License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* linux/kernel/seccomp.c
|
|
|
|
*
|
|
|
|
* Copyright 2004-2005 Andrea Arcangeli <andrea@cpushare.com>
|
|
|
|
*
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
* Copyright (C) 2012 Google, Inc.
|
|
|
|
* Will Drewry <wad@chromium.org>
|
|
|
|
*
|
|
|
|
* This defines a simple but solid secure-computing facility.
|
|
|
|
*
|
|
|
|
* Mode 1 uses a fixed list of allowed system calls.
|
|
|
|
* Mode 2 allows user-defined system call filters in the form
|
|
|
|
* of Berkeley Packet Filters/Linux Socket Filters.
|
2005-04-16 22:20:36 +00:00
|
|
|
*/
|
2020-06-16 05:02:56 +00:00
|
|
|
#define pr_fmt(fmt) "seccomp: " fmt
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2017-06-26 16:24:00 +00:00
|
|
|
#include <linux/refcount.h>
|
2012-01-03 19:23:05 +00:00
|
|
|
#include <linux/audit.h>
|
x86-64: seccomp: fix 32/64 syscall hole
On x86-64, a 32-bit process (TIF_IA32) can switch to 64-bit mode with
ljmp, and then use the "syscall" instruction to make a 64-bit system
call. A 64-bit process make a 32-bit system call with int $0x80.
In both these cases under CONFIG_SECCOMP=y, secure_computing() will use
the wrong system call number table. The fix is simple: test TS_COMPAT
instead of TIF_IA32. Here is an example exploit:
/* test case for seccomp circumvention on x86-64
There are two failure modes: compile with -m64 or compile with -m32.
The -m64 case is the worst one, because it does "chmod 777 ." (could
be any chmod call). The -m32 case demonstrates it was able to do
stat(), which can glean information but not harm anything directly.
A buggy kernel will let the test do something, print, and exit 1; a
fixed kernel will make it exit with SIGKILL before it does anything.
*/
#define _GNU_SOURCE
#include <assert.h>
#include <inttypes.h>
#include <stdio.h>
#include <linux/prctl.h>
#include <sys/stat.h>
#include <unistd.h>
#include <asm/unistd.h>
int
main (int argc, char **argv)
{
char buf[100];
static const char dot[] = ".";
long ret;
unsigned st[24];
if (prctl (PR_SET_SECCOMP, 1, 0, 0, 0) != 0)
perror ("prctl(PR_SET_SECCOMP) -- not compiled into kernel?");
#ifdef __x86_64__
assert ((uintptr_t) dot < (1UL << 32));
asm ("int $0x80 # %0 <- %1(%2 %3)"
: "=a" (ret) : "0" (15), "b" (dot), "c" (0777));
ret = snprintf (buf, sizeof buf,
"result %ld (check mode on .!)\n", ret);
#elif defined __i386__
asm (".code32\n"
"pushl %%cs\n"
"pushl $2f\n"
"ljmpl $0x33, $1f\n"
".code64\n"
"1: syscall # %0 <- %1(%2 %3)\n"
"lretl\n"
".code32\n"
"2:"
: "=a" (ret) : "0" (4), "D" (dot), "S" (&st));
if (ret == 0)
ret = snprintf (buf, sizeof buf,
"stat . -> st_uid=%u\n", st[7]);
else
ret = snprintf (buf, sizeof buf, "result %ld\n", ret);
#else
# error "not this one"
#endif
write (1, buf, ret);
syscall (__NR_exit, 1);
return 2;
}
Signed-off-by: Roland McGrath <roland@redhat.com>
[ I don't know if anybody actually uses seccomp, but it's enabled in
at least both Fedora and SuSE kernels, so maybe somebody is. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-28 07:25:54 +00:00
|
|
|
#include <linux/compat.h>
|
2017-01-20 04:28:57 +00:00
|
|
|
#include <linux/coredump.h>
|
2017-08-11 04:33:52 +00:00
|
|
|
#include <linux/kmemleak.h>
|
2018-05-01 22:07:31 +00:00
|
|
|
#include <linux/nospec.h>
|
|
|
|
#include <linux/prctl.h>
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
#include <linux/sched.h>
|
2017-02-08 17:51:37 +00:00
|
|
|
#include <linux/sched/task_stack.h>
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
#include <linux/seccomp.h>
|
2014-06-27 22:16:33 +00:00
|
|
|
#include <linux/slab.h>
|
2014-06-25 23:08:24 +00:00
|
|
|
#include <linux/syscalls.h>
|
2017-08-11 04:33:52 +00:00
|
|
|
#include <linux/sysctl.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
|
seccomp,x86,arm,mips,s390: Remove nr parameter from secure_computing
The secure_computing function took a syscall number parameter, but
it only paid any attention to that parameter if seccomp mode 1 was
enabled. Rather than coming up with a kludge to get the parameter
to work in mode 2, just remove the parameter.
To avoid churn in arches that don't have seccomp filters (and may
not even support syscall_get_nr right now), this leaves the
parameter in secure_computing_strict, which is now a real function.
For ARM, this is a bit ugly due to the fact that ARM conditionally
supports seccomp filters. Fixing that would probably only be a
couple of lines of code, but it should be coordinated with the audit
maintainers.
This will be a slight slowdown on some arches. The right fix is to
pass in all of seccomp_data instead of trying to make just the
syscall nr part be fast.
This is a prerequisite for making two-phase seccomp work cleanly.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: x86@kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
2014-07-22 01:49:14 +00:00
|
|
|
#ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
#include <asm/syscall.h>
|
seccomp,x86,arm,mips,s390: Remove nr parameter from secure_computing
The secure_computing function took a syscall number parameter, but
it only paid any attention to that parameter if seccomp mode 1 was
enabled. Rather than coming up with a kludge to get the parameter
to work in mode 2, just remove the parameter.
To avoid churn in arches that don't have seccomp filters (and may
not even support syscall_get_nr right now), this leaves the
parameter in secure_computing_strict, which is now a real function.
For ARM, this is a bit ugly due to the fact that ARM conditionally
supports seccomp filters. Fixing that would probably only be a
couple of lines of code, but it should be coordinated with the audit
maintainers.
This will be a slight slowdown on some arches. The right fix is to
pass in all of seccomp_data instead of trying to make just the
syscall nr part be fast.
This is a prerequisite for making two-phase seccomp work cleanly.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: x86@kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
2014-07-22 01:49:14 +00:00
|
|
|
#endif
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
|
|
|
|
#ifdef CONFIG_SECCOMP_FILTER
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
#include <linux/file.h>
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
#include <linux/filter.h>
|
2014-06-05 07:23:17 +00:00
|
|
|
#include <linux/pid.h>
|
2012-04-12 21:48:02 +00:00
|
|
|
#include <linux/ptrace.h>
|
2020-10-30 12:38:49 +00:00
|
|
|
#include <linux/capability.h>
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
#include <linux/tracehook.h>
|
|
|
|
#include <linux/uaccess.h>
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
#include <linux/anon_inodes.h>
|
2020-06-01 11:25:32 +00:00
|
|
|
#include <linux/lockdep.h>
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
|
2020-06-15 22:42:46 +00:00
|
|
|
/*
|
|
|
|
* When SECCOMP_IOCTL_NOTIF_ID_VALID was first introduced, it had the
|
|
|
|
* wrong direction flag in the ioctl number. This is the broken one,
|
|
|
|
* which the kernel needs to keep supporting until all userspaces stop
|
|
|
|
* using the wrong command number.
|
|
|
|
*/
|
|
|
|
#define SECCOMP_IOCTL_NOTIF_ID_VALID_WRONG_DIR SECCOMP_IOR(2, __u64)
|
|
|
|
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
enum notify_state {
|
|
|
|
SECCOMP_NOTIFY_INIT,
|
|
|
|
SECCOMP_NOTIFY_SENT,
|
|
|
|
SECCOMP_NOTIFY_REPLIED,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct seccomp_knotif {
|
|
|
|
/* The struct pid of the task whose filter triggered the notification */
|
|
|
|
struct task_struct *task;
|
|
|
|
|
|
|
|
/* The "cookie" for this request; this is unique for this filter. */
|
|
|
|
u64 id;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The seccomp data. This pointer is valid the entire time this
|
|
|
|
* notification is active, since it comes from __seccomp_filter which
|
|
|
|
* eclipses the entire lifecycle here.
|
|
|
|
*/
|
|
|
|
const struct seccomp_data *data;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Notification states. When SECCOMP_RET_USER_NOTIF is returned, a
|
|
|
|
* struct seccomp_knotif is created and starts out in INIT. Once the
|
|
|
|
* handler reads the notification off of an FD, it transitions to SENT.
|
|
|
|
* If a signal is received the state transitions back to INIT and
|
|
|
|
* another message is sent. When the userspace handler replies, state
|
|
|
|
* transitions to REPLIED.
|
|
|
|
*/
|
|
|
|
enum notify_state state;
|
|
|
|
|
|
|
|
/* The return values, only valid when in SECCOMP_NOTIFY_REPLIED */
|
|
|
|
int error;
|
|
|
|
long val;
|
2019-09-20 08:30:05 +00:00
|
|
|
u32 flags;
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
/*
|
|
|
|
* Signals when this has changed states, such as the listener
|
|
|
|
* dying, a new seccomp addfd message, or changing to REPLIED
|
|
|
|
*/
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
struct completion ready;
|
|
|
|
|
|
|
|
struct list_head list;
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
|
|
|
|
/* outstanding addfd requests */
|
|
|
|
struct list_head addfd;
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct seccomp_kaddfd - container for seccomp_addfd ioctl messages
|
|
|
|
*
|
|
|
|
* @file: A reference to the file to install in the other task
|
|
|
|
* @fd: The fd number to install it at. If the fd number is -1, it means the
|
|
|
|
* installing process should allocate the fd as normal.
|
|
|
|
* @flags: The flags for the new file descriptor. At the moment, only O_CLOEXEC
|
|
|
|
* is allowed.
|
seccomp: Support atomic "addfd + send reply"
Alban Crequy reported a race condition userspace faces when we want to
add some fds and make the syscall return them[1] using seccomp notify.
The problem is that currently two different ioctl() calls are needed by
the process handling the syscalls (agent) for another userspace process
(target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and
SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible
for the agent to do the first ioctl to add a file descriptor but the
target is interrupted (EINTR) before the agent does the second ioctl()
call.
This patch adds a flag to the ADDFD ioctl() so it adds the fd and
returns that value atomically to the target program, as suggested by
Kees Cook[2]. This is done by simply allowing
seccomp_do_user_notification() to add the fd and return it in this case.
Therefore, in this case the target wakes up from the wait in
seccomp_do_user_notification() either to interrupt the syscall or to add
the fd and return it.
This "allocate an fd and return" functionality is useful for syscalls
that return a file descriptor only, like connect(2). Other syscalls that
return a file descriptor but not as return value (or return more than
one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not
work with this flag.
This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and
SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's
return value, nor error can be set by the user. Upon successful invocation
of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND
flag, the notifying process's errno will be 0, and the return value will
be the file descriptor number that was installed.
[1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/
Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
|
|
|
* @ioctl_flags: The flags used for the seccomp_addfd ioctl.
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
* @ret: The return value of the installing process. It is set to the fd num
|
|
|
|
* upon success (>= 0).
|
|
|
|
* @completion: Indicates that the installing process has completed fd
|
|
|
|
* installation, or gone away (either due to successful
|
|
|
|
* reply, or signal)
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
struct seccomp_kaddfd {
|
|
|
|
struct file *file;
|
|
|
|
int fd;
|
|
|
|
unsigned int flags;
|
seccomp: Support atomic "addfd + send reply"
Alban Crequy reported a race condition userspace faces when we want to
add some fds and make the syscall return them[1] using seccomp notify.
The problem is that currently two different ioctl() calls are needed by
the process handling the syscalls (agent) for another userspace process
(target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and
SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible
for the agent to do the first ioctl to add a file descriptor but the
target is interrupted (EINTR) before the agent does the second ioctl()
call.
This patch adds a flag to the ADDFD ioctl() so it adds the fd and
returns that value atomically to the target program, as suggested by
Kees Cook[2]. This is done by simply allowing
seccomp_do_user_notification() to add the fd and return it in this case.
Therefore, in this case the target wakes up from the wait in
seccomp_do_user_notification() either to interrupt the syscall or to add
the fd and return it.
This "allocate an fd and return" functionality is useful for syscalls
that return a file descriptor only, like connect(2). Other syscalls that
return a file descriptor but not as return value (or return more than
one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not
work with this flag.
This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and
SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's
return value, nor error can be set by the user. Upon successful invocation
of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND
flag, the notifying process's errno will be 0, and the return value will
be the file descriptor number that was installed.
[1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/
Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
|
|
|
__u32 ioctl_flags;
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
|
2021-03-25 08:22:09 +00:00
|
|
|
union {
|
|
|
|
bool setfd;
|
|
|
|
/* To only be set on reply */
|
|
|
|
int ret;
|
|
|
|
};
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
struct completion completion;
|
|
|
|
struct list_head list;
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct notification - container for seccomp userspace notifications. Since
|
|
|
|
* most seccomp filters will not have notification listeners attached and this
|
|
|
|
* structure is fairly large, we store the notification-specific stuff in a
|
|
|
|
* separate structure.
|
|
|
|
*
|
|
|
|
* @request: A semaphore that users of this notification can wait on for
|
|
|
|
* changes. Actual reads and writes are still controlled with
|
|
|
|
* filter->notify_lock.
|
|
|
|
* @next_id: The id of the next request.
|
|
|
|
* @notifications: A list of struct seccomp_knotif elements.
|
|
|
|
*/
|
|
|
|
struct notification {
|
|
|
|
struct semaphore request;
|
|
|
|
u64 next_id;
|
|
|
|
struct list_head notifications;
|
|
|
|
};
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
|
seccomp/cache: Lookup syscall allowlist bitmap for fast path
The overhead of running Seccomp filters has been part of some past
discussions [1][2][3]. Oftentimes, the filters have a large number
of instructions that check syscall numbers one by one and jump based
on that. Some users chain BPF filters which further enlarge the
overhead. A recent work [6] comprehensively measures the Seccomp
overhead and shows that the overhead is non-negligible and has a
non-trivial impact on application performance.
We observed some common filters, such as docker's [4] or
systemd's [5], will make most decisions based only on the syscall
numbers, and as past discussions considered, a bitmap where each bit
represents a syscall makes most sense for these filters.
The fast (common) path for seccomp should be that the filter permits
the syscall to pass through, and failing seccomp is expected to be
an exceptional case; it is not expected for userspace to call a
denylisted syscall over and over.
When it can be concluded that an allow must occur for the given
architecture and syscall pair (this determination is introduced in
the next commit), seccomp will immediately allow the syscall,
bypassing further BPF execution.
Each architecture number has its own bitmap. The architecture
number in seccomp_data is checked against the defined architecture
number constant before proceeding to test the bit against the
bitmap with the syscall number as the index of the bit in the
bitmap, and if the bit is set, seccomp returns allow. The bitmaps
are all clear in this patch and will be initialized in the next
commit.
When only one architecture exists, the check against architecture
number is skipped, suggested by Kees Cook [7].
[1] https://lore.kernel.org/linux-security-module/c22a6c3cefc2412cad00ae14c1371711@huawei.com/T/
[2] https://lore.kernel.org/lkml/202005181120.971232B7B@keescook/T/
[3] https://github.com/seccomp/libseccomp/issues/116
[4] https://github.com/moby/moby/blob/ae0ef82b90356ac613f329a8ef5ee42ca923417d/profiles/seccomp/default.json
[5] https://github.com/systemd/systemd/blob/6743a1caf4037f03dc51a1277855018e4ab61957/src/shared/seccomp-util.c#L270
[6] Draco: Architectural and Operating System Support for System Call Security
https://tianyin.github.io/pub/draco.pdf, MICRO-53, Oct. 2020
[7] https://lore.kernel.org/bpf/202010091614.8BB0EB64@keescook/
Co-developed-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu>
Signed-off-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu>
Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/10f91a367ec4fcdea7fc3f086de3f5f13a4a7436.1602431034.git.yifeifz2@illinois.edu
2020-10-11 15:47:42 +00:00
|
|
|
#ifdef SECCOMP_ARCH_NATIVE
|
|
|
|
/**
|
|
|
|
* struct action_cache - per-filter cache of seccomp actions per
|
|
|
|
* arch/syscall pair
|
|
|
|
*
|
|
|
|
* @allow_native: A bitmap where each bit represents whether the
|
|
|
|
* filter will always allow the syscall, for the
|
|
|
|
* native architecture.
|
|
|
|
* @allow_compat: A bitmap where each bit represents whether the
|
|
|
|
* filter will always allow the syscall, for the
|
|
|
|
* compat architecture.
|
|
|
|
*/
|
|
|
|
struct action_cache {
|
|
|
|
DECLARE_BITMAP(allow_native, SECCOMP_ARCH_NATIVE_NR);
|
|
|
|
#ifdef SECCOMP_ARCH_COMPAT
|
|
|
|
DECLARE_BITMAP(allow_compat, SECCOMP_ARCH_COMPAT_NR);
|
|
|
|
#endif
|
|
|
|
};
|
|
|
|
#else
|
|
|
|
struct action_cache { };
|
|
|
|
|
|
|
|
static inline bool seccomp_cache_check_allow(const struct seccomp_filter *sfilter,
|
|
|
|
const struct seccomp_data *sd)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
2020-10-11 15:47:43 +00:00
|
|
|
|
|
|
|
static inline void seccomp_cache_prepare(struct seccomp_filter *sfilter)
|
|
|
|
{
|
|
|
|
}
|
seccomp/cache: Lookup syscall allowlist bitmap for fast path
The overhead of running Seccomp filters has been part of some past
discussions [1][2][3]. Oftentimes, the filters have a large number
of instructions that check syscall numbers one by one and jump based
on that. Some users chain BPF filters which further enlarge the
overhead. A recent work [6] comprehensively measures the Seccomp
overhead and shows that the overhead is non-negligible and has a
non-trivial impact on application performance.
We observed some common filters, such as docker's [4] or
systemd's [5], will make most decisions based only on the syscall
numbers, and as past discussions considered, a bitmap where each bit
represents a syscall makes most sense for these filters.
The fast (common) path for seccomp should be that the filter permits
the syscall to pass through, and failing seccomp is expected to be
an exceptional case; it is not expected for userspace to call a
denylisted syscall over and over.
When it can be concluded that an allow must occur for the given
architecture and syscall pair (this determination is introduced in
the next commit), seccomp will immediately allow the syscall,
bypassing further BPF execution.
Each architecture number has its own bitmap. The architecture
number in seccomp_data is checked against the defined architecture
number constant before proceeding to test the bit against the
bitmap with the syscall number as the index of the bit in the
bitmap, and if the bit is set, seccomp returns allow. The bitmaps
are all clear in this patch and will be initialized in the next
commit.
When only one architecture exists, the check against architecture
number is skipped, suggested by Kees Cook [7].
[1] https://lore.kernel.org/linux-security-module/c22a6c3cefc2412cad00ae14c1371711@huawei.com/T/
[2] https://lore.kernel.org/lkml/202005181120.971232B7B@keescook/T/
[3] https://github.com/seccomp/libseccomp/issues/116
[4] https://github.com/moby/moby/blob/ae0ef82b90356ac613f329a8ef5ee42ca923417d/profiles/seccomp/default.json
[5] https://github.com/systemd/systemd/blob/6743a1caf4037f03dc51a1277855018e4ab61957/src/shared/seccomp-util.c#L270
[6] Draco: Architectural and Operating System Support for System Call Security
https://tianyin.github.io/pub/draco.pdf, MICRO-53, Oct. 2020
[7] https://lore.kernel.org/bpf/202010091614.8BB0EB64@keescook/
Co-developed-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu>
Signed-off-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu>
Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/10f91a367ec4fcdea7fc3f086de3f5f13a4a7436.1602431034.git.yifeifz2@illinois.edu
2020-10-11 15:47:42 +00:00
|
|
|
#endif /* SECCOMP_ARCH_NATIVE */
|
|
|
|
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
/**
|
|
|
|
* struct seccomp_filter - container for seccomp BPF programs
|
|
|
|
*
|
2020-05-31 11:50:28 +00:00
|
|
|
* @refs: Reference count to manage the object lifetime.
|
|
|
|
* A filter's reference count is incremented for each directly
|
|
|
|
* attached task, once for the dependent filter, and if
|
|
|
|
* requested for the user notifier. When @refs reaches zero,
|
|
|
|
* the filter can be freed.
|
2020-05-31 11:50:30 +00:00
|
|
|
* @users: A filter's @users count is incremented for each directly
|
|
|
|
* attached task (filter installation, fork(), thread_sync),
|
|
|
|
* and once for the dependent filter (tracked in filter->prev).
|
|
|
|
* When it reaches zero it indicates that no direct or indirect
|
|
|
|
* users of that filter exist. No new tasks can get associated with
|
|
|
|
* this filter after reaching 0. The @users count is always smaller
|
|
|
|
* or equal to @refs. Hence, reaching 0 for @users does not mean
|
|
|
|
* the filter can be freed.
|
2020-10-11 15:47:43 +00:00
|
|
|
* @cache: cache of arch/syscall mappings to actions
|
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for
all actions except for SECCOMP_RET_ALLOW for the given filter.
SECCOMP_RET_KILL actions are always logged, when "kill" is in the
actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged,
regardless of this flag.
This flag can be used to create noisy filters that result in all
non-allowed actions to be logged. A process may have one noisy filter,
which is loaded with this flag, as well as a quiet filter that's not
loaded with this flag. This allows for the actions in a set of filters
to be selectively conveyed to the admin.
Since a system could have a large number of allocated seccomp_filter
structs, struct packing was taken in consideration. On 64 bit x86, the
new log member takes up one byte of an existing four byte hole in the
struct. On 32 bit x86, the new log member creates a new four byte hole
(unavoidable) and consumes one of those bytes.
Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not
capable of inspecting the audit log to verify that the actions taken in
the filter were logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
|
|
|
* @log: true if all actions except for SECCOMP_RET_ALLOW should be logged
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
* @prev: points to a previously installed, or inherited, filter
|
2016-09-20 17:39:47 +00:00
|
|
|
* @prog: the BPF program to evaluate
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
* @notif: the struct that holds all notification related information
|
|
|
|
* @notify_lock: A lock for all notification-related accesses.
|
2020-06-01 18:50:07 +00:00
|
|
|
* @wqh: A wait queue for poll if a notifier is in use.
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
*
|
|
|
|
* seccomp_filter objects are organized in a tree linked via the @prev
|
|
|
|
* pointer. For any task, it appears to be a singly-linked list starting
|
|
|
|
* with current->seccomp.filter, the most recently attached or inherited filter.
|
|
|
|
* However, multiple filters may share a @prev node, by way of fork(), which
|
|
|
|
* results in a unidirectional tree existing in memory. This is similar to
|
|
|
|
* how namespaces work.
|
|
|
|
*
|
|
|
|
* seccomp_filter objects should never be modified after being attached
|
2020-05-31 11:50:28 +00:00
|
|
|
* to a task_struct (other than @refs).
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
*/
|
|
|
|
struct seccomp_filter {
|
2020-05-31 11:50:28 +00:00
|
|
|
refcount_t refs;
|
2020-05-31 11:50:30 +00:00
|
|
|
refcount_t users;
|
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for
all actions except for SECCOMP_RET_ALLOW for the given filter.
SECCOMP_RET_KILL actions are always logged, when "kill" is in the
actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged,
regardless of this flag.
This flag can be used to create noisy filters that result in all
non-allowed actions to be logged. A process may have one noisy filter,
which is loaded with this flag, as well as a quiet filter that's not
loaded with this flag. This allows for the actions in a set of filters
to be selectively conveyed to the admin.
Since a system could have a large number of allocated seccomp_filter
structs, struct packing was taken in consideration. On 64 bit x86, the
new log member takes up one byte of an existing four byte hole in the
struct. On 32 bit x86, the new log member creates a new four byte hole
(unavoidable) and consumes one of those bytes.
Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not
capable of inspecting the audit log to verify that the actions taken in
the filter were logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
|
|
|
bool log;
|
2020-10-11 15:47:43 +00:00
|
|
|
struct action_cache cache;
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
struct seccomp_filter *prev;
|
net: filter: split 'struct sk_filter' into socket and bpf parts
clean up names related to socket filtering and bpf in the following way:
- everything that deals with sockets keeps 'sk_*' prefix
- everything that is pure BPF is changed to 'bpf_*' prefix
split 'struct sk_filter' into
struct sk_filter {
atomic_t refcnt;
struct rcu_head rcu;
struct bpf_prog *prog;
};
and
struct bpf_prog {
u32 jited:1,
len:31;
struct sock_fprog_kern *orig_prog;
unsigned int (*bpf_func)(const struct sk_buff *skb,
const struct bpf_insn *filter);
union {
struct sock_filter insns[0];
struct bpf_insn insnsi[0];
struct work_struct work;
};
};
so that 'struct bpf_prog' can be used independent of sockets and cleans up
'unattached' bpf use cases
split SK_RUN_FILTER macro into:
SK_RUN_FILTER to be used with 'struct sk_filter *' and
BPF_PROG_RUN to be used with 'struct bpf_prog *'
__sk_filter_release(struct sk_filter *) gains
__bpf_prog_release(struct bpf_prog *) helper function
also perform related renames for the functions that work
with 'struct bpf_prog *', since they're on the same lines:
sk_filter_size -> bpf_prog_size
sk_filter_select_runtime -> bpf_prog_select_runtime
sk_filter_free -> bpf_prog_free
sk_unattached_filter_create -> bpf_prog_create
sk_unattached_filter_destroy -> bpf_prog_destroy
sk_store_orig_filter -> bpf_prog_store_orig_filter
sk_release_orig_filter -> bpf_release_orig_filter
__sk_migrate_filter -> bpf_migrate_filter
__sk_prepare_filter -> bpf_prepare_filter
API for attaching classic BPF to a socket stays the same:
sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *)
and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program
which is used by sockets, tun, af_packet
API for 'unattached' BPF programs becomes:
bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *)
and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program
which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31 03:34:16 +00:00
|
|
|
struct bpf_prog *prog;
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
struct notification *notif;
|
|
|
|
struct mutex notify_lock;
|
2020-06-01 18:50:07 +00:00
|
|
|
wait_queue_head_t wqh;
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
/* Limit any path through the tree to 256KB worth of instructions. */
|
|
|
|
#define MAX_INSNS_PER_PATH ((1 << 18) / sizeof(struct sock_filter))
|
|
|
|
|
net: filter: rework/optimize internal BPF interpreter's instruction set
This patch replaces/reworks the kernel-internal BPF interpreter with
an optimized BPF instruction set format that is modelled closer to
mimic native instruction sets and is designed to be JITed with one to
one mapping. Thus, the new interpreter is noticeably faster than the
current implementation of sk_run_filter(); mainly for two reasons:
1. Fall-through jumps:
BPF jump instructions are forced to go either 'true' or 'false'
branch which causes branch-miss penalty. The new BPF jump
instructions have only one branch and fall-through otherwise,
which fits the CPU branch predictor logic better. `perf stat`
shows drastic difference for branch-misses between the old and
new code.
2. Jump-threaded implementation of interpreter vs switch
statement:
Instead of single table-jump at the top of 'switch' statement,
gcc will now generate multiple table-jump instructions, which
helps CPU branch predictor logic.
Note that the verification of filters is still being done through
sk_chk_filter() in classical BPF format, so filters from user- or
kernel space are verified in the same way as we do now, and same
restrictions/constraints hold as well.
We reuse current BPF JIT compilers in a way that this upgrade would
even be fine as is, but nevertheless allows for a successive upgrade
of BPF JIT compilers to the new format.
The internal instruction set migration is being done after the
probing for JIT compilation, so in case JIT compilers are able to
create a native opcode image, we're going to use that, and in all
other cases we're doing a follow-up migration of the BPF program's
instruction set, so that it can be transparently run in the new
interpreter.
In short, the *internal* format extends BPF in the following way (more
details can be taken from the appended documentation):
- Number of registers increase from 2 to 10
- Register width increases from 32-bit to 64-bit
- Conditional jt/jf targets replaced with jt/fall-through
- Adds signed > and >= insns
- 16 4-byte stack slots for register spill-fill replaced
with up to 512 bytes of multi-use stack space
- Introduction of bpf_call insn and register passing convention
for zero overhead calls from/to other kernel functions
- Adds arithmetic right shift and endianness conversion insns
- Adds atomic_add insn
- Old tax/txa insns are replaced with 'mov dst,src' insn
Performance of two BPF filters generated by libpcap resp. bpf_asm
was measured on x86_64, i386 and arm32 (other libpcap programs
have similar performance differences):
fprog #1 is taken from Documentation/networking/filter.txt:
tcpdump -i eth0 port 22 -dd
fprog #2 is taken from 'man tcpdump':
tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) -
((tcp[12]&0xf0)>>2)) != 0)' -dd
Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the
same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call,
smaller is better:
--x86_64--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 90 101 192 202
new BPF 31 71 47 97
old BPF jit 12 34 17 44
new BPF jit TBD
--i386--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 107 136 227 252
new BPF 40 119 69 172
--arm32--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 202 300 475 540
new BPF 180 270 330 470
old BPF jit 26 182 37 202
new BPF jit TBD
Thus, without changing any userland BPF filters, applications on
top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf
classifier, netfilter's xt_bpf, team driver's load-balancing mode,
and many more will have better interpreter filtering performance.
While we are replacing the internal BPF interpreter, we also need
to convert seccomp BPF in the same step to make use of the new
internal structure since it makes use of lower-level API details
without being further decoupled through higher-level calls like
sk_unattached_filter_{create,destroy}(), for example.
Just as for normal socket filtering, also seccomp BPF experiences
a time-to-verdict speedup:
05-sim-long_jumps.c of libseccomp was used as micro-benchmark:
seccomp_rule_add_exact(ctx,...
seccomp_rule_add_exact(ctx,...
rc = seccomp_load(ctx);
for (i = 0; i < 10000000; i++)
syscall(199, 100);
'short filter' has 2 rules
'large filter' has 200 rules
'short filter' performance is slightly better on x86_64/i386/arm32
'large filter' is much faster on x86_64 and i386 and shows no
difference on arm32
--x86_64-- short filter
old BPF: 2.7 sec
39.12% bench libc-2.15.so [.] syscall
8.10% bench [kernel.kallsyms] [k] sk_run_filter
6.31% bench [kernel.kallsyms] [k] system_call
5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller
3.70% bench [kernel.kallsyms] [k] __secure_computing
3.67% bench [kernel.kallsyms] [k] lock_is_held
3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load
new BPF: 2.58 sec
42.05% bench libc-2.15.so [.] syscall
6.91% bench [kernel.kallsyms] [k] system_call
6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
6.07% bench [kernel.kallsyms] [k] __secure_computing
5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
--arm32-- short filter
old BPF: 4.0 sec
39.92% bench [kernel.kallsyms] [k] vector_swi
16.60% bench [kernel.kallsyms] [k] sk_run_filter
14.66% bench libc-2.17.so [.] syscall
5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load
5.10% bench [kernel.kallsyms] [k] __secure_computing
new BPF: 3.7 sec
35.93% bench [kernel.kallsyms] [k] vector_swi
21.89% bench libc-2.17.so [.] syscall
13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
6.25% bench [kernel.kallsyms] [k] __secure_computing
3.96% bench [kernel.kallsyms] [k] syscall_trace_exit
--x86_64-- large filter
old BPF: 8.6 seconds
73.38% bench [kernel.kallsyms] [k] sk_run_filter
10.70% bench libc-2.15.so [.] syscall
5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.97% bench [kernel.kallsyms] [k] system_call
new BPF: 5.7 seconds
66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
16.75% bench libc-2.15.so [.] syscall
3.31% bench [kernel.kallsyms] [k] system_call
2.88% bench [kernel.kallsyms] [k] __secure_computing
--i386-- large filter
old BPF: 5.4 sec
new BPF: 3.8 sec
--arm32-- large filter
old BPF: 13.5 sec
73.88% bench [kernel.kallsyms] [k] sk_run_filter
10.29% bench [kernel.kallsyms] [k] vector_swi
6.46% bench libc-2.17.so [.] syscall
2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.19% bench [kernel.kallsyms] [k] __secure_computing
0.87% bench [kernel.kallsyms] [k] sys_getuid
new BPF: 13.5 sec
76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
10.98% bench [kernel.kallsyms] [k] vector_swi
5.87% bench libc-2.17.so [.] syscall
1.77% bench [kernel.kallsyms] [k] __secure_computing
0.93% bench [kernel.kallsyms] [k] sys_getuid
BPF filters generated by seccomp are very branchy, so the new
internal BPF performance is better than the old one. Performance
gains will be even higher when BPF JIT is committed for the
new structure, which is planned in future work (as successive
JIT migrations).
BPF has also been stress-tested with trinity's BPF fuzzer.
Joint work with Daniel Borkmann.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Moore <pmoore@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
|
|
|
/*
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
* Endianness is explicitly ignored and left for BPF program authors to manage
|
|
|
|
* as per the specific architecture.
|
|
|
|
*/
|
net: filter: rework/optimize internal BPF interpreter's instruction set
This patch replaces/reworks the kernel-internal BPF interpreter with
an optimized BPF instruction set format that is modelled closer to
mimic native instruction sets and is designed to be JITed with one to
one mapping. Thus, the new interpreter is noticeably faster than the
current implementation of sk_run_filter(); mainly for two reasons:
1. Fall-through jumps:
BPF jump instructions are forced to go either 'true' or 'false'
branch which causes branch-miss penalty. The new BPF jump
instructions have only one branch and fall-through otherwise,
which fits the CPU branch predictor logic better. `perf stat`
shows drastic difference for branch-misses between the old and
new code.
2. Jump-threaded implementation of interpreter vs switch
statement:
Instead of single table-jump at the top of 'switch' statement,
gcc will now generate multiple table-jump instructions, which
helps CPU branch predictor logic.
Note that the verification of filters is still being done through
sk_chk_filter() in classical BPF format, so filters from user- or
kernel space are verified in the same way as we do now, and same
restrictions/constraints hold as well.
We reuse current BPF JIT compilers in a way that this upgrade would
even be fine as is, but nevertheless allows for a successive upgrade
of BPF JIT compilers to the new format.
The internal instruction set migration is being done after the
probing for JIT compilation, so in case JIT compilers are able to
create a native opcode image, we're going to use that, and in all
other cases we're doing a follow-up migration of the BPF program's
instruction set, so that it can be transparently run in the new
interpreter.
In short, the *internal* format extends BPF in the following way (more
details can be taken from the appended documentation):
- Number of registers increase from 2 to 10
- Register width increases from 32-bit to 64-bit
- Conditional jt/jf targets replaced with jt/fall-through
- Adds signed > and >= insns
- 16 4-byte stack slots for register spill-fill replaced
with up to 512 bytes of multi-use stack space
- Introduction of bpf_call insn and register passing convention
for zero overhead calls from/to other kernel functions
- Adds arithmetic right shift and endianness conversion insns
- Adds atomic_add insn
- Old tax/txa insns are replaced with 'mov dst,src' insn
Performance of two BPF filters generated by libpcap resp. bpf_asm
was measured on x86_64, i386 and arm32 (other libpcap programs
have similar performance differences):
fprog #1 is taken from Documentation/networking/filter.txt:
tcpdump -i eth0 port 22 -dd
fprog #2 is taken from 'man tcpdump':
tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) -
((tcp[12]&0xf0)>>2)) != 0)' -dd
Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the
same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call,
smaller is better:
--x86_64--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 90 101 192 202
new BPF 31 71 47 97
old BPF jit 12 34 17 44
new BPF jit TBD
--i386--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 107 136 227 252
new BPF 40 119 69 172
--arm32--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 202 300 475 540
new BPF 180 270 330 470
old BPF jit 26 182 37 202
new BPF jit TBD
Thus, without changing any userland BPF filters, applications on
top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf
classifier, netfilter's xt_bpf, team driver's load-balancing mode,
and many more will have better interpreter filtering performance.
While we are replacing the internal BPF interpreter, we also need
to convert seccomp BPF in the same step to make use of the new
internal structure since it makes use of lower-level API details
without being further decoupled through higher-level calls like
sk_unattached_filter_{create,destroy}(), for example.
Just as for normal socket filtering, also seccomp BPF experiences
a time-to-verdict speedup:
05-sim-long_jumps.c of libseccomp was used as micro-benchmark:
seccomp_rule_add_exact(ctx,...
seccomp_rule_add_exact(ctx,...
rc = seccomp_load(ctx);
for (i = 0; i < 10000000; i++)
syscall(199, 100);
'short filter' has 2 rules
'large filter' has 200 rules
'short filter' performance is slightly better on x86_64/i386/arm32
'large filter' is much faster on x86_64 and i386 and shows no
difference on arm32
--x86_64-- short filter
old BPF: 2.7 sec
39.12% bench libc-2.15.so [.] syscall
8.10% bench [kernel.kallsyms] [k] sk_run_filter
6.31% bench [kernel.kallsyms] [k] system_call
5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller
3.70% bench [kernel.kallsyms] [k] __secure_computing
3.67% bench [kernel.kallsyms] [k] lock_is_held
3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load
new BPF: 2.58 sec
42.05% bench libc-2.15.so [.] syscall
6.91% bench [kernel.kallsyms] [k] system_call
6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
6.07% bench [kernel.kallsyms] [k] __secure_computing
5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
--arm32-- short filter
old BPF: 4.0 sec
39.92% bench [kernel.kallsyms] [k] vector_swi
16.60% bench [kernel.kallsyms] [k] sk_run_filter
14.66% bench libc-2.17.so [.] syscall
5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load
5.10% bench [kernel.kallsyms] [k] __secure_computing
new BPF: 3.7 sec
35.93% bench [kernel.kallsyms] [k] vector_swi
21.89% bench libc-2.17.so [.] syscall
13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
6.25% bench [kernel.kallsyms] [k] __secure_computing
3.96% bench [kernel.kallsyms] [k] syscall_trace_exit
--x86_64-- large filter
old BPF: 8.6 seconds
73.38% bench [kernel.kallsyms] [k] sk_run_filter
10.70% bench libc-2.15.so [.] syscall
5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.97% bench [kernel.kallsyms] [k] system_call
new BPF: 5.7 seconds
66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
16.75% bench libc-2.15.so [.] syscall
3.31% bench [kernel.kallsyms] [k] system_call
2.88% bench [kernel.kallsyms] [k] __secure_computing
--i386-- large filter
old BPF: 5.4 sec
new BPF: 3.8 sec
--arm32-- large filter
old BPF: 13.5 sec
73.88% bench [kernel.kallsyms] [k] sk_run_filter
10.29% bench [kernel.kallsyms] [k] vector_swi
6.46% bench libc-2.17.so [.] syscall
2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.19% bench [kernel.kallsyms] [k] __secure_computing
0.87% bench [kernel.kallsyms] [k] sys_getuid
new BPF: 13.5 sec
76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
10.98% bench [kernel.kallsyms] [k] vector_swi
5.87% bench libc-2.17.so [.] syscall
1.77% bench [kernel.kallsyms] [k] __secure_computing
0.93% bench [kernel.kallsyms] [k] sys_getuid
BPF filters generated by seccomp are very branchy, so the new
internal BPF performance is better than the old one. Performance
gains will be even higher when BPF JIT is committed for the
new structure, which is planned in future work (as successive
JIT migrations).
BPF has also been stress-tested with trinity's BPF fuzzer.
Joint work with Daniel Borkmann.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Moore <pmoore@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
|
|
|
static void populate_seccomp_data(struct seccomp_data *sd)
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
{
|
2020-08-24 12:59:21 +00:00
|
|
|
/*
|
|
|
|
* Instead of using current_pt_reg(), we're already doing the work
|
|
|
|
* to safely fetch "current", so just use "task" everywhere below.
|
|
|
|
*/
|
net: filter: rework/optimize internal BPF interpreter's instruction set
This patch replaces/reworks the kernel-internal BPF interpreter with
an optimized BPF instruction set format that is modelled closer to
mimic native instruction sets and is designed to be JITed with one to
one mapping. Thus, the new interpreter is noticeably faster than the
current implementation of sk_run_filter(); mainly for two reasons:
1. Fall-through jumps:
BPF jump instructions are forced to go either 'true' or 'false'
branch which causes branch-miss penalty. The new BPF jump
instructions have only one branch and fall-through otherwise,
which fits the CPU branch predictor logic better. `perf stat`
shows drastic difference for branch-misses between the old and
new code.
2. Jump-threaded implementation of interpreter vs switch
statement:
Instead of single table-jump at the top of 'switch' statement,
gcc will now generate multiple table-jump instructions, which
helps CPU branch predictor logic.
Note that the verification of filters is still being done through
sk_chk_filter() in classical BPF format, so filters from user- or
kernel space are verified in the same way as we do now, and same
restrictions/constraints hold as well.
We reuse current BPF JIT compilers in a way that this upgrade would
even be fine as is, but nevertheless allows for a successive upgrade
of BPF JIT compilers to the new format.
The internal instruction set migration is being done after the
probing for JIT compilation, so in case JIT compilers are able to
create a native opcode image, we're going to use that, and in all
other cases we're doing a follow-up migration of the BPF program's
instruction set, so that it can be transparently run in the new
interpreter.
In short, the *internal* format extends BPF in the following way (more
details can be taken from the appended documentation):
- Number of registers increase from 2 to 10
- Register width increases from 32-bit to 64-bit
- Conditional jt/jf targets replaced with jt/fall-through
- Adds signed > and >= insns
- 16 4-byte stack slots for register spill-fill replaced
with up to 512 bytes of multi-use stack space
- Introduction of bpf_call insn and register passing convention
for zero overhead calls from/to other kernel functions
- Adds arithmetic right shift and endianness conversion insns
- Adds atomic_add insn
- Old tax/txa insns are replaced with 'mov dst,src' insn
Performance of two BPF filters generated by libpcap resp. bpf_asm
was measured on x86_64, i386 and arm32 (other libpcap programs
have similar performance differences):
fprog #1 is taken from Documentation/networking/filter.txt:
tcpdump -i eth0 port 22 -dd
fprog #2 is taken from 'man tcpdump':
tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) -
((tcp[12]&0xf0)>>2)) != 0)' -dd
Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the
same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call,
smaller is better:
--x86_64--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 90 101 192 202
new BPF 31 71 47 97
old BPF jit 12 34 17 44
new BPF jit TBD
--i386--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 107 136 227 252
new BPF 40 119 69 172
--arm32--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 202 300 475 540
new BPF 180 270 330 470
old BPF jit 26 182 37 202
new BPF jit TBD
Thus, without changing any userland BPF filters, applications on
top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf
classifier, netfilter's xt_bpf, team driver's load-balancing mode,
and many more will have better interpreter filtering performance.
While we are replacing the internal BPF interpreter, we also need
to convert seccomp BPF in the same step to make use of the new
internal structure since it makes use of lower-level API details
without being further decoupled through higher-level calls like
sk_unattached_filter_{create,destroy}(), for example.
Just as for normal socket filtering, also seccomp BPF experiences
a time-to-verdict speedup:
05-sim-long_jumps.c of libseccomp was used as micro-benchmark:
seccomp_rule_add_exact(ctx,...
seccomp_rule_add_exact(ctx,...
rc = seccomp_load(ctx);
for (i = 0; i < 10000000; i++)
syscall(199, 100);
'short filter' has 2 rules
'large filter' has 200 rules
'short filter' performance is slightly better on x86_64/i386/arm32
'large filter' is much faster on x86_64 and i386 and shows no
difference on arm32
--x86_64-- short filter
old BPF: 2.7 sec
39.12% bench libc-2.15.so [.] syscall
8.10% bench [kernel.kallsyms] [k] sk_run_filter
6.31% bench [kernel.kallsyms] [k] system_call
5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller
3.70% bench [kernel.kallsyms] [k] __secure_computing
3.67% bench [kernel.kallsyms] [k] lock_is_held
3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load
new BPF: 2.58 sec
42.05% bench libc-2.15.so [.] syscall
6.91% bench [kernel.kallsyms] [k] system_call
6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
6.07% bench [kernel.kallsyms] [k] __secure_computing
5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
--arm32-- short filter
old BPF: 4.0 sec
39.92% bench [kernel.kallsyms] [k] vector_swi
16.60% bench [kernel.kallsyms] [k] sk_run_filter
14.66% bench libc-2.17.so [.] syscall
5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load
5.10% bench [kernel.kallsyms] [k] __secure_computing
new BPF: 3.7 sec
35.93% bench [kernel.kallsyms] [k] vector_swi
21.89% bench libc-2.17.so [.] syscall
13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
6.25% bench [kernel.kallsyms] [k] __secure_computing
3.96% bench [kernel.kallsyms] [k] syscall_trace_exit
--x86_64-- large filter
old BPF: 8.6 seconds
73.38% bench [kernel.kallsyms] [k] sk_run_filter
10.70% bench libc-2.15.so [.] syscall
5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.97% bench [kernel.kallsyms] [k] system_call
new BPF: 5.7 seconds
66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
16.75% bench libc-2.15.so [.] syscall
3.31% bench [kernel.kallsyms] [k] system_call
2.88% bench [kernel.kallsyms] [k] __secure_computing
--i386-- large filter
old BPF: 5.4 sec
new BPF: 3.8 sec
--arm32-- large filter
old BPF: 13.5 sec
73.88% bench [kernel.kallsyms] [k] sk_run_filter
10.29% bench [kernel.kallsyms] [k] vector_swi
6.46% bench libc-2.17.so [.] syscall
2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.19% bench [kernel.kallsyms] [k] __secure_computing
0.87% bench [kernel.kallsyms] [k] sys_getuid
new BPF: 13.5 sec
76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
10.98% bench [kernel.kallsyms] [k] vector_swi
5.87% bench libc-2.17.so [.] syscall
1.77% bench [kernel.kallsyms] [k] __secure_computing
0.93% bench [kernel.kallsyms] [k] sys_getuid
BPF filters generated by seccomp are very branchy, so the new
internal BPF performance is better than the old one. Performance
gains will be even higher when BPF JIT is committed for the
new structure, which is planned in future work (as successive
JIT migrations).
BPF has also been stress-tested with trinity's BPF fuzzer.
Joint work with Daniel Borkmann.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Moore <pmoore@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
|
|
|
struct task_struct *task = current;
|
|
|
|
struct pt_regs *regs = task_pt_regs(task);
|
seccomp: fix populating a0-a5 syscall args in 32-bit x86 BPF
Linus reports that on 32-bit x86 Chromium throws the following seccomp
resp. audit log messages:
audit: type=1326 audit(1397359304.356:28108): auid=500 uid=500
gid=500 ses=2 subj=unconfined_u:unconfined_r:chrome_sandbox_t:s0-s0:c0.c1023
pid=3677 comm="chrome" exe="/opt/google/chrome/chrome" sig=0
syscall=172 compat=0 ip=0xb2dd9852 code=0x30000
audit: type=1326 audit(1397359304.356:28109): auid=500 uid=500
gid=500 ses=2 subj=unconfined_u:unconfined_r:chrome_sandbox_t:s0-s0:c0.c1023
pid=3677 comm="chrome" exe="/opt/google/chrome/chrome" sig=0 syscall=5
compat=0 ip=0xb2dd9852 code=0x50000
These audit messages are being triggered via audit_seccomp() through
__secure_computing() in seccomp mode (BPF) filter with seccomp return
codes 0x30000 (== SECCOMP_RET_TRAP) and 0x50000 (== SECCOMP_RET_ERRNO)
during filter runtime. Moreover, Linus reports that x86_64 Chromium
seems fine.
The underlying issue that explains this is that the implementation of
populate_seccomp_data() is wrong. Our seccomp data structure sd that
is being shared with user ABI is:
struct seccomp_data {
int nr;
__u32 arch;
__u64 instruction_pointer;
__u64 args[6];
};
Therefore, a simple cast to 'unsigned long *' for storing the value of
the syscall argument via syscall_get_arguments() is just wrong as on
32-bit x86 (or any other 32bit arch), it would result in storing a0-a5
at wrong offsets in args[] member, and thus i) could leak stack memory
to user space and ii) tampers with the logic of seccomp BPF programs
that read out and check for syscall arguments:
syscall_get_arguments(task, regs, 0, 1, (unsigned long *) &sd->args[0]);
Tested on 32-bit x86 with Google Chrome, unfortunately only via remote
test machine through slow ssh X forwarding, but it fixes the issue on
my side. So fix it up by storing args in type correct variables, gcc
is clever and optimizes the copy away in other cases, e.g. x86_64.
Fixes: bd4cf0ed331a ("net: filter: rework/optimize internal BPF interpreter's instruction set")
Reported-and-bisected-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14 19:02:59 +00:00
|
|
|
unsigned long args[6];
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
|
net: filter: rework/optimize internal BPF interpreter's instruction set
This patch replaces/reworks the kernel-internal BPF interpreter with
an optimized BPF instruction set format that is modelled closer to
mimic native instruction sets and is designed to be JITed with one to
one mapping. Thus, the new interpreter is noticeably faster than the
current implementation of sk_run_filter(); mainly for two reasons:
1. Fall-through jumps:
BPF jump instructions are forced to go either 'true' or 'false'
branch which causes branch-miss penalty. The new BPF jump
instructions have only one branch and fall-through otherwise,
which fits the CPU branch predictor logic better. `perf stat`
shows drastic difference for branch-misses between the old and
new code.
2. Jump-threaded implementation of interpreter vs switch
statement:
Instead of single table-jump at the top of 'switch' statement,
gcc will now generate multiple table-jump instructions, which
helps CPU branch predictor logic.
Note that the verification of filters is still being done through
sk_chk_filter() in classical BPF format, so filters from user- or
kernel space are verified in the same way as we do now, and same
restrictions/constraints hold as well.
We reuse current BPF JIT compilers in a way that this upgrade would
even be fine as is, but nevertheless allows for a successive upgrade
of BPF JIT compilers to the new format.
The internal instruction set migration is being done after the
probing for JIT compilation, so in case JIT compilers are able to
create a native opcode image, we're going to use that, and in all
other cases we're doing a follow-up migration of the BPF program's
instruction set, so that it can be transparently run in the new
interpreter.
In short, the *internal* format extends BPF in the following way (more
details can be taken from the appended documentation):
- Number of registers increase from 2 to 10
- Register width increases from 32-bit to 64-bit
- Conditional jt/jf targets replaced with jt/fall-through
- Adds signed > and >= insns
- 16 4-byte stack slots for register spill-fill replaced
with up to 512 bytes of multi-use stack space
- Introduction of bpf_call insn and register passing convention
for zero overhead calls from/to other kernel functions
- Adds arithmetic right shift and endianness conversion insns
- Adds atomic_add insn
- Old tax/txa insns are replaced with 'mov dst,src' insn
Performance of two BPF filters generated by libpcap resp. bpf_asm
was measured on x86_64, i386 and arm32 (other libpcap programs
have similar performance differences):
fprog #1 is taken from Documentation/networking/filter.txt:
tcpdump -i eth0 port 22 -dd
fprog #2 is taken from 'man tcpdump':
tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) -
((tcp[12]&0xf0)>>2)) != 0)' -dd
Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the
same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call,
smaller is better:
--x86_64--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 90 101 192 202
new BPF 31 71 47 97
old BPF jit 12 34 17 44
new BPF jit TBD
--i386--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 107 136 227 252
new BPF 40 119 69 172
--arm32--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 202 300 475 540
new BPF 180 270 330 470
old BPF jit 26 182 37 202
new BPF jit TBD
Thus, without changing any userland BPF filters, applications on
top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf
classifier, netfilter's xt_bpf, team driver's load-balancing mode,
and many more will have better interpreter filtering performance.
While we are replacing the internal BPF interpreter, we also need
to convert seccomp BPF in the same step to make use of the new
internal structure since it makes use of lower-level API details
without being further decoupled through higher-level calls like
sk_unattached_filter_{create,destroy}(), for example.
Just as for normal socket filtering, also seccomp BPF experiences
a time-to-verdict speedup:
05-sim-long_jumps.c of libseccomp was used as micro-benchmark:
seccomp_rule_add_exact(ctx,...
seccomp_rule_add_exact(ctx,...
rc = seccomp_load(ctx);
for (i = 0; i < 10000000; i++)
syscall(199, 100);
'short filter' has 2 rules
'large filter' has 200 rules
'short filter' performance is slightly better on x86_64/i386/arm32
'large filter' is much faster on x86_64 and i386 and shows no
difference on arm32
--x86_64-- short filter
old BPF: 2.7 sec
39.12% bench libc-2.15.so [.] syscall
8.10% bench [kernel.kallsyms] [k] sk_run_filter
6.31% bench [kernel.kallsyms] [k] system_call
5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller
3.70% bench [kernel.kallsyms] [k] __secure_computing
3.67% bench [kernel.kallsyms] [k] lock_is_held
3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load
new BPF: 2.58 sec
42.05% bench libc-2.15.so [.] syscall
6.91% bench [kernel.kallsyms] [k] system_call
6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
6.07% bench [kernel.kallsyms] [k] __secure_computing
5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
--arm32-- short filter
old BPF: 4.0 sec
39.92% bench [kernel.kallsyms] [k] vector_swi
16.60% bench [kernel.kallsyms] [k] sk_run_filter
14.66% bench libc-2.17.so [.] syscall
5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load
5.10% bench [kernel.kallsyms] [k] __secure_computing
new BPF: 3.7 sec
35.93% bench [kernel.kallsyms] [k] vector_swi
21.89% bench libc-2.17.so [.] syscall
13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
6.25% bench [kernel.kallsyms] [k] __secure_computing
3.96% bench [kernel.kallsyms] [k] syscall_trace_exit
--x86_64-- large filter
old BPF: 8.6 seconds
73.38% bench [kernel.kallsyms] [k] sk_run_filter
10.70% bench libc-2.15.so [.] syscall
5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.97% bench [kernel.kallsyms] [k] system_call
new BPF: 5.7 seconds
66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
16.75% bench libc-2.15.so [.] syscall
3.31% bench [kernel.kallsyms] [k] system_call
2.88% bench [kernel.kallsyms] [k] __secure_computing
--i386-- large filter
old BPF: 5.4 sec
new BPF: 3.8 sec
--arm32-- large filter
old BPF: 13.5 sec
73.88% bench [kernel.kallsyms] [k] sk_run_filter
10.29% bench [kernel.kallsyms] [k] vector_swi
6.46% bench libc-2.17.so [.] syscall
2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.19% bench [kernel.kallsyms] [k] __secure_computing
0.87% bench [kernel.kallsyms] [k] sys_getuid
new BPF: 13.5 sec
76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
10.98% bench [kernel.kallsyms] [k] vector_swi
5.87% bench libc-2.17.so [.] syscall
1.77% bench [kernel.kallsyms] [k] __secure_computing
0.93% bench [kernel.kallsyms] [k] sys_getuid
BPF filters generated by seccomp are very branchy, so the new
internal BPF performance is better than the old one. Performance
gains will be even higher when BPF JIT is committed for the
new structure, which is planned in future work (as successive
JIT migrations).
BPF has also been stress-tested with trinity's BPF fuzzer.
Joint work with Daniel Borkmann.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Moore <pmoore@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
|
|
|
sd->nr = syscall_get_nr(task, regs);
|
2019-03-17 23:30:18 +00:00
|
|
|
sd->arch = syscall_get_arch(task);
|
2016-11-07 21:26:37 +00:00
|
|
|
syscall_get_arguments(task, regs, args);
|
seccomp: fix populating a0-a5 syscall args in 32-bit x86 BPF
Linus reports that on 32-bit x86 Chromium throws the following seccomp
resp. audit log messages:
audit: type=1326 audit(1397359304.356:28108): auid=500 uid=500
gid=500 ses=2 subj=unconfined_u:unconfined_r:chrome_sandbox_t:s0-s0:c0.c1023
pid=3677 comm="chrome" exe="/opt/google/chrome/chrome" sig=0
syscall=172 compat=0 ip=0xb2dd9852 code=0x30000
audit: type=1326 audit(1397359304.356:28109): auid=500 uid=500
gid=500 ses=2 subj=unconfined_u:unconfined_r:chrome_sandbox_t:s0-s0:c0.c1023
pid=3677 comm="chrome" exe="/opt/google/chrome/chrome" sig=0 syscall=5
compat=0 ip=0xb2dd9852 code=0x50000
These audit messages are being triggered via audit_seccomp() through
__secure_computing() in seccomp mode (BPF) filter with seccomp return
codes 0x30000 (== SECCOMP_RET_TRAP) and 0x50000 (== SECCOMP_RET_ERRNO)
during filter runtime. Moreover, Linus reports that x86_64 Chromium
seems fine.
The underlying issue that explains this is that the implementation of
populate_seccomp_data() is wrong. Our seccomp data structure sd that
is being shared with user ABI is:
struct seccomp_data {
int nr;
__u32 arch;
__u64 instruction_pointer;
__u64 args[6];
};
Therefore, a simple cast to 'unsigned long *' for storing the value of
the syscall argument via syscall_get_arguments() is just wrong as on
32-bit x86 (or any other 32bit arch), it would result in storing a0-a5
at wrong offsets in args[] member, and thus i) could leak stack memory
to user space and ii) tampers with the logic of seccomp BPF programs
that read out and check for syscall arguments:
syscall_get_arguments(task, regs, 0, 1, (unsigned long *) &sd->args[0]);
Tested on 32-bit x86 with Google Chrome, unfortunately only via remote
test machine through slow ssh X forwarding, but it fixes the issue on
my side. So fix it up by storing args in type correct variables, gcc
is clever and optimizes the copy away in other cases, e.g. x86_64.
Fixes: bd4cf0ed331a ("net: filter: rework/optimize internal BPF interpreter's instruction set")
Reported-and-bisected-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14 19:02:59 +00:00
|
|
|
sd->args[0] = args[0];
|
|
|
|
sd->args[1] = args[1];
|
|
|
|
sd->args[2] = args[2];
|
|
|
|
sd->args[3] = args[3];
|
|
|
|
sd->args[4] = args[4];
|
|
|
|
sd->args[5] = args[5];
|
net: filter: rework/optimize internal BPF interpreter's instruction set
This patch replaces/reworks the kernel-internal BPF interpreter with
an optimized BPF instruction set format that is modelled closer to
mimic native instruction sets and is designed to be JITed with one to
one mapping. Thus, the new interpreter is noticeably faster than the
current implementation of sk_run_filter(); mainly for two reasons:
1. Fall-through jumps:
BPF jump instructions are forced to go either 'true' or 'false'
branch which causes branch-miss penalty. The new BPF jump
instructions have only one branch and fall-through otherwise,
which fits the CPU branch predictor logic better. `perf stat`
shows drastic difference for branch-misses between the old and
new code.
2. Jump-threaded implementation of interpreter vs switch
statement:
Instead of single table-jump at the top of 'switch' statement,
gcc will now generate multiple table-jump instructions, which
helps CPU branch predictor logic.
Note that the verification of filters is still being done through
sk_chk_filter() in classical BPF format, so filters from user- or
kernel space are verified in the same way as we do now, and same
restrictions/constraints hold as well.
We reuse current BPF JIT compilers in a way that this upgrade would
even be fine as is, but nevertheless allows for a successive upgrade
of BPF JIT compilers to the new format.
The internal instruction set migration is being done after the
probing for JIT compilation, so in case JIT compilers are able to
create a native opcode image, we're going to use that, and in all
other cases we're doing a follow-up migration of the BPF program's
instruction set, so that it can be transparently run in the new
interpreter.
In short, the *internal* format extends BPF in the following way (more
details can be taken from the appended documentation):
- Number of registers increase from 2 to 10
- Register width increases from 32-bit to 64-bit
- Conditional jt/jf targets replaced with jt/fall-through
- Adds signed > and >= insns
- 16 4-byte stack slots for register spill-fill replaced
with up to 512 bytes of multi-use stack space
- Introduction of bpf_call insn and register passing convention
for zero overhead calls from/to other kernel functions
- Adds arithmetic right shift and endianness conversion insns
- Adds atomic_add insn
- Old tax/txa insns are replaced with 'mov dst,src' insn
Performance of two BPF filters generated by libpcap resp. bpf_asm
was measured on x86_64, i386 and arm32 (other libpcap programs
have similar performance differences):
fprog #1 is taken from Documentation/networking/filter.txt:
tcpdump -i eth0 port 22 -dd
fprog #2 is taken from 'man tcpdump':
tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) -
((tcp[12]&0xf0)>>2)) != 0)' -dd
Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the
same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call,
smaller is better:
--x86_64--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 90 101 192 202
new BPF 31 71 47 97
old BPF jit 12 34 17 44
new BPF jit TBD
--i386--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 107 136 227 252
new BPF 40 119 69 172
--arm32--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 202 300 475 540
new BPF 180 270 330 470
old BPF jit 26 182 37 202
new BPF jit TBD
Thus, without changing any userland BPF filters, applications on
top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf
classifier, netfilter's xt_bpf, team driver's load-balancing mode,
and many more will have better interpreter filtering performance.
While we are replacing the internal BPF interpreter, we also need
to convert seccomp BPF in the same step to make use of the new
internal structure since it makes use of lower-level API details
without being further decoupled through higher-level calls like
sk_unattached_filter_{create,destroy}(), for example.
Just as for normal socket filtering, also seccomp BPF experiences
a time-to-verdict speedup:
05-sim-long_jumps.c of libseccomp was used as micro-benchmark:
seccomp_rule_add_exact(ctx,...
seccomp_rule_add_exact(ctx,...
rc = seccomp_load(ctx);
for (i = 0; i < 10000000; i++)
syscall(199, 100);
'short filter' has 2 rules
'large filter' has 200 rules
'short filter' performance is slightly better on x86_64/i386/arm32
'large filter' is much faster on x86_64 and i386 and shows no
difference on arm32
--x86_64-- short filter
old BPF: 2.7 sec
39.12% bench libc-2.15.so [.] syscall
8.10% bench [kernel.kallsyms] [k] sk_run_filter
6.31% bench [kernel.kallsyms] [k] system_call
5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller
3.70% bench [kernel.kallsyms] [k] __secure_computing
3.67% bench [kernel.kallsyms] [k] lock_is_held
3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load
new BPF: 2.58 sec
42.05% bench libc-2.15.so [.] syscall
6.91% bench [kernel.kallsyms] [k] system_call
6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
6.07% bench [kernel.kallsyms] [k] __secure_computing
5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
--arm32-- short filter
old BPF: 4.0 sec
39.92% bench [kernel.kallsyms] [k] vector_swi
16.60% bench [kernel.kallsyms] [k] sk_run_filter
14.66% bench libc-2.17.so [.] syscall
5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load
5.10% bench [kernel.kallsyms] [k] __secure_computing
new BPF: 3.7 sec
35.93% bench [kernel.kallsyms] [k] vector_swi
21.89% bench libc-2.17.so [.] syscall
13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
6.25% bench [kernel.kallsyms] [k] __secure_computing
3.96% bench [kernel.kallsyms] [k] syscall_trace_exit
--x86_64-- large filter
old BPF: 8.6 seconds
73.38% bench [kernel.kallsyms] [k] sk_run_filter
10.70% bench libc-2.15.so [.] syscall
5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.97% bench [kernel.kallsyms] [k] system_call
new BPF: 5.7 seconds
66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
16.75% bench libc-2.15.so [.] syscall
3.31% bench [kernel.kallsyms] [k] system_call
2.88% bench [kernel.kallsyms] [k] __secure_computing
--i386-- large filter
old BPF: 5.4 sec
new BPF: 3.8 sec
--arm32-- large filter
old BPF: 13.5 sec
73.88% bench [kernel.kallsyms] [k] sk_run_filter
10.29% bench [kernel.kallsyms] [k] vector_swi
6.46% bench libc-2.17.so [.] syscall
2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.19% bench [kernel.kallsyms] [k] __secure_computing
0.87% bench [kernel.kallsyms] [k] sys_getuid
new BPF: 13.5 sec
76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
10.98% bench [kernel.kallsyms] [k] vector_swi
5.87% bench libc-2.17.so [.] syscall
1.77% bench [kernel.kallsyms] [k] __secure_computing
0.93% bench [kernel.kallsyms] [k] sys_getuid
BPF filters generated by seccomp are very branchy, so the new
internal BPF performance is better than the old one. Performance
gains will be even higher when BPF JIT is committed for the
new structure, which is planned in future work (as successive
JIT migrations).
BPF has also been stress-tested with trinity's BPF fuzzer.
Joint work with Daniel Borkmann.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Moore <pmoore@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
|
|
|
sd->instruction_pointer = KSTK_EIP(task);
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* seccomp_check_filter - verify seccomp filter code
|
|
|
|
* @filter: filter to verify
|
|
|
|
* @flen: length of filter
|
|
|
|
*
|
2014-07-31 03:34:14 +00:00
|
|
|
* Takes a previously checked filter (by bpf_check_classic) and
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
* redirects all filter code that loads struct sk_buff data
|
|
|
|
* and related data through seccomp_bpf_load. It also
|
|
|
|
* enforces length and alignment checking of those loads.
|
|
|
|
*
|
|
|
|
* Returns 0 if the rule set is legal or -EINVAL if not.
|
|
|
|
*/
|
|
|
|
static int seccomp_check_filter(struct sock_filter *filter, unsigned int flen)
|
|
|
|
{
|
|
|
|
int pc;
|
|
|
|
for (pc = 0; pc < flen; pc++) {
|
|
|
|
struct sock_filter *ftest = &filter[pc];
|
|
|
|
u16 code = ftest->code;
|
|
|
|
u32 k = ftest->k;
|
|
|
|
|
|
|
|
switch (code) {
|
net: filter: get rid of BPF_S_* enum
This patch finally allows us to get rid of the BPF_S_* enum.
Currently, the code performs unnecessary encode and decode
workarounds in seccomp and filter migration itself when a filter
is being attached in order to overcome BPF_S_* encoding which
is not used anymore by the new interpreter resp. JIT compilers.
Keeping it around would mean that also in future we would need
to extend and maintain this enum and related encoders/decoders.
We can get rid of all that and save us these operations during
filter attaching. Naturally, also JIT compilers need to be updated
by this.
Before JIT conversion is being done, each compiler checks if A
is being loaded at startup to obtain information if it needs to
emit instructions to clear A first. Since BPF extensions are a
subset of BPF_LD | BPF_{W,H,B} | BPF_ABS variants, case statements
for extensions can be removed at that point. To ease and minimalize
code changes in the classic JITs, we have introduced bpf_anc_helper().
Tested with test_bpf on x86_64 (JIT, int), s390x (JIT, int),
arm (JIT, int), i368 (int), ppc64 (JIT, int); for sparc we
unfortunately didn't have access, but changes are analogous to
the rest.
Joint work with Alexei Starovoitov.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mircea Gherzan <mgherzan@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Chema Gonzalez <chemag@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29 08:22:50 +00:00
|
|
|
case BPF_LD | BPF_W | BPF_ABS:
|
net: filter: rework/optimize internal BPF interpreter's instruction set
This patch replaces/reworks the kernel-internal BPF interpreter with
an optimized BPF instruction set format that is modelled closer to
mimic native instruction sets and is designed to be JITed with one to
one mapping. Thus, the new interpreter is noticeably faster than the
current implementation of sk_run_filter(); mainly for two reasons:
1. Fall-through jumps:
BPF jump instructions are forced to go either 'true' or 'false'
branch which causes branch-miss penalty. The new BPF jump
instructions have only one branch and fall-through otherwise,
which fits the CPU branch predictor logic better. `perf stat`
shows drastic difference for branch-misses between the old and
new code.
2. Jump-threaded implementation of interpreter vs switch
statement:
Instead of single table-jump at the top of 'switch' statement,
gcc will now generate multiple table-jump instructions, which
helps CPU branch predictor logic.
Note that the verification of filters is still being done through
sk_chk_filter() in classical BPF format, so filters from user- or
kernel space are verified in the same way as we do now, and same
restrictions/constraints hold as well.
We reuse current BPF JIT compilers in a way that this upgrade would
even be fine as is, but nevertheless allows for a successive upgrade
of BPF JIT compilers to the new format.
The internal instruction set migration is being done after the
probing for JIT compilation, so in case JIT compilers are able to
create a native opcode image, we're going to use that, and in all
other cases we're doing a follow-up migration of the BPF program's
instruction set, so that it can be transparently run in the new
interpreter.
In short, the *internal* format extends BPF in the following way (more
details can be taken from the appended documentation):
- Number of registers increase from 2 to 10
- Register width increases from 32-bit to 64-bit
- Conditional jt/jf targets replaced with jt/fall-through
- Adds signed > and >= insns
- 16 4-byte stack slots for register spill-fill replaced
with up to 512 bytes of multi-use stack space
- Introduction of bpf_call insn and register passing convention
for zero overhead calls from/to other kernel functions
- Adds arithmetic right shift and endianness conversion insns
- Adds atomic_add insn
- Old tax/txa insns are replaced with 'mov dst,src' insn
Performance of two BPF filters generated by libpcap resp. bpf_asm
was measured on x86_64, i386 and arm32 (other libpcap programs
have similar performance differences):
fprog #1 is taken from Documentation/networking/filter.txt:
tcpdump -i eth0 port 22 -dd
fprog #2 is taken from 'man tcpdump':
tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) -
((tcp[12]&0xf0)>>2)) != 0)' -dd
Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the
same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call,
smaller is better:
--x86_64--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 90 101 192 202
new BPF 31 71 47 97
old BPF jit 12 34 17 44
new BPF jit TBD
--i386--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 107 136 227 252
new BPF 40 119 69 172
--arm32--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 202 300 475 540
new BPF 180 270 330 470
old BPF jit 26 182 37 202
new BPF jit TBD
Thus, without changing any userland BPF filters, applications on
top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf
classifier, netfilter's xt_bpf, team driver's load-balancing mode,
and many more will have better interpreter filtering performance.
While we are replacing the internal BPF interpreter, we also need
to convert seccomp BPF in the same step to make use of the new
internal structure since it makes use of lower-level API details
without being further decoupled through higher-level calls like
sk_unattached_filter_{create,destroy}(), for example.
Just as for normal socket filtering, also seccomp BPF experiences
a time-to-verdict speedup:
05-sim-long_jumps.c of libseccomp was used as micro-benchmark:
seccomp_rule_add_exact(ctx,...
seccomp_rule_add_exact(ctx,...
rc = seccomp_load(ctx);
for (i = 0; i < 10000000; i++)
syscall(199, 100);
'short filter' has 2 rules
'large filter' has 200 rules
'short filter' performance is slightly better on x86_64/i386/arm32
'large filter' is much faster on x86_64 and i386 and shows no
difference on arm32
--x86_64-- short filter
old BPF: 2.7 sec
39.12% bench libc-2.15.so [.] syscall
8.10% bench [kernel.kallsyms] [k] sk_run_filter
6.31% bench [kernel.kallsyms] [k] system_call
5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller
3.70% bench [kernel.kallsyms] [k] __secure_computing
3.67% bench [kernel.kallsyms] [k] lock_is_held
3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load
new BPF: 2.58 sec
42.05% bench libc-2.15.so [.] syscall
6.91% bench [kernel.kallsyms] [k] system_call
6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
6.07% bench [kernel.kallsyms] [k] __secure_computing
5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
--arm32-- short filter
old BPF: 4.0 sec
39.92% bench [kernel.kallsyms] [k] vector_swi
16.60% bench [kernel.kallsyms] [k] sk_run_filter
14.66% bench libc-2.17.so [.] syscall
5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load
5.10% bench [kernel.kallsyms] [k] __secure_computing
new BPF: 3.7 sec
35.93% bench [kernel.kallsyms] [k] vector_swi
21.89% bench libc-2.17.so [.] syscall
13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
6.25% bench [kernel.kallsyms] [k] __secure_computing
3.96% bench [kernel.kallsyms] [k] syscall_trace_exit
--x86_64-- large filter
old BPF: 8.6 seconds
73.38% bench [kernel.kallsyms] [k] sk_run_filter
10.70% bench libc-2.15.so [.] syscall
5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.97% bench [kernel.kallsyms] [k] system_call
new BPF: 5.7 seconds
66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
16.75% bench libc-2.15.so [.] syscall
3.31% bench [kernel.kallsyms] [k] system_call
2.88% bench [kernel.kallsyms] [k] __secure_computing
--i386-- large filter
old BPF: 5.4 sec
new BPF: 3.8 sec
--arm32-- large filter
old BPF: 13.5 sec
73.88% bench [kernel.kallsyms] [k] sk_run_filter
10.29% bench [kernel.kallsyms] [k] vector_swi
6.46% bench libc-2.17.so [.] syscall
2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.19% bench [kernel.kallsyms] [k] __secure_computing
0.87% bench [kernel.kallsyms] [k] sys_getuid
new BPF: 13.5 sec
76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
10.98% bench [kernel.kallsyms] [k] vector_swi
5.87% bench libc-2.17.so [.] syscall
1.77% bench [kernel.kallsyms] [k] __secure_computing
0.93% bench [kernel.kallsyms] [k] sys_getuid
BPF filters generated by seccomp are very branchy, so the new
internal BPF performance is better than the old one. Performance
gains will be even higher when BPF JIT is committed for the
new structure, which is planned in future work (as successive
JIT migrations).
BPF has also been stress-tested with trinity's BPF fuzzer.
Joint work with Daniel Borkmann.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Moore <pmoore@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
|
|
|
ftest->code = BPF_LDX | BPF_W | BPF_ABS;
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
/* 32-bit aligned and not out of bounds. */
|
|
|
|
if (k >= sizeof(struct seccomp_data) || k & 3)
|
|
|
|
return -EINVAL;
|
|
|
|
continue;
|
net: filter: get rid of BPF_S_* enum
This patch finally allows us to get rid of the BPF_S_* enum.
Currently, the code performs unnecessary encode and decode
workarounds in seccomp and filter migration itself when a filter
is being attached in order to overcome BPF_S_* encoding which
is not used anymore by the new interpreter resp. JIT compilers.
Keeping it around would mean that also in future we would need
to extend and maintain this enum and related encoders/decoders.
We can get rid of all that and save us these operations during
filter attaching. Naturally, also JIT compilers need to be updated
by this.
Before JIT conversion is being done, each compiler checks if A
is being loaded at startup to obtain information if it needs to
emit instructions to clear A first. Since BPF extensions are a
subset of BPF_LD | BPF_{W,H,B} | BPF_ABS variants, case statements
for extensions can be removed at that point. To ease and minimalize
code changes in the classic JITs, we have introduced bpf_anc_helper().
Tested with test_bpf on x86_64 (JIT, int), s390x (JIT, int),
arm (JIT, int), i368 (int), ppc64 (JIT, int); for sparc we
unfortunately didn't have access, but changes are analogous to
the rest.
Joint work with Alexei Starovoitov.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mircea Gherzan <mgherzan@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Chema Gonzalez <chemag@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29 08:22:50 +00:00
|
|
|
case BPF_LD | BPF_W | BPF_LEN:
|
net: filter: rework/optimize internal BPF interpreter's instruction set
This patch replaces/reworks the kernel-internal BPF interpreter with
an optimized BPF instruction set format that is modelled closer to
mimic native instruction sets and is designed to be JITed with one to
one mapping. Thus, the new interpreter is noticeably faster than the
current implementation of sk_run_filter(); mainly for two reasons:
1. Fall-through jumps:
BPF jump instructions are forced to go either 'true' or 'false'
branch which causes branch-miss penalty. The new BPF jump
instructions have only one branch and fall-through otherwise,
which fits the CPU branch predictor logic better. `perf stat`
shows drastic difference for branch-misses between the old and
new code.
2. Jump-threaded implementation of interpreter vs switch
statement:
Instead of single table-jump at the top of 'switch' statement,
gcc will now generate multiple table-jump instructions, which
helps CPU branch predictor logic.
Note that the verification of filters is still being done through
sk_chk_filter() in classical BPF format, so filters from user- or
kernel space are verified in the same way as we do now, and same
restrictions/constraints hold as well.
We reuse current BPF JIT compilers in a way that this upgrade would
even be fine as is, but nevertheless allows for a successive upgrade
of BPF JIT compilers to the new format.
The internal instruction set migration is being done after the
probing for JIT compilation, so in case JIT compilers are able to
create a native opcode image, we're going to use that, and in all
other cases we're doing a follow-up migration of the BPF program's
instruction set, so that it can be transparently run in the new
interpreter.
In short, the *internal* format extends BPF in the following way (more
details can be taken from the appended documentation):
- Number of registers increase from 2 to 10
- Register width increases from 32-bit to 64-bit
- Conditional jt/jf targets replaced with jt/fall-through
- Adds signed > and >= insns
- 16 4-byte stack slots for register spill-fill replaced
with up to 512 bytes of multi-use stack space
- Introduction of bpf_call insn and register passing convention
for zero overhead calls from/to other kernel functions
- Adds arithmetic right shift and endianness conversion insns
- Adds atomic_add insn
- Old tax/txa insns are replaced with 'mov dst,src' insn
Performance of two BPF filters generated by libpcap resp. bpf_asm
was measured on x86_64, i386 and arm32 (other libpcap programs
have similar performance differences):
fprog #1 is taken from Documentation/networking/filter.txt:
tcpdump -i eth0 port 22 -dd
fprog #2 is taken from 'man tcpdump':
tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) -
((tcp[12]&0xf0)>>2)) != 0)' -dd
Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the
same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call,
smaller is better:
--x86_64--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 90 101 192 202
new BPF 31 71 47 97
old BPF jit 12 34 17 44
new BPF jit TBD
--i386--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 107 136 227 252
new BPF 40 119 69 172
--arm32--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 202 300 475 540
new BPF 180 270 330 470
old BPF jit 26 182 37 202
new BPF jit TBD
Thus, without changing any userland BPF filters, applications on
top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf
classifier, netfilter's xt_bpf, team driver's load-balancing mode,
and many more will have better interpreter filtering performance.
While we are replacing the internal BPF interpreter, we also need
to convert seccomp BPF in the same step to make use of the new
internal structure since it makes use of lower-level API details
without being further decoupled through higher-level calls like
sk_unattached_filter_{create,destroy}(), for example.
Just as for normal socket filtering, also seccomp BPF experiences
a time-to-verdict speedup:
05-sim-long_jumps.c of libseccomp was used as micro-benchmark:
seccomp_rule_add_exact(ctx,...
seccomp_rule_add_exact(ctx,...
rc = seccomp_load(ctx);
for (i = 0; i < 10000000; i++)
syscall(199, 100);
'short filter' has 2 rules
'large filter' has 200 rules
'short filter' performance is slightly better on x86_64/i386/arm32
'large filter' is much faster on x86_64 and i386 and shows no
difference on arm32
--x86_64-- short filter
old BPF: 2.7 sec
39.12% bench libc-2.15.so [.] syscall
8.10% bench [kernel.kallsyms] [k] sk_run_filter
6.31% bench [kernel.kallsyms] [k] system_call
5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller
3.70% bench [kernel.kallsyms] [k] __secure_computing
3.67% bench [kernel.kallsyms] [k] lock_is_held
3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load
new BPF: 2.58 sec
42.05% bench libc-2.15.so [.] syscall
6.91% bench [kernel.kallsyms] [k] system_call
6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
6.07% bench [kernel.kallsyms] [k] __secure_computing
5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
--arm32-- short filter
old BPF: 4.0 sec
39.92% bench [kernel.kallsyms] [k] vector_swi
16.60% bench [kernel.kallsyms] [k] sk_run_filter
14.66% bench libc-2.17.so [.] syscall
5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load
5.10% bench [kernel.kallsyms] [k] __secure_computing
new BPF: 3.7 sec
35.93% bench [kernel.kallsyms] [k] vector_swi
21.89% bench libc-2.17.so [.] syscall
13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
6.25% bench [kernel.kallsyms] [k] __secure_computing
3.96% bench [kernel.kallsyms] [k] syscall_trace_exit
--x86_64-- large filter
old BPF: 8.6 seconds
73.38% bench [kernel.kallsyms] [k] sk_run_filter
10.70% bench libc-2.15.so [.] syscall
5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.97% bench [kernel.kallsyms] [k] system_call
new BPF: 5.7 seconds
66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
16.75% bench libc-2.15.so [.] syscall
3.31% bench [kernel.kallsyms] [k] system_call
2.88% bench [kernel.kallsyms] [k] __secure_computing
--i386-- large filter
old BPF: 5.4 sec
new BPF: 3.8 sec
--arm32-- large filter
old BPF: 13.5 sec
73.88% bench [kernel.kallsyms] [k] sk_run_filter
10.29% bench [kernel.kallsyms] [k] vector_swi
6.46% bench libc-2.17.so [.] syscall
2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.19% bench [kernel.kallsyms] [k] __secure_computing
0.87% bench [kernel.kallsyms] [k] sys_getuid
new BPF: 13.5 sec
76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
10.98% bench [kernel.kallsyms] [k] vector_swi
5.87% bench libc-2.17.so [.] syscall
1.77% bench [kernel.kallsyms] [k] __secure_computing
0.93% bench [kernel.kallsyms] [k] sys_getuid
BPF filters generated by seccomp are very branchy, so the new
internal BPF performance is better than the old one. Performance
gains will be even higher when BPF JIT is committed for the
new structure, which is planned in future work (as successive
JIT migrations).
BPF has also been stress-tested with trinity's BPF fuzzer.
Joint work with Daniel Borkmann.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Moore <pmoore@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
|
|
|
ftest->code = BPF_LD | BPF_IMM;
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
ftest->k = sizeof(struct seccomp_data);
|
|
|
|
continue;
|
net: filter: get rid of BPF_S_* enum
This patch finally allows us to get rid of the BPF_S_* enum.
Currently, the code performs unnecessary encode and decode
workarounds in seccomp and filter migration itself when a filter
is being attached in order to overcome BPF_S_* encoding which
is not used anymore by the new interpreter resp. JIT compilers.
Keeping it around would mean that also in future we would need
to extend and maintain this enum and related encoders/decoders.
We can get rid of all that and save us these operations during
filter attaching. Naturally, also JIT compilers need to be updated
by this.
Before JIT conversion is being done, each compiler checks if A
is being loaded at startup to obtain information if it needs to
emit instructions to clear A first. Since BPF extensions are a
subset of BPF_LD | BPF_{W,H,B} | BPF_ABS variants, case statements
for extensions can be removed at that point. To ease and minimalize
code changes in the classic JITs, we have introduced bpf_anc_helper().
Tested with test_bpf on x86_64 (JIT, int), s390x (JIT, int),
arm (JIT, int), i368 (int), ppc64 (JIT, int); for sparc we
unfortunately didn't have access, but changes are analogous to
the rest.
Joint work with Alexei Starovoitov.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mircea Gherzan <mgherzan@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Chema Gonzalez <chemag@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29 08:22:50 +00:00
|
|
|
case BPF_LDX | BPF_W | BPF_LEN:
|
net: filter: rework/optimize internal BPF interpreter's instruction set
This patch replaces/reworks the kernel-internal BPF interpreter with
an optimized BPF instruction set format that is modelled closer to
mimic native instruction sets and is designed to be JITed with one to
one mapping. Thus, the new interpreter is noticeably faster than the
current implementation of sk_run_filter(); mainly for two reasons:
1. Fall-through jumps:
BPF jump instructions are forced to go either 'true' or 'false'
branch which causes branch-miss penalty. The new BPF jump
instructions have only one branch and fall-through otherwise,
which fits the CPU branch predictor logic better. `perf stat`
shows drastic difference for branch-misses between the old and
new code.
2. Jump-threaded implementation of interpreter vs switch
statement:
Instead of single table-jump at the top of 'switch' statement,
gcc will now generate multiple table-jump instructions, which
helps CPU branch predictor logic.
Note that the verification of filters is still being done through
sk_chk_filter() in classical BPF format, so filters from user- or
kernel space are verified in the same way as we do now, and same
restrictions/constraints hold as well.
We reuse current BPF JIT compilers in a way that this upgrade would
even be fine as is, but nevertheless allows for a successive upgrade
of BPF JIT compilers to the new format.
The internal instruction set migration is being done after the
probing for JIT compilation, so in case JIT compilers are able to
create a native opcode image, we're going to use that, and in all
other cases we're doing a follow-up migration of the BPF program's
instruction set, so that it can be transparently run in the new
interpreter.
In short, the *internal* format extends BPF in the following way (more
details can be taken from the appended documentation):
- Number of registers increase from 2 to 10
- Register width increases from 32-bit to 64-bit
- Conditional jt/jf targets replaced with jt/fall-through
- Adds signed > and >= insns
- 16 4-byte stack slots for register spill-fill replaced
with up to 512 bytes of multi-use stack space
- Introduction of bpf_call insn and register passing convention
for zero overhead calls from/to other kernel functions
- Adds arithmetic right shift and endianness conversion insns
- Adds atomic_add insn
- Old tax/txa insns are replaced with 'mov dst,src' insn
Performance of two BPF filters generated by libpcap resp. bpf_asm
was measured on x86_64, i386 and arm32 (other libpcap programs
have similar performance differences):
fprog #1 is taken from Documentation/networking/filter.txt:
tcpdump -i eth0 port 22 -dd
fprog #2 is taken from 'man tcpdump':
tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) -
((tcp[12]&0xf0)>>2)) != 0)' -dd
Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the
same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call,
smaller is better:
--x86_64--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 90 101 192 202
new BPF 31 71 47 97
old BPF jit 12 34 17 44
new BPF jit TBD
--i386--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 107 136 227 252
new BPF 40 119 69 172
--arm32--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 202 300 475 540
new BPF 180 270 330 470
old BPF jit 26 182 37 202
new BPF jit TBD
Thus, without changing any userland BPF filters, applications on
top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf
classifier, netfilter's xt_bpf, team driver's load-balancing mode,
and many more will have better interpreter filtering performance.
While we are replacing the internal BPF interpreter, we also need
to convert seccomp BPF in the same step to make use of the new
internal structure since it makes use of lower-level API details
without being further decoupled through higher-level calls like
sk_unattached_filter_{create,destroy}(), for example.
Just as for normal socket filtering, also seccomp BPF experiences
a time-to-verdict speedup:
05-sim-long_jumps.c of libseccomp was used as micro-benchmark:
seccomp_rule_add_exact(ctx,...
seccomp_rule_add_exact(ctx,...
rc = seccomp_load(ctx);
for (i = 0; i < 10000000; i++)
syscall(199, 100);
'short filter' has 2 rules
'large filter' has 200 rules
'short filter' performance is slightly better on x86_64/i386/arm32
'large filter' is much faster on x86_64 and i386 and shows no
difference on arm32
--x86_64-- short filter
old BPF: 2.7 sec
39.12% bench libc-2.15.so [.] syscall
8.10% bench [kernel.kallsyms] [k] sk_run_filter
6.31% bench [kernel.kallsyms] [k] system_call
5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller
3.70% bench [kernel.kallsyms] [k] __secure_computing
3.67% bench [kernel.kallsyms] [k] lock_is_held
3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load
new BPF: 2.58 sec
42.05% bench libc-2.15.so [.] syscall
6.91% bench [kernel.kallsyms] [k] system_call
6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
6.07% bench [kernel.kallsyms] [k] __secure_computing
5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
--arm32-- short filter
old BPF: 4.0 sec
39.92% bench [kernel.kallsyms] [k] vector_swi
16.60% bench [kernel.kallsyms] [k] sk_run_filter
14.66% bench libc-2.17.so [.] syscall
5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load
5.10% bench [kernel.kallsyms] [k] __secure_computing
new BPF: 3.7 sec
35.93% bench [kernel.kallsyms] [k] vector_swi
21.89% bench libc-2.17.so [.] syscall
13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
6.25% bench [kernel.kallsyms] [k] __secure_computing
3.96% bench [kernel.kallsyms] [k] syscall_trace_exit
--x86_64-- large filter
old BPF: 8.6 seconds
73.38% bench [kernel.kallsyms] [k] sk_run_filter
10.70% bench libc-2.15.so [.] syscall
5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.97% bench [kernel.kallsyms] [k] system_call
new BPF: 5.7 seconds
66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
16.75% bench libc-2.15.so [.] syscall
3.31% bench [kernel.kallsyms] [k] system_call
2.88% bench [kernel.kallsyms] [k] __secure_computing
--i386-- large filter
old BPF: 5.4 sec
new BPF: 3.8 sec
--arm32-- large filter
old BPF: 13.5 sec
73.88% bench [kernel.kallsyms] [k] sk_run_filter
10.29% bench [kernel.kallsyms] [k] vector_swi
6.46% bench libc-2.17.so [.] syscall
2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.19% bench [kernel.kallsyms] [k] __secure_computing
0.87% bench [kernel.kallsyms] [k] sys_getuid
new BPF: 13.5 sec
76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
10.98% bench [kernel.kallsyms] [k] vector_swi
5.87% bench libc-2.17.so [.] syscall
1.77% bench [kernel.kallsyms] [k] __secure_computing
0.93% bench [kernel.kallsyms] [k] sys_getuid
BPF filters generated by seccomp are very branchy, so the new
internal BPF performance is better than the old one. Performance
gains will be even higher when BPF JIT is committed for the
new structure, which is planned in future work (as successive
JIT migrations).
BPF has also been stress-tested with trinity's BPF fuzzer.
Joint work with Daniel Borkmann.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Moore <pmoore@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
|
|
|
ftest->code = BPF_LDX | BPF_IMM;
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
ftest->k = sizeof(struct seccomp_data);
|
|
|
|
continue;
|
|
|
|
/* Explicitly include allowed calls. */
|
net: filter: get rid of BPF_S_* enum
This patch finally allows us to get rid of the BPF_S_* enum.
Currently, the code performs unnecessary encode and decode
workarounds in seccomp and filter migration itself when a filter
is being attached in order to overcome BPF_S_* encoding which
is not used anymore by the new interpreter resp. JIT compilers.
Keeping it around would mean that also in future we would need
to extend and maintain this enum and related encoders/decoders.
We can get rid of all that and save us these operations during
filter attaching. Naturally, also JIT compilers need to be updated
by this.
Before JIT conversion is being done, each compiler checks if A
is being loaded at startup to obtain information if it needs to
emit instructions to clear A first. Since BPF extensions are a
subset of BPF_LD | BPF_{W,H,B} | BPF_ABS variants, case statements
for extensions can be removed at that point. To ease and minimalize
code changes in the classic JITs, we have introduced bpf_anc_helper().
Tested with test_bpf on x86_64 (JIT, int), s390x (JIT, int),
arm (JIT, int), i368 (int), ppc64 (JIT, int); for sparc we
unfortunately didn't have access, but changes are analogous to
the rest.
Joint work with Alexei Starovoitov.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mircea Gherzan <mgherzan@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Chema Gonzalez <chemag@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29 08:22:50 +00:00
|
|
|
case BPF_RET | BPF_K:
|
|
|
|
case BPF_RET | BPF_A:
|
|
|
|
case BPF_ALU | BPF_ADD | BPF_K:
|
|
|
|
case BPF_ALU | BPF_ADD | BPF_X:
|
|
|
|
case BPF_ALU | BPF_SUB | BPF_K:
|
|
|
|
case BPF_ALU | BPF_SUB | BPF_X:
|
|
|
|
case BPF_ALU | BPF_MUL | BPF_K:
|
|
|
|
case BPF_ALU | BPF_MUL | BPF_X:
|
|
|
|
case BPF_ALU | BPF_DIV | BPF_K:
|
|
|
|
case BPF_ALU | BPF_DIV | BPF_X:
|
|
|
|
case BPF_ALU | BPF_AND | BPF_K:
|
|
|
|
case BPF_ALU | BPF_AND | BPF_X:
|
|
|
|
case BPF_ALU | BPF_OR | BPF_K:
|
|
|
|
case BPF_ALU | BPF_OR | BPF_X:
|
|
|
|
case BPF_ALU | BPF_XOR | BPF_K:
|
|
|
|
case BPF_ALU | BPF_XOR | BPF_X:
|
|
|
|
case BPF_ALU | BPF_LSH | BPF_K:
|
|
|
|
case BPF_ALU | BPF_LSH | BPF_X:
|
|
|
|
case BPF_ALU | BPF_RSH | BPF_K:
|
|
|
|
case BPF_ALU | BPF_RSH | BPF_X:
|
|
|
|
case BPF_ALU | BPF_NEG:
|
|
|
|
case BPF_LD | BPF_IMM:
|
|
|
|
case BPF_LDX | BPF_IMM:
|
|
|
|
case BPF_MISC | BPF_TAX:
|
|
|
|
case BPF_MISC | BPF_TXA:
|
|
|
|
case BPF_LD | BPF_MEM:
|
|
|
|
case BPF_LDX | BPF_MEM:
|
|
|
|
case BPF_ST:
|
|
|
|
case BPF_STX:
|
|
|
|
case BPF_JMP | BPF_JA:
|
|
|
|
case BPF_JMP | BPF_JEQ | BPF_K:
|
|
|
|
case BPF_JMP | BPF_JEQ | BPF_X:
|
|
|
|
case BPF_JMP | BPF_JGE | BPF_K:
|
|
|
|
case BPF_JMP | BPF_JGE | BPF_X:
|
|
|
|
case BPF_JMP | BPF_JGT | BPF_K:
|
|
|
|
case BPF_JMP | BPF_JGT | BPF_X:
|
|
|
|
case BPF_JMP | BPF_JSET | BPF_K:
|
|
|
|
case BPF_JMP | BPF_JSET | BPF_X:
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
continue;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
seccomp/cache: Lookup syscall allowlist bitmap for fast path
The overhead of running Seccomp filters has been part of some past
discussions [1][2][3]. Oftentimes, the filters have a large number
of instructions that check syscall numbers one by one and jump based
on that. Some users chain BPF filters which further enlarge the
overhead. A recent work [6] comprehensively measures the Seccomp
overhead and shows that the overhead is non-negligible and has a
non-trivial impact on application performance.
We observed some common filters, such as docker's [4] or
systemd's [5], will make most decisions based only on the syscall
numbers, and as past discussions considered, a bitmap where each bit
represents a syscall makes most sense for these filters.
The fast (common) path for seccomp should be that the filter permits
the syscall to pass through, and failing seccomp is expected to be
an exceptional case; it is not expected for userspace to call a
denylisted syscall over and over.
When it can be concluded that an allow must occur for the given
architecture and syscall pair (this determination is introduced in
the next commit), seccomp will immediately allow the syscall,
bypassing further BPF execution.
Each architecture number has its own bitmap. The architecture
number in seccomp_data is checked against the defined architecture
number constant before proceeding to test the bit against the
bitmap with the syscall number as the index of the bit in the
bitmap, and if the bit is set, seccomp returns allow. The bitmaps
are all clear in this patch and will be initialized in the next
commit.
When only one architecture exists, the check against architecture
number is skipped, suggested by Kees Cook [7].
[1] https://lore.kernel.org/linux-security-module/c22a6c3cefc2412cad00ae14c1371711@huawei.com/T/
[2] https://lore.kernel.org/lkml/202005181120.971232B7B@keescook/T/
[3] https://github.com/seccomp/libseccomp/issues/116
[4] https://github.com/moby/moby/blob/ae0ef82b90356ac613f329a8ef5ee42ca923417d/profiles/seccomp/default.json
[5] https://github.com/systemd/systemd/blob/6743a1caf4037f03dc51a1277855018e4ab61957/src/shared/seccomp-util.c#L270
[6] Draco: Architectural and Operating System Support for System Call Security
https://tianyin.github.io/pub/draco.pdf, MICRO-53, Oct. 2020
[7] https://lore.kernel.org/bpf/202010091614.8BB0EB64@keescook/
Co-developed-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu>
Signed-off-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu>
Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/10f91a367ec4fcdea7fc3f086de3f5f13a4a7436.1602431034.git.yifeifz2@illinois.edu
2020-10-11 15:47:42 +00:00
|
|
|
#ifdef SECCOMP_ARCH_NATIVE
|
|
|
|
static inline bool seccomp_cache_check_allow_bitmap(const void *bitmap,
|
|
|
|
size_t bitmap_size,
|
|
|
|
int syscall_nr)
|
|
|
|
{
|
|
|
|
if (unlikely(syscall_nr < 0 || syscall_nr >= bitmap_size))
|
|
|
|
return false;
|
|
|
|
syscall_nr = array_index_nospec(syscall_nr, bitmap_size);
|
|
|
|
|
|
|
|
return test_bit(syscall_nr, bitmap);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* seccomp_cache_check_allow - lookup seccomp cache
|
|
|
|
* @sfilter: The seccomp filter
|
|
|
|
* @sd: The seccomp data to lookup the cache with
|
|
|
|
*
|
|
|
|
* Returns true if the seccomp_data is cached and allowed.
|
|
|
|
*/
|
|
|
|
static inline bool seccomp_cache_check_allow(const struct seccomp_filter *sfilter,
|
|
|
|
const struct seccomp_data *sd)
|
|
|
|
{
|
|
|
|
int syscall_nr = sd->nr;
|
|
|
|
const struct action_cache *cache = &sfilter->cache;
|
|
|
|
|
|
|
|
#ifndef SECCOMP_ARCH_COMPAT
|
|
|
|
/* A native-only architecture doesn't need to check sd->arch. */
|
|
|
|
return seccomp_cache_check_allow_bitmap(cache->allow_native,
|
|
|
|
SECCOMP_ARCH_NATIVE_NR,
|
|
|
|
syscall_nr);
|
|
|
|
#else
|
|
|
|
if (likely(sd->arch == SECCOMP_ARCH_NATIVE))
|
|
|
|
return seccomp_cache_check_allow_bitmap(cache->allow_native,
|
|
|
|
SECCOMP_ARCH_NATIVE_NR,
|
|
|
|
syscall_nr);
|
|
|
|
if (likely(sd->arch == SECCOMP_ARCH_COMPAT))
|
|
|
|
return seccomp_cache_check_allow_bitmap(cache->allow_compat,
|
|
|
|
SECCOMP_ARCH_COMPAT_NR,
|
|
|
|
syscall_nr);
|
|
|
|
#endif /* SECCOMP_ARCH_COMPAT */
|
|
|
|
|
|
|
|
WARN_ON_ONCE(true);
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
#endif /* SECCOMP_ARCH_NATIVE */
|
|
|
|
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
/**
|
2016-09-20 17:39:47 +00:00
|
|
|
* seccomp_run_filters - evaluates all seccomp filters against @sd
|
|
|
|
* @sd: optional seccomp data to be passed to filters
|
2017-08-02 22:00:40 +00:00
|
|
|
* @match: stores struct seccomp_filter that resulted in the return value,
|
|
|
|
* unless filter returned SECCOMP_RET_ALLOW, in which case it will
|
|
|
|
* be unchanged.
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
*
|
|
|
|
* Returns valid seccomp BPF response codes.
|
|
|
|
*/
|
seccomp: Implement SECCOMP_RET_KILL_PROCESS action
Right now, SECCOMP_RET_KILL_THREAD (neé SECCOMP_RET_KILL) kills the
current thread. There have been a few requests for this to kill the entire
process (the thread group). This cannot be just changed (discovered when
adding coredump support since coredumping kills the entire process)
because there are userspace programs depending on the thread-kill
behavior.
Instead, implement SECCOMP_RET_KILL_PROCESS, which is 0x80000000, and can
be processed as "-1" by the kernel, below the existing RET_KILL that is
ABI-set to "0". For userspace, SECCOMP_RET_ACTION_FULL is added to expand
the mask to the signed bit. Old userspace using the SECCOMP_RET_ACTION
mask will see SECCOMP_RET_KILL_PROCESS as 0 still, but this would only
be visible when examining the siginfo in a core dump from a RET_KILL_*,
where it will think it was thread-killed instead of process-killed.
Attempts to introduce this behavior via other ways (filter flags,
seccomp struct flags, masked RET_DATA bits) all come with weird
side-effects and baggage. This change preserves the central behavioral
expectations of the seccomp filter engine without putting too great
a burden on changes needed in userspace to use the new action.
The new action is discoverable by userspace through either the new
actions_avail sysctl or through the SECCOMP_GET_ACTION_AVAIL seccomp
operation. If used without checking for availability, old kernels
will treat RET_KILL_PROCESS as RET_KILL_THREAD (since the old mask
will produce RET_KILL_THREAD).
Cc: Paul Moore <paul@paul-moore.com>
Cc: Fabricio Voznika <fvoznika@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 20:12:11 +00:00
|
|
|
#define ACTION_ONLY(ret) ((s32)((ret) & (SECCOMP_RET_ACTION_FULL)))
|
2017-08-02 22:00:40 +00:00
|
|
|
static u32 seccomp_run_filters(const struct seccomp_data *sd,
|
|
|
|
struct seccomp_filter **match)
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
{
|
2012-04-12 21:47:59 +00:00
|
|
|
u32 ret = SECCOMP_RET_ALLOW;
|
2014-11-21 15:06:01 +00:00
|
|
|
/* Make sure cross-thread synced filter points somewhere sane. */
|
|
|
|
struct seccomp_filter *f =
|
2017-10-24 10:22:48 +00:00
|
|
|
READ_ONCE(current->seccomp.filter);
|
2012-04-12 21:47:59 +00:00
|
|
|
|
|
|
|
/* Ensure unexpected behavior doesn't result in failing open. */
|
2018-09-05 20:34:43 +00:00
|
|
|
if (WARN_ON(f == NULL))
|
2017-08-11 20:01:39 +00:00
|
|
|
return SECCOMP_RET_KILL_PROCESS;
|
2012-04-12 21:47:59 +00:00
|
|
|
|
seccomp/cache: Lookup syscall allowlist bitmap for fast path
The overhead of running Seccomp filters has been part of some past
discussions [1][2][3]. Oftentimes, the filters have a large number
of instructions that check syscall numbers one by one and jump based
on that. Some users chain BPF filters which further enlarge the
overhead. A recent work [6] comprehensively measures the Seccomp
overhead and shows that the overhead is non-negligible and has a
non-trivial impact on application performance.
We observed some common filters, such as docker's [4] or
systemd's [5], will make most decisions based only on the syscall
numbers, and as past discussions considered, a bitmap where each bit
represents a syscall makes most sense for these filters.
The fast (common) path for seccomp should be that the filter permits
the syscall to pass through, and failing seccomp is expected to be
an exceptional case; it is not expected for userspace to call a
denylisted syscall over and over.
When it can be concluded that an allow must occur for the given
architecture and syscall pair (this determination is introduced in
the next commit), seccomp will immediately allow the syscall,
bypassing further BPF execution.
Each architecture number has its own bitmap. The architecture
number in seccomp_data is checked against the defined architecture
number constant before proceeding to test the bit against the
bitmap with the syscall number as the index of the bit in the
bitmap, and if the bit is set, seccomp returns allow. The bitmaps
are all clear in this patch and will be initialized in the next
commit.
When only one architecture exists, the check against architecture
number is skipped, suggested by Kees Cook [7].
[1] https://lore.kernel.org/linux-security-module/c22a6c3cefc2412cad00ae14c1371711@huawei.com/T/
[2] https://lore.kernel.org/lkml/202005181120.971232B7B@keescook/T/
[3] https://github.com/seccomp/libseccomp/issues/116
[4] https://github.com/moby/moby/blob/ae0ef82b90356ac613f329a8ef5ee42ca923417d/profiles/seccomp/default.json
[5] https://github.com/systemd/systemd/blob/6743a1caf4037f03dc51a1277855018e4ab61957/src/shared/seccomp-util.c#L270
[6] Draco: Architectural and Operating System Support for System Call Security
https://tianyin.github.io/pub/draco.pdf, MICRO-53, Oct. 2020
[7] https://lore.kernel.org/bpf/202010091614.8BB0EB64@keescook/
Co-developed-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu>
Signed-off-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu>
Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/10f91a367ec4fcdea7fc3f086de3f5f13a4a7436.1602431034.git.yifeifz2@illinois.edu
2020-10-11 15:47:42 +00:00
|
|
|
if (seccomp_cache_check_allow(f, sd))
|
|
|
|
return SECCOMP_RET_ALLOW;
|
|
|
|
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
/*
|
|
|
|
* All filters in the list are evaluated and the lowest BPF return
|
2012-04-12 21:47:59 +00:00
|
|
|
* value always takes priority (ignoring the DATA).
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
*/
|
2014-06-27 22:01:35 +00:00
|
|
|
for (; f; f = f->prev) {
|
2020-02-24 14:01:43 +00:00
|
|
|
u32 cur_ret = bpf_prog_run_pin_on_cpu(f->prog, sd);
|
2014-05-14 02:50:47 +00:00
|
|
|
|
seccomp: Implement SECCOMP_RET_KILL_PROCESS action
Right now, SECCOMP_RET_KILL_THREAD (neé SECCOMP_RET_KILL) kills the
current thread. There have been a few requests for this to kill the entire
process (the thread group). This cannot be just changed (discovered when
adding coredump support since coredumping kills the entire process)
because there are userspace programs depending on the thread-kill
behavior.
Instead, implement SECCOMP_RET_KILL_PROCESS, which is 0x80000000, and can
be processed as "-1" by the kernel, below the existing RET_KILL that is
ABI-set to "0". For userspace, SECCOMP_RET_ACTION_FULL is added to expand
the mask to the signed bit. Old userspace using the SECCOMP_RET_ACTION
mask will see SECCOMP_RET_KILL_PROCESS as 0 still, but this would only
be visible when examining the siginfo in a core dump from a RET_KILL_*,
where it will think it was thread-killed instead of process-killed.
Attempts to introduce this behavior via other ways (filter flags,
seccomp struct flags, masked RET_DATA bits) all come with weird
side-effects and baggage. This change preserves the central behavioral
expectations of the seccomp filter engine without putting too great
a burden on changes needed in userspace to use the new action.
The new action is discoverable by userspace through either the new
actions_avail sysctl or through the SECCOMP_GET_ACTION_AVAIL seccomp
operation. If used without checking for availability, old kernels
will treat RET_KILL_PROCESS as RET_KILL_THREAD (since the old mask
will produce RET_KILL_THREAD).
Cc: Paul Moore <paul@paul-moore.com>
Cc: Fabricio Voznika <fvoznika@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 20:12:11 +00:00
|
|
|
if (ACTION_ONLY(cur_ret) < ACTION_ONLY(ret)) {
|
2012-04-12 21:47:59 +00:00
|
|
|
ret = cur_ret;
|
2017-08-02 22:00:40 +00:00
|
|
|
*match = f;
|
|
|
|
}
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
2014-06-25 22:38:02 +00:00
|
|
|
#endif /* CONFIG_SECCOMP_FILTER */
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
|
2014-06-25 22:38:02 +00:00
|
|
|
static inline bool seccomp_may_assign_mode(unsigned long seccomp_mode)
|
|
|
|
{
|
2014-08-11 03:50:30 +00:00
|
|
|
assert_spin_locked(¤t->sighand->siglock);
|
2014-06-27 22:18:48 +00:00
|
|
|
|
2014-06-25 22:38:02 +00:00
|
|
|
if (current->seccomp.mode && current->seccomp.mode != seccomp_mode)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2018-05-04 13:12:06 +00:00
|
|
|
void __weak arch_seccomp_spec_mitigate(struct task_struct *task) { }
|
2018-05-01 22:07:31 +00:00
|
|
|
|
2014-06-27 22:01:35 +00:00
|
|
|
static inline void seccomp_assign_mode(struct task_struct *task,
|
2018-05-03 21:56:12 +00:00
|
|
|
unsigned long seccomp_mode,
|
|
|
|
unsigned long flags)
|
2014-06-25 22:38:02 +00:00
|
|
|
{
|
2014-08-11 03:50:30 +00:00
|
|
|
assert_spin_locked(&task->sighand->siglock);
|
2014-06-27 22:18:48 +00:00
|
|
|
|
2014-06-27 22:01:35 +00:00
|
|
|
task->seccomp.mode = seccomp_mode;
|
|
|
|
/*
|
2020-11-16 17:42:00 +00:00
|
|
|
* Make sure SYSCALL_WORK_SECCOMP cannot be set before the mode (and
|
2014-06-27 22:01:35 +00:00
|
|
|
* filter) is set.
|
|
|
|
*/
|
|
|
|
smp_mb__before_atomic();
|
2018-05-03 21:56:12 +00:00
|
|
|
/* Assume default seccomp processes want spec flaw mitigation. */
|
|
|
|
if ((flags & SECCOMP_FILTER_FLAG_SPEC_ALLOW) == 0)
|
2018-05-04 13:12:06 +00:00
|
|
|
arch_seccomp_spec_mitigate(task);
|
2020-11-16 17:42:00 +00:00
|
|
|
set_task_syscall_work(task, SECCOMP);
|
2014-06-25 22:38:02 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_SECCOMP_FILTER
|
2014-06-05 07:23:17 +00:00
|
|
|
/* Returns 1 if the parent is an ancestor of the child. */
|
|
|
|
static int is_ancestor(struct seccomp_filter *parent,
|
|
|
|
struct seccomp_filter *child)
|
|
|
|
{
|
|
|
|
/* NULL is the root ancestor. */
|
|
|
|
if (parent == NULL)
|
|
|
|
return 1;
|
|
|
|
for (; child; child = child->prev)
|
|
|
|
if (child == parent)
|
|
|
|
return 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* seccomp_can_sync_threads: checks if all threads can be synchronized
|
|
|
|
*
|
|
|
|
* Expects sighand and cred_guard_mutex locks to be held.
|
|
|
|
*
|
|
|
|
* Returns 0 on success, -ve on error, or the pid of a thread which was
|
2019-03-06 20:14:12 +00:00
|
|
|
* either not in the correct seccomp mode or did not have an ancestral
|
2014-06-05 07:23:17 +00:00
|
|
|
* seccomp filter.
|
|
|
|
*/
|
|
|
|
static inline pid_t seccomp_can_sync_threads(void)
|
|
|
|
{
|
|
|
|
struct task_struct *thread, *caller;
|
|
|
|
|
|
|
|
BUG_ON(!mutex_is_locked(¤t->signal->cred_guard_mutex));
|
2014-08-11 03:50:30 +00:00
|
|
|
assert_spin_locked(¤t->sighand->siglock);
|
2014-06-05 07:23:17 +00:00
|
|
|
|
|
|
|
/* Validate all threads being eligible for synchronization. */
|
|
|
|
caller = current;
|
|
|
|
for_each_thread(caller, thread) {
|
|
|
|
pid_t failed;
|
|
|
|
|
|
|
|
/* Skip current, since it is initiating the sync. */
|
|
|
|
if (thread == caller)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (thread->seccomp.mode == SECCOMP_MODE_DISABLED ||
|
|
|
|
(thread->seccomp.mode == SECCOMP_MODE_FILTER &&
|
|
|
|
is_ancestor(thread->seccomp.filter,
|
|
|
|
caller->seccomp.filter)))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* Return the first thread that cannot be synchronized. */
|
|
|
|
failed = task_pid_vnr(thread);
|
|
|
|
/* If the pid cannot be resolved, then return -ESRCH */
|
2018-09-05 20:34:43 +00:00
|
|
|
if (WARN_ON(failed == 0))
|
2014-06-05 07:23:17 +00:00
|
|
|
failed = -ESRCH;
|
|
|
|
return failed;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2020-05-31 11:50:29 +00:00
|
|
|
static inline void seccomp_filter_free(struct seccomp_filter *filter)
|
|
|
|
{
|
|
|
|
if (filter) {
|
|
|
|
bpf_prog_destroy(filter->prog);
|
|
|
|
kfree(filter);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2020-05-31 11:50:30 +00:00
|
|
|
static void __seccomp_filter_orphan(struct seccomp_filter *orig)
|
|
|
|
{
|
|
|
|
while (orig && refcount_dec_and_test(&orig->users)) {
|
|
|
|
if (waitqueue_active(&orig->wqh))
|
|
|
|
wake_up_poll(&orig->wqh, EPOLLHUP);
|
|
|
|
orig = orig->prev;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2020-05-31 11:50:29 +00:00
|
|
|
static void __put_seccomp_filter(struct seccomp_filter *orig)
|
|
|
|
{
|
|
|
|
/* Clean up single-reference branches iteratively. */
|
|
|
|
while (orig && refcount_dec_and_test(&orig->refs)) {
|
|
|
|
struct seccomp_filter *freeme = orig;
|
|
|
|
orig = orig->prev;
|
|
|
|
seccomp_filter_free(freeme);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2020-05-31 11:50:30 +00:00
|
|
|
static void __seccomp_filter_release(struct seccomp_filter *orig)
|
|
|
|
{
|
|
|
|
/* Notify about any unused filters in the task's former filter tree. */
|
|
|
|
__seccomp_filter_orphan(orig);
|
|
|
|
/* Finally drop all references to the task's former tree. */
|
|
|
|
__put_seccomp_filter(orig);
|
|
|
|
}
|
|
|
|
|
2020-05-31 11:50:29 +00:00
|
|
|
/**
|
2020-05-31 11:50:30 +00:00
|
|
|
* seccomp_filter_release - Detach the task from its filter tree,
|
|
|
|
* drop its reference count, and notify
|
|
|
|
* about unused filters
|
2020-05-31 11:50:29 +00:00
|
|
|
*
|
|
|
|
* This function should only be called when the task is exiting as
|
|
|
|
* it detaches it from its filter tree. As such, READ_ONCE() and
|
|
|
|
* barriers are not needed here, as would normally be needed.
|
|
|
|
*/
|
|
|
|
void seccomp_filter_release(struct task_struct *tsk)
|
|
|
|
{
|
|
|
|
struct seccomp_filter *orig = tsk->seccomp.filter;
|
|
|
|
|
2020-11-11 13:33:54 +00:00
|
|
|
/* We are effectively holding the siglock by not having any sighand. */
|
|
|
|
WARN_ON(tsk->sighand != NULL);
|
|
|
|
|
2020-05-31 11:50:29 +00:00
|
|
|
/* Detach task from its filter tree. */
|
|
|
|
tsk->seccomp.filter = NULL;
|
2020-05-31 11:50:30 +00:00
|
|
|
__seccomp_filter_release(orig);
|
2020-05-31 11:50:29 +00:00
|
|
|
}
|
|
|
|
|
2014-06-05 07:23:17 +00:00
|
|
|
/**
|
|
|
|
* seccomp_sync_threads: sets all threads to use current's filter
|
|
|
|
*
|
|
|
|
* Expects sighand and cred_guard_mutex locks to be held, and for
|
|
|
|
* seccomp_can_sync_threads() to have returned success already
|
|
|
|
* without dropping the locks.
|
|
|
|
*
|
|
|
|
*/
|
2018-05-03 21:56:12 +00:00
|
|
|
static inline void seccomp_sync_threads(unsigned long flags)
|
2014-06-05 07:23:17 +00:00
|
|
|
{
|
|
|
|
struct task_struct *thread, *caller;
|
|
|
|
|
|
|
|
BUG_ON(!mutex_is_locked(¤t->signal->cred_guard_mutex));
|
2014-08-11 03:50:30 +00:00
|
|
|
assert_spin_locked(¤t->sighand->siglock);
|
2014-06-05 07:23:17 +00:00
|
|
|
|
|
|
|
/* Synchronize all threads. */
|
|
|
|
caller = current;
|
|
|
|
for_each_thread(caller, thread) {
|
|
|
|
/* Skip current, since it needs no changes. */
|
|
|
|
if (thread == caller)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* Get a task reference for the new leaf node. */
|
|
|
|
get_seccomp_filter(caller);
|
2020-05-31 11:50:30 +00:00
|
|
|
|
2014-06-05 07:23:17 +00:00
|
|
|
/*
|
|
|
|
* Drop the task reference to the shared ancestor since
|
|
|
|
* current's path will hold a reference. (This also
|
|
|
|
* allows a put before the assignment.)
|
|
|
|
*/
|
2020-05-31 11:50:30 +00:00
|
|
|
__seccomp_filter_release(thread->seccomp.filter);
|
|
|
|
|
|
|
|
/* Make our new filter tree visible. */
|
2014-06-05 07:23:17 +00:00
|
|
|
smp_store_release(&thread->seccomp.filter,
|
|
|
|
caller->seccomp.filter);
|
2020-05-13 21:11:26 +00:00
|
|
|
atomic_set(&thread->seccomp.filter_count,
|
2021-03-04 23:37:08 +00:00
|
|
|
atomic_read(&caller->seccomp.filter_count));
|
2015-12-26 05:00:48 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Don't let an unprivileged task work around
|
|
|
|
* the no_new_privs restriction by creating
|
|
|
|
* a thread that sets it up, enters seccomp,
|
|
|
|
* then dies.
|
|
|
|
*/
|
|
|
|
if (task_no_new_privs(caller))
|
|
|
|
task_set_no_new_privs(thread);
|
|
|
|
|
2014-06-05 07:23:17 +00:00
|
|
|
/*
|
|
|
|
* Opt the other thread into seccomp if needed.
|
|
|
|
* As threads are considered to be trust-realm
|
|
|
|
* equivalent (see ptrace_may_access), it is safe to
|
|
|
|
* allow one thread to transition the other.
|
|
|
|
*/
|
2015-12-26 05:00:48 +00:00
|
|
|
if (thread->seccomp.mode == SECCOMP_MODE_DISABLED)
|
2018-05-03 21:56:12 +00:00
|
|
|
seccomp_assign_mode(thread, SECCOMP_MODE_FILTER,
|
|
|
|
flags);
|
2014-06-05 07:23:17 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
/**
|
2014-06-27 22:16:33 +00:00
|
|
|
* seccomp_prepare_filter: Prepares a seccomp filter for use.
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
* @fprog: BPF program to install
|
|
|
|
*
|
2014-06-27 22:16:33 +00:00
|
|
|
* Returns filter on success or an ERR_PTR on failure.
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
*/
|
2014-06-27 22:16:33 +00:00
|
|
|
static struct seccomp_filter *seccomp_prepare_filter(struct sock_fprog *fprog)
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
{
|
2015-05-06 14:12:30 +00:00
|
|
|
struct seccomp_filter *sfilter;
|
|
|
|
int ret;
|
2020-10-11 15:47:43 +00:00
|
|
|
const bool save_orig =
|
|
|
|
#if defined(CONFIG_CHECKPOINT_RESTORE) || defined(SECCOMP_ARCH_NATIVE)
|
|
|
|
true;
|
|
|
|
#else
|
|
|
|
false;
|
|
|
|
#endif
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
|
|
|
|
if (fprog->len == 0 || fprog->len > BPF_MAXINSNS)
|
2014-06-27 22:16:33 +00:00
|
|
|
return ERR_PTR(-EINVAL);
|
2015-05-06 14:12:28 +00:00
|
|
|
|
2014-06-27 22:16:33 +00:00
|
|
|
BUG_ON(INT_MAX / fprog->len < sizeof(struct sock_filter));
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
|
|
|
|
/*
|
2014-06-06 21:37:53 +00:00
|
|
|
* Installing a seccomp filter requires that the task has
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
* CAP_SYS_ADMIN in its namespace or be running with no_new_privs.
|
|
|
|
* This avoids scenarios where unprivileged tasks can affect the
|
|
|
|
* behavior of privileged children.
|
|
|
|
*/
|
2014-05-21 22:23:46 +00:00
|
|
|
if (!task_no_new_privs(current) &&
|
2020-10-30 12:38:49 +00:00
|
|
|
!ns_capable_noaudit(current_user_ns(), CAP_SYS_ADMIN))
|
2014-06-27 22:16:33 +00:00
|
|
|
return ERR_PTR(-EACCES);
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
|
net: filter: rework/optimize internal BPF interpreter's instruction set
This patch replaces/reworks the kernel-internal BPF interpreter with
an optimized BPF instruction set format that is modelled closer to
mimic native instruction sets and is designed to be JITed with one to
one mapping. Thus, the new interpreter is noticeably faster than the
current implementation of sk_run_filter(); mainly for two reasons:
1. Fall-through jumps:
BPF jump instructions are forced to go either 'true' or 'false'
branch which causes branch-miss penalty. The new BPF jump
instructions have only one branch and fall-through otherwise,
which fits the CPU branch predictor logic better. `perf stat`
shows drastic difference for branch-misses between the old and
new code.
2. Jump-threaded implementation of interpreter vs switch
statement:
Instead of single table-jump at the top of 'switch' statement,
gcc will now generate multiple table-jump instructions, which
helps CPU branch predictor logic.
Note that the verification of filters is still being done through
sk_chk_filter() in classical BPF format, so filters from user- or
kernel space are verified in the same way as we do now, and same
restrictions/constraints hold as well.
We reuse current BPF JIT compilers in a way that this upgrade would
even be fine as is, but nevertheless allows for a successive upgrade
of BPF JIT compilers to the new format.
The internal instruction set migration is being done after the
probing for JIT compilation, so in case JIT compilers are able to
create a native opcode image, we're going to use that, and in all
other cases we're doing a follow-up migration of the BPF program's
instruction set, so that it can be transparently run in the new
interpreter.
In short, the *internal* format extends BPF in the following way (more
details can be taken from the appended documentation):
- Number of registers increase from 2 to 10
- Register width increases from 32-bit to 64-bit
- Conditional jt/jf targets replaced with jt/fall-through
- Adds signed > and >= insns
- 16 4-byte stack slots for register spill-fill replaced
with up to 512 bytes of multi-use stack space
- Introduction of bpf_call insn and register passing convention
for zero overhead calls from/to other kernel functions
- Adds arithmetic right shift and endianness conversion insns
- Adds atomic_add insn
- Old tax/txa insns are replaced with 'mov dst,src' insn
Performance of two BPF filters generated by libpcap resp. bpf_asm
was measured on x86_64, i386 and arm32 (other libpcap programs
have similar performance differences):
fprog #1 is taken from Documentation/networking/filter.txt:
tcpdump -i eth0 port 22 -dd
fprog #2 is taken from 'man tcpdump':
tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) -
((tcp[12]&0xf0)>>2)) != 0)' -dd
Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the
same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call,
smaller is better:
--x86_64--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 90 101 192 202
new BPF 31 71 47 97
old BPF jit 12 34 17 44
new BPF jit TBD
--i386--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 107 136 227 252
new BPF 40 119 69 172
--arm32--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 202 300 475 540
new BPF 180 270 330 470
old BPF jit 26 182 37 202
new BPF jit TBD
Thus, without changing any userland BPF filters, applications on
top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf
classifier, netfilter's xt_bpf, team driver's load-balancing mode,
and many more will have better interpreter filtering performance.
While we are replacing the internal BPF interpreter, we also need
to convert seccomp BPF in the same step to make use of the new
internal structure since it makes use of lower-level API details
without being further decoupled through higher-level calls like
sk_unattached_filter_{create,destroy}(), for example.
Just as for normal socket filtering, also seccomp BPF experiences
a time-to-verdict speedup:
05-sim-long_jumps.c of libseccomp was used as micro-benchmark:
seccomp_rule_add_exact(ctx,...
seccomp_rule_add_exact(ctx,...
rc = seccomp_load(ctx);
for (i = 0; i < 10000000; i++)
syscall(199, 100);
'short filter' has 2 rules
'large filter' has 200 rules
'short filter' performance is slightly better on x86_64/i386/arm32
'large filter' is much faster on x86_64 and i386 and shows no
difference on arm32
--x86_64-- short filter
old BPF: 2.7 sec
39.12% bench libc-2.15.so [.] syscall
8.10% bench [kernel.kallsyms] [k] sk_run_filter
6.31% bench [kernel.kallsyms] [k] system_call
5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller
3.70% bench [kernel.kallsyms] [k] __secure_computing
3.67% bench [kernel.kallsyms] [k] lock_is_held
3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load
new BPF: 2.58 sec
42.05% bench libc-2.15.so [.] syscall
6.91% bench [kernel.kallsyms] [k] system_call
6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
6.07% bench [kernel.kallsyms] [k] __secure_computing
5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
--arm32-- short filter
old BPF: 4.0 sec
39.92% bench [kernel.kallsyms] [k] vector_swi
16.60% bench [kernel.kallsyms] [k] sk_run_filter
14.66% bench libc-2.17.so [.] syscall
5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load
5.10% bench [kernel.kallsyms] [k] __secure_computing
new BPF: 3.7 sec
35.93% bench [kernel.kallsyms] [k] vector_swi
21.89% bench libc-2.17.so [.] syscall
13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
6.25% bench [kernel.kallsyms] [k] __secure_computing
3.96% bench [kernel.kallsyms] [k] syscall_trace_exit
--x86_64-- large filter
old BPF: 8.6 seconds
73.38% bench [kernel.kallsyms] [k] sk_run_filter
10.70% bench libc-2.15.so [.] syscall
5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.97% bench [kernel.kallsyms] [k] system_call
new BPF: 5.7 seconds
66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
16.75% bench libc-2.15.so [.] syscall
3.31% bench [kernel.kallsyms] [k] system_call
2.88% bench [kernel.kallsyms] [k] __secure_computing
--i386-- large filter
old BPF: 5.4 sec
new BPF: 3.8 sec
--arm32-- large filter
old BPF: 13.5 sec
73.88% bench [kernel.kallsyms] [k] sk_run_filter
10.29% bench [kernel.kallsyms] [k] vector_swi
6.46% bench libc-2.17.so [.] syscall
2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.19% bench [kernel.kallsyms] [k] __secure_computing
0.87% bench [kernel.kallsyms] [k] sys_getuid
new BPF: 13.5 sec
76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
10.98% bench [kernel.kallsyms] [k] vector_swi
5.87% bench libc-2.17.so [.] syscall
1.77% bench [kernel.kallsyms] [k] __secure_computing
0.93% bench [kernel.kallsyms] [k] sys_getuid
BPF filters generated by seccomp are very branchy, so the new
internal BPF performance is better than the old one. Performance
gains will be even higher when BPF JIT is committed for the
new structure, which is planned in future work (as successive
JIT migrations).
BPF has also been stress-tested with trinity's BPF fuzzer.
Joint work with Daniel Borkmann.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Moore <pmoore@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
|
|
|
/* Allocate a new seccomp_filter */
|
2015-05-06 14:12:30 +00:00
|
|
|
sfilter = kzalloc(sizeof(*sfilter), GFP_KERNEL | __GFP_NOWARN);
|
|
|
|
if (!sfilter)
|
2015-05-06 14:12:28 +00:00
|
|
|
return ERR_PTR(-ENOMEM);
|
2015-05-06 14:12:30 +00:00
|
|
|
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
mutex_init(&sfilter->notify_lock);
|
2015-05-06 14:12:30 +00:00
|
|
|
ret = bpf_prog_create_from_user(&sfilter->prog, fprog,
|
2015-10-27 00:23:59 +00:00
|
|
|
seccomp_check_filter, save_orig);
|
2015-05-06 14:12:30 +00:00
|
|
|
if (ret < 0) {
|
|
|
|
kfree(sfilter);
|
|
|
|
return ERR_PTR(ret);
|
2015-05-06 14:12:28 +00:00
|
|
|
}
|
net: filter: rework/optimize internal BPF interpreter's instruction set
This patch replaces/reworks the kernel-internal BPF interpreter with
an optimized BPF instruction set format that is modelled closer to
mimic native instruction sets and is designed to be JITed with one to
one mapping. Thus, the new interpreter is noticeably faster than the
current implementation of sk_run_filter(); mainly for two reasons:
1. Fall-through jumps:
BPF jump instructions are forced to go either 'true' or 'false'
branch which causes branch-miss penalty. The new BPF jump
instructions have only one branch and fall-through otherwise,
which fits the CPU branch predictor logic better. `perf stat`
shows drastic difference for branch-misses between the old and
new code.
2. Jump-threaded implementation of interpreter vs switch
statement:
Instead of single table-jump at the top of 'switch' statement,
gcc will now generate multiple table-jump instructions, which
helps CPU branch predictor logic.
Note that the verification of filters is still being done through
sk_chk_filter() in classical BPF format, so filters from user- or
kernel space are verified in the same way as we do now, and same
restrictions/constraints hold as well.
We reuse current BPF JIT compilers in a way that this upgrade would
even be fine as is, but nevertheless allows for a successive upgrade
of BPF JIT compilers to the new format.
The internal instruction set migration is being done after the
probing for JIT compilation, so in case JIT compilers are able to
create a native opcode image, we're going to use that, and in all
other cases we're doing a follow-up migration of the BPF program's
instruction set, so that it can be transparently run in the new
interpreter.
In short, the *internal* format extends BPF in the following way (more
details can be taken from the appended documentation):
- Number of registers increase from 2 to 10
- Register width increases from 32-bit to 64-bit
- Conditional jt/jf targets replaced with jt/fall-through
- Adds signed > and >= insns
- 16 4-byte stack slots for register spill-fill replaced
with up to 512 bytes of multi-use stack space
- Introduction of bpf_call insn and register passing convention
for zero overhead calls from/to other kernel functions
- Adds arithmetic right shift and endianness conversion insns
- Adds atomic_add insn
- Old tax/txa insns are replaced with 'mov dst,src' insn
Performance of two BPF filters generated by libpcap resp. bpf_asm
was measured on x86_64, i386 and arm32 (other libpcap programs
have similar performance differences):
fprog #1 is taken from Documentation/networking/filter.txt:
tcpdump -i eth0 port 22 -dd
fprog #2 is taken from 'man tcpdump':
tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) -
((tcp[12]&0xf0)>>2)) != 0)' -dd
Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the
same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call,
smaller is better:
--x86_64--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 90 101 192 202
new BPF 31 71 47 97
old BPF jit 12 34 17 44
new BPF jit TBD
--i386--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 107 136 227 252
new BPF 40 119 69 172
--arm32--
fprog #1 fprog #1 fprog #2 fprog #2
cache-hit cache-miss cache-hit cache-miss
old BPF 202 300 475 540
new BPF 180 270 330 470
old BPF jit 26 182 37 202
new BPF jit TBD
Thus, without changing any userland BPF filters, applications on
top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf
classifier, netfilter's xt_bpf, team driver's load-balancing mode,
and many more will have better interpreter filtering performance.
While we are replacing the internal BPF interpreter, we also need
to convert seccomp BPF in the same step to make use of the new
internal structure since it makes use of lower-level API details
without being further decoupled through higher-level calls like
sk_unattached_filter_{create,destroy}(), for example.
Just as for normal socket filtering, also seccomp BPF experiences
a time-to-verdict speedup:
05-sim-long_jumps.c of libseccomp was used as micro-benchmark:
seccomp_rule_add_exact(ctx,...
seccomp_rule_add_exact(ctx,...
rc = seccomp_load(ctx);
for (i = 0; i < 10000000; i++)
syscall(199, 100);
'short filter' has 2 rules
'large filter' has 200 rules
'short filter' performance is slightly better on x86_64/i386/arm32
'large filter' is much faster on x86_64 and i386 and shows no
difference on arm32
--x86_64-- short filter
old BPF: 2.7 sec
39.12% bench libc-2.15.so [.] syscall
8.10% bench [kernel.kallsyms] [k] sk_run_filter
6.31% bench [kernel.kallsyms] [k] system_call
5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller
3.70% bench [kernel.kallsyms] [k] __secure_computing
3.67% bench [kernel.kallsyms] [k] lock_is_held
3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load
new BPF: 2.58 sec
42.05% bench libc-2.15.so [.] syscall
6.91% bench [kernel.kallsyms] [k] system_call
6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller
6.07% bench [kernel.kallsyms] [k] __secure_computing
5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
--arm32-- short filter
old BPF: 4.0 sec
39.92% bench [kernel.kallsyms] [k] vector_swi
16.60% bench [kernel.kallsyms] [k] sk_run_filter
14.66% bench libc-2.17.so [.] syscall
5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load
5.10% bench [kernel.kallsyms] [k] __secure_computing
new BPF: 3.7 sec
35.93% bench [kernel.kallsyms] [k] vector_swi
21.89% bench libc-2.17.so [.] syscall
13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
6.25% bench [kernel.kallsyms] [k] __secure_computing
3.96% bench [kernel.kallsyms] [k] syscall_trace_exit
--x86_64-- large filter
old BPF: 8.6 seconds
73.38% bench [kernel.kallsyms] [k] sk_run_filter
10.70% bench libc-2.15.so [.] syscall
5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.97% bench [kernel.kallsyms] [k] system_call
new BPF: 5.7 seconds
66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
16.75% bench libc-2.15.so [.] syscall
3.31% bench [kernel.kallsyms] [k] system_call
2.88% bench [kernel.kallsyms] [k] __secure_computing
--i386-- large filter
old BPF: 5.4 sec
new BPF: 3.8 sec
--arm32-- large filter
old BPF: 13.5 sec
73.88% bench [kernel.kallsyms] [k] sk_run_filter
10.29% bench [kernel.kallsyms] [k] vector_swi
6.46% bench libc-2.17.so [.] syscall
2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load
1.19% bench [kernel.kallsyms] [k] __secure_computing
0.87% bench [kernel.kallsyms] [k] sys_getuid
new BPF: 13.5 sec
76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp
10.98% bench [kernel.kallsyms] [k] vector_swi
5.87% bench libc-2.17.so [.] syscall
1.77% bench [kernel.kallsyms] [k] __secure_computing
0.93% bench [kernel.kallsyms] [k] sys_getuid
BPF filters generated by seccomp are very branchy, so the new
internal BPF performance is better than the old one. Performance
gains will be even higher when BPF JIT is committed for the
new structure, which is planned in future work (as successive
JIT migrations).
BPF has also been stress-tested with trinity's BPF fuzzer.
Joint work with Daniel Borkmann.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Moore <pmoore@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
|
|
|
|
2020-05-31 11:50:28 +00:00
|
|
|
refcount_set(&sfilter->refs, 1);
|
2020-05-31 11:50:30 +00:00
|
|
|
refcount_set(&sfilter->users, 1);
|
2020-06-01 18:50:07 +00:00
|
|
|
init_waitqueue_head(&sfilter->wqh);
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
|
2015-05-06 14:12:30 +00:00
|
|
|
return sfilter;
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2014-06-27 22:16:33 +00:00
|
|
|
* seccomp_prepare_user_filter - prepares a user-supplied sock_fprog
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
* @user_filter: pointer to the user data containing a sock_fprog.
|
|
|
|
*
|
|
|
|
* Returns 0 on success and non-zero otherwise.
|
|
|
|
*/
|
2014-06-27 22:16:33 +00:00
|
|
|
static struct seccomp_filter *
|
|
|
|
seccomp_prepare_user_filter(const char __user *user_filter)
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
{
|
|
|
|
struct sock_fprog fprog;
|
2014-06-27 22:16:33 +00:00
|
|
|
struct seccomp_filter *filter = ERR_PTR(-EFAULT);
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
|
|
|
|
#ifdef CONFIG_COMPAT
|
2016-03-22 21:24:52 +00:00
|
|
|
if (in_compat_syscall()) {
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
struct compat_sock_fprog fprog32;
|
|
|
|
if (copy_from_user(&fprog32, user_filter, sizeof(fprog32)))
|
|
|
|
goto out;
|
|
|
|
fprog.len = fprog32.len;
|
|
|
|
fprog.filter = compat_ptr(fprog32.filter);
|
|
|
|
} else /* falls through to the if below. */
|
|
|
|
#endif
|
|
|
|
if (copy_from_user(&fprog, user_filter, sizeof(fprog)))
|
|
|
|
goto out;
|
2014-06-27 22:16:33 +00:00
|
|
|
filter = seccomp_prepare_filter(&fprog);
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
out:
|
2014-06-27 22:16:33 +00:00
|
|
|
return filter;
|
|
|
|
}
|
|
|
|
|
2020-10-11 15:47:43 +00:00
|
|
|
#ifdef SECCOMP_ARCH_NATIVE
|
|
|
|
/**
|
|
|
|
* seccomp_is_const_allow - check if filter is constant allow with given data
|
|
|
|
* @fprog: The BPF programs
|
|
|
|
* @sd: The seccomp data to check against, only syscall number and arch
|
|
|
|
* number are considered constant.
|
|
|
|
*/
|
|
|
|
static bool seccomp_is_const_allow(struct sock_fprog_kern *fprog,
|
|
|
|
struct seccomp_data *sd)
|
|
|
|
{
|
|
|
|
unsigned int reg_value = 0;
|
|
|
|
unsigned int pc;
|
|
|
|
bool op_res;
|
|
|
|
|
|
|
|
if (WARN_ON_ONCE(!fprog))
|
|
|
|
return false;
|
|
|
|
|
|
|
|
for (pc = 0; pc < fprog->len; pc++) {
|
|
|
|
struct sock_filter *insn = &fprog->filter[pc];
|
|
|
|
u16 code = insn->code;
|
|
|
|
u32 k = insn->k;
|
|
|
|
|
|
|
|
switch (code) {
|
|
|
|
case BPF_LD | BPF_W | BPF_ABS:
|
|
|
|
switch (k) {
|
|
|
|
case offsetof(struct seccomp_data, nr):
|
|
|
|
reg_value = sd->nr;
|
|
|
|
break;
|
|
|
|
case offsetof(struct seccomp_data, arch):
|
|
|
|
reg_value = sd->arch;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
/* can't optimize (non-constant value load) */
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case BPF_RET | BPF_K:
|
|
|
|
/* reached return with constant values only, check allow */
|
|
|
|
return k == SECCOMP_RET_ALLOW;
|
|
|
|
case BPF_JMP | BPF_JA:
|
|
|
|
pc += insn->k;
|
|
|
|
break;
|
|
|
|
case BPF_JMP | BPF_JEQ | BPF_K:
|
|
|
|
case BPF_JMP | BPF_JGE | BPF_K:
|
|
|
|
case BPF_JMP | BPF_JGT | BPF_K:
|
|
|
|
case BPF_JMP | BPF_JSET | BPF_K:
|
|
|
|
switch (BPF_OP(code)) {
|
|
|
|
case BPF_JEQ:
|
|
|
|
op_res = reg_value == k;
|
|
|
|
break;
|
|
|
|
case BPF_JGE:
|
|
|
|
op_res = reg_value >= k;
|
|
|
|
break;
|
|
|
|
case BPF_JGT:
|
|
|
|
op_res = reg_value > k;
|
|
|
|
break;
|
|
|
|
case BPF_JSET:
|
|
|
|
op_res = !!(reg_value & k);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
/* can't optimize (unknown jump) */
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
pc += op_res ? insn->jt : insn->jf;
|
|
|
|
break;
|
|
|
|
case BPF_ALU | BPF_AND | BPF_K:
|
|
|
|
reg_value &= k;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
/* can't optimize (unknown insn) */
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ran off the end of the filter?! */
|
|
|
|
WARN_ON(1);
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void seccomp_cache_prepare_bitmap(struct seccomp_filter *sfilter,
|
|
|
|
void *bitmap, const void *bitmap_prev,
|
|
|
|
size_t bitmap_size, int arch)
|
|
|
|
{
|
|
|
|
struct sock_fprog_kern *fprog = sfilter->prog->orig_prog;
|
|
|
|
struct seccomp_data sd;
|
|
|
|
int nr;
|
|
|
|
|
|
|
|
if (bitmap_prev) {
|
|
|
|
/* The new filter must be as restrictive as the last. */
|
|
|
|
bitmap_copy(bitmap, bitmap_prev, bitmap_size);
|
|
|
|
} else {
|
|
|
|
/* Before any filters, all syscalls are always allowed. */
|
|
|
|
bitmap_fill(bitmap, bitmap_size);
|
|
|
|
}
|
|
|
|
|
|
|
|
for (nr = 0; nr < bitmap_size; nr++) {
|
|
|
|
/* No bitmap change: not a cacheable action. */
|
|
|
|
if (!test_bit(nr, bitmap))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
sd.nr = nr;
|
|
|
|
sd.arch = arch;
|
|
|
|
|
|
|
|
/* No bitmap change: continue to always allow. */
|
|
|
|
if (seccomp_is_const_allow(fprog, &sd))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Not a cacheable action: always run filters.
|
|
|
|
* atomic clear_bit() not needed, filter not visible yet.
|
|
|
|
*/
|
|
|
|
__clear_bit(nr, bitmap);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2021-03-31 03:07:24 +00:00
|
|
|
* seccomp_cache_prepare - emulate the filter to find cacheable syscalls
|
2020-10-11 15:47:43 +00:00
|
|
|
* @sfilter: The seccomp filter
|
|
|
|
*
|
|
|
|
* Returns 0 if successful or -errno if error occurred.
|
|
|
|
*/
|
|
|
|
static void seccomp_cache_prepare(struct seccomp_filter *sfilter)
|
|
|
|
{
|
|
|
|
struct action_cache *cache = &sfilter->cache;
|
|
|
|
const struct action_cache *cache_prev =
|
|
|
|
sfilter->prev ? &sfilter->prev->cache : NULL;
|
|
|
|
|
|
|
|
seccomp_cache_prepare_bitmap(sfilter, cache->allow_native,
|
|
|
|
cache_prev ? cache_prev->allow_native : NULL,
|
|
|
|
SECCOMP_ARCH_NATIVE_NR,
|
|
|
|
SECCOMP_ARCH_NATIVE);
|
|
|
|
|
|
|
|
#ifdef SECCOMP_ARCH_COMPAT
|
|
|
|
seccomp_cache_prepare_bitmap(sfilter, cache->allow_compat,
|
|
|
|
cache_prev ? cache_prev->allow_compat : NULL,
|
|
|
|
SECCOMP_ARCH_COMPAT_NR,
|
|
|
|
SECCOMP_ARCH_COMPAT);
|
|
|
|
#endif /* SECCOMP_ARCH_COMPAT */
|
|
|
|
}
|
|
|
|
#endif /* SECCOMP_ARCH_NATIVE */
|
|
|
|
|
2014-06-27 22:16:33 +00:00
|
|
|
/**
|
|
|
|
* seccomp_attach_filter: validate and attach filter
|
|
|
|
* @flags: flags to change filter behavior
|
|
|
|
* @filter: seccomp filter to add to the current process
|
|
|
|
*
|
2014-06-27 22:18:48 +00:00
|
|
|
* Caller must be holding current->sighand->siglock lock.
|
|
|
|
*
|
seccomp: Make NEW_LISTENER and TSYNC flags exclusive
As the comment notes, the return codes for TSYNC and NEW_LISTENER
conflict, because they both return positive values, one in the case of
success and one in the case of error. So, let's disallow both of these
flags together.
While this is technically a userspace break, all the users I know
of are still waiting on me to land this feature in libseccomp, so I
think it'll be safe. Also, at present my use case doesn't require
TSYNC at all, so this isn't a big deal to disallow. If someone
wanted to support this, a path forward would be to add a new flag like
TSYNC_AND_LISTENER_YES_I_UNDERSTAND_THAT_TSYNC_WILL_JUST_RETURN_EAGAIN,
but the use cases are so different I don't see it really happening.
Finally, it's worth noting that this does actually fix a UAF issue: at the
end of seccomp_set_mode_filter(), we have:
if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) {
if (ret < 0) {
listener_f->private_data = NULL;
fput(listener_f);
put_unused_fd(listener);
} else {
fd_install(listener, listener_f);
ret = listener;
}
}
out_free:
seccomp_filter_free(prepared);
But if ret > 0 because TSYNC raced, we'll install the listener fd and then
free the filter out from underneath it, causing a UAF when the task closes
it or dies. This patch also switches the condition to be simply if (ret),
so that if someone does add the flag mentioned above, they won't have to
remember to fix this too.
Reported-by: syzbot+b562969adb2e04af3442@syzkaller.appspotmail.com
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
CC: stable@vger.kernel.org # v5.0+
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
2019-03-06 20:14:13 +00:00
|
|
|
* Returns 0 on success, -ve on error, or
|
|
|
|
* - in TSYNC mode: the pid of a thread which was either not in the correct
|
|
|
|
* seccomp mode or did not have an ancestral seccomp filter
|
|
|
|
* - in NEW_LISTENER mode: the fd of the new listener
|
2014-06-27 22:16:33 +00:00
|
|
|
*/
|
|
|
|
static long seccomp_attach_filter(unsigned int flags,
|
|
|
|
struct seccomp_filter *filter)
|
|
|
|
{
|
|
|
|
unsigned long total_insns;
|
|
|
|
struct seccomp_filter *walker;
|
|
|
|
|
2014-08-11 03:50:30 +00:00
|
|
|
assert_spin_locked(¤t->sighand->siglock);
|
2014-06-27 22:18:48 +00:00
|
|
|
|
2014-06-27 22:16:33 +00:00
|
|
|
/* Validate resulting filter length. */
|
|
|
|
total_insns = filter->prog->len;
|
|
|
|
for (walker = current->seccomp.filter; walker; walker = walker->prev)
|
|
|
|
total_insns += walker->prog->len + 4; /* 4 instr penalty */
|
|
|
|
if (total_insns > MAX_INSNS_PER_PATH)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2014-06-05 07:23:17 +00:00
|
|
|
/* If thread sync has been requested, check that it is possible. */
|
|
|
|
if (flags & SECCOMP_FILTER_FLAG_TSYNC) {
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = seccomp_can_sync_threads();
|
seccomp: allow TSYNC and USER_NOTIF together
The restriction introduced in 7a0df7fbc145 ("seccomp: Make NEW_LISTENER and
TSYNC flags exclusive") is mostly artificial: there is enough information
in a seccomp user notification to tell which thread triggered a
notification. The reason it was introduced is because TSYNC makes the
syscall return a thread-id on failure, and NEW_LISTENER returns an fd, and
there's no way to distinguish between these two cases (well, I suppose the
caller could check all fds it has, then do the syscall, and if the return
value was an fd that already existed, then it must be a thread id, but
bleh).
Matthew would like to use these two flags together in the Chrome sandbox
which wants to use TSYNC for video drivers and NEW_LISTENER to proxy
syscalls.
So, let's fix this ugliness by adding another flag, TSYNC_ESRCH, which
tells the kernel to just return -ESRCH on a TSYNC error. This way,
NEW_LISTENER (and any subsequent seccomp() commands that want to return
positive values) don't conflict with each other.
Suggested-by: Matthew Denton <mpdenton@google.com>
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20200304180517.23867-1-tycho@tycho.ws
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-04 18:05:17 +00:00
|
|
|
if (ret) {
|
|
|
|
if (flags & SECCOMP_FILTER_FLAG_TSYNC_ESRCH)
|
|
|
|
return -ESRCH;
|
|
|
|
else
|
|
|
|
return ret;
|
|
|
|
}
|
2014-06-05 07:23:17 +00:00
|
|
|
}
|
|
|
|
|
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for
all actions except for SECCOMP_RET_ALLOW for the given filter.
SECCOMP_RET_KILL actions are always logged, when "kill" is in the
actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged,
regardless of this flag.
This flag can be used to create noisy filters that result in all
non-allowed actions to be logged. A process may have one noisy filter,
which is loaded with this flag, as well as a quiet filter that's not
loaded with this flag. This allows for the actions in a set of filters
to be selectively conveyed to the admin.
Since a system could have a large number of allocated seccomp_filter
structs, struct packing was taken in consideration. On 64 bit x86, the
new log member takes up one byte of an existing four byte hole in the
struct. On 32 bit x86, the new log member creates a new four byte hole
(unavoidable) and consumes one of those bytes.
Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not
capable of inspecting the audit log to verify that the actions taken in
the filter were logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
|
|
|
/* Set log flag, if present. */
|
|
|
|
if (flags & SECCOMP_FILTER_FLAG_LOG)
|
|
|
|
filter->log = true;
|
|
|
|
|
2014-06-27 22:16:33 +00:00
|
|
|
/*
|
|
|
|
* If there is an existing filter, make it the prev and don't drop its
|
|
|
|
* task reference.
|
|
|
|
*/
|
|
|
|
filter->prev = current->seccomp.filter;
|
2020-10-11 15:47:43 +00:00
|
|
|
seccomp_cache_prepare(filter);
|
2014-06-27 22:16:33 +00:00
|
|
|
current->seccomp.filter = filter;
|
2020-05-13 21:11:26 +00:00
|
|
|
atomic_inc(¤t->seccomp.filter_count);
|
2014-06-27 22:16:33 +00:00
|
|
|
|
2014-06-05 07:23:17 +00:00
|
|
|
/* Now that the new filter is in place, synchronize to all threads. */
|
|
|
|
if (flags & SECCOMP_FILTER_FLAG_TSYNC)
|
2018-05-03 21:56:12 +00:00
|
|
|
seccomp_sync_threads(flags);
|
2014-06-05 07:23:17 +00:00
|
|
|
|
2014-06-27 22:16:33 +00:00
|
|
|
return 0;
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
}
|
|
|
|
|
2017-09-29 13:26:48 +00:00
|
|
|
static void __get_seccomp_filter(struct seccomp_filter *filter)
|
2017-09-27 15:25:30 +00:00
|
|
|
{
|
2020-05-31 11:50:28 +00:00
|
|
|
refcount_inc(&filter->refs);
|
2017-09-27 15:25:30 +00:00
|
|
|
}
|
|
|
|
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
/* get_seccomp_filter - increments the reference count of the filter on @tsk */
|
|
|
|
void get_seccomp_filter(struct task_struct *tsk)
|
|
|
|
{
|
|
|
|
struct seccomp_filter *orig = tsk->seccomp.filter;
|
|
|
|
if (!orig)
|
|
|
|
return;
|
2017-09-27 15:25:30 +00:00
|
|
|
__get_seccomp_filter(orig);
|
2020-05-31 11:50:30 +00:00
|
|
|
refcount_inc(&orig->users);
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
}
|
|
|
|
|
2018-09-25 09:27:20 +00:00
|
|
|
static void seccomp_init_siginfo(kernel_siginfo_t *info, int syscall, int reason)
|
2017-01-20 04:28:57 +00:00
|
|
|
{
|
2017-08-19 00:56:27 +00:00
|
|
|
clear_siginfo(info);
|
2017-01-20 04:28:57 +00:00
|
|
|
info->si_signo = SIGSYS;
|
|
|
|
info->si_code = SYS_SECCOMP;
|
|
|
|
info->si_call_addr = (void __user *)KSTK_EIP(current);
|
|
|
|
info->si_errno = reason;
|
2019-03-17 23:30:18 +00:00
|
|
|
info->si_arch = syscall_get_arch(current);
|
2017-01-20 04:28:57 +00:00
|
|
|
info->si_syscall = syscall;
|
|
|
|
}
|
|
|
|
|
2012-04-12 21:48:01 +00:00
|
|
|
/**
|
|
|
|
* seccomp_send_sigsys - signals the task to allow in-process syscall emulation
|
|
|
|
* @syscall: syscall number to send to userland
|
|
|
|
* @reason: filter-supplied reason code to send to userland (via si_errno)
|
|
|
|
*
|
|
|
|
* Forces a SIGSYS with a code of SYS_SECCOMP and related sigsys info.
|
|
|
|
*/
|
|
|
|
static void seccomp_send_sigsys(int syscall, int reason)
|
|
|
|
{
|
2018-09-25 09:27:20 +00:00
|
|
|
struct kernel_siginfo info;
|
2017-01-20 04:28:57 +00:00
|
|
|
seccomp_init_siginfo(&info, syscall, reason);
|
2019-05-15 15:11:09 +00:00
|
|
|
force_sig_info(&info);
|
2012-04-12 21:48:01 +00:00
|
|
|
}
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
#endif /* CONFIG_SECCOMP_FILTER */
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2017-08-11 04:33:54 +00:00
|
|
|
/* For use with seccomp_actions_logged */
|
2017-08-11 20:01:39 +00:00
|
|
|
#define SECCOMP_LOG_KILL_PROCESS (1 << 0)
|
|
|
|
#define SECCOMP_LOG_KILL_THREAD (1 << 1)
|
2017-08-11 04:33:54 +00:00
|
|
|
#define SECCOMP_LOG_TRAP (1 << 2)
|
|
|
|
#define SECCOMP_LOG_ERRNO (1 << 3)
|
|
|
|
#define SECCOMP_LOG_TRACE (1 << 4)
|
seccomp: Action to log before allowing
Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing
the syscall. At the implementation level, this action is identical to
the existing SECCOMP_RET_ALLOW action. However, it can be very useful when
initially developing a seccomp filter for an application. The developer
can set the default action to be SECCOMP_RET_LOG, maybe mark any
obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the
application through its paces. A list of syscalls that triggered the
default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and
that list can be used to build the syscall whitelist. Finally, the
developer can change the default action to the desired value.
This provides a more friendly experience than seeing the application get
killed, then updating the filter and rebuilding the app, seeing the
application get killed due to a different syscall, then updating the
filter and rebuilding the app, etc.
The functionality is similar to what's supported by the various LSMs.
SELinux has permissive mode, AppArmor has complain mode, SMACK has
bring-up mode, etc.
SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow
while logging is slightly more restrictive than quietly allowing.
Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of
inspecting the audit log to verify that the syscall was logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if action == RET_LOG && RET_LOG in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:57 +00:00
|
|
|
#define SECCOMP_LOG_LOG (1 << 5)
|
|
|
|
#define SECCOMP_LOG_ALLOW (1 << 6)
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
#define SECCOMP_LOG_USER_NOTIF (1 << 7)
|
2017-08-11 04:33:54 +00:00
|
|
|
|
2017-08-11 20:01:39 +00:00
|
|
|
static u32 seccomp_actions_logged = SECCOMP_LOG_KILL_PROCESS |
|
|
|
|
SECCOMP_LOG_KILL_THREAD |
|
2017-08-11 19:53:18 +00:00
|
|
|
SECCOMP_LOG_TRAP |
|
|
|
|
SECCOMP_LOG_ERRNO |
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
SECCOMP_LOG_USER_NOTIF |
|
2017-08-11 19:53:18 +00:00
|
|
|
SECCOMP_LOG_TRACE |
|
seccomp: Action to log before allowing
Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing
the syscall. At the implementation level, this action is identical to
the existing SECCOMP_RET_ALLOW action. However, it can be very useful when
initially developing a seccomp filter for an application. The developer
can set the default action to be SECCOMP_RET_LOG, maybe mark any
obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the
application through its paces. A list of syscalls that triggered the
default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and
that list can be used to build the syscall whitelist. Finally, the
developer can change the default action to the desired value.
This provides a more friendly experience than seeing the application get
killed, then updating the filter and rebuilding the app, seeing the
application get killed due to a different syscall, then updating the
filter and rebuilding the app, etc.
The functionality is similar to what's supported by the various LSMs.
SELinux has permissive mode, AppArmor has complain mode, SMACK has
bring-up mode, etc.
SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow
while logging is slightly more restrictive than quietly allowing.
Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of
inspecting the audit log to verify that the syscall was logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if action == RET_LOG && RET_LOG in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:57 +00:00
|
|
|
SECCOMP_LOG_LOG;
|
2017-08-11 04:33:54 +00:00
|
|
|
|
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for
all actions except for SECCOMP_RET_ALLOW for the given filter.
SECCOMP_RET_KILL actions are always logged, when "kill" is in the
actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged,
regardless of this flag.
This flag can be used to create noisy filters that result in all
non-allowed actions to be logged. A process may have one noisy filter,
which is loaded with this flag, as well as a quiet filter that's not
loaded with this flag. This allows for the actions in a set of filters
to be selectively conveyed to the admin.
Since a system could have a large number of allocated seccomp_filter
structs, struct packing was taken in consideration. On 64 bit x86, the
new log member takes up one byte of an existing four byte hole in the
struct. On 32 bit x86, the new log member creates a new four byte hole
(unavoidable) and consumes one of those bytes.
Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not
capable of inspecting the audit log to verify that the actions taken in
the filter were logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
|
|
|
static inline void seccomp_log(unsigned long syscall, long signr, u32 action,
|
|
|
|
bool requested)
|
2017-08-11 04:33:54 +00:00
|
|
|
{
|
|
|
|
bool log = false;
|
|
|
|
|
|
|
|
switch (action) {
|
|
|
|
case SECCOMP_RET_ALLOW:
|
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for
all actions except for SECCOMP_RET_ALLOW for the given filter.
SECCOMP_RET_KILL actions are always logged, when "kill" is in the
actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged,
regardless of this flag.
This flag can be used to create noisy filters that result in all
non-allowed actions to be logged. A process may have one noisy filter,
which is loaded with this flag, as well as a quiet filter that's not
loaded with this flag. This allows for the actions in a set of filters
to be selectively conveyed to the admin.
Since a system could have a large number of allocated seccomp_filter
structs, struct packing was taken in consideration. On 64 bit x86, the
new log member takes up one byte of an existing four byte hole in the
struct. On 32 bit x86, the new log member creates a new four byte hole
(unavoidable) and consumes one of those bytes.
Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not
capable of inspecting the audit log to verify that the actions taken in
the filter were logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
|
|
|
break;
|
2017-08-11 04:33:54 +00:00
|
|
|
case SECCOMP_RET_TRAP:
|
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for
all actions except for SECCOMP_RET_ALLOW for the given filter.
SECCOMP_RET_KILL actions are always logged, when "kill" is in the
actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged,
regardless of this flag.
This flag can be used to create noisy filters that result in all
non-allowed actions to be logged. A process may have one noisy filter,
which is loaded with this flag, as well as a quiet filter that's not
loaded with this flag. This allows for the actions in a set of filters
to be selectively conveyed to the admin.
Since a system could have a large number of allocated seccomp_filter
structs, struct packing was taken in consideration. On 64 bit x86, the
new log member takes up one byte of an existing four byte hole in the
struct. On 32 bit x86, the new log member creates a new four byte hole
(unavoidable) and consumes one of those bytes.
Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not
capable of inspecting the audit log to verify that the actions taken in
the filter were logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
|
|
|
log = requested && seccomp_actions_logged & SECCOMP_LOG_TRAP;
|
|
|
|
break;
|
2017-08-11 04:33:54 +00:00
|
|
|
case SECCOMP_RET_ERRNO:
|
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for
all actions except for SECCOMP_RET_ALLOW for the given filter.
SECCOMP_RET_KILL actions are always logged, when "kill" is in the
actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged,
regardless of this flag.
This flag can be used to create noisy filters that result in all
non-allowed actions to be logged. A process may have one noisy filter,
which is loaded with this flag, as well as a quiet filter that's not
loaded with this flag. This allows for the actions in a set of filters
to be selectively conveyed to the admin.
Since a system could have a large number of allocated seccomp_filter
structs, struct packing was taken in consideration. On 64 bit x86, the
new log member takes up one byte of an existing four byte hole in the
struct. On 32 bit x86, the new log member creates a new four byte hole
(unavoidable) and consumes one of those bytes.
Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not
capable of inspecting the audit log to verify that the actions taken in
the filter were logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
|
|
|
log = requested && seccomp_actions_logged & SECCOMP_LOG_ERRNO;
|
|
|
|
break;
|
2017-08-11 04:33:54 +00:00
|
|
|
case SECCOMP_RET_TRACE:
|
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for
all actions except for SECCOMP_RET_ALLOW for the given filter.
SECCOMP_RET_KILL actions are always logged, when "kill" is in the
actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged,
regardless of this flag.
This flag can be used to create noisy filters that result in all
non-allowed actions to be logged. A process may have one noisy filter,
which is loaded with this flag, as well as a quiet filter that's not
loaded with this flag. This allows for the actions in a set of filters
to be selectively conveyed to the admin.
Since a system could have a large number of allocated seccomp_filter
structs, struct packing was taken in consideration. On 64 bit x86, the
new log member takes up one byte of an existing four byte hole in the
struct. On 32 bit x86, the new log member creates a new four byte hole
(unavoidable) and consumes one of those bytes.
Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not
capable of inspecting the audit log to verify that the actions taken in
the filter were logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
|
|
|
log = requested && seccomp_actions_logged & SECCOMP_LOG_TRACE;
|
2017-08-11 04:33:54 +00:00
|
|
|
break;
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
case SECCOMP_RET_USER_NOTIF:
|
|
|
|
log = requested && seccomp_actions_logged & SECCOMP_LOG_USER_NOTIF;
|
|
|
|
break;
|
seccomp: Action to log before allowing
Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing
the syscall. At the implementation level, this action is identical to
the existing SECCOMP_RET_ALLOW action. However, it can be very useful when
initially developing a seccomp filter for an application. The developer
can set the default action to be SECCOMP_RET_LOG, maybe mark any
obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the
application through its paces. A list of syscalls that triggered the
default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and
that list can be used to build the syscall whitelist. Finally, the
developer can change the default action to the desired value.
This provides a more friendly experience than seeing the application get
killed, then updating the filter and rebuilding the app, seeing the
application get killed due to a different syscall, then updating the
filter and rebuilding the app, etc.
The functionality is similar to what's supported by the various LSMs.
SELinux has permissive mode, AppArmor has complain mode, SMACK has
bring-up mode, etc.
SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow
while logging is slightly more restrictive than quietly allowing.
Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of
inspecting the audit log to verify that the syscall was logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if action == RET_LOG && RET_LOG in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:57 +00:00
|
|
|
case SECCOMP_RET_LOG:
|
|
|
|
log = seccomp_actions_logged & SECCOMP_LOG_LOG;
|
|
|
|
break;
|
2017-08-11 19:53:18 +00:00
|
|
|
case SECCOMP_RET_KILL_THREAD:
|
|
|
|
log = seccomp_actions_logged & SECCOMP_LOG_KILL_THREAD;
|
2017-08-11 20:01:39 +00:00
|
|
|
break;
|
|
|
|
case SECCOMP_RET_KILL_PROCESS:
|
|
|
|
default:
|
|
|
|
log = seccomp_actions_logged & SECCOMP_LOG_KILL_PROCESS;
|
2017-08-11 04:33:54 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2018-05-04 01:08:15 +00:00
|
|
|
* Emit an audit message when the action is RET_KILL_*, RET_LOG, or the
|
|
|
|
* FILTER_FLAG_LOG bit was set. The admin has the ability to silence
|
|
|
|
* any action from being logged by removing the action name from the
|
|
|
|
* seccomp_actions_logged sysctl.
|
2017-08-11 04:33:54 +00:00
|
|
|
*/
|
2018-05-04 01:08:15 +00:00
|
|
|
if (!log)
|
|
|
|
return;
|
2017-08-11 04:33:54 +00:00
|
|
|
|
2018-05-04 01:08:15 +00:00
|
|
|
audit_seccomp(syscall, signr, action);
|
2017-08-11 04:33:54 +00:00
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* Secure computing mode 1 allows only read/write/exit/sigreturn.
|
|
|
|
* To be fully secure this must be combined with rlimit
|
|
|
|
* to limit the stack allocations too.
|
|
|
|
*/
|
2016-03-29 08:35:34 +00:00
|
|
|
static const int mode1_syscalls[] = {
|
2005-04-16 22:20:36 +00:00
|
|
|
__NR_seccomp_read, __NR_seccomp_write, __NR_seccomp_exit, __NR_seccomp_sigreturn,
|
2020-06-19 19:20:15 +00:00
|
|
|
-1, /* negative terminated */
|
2005-04-16 22:20:36 +00:00
|
|
|
};
|
|
|
|
|
seccomp,x86,arm,mips,s390: Remove nr parameter from secure_computing
The secure_computing function took a syscall number parameter, but
it only paid any attention to that parameter if seccomp mode 1 was
enabled. Rather than coming up with a kludge to get the parameter
to work in mode 2, just remove the parameter.
To avoid churn in arches that don't have seccomp filters (and may
not even support syscall_get_nr right now), this leaves the
parameter in secure_computing_strict, which is now a real function.
For ARM, this is a bit ugly due to the fact that ARM conditionally
supports seccomp filters. Fixing that would probably only be a
couple of lines of code, but it should be coordinated with the audit
maintainers.
This will be a slight slowdown on some arches. The right fix is to
pass in all of seccomp_data instead of trying to make just the
syscall nr part be fast.
This is a prerequisite for making two-phase seccomp work cleanly.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: x86@kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
2014-07-22 01:49:14 +00:00
|
|
|
static void __secure_computing_strict(int this_syscall)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2020-06-19 19:20:15 +00:00
|
|
|
const int *allowed_syscalls = mode1_syscalls;
|
seccomp,x86,arm,mips,s390: Remove nr parameter from secure_computing
The secure_computing function took a syscall number parameter, but
it only paid any attention to that parameter if seccomp mode 1 was
enabled. Rather than coming up with a kludge to get the parameter
to work in mode 2, just remove the parameter.
To avoid churn in arches that don't have seccomp filters (and may
not even support syscall_get_nr right now), this leaves the
parameter in secure_computing_strict, which is now a real function.
For ARM, this is a bit ugly due to the fact that ARM conditionally
supports seccomp filters. Fixing that would probably only be a
couple of lines of code, but it should be coordinated with the audit
maintainers.
This will be a slight slowdown on some arches. The right fix is to
pass in all of seccomp_data instead of trying to make just the
syscall nr part be fast.
This is a prerequisite for making two-phase seccomp work cleanly.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: x86@kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
2014-07-22 01:49:14 +00:00
|
|
|
#ifdef CONFIG_COMPAT
|
2016-03-22 21:24:52 +00:00
|
|
|
if (in_compat_syscall())
|
2020-06-19 19:20:15 +00:00
|
|
|
allowed_syscalls = get_compat_mode1_syscalls();
|
seccomp,x86,arm,mips,s390: Remove nr parameter from secure_computing
The secure_computing function took a syscall number parameter, but
it only paid any attention to that parameter if seccomp mode 1 was
enabled. Rather than coming up with a kludge to get the parameter
to work in mode 2, just remove the parameter.
To avoid churn in arches that don't have seccomp filters (and may
not even support syscall_get_nr right now), this leaves the
parameter in secure_computing_strict, which is now a real function.
For ARM, this is a bit ugly due to the fact that ARM conditionally
supports seccomp filters. Fixing that would probably only be a
couple of lines of code, but it should be coordinated with the audit
maintainers.
This will be a slight slowdown on some arches. The right fix is to
pass in all of seccomp_data instead of trying to make just the
syscall nr part be fast.
This is a prerequisite for making two-phase seccomp work cleanly.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: x86@kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
2014-07-22 01:49:14 +00:00
|
|
|
#endif
|
|
|
|
do {
|
2020-06-19 19:20:15 +00:00
|
|
|
if (*allowed_syscalls == this_syscall)
|
seccomp,x86,arm,mips,s390: Remove nr parameter from secure_computing
The secure_computing function took a syscall number parameter, but
it only paid any attention to that parameter if seccomp mode 1 was
enabled. Rather than coming up with a kludge to get the parameter
to work in mode 2, just remove the parameter.
To avoid churn in arches that don't have seccomp filters (and may
not even support syscall_get_nr right now), this leaves the
parameter in secure_computing_strict, which is now a real function.
For ARM, this is a bit ugly due to the fact that ARM conditionally
supports seccomp filters. Fixing that would probably only be a
couple of lines of code, but it should be coordinated with the audit
maintainers.
This will be a slight slowdown on some arches. The right fix is to
pass in all of seccomp_data instead of trying to make just the
syscall nr part be fast.
This is a prerequisite for making two-phase seccomp work cleanly.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: x86@kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
2014-07-22 01:49:14 +00:00
|
|
|
return;
|
2020-06-19 19:20:15 +00:00
|
|
|
} while (*++allowed_syscalls != -1);
|
seccomp,x86,arm,mips,s390: Remove nr parameter from secure_computing
The secure_computing function took a syscall number parameter, but
it only paid any attention to that parameter if seccomp mode 1 was
enabled. Rather than coming up with a kludge to get the parameter
to work in mode 2, just remove the parameter.
To avoid churn in arches that don't have seccomp filters (and may
not even support syscall_get_nr right now), this leaves the
parameter in secure_computing_strict, which is now a real function.
For ARM, this is a bit ugly due to the fact that ARM conditionally
supports seccomp filters. Fixing that would probably only be a
couple of lines of code, but it should be coordinated with the audit
maintainers.
This will be a slight slowdown on some arches. The right fix is to
pass in all of seccomp_data instead of trying to make just the
syscall nr part be fast.
This is a prerequisite for making two-phase seccomp work cleanly.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: x86@kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
2014-07-22 01:49:14 +00:00
|
|
|
|
|
|
|
#ifdef SECCOMP_DEBUG
|
|
|
|
dump_stack();
|
|
|
|
#endif
|
2017-08-11 19:53:18 +00:00
|
|
|
seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL_THREAD, true);
|
seccomp,x86,arm,mips,s390: Remove nr parameter from secure_computing
The secure_computing function took a syscall number parameter, but
it only paid any attention to that parameter if seccomp mode 1 was
enabled. Rather than coming up with a kludge to get the parameter
to work in mode 2, just remove the parameter.
To avoid churn in arches that don't have seccomp filters (and may
not even support syscall_get_nr right now), this leaves the
parameter in secure_computing_strict, which is now a real function.
For ARM, this is a bit ugly due to the fact that ARM conditionally
supports seccomp filters. Fixing that would probably only be a
couple of lines of code, but it should be coordinated with the audit
maintainers.
This will be a slight slowdown on some arches. The right fix is to
pass in all of seccomp_data instead of trying to make just the
syscall nr part be fast.
This is a prerequisite for making two-phase seccomp work cleanly.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: x86@kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
2014-07-22 01:49:14 +00:00
|
|
|
do_exit(SIGKILL);
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifndef CONFIG_HAVE_ARCH_SECCOMP_FILTER
|
|
|
|
void secure_computing_strict(int this_syscall)
|
|
|
|
{
|
|
|
|
int mode = current->seccomp.mode;
|
|
|
|
|
2016-08-03 20:45:50 +00:00
|
|
|
if (IS_ENABLED(CONFIG_CHECKPOINT_RESTORE) &&
|
seccomp: add ptrace options for suspend/resume
This patch is the first step in enabling checkpoint/restore of processes
with seccomp enabled.
One of the things CRIU does while dumping tasks is inject code into them
via ptrace to collect information that is only available to the process
itself. However, if we are in a seccomp mode where these processes are
prohibited from making these syscalls, then what CRIU does kills the task.
This patch adds a new ptrace option, PTRACE_O_SUSPEND_SECCOMP, that enables
a task from the init user namespace which has CAP_SYS_ADMIN and no seccomp
filters to disable (and re-enable) seccomp filters for another task so that
they can be successfully dumped (and restored). We restrict the set of
processes that can disable seccomp through ptrace because although today
ptrace can be used to bypass seccomp, there is some discussion of closing
this loophole in the future and we would like this patch to not depend on
that behavior and be future proofed for when it is removed.
Note that seccomp can be suspended before any filters are actually
installed; this behavior is useful on criu restore, so that we can suspend
seccomp, restore the filters, unmap our restore code from the restored
process' address space, and then resume the task by detaching and have the
filters resumed as well.
v2 changes:
* require that the tracer have no seccomp filters installed
* drop TIF_NOTSC manipulation from the patch
* change from ptrace command to a ptrace option and use this ptrace option
as the flag to check. This means that as soon as the tracer
detaches/dies, seccomp is re-enabled and as a corrollary that one can not
disable seccomp across PTRACE_ATTACHs.
v3 changes:
* get rid of various #ifdefs everywhere
* report more sensible errors when PTRACE_O_SUSPEND_SECCOMP is incorrectly
used
v4 changes:
* get rid of may_suspend_seccomp() in favor of a capable() check in ptrace
directly
v5 changes:
* check that seccomp is not enabled (or suspended) on the tracer
Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com>
CC: Will Drewry <wad@chromium.org>
CC: Roland McGrath <roland@hack.frob.com>
CC: Pavel Emelyanov <xemul@parallels.com>
CC: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
[kees: access seccomp.mode through seccomp_mode() instead]
Signed-off-by: Kees Cook <keescook@chromium.org>
2015-06-13 15:02:48 +00:00
|
|
|
unlikely(current->ptrace & PT_SUSPEND_SECCOMP))
|
|
|
|
return;
|
|
|
|
|
2015-06-15 22:29:16 +00:00
|
|
|
if (mode == SECCOMP_MODE_DISABLED)
|
seccomp,x86,arm,mips,s390: Remove nr parameter from secure_computing
The secure_computing function took a syscall number parameter, but
it only paid any attention to that parameter if seccomp mode 1 was
enabled. Rather than coming up with a kludge to get the parameter
to work in mode 2, just remove the parameter.
To avoid churn in arches that don't have seccomp filters (and may
not even support syscall_get_nr right now), this leaves the
parameter in secure_computing_strict, which is now a real function.
For ARM, this is a bit ugly due to the fact that ARM conditionally
supports seccomp filters. Fixing that would probably only be a
couple of lines of code, but it should be coordinated with the audit
maintainers.
This will be a slight slowdown on some arches. The right fix is to
pass in all of seccomp_data instead of trying to make just the
syscall nr part be fast.
This is a prerequisite for making two-phase seccomp work cleanly.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: x86@kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
2014-07-22 01:49:14 +00:00
|
|
|
return;
|
|
|
|
else if (mode == SECCOMP_MODE_STRICT)
|
|
|
|
__secure_computing_strict(this_syscall);
|
|
|
|
else
|
|
|
|
BUG();
|
|
|
|
}
|
|
|
|
#else
|
2014-07-22 01:49:15 +00:00
|
|
|
|
|
|
|
#ifdef CONFIG_SECCOMP_FILTER
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
static u64 seccomp_next_notify_id(struct seccomp_filter *filter)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* Note: overflow is ok here, the id just needs to be unique per
|
|
|
|
* filter.
|
|
|
|
*/
|
|
|
|
lockdep_assert_held(&filter->notify_lock);
|
|
|
|
return filter->notif->next_id++;
|
|
|
|
}
|
|
|
|
|
seccomp: Support atomic "addfd + send reply"
Alban Crequy reported a race condition userspace faces when we want to
add some fds and make the syscall return them[1] using seccomp notify.
The problem is that currently two different ioctl() calls are needed by
the process handling the syscalls (agent) for another userspace process
(target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and
SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible
for the agent to do the first ioctl to add a file descriptor but the
target is interrupted (EINTR) before the agent does the second ioctl()
call.
This patch adds a flag to the ADDFD ioctl() so it adds the fd and
returns that value atomically to the target program, as suggested by
Kees Cook[2]. This is done by simply allowing
seccomp_do_user_notification() to add the fd and return it in this case.
Therefore, in this case the target wakes up from the wait in
seccomp_do_user_notification() either to interrupt the syscall or to add
the fd and return it.
This "allocate an fd and return" functionality is useful for syscalls
that return a file descriptor only, like connect(2). Other syscalls that
return a file descriptor but not as return value (or return more than
one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not
work with this flag.
This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and
SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's
return value, nor error can be set by the user. Upon successful invocation
of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND
flag, the notifying process's errno will be 0, and the return value will
be the file descriptor number that was installed.
[1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/
Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
|
|
|
static void seccomp_handle_addfd(struct seccomp_kaddfd *addfd, struct seccomp_knotif *n)
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
{
|
seccomp: Support atomic "addfd + send reply"
Alban Crequy reported a race condition userspace faces when we want to
add some fds and make the syscall return them[1] using seccomp notify.
The problem is that currently two different ioctl() calls are needed by
the process handling the syscalls (agent) for another userspace process
(target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and
SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible
for the agent to do the first ioctl to add a file descriptor but the
target is interrupted (EINTR) before the agent does the second ioctl()
call.
This patch adds a flag to the ADDFD ioctl() so it adds the fd and
returns that value atomically to the target program, as suggested by
Kees Cook[2]. This is done by simply allowing
seccomp_do_user_notification() to add the fd and return it in this case.
Therefore, in this case the target wakes up from the wait in
seccomp_do_user_notification() either to interrupt the syscall or to add
the fd and return it.
This "allocate an fd and return" functionality is useful for syscalls
that return a file descriptor only, like connect(2). Other syscalls that
return a file descriptor but not as return value (or return more than
one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not
work with this flag.
This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and
SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's
return value, nor error can be set by the user. Upon successful invocation
of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND
flag, the notifying process's errno will be 0, and the return value will
be the file descriptor number that was installed.
[1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/
Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
|
|
|
int fd;
|
|
|
|
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
/*
|
|
|
|
* Remove the notification, and reset the list pointers, indicating
|
|
|
|
* that it has been handled.
|
|
|
|
*/
|
|
|
|
list_del_init(&addfd->list);
|
2021-03-25 08:22:09 +00:00
|
|
|
if (!addfd->setfd)
|
seccomp: Support atomic "addfd + send reply"
Alban Crequy reported a race condition userspace faces when we want to
add some fds and make the syscall return them[1] using seccomp notify.
The problem is that currently two different ioctl() calls are needed by
the process handling the syscalls (agent) for another userspace process
(target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and
SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible
for the agent to do the first ioctl to add a file descriptor but the
target is interrupted (EINTR) before the agent does the second ioctl()
call.
This patch adds a flag to the ADDFD ioctl() so it adds the fd and
returns that value atomically to the target program, as suggested by
Kees Cook[2]. This is done by simply allowing
seccomp_do_user_notification() to add the fd and return it in this case.
Therefore, in this case the target wakes up from the wait in
seccomp_do_user_notification() either to interrupt the syscall or to add
the fd and return it.
This "allocate an fd and return" functionality is useful for syscalls
that return a file descriptor only, like connect(2). Other syscalls that
return a file descriptor but not as return value (or return more than
one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not
work with this flag.
This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and
SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's
return value, nor error can be set by the user. Upon successful invocation
of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND
flag, the notifying process's errno will be 0, and the return value will
be the file descriptor number that was installed.
[1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/
Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
|
|
|
fd = receive_fd(addfd->file, addfd->flags);
|
2021-03-25 08:22:09 +00:00
|
|
|
else
|
seccomp: Support atomic "addfd + send reply"
Alban Crequy reported a race condition userspace faces when we want to
add some fds and make the syscall return them[1] using seccomp notify.
The problem is that currently two different ioctl() calls are needed by
the process handling the syscalls (agent) for another userspace process
(target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and
SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible
for the agent to do the first ioctl to add a file descriptor but the
target is interrupted (EINTR) before the agent does the second ioctl()
call.
This patch adds a flag to the ADDFD ioctl() so it adds the fd and
returns that value atomically to the target program, as suggested by
Kees Cook[2]. This is done by simply allowing
seccomp_do_user_notification() to add the fd and return it in this case.
Therefore, in this case the target wakes up from the wait in
seccomp_do_user_notification() either to interrupt the syscall or to add
the fd and return it.
This "allocate an fd and return" functionality is useful for syscalls
that return a file descriptor only, like connect(2). Other syscalls that
return a file descriptor but not as return value (or return more than
one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not
work with this flag.
This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and
SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's
return value, nor error can be set by the user. Upon successful invocation
of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND
flag, the notifying process's errno will be 0, and the return value will
be the file descriptor number that was installed.
[1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/
Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
|
|
|
fd = receive_fd_replace(addfd->fd, addfd->file, addfd->flags);
|
|
|
|
addfd->ret = fd;
|
|
|
|
|
|
|
|
if (addfd->ioctl_flags & SECCOMP_ADDFD_FLAG_SEND) {
|
|
|
|
/* If we fail reset and return an error to the notifier */
|
|
|
|
if (fd < 0) {
|
|
|
|
n->state = SECCOMP_NOTIFY_SENT;
|
|
|
|
} else {
|
|
|
|
/* Return the FD we just added */
|
|
|
|
n->flags = 0;
|
|
|
|
n->error = 0;
|
|
|
|
n->val = fd;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Mark the notification as completed. From this point, addfd mem
|
|
|
|
* might be invalidated and we can't safely read it anymore.
|
|
|
|
*/
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
complete(&addfd->completion);
|
|
|
|
}
|
|
|
|
|
2019-09-20 08:30:05 +00:00
|
|
|
static int seccomp_do_user_notification(int this_syscall,
|
|
|
|
struct seccomp_filter *match,
|
|
|
|
const struct seccomp_data *sd)
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
{
|
|
|
|
int err;
|
2019-09-20 08:30:05 +00:00
|
|
|
u32 flags = 0;
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
long ret = 0;
|
|
|
|
struct seccomp_knotif n = {};
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
struct seccomp_kaddfd *addfd, *tmp;
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
|
|
|
|
mutex_lock(&match->notify_lock);
|
|
|
|
err = -ENOSYS;
|
|
|
|
if (!match->notif)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
n.task = current;
|
|
|
|
n.state = SECCOMP_NOTIFY_INIT;
|
|
|
|
n.data = sd;
|
|
|
|
n.id = seccomp_next_notify_id(match);
|
|
|
|
init_completion(&n.ready);
|
|
|
|
list_add(&n.list, &match->notif->notifications);
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
INIT_LIST_HEAD(&n.addfd);
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
|
|
|
|
up(&match->notif->request);
|
2020-06-01 18:50:07 +00:00
|
|
|
wake_up_poll(&match->wqh, EPOLLIN | EPOLLRDNORM);
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* This is where we wait for a reply from userspace.
|
|
|
|
*/
|
2021-05-17 19:39:06 +00:00
|
|
|
do {
|
|
|
|
mutex_unlock(&match->notify_lock);
|
|
|
|
err = wait_for_completion_interruptible(&n.ready);
|
|
|
|
mutex_lock(&match->notify_lock);
|
|
|
|
if (err != 0)
|
|
|
|
goto interrupted;
|
|
|
|
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
addfd = list_first_entry_or_null(&n.addfd,
|
|
|
|
struct seccomp_kaddfd, list);
|
2021-05-17 19:39:06 +00:00
|
|
|
/* Check if we were woken up by a addfd message */
|
|
|
|
if (addfd)
|
seccomp: Support atomic "addfd + send reply"
Alban Crequy reported a race condition userspace faces when we want to
add some fds and make the syscall return them[1] using seccomp notify.
The problem is that currently two different ioctl() calls are needed by
the process handling the syscalls (agent) for another userspace process
(target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and
SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible
for the agent to do the first ioctl to add a file descriptor but the
target is interrupted (EINTR) before the agent does the second ioctl()
call.
This patch adds a flag to the ADDFD ioctl() so it adds the fd and
returns that value atomically to the target program, as suggested by
Kees Cook[2]. This is done by simply allowing
seccomp_do_user_notification() to add the fd and return it in this case.
Therefore, in this case the target wakes up from the wait in
seccomp_do_user_notification() either to interrupt the syscall or to add
the fd and return it.
This "allocate an fd and return" functionality is useful for syscalls
that return a file descriptor only, like connect(2). Other syscalls that
return a file descriptor but not as return value (or return more than
one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not
work with this flag.
This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and
SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's
return value, nor error can be set by the user. Upon successful invocation
of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND
flag, the notifying process's errno will be 0, and the return value will
be the file descriptor number that was installed.
[1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/
Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
|
|
|
seccomp_handle_addfd(addfd, &n);
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
|
2021-05-17 19:39:06 +00:00
|
|
|
} while (n.state != SECCOMP_NOTIFY_REPLIED);
|
|
|
|
|
|
|
|
ret = n.val;
|
|
|
|
err = n.error;
|
|
|
|
flags = n.flags;
|
|
|
|
|
|
|
|
interrupted:
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
/* If there were any pending addfd calls, clear them out */
|
|
|
|
list_for_each_entry_safe(addfd, tmp, &n.addfd, list) {
|
|
|
|
/* The process went away before we got a chance to handle it */
|
|
|
|
addfd->ret = -ESRCH;
|
|
|
|
list_del_init(&addfd->list);
|
|
|
|
complete(&addfd->completion);
|
|
|
|
}
|
|
|
|
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
/*
|
|
|
|
* Note that it's possible the listener died in between the time when
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
* we were notified of a response (or a signal) and when we were able to
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
* re-acquire the lock, so only delete from the list if the
|
|
|
|
* notification actually exists.
|
|
|
|
*
|
|
|
|
* Also note that this test is only valid because there's no way to
|
|
|
|
* *reattach* to a notifier right now. If one is added, we'll need to
|
|
|
|
* keep track of the notif itself and make sure they match here.
|
|
|
|
*/
|
|
|
|
if (match->notif)
|
|
|
|
list_del(&n.list);
|
|
|
|
out:
|
|
|
|
mutex_unlock(&match->notify_lock);
|
2019-09-20 08:30:05 +00:00
|
|
|
|
|
|
|
/* Userspace requests to continue the syscall. */
|
|
|
|
if (flags & SECCOMP_USER_NOTIF_FLAG_CONTINUE)
|
|
|
|
return 0;
|
|
|
|
|
2020-08-24 12:59:21 +00:00
|
|
|
syscall_set_return_value(current, current_pt_regs(),
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
err, ret);
|
2019-09-20 08:30:05 +00:00
|
|
|
return -1;
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
}
|
|
|
|
|
2016-06-02 02:29:15 +00:00
|
|
|
static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd,
|
|
|
|
const bool recheck_after_trace)
|
2014-07-22 01:49:15 +00:00
|
|
|
{
|
|
|
|
u32 filter_ret, action;
|
2017-08-02 22:00:40 +00:00
|
|
|
struct seccomp_filter *match = NULL;
|
2014-07-22 01:49:15 +00:00
|
|
|
int data;
|
2018-12-09 18:24:11 +00:00
|
|
|
struct seccomp_data sd_local;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2014-06-27 22:01:35 +00:00
|
|
|
/*
|
|
|
|
* Make sure that any changes to mode from another thread have
|
2020-11-16 17:42:00 +00:00
|
|
|
* been seen after SYSCALL_WORK_SECCOMP was seen.
|
2014-06-27 22:01:35 +00:00
|
|
|
*/
|
seccomp: Improve performace by optimizing rmb()
According to Kees's suggest, we started with the patch that just replaces
rmb() with smp_rmb() and did a performance test with UnixBench. The
results showed the overhead about 2.53% in rmb() test compared to the
smp_rmb() one, in a x86-64 kernel with CONFIG_SMP enabled running inside a
qemu-kvm vm. The test is a "syscall" testcase in UnixBench, which executes
5 syscalls in a loop during a certain timeout (100 second in our test) and
counts the total number of executions of this 5-syscall sequence. We set
a seccomp filter with all allow rule for all used syscalls in this test
(which will go bitmap path) to make sure the rmb() will be executed. The
details for the test:
with rmb():
/txm # ./syscall_allow_min 100
COUNT|35861159|1|lps
/txm # ./syscall_allow_min 100
COUNT|35545501|1|lps
/txm # ./syscall_allow_min 100
COUNT|35664495|1|lps
with smp_rmb():
/txm # ./syscall_allow_min 100
COUNT|36552771|1|lps
/txm # ./syscall_allow_min 100
COUNT|36491247|1|lps
/txm # ./syscall_allow_min 100
COUNT|36504746|1|lps
For a x86-64 kernel with CONFIG_SMP enabled, the smp_rmb() is just a
compiler barrier() which have no impact in runtime, while rmb() is a
lfence which will prevent all memory access operations (not just load
according the recently claim by Intel) behind itself. We can also figure
it out in disassembly:
with rmb():
0000000000001430 <__seccomp_filter>:
1430: 41 57 push %r15
1432: 41 56 push %r14
1434: 41 55 push %r13
1436: 41 54 push %r12
1438: 55 push %rbp
1439: 53 push %rbx
143a: 48 81 ec 90 00 00 00 sub $0x90,%rsp
1441: 89 7c 24 10 mov %edi,0x10(%rsp)
1445: 89 54 24 14 mov %edx,0x14(%rsp)
1449: 65 48 8b 04 25 28 00 mov %gs:0x28,%rax
1450: 00 00
1452: 48 89 84 24 88 00 00 mov %rax,0x88(%rsp)
1459: 00
145a: 31 c0 xor %eax,%eax
* 145c: 0f ae e8 lfence
145f: 48 85 f6 test %rsi,%rsi
1462: 49 89 f4 mov %rsi,%r12
1465: 0f 84 42 03 00 00 je 17ad <__seccomp_filter+0x37d>
146b: 65 48 8b 04 25 00 00 mov %gs:0x0,%rax
1472: 00 00
1474: 48 8b 98 80 07 00 00 mov 0x780(%rax),%rbx
147b: 48 85 db test %rbx,%rbx
with smp_rmb();
0000000000001430 <__seccomp_filter>:
1430: 41 57 push %r15
1432: 41 56 push %r14
1434: 41 55 push %r13
1436: 41 54 push %r12
1438: 55 push %rbp
1439: 53 push %rbx
143a: 48 81 ec 90 00 00 00 sub $0x90,%rsp
1441: 89 7c 24 10 mov %edi,0x10(%rsp)
1445: 89 54 24 14 mov %edx,0x14(%rsp)
1449: 65 48 8b 04 25 28 00 mov %gs:0x28,%rax
1450: 00 00
1452: 48 89 84 24 88 00 00 mov %rax,0x88(%rsp)
1459: 00
145a: 31 c0 xor %eax,%eax
145c: 48 85 f6 test %rsi,%rsi
145f: 49 89 f4 mov %rsi,%r12
1462: 0f 84 42 03 00 00 je 17aa <__seccomp_filter+0x37a>
1468: 65 48 8b 04 25 00 00 mov %gs:0x0,%rax
146f: 00 00
1471: 48 8b 98 80 07 00 00 mov 0x780(%rax),%rbx
1478: 48 85 db test %rbx,%rbx
Signed-off-by: wanghongzhe <wanghongzhe@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/1612496049-32507-1-git-send-email-wanghongzhe@huawei.com
2021-02-05 03:34:09 +00:00
|
|
|
smp_rmb();
|
2014-06-27 22:01:35 +00:00
|
|
|
|
2018-12-09 18:24:11 +00:00
|
|
|
if (!sd) {
|
|
|
|
populate_seccomp_data(&sd_local);
|
|
|
|
sd = &sd_local;
|
|
|
|
}
|
|
|
|
|
2017-08-02 22:00:40 +00:00
|
|
|
filter_ret = seccomp_run_filters(sd, &match);
|
2014-07-22 01:49:15 +00:00
|
|
|
data = filter_ret & SECCOMP_RET_DATA;
|
seccomp: Implement SECCOMP_RET_KILL_PROCESS action
Right now, SECCOMP_RET_KILL_THREAD (neé SECCOMP_RET_KILL) kills the
current thread. There have been a few requests for this to kill the entire
process (the thread group). This cannot be just changed (discovered when
adding coredump support since coredumping kills the entire process)
because there are userspace programs depending on the thread-kill
behavior.
Instead, implement SECCOMP_RET_KILL_PROCESS, which is 0x80000000, and can
be processed as "-1" by the kernel, below the existing RET_KILL that is
ABI-set to "0". For userspace, SECCOMP_RET_ACTION_FULL is added to expand
the mask to the signed bit. Old userspace using the SECCOMP_RET_ACTION
mask will see SECCOMP_RET_KILL_PROCESS as 0 still, but this would only
be visible when examining the siginfo in a core dump from a RET_KILL_*,
where it will think it was thread-killed instead of process-killed.
Attempts to introduce this behavior via other ways (filter flags,
seccomp struct flags, masked RET_DATA bits) all come with weird
side-effects and baggage. This change preserves the central behavioral
expectations of the seccomp filter engine without putting too great
a burden on changes needed in userspace to use the new action.
The new action is discoverable by userspace through either the new
actions_avail sysctl or through the SECCOMP_GET_ACTION_AVAIL seccomp
operation. If used without checking for availability, old kernels
will treat RET_KILL_PROCESS as RET_KILL_THREAD (since the old mask
will produce RET_KILL_THREAD).
Cc: Paul Moore <paul@paul-moore.com>
Cc: Fabricio Voznika <fvoznika@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 20:12:11 +00:00
|
|
|
action = filter_ret & SECCOMP_RET_ACTION_FULL;
|
2014-07-22 01:49:15 +00:00
|
|
|
|
|
|
|
switch (action) {
|
|
|
|
case SECCOMP_RET_ERRNO:
|
2015-02-17 21:48:00 +00:00
|
|
|
/* Set low-order bits as an errno, capped at MAX_ERRNO. */
|
|
|
|
if (data > MAX_ERRNO)
|
|
|
|
data = MAX_ERRNO;
|
2020-08-24 12:59:21 +00:00
|
|
|
syscall_set_return_value(current, current_pt_regs(),
|
2014-07-22 01:49:15 +00:00
|
|
|
-data, 0);
|
|
|
|
goto skip;
|
|
|
|
|
|
|
|
case SECCOMP_RET_TRAP:
|
|
|
|
/* Show the handler the original registers. */
|
2020-08-24 12:59:21 +00:00
|
|
|
syscall_rollback(current, current_pt_regs());
|
2014-07-22 01:49:15 +00:00
|
|
|
/* Let the filter pass back 16 bits of data. */
|
|
|
|
seccomp_send_sigsys(this_syscall, data);
|
|
|
|
goto skip;
|
|
|
|
|
|
|
|
case SECCOMP_RET_TRACE:
|
2016-06-02 02:29:15 +00:00
|
|
|
/* We've been put in this state by the ptracer already. */
|
|
|
|
if (recheck_after_trace)
|
|
|
|
return 0;
|
|
|
|
|
2016-06-01 23:02:17 +00:00
|
|
|
/* ENOSYS these calls if there is no tracer attached. */
|
|
|
|
if (!ptrace_event_enabled(current, PTRACE_EVENT_SECCOMP)) {
|
|
|
|
syscall_set_return_value(current,
|
2020-08-24 12:59:21 +00:00
|
|
|
current_pt_regs(),
|
2016-06-01 23:02:17 +00:00
|
|
|
-ENOSYS, 0);
|
|
|
|
goto skip;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Allow the BPF to provide the event message */
|
|
|
|
ptrace_event(PTRACE_EVENT_SECCOMP, data);
|
|
|
|
/*
|
|
|
|
* The delivery of a fatal signal during event
|
2016-08-10 23:28:09 +00:00
|
|
|
* notification may silently skip tracer notification,
|
|
|
|
* which could leave us with a potentially unmodified
|
|
|
|
* syscall that the tracer would have liked to have
|
|
|
|
* changed. Since the process is about to die, we just
|
|
|
|
* force the syscall to be skipped and let the signal
|
|
|
|
* kill the process and correctly handle any tracer exit
|
|
|
|
* notifications.
|
2016-06-01 23:02:17 +00:00
|
|
|
*/
|
|
|
|
if (fatal_signal_pending(current))
|
2016-08-10 23:28:09 +00:00
|
|
|
goto skip;
|
2016-06-01 23:02:17 +00:00
|
|
|
/* Check if the tracer forced the syscall to be skipped. */
|
2020-08-24 12:59:21 +00:00
|
|
|
this_syscall = syscall_get_nr(current, current_pt_regs());
|
2016-06-01 23:02:17 +00:00
|
|
|
if (this_syscall < 0)
|
|
|
|
goto skip;
|
|
|
|
|
2016-06-02 02:29:15 +00:00
|
|
|
/*
|
|
|
|
* Recheck the syscall, since it may have changed. This
|
|
|
|
* intentionally uses a NULL struct seccomp_data to force
|
|
|
|
* a reload of all registers. This does not goto skip since
|
|
|
|
* a skip would have already been reported.
|
|
|
|
*/
|
|
|
|
if (__seccomp_filter(this_syscall, NULL, true))
|
|
|
|
return -1;
|
|
|
|
|
2016-06-01 23:02:17 +00:00
|
|
|
return 0;
|
2014-07-22 01:49:15 +00:00
|
|
|
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
case SECCOMP_RET_USER_NOTIF:
|
2019-09-20 08:30:05 +00:00
|
|
|
if (seccomp_do_user_notification(this_syscall, match, sd))
|
|
|
|
goto skip;
|
|
|
|
|
|
|
|
return 0;
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
|
seccomp: Action to log before allowing
Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing
the syscall. At the implementation level, this action is identical to
the existing SECCOMP_RET_ALLOW action. However, it can be very useful when
initially developing a seccomp filter for an application. The developer
can set the default action to be SECCOMP_RET_LOG, maybe mark any
obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the
application through its paces. A list of syscalls that triggered the
default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and
that list can be used to build the syscall whitelist. Finally, the
developer can change the default action to the desired value.
This provides a more friendly experience than seeing the application get
killed, then updating the filter and rebuilding the app, seeing the
application get killed due to a different syscall, then updating the
filter and rebuilding the app, etc.
The functionality is similar to what's supported by the various LSMs.
SELinux has permissive mode, AppArmor has complain mode, SMACK has
bring-up mode, etc.
SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow
while logging is slightly more restrictive than quietly allowing.
Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of
inspecting the audit log to verify that the syscall was logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if action == RET_LOG && RET_LOG in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:57 +00:00
|
|
|
case SECCOMP_RET_LOG:
|
|
|
|
seccomp_log(this_syscall, 0, action, true);
|
|
|
|
return 0;
|
|
|
|
|
2014-07-22 01:49:15 +00:00
|
|
|
case SECCOMP_RET_ALLOW:
|
2017-08-02 22:00:40 +00:00
|
|
|
/*
|
|
|
|
* Note that the "match" filter will always be NULL for
|
|
|
|
* this action since SECCOMP_RET_ALLOW is the starting
|
|
|
|
* state in seccomp_run_filters().
|
|
|
|
*/
|
2016-06-01 23:02:17 +00:00
|
|
|
return 0;
|
2014-07-22 01:49:15 +00:00
|
|
|
|
2017-08-11 19:53:18 +00:00
|
|
|
case SECCOMP_RET_KILL_THREAD:
|
2017-08-11 20:01:39 +00:00
|
|
|
case SECCOMP_RET_KILL_PROCESS:
|
2017-02-23 17:24:24 +00:00
|
|
|
default:
|
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for
all actions except for SECCOMP_RET_ALLOW for the given filter.
SECCOMP_RET_KILL actions are always logged, when "kill" is in the
actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged,
regardless of this flag.
This flag can be used to create noisy filters that result in all
non-allowed actions to be logged. A process may have one noisy filter,
which is loaded with this flag, as well as a quiet filter that's not
loaded with this flag. This allows for the actions in a set of filters
to be selectively conveyed to the admin.
Since a system could have a large number of allocated seccomp_filter
structs, struct packing was taken in consideration. On 64 bit x86, the
new log member takes up one byte of an existing four byte hole in the
struct. On 32 bit x86, the new log member creates a new four byte hole
(unavoidable) and consumes one of those bytes.
Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not
capable of inspecting the audit log to verify that the actions taken in
the filter were logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
|
|
|
seccomp_log(this_syscall, SIGSYS, action, true);
|
2017-02-07 23:18:51 +00:00
|
|
|
/* Dump core only if this is the last remaining thread. */
|
2020-08-29 01:56:13 +00:00
|
|
|
if (action != SECCOMP_RET_KILL_THREAD ||
|
2017-08-11 20:01:39 +00:00
|
|
|
get_nr_threads(current) == 1) {
|
2018-09-25 09:27:20 +00:00
|
|
|
kernel_siginfo_t info;
|
2017-02-23 17:24:24 +00:00
|
|
|
|
2017-02-07 23:18:51 +00:00
|
|
|
/* Show the original registers in the dump. */
|
2020-08-24 12:59:21 +00:00
|
|
|
syscall_rollback(current, current_pt_regs());
|
2017-02-07 23:18:51 +00:00
|
|
|
/* Trigger a manual coredump since do_exit skips it. */
|
|
|
|
seccomp_init_siginfo(&info, this_syscall, data);
|
|
|
|
do_coredump(&info);
|
|
|
|
}
|
2020-08-29 01:56:13 +00:00
|
|
|
if (action == SECCOMP_RET_KILL_THREAD)
|
2017-08-11 20:01:39 +00:00
|
|
|
do_exit(SIGSYS);
|
2020-08-29 01:56:13 +00:00
|
|
|
else
|
|
|
|
do_group_exit(SIGSYS);
|
2014-07-22 01:49:15 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
unreachable();
|
|
|
|
|
|
|
|
skip:
|
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for
all actions except for SECCOMP_RET_ALLOW for the given filter.
SECCOMP_RET_KILL actions are always logged, when "kill" is in the
actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged,
regardless of this flag.
This flag can be used to create noisy filters that result in all
non-allowed actions to be logged. A process may have one noisy filter,
which is loaded with this flag, as well as a quiet filter that's not
loaded with this flag. This allows for the actions in a set of filters
to be selectively conveyed to the admin.
Since a system could have a large number of allocated seccomp_filter
structs, struct packing was taken in consideration. On 64 bit x86, the
new log member takes up one byte of an existing four byte hole in the
struct. On 32 bit x86, the new log member creates a new four byte hole
(unavoidable) and consumes one of those bytes.
Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not
capable of inspecting the audit log to verify that the actions taken in
the filter were logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
|
|
|
seccomp_log(this_syscall, 0, action, match ? match->log : false);
|
2016-06-01 23:02:17 +00:00
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
#else
|
2016-06-02 02:29:15 +00:00
|
|
|
static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd,
|
|
|
|
const bool recheck_after_trace)
|
2016-06-01 23:02:17 +00:00
|
|
|
{
|
|
|
|
BUG();
|
2021-01-11 17:28:39 +00:00
|
|
|
|
|
|
|
return -1;
|
2014-07-22 01:49:15 +00:00
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
#endif
|
2014-07-22 01:49:15 +00:00
|
|
|
|
2016-06-01 23:02:17 +00:00
|
|
|
int __secure_computing(const struct seccomp_data *sd)
|
2014-07-22 01:49:15 +00:00
|
|
|
{
|
|
|
|
int mode = current->seccomp.mode;
|
2016-06-01 23:02:17 +00:00
|
|
|
int this_syscall;
|
2014-07-22 01:49:15 +00:00
|
|
|
|
2016-08-03 20:45:50 +00:00
|
|
|
if (IS_ENABLED(CONFIG_CHECKPOINT_RESTORE) &&
|
seccomp: add ptrace options for suspend/resume
This patch is the first step in enabling checkpoint/restore of processes
with seccomp enabled.
One of the things CRIU does while dumping tasks is inject code into them
via ptrace to collect information that is only available to the process
itself. However, if we are in a seccomp mode where these processes are
prohibited from making these syscalls, then what CRIU does kills the task.
This patch adds a new ptrace option, PTRACE_O_SUSPEND_SECCOMP, that enables
a task from the init user namespace which has CAP_SYS_ADMIN and no seccomp
filters to disable (and re-enable) seccomp filters for another task so that
they can be successfully dumped (and restored). We restrict the set of
processes that can disable seccomp through ptrace because although today
ptrace can be used to bypass seccomp, there is some discussion of closing
this loophole in the future and we would like this patch to not depend on
that behavior and be future proofed for when it is removed.
Note that seccomp can be suspended before any filters are actually
installed; this behavior is useful on criu restore, so that we can suspend
seccomp, restore the filters, unmap our restore code from the restored
process' address space, and then resume the task by detaching and have the
filters resumed as well.
v2 changes:
* require that the tracer have no seccomp filters installed
* drop TIF_NOTSC manipulation from the patch
* change from ptrace command to a ptrace option and use this ptrace option
as the flag to check. This means that as soon as the tracer
detaches/dies, seccomp is re-enabled and as a corrollary that one can not
disable seccomp across PTRACE_ATTACHs.
v3 changes:
* get rid of various #ifdefs everywhere
* report more sensible errors when PTRACE_O_SUSPEND_SECCOMP is incorrectly
used
v4 changes:
* get rid of may_suspend_seccomp() in favor of a capable() check in ptrace
directly
v5 changes:
* check that seccomp is not enabled (or suspended) on the tracer
Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com>
CC: Will Drewry <wad@chromium.org>
CC: Roland McGrath <roland@hack.frob.com>
CC: Pavel Emelyanov <xemul@parallels.com>
CC: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
[kees: access seccomp.mode through seccomp_mode() instead]
Signed-off-by: Kees Cook <keescook@chromium.org>
2015-06-13 15:02:48 +00:00
|
|
|
unlikely(current->ptrace & PT_SUSPEND_SECCOMP))
|
2016-06-01 23:02:17 +00:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
this_syscall = sd ? sd->nr :
|
2020-08-24 12:59:21 +00:00
|
|
|
syscall_get_nr(current, current_pt_regs());
|
seccomp: add ptrace options for suspend/resume
This patch is the first step in enabling checkpoint/restore of processes
with seccomp enabled.
One of the things CRIU does while dumping tasks is inject code into them
via ptrace to collect information that is only available to the process
itself. However, if we are in a seccomp mode where these processes are
prohibited from making these syscalls, then what CRIU does kills the task.
This patch adds a new ptrace option, PTRACE_O_SUSPEND_SECCOMP, that enables
a task from the init user namespace which has CAP_SYS_ADMIN and no seccomp
filters to disable (and re-enable) seccomp filters for another task so that
they can be successfully dumped (and restored). We restrict the set of
processes that can disable seccomp through ptrace because although today
ptrace can be used to bypass seccomp, there is some discussion of closing
this loophole in the future and we would like this patch to not depend on
that behavior and be future proofed for when it is removed.
Note that seccomp can be suspended before any filters are actually
installed; this behavior is useful on criu restore, so that we can suspend
seccomp, restore the filters, unmap our restore code from the restored
process' address space, and then resume the task by detaching and have the
filters resumed as well.
v2 changes:
* require that the tracer have no seccomp filters installed
* drop TIF_NOTSC manipulation from the patch
* change from ptrace command to a ptrace option and use this ptrace option
as the flag to check. This means that as soon as the tracer
detaches/dies, seccomp is re-enabled and as a corrollary that one can not
disable seccomp across PTRACE_ATTACHs.
v3 changes:
* get rid of various #ifdefs everywhere
* report more sensible errors when PTRACE_O_SUSPEND_SECCOMP is incorrectly
used
v4 changes:
* get rid of may_suspend_seccomp() in favor of a capable() check in ptrace
directly
v5 changes:
* check that seccomp is not enabled (or suspended) on the tracer
Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com>
CC: Will Drewry <wad@chromium.org>
CC: Roland McGrath <roland@hack.frob.com>
CC: Pavel Emelyanov <xemul@parallels.com>
CC: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
[kees: access seccomp.mode through seccomp_mode() instead]
Signed-off-by: Kees Cook <keescook@chromium.org>
2015-06-13 15:02:48 +00:00
|
|
|
|
2014-07-22 01:49:15 +00:00
|
|
|
switch (mode) {
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
case SECCOMP_MODE_STRICT:
|
2014-07-22 01:49:15 +00:00
|
|
|
__secure_computing_strict(this_syscall); /* may call do_exit */
|
2016-06-01 23:02:17 +00:00
|
|
|
return 0;
|
2014-07-22 01:49:15 +00:00
|
|
|
case SECCOMP_MODE_FILTER:
|
2016-06-02 02:29:15 +00:00
|
|
|
return __seccomp_filter(this_syscall, sd, false);
|
2005-04-16 22:20:36 +00:00
|
|
|
default:
|
|
|
|
BUG();
|
|
|
|
}
|
2014-07-22 01:49:15 +00:00
|
|
|
}
|
seccomp,x86,arm,mips,s390: Remove nr parameter from secure_computing
The secure_computing function took a syscall number parameter, but
it only paid any attention to that parameter if seccomp mode 1 was
enabled. Rather than coming up with a kludge to get the parameter
to work in mode 2, just remove the parameter.
To avoid churn in arches that don't have seccomp filters (and may
not even support syscall_get_nr right now), this leaves the
parameter in secure_computing_strict, which is now a real function.
For ARM, this is a bit ugly due to the fact that ARM conditionally
supports seccomp filters. Fixing that would probably only be a
couple of lines of code, but it should be coordinated with the audit
maintainers.
This will be a slight slowdown on some arches. The right fix is to
pass in all of seccomp_data instead of trying to make just the
syscall nr part be fast.
This is a prerequisite for making two-phase seccomp work cleanly.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: x86@kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
2014-07-22 01:49:14 +00:00
|
|
|
#endif /* CONFIG_HAVE_ARCH_SECCOMP_FILTER */
|
2007-07-16 06:41:32 +00:00
|
|
|
|
|
|
|
long prctl_get_seccomp(void)
|
|
|
|
{
|
|
|
|
return current->seccomp.mode;
|
|
|
|
}
|
|
|
|
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
/**
|
2014-06-25 22:55:25 +00:00
|
|
|
* seccomp_set_mode_strict: internal function for setting strict seccomp
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
*
|
|
|
|
* Once current->seccomp.mode is non-zero, it may not be changed.
|
|
|
|
*
|
|
|
|
* Returns 0 on success or -EINVAL on failure.
|
|
|
|
*/
|
2014-06-25 22:55:25 +00:00
|
|
|
static long seccomp_set_mode_strict(void)
|
2007-07-16 06:41:32 +00:00
|
|
|
{
|
2014-06-25 22:55:25 +00:00
|
|
|
const unsigned long seccomp_mode = SECCOMP_MODE_STRICT;
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
long ret = -EINVAL;
|
2007-07-16 06:41:32 +00:00
|
|
|
|
2014-06-27 22:18:48 +00:00
|
|
|
spin_lock_irq(¤t->sighand->siglock);
|
|
|
|
|
2014-06-25 22:38:02 +00:00
|
|
|
if (!seccomp_may_assign_mode(seccomp_mode))
|
2007-07-16 06:41:32 +00:00
|
|
|
goto out;
|
|
|
|
|
2007-07-16 06:41:33 +00:00
|
|
|
#ifdef TIF_NOTSC
|
2014-06-25 22:55:25 +00:00
|
|
|
disable_TSC();
|
2007-07-16 06:41:33 +00:00
|
|
|
#endif
|
2018-05-03 21:56:12 +00:00
|
|
|
seccomp_assign_mode(current, seccomp_mode, 0);
|
2014-06-25 22:55:25 +00:00
|
|
|
ret = 0;
|
|
|
|
|
|
|
|
out:
|
2014-06-27 22:18:48 +00:00
|
|
|
spin_unlock_irq(¤t->sighand->siglock);
|
2014-06-25 22:55:25 +00:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
#ifdef CONFIG_SECCOMP_FILTER
|
2020-09-02 14:09:53 +00:00
|
|
|
static void seccomp_notify_free(struct seccomp_filter *filter)
|
|
|
|
{
|
|
|
|
kfree(filter->notif);
|
|
|
|
filter->notif = NULL;
|
|
|
|
}
|
|
|
|
|
seccomp: don't leak memory when filter install races
In seccomp_set_mode_filter() with TSYNC | NEW_LISTENER, we first initialize
the listener fd, then check to see if we can actually use it later in
seccomp_may_assign_mode(), which can fail if anyone else in our thread
group has installed a filter and caused some divergence. If we can't, we
partially clean up the newly allocated file: we put the fd, put the file,
but don't actually clean up the *memory* that was allocated at
filter->notif. Let's clean that up too.
To accomplish this, let's hoist the actual "detach a notifier from a
filter" code to its own helper out of seccomp_notify_release(), so that in
case anyone adds stuff to init_listener(), they only have to add the
cleanup code in one spot. This does a bit of extra locking and such on the
failure path when the filter is not attached, but it's a slow failure path
anyway.
Fixes: 51891498f2da ("seccomp: allow TSYNC and USER_NOTIF together")
Reported-by: syzbot+3ad9614a12f80994c32e@syzkaller.appspotmail.com
Signed-off-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200902014017.934315-1-tycho@tycho.pizza
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-09-02 01:40:16 +00:00
|
|
|
static void seccomp_notify_detach(struct seccomp_filter *filter)
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
{
|
|
|
|
struct seccomp_knotif *knotif;
|
|
|
|
|
2019-01-12 18:24:20 +00:00
|
|
|
if (!filter)
|
seccomp: don't leak memory when filter install races
In seccomp_set_mode_filter() with TSYNC | NEW_LISTENER, we first initialize
the listener fd, then check to see if we can actually use it later in
seccomp_may_assign_mode(), which can fail if anyone else in our thread
group has installed a filter and caused some divergence. If we can't, we
partially clean up the newly allocated file: we put the fd, put the file,
but don't actually clean up the *memory* that was allocated at
filter->notif. Let's clean that up too.
To accomplish this, let's hoist the actual "detach a notifier from a
filter" code to its own helper out of seccomp_notify_release(), so that in
case anyone adds stuff to init_listener(), they only have to add the
cleanup code in one spot. This does a bit of extra locking and such on the
failure path when the filter is not attached, but it's a slow failure path
anyway.
Fixes: 51891498f2da ("seccomp: allow TSYNC and USER_NOTIF together")
Reported-by: syzbot+3ad9614a12f80994c32e@syzkaller.appspotmail.com
Signed-off-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200902014017.934315-1-tycho@tycho.pizza
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-09-02 01:40:16 +00:00
|
|
|
return;
|
2019-01-12 18:24:20 +00:00
|
|
|
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
mutex_lock(&filter->notify_lock);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If this file is being closed because e.g. the task who owned it
|
|
|
|
* died, let's wake everyone up who was waiting on us.
|
|
|
|
*/
|
|
|
|
list_for_each_entry(knotif, &filter->notif->notifications, list) {
|
|
|
|
if (knotif->state == SECCOMP_NOTIFY_REPLIED)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
knotif->state = SECCOMP_NOTIFY_REPLIED;
|
|
|
|
knotif->error = -ENOSYS;
|
|
|
|
knotif->val = 0;
|
|
|
|
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
/*
|
|
|
|
* We do not need to wake up any pending addfd messages, as
|
|
|
|
* the notifier will do that for us, as this just looks
|
|
|
|
* like a standard reply.
|
|
|
|
*/
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
complete(&knotif->ready);
|
|
|
|
}
|
|
|
|
|
2020-09-02 14:09:53 +00:00
|
|
|
seccomp_notify_free(filter);
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
mutex_unlock(&filter->notify_lock);
|
seccomp: don't leak memory when filter install races
In seccomp_set_mode_filter() with TSYNC | NEW_LISTENER, we first initialize
the listener fd, then check to see if we can actually use it later in
seccomp_may_assign_mode(), which can fail if anyone else in our thread
group has installed a filter and caused some divergence. If we can't, we
partially clean up the newly allocated file: we put the fd, put the file,
but don't actually clean up the *memory* that was allocated at
filter->notif. Let's clean that up too.
To accomplish this, let's hoist the actual "detach a notifier from a
filter" code to its own helper out of seccomp_notify_release(), so that in
case anyone adds stuff to init_listener(), they only have to add the
cleanup code in one spot. This does a bit of extra locking and such on the
failure path when the filter is not attached, but it's a slow failure path
anyway.
Fixes: 51891498f2da ("seccomp: allow TSYNC and USER_NOTIF together")
Reported-by: syzbot+3ad9614a12f80994c32e@syzkaller.appspotmail.com
Signed-off-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200902014017.934315-1-tycho@tycho.pizza
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-09-02 01:40:16 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int seccomp_notify_release(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
struct seccomp_filter *filter = file->private_data;
|
|
|
|
|
|
|
|
seccomp_notify_detach(filter);
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
__put_seccomp_filter(filter);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2020-06-01 11:25:32 +00:00
|
|
|
/* must be called with notif_lock held */
|
|
|
|
static inline struct seccomp_knotif *
|
|
|
|
find_notification(struct seccomp_filter *filter, u64 id)
|
|
|
|
{
|
|
|
|
struct seccomp_knotif *cur;
|
|
|
|
|
|
|
|
lockdep_assert_held(&filter->notify_lock);
|
|
|
|
|
|
|
|
list_for_each_entry(cur, &filter->notif->notifications, list) {
|
|
|
|
if (cur->id == id)
|
|
|
|
return cur;
|
|
|
|
}
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
static long seccomp_notify_recv(struct seccomp_filter *filter,
|
|
|
|
void __user *buf)
|
|
|
|
{
|
|
|
|
struct seccomp_knotif *knotif = NULL, *cur;
|
|
|
|
struct seccomp_notif unotif;
|
|
|
|
ssize_t ret;
|
|
|
|
|
2019-12-29 06:24:50 +00:00
|
|
|
/* Verify that we're not given garbage to keep struct extensible. */
|
|
|
|
ret = check_zeroed_user(buf, sizeof(unotif));
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
if (!ret)
|
|
|
|
return -EINVAL;
|
|
|
|
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
memset(&unotif, 0, sizeof(unotif));
|
|
|
|
|
|
|
|
ret = down_interruptible(&filter->notif->request);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
mutex_lock(&filter->notify_lock);
|
|
|
|
list_for_each_entry(cur, &filter->notif->notifications, list) {
|
|
|
|
if (cur->state == SECCOMP_NOTIFY_INIT) {
|
|
|
|
knotif = cur;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If we didn't find a notification, it could be that the task was
|
|
|
|
* interrupted by a fatal signal between the time we were woken and
|
|
|
|
* when we were able to acquire the rw lock.
|
|
|
|
*/
|
|
|
|
if (!knotif) {
|
|
|
|
ret = -ENOENT;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
unotif.id = knotif->id;
|
|
|
|
unotif.pid = task_pid_vnr(knotif->task);
|
|
|
|
unotif.data = *(knotif->data);
|
|
|
|
|
|
|
|
knotif->state = SECCOMP_NOTIFY_SENT;
|
2020-06-01 18:50:07 +00:00
|
|
|
wake_up_poll(&filter->wqh, EPOLLOUT | EPOLLWRNORM);
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
ret = 0;
|
|
|
|
out:
|
|
|
|
mutex_unlock(&filter->notify_lock);
|
|
|
|
|
|
|
|
if (ret == 0 && copy_to_user(buf, &unotif, sizeof(unotif))) {
|
|
|
|
ret = -EFAULT;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Userspace screwed up. To make sure that we keep this
|
|
|
|
* notification alive, let's reset it back to INIT. It
|
|
|
|
* may have died when we released the lock, so we need to make
|
|
|
|
* sure it's still around.
|
|
|
|
*/
|
|
|
|
mutex_lock(&filter->notify_lock);
|
2020-06-01 11:25:32 +00:00
|
|
|
knotif = find_notification(filter, unotif.id);
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
if (knotif) {
|
|
|
|
knotif->state = SECCOMP_NOTIFY_INIT;
|
|
|
|
up(&filter->notif->request);
|
|
|
|
}
|
|
|
|
mutex_unlock(&filter->notify_lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static long seccomp_notify_send(struct seccomp_filter *filter,
|
|
|
|
void __user *buf)
|
|
|
|
{
|
|
|
|
struct seccomp_notif_resp resp = {};
|
2020-06-01 11:25:32 +00:00
|
|
|
struct seccomp_knotif *knotif;
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
long ret;
|
|
|
|
|
|
|
|
if (copy_from_user(&resp, buf, sizeof(resp)))
|
|
|
|
return -EFAULT;
|
|
|
|
|
2019-09-20 08:30:05 +00:00
|
|
|
if (resp.flags & ~SECCOMP_USER_NOTIF_FLAG_CONTINUE)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if ((resp.flags & SECCOMP_USER_NOTIF_FLAG_CONTINUE) &&
|
|
|
|
(resp.error || resp.val))
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
ret = mutex_lock_interruptible(&filter->notify_lock);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
2020-06-01 11:25:32 +00:00
|
|
|
knotif = find_notification(filter, resp.id);
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
if (!knotif) {
|
|
|
|
ret = -ENOENT;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Allow exactly one reply. */
|
|
|
|
if (knotif->state != SECCOMP_NOTIFY_SENT) {
|
|
|
|
ret = -EINPROGRESS;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = 0;
|
|
|
|
knotif->state = SECCOMP_NOTIFY_REPLIED;
|
|
|
|
knotif->error = resp.error;
|
|
|
|
knotif->val = resp.val;
|
2019-09-20 08:30:05 +00:00
|
|
|
knotif->flags = resp.flags;
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
complete(&knotif->ready);
|
|
|
|
out:
|
|
|
|
mutex_unlock(&filter->notify_lock);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static long seccomp_notify_id_valid(struct seccomp_filter *filter,
|
|
|
|
void __user *buf)
|
|
|
|
{
|
2020-06-01 11:25:32 +00:00
|
|
|
struct seccomp_knotif *knotif;
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
u64 id;
|
|
|
|
long ret;
|
|
|
|
|
|
|
|
if (copy_from_user(&id, buf, sizeof(id)))
|
|
|
|
return -EFAULT;
|
|
|
|
|
|
|
|
ret = mutex_lock_interruptible(&filter->notify_lock);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
2020-06-01 11:25:32 +00:00
|
|
|
knotif = find_notification(filter, id);
|
|
|
|
if (knotif && knotif->state == SECCOMP_NOTIFY_SENT)
|
|
|
|
ret = 0;
|
|
|
|
else
|
|
|
|
ret = -ENOENT;
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
|
|
|
|
mutex_unlock(&filter->notify_lock);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
static long seccomp_notify_addfd(struct seccomp_filter *filter,
|
|
|
|
struct seccomp_notif_addfd __user *uaddfd,
|
|
|
|
unsigned int size)
|
|
|
|
{
|
|
|
|
struct seccomp_notif_addfd addfd;
|
|
|
|
struct seccomp_knotif *knotif;
|
|
|
|
struct seccomp_kaddfd kaddfd;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
BUILD_BUG_ON(sizeof(addfd) < SECCOMP_NOTIFY_ADDFD_SIZE_VER0);
|
|
|
|
BUILD_BUG_ON(sizeof(addfd) != SECCOMP_NOTIFY_ADDFD_SIZE_LATEST);
|
|
|
|
|
|
|
|
if (size < SECCOMP_NOTIFY_ADDFD_SIZE_VER0 || size >= PAGE_SIZE)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
ret = copy_struct_from_user(&addfd, sizeof(addfd), uaddfd, size);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
if (addfd.newfd_flags & ~O_CLOEXEC)
|
|
|
|
return -EINVAL;
|
|
|
|
|
seccomp: Support atomic "addfd + send reply"
Alban Crequy reported a race condition userspace faces when we want to
add some fds and make the syscall return them[1] using seccomp notify.
The problem is that currently two different ioctl() calls are needed by
the process handling the syscalls (agent) for another userspace process
(target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and
SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible
for the agent to do the first ioctl to add a file descriptor but the
target is interrupted (EINTR) before the agent does the second ioctl()
call.
This patch adds a flag to the ADDFD ioctl() so it adds the fd and
returns that value atomically to the target program, as suggested by
Kees Cook[2]. This is done by simply allowing
seccomp_do_user_notification() to add the fd and return it in this case.
Therefore, in this case the target wakes up from the wait in
seccomp_do_user_notification() either to interrupt the syscall or to add
the fd and return it.
This "allocate an fd and return" functionality is useful for syscalls
that return a file descriptor only, like connect(2). Other syscalls that
return a file descriptor but not as return value (or return more than
one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not
work with this flag.
This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and
SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's
return value, nor error can be set by the user. Upon successful invocation
of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND
flag, the notifying process's errno will be 0, and the return value will
be the file descriptor number that was installed.
[1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/
Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
|
|
|
if (addfd.flags & ~(SECCOMP_ADDFD_FLAG_SETFD | SECCOMP_ADDFD_FLAG_SEND))
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (addfd.newfd && !(addfd.flags & SECCOMP_ADDFD_FLAG_SETFD))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
kaddfd.file = fget(addfd.srcfd);
|
|
|
|
if (!kaddfd.file)
|
|
|
|
return -EBADF;
|
|
|
|
|
seccomp: Support atomic "addfd + send reply"
Alban Crequy reported a race condition userspace faces when we want to
add some fds and make the syscall return them[1] using seccomp notify.
The problem is that currently two different ioctl() calls are needed by
the process handling the syscalls (agent) for another userspace process
(target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and
SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible
for the agent to do the first ioctl to add a file descriptor but the
target is interrupted (EINTR) before the agent does the second ioctl()
call.
This patch adds a flag to the ADDFD ioctl() so it adds the fd and
returns that value atomically to the target program, as suggested by
Kees Cook[2]. This is done by simply allowing
seccomp_do_user_notification() to add the fd and return it in this case.
Therefore, in this case the target wakes up from the wait in
seccomp_do_user_notification() either to interrupt the syscall or to add
the fd and return it.
This "allocate an fd and return" functionality is useful for syscalls
that return a file descriptor only, like connect(2). Other syscalls that
return a file descriptor but not as return value (or return more than
one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not
work with this flag.
This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and
SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's
return value, nor error can be set by the user. Upon successful invocation
of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND
flag, the notifying process's errno will be 0, and the return value will
be the file descriptor number that was installed.
[1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/
Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
|
|
|
kaddfd.ioctl_flags = addfd.flags;
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
kaddfd.flags = addfd.newfd_flags;
|
2021-03-25 08:22:09 +00:00
|
|
|
kaddfd.setfd = addfd.flags & SECCOMP_ADDFD_FLAG_SETFD;
|
|
|
|
kaddfd.fd = addfd.newfd;
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
init_completion(&kaddfd.completion);
|
|
|
|
|
|
|
|
ret = mutex_lock_interruptible(&filter->notify_lock);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
knotif = find_notification(filter, addfd.id);
|
|
|
|
if (!knotif) {
|
|
|
|
ret = -ENOENT;
|
|
|
|
goto out_unlock;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We do not want to allow for FD injection to occur before the
|
|
|
|
* notification has been picked up by a userspace handler, or after
|
|
|
|
* the notification has been replied to.
|
|
|
|
*/
|
|
|
|
if (knotif->state != SECCOMP_NOTIFY_SENT) {
|
|
|
|
ret = -EINPROGRESS;
|
|
|
|
goto out_unlock;
|
|
|
|
}
|
|
|
|
|
seccomp: Support atomic "addfd + send reply"
Alban Crequy reported a race condition userspace faces when we want to
add some fds and make the syscall return them[1] using seccomp notify.
The problem is that currently two different ioctl() calls are needed by
the process handling the syscalls (agent) for another userspace process
(target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and
SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible
for the agent to do the first ioctl to add a file descriptor but the
target is interrupted (EINTR) before the agent does the second ioctl()
call.
This patch adds a flag to the ADDFD ioctl() so it adds the fd and
returns that value atomically to the target program, as suggested by
Kees Cook[2]. This is done by simply allowing
seccomp_do_user_notification() to add the fd and return it in this case.
Therefore, in this case the target wakes up from the wait in
seccomp_do_user_notification() either to interrupt the syscall or to add
the fd and return it.
This "allocate an fd and return" functionality is useful for syscalls
that return a file descriptor only, like connect(2). Other syscalls that
return a file descriptor but not as return value (or return more than
one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not
work with this flag.
This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and
SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's
return value, nor error can be set by the user. Upon successful invocation
of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND
flag, the notifying process's errno will be 0, and the return value will
be the file descriptor number that was installed.
[1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/
Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
|
|
|
if (addfd.flags & SECCOMP_ADDFD_FLAG_SEND) {
|
|
|
|
/*
|
|
|
|
* Disallow queuing an atomic addfd + send reply while there are
|
|
|
|
* some addfd requests still to process.
|
|
|
|
*
|
|
|
|
* There is no clear reason to support it and allows us to keep
|
|
|
|
* the loop on the other side straight-forward.
|
|
|
|
*/
|
|
|
|
if (!list_empty(&knotif->addfd)) {
|
|
|
|
ret = -EBUSY;
|
|
|
|
goto out_unlock;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Allow exactly only one reply */
|
|
|
|
knotif->state = SECCOMP_NOTIFY_REPLIED;
|
|
|
|
}
|
|
|
|
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
list_add(&kaddfd.list, &knotif->addfd);
|
|
|
|
complete(&knotif->ready);
|
|
|
|
mutex_unlock(&filter->notify_lock);
|
|
|
|
|
|
|
|
/* Now we wait for it to be processed or be interrupted */
|
|
|
|
ret = wait_for_completion_interruptible(&kaddfd.completion);
|
|
|
|
if (ret == 0) {
|
|
|
|
/*
|
|
|
|
* We had a successful completion. The other side has already
|
|
|
|
* removed us from the addfd queue, and
|
|
|
|
* wait_for_completion_interruptible has a memory barrier upon
|
|
|
|
* success that lets us read this value directly without
|
|
|
|
* locking.
|
|
|
|
*/
|
|
|
|
ret = kaddfd.ret;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_lock(&filter->notify_lock);
|
|
|
|
/*
|
|
|
|
* Even though we were woken up by a signal and not a successful
|
|
|
|
* completion, a completion may have happened in the mean time.
|
|
|
|
*
|
|
|
|
* We need to check again if the addfd request has been handled,
|
|
|
|
* and if not, we will remove it from the queue.
|
|
|
|
*/
|
|
|
|
if (list_empty(&kaddfd.list))
|
|
|
|
ret = kaddfd.ret;
|
|
|
|
else
|
|
|
|
list_del(&kaddfd.list);
|
|
|
|
|
|
|
|
out_unlock:
|
|
|
|
mutex_unlock(&filter->notify_lock);
|
|
|
|
out:
|
|
|
|
fput(kaddfd.file);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
static long seccomp_notify_ioctl(struct file *file, unsigned int cmd,
|
|
|
|
unsigned long arg)
|
|
|
|
{
|
|
|
|
struct seccomp_filter *filter = file->private_data;
|
|
|
|
void __user *buf = (void __user *)arg;
|
|
|
|
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
/* Fixed-size ioctls */
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
switch (cmd) {
|
|
|
|
case SECCOMP_IOCTL_NOTIF_RECV:
|
|
|
|
return seccomp_notify_recv(filter, buf);
|
|
|
|
case SECCOMP_IOCTL_NOTIF_SEND:
|
|
|
|
return seccomp_notify_send(filter, buf);
|
2020-06-15 22:42:46 +00:00
|
|
|
case SECCOMP_IOCTL_NOTIF_ID_VALID_WRONG_DIR:
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
case SECCOMP_IOCTL_NOTIF_ID_VALID:
|
|
|
|
return seccomp_notify_id_valid(filter, buf);
|
seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Extensible Argument ioctls */
|
|
|
|
#define EA_IOCTL(cmd) ((cmd) & ~(IOC_INOUT | IOCSIZE_MASK))
|
|
|
|
switch (EA_IOCTL(cmd)) {
|
|
|
|
case EA_IOCTL(SECCOMP_IOCTL_NOTIF_ADDFD):
|
|
|
|
return seccomp_notify_addfd(filter, buf, _IOC_SIZE(cmd));
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static __poll_t seccomp_notify_poll(struct file *file,
|
|
|
|
struct poll_table_struct *poll_tab)
|
|
|
|
{
|
|
|
|
struct seccomp_filter *filter = file->private_data;
|
|
|
|
__poll_t ret = 0;
|
|
|
|
struct seccomp_knotif *cur;
|
|
|
|
|
2020-06-01 18:50:07 +00:00
|
|
|
poll_wait(file, &filter->wqh, poll_tab);
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
|
2018-12-13 02:46:54 +00:00
|
|
|
if (mutex_lock_interruptible(&filter->notify_lock) < 0)
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
return EPOLLERR;
|
|
|
|
|
|
|
|
list_for_each_entry(cur, &filter->notif->notifications, list) {
|
|
|
|
if (cur->state == SECCOMP_NOTIFY_INIT)
|
|
|
|
ret |= EPOLLIN | EPOLLRDNORM;
|
|
|
|
if (cur->state == SECCOMP_NOTIFY_SENT)
|
|
|
|
ret |= EPOLLOUT | EPOLLWRNORM;
|
|
|
|
if ((ret & EPOLLIN) && (ret & EPOLLOUT))
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_unlock(&filter->notify_lock);
|
|
|
|
|
2020-05-31 11:50:30 +00:00
|
|
|
if (refcount_read(&filter->users) == 0)
|
|
|
|
ret |= EPOLLHUP;
|
|
|
|
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations seccomp_notify_ops = {
|
|
|
|
.poll = seccomp_notify_poll,
|
|
|
|
.release = seccomp_notify_release,
|
|
|
|
.unlocked_ioctl = seccomp_notify_ioctl,
|
2020-03-10 12:33:32 +00:00
|
|
|
.compat_ioctl = seccomp_notify_ioctl,
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct file *init_listener(struct seccomp_filter *filter)
|
|
|
|
{
|
2020-10-05 01:44:01 +00:00
|
|
|
struct file *ret;
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
|
|
|
|
ret = ERR_PTR(-ENOMEM);
|
|
|
|
filter->notif = kzalloc(sizeof(*(filter->notif)), GFP_KERNEL);
|
|
|
|
if (!filter->notif)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
sema_init(&filter->notif->request, 0);
|
|
|
|
filter->notif->next_id = get_random_u64();
|
|
|
|
INIT_LIST_HEAD(&filter->notif->notifications);
|
|
|
|
|
|
|
|
ret = anon_inode_getfile("seccomp notify", &seccomp_notify_ops,
|
|
|
|
filter, O_RDWR);
|
|
|
|
if (IS_ERR(ret))
|
|
|
|
goto out_notif;
|
|
|
|
|
|
|
|
/* The file has a reference to it now */
|
|
|
|
__get_seccomp_filter(filter);
|
|
|
|
|
|
|
|
out_notif:
|
|
|
|
if (IS_ERR(ret))
|
2020-09-02 14:09:53 +00:00
|
|
|
seccomp_notify_free(filter);
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
out:
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2020-10-05 01:44:01 +00:00
|
|
|
/*
|
|
|
|
* Does @new_child have a listener while an ancestor also has a listener?
|
|
|
|
* If so, we'll want to reject this filter.
|
|
|
|
* This only has to be tested for the current process, even in the TSYNC case,
|
|
|
|
* because TSYNC installs @child with the same parent on all threads.
|
|
|
|
* Note that @new_child is not hooked up to its parent at this point yet, so
|
|
|
|
* we use current->seccomp.filter.
|
|
|
|
*/
|
|
|
|
static bool has_duplicate_listener(struct seccomp_filter *new_child)
|
|
|
|
{
|
|
|
|
struct seccomp_filter *cur;
|
|
|
|
|
|
|
|
/* must be protected against concurrent TSYNC */
|
|
|
|
lockdep_assert_held(¤t->sighand->siglock);
|
|
|
|
|
|
|
|
if (!new_child->notif)
|
|
|
|
return false;
|
|
|
|
for (cur = current->seccomp.filter; cur; cur = cur->prev) {
|
|
|
|
if (cur->notif)
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2014-06-25 22:55:25 +00:00
|
|
|
/**
|
|
|
|
* seccomp_set_mode_filter: internal function for setting seccomp filter
|
2014-06-25 23:08:24 +00:00
|
|
|
* @flags: flags to change filter behavior
|
2014-06-25 22:55:25 +00:00
|
|
|
* @filter: struct sock_fprog containing filter
|
|
|
|
*
|
|
|
|
* This function may be called repeatedly to install additional filters.
|
|
|
|
* Every filter successfully installed will be evaluated (in reverse order)
|
|
|
|
* for each system call the task makes.
|
|
|
|
*
|
|
|
|
* Once current->seccomp.mode is non-zero, it may not be changed.
|
|
|
|
*
|
|
|
|
* Returns 0 on success or -EINVAL on failure.
|
|
|
|
*/
|
2014-06-25 23:08:24 +00:00
|
|
|
static long seccomp_set_mode_filter(unsigned int flags,
|
|
|
|
const char __user *filter)
|
2014-06-25 22:55:25 +00:00
|
|
|
{
|
|
|
|
const unsigned long seccomp_mode = SECCOMP_MODE_FILTER;
|
2014-06-27 22:16:33 +00:00
|
|
|
struct seccomp_filter *prepared = NULL;
|
2014-06-25 22:55:25 +00:00
|
|
|
long ret = -EINVAL;
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
int listener = -1;
|
|
|
|
struct file *listener_f = NULL;
|
2014-06-25 22:55:25 +00:00
|
|
|
|
2014-06-25 23:08:24 +00:00
|
|
|
/* Validate flags. */
|
2014-06-05 07:23:17 +00:00
|
|
|
if (flags & ~SECCOMP_FILTER_FLAG_MASK)
|
2014-06-27 22:18:48 +00:00
|
|
|
return -EINVAL;
|
2014-06-25 23:08:24 +00:00
|
|
|
|
seccomp: Make NEW_LISTENER and TSYNC flags exclusive
As the comment notes, the return codes for TSYNC and NEW_LISTENER
conflict, because they both return positive values, one in the case of
success and one in the case of error. So, let's disallow both of these
flags together.
While this is technically a userspace break, all the users I know
of are still waiting on me to land this feature in libseccomp, so I
think it'll be safe. Also, at present my use case doesn't require
TSYNC at all, so this isn't a big deal to disallow. If someone
wanted to support this, a path forward would be to add a new flag like
TSYNC_AND_LISTENER_YES_I_UNDERSTAND_THAT_TSYNC_WILL_JUST_RETURN_EAGAIN,
but the use cases are so different I don't see it really happening.
Finally, it's worth noting that this does actually fix a UAF issue: at the
end of seccomp_set_mode_filter(), we have:
if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) {
if (ret < 0) {
listener_f->private_data = NULL;
fput(listener_f);
put_unused_fd(listener);
} else {
fd_install(listener, listener_f);
ret = listener;
}
}
out_free:
seccomp_filter_free(prepared);
But if ret > 0 because TSYNC raced, we'll install the listener fd and then
free the filter out from underneath it, causing a UAF when the task closes
it or dies. This patch also switches the condition to be simply if (ret),
so that if someone does add the flag mentioned above, they won't have to
remember to fix this too.
Reported-by: syzbot+b562969adb2e04af3442@syzkaller.appspotmail.com
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
CC: stable@vger.kernel.org # v5.0+
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
2019-03-06 20:14:13 +00:00
|
|
|
/*
|
|
|
|
* In the successful case, NEW_LISTENER returns the new listener fd.
|
|
|
|
* But in the failure case, TSYNC returns the thread that died. If you
|
|
|
|
* combine these two flags, there's no way to tell whether something
|
seccomp: allow TSYNC and USER_NOTIF together
The restriction introduced in 7a0df7fbc145 ("seccomp: Make NEW_LISTENER and
TSYNC flags exclusive") is mostly artificial: there is enough information
in a seccomp user notification to tell which thread triggered a
notification. The reason it was introduced is because TSYNC makes the
syscall return a thread-id on failure, and NEW_LISTENER returns an fd, and
there's no way to distinguish between these two cases (well, I suppose the
caller could check all fds it has, then do the syscall, and if the return
value was an fd that already existed, then it must be a thread id, but
bleh).
Matthew would like to use these two flags together in the Chrome sandbox
which wants to use TSYNC for video drivers and NEW_LISTENER to proxy
syscalls.
So, let's fix this ugliness by adding another flag, TSYNC_ESRCH, which
tells the kernel to just return -ESRCH on a TSYNC error. This way,
NEW_LISTENER (and any subsequent seccomp() commands that want to return
positive values) don't conflict with each other.
Suggested-by: Matthew Denton <mpdenton@google.com>
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20200304180517.23867-1-tycho@tycho.ws
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-04 18:05:17 +00:00
|
|
|
* succeeded or failed. So, let's disallow this combination if the user
|
|
|
|
* has not explicitly requested no errors from TSYNC.
|
seccomp: Make NEW_LISTENER and TSYNC flags exclusive
As the comment notes, the return codes for TSYNC and NEW_LISTENER
conflict, because they both return positive values, one in the case of
success and one in the case of error. So, let's disallow both of these
flags together.
While this is technically a userspace break, all the users I know
of are still waiting on me to land this feature in libseccomp, so I
think it'll be safe. Also, at present my use case doesn't require
TSYNC at all, so this isn't a big deal to disallow. If someone
wanted to support this, a path forward would be to add a new flag like
TSYNC_AND_LISTENER_YES_I_UNDERSTAND_THAT_TSYNC_WILL_JUST_RETURN_EAGAIN,
but the use cases are so different I don't see it really happening.
Finally, it's worth noting that this does actually fix a UAF issue: at the
end of seccomp_set_mode_filter(), we have:
if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) {
if (ret < 0) {
listener_f->private_data = NULL;
fput(listener_f);
put_unused_fd(listener);
} else {
fd_install(listener, listener_f);
ret = listener;
}
}
out_free:
seccomp_filter_free(prepared);
But if ret > 0 because TSYNC raced, we'll install the listener fd and then
free the filter out from underneath it, causing a UAF when the task closes
it or dies. This patch also switches the condition to be simply if (ret),
so that if someone does add the flag mentioned above, they won't have to
remember to fix this too.
Reported-by: syzbot+b562969adb2e04af3442@syzkaller.appspotmail.com
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
CC: stable@vger.kernel.org # v5.0+
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
2019-03-06 20:14:13 +00:00
|
|
|
*/
|
|
|
|
if ((flags & SECCOMP_FILTER_FLAG_TSYNC) &&
|
seccomp: allow TSYNC and USER_NOTIF together
The restriction introduced in 7a0df7fbc145 ("seccomp: Make NEW_LISTENER and
TSYNC flags exclusive") is mostly artificial: there is enough information
in a seccomp user notification to tell which thread triggered a
notification. The reason it was introduced is because TSYNC makes the
syscall return a thread-id on failure, and NEW_LISTENER returns an fd, and
there's no way to distinguish between these two cases (well, I suppose the
caller could check all fds it has, then do the syscall, and if the return
value was an fd that already existed, then it must be a thread id, but
bleh).
Matthew would like to use these two flags together in the Chrome sandbox
which wants to use TSYNC for video drivers and NEW_LISTENER to proxy
syscalls.
So, let's fix this ugliness by adding another flag, TSYNC_ESRCH, which
tells the kernel to just return -ESRCH on a TSYNC error. This way,
NEW_LISTENER (and any subsequent seccomp() commands that want to return
positive values) don't conflict with each other.
Suggested-by: Matthew Denton <mpdenton@google.com>
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20200304180517.23867-1-tycho@tycho.ws
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-04 18:05:17 +00:00
|
|
|
(flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) &&
|
|
|
|
((flags & SECCOMP_FILTER_FLAG_TSYNC_ESRCH) == 0))
|
seccomp: Make NEW_LISTENER and TSYNC flags exclusive
As the comment notes, the return codes for TSYNC and NEW_LISTENER
conflict, because they both return positive values, one in the case of
success and one in the case of error. So, let's disallow both of these
flags together.
While this is technically a userspace break, all the users I know
of are still waiting on me to land this feature in libseccomp, so I
think it'll be safe. Also, at present my use case doesn't require
TSYNC at all, so this isn't a big deal to disallow. If someone
wanted to support this, a path forward would be to add a new flag like
TSYNC_AND_LISTENER_YES_I_UNDERSTAND_THAT_TSYNC_WILL_JUST_RETURN_EAGAIN,
but the use cases are so different I don't see it really happening.
Finally, it's worth noting that this does actually fix a UAF issue: at the
end of seccomp_set_mode_filter(), we have:
if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) {
if (ret < 0) {
listener_f->private_data = NULL;
fput(listener_f);
put_unused_fd(listener);
} else {
fd_install(listener, listener_f);
ret = listener;
}
}
out_free:
seccomp_filter_free(prepared);
But if ret > 0 because TSYNC raced, we'll install the listener fd and then
free the filter out from underneath it, causing a UAF when the task closes
it or dies. This patch also switches the condition to be simply if (ret),
so that if someone does add the flag mentioned above, they won't have to
remember to fix this too.
Reported-by: syzbot+b562969adb2e04af3442@syzkaller.appspotmail.com
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
CC: stable@vger.kernel.org # v5.0+
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
2019-03-06 20:14:13 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
2014-06-27 22:16:33 +00:00
|
|
|
/* Prepare the new filter before holding any locks. */
|
|
|
|
prepared = seccomp_prepare_user_filter(filter);
|
|
|
|
if (IS_ERR(prepared))
|
|
|
|
return PTR_ERR(prepared);
|
|
|
|
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) {
|
|
|
|
listener = get_unused_fd_flags(O_CLOEXEC);
|
|
|
|
if (listener < 0) {
|
|
|
|
ret = listener;
|
|
|
|
goto out_free;
|
|
|
|
}
|
|
|
|
|
|
|
|
listener_f = init_listener(prepared);
|
|
|
|
if (IS_ERR(listener_f)) {
|
|
|
|
put_unused_fd(listener);
|
|
|
|
ret = PTR_ERR(listener_f);
|
|
|
|
goto out_free;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-06-05 07:23:17 +00:00
|
|
|
/*
|
|
|
|
* Make sure we cannot change seccomp or nnp state via TSYNC
|
|
|
|
* while another thread is in the middle of calling exec.
|
|
|
|
*/
|
|
|
|
if (flags & SECCOMP_FILTER_FLAG_TSYNC &&
|
|
|
|
mutex_lock_killable(¤t->signal->cred_guard_mutex))
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
goto out_put_fd;
|
2014-06-05 07:23:17 +00:00
|
|
|
|
2014-06-27 22:18:48 +00:00
|
|
|
spin_lock_irq(¤t->sighand->siglock);
|
|
|
|
|
2014-06-25 22:55:25 +00:00
|
|
|
if (!seccomp_may_assign_mode(seccomp_mode))
|
|
|
|
goto out;
|
|
|
|
|
2020-10-05 01:44:01 +00:00
|
|
|
if (has_duplicate_listener(prepared)) {
|
|
|
|
ret = -EBUSY;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2014-06-27 22:16:33 +00:00
|
|
|
ret = seccomp_attach_filter(flags, prepared);
|
2014-06-25 22:55:25 +00:00
|
|
|
if (ret)
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
goto out;
|
2014-06-27 22:16:33 +00:00
|
|
|
/* Do not free the successfully attached filter. */
|
|
|
|
prepared = NULL;
|
2007-07-16 06:41:32 +00:00
|
|
|
|
2018-05-03 21:56:12 +00:00
|
|
|
seccomp_assign_mode(current, seccomp_mode, flags);
|
seccomp: add system call filtering using BPF
[This patch depends on luto@mit.edu's no_new_privs patch:
https://lkml.org/lkml/2012/1/30/264
The whole series including Andrew's patches can be found here:
https://github.com/redpig/linux/tree/seccomp
Complete diff here:
https://github.com/redpig/linux/compare/1dc65fed...seccomp
]
This patch adds support for seccomp mode 2. Mode 2 introduces the
ability for unprivileged processes to install system call filtering
policy expressed in terms of a Berkeley Packet Filter (BPF) program.
This program will be evaluated in the kernel for each system call
the task makes and computes a result based on data in the format
of struct seccomp_data.
A filter program may be installed by calling:
struct sock_fprog fprog = { ... };
...
prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog);
The return value of the filter program determines if the system call is
allowed to proceed or denied. If the first filter program installed
allows prctl(2) calls, then the above call may be made repeatedly
by a task to further reduce its access to the kernel. All attached
programs must be evaluated before a system call will be allowed to
proceed.
Filter programs will be inherited across fork/clone and execve.
However, if the task attaching the filter is unprivileged
(!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This
ensures that unprivileged tasks cannot attach filters that affect
privileged tasks (e.g., setuid binary).
There are a number of benefits to this approach. A few of which are
as follows:
- BPF has been exposed to userland for a long time
- BPF optimization (and JIT'ing) are well understood
- Userland already knows its ABI: system call numbers and desired
arguments
- No time-of-check-time-of-use vulnerable data accesses are possible.
- system call arguments are loaded on access only to minimize copying
required for system call policy decisions.
Mode 2 support is restricted to architectures that enable
HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on
syscall_get_arguments(). The full desired scope of this feature will
add a few minor additional requirements expressed later in this series.
Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be
the desired additional functionality.
No architectures are enabled in this patch.
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Indan Zupancic <indan@nul.nu>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
v18: - rebase to v3.4-rc2
- s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org)
- allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu)
- add a comment for get_u32 regarding endianness (akpm@)
- fix other typos, style mistakes (akpm@)
- added acked-by
v17: - properly guard seccomp filter needed headers (leann@ubuntu.com)
- tighten return mask to 0x7fff0000
v16: - no change
v15: - add a 4 instr penalty when counting a path to account for seccomp_filter
size (indan@nul.nu)
- drop the max insns to 256KB (indan@nul.nu)
- return ENOMEM if the max insns limit has been hit (indan@nul.nu)
- move IP checks after args (indan@nul.nu)
- drop !user_filter check (indan@nul.nu)
- only allow explicit bpf codes (indan@nul.nu)
- exit_code -> exit_sig
v14: - put/get_seccomp_filter takes struct task_struct
(indan@nul.nu,keescook@chromium.org)
- adds seccomp_chk_filter and drops general bpf_run/chk_filter user
- add seccomp_bpf_load for use by net/core/filter.c
- lower max per-process/per-hierarchy: 1MB
- moved nnp/capability check prior to allocation
(all of the above: indan@nul.nu)
v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc
v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com)
- removed copy_seccomp (keescook@chromium.org,indan@nul.nu)
- reworded the prctl_set_seccomp comment (indan@nul.nu)
v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com)
- style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu)
- do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu)
- pare down Kconfig doc reference.
- extra comment clean up
v10: - seccomp_data has changed again to be more aesthetically pleasing
(hpa@zytor.com)
- calling convention is noted in a new u32 field using syscall_get_arch.
This allows for cross-calling convention tasks to use seccomp filters.
(hpa@zytor.com)
- lots of clean up (thanks, Indan!)
v9: - n/a
v8: - use bpf_chk_filter, bpf_run_filter. update load_fns
- Lots of fixes courtesy of indan@nul.nu:
-- fix up load behavior, compat fixups, and merge alloc code,
-- renamed pc and dropped __packed, use bool compat.
-- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch
dependencies
v7: (massive overhaul thanks to Indan, others)
- added CONFIG_HAVE_ARCH_SECCOMP_FILTER
- merged into seccomp.c
- minimal seccomp_filter.h
- no config option (part of seccomp)
- no new prctl
- doesn't break seccomp on systems without asm/syscall.h
(works but arg access always fails)
- dropped seccomp_init_task, extra free functions, ...
- dropped the no-asm/syscall.h code paths
- merges with network sk_run_filter and sk_chk_filter
v6: - fix memory leak on attach compat check failure
- require no_new_privs || CAP_SYS_ADMIN prior to filter
installation. (luto@mit.edu)
- s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com)
- cleaned up Kconfig (amwang@redhat.com)
- on block, note if the call was compat (so the # means something)
v5: - uses syscall_get_arguments
(indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org)
- uses union-based arg storage with hi/lo struct to
handle endianness. Compromises between the two alternate
proposals to minimize extra arg shuffling and account for
endianness assuming userspace uses offsetof().
(mcgrathr@chromium.org, indan@nul.nu)
- update Kconfig description
- add include/seccomp_filter.h and add its installation
- (naive) on-demand syscall argument loading
- drop seccomp_t (eparis@redhat.com)
v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS
- now uses current->no_new_privs
(luto@mit.edu,torvalds@linux-foundation.com)
- assign names to seccomp modes (rdunlap@xenotime.net)
- fix style issues (rdunlap@xenotime.net)
- reworded Kconfig entry (rdunlap@xenotime.net)
v3: - macros to inline (oleg@redhat.com)
- init_task behavior fixed (oleg@redhat.com)
- drop creator entry and extra NULL check (oleg@redhat.com)
- alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com)
- adds tentative use of "always_unprivileged" as per
torvalds@linux-foundation.org and luto@mit.edu
v2: - (patch 2 only)
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
|
|
|
out:
|
2014-06-27 22:18:48 +00:00
|
|
|
spin_unlock_irq(¤t->sighand->siglock);
|
2014-06-05 07:23:17 +00:00
|
|
|
if (flags & SECCOMP_FILTER_FLAG_TSYNC)
|
|
|
|
mutex_unlock(¤t->signal->cred_guard_mutex);
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
out_put_fd:
|
|
|
|
if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) {
|
seccomp: Make NEW_LISTENER and TSYNC flags exclusive
As the comment notes, the return codes for TSYNC and NEW_LISTENER
conflict, because they both return positive values, one in the case of
success and one in the case of error. So, let's disallow both of these
flags together.
While this is technically a userspace break, all the users I know
of are still waiting on me to land this feature in libseccomp, so I
think it'll be safe. Also, at present my use case doesn't require
TSYNC at all, so this isn't a big deal to disallow. If someone
wanted to support this, a path forward would be to add a new flag like
TSYNC_AND_LISTENER_YES_I_UNDERSTAND_THAT_TSYNC_WILL_JUST_RETURN_EAGAIN,
but the use cases are so different I don't see it really happening.
Finally, it's worth noting that this does actually fix a UAF issue: at the
end of seccomp_set_mode_filter(), we have:
if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) {
if (ret < 0) {
listener_f->private_data = NULL;
fput(listener_f);
put_unused_fd(listener);
} else {
fd_install(listener, listener_f);
ret = listener;
}
}
out_free:
seccomp_filter_free(prepared);
But if ret > 0 because TSYNC raced, we'll install the listener fd and then
free the filter out from underneath it, causing a UAF when the task closes
it or dies. This patch also switches the condition to be simply if (ret),
so that if someone does add the flag mentioned above, they won't have to
remember to fix this too.
Reported-by: syzbot+b562969adb2e04af3442@syzkaller.appspotmail.com
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
CC: stable@vger.kernel.org # v5.0+
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
2019-03-06 20:14:13 +00:00
|
|
|
if (ret) {
|
2019-01-12 18:24:20 +00:00
|
|
|
listener_f->private_data = NULL;
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
fput(listener_f);
|
|
|
|
put_unused_fd(listener);
|
seccomp: don't leak memory when filter install races
In seccomp_set_mode_filter() with TSYNC | NEW_LISTENER, we first initialize
the listener fd, then check to see if we can actually use it later in
seccomp_may_assign_mode(), which can fail if anyone else in our thread
group has installed a filter and caused some divergence. If we can't, we
partially clean up the newly allocated file: we put the fd, put the file,
but don't actually clean up the *memory* that was allocated at
filter->notif. Let's clean that up too.
To accomplish this, let's hoist the actual "detach a notifier from a
filter" code to its own helper out of seccomp_notify_release(), so that in
case anyone adds stuff to init_listener(), they only have to add the
cleanup code in one spot. This does a bit of extra locking and such on the
failure path when the filter is not attached, but it's a slow failure path
anyway.
Fixes: 51891498f2da ("seccomp: allow TSYNC and USER_NOTIF together")
Reported-by: syzbot+3ad9614a12f80994c32e@syzkaller.appspotmail.com
Signed-off-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200902014017.934315-1-tycho@tycho.pizza
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-09-02 01:40:16 +00:00
|
|
|
seccomp_notify_detach(prepared);
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
} else {
|
|
|
|
fd_install(listener, listener_f);
|
|
|
|
ret = listener;
|
|
|
|
}
|
|
|
|
}
|
2014-06-05 07:23:17 +00:00
|
|
|
out_free:
|
2014-06-27 22:16:33 +00:00
|
|
|
seccomp_filter_free(prepared);
|
2007-07-16 06:41:32 +00:00
|
|
|
return ret;
|
|
|
|
}
|
2014-06-25 22:55:25 +00:00
|
|
|
#else
|
2014-06-25 23:08:24 +00:00
|
|
|
static inline long seccomp_set_mode_filter(unsigned int flags,
|
|
|
|
const char __user *filter)
|
2014-06-25 22:55:25 +00:00
|
|
|
{
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
#endif
|
2014-05-21 22:02:11 +00:00
|
|
|
|
2017-08-11 04:33:53 +00:00
|
|
|
static long seccomp_get_action_avail(const char __user *uaction)
|
|
|
|
{
|
|
|
|
u32 action;
|
|
|
|
|
|
|
|
if (copy_from_user(&action, uaction, sizeof(action)))
|
|
|
|
return -EFAULT;
|
|
|
|
|
|
|
|
switch (action) {
|
seccomp: Implement SECCOMP_RET_KILL_PROCESS action
Right now, SECCOMP_RET_KILL_THREAD (neé SECCOMP_RET_KILL) kills the
current thread. There have been a few requests for this to kill the entire
process (the thread group). This cannot be just changed (discovered when
adding coredump support since coredumping kills the entire process)
because there are userspace programs depending on the thread-kill
behavior.
Instead, implement SECCOMP_RET_KILL_PROCESS, which is 0x80000000, and can
be processed as "-1" by the kernel, below the existing RET_KILL that is
ABI-set to "0". For userspace, SECCOMP_RET_ACTION_FULL is added to expand
the mask to the signed bit. Old userspace using the SECCOMP_RET_ACTION
mask will see SECCOMP_RET_KILL_PROCESS as 0 still, but this would only
be visible when examining the siginfo in a core dump from a RET_KILL_*,
where it will think it was thread-killed instead of process-killed.
Attempts to introduce this behavior via other ways (filter flags,
seccomp struct flags, masked RET_DATA bits) all come with weird
side-effects and baggage. This change preserves the central behavioral
expectations of the seccomp filter engine without putting too great
a burden on changes needed in userspace to use the new action.
The new action is discoverable by userspace through either the new
actions_avail sysctl or through the SECCOMP_GET_ACTION_AVAIL seccomp
operation. If used without checking for availability, old kernels
will treat RET_KILL_PROCESS as RET_KILL_THREAD (since the old mask
will produce RET_KILL_THREAD).
Cc: Paul Moore <paul@paul-moore.com>
Cc: Fabricio Voznika <fvoznika@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 20:12:11 +00:00
|
|
|
case SECCOMP_RET_KILL_PROCESS:
|
2017-08-11 19:53:18 +00:00
|
|
|
case SECCOMP_RET_KILL_THREAD:
|
2017-08-11 04:33:53 +00:00
|
|
|
case SECCOMP_RET_TRAP:
|
|
|
|
case SECCOMP_RET_ERRNO:
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
case SECCOMP_RET_USER_NOTIF:
|
2017-08-11 04:33:53 +00:00
|
|
|
case SECCOMP_RET_TRACE:
|
seccomp: Action to log before allowing
Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing
the syscall. At the implementation level, this action is identical to
the existing SECCOMP_RET_ALLOW action. However, it can be very useful when
initially developing a seccomp filter for an application. The developer
can set the default action to be SECCOMP_RET_LOG, maybe mark any
obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the
application through its paces. A list of syscalls that triggered the
default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and
that list can be used to build the syscall whitelist. Finally, the
developer can change the default action to the desired value.
This provides a more friendly experience than seeing the application get
killed, then updating the filter and rebuilding the app, seeing the
application get killed due to a different syscall, then updating the
filter and rebuilding the app, etc.
The functionality is similar to what's supported by the various LSMs.
SELinux has permissive mode, AppArmor has complain mode, SMACK has
bring-up mode, etc.
SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow
while logging is slightly more restrictive than quietly allowing.
Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of
inspecting the audit log to verify that the syscall was logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if action == RET_LOG && RET_LOG in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:57 +00:00
|
|
|
case SECCOMP_RET_LOG:
|
2017-08-11 04:33:53 +00:00
|
|
|
case SECCOMP_RET_ALLOW:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
static long seccomp_get_notif_sizes(void __user *usizes)
|
|
|
|
{
|
|
|
|
struct seccomp_notif_sizes sizes = {
|
|
|
|
.seccomp_notif = sizeof(struct seccomp_notif),
|
|
|
|
.seccomp_notif_resp = sizeof(struct seccomp_notif_resp),
|
|
|
|
.seccomp_data = sizeof(struct seccomp_data),
|
|
|
|
};
|
|
|
|
|
|
|
|
if (copy_to_user(usizes, &sizes, sizeof(sizes)))
|
|
|
|
return -EFAULT;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-06-25 23:08:24 +00:00
|
|
|
/* Common entry point for both prctl and syscall. */
|
|
|
|
static long do_seccomp(unsigned int op, unsigned int flags,
|
2018-12-09 18:24:12 +00:00
|
|
|
void __user *uargs)
|
2014-06-25 23:08:24 +00:00
|
|
|
{
|
|
|
|
switch (op) {
|
|
|
|
case SECCOMP_SET_MODE_STRICT:
|
|
|
|
if (flags != 0 || uargs != NULL)
|
|
|
|
return -EINVAL;
|
|
|
|
return seccomp_set_mode_strict();
|
|
|
|
case SECCOMP_SET_MODE_FILTER:
|
|
|
|
return seccomp_set_mode_filter(flags, uargs);
|
2017-08-11 04:33:53 +00:00
|
|
|
case SECCOMP_GET_ACTION_AVAIL:
|
|
|
|
if (flags != 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
return seccomp_get_action_avail(uargs);
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
case SECCOMP_GET_NOTIF_SIZES:
|
|
|
|
if (flags != 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
return seccomp_get_notif_sizes(uargs);
|
2014-06-25 23:08:24 +00:00
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
SYSCALL_DEFINE3(seccomp, unsigned int, op, unsigned int, flags,
|
2018-12-09 18:24:12 +00:00
|
|
|
void __user *, uargs)
|
2014-06-25 23:08:24 +00:00
|
|
|
{
|
|
|
|
return do_seccomp(op, flags, uargs);
|
|
|
|
}
|
|
|
|
|
2014-05-21 22:02:11 +00:00
|
|
|
/**
|
|
|
|
* prctl_set_seccomp: configures current->seccomp.mode
|
|
|
|
* @seccomp_mode: requested mode to use
|
|
|
|
* @filter: optional struct sock_fprog for use with SECCOMP_MODE_FILTER
|
|
|
|
*
|
|
|
|
* Returns 0 on success or -EINVAL on failure.
|
|
|
|
*/
|
2018-12-09 18:24:12 +00:00
|
|
|
long prctl_set_seccomp(unsigned long seccomp_mode, void __user *filter)
|
2014-05-21 22:02:11 +00:00
|
|
|
{
|
2014-06-25 23:08:24 +00:00
|
|
|
unsigned int op;
|
2018-12-09 18:24:12 +00:00
|
|
|
void __user *uargs;
|
2014-06-25 23:08:24 +00:00
|
|
|
|
2014-06-25 22:55:25 +00:00
|
|
|
switch (seccomp_mode) {
|
|
|
|
case SECCOMP_MODE_STRICT:
|
2014-06-25 23:08:24 +00:00
|
|
|
op = SECCOMP_SET_MODE_STRICT;
|
|
|
|
/*
|
|
|
|
* Setting strict mode through prctl always ignored filter,
|
|
|
|
* so make sure it is always NULL here to pass the internal
|
|
|
|
* check in do_seccomp().
|
|
|
|
*/
|
|
|
|
uargs = NULL;
|
|
|
|
break;
|
2014-06-25 22:55:25 +00:00
|
|
|
case SECCOMP_MODE_FILTER:
|
2014-06-25 23:08:24 +00:00
|
|
|
op = SECCOMP_SET_MODE_FILTER;
|
|
|
|
uargs = filter;
|
|
|
|
break;
|
2014-06-25 22:55:25 +00:00
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
2014-06-25 23:08:24 +00:00
|
|
|
|
|
|
|
/* prctl interface doesn't have flags, so they are always zero. */
|
|
|
|
return do_seccomp(op, 0, uargs);
|
2014-05-21 22:02:11 +00:00
|
|
|
}
|
2015-10-27 00:23:59 +00:00
|
|
|
|
|
|
|
#if defined(CONFIG_SECCOMP_FILTER) && defined(CONFIG_CHECKPOINT_RESTORE)
|
2017-10-11 15:39:20 +00:00
|
|
|
static struct seccomp_filter *get_nth_filter(struct task_struct *task,
|
|
|
|
unsigned long filter_off)
|
2015-10-27 00:23:59 +00:00
|
|
|
{
|
2017-10-11 15:39:20 +00:00
|
|
|
struct seccomp_filter *orig, *filter;
|
|
|
|
unsigned long count;
|
2015-10-27 00:23:59 +00:00
|
|
|
|
2017-10-11 15:39:20 +00:00
|
|
|
/*
|
|
|
|
* Note: this is only correct because the caller should be the (ptrace)
|
|
|
|
* tracer of the task, otherwise lock_task_sighand is needed.
|
|
|
|
*/
|
2015-10-27 00:23:59 +00:00
|
|
|
spin_lock_irq(&task->sighand->siglock);
|
2017-10-11 15:39:20 +00:00
|
|
|
|
2015-10-27 00:23:59 +00:00
|
|
|
if (task->seccomp.mode != SECCOMP_MODE_FILTER) {
|
2017-10-11 15:39:20 +00:00
|
|
|
spin_unlock_irq(&task->sighand->siglock);
|
|
|
|
return ERR_PTR(-EINVAL);
|
2015-10-27 00:23:59 +00:00
|
|
|
}
|
|
|
|
|
2017-10-11 15:39:20 +00:00
|
|
|
orig = task->seccomp.filter;
|
|
|
|
__get_seccomp_filter(orig);
|
|
|
|
spin_unlock_irq(&task->sighand->siglock);
|
|
|
|
|
|
|
|
count = 0;
|
|
|
|
for (filter = orig; filter; filter = filter->prev)
|
2015-10-27 00:23:59 +00:00
|
|
|
count++;
|
|
|
|
|
|
|
|
if (filter_off >= count) {
|
2017-10-11 15:39:20 +00:00
|
|
|
filter = ERR_PTR(-ENOENT);
|
2015-10-27 00:23:59 +00:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2017-10-11 15:39:20 +00:00
|
|
|
count -= filter_off;
|
|
|
|
for (filter = orig; filter && count > 1; filter = filter->prev)
|
2015-10-27 00:23:59 +00:00
|
|
|
count--;
|
|
|
|
|
|
|
|
if (WARN_ON(count != 1 || !filter)) {
|
2017-10-11 15:39:20 +00:00
|
|
|
filter = ERR_PTR(-ENOENT);
|
2015-10-27 00:23:59 +00:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2017-10-11 15:39:20 +00:00
|
|
|
__get_seccomp_filter(filter);
|
|
|
|
|
|
|
|
out:
|
|
|
|
__put_seccomp_filter(orig);
|
|
|
|
return filter;
|
|
|
|
}
|
|
|
|
|
|
|
|
long seccomp_get_filter(struct task_struct *task, unsigned long filter_off,
|
|
|
|
void __user *data)
|
|
|
|
{
|
|
|
|
struct seccomp_filter *filter;
|
|
|
|
struct sock_fprog_kern *fprog;
|
|
|
|
long ret;
|
|
|
|
|
|
|
|
if (!capable(CAP_SYS_ADMIN) ||
|
|
|
|
current->seccomp.mode != SECCOMP_MODE_DISABLED) {
|
|
|
|
return -EACCES;
|
|
|
|
}
|
|
|
|
|
|
|
|
filter = get_nth_filter(task, filter_off);
|
|
|
|
if (IS_ERR(filter))
|
|
|
|
return PTR_ERR(filter);
|
|
|
|
|
2015-10-27 00:23:59 +00:00
|
|
|
fprog = filter->prog->orig_prog;
|
|
|
|
if (!fprog) {
|
2016-03-24 01:46:33 +00:00
|
|
|
/* This must be a new non-cBPF filter, since we save
|
2015-10-27 00:23:59 +00:00
|
|
|
* every cBPF filter's orig_prog above when
|
|
|
|
* CONFIG_CHECKPOINT_RESTORE is enabled.
|
|
|
|
*/
|
|
|
|
ret = -EMEDIUMTYPE;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = fprog->len;
|
|
|
|
if (!data)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
if (copy_to_user(data, fprog->filter, bpf_classic_proglen(fprog)))
|
|
|
|
ret = -EFAULT;
|
|
|
|
|
|
|
|
out:
|
2017-09-27 15:25:30 +00:00
|
|
|
__put_seccomp_filter(filter);
|
2015-10-27 00:23:59 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2017-10-11 15:39:21 +00:00
|
|
|
long seccomp_get_metadata(struct task_struct *task,
|
|
|
|
unsigned long size, void __user *data)
|
|
|
|
{
|
|
|
|
long ret;
|
|
|
|
struct seccomp_filter *filter;
|
|
|
|
struct seccomp_metadata kmd = {};
|
|
|
|
|
|
|
|
if (!capable(CAP_SYS_ADMIN) ||
|
|
|
|
current->seccomp.mode != SECCOMP_MODE_DISABLED) {
|
|
|
|
return -EACCES;
|
|
|
|
}
|
|
|
|
|
|
|
|
size = min_t(unsigned long, size, sizeof(kmd));
|
|
|
|
|
2018-02-21 02:47:46 +00:00
|
|
|
if (size < sizeof(kmd.filter_off))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (copy_from_user(&kmd.filter_off, data, sizeof(kmd.filter_off)))
|
2017-10-11 15:39:21 +00:00
|
|
|
return -EFAULT;
|
|
|
|
|
|
|
|
filter = get_nth_filter(task, kmd.filter_off);
|
|
|
|
if (IS_ERR(filter))
|
|
|
|
return PTR_ERR(filter);
|
|
|
|
|
|
|
|
if (filter->log)
|
|
|
|
kmd.flags |= SECCOMP_FILTER_FLAG_LOG;
|
|
|
|
|
|
|
|
ret = size;
|
|
|
|
if (copy_to_user(data, &kmd, size))
|
|
|
|
ret = -EFAULT;
|
|
|
|
|
|
|
|
__put_seccomp_filter(filter);
|
2015-10-27 00:23:59 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
#endif
|
2017-08-11 04:33:52 +00:00
|
|
|
|
|
|
|
#ifdef CONFIG_SYSCTL
|
|
|
|
|
|
|
|
/* Human readable action names for friendly sysctl interaction */
|
seccomp: Implement SECCOMP_RET_KILL_PROCESS action
Right now, SECCOMP_RET_KILL_THREAD (neé SECCOMP_RET_KILL) kills the
current thread. There have been a few requests for this to kill the entire
process (the thread group). This cannot be just changed (discovered when
adding coredump support since coredumping kills the entire process)
because there are userspace programs depending on the thread-kill
behavior.
Instead, implement SECCOMP_RET_KILL_PROCESS, which is 0x80000000, and can
be processed as "-1" by the kernel, below the existing RET_KILL that is
ABI-set to "0". For userspace, SECCOMP_RET_ACTION_FULL is added to expand
the mask to the signed bit. Old userspace using the SECCOMP_RET_ACTION
mask will see SECCOMP_RET_KILL_PROCESS as 0 still, but this would only
be visible when examining the siginfo in a core dump from a RET_KILL_*,
where it will think it was thread-killed instead of process-killed.
Attempts to introduce this behavior via other ways (filter flags,
seccomp struct flags, masked RET_DATA bits) all come with weird
side-effects and baggage. This change preserves the central behavioral
expectations of the seccomp filter engine without putting too great
a burden on changes needed in userspace to use the new action.
The new action is discoverable by userspace through either the new
actions_avail sysctl or through the SECCOMP_GET_ACTION_AVAIL seccomp
operation. If used without checking for availability, old kernels
will treat RET_KILL_PROCESS as RET_KILL_THREAD (since the old mask
will produce RET_KILL_THREAD).
Cc: Paul Moore <paul@paul-moore.com>
Cc: Fabricio Voznika <fvoznika@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 20:12:11 +00:00
|
|
|
#define SECCOMP_RET_KILL_PROCESS_NAME "kill_process"
|
2017-08-11 19:53:18 +00:00
|
|
|
#define SECCOMP_RET_KILL_THREAD_NAME "kill_thread"
|
2017-08-11 04:33:52 +00:00
|
|
|
#define SECCOMP_RET_TRAP_NAME "trap"
|
|
|
|
#define SECCOMP_RET_ERRNO_NAME "errno"
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
#define SECCOMP_RET_USER_NOTIF_NAME "user_notif"
|
2017-08-11 04:33:52 +00:00
|
|
|
#define SECCOMP_RET_TRACE_NAME "trace"
|
seccomp: Action to log before allowing
Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing
the syscall. At the implementation level, this action is identical to
the existing SECCOMP_RET_ALLOW action. However, it can be very useful when
initially developing a seccomp filter for an application. The developer
can set the default action to be SECCOMP_RET_LOG, maybe mark any
obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the
application through its paces. A list of syscalls that triggered the
default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and
that list can be used to build the syscall whitelist. Finally, the
developer can change the default action to the desired value.
This provides a more friendly experience than seeing the application get
killed, then updating the filter and rebuilding the app, seeing the
application get killed due to a different syscall, then updating the
filter and rebuilding the app, etc.
The functionality is similar to what's supported by the various LSMs.
SELinux has permissive mode, AppArmor has complain mode, SMACK has
bring-up mode, etc.
SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow
while logging is slightly more restrictive than quietly allowing.
Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of
inspecting the audit log to verify that the syscall was logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if action == RET_LOG && RET_LOG in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:57 +00:00
|
|
|
#define SECCOMP_RET_LOG_NAME "log"
|
2017-08-11 04:33:52 +00:00
|
|
|
#define SECCOMP_RET_ALLOW_NAME "allow"
|
|
|
|
|
2017-08-11 19:53:18 +00:00
|
|
|
static const char seccomp_actions_avail[] =
|
seccomp: Implement SECCOMP_RET_KILL_PROCESS action
Right now, SECCOMP_RET_KILL_THREAD (neé SECCOMP_RET_KILL) kills the
current thread. There have been a few requests for this to kill the entire
process (the thread group). This cannot be just changed (discovered when
adding coredump support since coredumping kills the entire process)
because there are userspace programs depending on the thread-kill
behavior.
Instead, implement SECCOMP_RET_KILL_PROCESS, which is 0x80000000, and can
be processed as "-1" by the kernel, below the existing RET_KILL that is
ABI-set to "0". For userspace, SECCOMP_RET_ACTION_FULL is added to expand
the mask to the signed bit. Old userspace using the SECCOMP_RET_ACTION
mask will see SECCOMP_RET_KILL_PROCESS as 0 still, but this would only
be visible when examining the siginfo in a core dump from a RET_KILL_*,
where it will think it was thread-killed instead of process-killed.
Attempts to introduce this behavior via other ways (filter flags,
seccomp struct flags, masked RET_DATA bits) all come with weird
side-effects and baggage. This change preserves the central behavioral
expectations of the seccomp filter engine without putting too great
a burden on changes needed in userspace to use the new action.
The new action is discoverable by userspace through either the new
actions_avail sysctl or through the SECCOMP_GET_ACTION_AVAIL seccomp
operation. If used without checking for availability, old kernels
will treat RET_KILL_PROCESS as RET_KILL_THREAD (since the old mask
will produce RET_KILL_THREAD).
Cc: Paul Moore <paul@paul-moore.com>
Cc: Fabricio Voznika <fvoznika@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 20:12:11 +00:00
|
|
|
SECCOMP_RET_KILL_PROCESS_NAME " "
|
2017-08-11 19:53:18 +00:00
|
|
|
SECCOMP_RET_KILL_THREAD_NAME " "
|
|
|
|
SECCOMP_RET_TRAP_NAME " "
|
|
|
|
SECCOMP_RET_ERRNO_NAME " "
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
SECCOMP_RET_USER_NOTIF_NAME " "
|
2017-08-11 19:53:18 +00:00
|
|
|
SECCOMP_RET_TRACE_NAME " "
|
|
|
|
SECCOMP_RET_LOG_NAME " "
|
|
|
|
SECCOMP_RET_ALLOW_NAME;
|
2017-08-11 04:33:52 +00:00
|
|
|
|
2017-08-11 04:33:54 +00:00
|
|
|
struct seccomp_log_name {
|
|
|
|
u32 log;
|
|
|
|
const char *name;
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct seccomp_log_name seccomp_log_names[] = {
|
seccomp: Implement SECCOMP_RET_KILL_PROCESS action
Right now, SECCOMP_RET_KILL_THREAD (neé SECCOMP_RET_KILL) kills the
current thread. There have been a few requests for this to kill the entire
process (the thread group). This cannot be just changed (discovered when
adding coredump support since coredumping kills the entire process)
because there are userspace programs depending on the thread-kill
behavior.
Instead, implement SECCOMP_RET_KILL_PROCESS, which is 0x80000000, and can
be processed as "-1" by the kernel, below the existing RET_KILL that is
ABI-set to "0". For userspace, SECCOMP_RET_ACTION_FULL is added to expand
the mask to the signed bit. Old userspace using the SECCOMP_RET_ACTION
mask will see SECCOMP_RET_KILL_PROCESS as 0 still, but this would only
be visible when examining the siginfo in a core dump from a RET_KILL_*,
where it will think it was thread-killed instead of process-killed.
Attempts to introduce this behavior via other ways (filter flags,
seccomp struct flags, masked RET_DATA bits) all come with weird
side-effects and baggage. This change preserves the central behavioral
expectations of the seccomp filter engine without putting too great
a burden on changes needed in userspace to use the new action.
The new action is discoverable by userspace through either the new
actions_avail sysctl or through the SECCOMP_GET_ACTION_AVAIL seccomp
operation. If used without checking for availability, old kernels
will treat RET_KILL_PROCESS as RET_KILL_THREAD (since the old mask
will produce RET_KILL_THREAD).
Cc: Paul Moore <paul@paul-moore.com>
Cc: Fabricio Voznika <fvoznika@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 20:12:11 +00:00
|
|
|
{ SECCOMP_LOG_KILL_PROCESS, SECCOMP_RET_KILL_PROCESS_NAME },
|
2017-08-11 19:53:18 +00:00
|
|
|
{ SECCOMP_LOG_KILL_THREAD, SECCOMP_RET_KILL_THREAD_NAME },
|
2017-08-11 04:33:54 +00:00
|
|
|
{ SECCOMP_LOG_TRAP, SECCOMP_RET_TRAP_NAME },
|
|
|
|
{ SECCOMP_LOG_ERRNO, SECCOMP_RET_ERRNO_NAME },
|
seccomp: add a return code to trap to userspace
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
|
|
|
{ SECCOMP_LOG_USER_NOTIF, SECCOMP_RET_USER_NOTIF_NAME },
|
2017-08-11 04:33:54 +00:00
|
|
|
{ SECCOMP_LOG_TRACE, SECCOMP_RET_TRACE_NAME },
|
seccomp: Action to log before allowing
Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing
the syscall. At the implementation level, this action is identical to
the existing SECCOMP_RET_ALLOW action. However, it can be very useful when
initially developing a seccomp filter for an application. The developer
can set the default action to be SECCOMP_RET_LOG, maybe mark any
obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the
application through its paces. A list of syscalls that triggered the
default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and
that list can be used to build the syscall whitelist. Finally, the
developer can change the default action to the desired value.
This provides a more friendly experience than seeing the application get
killed, then updating the filter and rebuilding the app, seeing the
application get killed due to a different syscall, then updating the
filter and rebuilding the app, etc.
The functionality is similar to what's supported by the various LSMs.
SELinux has permissive mode, AppArmor has complain mode, SMACK has
bring-up mode, etc.
SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow
while logging is slightly more restrictive than quietly allowing.
Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of
inspecting the audit log to verify that the syscall was logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if action == RET_LOG && RET_LOG in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:57 +00:00
|
|
|
{ SECCOMP_LOG_LOG, SECCOMP_RET_LOG_NAME },
|
2017-08-11 04:33:54 +00:00
|
|
|
{ SECCOMP_LOG_ALLOW, SECCOMP_RET_ALLOW_NAME },
|
|
|
|
{ }
|
|
|
|
};
|
|
|
|
|
|
|
|
static bool seccomp_names_from_actions_logged(char *names, size_t size,
|
2018-05-04 01:08:13 +00:00
|
|
|
u32 actions_logged,
|
|
|
|
const char *sep)
|
2017-08-11 04:33:54 +00:00
|
|
|
{
|
|
|
|
const struct seccomp_log_name *cur;
|
2018-05-04 01:08:13 +00:00
|
|
|
bool append_sep = false;
|
2017-08-11 04:33:54 +00:00
|
|
|
|
|
|
|
for (cur = seccomp_log_names; cur->name && size; cur++) {
|
|
|
|
ssize_t ret;
|
|
|
|
|
|
|
|
if (!(actions_logged & cur->log))
|
|
|
|
continue;
|
|
|
|
|
2018-05-04 01:08:13 +00:00
|
|
|
if (append_sep) {
|
|
|
|
ret = strscpy(names, sep, size);
|
2017-08-11 04:33:54 +00:00
|
|
|
if (ret < 0)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
names += ret;
|
|
|
|
size -= ret;
|
|
|
|
} else
|
2018-05-04 01:08:13 +00:00
|
|
|
append_sep = true;
|
2017-08-11 04:33:54 +00:00
|
|
|
|
|
|
|
ret = strscpy(names, cur->name, size);
|
|
|
|
if (ret < 0)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
names += ret;
|
|
|
|
size -= ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool seccomp_action_logged_from_name(u32 *action_logged,
|
|
|
|
const char *name)
|
|
|
|
{
|
|
|
|
const struct seccomp_log_name *cur;
|
|
|
|
|
|
|
|
for (cur = seccomp_log_names; cur->name; cur++) {
|
|
|
|
if (!strcmp(cur->name, name)) {
|
|
|
|
*action_logged = cur->log;
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool seccomp_actions_logged_from_names(u32 *actions_logged, char *names)
|
|
|
|
{
|
|
|
|
char *name;
|
|
|
|
|
|
|
|
*actions_logged = 0;
|
|
|
|
while ((name = strsep(&names, " ")) && *name) {
|
|
|
|
u32 action_logged = 0;
|
|
|
|
|
|
|
|
if (!seccomp_action_logged_from_name(&action_logged, name))
|
|
|
|
return false;
|
|
|
|
|
|
|
|
*actions_logged |= action_logged;
|
|
|
|
}
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2020-11-20 17:05:45 +00:00
|
|
|
static int read_actions_logged(struct ctl_table *ro_table, void *buffer,
|
2018-05-04 01:08:12 +00:00
|
|
|
size_t *lenp, loff_t *ppos)
|
2017-08-11 04:33:54 +00:00
|
|
|
{
|
|
|
|
char names[sizeof(seccomp_actions_avail)];
|
|
|
|
struct ctl_table table;
|
2018-05-04 01:08:12 +00:00
|
|
|
|
|
|
|
memset(names, 0, sizeof(names));
|
|
|
|
|
|
|
|
if (!seccomp_names_from_actions_logged(names, sizeof(names),
|
2018-05-04 01:08:13 +00:00
|
|
|
seccomp_actions_logged, " "))
|
2018-05-04 01:08:12 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
table = *ro_table;
|
|
|
|
table.data = names;
|
|
|
|
table.maxlen = sizeof(names);
|
|
|
|
return proc_dostring(&table, 0, buffer, lenp, ppos);
|
|
|
|
}
|
|
|
|
|
2020-11-20 17:05:45 +00:00
|
|
|
static int write_actions_logged(struct ctl_table *ro_table, void *buffer,
|
seccomp: Audit attempts to modify the actions_logged sysctl
The decision to log a seccomp action will always be subject to the
value of the kernel.seccomp.actions_logged sysctl, even for processes
that are being inspected via the audit subsystem, in an upcoming patch.
Therefore, we need to emit an audit record on attempts at writing to the
actions_logged sysctl when auditing is enabled.
This patch updates the write handler for the actions_logged sysctl to
emit an audit record on attempts to write to the sysctl. Successful
writes to the sysctl will result in a record that includes a normalized
list of logged actions in the "actions" field and a "res" field equal to
1. Unsuccessful writes to the sysctl will result in a record that
doesn't include the "actions" field and has a "res" field equal to 0.
Not all unsuccessful writes to the sysctl are audited. For example, an
audit record will not be emitted if an unprivileged process attempts to
open the sysctl file for reading since that access control check is not
part of the sysctl's write handler.
Below are some example audit records when writing various strings to the
actions_logged sysctl.
Writing "not-a-real-action", when the kernel.seccomp.actions_logged
sysctl previously was "kill_process kill_thread trap errno trace log",
emits this audit record:
type=CONFIG_CHANGE msg=audit(1525392371.454:120): op=seccomp-logging
actions=? old-actions=kill_process,kill_thread,trap,errno,trace,log
res=0
If you then write "kill_process kill_thread errno trace log", this audit
record is emitted:
type=CONFIG_CHANGE msg=audit(1525392401.645:126): op=seccomp-logging
actions=kill_process,kill_thread,errno,trace,log
old-actions=kill_process,kill_thread,trap,errno,trace,log res=1
If you then write "log log errno trace kill_process kill_thread", which
is unordered and contains the log action twice, it results in the same
actions value as the previous record:
type=CONFIG_CHANGE msg=audit(1525392436.354:132): op=seccomp-logging
actions=kill_process,kill_thread,errno,trace,log
old-actions=kill_process,kill_thread,errno,trace,log res=1
If you then write an empty string to the sysctl, this audit record is
emitted:
type=CONFIG_CHANGE msg=audit(1525392494.413:138): op=seccomp-logging
actions=(none) old-actions=kill_process,kill_thread,errno,trace,log
res=1
No audit records are generated when reading the actions_logged sysctl.
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-04 01:08:14 +00:00
|
|
|
size_t *lenp, loff_t *ppos, u32 *actions_logged)
|
2017-08-11 04:33:54 +00:00
|
|
|
{
|
|
|
|
char names[sizeof(seccomp_actions_avail)];
|
|
|
|
struct ctl_table table;
|
|
|
|
int ret;
|
|
|
|
|
2018-05-04 01:08:12 +00:00
|
|
|
if (!capable(CAP_SYS_ADMIN))
|
2017-08-11 04:33:54 +00:00
|
|
|
return -EPERM;
|
|
|
|
|
|
|
|
memset(names, 0, sizeof(names));
|
|
|
|
|
|
|
|
table = *ro_table;
|
|
|
|
table.data = names;
|
|
|
|
table.maxlen = sizeof(names);
|
2018-05-04 01:08:12 +00:00
|
|
|
ret = proc_dostring(&table, 1, buffer, lenp, ppos);
|
2017-08-11 04:33:54 +00:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
seccomp: Audit attempts to modify the actions_logged sysctl
The decision to log a seccomp action will always be subject to the
value of the kernel.seccomp.actions_logged sysctl, even for processes
that are being inspected via the audit subsystem, in an upcoming patch.
Therefore, we need to emit an audit record on attempts at writing to the
actions_logged sysctl when auditing is enabled.
This patch updates the write handler for the actions_logged sysctl to
emit an audit record on attempts to write to the sysctl. Successful
writes to the sysctl will result in a record that includes a normalized
list of logged actions in the "actions" field and a "res" field equal to
1. Unsuccessful writes to the sysctl will result in a record that
doesn't include the "actions" field and has a "res" field equal to 0.
Not all unsuccessful writes to the sysctl are audited. For example, an
audit record will not be emitted if an unprivileged process attempts to
open the sysctl file for reading since that access control check is not
part of the sysctl's write handler.
Below are some example audit records when writing various strings to the
actions_logged sysctl.
Writing "not-a-real-action", when the kernel.seccomp.actions_logged
sysctl previously was "kill_process kill_thread trap errno trace log",
emits this audit record:
type=CONFIG_CHANGE msg=audit(1525392371.454:120): op=seccomp-logging
actions=? old-actions=kill_process,kill_thread,trap,errno,trace,log
res=0
If you then write "kill_process kill_thread errno trace log", this audit
record is emitted:
type=CONFIG_CHANGE msg=audit(1525392401.645:126): op=seccomp-logging
actions=kill_process,kill_thread,errno,trace,log
old-actions=kill_process,kill_thread,trap,errno,trace,log res=1
If you then write "log log errno trace kill_process kill_thread", which
is unordered and contains the log action twice, it results in the same
actions value as the previous record:
type=CONFIG_CHANGE msg=audit(1525392436.354:132): op=seccomp-logging
actions=kill_process,kill_thread,errno,trace,log
old-actions=kill_process,kill_thread,errno,trace,log res=1
If you then write an empty string to the sysctl, this audit record is
emitted:
type=CONFIG_CHANGE msg=audit(1525392494.413:138): op=seccomp-logging
actions=(none) old-actions=kill_process,kill_thread,errno,trace,log
res=1
No audit records are generated when reading the actions_logged sysctl.
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-04 01:08:14 +00:00
|
|
|
if (!seccomp_actions_logged_from_names(actions_logged, table.data))
|
2018-05-04 01:08:12 +00:00
|
|
|
return -EINVAL;
|
2017-08-11 04:33:54 +00:00
|
|
|
|
seccomp: Audit attempts to modify the actions_logged sysctl
The decision to log a seccomp action will always be subject to the
value of the kernel.seccomp.actions_logged sysctl, even for processes
that are being inspected via the audit subsystem, in an upcoming patch.
Therefore, we need to emit an audit record on attempts at writing to the
actions_logged sysctl when auditing is enabled.
This patch updates the write handler for the actions_logged sysctl to
emit an audit record on attempts to write to the sysctl. Successful
writes to the sysctl will result in a record that includes a normalized
list of logged actions in the "actions" field and a "res" field equal to
1. Unsuccessful writes to the sysctl will result in a record that
doesn't include the "actions" field and has a "res" field equal to 0.
Not all unsuccessful writes to the sysctl are audited. For example, an
audit record will not be emitted if an unprivileged process attempts to
open the sysctl file for reading since that access control check is not
part of the sysctl's write handler.
Below are some example audit records when writing various strings to the
actions_logged sysctl.
Writing "not-a-real-action", when the kernel.seccomp.actions_logged
sysctl previously was "kill_process kill_thread trap errno trace log",
emits this audit record:
type=CONFIG_CHANGE msg=audit(1525392371.454:120): op=seccomp-logging
actions=? old-actions=kill_process,kill_thread,trap,errno,trace,log
res=0
If you then write "kill_process kill_thread errno trace log", this audit
record is emitted:
type=CONFIG_CHANGE msg=audit(1525392401.645:126): op=seccomp-logging
actions=kill_process,kill_thread,errno,trace,log
old-actions=kill_process,kill_thread,trap,errno,trace,log res=1
If you then write "log log errno trace kill_process kill_thread", which
is unordered and contains the log action twice, it results in the same
actions value as the previous record:
type=CONFIG_CHANGE msg=audit(1525392436.354:132): op=seccomp-logging
actions=kill_process,kill_thread,errno,trace,log
old-actions=kill_process,kill_thread,errno,trace,log res=1
If you then write an empty string to the sysctl, this audit record is
emitted:
type=CONFIG_CHANGE msg=audit(1525392494.413:138): op=seccomp-logging
actions=(none) old-actions=kill_process,kill_thread,errno,trace,log
res=1
No audit records are generated when reading the actions_logged sysctl.
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-04 01:08:14 +00:00
|
|
|
if (*actions_logged & SECCOMP_LOG_ALLOW)
|
2018-05-04 01:08:12 +00:00
|
|
|
return -EINVAL;
|
2017-08-11 04:33:54 +00:00
|
|
|
|
seccomp: Audit attempts to modify the actions_logged sysctl
The decision to log a seccomp action will always be subject to the
value of the kernel.seccomp.actions_logged sysctl, even for processes
that are being inspected via the audit subsystem, in an upcoming patch.
Therefore, we need to emit an audit record on attempts at writing to the
actions_logged sysctl when auditing is enabled.
This patch updates the write handler for the actions_logged sysctl to
emit an audit record on attempts to write to the sysctl. Successful
writes to the sysctl will result in a record that includes a normalized
list of logged actions in the "actions" field and a "res" field equal to
1. Unsuccessful writes to the sysctl will result in a record that
doesn't include the "actions" field and has a "res" field equal to 0.
Not all unsuccessful writes to the sysctl are audited. For example, an
audit record will not be emitted if an unprivileged process attempts to
open the sysctl file for reading since that access control check is not
part of the sysctl's write handler.
Below are some example audit records when writing various strings to the
actions_logged sysctl.
Writing "not-a-real-action", when the kernel.seccomp.actions_logged
sysctl previously was "kill_process kill_thread trap errno trace log",
emits this audit record:
type=CONFIG_CHANGE msg=audit(1525392371.454:120): op=seccomp-logging
actions=? old-actions=kill_process,kill_thread,trap,errno,trace,log
res=0
If you then write "kill_process kill_thread errno trace log", this audit
record is emitted:
type=CONFIG_CHANGE msg=audit(1525392401.645:126): op=seccomp-logging
actions=kill_process,kill_thread,errno,trace,log
old-actions=kill_process,kill_thread,trap,errno,trace,log res=1
If you then write "log log errno trace kill_process kill_thread", which
is unordered and contains the log action twice, it results in the same
actions value as the previous record:
type=CONFIG_CHANGE msg=audit(1525392436.354:132): op=seccomp-logging
actions=kill_process,kill_thread,errno,trace,log
old-actions=kill_process,kill_thread,errno,trace,log res=1
If you then write an empty string to the sysctl, this audit record is
emitted:
type=CONFIG_CHANGE msg=audit(1525392494.413:138): op=seccomp-logging
actions=(none) old-actions=kill_process,kill_thread,errno,trace,log
res=1
No audit records are generated when reading the actions_logged sysctl.
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-04 01:08:14 +00:00
|
|
|
seccomp_actions_logged = *actions_logged;
|
2017-08-11 04:33:54 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
seccomp: Audit attempts to modify the actions_logged sysctl
The decision to log a seccomp action will always be subject to the
value of the kernel.seccomp.actions_logged sysctl, even for processes
that are being inspected via the audit subsystem, in an upcoming patch.
Therefore, we need to emit an audit record on attempts at writing to the
actions_logged sysctl when auditing is enabled.
This patch updates the write handler for the actions_logged sysctl to
emit an audit record on attempts to write to the sysctl. Successful
writes to the sysctl will result in a record that includes a normalized
list of logged actions in the "actions" field and a "res" field equal to
1. Unsuccessful writes to the sysctl will result in a record that
doesn't include the "actions" field and has a "res" field equal to 0.
Not all unsuccessful writes to the sysctl are audited. For example, an
audit record will not be emitted if an unprivileged process attempts to
open the sysctl file for reading since that access control check is not
part of the sysctl's write handler.
Below are some example audit records when writing various strings to the
actions_logged sysctl.
Writing "not-a-real-action", when the kernel.seccomp.actions_logged
sysctl previously was "kill_process kill_thread trap errno trace log",
emits this audit record:
type=CONFIG_CHANGE msg=audit(1525392371.454:120): op=seccomp-logging
actions=? old-actions=kill_process,kill_thread,trap,errno,trace,log
res=0
If you then write "kill_process kill_thread errno trace log", this audit
record is emitted:
type=CONFIG_CHANGE msg=audit(1525392401.645:126): op=seccomp-logging
actions=kill_process,kill_thread,errno,trace,log
old-actions=kill_process,kill_thread,trap,errno,trace,log res=1
If you then write "log log errno trace kill_process kill_thread", which
is unordered and contains the log action twice, it results in the same
actions value as the previous record:
type=CONFIG_CHANGE msg=audit(1525392436.354:132): op=seccomp-logging
actions=kill_process,kill_thread,errno,trace,log
old-actions=kill_process,kill_thread,errno,trace,log res=1
If you then write an empty string to the sysctl, this audit record is
emitted:
type=CONFIG_CHANGE msg=audit(1525392494.413:138): op=seccomp-logging
actions=(none) old-actions=kill_process,kill_thread,errno,trace,log
res=1
No audit records are generated when reading the actions_logged sysctl.
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-04 01:08:14 +00:00
|
|
|
static void audit_actions_logged(u32 actions_logged, u32 old_actions_logged,
|
|
|
|
int ret)
|
|
|
|
{
|
|
|
|
char names[sizeof(seccomp_actions_avail)];
|
|
|
|
char old_names[sizeof(seccomp_actions_avail)];
|
|
|
|
const char *new = names;
|
|
|
|
const char *old = old_names;
|
2017-08-11 04:33:54 +00:00
|
|
|
|
seccomp: Audit attempts to modify the actions_logged sysctl
The decision to log a seccomp action will always be subject to the
value of the kernel.seccomp.actions_logged sysctl, even for processes
that are being inspected via the audit subsystem, in an upcoming patch.
Therefore, we need to emit an audit record on attempts at writing to the
actions_logged sysctl when auditing is enabled.
This patch updates the write handler for the actions_logged sysctl to
emit an audit record on attempts to write to the sysctl. Successful
writes to the sysctl will result in a record that includes a normalized
list of logged actions in the "actions" field and a "res" field equal to
1. Unsuccessful writes to the sysctl will result in a record that
doesn't include the "actions" field and has a "res" field equal to 0.
Not all unsuccessful writes to the sysctl are audited. For example, an
audit record will not be emitted if an unprivileged process attempts to
open the sysctl file for reading since that access control check is not
part of the sysctl's write handler.
Below are some example audit records when writing various strings to the
actions_logged sysctl.
Writing "not-a-real-action", when the kernel.seccomp.actions_logged
sysctl previously was "kill_process kill_thread trap errno trace log",
emits this audit record:
type=CONFIG_CHANGE msg=audit(1525392371.454:120): op=seccomp-logging
actions=? old-actions=kill_process,kill_thread,trap,errno,trace,log
res=0
If you then write "kill_process kill_thread errno trace log", this audit
record is emitted:
type=CONFIG_CHANGE msg=audit(1525392401.645:126): op=seccomp-logging
actions=kill_process,kill_thread,errno,trace,log
old-actions=kill_process,kill_thread,trap,errno,trace,log res=1
If you then write "log log errno trace kill_process kill_thread", which
is unordered and contains the log action twice, it results in the same
actions value as the previous record:
type=CONFIG_CHANGE msg=audit(1525392436.354:132): op=seccomp-logging
actions=kill_process,kill_thread,errno,trace,log
old-actions=kill_process,kill_thread,errno,trace,log res=1
If you then write an empty string to the sysctl, this audit record is
emitted:
type=CONFIG_CHANGE msg=audit(1525392494.413:138): op=seccomp-logging
actions=(none) old-actions=kill_process,kill_thread,errno,trace,log
res=1
No audit records are generated when reading the actions_logged sysctl.
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-04 01:08:14 +00:00
|
|
|
if (!audit_enabled)
|
|
|
|
return;
|
|
|
|
|
|
|
|
memset(names, 0, sizeof(names));
|
|
|
|
memset(old_names, 0, sizeof(old_names));
|
|
|
|
|
|
|
|
if (ret)
|
|
|
|
new = "?";
|
|
|
|
else if (!actions_logged)
|
|
|
|
new = "(none)";
|
|
|
|
else if (!seccomp_names_from_actions_logged(names, sizeof(names),
|
|
|
|
actions_logged, ","))
|
|
|
|
new = "?";
|
|
|
|
|
|
|
|
if (!old_actions_logged)
|
|
|
|
old = "(none)";
|
|
|
|
else if (!seccomp_names_from_actions_logged(old_names,
|
|
|
|
sizeof(old_names),
|
|
|
|
old_actions_logged, ","))
|
|
|
|
old = "?";
|
|
|
|
|
|
|
|
return audit_seccomp_actions_logged(new, old, !ret);
|
|
|
|
}
|
|
|
|
|
2018-05-04 01:08:12 +00:00
|
|
|
static int seccomp_actions_logged_handler(struct ctl_table *ro_table, int write,
|
2020-04-24 06:43:38 +00:00
|
|
|
void *buffer, size_t *lenp,
|
2018-05-04 01:08:12 +00:00
|
|
|
loff_t *ppos)
|
|
|
|
{
|
seccomp: Audit attempts to modify the actions_logged sysctl
The decision to log a seccomp action will always be subject to the
value of the kernel.seccomp.actions_logged sysctl, even for processes
that are being inspected via the audit subsystem, in an upcoming patch.
Therefore, we need to emit an audit record on attempts at writing to the
actions_logged sysctl when auditing is enabled.
This patch updates the write handler for the actions_logged sysctl to
emit an audit record on attempts to write to the sysctl. Successful
writes to the sysctl will result in a record that includes a normalized
list of logged actions in the "actions" field and a "res" field equal to
1. Unsuccessful writes to the sysctl will result in a record that
doesn't include the "actions" field and has a "res" field equal to 0.
Not all unsuccessful writes to the sysctl are audited. For example, an
audit record will not be emitted if an unprivileged process attempts to
open the sysctl file for reading since that access control check is not
part of the sysctl's write handler.
Below are some example audit records when writing various strings to the
actions_logged sysctl.
Writing "not-a-real-action", when the kernel.seccomp.actions_logged
sysctl previously was "kill_process kill_thread trap errno trace log",
emits this audit record:
type=CONFIG_CHANGE msg=audit(1525392371.454:120): op=seccomp-logging
actions=? old-actions=kill_process,kill_thread,trap,errno,trace,log
res=0
If you then write "kill_process kill_thread errno trace log", this audit
record is emitted:
type=CONFIG_CHANGE msg=audit(1525392401.645:126): op=seccomp-logging
actions=kill_process,kill_thread,errno,trace,log
old-actions=kill_process,kill_thread,trap,errno,trace,log res=1
If you then write "log log errno trace kill_process kill_thread", which
is unordered and contains the log action twice, it results in the same
actions value as the previous record:
type=CONFIG_CHANGE msg=audit(1525392436.354:132): op=seccomp-logging
actions=kill_process,kill_thread,errno,trace,log
old-actions=kill_process,kill_thread,errno,trace,log res=1
If you then write an empty string to the sysctl, this audit record is
emitted:
type=CONFIG_CHANGE msg=audit(1525392494.413:138): op=seccomp-logging
actions=(none) old-actions=kill_process,kill_thread,errno,trace,log
res=1
No audit records are generated when reading the actions_logged sysctl.
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-04 01:08:14 +00:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (write) {
|
|
|
|
u32 actions_logged = 0;
|
|
|
|
u32 old_actions_logged = seccomp_actions_logged;
|
|
|
|
|
|
|
|
ret = write_actions_logged(ro_table, buffer, lenp, ppos,
|
|
|
|
&actions_logged);
|
|
|
|
audit_actions_logged(actions_logged, old_actions_logged, ret);
|
|
|
|
} else
|
|
|
|
ret = read_actions_logged(ro_table, buffer, lenp, ppos);
|
|
|
|
|
|
|
|
return ret;
|
2017-08-11 04:33:54 +00:00
|
|
|
}
|
|
|
|
|
2017-08-11 04:33:52 +00:00
|
|
|
static struct ctl_path seccomp_sysctl_path[] = {
|
|
|
|
{ .procname = "kernel", },
|
|
|
|
{ .procname = "seccomp", },
|
|
|
|
{ }
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct ctl_table seccomp_sysctl_table[] = {
|
|
|
|
{
|
|
|
|
.procname = "actions_avail",
|
|
|
|
.data = (void *) &seccomp_actions_avail,
|
|
|
|
.maxlen = sizeof(seccomp_actions_avail),
|
|
|
|
.mode = 0444,
|
|
|
|
.proc_handler = proc_dostring,
|
|
|
|
},
|
2017-08-11 04:33:54 +00:00
|
|
|
{
|
|
|
|
.procname = "actions_logged",
|
|
|
|
.mode = 0644,
|
|
|
|
.proc_handler = seccomp_actions_logged_handler,
|
|
|
|
},
|
2017-08-11 04:33:52 +00:00
|
|
|
{ }
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init seccomp_sysctl_init(void)
|
|
|
|
{
|
|
|
|
struct ctl_table_header *hdr;
|
|
|
|
|
|
|
|
hdr = register_sysctl_paths(seccomp_sysctl_path, seccomp_sysctl_table);
|
|
|
|
if (!hdr)
|
2020-06-16 05:02:56 +00:00
|
|
|
pr_warn("sysctl registration failed\n");
|
2017-08-11 04:33:52 +00:00
|
|
|
else
|
|
|
|
kmemleak_not_leak(hdr);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
device_initcall(seccomp_sysctl_init)
|
|
|
|
|
|
|
|
#endif /* CONFIG_SYSCTL */
|
2020-11-11 13:33:54 +00:00
|
|
|
|
|
|
|
#ifdef CONFIG_SECCOMP_CACHE_DEBUG
|
|
|
|
/* Currently CONFIG_SECCOMP_CACHE_DEBUG implies SECCOMP_ARCH_NATIVE */
|
|
|
|
static void proc_pid_seccomp_cache_arch(struct seq_file *m, const char *name,
|
|
|
|
const void *bitmap, size_t bitmap_size)
|
|
|
|
{
|
|
|
|
int nr;
|
|
|
|
|
|
|
|
for (nr = 0; nr < bitmap_size; nr++) {
|
|
|
|
bool cached = test_bit(nr, bitmap);
|
|
|
|
char *status = cached ? "ALLOW" : "FILTER";
|
|
|
|
|
|
|
|
seq_printf(m, "%s %d %s\n", name, nr, status);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
int proc_pid_seccomp_cache(struct seq_file *m, struct pid_namespace *ns,
|
|
|
|
struct pid *pid, struct task_struct *task)
|
|
|
|
{
|
|
|
|
struct seccomp_filter *f;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We don't want some sandboxed process to know what their seccomp
|
|
|
|
* filters consist of.
|
|
|
|
*/
|
|
|
|
if (!file_ns_capable(m->file, &init_user_ns, CAP_SYS_ADMIN))
|
|
|
|
return -EACCES;
|
|
|
|
|
|
|
|
if (!lock_task_sighand(task, &flags))
|
|
|
|
return -ESRCH;
|
|
|
|
|
|
|
|
f = READ_ONCE(task->seccomp.filter);
|
|
|
|
if (!f) {
|
|
|
|
unlock_task_sighand(task, &flags);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* prevent filter from being freed while we are printing it */
|
|
|
|
__get_seccomp_filter(f);
|
|
|
|
unlock_task_sighand(task, &flags);
|
|
|
|
|
|
|
|
proc_pid_seccomp_cache_arch(m, SECCOMP_ARCH_NATIVE_NAME,
|
|
|
|
f->cache.allow_native,
|
|
|
|
SECCOMP_ARCH_NATIVE_NR);
|
|
|
|
|
|
|
|
#ifdef SECCOMP_ARCH_COMPAT
|
|
|
|
proc_pid_seccomp_cache_arch(m, SECCOMP_ARCH_COMPAT_NAME,
|
|
|
|
f->cache.allow_compat,
|
|
|
|
SECCOMP_ARCH_COMPAT_NR);
|
|
|
|
#endif /* SECCOMP_ARCH_COMPAT */
|
|
|
|
|
|
|
|
__put_seccomp_filter(f);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_SECCOMP_CACHE_DEBUG */
|