linux-stable/drivers/hid/hid-ite.c

140 lines
4.1 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* HID driver for some ITE "special" devices
* Copyright (c) 2017 Hans de Goede <hdegoede@redhat.com>
*/
#include <linux/device.h>
#include <linux/input.h>
#include <linux/hid.h>
#include <linux/module.h>
#include "hid-ids.h"
#define QUIRK_TOUCHPAD_ON_OFF_REPORT BIT(0)
static __u8 *ite_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize)
{
unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
if (quirks & QUIRK_TOUCHPAD_ON_OFF_REPORT) {
/* For Acer Aspire Switch 10 SW5-012 keyboard-dock */
if (*rsize == 188 && rdesc[162] == 0x81 && rdesc[163] == 0x02) {
hid_info(hdev, "Fixing up Acer Sw5-012 ITE keyboard report descriptor\n");
rdesc[163] = HID_MAIN_ITEM_RELATIVE;
}
HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E The Acer Aspire Switch 10E (SW3-016)'s keyboard-dock uses the same USB-ids as the Acer One S1003 keyboard-dock. Yet they are not entirely the same: 1. The S1003 keyboard-dock has the same report descriptors as the S1002 keyboard-dock (which has different USB-ids) 2. The Acer Aspire Switch 10E's keyboard-dock has different report descriptors from the S1002/S1003 keyboard docks and it sends 0x00880078 / 0x00880079 usage events when the touchpad is toggled on/off (which is handled internally). This means that all Acer kbd-docks handled by the hid-ite.c drivers report their touchpad being toggled on/off through these custom usage-codes with the exception of the S1003 dock, which likely is a bug of that dock. Add a QUIRK_TOUCHPAD_ON_OFF_REPORT quirk for the Aspire Switch 10E / S1003 usb-id so that the touchpad toggling will get reported to userspace on the Aspire Switch 10E. Since the Aspire Switch 10E's kbd-dock has different report-descriptors, this also requires adding support for fixing those to ite_report_fixup(). Setting the quirk will also cause ite_report_fixup() to hit the S1002/S1003 descriptors path on the S1003. Since the S1003 kbd-dock never generates any input-reports for the fixed up part of the descriptors this does not matter; and if there are versions out there which do actually send input-reports for the touchpad-toggle then the fixup should actually help to make things work. This was tested on both an Acer Aspire Switch 10E and on an Acer One S1003. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-02-06 20:53:27 +00:00
/* For Acer One S1002/S1003 keyboard-dock */
if (*rsize == 188 && rdesc[185] == 0x81 && rdesc[186] == 0x02) {
HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E The Acer Aspire Switch 10E (SW3-016)'s keyboard-dock uses the same USB-ids as the Acer One S1003 keyboard-dock. Yet they are not entirely the same: 1. The S1003 keyboard-dock has the same report descriptors as the S1002 keyboard-dock (which has different USB-ids) 2. The Acer Aspire Switch 10E's keyboard-dock has different report descriptors from the S1002/S1003 keyboard docks and it sends 0x00880078 / 0x00880079 usage events when the touchpad is toggled on/off (which is handled internally). This means that all Acer kbd-docks handled by the hid-ite.c drivers report their touchpad being toggled on/off through these custom usage-codes with the exception of the S1003 dock, which likely is a bug of that dock. Add a QUIRK_TOUCHPAD_ON_OFF_REPORT quirk for the Aspire Switch 10E / S1003 usb-id so that the touchpad toggling will get reported to userspace on the Aspire Switch 10E. Since the Aspire Switch 10E's kbd-dock has different report-descriptors, this also requires adding support for fixing those to ite_report_fixup(). Setting the quirk will also cause ite_report_fixup() to hit the S1002/S1003 descriptors path on the S1003. Since the S1003 kbd-dock never generates any input-reports for the fixed up part of the descriptors this does not matter; and if there are versions out there which do actually send input-reports for the touchpad-toggle then the fixup should actually help to make things work. This was tested on both an Acer Aspire Switch 10E and on an Acer One S1003. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-02-06 20:53:27 +00:00
hid_info(hdev, "Fixing up Acer S1002/S1003 ITE keyboard report descriptor\n");
rdesc[186] = HID_MAIN_ITEM_RELATIVE;
}
HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E The Acer Aspire Switch 10E (SW3-016)'s keyboard-dock uses the same USB-ids as the Acer One S1003 keyboard-dock. Yet they are not entirely the same: 1. The S1003 keyboard-dock has the same report descriptors as the S1002 keyboard-dock (which has different USB-ids) 2. The Acer Aspire Switch 10E's keyboard-dock has different report descriptors from the S1002/S1003 keyboard docks and it sends 0x00880078 / 0x00880079 usage events when the touchpad is toggled on/off (which is handled internally). This means that all Acer kbd-docks handled by the hid-ite.c drivers report their touchpad being toggled on/off through these custom usage-codes with the exception of the S1003 dock, which likely is a bug of that dock. Add a QUIRK_TOUCHPAD_ON_OFF_REPORT quirk for the Aspire Switch 10E / S1003 usb-id so that the touchpad toggling will get reported to userspace on the Aspire Switch 10E. Since the Aspire Switch 10E's kbd-dock has different report-descriptors, this also requires adding support for fixing those to ite_report_fixup(). Setting the quirk will also cause ite_report_fixup() to hit the S1002/S1003 descriptors path on the S1003. Since the S1003 kbd-dock never generates any input-reports for the fixed up part of the descriptors this does not matter; and if there are versions out there which do actually send input-reports for the touchpad-toggle then the fixup should actually help to make things work. This was tested on both an Acer Aspire Switch 10E and on an Acer One S1003. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-02-06 20:53:27 +00:00
/* For Acer Aspire Switch 10E (SW3-016) keyboard-dock */
if (*rsize == 210 && rdesc[184] == 0x81 && rdesc[185] == 0x02) {
hid_info(hdev, "Fixing up Acer Aspire Switch 10E (SW3-016) ITE keyboard report descriptor\n");
rdesc[185] = HID_MAIN_ITEM_RELATIVE;
}
}
return rdesc;
}
static int ite_input_mapping(struct hid_device *hdev,
struct hid_input *hi, struct hid_field *field,
struct hid_usage *usage, unsigned long **bit,
int *max)
{
unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
if ((quirks & QUIRK_TOUCHPAD_ON_OFF_REPORT) &&
(usage->hid & HID_USAGE_PAGE) == 0x00880000) {
if (usage->hid == 0x00880078) {
/* Touchpad on, userspace expects F22 for this */
hid_map_usage_clear(hi, usage, bit, max, EV_KEY, KEY_F22);
return 1;
}
if (usage->hid == 0x00880079) {
/* Touchpad off, userspace expects F23 for this */
hid_map_usage_clear(hi, usage, bit, max, EV_KEY, KEY_F23);
return 1;
}
return -1;
}
return 0;
}
static int ite_event(struct hid_device *hdev, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
struct input_dev *input;
if (!(hdev->claimed & HID_CLAIMED_INPUT) || !field->hidinput)
return 0;
input = field->hidinput->input;
/*
* The ITE8595 always reports 0 as value for the rfkill button. Luckily
* it is the only button in its report, and it sends a report on
* release only, so receiving a report means the button was pressed.
*/
if (usage->hid == HID_GD_RFKILL_BTN) {
input_event(input, EV_KEY, KEY_RFKILL, 1);
input_sync(input);
input_event(input, EV_KEY, KEY_RFKILL, 0);
input_sync(input);
return 1;
}
return 0;
}
static int ite_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret;
hid_set_drvdata(hdev, (void *)id->driver_data);
ret = hid_open_report(hdev);
if (ret)
return ret;
return hid_hw_start(hdev, HID_CONNECT_DEFAULT);
}
static const struct hid_device_id ite_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ITE, USB_DEVICE_ID_ITE8595) },
{ HID_USB_DEVICE(USB_VENDOR_ID_258A, USB_DEVICE_ID_258A_6A88) },
/* ITE8595 USB kbd ctlr, with Synaptics touchpad connected to it. */
HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dock Commit 8f18eca9ebc5 ("HID: ite: Add USB id match for Acer SW5-012 keyboard dock") added the USB id for the Acer SW5-012's keyboard dock to the hid-ite driver to fix the rfkill driver not working. Most keyboard docks with an ITE 8595 keyboard/touchpad controller have the "Wireless Radio Control" bits which need the special hid-ite driver on the second USB interface (the mouse interface) and their touchpad only supports mouse emulation, so using generic hid-input handling for anything but the "Wireless Radio Control" bits is fine. On these devices we simply bind to all USB interfaces. But unlike other ITE8595 using keyboard docks, the Acer Aspire Switch 10 (SW5-012)'s touchpad not only does mouse emulation it also supports HID-multitouch and all the keys including the "Wireless Radio Control" bits have been moved to the first USB interface (the keyboard intf). So we need hid-ite to handle the first (keyboard) USB interface and have it NOT bind to the second (mouse) USB interface so that that can be handled by hid-multitouch.c and we get proper multi-touch support. This commit changes the hid_device_id for the SW5-012 keyboard dock to only match on hid devices from the HID_GROUP_GENERIC group, this way hid-ite will not bind the the mouse/multi-touch interface which has HID_GROUP_MULTITOUCH_WIN_8 as group. This fixes the regression to mouse-emulation mode introduced by adding the keyboard dock USB id. Cc: stable@vger.kernel.org Fixes: 8f18eca9ebc5 ("HID: ite: Add USB id match for Acer SW5-012 keyboard dock") Reported-by: Zdeněk Rampas <zdenda.rampas@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-02-01 11:56:48 +00:00
{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
USB_VENDOR_ID_SYNAPTICS,
USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5_012),
.driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT },
/* ITE8910 USB kbd ctlr, with Synaptics touchpad connected to it. */
{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
USB_VENDOR_ID_SYNAPTICS,
USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1002),
.driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT },
/* ITE8910 USB kbd ctlr, with Synaptics touchpad connected to it. */
{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
USB_VENDOR_ID_SYNAPTICS,
HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E The Acer Aspire Switch 10E (SW3-016)'s keyboard-dock uses the same USB-ids as the Acer One S1003 keyboard-dock. Yet they are not entirely the same: 1. The S1003 keyboard-dock has the same report descriptors as the S1002 keyboard-dock (which has different USB-ids) 2. The Acer Aspire Switch 10E's keyboard-dock has different report descriptors from the S1002/S1003 keyboard docks and it sends 0x00880078 / 0x00880079 usage events when the touchpad is toggled on/off (which is handled internally). This means that all Acer kbd-docks handled by the hid-ite.c drivers report their touchpad being toggled on/off through these custom usage-codes with the exception of the S1003 dock, which likely is a bug of that dock. Add a QUIRK_TOUCHPAD_ON_OFF_REPORT quirk for the Aspire Switch 10E / S1003 usb-id so that the touchpad toggling will get reported to userspace on the Aspire Switch 10E. Since the Aspire Switch 10E's kbd-dock has different report-descriptors, this also requires adding support for fixing those to ite_report_fixup(). Setting the quirk will also cause ite_report_fixup() to hit the S1002/S1003 descriptors path on the S1003. Since the S1003 kbd-dock never generates any input-reports for the fixed up part of the descriptors this does not matter; and if there are versions out there which do actually send input-reports for the touchpad-toggle then the fixup should actually help to make things work. This was tested on both an Acer Aspire Switch 10E and on an Acer One S1003. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-02-06 20:53:27 +00:00
USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1003),
.driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT },
{ }
};
MODULE_DEVICE_TABLE(hid, ite_devices);
static struct hid_driver ite_driver = {
.name = "itetech",
.id_table = ite_devices,
.probe = ite_probe,
.report_fixup = ite_report_fixup,
.input_mapping = ite_input_mapping,
.event = ite_event,
};
module_hid_driver(ite_driver);
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
MODULE_LICENSE("GPL");