linux-stable/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h

601 lines
16 KiB
C
Raw Normal View History

/*
* Copyright 2000 ATI Technologies Inc., Markham, Ontario, and
* VA Linux Systems Inc., Fremont, California.
* Copyright 2008 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Original Authors:
* Kevin E. Martin, Rickard E. Faith, Alan Hourihane
*
* Kernel port Author: Dave Airlie
*/
#ifndef AMDGPU_MODE_H
#define AMDGPU_MODE_H
#include <drm/drm_crtc.h>
#include <drm/drm_edid.h>
#include <drm/drm_dp_helper.h>
#include <drm/drm_fixed.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_plane_helper.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/hrtimer.h>
#include "amdgpu_irq.h"
struct amdgpu_bo;
struct amdgpu_device;
struct amdgpu_encoder;
struct amdgpu_router;
struct amdgpu_hpd;
#define to_amdgpu_crtc(x) container_of(x, struct amdgpu_crtc, base)
#define to_amdgpu_connector(x) container_of(x, struct amdgpu_connector, base)
#define to_amdgpu_encoder(x) container_of(x, struct amdgpu_encoder, base)
#define to_amdgpu_framebuffer(x) container_of(x, struct amdgpu_framebuffer, base)
#define AMDGPU_MAX_HPD_PINS 6
#define AMDGPU_MAX_CRTCS 6
#define AMDGPU_MAX_AFMT_BLOCKS 9
enum amdgpu_rmx_type {
RMX_OFF,
RMX_FULL,
RMX_CENTER,
RMX_ASPECT
};
enum amdgpu_underscan_type {
UNDERSCAN_OFF,
UNDERSCAN_ON,
UNDERSCAN_AUTO,
};
#define AMDGPU_HPD_CONNECT_INT_DELAY_IN_MS 50
#define AMDGPU_HPD_DISCONNECT_INT_DELAY_IN_MS 10
enum amdgpu_hpd_id {
AMDGPU_HPD_1 = 0,
AMDGPU_HPD_2,
AMDGPU_HPD_3,
AMDGPU_HPD_4,
AMDGPU_HPD_5,
AMDGPU_HPD_6,
AMDGPU_HPD_LAST,
AMDGPU_HPD_NONE = 0xff,
};
enum amdgpu_crtc_irq {
AMDGPU_CRTC_IRQ_VBLANK1 = 0,
AMDGPU_CRTC_IRQ_VBLANK2,
AMDGPU_CRTC_IRQ_VBLANK3,
AMDGPU_CRTC_IRQ_VBLANK4,
AMDGPU_CRTC_IRQ_VBLANK5,
AMDGPU_CRTC_IRQ_VBLANK6,
AMDGPU_CRTC_IRQ_VLINE1,
AMDGPU_CRTC_IRQ_VLINE2,
AMDGPU_CRTC_IRQ_VLINE3,
AMDGPU_CRTC_IRQ_VLINE4,
AMDGPU_CRTC_IRQ_VLINE5,
AMDGPU_CRTC_IRQ_VLINE6,
AMDGPU_CRTC_IRQ_LAST,
AMDGPU_CRTC_IRQ_NONE = 0xff
};
enum amdgpu_pageflip_irq {
AMDGPU_PAGEFLIP_IRQ_D1 = 0,
AMDGPU_PAGEFLIP_IRQ_D2,
AMDGPU_PAGEFLIP_IRQ_D3,
AMDGPU_PAGEFLIP_IRQ_D4,
AMDGPU_PAGEFLIP_IRQ_D5,
AMDGPU_PAGEFLIP_IRQ_D6,
AMDGPU_PAGEFLIP_IRQ_LAST,
AMDGPU_PAGEFLIP_IRQ_NONE = 0xff
};
enum amdgpu_flip_status {
AMDGPU_FLIP_NONE,
AMDGPU_FLIP_PENDING,
AMDGPU_FLIP_SUBMITTED
};
#define AMDGPU_MAX_I2C_BUS 16
/* amdgpu gpio-based i2c
* 1. "mask" reg and bits
* grabs the gpio pins for software use
* 0=not held 1=held
* 2. "a" reg and bits
* output pin value
* 0=low 1=high
* 3. "en" reg and bits
* sets the pin direction
* 0=input 1=output
* 4. "y" reg and bits
* input pin value
* 0=low 1=high
*/
struct amdgpu_i2c_bus_rec {
bool valid;
/* id used by atom */
uint8_t i2c_id;
/* id used by atom */
enum amdgpu_hpd_id hpd;
/* can be used with hw i2c engine */
bool hw_capable;
/* uses multi-media i2c engine */
bool mm_i2c;
/* regs and bits */
uint32_t mask_clk_reg;
uint32_t mask_data_reg;
uint32_t a_clk_reg;
uint32_t a_data_reg;
uint32_t en_clk_reg;
uint32_t en_data_reg;
uint32_t y_clk_reg;
uint32_t y_data_reg;
uint32_t mask_clk_mask;
uint32_t mask_data_mask;
uint32_t a_clk_mask;
uint32_t a_data_mask;
uint32_t en_clk_mask;
uint32_t en_data_mask;
uint32_t y_clk_mask;
uint32_t y_data_mask;
};
#define AMDGPU_MAX_BIOS_CONNECTOR 16
/* pll flags */
#define AMDGPU_PLL_USE_BIOS_DIVS (1 << 0)
#define AMDGPU_PLL_NO_ODD_POST_DIV (1 << 1)
#define AMDGPU_PLL_USE_REF_DIV (1 << 2)
#define AMDGPU_PLL_LEGACY (1 << 3)
#define AMDGPU_PLL_PREFER_LOW_REF_DIV (1 << 4)
#define AMDGPU_PLL_PREFER_HIGH_REF_DIV (1 << 5)
#define AMDGPU_PLL_PREFER_LOW_FB_DIV (1 << 6)
#define AMDGPU_PLL_PREFER_HIGH_FB_DIV (1 << 7)
#define AMDGPU_PLL_PREFER_LOW_POST_DIV (1 << 8)
#define AMDGPU_PLL_PREFER_HIGH_POST_DIV (1 << 9)
#define AMDGPU_PLL_USE_FRAC_FB_DIV (1 << 10)
#define AMDGPU_PLL_PREFER_CLOSEST_LOWER (1 << 11)
#define AMDGPU_PLL_USE_POST_DIV (1 << 12)
#define AMDGPU_PLL_IS_LCD (1 << 13)
#define AMDGPU_PLL_PREFER_MINM_OVER_MAXP (1 << 14)
struct amdgpu_pll {
/* reference frequency */
uint32_t reference_freq;
/* fixed dividers */
uint32_t reference_div;
uint32_t post_div;
/* pll in/out limits */
uint32_t pll_in_min;
uint32_t pll_in_max;
uint32_t pll_out_min;
uint32_t pll_out_max;
uint32_t lcd_pll_out_min;
uint32_t lcd_pll_out_max;
uint32_t best_vco;
/* divider limits */
uint32_t min_ref_div;
uint32_t max_ref_div;
uint32_t min_post_div;
uint32_t max_post_div;
uint32_t min_feedback_div;
uint32_t max_feedback_div;
uint32_t min_frac_feedback_div;
uint32_t max_frac_feedback_div;
/* flags for the current clock */
uint32_t flags;
/* pll id */
uint32_t id;
};
struct amdgpu_i2c_chan {
struct i2c_adapter adapter;
struct drm_device *dev;
struct i2c_algo_bit_data bit;
struct amdgpu_i2c_bus_rec rec;
struct drm_dp_aux aux;
bool has_aux;
struct mutex mutex;
};
struct amdgpu_fbdev;
struct amdgpu_afmt {
bool enabled;
int offset;
bool last_buffer_filled_status;
int id;
struct amdgpu_audio_pin *pin;
};
/*
* Audio
*/
struct amdgpu_audio_pin {
int channels;
int rate;
int bits_per_sample;
u8 status_bits;
u8 category_code;
u32 offset;
bool connected;
u32 id;
};
struct amdgpu_audio {
bool enabled;
struct amdgpu_audio_pin pin[AMDGPU_MAX_AFMT_BLOCKS];
int num_pins;
};
struct amdgpu_mode_mc_save {
u32 vga_render_control;
u32 vga_hdp_control;
bool crtc_enabled[AMDGPU_MAX_CRTCS];
};
struct amdgpu_display_funcs {
/* vga render */
void (*set_vga_render_state)(struct amdgpu_device *adev, bool render);
/* display watermarks */
void (*bandwidth_update)(struct amdgpu_device *adev);
/* get frame count */
u32 (*vblank_get_counter)(struct amdgpu_device *adev, int crtc);
/* wait for vblank */
void (*vblank_wait)(struct amdgpu_device *adev, int crtc);
/* is dce hung */
bool (*is_display_hung)(struct amdgpu_device *adev);
/* set backlight level */
void (*backlight_set_level)(struct amdgpu_encoder *amdgpu_encoder,
u8 level);
/* get backlight level */
u8 (*backlight_get_level)(struct amdgpu_encoder *amdgpu_encoder);
/* hotplug detect */
bool (*hpd_sense)(struct amdgpu_device *adev, enum amdgpu_hpd_id hpd);
void (*hpd_set_polarity)(struct amdgpu_device *adev,
enum amdgpu_hpd_id hpd);
u32 (*hpd_get_gpio_reg)(struct amdgpu_device *adev);
/* pageflipping */
void (*page_flip)(struct amdgpu_device *adev,
int crtc_id, u64 crtc_base, bool async);
int (*page_flip_get_scanoutpos)(struct amdgpu_device *adev, int crtc,
u32 *vbl, u32 *position);
/* display topology setup */
void (*add_encoder)(struct amdgpu_device *adev,
uint32_t encoder_enum,
uint32_t supported_device,
u16 caps);
void (*add_connector)(struct amdgpu_device *adev,
uint32_t connector_id,
uint32_t supported_device,
int connector_type,
struct amdgpu_i2c_bus_rec *i2c_bus,
uint16_t connector_object_id,
struct amdgpu_hpd *hpd,
struct amdgpu_router *router);
void (*stop_mc_access)(struct amdgpu_device *adev,
struct amdgpu_mode_mc_save *save);
void (*resume_mc_access)(struct amdgpu_device *adev,
struct amdgpu_mode_mc_save *save);
};
struct amdgpu_mode_info {
struct atom_context *atom_context;
struct card_info *atom_card_info;
bool mode_config_initialized;
struct amdgpu_crtc *crtcs[AMDGPU_MAX_CRTCS];
struct amdgpu_afmt *afmt[AMDGPU_MAX_AFMT_BLOCKS];
/* DVI-I properties */
struct drm_property *coherent_mode_property;
/* DAC enable load detect */
struct drm_property *load_detect_property;
/* underscan */
struct drm_property *underscan_property;
struct drm_property *underscan_hborder_property;
struct drm_property *underscan_vborder_property;
/* audio */
struct drm_property *audio_property;
/* FMT dithering */
struct drm_property *dither_property;
/* hardcoded DFP edid from BIOS */
struct edid *bios_hardcoded_edid;
int bios_hardcoded_edid_size;
/* pointer to fbdev info structure */
struct amdgpu_fbdev *rfbdev;
/* firmware flags */
u16 firmware_flags;
/* pointer to backlight encoder */
struct amdgpu_encoder *bl_encoder;
struct amdgpu_audio audio; /* audio stuff */
int num_crtc; /* number of crtcs */
int num_hpd; /* number of hpd pins */
int num_dig; /* number of dig blocks */
int disp_priority;
const struct amdgpu_display_funcs *funcs;
struct hrtimer vblank_timer;
enum amdgpu_interrupt_state vsync_timer_enabled;
};
#define AMDGPU_MAX_BL_LEVEL 0xFF
#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE)
struct amdgpu_backlight_privdata {
struct amdgpu_encoder *encoder;
uint8_t negative;
};
#endif
struct amdgpu_atom_ss {
uint16_t percentage;
uint16_t percentage_divider;
uint8_t type;
uint16_t step;
uint8_t delay;
uint8_t range;
uint8_t refdiv;
/* asic_ss */
uint16_t rate;
uint16_t amount;
};
struct amdgpu_crtc {
struct drm_crtc base;
int crtc_id;
u16 lut_r[256], lut_g[256], lut_b[256];
bool enabled;
bool can_tile;
uint32_t crtc_offset;
struct drm_gem_object *cursor_bo;
uint64_t cursor_addr;
int cursor_x;
int cursor_y;
int cursor_hot_x;
int cursor_hot_y;
int cursor_width;
int cursor_height;
int max_cursor_width;
int max_cursor_height;
enum amdgpu_rmx_type rmx_type;
u8 h_border;
u8 v_border;
fixed20_12 vsc;
fixed20_12 hsc;
struct drm_display_mode native_mode;
u32 pll_id;
/* page flipping */
struct amdgpu_flip_work *pflip_works;
enum amdgpu_flip_status pflip_status;
int deferred_flip_completion;
/* pll sharing */
struct amdgpu_atom_ss ss;
bool ss_enabled;
u32 adjusted_clock;
int bpc;
u32 pll_reference_div;
u32 pll_post_div;
u32 pll_flags;
struct drm_encoder *encoder;
struct drm_connector *connector;
/* for dpm */
u32 line_time;
u32 wm_low;
u32 wm_high;
drm/amdgpu: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v3) commit 4dfd6486 "drm: Use vblank timestamps to guesstimate how many vblanks were missed" introduced in Linux 4.4-rc1 makes the drm core more fragile to drivers which don't update hw vblank counters and vblank timestamps in sync with firing of the vblank irq and essentially at leading edge of vblank. This exposed a problem with radeon-kms/amdgpu-kms which do not satisfy above requirements: The vblank irq fires a few scanlines before start of vblank, but programmed pageflips complete at start of vblank and vblank timestamps update at start of vblank, whereas the hw vblank counter increments only later, at start of vsync. This leads to problems like off by one errors for vblank counter updates, vblank counters apparently going backwards or vblank timestamps apparently having time going backwards. The net result is stuttering of graphics in games, or little hangs, as well as total failure of timing sensitive applications. See bug #93147 for an example of the regression on Linux 4.4-rc: https://bugs.freedesktop.org/show_bug.cgi?id=93147 This patch tries to align all above events better from the viewpoint of the drm core / of external callers to fix the problem: 1. The apparent start of vblank is shifted a few scanlines earlier, so the vblank irq now always happens after start of this extended vblank interval and thereby drm_update_vblank_count() always samples the updated vblank count and timestamp of the new vblank interval. To achieve this, the reporting of scanout positions by radeon_get_crtc_scanoutpos() now operates as if the vblank starts radeon_crtc->lb_vblank_lead_lines before the real start of the hw vblank interval. This means that the vblank timestamps which are based on these scanout positions will now update at this earlier start of vblank. 2. The driver->get_vblank_counter() function will bump the returned vblank count as read from the hw by +1 if the query happens after the shifted earlier start of the vblank, but before the real hw increment at start of vsync, so the counter appears to increment at start of vblank in sync with the timestamp update. 3. Calls from vblank irq-context and regular non-irq calls are now treated identical, always simulating the shifted vblank start, to avoid inconsistent results for queries happening from vblank irq vs. happening from drm_vblank_enable() or vblank_disable_fn(). 4. The radeon_flip_work_func will delay mmio programming a pageflip until the start of the real vblank iff it happens to execute inside the shifted earlier start of the vblank, so pageflips now also appear to execute at start of the shifted vblank, in sync with vblank counter and timestamp updates. This to avoid some races between updates of vblank count and timestamps that are used for swap scheduling and pageflip execution which could cause pageflips to execute before the scheduled target vblank. The lb_vblank_lead_lines "fudge" value is calculated as the size of the display controllers line buffer in scanlines for the given video mode: Vblank irq's are triggered by the line buffer logic when the line buffer refill for a video frame ends, ie. when the line buffer source read position enters the hw vblank. This means that a vblank irq could fire at most as many scanlines before the current reported scanout position of the crtc timing generator as the number of scanlines the line buffer can maximally hold for a given video mode. This patch has been successfully tested on a RV730 card with DCE-3 display engine and on a evergreen card with DCE-4 display engine, in single-display and dual-display configuration, with different video modes. A similar patch is needed for amdgpu-kms to fix the same problem. Limitations: - Maybe replace the udelay() in the flip_work_func() by a suitable usleep_range() for a bit better efficiency? Will try that. - Line buffer sizes in pixels are hard-coded on < DCE-4 to a value i just guessed to be high enough to work ok, lacking info on the true sizes atm. Probably fixes: fdo#93147 Port of Mario's radeon fix to amdgpu. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com> (v2) Refine amdgpu_flip_work_func() for better efficiency. In amdgpu_flip_work_func, replace the busy waiting udelay(5) with event lock held by a more performance and energy efficient usleep_range() until at least predicted true start of hw vblank, with some slack for scheduler happiness. Release the event lock during waits to not delay other outputs in doing their stuff, as the waiting can last up to 200 usecs in some cases. Also small fix to code comment and formatting in that function. (v2) Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> (v3) Fix crash in crtc disabled case
2015-12-03 17:31:56 +00:00
u32 lb_vblank_lead_lines;
struct drm_display_mode hw_mode;
};
struct amdgpu_encoder_atom_dig {
bool linkb;
/* atom dig */
bool coherent_mode;
int dig_encoder; /* -1 disabled, 0 DIGA, 1 DIGB, etc. */
/* atom lvds/edp */
uint32_t lcd_misc;
uint16_t panel_pwr_delay;
uint32_t lcd_ss_id;
/* panel mode */
struct drm_display_mode native_mode;
struct backlight_device *bl_dev;
int dpms_mode;
uint8_t backlight_level;
int panel_mode;
struct amdgpu_afmt *afmt;
};
struct amdgpu_encoder {
struct drm_encoder base;
uint32_t encoder_enum;
uint32_t encoder_id;
uint32_t devices;
uint32_t active_device;
uint32_t flags;
uint32_t pixel_clock;
enum amdgpu_rmx_type rmx_type;
enum amdgpu_underscan_type underscan_type;
uint32_t underscan_hborder;
uint32_t underscan_vborder;
struct drm_display_mode native_mode;
void *enc_priv;
int audio_polling_active;
bool is_ext_encoder;
u16 caps;
};
struct amdgpu_connector_atom_dig {
/* displayport */
u8 dpcd[DP_RECEIVER_CAP_SIZE];
u8 dp_sink_type;
int dp_clock;
int dp_lane_count;
bool edp_on;
};
struct amdgpu_gpio_rec {
bool valid;
u8 id;
u32 reg;
u32 mask;
u32 shift;
};
struct amdgpu_hpd {
enum amdgpu_hpd_id hpd;
u8 plugged_state;
struct amdgpu_gpio_rec gpio;
};
struct amdgpu_router {
u32 router_id;
struct amdgpu_i2c_bus_rec i2c_info;
u8 i2c_addr;
/* i2c mux */
bool ddc_valid;
u8 ddc_mux_type;
u8 ddc_mux_control_pin;
u8 ddc_mux_state;
/* clock/data mux */
bool cd_valid;
u8 cd_mux_type;
u8 cd_mux_control_pin;
u8 cd_mux_state;
};
enum amdgpu_connector_audio {
AMDGPU_AUDIO_DISABLE = 0,
AMDGPU_AUDIO_ENABLE = 1,
AMDGPU_AUDIO_AUTO = 2
};
enum amdgpu_connector_dither {
AMDGPU_FMT_DITHER_DISABLE = 0,
AMDGPU_FMT_DITHER_ENABLE = 1,
};
struct amdgpu_connector {
struct drm_connector base;
uint32_t connector_id;
uint32_t devices;
struct amdgpu_i2c_chan *ddc_bus;
/* some systems have an hdmi and vga port with a shared ddc line */
bool shared_ddc;
bool use_digital;
/* we need to mind the EDID between detect
and get modes due to analog/digital/tvencoder */
struct edid *edid;
void *con_priv;
bool dac_load_detect;
bool detected_by_load; /* if the connection status was determined by load */
uint16_t connector_object_id;
struct amdgpu_hpd hpd;
struct amdgpu_router router;
struct amdgpu_i2c_chan *router_bus;
enum amdgpu_connector_audio audio;
enum amdgpu_connector_dither dither;
unsigned pixelclock_for_modeset;
};
struct amdgpu_framebuffer {
struct drm_framebuffer base;
struct drm_gem_object *obj;
};
#define ENCODER_MODE_IS_DP(em) (((em) == ATOM_ENCODER_MODE_DP) || \
((em) == ATOM_ENCODER_MODE_DP_MST))
drm/amdgpu: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v3) commit 4dfd6486 "drm: Use vblank timestamps to guesstimate how many vblanks were missed" introduced in Linux 4.4-rc1 makes the drm core more fragile to drivers which don't update hw vblank counters and vblank timestamps in sync with firing of the vblank irq and essentially at leading edge of vblank. This exposed a problem with radeon-kms/amdgpu-kms which do not satisfy above requirements: The vblank irq fires a few scanlines before start of vblank, but programmed pageflips complete at start of vblank and vblank timestamps update at start of vblank, whereas the hw vblank counter increments only later, at start of vsync. This leads to problems like off by one errors for vblank counter updates, vblank counters apparently going backwards or vblank timestamps apparently having time going backwards. The net result is stuttering of graphics in games, or little hangs, as well as total failure of timing sensitive applications. See bug #93147 for an example of the regression on Linux 4.4-rc: https://bugs.freedesktop.org/show_bug.cgi?id=93147 This patch tries to align all above events better from the viewpoint of the drm core / of external callers to fix the problem: 1. The apparent start of vblank is shifted a few scanlines earlier, so the vblank irq now always happens after start of this extended vblank interval and thereby drm_update_vblank_count() always samples the updated vblank count and timestamp of the new vblank interval. To achieve this, the reporting of scanout positions by radeon_get_crtc_scanoutpos() now operates as if the vblank starts radeon_crtc->lb_vblank_lead_lines before the real start of the hw vblank interval. This means that the vblank timestamps which are based on these scanout positions will now update at this earlier start of vblank. 2. The driver->get_vblank_counter() function will bump the returned vblank count as read from the hw by +1 if the query happens after the shifted earlier start of the vblank, but before the real hw increment at start of vsync, so the counter appears to increment at start of vblank in sync with the timestamp update. 3. Calls from vblank irq-context and regular non-irq calls are now treated identical, always simulating the shifted vblank start, to avoid inconsistent results for queries happening from vblank irq vs. happening from drm_vblank_enable() or vblank_disable_fn(). 4. The radeon_flip_work_func will delay mmio programming a pageflip until the start of the real vblank iff it happens to execute inside the shifted earlier start of the vblank, so pageflips now also appear to execute at start of the shifted vblank, in sync with vblank counter and timestamp updates. This to avoid some races between updates of vblank count and timestamps that are used for swap scheduling and pageflip execution which could cause pageflips to execute before the scheduled target vblank. The lb_vblank_lead_lines "fudge" value is calculated as the size of the display controllers line buffer in scanlines for the given video mode: Vblank irq's are triggered by the line buffer logic when the line buffer refill for a video frame ends, ie. when the line buffer source read position enters the hw vblank. This means that a vblank irq could fire at most as many scanlines before the current reported scanout position of the crtc timing generator as the number of scanlines the line buffer can maximally hold for a given video mode. This patch has been successfully tested on a RV730 card with DCE-3 display engine and on a evergreen card with DCE-4 display engine, in single-display and dual-display configuration, with different video modes. A similar patch is needed for amdgpu-kms to fix the same problem. Limitations: - Maybe replace the udelay() in the flip_work_func() by a suitable usleep_range() for a bit better efficiency? Will try that. - Line buffer sizes in pixels are hard-coded on < DCE-4 to a value i just guessed to be high enough to work ok, lacking info on the true sizes atm. Probably fixes: fdo#93147 Port of Mario's radeon fix to amdgpu. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com> (v2) Refine amdgpu_flip_work_func() for better efficiency. In amdgpu_flip_work_func, replace the busy waiting udelay(5) with event lock held by a more performance and energy efficient usleep_range() until at least predicted true start of hw vblank, with some slack for scheduler happiness. Release the event lock during waits to not delay other outputs in doing their stuff, as the waiting can last up to 200 usecs in some cases. Also small fix to code comment and formatting in that function. (v2) Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> (v3) Fix crash in crtc disabled case
2015-12-03 17:31:56 +00:00
/* Driver internal use only flags of amdgpu_get_crtc_scanoutpos() */
#define USE_REAL_VBLANKSTART (1 << 30)
drm/amdgpu: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v3) commit 4dfd6486 "drm: Use vblank timestamps to guesstimate how many vblanks were missed" introduced in Linux 4.4-rc1 makes the drm core more fragile to drivers which don't update hw vblank counters and vblank timestamps in sync with firing of the vblank irq and essentially at leading edge of vblank. This exposed a problem with radeon-kms/amdgpu-kms which do not satisfy above requirements: The vblank irq fires a few scanlines before start of vblank, but programmed pageflips complete at start of vblank and vblank timestamps update at start of vblank, whereas the hw vblank counter increments only later, at start of vsync. This leads to problems like off by one errors for vblank counter updates, vblank counters apparently going backwards or vblank timestamps apparently having time going backwards. The net result is stuttering of graphics in games, or little hangs, as well as total failure of timing sensitive applications. See bug #93147 for an example of the regression on Linux 4.4-rc: https://bugs.freedesktop.org/show_bug.cgi?id=93147 This patch tries to align all above events better from the viewpoint of the drm core / of external callers to fix the problem: 1. The apparent start of vblank is shifted a few scanlines earlier, so the vblank irq now always happens after start of this extended vblank interval and thereby drm_update_vblank_count() always samples the updated vblank count and timestamp of the new vblank interval. To achieve this, the reporting of scanout positions by radeon_get_crtc_scanoutpos() now operates as if the vblank starts radeon_crtc->lb_vblank_lead_lines before the real start of the hw vblank interval. This means that the vblank timestamps which are based on these scanout positions will now update at this earlier start of vblank. 2. The driver->get_vblank_counter() function will bump the returned vblank count as read from the hw by +1 if the query happens after the shifted earlier start of the vblank, but before the real hw increment at start of vsync, so the counter appears to increment at start of vblank in sync with the timestamp update. 3. Calls from vblank irq-context and regular non-irq calls are now treated identical, always simulating the shifted vblank start, to avoid inconsistent results for queries happening from vblank irq vs. happening from drm_vblank_enable() or vblank_disable_fn(). 4. The radeon_flip_work_func will delay mmio programming a pageflip until the start of the real vblank iff it happens to execute inside the shifted earlier start of the vblank, so pageflips now also appear to execute at start of the shifted vblank, in sync with vblank counter and timestamp updates. This to avoid some races between updates of vblank count and timestamps that are used for swap scheduling and pageflip execution which could cause pageflips to execute before the scheduled target vblank. The lb_vblank_lead_lines "fudge" value is calculated as the size of the display controllers line buffer in scanlines for the given video mode: Vblank irq's are triggered by the line buffer logic when the line buffer refill for a video frame ends, ie. when the line buffer source read position enters the hw vblank. This means that a vblank irq could fire at most as many scanlines before the current reported scanout position of the crtc timing generator as the number of scanlines the line buffer can maximally hold for a given video mode. This patch has been successfully tested on a RV730 card with DCE-3 display engine and on a evergreen card with DCE-4 display engine, in single-display and dual-display configuration, with different video modes. A similar patch is needed for amdgpu-kms to fix the same problem. Limitations: - Maybe replace the udelay() in the flip_work_func() by a suitable usleep_range() for a bit better efficiency? Will try that. - Line buffer sizes in pixels are hard-coded on < DCE-4 to a value i just guessed to be high enough to work ok, lacking info on the true sizes atm. Probably fixes: fdo#93147 Port of Mario's radeon fix to amdgpu. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com> (v2) Refine amdgpu_flip_work_func() for better efficiency. In amdgpu_flip_work_func, replace the busy waiting udelay(5) with event lock held by a more performance and energy efficient usleep_range() until at least predicted true start of hw vblank, with some slack for scheduler happiness. Release the event lock during waits to not delay other outputs in doing their stuff, as the waiting can last up to 200 usecs in some cases. Also small fix to code comment and formatting in that function. (v2) Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> (v3) Fix crash in crtc disabled case
2015-12-03 17:31:56 +00:00
#define GET_DISTANCE_TO_VBLANKSTART (1 << 31)
void amdgpu_link_encoder_connector(struct drm_device *dev);
struct drm_connector *
amdgpu_get_connector_for_encoder(struct drm_encoder *encoder);
struct drm_connector *
amdgpu_get_connector_for_encoder_init(struct drm_encoder *encoder);
bool amdgpu_dig_monitor_is_duallink(struct drm_encoder *encoder,
u32 pixel_clock);
u16 amdgpu_encoder_get_dp_bridge_encoder_id(struct drm_encoder *encoder);
struct drm_encoder *amdgpu_get_external_encoder(struct drm_encoder *encoder);
bool amdgpu_ddc_probe(struct amdgpu_connector *amdgpu_connector, bool use_aux);
void amdgpu_encoder_set_active_device(struct drm_encoder *encoder);
int amdgpu_get_crtc_scanoutpos(struct drm_device *dev, unsigned int pipe,
unsigned int flags, int *vpos, int *hpos,
ktime_t *stime, ktime_t *etime,
const struct drm_display_mode *mode);
int amdgpu_framebuffer_init(struct drm_device *dev,
struct amdgpu_framebuffer *rfb,
const struct drm_mode_fb_cmd2 *mode_cmd,
struct drm_gem_object *obj);
int amdgpufb_remove(struct drm_device *dev, struct drm_framebuffer *fb);
void amdgpu_enc_destroy(struct drm_encoder *encoder);
void amdgpu_copy_fb(struct drm_device *dev, struct drm_gem_object *dst_obj);
bool amdgpu_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
void amdgpu_panel_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *adjusted_mode);
int amdgpu_crtc_idx_to_irq_type(struct amdgpu_device *adev, int crtc);
/* fbdev layer */
int amdgpu_fbdev_init(struct amdgpu_device *adev);
void amdgpu_fbdev_fini(struct amdgpu_device *adev);
void amdgpu_fbdev_set_suspend(struct amdgpu_device *adev, int state);
int amdgpu_fbdev_total_size(struct amdgpu_device *adev);
bool amdgpu_fbdev_robj_is_fb(struct amdgpu_device *adev, struct amdgpu_bo *robj);
void amdgpu_fbdev_restore_mode(struct amdgpu_device *adev);
void amdgpu_fb_output_poll_changed(struct amdgpu_device *adev);
int amdgpu_align_pitch(struct amdgpu_device *adev, int width, int bpp, bool tiled);
/* amdgpu_display.c */
void amdgpu_print_display_setup(struct drm_device *dev);
int amdgpu_modeset_create_props(struct amdgpu_device *adev);
int amdgpu_crtc_set_config(struct drm_mode_set *set);
int amdgpu_crtc_page_flip_target(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_pending_vblank_event *event,
uint32_t page_flip_flags, uint32_t target);
extern const struct drm_mode_config_funcs amdgpu_mode_funcs;
#endif