linux-stable/arch/x86/kernel/kvm.c

1155 lines
28 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* KVM paravirt_ops implementation
*
* Copyright (C) 2007, Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
* Copyright IBM Corporation, 2007
* Authors: Anthony Liguori <aliguori@us.ibm.com>
*/
#define pr_fmt(fmt) "kvm-guest: " fmt
#include <linux/context_tracking.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/kvm_para.h>
#include <linux/cpu.h>
#include <linux/mm.h>
#include <linux/highmem.h>
#include <linux/hardirq.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/hash.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/kprobes.h>
#include <linux/nmi.h>
#include <linux/swait.h>
#include <linux/syscore_ops.h>
#include <linux/cc_platform.h>
#include <linux/efi.h>
#include <asm/timer.h>
#include <asm/cpu.h>
#include <asm/traps.h>
#include <asm/desc.h>
#include <asm/tlbflush.h>
KVM guest: guest side for eoi avoidance The idea is simple: there's a bit, per APIC, in guest memory, that tells the guest that it does not need EOI. Guest tests it using a single est and clear operation - this is necessary so that host can detect interrupt nesting - and if set, it can skip the EOI MSR. I run a simple microbenchmark to show exit reduction (note: for testing, need to apply follow-up patch 'kvm: host side for eoi optimization' + a qemu patch I posted separately, on host): Before: Performance counter stats for 'sleep 1s': 47,357 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 5,001 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 22,124 kvm:kvm_apic [99.98%] 49,849 kvm:kvm_exit [99.98%] 21,115 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 22,937 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.98%] 22,207 kvm:kvm_apic_accept_irq [99.98%] 22,421 kvm:kvm_eoi [99.98%] 0 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 57 kvm:kvm_emulate_insn [99.99%] 0 kvm:vcpu_match_mmio [99.99%] 0 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 23,609 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [99.99%] 226 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002100578 seconds time elapsed After: Performance counter stats for 'sleep 1s': 28,354 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 1,347 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 1,931 kvm:kvm_apic [99.98%] 29,595 kvm:kvm_exit [99.98%] 24,884 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 1,986 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.99%] 25,953 kvm:kvm_apic_accept_irq [99.99%] 26,132 kvm:kvm_eoi [99.99%] 26,593 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 284 kvm:kvm_emulate_insn [99.99%] 68 kvm:vcpu_match_mmio [99.99%] 68 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 28,288 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [100.00%] 588 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002039622 seconds time elapsed We see that # of exits is almost halved. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-24 16:24:34 +00:00
#include <asm/apic.h>
#include <asm/apicdef.h>
#include <asm/hypervisor.h>
#include <asm/tlb.h>
#include <asm/cpuidle_haltpoll.h>
#include <asm/ptrace.h>
#include <asm/reboot.h>
#include <asm/svm.h>
#include <asm/e820/api.h>
DEFINE_STATIC_KEY_FALSE(kvm_async_pf_enabled);
static int kvmapf = 1;
static int __init parse_no_kvmapf(char *arg)
{
kvmapf = 0;
return 0;
}
early_param("no-kvmapf", parse_no_kvmapf);
static int steal_acc = 1;
static int __init parse_no_stealacc(char *arg)
{
steal_acc = 0;
return 0;
}
early_param("no-steal-acc", parse_no_stealacc);
static DEFINE_PER_CPU_DECRYPTED(struct kvm_vcpu_pv_apf_data, apf_reason) __aligned(64);
DEFINE_PER_CPU_DECRYPTED(struct kvm_steal_time, steal_time) __aligned(64) __visible;
static int has_steal_clock = 0;
static int has_guest_poll = 0;
/*
* No need for any "IO delay" on KVM
*/
static void kvm_io_delay(void)
{
}
#define KVM_TASK_SLEEP_HASHBITS 8
#define KVM_TASK_SLEEP_HASHSIZE (1<<KVM_TASK_SLEEP_HASHBITS)
struct kvm_task_sleep_node {
struct hlist_node link;
struct swait_queue_head wq;
u32 token;
int cpu;
};
static struct kvm_task_sleep_head {
raw_spinlock_t lock;
struct hlist_head list;
} async_pf_sleepers[KVM_TASK_SLEEP_HASHSIZE];
static struct kvm_task_sleep_node *_find_apf_task(struct kvm_task_sleep_head *b,
u32 token)
{
struct hlist_node *p;
hlist_for_each(p, &b->list) {
struct kvm_task_sleep_node *n =
hlist_entry(p, typeof(*n), link);
if (n->token == token)
return n;
}
return NULL;
}
static bool kvm_async_pf_queue_task(u32 token, struct kvm_task_sleep_node *n)
{
u32 key = hash_32(token, KVM_TASK_SLEEP_HASHBITS);
struct kvm_task_sleep_head *b = &async_pf_sleepers[key];
x86/kvm: Sanitize kvm_async_pf_task_wait() While working on the entry consolidation I stumbled over the KVM async page fault handler and kvm_async_pf_task_wait() in particular. It took me a while to realize that the randomly sprinkled around rcu_irq_enter()/exit() invocations are just cargo cult programming. Several patches "fixed" RCU splats by curing the symptoms without noticing that the code is flawed from a design perspective. The main problem is that this async injection is not based on a proper handshake mechanism and only respects the minimal requirement, i.e. the guest is not in a state where it has interrupts disabled. Aside of that the actual code is a convoluted one fits it all swiss army knife. It is invoked from different places with different RCU constraints: 1) Host side: vcpu_enter_guest() kvm_x86_ops->handle_exit() kvm_handle_page_fault() kvm_async_pf_task_wait() The invocation happens from fully preemptible context. 2) Guest side: The async page fault interrupted: a) user space b) preemptible kernel code which is not in a RCU read side critical section c) non-preemtible kernel code or a RCU read side critical section or kernel code with CONFIG_PREEMPTION=n which allows not to differentiate between #2b and #2c. RCU is watching for: #1 The vCPU exited and current is definitely not the idle task #2a The #PF entry code on the guest went through enter_from_user_mode() which reactivates RCU #2b There is no preemptible, interrupts enabled code in the kernel which can run with RCU looking away. (The idle task is always non preemptible). I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU voodoo at all. In #2c RCU is eventually not watching, but as that state cannot schedule anyway there is no point to worry about it so it has to invoke rcu_irq_enter() before running that code. This can be optimized, but this will be done as an extra step in course of the entry code consolidation work. So the proper solution for this is to: - Split kvm_async_pf_task_wait() into schedule and halt based waiting interfaces which share the enqueueing code. - Add comments (condensed form of this changelog) to spare others the time waste and pain of reverse engineering all of this with the help of uncomprehensible changelogs and code history. - Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(), user mode and schedulable kernel side async page faults (#1, #2a, #2b) - Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel case (#2c). For this case also remove the rcu_irq_exit()/enter() pair around the halt as it is just a pointless exercise: - vCPUs can VMEXIT at any random point and can be scheduled out for an arbitrary amount of time by the host and this is not any different except that it voluntary triggers the exit via halt. - The interrupted context could have RCU watching already. So the rcu_irq_exit() before the halt is not gaining anything aside of confusing the reader. Claiming that this might prevent RCU stalls is just an illusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
2020-03-06 23:42:06 +00:00
struct kvm_task_sleep_node *e;
raw_spin_lock(&b->lock);
e = _find_apf_task(b, token);
if (e) {
/* dummy entry exist -> wake up was delivered ahead of PF */
hlist_del(&e->link);
raw_spin_unlock(&b->lock);
x86/kvm: Sanitize kvm_async_pf_task_wait() While working on the entry consolidation I stumbled over the KVM async page fault handler and kvm_async_pf_task_wait() in particular. It took me a while to realize that the randomly sprinkled around rcu_irq_enter()/exit() invocations are just cargo cult programming. Several patches "fixed" RCU splats by curing the symptoms without noticing that the code is flawed from a design perspective. The main problem is that this async injection is not based on a proper handshake mechanism and only respects the minimal requirement, i.e. the guest is not in a state where it has interrupts disabled. Aside of that the actual code is a convoluted one fits it all swiss army knife. It is invoked from different places with different RCU constraints: 1) Host side: vcpu_enter_guest() kvm_x86_ops->handle_exit() kvm_handle_page_fault() kvm_async_pf_task_wait() The invocation happens from fully preemptible context. 2) Guest side: The async page fault interrupted: a) user space b) preemptible kernel code which is not in a RCU read side critical section c) non-preemtible kernel code or a RCU read side critical section or kernel code with CONFIG_PREEMPTION=n which allows not to differentiate between #2b and #2c. RCU is watching for: #1 The vCPU exited and current is definitely not the idle task #2a The #PF entry code on the guest went through enter_from_user_mode() which reactivates RCU #2b There is no preemptible, interrupts enabled code in the kernel which can run with RCU looking away. (The idle task is always non preemptible). I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU voodoo at all. In #2c RCU is eventually not watching, but as that state cannot schedule anyway there is no point to worry about it so it has to invoke rcu_irq_enter() before running that code. This can be optimized, but this will be done as an extra step in course of the entry code consolidation work. So the proper solution for this is to: - Split kvm_async_pf_task_wait() into schedule and halt based waiting interfaces which share the enqueueing code. - Add comments (condensed form of this changelog) to spare others the time waste and pain of reverse engineering all of this with the help of uncomprehensible changelogs and code history. - Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(), user mode and schedulable kernel side async page faults (#1, #2a, #2b) - Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel case (#2c). For this case also remove the rcu_irq_exit()/enter() pair around the halt as it is just a pointless exercise: - vCPUs can VMEXIT at any random point and can be scheduled out for an arbitrary amount of time by the host and this is not any different except that it voluntary triggers the exit via halt. - The interrupted context could have RCU watching already. So the rcu_irq_exit() before the halt is not gaining anything aside of confusing the reader. Claiming that this might prevent RCU stalls is just an illusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
2020-03-06 23:42:06 +00:00
kfree(e);
return false;
}
x86/kvm: Sanitize kvm_async_pf_task_wait() While working on the entry consolidation I stumbled over the KVM async page fault handler and kvm_async_pf_task_wait() in particular. It took me a while to realize that the randomly sprinkled around rcu_irq_enter()/exit() invocations are just cargo cult programming. Several patches "fixed" RCU splats by curing the symptoms without noticing that the code is flawed from a design perspective. The main problem is that this async injection is not based on a proper handshake mechanism and only respects the minimal requirement, i.e. the guest is not in a state where it has interrupts disabled. Aside of that the actual code is a convoluted one fits it all swiss army knife. It is invoked from different places with different RCU constraints: 1) Host side: vcpu_enter_guest() kvm_x86_ops->handle_exit() kvm_handle_page_fault() kvm_async_pf_task_wait() The invocation happens from fully preemptible context. 2) Guest side: The async page fault interrupted: a) user space b) preemptible kernel code which is not in a RCU read side critical section c) non-preemtible kernel code or a RCU read side critical section or kernel code with CONFIG_PREEMPTION=n which allows not to differentiate between #2b and #2c. RCU is watching for: #1 The vCPU exited and current is definitely not the idle task #2a The #PF entry code on the guest went through enter_from_user_mode() which reactivates RCU #2b There is no preemptible, interrupts enabled code in the kernel which can run with RCU looking away. (The idle task is always non preemptible). I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU voodoo at all. In #2c RCU is eventually not watching, but as that state cannot schedule anyway there is no point to worry about it so it has to invoke rcu_irq_enter() before running that code. This can be optimized, but this will be done as an extra step in course of the entry code consolidation work. So the proper solution for this is to: - Split kvm_async_pf_task_wait() into schedule and halt based waiting interfaces which share the enqueueing code. - Add comments (condensed form of this changelog) to spare others the time waste and pain of reverse engineering all of this with the help of uncomprehensible changelogs and code history. - Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(), user mode and schedulable kernel side async page faults (#1, #2a, #2b) - Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel case (#2c). For this case also remove the rcu_irq_exit()/enter() pair around the halt as it is just a pointless exercise: - vCPUs can VMEXIT at any random point and can be scheduled out for an arbitrary amount of time by the host and this is not any different except that it voluntary triggers the exit via halt. - The interrupted context could have RCU watching already. So the rcu_irq_exit() before the halt is not gaining anything aside of confusing the reader. Claiming that this might prevent RCU stalls is just an illusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
2020-03-06 23:42:06 +00:00
n->token = token;
n->cpu = smp_processor_id();
init_swait_queue_head(&n->wq);
hlist_add_head(&n->link, &b->list);
raw_spin_unlock(&b->lock);
return true;
}
/*
* kvm_async_pf_task_wait_schedule - Wait for pagefault to be handled
* @token: Token to identify the sleep node entry
*
* Invoked from the async pagefault handling code or from the VM exit page
* fault handler. In both cases RCU is watching.
*/
void kvm_async_pf_task_wait_schedule(u32 token)
{
struct kvm_task_sleep_node n;
DECLARE_SWAITQUEUE(wait);
lockdep_assert_irqs_disabled();
if (!kvm_async_pf_queue_task(token, &n))
return;
x86/kvm: Sanitize kvm_async_pf_task_wait() While working on the entry consolidation I stumbled over the KVM async page fault handler and kvm_async_pf_task_wait() in particular. It took me a while to realize that the randomly sprinkled around rcu_irq_enter()/exit() invocations are just cargo cult programming. Several patches "fixed" RCU splats by curing the symptoms without noticing that the code is flawed from a design perspective. The main problem is that this async injection is not based on a proper handshake mechanism and only respects the minimal requirement, i.e. the guest is not in a state where it has interrupts disabled. Aside of that the actual code is a convoluted one fits it all swiss army knife. It is invoked from different places with different RCU constraints: 1) Host side: vcpu_enter_guest() kvm_x86_ops->handle_exit() kvm_handle_page_fault() kvm_async_pf_task_wait() The invocation happens from fully preemptible context. 2) Guest side: The async page fault interrupted: a) user space b) preemptible kernel code which is not in a RCU read side critical section c) non-preemtible kernel code or a RCU read side critical section or kernel code with CONFIG_PREEMPTION=n which allows not to differentiate between #2b and #2c. RCU is watching for: #1 The vCPU exited and current is definitely not the idle task #2a The #PF entry code on the guest went through enter_from_user_mode() which reactivates RCU #2b There is no preemptible, interrupts enabled code in the kernel which can run with RCU looking away. (The idle task is always non preemptible). I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU voodoo at all. In #2c RCU is eventually not watching, but as that state cannot schedule anyway there is no point to worry about it so it has to invoke rcu_irq_enter() before running that code. This can be optimized, but this will be done as an extra step in course of the entry code consolidation work. So the proper solution for this is to: - Split kvm_async_pf_task_wait() into schedule and halt based waiting interfaces which share the enqueueing code. - Add comments (condensed form of this changelog) to spare others the time waste and pain of reverse engineering all of this with the help of uncomprehensible changelogs and code history. - Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(), user mode and schedulable kernel side async page faults (#1, #2a, #2b) - Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel case (#2c). For this case also remove the rcu_irq_exit()/enter() pair around the halt as it is just a pointless exercise: - vCPUs can VMEXIT at any random point and can be scheduled out for an arbitrary amount of time by the host and this is not any different except that it voluntary triggers the exit via halt. - The interrupted context could have RCU watching already. So the rcu_irq_exit() before the halt is not gaining anything aside of confusing the reader. Claiming that this might prevent RCU stalls is just an illusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
2020-03-06 23:42:06 +00:00
for (;;) {
prepare_to_swait_exclusive(&n.wq, &wait, TASK_UNINTERRUPTIBLE);
if (hlist_unhashed(&n.link))
break;
local_irq_enable();
schedule();
local_irq_disable();
}
x86/kvm: Sanitize kvm_async_pf_task_wait() While working on the entry consolidation I stumbled over the KVM async page fault handler and kvm_async_pf_task_wait() in particular. It took me a while to realize that the randomly sprinkled around rcu_irq_enter()/exit() invocations are just cargo cult programming. Several patches "fixed" RCU splats by curing the symptoms without noticing that the code is flawed from a design perspective. The main problem is that this async injection is not based on a proper handshake mechanism and only respects the minimal requirement, i.e. the guest is not in a state where it has interrupts disabled. Aside of that the actual code is a convoluted one fits it all swiss army knife. It is invoked from different places with different RCU constraints: 1) Host side: vcpu_enter_guest() kvm_x86_ops->handle_exit() kvm_handle_page_fault() kvm_async_pf_task_wait() The invocation happens from fully preemptible context. 2) Guest side: The async page fault interrupted: a) user space b) preemptible kernel code which is not in a RCU read side critical section c) non-preemtible kernel code or a RCU read side critical section or kernel code with CONFIG_PREEMPTION=n which allows not to differentiate between #2b and #2c. RCU is watching for: #1 The vCPU exited and current is definitely not the idle task #2a The #PF entry code on the guest went through enter_from_user_mode() which reactivates RCU #2b There is no preemptible, interrupts enabled code in the kernel which can run with RCU looking away. (The idle task is always non preemptible). I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU voodoo at all. In #2c RCU is eventually not watching, but as that state cannot schedule anyway there is no point to worry about it so it has to invoke rcu_irq_enter() before running that code. This can be optimized, but this will be done as an extra step in course of the entry code consolidation work. So the proper solution for this is to: - Split kvm_async_pf_task_wait() into schedule and halt based waiting interfaces which share the enqueueing code. - Add comments (condensed form of this changelog) to spare others the time waste and pain of reverse engineering all of this with the help of uncomprehensible changelogs and code history. - Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(), user mode and schedulable kernel side async page faults (#1, #2a, #2b) - Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel case (#2c). For this case also remove the rcu_irq_exit()/enter() pair around the halt as it is just a pointless exercise: - vCPUs can VMEXIT at any random point and can be scheduled out for an arbitrary amount of time by the host and this is not any different except that it voluntary triggers the exit via halt. - The interrupted context could have RCU watching already. So the rcu_irq_exit() before the halt is not gaining anything aside of confusing the reader. Claiming that this might prevent RCU stalls is just an illusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
2020-03-06 23:42:06 +00:00
finish_swait(&n.wq, &wait);
}
EXPORT_SYMBOL_GPL(kvm_async_pf_task_wait_schedule);
static void apf_task_wake_one(struct kvm_task_sleep_node *n)
{
hlist_del_init(&n->link);
if (swq_has_sleeper(&n->wq))
swake_up_one(&n->wq);
}
static void apf_task_wake_all(void)
{
int i;
for (i = 0; i < KVM_TASK_SLEEP_HASHSIZE; i++) {
struct kvm_task_sleep_head *b = &async_pf_sleepers[i];
x86/kvm: Sanitize kvm_async_pf_task_wait() While working on the entry consolidation I stumbled over the KVM async page fault handler and kvm_async_pf_task_wait() in particular. It took me a while to realize that the randomly sprinkled around rcu_irq_enter()/exit() invocations are just cargo cult programming. Several patches "fixed" RCU splats by curing the symptoms without noticing that the code is flawed from a design perspective. The main problem is that this async injection is not based on a proper handshake mechanism and only respects the minimal requirement, i.e. the guest is not in a state where it has interrupts disabled. Aside of that the actual code is a convoluted one fits it all swiss army knife. It is invoked from different places with different RCU constraints: 1) Host side: vcpu_enter_guest() kvm_x86_ops->handle_exit() kvm_handle_page_fault() kvm_async_pf_task_wait() The invocation happens from fully preemptible context. 2) Guest side: The async page fault interrupted: a) user space b) preemptible kernel code which is not in a RCU read side critical section c) non-preemtible kernel code or a RCU read side critical section or kernel code with CONFIG_PREEMPTION=n which allows not to differentiate between #2b and #2c. RCU is watching for: #1 The vCPU exited and current is definitely not the idle task #2a The #PF entry code on the guest went through enter_from_user_mode() which reactivates RCU #2b There is no preemptible, interrupts enabled code in the kernel which can run with RCU looking away. (The idle task is always non preemptible). I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU voodoo at all. In #2c RCU is eventually not watching, but as that state cannot schedule anyway there is no point to worry about it so it has to invoke rcu_irq_enter() before running that code. This can be optimized, but this will be done as an extra step in course of the entry code consolidation work. So the proper solution for this is to: - Split kvm_async_pf_task_wait() into schedule and halt based waiting interfaces which share the enqueueing code. - Add comments (condensed form of this changelog) to spare others the time waste and pain of reverse engineering all of this with the help of uncomprehensible changelogs and code history. - Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(), user mode and schedulable kernel side async page faults (#1, #2a, #2b) - Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel case (#2c). For this case also remove the rcu_irq_exit()/enter() pair around the halt as it is just a pointless exercise: - vCPUs can VMEXIT at any random point and can be scheduled out for an arbitrary amount of time by the host and this is not any different except that it voluntary triggers the exit via halt. - The interrupted context could have RCU watching already. So the rcu_irq_exit() before the halt is not gaining anything aside of confusing the reader. Claiming that this might prevent RCU stalls is just an illusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
2020-03-06 23:42:06 +00:00
struct kvm_task_sleep_node *n;
struct hlist_node *p, *next;
raw_spin_lock(&b->lock);
hlist_for_each_safe(p, next, &b->list) {
x86/kvm: Sanitize kvm_async_pf_task_wait() While working on the entry consolidation I stumbled over the KVM async page fault handler and kvm_async_pf_task_wait() in particular. It took me a while to realize that the randomly sprinkled around rcu_irq_enter()/exit() invocations are just cargo cult programming. Several patches "fixed" RCU splats by curing the symptoms without noticing that the code is flawed from a design perspective. The main problem is that this async injection is not based on a proper handshake mechanism and only respects the minimal requirement, i.e. the guest is not in a state where it has interrupts disabled. Aside of that the actual code is a convoluted one fits it all swiss army knife. It is invoked from different places with different RCU constraints: 1) Host side: vcpu_enter_guest() kvm_x86_ops->handle_exit() kvm_handle_page_fault() kvm_async_pf_task_wait() The invocation happens from fully preemptible context. 2) Guest side: The async page fault interrupted: a) user space b) preemptible kernel code which is not in a RCU read side critical section c) non-preemtible kernel code or a RCU read side critical section or kernel code with CONFIG_PREEMPTION=n which allows not to differentiate between #2b and #2c. RCU is watching for: #1 The vCPU exited and current is definitely not the idle task #2a The #PF entry code on the guest went through enter_from_user_mode() which reactivates RCU #2b There is no preemptible, interrupts enabled code in the kernel which can run with RCU looking away. (The idle task is always non preemptible). I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU voodoo at all. In #2c RCU is eventually not watching, but as that state cannot schedule anyway there is no point to worry about it so it has to invoke rcu_irq_enter() before running that code. This can be optimized, but this will be done as an extra step in course of the entry code consolidation work. So the proper solution for this is to: - Split kvm_async_pf_task_wait() into schedule and halt based waiting interfaces which share the enqueueing code. - Add comments (condensed form of this changelog) to spare others the time waste and pain of reverse engineering all of this with the help of uncomprehensible changelogs and code history. - Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(), user mode and schedulable kernel side async page faults (#1, #2a, #2b) - Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel case (#2c). For this case also remove the rcu_irq_exit()/enter() pair around the halt as it is just a pointless exercise: - vCPUs can VMEXIT at any random point and can be scheduled out for an arbitrary amount of time by the host and this is not any different except that it voluntary triggers the exit via halt. - The interrupted context could have RCU watching already. So the rcu_irq_exit() before the halt is not gaining anything aside of confusing the reader. Claiming that this might prevent RCU stalls is just an illusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
2020-03-06 23:42:06 +00:00
n = hlist_entry(p, typeof(*n), link);
if (n->cpu == smp_processor_id())
apf_task_wake_one(n);
}
raw_spin_unlock(&b->lock);
}
}
void kvm_async_pf_task_wake(u32 token)
{
u32 key = hash_32(token, KVM_TASK_SLEEP_HASHBITS);
struct kvm_task_sleep_head *b = &async_pf_sleepers[key];
struct kvm_task_sleep_node *n, *dummy = NULL;
if (token == ~0) {
apf_task_wake_all();
return;
}
again:
raw_spin_lock(&b->lock);
n = _find_apf_task(b, token);
if (!n) {
/*
* Async #PF not yet handled, add a dummy entry for the token.
* Allocating the token must be down outside of the raw lock
* as the allocator is preemptible on PREEMPT_RT kernels.
*/
if (!dummy) {
raw_spin_unlock(&b->lock);
x86, kvm: use correct GFP flags for preemption disabled Commit ddd7ed842627 ("x86/kvm: Alloc dummy async #PF token outside of raw spinlock") leads to the following Smatch static checker warning: arch/x86/kernel/kvm.c:212 kvm_async_pf_task_wake() warn: sleeping in atomic context arch/x86/kernel/kvm.c 202 raw_spin_lock(&b->lock); 203 n = _find_apf_task(b, token); 204 if (!n) { 205 /* 206 * Async #PF not yet handled, add a dummy entry for the token. 207 * Allocating the token must be down outside of the raw lock 208 * as the allocator is preemptible on PREEMPT_RT kernels. 209 */ 210 if (!dummy) { 211 raw_spin_unlock(&b->lock); --> 212 dummy = kzalloc(sizeof(*dummy), GFP_KERNEL); ^^^^^^^^^^ Smatch thinks the caller has preempt disabled. The `smdb.py preempt kvm_async_pf_task_wake` output call tree is: sysvec_kvm_asyncpf_interrupt() <- disables preempt -> __sysvec_kvm_asyncpf_interrupt() -> kvm_async_pf_task_wake() The caller is this: arch/x86/kernel/kvm.c 290 DEFINE_IDTENTRY_SYSVEC(sysvec_kvm_asyncpf_interrupt) 291 { 292 struct pt_regs *old_regs = set_irq_regs(regs); 293 u32 token; 294 295 ack_APIC_irq(); 296 297 inc_irq_stat(irq_hv_callback_count); 298 299 if (__this_cpu_read(apf_reason.enabled)) { 300 token = __this_cpu_read(apf_reason.token); 301 kvm_async_pf_task_wake(token); 302 __this_cpu_write(apf_reason.token, 0); 303 wrmsrl(MSR_KVM_ASYNC_PF_ACK, 1); 304 } 305 306 set_irq_regs(old_regs); 307 } The DEFINE_IDTENTRY_SYSVEC() is a wrapper that calls this function from the call_on_irqstack_cond(). It's inside the call_on_irqstack_cond() where preempt is disabled (unless it's already disabled). The irq_enter/exit_rcu() functions disable/enable preempt. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-24 13:43:31 +00:00
dummy = kzalloc(sizeof(*dummy), GFP_ATOMIC);
/*
* Continue looping on allocation failure, eventually
* the async #PF will be handled and allocating a new
* node will be unnecessary.
*/
if (!dummy)
cpu_relax();
/*
* Recheck for async #PF completion before enqueueing
* the dummy token to avoid duplicate list entries.
*/
goto again;
}
dummy->token = token;
dummy->cpu = smp_processor_id();
init_swait_queue_head(&dummy->wq);
hlist_add_head(&dummy->link, &b->list);
dummy = NULL;
x86/kvm: Sanitize kvm_async_pf_task_wait() While working on the entry consolidation I stumbled over the KVM async page fault handler and kvm_async_pf_task_wait() in particular. It took me a while to realize that the randomly sprinkled around rcu_irq_enter()/exit() invocations are just cargo cult programming. Several patches "fixed" RCU splats by curing the symptoms without noticing that the code is flawed from a design perspective. The main problem is that this async injection is not based on a proper handshake mechanism and only respects the minimal requirement, i.e. the guest is not in a state where it has interrupts disabled. Aside of that the actual code is a convoluted one fits it all swiss army knife. It is invoked from different places with different RCU constraints: 1) Host side: vcpu_enter_guest() kvm_x86_ops->handle_exit() kvm_handle_page_fault() kvm_async_pf_task_wait() The invocation happens from fully preemptible context. 2) Guest side: The async page fault interrupted: a) user space b) preemptible kernel code which is not in a RCU read side critical section c) non-preemtible kernel code or a RCU read side critical section or kernel code with CONFIG_PREEMPTION=n which allows not to differentiate between #2b and #2c. RCU is watching for: #1 The vCPU exited and current is definitely not the idle task #2a The #PF entry code on the guest went through enter_from_user_mode() which reactivates RCU #2b There is no preemptible, interrupts enabled code in the kernel which can run with RCU looking away. (The idle task is always non preemptible). I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU voodoo at all. In #2c RCU is eventually not watching, but as that state cannot schedule anyway there is no point to worry about it so it has to invoke rcu_irq_enter() before running that code. This can be optimized, but this will be done as an extra step in course of the entry code consolidation work. So the proper solution for this is to: - Split kvm_async_pf_task_wait() into schedule and halt based waiting interfaces which share the enqueueing code. - Add comments (condensed form of this changelog) to spare others the time waste and pain of reverse engineering all of this with the help of uncomprehensible changelogs and code history. - Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(), user mode and schedulable kernel side async page faults (#1, #2a, #2b) - Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel case (#2c). For this case also remove the rcu_irq_exit()/enter() pair around the halt as it is just a pointless exercise: - vCPUs can VMEXIT at any random point and can be scheduled out for an arbitrary amount of time by the host and this is not any different except that it voluntary triggers the exit via halt. - The interrupted context could have RCU watching already. So the rcu_irq_exit() before the halt is not gaining anything aside of confusing the reader. Claiming that this might prevent RCU stalls is just an illusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
2020-03-06 23:42:06 +00:00
} else {
apf_task_wake_one(n);
x86/kvm: Sanitize kvm_async_pf_task_wait() While working on the entry consolidation I stumbled over the KVM async page fault handler and kvm_async_pf_task_wait() in particular. It took me a while to realize that the randomly sprinkled around rcu_irq_enter()/exit() invocations are just cargo cult programming. Several patches "fixed" RCU splats by curing the symptoms without noticing that the code is flawed from a design perspective. The main problem is that this async injection is not based on a proper handshake mechanism and only respects the minimal requirement, i.e. the guest is not in a state where it has interrupts disabled. Aside of that the actual code is a convoluted one fits it all swiss army knife. It is invoked from different places with different RCU constraints: 1) Host side: vcpu_enter_guest() kvm_x86_ops->handle_exit() kvm_handle_page_fault() kvm_async_pf_task_wait() The invocation happens from fully preemptible context. 2) Guest side: The async page fault interrupted: a) user space b) preemptible kernel code which is not in a RCU read side critical section c) non-preemtible kernel code or a RCU read side critical section or kernel code with CONFIG_PREEMPTION=n which allows not to differentiate between #2b and #2c. RCU is watching for: #1 The vCPU exited and current is definitely not the idle task #2a The #PF entry code on the guest went through enter_from_user_mode() which reactivates RCU #2b There is no preemptible, interrupts enabled code in the kernel which can run with RCU looking away. (The idle task is always non preemptible). I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU voodoo at all. In #2c RCU is eventually not watching, but as that state cannot schedule anyway there is no point to worry about it so it has to invoke rcu_irq_enter() before running that code. This can be optimized, but this will be done as an extra step in course of the entry code consolidation work. So the proper solution for this is to: - Split kvm_async_pf_task_wait() into schedule and halt based waiting interfaces which share the enqueueing code. - Add comments (condensed form of this changelog) to spare others the time waste and pain of reverse engineering all of this with the help of uncomprehensible changelogs and code history. - Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(), user mode and schedulable kernel side async page faults (#1, #2a, #2b) - Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel case (#2c). For this case also remove the rcu_irq_exit()/enter() pair around the halt as it is just a pointless exercise: - vCPUs can VMEXIT at any random point and can be scheduled out for an arbitrary amount of time by the host and this is not any different except that it voluntary triggers the exit via halt. - The interrupted context could have RCU watching already. So the rcu_irq_exit() before the halt is not gaining anything aside of confusing the reader. Claiming that this might prevent RCU stalls is just an illusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
2020-03-06 23:42:06 +00:00
}
raw_spin_unlock(&b->lock);
/* A dummy token might be allocated and ultimately not used. */
kfree(dummy);
}
EXPORT_SYMBOL_GPL(kvm_async_pf_task_wake);
noinstr u32 kvm_read_and_reset_apf_flags(void)
{
u32 flags = 0;
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:40 +00:00
if (__this_cpu_read(apf_reason.enabled)) {
flags = __this_cpu_read(apf_reason.flags);
__this_cpu_write(apf_reason.flags, 0);
}
return flags;
}
EXPORT_SYMBOL_GPL(kvm_read_and_reset_apf_flags);
noinstr bool __kvm_handle_async_pf(struct pt_regs *regs, u32 token)
{
u32 flags = kvm_read_and_reset_apf_flags();
irqentry_state_t state;
x86/kvm: Sanitize kvm_async_pf_task_wait() While working on the entry consolidation I stumbled over the KVM async page fault handler and kvm_async_pf_task_wait() in particular. It took me a while to realize that the randomly sprinkled around rcu_irq_enter()/exit() invocations are just cargo cult programming. Several patches "fixed" RCU splats by curing the symptoms without noticing that the code is flawed from a design perspective. The main problem is that this async injection is not based on a proper handshake mechanism and only respects the minimal requirement, i.e. the guest is not in a state where it has interrupts disabled. Aside of that the actual code is a convoluted one fits it all swiss army knife. It is invoked from different places with different RCU constraints: 1) Host side: vcpu_enter_guest() kvm_x86_ops->handle_exit() kvm_handle_page_fault() kvm_async_pf_task_wait() The invocation happens from fully preemptible context. 2) Guest side: The async page fault interrupted: a) user space b) preemptible kernel code which is not in a RCU read side critical section c) non-preemtible kernel code or a RCU read side critical section or kernel code with CONFIG_PREEMPTION=n which allows not to differentiate between #2b and #2c. RCU is watching for: #1 The vCPU exited and current is definitely not the idle task #2a The #PF entry code on the guest went through enter_from_user_mode() which reactivates RCU #2b There is no preemptible, interrupts enabled code in the kernel which can run with RCU looking away. (The idle task is always non preemptible). I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU voodoo at all. In #2c RCU is eventually not watching, but as that state cannot schedule anyway there is no point to worry about it so it has to invoke rcu_irq_enter() before running that code. This can be optimized, but this will be done as an extra step in course of the entry code consolidation work. So the proper solution for this is to: - Split kvm_async_pf_task_wait() into schedule and halt based waiting interfaces which share the enqueueing code. - Add comments (condensed form of this changelog) to spare others the time waste and pain of reverse engineering all of this with the help of uncomprehensible changelogs and code history. - Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(), user mode and schedulable kernel side async page faults (#1, #2a, #2b) - Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel case (#2c). For this case also remove the rcu_irq_exit()/enter() pair around the halt as it is just a pointless exercise: - vCPUs can VMEXIT at any random point and can be scheduled out for an arbitrary amount of time by the host and this is not any different except that it voluntary triggers the exit via halt. - The interrupted context could have RCU watching already. So the rcu_irq_exit() before the halt is not gaining anything aside of confusing the reader. Claiming that this might prevent RCU stalls is just an illusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
2020-03-06 23:42:06 +00:00
if (!flags)
return false;
x86/kvm: Sanitize kvm_async_pf_task_wait() While working on the entry consolidation I stumbled over the KVM async page fault handler and kvm_async_pf_task_wait() in particular. It took me a while to realize that the randomly sprinkled around rcu_irq_enter()/exit() invocations are just cargo cult programming. Several patches "fixed" RCU splats by curing the symptoms without noticing that the code is flawed from a design perspective. The main problem is that this async injection is not based on a proper handshake mechanism and only respects the minimal requirement, i.e. the guest is not in a state where it has interrupts disabled. Aside of that the actual code is a convoluted one fits it all swiss army knife. It is invoked from different places with different RCU constraints: 1) Host side: vcpu_enter_guest() kvm_x86_ops->handle_exit() kvm_handle_page_fault() kvm_async_pf_task_wait() The invocation happens from fully preemptible context. 2) Guest side: The async page fault interrupted: a) user space b) preemptible kernel code which is not in a RCU read side critical section c) non-preemtible kernel code or a RCU read side critical section or kernel code with CONFIG_PREEMPTION=n which allows not to differentiate between #2b and #2c. RCU is watching for: #1 The vCPU exited and current is definitely not the idle task #2a The #PF entry code on the guest went through enter_from_user_mode() which reactivates RCU #2b There is no preemptible, interrupts enabled code in the kernel which can run with RCU looking away. (The idle task is always non preemptible). I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU voodoo at all. In #2c RCU is eventually not watching, but as that state cannot schedule anyway there is no point to worry about it so it has to invoke rcu_irq_enter() before running that code. This can be optimized, but this will be done as an extra step in course of the entry code consolidation work. So the proper solution for this is to: - Split kvm_async_pf_task_wait() into schedule and halt based waiting interfaces which share the enqueueing code. - Add comments (condensed form of this changelog) to spare others the time waste and pain of reverse engineering all of this with the help of uncomprehensible changelogs and code history. - Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(), user mode and schedulable kernel side async page faults (#1, #2a, #2b) - Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel case (#2c). For this case also remove the rcu_irq_exit()/enter() pair around the halt as it is just a pointless exercise: - vCPUs can VMEXIT at any random point and can be scheduled out for an arbitrary amount of time by the host and this is not any different except that it voluntary triggers the exit via halt. - The interrupted context could have RCU watching already. So the rcu_irq_exit() before the halt is not gaining anything aside of confusing the reader. Claiming that this might prevent RCU stalls is just an illusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
2020-03-06 23:42:06 +00:00
state = irqentry_enter(regs);
instrumentation_begin();
x86/kvm: Sanitize kvm_async_pf_task_wait() While working on the entry consolidation I stumbled over the KVM async page fault handler and kvm_async_pf_task_wait() in particular. It took me a while to realize that the randomly sprinkled around rcu_irq_enter()/exit() invocations are just cargo cult programming. Several patches "fixed" RCU splats by curing the symptoms without noticing that the code is flawed from a design perspective. The main problem is that this async injection is not based on a proper handshake mechanism and only respects the minimal requirement, i.e. the guest is not in a state where it has interrupts disabled. Aside of that the actual code is a convoluted one fits it all swiss army knife. It is invoked from different places with different RCU constraints: 1) Host side: vcpu_enter_guest() kvm_x86_ops->handle_exit() kvm_handle_page_fault() kvm_async_pf_task_wait() The invocation happens from fully preemptible context. 2) Guest side: The async page fault interrupted: a) user space b) preemptible kernel code which is not in a RCU read side critical section c) non-preemtible kernel code or a RCU read side critical section or kernel code with CONFIG_PREEMPTION=n which allows not to differentiate between #2b and #2c. RCU is watching for: #1 The vCPU exited and current is definitely not the idle task #2a The #PF entry code on the guest went through enter_from_user_mode() which reactivates RCU #2b There is no preemptible, interrupts enabled code in the kernel which can run with RCU looking away. (The idle task is always non preemptible). I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU voodoo at all. In #2c RCU is eventually not watching, but as that state cannot schedule anyway there is no point to worry about it so it has to invoke rcu_irq_enter() before running that code. This can be optimized, but this will be done as an extra step in course of the entry code consolidation work. So the proper solution for this is to: - Split kvm_async_pf_task_wait() into schedule and halt based waiting interfaces which share the enqueueing code. - Add comments (condensed form of this changelog) to spare others the time waste and pain of reverse engineering all of this with the help of uncomprehensible changelogs and code history. - Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(), user mode and schedulable kernel side async page faults (#1, #2a, #2b) - Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel case (#2c). For this case also remove the rcu_irq_exit()/enter() pair around the halt as it is just a pointless exercise: - vCPUs can VMEXIT at any random point and can be scheduled out for an arbitrary amount of time by the host and this is not any different except that it voluntary triggers the exit via halt. - The interrupted context could have RCU watching already. So the rcu_irq_exit() before the halt is not gaining anything aside of confusing the reader. Claiming that this might prevent RCU stalls is just an illusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
2020-03-06 23:42:06 +00:00
/*
* If the host managed to inject an async #PF into an interrupt
* disabled region, then die hard as this is not going to end well
* and the host side is seriously broken.
*/
if (unlikely(!(regs->flags & X86_EFLAGS_IF)))
panic("Host injected async #PF in interrupt disabled region\n");
if (flags & KVM_PV_REASON_PAGE_NOT_PRESENT) {
if (unlikely(!(user_mode(regs))))
panic("Host injected async #PF in kernel mode\n");
/* Page is swapped out by the host. */
kvm_async_pf_task_wait_schedule(token);
x86/kvm: Sanitize kvm_async_pf_task_wait() While working on the entry consolidation I stumbled over the KVM async page fault handler and kvm_async_pf_task_wait() in particular. It took me a while to realize that the randomly sprinkled around rcu_irq_enter()/exit() invocations are just cargo cult programming. Several patches "fixed" RCU splats by curing the symptoms without noticing that the code is flawed from a design perspective. The main problem is that this async injection is not based on a proper handshake mechanism and only respects the minimal requirement, i.e. the guest is not in a state where it has interrupts disabled. Aside of that the actual code is a convoluted one fits it all swiss army knife. It is invoked from different places with different RCU constraints: 1) Host side: vcpu_enter_guest() kvm_x86_ops->handle_exit() kvm_handle_page_fault() kvm_async_pf_task_wait() The invocation happens from fully preemptible context. 2) Guest side: The async page fault interrupted: a) user space b) preemptible kernel code which is not in a RCU read side critical section c) non-preemtible kernel code or a RCU read side critical section or kernel code with CONFIG_PREEMPTION=n which allows not to differentiate between #2b and #2c. RCU is watching for: #1 The vCPU exited and current is definitely not the idle task #2a The #PF entry code on the guest went through enter_from_user_mode() which reactivates RCU #2b There is no preemptible, interrupts enabled code in the kernel which can run with RCU looking away. (The idle task is always non preemptible). I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU voodoo at all. In #2c RCU is eventually not watching, but as that state cannot schedule anyway there is no point to worry about it so it has to invoke rcu_irq_enter() before running that code. This can be optimized, but this will be done as an extra step in course of the entry code consolidation work. So the proper solution for this is to: - Split kvm_async_pf_task_wait() into schedule and halt based waiting interfaces which share the enqueueing code. - Add comments (condensed form of this changelog) to spare others the time waste and pain of reverse engineering all of this with the help of uncomprehensible changelogs and code history. - Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(), user mode and schedulable kernel side async page faults (#1, #2a, #2b) - Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel case (#2c). For this case also remove the rcu_irq_exit()/enter() pair around the halt as it is just a pointless exercise: - vCPUs can VMEXIT at any random point and can be scheduled out for an arbitrary amount of time by the host and this is not any different except that it voluntary triggers the exit via halt. - The interrupted context could have RCU watching already. So the rcu_irq_exit() before the halt is not gaining anything aside of confusing the reader. Claiming that this might prevent RCU stalls is just an illusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
2020-03-06 23:42:06 +00:00
} else {
WARN_ONCE(1, "Unexpected async PF flags: %x\n", flags);
}
instrumentation_end();
irqentry_exit(regs, state);
x86/kvm: Sanitize kvm_async_pf_task_wait() While working on the entry consolidation I stumbled over the KVM async page fault handler and kvm_async_pf_task_wait() in particular. It took me a while to realize that the randomly sprinkled around rcu_irq_enter()/exit() invocations are just cargo cult programming. Several patches "fixed" RCU splats by curing the symptoms without noticing that the code is flawed from a design perspective. The main problem is that this async injection is not based on a proper handshake mechanism and only respects the minimal requirement, i.e. the guest is not in a state where it has interrupts disabled. Aside of that the actual code is a convoluted one fits it all swiss army knife. It is invoked from different places with different RCU constraints: 1) Host side: vcpu_enter_guest() kvm_x86_ops->handle_exit() kvm_handle_page_fault() kvm_async_pf_task_wait() The invocation happens from fully preemptible context. 2) Guest side: The async page fault interrupted: a) user space b) preemptible kernel code which is not in a RCU read side critical section c) non-preemtible kernel code or a RCU read side critical section or kernel code with CONFIG_PREEMPTION=n which allows not to differentiate between #2b and #2c. RCU is watching for: #1 The vCPU exited and current is definitely not the idle task #2a The #PF entry code on the guest went through enter_from_user_mode() which reactivates RCU #2b There is no preemptible, interrupts enabled code in the kernel which can run with RCU looking away. (The idle task is always non preemptible). I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU voodoo at all. In #2c RCU is eventually not watching, but as that state cannot schedule anyway there is no point to worry about it so it has to invoke rcu_irq_enter() before running that code. This can be optimized, but this will be done as an extra step in course of the entry code consolidation work. So the proper solution for this is to: - Split kvm_async_pf_task_wait() into schedule and halt based waiting interfaces which share the enqueueing code. - Add comments (condensed form of this changelog) to spare others the time waste and pain of reverse engineering all of this with the help of uncomprehensible changelogs and code history. - Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(), user mode and schedulable kernel side async page faults (#1, #2a, #2b) - Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel case (#2c). For this case also remove the rcu_irq_exit()/enter() pair around the halt as it is just a pointless exercise: - vCPUs can VMEXIT at any random point and can be scheduled out for an arbitrary amount of time by the host and this is not any different except that it voluntary triggers the exit via halt. - The interrupted context could have RCU watching already. So the rcu_irq_exit() before the halt is not gaining anything aside of confusing the reader. Claiming that this might prevent RCU stalls is just an illusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
2020-03-06 23:42:06 +00:00
return true;
}
DEFINE_IDTENTRY_SYSVEC(sysvec_kvm_asyncpf_interrupt)
{
struct pt_regs *old_regs = set_irq_regs(regs);
u32 token;
ack_APIC_irq();
inc_irq_stat(irq_hv_callback_count);
if (__this_cpu_read(apf_reason.enabled)) {
token = __this_cpu_read(apf_reason.token);
kvm_async_pf_task_wake(token);
__this_cpu_write(apf_reason.token, 0);
wrmsrl(MSR_KVM_ASYNC_PF_ACK, 1);
}
set_irq_regs(old_regs);
}
static void __init paravirt_ops_setup(void)
{
pv_info.name = "KVM";
if (kvm_para_has_feature(KVM_FEATURE_NOP_IO_DELAY))
pv_ops.cpu.io_delay = kvm_io_delay;
#ifdef CONFIG_X86_IO_APIC
no_timer_check = 1;
#endif
}
static void kvm_register_steal_time(void)
{
int cpu = smp_processor_id();
struct kvm_steal_time *st = &per_cpu(steal_time, cpu);
if (!has_steal_clock)
return;
x86, kvm: Fix kvm's use of __pa() on percpu areas In short, it is illegal to call __pa() on an address holding a percpu variable. This replaces those __pa() calls with slow_virt_to_phys(). All of the cases in this patch are in boot time (or CPU hotplug time at worst) code, so the slow pagetable walking in slow_virt_to_phys() is not expected to have a performance impact. The times when this actually matters are pretty obscure (certain 32-bit NUMA systems), but it _does_ happen. It is important to keep KVM guests working on these systems because the real hardware is getting harder and harder to find. This bug manifested first by me seeing a plain hang at boot after this message: CPU 0 irqstacks, hard=f3018000 soft=f301a000 or, sometimes, it would actually make it out to the console: [ 0.000000] BUG: unable to handle kernel paging request at ffffffff I eventually traced it down to the KVM async pagefault code. This can be worked around by disabling that code either at compile-time, or on the kernel command-line. The kvm async pagefault code was injecting page faults in to the guest which the guest misinterpreted because its "reason" was not being properly sent from the host. The guest passes a physical address of an per-cpu async page fault structure via an MSR to the host. Since __pa() is broken on percpu data, the physical address it sent was bascially bogus and the host went scribbling on random data. The guest never saw the real reason for the page fault (it was injected by the host), assumed that the kernel had taken a _real_ page fault, and panic()'d. The behavior varied, though, depending on what got corrupted by the bad write. Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20130122212435.4905663F@kernel.stglabs.ibm.com Acked-by: Rik van Riel <riel@redhat.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-22 21:24:35 +00:00
wrmsrl(MSR_KVM_STEAL_TIME, (slow_virt_to_phys(st) | KVM_MSR_ENABLED));
pr_debug("stealtime: cpu %d, msr %llx\n", cpu,
(unsigned long long) slow_virt_to_phys(st));
}
static DEFINE_PER_CPU_DECRYPTED(unsigned long, kvm_apic_eoi) = KVM_PV_EOI_DISABLED;
KVM guest: guest side for eoi avoidance The idea is simple: there's a bit, per APIC, in guest memory, that tells the guest that it does not need EOI. Guest tests it using a single est and clear operation - this is necessary so that host can detect interrupt nesting - and if set, it can skip the EOI MSR. I run a simple microbenchmark to show exit reduction (note: for testing, need to apply follow-up patch 'kvm: host side for eoi optimization' + a qemu patch I posted separately, on host): Before: Performance counter stats for 'sleep 1s': 47,357 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 5,001 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 22,124 kvm:kvm_apic [99.98%] 49,849 kvm:kvm_exit [99.98%] 21,115 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 22,937 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.98%] 22,207 kvm:kvm_apic_accept_irq [99.98%] 22,421 kvm:kvm_eoi [99.98%] 0 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 57 kvm:kvm_emulate_insn [99.99%] 0 kvm:vcpu_match_mmio [99.99%] 0 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 23,609 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [99.99%] 226 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002100578 seconds time elapsed After: Performance counter stats for 'sleep 1s': 28,354 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 1,347 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 1,931 kvm:kvm_apic [99.98%] 29,595 kvm:kvm_exit [99.98%] 24,884 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 1,986 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.99%] 25,953 kvm:kvm_apic_accept_irq [99.99%] 26,132 kvm:kvm_eoi [99.99%] 26,593 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 284 kvm:kvm_emulate_insn [99.99%] 68 kvm:vcpu_match_mmio [99.99%] 68 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 28,288 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [100.00%] 588 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002039622 seconds time elapsed We see that # of exits is almost halved. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-24 16:24:34 +00:00
x86/apic: Prevent tracing on apic_msr_write_eoi() The following RCU lockdep warning led to adding irq_enter()/irq_exit() into smp_reschedule_interrupt(): RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! no locks held by swapper/1/0. do_trace_write_msr native_write_msr native_apic_msr_eoi_write smp_reschedule_interrupt reschedule_interrupt As Peterz pointed out: | So now we're making a very frequent interrupt slower because of debug | code. | | The thing is, many many smp_reschedule_interrupt() invocations don't | actually execute anything much at all and are only sent to tickle the | return to user path (which does the actual preemption). | | Having to do the whole irq_enter/irq_exit dance just for this unlikely | debug case totally blows. Use the wrmsr_notrace() variant in native_apic_msr_write_eoi, annotate the kvm variant with notrace and add a native_apic_eoi callback to the apic structure so KVM guests are covered as well. This allows to revert the irq_enter/irq_exit dance in smp_reschedule_interrupt(). Suggested-by: Peter Zijlstra <peterz@infradead.org> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Cc: Mike Galbraith <efault@gmx.de> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1478488420-5982-3-git-send-email-wanpeng.li@hotmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-07 03:13:40 +00:00
static notrace void kvm_guest_apic_eoi_write(u32 reg, u32 val)
KVM guest: guest side for eoi avoidance The idea is simple: there's a bit, per APIC, in guest memory, that tells the guest that it does not need EOI. Guest tests it using a single est and clear operation - this is necessary so that host can detect interrupt nesting - and if set, it can skip the EOI MSR. I run a simple microbenchmark to show exit reduction (note: for testing, need to apply follow-up patch 'kvm: host side for eoi optimization' + a qemu patch I posted separately, on host): Before: Performance counter stats for 'sleep 1s': 47,357 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 5,001 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 22,124 kvm:kvm_apic [99.98%] 49,849 kvm:kvm_exit [99.98%] 21,115 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 22,937 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.98%] 22,207 kvm:kvm_apic_accept_irq [99.98%] 22,421 kvm:kvm_eoi [99.98%] 0 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 57 kvm:kvm_emulate_insn [99.99%] 0 kvm:vcpu_match_mmio [99.99%] 0 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 23,609 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [99.99%] 226 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002100578 seconds time elapsed After: Performance counter stats for 'sleep 1s': 28,354 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 1,347 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 1,931 kvm:kvm_apic [99.98%] 29,595 kvm:kvm_exit [99.98%] 24,884 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 1,986 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.99%] 25,953 kvm:kvm_apic_accept_irq [99.99%] 26,132 kvm:kvm_eoi [99.99%] 26,593 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 284 kvm:kvm_emulate_insn [99.99%] 68 kvm:vcpu_match_mmio [99.99%] 68 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 28,288 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [100.00%] 588 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002039622 seconds time elapsed We see that # of exits is almost halved. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-24 16:24:34 +00:00
{
/**
* This relies on __test_and_clear_bit to modify the memory
* in a way that is atomic with respect to the local CPU.
* The hypervisor only accesses this memory from the local CPU so
* there's no need for lock or memory barriers.
* An optimization barrier is implied in apic write.
*/
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:40 +00:00
if (__test_and_clear_bit(KVM_PV_EOI_BIT, this_cpu_ptr(&kvm_apic_eoi)))
KVM guest: guest side for eoi avoidance The idea is simple: there's a bit, per APIC, in guest memory, that tells the guest that it does not need EOI. Guest tests it using a single est and clear operation - this is necessary so that host can detect interrupt nesting - and if set, it can skip the EOI MSR. I run a simple microbenchmark to show exit reduction (note: for testing, need to apply follow-up patch 'kvm: host side for eoi optimization' + a qemu patch I posted separately, on host): Before: Performance counter stats for 'sleep 1s': 47,357 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 5,001 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 22,124 kvm:kvm_apic [99.98%] 49,849 kvm:kvm_exit [99.98%] 21,115 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 22,937 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.98%] 22,207 kvm:kvm_apic_accept_irq [99.98%] 22,421 kvm:kvm_eoi [99.98%] 0 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 57 kvm:kvm_emulate_insn [99.99%] 0 kvm:vcpu_match_mmio [99.99%] 0 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 23,609 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [99.99%] 226 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002100578 seconds time elapsed After: Performance counter stats for 'sleep 1s': 28,354 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 1,347 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 1,931 kvm:kvm_apic [99.98%] 29,595 kvm:kvm_exit [99.98%] 24,884 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 1,986 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.99%] 25,953 kvm:kvm_apic_accept_irq [99.99%] 26,132 kvm:kvm_eoi [99.99%] 26,593 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 284 kvm:kvm_emulate_insn [99.99%] 68 kvm:vcpu_match_mmio [99.99%] 68 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 28,288 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [100.00%] 588 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002039622 seconds time elapsed We see that # of exits is almost halved. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-24 16:24:34 +00:00
return;
x86/apic: Prevent tracing on apic_msr_write_eoi() The following RCU lockdep warning led to adding irq_enter()/irq_exit() into smp_reschedule_interrupt(): RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! no locks held by swapper/1/0. do_trace_write_msr native_write_msr native_apic_msr_eoi_write smp_reschedule_interrupt reschedule_interrupt As Peterz pointed out: | So now we're making a very frequent interrupt slower because of debug | code. | | The thing is, many many smp_reschedule_interrupt() invocations don't | actually execute anything much at all and are only sent to tickle the | return to user path (which does the actual preemption). | | Having to do the whole irq_enter/irq_exit dance just for this unlikely | debug case totally blows. Use the wrmsr_notrace() variant in native_apic_msr_write_eoi, annotate the kvm variant with notrace and add a native_apic_eoi callback to the apic structure so KVM guests are covered as well. This allows to revert the irq_enter/irq_exit dance in smp_reschedule_interrupt(). Suggested-by: Peter Zijlstra <peterz@infradead.org> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Cc: Mike Galbraith <efault@gmx.de> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1478488420-5982-3-git-send-email-wanpeng.li@hotmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-07 03:13:40 +00:00
apic->native_eoi_write(APIC_EOI, APIC_EOI_ACK);
KVM guest: guest side for eoi avoidance The idea is simple: there's a bit, per APIC, in guest memory, that tells the guest that it does not need EOI. Guest tests it using a single est and clear operation - this is necessary so that host can detect interrupt nesting - and if set, it can skip the EOI MSR. I run a simple microbenchmark to show exit reduction (note: for testing, need to apply follow-up patch 'kvm: host side for eoi optimization' + a qemu patch I posted separately, on host): Before: Performance counter stats for 'sleep 1s': 47,357 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 5,001 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 22,124 kvm:kvm_apic [99.98%] 49,849 kvm:kvm_exit [99.98%] 21,115 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 22,937 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.98%] 22,207 kvm:kvm_apic_accept_irq [99.98%] 22,421 kvm:kvm_eoi [99.98%] 0 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 57 kvm:kvm_emulate_insn [99.99%] 0 kvm:vcpu_match_mmio [99.99%] 0 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 23,609 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [99.99%] 226 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002100578 seconds time elapsed After: Performance counter stats for 'sleep 1s': 28,354 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 1,347 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 1,931 kvm:kvm_apic [99.98%] 29,595 kvm:kvm_exit [99.98%] 24,884 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 1,986 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.99%] 25,953 kvm:kvm_apic_accept_irq [99.99%] 26,132 kvm:kvm_eoi [99.99%] 26,593 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 284 kvm:kvm_emulate_insn [99.99%] 68 kvm:vcpu_match_mmio [99.99%] 68 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 28,288 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [100.00%] 588 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002039622 seconds time elapsed We see that # of exits is almost halved. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-24 16:24:34 +00:00
}
static void kvm_guest_cpu_init(void)
{
if (kvm_para_has_feature(KVM_FEATURE_ASYNC_PF_INT) && kvmapf) {
u64 pa;
WARN_ON_ONCE(!static_branch_likely(&kvm_async_pf_enabled));
pa = slow_virt_to_phys(this_cpu_ptr(&apf_reason));
pa |= KVM_ASYNC_PF_ENABLED | KVM_ASYNC_PF_DELIVERY_AS_INT;
if (kvm_para_has_feature(KVM_FEATURE_ASYNC_PF_VMEXIT))
pa |= KVM_ASYNC_PF_DELIVERY_AS_PF_VMEXIT;
wrmsrl(MSR_KVM_ASYNC_PF_INT, HYPERVISOR_CALLBACK_VECTOR);
wrmsrl(MSR_KVM_ASYNC_PF_EN, pa);
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:40 +00:00
__this_cpu_write(apf_reason.enabled, 1);
pr_debug("setup async PF for cpu %d\n", smp_processor_id());
}
KVM guest: guest side for eoi avoidance The idea is simple: there's a bit, per APIC, in guest memory, that tells the guest that it does not need EOI. Guest tests it using a single est and clear operation - this is necessary so that host can detect interrupt nesting - and if set, it can skip the EOI MSR. I run a simple microbenchmark to show exit reduction (note: for testing, need to apply follow-up patch 'kvm: host side for eoi optimization' + a qemu patch I posted separately, on host): Before: Performance counter stats for 'sleep 1s': 47,357 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 5,001 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 22,124 kvm:kvm_apic [99.98%] 49,849 kvm:kvm_exit [99.98%] 21,115 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 22,937 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.98%] 22,207 kvm:kvm_apic_accept_irq [99.98%] 22,421 kvm:kvm_eoi [99.98%] 0 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 57 kvm:kvm_emulate_insn [99.99%] 0 kvm:vcpu_match_mmio [99.99%] 0 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 23,609 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [99.99%] 226 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002100578 seconds time elapsed After: Performance counter stats for 'sleep 1s': 28,354 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 1,347 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 1,931 kvm:kvm_apic [99.98%] 29,595 kvm:kvm_exit [99.98%] 24,884 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 1,986 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.99%] 25,953 kvm:kvm_apic_accept_irq [99.99%] 26,132 kvm:kvm_eoi [99.99%] 26,593 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 284 kvm:kvm_emulate_insn [99.99%] 68 kvm:vcpu_match_mmio [99.99%] 68 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 28,288 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [100.00%] 588 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002039622 seconds time elapsed We see that # of exits is almost halved. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-24 16:24:34 +00:00
if (kvm_para_has_feature(KVM_FEATURE_PV_EOI)) {
unsigned long pa;
x86/kvm: Sanitize kvm_async_pf_task_wait() While working on the entry consolidation I stumbled over the KVM async page fault handler and kvm_async_pf_task_wait() in particular. It took me a while to realize that the randomly sprinkled around rcu_irq_enter()/exit() invocations are just cargo cult programming. Several patches "fixed" RCU splats by curing the symptoms without noticing that the code is flawed from a design perspective. The main problem is that this async injection is not based on a proper handshake mechanism and only respects the minimal requirement, i.e. the guest is not in a state where it has interrupts disabled. Aside of that the actual code is a convoluted one fits it all swiss army knife. It is invoked from different places with different RCU constraints: 1) Host side: vcpu_enter_guest() kvm_x86_ops->handle_exit() kvm_handle_page_fault() kvm_async_pf_task_wait() The invocation happens from fully preemptible context. 2) Guest side: The async page fault interrupted: a) user space b) preemptible kernel code which is not in a RCU read side critical section c) non-preemtible kernel code or a RCU read side critical section or kernel code with CONFIG_PREEMPTION=n which allows not to differentiate between #2b and #2c. RCU is watching for: #1 The vCPU exited and current is definitely not the idle task #2a The #PF entry code on the guest went through enter_from_user_mode() which reactivates RCU #2b There is no preemptible, interrupts enabled code in the kernel which can run with RCU looking away. (The idle task is always non preemptible). I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU voodoo at all. In #2c RCU is eventually not watching, but as that state cannot schedule anyway there is no point to worry about it so it has to invoke rcu_irq_enter() before running that code. This can be optimized, but this will be done as an extra step in course of the entry code consolidation work. So the proper solution for this is to: - Split kvm_async_pf_task_wait() into schedule and halt based waiting interfaces which share the enqueueing code. - Add comments (condensed form of this changelog) to spare others the time waste and pain of reverse engineering all of this with the help of uncomprehensible changelogs and code history. - Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(), user mode and schedulable kernel side async page faults (#1, #2a, #2b) - Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel case (#2c). For this case also remove the rcu_irq_exit()/enter() pair around the halt as it is just a pointless exercise: - vCPUs can VMEXIT at any random point and can be scheduled out for an arbitrary amount of time by the host and this is not any different except that it voluntary triggers the exit via halt. - The interrupted context could have RCU watching already. So the rcu_irq_exit() before the halt is not gaining anything aside of confusing the reader. Claiming that this might prevent RCU stalls is just an illusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
2020-03-06 23:42:06 +00:00
KVM guest: guest side for eoi avoidance The idea is simple: there's a bit, per APIC, in guest memory, that tells the guest that it does not need EOI. Guest tests it using a single est and clear operation - this is necessary so that host can detect interrupt nesting - and if set, it can skip the EOI MSR. I run a simple microbenchmark to show exit reduction (note: for testing, need to apply follow-up patch 'kvm: host side for eoi optimization' + a qemu patch I posted separately, on host): Before: Performance counter stats for 'sleep 1s': 47,357 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 5,001 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 22,124 kvm:kvm_apic [99.98%] 49,849 kvm:kvm_exit [99.98%] 21,115 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 22,937 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.98%] 22,207 kvm:kvm_apic_accept_irq [99.98%] 22,421 kvm:kvm_eoi [99.98%] 0 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 57 kvm:kvm_emulate_insn [99.99%] 0 kvm:vcpu_match_mmio [99.99%] 0 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 23,609 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [99.99%] 226 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002100578 seconds time elapsed After: Performance counter stats for 'sleep 1s': 28,354 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 1,347 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 1,931 kvm:kvm_apic [99.98%] 29,595 kvm:kvm_exit [99.98%] 24,884 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 1,986 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.99%] 25,953 kvm:kvm_apic_accept_irq [99.99%] 26,132 kvm:kvm_eoi [99.99%] 26,593 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 284 kvm:kvm_emulate_insn [99.99%] 68 kvm:vcpu_match_mmio [99.99%] 68 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 28,288 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [100.00%] 588 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002039622 seconds time elapsed We see that # of exits is almost halved. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-24 16:24:34 +00:00
/* Size alignment is implied but just to make it explicit. */
BUILD_BUG_ON(__alignof__(kvm_apic_eoi) < 4);
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:40 +00:00
__this_cpu_write(kvm_apic_eoi, 0);
pa = slow_virt_to_phys(this_cpu_ptr(&kvm_apic_eoi))
x86, kvm: Fix kvm's use of __pa() on percpu areas In short, it is illegal to call __pa() on an address holding a percpu variable. This replaces those __pa() calls with slow_virt_to_phys(). All of the cases in this patch are in boot time (or CPU hotplug time at worst) code, so the slow pagetable walking in slow_virt_to_phys() is not expected to have a performance impact. The times when this actually matters are pretty obscure (certain 32-bit NUMA systems), but it _does_ happen. It is important to keep KVM guests working on these systems because the real hardware is getting harder and harder to find. This bug manifested first by me seeing a plain hang at boot after this message: CPU 0 irqstacks, hard=f3018000 soft=f301a000 or, sometimes, it would actually make it out to the console: [ 0.000000] BUG: unable to handle kernel paging request at ffffffff I eventually traced it down to the KVM async pagefault code. This can be worked around by disabling that code either at compile-time, or on the kernel command-line. The kvm async pagefault code was injecting page faults in to the guest which the guest misinterpreted because its "reason" was not being properly sent from the host. The guest passes a physical address of an per-cpu async page fault structure via an MSR to the host. Since __pa() is broken on percpu data, the physical address it sent was bascially bogus and the host went scribbling on random data. The guest never saw the real reason for the page fault (it was injected by the host), assumed that the kernel had taken a _real_ page fault, and panic()'d. The behavior varied, though, depending on what got corrupted by the bad write. Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20130122212435.4905663F@kernel.stglabs.ibm.com Acked-by: Rik van Riel <riel@redhat.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-22 21:24:35 +00:00
| KVM_MSR_ENABLED;
KVM guest: guest side for eoi avoidance The idea is simple: there's a bit, per APIC, in guest memory, that tells the guest that it does not need EOI. Guest tests it using a single est and clear operation - this is necessary so that host can detect interrupt nesting - and if set, it can skip the EOI MSR. I run a simple microbenchmark to show exit reduction (note: for testing, need to apply follow-up patch 'kvm: host side for eoi optimization' + a qemu patch I posted separately, on host): Before: Performance counter stats for 'sleep 1s': 47,357 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 5,001 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 22,124 kvm:kvm_apic [99.98%] 49,849 kvm:kvm_exit [99.98%] 21,115 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 22,937 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.98%] 22,207 kvm:kvm_apic_accept_irq [99.98%] 22,421 kvm:kvm_eoi [99.98%] 0 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 57 kvm:kvm_emulate_insn [99.99%] 0 kvm:vcpu_match_mmio [99.99%] 0 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 23,609 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [99.99%] 226 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002100578 seconds time elapsed After: Performance counter stats for 'sleep 1s': 28,354 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 1,347 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 1,931 kvm:kvm_apic [99.98%] 29,595 kvm:kvm_exit [99.98%] 24,884 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 1,986 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.99%] 25,953 kvm:kvm_apic_accept_irq [99.99%] 26,132 kvm:kvm_eoi [99.99%] 26,593 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 284 kvm:kvm_emulate_insn [99.99%] 68 kvm:vcpu_match_mmio [99.99%] 68 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 28,288 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [100.00%] 588 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002039622 seconds time elapsed We see that # of exits is almost halved. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-24 16:24:34 +00:00
wrmsrl(MSR_KVM_PV_EOI_EN, pa);
}
if (has_steal_clock)
kvm_register_steal_time();
}
KVM guest: guest side for eoi avoidance The idea is simple: there's a bit, per APIC, in guest memory, that tells the guest that it does not need EOI. Guest tests it using a single est and clear operation - this is necessary so that host can detect interrupt nesting - and if set, it can skip the EOI MSR. I run a simple microbenchmark to show exit reduction (note: for testing, need to apply follow-up patch 'kvm: host side for eoi optimization' + a qemu patch I posted separately, on host): Before: Performance counter stats for 'sleep 1s': 47,357 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 5,001 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 22,124 kvm:kvm_apic [99.98%] 49,849 kvm:kvm_exit [99.98%] 21,115 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 22,937 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.98%] 22,207 kvm:kvm_apic_accept_irq [99.98%] 22,421 kvm:kvm_eoi [99.98%] 0 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 57 kvm:kvm_emulate_insn [99.99%] 0 kvm:vcpu_match_mmio [99.99%] 0 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 23,609 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [99.99%] 226 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002100578 seconds time elapsed After: Performance counter stats for 'sleep 1s': 28,354 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 1,347 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 1,931 kvm:kvm_apic [99.98%] 29,595 kvm:kvm_exit [99.98%] 24,884 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 1,986 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.99%] 25,953 kvm:kvm_apic_accept_irq [99.99%] 26,132 kvm:kvm_eoi [99.99%] 26,593 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 284 kvm:kvm_emulate_insn [99.99%] 68 kvm:vcpu_match_mmio [99.99%] 68 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 28,288 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [100.00%] 588 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002039622 seconds time elapsed We see that # of exits is almost halved. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-24 16:24:34 +00:00
static void kvm_pv_disable_apf(void)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:40 +00:00
if (!__this_cpu_read(apf_reason.enabled))
return;
wrmsrl(MSR_KVM_ASYNC_PF_EN, 0);
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:40 +00:00
__this_cpu_write(apf_reason.enabled, 0);
pr_debug("disable async PF for cpu %d\n", smp_processor_id());
}
static void kvm_disable_steal_time(void)
{
if (!has_steal_clock)
return;
wrmsr(MSR_KVM_STEAL_TIME, 0, 0);
}
static u64 kvm_steal_clock(int cpu)
{
u64 steal;
struct kvm_steal_time *src;
int version;
src = &per_cpu(steal_time, cpu);
do {
version = src->version;
virt_rmb();
steal = src->steal;
virt_rmb();
} while ((version & 1) || (version != src->version));
return steal;
}
static inline void __set_percpu_decrypted(void *ptr, unsigned long size)
{
early_set_memory_decrypted((unsigned long) ptr, size);
}
/*
* Iterate through all possible CPUs and map the memory region pointed
* by apf_reason, steal_time and kvm_apic_eoi as decrypted at once.
*
* Note: we iterate through all possible CPUs to ensure that CPUs
* hotplugged will have their per-cpu variable already mapped as
* decrypted.
*/
static void __init sev_map_percpu_data(void)
{
int cpu;
if (!cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT))
return;
for_each_possible_cpu(cpu) {
__set_percpu_decrypted(&per_cpu(apf_reason, cpu), sizeof(apf_reason));
__set_percpu_decrypted(&per_cpu(steal_time, cpu), sizeof(steal_time));
__set_percpu_decrypted(&per_cpu(kvm_apic_eoi, cpu), sizeof(kvm_apic_eoi));
}
}
static void kvm_guest_cpu_offline(bool shutdown)
{
kvm_disable_steal_time();
if (kvm_para_has_feature(KVM_FEATURE_PV_EOI))
wrmsrl(MSR_KVM_PV_EOI_EN, 0);
if (kvm_para_has_feature(KVM_FEATURE_MIGRATION_CONTROL))
wrmsrl(MSR_KVM_MIGRATION_CONTROL, 0);
kvm_pv_disable_apf();
if (!shutdown)
apf_task_wake_all();
kvmclock_disable();
}
static int kvm_cpu_online(unsigned int cpu)
{
unsigned long flags;
local_irq_save(flags);
kvm_guest_cpu_init();
local_irq_restore(flags);
return 0;
}
#ifdef CONFIG_SMP
static DEFINE_PER_CPU(cpumask_var_t, __pv_cpu_mask);
static bool pv_tlb_flush_supported(void)
{
return (kvm_para_has_feature(KVM_FEATURE_PV_TLB_FLUSH) &&
!kvm_para_has_hint(KVM_HINTS_REALTIME) &&
kvm_para_has_feature(KVM_FEATURE_STEAL_TIME) &&
!boot_cpu_has(X86_FEATURE_MWAIT) &&
(num_possible_cpus() != 1));
}
static bool pv_ipi_supported(void)
{
return (kvm_para_has_feature(KVM_FEATURE_PV_SEND_IPI) &&
(num_possible_cpus() != 1));
}
static bool pv_sched_yield_supported(void)
{
return (kvm_para_has_feature(KVM_FEATURE_PV_SCHED_YIELD) &&
!kvm_para_has_hint(KVM_HINTS_REALTIME) &&
kvm_para_has_feature(KVM_FEATURE_STEAL_TIME) &&
!boot_cpu_has(X86_FEATURE_MWAIT) &&
(num_possible_cpus() != 1));
}
#define KVM_IPI_CLUSTER_SIZE (2 * BITS_PER_LONG)
static void __send_ipi_mask(const struct cpumask *mask, int vector)
{
unsigned long flags;
int cpu, apic_id, icr;
int min = 0, max = 0;
#ifdef CONFIG_X86_64
__uint128_t ipi_bitmap = 0;
#else
u64 ipi_bitmap = 0;
#endif
long ret;
if (cpumask_empty(mask))
return;
local_irq_save(flags);
switch (vector) {
default:
icr = APIC_DM_FIXED | vector;
break;
case NMI_VECTOR:
icr = APIC_DM_NMI;
break;
}
for_each_cpu(cpu, mask) {
apic_id = per_cpu(x86_cpu_to_apicid, cpu);
if (!ipi_bitmap) {
min = max = apic_id;
} else if (apic_id < min && max - apic_id < KVM_IPI_CLUSTER_SIZE) {
ipi_bitmap <<= min - apic_id;
min = apic_id;
} else if (apic_id > min && apic_id < min + KVM_IPI_CLUSTER_SIZE) {
max = apic_id < max ? max : apic_id;
} else {
ret = kvm_hypercall4(KVM_HC_SEND_IPI, (unsigned long)ipi_bitmap,
(unsigned long)(ipi_bitmap >> BITS_PER_LONG), min, icr);
WARN_ONCE(ret < 0, "kvm-guest: failed to send PV IPI: %ld",
ret);
min = max = apic_id;
ipi_bitmap = 0;
}
__set_bit(apic_id - min, (unsigned long *)&ipi_bitmap);
}
if (ipi_bitmap) {
ret = kvm_hypercall4(KVM_HC_SEND_IPI, (unsigned long)ipi_bitmap,
(unsigned long)(ipi_bitmap >> BITS_PER_LONG), min, icr);
WARN_ONCE(ret < 0, "kvm-guest: failed to send PV IPI: %ld",
ret);
}
local_irq_restore(flags);
}
static void kvm_send_ipi_mask(const struct cpumask *mask, int vector)
{
__send_ipi_mask(mask, vector);
}
static void kvm_send_ipi_mask_allbutself(const struct cpumask *mask, int vector)
{
unsigned int this_cpu = smp_processor_id();
struct cpumask *new_mask = this_cpu_cpumask_var_ptr(__pv_cpu_mask);
const struct cpumask *local_mask;
cpumask_copy(new_mask, mask);
cpumask_clear_cpu(this_cpu, new_mask);
local_mask = new_mask;
__send_ipi_mask(local_mask, vector);
}
static int __init setup_efi_kvm_sev_migration(void)
{
efi_char16_t efi_sev_live_migration_enabled[] = L"SevLiveMigrationEnabled";
efi_guid_t efi_variable_guid = AMD_SEV_MEM_ENCRYPT_GUID;
efi_status_t status;
unsigned long size;
bool enabled;
if (!cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT) ||
!kvm_para_has_feature(KVM_FEATURE_MIGRATION_CONTROL))
return 0;
if (!efi_enabled(EFI_BOOT))
return 0;
if (!efi_enabled(EFI_RUNTIME_SERVICES)) {
pr_info("%s : EFI runtime services are not enabled\n", __func__);
return 0;
}
size = sizeof(enabled);
/* Get variable contents into buffer */
status = efi.get_variable(efi_sev_live_migration_enabled,
&efi_variable_guid, NULL, &size, &enabled);
if (status == EFI_NOT_FOUND) {
pr_info("%s : EFI live migration variable not found\n", __func__);
return 0;
}
if (status != EFI_SUCCESS) {
pr_info("%s : EFI variable retrieval failed\n", __func__);
return 0;
}
if (enabled == 0) {
pr_info("%s: live migration disabled in EFI\n", __func__);
return 0;
}
pr_info("%s : live migration enabled in EFI\n", __func__);
wrmsrl(MSR_KVM_MIGRATION_CONTROL, KVM_MIGRATION_READY);
return 1;
}
late_initcall(setup_efi_kvm_sev_migration);
/*
* Set the IPI entry points
*/
static void kvm_setup_pv_ipi(void)
{
apic->send_IPI_mask = kvm_send_ipi_mask;
apic->send_IPI_mask_allbutself = kvm_send_ipi_mask_allbutself;
pr_info("setup PV IPIs\n");
}
static void kvm_smp_send_call_func_ipi(const struct cpumask *mask)
{
int cpu;
native_send_call_func_ipi(mask);
/* Make sure other vCPUs get a chance to run if they need to. */
for_each_cpu(cpu, mask) {
if (!idle_cpu(cpu) && vcpu_is_preempted(cpu)) {
kvm_hypercall1(KVM_HC_SCHED_YIELD, per_cpu(x86_cpu_to_apicid, cpu));
break;
}
}
}
ARM: - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - Some selftests improvements -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+ Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY +2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ== =AXUi -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "This is a large update by KVM standards, including AMD PSP (Platform Security Processor, aka "AMD Secure Technology") and ARM CoreSight (debug and trace) changes. ARM: - CoreSight: Add support for ETE and TRBE - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - AMD PSP driver changes - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - a handful of "Get rid of oprofile leftovers" patches - Some selftests improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits) KVM: selftests: Speed up set_memory_region_test selftests: kvm: Fix the check of return value KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt() KVM: SVM: Skip SEV cache flush if no ASIDs have been used KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids() KVM: SVM: Drop redundant svm_sev_enabled() helper KVM: SVM: Move SEV VMCB tracking allocation to sev.c KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup() KVM: SVM: Unconditionally invoke sev_hardware_teardown() KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported) KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features KVM: SVM: Move SEV module params/variables to sev.c KVM: SVM: Disable SEV/SEV-ES if NPT is disabled KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails KVM: SVM: Zero out the VMCB array used to track SEV ASID association x86/sev: Drop redundant and potentially misleading 'sev_enabled' KVM: x86: Move reverse CPUID helpers to separate header file KVM: x86: Rename GPR accessors to make mode-aware variants the defaults ...
2021-05-01 17:14:08 +00:00
static void kvm_flush_tlb_multi(const struct cpumask *cpumask,
const struct flush_tlb_info *info)
{
u8 state;
int cpu;
struct kvm_steal_time *src;
struct cpumask *flushmask = this_cpu_cpumask_var_ptr(__pv_cpu_mask);
cpumask_copy(flushmask, cpumask);
/*
* We have to call flush only on online vCPUs. And
* queue flush_on_enter for pre-empted vCPUs
*/
for_each_cpu(cpu, flushmask) {
ARM: - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - Some selftests improvements -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+ Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY +2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ== =AXUi -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "This is a large update by KVM standards, including AMD PSP (Platform Security Processor, aka "AMD Secure Technology") and ARM CoreSight (debug and trace) changes. ARM: - CoreSight: Add support for ETE and TRBE - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - AMD PSP driver changes - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - a handful of "Get rid of oprofile leftovers" patches - Some selftests improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits) KVM: selftests: Speed up set_memory_region_test selftests: kvm: Fix the check of return value KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt() KVM: SVM: Skip SEV cache flush if no ASIDs have been used KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids() KVM: SVM: Drop redundant svm_sev_enabled() helper KVM: SVM: Move SEV VMCB tracking allocation to sev.c KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup() KVM: SVM: Unconditionally invoke sev_hardware_teardown() KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported) KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features KVM: SVM: Move SEV module params/variables to sev.c KVM: SVM: Disable SEV/SEV-ES if NPT is disabled KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails KVM: SVM: Zero out the VMCB array used to track SEV ASID association x86/sev: Drop redundant and potentially misleading 'sev_enabled' KVM: x86: Move reverse CPUID helpers to separate header file KVM: x86: Rename GPR accessors to make mode-aware variants the defaults ...
2021-05-01 17:14:08 +00:00
/*
* The local vCPU is never preempted, so we do not explicitly
* skip check for local vCPU - it will never be cleared from
* flushmask.
*/
src = &per_cpu(steal_time, cpu);
state = READ_ONCE(src->preempted);
if ((state & KVM_VCPU_PREEMPTED)) {
if (try_cmpxchg(&src->preempted, &state,
state | KVM_VCPU_FLUSH_TLB))
__cpumask_clear_cpu(cpu, flushmask);
}
}
ARM: - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - Some selftests improvements -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+ Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY +2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ== =AXUi -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "This is a large update by KVM standards, including AMD PSP (Platform Security Processor, aka "AMD Secure Technology") and ARM CoreSight (debug and trace) changes. ARM: - CoreSight: Add support for ETE and TRBE - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - AMD PSP driver changes - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - a handful of "Get rid of oprofile leftovers" patches - Some selftests improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits) KVM: selftests: Speed up set_memory_region_test selftests: kvm: Fix the check of return value KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt() KVM: SVM: Skip SEV cache flush if no ASIDs have been used KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids() KVM: SVM: Drop redundant svm_sev_enabled() helper KVM: SVM: Move SEV VMCB tracking allocation to sev.c KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup() KVM: SVM: Unconditionally invoke sev_hardware_teardown() KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported) KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features KVM: SVM: Move SEV module params/variables to sev.c KVM: SVM: Disable SEV/SEV-ES if NPT is disabled KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails KVM: SVM: Zero out the VMCB array used to track SEV ASID association x86/sev: Drop redundant and potentially misleading 'sev_enabled' KVM: x86: Move reverse CPUID helpers to separate header file KVM: x86: Rename GPR accessors to make mode-aware variants the defaults ...
2021-05-01 17:14:08 +00:00
native_flush_tlb_multi(flushmask, info);
}
static __init int kvm_alloc_cpumask(void)
{
int cpu;
if (!kvm_para_available() || nopv)
return 0;
if (pv_tlb_flush_supported() || pv_ipi_supported())
for_each_possible_cpu(cpu) {
zalloc_cpumask_var_node(per_cpu_ptr(&__pv_cpu_mask, cpu),
GFP_KERNEL, cpu_to_node(cpu));
}
return 0;
}
arch_initcall(kvm_alloc_cpumask);
static void __init kvm_smp_prepare_boot_cpu(void)
{
/*
* Map the per-cpu variables as decrypted before kvm_guest_cpu_init()
* shares the guest physical address with the hypervisor.
*/
sev_map_percpu_data();
kvm_guest_cpu_init();
native_smp_prepare_boot_cpu();
kvm_spinlock_init();
}
static int kvm_cpu_down_prepare(unsigned int cpu)
{
unsigned long flags;
local_irq_save(flags);
kvm_guest_cpu_offline(false);
local_irq_restore(flags);
return 0;
}
#endif
static int kvm_suspend(void)
{
u64 val = 0;
kvm_guest_cpu_offline(false);
#ifdef CONFIG_ARCH_CPUIDLE_HALTPOLL
if (kvm_para_has_feature(KVM_FEATURE_POLL_CONTROL))
rdmsrl(MSR_KVM_POLL_CONTROL, val);
has_guest_poll = !(val & 1);
#endif
return 0;
}
static void kvm_resume(void)
{
kvm_cpu_online(raw_smp_processor_id());
#ifdef CONFIG_ARCH_CPUIDLE_HALTPOLL
if (kvm_para_has_feature(KVM_FEATURE_POLL_CONTROL) && has_guest_poll)
wrmsrl(MSR_KVM_POLL_CONTROL, 0);
#endif
}
static struct syscore_ops kvm_syscore_ops = {
.suspend = kvm_suspend,
.resume = kvm_resume,
};
static void kvm_pv_guest_cpu_reboot(void *unused)
{
kvm_guest_cpu_offline(true);
}
static int kvm_pv_reboot_notify(struct notifier_block *nb,
unsigned long code, void *unused)
{
if (code == SYS_RESTART)
on_each_cpu(kvm_pv_guest_cpu_reboot, NULL, 1);
return NOTIFY_DONE;
}
static struct notifier_block kvm_pv_reboot_nb = {
.notifier_call = kvm_pv_reboot_notify,
};
/*
* After a PV feature is registered, the host will keep writing to the
* registered memory location. If the guest happens to shutdown, this memory
* won't be valid. In cases like kexec, in which you install a new kernel, this
* means a random memory location will be kept being written.
*/
#ifdef CONFIG_KEXEC_CORE
static void kvm_crash_shutdown(struct pt_regs *regs)
{
kvm_guest_cpu_offline(true);
native_machine_crash_shutdown(regs);
}
#endif
KVM: x86: Support the vCPU preemption check with nopvspin and realtime hint If guest kernel is configured with nopvspin, or CONFIG_PARAVIRT_SPINLOCK is disabled, or guest find its has dedicated pCPUs from realtime hint feature, the pvspinlock will be disabled, and vCPU preemption check is disabled too. Hoever, KVM still can emulating HLT for vCPU for both cases. Checking if a vCPU is preempted or not can still boost performance in IPI-heavy scenarios such as unixbench file copy and pipe-based context switching tests: Here the vCPU is running with a dedicated pCPU, so the guest kernel has nopvspin but is emulating HLT for the vCPU: Testcase Base with patch System Benchmarks Index Values INDEX INDEX Dhrystone 2 using register variables 3278.4 3277.7 Double-Precision Whetstone 822.8 825.8 Execl Throughput 1296.5 941.1 File Copy 1024 bufsize 2000 maxblocks 2124.2 2142.7 File Copy 256 bufsize 500 maxblocks 1335.9 1353.6 File Copy 4096 bufsize 8000 maxblocks 4256.3 4760.3 Pipe Throughput 1050.1 1054.0 Pipe-based Context Switching 243.3 352.0 Process Creation 820.1 814.4 Shell Scripts (1 concurrent) 2169.0 2086.0 Shell Scripts (8 concurrent) 7710.3 7576.3 System Call Overhead 672.4 673.9 ======== ======= System Benchmarks Index Score 1467.2 1483.0 Move the setting of pv_ops.lock.vcpu_is_preempted to kvm_guest_init, so that it does not depend on pvspinlock. Signed-off-by: Li RongQing <lirongqing@baidu.com> Message-Id: <1646815610-43315-1-git-send-email-lirongqing@baidu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-09 08:46:50 +00:00
#if defined(CONFIG_X86_32) || !defined(CONFIG_SMP)
bool __kvm_vcpu_is_preempted(long cpu);
__visible bool __kvm_vcpu_is_preempted(long cpu)
{
struct kvm_steal_time *src = &per_cpu(steal_time, cpu);
return !!(src->preempted & KVM_VCPU_PREEMPTED);
}
PV_CALLEE_SAVE_REGS_THUNK(__kvm_vcpu_is_preempted);
#else
#include <asm/asm-offsets.h>
extern bool __raw_callee_save___kvm_vcpu_is_preempted(long);
/*
* Hand-optimize version for x86-64 to avoid 8 64-bit register saving and
* restoring to/from the stack.
*/
#define PV_VCPU_PREEMPTED_ASM \
"movq __per_cpu_offset(,%rdi,8), %rax\n\t" \
"cmpb $0, " __stringify(KVM_STEAL_TIME_preempted) "+steal_time(%rax)\n\t" \
"setne %al\n\t"
KVM: x86: Support the vCPU preemption check with nopvspin and realtime hint If guest kernel is configured with nopvspin, or CONFIG_PARAVIRT_SPINLOCK is disabled, or guest find its has dedicated pCPUs from realtime hint feature, the pvspinlock will be disabled, and vCPU preemption check is disabled too. Hoever, KVM still can emulating HLT for vCPU for both cases. Checking if a vCPU is preempted or not can still boost performance in IPI-heavy scenarios such as unixbench file copy and pipe-based context switching tests: Here the vCPU is running with a dedicated pCPU, so the guest kernel has nopvspin but is emulating HLT for the vCPU: Testcase Base with patch System Benchmarks Index Values INDEX INDEX Dhrystone 2 using register variables 3278.4 3277.7 Double-Precision Whetstone 822.8 825.8 Execl Throughput 1296.5 941.1 File Copy 1024 bufsize 2000 maxblocks 2124.2 2142.7 File Copy 256 bufsize 500 maxblocks 1335.9 1353.6 File Copy 4096 bufsize 8000 maxblocks 4256.3 4760.3 Pipe Throughput 1050.1 1054.0 Pipe-based Context Switching 243.3 352.0 Process Creation 820.1 814.4 Shell Scripts (1 concurrent) 2169.0 2086.0 Shell Scripts (8 concurrent) 7710.3 7576.3 System Call Overhead 672.4 673.9 ======== ======= System Benchmarks Index Score 1467.2 1483.0 Move the setting of pv_ops.lock.vcpu_is_preempted to kvm_guest_init, so that it does not depend on pvspinlock. Signed-off-by: Li RongQing <lirongqing@baidu.com> Message-Id: <1646815610-43315-1-git-send-email-lirongqing@baidu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-09 08:46:50 +00:00
DEFINE_PARAVIRT_ASM(__raw_callee_save___kvm_vcpu_is_preempted,
PV_VCPU_PREEMPTED_ASM, .text);
KVM: x86: Support the vCPU preemption check with nopvspin and realtime hint If guest kernel is configured with nopvspin, or CONFIG_PARAVIRT_SPINLOCK is disabled, or guest find its has dedicated pCPUs from realtime hint feature, the pvspinlock will be disabled, and vCPU preemption check is disabled too. Hoever, KVM still can emulating HLT for vCPU for both cases. Checking if a vCPU is preempted or not can still boost performance in IPI-heavy scenarios such as unixbench file copy and pipe-based context switching tests: Here the vCPU is running with a dedicated pCPU, so the guest kernel has nopvspin but is emulating HLT for the vCPU: Testcase Base with patch System Benchmarks Index Values INDEX INDEX Dhrystone 2 using register variables 3278.4 3277.7 Double-Precision Whetstone 822.8 825.8 Execl Throughput 1296.5 941.1 File Copy 1024 bufsize 2000 maxblocks 2124.2 2142.7 File Copy 256 bufsize 500 maxblocks 1335.9 1353.6 File Copy 4096 bufsize 8000 maxblocks 4256.3 4760.3 Pipe Throughput 1050.1 1054.0 Pipe-based Context Switching 243.3 352.0 Process Creation 820.1 814.4 Shell Scripts (1 concurrent) 2169.0 2086.0 Shell Scripts (8 concurrent) 7710.3 7576.3 System Call Overhead 672.4 673.9 ======== ======= System Benchmarks Index Score 1467.2 1483.0 Move the setting of pv_ops.lock.vcpu_is_preempted to kvm_guest_init, so that it does not depend on pvspinlock. Signed-off-by: Li RongQing <lirongqing@baidu.com> Message-Id: <1646815610-43315-1-git-send-email-lirongqing@baidu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-09 08:46:50 +00:00
#endif
static void __init kvm_guest_init(void)
{
int i;
paravirt_ops_setup();
register_reboot_notifier(&kvm_pv_reboot_nb);
for (i = 0; i < KVM_TASK_SLEEP_HASHSIZE; i++)
raw_spin_lock_init(&async_pf_sleepers[i].lock);
if (kvm_para_has_feature(KVM_FEATURE_STEAL_TIME)) {
has_steal_clock = 1;
static_call_update(pv_steal_clock, kvm_steal_clock);
KVM: x86: Support the vCPU preemption check with nopvspin and realtime hint If guest kernel is configured with nopvspin, or CONFIG_PARAVIRT_SPINLOCK is disabled, or guest find its has dedicated pCPUs from realtime hint feature, the pvspinlock will be disabled, and vCPU preemption check is disabled too. Hoever, KVM still can emulating HLT for vCPU for both cases. Checking if a vCPU is preempted or not can still boost performance in IPI-heavy scenarios such as unixbench file copy and pipe-based context switching tests: Here the vCPU is running with a dedicated pCPU, so the guest kernel has nopvspin but is emulating HLT for the vCPU: Testcase Base with patch System Benchmarks Index Values INDEX INDEX Dhrystone 2 using register variables 3278.4 3277.7 Double-Precision Whetstone 822.8 825.8 Execl Throughput 1296.5 941.1 File Copy 1024 bufsize 2000 maxblocks 2124.2 2142.7 File Copy 256 bufsize 500 maxblocks 1335.9 1353.6 File Copy 4096 bufsize 8000 maxblocks 4256.3 4760.3 Pipe Throughput 1050.1 1054.0 Pipe-based Context Switching 243.3 352.0 Process Creation 820.1 814.4 Shell Scripts (1 concurrent) 2169.0 2086.0 Shell Scripts (8 concurrent) 7710.3 7576.3 System Call Overhead 672.4 673.9 ======== ======= System Benchmarks Index Score 1467.2 1483.0 Move the setting of pv_ops.lock.vcpu_is_preempted to kvm_guest_init, so that it does not depend on pvspinlock. Signed-off-by: Li RongQing <lirongqing@baidu.com> Message-Id: <1646815610-43315-1-git-send-email-lirongqing@baidu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-09 08:46:50 +00:00
pv_ops.lock.vcpu_is_preempted =
PV_CALLEE_SAVE(__kvm_vcpu_is_preempted);
}
if (kvm_para_has_feature(KVM_FEATURE_PV_EOI))
apic_set_eoi_write(kvm_guest_apic_eoi_write);
KVM guest: guest side for eoi avoidance The idea is simple: there's a bit, per APIC, in guest memory, that tells the guest that it does not need EOI. Guest tests it using a single est and clear operation - this is necessary so that host can detect interrupt nesting - and if set, it can skip the EOI MSR. I run a simple microbenchmark to show exit reduction (note: for testing, need to apply follow-up patch 'kvm: host side for eoi optimization' + a qemu patch I posted separately, on host): Before: Performance counter stats for 'sleep 1s': 47,357 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 5,001 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 22,124 kvm:kvm_apic [99.98%] 49,849 kvm:kvm_exit [99.98%] 21,115 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 22,937 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.98%] 22,207 kvm:kvm_apic_accept_irq [99.98%] 22,421 kvm:kvm_eoi [99.98%] 0 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 57 kvm:kvm_emulate_insn [99.99%] 0 kvm:vcpu_match_mmio [99.99%] 0 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 23,609 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [99.99%] 226 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002100578 seconds time elapsed After: Performance counter stats for 'sleep 1s': 28,354 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 1,347 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 1,931 kvm:kvm_apic [99.98%] 29,595 kvm:kvm_exit [99.98%] 24,884 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 1,986 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.99%] 25,953 kvm:kvm_apic_accept_irq [99.99%] 26,132 kvm:kvm_eoi [99.99%] 26,593 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 284 kvm:kvm_emulate_insn [99.99%] 68 kvm:vcpu_match_mmio [99.99%] 68 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 28,288 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [100.00%] 588 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002039622 seconds time elapsed We see that # of exits is almost halved. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-24 16:24:34 +00:00
if (kvm_para_has_feature(KVM_FEATURE_ASYNC_PF_INT) && kvmapf) {
static_branch_enable(&kvm_async_pf_enabled);
alloc_intr_gate(HYPERVISOR_CALLBACK_VECTOR, asm_sysvec_kvm_asyncpf_interrupt);
}
#ifdef CONFIG_SMP
if (pv_tlb_flush_supported()) {
ARM: - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - Some selftests improvements -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+ Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY +2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ== =AXUi -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "This is a large update by KVM standards, including AMD PSP (Platform Security Processor, aka "AMD Secure Technology") and ARM CoreSight (debug and trace) changes. ARM: - CoreSight: Add support for ETE and TRBE - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - AMD PSP driver changes - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - a handful of "Get rid of oprofile leftovers" patches - Some selftests improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits) KVM: selftests: Speed up set_memory_region_test selftests: kvm: Fix the check of return value KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt() KVM: SVM: Skip SEV cache flush if no ASIDs have been used KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids() KVM: SVM: Drop redundant svm_sev_enabled() helper KVM: SVM: Move SEV VMCB tracking allocation to sev.c KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup() KVM: SVM: Unconditionally invoke sev_hardware_teardown() KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported) KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features KVM: SVM: Move SEV module params/variables to sev.c KVM: SVM: Disable SEV/SEV-ES if NPT is disabled KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails KVM: SVM: Zero out the VMCB array used to track SEV ASID association x86/sev: Drop redundant and potentially misleading 'sev_enabled' KVM: x86: Move reverse CPUID helpers to separate header file KVM: x86: Rename GPR accessors to make mode-aware variants the defaults ...
2021-05-01 17:14:08 +00:00
pv_ops.mmu.flush_tlb_multi = kvm_flush_tlb_multi;
pv_ops.mmu.tlb_remove_table = tlb_remove_table;
pr_info("KVM setup pv remote TLB flush\n");
}
smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu;
if (pv_sched_yield_supported()) {
smp_ops.send_call_func_ipi = kvm_smp_send_call_func_ipi;
pr_info("setup PV sched yield\n");
}
if (cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "x86/kvm:online",
kvm_cpu_online, kvm_cpu_down_prepare) < 0)
pr_err("failed to install cpu hotplug callbacks\n");
#else
sev_map_percpu_data();
kvm_guest_cpu_init();
#endif
#ifdef CONFIG_KEXEC_CORE
machine_ops.crash_shutdown = kvm_crash_shutdown;
#endif
register_syscore_ops(&kvm_syscore_ops);
/*
* Hard lockup detection is enabled by default. Disable it, as guests
* can get false positives too easily, for example if the host is
* overcommitted.
*/
hardlockup_detector_disable();
}
static noinline uint32_t __kvm_cpuid_base(void)
{
if (boot_cpu_data.cpuid_level < 0)
return 0; /* So we don't blow up on old processors */
if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
return hypervisor_cpuid_base(KVM_SIGNATURE, 0);
return 0;
}
static inline uint32_t kvm_cpuid_base(void)
{
static int kvm_cpuid_base = -1;
if (kvm_cpuid_base == -1)
kvm_cpuid_base = __kvm_cpuid_base();
return kvm_cpuid_base;
}
bool kvm_para_available(void)
{
return kvm_cpuid_base() != 0;
}
EXPORT_SYMBOL_GPL(kvm_para_available);
unsigned int kvm_arch_para_features(void)
{
return cpuid_eax(kvm_cpuid_base() | KVM_CPUID_FEATURES);
}
unsigned int kvm_arch_para_hints(void)
{
return cpuid_edx(kvm_cpuid_base() | KVM_CPUID_FEATURES);
}
EXPORT_SYMBOL_GPL(kvm_arch_para_hints);
static uint32_t __init kvm_detect(void)
{
return kvm_cpuid_base();
}
static void __init kvm_apic_init(void)
{
#ifdef CONFIG_SMP
if (pv_ipi_supported())
kvm_setup_pv_ipi();
#endif
}
static bool __init kvm_msi_ext_dest_id(void)
{
return kvm_para_has_feature(KVM_FEATURE_MSI_EXT_DEST_ID);
}
static void kvm_sev_hc_page_enc_status(unsigned long pfn, int npages, bool enc)
{
kvm_sev_hypercall3(KVM_HC_MAP_GPA_RANGE, pfn << PAGE_SHIFT, npages,
KVM_MAP_GPA_RANGE_ENC_STAT(enc) | KVM_MAP_GPA_RANGE_PAGE_SZ_4K);
}
static void __init kvm_init_platform(void)
{
if (cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT) &&
kvm_para_has_feature(KVM_FEATURE_MIGRATION_CONTROL)) {
unsigned long nr_pages;
int i;
pv_ops.mmu.notify_page_enc_status_changed =
kvm_sev_hc_page_enc_status;
/*
* Reset the host's shared pages list related to kernel
* specific page encryption status settings before we load a
* new kernel by kexec. Reset the page encryption status
* during early boot intead of just before kexec to avoid SMP
* races during kvm_pv_guest_cpu_reboot().
* NOTE: We cannot reset the complete shared pages list
* here as we need to retain the UEFI/OVMF firmware
* specific settings.
*/
for (i = 0; i < e820_table->nr_entries; i++) {
struct e820_entry *entry = &e820_table->entries[i];
if (entry->type != E820_TYPE_RAM)
continue;
nr_pages = DIV_ROUND_UP(entry->size, PAGE_SIZE);
kvm_sev_hypercall3(KVM_HC_MAP_GPA_RANGE, entry->addr,
nr_pages,
KVM_MAP_GPA_RANGE_ENCRYPTED | KVM_MAP_GPA_RANGE_PAGE_SZ_4K);
}
/*
* Ensure that _bss_decrypted section is marked as decrypted in the
* shared pages list.
*/
nr_pages = DIV_ROUND_UP(__end_bss_decrypted - __start_bss_decrypted,
PAGE_SIZE);
early_set_mem_enc_dec_hypercall((unsigned long)__start_bss_decrypted,
nr_pages, 0);
/*
* If not booted using EFI, enable Live migration support.
*/
if (!efi_enabled(EFI_BOOT))
wrmsrl(MSR_KVM_MIGRATION_CONTROL,
KVM_MIGRATION_READY);
}
Minor code cleanups for PPC. For x86 this brings in PCID emulation and CR3 caching for shadow page tables, nested VMX live migration, nested VMCS shadowing, an optimized IPI hypercall, and some optimizations. ARM will come next week. There is a semantic conflict because tip also added an .init_platform callback to kvm.c. Please keep the initializer from this branch, and add a call to kvmclock_init (added by tip) inside kvm_init_platform (added here). Also, there is a backmerge from 4.18-rc6. This is because of a refactoring that conflicted with a relatively late bugfix and resulted in a particularly hellish conflict. Because the conflict was only due to unfortunate timing of the bugfix, I backmerged and rebased the refactoring rather than force the resolution on you. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQEcBAABAgAGBQJbdwNFAAoJEL/70l94x66DiPEH/1cAGZWGd85Y3yRu1dmTmqiz kZy0V+WTQ5kyJF4ZsZKKOp+xK7Qxh5e9kLdTo70uPZCHwLu9IaGKN9+dL9Jar3DR yLPX5bMsL8UUed9g9mlhdaNOquWi7d7BseCOnIyRTolb+cqnM5h3sle0gqXloVrS UQb4QogDz8+86czqR8tNfazjQRKW/D2HEGD5NDNVY1qtpY+leCDAn9/u6hUT5c6z EtufgyDh35UN+UQH0e2605gt3nN3nw3FiQJFwFF1bKeQ7k5ByWkuGQI68XtFVhs+ 2WfqL3ftERkKzUOy/WoSJX/C9owvhMcpAuHDGOIlFwguNGroZivOMVnACG1AI3I= =9Mgw -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull first set of KVM updates from Paolo Bonzini: "PPC: - minor code cleanups x86: - PCID emulation and CR3 caching for shadow page tables - nested VMX live migration - nested VMCS shadowing - optimized IPI hypercall - some optimizations ARM will come next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (85 commits) kvm: x86: Set highest physical address bits in non-present/reserved SPTEs KVM/x86: Use CC_SET()/CC_OUT in arch/x86/kvm/vmx.c KVM: X86: Implement PV IPIs in linux guest KVM: X86: Add kvm hypervisor init time platform setup callback KVM: X86: Implement "send IPI" hypercall KVM/x86: Move X86_CR4_OSXSAVE check into kvm_valid_sregs() KVM: x86: Skip pae_root shadow allocation if tdp enabled KVM/MMU: Combine flushing remote tlb in mmu_set_spte() KVM: vmx: skip VMWRITE of HOST_{FS,GS}_BASE when possible KVM: vmx: skip VMWRITE of HOST_{FS,GS}_SEL when possible KVM: vmx: always initialize HOST_{FS,GS}_BASE to zero during setup KVM: vmx: move struct host_state usage to struct loaded_vmcs KVM: vmx: compute need to reload FS/GS/LDT on demand KVM: nVMX: remove a misleading comment regarding vmcs02 fields KVM: vmx: rename __vmx_load_host_state() and vmx_save_host_state() KVM: vmx: add dedicated utility to access guest's kernel_gs_base KVM: vmx: track host_state.loaded using a loaded_vmcs pointer KVM: vmx: refactor segmentation code in vmx_save_host_state() kvm: nVMX: Fix fault priority for VMX operations kvm: nVMX: Fix fault vector for VMX operation at CPL > 0 ...
2018-08-19 17:38:36 +00:00
kvmclock_init();
x86_platform.apic_post_init = kvm_apic_init;
}
#if defined(CONFIG_AMD_MEM_ENCRYPT)
static void kvm_sev_es_hcall_prepare(struct ghcb *ghcb, struct pt_regs *regs)
{
/* RAX and CPL are already in the GHCB */
ghcb_set_rbx(ghcb, regs->bx);
ghcb_set_rcx(ghcb, regs->cx);
ghcb_set_rdx(ghcb, regs->dx);
ghcb_set_rsi(ghcb, regs->si);
}
static bool kvm_sev_es_hcall_finish(struct ghcb *ghcb, struct pt_regs *regs)
{
/* No checking of the return state needed */
return true;
}
#endif
const __initconst struct hypervisor_x86 x86_hyper_kvm = {
.name = "KVM",
.detect = kvm_detect,
.type = X86_HYPER_KVM,
.init.guest_late_init = kvm_guest_init,
.init.x2apic_available = kvm_para_available,
.init.msi_ext_dest_id = kvm_msi_ext_dest_id,
.init.init_platform = kvm_init_platform,
#if defined(CONFIG_AMD_MEM_ENCRYPT)
.runtime.sev_es_hcall_prepare = kvm_sev_es_hcall_prepare,
.runtime.sev_es_hcall_finish = kvm_sev_es_hcall_finish,
#endif
};
static __init int activate_jump_labels(void)
{
if (has_steal_clock) {
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 07:31:31 +00:00
static_key_slow_inc(&paravirt_steal_enabled);
if (steal_acc)
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 07:31:31 +00:00
static_key_slow_inc(&paravirt_steal_rq_enabled);
}
return 0;
}
arch_initcall(activate_jump_labels);
#ifdef CONFIG_PARAVIRT_SPINLOCKS
/* Kick a cpu by its apicid. Used to wake up a halted vcpu */
static void kvm_kick_cpu(int cpu)
{
int apicid;
unsigned long flags = 0;
apicid = per_cpu(x86_cpu_to_apicid, cpu);
kvm_hypercall2(KVM_HC_KICK_CPU, flags, apicid);
}
#include <asm/qspinlock.h>
static void kvm_wait(u8 *ptr, u8 val)
{
if (in_nmi())
return;
/*
* halt until it's our turn and kicked. Note that we do safe halt
* for irq enabled case to avoid hang when lock info is overwritten
* in irq spinlock slowpath and no spurious interrupt occur to save us.
*/
x86/kvm: Fix broken irq restoration in kvm_wait After commit 997acaf6b4b59c (lockdep: report broken irq restoration), the guest splatting below during boot: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 1 PID: 169 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x26/0x30 Modules linked in: hid_generic usbhid hid CPU: 1 PID: 169 Comm: systemd-udevd Not tainted 5.11.0+ #25 RIP: 0010:warn_bogus_irq_restore+0x26/0x30 Call Trace: kvm_wait+0x76/0x90 __pv_queued_spin_lock_slowpath+0x285/0x2e0 do_raw_spin_lock+0xc9/0xd0 _raw_spin_lock+0x59/0x70 lockref_get_not_dead+0xf/0x50 __legitimize_path+0x31/0x60 legitimize_root+0x37/0x50 try_to_unlazy_next+0x7f/0x1d0 lookup_fast+0xb0/0x170 path_openat+0x165/0x9b0 do_filp_open+0x99/0x110 do_sys_openat2+0x1f1/0x2e0 do_sys_open+0x5c/0x80 __x64_sys_open+0x21/0x30 do_syscall_64+0x32/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae The new consistency checking, expects local_irq_save() and local_irq_restore() to be paired and sanely nested, and therefore expects local_irq_restore() to be called with irqs disabled. The irqflags handling in kvm_wait() which ends up doing: local_irq_save(flags); safe_halt(); local_irq_restore(flags); instead triggers it. This patch fixes it by using local_irq_disable()/enable() directly. Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1615791328-2735-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-15 06:55:28 +00:00
if (irqs_disabled()) {
if (READ_ONCE(*ptr) == val)
halt();
} else {
local_irq_disable();
/* safe_halt() will enable IRQ */
x86/kvm: Fix broken irq restoration in kvm_wait After commit 997acaf6b4b59c (lockdep: report broken irq restoration), the guest splatting below during boot: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 1 PID: 169 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x26/0x30 Modules linked in: hid_generic usbhid hid CPU: 1 PID: 169 Comm: systemd-udevd Not tainted 5.11.0+ #25 RIP: 0010:warn_bogus_irq_restore+0x26/0x30 Call Trace: kvm_wait+0x76/0x90 __pv_queued_spin_lock_slowpath+0x285/0x2e0 do_raw_spin_lock+0xc9/0xd0 _raw_spin_lock+0x59/0x70 lockref_get_not_dead+0xf/0x50 __legitimize_path+0x31/0x60 legitimize_root+0x37/0x50 try_to_unlazy_next+0x7f/0x1d0 lookup_fast+0xb0/0x170 path_openat+0x165/0x9b0 do_filp_open+0x99/0x110 do_sys_openat2+0x1f1/0x2e0 do_sys_open+0x5c/0x80 __x64_sys_open+0x21/0x30 do_syscall_64+0x32/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae The new consistency checking, expects local_irq_save() and local_irq_restore() to be paired and sanely nested, and therefore expects local_irq_restore() to be called with irqs disabled. The irqflags handling in kvm_wait() which ends up doing: local_irq_save(flags); safe_halt(); local_irq_restore(flags); instead triggers it. This patch fixes it by using local_irq_disable()/enable() directly. Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1615791328-2735-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-15 06:55:28 +00:00
if (READ_ONCE(*ptr) == val)
safe_halt();
else
local_irq_enable();
x86/kvm: Fix broken irq restoration in kvm_wait After commit 997acaf6b4b59c (lockdep: report broken irq restoration), the guest splatting below during boot: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 1 PID: 169 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x26/0x30 Modules linked in: hid_generic usbhid hid CPU: 1 PID: 169 Comm: systemd-udevd Not tainted 5.11.0+ #25 RIP: 0010:warn_bogus_irq_restore+0x26/0x30 Call Trace: kvm_wait+0x76/0x90 __pv_queued_spin_lock_slowpath+0x285/0x2e0 do_raw_spin_lock+0xc9/0xd0 _raw_spin_lock+0x59/0x70 lockref_get_not_dead+0xf/0x50 __legitimize_path+0x31/0x60 legitimize_root+0x37/0x50 try_to_unlazy_next+0x7f/0x1d0 lookup_fast+0xb0/0x170 path_openat+0x165/0x9b0 do_filp_open+0x99/0x110 do_sys_openat2+0x1f1/0x2e0 do_sys_open+0x5c/0x80 __x64_sys_open+0x21/0x30 do_syscall_64+0x32/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae The new consistency checking, expects local_irq_save() and local_irq_restore() to be paired and sanely nested, and therefore expects local_irq_restore() to be called with irqs disabled. The irqflags handling in kvm_wait() which ends up doing: local_irq_save(flags); safe_halt(); local_irq_restore(flags); instead triggers it. This patch fixes it by using local_irq_disable()/enable() directly. Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1615791328-2735-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-15 06:55:28 +00:00
}
}
/*
* Setup pv_lock_ops to exploit KVM_FEATURE_PV_UNHALT if present.
*/
void __init kvm_spinlock_init(void)
{
/*
* In case host doesn't support KVM_FEATURE_PV_UNHALT there is still an
* advantage of keeping virt_spin_lock_key enabled: virt_spin_lock() is
* preferred over native qspinlock when vCPU is preempted.
*/
if (!kvm_para_has_feature(KVM_FEATURE_PV_UNHALT)) {
pr_info("PV spinlocks disabled, no host support\n");
return;
}
/*
* Disable PV spinlocks and use native qspinlock when dedicated pCPUs
* are available.
*/
if (kvm_para_has_hint(KVM_HINTS_REALTIME)) {
pr_info("PV spinlocks disabled with KVM_HINTS_REALTIME hints\n");
goto out;
}
if (num_possible_cpus() == 1) {
pr_info("PV spinlocks disabled, single CPU\n");
goto out;
}
if (nopvspin) {
pr_info("PV spinlocks disabled, forced by \"nopvspin\" parameter\n");
goto out;
}
pr_info("PV spinlocks enabled\n");
__pv_init_lock_hash();
pv_ops.lock.queued_spin_lock_slowpath = __pv_queued_spin_lock_slowpath;
pv_ops.lock.queued_spin_unlock =
PV_CALLEE_SAVE(__pv_queued_spin_unlock);
pv_ops.lock.wait = kvm_wait;
pv_ops.lock.kick = kvm_kick_cpu;
/*
* When PV spinlock is enabled which is preferred over
* virt_spin_lock(), virt_spin_lock_key's value is meaningless.
* Just disable it anyway.
*/
out:
static_branch_disable(&virt_spin_lock_key);
}
#endif /* CONFIG_PARAVIRT_SPINLOCKS */
#ifdef CONFIG_ARCH_CPUIDLE_HALTPOLL
static void kvm_disable_host_haltpoll(void *i)
{
wrmsrl(MSR_KVM_POLL_CONTROL, 0);
}
static void kvm_enable_host_haltpoll(void *i)
{
wrmsrl(MSR_KVM_POLL_CONTROL, 1);
}
void arch_haltpoll_enable(unsigned int cpu)
{
if (!kvm_para_has_feature(KVM_FEATURE_POLL_CONTROL)) {
pr_err_once("host does not support poll control\n");
pr_err_once("host upgrade recommended\n");
return;
}
/* Enable guest halt poll disables host halt poll */
smp_call_function_single(cpu, kvm_disable_host_haltpoll, NULL, 1);
}
EXPORT_SYMBOL_GPL(arch_haltpoll_enable);
void arch_haltpoll_disable(unsigned int cpu)
{
if (!kvm_para_has_feature(KVM_FEATURE_POLL_CONTROL))
return;
/* Disable guest halt poll enables host halt poll */
smp_call_function_single(cpu, kvm_enable_host_haltpoll, NULL, 1);
}
EXPORT_SYMBOL_GPL(arch_haltpoll_disable);
#endif