linux-stable/drivers/net/dsa/bcm_sf2_cfp.c

1347 lines
33 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Broadcom Starfighter 2 DSA switch CFP support
*
* Copyright (C) 2016, Broadcom
*/
#include <linux/list.h>
#include <linux/ethtool.h>
#include <linux/if_ether.h>
#include <linux/in.h>
#include <linux/netdevice.h>
#include <net/dsa.h>
#include <linux/bitmap.h>
#include <net/flow_offload.h>
#include <net/switchdev.h>
#include <uapi/linux/if_bridge.h>
#include "bcm_sf2.h"
#include "bcm_sf2_regs.h"
struct cfp_rule {
int port;
struct ethtool_rx_flow_spec fs;
struct list_head next;
};
struct cfp_udf_slice_layout {
u8 slices[UDFS_PER_SLICE];
u32 mask_value;
u32 base_offset;
};
struct cfp_udf_layout {
struct cfp_udf_slice_layout udfs[UDF_NUM_SLICES];
};
static const u8 zero_slice[UDFS_PER_SLICE] = { };
/* UDF slices layout for a TCPv4/UDPv4 specification */
static const struct cfp_udf_layout udf_tcpip4_layout = {
.udfs = {
[1] = {
.slices = {
/* End of L2, byte offset 12, src IP[0:15] */
CFG_UDF_EOL2 | 6,
/* End of L2, byte offset 14, src IP[16:31] */
CFG_UDF_EOL2 | 7,
/* End of L2, byte offset 16, dst IP[0:15] */
CFG_UDF_EOL2 | 8,
/* End of L2, byte offset 18, dst IP[16:31] */
CFG_UDF_EOL2 | 9,
/* End of L3, byte offset 0, src port */
CFG_UDF_EOL3 | 0,
/* End of L3, byte offset 2, dst port */
CFG_UDF_EOL3 | 1,
0, 0, 0
},
.mask_value = L3_FRAMING_MASK | IPPROTO_MASK | IP_FRAG,
.base_offset = CORE_UDF_0_A_0_8_PORT_0 + UDF_SLICE_OFFSET,
},
},
};
/* UDF slices layout for a TCPv6/UDPv6 specification */
static const struct cfp_udf_layout udf_tcpip6_layout = {
.udfs = {
[0] = {
.slices = {
/* End of L2, byte offset 8, src IP[0:15] */
CFG_UDF_EOL2 | 4,
/* End of L2, byte offset 10, src IP[16:31] */
CFG_UDF_EOL2 | 5,
/* End of L2, byte offset 12, src IP[32:47] */
CFG_UDF_EOL2 | 6,
/* End of L2, byte offset 14, src IP[48:63] */
CFG_UDF_EOL2 | 7,
/* End of L2, byte offset 16, src IP[64:79] */
CFG_UDF_EOL2 | 8,
/* End of L2, byte offset 18, src IP[80:95] */
CFG_UDF_EOL2 | 9,
/* End of L2, byte offset 20, src IP[96:111] */
CFG_UDF_EOL2 | 10,
/* End of L2, byte offset 22, src IP[112:127] */
CFG_UDF_EOL2 | 11,
/* End of L3, byte offset 0, src port */
CFG_UDF_EOL3 | 0,
},
.mask_value = L3_FRAMING_MASK | IPPROTO_MASK | IP_FRAG,
.base_offset = CORE_UDF_0_B_0_8_PORT_0,
},
[3] = {
.slices = {
/* End of L2, byte offset 24, dst IP[0:15] */
CFG_UDF_EOL2 | 12,
/* End of L2, byte offset 26, dst IP[16:31] */
CFG_UDF_EOL2 | 13,
/* End of L2, byte offset 28, dst IP[32:47] */
CFG_UDF_EOL2 | 14,
/* End of L2, byte offset 30, dst IP[48:63] */
CFG_UDF_EOL2 | 15,
/* End of L2, byte offset 32, dst IP[64:79] */
CFG_UDF_EOL2 | 16,
/* End of L2, byte offset 34, dst IP[80:95] */
CFG_UDF_EOL2 | 17,
/* End of L2, byte offset 36, dst IP[96:111] */
CFG_UDF_EOL2 | 18,
/* End of L2, byte offset 38, dst IP[112:127] */
CFG_UDF_EOL2 | 19,
/* End of L3, byte offset 2, dst port */
CFG_UDF_EOL3 | 1,
},
.mask_value = L3_FRAMING_MASK | IPPROTO_MASK | IP_FRAG,
.base_offset = CORE_UDF_0_D_0_11_PORT_0,
},
},
};
static inline unsigned int bcm_sf2_get_num_udf_slices(const u8 *layout)
{
unsigned int i, count = 0;
for (i = 0; i < UDFS_PER_SLICE; i++) {
if (layout[i] != 0)
count++;
}
return count;
}
static inline u32 udf_upper_bits(int num_udf)
{
return GENMASK(num_udf - 1, 0) >> (UDFS_PER_SLICE - 1);
}
static inline u32 udf_lower_bits(int num_udf)
{
return (u8)GENMASK(num_udf - 1, 0);
}
static unsigned int bcm_sf2_get_slice_number(const struct cfp_udf_layout *l,
unsigned int start)
{
const struct cfp_udf_slice_layout *slice_layout;
unsigned int slice_idx;
for (slice_idx = start; slice_idx < UDF_NUM_SLICES; slice_idx++) {
slice_layout = &l->udfs[slice_idx];
if (memcmp(slice_layout->slices, zero_slice,
sizeof(zero_slice)))
break;
}
return slice_idx;
}
static void bcm_sf2_cfp_udf_set(struct bcm_sf2_priv *priv,
const struct cfp_udf_layout *layout,
unsigned int slice_num)
{
u32 offset = layout->udfs[slice_num].base_offset;
unsigned int i;
for (i = 0; i < UDFS_PER_SLICE; i++)
core_writel(priv, layout->udfs[slice_num].slices[i],
offset + i * 4);
}
static int bcm_sf2_cfp_op(struct bcm_sf2_priv *priv, unsigned int op)
{
unsigned int timeout = 1000;
u32 reg;
reg = core_readl(priv, CORE_CFP_ACC);
reg &= ~(OP_SEL_MASK | RAM_SEL_MASK);
reg |= OP_STR_DONE | op;
core_writel(priv, reg, CORE_CFP_ACC);
do {
reg = core_readl(priv, CORE_CFP_ACC);
if (!(reg & OP_STR_DONE))
break;
cpu_relax();
} while (timeout--);
if (!timeout)
return -ETIMEDOUT;
return 0;
}
static inline void bcm_sf2_cfp_rule_addr_set(struct bcm_sf2_priv *priv,
unsigned int addr)
{
u32 reg;
WARN_ON(addr >= priv->num_cfp_rules);
reg = core_readl(priv, CORE_CFP_ACC);
reg &= ~(XCESS_ADDR_MASK << XCESS_ADDR_SHIFT);
reg |= addr << XCESS_ADDR_SHIFT;
core_writel(priv, reg, CORE_CFP_ACC);
}
static inline unsigned int bcm_sf2_cfp_rule_size(struct bcm_sf2_priv *priv)
{
/* Entry #0 is reserved */
return priv->num_cfp_rules - 1;
}
static int bcm_sf2_cfp_act_pol_set(struct bcm_sf2_priv *priv,
unsigned int rule_index,
int src_port,
unsigned int port_num,
unsigned int queue_num,
bool fwd_map_change)
{
int ret;
u32 reg;
/* Replace ARL derived destination with DST_MAP derived, define
* which port and queue this should be forwarded to.
*/
if (fwd_map_change)
reg = CHANGE_FWRD_MAP_IB_REP_ARL |
BIT(port_num + DST_MAP_IB_SHIFT) |
CHANGE_TC | queue_num << NEW_TC_SHIFT;
else
reg = 0;
/* Enable looping back to the original port */
if (src_port == port_num)
reg |= LOOP_BK_EN;
core_writel(priv, reg, CORE_ACT_POL_DATA0);
/* Set classification ID that needs to be put in Broadcom tag */
core_writel(priv, rule_index << CHAIN_ID_SHIFT, CORE_ACT_POL_DATA1);
core_writel(priv, 0, CORE_ACT_POL_DATA2);
/* Configure policer RAM now */
ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | ACT_POL_RAM);
if (ret) {
pr_err("Policer entry at %d failed\n", rule_index);
return ret;
}
/* Disable the policer */
core_writel(priv, POLICER_MODE_DISABLE, CORE_RATE_METER0);
/* Now the rate meter */
ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | RATE_METER_RAM);
if (ret) {
pr_err("Meter entry at %d failed\n", rule_index);
return ret;
}
return 0;
}
static void bcm_sf2_cfp_slice_ipv4(struct bcm_sf2_priv *priv,
struct flow_dissector_key_ipv4_addrs *addrs,
struct flow_dissector_key_ports *ports,
const __be16 vlan_tci,
unsigned int slice_num, u8 num_udf,
bool mask)
{
u32 reg, offset;
/* UDF_Valid[7:0] [31:24]
* S-Tag [23:8]
* C-Tag [7:0]
*/
reg = udf_lower_bits(num_udf) << 24 | be16_to_cpu(vlan_tci) >> 8;
if (mask)
core_writel(priv, reg, CORE_CFP_MASK_PORT(5));
else
core_writel(priv, reg, CORE_CFP_DATA_PORT(5));
/* C-Tag [31:24]
* UDF_n_A8 [23:8]
* UDF_n_A7 [7:0]
*/
reg = (u32)(be16_to_cpu(vlan_tci) & 0xff) << 24;
if (mask)
offset = CORE_CFP_MASK_PORT(4);
else
offset = CORE_CFP_DATA_PORT(4);
core_writel(priv, reg, offset);
/* UDF_n_A7 [31:24]
* UDF_n_A6 [23:8]
* UDF_n_A5 [7:0]
*/
reg = be16_to_cpu(ports->dst) >> 8;
if (mask)
offset = CORE_CFP_MASK_PORT(3);
else
offset = CORE_CFP_DATA_PORT(3);
core_writel(priv, reg, offset);
/* UDF_n_A5 [31:24]
* UDF_n_A4 [23:8]
* UDF_n_A3 [7:0]
*/
reg = (be16_to_cpu(ports->dst) & 0xff) << 24 |
(u32)be16_to_cpu(ports->src) << 8 |
(be32_to_cpu(addrs->dst) & 0x0000ff00) >> 8;
if (mask)
offset = CORE_CFP_MASK_PORT(2);
else
offset = CORE_CFP_DATA_PORT(2);
core_writel(priv, reg, offset);
/* UDF_n_A3 [31:24]
* UDF_n_A2 [23:8]
* UDF_n_A1 [7:0]
*/
reg = (u32)(be32_to_cpu(addrs->dst) & 0xff) << 24 |
(u32)(be32_to_cpu(addrs->dst) >> 16) << 8 |
(be32_to_cpu(addrs->src) & 0x0000ff00) >> 8;
if (mask)
offset = CORE_CFP_MASK_PORT(1);
else
offset = CORE_CFP_DATA_PORT(1);
core_writel(priv, reg, offset);
/* UDF_n_A1 [31:24]
* UDF_n_A0 [23:8]
* Reserved [7:4]
* Slice ID [3:2]
* Slice valid [1:0]
*/
reg = (u32)(be32_to_cpu(addrs->src) & 0xff) << 24 |
(u32)(be32_to_cpu(addrs->src) >> 16) << 8 |
SLICE_NUM(slice_num) | SLICE_VALID;
if (mask)
offset = CORE_CFP_MASK_PORT(0);
else
offset = CORE_CFP_DATA_PORT(0);
core_writel(priv, reg, offset);
}
static int bcm_sf2_cfp_ipv4_rule_set(struct bcm_sf2_priv *priv, int port,
unsigned int port_num,
unsigned int queue_num,
struct ethtool_rx_flow_spec *fs)
{
__be16 vlan_tci = 0, vlan_m_tci = htons(0xffff);
struct ethtool_rx_flow_spec_input input = {};
const struct cfp_udf_layout *layout;
unsigned int slice_num, rule_index;
struct ethtool_rx_flow_rule *flow;
struct flow_match_ipv4_addrs ipv4;
struct flow_match_ports ports;
struct flow_match_ip ip;
u8 ip_proto, ip_frag;
u8 num_udf;
u32 reg;
int ret;
switch (fs->flow_type & ~FLOW_EXT) {
case TCP_V4_FLOW:
ip_proto = IPPROTO_TCP;
break;
case UDP_V4_FLOW:
ip_proto = IPPROTO_UDP;
break;
default:
return -EINVAL;
}
ip_frag = !!(be32_to_cpu(fs->h_ext.data[0]) & 1);
/* Extract VLAN TCI */
if (fs->flow_type & FLOW_EXT) {
vlan_tci = fs->h_ext.vlan_tci;
vlan_m_tci = fs->m_ext.vlan_tci;
}
/* Locate the first rule available */
if (fs->location == RX_CLS_LOC_ANY)
rule_index = find_first_zero_bit(priv->cfp.used,
priv->num_cfp_rules);
else
rule_index = fs->location;
if (rule_index > bcm_sf2_cfp_rule_size(priv))
return -ENOSPC;
input.fs = fs;
flow = ethtool_rx_flow_rule_create(&input);
if (IS_ERR(flow))
return PTR_ERR(flow);
flow_rule_match_ipv4_addrs(flow->rule, &ipv4);
flow_rule_match_ports(flow->rule, &ports);
flow_rule_match_ip(flow->rule, &ip);
layout = &udf_tcpip4_layout;
/* We only use one UDF slice for now */
slice_num = bcm_sf2_get_slice_number(layout, 0);
if (slice_num == UDF_NUM_SLICES) {
ret = -EINVAL;
goto out_err_flow_rule;
}
num_udf = bcm_sf2_get_num_udf_slices(layout->udfs[slice_num].slices);
/* Apply the UDF layout for this filter */
bcm_sf2_cfp_udf_set(priv, layout, slice_num);
/* Apply to all packets received through this port */
core_writel(priv, BIT(port), CORE_CFP_DATA_PORT(7));
/* Source port map match */
core_writel(priv, 0xff, CORE_CFP_MASK_PORT(7));
/* S-Tag status [31:30]
* C-Tag status [29:28]
* L2 framing [27:26]
* L3 framing [25:24]
* IP ToS [23:16]
* IP proto [15:08]
* IP Fragm [7]
* Non 1st frag [6]
* IP Authen [5]
* TTL range [4:3]
* PPPoE session [2]
* Reserved [1]
* UDF_Valid[8] [0]
*/
core_writel(priv, ip.key->tos << IPTOS_SHIFT |
ip_proto << IPPROTO_SHIFT | ip_frag << IP_FRAG_SHIFT |
udf_upper_bits(num_udf),
CORE_CFP_DATA_PORT(6));
/* Mask with the specific layout for IPv4 packets */
core_writel(priv, layout->udfs[slice_num].mask_value |
udf_upper_bits(num_udf), CORE_CFP_MASK_PORT(6));
/* Program the match and the mask */
bcm_sf2_cfp_slice_ipv4(priv, ipv4.key, ports.key, vlan_tci,
slice_num, num_udf, false);
bcm_sf2_cfp_slice_ipv4(priv, ipv4.mask, ports.mask, vlan_m_tci,
SLICE_NUM_MASK, num_udf, true);
/* Insert into TCAM now */
bcm_sf2_cfp_rule_addr_set(priv, rule_index);
ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
if (ret) {
pr_err("TCAM entry at addr %d failed\n", rule_index);
goto out_err_flow_rule;
}
/* Insert into Action and policer RAMs now */
ret = bcm_sf2_cfp_act_pol_set(priv, rule_index, port, port_num,
queue_num, true);
if (ret)
goto out_err_flow_rule;
/* Turn on CFP for this rule now */
reg = core_readl(priv, CORE_CFP_CTL_REG);
reg |= BIT(port);
core_writel(priv, reg, CORE_CFP_CTL_REG);
/* Flag the rule as being used and return it */
set_bit(rule_index, priv->cfp.used);
set_bit(rule_index, priv->cfp.unique);
fs->location = rule_index;
return 0;
out_err_flow_rule:
ethtool_rx_flow_rule_destroy(flow);
return ret;
}
static void bcm_sf2_cfp_slice_ipv6(struct bcm_sf2_priv *priv,
const __be32 *ip6_addr, const __be16 port,
const __be16 vlan_tci,
unsigned int slice_num, u32 udf_bits,
bool mask)
{
u32 reg, tmp, val, offset;
/* UDF_Valid[7:0] [31:24]
* S-Tag [23:8]
* C-Tag [7:0]
*/
reg = udf_bits << 24 | be16_to_cpu(vlan_tci) >> 8;
if (mask)
core_writel(priv, reg, CORE_CFP_MASK_PORT(5));
else
core_writel(priv, reg, CORE_CFP_DATA_PORT(5));
/* C-Tag [31:24]
* UDF_n_B8 [23:8] (port)
* UDF_n_B7 (upper) [7:0] (addr[15:8])
*/
reg = be32_to_cpu(ip6_addr[3]);
val = (u32)be16_to_cpu(port) << 8 | ((reg >> 8) & 0xff);
val |= (u32)(be16_to_cpu(vlan_tci) & 0xff) << 24;
if (mask)
offset = CORE_CFP_MASK_PORT(4);
else
offset = CORE_CFP_DATA_PORT(4);
core_writel(priv, val, offset);
/* UDF_n_B7 (lower) [31:24] (addr[7:0])
* UDF_n_B6 [23:8] (addr[31:16])
* UDF_n_B5 (upper) [7:0] (addr[47:40])
*/
tmp = be32_to_cpu(ip6_addr[2]);
val = (u32)(reg & 0xff) << 24 | (u32)(reg >> 16) << 8 |
((tmp >> 8) & 0xff);
if (mask)
offset = CORE_CFP_MASK_PORT(3);
else
offset = CORE_CFP_DATA_PORT(3);
core_writel(priv, val, offset);
/* UDF_n_B5 (lower) [31:24] (addr[39:32])
* UDF_n_B4 [23:8] (addr[63:48])
* UDF_n_B3 (upper) [7:0] (addr[79:72])
*/
reg = be32_to_cpu(ip6_addr[1]);
val = (u32)(tmp & 0xff) << 24 | (u32)(tmp >> 16) << 8 |
((reg >> 8) & 0xff);
if (mask)
offset = CORE_CFP_MASK_PORT(2);
else
offset = CORE_CFP_DATA_PORT(2);
core_writel(priv, val, offset);
/* UDF_n_B3 (lower) [31:24] (addr[71:64])
* UDF_n_B2 [23:8] (addr[95:80])
* UDF_n_B1 (upper) [7:0] (addr[111:104])
*/
tmp = be32_to_cpu(ip6_addr[0]);
val = (u32)(reg & 0xff) << 24 | (u32)(reg >> 16) << 8 |
((tmp >> 8) & 0xff);
if (mask)
offset = CORE_CFP_MASK_PORT(1);
else
offset = CORE_CFP_DATA_PORT(1);
core_writel(priv, val, offset);
/* UDF_n_B1 (lower) [31:24] (addr[103:96])
* UDF_n_B0 [23:8] (addr[127:112])
* Reserved [7:4]
* Slice ID [3:2]
* Slice valid [1:0]
*/
reg = (u32)(tmp & 0xff) << 24 | (u32)(tmp >> 16) << 8 |
SLICE_NUM(slice_num) | SLICE_VALID;
if (mask)
offset = CORE_CFP_MASK_PORT(0);
else
offset = CORE_CFP_DATA_PORT(0);
core_writel(priv, reg, offset);
}
static struct cfp_rule *bcm_sf2_cfp_rule_find(struct bcm_sf2_priv *priv,
int port, u32 location)
{
struct cfp_rule *rule;
list_for_each_entry(rule, &priv->cfp.rules_list, next) {
if (rule->port == port && rule->fs.location == location)
return rule;
}
return NULL;
}
static int bcm_sf2_cfp_rule_cmp(struct bcm_sf2_priv *priv, int port,
struct ethtool_rx_flow_spec *fs)
{
struct cfp_rule *rule = NULL;
size_t fs_size = 0;
int ret = 1;
if (list_empty(&priv->cfp.rules_list))
return ret;
list_for_each_entry(rule, &priv->cfp.rules_list, next) {
ret = 1;
if (rule->port != port)
continue;
if (rule->fs.flow_type != fs->flow_type ||
rule->fs.ring_cookie != fs->ring_cookie ||
rule->fs.h_ext.data[0] != fs->h_ext.data[0])
continue;
switch (fs->flow_type & ~FLOW_EXT) {
case TCP_V6_FLOW:
case UDP_V6_FLOW:
fs_size = sizeof(struct ethtool_tcpip6_spec);
break;
case TCP_V4_FLOW:
case UDP_V4_FLOW:
fs_size = sizeof(struct ethtool_tcpip4_spec);
break;
default:
continue;
}
ret = memcmp(&rule->fs.h_u, &fs->h_u, fs_size);
ret |= memcmp(&rule->fs.m_u, &fs->m_u, fs_size);
/* Compare VLAN TCI values as well */
if (rule->fs.flow_type & FLOW_EXT) {
ret |= rule->fs.h_ext.vlan_tci != fs->h_ext.vlan_tci;
ret |= rule->fs.m_ext.vlan_tci != fs->m_ext.vlan_tci;
}
if (ret == 0)
break;
}
return ret;
}
static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv *priv, int port,
unsigned int port_num,
unsigned int queue_num,
struct ethtool_rx_flow_spec *fs)
{
__be16 vlan_tci = 0, vlan_m_tci = htons(0xffff);
struct ethtool_rx_flow_spec_input input = {};
unsigned int slice_num, rule_index[2];
const struct cfp_udf_layout *layout;
struct ethtool_rx_flow_rule *flow;
struct flow_match_ipv6_addrs ipv6;
struct flow_match_ports ports;
u8 ip_proto, ip_frag;
int ret = 0;
u8 num_udf;
u32 reg;
switch (fs->flow_type & ~FLOW_EXT) {
case TCP_V6_FLOW:
ip_proto = IPPROTO_TCP;
break;
case UDP_V6_FLOW:
ip_proto = IPPROTO_UDP;
break;
default:
return -EINVAL;
}
ip_frag = !!(be32_to_cpu(fs->h_ext.data[0]) & 1);
/* Extract VLAN TCI */
if (fs->flow_type & FLOW_EXT) {
vlan_tci = fs->h_ext.vlan_tci;
vlan_m_tci = fs->m_ext.vlan_tci;
}
layout = &udf_tcpip6_layout;
slice_num = bcm_sf2_get_slice_number(layout, 0);
if (slice_num == UDF_NUM_SLICES)
return -EINVAL;
num_udf = bcm_sf2_get_num_udf_slices(layout->udfs[slice_num].slices);
/* Negotiate two indexes, one for the second half which we are chained
* from, which is what we will return to user-space, and a second one
* which is used to store its first half. That first half does not
* allow any choice of placement, so it just needs to find the next
* available bit. We return the second half as fs->location because
* that helps with the rule lookup later on since the second half is
* chained from its first half, we can easily identify IPv6 CFP rules
* by looking whether they carry a CHAIN_ID.
*
* We also want the second half to have a lower rule_index than its
* first half because the HW search is by incrementing addresses.
*/
if (fs->location == RX_CLS_LOC_ANY)
rule_index[1] = find_first_zero_bit(priv->cfp.used,
priv->num_cfp_rules);
else
rule_index[1] = fs->location;
if (rule_index[1] > bcm_sf2_cfp_rule_size(priv))
return -ENOSPC;
/* Flag it as used (cleared on error path) such that we can immediately
* obtain a second one to chain from.
*/
set_bit(rule_index[1], priv->cfp.used);
rule_index[0] = find_first_zero_bit(priv->cfp.used,
priv->num_cfp_rules);
if (rule_index[0] > bcm_sf2_cfp_rule_size(priv)) {
ret = -ENOSPC;
goto out_err;
}
input.fs = fs;
flow = ethtool_rx_flow_rule_create(&input);
if (IS_ERR(flow)) {
ret = PTR_ERR(flow);
goto out_err;
}
flow_rule_match_ipv6_addrs(flow->rule, &ipv6);
flow_rule_match_ports(flow->rule, &ports);
/* Apply the UDF layout for this filter */
bcm_sf2_cfp_udf_set(priv, layout, slice_num);
/* Apply to all packets received through this port */
core_writel(priv, BIT(port), CORE_CFP_DATA_PORT(7));
/* Source port map match */
core_writel(priv, 0xff, CORE_CFP_MASK_PORT(7));
/* S-Tag status [31:30]
* C-Tag status [29:28]
* L2 framing [27:26]
* L3 framing [25:24]
* IP ToS [23:16]
* IP proto [15:08]
* IP Fragm [7]
* Non 1st frag [6]
* IP Authen [5]
* TTL range [4:3]
* PPPoE session [2]
* Reserved [1]
* UDF_Valid[8] [0]
*/
reg = 1 << L3_FRAMING_SHIFT | ip_proto << IPPROTO_SHIFT |
ip_frag << IP_FRAG_SHIFT | udf_upper_bits(num_udf);
core_writel(priv, reg, CORE_CFP_DATA_PORT(6));
/* Mask with the specific layout for IPv6 packets including
* UDF_Valid[8]
*/
reg = layout->udfs[slice_num].mask_value | udf_upper_bits(num_udf);
core_writel(priv, reg, CORE_CFP_MASK_PORT(6));
/* Slice the IPv6 source address and port */
bcm_sf2_cfp_slice_ipv6(priv, ipv6.key->src.in6_u.u6_addr32,
ports.key->src, vlan_tci, slice_num,
udf_lower_bits(num_udf), false);
bcm_sf2_cfp_slice_ipv6(priv, ipv6.mask->src.in6_u.u6_addr32,
ports.mask->src, vlan_m_tci, SLICE_NUM_MASK,
udf_lower_bits(num_udf), true);
/* Insert into TCAM now because we need to insert a second rule */
bcm_sf2_cfp_rule_addr_set(priv, rule_index[0]);
ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
if (ret) {
pr_err("TCAM entry at addr %d failed\n", rule_index[0]);
goto out_err_flow_rule;
}
/* Insert into Action and policer RAMs now */
ret = bcm_sf2_cfp_act_pol_set(priv, rule_index[0], port, port_num,
queue_num, false);
if (ret)
goto out_err_flow_rule;
/* Now deal with the second slice to chain this rule */
slice_num = bcm_sf2_get_slice_number(layout, slice_num + 1);
if (slice_num == UDF_NUM_SLICES) {
ret = -EINVAL;
goto out_err_flow_rule;
}
num_udf = bcm_sf2_get_num_udf_slices(layout->udfs[slice_num].slices);
/* Apply the UDF layout for this filter */
bcm_sf2_cfp_udf_set(priv, layout, slice_num);
/* Chained rule, source port match is coming from the rule we are
* chained from.
*/
core_writel(priv, 0, CORE_CFP_DATA_PORT(7));
core_writel(priv, 0, CORE_CFP_MASK_PORT(7));
/*
* CHAIN ID [31:24] chain to previous slice
* Reserved [23:20]
* UDF_Valid[11:8] [19:16]
* UDF_Valid[7:0] [15:8]
* UDF_n_D11 [7:0]
*/
reg = rule_index[0] << 24 | udf_upper_bits(num_udf) << 16 |
udf_lower_bits(num_udf) << 8;
core_writel(priv, reg, CORE_CFP_DATA_PORT(6));
/* Mask all except chain ID, UDF Valid[8] and UDF Valid[7:0] */
reg = XCESS_ADDR_MASK << 24 | udf_upper_bits(num_udf) << 16 |
udf_lower_bits(num_udf) << 8;
core_writel(priv, reg, CORE_CFP_MASK_PORT(6));
bcm_sf2_cfp_slice_ipv6(priv, ipv6.key->dst.in6_u.u6_addr32,
ports.key->dst, 0, slice_num,
0, false);
bcm_sf2_cfp_slice_ipv6(priv, ipv6.mask->dst.in6_u.u6_addr32,
ports.key->dst, 0, SLICE_NUM_MASK,
0, true);
/* Insert into TCAM now */
bcm_sf2_cfp_rule_addr_set(priv, rule_index[1]);
ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
if (ret) {
pr_err("TCAM entry at addr %d failed\n", rule_index[1]);
goto out_err_flow_rule;
}
/* Insert into Action and policer RAMs now, set chain ID to
* the one we are chained to
*/
ret = bcm_sf2_cfp_act_pol_set(priv, rule_index[1], port, port_num,
queue_num, true);
if (ret)
goto out_err_flow_rule;
/* Turn on CFP for this rule now */
reg = core_readl(priv, CORE_CFP_CTL_REG);
reg |= BIT(port);
core_writel(priv, reg, CORE_CFP_CTL_REG);
/* Flag the second half rule as being used now, return it as the
* location, and flag it as unique while dumping rules
*/
set_bit(rule_index[0], priv->cfp.used);
set_bit(rule_index[1], priv->cfp.unique);
fs->location = rule_index[1];
return ret;
out_err_flow_rule:
ethtool_rx_flow_rule_destroy(flow);
out_err:
clear_bit(rule_index[1], priv->cfp.used);
return ret;
}
static int bcm_sf2_cfp_rule_insert(struct dsa_switch *ds, int port,
struct ethtool_rx_flow_spec *fs)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
__u64 ring_cookie = fs->ring_cookie;
struct switchdev_obj_port_vlan vlan;
unsigned int queue_num, port_num;
u16 vid;
int ret;
/* This rule is a Wake-on-LAN filter and we must specifically
* target the CPU port in order for it to be working.
*/
if (ring_cookie == RX_CLS_FLOW_WAKE)
ring_cookie = cpu_port * SF2_NUM_EGRESS_QUEUES;
/* We do not support discarding packets, check that the
* destination port is enabled and that we are within the
* number of ports supported by the switch
*/
port_num = ring_cookie / SF2_NUM_EGRESS_QUEUES;
if (ring_cookie == RX_CLS_FLOW_DISC ||
!(dsa_is_user_port(ds, port_num) ||
dsa_is_cpu_port(ds, port_num)) ||
port_num >= priv->hw_params.num_ports)
return -EINVAL;
/* If the rule is matching a particular VLAN, make sure that we honor
* the matching and have it tagged or untagged on the destination port,
* we do this on egress with a VLAN entry. The egress tagging attribute
* is expected to be provided in h_ext.data[1] bit 0. A 1 means untagged,
* a 0 means tagged.
*/
if (fs->flow_type & FLOW_EXT) {
/* We cannot support matching multiple VLAN IDs yet */
if ((be16_to_cpu(fs->m_ext.vlan_tci) & VLAN_VID_MASK) !=
VLAN_VID_MASK)
return -EINVAL;
vid = be16_to_cpu(fs->h_ext.vlan_tci) & VLAN_VID_MASK;
net: switchdev: remove vid_begin -> vid_end range from VLAN objects The call path of a switchdev VLAN addition to the bridge looks something like this today: nbp_vlan_init | __br_vlan_set_default_pvid | | | | | br_afspec | | | | | | | v | | | br_process_vlan_info | | | | | | | v | | | br_vlan_info | | | / \ / | | / \ / | | / \ / | | / \ / v v v v v nbp_vlan_add br_vlan_add ------+ | ^ ^ | | | / | | | | / / / | \ br_vlan_get_master/ / v \ ^ / / br_vlan_add_existing \ | / / | \ | / / / \ | / / / \ | / / / \ | / / / v | | v / __vlan_add / / | / / | / v | / __vlan_vid_add | / \ | / v v v br_switchdev_port_vlan_add The ranges UAPI was introduced to the bridge in commit bdced7ef7838 ("bridge: support for multiple vlans and vlan ranges in setlink and dellink requests") (Jan 10 2015). But the VLAN ranges (parsed in br_afspec) have always been passed one by one, through struct bridge_vlan_info tmp_vinfo, to br_vlan_info. So the range never went too far in depth. Then Scott Feldman introduced the switchdev_port_bridge_setlink function in commit 47f8328bb1a4 ("switchdev: add new switchdev bridge setlink"). That marked the introduction of the SWITCHDEV_OBJ_PORT_VLAN, which made full use of the range. But switchdev_port_bridge_setlink was called like this: br_setlink -> br_afspec -> switchdev_port_bridge_setlink Basically, the switchdev and the bridge code were not tightly integrated. Then commit 41c498b9359e ("bridge: restore br_setlink back to original") came, and switchdev drivers were required to implement .ndo_bridge_setlink = switchdev_port_bridge_setlink for a while. In the meantime, commits such as 0944d6b5a2fa ("bridge: try switchdev op first in __vlan_vid_add/del") finally made switchdev penetrate the br_vlan_info() barrier and start to develop the call path we have today. But remember, br_vlan_info() still receives VLANs one by one. Then Arkadi Sharshevsky refactored the switchdev API in 2017 in commit 29ab586c3d83 ("net: switchdev: Remove bridge bypass support from switchdev") so that drivers would not implement .ndo_bridge_setlink any longer. The switchdev_port_bridge_setlink also got deleted. This refactoring removed the parallel bridge_setlink implementation from switchdev, and left the only switchdev VLAN objects to be the ones offloaded from __vlan_vid_add (basically RX filtering) and __vlan_add (the latter coming from commit 9c86ce2c1ae3 ("net: bridge: Notify about bridge VLANs")). That is to say, today the switchdev VLAN object ranges are not used in the kernel. Refactoring the above call path is a bit complicated, when the bridge VLAN call path is already a bit complicated. Let's go off and finish the job of commit 29ab586c3d83 by deleting the bogus iteration through the VLAN ranges from the drivers. Some aspects of this feature never made too much sense in the first place. For example, what is a range of VLANs all having the BRIDGE_VLAN_INFO_PVID flag supposed to mean, when a port can obviously have a single pvid? This particular configuration _is_ denied as of commit 6623c60dc28e ("bridge: vlan: enforce no pvid flag in vlan ranges"), but from an API perspective, the driver still has to play pretend, and only offload the vlan->vid_end as pvid. And the addition of a switchdev VLAN object can modify the flags of another, completely unrelated, switchdev VLAN object! (a VLAN that is PVID will invalidate the PVID flag from whatever other VLAN had previously been offloaded with switchdev and had that flag. Yet switchdev never notifies about that change, drivers are supposed to guess). Nonetheless, having a VLAN range in the API makes error handling look scarier than it really is - unwinding on errors and all of that. When in reality, no one really calls this API with more than one VLAN. It is all unnecessary complexity. And despite appearing pretentious (two-phase transactional model and all), the switchdev API is really sloppy because the VLAN addition and removal operations are not paired with one another (you can add a VLAN 100 times and delete it just once). The bridge notifies through switchdev of a VLAN addition not only when the flags of an existing VLAN change, but also when nothing changes. There are switchdev drivers out there who don't like adding a VLAN that has already been added, and those checks don't really belong at driver level. But the fact that the API contains ranges is yet another factor that prevents this from being addressed in the future. Of the existing switchdev pieces of hardware, it appears that only Mellanox Spectrum supports offloading more than one VLAN at a time, through mlxsw_sp_port_vlan_set. I have kept that code internal to the driver, because there is some more bookkeeping that makes use of it, but I deleted it from the switchdev API. But since the switchdev support for ranges has already been de facto deleted by a Mellanox employee and nobody noticed for 4 years, I'm going to assume it's not a biggie. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> # switchdev and mlxsw Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:46 +00:00
vlan.vid = vid;
if (be32_to_cpu(fs->h_ext.data[1]) & 1)
vlan.flags = BRIDGE_VLAN_INFO_UNTAGGED;
else
vlan.flags = 0;
ret = ds->ops->port_vlan_add(ds, port_num, &vlan, NULL);
if (ret)
return ret;
}
/*
* We have a small oddity where Port 6 just does not have a
* valid bit here (so we substract by one).
*/
queue_num = ring_cookie % SF2_NUM_EGRESS_QUEUES;
if (port_num >= 7)
port_num -= 1;
switch (fs->flow_type & ~FLOW_EXT) {
case TCP_V4_FLOW:
case UDP_V4_FLOW:
ret = bcm_sf2_cfp_ipv4_rule_set(priv, port, port_num,
queue_num, fs);
break;
case TCP_V6_FLOW:
case UDP_V6_FLOW:
ret = bcm_sf2_cfp_ipv6_rule_set(priv, port, port_num,
queue_num, fs);
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port,
struct ethtool_rx_flow_spec *fs)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
struct cfp_rule *rule = NULL;
int ret = -EINVAL;
/* Check for unsupported extensions */
if (fs->flow_type & FLOW_MAC_EXT)
return -EINVAL;
if (fs->location != RX_CLS_LOC_ANY &&
fs->location > bcm_sf2_cfp_rule_size(priv))
return -EINVAL;
if ((fs->flow_type & FLOW_EXT) &&
net: dsa: remove the transactional logic from VLAN objects It should be the driver's business to logically separate its VLAN offloading into a preparation and a commit phase, and some drivers don't need / can't do this. So remove the transactional shim from DSA and let drivers propagate errors directly from the .port_vlan_add callback. It would appear that the code has worse error handling now than it had before. DSA is the only in-kernel user of switchdev that offloads one switchdev object to more than one port: for every VLAN object offloaded to a user port, that VLAN is also offloaded to the CPU port. So the "prepare for user port -> check for errors -> prepare for CPU port -> check for errors -> commit for user port -> commit for CPU port" sequence appears to make more sense than the one we are using now: "offload to user port -> check for errors -> offload to CPU port -> check for errors", but it is really a compromise. In the new way, we can catch errors from the commit phase that we previously had to ignore. But we have our hands tied and cannot do any rollback now: if we add a VLAN on the CPU port and it fails, we can't do the rollback by simply deleting it from the user port, because the switchdev API is not so nice with us: it could have simply been there already, even with the same flags. So we don't even attempt to rollback anything on addition error, just leave whatever VLANs managed to get offloaded right where they are. This should not be a problem at all in practice. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:53 +00:00
!(ds->ops->port_vlan_add || ds->ops->port_vlan_del))
return -EOPNOTSUPP;
if (fs->location != RX_CLS_LOC_ANY &&
test_bit(fs->location, priv->cfp.used))
return -EBUSY;
ret = bcm_sf2_cfp_rule_cmp(priv, port, fs);
if (ret == 0)
return -EEXIST;
rule = kzalloc(sizeof(*rule), GFP_KERNEL);
if (!rule)
return -ENOMEM;
ret = bcm_sf2_cfp_rule_insert(ds, port, fs);
if (ret) {
kfree(rule);
return ret;
}
rule->port = port;
memcpy(&rule->fs, fs, sizeof(*fs));
list_add_tail(&rule->next, &priv->cfp.rules_list);
return ret;
}
static int bcm_sf2_cfp_rule_del_one(struct bcm_sf2_priv *priv, int port,
u32 loc, u32 *next_loc)
{
int ret;
u32 reg;
/* Indicate which rule we want to read */
bcm_sf2_cfp_rule_addr_set(priv, loc);
ret = bcm_sf2_cfp_op(priv, OP_SEL_READ | TCAM_SEL);
if (ret)
return ret;
/* Check if this is possibly an IPv6 rule that would
* indicate we need to delete its companion rule
* as well
*/
reg = core_readl(priv, CORE_CFP_DATA_PORT(6));
if (next_loc)
*next_loc = (reg >> 24) & CHAIN_ID_MASK;
/* Clear its valid bits */
reg = core_readl(priv, CORE_CFP_DATA_PORT(0));
reg &= ~SLICE_VALID;
core_writel(priv, reg, CORE_CFP_DATA_PORT(0));
/* Write back this entry into the TCAM now */
ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
if (ret)
return ret;
clear_bit(loc, priv->cfp.used);
clear_bit(loc, priv->cfp.unique);
return 0;
}
static int bcm_sf2_cfp_rule_remove(struct bcm_sf2_priv *priv, int port,
u32 loc)
{
u32 next_loc = 0;
int ret;
ret = bcm_sf2_cfp_rule_del_one(priv, port, loc, &next_loc);
if (ret)
return ret;
/* If this was an IPv6 rule, delete is companion rule too */
if (next_loc)
ret = bcm_sf2_cfp_rule_del_one(priv, port, next_loc, NULL);
return ret;
}
static int bcm_sf2_cfp_rule_del(struct bcm_sf2_priv *priv, int port, u32 loc)
{
struct cfp_rule *rule;
int ret;
if (loc > bcm_sf2_cfp_rule_size(priv))
return -EINVAL;
/* Refuse deleting unused rules, and those that are not unique since
* that could leave IPv6 rules with one of the chained rule in the
* table.
*/
if (!test_bit(loc, priv->cfp.unique) || loc == 0)
return -EINVAL;
rule = bcm_sf2_cfp_rule_find(priv, port, loc);
if (!rule)
return -EINVAL;
ret = bcm_sf2_cfp_rule_remove(priv, port, loc);
list_del(&rule->next);
kfree(rule);
return ret;
}
static void bcm_sf2_invert_masks(struct ethtool_rx_flow_spec *flow)
{
unsigned int i;
for (i = 0; i < sizeof(flow->m_u); i++)
flow->m_u.hdata[i] ^= 0xff;
flow->m_ext.vlan_etype ^= cpu_to_be16(~0);
flow->m_ext.vlan_tci ^= cpu_to_be16(~0);
flow->m_ext.data[0] ^= cpu_to_be32(~0);
flow->m_ext.data[1] ^= cpu_to_be32(~0);
}
static int bcm_sf2_cfp_rule_get(struct bcm_sf2_priv *priv, int port,
struct ethtool_rxnfc *nfc)
{
struct cfp_rule *rule;
rule = bcm_sf2_cfp_rule_find(priv, port, nfc->fs.location);
if (!rule)
return -EINVAL;
memcpy(&nfc->fs, &rule->fs, sizeof(rule->fs));
bcm_sf2_invert_masks(&nfc->fs);
/* Put the TCAM size here */
nfc->data = bcm_sf2_cfp_rule_size(priv);
return 0;
}
/* We implement the search doing a TCAM search operation */
static int bcm_sf2_cfp_rule_get_all(struct bcm_sf2_priv *priv,
int port, struct ethtool_rxnfc *nfc,
u32 *rule_locs)
{
unsigned int index = 1, rules_cnt = 0;
for_each_set_bit_from(index, priv->cfp.unique, priv->num_cfp_rules) {
rule_locs[rules_cnt] = index;
rules_cnt++;
}
/* Put the TCAM size here */
nfc->data = bcm_sf2_cfp_rule_size(priv);
nfc->rule_cnt = rules_cnt;
return 0;
}
int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port,
struct ethtool_rxnfc *nfc, u32 *rule_locs)
{
struct net_device *p = dsa_port_to_master(dsa_to_port(ds, port));
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
int ret = 0;
mutex_lock(&priv->cfp.lock);
switch (nfc->cmd) {
case ETHTOOL_GRXCLSRLCNT:
/* Subtract the default, unusable rule */
nfc->rule_cnt = bitmap_weight(priv->cfp.unique,
priv->num_cfp_rules) - 1;
/* We support specifying rule locations */
nfc->data |= RX_CLS_LOC_SPECIAL;
break;
case ETHTOOL_GRXCLSRULE:
ret = bcm_sf2_cfp_rule_get(priv, port, nfc);
break;
case ETHTOOL_GRXCLSRLALL:
ret = bcm_sf2_cfp_rule_get_all(priv, port, nfc, rule_locs);
break;
default:
ret = -EOPNOTSUPP;
break;
}
mutex_unlock(&priv->cfp.lock);
if (ret)
return ret;
/* Pass up the commands to the attached master network device */
if (p->ethtool_ops->get_rxnfc) {
ret = p->ethtool_ops->get_rxnfc(p, nfc, rule_locs);
if (ret == -EOPNOTSUPP)
ret = 0;
}
return ret;
}
int bcm_sf2_set_rxnfc(struct dsa_switch *ds, int port,
struct ethtool_rxnfc *nfc)
{
struct net_device *p = dsa_port_to_master(dsa_to_port(ds, port));
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
int ret = 0;
mutex_lock(&priv->cfp.lock);
switch (nfc->cmd) {
case ETHTOOL_SRXCLSRLINS:
ret = bcm_sf2_cfp_rule_set(ds, port, &nfc->fs);
break;
case ETHTOOL_SRXCLSRLDEL:
ret = bcm_sf2_cfp_rule_del(priv, port, nfc->fs.location);
break;
default:
ret = -EOPNOTSUPP;
break;
}
mutex_unlock(&priv->cfp.lock);
if (ret)
return ret;
/* Pass up the commands to the attached master network device.
* This can fail, so rollback the operation if we need to.
*/
if (p->ethtool_ops->set_rxnfc) {
ret = p->ethtool_ops->set_rxnfc(p, nfc);
if (ret && ret != -EOPNOTSUPP) {
mutex_lock(&priv->cfp.lock);
bcm_sf2_cfp_rule_del(priv, port, nfc->fs.location);
mutex_unlock(&priv->cfp.lock);
} else {
ret = 0;
}
}
return ret;
}
int bcm_sf2_cfp_rst(struct bcm_sf2_priv *priv)
{
unsigned int timeout = 1000;
u32 reg;
reg = core_readl(priv, CORE_CFP_ACC);
reg |= TCAM_RESET;
core_writel(priv, reg, CORE_CFP_ACC);
do {
reg = core_readl(priv, CORE_CFP_ACC);
if (!(reg & TCAM_RESET))
break;
cpu_relax();
} while (timeout--);
if (!timeout)
return -ETIMEDOUT;
return 0;
}
void bcm_sf2_cfp_exit(struct dsa_switch *ds)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
struct cfp_rule *rule, *n;
if (list_empty(&priv->cfp.rules_list))
return;
list_for_each_entry_safe_reverse(rule, n, &priv->cfp.rules_list, next)
bcm_sf2_cfp_rule_del(priv, rule->port, rule->fs.location);
}
int bcm_sf2_cfp_resume(struct dsa_switch *ds)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
struct cfp_rule *rule;
int ret = 0;
u32 reg;
if (list_empty(&priv->cfp.rules_list))
return ret;
reg = core_readl(priv, CORE_CFP_CTL_REG);
reg &= ~CFP_EN_MAP_MASK;
core_writel(priv, reg, CORE_CFP_CTL_REG);
ret = bcm_sf2_cfp_rst(priv);
if (ret)
return ret;
list_for_each_entry(rule, &priv->cfp.rules_list, next) {
ret = bcm_sf2_cfp_rule_remove(priv, rule->port,
rule->fs.location);
if (ret) {
dev_err(ds->dev, "failed to remove rule\n");
return ret;
}
ret = bcm_sf2_cfp_rule_insert(ds, rule->port, &rule->fs);
if (ret) {
dev_err(ds->dev, "failed to restore rule\n");
return ret;
}
}
return ret;
}
static const struct bcm_sf2_cfp_stat {
unsigned int offset;
unsigned int ram_loc;
const char *name;
} bcm_sf2_cfp_stats[] = {
{
.offset = CORE_STAT_GREEN_CNTR,
.ram_loc = GREEN_STAT_RAM,
.name = "Green"
},
{
.offset = CORE_STAT_YELLOW_CNTR,
.ram_loc = YELLOW_STAT_RAM,
.name = "Yellow"
},
{
.offset = CORE_STAT_RED_CNTR,
.ram_loc = RED_STAT_RAM,
.name = "Red"
},
};
void bcm_sf2_cfp_get_strings(struct dsa_switch *ds, int port,
u32 stringset, uint8_t *data)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
unsigned int s = ARRAY_SIZE(bcm_sf2_cfp_stats);
char buf[ETH_GSTRING_LEN];
unsigned int i, j, iter;
if (stringset != ETH_SS_STATS)
return;
for (i = 1; i < priv->num_cfp_rules; i++) {
for (j = 0; j < s; j++) {
snprintf(buf, sizeof(buf),
"CFP%03d_%sCntr",
i, bcm_sf2_cfp_stats[j].name);
iter = (i - 1) * s + j;
strscpy(data + iter * ETH_GSTRING_LEN,
buf, ETH_GSTRING_LEN);
}
}
}
void bcm_sf2_cfp_get_ethtool_stats(struct dsa_switch *ds, int port,
uint64_t *data)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
unsigned int s = ARRAY_SIZE(bcm_sf2_cfp_stats);
const struct bcm_sf2_cfp_stat *stat;
unsigned int i, j, iter;
struct cfp_rule *rule;
int ret;
mutex_lock(&priv->cfp.lock);
for (i = 1; i < priv->num_cfp_rules; i++) {
rule = bcm_sf2_cfp_rule_find(priv, port, i);
if (!rule)
continue;
for (j = 0; j < s; j++) {
stat = &bcm_sf2_cfp_stats[j];
bcm_sf2_cfp_rule_addr_set(priv, i);
ret = bcm_sf2_cfp_op(priv, stat->ram_loc | OP_SEL_READ);
if (ret)
continue;
iter = (i - 1) * s + j;
data[iter] = core_readl(priv, stat->offset);
}
}
mutex_unlock(&priv->cfp.lock);
}
int bcm_sf2_cfp_get_sset_count(struct dsa_switch *ds, int port, int sset)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
if (sset != ETH_SS_STATS)
return 0;
/* 3 counters per CFP rules */
return (priv->num_cfp_rules - 1) * ARRAY_SIZE(bcm_sf2_cfp_stats);
}