linux-stable/include/sound/core.h

519 lines
16 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-or-later */
#ifndef __SOUND_CORE_H
#define __SOUND_CORE_H
/*
* Main header file for the ALSA driver
* Copyright (c) 1994-2001 by Jaroslav Kysela <perex@perex.cz>
*/
#include <linux/device.h>
#include <linux/sched.h> /* wake_up() */
#include <linux/mutex.h> /* struct mutex */
#include <linux/rwsem.h> /* struct rw_semaphore */
#include <linux/pm.h> /* pm_message_t */
#include <linux/stringify.h>
#include <linux/printk.h>
ALSA: control: Use xarray for faster lookups The control elements are managed in a single linked list and we traverse the whole list for matching each numid or ctl id per every inquiry of a control element. This is OK-ish for a small number of elements but obviously it doesn't scale. Especially the matching with the ctl id takes time because it checks each field of the snd_ctl_id element, e.g. the name string is matched with strcmp(). This patch adds the hash tables with Xarray for improving the lookup speed of a control element. There are two xarray tables added to the card; one for numid and another for ctl id. For the numid, we use the numid as the index, while for the ctl id, we calculate a hash key. The lookup is done via a single xa_load() execution. As long as the given control element is found on the Xarray table, that's fine, we can give back a quick lookup result. The problem is when no entry hits on the table, and for this case, we have a slight optimization. Namely, the driver checks whether we had a collision on Xarray table, and do a fallback search (linear lookup of the full entries) only if a hash key collision happened beforehand. So, in theory, the inquiry for a non-existing element might take still time even with this patch in a worst case, but this must be pretty rare. The feature is enabled via CONFIG_SND_CTL_FAST_LOOKUP, which is turned on as default. For simplicity, the option can be turned off only when CONFIG_EXPERT is set ("You are expert? Then you manage 1000 knobs"). Link: https://lore.kernel.org/r/20211028130027.18764-1-tiwai@suse.de Link: https://lore.kernel.org/r/20220609180504.775-1-tiwai@suse.de Link: https://lore.kernel.org/all/cover.1653813866.git.quic_rbankapu@quicinc.com/ Link: https://lore.kernel.org/r/20220610064537.18660-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-06-10 06:45:37 +00:00
#include <linux/xarray.h>
/* number of supported soundcards */
#ifdef CONFIG_SND_DYNAMIC_MINORS
#define SNDRV_CARDS CONFIG_SND_MAX_CARDS
#else
#define SNDRV_CARDS 8 /* don't change - minor numbers */
#endif
#define CONFIG_SND_MAJOR 116 /* standard configuration */
/* forward declarations */
struct pci_dev;
struct module;
struct completion;
/* device allocation stuff */
/* type of the object used in snd_device_*()
* this also defines the calling order
*/
enum snd_device_type {
SNDRV_DEV_LOWLEVEL,
SNDRV_DEV_INFO,
SNDRV_DEV_BUS,
SNDRV_DEV_CODEC,
SNDRV_DEV_PCM,
SNDRV_DEV_COMPRESS,
SNDRV_DEV_RAWMIDI,
SNDRV_DEV_TIMER,
SNDRV_DEV_SEQUENCER,
SNDRV_DEV_HWDEP,
SNDRV_DEV_JACK,
SNDRV_DEV_CONTROL, /* NOTE: this must be the last one */
};
enum snd_device_state {
SNDRV_DEV_BUILD,
SNDRV_DEV_REGISTERED,
SNDRV_DEV_DISCONNECTED,
};
struct snd_device;
struct snd_device_ops {
int (*dev_free)(struct snd_device *dev);
int (*dev_register)(struct snd_device *dev);
int (*dev_disconnect)(struct snd_device *dev);
};
struct snd_device {
struct list_head list; /* list of registered devices */
struct snd_card *card; /* card which holds this device */
enum snd_device_state state; /* state of the device */
enum snd_device_type type; /* device type */
void *device_data; /* device structure */
const struct snd_device_ops *ops; /* operations */
};
#define snd_device(n) list_entry(n, struct snd_device, list)
/* main structure for soundcard */
struct snd_card {
int number; /* number of soundcard (index to
snd_cards) */
char id[16]; /* id string of this card */
char driver[16]; /* driver name */
char shortname[32]; /* short name of this soundcard */
char longname[80]; /* name of this soundcard */
char irq_descr[32]; /* Interrupt description */
char mixername[80]; /* mixer name */
char components[128]; /* card components delimited with
space */
struct module *module; /* top-level module */
void *private_data; /* private data for soundcard */
void (*private_free) (struct snd_card *card); /* callback for freeing of
private data */
struct list_head devices; /* devices */
struct device ctl_dev; /* control device */
unsigned int last_numid; /* last used numeric ID */
struct rw_semaphore controls_rwsem; /* controls list lock */
rwlock_t ctl_files_rwlock; /* ctl_files list lock */
int controls_count; /* count of all controls */
ALSA: control: Add memory consumption limit to user controls ALSA control interface allows users to add arbitrary control elements (called "user controls" or "user elements"), and its resource usage is limited just by the max number of control sets (currently 32). This limit, however, is quite loose: each allocation of control set may have 1028 elements, and each element may have up to 512 bytes (ILP32) or 1024 bytes (LP64) of value data. Moreover, each control set may contain the enum strings and TLV data, which can be up to 64kB and 128kB, respectively. Totally, the whole memory consumption may go over 38MB -- it's quite large, and we'd rather like to reduce the size. OTOH, there have been other requests even to increase the max number of user elements; e.g. ALSA firewire stack require the more user controls, hence we want to raise the bar, too. For satisfying both requirements, this patch changes the management of user controls: instead of setting the upper limit of the number of user controls, we check the actual memory allocation size and set the upper limit of the total allocation in bytes. As long as the memory consumption stays below the limit, more user controls are allowed than the current limit 32. At the same time, we set the lower limit (8MB) as default than the current theoretical limit, in order to lower the risk of DoS. As a compromise for lowering the default limit, now the actual memory limit is defined as a module option, 'max_user_ctl_alloc_size', so that user can increase/decrease the limit if really needed, too. Link: https://lore.kernel.org/r/s5htur3zl5e.wl-tiwai@suse.de Co-developed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210408103149.40357-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-04-08 10:31:49 +00:00
size_t user_ctl_alloc_size; // current memory allocation by user controls.
struct list_head controls; /* all controls for this card */
struct list_head ctl_files; /* active control files */
ALSA: control: Use xarray for faster lookups The control elements are managed in a single linked list and we traverse the whole list for matching each numid or ctl id per every inquiry of a control element. This is OK-ish for a small number of elements but obviously it doesn't scale. Especially the matching with the ctl id takes time because it checks each field of the snd_ctl_id element, e.g. the name string is matched with strcmp(). This patch adds the hash tables with Xarray for improving the lookup speed of a control element. There are two xarray tables added to the card; one for numid and another for ctl id. For the numid, we use the numid as the index, while for the ctl id, we calculate a hash key. The lookup is done via a single xa_load() execution. As long as the given control element is found on the Xarray table, that's fine, we can give back a quick lookup result. The problem is when no entry hits on the table, and for this case, we have a slight optimization. Namely, the driver checks whether we had a collision on Xarray table, and do a fallback search (linear lookup of the full entries) only if a hash key collision happened beforehand. So, in theory, the inquiry for a non-existing element might take still time even with this patch in a worst case, but this must be pretty rare. The feature is enabled via CONFIG_SND_CTL_FAST_LOOKUP, which is turned on as default. For simplicity, the option can be turned off only when CONFIG_EXPERT is set ("You are expert? Then you manage 1000 knobs"). Link: https://lore.kernel.org/r/20211028130027.18764-1-tiwai@suse.de Link: https://lore.kernel.org/r/20220609180504.775-1-tiwai@suse.de Link: https://lore.kernel.org/all/cover.1653813866.git.quic_rbankapu@quicinc.com/ Link: https://lore.kernel.org/r/20220610064537.18660-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-06-10 06:45:37 +00:00
#ifdef CONFIG_SND_CTL_FAST_LOOKUP
struct xarray ctl_numids; /* hash table for numids */
struct xarray ctl_hash; /* hash table for ctl id matching */
bool ctl_hash_collision; /* ctl_hash collision seen? */
#endif
struct snd_info_entry *proc_root; /* root for soundcard specific files */
struct proc_dir_entry *proc_root_link; /* number link to real id */
struct list_head files_list; /* all files associated to this card */
struct snd_shutdown_f_ops *s_f_ops; /* file operations in the shutdown
state */
spinlock_t files_lock; /* lock the files for this card */
int shutdown; /* this card is going down */
struct completion *release_completion;
struct device *dev; /* device assigned to this card */
struct device card_dev; /* cardX object for sysfs */
const struct attribute_group *dev_groups[4]; /* assigned sysfs attr */
bool registered; /* card_dev is registered? */
2021-07-15 07:58:24 +00:00
bool managed; /* managed via devres */
bool releasing; /* during card free process */
int sync_irq; /* assigned irq, used for PCM sync */
ALSA: add snd_card_disconnect_sync() In case of user unbind ALSA driver during playing back / capturing, each driver needs to stop and remove it correctly. One note here is that we can't cancel from remove function in such case, because unbind operation doesn't check return value from remove function. So, we *must* stop and remove in this case. For this purpose, we need to sync (= wait) until the all top-level operations are canceled at remove function. For example, snd_card_free() processes the disconnection procedure at first, then waits for the completion. That's how the hot-unplug works safely. It's implemented, at least, in the top-level driver removal. Now for the lower level driver, we need a similar strategy. Notify to the toplevel for hot-unplug (disconnect in ALSA), and sync with the stop operation, then continue the rest of its own remove procedure. This patch adds snd_card_disconnect_sync(), and driver can use it from remove function. Note: the "lower level" driver here refers to a middle layer driver (e.g. ASoC components) that can be unbound freely during operation. Most of legacy ALSA helper drivers don't have such a problem because they can't be unbound. Note#2: snd_card_disconnect_sync() merely calls snd_card_disconnect() and syncs with closing all pending files. It takes only the files opened by user-space into account, and doesn't care about object refcounts. (The latter is handled by snd_card_free() completion call, BTW.) Also, the function doesn't free resources by itself. Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-11 06:36:13 +00:00
wait_queue_head_t remove_sleep;
size_t total_pcm_alloc_bytes; /* total amount of allocated buffers */
struct mutex memory_mutex; /* protection for the above */
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 08:56:39 +00:00
#ifdef CONFIG_SND_DEBUG
struct dentry *debugfs_root; /* debugfs root for card */
#endif
#ifdef CONFIG_PM
unsigned int power_state; /* power state */
ALSA: control: Track in-flight control read/write/tlv accesses Although the power state check is performed in various places (e.g. at the entrance of quite a few ioctls), there can be still some pending tasks that already went into the ioctl handler or other ops, and those may access the hardware even after the power state check. For example, kcontrol access ioctl paths that call info/get/put callbacks may update the hardware registers. If a system wants to assure the free from such hw access (like the case of PCI rescan feature we're going to implement in future), this situation must be avoided, and we have to sync such in-flight tasks finishing beforehand. For that purpose, this patch introduces a few new things in core code: - A refcount, power_ref, and a wait queue, power_ref_sleep, to the card object - A few new helpers, snd_power_ref(), snd_power_unref(), snd_power_ref_and_wait(), and snd_power_sync_ref() In the code paths that call kctl info/read/write/tlv ops, we check the power state with the newly introduced snd_power_ref_and_wait(). This function also takes the card.power_ref refcount for tracking this in-flight task. Once after the access finishes, snd_power_unref() is called to released the refcount in return. So the driver can sync via snd_power_sync_ref() assuring that all in-flight tasks have been finished. As of this patch, snd_power_sync_ref() is called only at snd_card_disconnect(), but it'll be used in other places in future. Note that atomic_t is used for power_ref intentionally instead of refcount_t. It's because of the design of refcount_t type; refcount_t cannot be zero-based, and it cannot do dec_and_test() call for multiple times, hence it's not suitable for our purpose. Also, this patch changes snd_power_wait() to accept only SNDRV_CTL_POWER_D0, which is the only value that makes sense. In later patch, the snd_power_wait() calls will be cleaned up. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20210523090920.15345-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-23 09:09:16 +00:00
atomic_t power_ref;
wait_queue_head_t power_sleep;
ALSA: control: Track in-flight control read/write/tlv accesses Although the power state check is performed in various places (e.g. at the entrance of quite a few ioctls), there can be still some pending tasks that already went into the ioctl handler or other ops, and those may access the hardware even after the power state check. For example, kcontrol access ioctl paths that call info/get/put callbacks may update the hardware registers. If a system wants to assure the free from such hw access (like the case of PCI rescan feature we're going to implement in future), this situation must be avoided, and we have to sync such in-flight tasks finishing beforehand. For that purpose, this patch introduces a few new things in core code: - A refcount, power_ref, and a wait queue, power_ref_sleep, to the card object - A few new helpers, snd_power_ref(), snd_power_unref(), snd_power_ref_and_wait(), and snd_power_sync_ref() In the code paths that call kctl info/read/write/tlv ops, we check the power state with the newly introduced snd_power_ref_and_wait(). This function also takes the card.power_ref refcount for tracking this in-flight task. Once after the access finishes, snd_power_unref() is called to released the refcount in return. So the driver can sync via snd_power_sync_ref() assuring that all in-flight tasks have been finished. As of this patch, snd_power_sync_ref() is called only at snd_card_disconnect(), but it'll be used in other places in future. Note that atomic_t is used for power_ref intentionally instead of refcount_t. It's because of the design of refcount_t type; refcount_t cannot be zero-based, and it cannot do dec_and_test() call for multiple times, hence it's not suitable for our purpose. Also, this patch changes snd_power_wait() to accept only SNDRV_CTL_POWER_D0, which is the only value that makes sense. In later patch, the snd_power_wait() calls will be cleaned up. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20210523090920.15345-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-23 09:09:16 +00:00
wait_queue_head_t power_ref_sleep;
#endif
#if IS_ENABLED(CONFIG_SND_MIXER_OSS)
struct snd_mixer_oss *mixer_oss;
int mixer_oss_change_count;
#endif
};
#define dev_to_snd_card(p) container_of(p, struct snd_card, card_dev)
#ifdef CONFIG_PM
static inline unsigned int snd_power_get_state(struct snd_card *card)
{
return READ_ONCE(card->power_state);
}
static inline void snd_power_change_state(struct snd_card *card, unsigned int state)
{
WRITE_ONCE(card->power_state, state);
wake_up(&card->power_sleep);
}
ALSA: control: Track in-flight control read/write/tlv accesses Although the power state check is performed in various places (e.g. at the entrance of quite a few ioctls), there can be still some pending tasks that already went into the ioctl handler or other ops, and those may access the hardware even after the power state check. For example, kcontrol access ioctl paths that call info/get/put callbacks may update the hardware registers. If a system wants to assure the free from such hw access (like the case of PCI rescan feature we're going to implement in future), this situation must be avoided, and we have to sync such in-flight tasks finishing beforehand. For that purpose, this patch introduces a few new things in core code: - A refcount, power_ref, and a wait queue, power_ref_sleep, to the card object - A few new helpers, snd_power_ref(), snd_power_unref(), snd_power_ref_and_wait(), and snd_power_sync_ref() In the code paths that call kctl info/read/write/tlv ops, we check the power state with the newly introduced snd_power_ref_and_wait(). This function also takes the card.power_ref refcount for tracking this in-flight task. Once after the access finishes, snd_power_unref() is called to released the refcount in return. So the driver can sync via snd_power_sync_ref() assuring that all in-flight tasks have been finished. As of this patch, snd_power_sync_ref() is called only at snd_card_disconnect(), but it'll be used in other places in future. Note that atomic_t is used for power_ref intentionally instead of refcount_t. It's because of the design of refcount_t type; refcount_t cannot be zero-based, and it cannot do dec_and_test() call for multiple times, hence it's not suitable for our purpose. Also, this patch changes snd_power_wait() to accept only SNDRV_CTL_POWER_D0, which is the only value that makes sense. In later patch, the snd_power_wait() calls will be cleaned up. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20210523090920.15345-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-23 09:09:16 +00:00
/**
* snd_power_ref - Take the reference count for power control
* @card: sound card object
*
* The power_ref reference of the card is used for managing to block
* the snd_power_sync_ref() operation. This function increments the reference.
* The counterpart snd_power_unref() has to be called appropriately later.
*/
static inline void snd_power_ref(struct snd_card *card)
{
atomic_inc(&card->power_ref);
}
/**
* snd_power_unref - Release the reference count for power control
* @card: sound card object
*/
static inline void snd_power_unref(struct snd_card *card)
{
if (atomic_dec_and_test(&card->power_ref))
wake_up(&card->power_ref_sleep);
}
/**
* snd_power_sync_ref - wait until the card power_ref is freed
* @card: sound card object
*
* This function is used to synchronize with the pending power_ref being
* released.
*/
static inline void snd_power_sync_ref(struct snd_card *card)
{
wait_event(card->power_ref_sleep, !atomic_read(&card->power_ref));
}
/* init.c */
int snd_power_wait(struct snd_card *card);
ALSA: control: Track in-flight control read/write/tlv accesses Although the power state check is performed in various places (e.g. at the entrance of quite a few ioctls), there can be still some pending tasks that already went into the ioctl handler or other ops, and those may access the hardware even after the power state check. For example, kcontrol access ioctl paths that call info/get/put callbacks may update the hardware registers. If a system wants to assure the free from such hw access (like the case of PCI rescan feature we're going to implement in future), this situation must be avoided, and we have to sync such in-flight tasks finishing beforehand. For that purpose, this patch introduces a few new things in core code: - A refcount, power_ref, and a wait queue, power_ref_sleep, to the card object - A few new helpers, snd_power_ref(), snd_power_unref(), snd_power_ref_and_wait(), and snd_power_sync_ref() In the code paths that call kctl info/read/write/tlv ops, we check the power state with the newly introduced snd_power_ref_and_wait(). This function also takes the card.power_ref refcount for tracking this in-flight task. Once after the access finishes, snd_power_unref() is called to released the refcount in return. So the driver can sync via snd_power_sync_ref() assuring that all in-flight tasks have been finished. As of this patch, snd_power_sync_ref() is called only at snd_card_disconnect(), but it'll be used in other places in future. Note that atomic_t is used for power_ref intentionally instead of refcount_t. It's because of the design of refcount_t type; refcount_t cannot be zero-based, and it cannot do dec_and_test() call for multiple times, hence it's not suitable for our purpose. Also, this patch changes snd_power_wait() to accept only SNDRV_CTL_POWER_D0, which is the only value that makes sense. In later patch, the snd_power_wait() calls will be cleaned up. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20210523090920.15345-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-23 09:09:16 +00:00
int snd_power_ref_and_wait(struct snd_card *card);
#else /* ! CONFIG_PM */
static inline int snd_power_wait(struct snd_card *card) { return 0; }
ALSA: control: Track in-flight control read/write/tlv accesses Although the power state check is performed in various places (e.g. at the entrance of quite a few ioctls), there can be still some pending tasks that already went into the ioctl handler or other ops, and those may access the hardware even after the power state check. For example, kcontrol access ioctl paths that call info/get/put callbacks may update the hardware registers. If a system wants to assure the free from such hw access (like the case of PCI rescan feature we're going to implement in future), this situation must be avoided, and we have to sync such in-flight tasks finishing beforehand. For that purpose, this patch introduces a few new things in core code: - A refcount, power_ref, and a wait queue, power_ref_sleep, to the card object - A few new helpers, snd_power_ref(), snd_power_unref(), snd_power_ref_and_wait(), and snd_power_sync_ref() In the code paths that call kctl info/read/write/tlv ops, we check the power state with the newly introduced snd_power_ref_and_wait(). This function also takes the card.power_ref refcount for tracking this in-flight task. Once after the access finishes, snd_power_unref() is called to released the refcount in return. So the driver can sync via snd_power_sync_ref() assuring that all in-flight tasks have been finished. As of this patch, snd_power_sync_ref() is called only at snd_card_disconnect(), but it'll be used in other places in future. Note that atomic_t is used for power_ref intentionally instead of refcount_t. It's because of the design of refcount_t type; refcount_t cannot be zero-based, and it cannot do dec_and_test() call for multiple times, hence it's not suitable for our purpose. Also, this patch changes snd_power_wait() to accept only SNDRV_CTL_POWER_D0, which is the only value that makes sense. In later patch, the snd_power_wait() calls will be cleaned up. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20210523090920.15345-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-23 09:09:16 +00:00
static inline void snd_power_ref(struct snd_card *card) {}
static inline void snd_power_unref(struct snd_card *card) {}
static inline int snd_power_ref_and_wait(struct snd_card *card) { return 0; }
static inline void snd_power_sync_ref(struct snd_card *card) {}
#define snd_power_get_state(card) ({ (void)(card); SNDRV_CTL_POWER_D0; })
#define snd_power_change_state(card, state) do { (void)(card); } while (0)
#endif /* CONFIG_PM */
struct snd_minor {
int type; /* SNDRV_DEVICE_TYPE_XXX */
int card; /* card number */
int device; /* device number */
const struct file_operations *f_ops; /* file operations */
void *private_data; /* private data for f_ops->open */
struct device *dev; /* device for sysfs */
struct snd_card *card_ptr; /* assigned card instance */
};
/* return a device pointer linked to each sound device as a parent */
static inline struct device *snd_card_get_device_link(struct snd_card *card)
{
return card ? &card->card_dev : NULL;
}
/* sound.c */
extern int snd_major;
extern int snd_ecards_limit;
extern struct class *sound_class;
ALSA: jack: implement software jack injection via debugfs This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │   ├── HDMI_DP_pcm_10_Jack │   │   ├── jackin_inject │   │   ├── kctl_id │   │   ├── mask_bits │   │   ├── status │   │   ├── sw_inject_enable │   │   └── type ... │   └── HDMI_DP_pcm_9_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── card1 ├── HDMI_DP_pcm_5_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type ... ├── Headphone_Jack │   ├── jackin_inject │   ├── kctl_id │   ├── mask_bits │   ├── status │   ├── sw_inject_enable │   └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-27 08:56:39 +00:00
#ifdef CONFIG_SND_DEBUG
extern struct dentry *sound_debugfs_root;
#endif
void snd_request_card(int card);
void snd_device_initialize(struct device *dev, struct snd_card *card);
int snd_register_device(int type, struct snd_card *card, int dev,
const struct file_operations *f_ops,
void *private_data, struct device *device);
int snd_unregister_device(struct device *dev);
void *snd_lookup_minor_data(unsigned int minor, int type);
#ifdef CONFIG_SND_OSSEMUL
int snd_register_oss_device(int type, struct snd_card *card, int dev,
const struct file_operations *f_ops, void *private_data);
int snd_unregister_oss_device(int type, struct snd_card *card, int dev);
void *snd_lookup_oss_minor_data(unsigned int minor, int type);
#endif
int snd_minor_info_init(void);
/* sound_oss.c */
#ifdef CONFIG_SND_OSSEMUL
int snd_minor_info_oss_init(void);
#else
static inline int snd_minor_info_oss_init(void) { return 0; }
#endif
/* memory.c */
int copy_to_user_fromio(void __user *dst, const volatile void __iomem *src, size_t count);
int copy_from_user_toio(volatile void __iomem *dst, const void __user *src, size_t count);
/* init.c */
int snd_card_locked(int card);
#if IS_ENABLED(CONFIG_SND_MIXER_OSS)
#define SND_MIXER_OSS_NOTIFY_REGISTER 0
#define SND_MIXER_OSS_NOTIFY_DISCONNECT 1
#define SND_MIXER_OSS_NOTIFY_FREE 2
extern int (*snd_mixer_oss_notify_callback)(struct snd_card *card, int cmd);
#endif
int snd_card_new(struct device *parent, int idx, const char *xid,
struct module *module, int extra_size,
struct snd_card **card_ret);
2021-07-15 07:58:24 +00:00
int snd_devm_card_new(struct device *parent, int idx, const char *xid,
struct module *module, size_t extra_size,
struct snd_card **card_ret);
void snd_card_disconnect(struct snd_card *card);
ALSA: add snd_card_disconnect_sync() In case of user unbind ALSA driver during playing back / capturing, each driver needs to stop and remove it correctly. One note here is that we can't cancel from remove function in such case, because unbind operation doesn't check return value from remove function. So, we *must* stop and remove in this case. For this purpose, we need to sync (= wait) until the all top-level operations are canceled at remove function. For example, snd_card_free() processes the disconnection procedure at first, then waits for the completion. That's how the hot-unplug works safely. It's implemented, at least, in the top-level driver removal. Now for the lower level driver, we need a similar strategy. Notify to the toplevel for hot-unplug (disconnect in ALSA), and sync with the stop operation, then continue the rest of its own remove procedure. This patch adds snd_card_disconnect_sync(), and driver can use it from remove function. Note: the "lower level" driver here refers to a middle layer driver (e.g. ASoC components) that can be unbound freely during operation. Most of legacy ALSA helper drivers don't have such a problem because they can't be unbound. Note#2: snd_card_disconnect_sync() merely calls snd_card_disconnect() and syncs with closing all pending files. It takes only the files opened by user-space into account, and doesn't care about object refcounts. (The latter is handled by snd_card_free() completion call, BTW.) Also, the function doesn't free resources by itself. Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-11 06:36:13 +00:00
void snd_card_disconnect_sync(struct snd_card *card);
void snd_card_free(struct snd_card *card);
void snd_card_free_when_closed(struct snd_card *card);
int snd_card_free_on_error(struct device *dev, int ret);
void snd_card_set_id(struct snd_card *card, const char *id);
int snd_card_register(struct snd_card *card);
int snd_card_info_init(void);
int snd_card_add_dev_attr(struct snd_card *card,
const struct attribute_group *group);
int snd_component_add(struct snd_card *card, const char *component);
int snd_card_file_add(struct snd_card *card, struct file *file);
int snd_card_file_remove(struct snd_card *card, struct file *file);
struct snd_card *snd_card_ref(int card);
/**
* snd_card_unref - Unreference the card object
* @card: the card object to unreference
*
* Call this function for the card object that was obtained via snd_card_ref()
* or snd_lookup_minor_data().
*/
static inline void snd_card_unref(struct snd_card *card)
{
put_device(&card->card_dev);
}
#define snd_card_set_dev(card, devptr) ((card)->dev = (devptr))
/* device.c */
int snd_device_new(struct snd_card *card, enum snd_device_type type,
void *device_data, const struct snd_device_ops *ops);
int snd_device_register(struct snd_card *card, void *device_data);
int snd_device_register_all(struct snd_card *card);
void snd_device_disconnect(struct snd_card *card, void *device_data);
void snd_device_disconnect_all(struct snd_card *card);
void snd_device_free(struct snd_card *card, void *device_data);
void snd_device_free_all(struct snd_card *card);
int snd_device_get_state(struct snd_card *card, void *device_data);
/* isadma.c */
#ifdef CONFIG_ISA_DMA_API
#define DMA_MODE_NO_ENABLE 0x0100
void snd_dma_program(unsigned long dma, unsigned long addr, unsigned int size, unsigned short mode);
void snd_dma_disable(unsigned long dma);
unsigned int snd_dma_pointer(unsigned long dma, unsigned int size);
int snd_devm_request_dma(struct device *dev, int dma, const char *name);
#endif
/* misc.c */
struct resource;
void release_and_free_resource(struct resource *res);
/* --- */
/* sound printk debug levels */
enum {
SND_PR_ALWAYS,
SND_PR_DEBUG,
SND_PR_VERBOSE,
};
#if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK)
__printf(4, 5)
void __snd_printk(unsigned int level, const char *file, int line,
const char *format, ...);
#else
#define __snd_printk(level, file, line, format, ...) \
printk(format, ##__VA_ARGS__)
#endif
/**
* snd_printk - printk wrapper
* @fmt: format string
*
* Works like printk() but prints the file and the line of the caller
* when configured with CONFIG_SND_VERBOSE_PRINTK.
*/
#define snd_printk(fmt, ...) \
__snd_printk(0, __FILE__, __LINE__, fmt, ##__VA_ARGS__)
#ifdef CONFIG_SND_DEBUG
/**
* snd_printd - debug printk
* @fmt: format string
*
* Works like snd_printk() for debugging purposes.
* Ignored when CONFIG_SND_DEBUG is not set.
*/
#define snd_printd(fmt, ...) \
__snd_printk(1, __FILE__, __LINE__, fmt, ##__VA_ARGS__)
#define _snd_printd(level, fmt, ...) \
__snd_printk(level, __FILE__, __LINE__, fmt, ##__VA_ARGS__)
/**
* snd_BUG - give a BUG warning message and stack trace
*
* Calls WARN() if CONFIG_SND_DEBUG is set.
* Ignored when CONFIG_SND_DEBUG is not set.
*/
#define snd_BUG() WARN(1, "BUG?\n")
/**
* snd_printd_ratelimit - Suppress high rates of output when
* CONFIG_SND_DEBUG is enabled.
*/
#define snd_printd_ratelimit() printk_ratelimit()
/**
* snd_BUG_ON - debugging check macro
* @cond: condition to evaluate
*
* Has the same behavior as WARN_ON when CONFIG_SND_DEBUG is set,
* otherwise just evaluates the conditional and returns the value.
*/
#define snd_BUG_ON(cond) WARN_ON((cond))
#else /* !CONFIG_SND_DEBUG */
__printf(1, 2)
static inline void snd_printd(const char *format, ...) {}
__printf(2, 3)
static inline void _snd_printd(int level, const char *format, ...) {}
#define snd_BUG() do { } while (0)
#define snd_BUG_ON(condition) ({ \
int __ret_warn_on = !!(condition); \
unlikely(__ret_warn_on); \
})
static inline bool snd_printd_ratelimit(void) { return false; }
#endif /* CONFIG_SND_DEBUG */
#ifdef CONFIG_SND_DEBUG_VERBOSE
/**
* snd_printdd - debug printk
* @format: format string
*
* Works like snd_printk() for debugging purposes.
* Ignored when CONFIG_SND_DEBUG_VERBOSE is not set.
*/
#define snd_printdd(format, ...) \
__snd_printk(2, __FILE__, __LINE__, format, ##__VA_ARGS__)
#else
__printf(1, 2)
static inline void snd_printdd(const char *format, ...) {}
#endif
#define SNDRV_OSS_VERSION ((3<<16)|(8<<8)|(1<<4)|(0)) /* 3.8.1a */
/* for easier backward-porting */
#if IS_ENABLED(CONFIG_GAMEPORT)
#define gameport_set_dev_parent(gp,xdev) ((gp)->dev.parent = (xdev))
#define gameport_set_port_data(gp,r) ((gp)->port_data = (r))
#define gameport_get_port_data(gp) (gp)->port_data
#endif
/* PCI quirk list helper */
struct snd_pci_quirk {
unsigned short subvendor; /* PCI subvendor ID */
unsigned short subdevice; /* PCI subdevice ID */
unsigned short subdevice_mask; /* bitmask to match */
int value; /* value */
#ifdef CONFIG_SND_DEBUG_VERBOSE
const char *name; /* name of the device (optional) */
#endif
};
#define _SND_PCI_QUIRK_ID_MASK(vend, mask, dev) \
.subvendor = (vend), .subdevice = (dev), .subdevice_mask = (mask)
#define _SND_PCI_QUIRK_ID(vend, dev) \
_SND_PCI_QUIRK_ID_MASK(vend, 0xffff, dev)
#define SND_PCI_QUIRK_ID(vend,dev) {_SND_PCI_QUIRK_ID(vend, dev)}
#ifdef CONFIG_SND_DEBUG_VERBOSE
#define SND_PCI_QUIRK(vend,dev,xname,val) \
{_SND_PCI_QUIRK_ID(vend, dev), .value = (val), .name = (xname)}
#define SND_PCI_QUIRK_VENDOR(vend, xname, val) \
{_SND_PCI_QUIRK_ID_MASK(vend, 0, 0), .value = (val), .name = (xname)}
#define SND_PCI_QUIRK_MASK(vend, mask, dev, xname, val) \
{_SND_PCI_QUIRK_ID_MASK(vend, mask, dev), \
.value = (val), .name = (xname)}
#define snd_pci_quirk_name(q) ((q)->name)
#else
#define SND_PCI_QUIRK(vend,dev,xname,val) \
{_SND_PCI_QUIRK_ID(vend, dev), .value = (val)}
#define SND_PCI_QUIRK_MASK(vend, mask, dev, xname, val) \
{_SND_PCI_QUIRK_ID_MASK(vend, mask, dev), .value = (val)}
#define SND_PCI_QUIRK_VENDOR(vend, xname, val) \
{_SND_PCI_QUIRK_ID_MASK(vend, 0, 0), .value = (val)}
#define snd_pci_quirk_name(q) ""
#endif
#ifdef CONFIG_PCI
const struct snd_pci_quirk *
snd_pci_quirk_lookup(struct pci_dev *pci, const struct snd_pci_quirk *list);
const struct snd_pci_quirk *
snd_pci_quirk_lookup_id(u16 vendor, u16 device,
const struct snd_pci_quirk *list);
#else
static inline const struct snd_pci_quirk *
snd_pci_quirk_lookup(struct pci_dev *pci, const struct snd_pci_quirk *list)
{
return NULL;
}
static inline const struct snd_pci_quirk *
snd_pci_quirk_lookup_id(u16 vendor, u16 device,
const struct snd_pci_quirk *list)
{
return NULL;
}
#endif
/* async signal helpers */
struct snd_fasync;
int snd_fasync_helper(int fd, struct file *file, int on,
struct snd_fasync **fasyncp);
void snd_kill_fasync(struct snd_fasync *fasync, int signal, int poll);
void snd_fasync_free(struct snd_fasync *fasync);
#endif /* __SOUND_CORE_H */