linux-stable/drivers/of/platform.c

825 lines
23 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
* <benh@kernel.crashing.org>
* and Arnd Bergmann, IBM Corp.
* Merged from powerpc/kernel/of_platform.c and
* sparc{,64}/kernel/of_device.c by Stephen Rothwell
*/
#define pr_fmt(fmt) "OF: " fmt
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/amba/bus.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include "of_private.h"
const struct of_device_id of_default_bus_match_table[] = {
{ .compatible = "simple-bus", },
{ .compatible = "simple-mfd", },
{ .compatible = "isa", },
#ifdef CONFIG_ARM_AMBA
{ .compatible = "arm,amba-bus", },
#endif /* CONFIG_ARM_AMBA */
{} /* Empty terminated list */
};
/**
* of_find_device_by_node - Find the platform_device associated with a node
* @np: Pointer to device tree node
*
* Takes a reference to the embedded struct device which needs to be dropped
* after use.
*
* Return: platform_device pointer, or NULL if not found
*/
struct platform_device *of_find_device_by_node(struct device_node *np)
{
struct device *dev;
drivers: Introduce device lookup variants by of_node Introduce wrappers for {bus/driver/class}_find_device() to locate devices by its of_node. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: devicetree@vger.kernel.org Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: linux-i2c@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-spi@vger.kernel.org Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: Alan Tull <atull@kernel.org> Cc: linux-fpga@vger.kernel.org Cc: Peter Rosin <peda@axentia.se> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Thor Thayer <thor.thayer@linux.intel.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Peter Rosin <peda@axentia.se> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> # I2C part Acked-by: Moritz Fischer <mdf@kernel.org> # For FPGA part Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20190723221838.12024-3-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-23 22:18:33 +00:00
dev = bus_find_device_by_of_node(&platform_bus_type, np);
return dev ? to_platform_device(dev) : NULL;
}
EXPORT_SYMBOL(of_find_device_by_node);
int of_device_add(struct platform_device *ofdev)
{
BUG_ON(ofdev->dev.of_node == NULL);
/* name and id have to be set so that the platform bus doesn't get
* confused on matching */
ofdev->name = dev_name(&ofdev->dev);
ofdev->id = PLATFORM_DEVID_NONE;
/*
* If this device has not binding numa node in devicetree, that is
* of_node_to_nid returns NUMA_NO_NODE. device_add will assume that this
* device is on the same node as the parent.
*/
set_dev_node(&ofdev->dev, of_node_to_nid(ofdev->dev.of_node));
return device_add(&ofdev->dev);
}
int of_device_register(struct platform_device *pdev)
{
device_initialize(&pdev->dev);
return of_device_add(pdev);
}
EXPORT_SYMBOL(of_device_register);
void of_device_unregister(struct platform_device *ofdev)
{
device_unregister(&ofdev->dev);
}
EXPORT_SYMBOL(of_device_unregister);
#ifdef CONFIG_OF_ADDRESS
static const struct of_device_id of_skipped_node_table[] = {
{ .compatible = "operating-points-v2", },
{} /* Empty terminated list */
};
/*
* The following routines scan a subtree and registers a device for
* each applicable node.
*
* Note: sparc doesn't use these routines because it has a different
* mechanism for creating devices from device tree nodes.
*/
/**
* of_device_make_bus_id - Use the device node data to assign a unique name
* @dev: pointer to device structure that is linked to a device tree node
*
* This routine will first try using the translated bus address to
* derive a unique name. If it cannot, then it will prepend names from
* parent nodes until a unique name can be derived.
*/
static void of_device_make_bus_id(struct device *dev)
{
struct device_node *node = dev->of_node;
const __be32 *reg;
u64 addr;
u32 mask;
/* Construct the name, using parent nodes if necessary to ensure uniqueness */
while (node->parent) {
/*
* If the address can be translated, then that is as much
* uniqueness as we need. Make it the first component and return
*/
reg = of_get_property(node, "reg", NULL);
if (reg && (addr = of_translate_address(node, reg)) != OF_BAD_ADDR) {
if (!of_property_read_u32(node, "mask", &mask))
dev_set_name(dev, dev_name(dev) ? "%llx.%x.%pOFn:%s" : "%llx.%x.%pOFn",
addr, ffs(mask) - 1, node, dev_name(dev));
else
dev_set_name(dev, dev_name(dev) ? "%llx.%pOFn:%s" : "%llx.%pOFn",
addr, node, dev_name(dev));
return;
}
/* format arguments only used if dev_name() resolves to NULL */
dev_set_name(dev, dev_name(dev) ? "%s:%s" : "%s",
kbasename(node->full_name), dev_name(dev));
node = node->parent;
}
}
/**
* of_device_alloc - Allocate and initialize an of_device
* @np: device node to assign to device
* @bus_id: Name to assign to the device. May be null to use default name.
* @parent: Parent device.
*/
struct platform_device *of_device_alloc(struct device_node *np,
const char *bus_id,
struct device *parent)
{
struct platform_device *dev;
int rc, i, num_reg = 0;
struct resource *res;
dev = platform_device_alloc("", PLATFORM_DEVID_NONE);
if (!dev)
return NULL;
/* count the io resources */
num_reg = of_address_count(np);
/* Populate the resource table */
if (num_reg) {
res = kcalloc(num_reg, sizeof(*res), GFP_KERNEL);
if (!res) {
platform_device_put(dev);
return NULL;
}
dev->num_resources = num_reg;
dev->resource = res;
for (i = 0; i < num_reg; i++, res++) {
rc = of_address_to_resource(np, i, res);
WARN_ON(rc);
}
}
/* setup generic device info */
device_set_node(&dev->dev, of_fwnode_handle(of_node_get(np)));
dev->dev.parent = parent ? : &platform_bus;
if (bus_id)
dev_set_name(&dev->dev, "%s", bus_id);
else
of_device_make_bus_id(&dev->dev);
return dev;
}
EXPORT_SYMBOL(of_device_alloc);
/**
* of_platform_device_create_pdata - Alloc, initialize and register an of_device
* @np: pointer to node to create device for
* @bus_id: name to assign device
* @platform_data: pointer to populate platform_data pointer with
* @parent: Linux device model parent device.
*
* Return: Pointer to created platform device, or NULL if a device was not
* registered. Unavailable devices will not get registered.
*/
static struct platform_device *of_platform_device_create_pdata(
struct device_node *np,
const char *bus_id,
void *platform_data,
struct device *parent)
{
struct platform_device *dev;
if (!of_device_is_available(np) ||
of_node_test_and_set_flag(np, OF_POPULATED))
return NULL;
dev = of_device_alloc(np, bus_id, parent);
if (!dev)
goto err_clear_flag;
dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
if (!dev->dev.dma_mask)
dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
dev->dev.bus = &platform_bus_type;
dev->dev.platform_data = platform_data;
of_msi_configure(&dev->dev, dev->dev.of_node);
if (of_device_add(dev) != 0) {
platform_device_put(dev);
goto err_clear_flag;
}
return dev;
err_clear_flag:
of_node_clear_flag(np, OF_POPULATED);
return NULL;
}
/**
* of_platform_device_create - Alloc, initialize and register an of_device
* @np: pointer to node to create device for
* @bus_id: name to assign device
* @parent: Linux device model parent device.
*
* Return: Pointer to created platform device, or NULL if a device was not
* registered. Unavailable devices will not get registered.
*/
struct platform_device *of_platform_device_create(struct device_node *np,
const char *bus_id,
struct device *parent)
{
return of_platform_device_create_pdata(np, bus_id, NULL, parent);
}
EXPORT_SYMBOL(of_platform_device_create);
#ifdef CONFIG_ARM_AMBA
static struct amba_device *of_amba_device_create(struct device_node *node,
const char *bus_id,
void *platform_data,
struct device *parent)
{
struct amba_device *dev;
int ret;
pr_debug("Creating amba device %pOF\n", node);
if (!of_device_is_available(node) ||
of_node_test_and_set_flag(node, OF_POPULATED))
return NULL;
dev = amba_device_alloc(NULL, 0, 0);
if (!dev)
goto err_clear_flag;
of/platform: initialise AMBA default DMA masks This addresses a v4.19-rc1 regression in the PL111 DRM driver in drivers/gpu/pl111/* The driver uses the CMA KMS helpers and will thus at some point call down to dma_alloc_attrs() to allocate a chunk of contigous DMA memory for the framebuffer. It appears that in v4.18, it was OK that this (and other DMA mastering AMBA devices) left dev->coherent_dma_mask blank (zero). In v4.19-rc1 the WARN_ON_ONCE(dev && !dev->coherent_dma_mask) in dma_alloc_attrs() in include/linux/dma-mapping.h is triggered. The allocation later fails when get_coherent_dma_mask() is called from __dma_alloc() and __dma_alloc() returns NULL: drm-clcd-pl111 dev:20: coherent DMA mask is unset drm-clcd-pl111 dev:20: [drm:drm_fb_helper_fbdev_setup] *ERROR* Failed to set fbdev configuration It turns out that in commit 4d8bde883bfb ("OF: Don't set default coherent DMA mask") the OF core stops setting the default DMA mask on new devices, especially those lines of the patch: - if (!dev->coherent_dma_mask) - dev->coherent_dma_mask = DMA_BIT_MASK(32); Robin Murphy solved a similar problem in a5516219b102 ("of/platform: Initialise default DMA masks") by simply assigning dev.coherent_dma_mask and the dev.dma_mask to point to the same when creating devices from the device tree, and introducing the same code into the code path creating AMBA/PrimeCell devices solved my problem, graphics now come up. The code simply assumes that the device can access all of the system memory by setting the coherent DMA mask to 0xffffffff when creating a device from the device tree, which is crude, but seems to be what kernel v4.18 assumed. The AMBA PrimeCells do not differ between coherent and streaming DMA so we can just assign the same to any DMA mask. Possibly drivers should augment their coherent DMA mask in accordance with "dma-ranges" from the device tree if more finegranular masking is needed. Reported-by: Russell King <linux@armlinux.org.uk> Fixes: 4d8bde883bfb ("OF: Don't set default coherent DMA mask") Cc: Russell King <linux@armlinux.org.uk> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-08-31 14:13:07 +00:00
/* AMBA devices only support a single DMA mask */
dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
/* setup generic device info */
device_set_node(&dev->dev, of_fwnode_handle(of_node_get(node)));
dev->dev.parent = parent ? : &platform_bus;
dev->dev.platform_data = platform_data;
if (bus_id)
dev_set_name(&dev->dev, "%s", bus_id);
else
of_device_make_bus_id(&dev->dev);
/* Allow the HW Peripheral ID to be overridden */
of_property_read_u32(node, "arm,primecell-periphid", &dev->periphid);
ret = of_address_to_resource(node, 0, &dev->res);
if (ret) {
pr_err("amba: of_address_to_resource() failed (%d) for %pOF\n",
ret, node);
goto err_free;
}
ret = amba_device_add(dev, &iomem_resource);
if (ret) {
pr_err("amba_device_add() failed (%d) for %pOF\n",
ret, node);
goto err_free;
}
return dev;
err_free:
amba_device_put(dev);
err_clear_flag:
of_node_clear_flag(node, OF_POPULATED);
return NULL;
}
#else /* CONFIG_ARM_AMBA */
static struct amba_device *of_amba_device_create(struct device_node *node,
const char *bus_id,
void *platform_data,
struct device *parent)
{
return NULL;
}
#endif /* CONFIG_ARM_AMBA */
/*
* of_dev_lookup() - Given a device node, lookup the preferred Linux name
*/
static const struct of_dev_auxdata *of_dev_lookup(const struct of_dev_auxdata *lookup,
struct device_node *np)
{
const struct of_dev_auxdata *auxdata;
struct resource res;
int compatible = 0;
if (!lookup)
return NULL;
auxdata = lookup;
for (; auxdata->compatible; auxdata++) {
if (!of_device_is_compatible(np, auxdata->compatible))
continue;
compatible++;
if (!of_address_to_resource(np, 0, &res))
if (res.start != auxdata->phys_addr)
continue;
pr_debug("%pOF: devname=%s\n", np, auxdata->name);
return auxdata;
}
if (!compatible)
return NULL;
/* Try compatible match if no phys_addr and name are specified */
auxdata = lookup;
for (; auxdata->compatible; auxdata++) {
if (!of_device_is_compatible(np, auxdata->compatible))
continue;
if (!auxdata->phys_addr && !auxdata->name) {
pr_debug("%pOF: compatible match\n", np);
return auxdata;
}
}
return NULL;
}
/**
* of_platform_bus_create() - Create a device for a node and its children.
* @bus: device node of the bus to instantiate
* @matches: match table for bus nodes
* @lookup: auxdata table for matching id and platform_data with device nodes
* @parent: parent for new device, or NULL for top level.
* @strict: require compatible property
*
* Creates a platform_device for the provided device_node, and optionally
* recursively create devices for all the child nodes.
*/
static int of_platform_bus_create(struct device_node *bus,
const struct of_device_id *matches,
const struct of_dev_auxdata *lookup,
struct device *parent, bool strict)
{
const struct of_dev_auxdata *auxdata;
struct device_node *child;
struct platform_device *dev;
const char *bus_id = NULL;
void *platform_data = NULL;
int rc = 0;
/* Make sure it has a compatible property */
if (strict && (!of_get_property(bus, "compatible", NULL))) {
pr_debug("%s() - skipping %pOF, no compatible prop\n",
__func__, bus);
return 0;
}
/* Skip nodes for which we don't want to create devices */
if (unlikely(of_match_node(of_skipped_node_table, bus))) {
pr_debug("%s() - skipping %pOF node\n", __func__, bus);
return 0;
}
if (of_node_check_flag(bus, OF_POPULATED_BUS)) {
pr_debug("%s() - skipping %pOF, already populated\n",
__func__, bus);
return 0;
}
auxdata = of_dev_lookup(lookup, bus);
if (auxdata) {
bus_id = auxdata->name;
platform_data = auxdata->platform_data;
}
if (of_device_is_compatible(bus, "arm,primecell")) {
/*
* Don't return an error here to keep compatibility with older
* device tree files.
*/
of_amba_device_create(bus, bus_id, platform_data, parent);
return 0;
}
dev = of_platform_device_create_pdata(bus, bus_id, platform_data, parent);
if (!dev || !of_match_node(matches, bus))
return 0;
for_each_child_of_node(bus, child) {
pr_debug(" create child: %pOF\n", child);
rc = of_platform_bus_create(child, matches, lookup, &dev->dev, strict);
if (rc) {
of_node_put(child);
break;
}
}
of_node_set_flag(bus, OF_POPULATED_BUS);
return rc;
}
/**
* of_platform_bus_probe() - Probe the device-tree for platform buses
* @root: parent of the first level to probe or NULL for the root of the tree
* @matches: match table for bus nodes
* @parent: parent to hook devices from, NULL for toplevel
*
* Note that children of the provided root are not instantiated as devices
* unless the specified root itself matches the bus list and is not NULL.
*/
int of_platform_bus_probe(struct device_node *root,
const struct of_device_id *matches,
struct device *parent)
{
struct device_node *child;
int rc = 0;
root = root ? of_node_get(root) : of_find_node_by_path("/");
if (!root)
return -EINVAL;
pr_debug("%s()\n", __func__);
pr_debug(" starting at: %pOF\n", root);
/* Do a self check of bus type, if there's a match, create children */
if (of_match_node(matches, root)) {
rc = of_platform_bus_create(root, matches, NULL, parent, false);
} else for_each_child_of_node(root, child) {
if (!of_match_node(matches, child))
continue;
rc = of_platform_bus_create(child, matches, NULL, parent, false);
if (rc) {
of_node_put(child);
break;
}
}
of_node_put(root);
return rc;
}
EXPORT_SYMBOL(of_platform_bus_probe);
/**
* of_platform_populate() - Populate platform_devices from device tree data
* @root: parent of the first level to probe or NULL for the root of the tree
* @matches: match table, NULL to use the default
* @lookup: auxdata table for matching id and platform_data with device nodes
* @parent: parent to hook devices from, NULL for toplevel
*
* Similar to of_platform_bus_probe(), this function walks the device tree
* and creates devices from nodes. It differs in that it follows the modern
* convention of requiring all device nodes to have a 'compatible' property,
* and it is suitable for creating devices which are children of the root
* node (of_platform_bus_probe will only create children of the root which
* are selected by the @matches argument).
*
* New board support should be using this function instead of
* of_platform_bus_probe().
*
* Return: 0 on success, < 0 on failure.
*/
int of_platform_populate(struct device_node *root,
const struct of_device_id *matches,
const struct of_dev_auxdata *lookup,
struct device *parent)
{
struct device_node *child;
int rc = 0;
root = root ? of_node_get(root) : of_find_node_by_path("/");
if (!root)
return -EINVAL;
pr_debug("%s()\n", __func__);
pr_debug(" starting at: %pOF\n", root);
device_links_supplier_sync_state_pause();
for_each_child_of_node(root, child) {
rc = of_platform_bus_create(child, matches, lookup, parent, true);
if (rc) {
of_node_put(child);
break;
}
}
device_links_supplier_sync_state_resume();
of_node_set_flag(root, OF_POPULATED_BUS);
of_node_put(root);
return rc;
}
EXPORT_SYMBOL_GPL(of_platform_populate);
int of_platform_default_populate(struct device_node *root,
const struct of_dev_auxdata *lookup,
struct device *parent)
{
return of_platform_populate(root, of_default_bus_match_table, lookup,
parent);
}
EXPORT_SYMBOL_GPL(of_platform_default_populate);
static const struct of_device_id reserved_mem_matches[] = {
{ .compatible = "phram" },
{ .compatible = "qcom,rmtfs-mem" },
{ .compatible = "qcom,cmd-db" },
{ .compatible = "qcom,smem" },
{ .compatible = "ramoops" },
{ .compatible = "nvmem-rmem" },
{ .compatible = "google,open-dice" },
{}
};
static int __init of_platform_default_populate_init(void)
{
struct device_node *node;
device_links_supplier_sync_state_pause();
if (!of_have_populated_dt())
return -ENODEV;
of: Create platform devices for OF framebuffers Create a platform device for each OF-declared framebuffer and have offb bind to these devices. Allows for real hot-unplugging and other drivers besides offb. Originally, offb created framebuffer devices while initializing its module by parsing the OF device tree. No actual Linux device was set up. This tied OF framebuffers to offb and makes writing other drivers for the OF framebuffers complicated. The absence of a Linux device further prevented real hot-unplugging. Adding a distinct platform device for each OF framebuffer solves both problems. Specifically, a DRM driver can now provide graphics output for modern userspace. Some of the offb init code is now located in the OF initialization. There's now also an implementation of of_platform_default_populate_init(), which was missing before. The OF side creates different devices for either OF display nodes or BootX displays as they require different handling by the driver. The offb drivers picks up each type of device and runs the appropriate fbdev initialization. Tested with OF display nodes on qemu's ppc64le target. v3: * declare variable 'node' with function scope (Rob) v2: * run PPC code as part of existing initialization (Rob) * add a few more error warnings (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419100405.12600-2-tzimmermann@suse.de
2022-04-19 10:04:04 +00:00
if (IS_ENABLED(CONFIG_PPC)) {
struct device_node *boot_display = NULL;
struct platform_device *dev;
int display_number = 0;
of: Create platform devices for OF framebuffers Create a platform device for each OF-declared framebuffer and have offb bind to these devices. Allows for real hot-unplugging and other drivers besides offb. Originally, offb created framebuffer devices while initializing its module by parsing the OF device tree. No actual Linux device was set up. This tied OF framebuffers to offb and makes writing other drivers for the OF framebuffers complicated. The absence of a Linux device further prevented real hot-unplugging. Adding a distinct platform device for each OF framebuffer solves both problems. Specifically, a DRM driver can now provide graphics output for modern userspace. Some of the offb init code is now located in the OF initialization. There's now also an implementation of of_platform_default_populate_init(), which was missing before. The OF side creates different devices for either OF display nodes or BootX displays as they require different handling by the driver. The offb drivers picks up each type of device and runs the appropriate fbdev initialization. Tested with OF display nodes on qemu's ppc64le target. v3: * declare variable 'node' with function scope (Rob) v2: * run PPC code as part of existing initialization (Rob) * add a few more error warnings (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419100405.12600-2-tzimmermann@suse.de
2022-04-19 10:04:04 +00:00
int ret;
/* Check if we have a MacOS display without a node spec */
if (of_property_present(of_chosen, "linux,bootx-noscreen")) {
of: Create platform devices for OF framebuffers Create a platform device for each OF-declared framebuffer and have offb bind to these devices. Allows for real hot-unplugging and other drivers besides offb. Originally, offb created framebuffer devices while initializing its module by parsing the OF device tree. No actual Linux device was set up. This tied OF framebuffers to offb and makes writing other drivers for the OF framebuffers complicated. The absence of a Linux device further prevented real hot-unplugging. Adding a distinct platform device for each OF framebuffer solves both problems. Specifically, a DRM driver can now provide graphics output for modern userspace. Some of the offb init code is now located in the OF initialization. There's now also an implementation of of_platform_default_populate_init(), which was missing before. The OF side creates different devices for either OF display nodes or BootX displays as they require different handling by the driver. The offb drivers picks up each type of device and runs the appropriate fbdev initialization. Tested with OF display nodes on qemu's ppc64le target. v3: * declare variable 'node' with function scope (Rob) v2: * run PPC code as part of existing initialization (Rob) * add a few more error warnings (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419100405.12600-2-tzimmermann@suse.de
2022-04-19 10:04:04 +00:00
/*
* The old code tried to work out which node was the MacOS
* display based on the address. I'm dropping that since the
* lack of a node spec only happens with old BootX versions
* (users can update) and with this code, they'll still get
* a display (just not the palette hacks).
*/
dev = platform_device_alloc("bootx-noscreen", 0);
if (WARN_ON(!dev))
return -ENOMEM;
ret = platform_device_add(dev);
if (WARN_ON(ret)) {
platform_device_put(dev);
return ret;
}
}
of: Create platform devices for OF framebuffers Create a platform device for each OF-declared framebuffer and have offb bind to these devices. Allows for real hot-unplugging and other drivers besides offb. Originally, offb created framebuffer devices while initializing its module by parsing the OF device tree. No actual Linux device was set up. This tied OF framebuffers to offb and makes writing other drivers for the OF framebuffers complicated. The absence of a Linux device further prevented real hot-unplugging. Adding a distinct platform device for each OF framebuffer solves both problems. Specifically, a DRM driver can now provide graphics output for modern userspace. Some of the offb init code is now located in the OF initialization. There's now also an implementation of of_platform_default_populate_init(), which was missing before. The OF side creates different devices for either OF display nodes or BootX displays as they require different handling by the driver. The offb drivers picks up each type of device and runs the appropriate fbdev initialization. Tested with OF display nodes on qemu's ppc64le target. v3: * declare variable 'node' with function scope (Rob) v2: * run PPC code as part of existing initialization (Rob) * add a few more error warnings (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419100405.12600-2-tzimmermann@suse.de
2022-04-19 10:04:04 +00:00
/*
* For OF framebuffers, first create the device for the boot display,
* then for the other framebuffers. Only fail for the boot display;
* ignore errors for the rest.
*/
for_each_node_by_type(node, "display") {
if (!of_get_property(node, "linux,opened", NULL) ||
!of_get_property(node, "linux,boot-display", NULL))
continue;
dev = of_platform_device_create(node, "of-display", NULL);
of_node_put(node);
of: Create platform devices for OF framebuffers Create a platform device for each OF-declared framebuffer and have offb bind to these devices. Allows for real hot-unplugging and other drivers besides offb. Originally, offb created framebuffer devices while initializing its module by parsing the OF device tree. No actual Linux device was set up. This tied OF framebuffers to offb and makes writing other drivers for the OF framebuffers complicated. The absence of a Linux device further prevented real hot-unplugging. Adding a distinct platform device for each OF framebuffer solves both problems. Specifically, a DRM driver can now provide graphics output for modern userspace. Some of the offb init code is now located in the OF initialization. There's now also an implementation of of_platform_default_populate_init(), which was missing before. The OF side creates different devices for either OF display nodes or BootX displays as they require different handling by the driver. The offb drivers picks up each type of device and runs the appropriate fbdev initialization. Tested with OF display nodes on qemu's ppc64le target. v3: * declare variable 'node' with function scope (Rob) v2: * run PPC code as part of existing initialization (Rob) * add a few more error warnings (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419100405.12600-2-tzimmermann@suse.de
2022-04-19 10:04:04 +00:00
if (WARN_ON(!dev))
return -ENOMEM;
boot_display = node;
display_number++;
of: Create platform devices for OF framebuffers Create a platform device for each OF-declared framebuffer and have offb bind to these devices. Allows for real hot-unplugging and other drivers besides offb. Originally, offb created framebuffer devices while initializing its module by parsing the OF device tree. No actual Linux device was set up. This tied OF framebuffers to offb and makes writing other drivers for the OF framebuffers complicated. The absence of a Linux device further prevented real hot-unplugging. Adding a distinct platform device for each OF framebuffer solves both problems. Specifically, a DRM driver can now provide graphics output for modern userspace. Some of the offb init code is now located in the OF initialization. There's now also an implementation of of_platform_default_populate_init(), which was missing before. The OF side creates different devices for either OF display nodes or BootX displays as they require different handling by the driver. The offb drivers picks up each type of device and runs the appropriate fbdev initialization. Tested with OF display nodes on qemu's ppc64le target. v3: * declare variable 'node' with function scope (Rob) v2: * run PPC code as part of existing initialization (Rob) * add a few more error warnings (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419100405.12600-2-tzimmermann@suse.de
2022-04-19 10:04:04 +00:00
break;
}
for_each_node_by_type(node, "display") {
char buf[14];
const char *of_display_format = "of-display.%d";
of: Create platform devices for OF framebuffers Create a platform device for each OF-declared framebuffer and have offb bind to these devices. Allows for real hot-unplugging and other drivers besides offb. Originally, offb created framebuffer devices while initializing its module by parsing the OF device tree. No actual Linux device was set up. This tied OF framebuffers to offb and makes writing other drivers for the OF framebuffers complicated. The absence of a Linux device further prevented real hot-unplugging. Adding a distinct platform device for each OF framebuffer solves both problems. Specifically, a DRM driver can now provide graphics output for modern userspace. Some of the offb init code is now located in the OF initialization. There's now also an implementation of of_platform_default_populate_init(), which was missing before. The OF side creates different devices for either OF display nodes or BootX displays as they require different handling by the driver. The offb drivers picks up each type of device and runs the appropriate fbdev initialization. Tested with OF display nodes on qemu's ppc64le target. v3: * declare variable 'node' with function scope (Rob) v2: * run PPC code as part of existing initialization (Rob) * add a few more error warnings (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419100405.12600-2-tzimmermann@suse.de
2022-04-19 10:04:04 +00:00
if (!of_get_property(node, "linux,opened", NULL) || node == boot_display)
continue;
ret = snprintf(buf, sizeof(buf), of_display_format, display_number++);
if (ret < sizeof(buf))
of_platform_device_create(node, buf, NULL);
of: Create platform devices for OF framebuffers Create a platform device for each OF-declared framebuffer and have offb bind to these devices. Allows for real hot-unplugging and other drivers besides offb. Originally, offb created framebuffer devices while initializing its module by parsing the OF device tree. No actual Linux device was set up. This tied OF framebuffers to offb and makes writing other drivers for the OF framebuffers complicated. The absence of a Linux device further prevented real hot-unplugging. Adding a distinct platform device for each OF framebuffer solves both problems. Specifically, a DRM driver can now provide graphics output for modern userspace. Some of the offb init code is now located in the OF initialization. There's now also an implementation of of_platform_default_populate_init(), which was missing before. The OF side creates different devices for either OF display nodes or BootX displays as they require different handling by the driver. The offb drivers picks up each type of device and runs the appropriate fbdev initialization. Tested with OF display nodes on qemu's ppc64le target. v3: * declare variable 'node' with function scope (Rob) v2: * run PPC code as part of existing initialization (Rob) * add a few more error warnings (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419100405.12600-2-tzimmermann@suse.de
2022-04-19 10:04:04 +00:00
}
} else {
/*
* Handle certain compatibles explicitly, since we don't want to create
* platform_devices for every node in /reserved-memory with a
* "compatible",
*/
for_each_matching_node(node, reserved_mem_matches)
of_platform_device_create(node, NULL, NULL);
node = of_find_node_by_path("/firmware");
if (node) {
of_platform_populate(node, NULL, NULL, NULL);
of_node_put(node);
}
of: Create platform devices for OF framebuffers Create a platform device for each OF-declared framebuffer and have offb bind to these devices. Allows for real hot-unplugging and other drivers besides offb. Originally, offb created framebuffer devices while initializing its module by parsing the OF device tree. No actual Linux device was set up. This tied OF framebuffers to offb and makes writing other drivers for the OF framebuffers complicated. The absence of a Linux device further prevented real hot-unplugging. Adding a distinct platform device for each OF framebuffer solves both problems. Specifically, a DRM driver can now provide graphics output for modern userspace. Some of the offb init code is now located in the OF initialization. There's now also an implementation of of_platform_default_populate_init(), which was missing before. The OF side creates different devices for either OF display nodes or BootX displays as they require different handling by the driver. The offb drivers picks up each type of device and runs the appropriate fbdev initialization. Tested with OF display nodes on qemu's ppc64le target. v3: * declare variable 'node' with function scope (Rob) v2: * run PPC code as part of existing initialization (Rob) * add a few more error warnings (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419100405.12600-2-tzimmermann@suse.de
2022-04-19 10:04:04 +00:00
node = of_get_compatible_child(of_chosen, "simple-framebuffer");
of_platform_device_create(node, NULL, NULL);
of_node_put(node);
of: Create platform devices for OF framebuffers Create a platform device for each OF-declared framebuffer and have offb bind to these devices. Allows for real hot-unplugging and other drivers besides offb. Originally, offb created framebuffer devices while initializing its module by parsing the OF device tree. No actual Linux device was set up. This tied OF framebuffers to offb and makes writing other drivers for the OF framebuffers complicated. The absence of a Linux device further prevented real hot-unplugging. Adding a distinct platform device for each OF framebuffer solves both problems. Specifically, a DRM driver can now provide graphics output for modern userspace. Some of the offb init code is now located in the OF initialization. There's now also an implementation of of_platform_default_populate_init(), which was missing before. The OF side creates different devices for either OF display nodes or BootX displays as they require different handling by the driver. The offb drivers picks up each type of device and runs the appropriate fbdev initialization. Tested with OF display nodes on qemu's ppc64le target. v3: * declare variable 'node' with function scope (Rob) v2: * run PPC code as part of existing initialization (Rob) * add a few more error warnings (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419100405.12600-2-tzimmermann@suse.de
2022-04-19 10:04:04 +00:00
/* Populate everything else. */
of_platform_default_populate(NULL, NULL, NULL);
}
return 0;
}
arch_initcall_sync(of_platform_default_populate_init);
static int __init of_platform_sync_state_init(void)
{
device_links_supplier_sync_state_resume();
return 0;
}
late_initcall_sync(of_platform_sync_state_init);
int of_platform_device_destroy(struct device *dev, void *data)
{
/* Do not touch devices not populated from the device tree */
if (!dev->of_node || !of_node_check_flag(dev->of_node, OF_POPULATED))
return 0;
/* Recurse for any nodes that were treated as busses */
if (of_node_check_flag(dev->of_node, OF_POPULATED_BUS))
device_for_each_child(dev, NULL, of_platform_device_destroy);
of: platform: stop accessing invalid dev in of_platform_device_destroy Immediately after the platform_device_unregister() the device will be cleaned up. Accessing the freed pointer immediately after that will crash the system. Found this bug when kernel is built with CONFIG_PAGE_POISONING and testing loading/unloading audio drivers in a loop on Qcom platforms. Fix this by moving of_node_clear_flag() just before the unregister calls. Below is the crash trace: Unable to handle kernel paging request at virtual address 6b6b6b6b6b6c03 Mem abort info: ESR = 0x96000021 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000021 CM = 0, WnR = 0 [006b6b6b6b6b6c03] address between user and kernel address ranges Internal error: Oops: 96000021 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 1784 Comm: sh Tainted: G W 4.17.0-rc7-02230-ge3a63a7ef641-dirty #204 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : clear_bit+0x18/0x2c lr : of_platform_device_destroy+0x64/0xb8 sp : ffff00000c9c3930 x29: ffff00000c9c3930 x28: ffff80003d39b200 x27: ffff000008bb1000 x26: 0000000000000040 x25: 0000000000000124 x24: ffff80003a9a3080 x23: 0000000000000060 x22: ffff00000939f518 x21: ffff80003aa79e98 x20: ffff80003aa3dae0 x19: ffff80003aa3c890 x18: ffff800009feb794 x17: 0000000000000000 x16: 0000000000000000 x15: ffff800009feb790 x14: 0000000000000000 x13: ffff80003a058778 x12: ffff80003a058728 x11: ffff80003a058750 x10: 0000000000000000 x9 : 0000000000000006 x8 : ffff80003a825988 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000001 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000008 x2 : 0000000000000001 x1 : 6b6b6b6b6b6b6c03 x0 : 0000000000000000 Process sh (pid: 1784, stack limit = 0x (ptrval)) Call trace: clear_bit+0x18/0x2c q6afe_remove+0x20/0x38 apr_device_remove+0x30/0x70 device_release_driver_internal+0x170/0x208 device_release_driver+0x14/0x20 bus_remove_device+0xcc/0x150 device_del+0x10c/0x310 device_unregister+0x1c/0x70 apr_remove_device+0xc/0x18 device_for_each_child+0x50/0x80 apr_remove+0x18/0x20 rpmsg_dev_remove+0x38/0x68 device_release_driver_internal+0x170/0x208 device_release_driver+0x14/0x20 bus_remove_device+0xcc/0x150 device_del+0x10c/0x310 device_unregister+0x1c/0x70 qcom_smd_remove_device+0xc/0x18 device_for_each_child+0x50/0x80 qcom_smd_unregister_edge+0x3c/0x70 smd_subdev_remove+0x18/0x28 rproc_stop+0x48/0xd8 rproc_shutdown+0x60/0xe8 state_store+0xbc/0xf8 dev_attr_store+0x18/0x28 sysfs_kf_write+0x3c/0x50 kernfs_fop_write+0x118/0x1e0 __vfs_write+0x18/0x110 vfs_write+0xa4/0x1a8 ksys_write+0x48/0xb0 sys_write+0xc/0x18 el0_svc_naked+0x30/0x34 Code: d2800022 8b400c21 f9800031 9ac32043 (c85f7c22) ---[ end trace 32020935775616a2 ]--- Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-06-04 14:14:08 +00:00
of_node_clear_flag(dev->of_node, OF_POPULATED);
of_node_clear_flag(dev->of_node, OF_POPULATED_BUS);
if (dev->bus == &platform_bus_type)
platform_device_unregister(to_platform_device(dev));
#ifdef CONFIG_ARM_AMBA
else if (dev->bus == &amba_bustype)
amba_device_unregister(to_amba_device(dev));
#endif
return 0;
}
EXPORT_SYMBOL_GPL(of_platform_device_destroy);
/**
* of_platform_depopulate() - Remove devices populated from device tree
* @parent: device which children will be removed
*
* Complementary to of_platform_populate(), this function removes children
* of the given device (and, recurrently, their children) that have been
* created from their respective device tree nodes (and only those,
* leaving others - eg. manually created - unharmed).
*/
void of_platform_depopulate(struct device *parent)
{
if (parent->of_node && of_node_check_flag(parent->of_node, OF_POPULATED_BUS)) {
device_for_each_child_reverse(parent, NULL, of_platform_device_destroy);
of_node_clear_flag(parent->of_node, OF_POPULATED_BUS);
}
}
EXPORT_SYMBOL_GPL(of_platform_depopulate);
static void devm_of_platform_populate_release(struct device *dev, void *res)
{
of_platform_depopulate(*(struct device **)res);
}
/**
* devm_of_platform_populate() - Populate platform_devices from device tree data
* @dev: device that requested to populate from device tree data
*
* Similar to of_platform_populate(), but will automatically call
* of_platform_depopulate() when the device is unbound from the bus.
*
* Return: 0 on success, < 0 on failure.
*/
int devm_of_platform_populate(struct device *dev)
{
struct device **ptr;
int ret;
if (!dev)
return -EINVAL;
ptr = devres_alloc(devm_of_platform_populate_release,
sizeof(*ptr), GFP_KERNEL);
if (!ptr)
return -ENOMEM;
ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
if (ret) {
devres_free(ptr);
} else {
*ptr = dev;
devres_add(dev, ptr);
}
return ret;
}
EXPORT_SYMBOL_GPL(devm_of_platform_populate);
static int devm_of_platform_match(struct device *dev, void *res, void *data)
{
struct device **ptr = res;
if (!ptr) {
WARN_ON(!ptr);
return 0;
}
return *ptr == data;
}
/**
* devm_of_platform_depopulate() - Remove devices populated from device tree
* @dev: device that requested to depopulate from device tree data
*
* Complementary to devm_of_platform_populate(), this function removes children
* of the given device (and, recurrently, their children) that have been
* created from their respective device tree nodes (and only those,
* leaving others - eg. manually created - unharmed).
*/
void devm_of_platform_depopulate(struct device *dev)
{
int ret;
ret = devres_release(dev, devm_of_platform_populate_release,
devm_of_platform_match, dev);
WARN_ON(ret);
}
EXPORT_SYMBOL_GPL(devm_of_platform_depopulate);
#ifdef CONFIG_OF_DYNAMIC
static int of_platform_notify(struct notifier_block *nb,
unsigned long action, void *arg)
{
struct of_reconfig_data *rd = arg;
struct platform_device *pdev_parent, *pdev;
bool children_left;
switch (of_reconfig_get_state_change(action, rd)) {
case OF_RECONFIG_CHANGE_ADD:
/* verify that the parent is a bus */
if (!of_node_check_flag(rd->dn->parent, OF_POPULATED_BUS))
return NOTIFY_OK; /* not for us */
/* already populated? (driver using of_populate manually) */
if (of_node_check_flag(rd->dn, OF_POPULATED))
return NOTIFY_OK;
treewide: Fix probing of devices in DT overlays When loading a DT overlay that creates a device, the device is not probed, unless the DT overlay is unloaded and reloaded again. After the recent refactoring to improve fw_devlink, it no longer depends on the "compatible" property to identify which device tree nodes will become struct devices. fw_devlink now picks up dangling consumers (consumers pointing to descendent device tree nodes of a device that aren't converted to child devices) when a device is successfully bound to a driver. See __fw_devlink_pickup_dangling_consumers(). However, during DT overlay, a device's device tree node can have sub-nodes added/removed without unbinding/rebinding the driver. This difference in behavior between the normal device instantiation and probing flow vs. the DT overlay flow has a bunch of implications that are pointed out elsewhere[1]. One of them is that the fw_devlink logic to pick up dangling consumers is never exercised. This patch solves the fw_devlink issue by marking all DT nodes added by DT overlays with FWNODE_FLAG_NOT_DEVICE (fwnode that won't become device), and by clearing the flag when a struct device is actually created for the DT node. This way, fw_devlink knows not to have consumers waiting on these newly added DT nodes, and to propagate the dependency to an ancestor DT node that has the corresponding struct device. Based on a patch by Saravana Kannan, which covered only platform and spi devices. [1] https://lore.kernel.org/r/CAGETcx_bkuFaLCiPrAWCPQz+w79ccDp6=9e881qmK=vx3hBMyg@mail.gmail.com Fixes: 4a032827daa89350 ("of: property: Simplify of_link_to_phandle()") Link: https://lore.kernel.org/r/CAGETcx_+rhHvaC_HJXGrr5_WAd2+k5f=rWYnkCZ6z5bGX-wj4w@mail.gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Saravana Kannan <saravanak@google.com> Tested-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Link: https://lore.kernel.org/r/e1fa546682ea4c8474ff997ab6244c5e11b6f8bc.1680182615.git.geert+renesas@glider.be Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-30 13:26:13 +00:00
/*
* Clear the flag before adding the device so that fw_devlink
* doesn't skip adding consumers to this device.
*/
rd->dn->fwnode.flags &= ~FWNODE_FLAG_NOT_DEVICE;
/* pdev_parent may be NULL when no bus platform device */
pdev_parent = of_find_device_by_node(rd->dn->parent);
pdev = of_platform_device_create(rd->dn, NULL,
pdev_parent ? &pdev_parent->dev : NULL);
platform_device_put(pdev_parent);
if (pdev == NULL) {
pr_err("%s: failed to create for '%pOF'\n",
__func__, rd->dn);
/* of_platform_device_create tosses the error code */
return notifier_from_errno(-EINVAL);
}
break;
case OF_RECONFIG_CHANGE_REMOVE:
/* already depopulated? */
if (!of_node_check_flag(rd->dn, OF_POPULATED))
return NOTIFY_OK;
/* find our device by node */
pdev = of_find_device_by_node(rd->dn);
if (pdev == NULL)
return NOTIFY_OK; /* no? not meant for us */
/* unregister takes one ref away */
of_platform_device_destroy(&pdev->dev, &children_left);
/* and put the reference of the find */
platform_device_put(pdev);
break;
}
return NOTIFY_OK;
}
static struct notifier_block platform_of_notifier = {
.notifier_call = of_platform_notify,
};
void of_platform_register_reconfig_notifier(void)
{
WARN_ON(of_reconfig_notifier_register(&platform_of_notifier));
}
#endif /* CONFIG_OF_DYNAMIC */
#endif /* CONFIG_OF_ADDRESS */