License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2008-10-23 05:26:29 +00:00
|
|
|
#ifndef _ASM_X86_HW_IRQ_H
|
|
|
|
|
#define _ASM_X86_HW_IRQ_H
|
2008-05-02 17:00:30 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
|
|
|
|
|
*
|
|
|
|
|
* moved some of the old arch/i386/kernel/irq.h to here. VY
|
|
|
|
|
*
|
|
|
|
|
* IRQ/IPI changes taken from work by Thomas Radke
|
|
|
|
|
* <tomsoft@informatik.tu-chemnitz.de>
|
|
|
|
|
*
|
|
|
|
|
* hacked by Andi Kleen for x86-64.
|
|
|
|
|
* unified by tglx
|
|
|
|
|
*/
|
|
|
|
|
|
2008-05-02 18:10:09 +00:00
|
|
|
#include <asm/irq_vectors.h>
|
2008-05-02 17:00:30 +00:00
|
|
|
|
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
|
|
|
|
|
|
#include <linux/percpu.h>
|
|
|
|
|
#include <linux/profile.h>
|
|
|
|
|
#include <linux/smp.h>
|
|
|
|
|
|
2011-07-26 23:09:06 +00:00
|
|
|
#include <linux/atomic.h>
|
2008-05-02 17:00:30 +00:00
|
|
|
#include <asm/irq.h>
|
|
|
|
|
#include <asm/sections.h>
|
|
|
|
|
|
2023-10-12 03:26:59 +00:00
|
|
|
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
|
2014-10-27 08:12:00 +00:00
|
|
|
struct irq_data;
|
irq_remapping: Introduce new interfaces to support hierarchical irqdomains
Introduce new interfaces for interrupt remapping drivers to support
hierarchical irqdomains:
1) irq_remapping_get_ir_irq_domain(): get irqdomain associated with an
interrupt remapping unit. IOAPIC/HPET drivers use this interface to
get parent interrupt remapping irqdomain.
2) irq_remapping_get_irq_domain(): get irqdomain for an IRQ allocation.
This is mainly used to support MSI irqdomain. We must build one MSI
irqdomain for each interrupt remapping unit. MSI driver calls this
interface to get MSI irqdomain associated with an IR irqdomain which
manages the PCI devices. In a further step we will store the irqdomain
pointer in the device struct to avoid this call in the irq allocation
path.
Architecture specific hooks:
1) arch_get_ir_parent_domain(): get parent irqdomain for IR irqdomain,
which is x86_vector_domain on x86 platforms.
2) arch_create_msi_irq_domain(): create an MSI irqdomain associated with
the interrupt remapping unit.
We also add following callbacks into struct irq_remap_ops:
struct irq_domain *(*get_ir_irq_domain)(struct irq_alloc_info *);
struct irq_domain *(*get_irq_domain)(struct irq_alloc_info *);
Once all clients of IR have been converted to the new hierarchical irqdomain
interfaces, we will:
1) Remove set_ioapic_entry, set_affinity, free_irq, compose_msi_msg,
msi_alloc_irq, msi_setup_irq, setup_hpet_msi from struct remap_osp
2) Remove setup_ioapic_remapped_entry, free_remapped_irq,
compose_remapped_msi_msg, setup_hpet_msi_remapped, setup_remapped_irq.
3) Simplify x86_io_apic_ops and x86_msi.
We can achieve a way clearer architecture with all these changes
applied.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: iommu@lists.linux-foundation.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Joerg Roedel <joro@8bytes.org>
Link: http://lkml.kernel.org/r/1428905519-23704-9-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-13 06:11:30 +00:00
|
|
|
struct pci_dev;
|
|
|
|
|
struct msi_desc;
|
|
|
|
|
|
|
|
|
|
enum irq_alloc_type {
|
|
|
|
|
X86_IRQ_ALLOC_TYPE_IOAPIC = 1,
|
|
|
|
|
X86_IRQ_ALLOC_TYPE_HPET,
|
2020-08-26 11:16:35 +00:00
|
|
|
X86_IRQ_ALLOC_TYPE_PCI_MSI,
|
|
|
|
|
X86_IRQ_ALLOC_TYPE_PCI_MSIX,
|
2015-04-13 06:11:42 +00:00
|
|
|
X86_IRQ_ALLOC_TYPE_DMAR,
|
2020-11-11 12:09:01 +00:00
|
|
|
X86_IRQ_ALLOC_TYPE_AMDVI,
|
2015-04-13 06:11:44 +00:00
|
|
|
X86_IRQ_ALLOC_TYPE_UV,
|
irq_remapping: Introduce new interfaces to support hierarchical irqdomains
Introduce new interfaces for interrupt remapping drivers to support
hierarchical irqdomains:
1) irq_remapping_get_ir_irq_domain(): get irqdomain associated with an
interrupt remapping unit. IOAPIC/HPET drivers use this interface to
get parent interrupt remapping irqdomain.
2) irq_remapping_get_irq_domain(): get irqdomain for an IRQ allocation.
This is mainly used to support MSI irqdomain. We must build one MSI
irqdomain for each interrupt remapping unit. MSI driver calls this
interface to get MSI irqdomain associated with an IR irqdomain which
manages the PCI devices. In a further step we will store the irqdomain
pointer in the device struct to avoid this call in the irq allocation
path.
Architecture specific hooks:
1) arch_get_ir_parent_domain(): get parent irqdomain for IR irqdomain,
which is x86_vector_domain on x86 platforms.
2) arch_create_msi_irq_domain(): create an MSI irqdomain associated with
the interrupt remapping unit.
We also add following callbacks into struct irq_remap_ops:
struct irq_domain *(*get_ir_irq_domain)(struct irq_alloc_info *);
struct irq_domain *(*get_irq_domain)(struct irq_alloc_info *);
Once all clients of IR have been converted to the new hierarchical irqdomain
interfaces, we will:
1) Remove set_ioapic_entry, set_affinity, free_irq, compose_msi_msg,
msi_alloc_irq, msi_setup_irq, setup_hpet_msi from struct remap_osp
2) Remove setup_ioapic_remapped_entry, free_remapped_irq,
compose_remapped_msi_msg, setup_hpet_msi_remapped, setup_remapped_irq.
3) Simplify x86_io_apic_ops and x86_msi.
We can achieve a way clearer architecture with all these changes
applied.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: iommu@lists.linux-foundation.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Joerg Roedel <joro@8bytes.org>
Link: http://lkml.kernel.org/r/1428905519-23704-9-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-13 06:11:30 +00:00
|
|
|
};
|
2015-04-13 06:11:24 +00:00
|
|
|
|
2020-08-26 11:16:42 +00:00
|
|
|
struct ioapic_alloc_info {
|
2020-10-24 21:35:21 +00:00
|
|
|
int pin;
|
|
|
|
|
int node;
|
|
|
|
|
u32 is_level : 1;
|
|
|
|
|
u32 active_low : 1;
|
|
|
|
|
u32 valid : 1;
|
2020-08-26 11:16:42 +00:00
|
|
|
};
|
|
|
|
|
|
2020-08-26 11:16:44 +00:00
|
|
|
struct uv_alloc_info {
|
|
|
|
|
int limit;
|
|
|
|
|
int blade;
|
|
|
|
|
unsigned long offset;
|
|
|
|
|
char *name;
|
|
|
|
|
|
|
|
|
|
};
|
|
|
|
|
|
2020-08-26 11:16:40 +00:00
|
|
|
/**
|
|
|
|
|
* irq_alloc_info - X86 specific interrupt allocation info
|
|
|
|
|
* @type: X86 specific allocation type
|
|
|
|
|
* @flags: Flags for allocation tweaks
|
|
|
|
|
* @devid: Device ID for allocations
|
|
|
|
|
* @hwirq: Associated hw interrupt number in the domain
|
|
|
|
|
* @mask: CPU mask for vector allocation
|
|
|
|
|
* @desc: Pointer to msi descriptor
|
|
|
|
|
* @data: Allocation specific data
|
2020-08-26 11:16:42 +00:00
|
|
|
*
|
|
|
|
|
* @ioapic: IOAPIC specific allocation data
|
2020-08-26 11:16:44 +00:00
|
|
|
* @uv: UV specific allocation data
|
|
|
|
|
*/
|
2015-04-13 06:11:24 +00:00
|
|
|
struct irq_alloc_info {
|
irq_remapping: Introduce new interfaces to support hierarchical irqdomains
Introduce new interfaces for interrupt remapping drivers to support
hierarchical irqdomains:
1) irq_remapping_get_ir_irq_domain(): get irqdomain associated with an
interrupt remapping unit. IOAPIC/HPET drivers use this interface to
get parent interrupt remapping irqdomain.
2) irq_remapping_get_irq_domain(): get irqdomain for an IRQ allocation.
This is mainly used to support MSI irqdomain. We must build one MSI
irqdomain for each interrupt remapping unit. MSI driver calls this
interface to get MSI irqdomain associated with an IR irqdomain which
manages the PCI devices. In a further step we will store the irqdomain
pointer in the device struct to avoid this call in the irq allocation
path.
Architecture specific hooks:
1) arch_get_ir_parent_domain(): get parent irqdomain for IR irqdomain,
which is x86_vector_domain on x86 platforms.
2) arch_create_msi_irq_domain(): create an MSI irqdomain associated with
the interrupt remapping unit.
We also add following callbacks into struct irq_remap_ops:
struct irq_domain *(*get_ir_irq_domain)(struct irq_alloc_info *);
struct irq_domain *(*get_irq_domain)(struct irq_alloc_info *);
Once all clients of IR have been converted to the new hierarchical irqdomain
interfaces, we will:
1) Remove set_ioapic_entry, set_affinity, free_irq, compose_msi_msg,
msi_alloc_irq, msi_setup_irq, setup_hpet_msi from struct remap_osp
2) Remove setup_ioapic_remapped_entry, free_remapped_irq,
compose_remapped_msi_msg, setup_hpet_msi_remapped, setup_remapped_irq.
3) Simplify x86_io_apic_ops and x86_msi.
We can achieve a way clearer architecture with all these changes
applied.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: iommu@lists.linux-foundation.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Joerg Roedel <joro@8bytes.org>
Link: http://lkml.kernel.org/r/1428905519-23704-9-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-13 06:11:30 +00:00
|
|
|
enum irq_alloc_type type;
|
2015-04-13 06:11:24 +00:00
|
|
|
u32 flags;
|
2020-08-26 11:16:40 +00:00
|
|
|
u32 devid;
|
|
|
|
|
irq_hw_number_t hwirq;
|
|
|
|
|
const struct cpumask *mask;
|
|
|
|
|
struct msi_desc *desc;
|
|
|
|
|
void *data;
|
|
|
|
|
|
irq_remapping: Introduce new interfaces to support hierarchical irqdomains
Introduce new interfaces for interrupt remapping drivers to support
hierarchical irqdomains:
1) irq_remapping_get_ir_irq_domain(): get irqdomain associated with an
interrupt remapping unit. IOAPIC/HPET drivers use this interface to
get parent interrupt remapping irqdomain.
2) irq_remapping_get_irq_domain(): get irqdomain for an IRQ allocation.
This is mainly used to support MSI irqdomain. We must build one MSI
irqdomain for each interrupt remapping unit. MSI driver calls this
interface to get MSI irqdomain associated with an IR irqdomain which
manages the PCI devices. In a further step we will store the irqdomain
pointer in the device struct to avoid this call in the irq allocation
path.
Architecture specific hooks:
1) arch_get_ir_parent_domain(): get parent irqdomain for IR irqdomain,
which is x86_vector_domain on x86 platforms.
2) arch_create_msi_irq_domain(): create an MSI irqdomain associated with
the interrupt remapping unit.
We also add following callbacks into struct irq_remap_ops:
struct irq_domain *(*get_ir_irq_domain)(struct irq_alloc_info *);
struct irq_domain *(*get_irq_domain)(struct irq_alloc_info *);
Once all clients of IR have been converted to the new hierarchical irqdomain
interfaces, we will:
1) Remove set_ioapic_entry, set_affinity, free_irq, compose_msi_msg,
msi_alloc_irq, msi_setup_irq, setup_hpet_msi from struct remap_osp
2) Remove setup_ioapic_remapped_entry, free_remapped_irq,
compose_remapped_msi_msg, setup_hpet_msi_remapped, setup_remapped_irq.
3) Simplify x86_io_apic_ops and x86_msi.
We can achieve a way clearer architecture with all these changes
applied.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: iommu@lists.linux-foundation.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Joerg Roedel <joro@8bytes.org>
Link: http://lkml.kernel.org/r/1428905519-23704-9-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-13 06:11:30 +00:00
|
|
|
union {
|
2020-08-26 11:16:42 +00:00
|
|
|
struct ioapic_alloc_info ioapic;
|
2020-08-26 11:16:44 +00:00
|
|
|
struct uv_alloc_info uv;
|
irq_remapping: Introduce new interfaces to support hierarchical irqdomains
Introduce new interfaces for interrupt remapping drivers to support
hierarchical irqdomains:
1) irq_remapping_get_ir_irq_domain(): get irqdomain associated with an
interrupt remapping unit. IOAPIC/HPET drivers use this interface to
get parent interrupt remapping irqdomain.
2) irq_remapping_get_irq_domain(): get irqdomain for an IRQ allocation.
This is mainly used to support MSI irqdomain. We must build one MSI
irqdomain for each interrupt remapping unit. MSI driver calls this
interface to get MSI irqdomain associated with an IR irqdomain which
manages the PCI devices. In a further step we will store the irqdomain
pointer in the device struct to avoid this call in the irq allocation
path.
Architecture specific hooks:
1) arch_get_ir_parent_domain(): get parent irqdomain for IR irqdomain,
which is x86_vector_domain on x86 platforms.
2) arch_create_msi_irq_domain(): create an MSI irqdomain associated with
the interrupt remapping unit.
We also add following callbacks into struct irq_remap_ops:
struct irq_domain *(*get_ir_irq_domain)(struct irq_alloc_info *);
struct irq_domain *(*get_irq_domain)(struct irq_alloc_info *);
Once all clients of IR have been converted to the new hierarchical irqdomain
interfaces, we will:
1) Remove set_ioapic_entry, set_affinity, free_irq, compose_msi_msg,
msi_alloc_irq, msi_setup_irq, setup_hpet_msi from struct remap_osp
2) Remove setup_ioapic_remapped_entry, free_remapped_irq,
compose_remapped_msi_msg, setup_hpet_msi_remapped, setup_remapped_irq.
3) Simplify x86_io_apic_ops and x86_msi.
We can achieve a way clearer architecture with all these changes
applied.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: iommu@lists.linux-foundation.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Joerg Roedel <joro@8bytes.org>
Link: http://lkml.kernel.org/r/1428905519-23704-9-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-13 06:11:30 +00:00
|
|
|
};
|
2015-04-13 06:11:24 +00:00
|
|
|
};
|
|
|
|
|
|
2009-10-13 20:32:36 +00:00
|
|
|
struct irq_cfg {
|
2015-04-13 06:11:23 +00:00
|
|
|
unsigned int dest_apicid;
|
2017-09-13 21:29:45 +00:00
|
|
|
unsigned int vector;
|
2009-10-13 20:32:36 +00:00
|
|
|
};
|
|
|
|
|
|
2014-10-27 08:11:59 +00:00
|
|
|
extern struct irq_cfg *irq_cfg(unsigned int irq);
|
|
|
|
|
extern struct irq_cfg *irqd_cfg(struct irq_data *irq_data);
|
2014-10-27 08:12:00 +00:00
|
|
|
extern void lock_vector_lock(void);
|
|
|
|
|
extern void unlock_vector_lock(void);
|
2014-10-27 08:12:11 +00:00
|
|
|
#ifdef CONFIG_SMP
|
2023-06-21 17:12:46 +00:00
|
|
|
extern void vector_schedule_cleanup(struct irq_cfg *);
|
2014-11-05 09:12:27 +00:00
|
|
|
extern void irq_complete_move(struct irq_cfg *cfg);
|
2014-10-27 08:12:11 +00:00
|
|
|
#else
|
2023-06-21 17:12:46 +00:00
|
|
|
static inline void vector_schedule_cleanup(struct irq_cfg *c) { }
|
2014-11-05 09:12:27 +00:00
|
|
|
static inline void irq_complete_move(struct irq_cfg *c) { }
|
2014-10-27 08:12:11 +00:00
|
|
|
#endif
|
2009-10-14 13:06:42 +00:00
|
|
|
|
2014-10-27 08:12:00 +00:00
|
|
|
extern void apic_ack_edge(struct irq_data *data);
|
2023-10-12 03:26:59 +00:00
|
|
|
#else /* CONFIG_IRQ_DOMAIN_HIERARCHY */
|
2014-10-27 08:11:56 +00:00
|
|
|
static inline void lock_vector_lock(void) {}
|
|
|
|
|
static inline void unlock_vector_lock(void) {}
|
2023-10-12 03:26:59 +00:00
|
|
|
#endif /* CONFIG_IRQ_DOMAIN_HIERARCHY */
|
2014-10-27 08:11:56 +00:00
|
|
|
|
2008-05-02 17:00:30 +00:00
|
|
|
/* Statistics */
|
|
|
|
|
extern atomic_t irq_err_count;
|
|
|
|
|
extern atomic_t irq_mis_count;
|
|
|
|
|
|
2015-05-10 00:27:37 +00:00
|
|
|
extern void elcr_set_level_irq(unsigned int irq);
|
2008-05-02 22:30:50 +00:00
|
|
|
|
2015-04-03 19:49:13 +00:00
|
|
|
extern char irq_entries_start[];
|
2013-10-30 20:37:00 +00:00
|
|
|
#ifdef CONFIG_TRACING
|
2015-04-03 19:49:13 +00:00
|
|
|
#define trace_irq_entries_start irq_entries_start
|
2013-10-30 20:37:00 +00:00
|
|
|
#endif
|
2008-08-20 03:50:28 +00:00
|
|
|
|
2019-06-28 11:11:54 +00:00
|
|
|
extern char spurious_entries_start[];
|
|
|
|
|
|
2015-08-02 20:38:27 +00:00
|
|
|
#define VECTOR_UNUSED NULL
|
2019-08-19 19:34:47 +00:00
|
|
|
#define VECTOR_SHUTDOWN ((void *)-1L)
|
|
|
|
|
#define VECTOR_RETRIGGERED ((void *)-2L)
|
2014-01-05 16:10:52 +00:00
|
|
|
|
2015-08-02 20:38:27 +00:00
|
|
|
typedef struct irq_desc* vector_irq_t[NR_VECTORS];
|
2008-05-02 20:10:39 +00:00
|
|
|
DECLARE_PER_CPU(vector_irq_t, vector_irq);
|
2008-05-02 17:00:30 +00:00
|
|
|
|
2008-05-02 20:10:39 +00:00
|
|
|
#endif /* !ASSEMBLY_ */
|
|
|
|
|
|
2008-10-23 05:26:29 +00:00
|
|
|
#endif /* _ASM_X86_HW_IRQ_H */
|