mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-29 23:53:32 +00:00
Code Issues Releases Wiki Activity
linux-stable/net/bluetooth/hidp/hidp.h

193 lines
5.2 KiB
C
Raw Normal View History

[NET] BLUETOOTH: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:33 +00:00
/*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
HIDP implementation for Linux Bluetooth stack (BlueZ).
Copyright (C) 2003-2004 Marcel Holtmann <marcel@holtmann.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 as
published by the Free Software Foundation;
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
[NET] BLUETOOTH: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:33 +00:00
CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
[NET] BLUETOOTH: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 14:24:33 +00:00
ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
SOFTWARE IS DISCLAIMED.
*/
#ifndef __HIDP_H
#define __HIDP_H
#include <linux/types.h>
HID: Bluetooth: hidp: make sure input buffers are big enough HID core expects the input buffers to be at least of size 4096 (HID_MAX_BUFFER_SIZE). Other sizes will result in buffer-overflows if an input-report is smaller than advertised. We could, like i2c, compute the biggest report-size instead of using HID_MAX_BUFFER_SIZE, but this will blow up if report-descriptors are changed after ->start() has been called. So lets be safe and just use the biggest buffer we have. Note that this adds an additional copy to the HIDP input path. If there is a way to make sure the skb-buf is big enough, we should use that instead. The best way would be to make hid-core honor the @size argument, though, that sounds easier than it is. So lets just fix the buffer-overflows for now and afterwards look for a faster way for all transport drivers. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-19 11:09:32 +00:00
#include <linux/hid.h>
Bluetooth: hidp: add new session-management helpers This is a rewrite of the HIDP session management. It implements HIDP as an l2cap_user sub-module so we get proper notification when the underlying connection goes away. The helpers are not yet used but only added in this commit. The old session management is still used and will be removed in a following patch. The old session-management was flawed. Hotplugging is horribly broken and we have no way of getting notified when the underlying connection goes down. The whole idea of removing the HID/input sub-devices from within the session itself is broken and suffers from major dead-locks. We never can guarantee that the session can unregister itself as long as we use synchronous shutdowns. This can only work with asynchronous shutdowns. However, in this case we _must_ be able to unregister the session from the outside as otherwise the l2cap_conn object might be unlinked before we are. The new session-management is based on l2cap_user. There is only one way how to add a session and how to delete a session: "probe" and "remove" callbacks from l2cap_user. This guarantees that the session can be registered and unregistered at _any_ time without any synchronous shutdown. On the other hand, much work has been put into proper session-refcounting. We can unregister/unlink the session only if we can guarantee that it will stay alive. But for asynchronous shutdowns we never know when the last user goes away so we must use proper ref-counting. The old ->conn field has been renamed to ->hconn so we can reuse ->conn in the new session management. No other existing HIDP code is modified. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:46 +00:00
#include <linux/kref.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <net/bluetooth/bluetooth.h>
Bluetooth: hidp: add new session-management helpers This is a rewrite of the HIDP session management. It implements HIDP as an l2cap_user sub-module so we get proper notification when the underlying connection goes away. The helpers are not yet used but only added in this commit. The old session management is still used and will be removed in a following patch. The old session-management was flawed. Hotplugging is horribly broken and we have no way of getting notified when the underlying connection goes down. The whole idea of removing the HID/input sub-devices from within the session itself is broken and suffers from major dead-locks. We never can guarantee that the session can unregister itself as long as we use synchronous shutdowns. This can only work with asynchronous shutdowns. However, in this case we _must_ be able to unregister the session from the outside as otherwise the l2cap_conn object might be unlinked before we are. The new session-management is based on l2cap_user. There is only one way how to add a session and how to delete a session: "probe" and "remove" callbacks from l2cap_user. This guarantees that the session can be registered and unregistered at _any_ time without any synchronous shutdown. On the other hand, much work has been put into proper session-refcounting. We can unregister/unlink the session only if we can guarantee that it will stay alive. But for asynchronous shutdowns we never know when the last user goes away so we must use proper ref-counting. The old ->conn field has been renamed to ->hconn so we can reuse ->conn in the new session management. No other existing HIDP code is modified. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:46 +00:00
#include <net/bluetooth/l2cap.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* HIDP header masks */
#define HIDP_HEADER_TRANS_MASK 0xf0
#define HIDP_HEADER_PARAM_MASK 0x0f
/* HIDP transaction types */
#define HIDP_TRANS_HANDSHAKE 0x00
#define HIDP_TRANS_HID_CONTROL 0x10
#define HIDP_TRANS_GET_REPORT 0x40
#define HIDP_TRANS_SET_REPORT 0x50
#define HIDP_TRANS_GET_PROTOCOL 0x60
#define HIDP_TRANS_SET_PROTOCOL 0x70
#define HIDP_TRANS_GET_IDLE 0x80
#define HIDP_TRANS_SET_IDLE 0x90
#define HIDP_TRANS_DATA 0xa0
#define HIDP_TRANS_DATC 0xb0
/* HIDP handshake results */
#define HIDP_HSHK_SUCCESSFUL 0x00
#define HIDP_HSHK_NOT_READY 0x01
#define HIDP_HSHK_ERR_INVALID_REPORT_ID 0x02
#define HIDP_HSHK_ERR_UNSUPPORTED_REQUEST 0x03
#define HIDP_HSHK_ERR_INVALID_PARAMETER 0x04
#define HIDP_HSHK_ERR_UNKNOWN 0x0e
#define HIDP_HSHK_ERR_FATAL 0x0f
/* HIDP control operation parameters */
#define HIDP_CTRL_NOP 0x00
#define HIDP_CTRL_HARD_RESET 0x01
#define HIDP_CTRL_SOFT_RESET 0x02
#define HIDP_CTRL_SUSPEND 0x03
#define HIDP_CTRL_EXIT_SUSPEND 0x04
#define HIDP_CTRL_VIRTUAL_CABLE_UNPLUG 0x05
/* HIDP data transaction headers */
#define HIDP_DATA_RTYPE_MASK 0x03
#define HIDP_DATA_RSRVD_MASK 0x0c
#define HIDP_DATA_RTYPE_OTHER 0x00
#define HIDP_DATA_RTYPE_INPUT 0x01
#define HIDP_DATA_RTYPE_OUPUT 0x02
#define HIDP_DATA_RTYPE_FEATURE 0x03
/* HIDP protocol header parameters */
#define HIDP_PROTO_BOOT 0x00
#define HIDP_PROTO_REPORT 0x01
/* HIDP ioctl defines */
#define HIDPCONNADD _IOW('H', 200, int)
#define HIDPCONNDEL _IOW('H', 201, int)
#define HIDPGETCONNLIST _IOR('H', 210, int)
#define HIDPGETCONNINFO _IOR('H', 211, int)
#define HIDP_VIRTUAL_CABLE_UNPLUG 0
#define HIDP_BOOT_PROTOCOL_MODE 1
#define HIDP_BLUETOOTH_VENDOR_ID 9
HID: bt: hidp.h: do not use a tab after a #define Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-06 08:43:23 +00:00
#define HIDP_WAITING_FOR_RETURN 10
HID: bt: Wait for ACK on Sent Reports Wait for an ACK from the device before returning from hidp_output_raw_report(). This way, failures can be returned to the user application. Also, it prevents ACK/NAK packets from an output packet from being confused with ACK/NAK packets from an input request packet. Signed-off-by: Alan Ott <alan@signal11.us> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-18 08:04:38 +00:00
#define HIDP_WAITING_FOR_SEND_ACK 11
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct hidp_connadd_req {
Bluetooth: Fix checkpatch errors, code style issues and typos in hidp Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-21 13:20:01 +00:00
int ctrl_sock; /* Connected control socket */
int intr_sock; /* Connected interrupt socket */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
__u16 parser;
__u16 rd_size;
[PATCH] hidp __user annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 16:38:00 +00:00
__u8 __user *rd_data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
__u8 country;
__u8 subclass;
__u16 vendor;
__u16 product;
__u16 version;
__u32 flags;
__u32 idle_to;
char name[128];
};
struct hidp_conndel_req {
bdaddr_t bdaddr;
__u32 flags;
};
struct hidp_conninfo {
bdaddr_t bdaddr;
__u32 flags;
__u16 state;
__u16 vendor;
__u16 product;
__u16 version;
char name[128];
};
struct hidp_connlist_req {
__u32 cnum;
struct hidp_conninfo __user *ci;
};
hidp: constify hidp_connection_add() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-08-17 01:44:35 +00:00
int hidp_connection_add(const struct hidp_connadd_req *req, struct socket *ctrl_sock, struct socket *intr_sock);
Bluetooth: hidp: add new session-management helpers This is a rewrite of the HIDP session management. It implements HIDP as an l2cap_user sub-module so we get proper notification when the underlying connection goes away. The helpers are not yet used but only added in this commit. The old session management is still used and will be removed in a following patch. The old session-management was flawed. Hotplugging is horribly broken and we have no way of getting notified when the underlying connection goes down. The whole idea of removing the HID/input sub-devices from within the session itself is broken and suffers from major dead-locks. We never can guarantee that the session can unregister itself as long as we use synchronous shutdowns. This can only work with asynchronous shutdowns. However, in this case we _must_ be able to unregister the session from the outside as otherwise the l2cap_conn object might be unlinked before we are. The new session-management is based on l2cap_user. There is only one way how to add a session and how to delete a session: "probe" and "remove" callbacks from l2cap_user. This guarantees that the session can be registered and unregistered at _any_ time without any synchronous shutdown. On the other hand, much work has been put into proper session-refcounting. We can unregister/unlink the session only if we can guarantee that it will stay alive. But for asynchronous shutdowns we never know when the last user goes away so we must use proper ref-counting. The old ->conn field has been renamed to ->hconn so we can reuse ->conn in the new session management. No other existing HIDP code is modified. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:46 +00:00
int hidp_connection_del(struct hidp_conndel_req *req);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int hidp_get_connlist(struct hidp_connlist_req *req);
int hidp_get_conninfo(struct hidp_conninfo *ci);
Bluetooth: hidp: add new session-management helpers This is a rewrite of the HIDP session management. It implements HIDP as an l2cap_user sub-module so we get proper notification when the underlying connection goes away. The helpers are not yet used but only added in this commit. The old session management is still used and will be removed in a following patch. The old session-management was flawed. Hotplugging is horribly broken and we have no way of getting notified when the underlying connection goes down. The whole idea of removing the HID/input sub-devices from within the session itself is broken and suffers from major dead-locks. We never can guarantee that the session can unregister itself as long as we use synchronous shutdowns. This can only work with asynchronous shutdowns. However, in this case we _must_ be able to unregister the session from the outside as otherwise the l2cap_conn object might be unlinked before we are. The new session-management is based on l2cap_user. There is only one way how to add a session and how to delete a session: "probe" and "remove" callbacks from l2cap_user. This guarantees that the session can be registered and unregistered at _any_ time without any synchronous shutdown. On the other hand, much work has been put into proper session-refcounting. We can unregister/unlink the session only if we can guarantee that it will stay alive. But for asynchronous shutdowns we never know when the last user goes away so we must use proper ref-counting. The old ->conn field has been renamed to ->hconn so we can reuse ->conn in the new session management. No other existing HIDP code is modified. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:46 +00:00
enum hidp_session_state {
HIDP_SESSION_IDLING,
HID: Bluetooth: hidp: register HID devices async While l2cap_user callbacks are running, the whole hci_dev is locked. Even if we would add more fine-grained locking to HCI core, it would still be called from the non-reentrant rx work-queue and thus block the event processing. However, if we want to perform synchronous I/O during HID device registration (eg., to perform device-detection), we need the HCI core to be able to dispatch incoming data. Therefore, we now move device-registration to a separate worker. The HCI core can continue running and we add devices asynchronously in another kernel thread. Device removal is synchronized and waits for the worker to exit before calling the usual device removal functions. If l2cap_user->remove is called before the thread registered the devices, we set "terminate" to true and the thread will skip it. If l2cap_user->remove is called after it, we notice this as the device is no longer in HIDP_SESSION_PREPARING state and simply unregister the device as we did before. There is no new deadlock as we now call hidp_session_add_dev() with one lock less held (the HCI lock) and it cannot itself call back into HCI as it was called with the HCI-lock held before. One might wonder whether this can block during device unregistration. But we set "terminate" to true and wake the HIDP thread up _before_ unregistering the HID/input devices. Therefore, all pending HID I/O operations are canceled. All further I/O attempts will fail with ENODEV or EIO. So all latency we can get are few context-switches, but no timeouts or blocking I/O waits! This change also prepares for a long standing HID bug. All HID devices that register power_supply devices need to be able to handle callbacks during registration (a power_supply oddity that cannot easily be fixed). So with this patch available, we can allow HID I/O during registration by calling the recently introduced hid_device_io_start/stop helpers, which currently are a no-op for bluetooth due to this locking. Note that we cannot do the same for input devices. input-core doesn't allow us to call input_event() asynchronously to input_register_device(), which HID-core kindly allows (for good reasons). Fixing input-core to allow this isn't as easy as it sounds and is, beside simplifying HIDP, not really an improvement. Hence, we still register input devices synchronously as we did before. Only HID devices are registered asynchronously. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Daniel Nicoletti <dantti12@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-23 11:10:25 +00:00
HIDP_SESSION_PREPARING,
Bluetooth: hidp: add new session-management helpers This is a rewrite of the HIDP session management. It implements HIDP as an l2cap_user sub-module so we get proper notification when the underlying connection goes away. The helpers are not yet used but only added in this commit. The old session management is still used and will be removed in a following patch. The old session-management was flawed. Hotplugging is horribly broken and we have no way of getting notified when the underlying connection goes down. The whole idea of removing the HID/input sub-devices from within the session itself is broken and suffers from major dead-locks. We never can guarantee that the session can unregister itself as long as we use synchronous shutdowns. This can only work with asynchronous shutdowns. However, in this case we _must_ be able to unregister the session from the outside as otherwise the l2cap_conn object might be unlinked before we are. The new session-management is based on l2cap_user. There is only one way how to add a session and how to delete a session: "probe" and "remove" callbacks from l2cap_user. This guarantees that the session can be registered and unregistered at _any_ time without any synchronous shutdown. On the other hand, much work has been put into proper session-refcounting. We can unregister/unlink the session only if we can guarantee that it will stay alive. But for asynchronous shutdowns we never know when the last user goes away so we must use proper ref-counting. The old ->conn field has been renamed to ->hconn so we can reuse ->conn in the new session management. No other existing HIDP code is modified. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:46 +00:00
HIDP_SESSION_RUNNING,
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* HIDP session defines */
struct hidp_session {
struct list_head list;
Bluetooth: hidp: add new session-management helpers This is a rewrite of the HIDP session management. It implements HIDP as an l2cap_user sub-module so we get proper notification when the underlying connection goes away. The helpers are not yet used but only added in this commit. The old session management is still used and will be removed in a following patch. The old session-management was flawed. Hotplugging is horribly broken and we have no way of getting notified when the underlying connection goes down. The whole idea of removing the HID/input sub-devices from within the session itself is broken and suffers from major dead-locks. We never can guarantee that the session can unregister itself as long as we use synchronous shutdowns. This can only work with asynchronous shutdowns. However, in this case we _must_ be able to unregister the session from the outside as otherwise the l2cap_conn object might be unlinked before we are. The new session-management is based on l2cap_user. There is only one way how to add a session and how to delete a session: "probe" and "remove" callbacks from l2cap_user. This guarantees that the session can be registered and unregistered at _any_ time without any synchronous shutdown. On the other hand, much work has been put into proper session-refcounting. We can unregister/unlink the session only if we can guarantee that it will stay alive. But for asynchronous shutdowns we never know when the last user goes away so we must use proper ref-counting. The old ->conn field has been renamed to ->hconn so we can reuse ->conn in the new session management. No other existing HIDP code is modified. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:46 +00:00
struct kref ref;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
Bluetooth: hidp: add new session-management helpers This is a rewrite of the HIDP session management. It implements HIDP as an l2cap_user sub-module so we get proper notification when the underlying connection goes away. The helpers are not yet used but only added in this commit. The old session management is still used and will be removed in a following patch. The old session-management was flawed. Hotplugging is horribly broken and we have no way of getting notified when the underlying connection goes down. The whole idea of removing the HID/input sub-devices from within the session itself is broken and suffers from major dead-locks. We never can guarantee that the session can unregister itself as long as we use synchronous shutdowns. This can only work with asynchronous shutdowns. However, in this case we _must_ be able to unregister the session from the outside as otherwise the l2cap_conn object might be unlinked before we are. The new session-management is based on l2cap_user. There is only one way how to add a session and how to delete a session: "probe" and "remove" callbacks from l2cap_user. This guarantees that the session can be registered and unregistered at _any_ time without any synchronous shutdown. On the other hand, much work has been put into proper session-refcounting. We can unregister/unlink the session only if we can guarantee that it will stay alive. But for asynchronous shutdowns we never know when the last user goes away so we must use proper ref-counting. The old ->conn field has been renamed to ->hconn so we can reuse ->conn in the new session management. No other existing HIDP code is modified. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:46 +00:00
/* runtime management */
atomic_t state;
wait_queue_head_t state_queue;
atomic_t terminate;
struct task_struct *task;
unsigned long flags;
Bluetooth: Let HIDP grab the device reference for connections The core exports the hci_conn_hold_device() and hci_conn_put_device() functions for device reference of connections. Use this to ensure that the uevents from the parent are send after the child ones. Based on a report by Brian Rogers <brian@xyzw.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 21:22:15 +00:00
Bluetooth: hidp: add new session-management helpers This is a rewrite of the HIDP session management. It implements HIDP as an l2cap_user sub-module so we get proper notification when the underlying connection goes away. The helpers are not yet used but only added in this commit. The old session management is still used and will be removed in a following patch. The old session-management was flawed. Hotplugging is horribly broken and we have no way of getting notified when the underlying connection goes down. The whole idea of removing the HID/input sub-devices from within the session itself is broken and suffers from major dead-locks. We never can guarantee that the session can unregister itself as long as we use synchronous shutdowns. This can only work with asynchronous shutdowns. However, in this case we _must_ be able to unregister the session from the outside as otherwise the l2cap_conn object might be unlinked before we are. The new session-management is based on l2cap_user. There is only one way how to add a session and how to delete a session: "probe" and "remove" callbacks from l2cap_user. This guarantees that the session can be registered and unregistered at _any_ time without any synchronous shutdown. On the other hand, much work has been put into proper session-refcounting. We can unregister/unlink the session only if we can guarantee that it will stay alive. But for asynchronous shutdowns we never know when the last user goes away so we must use proper ref-counting. The old ->conn field has been renamed to ->hconn so we can reuse ->conn in the new session management. No other existing HIDP code is modified. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:46 +00:00
/* connection management */
bdaddr_t bdaddr;
struct l2cap_conn *conn;
struct l2cap_user user;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct socket *ctrl_sock;
struct socket *intr_sock;
Bluetooth: hidp: add new session-management helpers This is a rewrite of the HIDP session management. It implements HIDP as an l2cap_user sub-module so we get proper notification when the underlying connection goes away. The helpers are not yet used but only added in this commit. The old session management is still used and will be removed in a following patch. The old session-management was flawed. Hotplugging is horribly broken and we have no way of getting notified when the underlying connection goes down. The whole idea of removing the HID/input sub-devices from within the session itself is broken and suffers from major dead-locks. We never can guarantee that the session can unregister itself as long as we use synchronous shutdowns. This can only work with asynchronous shutdowns. However, in this case we _must_ be able to unregister the session from the outside as otherwise the l2cap_conn object might be unlinked before we are. The new session-management is based on l2cap_user. There is only one way how to add a session and how to delete a session: "probe" and "remove" callbacks from l2cap_user. This guarantees that the session can be registered and unregistered at _any_ time without any synchronous shutdown. On the other hand, much work has been put into proper session-refcounting. We can unregister/unlink the session only if we can guarantee that it will stay alive. But for asynchronous shutdowns we never know when the last user goes away so we must use proper ref-counting. The old ->conn field has been renamed to ->hconn so we can reuse ->conn in the new session management. No other existing HIDP code is modified. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:46 +00:00
struct sk_buff_head ctrl_transmit;
struct sk_buff_head intr_transmit;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
uint ctrl_mtu;
uint intr_mtu;
Bluetooth: hidp: add new session-management helpers This is a rewrite of the HIDP session management. It implements HIDP as an l2cap_user sub-module so we get proper notification when the underlying connection goes away. The helpers are not yet used but only added in this commit. The old session management is still used and will be removed in a following patch. The old session-management was flawed. Hotplugging is horribly broken and we have no way of getting notified when the underlying connection goes down. The whole idea of removing the HID/input sub-devices from within the session itself is broken and suffers from major dead-locks. We never can guarantee that the session can unregister itself as long as we use synchronous shutdowns. This can only work with asynchronous shutdowns. However, in this case we _must_ be able to unregister the session from the outside as otherwise the l2cap_conn object might be unlinked before we are. The new session-management is based on l2cap_user. There is only one way how to add a session and how to delete a session: "probe" and "remove" callbacks from l2cap_user. This guarantees that the session can be registered and unregistered at _any_ time without any synchronous shutdown. On the other hand, much work has been put into proper session-refcounting. We can unregister/unlink the session only if we can guarantee that it will stay alive. But for asynchronous shutdowns we never know when the last user goes away so we must use proper ref-counting. The old ->conn field has been renamed to ->hconn so we can reuse ->conn in the new session management. No other existing HIDP code is modified. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:46 +00:00
unsigned long idle_to;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
Bluetooth: hidp: add new session-management helpers This is a rewrite of the HIDP session management. It implements HIDP as an l2cap_user sub-module so we get proper notification when the underlying connection goes away. The helpers are not yet used but only added in this commit. The old session management is still used and will be removed in a following patch. The old session-management was flawed. Hotplugging is horribly broken and we have no way of getting notified when the underlying connection goes down. The whole idea of removing the HID/input sub-devices from within the session itself is broken and suffers from major dead-locks. We never can guarantee that the session can unregister itself as long as we use synchronous shutdowns. This can only work with asynchronous shutdowns. However, in this case we _must_ be able to unregister the session from the outside as otherwise the l2cap_conn object might be unlinked before we are. The new session-management is based on l2cap_user. There is only one way how to add a session and how to delete a session: "probe" and "remove" callbacks from l2cap_user. This guarantees that the session can be registered and unregistered at _any_ time without any synchronous shutdown. On the other hand, much work has been put into proper session-refcounting. We can unregister/unlink the session only if we can guarantee that it will stay alive. But for asynchronous shutdowns we never know when the last user goes away so we must use proper ref-counting. The old ->conn field has been renamed to ->hconn so we can reuse ->conn in the new session management. No other existing HIDP code is modified. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:46 +00:00
/* device management */
HID: Bluetooth: hidp: register HID devices async While l2cap_user callbacks are running, the whole hci_dev is locked. Even if we would add more fine-grained locking to HCI core, it would still be called from the non-reentrant rx work-queue and thus block the event processing. However, if we want to perform synchronous I/O during HID device registration (eg., to perform device-detection), we need the HCI core to be able to dispatch incoming data. Therefore, we now move device-registration to a separate worker. The HCI core can continue running and we add devices asynchronously in another kernel thread. Device removal is synchronized and waits for the worker to exit before calling the usual device removal functions. If l2cap_user->remove is called before the thread registered the devices, we set "terminate" to true and the thread will skip it. If l2cap_user->remove is called after it, we notice this as the device is no longer in HIDP_SESSION_PREPARING state and simply unregister the device as we did before. There is no new deadlock as we now call hidp_session_add_dev() with one lock less held (the HCI lock) and it cannot itself call back into HCI as it was called with the HCI-lock held before. One might wonder whether this can block during device unregistration. But we set "terminate" to true and wake the HIDP thread up _before_ unregistering the HID/input devices. Therefore, all pending HID I/O operations are canceled. All further I/O attempts will fail with ENODEV or EIO. So all latency we can get are few context-switches, but no timeouts or blocking I/O waits! This change also prepares for a long standing HID bug. All HID devices that register power_supply devices need to be able to handle callbacks during registration (a power_supply oddity that cannot easily be fixed). So with this patch available, we can allow HID I/O during registration by calling the recently introduced hid_device_io_start/stop helpers, which currently are a no-op for bluetooth due to this locking. Note that we cannot do the same for input devices. input-core doesn't allow us to call input_event() asynchronously to input_register_device(), which HID-core kindly allows (for good reasons). Fixing input-core to allow this isn't as easy as it sounds and is, beside simplifying HIDP, not really an improvement. Hence, we still register input devices synchronously as we did before. Only HID devices are registered asynchronously. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Daniel Nicoletti <dantti12@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-23 11:10:25 +00:00
struct work_struct dev_init;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct input_dev *input;
[Bluetooth] Add support for using the HID subsystem This patch extends the current Bluetooth HID support to use the new HID subsystem and adds full report mode support. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-02-17 22:58:49 +00:00
struct hid_device *hid;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct timer_list timer;
Bluetooth: hidp: add new session-management helpers This is a rewrite of the HIDP session management. It implements HIDP as an l2cap_user sub-module so we get proper notification when the underlying connection goes away. The helpers are not yet used but only added in this commit. The old session management is still used and will be removed in a following patch. The old session-management was flawed. Hotplugging is horribly broken and we have no way of getting notified when the underlying connection goes down. The whole idea of removing the HID/input sub-devices from within the session itself is broken and suffers from major dead-locks. We never can guarantee that the session can unregister itself as long as we use synchronous shutdowns. This can only work with asynchronous shutdowns. However, in this case we _must_ be able to unregister the session from the outside as otherwise the l2cap_conn object might be unlinked before we are. The new session-management is based on l2cap_user. There is only one way how to add a session and how to delete a session: "probe" and "remove" callbacks from l2cap_user. This guarantees that the session can be registered and unregistered at _any_ time without any synchronous shutdown. On the other hand, much work has been put into proper session-refcounting. We can unregister/unlink the session only if we can guarantee that it will stay alive. But for asynchronous shutdowns we never know when the last user goes away so we must use proper ref-counting. The old ->conn field has been renamed to ->hconn so we can reuse ->conn in the new session management. No other existing HIDP code is modified. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:46 +00:00
/* Report descriptor */
__u8 *rd_data;
uint rd_size;
/* session data */
unsigned char keys[8];
unsigned char leds;
HID: hid, make parsing event driven Next step for complete hid bus, this patch includes: - call parser either from probe or from hid-core if there is no probe. - add ll_driver structure and centralize some stuff there (open, close...) - split and merge usb_hid_configure and hid_probe into several functions to allow hooks/fixes between them Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-05-16 09:49:16 +00:00
HID: bt: Add support for hidraw HIDIOCGFEATURE and HIDIOCSFEATURE This patch adds support or getting and setting feature reports for bluetooth HID devices from HIDRAW. Signed-off-by: Alan Ott <alan@signal11.us> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-18 08:04:40 +00:00
/* Used in hidp_get_raw_report() */
int waiting_report_type; /* HIDP_DATA_RTYPE_* */
int waiting_report_number; /* -1 for not numbered */
struct mutex report_mutex;
struct sk_buff *report_return;
wait_queue_head_t report_queue;
HID: bt: Wait for ACK on Sent Reports Wait for an ACK from the device before returning from hidp_output_raw_report(). This way, failures can be returned to the user application. Also, it prevents ACK/NAK packets from an output packet from being confused with ACK/NAK packets from an input request packet. Signed-off-by: Alan Ott <alan@signal11.us> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-18 08:04:38 +00:00
/* Used in hidp_output_raw_report() */
int output_report_success; /* boolean */
HID: Bluetooth: hidp: make sure input buffers are big enough HID core expects the input buffers to be at least of size 4096 (HID_MAX_BUFFER_SIZE). Other sizes will result in buffer-overflows if an input-report is smaller than advertised. We could, like i2c, compute the biggest report-size instead of using HID_MAX_BUFFER_SIZE, but this will blow up if report-descriptors are changed after ->start() has been called. So lets be safe and just use the biggest buffer we have. Note that this adds an additional copy to the HIDP input path. If there is a way to make sure the skb-buf is big enough, we should use that instead. The best way would be to make hid-core honor the @size argument, though, that sounds easier than it is. So lets just fix the buffer-overflows for now and afterwards look for a faster way for all transport drivers. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-19 11:09:32 +00:00
/* temporary input buffer */
u8 input_buf[HID_MAX_BUFFER_SIZE];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
/* HIDP init defines */
net: 8021q/bluetooth/bridge/can/ceph: Remove extern from function prototypes There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 20:48:22 +00:00
int __init hidp_init_sockets(void);
void __exit hidp_cleanup_sockets(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif /* __HIDP_H */
Reference in a new issue Copy permalink