linux-stable/drivers/staging/rtl8723bs/hal/Hal8723BReg.h

444 lines
17 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
/*****************************************************************************
*Copyright(c) 2009, RealTEK Technology Inc. All Right Reserved.
*
* Module: __INC_HAL8723BREG_H
*
*
* Note: 1. Define Mac register address and corresponding bit mask map
*
*
* Export: Constants, macro, functions(API), global variables(None).
*
* Abbrev:
*
* History:
* Data Who Remark
*
*****************************************************************************/
#ifndef __INC_HAL8723BREG_H
#define __INC_HAL8723BREG_H
/* */
/* */
/* */
/* */
/* */
/* 0x0000h ~ 0x00FFh System Configuration */
/* */
/* */
#define REG_SYS_ISO_CTRL_8723B 0x0000 /* 2 Byte */
#define REG_SYS_FUNC_EN_8723B 0x0002 /* 2 Byte */
#define REG_APS_FSMCO_8723B 0x0004 /* 4 Byte */
#define REG_SYS_CLKR_8723B 0x0008 /* 2 Byte */
#define REG_9346CR_8723B 0x000A /* 2 Byte */
#define REG_EE_VPD_8723B 0x000C /* 2 Byte */
#define REG_AFE_MISC_8723B 0x0010 /* 1 Byte */
#define REG_SPS0_CTRL_8723B 0x0011 /* 7 Byte */
#define REG_SPS_OCP_CFG_8723B 0x0018 /* 4 Byte */
#define REG_RSV_CTRL_8723B 0x001C /* 3 Byte */
#define REG_RF_CTRL_8723B 0x001F /* 1 Byte */
#define REG_LPLDO_CTRL_8723B 0x0023 /* 1 Byte */
#define REG_AFE_XTAL_CTRL_8723B 0x0024 /* 4 Byte */
#define REG_AFE_PLL_CTRL_8723B 0x0028 /* 4 Byte */
#define REG_MAC_PLL_CTRL_EXT_8723B 0x002c /* 4 Byte */
#define REG_EFUSE_CTRL_8723B 0x0030
#define REG_EFUSE_TEST_8723B 0x0034
#define REG_PWR_DATA_8723B 0x0038
#define REG_CAL_TIMER_8723B 0x003C
#define REG_ACLK_MON_8723B 0x003E
#define REG_GPIO_MUXCFG_8723B 0x0040
#define REG_GPIO_IO_SEL_8723B 0x0042
#define REG_MAC_PINMUX_CFG_8723B 0x0043
#define REG_GPIO_PIN_CTRL_8723B 0x0044
#define REG_GPIO_INTM_8723B 0x0048
#define REG_LEDCFG0_8723B 0x004C
#define REG_LEDCFG1_8723B 0x004D
#define REG_LEDCFG2_8723B 0x004E
#define REG_LEDCFG3_8723B 0x004F
#define REG_FSIMR_8723B 0x0050
#define REG_FSISR_8723B 0x0054
#define REG_HSIMR_8723B 0x0058
#define REG_HSISR_8723B 0x005c
#define REG_GPIO_EXT_CTRL 0x0060
#define REG_MULTI_FUNC_CTRL_8723B 0x0068
#define REG_GPIO_STATUS_8723B 0x006C
#define REG_SDIO_CTRL_8723B 0x0070
#define REG_OPT_CTRL_8723B 0x0074
#define REG_AFE_XTAL_CTRL_EXT_8723B 0x0078
#define REG_MCUFWDL_8723B 0x0080
#define REG_BT_PATCH_STATUS_8723B 0x0088
#define REG_HIMR0_8723B 0x00B0
#define REG_HISR0_8723B 0x00B4
#define REG_HIMR1_8723B 0x00B8
#define REG_HISR1_8723B 0x00BC
#define REG_PMC_DBG_CTRL2_8723B 0x00CC
#define REG_EFUSE_BURN_GNT_8723B 0x00CF
#define REG_HPON_FSM_8723B 0x00EC
#define REG_SYS_CFG_8723B 0x00F0
#define REG_SYS_CFG1_8723B 0x00FC
#define REG_ROM_VERSION 0x00FD
/* */
/* */
/* 0x0100h ~ 0x01FFh MACTOP General Configuration */
/* */
/* */
#define REG_CR_8723B 0x0100
#define REG_PBP_8723B 0x0104
#define REG_PKT_BUFF_ACCESS_CTRL_8723B 0x0106
#define REG_TRXDMA_CTRL_8723B 0x010C
#define REG_TRXFF_BNDY_8723B 0x0114
#define REG_TRXFF_STATUS_8723B 0x0118
#define REG_RXFF_PTR_8723B 0x011C
#define REG_CPWM_8723B 0x012F
#define REG_FWIMR_8723B 0x0130
#define REG_FWISR_8723B 0x0134
#define REG_FTIMR_8723B 0x0138
#define REG_PKTBUF_DBG_CTRL_8723B 0x0140
#define REG_RXPKTBUF_CTRL_8723B 0x0142
#define REG_PKTBUF_DBG_DATA_L_8723B 0x0144
#define REG_PKTBUF_DBG_DATA_H_8723B 0x0148
#define REG_TC0_CTRL_8723B 0x0150
#define REG_TC1_CTRL_8723B 0x0154
#define REG_TC2_CTRL_8723B 0x0158
#define REG_TC3_CTRL_8723B 0x015C
#define REG_TC4_CTRL_8723B 0x0160
#define REG_TCUNIT_BASE_8723B 0x0164
#define REG_RSVD3_8723B 0x0168
#define REG_C2HEVT_MSG_NORMAL_8723B 0x01A0
#define REG_C2HEVT_CMD_SEQ_88XX 0x01A1
#define REG_C2hEVT_CMD_CONTENT_88XX 0x01A2
#define REG_C2HEVT_CMD_LEN_88XX 0x01AE
#define REG_C2HEVT_CLEAR_8723B 0x01AF
#define REG_MCUTST_1_8723B 0x01C0
#define REG_MCUTST_WOWLAN_8723B 0x01C7
#define REG_FMETHR_8723B 0x01C8
#define REG_HMETFR_8723B 0x01CC
#define REG_HMEBOX_0_8723B 0x01D0
#define REG_HMEBOX_1_8723B 0x01D4
#define REG_HMEBOX_2_8723B 0x01D8
#define REG_HMEBOX_3_8723B 0x01DC
#define REG_LLT_INIT_8723B 0x01E0
#define REG_HMEBOX_EXT0_8723B 0x01F0
#define REG_HMEBOX_EXT1_8723B 0x01F4
#define REG_HMEBOX_EXT2_8723B 0x01F8
#define REG_HMEBOX_EXT3_8723B 0x01FC
/* */
/* */
/* 0x0200h ~ 0x027Fh TXDMA Configuration */
/* */
/* */
#define REG_RQPN_8723B 0x0200
#define REG_FIFOPAGE_8723B 0x0204
#define REG_DWBCN0_CTRL_8723B REG_TDECTRL
#define REG_TXDMA_OFFSET_CHK_8723B 0x020C
#define REG_TXDMA_STATUS_8723B 0x0210
#define REG_RQPN_NPQ_8723B 0x0214
#define REG_DWBCN1_CTRL_8723B 0x0228
/* */
/* */
/* 0x0280h ~ 0x02FFh RXDMA Configuration */
/* */
/* */
#define REG_RXDMA_AGG_PG_TH_8723B 0x0280
#define REG_FW_UPD_RDPTR_8723B 0x0284 /* FW shall update this register before FW write RXPKT_RELEASE_POLL to 1 */
#define REG_RXDMA_CONTROL_8723B 0x0286 /* Control the RX DMA. */
#define REG_RXPKT_NUM_8723B 0x0287 /* The number of packets in RXPKTBUF. */
#define REG_RXDMA_STATUS_8723B 0x0288
#define REG_RXDMA_PRO_8723B 0x0290
#define REG_EARLY_MODE_CONTROL_8723B 0x02BC
#define REG_RSVD5_8723B 0x02F0
#define REG_RSVD6_8723B 0x02F4
/* */
/* */
/* 0x0300h ~ 0x03FFh PCIe */
/* */
/* */
#define REG_PCIE_CTRL_REG_8723B 0x0300
#define REG_INT_MIG_8723B 0x0304 /* Interrupt Migration */
#define REG_BCNQ_DESA_8723B 0x0308 /* TX Beacon Descriptor Address */
#define REG_HQ_DESA_8723B 0x0310 /* TX High Queue Descriptor Address */
#define REG_MGQ_DESA_8723B 0x0318 /* TX Manage Queue Descriptor Address */
#define REG_VOQ_DESA_8723B 0x0320 /* TX VO Queue Descriptor Address */
#define REG_VIQ_DESA_8723B 0x0328 /* TX VI Queue Descriptor Address */
#define REG_BEQ_DESA_8723B 0x0330 /* TX BE Queue Descriptor Address */
#define REG_BKQ_DESA_8723B 0x0338 /* TX BK Queue Descriptor Address */
#define REG_RX_DESA_8723B 0x0340 /* RX Queue Descriptor Address */
#define REG_DBI_WDATA_8723B 0x0348 /* DBI Write Data */
#define REG_DBI_RDATA_8723B 0x034C /* DBI Read Data */
#define REG_DBI_ADDR_8723B 0x0350 /* DBI Address */
#define REG_DBI_FLAG_8723B 0x0352 /* DBI Read/Write Flag */
#define REG_MDIO_WDATA_8723B 0x0354 /* MDIO for Write PCIE PHY */
#define REG_MDIO_RDATA_8723B 0x0356 /* MDIO for Reads PCIE PHY */
#define REG_MDIO_CTL_8723B 0x0358 /* MDIO for Control */
#define REG_DBG_SEL_8723B 0x0360 /* Debug Selection Register */
#define REG_PCIE_HRPWM_8723B 0x0361 /* PCIe RPWM */
#define REG_PCIE_HCPWM_8723B 0x0363 /* PCIe CPWM */
#define REG_PCIE_MULTIFET_CTRL_8723B 0x036A /* PCIE Multi-Fethc Control */
/* spec version 11 */
/* */
/* */
/* 0x0400h ~ 0x047Fh Protocol Configuration */
/* */
/* */
#define REG_VOQ_INFORMATION_8723B 0x0400
#define REG_VIQ_INFORMATION_8723B 0x0404
#define REG_BEQ_INFORMATION_8723B 0x0408
#define REG_BKQ_INFORMATION_8723B 0x040C
#define REG_MGQ_INFORMATION_8723B 0x0410
#define REG_HGQ_INFORMATION_8723B 0x0414
#define REG_BCNQ_INFORMATION_8723B 0x0418
#define REG_TXPKT_EMPTY_8723B 0x041A
#define REG_FWHW_TXQ_CTRL_8723B 0x0420
#define REG_HWSEQ_CTRL_8723B 0x0423
#define REG_TXPKTBUF_BCNQ_BDNY_8723B 0x0424
#define REG_TXPKTBUF_MGQ_BDNY_8723B 0x0425
#define REG_LIFECTRL_CTRL_8723B 0x0426
#define REG_MULTI_BCNQ_OFFSET_8723B 0x0427
#define REG_SPEC_SIFS_8723B 0x0428
#define REG_RL_8723B 0x042A
#define REG_TXBF_CTRL_8723B 0x042C
#define REG_DARFRC_8723B 0x0430
#define REG_RARFRC_8723B 0x0438
#define REG_RRSR_8723B 0x0440
#define REG_ARFR0_8723B 0x0444
#define REG_ARFR1_8723B 0x044C
#define REG_CCK_CHECK_8723B 0x0454
#define REG_AMPDU_MAX_TIME_8723B 0x0456
#define REG_TXPKTBUF_BCNQ_BDNY1_8723B 0x0457
#define REG_AMPDU_MAX_LENGTH_8723B 0x0458
#define REG_TXPKTBUF_WMAC_LBK_BF_HD_8723B 0x045D
#define REG_NDPA_OPT_CTRL_8723B 0x045F
#define REG_FAST_EDCA_CTRL_8723B 0x0460
#define REG_RD_RESP_PKT_TH_8723B 0x0463
#define REG_DATA_SC_8723B 0x0483
#define REG_TXRPT_START_OFFSET 0x04AC
#define REG_POWER_STAGE1_8723B 0x04B4
#define REG_POWER_STAGE2_8723B 0x04B8
#define REG_AMPDU_BURST_MODE_8723B 0x04BC
#define REG_PKT_VO_VI_LIFE_TIME_8723B 0x04C0
#define REG_PKT_BE_BK_LIFE_TIME_8723B 0x04C2
#define REG_STBC_SETTING_8723B 0x04C4
#define REG_HT_SINGLE_AMPDU_8723B 0x04C7
#define REG_PROT_MODE_CTRL_8723B 0x04C8
#define REG_MAX_AGGR_NUM_8723B 0x04CA
#define REG_RTS_MAX_AGGR_NUM_8723B 0x04CB
#define REG_BAR_MODE_CTRL_8723B 0x04CC
#define REG_RA_TRY_RATE_AGG_LMT_8723B 0x04CF
#define REG_MACID_PKT_DROP0_8723B 0x04D0
#define REG_MACID_PKT_SLEEP_8723B 0x04D4
/* */
/* */
/* 0x0500h ~ 0x05FFh EDCA Configuration */
/* */
/* */
#define REG_EDCA_VO_PARAM_8723B 0x0500
#define REG_EDCA_VI_PARAM_8723B 0x0504
#define REG_EDCA_BE_PARAM_8723B 0x0508
#define REG_EDCA_BK_PARAM_8723B 0x050C
#define REG_BCNTCFG_8723B 0x0510
#define REG_PIFS_8723B 0x0512
#define REG_RDG_PIFS_8723B 0x0513
#define REG_SIFS_CTX_8723B 0x0514
#define REG_SIFS_TRX_8723B 0x0516
#define REG_AGGR_BREAK_TIME_8723B 0x051A
#define REG_SLOT_8723B 0x051B
#define REG_TX_PTCL_CTRL_8723B 0x0520
#define REG_TXPAUSE_8723B 0x0522
#define REG_DIS_TXREQ_CLR_8723B 0x0523
#define REG_RD_CTRL_8723B 0x0524
/* */
/* Format for offset 540h-542h: */
/* [3:0]: TBTT prohibit setup in unit of 32us. The time for HW getting beacon content before TBTT. */
/* [7:4]: Reserved. */
/* [19:8]: TBTT prohibit hold in unit of 32us. The time for HW holding to send the beacon packet. */
/* [23:20]: Reserved */
/* Description: */
/* | */
/* |<--Setup--|--Hold------------>| */
/* --------------|---------------------- */
/* | */
/* TBTT */
/* Note: We cannot update beacon content to HW or send any AC packets during the time between Setup and Hold. */
/* Described by Designer Tim and Bruce, 2011-01-14. */
/* */
#define REG_TBTT_PROHIBIT_8723B 0x0540
#define REG_RD_NAV_NXT_8723B 0x0544
#define REG_NAV_PROT_LEN_8723B 0x0546
#define REG_BCN_CTRL_8723B 0x0550
#define REG_BCN_CTRL_1_8723B 0x0551
#define REG_MBID_NUM_8723B 0x0552
#define REG_DUAL_TSF_RST_8723B 0x0553
#define REG_BCN_INTERVAL_8723B 0x0554
#define REG_DRVERLYINT_8723B 0x0558
#define REG_BCNDMATIM_8723B 0x0559
#define REG_ATIMWND_8723B 0x055A
#define REG_USTIME_TSF_8723B 0x055C
#define REG_BCN_MAX_ERR_8723B 0x055D
#define REG_RXTSF_OFFSET_CCK_8723B 0x055E
#define REG_RXTSF_OFFSET_OFDM_8723B 0x055F
#define REG_TSFTR_8723B 0x0560
#define REG_CTWND_8723B 0x0572
#define REG_SECONDARY_CCA_CTRL_8723B 0x0577
#define REG_PSTIMER_8723B 0x0580
#define REG_TIMER0_8723B 0x0584
#define REG_TIMER1_8723B 0x0588
#define REG_ACMHWCTRL_8723B 0x05C0
#define REG_SCH_TXCMD_8723B 0x05F8
/* 0x0600h ~ 0x07FFh WMAC Configuration */
#define REG_MAC_CR_8723B 0x0600
#define REG_TCR_8723B 0x0604
#define REG_RCR_8723B 0x0608
#define REG_RX_PKT_LIMIT_8723B 0x060C
#define REG_RX_DLK_TIME_8723B 0x060D
#define REG_RX_DRVINFO_SZ_8723B 0x060F
#define REG_MACID_8723B 0x0610
#define REG_BSSID_8723B 0x0618
#define REG_MAR_8723B 0x0620
#define REG_MBIDCAMCFG_8723B 0x0628
#define REG_USTIME_EDCA_8723B 0x0638
#define REG_MAC_SPEC_SIFS_8723B 0x063A
#define REG_RESP_SIFP_CCK_8723B 0x063C
#define REG_RESP_SIFS_OFDM_8723B 0x063E
#define REG_ACKTO_8723B 0x0640
#define REG_CTS2TO_8723B 0x0641
#define REG_EIFS_8723B 0x0642
#define REG_NAV_UPPER_8723B 0x0652 /* unit of 128 */
#define REG_TRXPTCL_CTL_8723B 0x0668
/* Security */
#define REG_CAMCMD_8723B 0x0670
#define REG_CAMWRITE_8723B 0x0674
#define REG_CAMREAD_8723B 0x0678
#define REG_CAMDBG_8723B 0x067C
#define REG_SECCFG_8723B 0x0680
/* Power */
#define REG_WOW_CTRL_8723B 0x0690
#define REG_PS_RX_INFO_8723B 0x0692
#define REG_UAPSD_TID_8723B 0x0693
#define REG_WKFMCAM_CMD_8723B 0x0698
#define REG_WKFMCAM_NUM_8723B 0x0698
#define REG_WKFMCAM_RWD_8723B 0x069C
#define REG_RXFLTMAP0_8723B 0x06A0
#define REG_RXFLTMAP1_8723B 0x06A2
#define REG_RXFLTMAP2_8723B 0x06A4
#define REG_BCN_PSR_RPT_8723B 0x06A8
#define REG_BT_COEX_TABLE_8723B 0x06C0
#define REG_BFMER0_INFO_8723B 0x06E4
#define REG_BFMER1_INFO_8723B 0x06EC
#define REG_CSI_RPT_PARAM_BW20_8723B 0x06F4
#define REG_CSI_RPT_PARAM_BW40_8723B 0x06F8
#define REG_CSI_RPT_PARAM_BW80_8723B 0x06FC
/* Hardware Port 2 */
#define REG_MACID1_8723B 0x0700
#define REG_BSSID1_8723B 0x0708
#define REG_BFMEE_SEL_8723B 0x0714
#define REG_SND_PTCL_CTRL_8723B 0x0718
/* Redifine 8192C register definition for compatibility */
/* TODO: use these definition when using REG_xxx naming rule. */
/* NOTE: DO NOT Remove these definition. Use later. */
#define EFUSE_CTRL_8723B REG_EFUSE_CTRL_8723B /* E-Fuse Control. */
#define EFUSE_TEST_8723B REG_EFUSE_TEST_8723B /* E-Fuse Test. */
#define MSR_8723B (REG_CR_8723B + 2) /* Media Status register */
#define ISR_8723B REG_HISR0_8723B
#define TSFR_8723B REG_TSFTR_8723B /* Timing Sync Function Timer Register. */
#define PBP_8723B REG_PBP_8723B
/* Redifine MACID register, to compatible prior ICs. */
#define IDR0_8723B REG_MACID_8723B /* MAC ID Register, Offset 0x0050-0x0053 */
#define IDR4_8723B (REG_MACID_8723B + 4) /* MAC ID Register, Offset 0x0054-0x0055 */
/* 9. Security Control Registers (Offset:) */
#define RWCAM_8723B REG_CAMCMD_8723B /* IN 8190 Data Sheet is called CAMcmd */
#define WCAMI_8723B REG_CAMWRITE_8723B /* Software write CAM input content */
#define RCAMO_8723B REG_CAMREAD_8723B /* Software read/write CAM config */
#define CAMDBG_8723B REG_CAMDBG_8723B
#define SECR_8723B REG_SECCFG_8723B /* Security Configuration Register */
/* 8195 IMR/ISR bits (offset 0xB0, 8bits) */
#define IMR_DISABLED_8723B 0
/* IMR DW0(0x00B0-00B3) Bit 0-31 */
#define IMR_TIMER2_8723B BIT31 /* Timeout interrupt 2 */
#define IMR_TIMER1_8723B BIT30 /* Timeout interrupt 1 */
#define IMR_PSTIMEOUT_8723B BIT29 /* Power Save Time Out Interrupt */
#define IMR_GTINT4_8723B BIT28 /* When GTIMER4 expires, this bit is set to 1 */
#define IMR_GTINT3_8723B BIT27 /* When GTIMER3 expires, this bit is set to 1 */
#define IMR_TXBCN0ERR_8723B BIT26 /* Transmit Beacon0 Error */
#define IMR_TXBCN0OK_8723B BIT25 /* Transmit Beacon0 OK */
#define IMR_TSF_BIT32_TOGGLE_8723B BIT24 /* TSF Timer BIT32 toggle indication interrupt */
#define IMR_BCNDMAINT0_8723B BIT20 /* Beacon DMA Interrupt 0 */
#define IMR_BCNDERR0_8723B BIT16 /* Beacon Queue DMA OK0 */
#define IMR_HSISR_IND_ON_INT_8723B BIT15 /* HSISR Indicator (HSIMR & HSISR is true, this bit is set to 1) */
#define IMR_BCNDMAINT_E_8723B BIT14 /* Beacon DMA Interrupt Extension for Win7 */
#define IMR_ATIMEND_8723B BIT12 /* CTWidnow End or ATIM Window End */
#define IMR_C2HCMD_8723B BIT10 /* CPU to Host Command INT Status, Write 1 clear */
#define IMR_CPWM2_8723B BIT9 /* CPU power Mode exchange INT Status, Write 1 clear */
#define IMR_CPWM_8723B BIT8 /* CPU power Mode exchange INT Status, Write 1 clear */
#define IMR_HIGHDOK_8723B BIT7 /* High Queue DMA OK */
#define IMR_MGNTDOK_8723B BIT6 /* Management Queue DMA OK */
#define IMR_BKDOK_8723B BIT5 /* AC_BK DMA OK */
#define IMR_BEDOK_8723B BIT4 /* AC_BE DMA OK */
#define IMR_VIDOK_8723B BIT3 /* AC_VI DMA OK */
#define IMR_VODOK_8723B BIT2 /* AC_VO DMA OK */
#define IMR_RDU_8723B BIT1 /* Rx Descriptor Unavailable */
#define IMR_ROK_8723B BIT0 /* Receive DMA OK */
/* IMR DW1(0x00B4-00B7) Bit 0-31 */
#define IMR_BCNDMAINT7_8723B BIT27 /* Beacon DMA Interrupt 7 */
#define IMR_BCNDMAINT6_8723B BIT26 /* Beacon DMA Interrupt 6 */
#define IMR_BCNDMAINT5_8723B BIT25 /* Beacon DMA Interrupt 5 */
#define IMR_BCNDMAINT4_8723B BIT24 /* Beacon DMA Interrupt 4 */
#define IMR_BCNDMAINT3_8723B BIT23 /* Beacon DMA Interrupt 3 */
#define IMR_BCNDMAINT2_8723B BIT22 /* Beacon DMA Interrupt 2 */
#define IMR_BCNDMAINT1_8723B BIT21 /* Beacon DMA Interrupt 1 */
#define IMR_BCNDOK7_8723B BIT20 /* Beacon Queue DMA OK Interrup 7 */
#define IMR_BCNDOK6_8723B BIT19 /* Beacon Queue DMA OK Interrup 6 */
#define IMR_BCNDOK5_8723B BIT18 /* Beacon Queue DMA OK Interrup 5 */
#define IMR_BCNDOK4_8723B BIT17 /* Beacon Queue DMA OK Interrup 4 */
#define IMR_BCNDOK3_8723B BIT16 /* Beacon Queue DMA OK Interrup 3 */
#define IMR_BCNDOK2_8723B BIT15 /* Beacon Queue DMA OK Interrup 2 */
#define IMR_BCNDOK1_8723B BIT14 /* Beacon Queue DMA OK Interrup 1 */
#define IMR_ATIMEND_E_8723B BIT13 /* ATIM Window End Extension for Win7 */
#define IMR_TXERR_8723B BIT11 /* Tx Error Flag Interrupt Status, write 1 clear. */
#define IMR_RXERR_8723B BIT10 /* Rx Error Flag INT Status, Write 1 clear */
#define IMR_TXFOVW_8723B BIT9 /* Transmit FIFO Overflow */
#define IMR_RXFOVW_8723B BIT8 /* Receive FIFO Overflow */
/* 2 ACMHWCTRL 0x05C0 */
#define AcmHw_HwEn_8723B BIT(0)
#define AcmHw_VoqEn_8723B BIT(1)
#define AcmHw_ViqEn_8723B BIT(2)
#define AcmHw_BeqEn_8723B BIT(3)
#define AcmHw_VoqStatus_8723B BIT(5)
#define AcmHw_ViqStatus_8723B BIT(6)
#define AcmHw_BeqStatus_8723B BIT(7)
/* 8195 (RCR) Receive Configuration Register (Offset 0x608, 32 bits) */
#define RCR_TCPOFLD_EN BIT25 /* Enable TCP checksum offload */
#endif /* #ifndef __INC_HAL8723BREG_H */