNER_LABEL(ftrace_caller_end, SYM_L_GLOBAL)
x86,ftrace: Fix ftrace_regs_caller() unwind The ftrace_regs_caller() trampoline does something 'funny' when there is a direct-caller present. In that case it stuffs the 'direct-caller' address on the return stack and then exits the function. This then results in 'returning' to the direct-caller with the exact registers we came in with -- an indirect tail-call without using a register. This however (rightfully) confuses objtool because the function shares a few instruction in order to have a single exit path, but the stack layout is different for them, depending through which path we came there. This is currently cludged by forcing the stack state to the non-direct case, but this generates actively wrong (ORC) unwind information for the direct case, leading to potential broken unwinds. Fix this issue by fully separating the exit paths. This results in having to poke a second RET into the trampoline copy, see ftrace_regs_caller_ret. This brings us to a second objtool problem, in order for it to perceive the 'jmp ftrace_epilogue' as a function exit, it needs to be recognised as a tail call. In order to make that happen, ftrace_epilogue needs to be the start of an STT_FUNC, so re-arrange code to make this so. Finally, a third issue is that objtool requires functions to exit with the same stack layout they started with, which is obviously violated in the direct case, employ the new HINT_RET_OFFSET to tell objtool this is an expected exception. Together, this results in generating correct ORC unwind information for the ftrace_regs_caller() function and it's trampoline copies. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200416115118.749606694@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-04-01 14:53:19 +00:00
jmp ftrace_epilogue
SYM_FUNC_END(ftrace_caller);
SYM_FUNC_START(ftrace_epilogue)
/*
* This is weak to keep gas from relaxing the jumps.
* It is also used to copy the retq for trampolines.
*/
SYM_INNER_LABEL_ALIGN(ftrace_stub, SYM_L_WEAK)
UNWIND_HINT_FUNC
retq
x86,ftrace: Fix ftrace_regs_caller() unwind The ftrace_regs_caller() trampoline does something 'funny' when there is a direct-caller present. In that case it stuffs the 'direct-caller' address on the return stack and then exits the function. This then results in 'returning' to the direct-caller with the exact registers we came in with -- an indirect tail-call without using a register. This however (rightfully) confuses objtool because the function shares a few instruction in order to have a single exit path, but the stack layout is different for them, depending through which path we came there. This is currently cludged by forcing the stack state to the non-direct case, but this generates actively wrong (ORC) unwind information for the direct case, leading to potential broken unwinds. Fix this issue by fully separating the exit paths. This results in having to poke a second RET into the trampoline copy, see ftrace_regs_caller_ret. This brings us to a second objtool problem, in order for it to perceive the 'jmp ftrace_epilogue' as a function exit, it needs to be recognised as a tail call. In order to make that happen, ftrace_epilogue needs to be the start of an STT_FUNC, so re-arrange code to make this so. Finally, a third issue is that objtool requires functions to exit with the same stack layout they started with, which is obviously violated in the direct case, employ the new HINT_RET_OFFSET to tell objtool this is an expected exception. Together, this results in generating correct ORC unwind information for the ftrace_regs_caller() function and it's trampoline copies. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200416115118.749606694@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-04-01 14:53:19 +00:00
SYM_FUNC_END(ftrace_epilogue)
x86/asm: Change all ENTRY+ENDPROC to SYM_FUNC_* These are all functions which are invoked from elsewhere, so annotate them as global using the new SYM_FUNC_START and their ENDPROC's by SYM_FUNC_END. Make sure ENTRY/ENDPROC is not defined on X86_64, given these were the last users. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [hibernate] Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> [xen bits] Acked-by: Herbert Xu <herbert@gondor.apana.org.au> [crypto] Cc: Allison Randal <allison@lohutok.net> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andy Shevchenko <andy@infradead.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Armijn Hemel <armijn@tjaldur.nl> Cc: Cao jin <caoj.fnst@cn.fujitsu.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Enrico Weigelt <info@metux.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jim Mattson <jmattson@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: kvm ML <kvm@vger.kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: linux-arch@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: linux-efi <linux-efi@vger.kernel.org> Cc: linux-efi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: platform-driver-x86@vger.kernel.org Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Wei Huang <wei@redhat.com> Cc: x86-ml <x86@kernel.org> Cc: xen-devel@lists.xenproject.org Cc: Xiaoyao Li <xiaoyao.li@linux.intel.com> Link: https://lkml.kernel.org/r/20191011115108.12392-25-jslaby@suse.cz
2019-10-11 11:51:04 +00:00
SYM_FUNC_START(ftrace_regs_caller)
/* Save the current flags before any operations that can change them */
pushfq
/* added 8 bytes to save flags */
save_mcount_regs 8
/* save_mcount_regs fills in first two parameters */
SYM_INNER_LABEL(ftrace_regs_caller_op_ptr, SYM_L_GLOBAL)
/* Load the ftrace_ops into the 3rd parameter */
movq function_trace_op(%rip), %rdx
/* Save the rest of pt_regs */
movq %r15, R15(%rsp)
movq %r14, R14(%rsp)
movq %r13, R13(%rsp)
movq %r12, R12(%rsp)
movq %r11, R11(%rsp)
movq %r10, R10(%rsp)
movq %rbx, RBX(%rsp)
/* Copy saved flags */
movq MCOUNT_REG_SIZE(%rsp), %rcx
movq %rcx, EFLAGS(%rsp)
/* Kernel segments */
movq $__KERNEL_DS, %rcx
movq %rcx, SS(%rsp)
movq $__KERNEL_CS, %rcx
movq %rcx, CS(%rsp)
/* Stack - skipping return address and flags */
leaq MCOUNT_REG_SIZE+8*2(%rsp), %rcx
movq %rcx, RSP(%rsp)
ENCODE_FRAME_POINTER
/* regs go into 4th parameter */
leaq (%rsp), %rcx
SYM_INNER_LABEL(ftrace_regs_call, SYM_L_GLOBAL)
call ftrace_stub
/* Copy flags back to SS, to restore them */
movq EFLAGS(%rsp), %rax
movq %rax, MCOUNT_REG_SIZE(%rsp)
/* Handlers can change the RIP */
movq RIP(%rsp), %rax
movq %rax, MCOUNT_REG_SIZE+8(%rsp)
/* restore the rest of pt_regs */
movq R15(%rsp), %r15
movq R14(%rsp), %r14
movq R13(%rsp), %r13
movq R12(%rsp), %r12
movq R10(%rsp), %r10
movq RBX(%rsp), %rbx
movq ORIG_RAX(%rsp), %rax
movq %rax, MCOUNT_REG_SIZE-8(%rsp)
x86,ftrace: Fix ftrace_regs_caller() unwind The ftrace_regs_caller() trampoline does something 'funny' when there is a direct-caller present. In that case it stuffs the 'direct-caller' address on the return stack and then exits the function. This then results in 'returning' to the direct-caller with the exact registers we came in with -- an indirect tail-call without using a register. This however (rightfully) confuses objtool because the function shares a few instruction in order to have a single exit path, but the stack layout is different for them, depending through which path we came there. This is currently cludged by forcing the stack state to the non-direct case, but this generates actively wrong (ORC) unwind information for the direct case, leading to potential broken unwinds. Fix this issue by fully separating the exit paths. This results in having to poke a second RET into the trampoline copy, see ftrace_regs_caller_ret. This brings us to a second objtool problem, in order for it to perceive the 'jmp ftrace_epilogue' as a function exit, it needs to be recognised as a tail call. In order to make that happen, ftrace_epilogue needs to be the start of an STT_FUNC, so re-arrange code to make this so. Finally, a third issue is that objtool requires functions to exit with the same stack layout they started with, which is obviously violated in the direct case, employ the new HINT_RET_OFFSET to tell objtool this is an expected exception. Together, this results in generating correct ORC unwind information for the ftrace_regs_caller() function and it's trampoline copies. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200416115118.749606694@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-04-01 14:53:19 +00:00
/*
* If ORIG_RAX is anything but zero, make this a call to that.
* See arch_ftrace_set_direct_caller().
*/
testq %rax, %rax
SYM_INNER_LABEL(ftrace_regs_caller_jmp, SYM_L_GLOBAL)
jnz 1f
restore_mcount_regs
/* Restore flags */
popfq
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops The current method of handling multiple function callbacks is to register a list function callback that calls all the other callbacks based on their hash tables and compare it to the function that the callback was called on. But this is very inefficient. For example, if you are tracing all functions in the kernel and then add a kprobe to a function such that the kprobe uses ftrace, the mcount trampoline will switch from calling the function trace callback to calling the list callback that will iterate over all registered ftrace_ops (in this case, the function tracer and the kprobes callback). That means for every function being traced it checks the hash of the ftrace_ops for function tracing and kprobes, even though the kprobes is only set at a single function. The kprobes ftrace_ops is checked for every function being traced! Instead of calling the list function for functions that are only being traced by a single callback, we can call a dynamically allocated trampoline that calls the callback directly. The function graph tracer already uses a direct call trampoline when it is being traced by itself but it is not dynamically allocated. It's trampoline is static in the kernel core. The infrastructure that called the function graph trampoline can also be used to call a dynamically allocated one. For now, only ftrace_ops that are not dynamically allocated can have a trampoline. That is, users such as function tracer or stack tracer. kprobes and perf allocate their ftrace_ops, and until there's a safe way to free the trampoline, it can not be used. The dynamically allocated ftrace_ops may, although, use the trampoline if the kernel is not compiled with CONFIG_PREEMPT. But that will come later. Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 03:23:31 +00:00
/*
* As this jmp to ftrace_epilogue can be a short jump
ftrace/x86: Add dynamic allocated trampoline for ftrace_ops The current method of handling multiple function callbacks is to register a list function callback that calls all the other callbacks based on their hash tables and compare it to the function that the callback was called on. But this is very inefficient. For example, if you are tracing all functions in the kernel and then add a kprobe to a function such that the kprobe uses ftrace, the mcount trampoline will switch from calling the function trace callback to calling the list callback that will iterate over all registered ftrace_ops (in this case, the function tracer and the kprobes callback). That means for every function being traced it checks the hash of the ftrace_ops for function tracing and kprobes, even though the kprobes is only set at a single function. The kprobes ftrace_ops is checked for every function being traced! Instead of calling the list function for functions that are only being traced by a single callback, we can call a dynamically allocated trampoline that calls the callback directly. The function graph tracer already uses a direct call trampoline when it is being traced by itself but it is not dynamically allocated. It's trampoline is static in the kernel core. The infrastructure that called the function graph trampoline can also be used to call a dynamically allocated one. For now, only ftrace_ops that are not dynamically allocated can have a trampoline. That is, users such as function tracer or stack tracer. kprobes and perf allocate their ftrace_ops, and until there's a safe way to free the trampoline, it can not be used. The dynamically allocated ftrace_ops may, although, use the trampoline if the kernel is not compiled with CONFIG_PREEMPT. But that will come later. Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-03 03:23:31 +00:00
* it must not be copied into the trampoline.
* The trampoline will add the code to jump
* to the return.
*/
SYM_INNER_LABEL(ftrace_regs_caller_end, SYM_L_GLOBAL)
jmp ftrace_epilogue
/* Swap the flags with orig_rax */
1: movq MCOUNT_REG_SIZE(%rsp), %rdi
movq %rdi, MCOUNT_REG_SIZE-8(%rsp)
movq %rax, MCOUNT_REG_SIZE(%rsp)
restore_mcount_regs 8
/* Restore flags */
popfq
UNWIND_HINT_FUNC
jmp ftrace_epilogue
x86/asm: Change all ENTRY+ENDPROC to SYM_FUNC_* These are all functions which are invoked from elsewhere, so annotate them as global using the new SYM_FUNC_START and their ENDPROC's by SYM_FUNC_END. Make sure ENTRY/ENDPROC is not defined on X86_64, given these were the last users. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [hibernate] Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> [xen bits] Acked-by: Herbert Xu <herbert@gondor.apana.org.au> [crypto] Cc: Allison Randal <allison@lohutok.net> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andy Shevchenko <andy@infradead.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Armijn Hemel <armijn@tjaldur.nl> Cc: Cao jin <caoj.fnst@cn.fujitsu.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Enrico Weigelt <info@metux.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jim Mattson <jmattson@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: kvm ML <kvm@vger.kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: linux-arch@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: linux-efi <linux-efi@vger.kernel.org> Cc: linux-efi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: platform-driver-x86@vger.kernel.org Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Wei Huang <wei@redhat.com> Cc: x86-ml <x86@kernel.org> Cc: xen-devel@lists.xenproject.org Cc: Xiaoyao Li <xiaoyao.li@linux.intel.com> Link: https://lkml.kernel.org/r/20191011115108.12392-25-jslaby@suse.cz
2019-10-11 11:51:04 +00:00
SYM_FUNC_END(ftrace_regs_caller)
#else /* ! CONFIG_DYNAMIC_FTRACE */
SYM_FUNC_START(__fentry__)
cmpq $ftrace_stub, ftrace_trace_function
jnz trace
SYM_INNER_LABEL(ftrace_stub, SYM_L_GLOBAL)
retq
trace:
/* save_mcount_regs fills in first two parameters */
save_mcount_regs
/*
* When DYNAMIC_FTRACE is not defined, ARCH_SUPPORTS_FTRACE_OPS is not
* set (see include/asm/ftrace.h and include/linux/ftrace.h). Only the
* ip and parent ip are used and the list function is called when
* function tracing is enabled.
*/
movq ftrace_trace_function, %r8
CALL_NOSPEC r8
restore_mcount_regs
jmp ftrace_stub
SYM_FUNC_END(__fentry__)
EXPORT_SYMBOL(__fentry__)
#endif /* CONFIG_DYNAMIC_FTRACE */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
SYM_FUNC_START(return_to_handler)
subq $24, %rsp
/* Save the return values */
movq %rax, (%rsp)
movq %rdx, 8(%rsp)
movq %rbp, %rdi
call ftrace_return_to_handler
movq %rax, %rdi
movq 8(%rsp), %rdx
movq (%rsp), %rax
addq $24, %rsp
JMP_NOSPEC rdi
SYM_FUNC_END(return_to_handler)
#endif