linux-stable/mm/swap.c

1145 lines
32 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/mm/swap.c
*
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*/
/*
* This file contains the default values for the operation of the
* Linux VM subsystem. Fine-tuning documentation can be found in
* Documentation/admin-guide/sysctl/vm.rst.
* Started 18.12.91
* Swap aging added 23.2.95, Stephen Tweedie.
* Buffermem limits added 12.3.98, Rik van Riel.
*/
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/kernel_stat.h>
#include <linux/swap.h>
#include <linux/mman.h>
#include <linux/pagemap.h>
#include <linux/pagevec.h>
#include <linux/init.h>
#include <linux/export.h>
#include <linux/mm_inline.h>
#include <linux/percpu_counter.h>
#include <linux/memremap.h>
#include <linux/percpu.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
#include <linux/backing-dev.h>
#include <linux/memcontrol.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/gfp.h>
#include <linux/uio.h>
#include <linux/hugetlb.h>
mm: introduce idle page tracking Knowing the portion of memory that is not used by a certain application or memory cgroup (idle memory) can be useful for partitioning the system efficiently, e.g. by setting memory cgroup limits appropriately. Currently, the only means to estimate the amount of idle memory provided by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the access bit for all pages mapped to a particular process by writing 1 to clear_refs, wait for some time, and then count smaps:Referenced. However, this method has two serious shortcomings: - it does not count unmapped file pages - it affects the reclaimer logic To overcome these drawbacks, this patch introduces two new page flags, Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap. A page's Idle flag can only be set from userspace by setting bit in /sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page, and it is cleared whenever the page is accessed either through page tables (it is cleared in page_referenced() in this case) or using the read(2) system call (mark_page_accessed()). Thus by setting the Idle flag for pages of a particular workload, which can be found e.g. by reading /proc/PID/pagemap, waiting for some time to let the workload access its working set, and then reading the bitmap file, one can estimate the amount of pages that are not used by the workload. The Young page flag is used to avoid interference with the memory reclaimer. A page's Young flag is set whenever the Access bit of a page table entry pointing to the page is cleared by writing to the bitmap file. If page_referenced() is called on a Young page, it will add 1 to its return value, therefore concealing the fact that the Access bit was cleared. Note, since there is no room for extra page flags on 32 bit, this feature uses extended page flags when compiled on 32 bit. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: kpageidle requires an MMU] [akpm@linux-foundation.org: decouple from page-flags rework] Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09 22:35:45 +00:00
#include <linux/page_idle.h>
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
#include <linux/local_lock.h>
#include <linux/buffer_head.h>
swap: cull unevictable pages in fault path In the fault paths that install new anonymous pages, check whether the page is evictable or not using lru_cache_add_active_or_unevictable(). If the page is evictable, just add it to the active lru list [via the pagevec cache], else add it to the unevictable list. This "proactive" culling in the fault path mimics the handling of mlocked pages in Nick Piggin's series to keep mlocked pages off the lru lists. Notes: 1) This patch is optional--e.g., if one is concerned about the additional test in the fault path. We can defer the moving of nonreclaimable pages until when vmscan [shrink_*_list()] encounters them. Vmscan will only need to handle such pages once, but if there are a lot of them it could impact system performance. 2) The 'vma' argument to page_evictable() is require to notice that we're faulting a page into an mlock()ed vma w/o having to scan the page's rmap in the fault path. Culling mlock()ed anon pages is currently the only reason for this patch. 3) We can't cull swap pages in read_swap_cache_async() because the vma argument doesn't necessarily correspond to the swap cache offset passed in by swapin_readahead(). This could [did!] result in mlocking pages in non-VM_LOCKED vmas if [when] we tried to cull in this path. 4) Move set_pte_at() to after where we add page to lru to keep it hidden from other tasks that might walk the page table. We already do it in this order in do_anonymous() page. And, these are COW'd anon pages. Is this safe? [riel@redhat.com: undo an overzealous code cleanup] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 03:26:52 +00:00
#include "internal.h"
mm: add tracepoints for LRU activation and insertions Andrew Perepechko reported a problem whereby pages are being prematurely evicted as the mark_page_accessed() hint is ignored for pages that are currently on a pagevec -- http://www.spinics.net/lists/linux-ext4/msg37340.html . Alexey Lyahkov and Robin Dong have also reported problems recently that could be due to hot pages reaching the end of the inactive list too quickly and be reclaimed. Rather than addressing this on a per-filesystem basis, this series aims to fix the mark_page_accessed() interface by deferring what LRU a page is added to pagevec drain time and allowing mark_page_accessed() to call SetPageActive on a pagevec page. Patch 1 adds two tracepoints for LRU page activation and insertion. Using these processes it's possible to build a model of pages in the LRU that can be processed offline. Patch 2 defers making the decision on what LRU to add a page to until when the pagevec is drained. Patch 3 searches the local pagevec for pages to mark PageActive on mark_page_accessed. The changelog explains why only the local pagevec is examined. Patches 4 and 5 tidy up the API. postmark, a dd-based test and fs-mark both single and threaded mode were run but none of them showed any performance degradation or gain as a result of the patch. Using patch 1, I built a *very* basic model of the LRU to examine offline what the average age of different page types on the LRU were in milliseconds. Of course, capturing the trace distorts the test as it's written to local disk but it does not matter for the purposes of this test. The average age of pages in milliseconds were vanilla deferdrain Average age mapped anon: 1454 1250 Average age mapped file: 127841 155552 Average age unmapped anon: 85 235 Average age unmapped file: 73633 38884 Average age unmapped buffers: 74054 116155 The LRU activity was mostly files which you'd expect for a dd-based workload. Note that the average age of buffer pages is increased by the series and it is expected this is due to the fact that the buffer pages are now getting added to the active list when drained from the pagevecs. Note that the average age of the unmapped file data is decreased as they are still added to the inactive list and are reclaimed before the buffers. There is no guarantee this is a universal win for all workloads and it would be nice if the filesystem people gave some thought as to whether this decision is generally a win or a loss. This patch: Using these tracepoints it is possible to model LRU activity and the average residency of pages of different types. This can be used to debug problems related to premature reclaim of pages of particular types. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com> Cc: Andrew Perepechko <anserper@ya.ru> Cc: Robin Dong <sanbai@taobao.com> Cc: Theodore Tso <tytso@mit.edu> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Bernd Schubert <bernd.schubert@fastmail.fm> Cc: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:26 +00:00
#define CREATE_TRACE_POINTS
#include <trace/events/pagemap.h>
/* How many pages do we try to swap or page in/out together? */
int page_cluster;
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
/* Protecting only lru_rotate.pvec which requires disabling interrupts */
struct lru_rotate {
local_lock_t lock;
struct pagevec pvec;
};
static DEFINE_PER_CPU(struct lru_rotate, lru_rotate) = {
.lock = INIT_LOCAL_LOCK(lock),
};
/*
* The following struct pagevec are grouped together because they are protected
* by disabling preemption (and interrupts remain enabled).
*/
struct lru_pvecs {
local_lock_t lock;
struct pagevec lru_add;
struct pagevec lru_deactivate_file;
struct pagevec lru_deactivate;
struct pagevec lru_lazyfree;
#ifdef CONFIG_SMP
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
struct pagevec activate_page;
#endif
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
};
static DEFINE_PER_CPU(struct lru_pvecs, lru_pvecs) = {
.lock = INIT_LOCAL_LOCK(lock),
};
mm: use pagevec to rotate reclaimable page While running some memory intensive load, system response deteriorated just after swap-out started. The cause of this problem is that when a PG_reclaim page is moved to the tail of the inactive LRU list in rotate_reclaimable_page(), lru_lock spin lock is acquired every page writeback . This deteriorates system performance and makes interrupt hold off time longer when swap-out started. Following patch solves this problem. I use pagevec in rotating reclaimable pages to mitigate LRU spin lock contention and reduce interrupt hold off time. I did a test that allocating and touching pages in multiple processes, and pinging to the test machine in flooding mode to measure response under memory intensive load. The test result is: -2.6.23-rc5 --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 53222ms rtt min/avg/max/mdev = 0.074/0.652/172.228/7.176 ms, pipe 11, ipg/ewma 17.746/0.092 ms -2.6.23-rc5-patched --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma 17.314/0.091 ms Max round-trip-time was improved. The test machine spec is that 4CPU(3.16GHz, Hyper-threading enabled) 8GB memory , 8GB swap. I did ping test again to observe performance deterioration caused by taking a ref. -2.6.23-rc6-with-modifiedpatch --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 53386ms rtt min/avg/max/mdev = 0.074/0.110/4.716/0.147 ms, pipe 2, ipg/ewma 17.801/0.129 ms The result for my original patch is as follows. -2.6.23-rc5-with-originalpatch --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma 17.314/0.091 ms The influence to response was small. [akpm@linux-foundation.org: fix uninitalised var warning] [hugh@veritas.com: fix locking] [randy.dunlap@oracle.com: fix function declaration] [hugh@veritas.com: fix BUG at include/linux/mm.h:220!] [hugh@veritas.com: kill redundancy in rotate_reclaimable_page] [hugh@veritas.com: move_tail_pages into lru_add_drain] Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 08:24:52 +00:00
/*
mm/munlock: replace clear_page_mlock() by final clearance Placing munlock_vma_page() at the end of page_remove_rmap() shifts most of the munlocking to clear_page_mlock(), since PageMlocked is typically still set when mapcount has fallen to 0. That is not what we want: we want /proc/vmstat's unevictable_pgs_cleared to remain as a useful check on the integrity of of the mlock/munlock protocol - small numbers are not surprising, but big numbers mean the protocol is not working. That could be easily fixed by placing munlock_vma_page() at the start of page_remove_rmap(); but later in the series we shall want to batch the munlocking, and that too would tend to leave PageMlocked still set at the point when it is checked. So delete clear_page_mlock() now: leave it instead to release_pages() (and __page_cache_release()) to do this backstop clearing of Mlocked, when page refcount has fallen to 0. If a pinned page occasionally gets counted as Mlocked and Unevictable until it is unpinned, that's okay. A slightly regrettable side-effect of this change is that, since release_pages() and __page_cache_release() may be called at interrupt time, those places which update NR_MLOCK with interrupts enabled had better use mod_zone_page_state() than __mod_zone_page_state() (but holding the lruvec lock always has interrupts disabled). This change, forcing Mlocked off when refcount 0 instead of earlier when mapcount 0, is not fundamental: it can be reversed if performance or something else is found to suffer; but this is the easiest way to separate the stats - let's not complicate that without good reason. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:28:05 +00:00
* This path almost never happens for VM activity - pages are normally freed
* via pagevecs. But it gets used by networking - and for compound pages.
*/
static void __page_cache_release(struct page *page)
{
if (PageLRU(page)) {
struct folio *folio = page_folio(page);
struct lruvec *lruvec;
unsigned long flags;
lruvec = folio_lruvec_lock_irqsave(folio, &flags);
del_page_from_lru_list(page, lruvec);
__clear_page_lru_flags(page);
mm/lru: replace pgdat lru_lock with lruvec lock This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:29 +00:00
unlock_page_lruvec_irqrestore(lruvec, flags);
}
mm/munlock: replace clear_page_mlock() by final clearance Placing munlock_vma_page() at the end of page_remove_rmap() shifts most of the munlocking to clear_page_mlock(), since PageMlocked is typically still set when mapcount has fallen to 0. That is not what we want: we want /proc/vmstat's unevictable_pgs_cleared to remain as a useful check on the integrity of of the mlock/munlock protocol - small numbers are not surprising, but big numbers mean the protocol is not working. That could be easily fixed by placing munlock_vma_page() at the start of page_remove_rmap(); but later in the series we shall want to batch the munlocking, and that too would tend to leave PageMlocked still set at the point when it is checked. So delete clear_page_mlock() now: leave it instead to release_pages() (and __page_cache_release()) to do this backstop clearing of Mlocked, when page refcount has fallen to 0. If a pinned page occasionally gets counted as Mlocked and Unevictable until it is unpinned, that's okay. A slightly regrettable side-effect of this change is that, since release_pages() and __page_cache_release() may be called at interrupt time, those places which update NR_MLOCK with interrupts enabled had better use mod_zone_page_state() than __mod_zone_page_state() (but holding the lruvec lock always has interrupts disabled). This change, forcing Mlocked off when refcount 0 instead of earlier when mapcount 0, is not fundamental: it can be reversed if performance or something else is found to suffer; but this is the easiest way to separate the stats - let's not complicate that without good reason. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:28:05 +00:00
/* See comment on PageMlocked in release_pages() */
if (unlikely(PageMlocked(page))) {
int nr_pages = thp_nr_pages(page);
__ClearPageMlocked(page);
mod_zone_page_state(page_zone(page), NR_MLOCK, -nr_pages);
count_vm_events(UNEVICTABLE_PGCLEARED, nr_pages);
}
}
static void __put_single_page(struct page *page)
{
__page_cache_release(page);
mem_cgroup_uncharge(page_folio(page));
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists The per-cpu page allocator (PCP) only stores order-0 pages. This means that all THP and "cheap" high-order allocations including SLUB contends on the zone->lock. This patch extends the PCP allocator to store THP and "cheap" high-order pages. Note that struct per_cpu_pages increases in size to 256 bytes (4 cache lines) on x86-64. Note that this is not necessarily a universal performance win because of how it is implemented. High-order pages can cause pcp->high to be exceeded prematurely for lower-orders so for example, a large number of THP pages being freed could release order-0 pages from the PCP lists. Hence, much depends on the allocation/free pattern as observed by a single CPU to determine if caching helps or hurts a particular workload. That said, basic performance testing passed. The following is a netperf UDP_STREAM test which hits the relevant patches as some of the network allocations are high-order. netperf-udp 5.13.0-rc2 5.13.0-rc2 mm-pcpburst-v3r4 mm-pcphighorder-v1r7 Hmean send-64 261.46 ( 0.00%) 266.30 * 1.85%* Hmean send-128 516.35 ( 0.00%) 536.78 * 3.96%* Hmean send-256 1014.13 ( 0.00%) 1034.63 * 2.02%* Hmean send-1024 3907.65 ( 0.00%) 4046.11 * 3.54%* Hmean send-2048 7492.93 ( 0.00%) 7754.85 * 3.50%* Hmean send-3312 11410.04 ( 0.00%) 11772.32 * 3.18%* Hmean send-4096 13521.95 ( 0.00%) 13912.34 * 2.89%* Hmean send-8192 21660.50 ( 0.00%) 22730.72 * 4.94%* Hmean send-16384 31902.32 ( 0.00%) 32637.50 * 2.30%* Functionally, a patch like this is necessary to make bulk allocation of high-order pages work with similar performance to order-0 bulk allocations. The bulk allocator is not updated in this series as it would have to be determined by bulk allocation users how they want to track the order of pages allocated with the bulk allocator. Link: https://lkml.kernel.org/r/20210611135753.GC30378@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <ziy@nvidia.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:43:08 +00:00
free_unref_page(page, 0);
}
static void __put_compound_page(struct page *page)
{
/*
* __page_cache_release() is supposed to be called for thp, not for
* hugetlb. This is because hugetlb page does never have PageLRU set
* (it's never listed to any LRU lists) and no memcg routines should
* be called for hugetlb (it has a separate hugetlb_cgroup.)
*/
if (!PageHuge(page))
__page_cache_release(page);
destroy_compound_page(page);
}
mm: drop tail page refcounting Tail page refcounting is utterly complicated and painful to support. It uses ->_mapcount on tail pages to store how many times this page is pinned. get_page() bumps ->_mapcount on tail page in addition to ->_count on head. This information is required by split_huge_page() to be able to distribute pins from head of compound page to tails during the split. We will need ->_mapcount to account PTE mappings of subpages of the compound page. We eliminate need in current meaning of ->_mapcount in tail pages by forbidding split entirely if the page is pinned. The only user of tail page refcounting is THP which is marked BROKEN for now. Let's drop all this mess. It makes get_page() and put_page() much simpler. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:52:56 +00:00
void __put_page(struct page *page)
{
mm: remove the extra ZONE_DEVICE struct page refcount ZONE_DEVICE struct pages have an extra reference count that complicates the code for put_page() and several places in the kernel that need to check the reference count to see that a page is not being used (gup, compaction, migration, etc.). Clean up the code so the reference count doesn't need to be treated specially for ZONE_DEVICE pages. Note that this excludes the special idle page wakeup for fsdax pages, which still happens at refcount 1. This is a separate issue and will be sorted out later. Given that only fsdax pages require the notifiacation when the refcount hits 1 now, the PAGEMAP_OPS Kconfig symbol can go away and be replaced with a FS_DAX check for this hook in the put_page fastpath. Based on an earlier patch from Ralph Campbell <rcampbell@nvidia.com>. Link: https://lkml.kernel.org/r/20220210072828.2930359-8-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Chaitanya Kulkarni <kch@nvidia.com> Cc: Christian Knig <christian.koenig@amd.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-16 04:31:36 +00:00
if (unlikely(is_zone_device_page(page)))
free_zone_device_page(page);
else if (unlikely(PageCompound(page)))
mm: drop tail page refcounting Tail page refcounting is utterly complicated and painful to support. It uses ->_mapcount on tail pages to store how many times this page is pinned. get_page() bumps ->_mapcount on tail page in addition to ->_count on head. This information is required by split_huge_page() to be able to distribute pins from head of compound page to tails during the split. We will need ->_mapcount to account PTE mappings of subpages of the compound page. We eliminate need in current meaning of ->_mapcount in tail pages by forbidding split entirely if the page is pinned. The only user of tail page refcounting is THP which is marked BROKEN for now. Let's drop all this mess. It makes get_page() and put_page() much simpler. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:52:56 +00:00
__put_compound_page(page);
else
__put_single_page(page);
}
mm: drop tail page refcounting Tail page refcounting is utterly complicated and painful to support. It uses ->_mapcount on tail pages to store how many times this page is pinned. get_page() bumps ->_mapcount on tail page in addition to ->_count on head. This information is required by split_huge_page() to be able to distribute pins from head of compound page to tails during the split. We will need ->_mapcount to account PTE mappings of subpages of the compound page. We eliminate need in current meaning of ->_mapcount in tail pages by forbidding split entirely if the page is pinned. The only user of tail page refcounting is THP which is marked BROKEN for now. Let's drop all this mess. It makes get_page() and put_page() much simpler. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:52:56 +00:00
EXPORT_SYMBOL(__put_page);
mm: thp: tail page refcounting fix Michel while working on the working set estimation code, noticed that calling get_page_unless_zero() on a random pfn_to_page(random_pfn) wasn't safe, if the pfn ended up being a tail page of a transparent hugepage under splitting by __split_huge_page_refcount(). He then found the problem could also theoretically materialize with page_cache_get_speculative() during the speculative radix tree lookups that uses get_page_unless_zero() in SMP if the radix tree page is freed and reallocated and get_user_pages is called on it before page_cache_get_speculative has a chance to call get_page_unless_zero(). So the best way to fix the problem is to keep page_tail->_count zero at all times. This will guarantee that get_page_unless_zero() can never succeed on any tail page. page_tail->_mapcount is guaranteed zero and is unused for all tail pages of a compound page, so we can simply account the tail page references there and transfer them to tail_page->_count in __split_huge_page_refcount() (in addition to the head_page->_mapcount). While debugging this s/_count/_mapcount/ change I also noticed get_page is called by direct-io.c on pages returned by get_user_pages. That wasn't entirely safe because the two atomic_inc in get_page weren't atomic. As opposed to other get_user_page users like secondary-MMU page fault to establish the shadow pagetables would never call any superflous get_page after get_user_page returns. It's safer to make get_page universally safe for tail pages and to use get_page_foll() within follow_page (inside get_user_pages()). get_page_foll() is safe to do the refcounting for tail pages without taking any locks because it is run within PT lock protected critical sections (PT lock for pte and page_table_lock for pmd_trans_huge). The standard get_page() as invoked by direct-io instead will now take the compound_lock but still only for tail pages. The direct-io paths are usually I/O bound and the compound_lock is per THP so very finegrined, so there's no risk of scalability issues with it. A simple direct-io benchmarks with all lockdep prove locking and spinlock debugging infrastructure enabled shows identical performance and no overhead. So it's worth it. Ideally direct-io should stop calling get_page() on pages returned by get_user_pages(). The spinlock in get_page() is already optimized away for no-THP builds but doing get_page() on tail pages returned by GUP is generally a rare operation and usually only run in I/O paths. This new refcounting on page_tail->_mapcount in addition to avoiding new RCU critical sections will also allow the working set estimation code to work without any further complexity associated to the tail page refcounting with THP. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Michel Lespinasse <walken@google.com> Reviewed-by: Michel Lespinasse <walken@google.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02 20:36:59 +00:00
/**
* put_pages_list() - release a list of pages
* @pages: list of pages threaded on page->lru
*
* Release a list of pages which are strung together on page.lru.
*/
void put_pages_list(struct list_head *pages)
{
struct page *page, *next;
list_for_each_entry_safe(page, next, pages, lru) {
if (!put_page_testzero(page)) {
list_del(&page->lru);
continue;
}
if (PageHead(page)) {
list_del(&page->lru);
__put_compound_page(page);
continue;
}
/* Cannot be PageLRU because it's passed to us using the lru */
}
free_unref_page_list(pages);
INIT_LIST_HEAD(pages);
}
EXPORT_SYMBOL(put_pages_list);
/*
* get_kernel_pages() - pin kernel pages in memory
* @kiov: An array of struct kvec structures
* @nr_segs: number of segments to pin
* @write: pinning for read/write, currently ignored
* @pages: array that receives pointers to the pages pinned.
* Should be at least nr_segs long.
*
* Returns number of pages pinned. This may be fewer than the number requested.
* If nr_segs is 0 or negative, returns 0. If no pages were pinned, returns 0.
* Each page returned must be released with a put_page() call when it is
* finished with.
*/
int get_kernel_pages(const struct kvec *kiov, int nr_segs, int write,
struct page **pages)
{
int seg;
for (seg = 0; seg < nr_segs; seg++) {
if (WARN_ON(kiov[seg].iov_len != PAGE_SIZE))
return seg;
pages[seg] = kmap_to_page(kiov[seg].iov_base);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
get_page(pages[seg]);
}
return seg;
}
EXPORT_SYMBOL_GPL(get_kernel_pages);
static void pagevec_lru_move_fn(struct pagevec *pvec,
mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn Fold the PGROTATED event collection into pagevec_move_tail_fn call back func like other funcs does in pagevec_lru_move_fn. Thus we could save func call pagevec_move_tail(). Now all usage of pagevec_lru_move_fn are same and no needs of its 3rd parameter. It's just simply the calling. No functional change. [lkp@intel.com: found a build issue in the original patch, thanks] Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:56 +00:00
void (*move_fn)(struct page *page, struct lruvec *lruvec))
mm: use pagevec to rotate reclaimable page While running some memory intensive load, system response deteriorated just after swap-out started. The cause of this problem is that when a PG_reclaim page is moved to the tail of the inactive LRU list in rotate_reclaimable_page(), lru_lock spin lock is acquired every page writeback . This deteriorates system performance and makes interrupt hold off time longer when swap-out started. Following patch solves this problem. I use pagevec in rotating reclaimable pages to mitigate LRU spin lock contention and reduce interrupt hold off time. I did a test that allocating and touching pages in multiple processes, and pinging to the test machine in flooding mode to measure response under memory intensive load. The test result is: -2.6.23-rc5 --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 53222ms rtt min/avg/max/mdev = 0.074/0.652/172.228/7.176 ms, pipe 11, ipg/ewma 17.746/0.092 ms -2.6.23-rc5-patched --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma 17.314/0.091 ms Max round-trip-time was improved. The test machine spec is that 4CPU(3.16GHz, Hyper-threading enabled) 8GB memory , 8GB swap. I did ping test again to observe performance deterioration caused by taking a ref. -2.6.23-rc6-with-modifiedpatch --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 53386ms rtt min/avg/max/mdev = 0.074/0.110/4.716/0.147 ms, pipe 2, ipg/ewma 17.801/0.129 ms The result for my original patch is as follows. -2.6.23-rc5-with-originalpatch --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma 17.314/0.091 ms The influence to response was small. [akpm@linux-foundation.org: fix uninitalised var warning] [hugh@veritas.com: fix locking] [randy.dunlap@oracle.com: fix function declaration] [hugh@veritas.com: fix BUG at include/linux/mm.h:220!] [hugh@veritas.com: kill redundancy in rotate_reclaimable_page] [hugh@veritas.com: move_tail_pages into lru_add_drain] Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 08:24:52 +00:00
{
int i;
mm/lru: replace pgdat lru_lock with lruvec lock This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:29 +00:00
struct lruvec *lruvec = NULL;
unsigned long flags = 0;
mm: use pagevec to rotate reclaimable page While running some memory intensive load, system response deteriorated just after swap-out started. The cause of this problem is that when a PG_reclaim page is moved to the tail of the inactive LRU list in rotate_reclaimable_page(), lru_lock spin lock is acquired every page writeback . This deteriorates system performance and makes interrupt hold off time longer when swap-out started. Following patch solves this problem. I use pagevec in rotating reclaimable pages to mitigate LRU spin lock contention and reduce interrupt hold off time. I did a test that allocating and touching pages in multiple processes, and pinging to the test machine in flooding mode to measure response under memory intensive load. The test result is: -2.6.23-rc5 --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 53222ms rtt min/avg/max/mdev = 0.074/0.652/172.228/7.176 ms, pipe 11, ipg/ewma 17.746/0.092 ms -2.6.23-rc5-patched --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma 17.314/0.091 ms Max round-trip-time was improved. The test machine spec is that 4CPU(3.16GHz, Hyper-threading enabled) 8GB memory , 8GB swap. I did ping test again to observe performance deterioration caused by taking a ref. -2.6.23-rc6-with-modifiedpatch --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 53386ms rtt min/avg/max/mdev = 0.074/0.110/4.716/0.147 ms, pipe 2, ipg/ewma 17.801/0.129 ms The result for my original patch is as follows. -2.6.23-rc5-with-originalpatch --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma 17.314/0.091 ms The influence to response was small. [akpm@linux-foundation.org: fix uninitalised var warning] [hugh@veritas.com: fix locking] [randy.dunlap@oracle.com: fix function declaration] [hugh@veritas.com: fix BUG at include/linux/mm.h:220!] [hugh@veritas.com: kill redundancy in rotate_reclaimable_page] [hugh@veritas.com: move_tail_pages into lru_add_drain] Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 08:24:52 +00:00
for (i = 0; i < pagevec_count(pvec); i++) {
struct page *page = pvec->pages[i];
struct folio *folio = page_folio(page);
mm/swap.c: serialize memcg changes in pagevec_lru_move_fn Hugh Dickins' found a memcg change bug on original version: If we want to change the pgdat->lru_lock to memcg's lruvec lock, we have to serialize mem_cgroup_move_account during pagevec_lru_move_fn. The possible bad scenario would like: cpu 0 cpu 1 lruvec = mem_cgroup_page_lruvec() if (!isolate_lru_page()) mem_cgroup_move_account spin_lock_irqsave(&lruvec->lru_lock <== wrong lock. So we need TestClearPageLRU to block isolate_lru_page(), that serializes the memcg change. and then removing the PageLRU check in move_fn callee as the consequence. __pagevec_lru_add_fn() is different from the others, because the pages it deals with are, by definition, not yet on the lru. TestClearPageLRU is not needed and would not work, so __pagevec_lru_add() goes its own way. Link: https://lkml.kernel.org/r/1604566549-62481-17-git-send-email-alex.shi@linux.alibaba.com Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:25 +00:00
/* block memcg migration during page moving between lru */
if (!TestClearPageLRU(page))
continue;
lruvec = folio_lruvec_relock_irqsave(folio, lruvec, &flags);
mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn Fold the PGROTATED event collection into pagevec_move_tail_fn call back func like other funcs does in pagevec_lru_move_fn. Thus we could save func call pagevec_move_tail(). Now all usage of pagevec_lru_move_fn are same and no needs of its 3rd parameter. It's just simply the calling. No functional change. [lkp@intel.com: found a build issue in the original patch, thanks] Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:56 +00:00
(*move_fn)(page, lruvec);
mm/swap.c: serialize memcg changes in pagevec_lru_move_fn Hugh Dickins' found a memcg change bug on original version: If we want to change the pgdat->lru_lock to memcg's lruvec lock, we have to serialize mem_cgroup_move_account during pagevec_lru_move_fn. The possible bad scenario would like: cpu 0 cpu 1 lruvec = mem_cgroup_page_lruvec() if (!isolate_lru_page()) mem_cgroup_move_account spin_lock_irqsave(&lruvec->lru_lock <== wrong lock. So we need TestClearPageLRU to block isolate_lru_page(), that serializes the memcg change. and then removing the PageLRU check in move_fn callee as the consequence. __pagevec_lru_add_fn() is different from the others, because the pages it deals with are, by definition, not yet on the lru. TestClearPageLRU is not needed and would not work, so __pagevec_lru_add() goes its own way. Link: https://lkml.kernel.org/r/1604566549-62481-17-git-send-email-alex.shi@linux.alibaba.com Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:25 +00:00
SetPageLRU(page);
mm: use pagevec to rotate reclaimable page While running some memory intensive load, system response deteriorated just after swap-out started. The cause of this problem is that when a PG_reclaim page is moved to the tail of the inactive LRU list in rotate_reclaimable_page(), lru_lock spin lock is acquired every page writeback . This deteriorates system performance and makes interrupt hold off time longer when swap-out started. Following patch solves this problem. I use pagevec in rotating reclaimable pages to mitigate LRU spin lock contention and reduce interrupt hold off time. I did a test that allocating and touching pages in multiple processes, and pinging to the test machine in flooding mode to measure response under memory intensive load. The test result is: -2.6.23-rc5 --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 53222ms rtt min/avg/max/mdev = 0.074/0.652/172.228/7.176 ms, pipe 11, ipg/ewma 17.746/0.092 ms -2.6.23-rc5-patched --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma 17.314/0.091 ms Max round-trip-time was improved. The test machine spec is that 4CPU(3.16GHz, Hyper-threading enabled) 8GB memory , 8GB swap. I did ping test again to observe performance deterioration caused by taking a ref. -2.6.23-rc6-with-modifiedpatch --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 53386ms rtt min/avg/max/mdev = 0.074/0.110/4.716/0.147 ms, pipe 2, ipg/ewma 17.801/0.129 ms The result for my original patch is as follows. -2.6.23-rc5-with-originalpatch --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma 17.314/0.091 ms The influence to response was small. [akpm@linux-foundation.org: fix uninitalised var warning] [hugh@veritas.com: fix locking] [randy.dunlap@oracle.com: fix function declaration] [hugh@veritas.com: fix BUG at include/linux/mm.h:220!] [hugh@veritas.com: kill redundancy in rotate_reclaimable_page] [hugh@veritas.com: move_tail_pages into lru_add_drain] Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 08:24:52 +00:00
}
mm/lru: replace pgdat lru_lock with lruvec lock This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:29 +00:00
if (lruvec)
unlock_page_lruvec_irqrestore(lruvec, flags);
release_pages(pvec->pages, pvec->nr);
pagevec_reinit(pvec);
}
mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn Fold the PGROTATED event collection into pagevec_move_tail_fn call back func like other funcs does in pagevec_lru_move_fn. Thus we could save func call pagevec_move_tail(). Now all usage of pagevec_lru_move_fn are same and no needs of its 3rd parameter. It's just simply the calling. No functional change. [lkp@intel.com: found a build issue in the original patch, thanks] Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:56 +00:00
static void pagevec_move_tail_fn(struct page *page, struct lruvec *lruvec)
{
struct folio *folio = page_folio(page);
if (!folio_test_unevictable(folio)) {
lruvec_del_folio(lruvec, folio);
folio_clear_active(folio);
lruvec_add_folio_tail(lruvec, folio);
__count_vm_events(PGROTATED, folio_nr_pages(folio));
}
}
mm: disable LRU pagevec during the migration temporarily LRU pagevec holds refcount of pages until the pagevec are drained. It could prevent migration since the refcount of the page is greater than the expection in migration logic. To mitigate the issue, callers of migrate_pages drains LRU pagevec via migrate_prep or lru_add_drain_all before migrate_pages call. However, it's not enough because pages coming into pagevec after the draining call still could stay at the pagevec so it could keep preventing page migration. Since some callers of migrate_pages have retrial logic with LRU draining, the page would migrate at next trail but it is still fragile in that it doesn't close the fundamental race between upcoming LRU pages into pagvec and migration so the migration failure could cause contiguous memory allocation failure in the end. To close the race, this patch disables lru caches(i.e, pagevec) during ongoing migration until migrate is done. Since it's really hard to reproduce, I measured how many times migrate_pages retried with force mode(it is about a fallback to a sync migration) with below debug code. int migrate_pages(struct list_head *from, new_page_t get_new_page, .. .. if (rc && reason == MR_CONTIG_RANGE && pass > 2) { printk(KERN_ERR, "pfn 0x%lx reason %d", page_to_pfn(page), rc); dump_page(page, "fail to migrate"); } The test was repeating android apps launching with cma allocation in background every five seconds. Total cma allocation count was about 500 during the testing. With this patch, the dump_page count was reduced from 400 to 30. The new interface is also useful for memory hotplug which currently drains lru pcp caches after each migration failure. This is rather suboptimal as it has to disrupt others running during the operation. With the new interface the operation happens only once. This is also in line with pcp allocator cache which are disabled for the offlining as well. Link: https://lkml.kernel.org/r/20210319175127.886124-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Chris Goldsworthy <cgoldswo@codeaurora.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Oliver Sang <oliver.sang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:36:54 +00:00
/* return true if pagevec needs to drain */
static bool pagevec_add_and_need_flush(struct pagevec *pvec, struct page *page)
{
bool ret = false;
if (!pagevec_add(pvec, page) || PageCompound(page) ||
lru_cache_disabled())
ret = true;
return ret;
}
/*
* Writeback is about to end against a folio which has been marked for
* immediate reclaim. If it still appears to be reclaimable, move it
* to the tail of the inactive list.
mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn Fold the PGROTATED event collection into pagevec_move_tail_fn call back func like other funcs does in pagevec_lru_move_fn. Thus we could save func call pagevec_move_tail(). Now all usage of pagevec_lru_move_fn are same and no needs of its 3rd parameter. It's just simply the calling. No functional change. [lkp@intel.com: found a build issue in the original patch, thanks] Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:56 +00:00
*
* folio_rotate_reclaimable() must disable IRQs, to prevent nasty races.
*/
void folio_rotate_reclaimable(struct folio *folio)
{
if (!folio_test_locked(folio) && !folio_test_dirty(folio) &&
!folio_test_unevictable(folio) && folio_test_lru(folio)) {
struct pagevec *pvec;
unsigned long flags;
folio_get(folio);
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
local_lock_irqsave(&lru_rotate.lock, flags);
pvec = this_cpu_ptr(&lru_rotate.pvec);
if (pagevec_add_and_need_flush(pvec, &folio->page))
mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn Fold the PGROTATED event collection into pagevec_move_tail_fn call back func like other funcs does in pagevec_lru_move_fn. Thus we could save func call pagevec_move_tail(). Now all usage of pagevec_lru_move_fn are same and no needs of its 3rd parameter. It's just simply the calling. No functional change. [lkp@intel.com: found a build issue in the original patch, thanks] Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:56 +00:00
pagevec_lru_move_fn(pvec, pagevec_move_tail_fn);
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
local_unlock_irqrestore(&lru_rotate.lock, flags);
}
}
mm: vmscan: reclaim writepage is IO cost The VM tries to balance reclaim pressure between anon and file so as to reduce the amount of IO incurred due to the memory shortage. It already counts refaults and swapins, but in addition it should also count writepage calls during reclaim. For swap, this is obvious: it's IO that wouldn't have occurred if the anonymous memory hadn't been under memory pressure. From a relative balancing point of view this makes sense as well: even if anon is cold and reclaimable, a cache that isn't thrashing may have equally cold pages that don't require IO to reclaim. For file writeback, it's trickier: some of the reclaim writepage IO would have likely occurred anyway due to dirty expiration. But not all of it - premature writeback reduces batching and generates additional writes. Since the flushers are already woken up by the time the VM starts writing cache pages one by one, let's assume that we'e likely causing writes that wouldn't have happened without memory pressure. In addition, the per-page cost of IO would have probably been much cheaper if written in larger batches from the flusher thread rather than the single-page-writes from kswapd. For our purposes - getting the trend right to accelerate convergence on a stable state that doesn't require paging at all - this is sufficiently accurate. If we later wanted to optimize for sustained thrashing, we can still refine the measurements. Count all writepage calls from kswapd as IO cost toward the LRU that the page belongs to. Why do this dynamically? Don't we know in advance that anon pages require IO to reclaim, and so could build in a static bias? First, scanning is not the same as reclaiming. If all the anon pages are referenced, we may not swap for a while just because we're scanning the anon list. During this time, however, it's important that we age anonymous memory and the page cache at the same rate so that their hot-cold gradients are comparable. Everything else being equal, we still want to reclaim the coldest memory overall. Second, we keep copies in swap unless the page changes. If there is swap-backed data that's mostly read (tmpfs file) and has been swapped out before, we can reclaim it without incurring additional IO. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Link: http://lkml.kernel.org/r/20200520232525.798933-14-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:03:09 +00:00
void lru_note_cost(struct lruvec *lruvec, bool file, unsigned int nr_pages)
{
mm: vmscan: determine anon/file pressure balance at the reclaim root We split the LRU lists into anon and file, and we rebalance the scan pressure between them when one of them begins thrashing: if the file cache experiences workingset refaults, we increase the pressure on anonymous pages; if the workload is stalled on swapins, we increase the pressure on the file cache instead. With cgroups and their nested LRU lists, we currently don't do this correctly. While recursive cgroup reclaim establishes a relative LRU order among the pages of all involved cgroups, LRU pressure balancing is done on an individual cgroup LRU level. As a result, when one cgroup is thrashing on the filesystem cache while a sibling may have cold anonymous pages, pressure doesn't get equalized between them. This patch moves LRU balancing decision to the root of reclaim - the same level where the LRU order is established. It does this by tracking LRU cost recursively, so that every level of the cgroup tree knows the aggregate LRU cost of all memory within its domain. When the page scanner calculates the scan balance for any given individual cgroup's LRU list, it uses the values from the ancestor cgroup that initiated the reclaim cycle. If one sibling is then thrashing on the cache, it will tip the pressure balance inside its ancestors, and the next hierarchical reclaim iteration will go more after the anon pages in the tree. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Link: http://lkml.kernel.org/r/20200520232525.798933-13-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:03:06 +00:00
do {
unsigned long lrusize;
mm/lru: replace pgdat lru_lock with lruvec lock This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:29 +00:00
/*
* Hold lruvec->lru_lock is safe here, since
* 1) The pinned lruvec in reclaim, or
* 2) From a pre-LRU page during refault (which also holds the
* rcu lock, so would be safe even if the page was on the LRU
* and could move simultaneously to a new lruvec).
*/
spin_lock_irq(&lruvec->lru_lock);
mm: vmscan: determine anon/file pressure balance at the reclaim root We split the LRU lists into anon and file, and we rebalance the scan pressure between them when one of them begins thrashing: if the file cache experiences workingset refaults, we increase the pressure on anonymous pages; if the workload is stalled on swapins, we increase the pressure on the file cache instead. With cgroups and their nested LRU lists, we currently don't do this correctly. While recursive cgroup reclaim establishes a relative LRU order among the pages of all involved cgroups, LRU pressure balancing is done on an individual cgroup LRU level. As a result, when one cgroup is thrashing on the filesystem cache while a sibling may have cold anonymous pages, pressure doesn't get equalized between them. This patch moves LRU balancing decision to the root of reclaim - the same level where the LRU order is established. It does this by tracking LRU cost recursively, so that every level of the cgroup tree knows the aggregate LRU cost of all memory within its domain. When the page scanner calculates the scan balance for any given individual cgroup's LRU list, it uses the values from the ancestor cgroup that initiated the reclaim cycle. If one sibling is then thrashing on the cache, it will tip the pressure balance inside its ancestors, and the next hierarchical reclaim iteration will go more after the anon pages in the tree. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Link: http://lkml.kernel.org/r/20200520232525.798933-13-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:03:06 +00:00
/* Record cost event */
mm: vmscan: reclaim writepage is IO cost The VM tries to balance reclaim pressure between anon and file so as to reduce the amount of IO incurred due to the memory shortage. It already counts refaults and swapins, but in addition it should also count writepage calls during reclaim. For swap, this is obvious: it's IO that wouldn't have occurred if the anonymous memory hadn't been under memory pressure. From a relative balancing point of view this makes sense as well: even if anon is cold and reclaimable, a cache that isn't thrashing may have equally cold pages that don't require IO to reclaim. For file writeback, it's trickier: some of the reclaim writepage IO would have likely occurred anyway due to dirty expiration. But not all of it - premature writeback reduces batching and generates additional writes. Since the flushers are already woken up by the time the VM starts writing cache pages one by one, let's assume that we'e likely causing writes that wouldn't have happened without memory pressure. In addition, the per-page cost of IO would have probably been much cheaper if written in larger batches from the flusher thread rather than the single-page-writes from kswapd. For our purposes - getting the trend right to accelerate convergence on a stable state that doesn't require paging at all - this is sufficiently accurate. If we later wanted to optimize for sustained thrashing, we can still refine the measurements. Count all writepage calls from kswapd as IO cost toward the LRU that the page belongs to. Why do this dynamically? Don't we know in advance that anon pages require IO to reclaim, and so could build in a static bias? First, scanning is not the same as reclaiming. If all the anon pages are referenced, we may not swap for a while just because we're scanning the anon list. During this time, however, it's important that we age anonymous memory and the page cache at the same rate so that their hot-cold gradients are comparable. Everything else being equal, we still want to reclaim the coldest memory overall. Second, we keep copies in swap unless the page changes. If there is swap-backed data that's mostly read (tmpfs file) and has been swapped out before, we can reclaim it without incurring additional IO. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Link: http://lkml.kernel.org/r/20200520232525.798933-14-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:03:09 +00:00
if (file)
lruvec->file_cost += nr_pages;
mm: vmscan: determine anon/file pressure balance at the reclaim root We split the LRU lists into anon and file, and we rebalance the scan pressure between them when one of them begins thrashing: if the file cache experiences workingset refaults, we increase the pressure on anonymous pages; if the workload is stalled on swapins, we increase the pressure on the file cache instead. With cgroups and their nested LRU lists, we currently don't do this correctly. While recursive cgroup reclaim establishes a relative LRU order among the pages of all involved cgroups, LRU pressure balancing is done on an individual cgroup LRU level. As a result, when one cgroup is thrashing on the filesystem cache while a sibling may have cold anonymous pages, pressure doesn't get equalized between them. This patch moves LRU balancing decision to the root of reclaim - the same level where the LRU order is established. It does this by tracking LRU cost recursively, so that every level of the cgroup tree knows the aggregate LRU cost of all memory within its domain. When the page scanner calculates the scan balance for any given individual cgroup's LRU list, it uses the values from the ancestor cgroup that initiated the reclaim cycle. If one sibling is then thrashing on the cache, it will tip the pressure balance inside its ancestors, and the next hierarchical reclaim iteration will go more after the anon pages in the tree. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Link: http://lkml.kernel.org/r/20200520232525.798933-13-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:03:06 +00:00
else
mm: vmscan: reclaim writepage is IO cost The VM tries to balance reclaim pressure between anon and file so as to reduce the amount of IO incurred due to the memory shortage. It already counts refaults and swapins, but in addition it should also count writepage calls during reclaim. For swap, this is obvious: it's IO that wouldn't have occurred if the anonymous memory hadn't been under memory pressure. From a relative balancing point of view this makes sense as well: even if anon is cold and reclaimable, a cache that isn't thrashing may have equally cold pages that don't require IO to reclaim. For file writeback, it's trickier: some of the reclaim writepage IO would have likely occurred anyway due to dirty expiration. But not all of it - premature writeback reduces batching and generates additional writes. Since the flushers are already woken up by the time the VM starts writing cache pages one by one, let's assume that we'e likely causing writes that wouldn't have happened without memory pressure. In addition, the per-page cost of IO would have probably been much cheaper if written in larger batches from the flusher thread rather than the single-page-writes from kswapd. For our purposes - getting the trend right to accelerate convergence on a stable state that doesn't require paging at all - this is sufficiently accurate. If we later wanted to optimize for sustained thrashing, we can still refine the measurements. Count all writepage calls from kswapd as IO cost toward the LRU that the page belongs to. Why do this dynamically? Don't we know in advance that anon pages require IO to reclaim, and so could build in a static bias? First, scanning is not the same as reclaiming. If all the anon pages are referenced, we may not swap for a while just because we're scanning the anon list. During this time, however, it's important that we age anonymous memory and the page cache at the same rate so that their hot-cold gradients are comparable. Everything else being equal, we still want to reclaim the coldest memory overall. Second, we keep copies in swap unless the page changes. If there is swap-backed data that's mostly read (tmpfs file) and has been swapped out before, we can reclaim it without incurring additional IO. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Link: http://lkml.kernel.org/r/20200520232525.798933-14-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:03:09 +00:00
lruvec->anon_cost += nr_pages;
mm: vmscan: determine anon/file pressure balance at the reclaim root We split the LRU lists into anon and file, and we rebalance the scan pressure between them when one of them begins thrashing: if the file cache experiences workingset refaults, we increase the pressure on anonymous pages; if the workload is stalled on swapins, we increase the pressure on the file cache instead. With cgroups and their nested LRU lists, we currently don't do this correctly. While recursive cgroup reclaim establishes a relative LRU order among the pages of all involved cgroups, LRU pressure balancing is done on an individual cgroup LRU level. As a result, when one cgroup is thrashing on the filesystem cache while a sibling may have cold anonymous pages, pressure doesn't get equalized between them. This patch moves LRU balancing decision to the root of reclaim - the same level where the LRU order is established. It does this by tracking LRU cost recursively, so that every level of the cgroup tree knows the aggregate LRU cost of all memory within its domain. When the page scanner calculates the scan balance for any given individual cgroup's LRU list, it uses the values from the ancestor cgroup that initiated the reclaim cycle. If one sibling is then thrashing on the cache, it will tip the pressure balance inside its ancestors, and the next hierarchical reclaim iteration will go more after the anon pages in the tree. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Link: http://lkml.kernel.org/r/20200520232525.798933-13-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:03:06 +00:00
/*
* Decay previous events
*
* Because workloads change over time (and to avoid
* overflow) we keep these statistics as a floating
* average, which ends up weighing recent refaults
* more than old ones.
*/
lrusize = lruvec_page_state(lruvec, NR_INACTIVE_ANON) +
lruvec_page_state(lruvec, NR_ACTIVE_ANON) +
lruvec_page_state(lruvec, NR_INACTIVE_FILE) +
lruvec_page_state(lruvec, NR_ACTIVE_FILE);
if (lruvec->file_cost + lruvec->anon_cost > lrusize / 4) {
lruvec->file_cost /= 2;
lruvec->anon_cost /= 2;
}
mm/lru: replace pgdat lru_lock with lruvec lock This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:29 +00:00
spin_unlock_irq(&lruvec->lru_lock);
mm: vmscan: determine anon/file pressure balance at the reclaim root We split the LRU lists into anon and file, and we rebalance the scan pressure between them when one of them begins thrashing: if the file cache experiences workingset refaults, we increase the pressure on anonymous pages; if the workload is stalled on swapins, we increase the pressure on the file cache instead. With cgroups and their nested LRU lists, we currently don't do this correctly. While recursive cgroup reclaim establishes a relative LRU order among the pages of all involved cgroups, LRU pressure balancing is done on an individual cgroup LRU level. As a result, when one cgroup is thrashing on the filesystem cache while a sibling may have cold anonymous pages, pressure doesn't get equalized between them. This patch moves LRU balancing decision to the root of reclaim - the same level where the LRU order is established. It does this by tracking LRU cost recursively, so that every level of the cgroup tree knows the aggregate LRU cost of all memory within its domain. When the page scanner calculates the scan balance for any given individual cgroup's LRU list, it uses the values from the ancestor cgroup that initiated the reclaim cycle. If one sibling is then thrashing on the cache, it will tip the pressure balance inside its ancestors, and the next hierarchical reclaim iteration will go more after the anon pages in the tree. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Link: http://lkml.kernel.org/r/20200520232525.798933-13-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:03:06 +00:00
} while ((lruvec = parent_lruvec(lruvec)));
}
void lru_note_cost_folio(struct folio *folio)
mm: vmscan: reclaim writepage is IO cost The VM tries to balance reclaim pressure between anon and file so as to reduce the amount of IO incurred due to the memory shortage. It already counts refaults and swapins, but in addition it should also count writepage calls during reclaim. For swap, this is obvious: it's IO that wouldn't have occurred if the anonymous memory hadn't been under memory pressure. From a relative balancing point of view this makes sense as well: even if anon is cold and reclaimable, a cache that isn't thrashing may have equally cold pages that don't require IO to reclaim. For file writeback, it's trickier: some of the reclaim writepage IO would have likely occurred anyway due to dirty expiration. But not all of it - premature writeback reduces batching and generates additional writes. Since the flushers are already woken up by the time the VM starts writing cache pages one by one, let's assume that we'e likely causing writes that wouldn't have happened without memory pressure. In addition, the per-page cost of IO would have probably been much cheaper if written in larger batches from the flusher thread rather than the single-page-writes from kswapd. For our purposes - getting the trend right to accelerate convergence on a stable state that doesn't require paging at all - this is sufficiently accurate. If we later wanted to optimize for sustained thrashing, we can still refine the measurements. Count all writepage calls from kswapd as IO cost toward the LRU that the page belongs to. Why do this dynamically? Don't we know in advance that anon pages require IO to reclaim, and so could build in a static bias? First, scanning is not the same as reclaiming. If all the anon pages are referenced, we may not swap for a while just because we're scanning the anon list. During this time, however, it's important that we age anonymous memory and the page cache at the same rate so that their hot-cold gradients are comparable. Everything else being equal, we still want to reclaim the coldest memory overall. Second, we keep copies in swap unless the page changes. If there is swap-backed data that's mostly read (tmpfs file) and has been swapped out before, we can reclaim it without incurring additional IO. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Link: http://lkml.kernel.org/r/20200520232525.798933-14-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:03:09 +00:00
{
lru_note_cost(folio_lruvec(folio), folio_is_file_lru(folio),
folio_nr_pages(folio));
mm: vmscan: reclaim writepage is IO cost The VM tries to balance reclaim pressure between anon and file so as to reduce the amount of IO incurred due to the memory shortage. It already counts refaults and swapins, but in addition it should also count writepage calls during reclaim. For swap, this is obvious: it's IO that wouldn't have occurred if the anonymous memory hadn't been under memory pressure. From a relative balancing point of view this makes sense as well: even if anon is cold and reclaimable, a cache that isn't thrashing may have equally cold pages that don't require IO to reclaim. For file writeback, it's trickier: some of the reclaim writepage IO would have likely occurred anyway due to dirty expiration. But not all of it - premature writeback reduces batching and generates additional writes. Since the flushers are already woken up by the time the VM starts writing cache pages one by one, let's assume that we'e likely causing writes that wouldn't have happened without memory pressure. In addition, the per-page cost of IO would have probably been much cheaper if written in larger batches from the flusher thread rather than the single-page-writes from kswapd. For our purposes - getting the trend right to accelerate convergence on a stable state that doesn't require paging at all - this is sufficiently accurate. If we later wanted to optimize for sustained thrashing, we can still refine the measurements. Count all writepage calls from kswapd as IO cost toward the LRU that the page belongs to. Why do this dynamically? Don't we know in advance that anon pages require IO to reclaim, and so could build in a static bias? First, scanning is not the same as reclaiming. If all the anon pages are referenced, we may not swap for a while just because we're scanning the anon list. During this time, however, it's important that we age anonymous memory and the page cache at the same rate so that their hot-cold gradients are comparable. Everything else being equal, we still want to reclaim the coldest memory overall. Second, we keep copies in swap unless the page changes. If there is swap-backed data that's mostly read (tmpfs file) and has been swapped out before, we can reclaim it without incurring additional IO. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Link: http://lkml.kernel.org/r/20200520232525.798933-14-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:03:09 +00:00
}
static void __folio_activate(struct folio *folio, struct lruvec *lruvec)
{
if (!folio_test_active(folio) && !folio_test_unevictable(folio)) {
long nr_pages = folio_nr_pages(folio);
mm: batch activate_page() to reduce lock contention The zone->lru_lock is heavily contented in workload where activate_page() is frequently used. We could do batch activate_page() to reduce the lock contention. The batched pages will be added into zone list when the pool is full or page reclaim is trying to drain them. For example, in a 4 socket 64 CPU system, create a sparse file and 64 processes, processes shared map to the file. Each process read access the whole file and then exit. The process exit will do unmap_vmas() and cause a lot of activate_page() call. In such workload, we saw about 58% total time reduction with below patch. Other workloads with a lot of activate_page also benefits a lot too. I tested some microbenchmarks: case-anon-cow-rand-mt 0.58% case-anon-cow-rand -3.30% case-anon-cow-seq-mt -0.51% case-anon-cow-seq -5.68% case-anon-r-rand-mt 0.23% case-anon-r-rand 0.81% case-anon-r-seq-mt -0.71% case-anon-r-seq -1.99% case-anon-rx-rand-mt 2.11% case-anon-rx-seq-mt 3.46% case-anon-w-rand-mt -0.03% case-anon-w-rand -0.50% case-anon-w-seq-mt -1.08% case-anon-w-seq -0.12% case-anon-wx-rand-mt -5.02% case-anon-wx-seq-mt -1.43% case-fork 1.65% case-fork-sleep -0.07% case-fork-withmem 1.39% case-hugetlb -0.59% case-lru-file-mmap-read-mt -0.54% case-lru-file-mmap-read 0.61% case-lru-file-mmap-read-rand -2.24% case-lru-file-readonce -0.64% case-lru-file-readtwice -11.69% case-lru-memcg -1.35% case-mmap-pread-rand-mt 1.88% case-mmap-pread-rand -15.26% case-mmap-pread-seq-mt 0.89% case-mmap-pread-seq -69.72% case-mmap-xread-rand-mt 0.71% case-mmap-xread-seq-mt 0.38% The most significent are: case-lru-file-readtwice -11.69% case-mmap-pread-rand -15.26% case-mmap-pread-seq -69.72% which use activate_page a lot. others are basically variations because each run has slightly difference. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 23:47:34 +00:00
lruvec_del_folio(lruvec, folio);
folio_set_active(folio);
lruvec_add_folio(lruvec, folio);
trace_mm_lru_activate(folio);
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 03:26:32 +00:00
__count_vm_events(PGACTIVATE, nr_pages);
__count_memcg_events(lruvec_memcg(lruvec), PGACTIVATE,
nr_pages);
}
mm: batch activate_page() to reduce lock contention The zone->lru_lock is heavily contented in workload where activate_page() is frequently used. We could do batch activate_page() to reduce the lock contention. The batched pages will be added into zone list when the pool is full or page reclaim is trying to drain them. For example, in a 4 socket 64 CPU system, create a sparse file and 64 processes, processes shared map to the file. Each process read access the whole file and then exit. The process exit will do unmap_vmas() and cause a lot of activate_page() call. In such workload, we saw about 58% total time reduction with below patch. Other workloads with a lot of activate_page also benefits a lot too. Andrew Morton suggested activate_page() and putback_lru_pages() should follow the same path to active pages, but this is hard to implement (see commit 7a608572a282a ("Revert "mm: batch activate_page() to reduce lock contention")). On the other hand, do we really need putback_lru_pages() to follow the same path? I tested several FIO/FFSB benchmark (about 20 scripts for each benchmark) in 3 machines here from 2 sockets to 4 sockets. My test doesn't show anything significant with/without below patch (there is slight difference but mostly some noise which we found even without below patch before). Below patch basically returns to the same as my first post. I tested some microbenchmarks: case-anon-cow-rand-mt 0.58% case-anon-cow-rand -3.30% case-anon-cow-seq-mt -0.51% case-anon-cow-seq -5.68% case-anon-r-rand-mt 0.23% case-anon-r-rand 0.81% case-anon-r-seq-mt -0.71% case-anon-r-seq -1.99% case-anon-rx-rand-mt 2.11% case-anon-rx-seq-mt 3.46% case-anon-w-rand-mt -0.03% case-anon-w-rand -0.50% case-anon-w-seq-mt -1.08% case-anon-w-seq -0.12% case-anon-wx-rand-mt -5.02% case-anon-wx-seq-mt -1.43% case-fork 1.65% case-fork-sleep -0.07% case-fork-withmem 1.39% case-hugetlb -0.59% case-lru-file-mmap-read-mt -0.54% case-lru-file-mmap-read 0.61% case-lru-file-mmap-read-rand -2.24% case-lru-file-readonce -0.64% case-lru-file-readtwice -11.69% case-lru-memcg -1.35% case-mmap-pread-rand-mt 1.88% case-mmap-pread-rand -15.26% case-mmap-pread-seq-mt 0.89% case-mmap-pread-seq -69.72% case-mmap-xread-rand-mt 0.71% case-mmap-xread-seq-mt 0.38% The most significent are: case-lru-file-readtwice -11.69% case-mmap-pread-rand -15.26% case-mmap-pread-seq -69.72% which use activate_page a lot. others are basically variations because each run has slightly difference. In UP case, 'size mm/swap.o' before the two patches: text data bss dec hex filename 6466 896 4 7366 1cc6 mm/swap.o after the two patches: text data bss dec hex filename 6343 896 4 7243 1c4b mm/swap.o Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:12:55 +00:00
}
#ifdef CONFIG_SMP
static void __activate_page(struct page *page, struct lruvec *lruvec)
{
return __folio_activate(page_folio(page), lruvec);
}
mm: batch activate_page() to reduce lock contention The zone->lru_lock is heavily contented in workload where activate_page() is frequently used. We could do batch activate_page() to reduce the lock contention. The batched pages will be added into zone list when the pool is full or page reclaim is trying to drain them. For example, in a 4 socket 64 CPU system, create a sparse file and 64 processes, processes shared map to the file. Each process read access the whole file and then exit. The process exit will do unmap_vmas() and cause a lot of activate_page() call. In such workload, we saw about 58% total time reduction with below patch. Other workloads with a lot of activate_page also benefits a lot too. Andrew Morton suggested activate_page() and putback_lru_pages() should follow the same path to active pages, but this is hard to implement (see commit 7a608572a282a ("Revert "mm: batch activate_page() to reduce lock contention")). On the other hand, do we really need putback_lru_pages() to follow the same path? I tested several FIO/FFSB benchmark (about 20 scripts for each benchmark) in 3 machines here from 2 sockets to 4 sockets. My test doesn't show anything significant with/without below patch (there is slight difference but mostly some noise which we found even without below patch before). Below patch basically returns to the same as my first post. I tested some microbenchmarks: case-anon-cow-rand-mt 0.58% case-anon-cow-rand -3.30% case-anon-cow-seq-mt -0.51% case-anon-cow-seq -5.68% case-anon-r-rand-mt 0.23% case-anon-r-rand 0.81% case-anon-r-seq-mt -0.71% case-anon-r-seq -1.99% case-anon-rx-rand-mt 2.11% case-anon-rx-seq-mt 3.46% case-anon-w-rand-mt -0.03% case-anon-w-rand -0.50% case-anon-w-seq-mt -1.08% case-anon-w-seq -0.12% case-anon-wx-rand-mt -5.02% case-anon-wx-seq-mt -1.43% case-fork 1.65% case-fork-sleep -0.07% case-fork-withmem 1.39% case-hugetlb -0.59% case-lru-file-mmap-read-mt -0.54% case-lru-file-mmap-read 0.61% case-lru-file-mmap-read-rand -2.24% case-lru-file-readonce -0.64% case-lru-file-readtwice -11.69% case-lru-memcg -1.35% case-mmap-pread-rand-mt 1.88% case-mmap-pread-rand -15.26% case-mmap-pread-seq-mt 0.89% case-mmap-pread-seq -69.72% case-mmap-xread-rand-mt 0.71% case-mmap-xread-seq-mt 0.38% The most significent are: case-lru-file-readtwice -11.69% case-mmap-pread-rand -15.26% case-mmap-pread-seq -69.72% which use activate_page a lot. others are basically variations because each run has slightly difference. In UP case, 'size mm/swap.o' before the two patches: text data bss dec hex filename 6466 896 4 7366 1cc6 mm/swap.o after the two patches: text data bss dec hex filename 6343 896 4 7243 1c4b mm/swap.o Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:12:55 +00:00
static void activate_page_drain(int cpu)
{
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
struct pagevec *pvec = &per_cpu(lru_pvecs.activate_page, cpu);
mm: batch activate_page() to reduce lock contention The zone->lru_lock is heavily contented in workload where activate_page() is frequently used. We could do batch activate_page() to reduce the lock contention. The batched pages will be added into zone list when the pool is full or page reclaim is trying to drain them. For example, in a 4 socket 64 CPU system, create a sparse file and 64 processes, processes shared map to the file. Each process read access the whole file and then exit. The process exit will do unmap_vmas() and cause a lot of activate_page() call. In such workload, we saw about 58% total time reduction with below patch. Other workloads with a lot of activate_page also benefits a lot too. Andrew Morton suggested activate_page() and putback_lru_pages() should follow the same path to active pages, but this is hard to implement (see commit 7a608572a282a ("Revert "mm: batch activate_page() to reduce lock contention")). On the other hand, do we really need putback_lru_pages() to follow the same path? I tested several FIO/FFSB benchmark (about 20 scripts for each benchmark) in 3 machines here from 2 sockets to 4 sockets. My test doesn't show anything significant with/without below patch (there is slight difference but mostly some noise which we found even without below patch before). Below patch basically returns to the same as my first post. I tested some microbenchmarks: case-anon-cow-rand-mt 0.58% case-anon-cow-rand -3.30% case-anon-cow-seq-mt -0.51% case-anon-cow-seq -5.68% case-anon-r-rand-mt 0.23% case-anon-r-rand 0.81% case-anon-r-seq-mt -0.71% case-anon-r-seq -1.99% case-anon-rx-rand-mt 2.11% case-anon-rx-seq-mt 3.46% case-anon-w-rand-mt -0.03% case-anon-w-rand -0.50% case-anon-w-seq-mt -1.08% case-anon-w-seq -0.12% case-anon-wx-rand-mt -5.02% case-anon-wx-seq-mt -1.43% case-fork 1.65% case-fork-sleep -0.07% case-fork-withmem 1.39% case-hugetlb -0.59% case-lru-file-mmap-read-mt -0.54% case-lru-file-mmap-read 0.61% case-lru-file-mmap-read-rand -2.24% case-lru-file-readonce -0.64% case-lru-file-readtwice -11.69% case-lru-memcg -1.35% case-mmap-pread-rand-mt 1.88% case-mmap-pread-rand -15.26% case-mmap-pread-seq-mt 0.89% case-mmap-pread-seq -69.72% case-mmap-xread-rand-mt 0.71% case-mmap-xread-seq-mt 0.38% The most significent are: case-lru-file-readtwice -11.69% case-mmap-pread-rand -15.26% case-mmap-pread-seq -69.72% which use activate_page a lot. others are basically variations because each run has slightly difference. In UP case, 'size mm/swap.o' before the two patches: text data bss dec hex filename 6466 896 4 7366 1cc6 mm/swap.o after the two patches: text data bss dec hex filename 6343 896 4 7243 1c4b mm/swap.o Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:12:55 +00:00
if (pagevec_count(pvec))
mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn Fold the PGROTATED event collection into pagevec_move_tail_fn call back func like other funcs does in pagevec_lru_move_fn. Thus we could save func call pagevec_move_tail(). Now all usage of pagevec_lru_move_fn are same and no needs of its 3rd parameter. It's just simply the calling. No functional change. [lkp@intel.com: found a build issue in the original patch, thanks] Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:56 +00:00
pagevec_lru_move_fn(pvec, __activate_page);
mm: batch activate_page() to reduce lock contention The zone->lru_lock is heavily contented in workload where activate_page() is frequently used. We could do batch activate_page() to reduce the lock contention. The batched pages will be added into zone list when the pool is full or page reclaim is trying to drain them. For example, in a 4 socket 64 CPU system, create a sparse file and 64 processes, processes shared map to the file. Each process read access the whole file and then exit. The process exit will do unmap_vmas() and cause a lot of activate_page() call. In such workload, we saw about 58% total time reduction with below patch. Other workloads with a lot of activate_page also benefits a lot too. Andrew Morton suggested activate_page() and putback_lru_pages() should follow the same path to active pages, but this is hard to implement (see commit 7a608572a282a ("Revert "mm: batch activate_page() to reduce lock contention")). On the other hand, do we really need putback_lru_pages() to follow the same path? I tested several FIO/FFSB benchmark (about 20 scripts for each benchmark) in 3 machines here from 2 sockets to 4 sockets. My test doesn't show anything significant with/without below patch (there is slight difference but mostly some noise which we found even without below patch before). Below patch basically returns to the same as my first post. I tested some microbenchmarks: case-anon-cow-rand-mt 0.58% case-anon-cow-rand -3.30% case-anon-cow-seq-mt -0.51% case-anon-cow-seq -5.68% case-anon-r-rand-mt 0.23% case-anon-r-rand 0.81% case-anon-r-seq-mt -0.71% case-anon-r-seq -1.99% case-anon-rx-rand-mt 2.11% case-anon-rx-seq-mt 3.46% case-anon-w-rand-mt -0.03% case-anon-w-rand -0.50% case-anon-w-seq-mt -1.08% case-anon-w-seq -0.12% case-anon-wx-rand-mt -5.02% case-anon-wx-seq-mt -1.43% case-fork 1.65% case-fork-sleep -0.07% case-fork-withmem 1.39% case-hugetlb -0.59% case-lru-file-mmap-read-mt -0.54% case-lru-file-mmap-read 0.61% case-lru-file-mmap-read-rand -2.24% case-lru-file-readonce -0.64% case-lru-file-readtwice -11.69% case-lru-memcg -1.35% case-mmap-pread-rand-mt 1.88% case-mmap-pread-rand -15.26% case-mmap-pread-seq-mt 0.89% case-mmap-pread-seq -69.72% case-mmap-xread-rand-mt 0.71% case-mmap-xread-seq-mt 0.38% The most significent are: case-lru-file-readtwice -11.69% case-mmap-pread-rand -15.26% case-mmap-pread-seq -69.72% which use activate_page a lot. others are basically variations because each run has slightly difference. In UP case, 'size mm/swap.o' before the two patches: text data bss dec hex filename 6466 896 4 7366 1cc6 mm/swap.o after the two patches: text data bss dec hex filename 6343 896 4 7243 1c4b mm/swap.o Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:12:55 +00:00
}
static bool need_activate_page_drain(int cpu)
{
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
return pagevec_count(&per_cpu(lru_pvecs.activate_page, cpu)) != 0;
}
static void folio_activate(struct folio *folio)
mm: batch activate_page() to reduce lock contention The zone->lru_lock is heavily contented in workload where activate_page() is frequently used. We could do batch activate_page() to reduce the lock contention. The batched pages will be added into zone list when the pool is full or page reclaim is trying to drain them. For example, in a 4 socket 64 CPU system, create a sparse file and 64 processes, processes shared map to the file. Each process read access the whole file and then exit. The process exit will do unmap_vmas() and cause a lot of activate_page() call. In such workload, we saw about 58% total time reduction with below patch. Other workloads with a lot of activate_page also benefits a lot too. Andrew Morton suggested activate_page() and putback_lru_pages() should follow the same path to active pages, but this is hard to implement (see commit 7a608572a282a ("Revert "mm: batch activate_page() to reduce lock contention")). On the other hand, do we really need putback_lru_pages() to follow the same path? I tested several FIO/FFSB benchmark (about 20 scripts for each benchmark) in 3 machines here from 2 sockets to 4 sockets. My test doesn't show anything significant with/without below patch (there is slight difference but mostly some noise which we found even without below patch before). Below patch basically returns to the same as my first post. I tested some microbenchmarks: case-anon-cow-rand-mt 0.58% case-anon-cow-rand -3.30% case-anon-cow-seq-mt -0.51% case-anon-cow-seq -5.68% case-anon-r-rand-mt 0.23% case-anon-r-rand 0.81% case-anon-r-seq-mt -0.71% case-anon-r-seq -1.99% case-anon-rx-rand-mt 2.11% case-anon-rx-seq-mt 3.46% case-anon-w-rand-mt -0.03% case-anon-w-rand -0.50% case-anon-w-seq-mt -1.08% case-anon-w-seq -0.12% case-anon-wx-rand-mt -5.02% case-anon-wx-seq-mt -1.43% case-fork 1.65% case-fork-sleep -0.07% case-fork-withmem 1.39% case-hugetlb -0.59% case-lru-file-mmap-read-mt -0.54% case-lru-file-mmap-read 0.61% case-lru-file-mmap-read-rand -2.24% case-lru-file-readonce -0.64% case-lru-file-readtwice -11.69% case-lru-memcg -1.35% case-mmap-pread-rand-mt 1.88% case-mmap-pread-rand -15.26% case-mmap-pread-seq-mt 0.89% case-mmap-pread-seq -69.72% case-mmap-xread-rand-mt 0.71% case-mmap-xread-seq-mt 0.38% The most significent are: case-lru-file-readtwice -11.69% case-mmap-pread-rand -15.26% case-mmap-pread-seq -69.72% which use activate_page a lot. others are basically variations because each run has slightly difference. In UP case, 'size mm/swap.o' before the two patches: text data bss dec hex filename 6466 896 4 7366 1cc6 mm/swap.o after the two patches: text data bss dec hex filename 6343 896 4 7243 1c4b mm/swap.o Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:12:55 +00:00
{
if (folio_test_lru(folio) && !folio_test_active(folio) &&
!folio_test_unevictable(folio)) {
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
struct pagevec *pvec;
mm: batch activate_page() to reduce lock contention The zone->lru_lock is heavily contented in workload where activate_page() is frequently used. We could do batch activate_page() to reduce the lock contention. The batched pages will be added into zone list when the pool is full or page reclaim is trying to drain them. For example, in a 4 socket 64 CPU system, create a sparse file and 64 processes, processes shared map to the file. Each process read access the whole file and then exit. The process exit will do unmap_vmas() and cause a lot of activate_page() call. In such workload, we saw about 58% total time reduction with below patch. Other workloads with a lot of activate_page also benefits a lot too. Andrew Morton suggested activate_page() and putback_lru_pages() should follow the same path to active pages, but this is hard to implement (see commit 7a608572a282a ("Revert "mm: batch activate_page() to reduce lock contention")). On the other hand, do we really need putback_lru_pages() to follow the same path? I tested several FIO/FFSB benchmark (about 20 scripts for each benchmark) in 3 machines here from 2 sockets to 4 sockets. My test doesn't show anything significant with/without below patch (there is slight difference but mostly some noise which we found even without below patch before). Below patch basically returns to the same as my first post. I tested some microbenchmarks: case-anon-cow-rand-mt 0.58% case-anon-cow-rand -3.30% case-anon-cow-seq-mt -0.51% case-anon-cow-seq -5.68% case-anon-r-rand-mt 0.23% case-anon-r-rand 0.81% case-anon-r-seq-mt -0.71% case-anon-r-seq -1.99% case-anon-rx-rand-mt 2.11% case-anon-rx-seq-mt 3.46% case-anon-w-rand-mt -0.03% case-anon-w-rand -0.50% case-anon-w-seq-mt -1.08% case-anon-w-seq -0.12% case-anon-wx-rand-mt -5.02% case-anon-wx-seq-mt -1.43% case-fork 1.65% case-fork-sleep -0.07% case-fork-withmem 1.39% case-hugetlb -0.59% case-lru-file-mmap-read-mt -0.54% case-lru-file-mmap-read 0.61% case-lru-file-mmap-read-rand -2.24% case-lru-file-readonce -0.64% case-lru-file-readtwice -11.69% case-lru-memcg -1.35% case-mmap-pread-rand-mt 1.88% case-mmap-pread-rand -15.26% case-mmap-pread-seq-mt 0.89% case-mmap-pread-seq -69.72% case-mmap-xread-rand-mt 0.71% case-mmap-xread-seq-mt 0.38% The most significent are: case-lru-file-readtwice -11.69% case-mmap-pread-rand -15.26% case-mmap-pread-seq -69.72% which use activate_page a lot. others are basically variations because each run has slightly difference. In UP case, 'size mm/swap.o' before the two patches: text data bss dec hex filename 6466 896 4 7366 1cc6 mm/swap.o after the two patches: text data bss dec hex filename 6343 896 4 7243 1c4b mm/swap.o Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:12:55 +00:00
folio_get(folio);
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
local_lock(&lru_pvecs.lock);
pvec = this_cpu_ptr(&lru_pvecs.activate_page);
if (pagevec_add_and_need_flush(pvec, &folio->page))
mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn Fold the PGROTATED event collection into pagevec_move_tail_fn call back func like other funcs does in pagevec_lru_move_fn. Thus we could save func call pagevec_move_tail(). Now all usage of pagevec_lru_move_fn are same and no needs of its 3rd parameter. It's just simply the calling. No functional change. [lkp@intel.com: found a build issue in the original patch, thanks] Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:56 +00:00
pagevec_lru_move_fn(pvec, __activate_page);
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
local_unlock(&lru_pvecs.lock);
mm: batch activate_page() to reduce lock contention The zone->lru_lock is heavily contented in workload where activate_page() is frequently used. We could do batch activate_page() to reduce the lock contention. The batched pages will be added into zone list when the pool is full or page reclaim is trying to drain them. For example, in a 4 socket 64 CPU system, create a sparse file and 64 processes, processes shared map to the file. Each process read access the whole file and then exit. The process exit will do unmap_vmas() and cause a lot of activate_page() call. In such workload, we saw about 58% total time reduction with below patch. Other workloads with a lot of activate_page also benefits a lot too. Andrew Morton suggested activate_page() and putback_lru_pages() should follow the same path to active pages, but this is hard to implement (see commit 7a608572a282a ("Revert "mm: batch activate_page() to reduce lock contention")). On the other hand, do we really need putback_lru_pages() to follow the same path? I tested several FIO/FFSB benchmark (about 20 scripts for each benchmark) in 3 machines here from 2 sockets to 4 sockets. My test doesn't show anything significant with/without below patch (there is slight difference but mostly some noise which we found even without below patch before). Below patch basically returns to the same as my first post. I tested some microbenchmarks: case-anon-cow-rand-mt 0.58% case-anon-cow-rand -3.30% case-anon-cow-seq-mt -0.51% case-anon-cow-seq -5.68% case-anon-r-rand-mt 0.23% case-anon-r-rand 0.81% case-anon-r-seq-mt -0.71% case-anon-r-seq -1.99% case-anon-rx-rand-mt 2.11% case-anon-rx-seq-mt 3.46% case-anon-w-rand-mt -0.03% case-anon-w-rand -0.50% case-anon-w-seq-mt -1.08% case-anon-w-seq -0.12% case-anon-wx-rand-mt -5.02% case-anon-wx-seq-mt -1.43% case-fork 1.65% case-fork-sleep -0.07% case-fork-withmem 1.39% case-hugetlb -0.59% case-lru-file-mmap-read-mt -0.54% case-lru-file-mmap-read 0.61% case-lru-file-mmap-read-rand -2.24% case-lru-file-readonce -0.64% case-lru-file-readtwice -11.69% case-lru-memcg -1.35% case-mmap-pread-rand-mt 1.88% case-mmap-pread-rand -15.26% case-mmap-pread-seq-mt 0.89% case-mmap-pread-seq -69.72% case-mmap-xread-rand-mt 0.71% case-mmap-xread-seq-mt 0.38% The most significent are: case-lru-file-readtwice -11.69% case-mmap-pread-rand -15.26% case-mmap-pread-seq -69.72% which use activate_page a lot. others are basically variations because each run has slightly difference. In UP case, 'size mm/swap.o' before the two patches: text data bss dec hex filename 6466 896 4 7366 1cc6 mm/swap.o after the two patches: text data bss dec hex filename 6343 896 4 7243 1c4b mm/swap.o Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:12:55 +00:00
}
}
#else
static inline void activate_page_drain(int cpu)
{
}
static void folio_activate(struct folio *folio)
mm: batch activate_page() to reduce lock contention The zone->lru_lock is heavily contented in workload where activate_page() is frequently used. We could do batch activate_page() to reduce the lock contention. The batched pages will be added into zone list when the pool is full or page reclaim is trying to drain them. For example, in a 4 socket 64 CPU system, create a sparse file and 64 processes, processes shared map to the file. Each process read access the whole file and then exit. The process exit will do unmap_vmas() and cause a lot of activate_page() call. In such workload, we saw about 58% total time reduction with below patch. Other workloads with a lot of activate_page also benefits a lot too. Andrew Morton suggested activate_page() and putback_lru_pages() should follow the same path to active pages, but this is hard to implement (see commit 7a608572a282a ("Revert "mm: batch activate_page() to reduce lock contention")). On the other hand, do we really need putback_lru_pages() to follow the same path? I tested several FIO/FFSB benchmark (about 20 scripts for each benchmark) in 3 machines here from 2 sockets to 4 sockets. My test doesn't show anything significant with/without below patch (there is slight difference but mostly some noise which we found even without below patch before). Below patch basically returns to the same as my first post. I tested some microbenchmarks: case-anon-cow-rand-mt 0.58% case-anon-cow-rand -3.30% case-anon-cow-seq-mt -0.51% case-anon-cow-seq -5.68% case-anon-r-rand-mt 0.23% case-anon-r-rand 0.81% case-anon-r-seq-mt -0.71% case-anon-r-seq -1.99% case-anon-rx-rand-mt 2.11% case-anon-rx-seq-mt 3.46% case-anon-w-rand-mt -0.03% case-anon-w-rand -0.50% case-anon-w-seq-mt -1.08% case-anon-w-seq -0.12% case-anon-wx-rand-mt -5.02% case-anon-wx-seq-mt -1.43% case-fork 1.65% case-fork-sleep -0.07% case-fork-withmem 1.39% case-hugetlb -0.59% case-lru-file-mmap-read-mt -0.54% case-lru-file-mmap-read 0.61% case-lru-file-mmap-read-rand -2.24% case-lru-file-readonce -0.64% case-lru-file-readtwice -11.69% case-lru-memcg -1.35% case-mmap-pread-rand-mt 1.88% case-mmap-pread-rand -15.26% case-mmap-pread-seq-mt 0.89% case-mmap-pread-seq -69.72% case-mmap-xread-rand-mt 0.71% case-mmap-xread-seq-mt 0.38% The most significent are: case-lru-file-readtwice -11.69% case-mmap-pread-rand -15.26% case-mmap-pread-seq -69.72% which use activate_page a lot. others are basically variations because each run has slightly difference. In UP case, 'size mm/swap.o' before the two patches: text data bss dec hex filename 6466 896 4 7366 1cc6 mm/swap.o after the two patches: text data bss dec hex filename 6343 896 4 7243 1c4b mm/swap.o Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:12:55 +00:00
{
mm/lru: replace pgdat lru_lock with lruvec lock This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:29 +00:00
struct lruvec *lruvec;
mm: batch activate_page() to reduce lock contention The zone->lru_lock is heavily contented in workload where activate_page() is frequently used. We could do batch activate_page() to reduce the lock contention. The batched pages will be added into zone list when the pool is full or page reclaim is trying to drain them. For example, in a 4 socket 64 CPU system, create a sparse file and 64 processes, processes shared map to the file. Each process read access the whole file and then exit. The process exit will do unmap_vmas() and cause a lot of activate_page() call. In such workload, we saw about 58% total time reduction with below patch. Other workloads with a lot of activate_page also benefits a lot too. Andrew Morton suggested activate_page() and putback_lru_pages() should follow the same path to active pages, but this is hard to implement (see commit 7a608572a282a ("Revert "mm: batch activate_page() to reduce lock contention")). On the other hand, do we really need putback_lru_pages() to follow the same path? I tested several FIO/FFSB benchmark (about 20 scripts for each benchmark) in 3 machines here from 2 sockets to 4 sockets. My test doesn't show anything significant with/without below patch (there is slight difference but mostly some noise which we found even without below patch before). Below patch basically returns to the same as my first post. I tested some microbenchmarks: case-anon-cow-rand-mt 0.58% case-anon-cow-rand -3.30% case-anon-cow-seq-mt -0.51% case-anon-cow-seq -5.68% case-anon-r-rand-mt 0.23% case-anon-r-rand 0.81% case-anon-r-seq-mt -0.71% case-anon-r-seq -1.99% case-anon-rx-rand-mt 2.11% case-anon-rx-seq-mt 3.46% case-anon-w-rand-mt -0.03% case-anon-w-rand -0.50% case-anon-w-seq-mt -1.08% case-anon-w-seq -0.12% case-anon-wx-rand-mt -5.02% case-anon-wx-seq-mt -1.43% case-fork 1.65% case-fork-sleep -0.07% case-fork-withmem 1.39% case-hugetlb -0.59% case-lru-file-mmap-read-mt -0.54% case-lru-file-mmap-read 0.61% case-lru-file-mmap-read-rand -2.24% case-lru-file-readonce -0.64% case-lru-file-readtwice -11.69% case-lru-memcg -1.35% case-mmap-pread-rand-mt 1.88% case-mmap-pread-rand -15.26% case-mmap-pread-seq-mt 0.89% case-mmap-pread-seq -69.72% case-mmap-xread-rand-mt 0.71% case-mmap-xread-seq-mt 0.38% The most significent are: case-lru-file-readtwice -11.69% case-mmap-pread-rand -15.26% case-mmap-pread-seq -69.72% which use activate_page a lot. others are basically variations because each run has slightly difference. In UP case, 'size mm/swap.o' before the two patches: text data bss dec hex filename 6466 896 4 7366 1cc6 mm/swap.o after the two patches: text data bss dec hex filename 6343 896 4 7243 1c4b mm/swap.o Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:12:55 +00:00
if (folio_test_clear_lru(folio)) {
lruvec = folio_lruvec_lock_irq(folio);
__folio_activate(folio, lruvec);
mm/lru: replace pgdat lru_lock with lruvec lock This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:29 +00:00
unlock_page_lruvec_irq(lruvec);
folio_set_lru(folio);
mm/lru: replace pgdat lru_lock with lruvec lock This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:29 +00:00
}
}
mm: batch activate_page() to reduce lock contention The zone->lru_lock is heavily contented in workload where activate_page() is frequently used. We could do batch activate_page() to reduce the lock contention. The batched pages will be added into zone list when the pool is full or page reclaim is trying to drain them. For example, in a 4 socket 64 CPU system, create a sparse file and 64 processes, processes shared map to the file. Each process read access the whole file and then exit. The process exit will do unmap_vmas() and cause a lot of activate_page() call. In such workload, we saw about 58% total time reduction with below patch. Other workloads with a lot of activate_page also benefits a lot too. Andrew Morton suggested activate_page() and putback_lru_pages() should follow the same path to active pages, but this is hard to implement (see commit 7a608572a282a ("Revert "mm: batch activate_page() to reduce lock contention")). On the other hand, do we really need putback_lru_pages() to follow the same path? I tested several FIO/FFSB benchmark (about 20 scripts for each benchmark) in 3 machines here from 2 sockets to 4 sockets. My test doesn't show anything significant with/without below patch (there is slight difference but mostly some noise which we found even without below patch before). Below patch basically returns to the same as my first post. I tested some microbenchmarks: case-anon-cow-rand-mt 0.58% case-anon-cow-rand -3.30% case-anon-cow-seq-mt -0.51% case-anon-cow-seq -5.68% case-anon-r-rand-mt 0.23% case-anon-r-rand 0.81% case-anon-r-seq-mt -0.71% case-anon-r-seq -1.99% case-anon-rx-rand-mt 2.11% case-anon-rx-seq-mt 3.46% case-anon-w-rand-mt -0.03% case-anon-w-rand -0.50% case-anon-w-seq-mt -1.08% case-anon-w-seq -0.12% case-anon-wx-rand-mt -5.02% case-anon-wx-seq-mt -1.43% case-fork 1.65% case-fork-sleep -0.07% case-fork-withmem 1.39% case-hugetlb -0.59% case-lru-file-mmap-read-mt -0.54% case-lru-file-mmap-read 0.61% case-lru-file-mmap-read-rand -2.24% case-lru-file-readonce -0.64% case-lru-file-readtwice -11.69% case-lru-memcg -1.35% case-mmap-pread-rand-mt 1.88% case-mmap-pread-rand -15.26% case-mmap-pread-seq-mt 0.89% case-mmap-pread-seq -69.72% case-mmap-xread-rand-mt 0.71% case-mmap-xread-seq-mt 0.38% The most significent are: case-lru-file-readtwice -11.69% case-mmap-pread-rand -15.26% case-mmap-pread-seq -69.72% which use activate_page a lot. others are basically variations because each run has slightly difference. In UP case, 'size mm/swap.o' before the two patches: text data bss dec hex filename 6466 896 4 7366 1cc6 mm/swap.o after the two patches: text data bss dec hex filename 6343 896 4 7243 1c4b mm/swap.o Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:12:55 +00:00
#endif
static void __lru_cache_activate_folio(struct folio *folio)
mm: activate !PageLRU pages on mark_page_accessed if page is on local pagevec If a page is on a pagevec then it is !PageLRU and mark_page_accessed() may fail to move a page to the active list as expected. Now that the LRU is selected at LRU drain time, mark pages PageActive if they are on the local pagevec so it gets moved to the correct list at LRU drain time. Using a debugging patch it was found that for a simple git checkout based workload that pages were never added to the active file list in practice but with this patch applied they are. before after LRU Add Active File 0 750583 LRU Add Active Anon 2640587 2702818 LRU Add Inactive File 8833662 8068353 LRU Add Inactive Anon 207 200 Note that only pages on the local pagevec are considered on purpose. A !PageLRU page could be in the process of being released, reclaimed, migrated or on a remote pagevec that is currently being drained. Marking it PageActive is vunerable to races where PageLRU and Active bits are checked at the wrong time. Page reclaim will trigger VM_BUG_ONs but depending on when the race hits, it could also free a PageActive page to the page allocator and trigger a bad_page warning. Similarly a potential race exists between a per-cpu drain on a pagevec list and an activation on a remote CPU. lru_add_drain_cpu __pagevec_lru_add lru = page_lru(page); mark_page_accessed if (PageLRU(page)) activate_page else SetPageActive SetPageLRU(page); add_page_to_lru_list(page, lruvec, lru); In this case a PageActive page is added to the inactivate list and later the inactive/active stats will get skewed. While the PageActive checks in vmscan could be removed and potentially dealt with, a skew in the statistics would be very difficult to detect. Hence this patch deals just with the common case where a page being marked accessed has just been added to the local pagevec. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com> Cc: Andrew Perepechko <anserper@ya.ru> Cc: Robin Dong <sanbai@taobao.com> Cc: Theodore Tso <tytso@mit.edu> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Bernd Schubert <bernd.schubert@fastmail.fm> Cc: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:30 +00:00
{
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
struct pagevec *pvec;
mm: activate !PageLRU pages on mark_page_accessed if page is on local pagevec If a page is on a pagevec then it is !PageLRU and mark_page_accessed() may fail to move a page to the active list as expected. Now that the LRU is selected at LRU drain time, mark pages PageActive if they are on the local pagevec so it gets moved to the correct list at LRU drain time. Using a debugging patch it was found that for a simple git checkout based workload that pages were never added to the active file list in practice but with this patch applied they are. before after LRU Add Active File 0 750583 LRU Add Active Anon 2640587 2702818 LRU Add Inactive File 8833662 8068353 LRU Add Inactive Anon 207 200 Note that only pages on the local pagevec are considered on purpose. A !PageLRU page could be in the process of being released, reclaimed, migrated or on a remote pagevec that is currently being drained. Marking it PageActive is vunerable to races where PageLRU and Active bits are checked at the wrong time. Page reclaim will trigger VM_BUG_ONs but depending on when the race hits, it could also free a PageActive page to the page allocator and trigger a bad_page warning. Similarly a potential race exists between a per-cpu drain on a pagevec list and an activation on a remote CPU. lru_add_drain_cpu __pagevec_lru_add lru = page_lru(page); mark_page_accessed if (PageLRU(page)) activate_page else SetPageActive SetPageLRU(page); add_page_to_lru_list(page, lruvec, lru); In this case a PageActive page is added to the inactivate list and later the inactive/active stats will get skewed. While the PageActive checks in vmscan could be removed and potentially dealt with, a skew in the statistics would be very difficult to detect. Hence this patch deals just with the common case where a page being marked accessed has just been added to the local pagevec. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com> Cc: Andrew Perepechko <anserper@ya.ru> Cc: Robin Dong <sanbai@taobao.com> Cc: Theodore Tso <tytso@mit.edu> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Bernd Schubert <bernd.schubert@fastmail.fm> Cc: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:30 +00:00
int i;
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
local_lock(&lru_pvecs.lock);
pvec = this_cpu_ptr(&lru_pvecs.lru_add);
mm: activate !PageLRU pages on mark_page_accessed if page is on local pagevec If a page is on a pagevec then it is !PageLRU and mark_page_accessed() may fail to move a page to the active list as expected. Now that the LRU is selected at LRU drain time, mark pages PageActive if they are on the local pagevec so it gets moved to the correct list at LRU drain time. Using a debugging patch it was found that for a simple git checkout based workload that pages were never added to the active file list in practice but with this patch applied they are. before after LRU Add Active File 0 750583 LRU Add Active Anon 2640587 2702818 LRU Add Inactive File 8833662 8068353 LRU Add Inactive Anon 207 200 Note that only pages on the local pagevec are considered on purpose. A !PageLRU page could be in the process of being released, reclaimed, migrated or on a remote pagevec that is currently being drained. Marking it PageActive is vunerable to races where PageLRU and Active bits are checked at the wrong time. Page reclaim will trigger VM_BUG_ONs but depending on when the race hits, it could also free a PageActive page to the page allocator and trigger a bad_page warning. Similarly a potential race exists between a per-cpu drain on a pagevec list and an activation on a remote CPU. lru_add_drain_cpu __pagevec_lru_add lru = page_lru(page); mark_page_accessed if (PageLRU(page)) activate_page else SetPageActive SetPageLRU(page); add_page_to_lru_list(page, lruvec, lru); In this case a PageActive page is added to the inactivate list and later the inactive/active stats will get skewed. While the PageActive checks in vmscan could be removed and potentially dealt with, a skew in the statistics would be very difficult to detect. Hence this patch deals just with the common case where a page being marked accessed has just been added to the local pagevec. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com> Cc: Andrew Perepechko <anserper@ya.ru> Cc: Robin Dong <sanbai@taobao.com> Cc: Theodore Tso <tytso@mit.edu> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Bernd Schubert <bernd.schubert@fastmail.fm> Cc: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:30 +00:00
/*
* Search backwards on the optimistic assumption that the page being
* activated has just been added to this pagevec. Note that only
* the local pagevec is examined as a !PageLRU page could be in the
* process of being released, reclaimed, migrated or on a remote
* pagevec that is currently being drained. Furthermore, marking
* a remote pagevec's page PageActive potentially hits a race where
* a page is marked PageActive just after it is added to the inactive
* list causing accounting errors and BUG_ON checks to trigger.
*/
for (i = pagevec_count(pvec) - 1; i >= 0; i--) {
struct page *pagevec_page = pvec->pages[i];
if (pagevec_page == &folio->page) {
folio_set_active(folio);
mm: activate !PageLRU pages on mark_page_accessed if page is on local pagevec If a page is on a pagevec then it is !PageLRU and mark_page_accessed() may fail to move a page to the active list as expected. Now that the LRU is selected at LRU drain time, mark pages PageActive if they are on the local pagevec so it gets moved to the correct list at LRU drain time. Using a debugging patch it was found that for a simple git checkout based workload that pages were never added to the active file list in practice but with this patch applied they are. before after LRU Add Active File 0 750583 LRU Add Active Anon 2640587 2702818 LRU Add Inactive File 8833662 8068353 LRU Add Inactive Anon 207 200 Note that only pages on the local pagevec are considered on purpose. A !PageLRU page could be in the process of being released, reclaimed, migrated or on a remote pagevec that is currently being drained. Marking it PageActive is vunerable to races where PageLRU and Active bits are checked at the wrong time. Page reclaim will trigger VM_BUG_ONs but depending on when the race hits, it could also free a PageActive page to the page allocator and trigger a bad_page warning. Similarly a potential race exists between a per-cpu drain on a pagevec list and an activation on a remote CPU. lru_add_drain_cpu __pagevec_lru_add lru = page_lru(page); mark_page_accessed if (PageLRU(page)) activate_page else SetPageActive SetPageLRU(page); add_page_to_lru_list(page, lruvec, lru); In this case a PageActive page is added to the inactivate list and later the inactive/active stats will get skewed. While the PageActive checks in vmscan could be removed and potentially dealt with, a skew in the statistics would be very difficult to detect. Hence this patch deals just with the common case where a page being marked accessed has just been added to the local pagevec. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com> Cc: Andrew Perepechko <anserper@ya.ru> Cc: Robin Dong <sanbai@taobao.com> Cc: Theodore Tso <tytso@mit.edu> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Bernd Schubert <bernd.schubert@fastmail.fm> Cc: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:30 +00:00
break;
}
}
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
local_unlock(&lru_pvecs.lock);
mm: activate !PageLRU pages on mark_page_accessed if page is on local pagevec If a page is on a pagevec then it is !PageLRU and mark_page_accessed() may fail to move a page to the active list as expected. Now that the LRU is selected at LRU drain time, mark pages PageActive if they are on the local pagevec so it gets moved to the correct list at LRU drain time. Using a debugging patch it was found that for a simple git checkout based workload that pages were never added to the active file list in practice but with this patch applied they are. before after LRU Add Active File 0 750583 LRU Add Active Anon 2640587 2702818 LRU Add Inactive File 8833662 8068353 LRU Add Inactive Anon 207 200 Note that only pages on the local pagevec are considered on purpose. A !PageLRU page could be in the process of being released, reclaimed, migrated or on a remote pagevec that is currently being drained. Marking it PageActive is vunerable to races where PageLRU and Active bits are checked at the wrong time. Page reclaim will trigger VM_BUG_ONs but depending on when the race hits, it could also free a PageActive page to the page allocator and trigger a bad_page warning. Similarly a potential race exists between a per-cpu drain on a pagevec list and an activation on a remote CPU. lru_add_drain_cpu __pagevec_lru_add lru = page_lru(page); mark_page_accessed if (PageLRU(page)) activate_page else SetPageActive SetPageLRU(page); add_page_to_lru_list(page, lruvec, lru); In this case a PageActive page is added to the inactivate list and later the inactive/active stats will get skewed. While the PageActive checks in vmscan could be removed and potentially dealt with, a skew in the statistics would be very difficult to detect. Hence this patch deals just with the common case where a page being marked accessed has just been added to the local pagevec. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com> Cc: Andrew Perepechko <anserper@ya.ru> Cc: Robin Dong <sanbai@taobao.com> Cc: Theodore Tso <tytso@mit.edu> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Bernd Schubert <bernd.schubert@fastmail.fm> Cc: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:30 +00:00
}
/*
* Mark a page as having seen activity.
*
* inactive,unreferenced -> inactive,referenced
* inactive,referenced -> active,unreferenced
* active,unreferenced -> active,referenced
*
* When a newly allocated page is not yet visible, so safe for non-atomic ops,
* __SetPageReferenced(page) may be substituted for mark_page_accessed(page).
*/
void folio_mark_accessed(struct folio *folio)
{
if (!folio_test_referenced(folio)) {
folio_set_referenced(folio);
} else if (folio_test_unevictable(folio)) {
/*
* Unevictable pages are on the "LRU_UNEVICTABLE" list. But,
* this list is never rotated or maintained, so marking an
* unevictable page accessed has no effect.
*/
} else if (!folio_test_active(folio)) {
mm: activate !PageLRU pages on mark_page_accessed if page is on local pagevec If a page is on a pagevec then it is !PageLRU and mark_page_accessed() may fail to move a page to the active list as expected. Now that the LRU is selected at LRU drain time, mark pages PageActive if they are on the local pagevec so it gets moved to the correct list at LRU drain time. Using a debugging patch it was found that for a simple git checkout based workload that pages were never added to the active file list in practice but with this patch applied they are. before after LRU Add Active File 0 750583 LRU Add Active Anon 2640587 2702818 LRU Add Inactive File 8833662 8068353 LRU Add Inactive Anon 207 200 Note that only pages on the local pagevec are considered on purpose. A !PageLRU page could be in the process of being released, reclaimed, migrated or on a remote pagevec that is currently being drained. Marking it PageActive is vunerable to races where PageLRU and Active bits are checked at the wrong time. Page reclaim will trigger VM_BUG_ONs but depending on when the race hits, it could also free a PageActive page to the page allocator and trigger a bad_page warning. Similarly a potential race exists between a per-cpu drain on a pagevec list and an activation on a remote CPU. lru_add_drain_cpu __pagevec_lru_add lru = page_lru(page); mark_page_accessed if (PageLRU(page)) activate_page else SetPageActive SetPageLRU(page); add_page_to_lru_list(page, lruvec, lru); In this case a PageActive page is added to the inactivate list and later the inactive/active stats will get skewed. While the PageActive checks in vmscan could be removed and potentially dealt with, a skew in the statistics would be very difficult to detect. Hence this patch deals just with the common case where a page being marked accessed has just been added to the local pagevec. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com> Cc: Andrew Perepechko <anserper@ya.ru> Cc: Robin Dong <sanbai@taobao.com> Cc: Theodore Tso <tytso@mit.edu> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Bernd Schubert <bernd.schubert@fastmail.fm> Cc: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:30 +00:00
/*
* If the page is on the LRU, queue it for activation via
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
* lru_pvecs.activate_page. Otherwise, assume the page is on a
mm: activate !PageLRU pages on mark_page_accessed if page is on local pagevec If a page is on a pagevec then it is !PageLRU and mark_page_accessed() may fail to move a page to the active list as expected. Now that the LRU is selected at LRU drain time, mark pages PageActive if they are on the local pagevec so it gets moved to the correct list at LRU drain time. Using a debugging patch it was found that for a simple git checkout based workload that pages were never added to the active file list in practice but with this patch applied they are. before after LRU Add Active File 0 750583 LRU Add Active Anon 2640587 2702818 LRU Add Inactive File 8833662 8068353 LRU Add Inactive Anon 207 200 Note that only pages on the local pagevec are considered on purpose. A !PageLRU page could be in the process of being released, reclaimed, migrated or on a remote pagevec that is currently being drained. Marking it PageActive is vunerable to races where PageLRU and Active bits are checked at the wrong time. Page reclaim will trigger VM_BUG_ONs but depending on when the race hits, it could also free a PageActive page to the page allocator and trigger a bad_page warning. Similarly a potential race exists between a per-cpu drain on a pagevec list and an activation on a remote CPU. lru_add_drain_cpu __pagevec_lru_add lru = page_lru(page); mark_page_accessed if (PageLRU(page)) activate_page else SetPageActive SetPageLRU(page); add_page_to_lru_list(page, lruvec, lru); In this case a PageActive page is added to the inactivate list and later the inactive/active stats will get skewed. While the PageActive checks in vmscan could be removed and potentially dealt with, a skew in the statistics would be very difficult to detect. Hence this patch deals just with the common case where a page being marked accessed has just been added to the local pagevec. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com> Cc: Andrew Perepechko <anserper@ya.ru> Cc: Robin Dong <sanbai@taobao.com> Cc: Theodore Tso <tytso@mit.edu> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Bernd Schubert <bernd.schubert@fastmail.fm> Cc: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:30 +00:00
* pagevec, mark it active and it'll be moved to the active
* LRU on the next drain.
*/
if (folio_test_lru(folio))
folio_activate(folio);
mm: activate !PageLRU pages on mark_page_accessed if page is on local pagevec If a page is on a pagevec then it is !PageLRU and mark_page_accessed() may fail to move a page to the active list as expected. Now that the LRU is selected at LRU drain time, mark pages PageActive if they are on the local pagevec so it gets moved to the correct list at LRU drain time. Using a debugging patch it was found that for a simple git checkout based workload that pages were never added to the active file list in practice but with this patch applied they are. before after LRU Add Active File 0 750583 LRU Add Active Anon 2640587 2702818 LRU Add Inactive File 8833662 8068353 LRU Add Inactive Anon 207 200 Note that only pages on the local pagevec are considered on purpose. A !PageLRU page could be in the process of being released, reclaimed, migrated or on a remote pagevec that is currently being drained. Marking it PageActive is vunerable to races where PageLRU and Active bits are checked at the wrong time. Page reclaim will trigger VM_BUG_ONs but depending on when the race hits, it could also free a PageActive page to the page allocator and trigger a bad_page warning. Similarly a potential race exists between a per-cpu drain on a pagevec list and an activation on a remote CPU. lru_add_drain_cpu __pagevec_lru_add lru = page_lru(page); mark_page_accessed if (PageLRU(page)) activate_page else SetPageActive SetPageLRU(page); add_page_to_lru_list(page, lruvec, lru); In this case a PageActive page is added to the inactivate list and later the inactive/active stats will get skewed. While the PageActive checks in vmscan could be removed and potentially dealt with, a skew in the statistics would be very difficult to detect. Hence this patch deals just with the common case where a page being marked accessed has just been added to the local pagevec. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Jan Kara <jack@suse.cz> Cc: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com> Cc: Andrew Perepechko <anserper@ya.ru> Cc: Robin Dong <sanbai@taobao.com> Cc: Theodore Tso <tytso@mit.edu> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Bernd Schubert <bernd.schubert@fastmail.fm> Cc: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:30 +00:00
else
__lru_cache_activate_folio(folio);
folio_clear_referenced(folio);
workingset_activation(folio);
}
if (folio_test_idle(folio))
folio_clear_idle(folio);
}
EXPORT_SYMBOL(folio_mark_accessed);
/**
* folio_add_lru - Add a folio to an LRU list.
* @folio: The folio to be added to the LRU.
*
* Queue the folio for addition to the LRU. The decision on whether
* to add the page to the [in]active [file|anon] list is deferred until the
* pagevec is drained. This gives a chance for the caller of folio_add_lru()
* have the folio added to the active list using folio_mark_accessed().
*/
void folio_add_lru(struct folio *folio)
{
struct pagevec *pvec;
VM_BUG_ON_FOLIO(folio_test_active(folio) && folio_test_unevictable(folio), folio);
VM_BUG_ON_FOLIO(folio_test_lru(folio), folio);
folio_get(folio);
local_lock(&lru_pvecs.lock);
pvec = this_cpu_ptr(&lru_pvecs.lru_add);
if (pagevec_add_and_need_flush(pvec, &folio->page))
__pagevec_lru_add(pvec);
local_unlock(&lru_pvecs.lock);
}
EXPORT_SYMBOL(folio_add_lru);
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 21:19:20 +00:00
/**
mm/vmscan: protect the workingset on anonymous LRU In current implementation, newly created or swap-in anonymous page is started on active list. Growing active list results in rebalancing active/inactive list so old pages on active list are demoted to inactive list. Hence, the page on active list isn't protected at all. Following is an example of this situation. Assume that 50 hot pages on active list. Numbers denote the number of pages on active/inactive list (active | inactive). 1. 50 hot pages on active list 50(h) | 0 2. workload: 50 newly created (used-once) pages 50(uo) | 50(h) 3. workload: another 50 newly created (used-once) pages 50(uo) | 50(uo), swap-out 50(h) This patch tries to fix this issue. Like as file LRU, newly created or swap-in anonymous pages will be inserted to the inactive list. They are promoted to active list if enough reference happens. This simple modification changes the above example as following. 1. 50 hot pages on active list 50(h) | 0 2. workload: 50 newly created (used-once) pages 50(h) | 50(uo) 3. workload: another 50 newly created (used-once) pages 50(h) | 50(uo), swap-out 50(uo) As you can see, hot pages on active list would be protected. Note that, this implementation has a drawback that the page cannot be promoted and will be swapped-out if re-access interval is greater than the size of inactive list but less than the size of total(active+inactive). To solve this potential issue, following patch will apply workingset detection similar to the one that's already applied to file LRU. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Link: http://lkml.kernel.org/r/1595490560-15117-3-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:30:40 +00:00
* lru_cache_add_inactive_or_unevictable
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 21:19:20 +00:00
* @page: the page to be added to LRU
* @vma: vma in which page is mapped for determining reclaimability
*
mm/vmscan: protect the workingset on anonymous LRU In current implementation, newly created or swap-in anonymous page is started on active list. Growing active list results in rebalancing active/inactive list so old pages on active list are demoted to inactive list. Hence, the page on active list isn't protected at all. Following is an example of this situation. Assume that 50 hot pages on active list. Numbers denote the number of pages on active/inactive list (active | inactive). 1. 50 hot pages on active list 50(h) | 0 2. workload: 50 newly created (used-once) pages 50(uo) | 50(h) 3. workload: another 50 newly created (used-once) pages 50(uo) | 50(uo), swap-out 50(h) This patch tries to fix this issue. Like as file LRU, newly created or swap-in anonymous pages will be inserted to the inactive list. They are promoted to active list if enough reference happens. This simple modification changes the above example as following. 1. 50 hot pages on active list 50(h) | 0 2. workload: 50 newly created (used-once) pages 50(h) | 50(uo) 3. workload: another 50 newly created (used-once) pages 50(h) | 50(uo), swap-out 50(uo) As you can see, hot pages on active list would be protected. Note that, this implementation has a drawback that the page cannot be promoted and will be swapped-out if re-access interval is greater than the size of inactive list but less than the size of total(active+inactive). To solve this potential issue, following patch will apply workingset detection similar to the one that's already applied to file LRU. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Link: http://lkml.kernel.org/r/1595490560-15117-3-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:30:40 +00:00
* Place @page on the inactive or unevictable LRU list, depending on its
* evictability.
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 21:19:20 +00:00
*/
mm/vmscan: protect the workingset on anonymous LRU In current implementation, newly created or swap-in anonymous page is started on active list. Growing active list results in rebalancing active/inactive list so old pages on active list are demoted to inactive list. Hence, the page on active list isn't protected at all. Following is an example of this situation. Assume that 50 hot pages on active list. Numbers denote the number of pages on active/inactive list (active | inactive). 1. 50 hot pages on active list 50(h) | 0 2. workload: 50 newly created (used-once) pages 50(uo) | 50(h) 3. workload: another 50 newly created (used-once) pages 50(uo) | 50(uo), swap-out 50(h) This patch tries to fix this issue. Like as file LRU, newly created or swap-in anonymous pages will be inserted to the inactive list. They are promoted to active list if enough reference happens. This simple modification changes the above example as following. 1. 50 hot pages on active list 50(h) | 0 2. workload: 50 newly created (used-once) pages 50(h) | 50(uo) 3. workload: another 50 newly created (used-once) pages 50(h) | 50(uo), swap-out 50(uo) As you can see, hot pages on active list would be protected. Note that, this implementation has a drawback that the page cannot be promoted and will be swapped-out if re-access interval is greater than the size of inactive list but less than the size of total(active+inactive). To solve this potential issue, following patch will apply workingset detection similar to the one that's already applied to file LRU. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Link: http://lkml.kernel.org/r/1595490560-15117-3-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:30:40 +00:00
void lru_cache_add_inactive_or_unevictable(struct page *page,
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 21:19:20 +00:00
struct vm_area_struct *vma)
{
VM_BUG_ON_PAGE(PageLRU(page), page);
mm/munlock: mlock_page() munlock_page() batch by pagevec A weakness of the page->mlock_count approach is the need for lruvec lock while holding page table lock. That is not an overhead we would allow on normal pages, but I think acceptable just for pages in an mlocked area. But let's try to amortize the extra cost by gathering on per-cpu pagevec before acquiring the lruvec lock. I have an unverified conjecture that the mlock pagevec might work out well for delaying the mlock processing of new file pages until they have got off lru_cache_add()'s pagevec and on to LRU. The initialization of page->mlock_count is subject to races and awkward: 0 or !!PageMlocked or 1? Was it wrong even in the implementation before this commit, which just widens the window? I haven't gone back to think it through. Maybe someone can point out a better way to initialize it. Bringing lru_cache_add_inactive_or_unevictable()'s mlock initialization into mm/mlock.c has helped: mlock_new_page(), using the mlock pagevec, rather than lru_cache_add()'s pagevec. Experimented with various orderings: the right thing seems to be for mlock_page() and mlock_new_page() to TestSetPageMlocked before adding to pagevec, but munlock_page() to leave TestClearPageMlocked to the later pagevec processing. Dropped the VM_BUG_ON_PAGE(PageTail)s this time around: they have made their point, and the thp_nr_page()s already contain a VM_BUG_ON_PGFLAGS() for that. This still leaves acquiring lruvec locks under page table lock each time the pagevec fills (or a THP is added): which I suppose is rather silly, since they sit on pagevec waiting to be processed long after page table lock has been dropped; but I'm disinclined to uglify the calling sequence until some load shows an actual problem with it (nothing wrong with taking lruvec lock under page table lock, just "nicer" to do it less). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:37:29 +00:00
if (unlikely((vma->vm_flags & (VM_LOCKED | VM_SPECIAL)) == VM_LOCKED))
mlock_new_page(page);
else
lru_cache_add(page);
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 21:19:20 +00:00
}
mm: deactivate invalidated pages Recently, there are reported problem about thrashing. (http://marc.info/?l=rsync&m=128885034930933&w=2) It happens by backup workloads(ex, nightly rsync). That's because the workload makes just use-once pages and touches pages twice. It promotes the page into active list so that it results in working set page eviction. Some app developer want to support POSIX_FADV_NOREUSE. But other OSes don't support it, either. (http://marc.info/?l=linux-mm&m=128928979512086&w=2) By other approach, app developers use POSIX_FADV_DONTNEED. But it has a problem. If kernel meets page is writing during invalidate_mapping_pages, it can't work. It makes for application programmer to use it since they always have to sync data before calling fadivse(..POSIX_FADV_DONTNEED) to make sure the pages could be discardable. At last, they can't use deferred write of kernel so that they could see performance loss. (http://insights.oetiker.ch/linux/fadvise.html) In fact, invalidation is very big hint to reclaimer. It means we don't use the page any more. So let's move the writing page into inactive list's head if we can't truncate it right now. Why I move page to head of lru on this patch, Dirty/Writeback page would be flushed sooner or later. It can prevent writeout of pageout which is less effective than flusher's writeout. Originally, I reused lru_demote of Peter with some change so added his Signed-off-by. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:52 +00:00
/*
* If the page can not be invalidated, it is moved to the
* inactive list to speed up its reclaim. It is moved to the
* head of the list, rather than the tail, to give the flusher
* threads some time to write it out, as this is much more
* effective than the single-page writeout from reclaim.
mm: reclaim invalidated page ASAP invalidate_mapping_pages is very big hint to reclaimer. It means user doesn't want to use the page any more. So in order to prevent working set page eviction, this patch move the page into tail of inactive list by PG_reclaim. Please, remember that pages in inactive list are working set as well as active list. If we don't move pages into inactive list's tail, pages near by tail of inactive list can be evicted although we have a big clue about useless pages. It's totally bad. Now PG_readahead/PG_reclaim is shared. fe3cba17 added ClearPageReclaim into clear_page_dirty_for_io for preventing fast reclaiming readahead marker page. In this series, PG_reclaim is used by invalidated page, too. If VM find the page is invalidated and it's dirty, it sets PG_reclaim to reclaim asap. Then, when the dirty page will be writeback, clear_page_dirty_for_io will clear PG_reclaim unconditionally. It disturbs this serie's goal. I think it's okay to clear PG_readahead when the page is dirty, not writeback time. So this patch moves ClearPageReadahead. In v4, ClearPageReadahead in set_page_dirty has a problem which is reported by Steven Barrett. It's due to compound page. Some driver(ex, audio) calls set_page_dirty with compound page which isn't on LRU. but my patch does ClearPageRelcaim on compound page. In non-CONFIG_PAGEFLAGS_EXTENDED, it breaks PageTail flag. I think it doesn't affect THP and pass my test with THP enabling but Cced Andrea for double check. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Steven Barrett <damentz@liquorix.net> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:54 +00:00
*
* If the page isn't page_mapped and dirty/writeback, the page
* could reclaim asap using PG_reclaim.
*
* 1. active, mapped page -> none
* 2. active, dirty/writeback page -> inactive, head, PG_reclaim
* 3. inactive, mapped page -> none
* 4. inactive, dirty/writeback page -> inactive, head, PG_reclaim
* 5. inactive, clean -> inactive, tail
* 6. Others -> none
*
* In 4, why it moves inactive's head, the VM expects the page would
* be write it out by flusher threads as this is much more effective
* than the single-page writeout from reclaim.
mm: deactivate invalidated pages Recently, there are reported problem about thrashing. (http://marc.info/?l=rsync&m=128885034930933&w=2) It happens by backup workloads(ex, nightly rsync). That's because the workload makes just use-once pages and touches pages twice. It promotes the page into active list so that it results in working set page eviction. Some app developer want to support POSIX_FADV_NOREUSE. But other OSes don't support it, either. (http://marc.info/?l=linux-mm&m=128928979512086&w=2) By other approach, app developers use POSIX_FADV_DONTNEED. But it has a problem. If kernel meets page is writing during invalidate_mapping_pages, it can't work. It makes for application programmer to use it since they always have to sync data before calling fadivse(..POSIX_FADV_DONTNEED) to make sure the pages could be discardable. At last, they can't use deferred write of kernel so that they could see performance loss. (http://insights.oetiker.ch/linux/fadvise.html) In fact, invalidation is very big hint to reclaimer. It means we don't use the page any more. So let's move the writing page into inactive list's head if we can't truncate it right now. Why I move page to head of lru on this patch, Dirty/Writeback page would be flushed sooner or later. It can prevent writeout of pageout which is less effective than flusher's writeout. Originally, I reused lru_demote of Peter with some change so added his Signed-off-by. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:52 +00:00
*/
mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn Fold the PGROTATED event collection into pagevec_move_tail_fn call back func like other funcs does in pagevec_lru_move_fn. Thus we could save func call pagevec_move_tail(). Now all usage of pagevec_lru_move_fn are same and no needs of its 3rd parameter. It's just simply the calling. No functional change. [lkp@intel.com: found a build issue in the original patch, thanks] Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:56 +00:00
static void lru_deactivate_file_fn(struct page *page, struct lruvec *lruvec)
mm: deactivate invalidated pages Recently, there are reported problem about thrashing. (http://marc.info/?l=rsync&m=128885034930933&w=2) It happens by backup workloads(ex, nightly rsync). That's because the workload makes just use-once pages and touches pages twice. It promotes the page into active list so that it results in working set page eviction. Some app developer want to support POSIX_FADV_NOREUSE. But other OSes don't support it, either. (http://marc.info/?l=linux-mm&m=128928979512086&w=2) By other approach, app developers use POSIX_FADV_DONTNEED. But it has a problem. If kernel meets page is writing during invalidate_mapping_pages, it can't work. It makes for application programmer to use it since they always have to sync data before calling fadivse(..POSIX_FADV_DONTNEED) to make sure the pages could be discardable. At last, they can't use deferred write of kernel so that they could see performance loss. (http://insights.oetiker.ch/linux/fadvise.html) In fact, invalidation is very big hint to reclaimer. It means we don't use the page any more. So let's move the writing page into inactive list's head if we can't truncate it right now. Why I move page to head of lru on this patch, Dirty/Writeback page would be flushed sooner or later. It can prevent writeout of pageout which is less effective than flusher's writeout. Originally, I reused lru_demote of Peter with some change so added his Signed-off-by. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:52 +00:00
{
bool active = PageActive(page);
int nr_pages = thp_nr_pages(page);
mm: deactivate invalidated pages Recently, there are reported problem about thrashing. (http://marc.info/?l=rsync&m=128885034930933&w=2) It happens by backup workloads(ex, nightly rsync). That's because the workload makes just use-once pages and touches pages twice. It promotes the page into active list so that it results in working set page eviction. Some app developer want to support POSIX_FADV_NOREUSE. But other OSes don't support it, either. (http://marc.info/?l=linux-mm&m=128928979512086&w=2) By other approach, app developers use POSIX_FADV_DONTNEED. But it has a problem. If kernel meets page is writing during invalidate_mapping_pages, it can't work. It makes for application programmer to use it since they always have to sync data before calling fadivse(..POSIX_FADV_DONTNEED) to make sure the pages could be discardable. At last, they can't use deferred write of kernel so that they could see performance loss. (http://insights.oetiker.ch/linux/fadvise.html) In fact, invalidation is very big hint to reclaimer. It means we don't use the page any more. So let's move the writing page into inactive list's head if we can't truncate it right now. Why I move page to head of lru on this patch, Dirty/Writeback page would be flushed sooner or later. It can prevent writeout of pageout which is less effective than flusher's writeout. Originally, I reused lru_demote of Peter with some change so added his Signed-off-by. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:52 +00:00
if (PageUnevictable(page))
return;
mm: deactivate invalidated pages Recently, there are reported problem about thrashing. (http://marc.info/?l=rsync&m=128885034930933&w=2) It happens by backup workloads(ex, nightly rsync). That's because the workload makes just use-once pages and touches pages twice. It promotes the page into active list so that it results in working set page eviction. Some app developer want to support POSIX_FADV_NOREUSE. But other OSes don't support it, either. (http://marc.info/?l=linux-mm&m=128928979512086&w=2) By other approach, app developers use POSIX_FADV_DONTNEED. But it has a problem. If kernel meets page is writing during invalidate_mapping_pages, it can't work. It makes for application programmer to use it since they always have to sync data before calling fadivse(..POSIX_FADV_DONTNEED) to make sure the pages could be discardable. At last, they can't use deferred write of kernel so that they could see performance loss. (http://insights.oetiker.ch/linux/fadvise.html) In fact, invalidation is very big hint to reclaimer. It means we don't use the page any more. So let's move the writing page into inactive list's head if we can't truncate it right now. Why I move page to head of lru on this patch, Dirty/Writeback page would be flushed sooner or later. It can prevent writeout of pageout which is less effective than flusher's writeout. Originally, I reused lru_demote of Peter with some change so added his Signed-off-by. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:52 +00:00
/* Some processes are using the page */
if (page_mapped(page))
return;
del_page_from_lru_list(page, lruvec);
mm: deactivate invalidated pages Recently, there are reported problem about thrashing. (http://marc.info/?l=rsync&m=128885034930933&w=2) It happens by backup workloads(ex, nightly rsync). That's because the workload makes just use-once pages and touches pages twice. It promotes the page into active list so that it results in working set page eviction. Some app developer want to support POSIX_FADV_NOREUSE. But other OSes don't support it, either. (http://marc.info/?l=linux-mm&m=128928979512086&w=2) By other approach, app developers use POSIX_FADV_DONTNEED. But it has a problem. If kernel meets page is writing during invalidate_mapping_pages, it can't work. It makes for application programmer to use it since they always have to sync data before calling fadivse(..POSIX_FADV_DONTNEED) to make sure the pages could be discardable. At last, they can't use deferred write of kernel so that they could see performance loss. (http://insights.oetiker.ch/linux/fadvise.html) In fact, invalidation is very big hint to reclaimer. It means we don't use the page any more. So let's move the writing page into inactive list's head if we can't truncate it right now. Why I move page to head of lru on this patch, Dirty/Writeback page would be flushed sooner or later. It can prevent writeout of pageout which is less effective than flusher's writeout. Originally, I reused lru_demote of Peter with some change so added his Signed-off-by. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:52 +00:00
ClearPageActive(page);
ClearPageReferenced(page);
mm: reclaim invalidated page ASAP invalidate_mapping_pages is very big hint to reclaimer. It means user doesn't want to use the page any more. So in order to prevent working set page eviction, this patch move the page into tail of inactive list by PG_reclaim. Please, remember that pages in inactive list are working set as well as active list. If we don't move pages into inactive list's tail, pages near by tail of inactive list can be evicted although we have a big clue about useless pages. It's totally bad. Now PG_readahead/PG_reclaim is shared. fe3cba17 added ClearPageReclaim into clear_page_dirty_for_io for preventing fast reclaiming readahead marker page. In this series, PG_reclaim is used by invalidated page, too. If VM find the page is invalidated and it's dirty, it sets PG_reclaim to reclaim asap. Then, when the dirty page will be writeback, clear_page_dirty_for_io will clear PG_reclaim unconditionally. It disturbs this serie's goal. I think it's okay to clear PG_readahead when the page is dirty, not writeback time. So this patch moves ClearPageReadahead. In v4, ClearPageReadahead in set_page_dirty has a problem which is reported by Steven Barrett. It's due to compound page. Some driver(ex, audio) calls set_page_dirty with compound page which isn't on LRU. but my patch does ClearPageRelcaim on compound page. In non-CONFIG_PAGEFLAGS_EXTENDED, it breaks PageTail flag. I think it doesn't affect THP and pass my test with THP enabling but Cced Andrea for double check. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Steven Barrett <damentz@liquorix.net> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:54 +00:00
if (PageWriteback(page) || PageDirty(page)) {
/*
* PG_reclaim could be raced with end_page_writeback
* It can make readahead confusing. But race window
* is _really_ small and it's non-critical problem.
*/
add_page_to_lru_list(page, lruvec);
mm: reclaim invalidated page ASAP invalidate_mapping_pages is very big hint to reclaimer. It means user doesn't want to use the page any more. So in order to prevent working set page eviction, this patch move the page into tail of inactive list by PG_reclaim. Please, remember that pages in inactive list are working set as well as active list. If we don't move pages into inactive list's tail, pages near by tail of inactive list can be evicted although we have a big clue about useless pages. It's totally bad. Now PG_readahead/PG_reclaim is shared. fe3cba17 added ClearPageReclaim into clear_page_dirty_for_io for preventing fast reclaiming readahead marker page. In this series, PG_reclaim is used by invalidated page, too. If VM find the page is invalidated and it's dirty, it sets PG_reclaim to reclaim asap. Then, when the dirty page will be writeback, clear_page_dirty_for_io will clear PG_reclaim unconditionally. It disturbs this serie's goal. I think it's okay to clear PG_readahead when the page is dirty, not writeback time. So this patch moves ClearPageReadahead. In v4, ClearPageReadahead in set_page_dirty has a problem which is reported by Steven Barrett. It's due to compound page. Some driver(ex, audio) calls set_page_dirty with compound page which isn't on LRU. but my patch does ClearPageRelcaim on compound page. In non-CONFIG_PAGEFLAGS_EXTENDED, it breaks PageTail flag. I think it doesn't affect THP and pass my test with THP enabling but Cced Andrea for double check. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Steven Barrett <damentz@liquorix.net> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:54 +00:00
SetPageReclaim(page);
} else {
/*
* The page's writeback ends up during pagevec
* We move that page into tail of inactive.
mm: reclaim invalidated page ASAP invalidate_mapping_pages is very big hint to reclaimer. It means user doesn't want to use the page any more. So in order to prevent working set page eviction, this patch move the page into tail of inactive list by PG_reclaim. Please, remember that pages in inactive list are working set as well as active list. If we don't move pages into inactive list's tail, pages near by tail of inactive list can be evicted although we have a big clue about useless pages. It's totally bad. Now PG_readahead/PG_reclaim is shared. fe3cba17 added ClearPageReclaim into clear_page_dirty_for_io for preventing fast reclaiming readahead marker page. In this series, PG_reclaim is used by invalidated page, too. If VM find the page is invalidated and it's dirty, it sets PG_reclaim to reclaim asap. Then, when the dirty page will be writeback, clear_page_dirty_for_io will clear PG_reclaim unconditionally. It disturbs this serie's goal. I think it's okay to clear PG_readahead when the page is dirty, not writeback time. So this patch moves ClearPageReadahead. In v4, ClearPageReadahead in set_page_dirty has a problem which is reported by Steven Barrett. It's due to compound page. Some driver(ex, audio) calls set_page_dirty with compound page which isn't on LRU. but my patch does ClearPageRelcaim on compound page. In non-CONFIG_PAGEFLAGS_EXTENDED, it breaks PageTail flag. I think it doesn't affect THP and pass my test with THP enabling but Cced Andrea for double check. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Steven Barrett <damentz@liquorix.net> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:54 +00:00
*/
add_page_to_lru_list_tail(page, lruvec);
__count_vm_events(PGROTATED, nr_pages);
mm: reclaim invalidated page ASAP invalidate_mapping_pages is very big hint to reclaimer. It means user doesn't want to use the page any more. So in order to prevent working set page eviction, this patch move the page into tail of inactive list by PG_reclaim. Please, remember that pages in inactive list are working set as well as active list. If we don't move pages into inactive list's tail, pages near by tail of inactive list can be evicted although we have a big clue about useless pages. It's totally bad. Now PG_readahead/PG_reclaim is shared. fe3cba17 added ClearPageReclaim into clear_page_dirty_for_io for preventing fast reclaiming readahead marker page. In this series, PG_reclaim is used by invalidated page, too. If VM find the page is invalidated and it's dirty, it sets PG_reclaim to reclaim asap. Then, when the dirty page will be writeback, clear_page_dirty_for_io will clear PG_reclaim unconditionally. It disturbs this serie's goal. I think it's okay to clear PG_readahead when the page is dirty, not writeback time. So this patch moves ClearPageReadahead. In v4, ClearPageReadahead in set_page_dirty has a problem which is reported by Steven Barrett. It's due to compound page. Some driver(ex, audio) calls set_page_dirty with compound page which isn't on LRU. but my patch does ClearPageRelcaim on compound page. In non-CONFIG_PAGEFLAGS_EXTENDED, it breaks PageTail flag. I think it doesn't affect THP and pass my test with THP enabling but Cced Andrea for double check. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Steven Barrett <damentz@liquorix.net> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:54 +00:00
}
if (active) {
__count_vm_events(PGDEACTIVATE, nr_pages);
__count_memcg_events(lruvec_memcg(lruvec), PGDEACTIVATE,
nr_pages);
}
mm: deactivate invalidated pages Recently, there are reported problem about thrashing. (http://marc.info/?l=rsync&m=128885034930933&w=2) It happens by backup workloads(ex, nightly rsync). That's because the workload makes just use-once pages and touches pages twice. It promotes the page into active list so that it results in working set page eviction. Some app developer want to support POSIX_FADV_NOREUSE. But other OSes don't support it, either. (http://marc.info/?l=linux-mm&m=128928979512086&w=2) By other approach, app developers use POSIX_FADV_DONTNEED. But it has a problem. If kernel meets page is writing during invalidate_mapping_pages, it can't work. It makes for application programmer to use it since they always have to sync data before calling fadivse(..POSIX_FADV_DONTNEED) to make sure the pages could be discardable. At last, they can't use deferred write of kernel so that they could see performance loss. (http://insights.oetiker.ch/linux/fadvise.html) In fact, invalidation is very big hint to reclaimer. It means we don't use the page any more. So let's move the writing page into inactive list's head if we can't truncate it right now. Why I move page to head of lru on this patch, Dirty/Writeback page would be flushed sooner or later. It can prevent writeout of pageout which is less effective than flusher's writeout. Originally, I reused lru_demote of Peter with some change so added his Signed-off-by. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:52 +00:00
}
mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn Fold the PGROTATED event collection into pagevec_move_tail_fn call back func like other funcs does in pagevec_lru_move_fn. Thus we could save func call pagevec_move_tail(). Now all usage of pagevec_lru_move_fn are same and no needs of its 3rd parameter. It's just simply the calling. No functional change. [lkp@intel.com: found a build issue in the original patch, thanks] Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:56 +00:00
static void lru_deactivate_fn(struct page *page, struct lruvec *lruvec)
mm: introduce MADV_COLD Patch series "Introduce MADV_COLD and MADV_PAGEOUT", v7. - Background The Android terminology used for forking a new process and starting an app from scratch is a cold start, while resuming an existing app is a hot start. While we continually try to improve the performance of cold starts, hot starts will always be significantly less power hungry as well as faster so we are trying to make hot start more likely than cold start. To increase hot start, Android userspace manages the order that apps should be killed in a process called ActivityManagerService. ActivityManagerService tracks every Android app or service that the user could be interacting with at any time and translates that into a ranked list for lmkd(low memory killer daemon). They are likely to be killed by lmkd if the system has to reclaim memory. In that sense they are similar to entries in any other cache. Those apps are kept alive for opportunistic performance improvements but those performance improvements will vary based on the memory requirements of individual workloads. - Problem Naturally, cached apps were dominant consumers of memory on the system. However, they were not significant consumers of swap even though they are good candidate for swap. Under investigation, swapping out only begins once the low zone watermark is hit and kswapd wakes up, but the overall allocation rate in the system might trip lmkd thresholds and cause a cached process to be killed(we measured performance swapping out vs. zapping the memory by killing a process. Unsurprisingly, zapping is 10x times faster even though we use zram which is much faster than real storage) so kill from lmkd will often satisfy the high zone watermark, resulting in very few pages actually being moved to swap. - Approach The approach we chose was to use a new interface to allow userspace to proactively reclaim entire processes by leveraging platform information. This allowed us to bypass the inaccuracy of the kernel’s LRUs for pages that are known to be cold from userspace and to avoid races with lmkd by reclaiming apps as soon as they entered the cached state. Additionally, it could provide many chances for platform to use much information to optimize memory efficiency. To achieve the goal, the patchset introduce two new options for madvise. One is MADV_COLD which will deactivate activated pages and the other is MADV_PAGEOUT which will reclaim private pages instantly. These new options complement MADV_DONTNEED and MADV_FREE by adding non-destructive ways to gain some free memory space. MADV_PAGEOUT is similar to MADV_DONTNEED in a way that it hints the kernel that memory region is not currently needed and should be reclaimed immediately; MADV_COLD is similar to MADV_FREE in a way that it hints the kernel that memory region is not currently needed and should be reclaimed when memory pressure rises. This patch (of 5): When a process expects no accesses to a certain memory range, it could give a hint to kernel that the pages can be reclaimed when memory pressure happens but data should be preserved for future use. This could reduce workingset eviction so it ends up increasing performance. This patch introduces the new MADV_COLD hint to madvise(2) syscall. MADV_COLD can be used by a process to mark a memory range as not expected to be used in the near future. The hint can help kernel in deciding which pages to evict early during memory pressure. It works for every LRU pages like MADV_[DONTNEED|FREE]. IOW, It moves active file page -> inactive file LRU active anon page -> inacdtive anon LRU Unlike MADV_FREE, it doesn't move active anonymous pages to inactive file LRU's head because MADV_COLD is a little bit different symantic. MADV_FREE means it's okay to discard when the memory pressure because the content of the page is *garbage* so freeing such pages is almost zero overhead since we don't need to swap out and access afterward causes just minor fault. Thus, it would make sense to put those freeable pages in inactive file LRU to compete other used-once pages. It makes sense for implmentaion point of view, too because it's not swapbacked memory any longer until it would be re-dirtied. Even, it could give a bonus to make them be reclaimed on swapless system. However, MADV_COLD doesn't mean garbage so reclaiming them requires swap-out/in in the end so it's bigger cost. Since we have designed VM LRU aging based on cost-model, anonymous cold pages would be better to position inactive anon's LRU list, not file LRU. Furthermore, it would help to avoid unnecessary scanning if system doesn't have a swap device. Let's start simpler way without adding complexity at this moment. However, keep in mind, too that it's a caveat that workloads with a lot of pages cache are likely to ignore MADV_COLD on anonymous memory because we rarely age anonymous LRU lists. * man-page material MADV_COLD (since Linux x.x) Pages in the specified regions will be treated as less-recently-accessed compared to pages in the system with similar access frequencies. In contrast to MADV_FREE, the contents of the region are preserved regardless of subsequent writes to pages. MADV_COLD cannot be applied to locked pages, Huge TLB pages, or VM_PFNMAP pages. [akpm@linux-foundation.org: resolve conflicts with hmm.git] Link: http://lkml.kernel.org/r/20190726023435.214162-2-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Chris Zankel <chris@zankel.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25 23:49:08 +00:00
{
mm/swap.c: serialize memcg changes in pagevec_lru_move_fn Hugh Dickins' found a memcg change bug on original version: If we want to change the pgdat->lru_lock to memcg's lruvec lock, we have to serialize mem_cgroup_move_account during pagevec_lru_move_fn. The possible bad scenario would like: cpu 0 cpu 1 lruvec = mem_cgroup_page_lruvec() if (!isolate_lru_page()) mem_cgroup_move_account spin_lock_irqsave(&lruvec->lru_lock <== wrong lock. So we need TestClearPageLRU to block isolate_lru_page(), that serializes the memcg change. and then removing the PageLRU check in move_fn callee as the consequence. __pagevec_lru_add_fn() is different from the others, because the pages it deals with are, by definition, not yet on the lru. TestClearPageLRU is not needed and would not work, so __pagevec_lru_add() goes its own way. Link: https://lkml.kernel.org/r/1604566549-62481-17-git-send-email-alex.shi@linux.alibaba.com Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:25 +00:00
if (PageActive(page) && !PageUnevictable(page)) {
int nr_pages = thp_nr_pages(page);
mm: introduce MADV_COLD Patch series "Introduce MADV_COLD and MADV_PAGEOUT", v7. - Background The Android terminology used for forking a new process and starting an app from scratch is a cold start, while resuming an existing app is a hot start. While we continually try to improve the performance of cold starts, hot starts will always be significantly less power hungry as well as faster so we are trying to make hot start more likely than cold start. To increase hot start, Android userspace manages the order that apps should be killed in a process called ActivityManagerService. ActivityManagerService tracks every Android app or service that the user could be interacting with at any time and translates that into a ranked list for lmkd(low memory killer daemon). They are likely to be killed by lmkd if the system has to reclaim memory. In that sense they are similar to entries in any other cache. Those apps are kept alive for opportunistic performance improvements but those performance improvements will vary based on the memory requirements of individual workloads. - Problem Naturally, cached apps were dominant consumers of memory on the system. However, they were not significant consumers of swap even though they are good candidate for swap. Under investigation, swapping out only begins once the low zone watermark is hit and kswapd wakes up, but the overall allocation rate in the system might trip lmkd thresholds and cause a cached process to be killed(we measured performance swapping out vs. zapping the memory by killing a process. Unsurprisingly, zapping is 10x times faster even though we use zram which is much faster than real storage) so kill from lmkd will often satisfy the high zone watermark, resulting in very few pages actually being moved to swap. - Approach The approach we chose was to use a new interface to allow userspace to proactively reclaim entire processes by leveraging platform information. This allowed us to bypass the inaccuracy of the kernel’s LRUs for pages that are known to be cold from userspace and to avoid races with lmkd by reclaiming apps as soon as they entered the cached state. Additionally, it could provide many chances for platform to use much information to optimize memory efficiency. To achieve the goal, the patchset introduce two new options for madvise. One is MADV_COLD which will deactivate activated pages and the other is MADV_PAGEOUT which will reclaim private pages instantly. These new options complement MADV_DONTNEED and MADV_FREE by adding non-destructive ways to gain some free memory space. MADV_PAGEOUT is similar to MADV_DONTNEED in a way that it hints the kernel that memory region is not currently needed and should be reclaimed immediately; MADV_COLD is similar to MADV_FREE in a way that it hints the kernel that memory region is not currently needed and should be reclaimed when memory pressure rises. This patch (of 5): When a process expects no accesses to a certain memory range, it could give a hint to kernel that the pages can be reclaimed when memory pressure happens but data should be preserved for future use. This could reduce workingset eviction so it ends up increasing performance. This patch introduces the new MADV_COLD hint to madvise(2) syscall. MADV_COLD can be used by a process to mark a memory range as not expected to be used in the near future. The hint can help kernel in deciding which pages to evict early during memory pressure. It works for every LRU pages like MADV_[DONTNEED|FREE]. IOW, It moves active file page -> inactive file LRU active anon page -> inacdtive anon LRU Unlike MADV_FREE, it doesn't move active anonymous pages to inactive file LRU's head because MADV_COLD is a little bit different symantic. MADV_FREE means it's okay to discard when the memory pressure because the content of the page is *garbage* so freeing such pages is almost zero overhead since we don't need to swap out and access afterward causes just minor fault. Thus, it would make sense to put those freeable pages in inactive file LRU to compete other used-once pages. It makes sense for implmentaion point of view, too because it's not swapbacked memory any longer until it would be re-dirtied. Even, it could give a bonus to make them be reclaimed on swapless system. However, MADV_COLD doesn't mean garbage so reclaiming them requires swap-out/in in the end so it's bigger cost. Since we have designed VM LRU aging based on cost-model, anonymous cold pages would be better to position inactive anon's LRU list, not file LRU. Furthermore, it would help to avoid unnecessary scanning if system doesn't have a swap device. Let's start simpler way without adding complexity at this moment. However, keep in mind, too that it's a caveat that workloads with a lot of pages cache are likely to ignore MADV_COLD on anonymous memory because we rarely age anonymous LRU lists. * man-page material MADV_COLD (since Linux x.x) Pages in the specified regions will be treated as less-recently-accessed compared to pages in the system with similar access frequencies. In contrast to MADV_FREE, the contents of the region are preserved regardless of subsequent writes to pages. MADV_COLD cannot be applied to locked pages, Huge TLB pages, or VM_PFNMAP pages. [akpm@linux-foundation.org: resolve conflicts with hmm.git] Link: http://lkml.kernel.org/r/20190726023435.214162-2-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Chris Zankel <chris@zankel.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25 23:49:08 +00:00
del_page_from_lru_list(page, lruvec);
mm: introduce MADV_COLD Patch series "Introduce MADV_COLD and MADV_PAGEOUT", v7. - Background The Android terminology used for forking a new process and starting an app from scratch is a cold start, while resuming an existing app is a hot start. While we continually try to improve the performance of cold starts, hot starts will always be significantly less power hungry as well as faster so we are trying to make hot start more likely than cold start. To increase hot start, Android userspace manages the order that apps should be killed in a process called ActivityManagerService. ActivityManagerService tracks every Android app or service that the user could be interacting with at any time and translates that into a ranked list for lmkd(low memory killer daemon). They are likely to be killed by lmkd if the system has to reclaim memory. In that sense they are similar to entries in any other cache. Those apps are kept alive for opportunistic performance improvements but those performance improvements will vary based on the memory requirements of individual workloads. - Problem Naturally, cached apps were dominant consumers of memory on the system. However, they were not significant consumers of swap even though they are good candidate for swap. Under investigation, swapping out only begins once the low zone watermark is hit and kswapd wakes up, but the overall allocation rate in the system might trip lmkd thresholds and cause a cached process to be killed(we measured performance swapping out vs. zapping the memory by killing a process. Unsurprisingly, zapping is 10x times faster even though we use zram which is much faster than real storage) so kill from lmkd will often satisfy the high zone watermark, resulting in very few pages actually being moved to swap. - Approach The approach we chose was to use a new interface to allow userspace to proactively reclaim entire processes by leveraging platform information. This allowed us to bypass the inaccuracy of the kernel’s LRUs for pages that are known to be cold from userspace and to avoid races with lmkd by reclaiming apps as soon as they entered the cached state. Additionally, it could provide many chances for platform to use much information to optimize memory efficiency. To achieve the goal, the patchset introduce two new options for madvise. One is MADV_COLD which will deactivate activated pages and the other is MADV_PAGEOUT which will reclaim private pages instantly. These new options complement MADV_DONTNEED and MADV_FREE by adding non-destructive ways to gain some free memory space. MADV_PAGEOUT is similar to MADV_DONTNEED in a way that it hints the kernel that memory region is not currently needed and should be reclaimed immediately; MADV_COLD is similar to MADV_FREE in a way that it hints the kernel that memory region is not currently needed and should be reclaimed when memory pressure rises. This patch (of 5): When a process expects no accesses to a certain memory range, it could give a hint to kernel that the pages can be reclaimed when memory pressure happens but data should be preserved for future use. This could reduce workingset eviction so it ends up increasing performance. This patch introduces the new MADV_COLD hint to madvise(2) syscall. MADV_COLD can be used by a process to mark a memory range as not expected to be used in the near future. The hint can help kernel in deciding which pages to evict early during memory pressure. It works for every LRU pages like MADV_[DONTNEED|FREE]. IOW, It moves active file page -> inactive file LRU active anon page -> inacdtive anon LRU Unlike MADV_FREE, it doesn't move active anonymous pages to inactive file LRU's head because MADV_COLD is a little bit different symantic. MADV_FREE means it's okay to discard when the memory pressure because the content of the page is *garbage* so freeing such pages is almost zero overhead since we don't need to swap out and access afterward causes just minor fault. Thus, it would make sense to put those freeable pages in inactive file LRU to compete other used-once pages. It makes sense for implmentaion point of view, too because it's not swapbacked memory any longer until it would be re-dirtied. Even, it could give a bonus to make them be reclaimed on swapless system. However, MADV_COLD doesn't mean garbage so reclaiming them requires swap-out/in in the end so it's bigger cost. Since we have designed VM LRU aging based on cost-model, anonymous cold pages would be better to position inactive anon's LRU list, not file LRU. Furthermore, it would help to avoid unnecessary scanning if system doesn't have a swap device. Let's start simpler way without adding complexity at this moment. However, keep in mind, too that it's a caveat that workloads with a lot of pages cache are likely to ignore MADV_COLD on anonymous memory because we rarely age anonymous LRU lists. * man-page material MADV_COLD (since Linux x.x) Pages in the specified regions will be treated as less-recently-accessed compared to pages in the system with similar access frequencies. In contrast to MADV_FREE, the contents of the region are preserved regardless of subsequent writes to pages. MADV_COLD cannot be applied to locked pages, Huge TLB pages, or VM_PFNMAP pages. [akpm@linux-foundation.org: resolve conflicts with hmm.git] Link: http://lkml.kernel.org/r/20190726023435.214162-2-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Chris Zankel <chris@zankel.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25 23:49:08 +00:00
ClearPageActive(page);
ClearPageReferenced(page);
add_page_to_lru_list(page, lruvec);
mm: introduce MADV_COLD Patch series "Introduce MADV_COLD and MADV_PAGEOUT", v7. - Background The Android terminology used for forking a new process and starting an app from scratch is a cold start, while resuming an existing app is a hot start. While we continually try to improve the performance of cold starts, hot starts will always be significantly less power hungry as well as faster so we are trying to make hot start more likely than cold start. To increase hot start, Android userspace manages the order that apps should be killed in a process called ActivityManagerService. ActivityManagerService tracks every Android app or service that the user could be interacting with at any time and translates that into a ranked list for lmkd(low memory killer daemon). They are likely to be killed by lmkd if the system has to reclaim memory. In that sense they are similar to entries in any other cache. Those apps are kept alive for opportunistic performance improvements but those performance improvements will vary based on the memory requirements of individual workloads. - Problem Naturally, cached apps were dominant consumers of memory on the system. However, they were not significant consumers of swap even though they are good candidate for swap. Under investigation, swapping out only begins once the low zone watermark is hit and kswapd wakes up, but the overall allocation rate in the system might trip lmkd thresholds and cause a cached process to be killed(we measured performance swapping out vs. zapping the memory by killing a process. Unsurprisingly, zapping is 10x times faster even though we use zram which is much faster than real storage) so kill from lmkd will often satisfy the high zone watermark, resulting in very few pages actually being moved to swap. - Approach The approach we chose was to use a new interface to allow userspace to proactively reclaim entire processes by leveraging platform information. This allowed us to bypass the inaccuracy of the kernel’s LRUs for pages that are known to be cold from userspace and to avoid races with lmkd by reclaiming apps as soon as they entered the cached state. Additionally, it could provide many chances for platform to use much information to optimize memory efficiency. To achieve the goal, the patchset introduce two new options for madvise. One is MADV_COLD which will deactivate activated pages and the other is MADV_PAGEOUT which will reclaim private pages instantly. These new options complement MADV_DONTNEED and MADV_FREE by adding non-destructive ways to gain some free memory space. MADV_PAGEOUT is similar to MADV_DONTNEED in a way that it hints the kernel that memory region is not currently needed and should be reclaimed immediately; MADV_COLD is similar to MADV_FREE in a way that it hints the kernel that memory region is not currently needed and should be reclaimed when memory pressure rises. This patch (of 5): When a process expects no accesses to a certain memory range, it could give a hint to kernel that the pages can be reclaimed when memory pressure happens but data should be preserved for future use. This could reduce workingset eviction so it ends up increasing performance. This patch introduces the new MADV_COLD hint to madvise(2) syscall. MADV_COLD can be used by a process to mark a memory range as not expected to be used in the near future. The hint can help kernel in deciding which pages to evict early during memory pressure. It works for every LRU pages like MADV_[DONTNEED|FREE]. IOW, It moves active file page -> inactive file LRU active anon page -> inacdtive anon LRU Unlike MADV_FREE, it doesn't move active anonymous pages to inactive file LRU's head because MADV_COLD is a little bit different symantic. MADV_FREE means it's okay to discard when the memory pressure because the content of the page is *garbage* so freeing such pages is almost zero overhead since we don't need to swap out and access afterward causes just minor fault. Thus, it would make sense to put those freeable pages in inactive file LRU to compete other used-once pages. It makes sense for implmentaion point of view, too because it's not swapbacked memory any longer until it would be re-dirtied. Even, it could give a bonus to make them be reclaimed on swapless system. However, MADV_COLD doesn't mean garbage so reclaiming them requires swap-out/in in the end so it's bigger cost. Since we have designed VM LRU aging based on cost-model, anonymous cold pages would be better to position inactive anon's LRU list, not file LRU. Furthermore, it would help to avoid unnecessary scanning if system doesn't have a swap device. Let's start simpler way without adding complexity at this moment. However, keep in mind, too that it's a caveat that workloads with a lot of pages cache are likely to ignore MADV_COLD on anonymous memory because we rarely age anonymous LRU lists. * man-page material MADV_COLD (since Linux x.x) Pages in the specified regions will be treated as less-recently-accessed compared to pages in the system with similar access frequencies. In contrast to MADV_FREE, the contents of the region are preserved regardless of subsequent writes to pages. MADV_COLD cannot be applied to locked pages, Huge TLB pages, or VM_PFNMAP pages. [akpm@linux-foundation.org: resolve conflicts with hmm.git] Link: http://lkml.kernel.org/r/20190726023435.214162-2-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Chris Zankel <chris@zankel.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25 23:49:08 +00:00
__count_vm_events(PGDEACTIVATE, nr_pages);
__count_memcg_events(lruvec_memcg(lruvec), PGDEACTIVATE,
nr_pages);
mm: introduce MADV_COLD Patch series "Introduce MADV_COLD and MADV_PAGEOUT", v7. - Background The Android terminology used for forking a new process and starting an app from scratch is a cold start, while resuming an existing app is a hot start. While we continually try to improve the performance of cold starts, hot starts will always be significantly less power hungry as well as faster so we are trying to make hot start more likely than cold start. To increase hot start, Android userspace manages the order that apps should be killed in a process called ActivityManagerService. ActivityManagerService tracks every Android app or service that the user could be interacting with at any time and translates that into a ranked list for lmkd(low memory killer daemon). They are likely to be killed by lmkd if the system has to reclaim memory. In that sense they are similar to entries in any other cache. Those apps are kept alive for opportunistic performance improvements but those performance improvements will vary based on the memory requirements of individual workloads. - Problem Naturally, cached apps were dominant consumers of memory on the system. However, they were not significant consumers of swap even though they are good candidate for swap. Under investigation, swapping out only begins once the low zone watermark is hit and kswapd wakes up, but the overall allocation rate in the system might trip lmkd thresholds and cause a cached process to be killed(we measured performance swapping out vs. zapping the memory by killing a process. Unsurprisingly, zapping is 10x times faster even though we use zram which is much faster than real storage) so kill from lmkd will often satisfy the high zone watermark, resulting in very few pages actually being moved to swap. - Approach The approach we chose was to use a new interface to allow userspace to proactively reclaim entire processes by leveraging platform information. This allowed us to bypass the inaccuracy of the kernel’s LRUs for pages that are known to be cold from userspace and to avoid races with lmkd by reclaiming apps as soon as they entered the cached state. Additionally, it could provide many chances for platform to use much information to optimize memory efficiency. To achieve the goal, the patchset introduce two new options for madvise. One is MADV_COLD which will deactivate activated pages and the other is MADV_PAGEOUT which will reclaim private pages instantly. These new options complement MADV_DONTNEED and MADV_FREE by adding non-destructive ways to gain some free memory space. MADV_PAGEOUT is similar to MADV_DONTNEED in a way that it hints the kernel that memory region is not currently needed and should be reclaimed immediately; MADV_COLD is similar to MADV_FREE in a way that it hints the kernel that memory region is not currently needed and should be reclaimed when memory pressure rises. This patch (of 5): When a process expects no accesses to a certain memory range, it could give a hint to kernel that the pages can be reclaimed when memory pressure happens but data should be preserved for future use. This could reduce workingset eviction so it ends up increasing performance. This patch introduces the new MADV_COLD hint to madvise(2) syscall. MADV_COLD can be used by a process to mark a memory range as not expected to be used in the near future. The hint can help kernel in deciding which pages to evict early during memory pressure. It works for every LRU pages like MADV_[DONTNEED|FREE]. IOW, It moves active file page -> inactive file LRU active anon page -> inacdtive anon LRU Unlike MADV_FREE, it doesn't move active anonymous pages to inactive file LRU's head because MADV_COLD is a little bit different symantic. MADV_FREE means it's okay to discard when the memory pressure because the content of the page is *garbage* so freeing such pages is almost zero overhead since we don't need to swap out and access afterward causes just minor fault. Thus, it would make sense to put those freeable pages in inactive file LRU to compete other used-once pages. It makes sense for implmentaion point of view, too because it's not swapbacked memory any longer until it would be re-dirtied. Even, it could give a bonus to make them be reclaimed on swapless system. However, MADV_COLD doesn't mean garbage so reclaiming them requires swap-out/in in the end so it's bigger cost. Since we have designed VM LRU aging based on cost-model, anonymous cold pages would be better to position inactive anon's LRU list, not file LRU. Furthermore, it would help to avoid unnecessary scanning if system doesn't have a swap device. Let's start simpler way without adding complexity at this moment. However, keep in mind, too that it's a caveat that workloads with a lot of pages cache are likely to ignore MADV_COLD on anonymous memory because we rarely age anonymous LRU lists. * man-page material MADV_COLD (since Linux x.x) Pages in the specified regions will be treated as less-recently-accessed compared to pages in the system with similar access frequencies. In contrast to MADV_FREE, the contents of the region are preserved regardless of subsequent writes to pages. MADV_COLD cannot be applied to locked pages, Huge TLB pages, or VM_PFNMAP pages. [akpm@linux-foundation.org: resolve conflicts with hmm.git] Link: http://lkml.kernel.org/r/20190726023435.214162-2-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Chris Zankel <chris@zankel.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25 23:49:08 +00:00
}
}
mm: move lazily freed pages to inactive list MADV_FREE is a hint that it's okay to discard pages if there is memory pressure and we use reclaimers(ie, kswapd and direct reclaim) to free them so there is no value keeping them in the active anonymous LRU so this patch moves them to inactive LRU list's head. This means that MADV_FREE-ed pages which were living on the inactive list are reclaimed first because they are more likely to be cold rather than recently active pages. An arguable issue for the approach would be whether we should put the page to the head or tail of the inactive list. I chose head because the kernel cannot make sure it's really cold or warm for every MADV_FREE usecase but at least we know it's not *hot*, so landing of inactive head would be a comprimise for various usecases. This fixes suboptimal behavior of MADV_FREE when pages living on the active list will sit there for a long time even under memory pressure while the inactive list is reclaimed heavily. This basically breaks the whole purpose of using MADV_FREE to help the system to free memory which is might not be used. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:55:11 +00:00
mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn Fold the PGROTATED event collection into pagevec_move_tail_fn call back func like other funcs does in pagevec_lru_move_fn. Thus we could save func call pagevec_move_tail(). Now all usage of pagevec_lru_move_fn are same and no needs of its 3rd parameter. It's just simply the calling. No functional change. [lkp@intel.com: found a build issue in the original patch, thanks] Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:56 +00:00
static void lru_lazyfree_fn(struct page *page, struct lruvec *lruvec)
mm: move lazily freed pages to inactive list MADV_FREE is a hint that it's okay to discard pages if there is memory pressure and we use reclaimers(ie, kswapd and direct reclaim) to free them so there is no value keeping them in the active anonymous LRU so this patch moves them to inactive LRU list's head. This means that MADV_FREE-ed pages which were living on the inactive list are reclaimed first because they are more likely to be cold rather than recently active pages. An arguable issue for the approach would be whether we should put the page to the head or tail of the inactive list. I chose head because the kernel cannot make sure it's really cold or warm for every MADV_FREE usecase but at least we know it's not *hot*, so landing of inactive head would be a comprimise for various usecases. This fixes suboptimal behavior of MADV_FREE when pages living on the active list will sit there for a long time even under memory pressure while the inactive list is reclaimed heavily. This basically breaks the whole purpose of using MADV_FREE to help the system to free memory which is might not be used. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:55:11 +00:00
{
mm/swap.c: serialize memcg changes in pagevec_lru_move_fn Hugh Dickins' found a memcg change bug on original version: If we want to change the pgdat->lru_lock to memcg's lruvec lock, we have to serialize mem_cgroup_move_account during pagevec_lru_move_fn. The possible bad scenario would like: cpu 0 cpu 1 lruvec = mem_cgroup_page_lruvec() if (!isolate_lru_page()) mem_cgroup_move_account spin_lock_irqsave(&lruvec->lru_lock <== wrong lock. So we need TestClearPageLRU to block isolate_lru_page(), that serializes the memcg change. and then removing the PageLRU check in move_fn callee as the consequence. __pagevec_lru_add_fn() is different from the others, because the pages it deals with are, by definition, not yet on the lru. TestClearPageLRU is not needed and would not work, so __pagevec_lru_add() goes its own way. Link: https://lkml.kernel.org/r/1604566549-62481-17-git-send-email-alex.shi@linux.alibaba.com Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:25 +00:00
if (PageAnon(page) && PageSwapBacked(page) &&
mm: avoid marking swap cached page as lazyfree MADV_FREE clears pte dirty bit and then marks the page lazyfree (clear SwapBacked). There is no lock to prevent the page is added to swap cache between these two steps by page reclaim. Page reclaim could add the page to swap cache and unmap the page. After page reclaim, the page is added back to lru. At that time, we probably start draining per-cpu pagevec and mark the page lazyfree. So the page could be in a state with SwapBacked cleared and PG_swapcache set. Next time there is a refault in the virtual address, do_swap_page can find the page from swap cache but the page has PageSwapCache false because SwapBacked isn't set, so do_swap_page will bail out and do nothing. The task will keep running into fault handler. Fixes: 802a3a92ad7a ("mm: reclaim MADV_FREE pages") Link: http://lkml.kernel.org/r/6537ef3814398c0073630b03f176263bc81f0902.1506446061.git.shli@fb.com Signed-off-by: Shaohua Li <shli@fb.com> Reported-by: Artem Savkov <asavkov@redhat.com> Tested-by: Artem Savkov <asavkov@redhat.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> [4.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03 23:15:29 +00:00
!PageSwapCache(page) && !PageUnevictable(page)) {
int nr_pages = thp_nr_pages(page);
mm: move lazily freed pages to inactive list MADV_FREE is a hint that it's okay to discard pages if there is memory pressure and we use reclaimers(ie, kswapd and direct reclaim) to free them so there is no value keeping them in the active anonymous LRU so this patch moves them to inactive LRU list's head. This means that MADV_FREE-ed pages which were living on the inactive list are reclaimed first because they are more likely to be cold rather than recently active pages. An arguable issue for the approach would be whether we should put the page to the head or tail of the inactive list. I chose head because the kernel cannot make sure it's really cold or warm for every MADV_FREE usecase but at least we know it's not *hot*, so landing of inactive head would be a comprimise for various usecases. This fixes suboptimal behavior of MADV_FREE when pages living on the active list will sit there for a long time even under memory pressure while the inactive list is reclaimed heavily. This basically breaks the whole purpose of using MADV_FREE to help the system to free memory which is might not be used. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:55:11 +00:00
del_page_from_lru_list(page, lruvec);
mm: move lazily freed pages to inactive list MADV_FREE is a hint that it's okay to discard pages if there is memory pressure and we use reclaimers(ie, kswapd and direct reclaim) to free them so there is no value keeping them in the active anonymous LRU so this patch moves them to inactive LRU list's head. This means that MADV_FREE-ed pages which were living on the inactive list are reclaimed first because they are more likely to be cold rather than recently active pages. An arguable issue for the approach would be whether we should put the page to the head or tail of the inactive list. I chose head because the kernel cannot make sure it's really cold or warm for every MADV_FREE usecase but at least we know it's not *hot*, so landing of inactive head would be a comprimise for various usecases. This fixes suboptimal behavior of MADV_FREE when pages living on the active list will sit there for a long time even under memory pressure while the inactive list is reclaimed heavily. This basically breaks the whole purpose of using MADV_FREE to help the system to free memory which is might not be used. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:55:11 +00:00
ClearPageActive(page);
ClearPageReferenced(page);
mm: move MADV_FREE pages into LRU_INACTIVE_FILE list madv()'s MADV_FREE indicate pages are 'lazyfree'. They are still anonymous pages, but they can be freed without pageout. To distinguish these from normal anonymous pages, we clear their SwapBacked flag. MADV_FREE pages could be freed without pageout, so they pretty much like used once file pages. For such pages, we'd like to reclaim them once there is memory pressure. Also it might be unfair reclaiming MADV_FREE pages always before used once file pages and we definitively want to reclaim the pages before other anonymous and file pages. To speed up MADV_FREE pages reclaim, we put the pages into LRU_INACTIVE_FILE list. The rationale is LRU_INACTIVE_FILE list is tiny nowadays and should be full of used once file pages. Reclaiming MADV_FREE pages will not have much interfere of anonymous and active file pages. And the inactive file pages and MADV_FREE pages will be reclaimed according to their age, so we don't reclaim too many MADV_FREE pages too. Putting the MADV_FREE pages into LRU_INACTIVE_FILE_LIST also means we can reclaim the pages without swap support. This idea is suggested by Johannes. This patch doesn't move MADV_FREE pages to LRU_INACTIVE_FILE list yet to avoid bisect failure, next patch will do it. The patch is based on Minchan's original patch. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/2f87063c1e9354677b7618c647abde77b07561e5.1487965799.git.shli@fb.com Signed-off-by: Shaohua Li <shli@fb.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 21:52:29 +00:00
/*
* Lazyfree pages are clean anonymous pages. They have
* PG_swapbacked flag cleared, to distinguish them from normal
* anonymous pages
mm: move MADV_FREE pages into LRU_INACTIVE_FILE list madv()'s MADV_FREE indicate pages are 'lazyfree'. They are still anonymous pages, but they can be freed without pageout. To distinguish these from normal anonymous pages, we clear their SwapBacked flag. MADV_FREE pages could be freed without pageout, so they pretty much like used once file pages. For such pages, we'd like to reclaim them once there is memory pressure. Also it might be unfair reclaiming MADV_FREE pages always before used once file pages and we definitively want to reclaim the pages before other anonymous and file pages. To speed up MADV_FREE pages reclaim, we put the pages into LRU_INACTIVE_FILE list. The rationale is LRU_INACTIVE_FILE list is tiny nowadays and should be full of used once file pages. Reclaiming MADV_FREE pages will not have much interfere of anonymous and active file pages. And the inactive file pages and MADV_FREE pages will be reclaimed according to their age, so we don't reclaim too many MADV_FREE pages too. Putting the MADV_FREE pages into LRU_INACTIVE_FILE_LIST also means we can reclaim the pages without swap support. This idea is suggested by Johannes. This patch doesn't move MADV_FREE pages to LRU_INACTIVE_FILE list yet to avoid bisect failure, next patch will do it. The patch is based on Minchan's original patch. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/2f87063c1e9354677b7618c647abde77b07561e5.1487965799.git.shli@fb.com Signed-off-by: Shaohua Li <shli@fb.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 21:52:29 +00:00
*/
ClearPageSwapBacked(page);
add_page_to_lru_list(page, lruvec);
mm: move lazily freed pages to inactive list MADV_FREE is a hint that it's okay to discard pages if there is memory pressure and we use reclaimers(ie, kswapd and direct reclaim) to free them so there is no value keeping them in the active anonymous LRU so this patch moves them to inactive LRU list's head. This means that MADV_FREE-ed pages which were living on the inactive list are reclaimed first because they are more likely to be cold rather than recently active pages. An arguable issue for the approach would be whether we should put the page to the head or tail of the inactive list. I chose head because the kernel cannot make sure it's really cold or warm for every MADV_FREE usecase but at least we know it's not *hot*, so landing of inactive head would be a comprimise for various usecases. This fixes suboptimal behavior of MADV_FREE when pages living on the active list will sit there for a long time even under memory pressure while the inactive list is reclaimed heavily. This basically breaks the whole purpose of using MADV_FREE to help the system to free memory which is might not be used. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:55:11 +00:00
__count_vm_events(PGLAZYFREE, nr_pages);
__count_memcg_events(lruvec_memcg(lruvec), PGLAZYFREE,
nr_pages);
mm: move lazily freed pages to inactive list MADV_FREE is a hint that it's okay to discard pages if there is memory pressure and we use reclaimers(ie, kswapd and direct reclaim) to free them so there is no value keeping them in the active anonymous LRU so this patch moves them to inactive LRU list's head. This means that MADV_FREE-ed pages which were living on the inactive list are reclaimed first because they are more likely to be cold rather than recently active pages. An arguable issue for the approach would be whether we should put the page to the head or tail of the inactive list. I chose head because the kernel cannot make sure it's really cold or warm for every MADV_FREE usecase but at least we know it's not *hot*, so landing of inactive head would be a comprimise for various usecases. This fixes suboptimal behavior of MADV_FREE when pages living on the active list will sit there for a long time even under memory pressure while the inactive list is reclaimed heavily. This basically breaks the whole purpose of using MADV_FREE to help the system to free memory which is might not be used. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:55:11 +00:00
}
}
mm: use pagevec to rotate reclaimable page While running some memory intensive load, system response deteriorated just after swap-out started. The cause of this problem is that when a PG_reclaim page is moved to the tail of the inactive LRU list in rotate_reclaimable_page(), lru_lock spin lock is acquired every page writeback . This deteriorates system performance and makes interrupt hold off time longer when swap-out started. Following patch solves this problem. I use pagevec in rotating reclaimable pages to mitigate LRU spin lock contention and reduce interrupt hold off time. I did a test that allocating and touching pages in multiple processes, and pinging to the test machine in flooding mode to measure response under memory intensive load. The test result is: -2.6.23-rc5 --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 53222ms rtt min/avg/max/mdev = 0.074/0.652/172.228/7.176 ms, pipe 11, ipg/ewma 17.746/0.092 ms -2.6.23-rc5-patched --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma 17.314/0.091 ms Max round-trip-time was improved. The test machine spec is that 4CPU(3.16GHz, Hyper-threading enabled) 8GB memory , 8GB swap. I did ping test again to observe performance deterioration caused by taking a ref. -2.6.23-rc6-with-modifiedpatch --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 53386ms rtt min/avg/max/mdev = 0.074/0.110/4.716/0.147 ms, pipe 2, ipg/ewma 17.801/0.129 ms The result for my original patch is as follows. -2.6.23-rc5-with-originalpatch --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma 17.314/0.091 ms The influence to response was small. [akpm@linux-foundation.org: fix uninitalised var warning] [hugh@veritas.com: fix locking] [randy.dunlap@oracle.com: fix function declaration] [hugh@veritas.com: fix BUG at include/linux/mm.h:220!] [hugh@veritas.com: kill redundancy in rotate_reclaimable_page] [hugh@veritas.com: move_tail_pages into lru_add_drain] Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 08:24:52 +00:00
/*
* Drain pages out of the cpu's pagevecs.
* Either "cpu" is the current CPU, and preemption has already been
* disabled; or "cpu" is being hot-unplugged, and is already dead.
*/
void lru_add_drain_cpu(int cpu)
{
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
struct pagevec *pvec = &per_cpu(lru_pvecs.lru_add, cpu);
if (pagevec_count(pvec))
__pagevec_lru_add(pvec);
mm: use pagevec to rotate reclaimable page While running some memory intensive load, system response deteriorated just after swap-out started. The cause of this problem is that when a PG_reclaim page is moved to the tail of the inactive LRU list in rotate_reclaimable_page(), lru_lock spin lock is acquired every page writeback . This deteriorates system performance and makes interrupt hold off time longer when swap-out started. Following patch solves this problem. I use pagevec in rotating reclaimable pages to mitigate LRU spin lock contention and reduce interrupt hold off time. I did a test that allocating and touching pages in multiple processes, and pinging to the test machine in flooding mode to measure response under memory intensive load. The test result is: -2.6.23-rc5 --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 53222ms rtt min/avg/max/mdev = 0.074/0.652/172.228/7.176 ms, pipe 11, ipg/ewma 17.746/0.092 ms -2.6.23-rc5-patched --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma 17.314/0.091 ms Max round-trip-time was improved. The test machine spec is that 4CPU(3.16GHz, Hyper-threading enabled) 8GB memory , 8GB swap. I did ping test again to observe performance deterioration caused by taking a ref. -2.6.23-rc6-with-modifiedpatch --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 53386ms rtt min/avg/max/mdev = 0.074/0.110/4.716/0.147 ms, pipe 2, ipg/ewma 17.801/0.129 ms The result for my original patch is as follows. -2.6.23-rc5-with-originalpatch --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma 17.314/0.091 ms The influence to response was small. [akpm@linux-foundation.org: fix uninitalised var warning] [hugh@veritas.com: fix locking] [randy.dunlap@oracle.com: fix function declaration] [hugh@veritas.com: fix BUG at include/linux/mm.h:220!] [hugh@veritas.com: kill redundancy in rotate_reclaimable_page] [hugh@veritas.com: move_tail_pages into lru_add_drain] Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 08:24:52 +00:00
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
pvec = &per_cpu(lru_rotate.pvec, cpu);
mm/swap.c: annotate data races for lru_rotate_pvecs Read to lru_add_pvec->nr could be interrupted and then write to the same variable. The write has local interrupt disabled, but the plain reads result in data races. However, it is unlikely the compilers could do much damage here given that lru_add_pvec->nr is a "unsigned char" and there is an existing compiler barrier. Thus, annotate the reads using the data_race() macro. The data races were reported by KCSAN, BUG: KCSAN: data-race in lru_add_drain_cpu / rotate_reclaimable_page write to 0xffff9291ebcb8a40 of 1 bytes by interrupt on cpu 23: rotate_reclaimable_page+0x2df/0x490 pagevec_add at include/linux/pagevec.h:81 (inlined by) rotate_reclaimable_page at mm/swap.c:259 end_page_writeback+0x1b5/0x2b0 end_swap_bio_write+0x1d0/0x280 bio_endio+0x297/0x560 dec_pending+0x218/0x430 [dm_mod] clone_endio+0xe4/0x2c0 [dm_mod] bio_endio+0x297/0x560 blk_update_request+0x201/0x920 scsi_end_request+0x6b/0x4a0 scsi_io_completion+0xb7/0x7e0 scsi_finish_command+0x1ed/0x2a0 scsi_softirq_done+0x1c9/0x1d0 blk_done_softirq+0x181/0x1d0 __do_softirq+0xd9/0x57c irq_exit+0xa2/0xc0 do_IRQ+0x8b/0x190 ret_from_intr+0x0/0x42 delay_tsc+0x46/0x80 __const_udelay+0x3c/0x40 __udelay+0x10/0x20 kcsan_setup_watchpoint+0x202/0x3a0 __tsan_read1+0xc2/0x100 lru_add_drain_cpu+0xb8/0x3f0 lru_add_drain+0x25/0x40 shrink_active_list+0xe1/0xc80 shrink_lruvec+0x766/0xb70 shrink_node+0x2d6/0xca0 do_try_to_free_pages+0x1f7/0x9a0 try_to_free_pages+0x252/0x5b0 __alloc_pages_slowpath+0x458/0x1290 __alloc_pages_nodemask+0x3bb/0x450 alloc_pages_vma+0x8a/0x2c0 do_anonymous_page+0x16e/0x6f0 __handle_mm_fault+0xcd5/0xd40 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 read to 0xffff9291ebcb8a40 of 1 bytes by task 37761 on cpu 23: lru_add_drain_cpu+0xb8/0x3f0 lru_add_drain_cpu at mm/swap.c:602 lru_add_drain+0x25/0x40 shrink_active_list+0xe1/0xc80 shrink_lruvec+0x766/0xb70 shrink_node+0x2d6/0xca0 do_try_to_free_pages+0x1f7/0x9a0 try_to_free_pages+0x252/0x5b0 __alloc_pages_slowpath+0x458/0x1290 __alloc_pages_nodemask+0x3bb/0x450 alloc_pages_vma+0x8a/0x2c0 do_anonymous_page+0x16e/0x6f0 __handle_mm_fault+0xcd5/0xd40 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 2 locks held by oom02/37761: #0: ffff9281e5928808 (&mm->mmap_sem#2){++++}, at: do_page_fault #1: ffffffffb3ade380 (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part irq event stamp: 1949217 trace_hardirqs_on_thunk+0x1a/0x1c __do_softirq+0x2e7/0x57c __do_softirq+0x34c/0x57c irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: CPU: 23 PID: 37761 Comm: oom02 Not tainted 5.6.0-rc3-next-20200226+ #6 Hardware name: HP ProLiant BL660c Gen9, BIOS I38 10/17/2018 Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Marco Elver <elver@google.com> Link: http://lkml.kernel.org/r/20200228044018.1263-1-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-15 00:31:50 +00:00
/* Disabling interrupts below acts as a compiler barrier. */
if (data_race(pagevec_count(pvec))) {
mm: use pagevec to rotate reclaimable page While running some memory intensive load, system response deteriorated just after swap-out started. The cause of this problem is that when a PG_reclaim page is moved to the tail of the inactive LRU list in rotate_reclaimable_page(), lru_lock spin lock is acquired every page writeback . This deteriorates system performance and makes interrupt hold off time longer when swap-out started. Following patch solves this problem. I use pagevec in rotating reclaimable pages to mitigate LRU spin lock contention and reduce interrupt hold off time. I did a test that allocating and touching pages in multiple processes, and pinging to the test machine in flooding mode to measure response under memory intensive load. The test result is: -2.6.23-rc5 --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 53222ms rtt min/avg/max/mdev = 0.074/0.652/172.228/7.176 ms, pipe 11, ipg/ewma 17.746/0.092 ms -2.6.23-rc5-patched --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma 17.314/0.091 ms Max round-trip-time was improved. The test machine spec is that 4CPU(3.16GHz, Hyper-threading enabled) 8GB memory , 8GB swap. I did ping test again to observe performance deterioration caused by taking a ref. -2.6.23-rc6-with-modifiedpatch --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 53386ms rtt min/avg/max/mdev = 0.074/0.110/4.716/0.147 ms, pipe 2, ipg/ewma 17.801/0.129 ms The result for my original patch is as follows. -2.6.23-rc5-with-originalpatch --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma 17.314/0.091 ms The influence to response was small. [akpm@linux-foundation.org: fix uninitalised var warning] [hugh@veritas.com: fix locking] [randy.dunlap@oracle.com: fix function declaration] [hugh@veritas.com: fix BUG at include/linux/mm.h:220!] [hugh@veritas.com: kill redundancy in rotate_reclaimable_page] [hugh@veritas.com: move_tail_pages into lru_add_drain] Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 08:24:52 +00:00
unsigned long flags;
/* No harm done if a racing interrupt already did this */
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
local_lock_irqsave(&lru_rotate.lock, flags);
mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn Fold the PGROTATED event collection into pagevec_move_tail_fn call back func like other funcs does in pagevec_lru_move_fn. Thus we could save func call pagevec_move_tail(). Now all usage of pagevec_lru_move_fn are same and no needs of its 3rd parameter. It's just simply the calling. No functional change. [lkp@intel.com: found a build issue in the original patch, thanks] Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:56 +00:00
pagevec_lru_move_fn(pvec, pagevec_move_tail_fn);
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
local_unlock_irqrestore(&lru_rotate.lock, flags);
mm: use pagevec to rotate reclaimable page While running some memory intensive load, system response deteriorated just after swap-out started. The cause of this problem is that when a PG_reclaim page is moved to the tail of the inactive LRU list in rotate_reclaimable_page(), lru_lock spin lock is acquired every page writeback . This deteriorates system performance and makes interrupt hold off time longer when swap-out started. Following patch solves this problem. I use pagevec in rotating reclaimable pages to mitigate LRU spin lock contention and reduce interrupt hold off time. I did a test that allocating and touching pages in multiple processes, and pinging to the test machine in flooding mode to measure response under memory intensive load. The test result is: -2.6.23-rc5 --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 53222ms rtt min/avg/max/mdev = 0.074/0.652/172.228/7.176 ms, pipe 11, ipg/ewma 17.746/0.092 ms -2.6.23-rc5-patched --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma 17.314/0.091 ms Max round-trip-time was improved. The test machine spec is that 4CPU(3.16GHz, Hyper-threading enabled) 8GB memory , 8GB swap. I did ping test again to observe performance deterioration caused by taking a ref. -2.6.23-rc6-with-modifiedpatch --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 53386ms rtt min/avg/max/mdev = 0.074/0.110/4.716/0.147 ms, pipe 2, ipg/ewma 17.801/0.129 ms The result for my original patch is as follows. -2.6.23-rc5-with-originalpatch --- testmachine ping statistics --- 3000 packets transmitted, 3000 received, 0% packet loss, time 51924ms rtt min/avg/max/mdev = 0.072/0.108/3.884/0.114 ms, pipe 2, ipg/ewma 17.314/0.091 ms The influence to response was small. [akpm@linux-foundation.org: fix uninitalised var warning] [hugh@veritas.com: fix locking] [randy.dunlap@oracle.com: fix function declaration] [hugh@veritas.com: fix BUG at include/linux/mm.h:220!] [hugh@veritas.com: kill redundancy in rotate_reclaimable_page] [hugh@veritas.com: move_tail_pages into lru_add_drain] Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 08:24:52 +00:00
}
mm: deactivate invalidated pages Recently, there are reported problem about thrashing. (http://marc.info/?l=rsync&m=128885034930933&w=2) It happens by backup workloads(ex, nightly rsync). That's because the workload makes just use-once pages and touches pages twice. It promotes the page into active list so that it results in working set page eviction. Some app developer want to support POSIX_FADV_NOREUSE. But other OSes don't support it, either. (http://marc.info/?l=linux-mm&m=128928979512086&w=2) By other approach, app developers use POSIX_FADV_DONTNEED. But it has a problem. If kernel meets page is writing during invalidate_mapping_pages, it can't work. It makes for application programmer to use it since they always have to sync data before calling fadivse(..POSIX_FADV_DONTNEED) to make sure the pages could be discardable. At last, they can't use deferred write of kernel so that they could see performance loss. (http://insights.oetiker.ch/linux/fadvise.html) In fact, invalidation is very big hint to reclaimer. It means we don't use the page any more. So let's move the writing page into inactive list's head if we can't truncate it right now. Why I move page to head of lru on this patch, Dirty/Writeback page would be flushed sooner or later. It can prevent writeout of pageout which is less effective than flusher's writeout. Originally, I reused lru_demote of Peter with some change so added his Signed-off-by. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:52 +00:00
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
pvec = &per_cpu(lru_pvecs.lru_deactivate_file, cpu);
mm: deactivate invalidated pages Recently, there are reported problem about thrashing. (http://marc.info/?l=rsync&m=128885034930933&w=2) It happens by backup workloads(ex, nightly rsync). That's because the workload makes just use-once pages and touches pages twice. It promotes the page into active list so that it results in working set page eviction. Some app developer want to support POSIX_FADV_NOREUSE. But other OSes don't support it, either. (http://marc.info/?l=linux-mm&m=128928979512086&w=2) By other approach, app developers use POSIX_FADV_DONTNEED. But it has a problem. If kernel meets page is writing during invalidate_mapping_pages, it can't work. It makes for application programmer to use it since they always have to sync data before calling fadivse(..POSIX_FADV_DONTNEED) to make sure the pages could be discardable. At last, they can't use deferred write of kernel so that they could see performance loss. (http://insights.oetiker.ch/linux/fadvise.html) In fact, invalidation is very big hint to reclaimer. It means we don't use the page any more. So let's move the writing page into inactive list's head if we can't truncate it right now. Why I move page to head of lru on this patch, Dirty/Writeback page would be flushed sooner or later. It can prevent writeout of pageout which is less effective than flusher's writeout. Originally, I reused lru_demote of Peter with some change so added his Signed-off-by. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:52 +00:00
if (pagevec_count(pvec))
mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn Fold the PGROTATED event collection into pagevec_move_tail_fn call back func like other funcs does in pagevec_lru_move_fn. Thus we could save func call pagevec_move_tail(). Now all usage of pagevec_lru_move_fn are same and no needs of its 3rd parameter. It's just simply the calling. No functional change. [lkp@intel.com: found a build issue in the original patch, thanks] Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:56 +00:00
pagevec_lru_move_fn(pvec, lru_deactivate_file_fn);
mm: batch activate_page() to reduce lock contention The zone->lru_lock is heavily contented in workload where activate_page() is frequently used. We could do batch activate_page() to reduce the lock contention. The batched pages will be added into zone list when the pool is full or page reclaim is trying to drain them. For example, in a 4 socket 64 CPU system, create a sparse file and 64 processes, processes shared map to the file. Each process read access the whole file and then exit. The process exit will do unmap_vmas() and cause a lot of activate_page() call. In such workload, we saw about 58% total time reduction with below patch. Other workloads with a lot of activate_page also benefits a lot too. Andrew Morton suggested activate_page() and putback_lru_pages() should follow the same path to active pages, but this is hard to implement (see commit 7a608572a282a ("Revert "mm: batch activate_page() to reduce lock contention")). On the other hand, do we really need putback_lru_pages() to follow the same path? I tested several FIO/FFSB benchmark (about 20 scripts for each benchmark) in 3 machines here from 2 sockets to 4 sockets. My test doesn't show anything significant with/without below patch (there is slight difference but mostly some noise which we found even without below patch before). Below patch basically returns to the same as my first post. I tested some microbenchmarks: case-anon-cow-rand-mt 0.58% case-anon-cow-rand -3.30% case-anon-cow-seq-mt -0.51% case-anon-cow-seq -5.68% case-anon-r-rand-mt 0.23% case-anon-r-rand 0.81% case-anon-r-seq-mt -0.71% case-anon-r-seq -1.99% case-anon-rx-rand-mt 2.11% case-anon-rx-seq-mt 3.46% case-anon-w-rand-mt -0.03% case-anon-w-rand -0.50% case-anon-w-seq-mt -1.08% case-anon-w-seq -0.12% case-anon-wx-rand-mt -5.02% case-anon-wx-seq-mt -1.43% case-fork 1.65% case-fork-sleep -0.07% case-fork-withmem 1.39% case-hugetlb -0.59% case-lru-file-mmap-read-mt -0.54% case-lru-file-mmap-read 0.61% case-lru-file-mmap-read-rand -2.24% case-lru-file-readonce -0.64% case-lru-file-readtwice -11.69% case-lru-memcg -1.35% case-mmap-pread-rand-mt 1.88% case-mmap-pread-rand -15.26% case-mmap-pread-seq-mt 0.89% case-mmap-pread-seq -69.72% case-mmap-xread-rand-mt 0.71% case-mmap-xread-seq-mt 0.38% The most significent are: case-lru-file-readtwice -11.69% case-mmap-pread-rand -15.26% case-mmap-pread-seq -69.72% which use activate_page a lot. others are basically variations because each run has slightly difference. In UP case, 'size mm/swap.o' before the two patches: text data bss dec hex filename 6466 896 4 7366 1cc6 mm/swap.o after the two patches: text data bss dec hex filename 6343 896 4 7243 1c4b mm/swap.o Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:12:55 +00:00
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
pvec = &per_cpu(lru_pvecs.lru_deactivate, cpu);
mm: introduce MADV_COLD Patch series "Introduce MADV_COLD and MADV_PAGEOUT", v7. - Background The Android terminology used for forking a new process and starting an app from scratch is a cold start, while resuming an existing app is a hot start. While we continually try to improve the performance of cold starts, hot starts will always be significantly less power hungry as well as faster so we are trying to make hot start more likely than cold start. To increase hot start, Android userspace manages the order that apps should be killed in a process called ActivityManagerService. ActivityManagerService tracks every Android app or service that the user could be interacting with at any time and translates that into a ranked list for lmkd(low memory killer daemon). They are likely to be killed by lmkd if the system has to reclaim memory. In that sense they are similar to entries in any other cache. Those apps are kept alive for opportunistic performance improvements but those performance improvements will vary based on the memory requirements of individual workloads. - Problem Naturally, cached apps were dominant consumers of memory on the system. However, they were not significant consumers of swap even though they are good candidate for swap. Under investigation, swapping out only begins once the low zone watermark is hit and kswapd wakes up, but the overall allocation rate in the system might trip lmkd thresholds and cause a cached process to be killed(we measured performance swapping out vs. zapping the memory by killing a process. Unsurprisingly, zapping is 10x times faster even though we use zram which is much faster than real storage) so kill from lmkd will often satisfy the high zone watermark, resulting in very few pages actually being moved to swap. - Approach The approach we chose was to use a new interface to allow userspace to proactively reclaim entire processes by leveraging platform information. This allowed us to bypass the inaccuracy of the kernel’s LRUs for pages that are known to be cold from userspace and to avoid races with lmkd by reclaiming apps as soon as they entered the cached state. Additionally, it could provide many chances for platform to use much information to optimize memory efficiency. To achieve the goal, the patchset introduce two new options for madvise. One is MADV_COLD which will deactivate activated pages and the other is MADV_PAGEOUT which will reclaim private pages instantly. These new options complement MADV_DONTNEED and MADV_FREE by adding non-destructive ways to gain some free memory space. MADV_PAGEOUT is similar to MADV_DONTNEED in a way that it hints the kernel that memory region is not currently needed and should be reclaimed immediately; MADV_COLD is similar to MADV_FREE in a way that it hints the kernel that memory region is not currently needed and should be reclaimed when memory pressure rises. This patch (of 5): When a process expects no accesses to a certain memory range, it could give a hint to kernel that the pages can be reclaimed when memory pressure happens but data should be preserved for future use. This could reduce workingset eviction so it ends up increasing performance. This patch introduces the new MADV_COLD hint to madvise(2) syscall. MADV_COLD can be used by a process to mark a memory range as not expected to be used in the near future. The hint can help kernel in deciding which pages to evict early during memory pressure. It works for every LRU pages like MADV_[DONTNEED|FREE]. IOW, It moves active file page -> inactive file LRU active anon page -> inacdtive anon LRU Unlike MADV_FREE, it doesn't move active anonymous pages to inactive file LRU's head because MADV_COLD is a little bit different symantic. MADV_FREE means it's okay to discard when the memory pressure because the content of the page is *garbage* so freeing such pages is almost zero overhead since we don't need to swap out and access afterward causes just minor fault. Thus, it would make sense to put those freeable pages in inactive file LRU to compete other used-once pages. It makes sense for implmentaion point of view, too because it's not swapbacked memory any longer until it would be re-dirtied. Even, it could give a bonus to make them be reclaimed on swapless system. However, MADV_COLD doesn't mean garbage so reclaiming them requires swap-out/in in the end so it's bigger cost. Since we have designed VM LRU aging based on cost-model, anonymous cold pages would be better to position inactive anon's LRU list, not file LRU. Furthermore, it would help to avoid unnecessary scanning if system doesn't have a swap device. Let's start simpler way without adding complexity at this moment. However, keep in mind, too that it's a caveat that workloads with a lot of pages cache are likely to ignore MADV_COLD on anonymous memory because we rarely age anonymous LRU lists. * man-page material MADV_COLD (since Linux x.x) Pages in the specified regions will be treated as less-recently-accessed compared to pages in the system with similar access frequencies. In contrast to MADV_FREE, the contents of the region are preserved regardless of subsequent writes to pages. MADV_COLD cannot be applied to locked pages, Huge TLB pages, or VM_PFNMAP pages. [akpm@linux-foundation.org: resolve conflicts with hmm.git] Link: http://lkml.kernel.org/r/20190726023435.214162-2-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Chris Zankel <chris@zankel.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25 23:49:08 +00:00
if (pagevec_count(pvec))
mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn Fold the PGROTATED event collection into pagevec_move_tail_fn call back func like other funcs does in pagevec_lru_move_fn. Thus we could save func call pagevec_move_tail(). Now all usage of pagevec_lru_move_fn are same and no needs of its 3rd parameter. It's just simply the calling. No functional change. [lkp@intel.com: found a build issue in the original patch, thanks] Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:56 +00:00
pagevec_lru_move_fn(pvec, lru_deactivate_fn);
mm: introduce MADV_COLD Patch series "Introduce MADV_COLD and MADV_PAGEOUT", v7. - Background The Android terminology used for forking a new process and starting an app from scratch is a cold start, while resuming an existing app is a hot start. While we continually try to improve the performance of cold starts, hot starts will always be significantly less power hungry as well as faster so we are trying to make hot start more likely than cold start. To increase hot start, Android userspace manages the order that apps should be killed in a process called ActivityManagerService. ActivityManagerService tracks every Android app or service that the user could be interacting with at any time and translates that into a ranked list for lmkd(low memory killer daemon). They are likely to be killed by lmkd if the system has to reclaim memory. In that sense they are similar to entries in any other cache. Those apps are kept alive for opportunistic performance improvements but those performance improvements will vary based on the memory requirements of individual workloads. - Problem Naturally, cached apps were dominant consumers of memory on the system. However, they were not significant consumers of swap even though they are good candidate for swap. Under investigation, swapping out only begins once the low zone watermark is hit and kswapd wakes up, but the overall allocation rate in the system might trip lmkd thresholds and cause a cached process to be killed(we measured performance swapping out vs. zapping the memory by killing a process. Unsurprisingly, zapping is 10x times faster even though we use zram which is much faster than real storage) so kill from lmkd will often satisfy the high zone watermark, resulting in very few pages actually being moved to swap. - Approach The approach we chose was to use a new interface to allow userspace to proactively reclaim entire processes by leveraging platform information. This allowed us to bypass the inaccuracy of the kernel’s LRUs for pages that are known to be cold from userspace and to avoid races with lmkd by reclaiming apps as soon as they entered the cached state. Additionally, it could provide many chances for platform to use much information to optimize memory efficiency. To achieve the goal, the patchset introduce two new options for madvise. One is MADV_COLD which will deactivate activated pages and the other is MADV_PAGEOUT which will reclaim private pages instantly. These new options complement MADV_DONTNEED and MADV_FREE by adding non-destructive ways to gain some free memory space. MADV_PAGEOUT is similar to MADV_DONTNEED in a way that it hints the kernel that memory region is not currently needed and should be reclaimed immediately; MADV_COLD is similar to MADV_FREE in a way that it hints the kernel that memory region is not currently needed and should be reclaimed when memory pressure rises. This patch (of 5): When a process expects no accesses to a certain memory range, it could give a hint to kernel that the pages can be reclaimed when memory pressure happens but data should be preserved for future use. This could reduce workingset eviction so it ends up increasing performance. This patch introduces the new MADV_COLD hint to madvise(2) syscall. MADV_COLD can be used by a process to mark a memory range as not expected to be used in the near future. The hint can help kernel in deciding which pages to evict early during memory pressure. It works for every LRU pages like MADV_[DONTNEED|FREE]. IOW, It moves active file page -> inactive file LRU active anon page -> inacdtive anon LRU Unlike MADV_FREE, it doesn't move active anonymous pages to inactive file LRU's head because MADV_COLD is a little bit different symantic. MADV_FREE means it's okay to discard when the memory pressure because the content of the page is *garbage* so freeing such pages is almost zero overhead since we don't need to swap out and access afterward causes just minor fault. Thus, it would make sense to put those freeable pages in inactive file LRU to compete other used-once pages. It makes sense for implmentaion point of view, too because it's not swapbacked memory any longer until it would be re-dirtied. Even, it could give a bonus to make them be reclaimed on swapless system. However, MADV_COLD doesn't mean garbage so reclaiming them requires swap-out/in in the end so it's bigger cost. Since we have designed VM LRU aging based on cost-model, anonymous cold pages would be better to position inactive anon's LRU list, not file LRU. Furthermore, it would help to avoid unnecessary scanning if system doesn't have a swap device. Let's start simpler way without adding complexity at this moment. However, keep in mind, too that it's a caveat that workloads with a lot of pages cache are likely to ignore MADV_COLD on anonymous memory because we rarely age anonymous LRU lists. * man-page material MADV_COLD (since Linux x.x) Pages in the specified regions will be treated as less-recently-accessed compared to pages in the system with similar access frequencies. In contrast to MADV_FREE, the contents of the region are preserved regardless of subsequent writes to pages. MADV_COLD cannot be applied to locked pages, Huge TLB pages, or VM_PFNMAP pages. [akpm@linux-foundation.org: resolve conflicts with hmm.git] Link: http://lkml.kernel.org/r/20190726023435.214162-2-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Chris Zankel <chris@zankel.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25 23:49:08 +00:00
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
pvec = &per_cpu(lru_pvecs.lru_lazyfree, cpu);
mm: move lazily freed pages to inactive list MADV_FREE is a hint that it's okay to discard pages if there is memory pressure and we use reclaimers(ie, kswapd and direct reclaim) to free them so there is no value keeping them in the active anonymous LRU so this patch moves them to inactive LRU list's head. This means that MADV_FREE-ed pages which were living on the inactive list are reclaimed first because they are more likely to be cold rather than recently active pages. An arguable issue for the approach would be whether we should put the page to the head or tail of the inactive list. I chose head because the kernel cannot make sure it's really cold or warm for every MADV_FREE usecase but at least we know it's not *hot*, so landing of inactive head would be a comprimise for various usecases. This fixes suboptimal behavior of MADV_FREE when pages living on the active list will sit there for a long time even under memory pressure while the inactive list is reclaimed heavily. This basically breaks the whole purpose of using MADV_FREE to help the system to free memory which is might not be used. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:55:11 +00:00
if (pagevec_count(pvec))
mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn Fold the PGROTATED event collection into pagevec_move_tail_fn call back func like other funcs does in pagevec_lru_move_fn. Thus we could save func call pagevec_move_tail(). Now all usage of pagevec_lru_move_fn are same and no needs of its 3rd parameter. It's just simply the calling. No functional change. [lkp@intel.com: found a build issue in the original patch, thanks] Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:56 +00:00
pagevec_lru_move_fn(pvec, lru_lazyfree_fn);
mm: move lazily freed pages to inactive list MADV_FREE is a hint that it's okay to discard pages if there is memory pressure and we use reclaimers(ie, kswapd and direct reclaim) to free them so there is no value keeping them in the active anonymous LRU so this patch moves them to inactive LRU list's head. This means that MADV_FREE-ed pages which were living on the inactive list are reclaimed first because they are more likely to be cold rather than recently active pages. An arguable issue for the approach would be whether we should put the page to the head or tail of the inactive list. I chose head because the kernel cannot make sure it's really cold or warm for every MADV_FREE usecase but at least we know it's not *hot*, so landing of inactive head would be a comprimise for various usecases. This fixes suboptimal behavior of MADV_FREE when pages living on the active list will sit there for a long time even under memory pressure while the inactive list is reclaimed heavily. This basically breaks the whole purpose of using MADV_FREE to help the system to free memory which is might not be used. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:55:11 +00:00
mm: batch activate_page() to reduce lock contention The zone->lru_lock is heavily contented in workload where activate_page() is frequently used. We could do batch activate_page() to reduce the lock contention. The batched pages will be added into zone list when the pool is full or page reclaim is trying to drain them. For example, in a 4 socket 64 CPU system, create a sparse file and 64 processes, processes shared map to the file. Each process read access the whole file and then exit. The process exit will do unmap_vmas() and cause a lot of activate_page() call. In such workload, we saw about 58% total time reduction with below patch. Other workloads with a lot of activate_page also benefits a lot too. Andrew Morton suggested activate_page() and putback_lru_pages() should follow the same path to active pages, but this is hard to implement (see commit 7a608572a282a ("Revert "mm: batch activate_page() to reduce lock contention")). On the other hand, do we really need putback_lru_pages() to follow the same path? I tested several FIO/FFSB benchmark (about 20 scripts for each benchmark) in 3 machines here from 2 sockets to 4 sockets. My test doesn't show anything significant with/without below patch (there is slight difference but mostly some noise which we found even without below patch before). Below patch basically returns to the same as my first post. I tested some microbenchmarks: case-anon-cow-rand-mt 0.58% case-anon-cow-rand -3.30% case-anon-cow-seq-mt -0.51% case-anon-cow-seq -5.68% case-anon-r-rand-mt 0.23% case-anon-r-rand 0.81% case-anon-r-seq-mt -0.71% case-anon-r-seq -1.99% case-anon-rx-rand-mt 2.11% case-anon-rx-seq-mt 3.46% case-anon-w-rand-mt -0.03% case-anon-w-rand -0.50% case-anon-w-seq-mt -1.08% case-anon-w-seq -0.12% case-anon-wx-rand-mt -5.02% case-anon-wx-seq-mt -1.43% case-fork 1.65% case-fork-sleep -0.07% case-fork-withmem 1.39% case-hugetlb -0.59% case-lru-file-mmap-read-mt -0.54% case-lru-file-mmap-read 0.61% case-lru-file-mmap-read-rand -2.24% case-lru-file-readonce -0.64% case-lru-file-readtwice -11.69% case-lru-memcg -1.35% case-mmap-pread-rand-mt 1.88% case-mmap-pread-rand -15.26% case-mmap-pread-seq-mt 0.89% case-mmap-pread-seq -69.72% case-mmap-xread-rand-mt 0.71% case-mmap-xread-seq-mt 0.38% The most significent are: case-lru-file-readtwice -11.69% case-mmap-pread-rand -15.26% case-mmap-pread-seq -69.72% which use activate_page a lot. others are basically variations because each run has slightly difference. In UP case, 'size mm/swap.o' before the two patches: text data bss dec hex filename 6466 896 4 7366 1cc6 mm/swap.o after the two patches: text data bss dec hex filename 6343 896 4 7243 1c4b mm/swap.o Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:12:55 +00:00
activate_page_drain(cpu);
mm: deactivate invalidated pages Recently, there are reported problem about thrashing. (http://marc.info/?l=rsync&m=128885034930933&w=2) It happens by backup workloads(ex, nightly rsync). That's because the workload makes just use-once pages and touches pages twice. It promotes the page into active list so that it results in working set page eviction. Some app developer want to support POSIX_FADV_NOREUSE. But other OSes don't support it, either. (http://marc.info/?l=linux-mm&m=128928979512086&w=2) By other approach, app developers use POSIX_FADV_DONTNEED. But it has a problem. If kernel meets page is writing during invalidate_mapping_pages, it can't work. It makes for application programmer to use it since they always have to sync data before calling fadivse(..POSIX_FADV_DONTNEED) to make sure the pages could be discardable. At last, they can't use deferred write of kernel so that they could see performance loss. (http://insights.oetiker.ch/linux/fadvise.html) In fact, invalidation is very big hint to reclaimer. It means we don't use the page any more. So let's move the writing page into inactive list's head if we can't truncate it right now. Why I move page to head of lru on this patch, Dirty/Writeback page would be flushed sooner or later. It can prevent writeout of pageout which is less effective than flusher's writeout. Originally, I reused lru_demote of Peter with some change so added his Signed-off-by. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:52 +00:00
}
/**
* deactivate_file_folio() - Forcefully deactivate a file folio.
* @folio: Folio to deactivate.
mm: deactivate invalidated pages Recently, there are reported problem about thrashing. (http://marc.info/?l=rsync&m=128885034930933&w=2) It happens by backup workloads(ex, nightly rsync). That's because the workload makes just use-once pages and touches pages twice. It promotes the page into active list so that it results in working set page eviction. Some app developer want to support POSIX_FADV_NOREUSE. But other OSes don't support it, either. (http://marc.info/?l=linux-mm&m=128928979512086&w=2) By other approach, app developers use POSIX_FADV_DONTNEED. But it has a problem. If kernel meets page is writing during invalidate_mapping_pages, it can't work. It makes for application programmer to use it since they always have to sync data before calling fadivse(..POSIX_FADV_DONTNEED) to make sure the pages could be discardable. At last, they can't use deferred write of kernel so that they could see performance loss. (http://insights.oetiker.ch/linux/fadvise.html) In fact, invalidation is very big hint to reclaimer. It means we don't use the page any more. So let's move the writing page into inactive list's head if we can't truncate it right now. Why I move page to head of lru on this patch, Dirty/Writeback page would be flushed sooner or later. It can prevent writeout of pageout which is less effective than flusher's writeout. Originally, I reused lru_demote of Peter with some change so added his Signed-off-by. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:52 +00:00
*
* This function hints to the VM that @folio is a good reclaim candidate,
* for example if its invalidation fails due to the folio being dirty
mm: deactivate invalidated pages Recently, there are reported problem about thrashing. (http://marc.info/?l=rsync&m=128885034930933&w=2) It happens by backup workloads(ex, nightly rsync). That's because the workload makes just use-once pages and touches pages twice. It promotes the page into active list so that it results in working set page eviction. Some app developer want to support POSIX_FADV_NOREUSE. But other OSes don't support it, either. (http://marc.info/?l=linux-mm&m=128928979512086&w=2) By other approach, app developers use POSIX_FADV_DONTNEED. But it has a problem. If kernel meets page is writing during invalidate_mapping_pages, it can't work. It makes for application programmer to use it since they always have to sync data before calling fadivse(..POSIX_FADV_DONTNEED) to make sure the pages could be discardable. At last, they can't use deferred write of kernel so that they could see performance loss. (http://insights.oetiker.ch/linux/fadvise.html) In fact, invalidation is very big hint to reclaimer. It means we don't use the page any more. So let's move the writing page into inactive list's head if we can't truncate it right now. Why I move page to head of lru on this patch, Dirty/Writeback page would be flushed sooner or later. It can prevent writeout of pageout which is less effective than flusher's writeout. Originally, I reused lru_demote of Peter with some change so added his Signed-off-by. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:52 +00:00
* or under writeback.
*
* Context: Caller holds a reference on the page.
mm: deactivate invalidated pages Recently, there are reported problem about thrashing. (http://marc.info/?l=rsync&m=128885034930933&w=2) It happens by backup workloads(ex, nightly rsync). That's because the workload makes just use-once pages and touches pages twice. It promotes the page into active list so that it results in working set page eviction. Some app developer want to support POSIX_FADV_NOREUSE. But other OSes don't support it, either. (http://marc.info/?l=linux-mm&m=128928979512086&w=2) By other approach, app developers use POSIX_FADV_DONTNEED. But it has a problem. If kernel meets page is writing during invalidate_mapping_pages, it can't work. It makes for application programmer to use it since they always have to sync data before calling fadivse(..POSIX_FADV_DONTNEED) to make sure the pages could be discardable. At last, they can't use deferred write of kernel so that they could see performance loss. (http://insights.oetiker.ch/linux/fadvise.html) In fact, invalidation is very big hint to reclaimer. It means we don't use the page any more. So let's move the writing page into inactive list's head if we can't truncate it right now. Why I move page to head of lru on this patch, Dirty/Writeback page would be flushed sooner or later. It can prevent writeout of pageout which is less effective than flusher's writeout. Originally, I reused lru_demote of Peter with some change so added his Signed-off-by. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:52 +00:00
*/
void deactivate_file_folio(struct folio *folio)
mm: deactivate invalidated pages Recently, there are reported problem about thrashing. (http://marc.info/?l=rsync&m=128885034930933&w=2) It happens by backup workloads(ex, nightly rsync). That's because the workload makes just use-once pages and touches pages twice. It promotes the page into active list so that it results in working set page eviction. Some app developer want to support POSIX_FADV_NOREUSE. But other OSes don't support it, either. (http://marc.info/?l=linux-mm&m=128928979512086&w=2) By other approach, app developers use POSIX_FADV_DONTNEED. But it has a problem. If kernel meets page is writing during invalidate_mapping_pages, it can't work. It makes for application programmer to use it since they always have to sync data before calling fadivse(..POSIX_FADV_DONTNEED) to make sure the pages could be discardable. At last, they can't use deferred write of kernel so that they could see performance loss. (http://insights.oetiker.ch/linux/fadvise.html) In fact, invalidation is very big hint to reclaimer. It means we don't use the page any more. So let's move the writing page into inactive list's head if we can't truncate it right now. Why I move page to head of lru on this patch, Dirty/Writeback page would be flushed sooner or later. It can prevent writeout of pageout which is less effective than flusher's writeout. Originally, I reused lru_demote of Peter with some change so added his Signed-off-by. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:52 +00:00
{
struct pagevec *pvec;
/*
* In a workload with many unevictable pages such as mprotect,
* unevictable folio deactivation for accelerating reclaim is pointless.
*/
if (folio_test_unevictable(folio))
return;
folio_get(folio);
local_lock(&lru_pvecs.lock);
pvec = this_cpu_ptr(&lru_pvecs.lru_deactivate_file);
mm: deactivate invalidated pages Recently, there are reported problem about thrashing. (http://marc.info/?l=rsync&m=128885034930933&w=2) It happens by backup workloads(ex, nightly rsync). That's because the workload makes just use-once pages and touches pages twice. It promotes the page into active list so that it results in working set page eviction. Some app developer want to support POSIX_FADV_NOREUSE. But other OSes don't support it, either. (http://marc.info/?l=linux-mm&m=128928979512086&w=2) By other approach, app developers use POSIX_FADV_DONTNEED. But it has a problem. If kernel meets page is writing during invalidate_mapping_pages, it can't work. It makes for application programmer to use it since they always have to sync data before calling fadivse(..POSIX_FADV_DONTNEED) to make sure the pages could be discardable. At last, they can't use deferred write of kernel so that they could see performance loss. (http://insights.oetiker.ch/linux/fadvise.html) In fact, invalidation is very big hint to reclaimer. It means we don't use the page any more. So let's move the writing page into inactive list's head if we can't truncate it right now. Why I move page to head of lru on this patch, Dirty/Writeback page would be flushed sooner or later. It can prevent writeout of pageout which is less effective than flusher's writeout. Originally, I reused lru_demote of Peter with some change so added his Signed-off-by. Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 23:32:52 +00:00
if (pagevec_add_and_need_flush(pvec, &folio->page))
pagevec_lru_move_fn(pvec, lru_deactivate_file_fn);
local_unlock(&lru_pvecs.lock);
}
mm: introduce MADV_COLD Patch series "Introduce MADV_COLD and MADV_PAGEOUT", v7. - Background The Android terminology used for forking a new process and starting an app from scratch is a cold start, while resuming an existing app is a hot start. While we continually try to improve the performance of cold starts, hot starts will always be significantly less power hungry as well as faster so we are trying to make hot start more likely than cold start. To increase hot start, Android userspace manages the order that apps should be killed in a process called ActivityManagerService. ActivityManagerService tracks every Android app or service that the user could be interacting with at any time and translates that into a ranked list for lmkd(low memory killer daemon). They are likely to be killed by lmkd if the system has to reclaim memory. In that sense they are similar to entries in any other cache. Those apps are kept alive for opportunistic performance improvements but those performance improvements will vary based on the memory requirements of individual workloads. - Problem Naturally, cached apps were dominant consumers of memory on the system. However, they were not significant consumers of swap even though they are good candidate for swap. Under investigation, swapping out only begins once the low zone watermark is hit and kswapd wakes up, but the overall allocation rate in the system might trip lmkd thresholds and cause a cached process to be killed(we measured performance swapping out vs. zapping the memory by killing a process. Unsurprisingly, zapping is 10x times faster even though we use zram which is much faster than real storage) so kill from lmkd will often satisfy the high zone watermark, resulting in very few pages actually being moved to swap. - Approach The approach we chose was to use a new interface to allow userspace to proactively reclaim entire processes by leveraging platform information. This allowed us to bypass the inaccuracy of the kernel’s LRUs for pages that are known to be cold from userspace and to avoid races with lmkd by reclaiming apps as soon as they entered the cached state. Additionally, it could provide many chances for platform to use much information to optimize memory efficiency. To achieve the goal, the patchset introduce two new options for madvise. One is MADV_COLD which will deactivate activated pages and the other is MADV_PAGEOUT which will reclaim private pages instantly. These new options complement MADV_DONTNEED and MADV_FREE by adding non-destructive ways to gain some free memory space. MADV_PAGEOUT is similar to MADV_DONTNEED in a way that it hints the kernel that memory region is not currently needed and should be reclaimed immediately; MADV_COLD is similar to MADV_FREE in a way that it hints the kernel that memory region is not currently needed and should be reclaimed when memory pressure rises. This patch (of 5): When a process expects no accesses to a certain memory range, it could give a hint to kernel that the pages can be reclaimed when memory pressure happens but data should be preserved for future use. This could reduce workingset eviction so it ends up increasing performance. This patch introduces the new MADV_COLD hint to madvise(2) syscall. MADV_COLD can be used by a process to mark a memory range as not expected to be used in the near future. The hint can help kernel in deciding which pages to evict early during memory pressure. It works for every LRU pages like MADV_[DONTNEED|FREE]. IOW, It moves active file page -> inactive file LRU active anon page -> inacdtive anon LRU Unlike MADV_FREE, it doesn't move active anonymous pages to inactive file LRU's head because MADV_COLD is a little bit different symantic. MADV_FREE means it's okay to discard when the memory pressure because the content of the page is *garbage* so freeing such pages is almost zero overhead since we don't need to swap out and access afterward causes just minor fault. Thus, it would make sense to put those freeable pages in inactive file LRU to compete other used-once pages. It makes sense for implmentaion point of view, too because it's not swapbacked memory any longer until it would be re-dirtied. Even, it could give a bonus to make them be reclaimed on swapless system. However, MADV_COLD doesn't mean garbage so reclaiming them requires swap-out/in in the end so it's bigger cost. Since we have designed VM LRU aging based on cost-model, anonymous cold pages would be better to position inactive anon's LRU list, not file LRU. Furthermore, it would help to avoid unnecessary scanning if system doesn't have a swap device. Let's start simpler way without adding complexity at this moment. However, keep in mind, too that it's a caveat that workloads with a lot of pages cache are likely to ignore MADV_COLD on anonymous memory because we rarely age anonymous LRU lists. * man-page material MADV_COLD (since Linux x.x) Pages in the specified regions will be treated as less-recently-accessed compared to pages in the system with similar access frequencies. In contrast to MADV_FREE, the contents of the region are preserved regardless of subsequent writes to pages. MADV_COLD cannot be applied to locked pages, Huge TLB pages, or VM_PFNMAP pages. [akpm@linux-foundation.org: resolve conflicts with hmm.git] Link: http://lkml.kernel.org/r/20190726023435.214162-2-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Chris Zankel <chris@zankel.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25 23:49:08 +00:00
/*
* deactivate_page - deactivate a page
* @page: page to deactivate
*
* deactivate_page() moves @page to the inactive list if @page was on the active
* list and was not an unevictable page. This is done to accelerate the reclaim
* of @page.
*/
void deactivate_page(struct page *page)
{
if (PageLRU(page) && PageActive(page) && !PageUnevictable(page)) {
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
struct pagevec *pvec;
mm: introduce MADV_COLD Patch series "Introduce MADV_COLD and MADV_PAGEOUT", v7. - Background The Android terminology used for forking a new process and starting an app from scratch is a cold start, while resuming an existing app is a hot start. While we continually try to improve the performance of cold starts, hot starts will always be significantly less power hungry as well as faster so we are trying to make hot start more likely than cold start. To increase hot start, Android userspace manages the order that apps should be killed in a process called ActivityManagerService. ActivityManagerService tracks every Android app or service that the user could be interacting with at any time and translates that into a ranked list for lmkd(low memory killer daemon). They are likely to be killed by lmkd if the system has to reclaim memory. In that sense they are similar to entries in any other cache. Those apps are kept alive for opportunistic performance improvements but those performance improvements will vary based on the memory requirements of individual workloads. - Problem Naturally, cached apps were dominant consumers of memory on the system. However, they were not significant consumers of swap even though they are good candidate for swap. Under investigation, swapping out only begins once the low zone watermark is hit and kswapd wakes up, but the overall allocation rate in the system might trip lmkd thresholds and cause a cached process to be killed(we measured performance swapping out vs. zapping the memory by killing a process. Unsurprisingly, zapping is 10x times faster even though we use zram which is much faster than real storage) so kill from lmkd will often satisfy the high zone watermark, resulting in very few pages actually being moved to swap. - Approach The approach we chose was to use a new interface to allow userspace to proactively reclaim entire processes by leveraging platform information. This allowed us to bypass the inaccuracy of the kernel’s LRUs for pages that are known to be cold from userspace and to avoid races with lmkd by reclaiming apps as soon as they entered the cached state. Additionally, it could provide many chances for platform to use much information to optimize memory efficiency. To achieve the goal, the patchset introduce two new options for madvise. One is MADV_COLD which will deactivate activated pages and the other is MADV_PAGEOUT which will reclaim private pages instantly. These new options complement MADV_DONTNEED and MADV_FREE by adding non-destructive ways to gain some free memory space. MADV_PAGEOUT is similar to MADV_DONTNEED in a way that it hints the kernel that memory region is not currently needed and should be reclaimed immediately; MADV_COLD is similar to MADV_FREE in a way that it hints the kernel that memory region is not currently needed and should be reclaimed when memory pressure rises. This patch (of 5): When a process expects no accesses to a certain memory range, it could give a hint to kernel that the pages can be reclaimed when memory pressure happens but data should be preserved for future use. This could reduce workingset eviction so it ends up increasing performance. This patch introduces the new MADV_COLD hint to madvise(2) syscall. MADV_COLD can be used by a process to mark a memory range as not expected to be used in the near future. The hint can help kernel in deciding which pages to evict early during memory pressure. It works for every LRU pages like MADV_[DONTNEED|FREE]. IOW, It moves active file page -> inactive file LRU active anon page -> inacdtive anon LRU Unlike MADV_FREE, it doesn't move active anonymous pages to inactive file LRU's head because MADV_COLD is a little bit different symantic. MADV_FREE means it's okay to discard when the memory pressure because the content of the page is *garbage* so freeing such pages is almost zero overhead since we don't need to swap out and access afterward causes just minor fault. Thus, it would make sense to put those freeable pages in inactive file LRU to compete other used-once pages. It makes sense for implmentaion point of view, too because it's not swapbacked memory any longer until it would be re-dirtied. Even, it could give a bonus to make them be reclaimed on swapless system. However, MADV_COLD doesn't mean garbage so reclaiming them requires swap-out/in in the end so it's bigger cost. Since we have designed VM LRU aging based on cost-model, anonymous cold pages would be better to position inactive anon's LRU list, not file LRU. Furthermore, it would help to avoid unnecessary scanning if system doesn't have a swap device. Let's start simpler way without adding complexity at this moment. However, keep in mind, too that it's a caveat that workloads with a lot of pages cache are likely to ignore MADV_COLD on anonymous memory because we rarely age anonymous LRU lists. * man-page material MADV_COLD (since Linux x.x) Pages in the specified regions will be treated as less-recently-accessed compared to pages in the system with similar access frequencies. In contrast to MADV_FREE, the contents of the region are preserved regardless of subsequent writes to pages. MADV_COLD cannot be applied to locked pages, Huge TLB pages, or VM_PFNMAP pages. [akpm@linux-foundation.org: resolve conflicts with hmm.git] Link: http://lkml.kernel.org/r/20190726023435.214162-2-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Chris Zankel <chris@zankel.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25 23:49:08 +00:00
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
local_lock(&lru_pvecs.lock);
pvec = this_cpu_ptr(&lru_pvecs.lru_deactivate);
mm: introduce MADV_COLD Patch series "Introduce MADV_COLD and MADV_PAGEOUT", v7. - Background The Android terminology used for forking a new process and starting an app from scratch is a cold start, while resuming an existing app is a hot start. While we continually try to improve the performance of cold starts, hot starts will always be significantly less power hungry as well as faster so we are trying to make hot start more likely than cold start. To increase hot start, Android userspace manages the order that apps should be killed in a process called ActivityManagerService. ActivityManagerService tracks every Android app or service that the user could be interacting with at any time and translates that into a ranked list for lmkd(low memory killer daemon). They are likely to be killed by lmkd if the system has to reclaim memory. In that sense they are similar to entries in any other cache. Those apps are kept alive for opportunistic performance improvements but those performance improvements will vary based on the memory requirements of individual workloads. - Problem Naturally, cached apps were dominant consumers of memory on the system. However, they were not significant consumers of swap even though they are good candidate for swap. Under investigation, swapping out only begins once the low zone watermark is hit and kswapd wakes up, but the overall allocation rate in the system might trip lmkd thresholds and cause a cached process to be killed(we measured performance swapping out vs. zapping the memory by killing a process. Unsurprisingly, zapping is 10x times faster even though we use zram which is much faster than real storage) so kill from lmkd will often satisfy the high zone watermark, resulting in very few pages actually being moved to swap. - Approach The approach we chose was to use a new interface to allow userspace to proactively reclaim entire processes by leveraging platform information. This allowed us to bypass the inaccuracy of the kernel’s LRUs for pages that are known to be cold from userspace and to avoid races with lmkd by reclaiming apps as soon as they entered the cached state. Additionally, it could provide many chances for platform to use much information to optimize memory efficiency. To achieve the goal, the patchset introduce two new options for madvise. One is MADV_COLD which will deactivate activated pages and the other is MADV_PAGEOUT which will reclaim private pages instantly. These new options complement MADV_DONTNEED and MADV_FREE by adding non-destructive ways to gain some free memory space. MADV_PAGEOUT is similar to MADV_DONTNEED in a way that it hints the kernel that memory region is not currently needed and should be reclaimed immediately; MADV_COLD is similar to MADV_FREE in a way that it hints the kernel that memory region is not currently needed and should be reclaimed when memory pressure rises. This patch (of 5): When a process expects no accesses to a certain memory range, it could give a hint to kernel that the pages can be reclaimed when memory pressure happens but data should be preserved for future use. This could reduce workingset eviction so it ends up increasing performance. This patch introduces the new MADV_COLD hint to madvise(2) syscall. MADV_COLD can be used by a process to mark a memory range as not expected to be used in the near future. The hint can help kernel in deciding which pages to evict early during memory pressure. It works for every LRU pages like MADV_[DONTNEED|FREE]. IOW, It moves active file page -> inactive file LRU active anon page -> inacdtive anon LRU Unlike MADV_FREE, it doesn't move active anonymous pages to inactive file LRU's head because MADV_COLD is a little bit different symantic. MADV_FREE means it's okay to discard when the memory pressure because the content of the page is *garbage* so freeing such pages is almost zero overhead since we don't need to swap out and access afterward causes just minor fault. Thus, it would make sense to put those freeable pages in inactive file LRU to compete other used-once pages. It makes sense for implmentaion point of view, too because it's not swapbacked memory any longer until it would be re-dirtied. Even, it could give a bonus to make them be reclaimed on swapless system. However, MADV_COLD doesn't mean garbage so reclaiming them requires swap-out/in in the end so it's bigger cost. Since we have designed VM LRU aging based on cost-model, anonymous cold pages would be better to position inactive anon's LRU list, not file LRU. Furthermore, it would help to avoid unnecessary scanning if system doesn't have a swap device. Let's start simpler way without adding complexity at this moment. However, keep in mind, too that it's a caveat that workloads with a lot of pages cache are likely to ignore MADV_COLD on anonymous memory because we rarely age anonymous LRU lists. * man-page material MADV_COLD (since Linux x.x) Pages in the specified regions will be treated as less-recently-accessed compared to pages in the system with similar access frequencies. In contrast to MADV_FREE, the contents of the region are preserved regardless of subsequent writes to pages. MADV_COLD cannot be applied to locked pages, Huge TLB pages, or VM_PFNMAP pages. [akpm@linux-foundation.org: resolve conflicts with hmm.git] Link: http://lkml.kernel.org/r/20190726023435.214162-2-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Chris Zankel <chris@zankel.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25 23:49:08 +00:00
get_page(page);
mm: disable LRU pagevec during the migration temporarily LRU pagevec holds refcount of pages until the pagevec are drained. It could prevent migration since the refcount of the page is greater than the expection in migration logic. To mitigate the issue, callers of migrate_pages drains LRU pagevec via migrate_prep or lru_add_drain_all before migrate_pages call. However, it's not enough because pages coming into pagevec after the draining call still could stay at the pagevec so it could keep preventing page migration. Since some callers of migrate_pages have retrial logic with LRU draining, the page would migrate at next trail but it is still fragile in that it doesn't close the fundamental race between upcoming LRU pages into pagvec and migration so the migration failure could cause contiguous memory allocation failure in the end. To close the race, this patch disables lru caches(i.e, pagevec) during ongoing migration until migrate is done. Since it's really hard to reproduce, I measured how many times migrate_pages retried with force mode(it is about a fallback to a sync migration) with below debug code. int migrate_pages(struct list_head *from, new_page_t get_new_page, .. .. if (rc && reason == MR_CONTIG_RANGE && pass > 2) { printk(KERN_ERR, "pfn 0x%lx reason %d", page_to_pfn(page), rc); dump_page(page, "fail to migrate"); } The test was repeating android apps launching with cma allocation in background every five seconds. Total cma allocation count was about 500 during the testing. With this patch, the dump_page count was reduced from 400 to 30. The new interface is also useful for memory hotplug which currently drains lru pcp caches after each migration failure. This is rather suboptimal as it has to disrupt others running during the operation. With the new interface the operation happens only once. This is also in line with pcp allocator cache which are disabled for the offlining as well. Link: https://lkml.kernel.org/r/20210319175127.886124-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Chris Goldsworthy <cgoldswo@codeaurora.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Oliver Sang <oliver.sang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:36:54 +00:00
if (pagevec_add_and_need_flush(pvec, page))
mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn Fold the PGROTATED event collection into pagevec_move_tail_fn call back func like other funcs does in pagevec_lru_move_fn. Thus we could save func call pagevec_move_tail(). Now all usage of pagevec_lru_move_fn are same and no needs of its 3rd parameter. It's just simply the calling. No functional change. [lkp@intel.com: found a build issue in the original patch, thanks] Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:56 +00:00
pagevec_lru_move_fn(pvec, lru_deactivate_fn);
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
local_unlock(&lru_pvecs.lock);
mm: introduce MADV_COLD Patch series "Introduce MADV_COLD and MADV_PAGEOUT", v7. - Background The Android terminology used for forking a new process and starting an app from scratch is a cold start, while resuming an existing app is a hot start. While we continually try to improve the performance of cold starts, hot starts will always be significantly less power hungry as well as faster so we are trying to make hot start more likely than cold start. To increase hot start, Android userspace manages the order that apps should be killed in a process called ActivityManagerService. ActivityManagerService tracks every Android app or service that the user could be interacting with at any time and translates that into a ranked list for lmkd(low memory killer daemon). They are likely to be killed by lmkd if the system has to reclaim memory. In that sense they are similar to entries in any other cache. Those apps are kept alive for opportunistic performance improvements but those performance improvements will vary based on the memory requirements of individual workloads. - Problem Naturally, cached apps were dominant consumers of memory on the system. However, they were not significant consumers of swap even though they are good candidate for swap. Under investigation, swapping out only begins once the low zone watermark is hit and kswapd wakes up, but the overall allocation rate in the system might trip lmkd thresholds and cause a cached process to be killed(we measured performance swapping out vs. zapping the memory by killing a process. Unsurprisingly, zapping is 10x times faster even though we use zram which is much faster than real storage) so kill from lmkd will often satisfy the high zone watermark, resulting in very few pages actually being moved to swap. - Approach The approach we chose was to use a new interface to allow userspace to proactively reclaim entire processes by leveraging platform information. This allowed us to bypass the inaccuracy of the kernel’s LRUs for pages that are known to be cold from userspace and to avoid races with lmkd by reclaiming apps as soon as they entered the cached state. Additionally, it could provide many chances for platform to use much information to optimize memory efficiency. To achieve the goal, the patchset introduce two new options for madvise. One is MADV_COLD which will deactivate activated pages and the other is MADV_PAGEOUT which will reclaim private pages instantly. These new options complement MADV_DONTNEED and MADV_FREE by adding non-destructive ways to gain some free memory space. MADV_PAGEOUT is similar to MADV_DONTNEED in a way that it hints the kernel that memory region is not currently needed and should be reclaimed immediately; MADV_COLD is similar to MADV_FREE in a way that it hints the kernel that memory region is not currently needed and should be reclaimed when memory pressure rises. This patch (of 5): When a process expects no accesses to a certain memory range, it could give a hint to kernel that the pages can be reclaimed when memory pressure happens but data should be preserved for future use. This could reduce workingset eviction so it ends up increasing performance. This patch introduces the new MADV_COLD hint to madvise(2) syscall. MADV_COLD can be used by a process to mark a memory range as not expected to be used in the near future. The hint can help kernel in deciding which pages to evict early during memory pressure. It works for every LRU pages like MADV_[DONTNEED|FREE]. IOW, It moves active file page -> inactive file LRU active anon page -> inacdtive anon LRU Unlike MADV_FREE, it doesn't move active anonymous pages to inactive file LRU's head because MADV_COLD is a little bit different symantic. MADV_FREE means it's okay to discard when the memory pressure because the content of the page is *garbage* so freeing such pages is almost zero overhead since we don't need to swap out and access afterward causes just minor fault. Thus, it would make sense to put those freeable pages in inactive file LRU to compete other used-once pages. It makes sense for implmentaion point of view, too because it's not swapbacked memory any longer until it would be re-dirtied. Even, it could give a bonus to make them be reclaimed on swapless system. However, MADV_COLD doesn't mean garbage so reclaiming them requires swap-out/in in the end so it's bigger cost. Since we have designed VM LRU aging based on cost-model, anonymous cold pages would be better to position inactive anon's LRU list, not file LRU. Furthermore, it would help to avoid unnecessary scanning if system doesn't have a swap device. Let's start simpler way without adding complexity at this moment. However, keep in mind, too that it's a caveat that workloads with a lot of pages cache are likely to ignore MADV_COLD on anonymous memory because we rarely age anonymous LRU lists. * man-page material MADV_COLD (since Linux x.x) Pages in the specified regions will be treated as less-recently-accessed compared to pages in the system with similar access frequencies. In contrast to MADV_FREE, the contents of the region are preserved regardless of subsequent writes to pages. MADV_COLD cannot be applied to locked pages, Huge TLB pages, or VM_PFNMAP pages. [akpm@linux-foundation.org: resolve conflicts with hmm.git] Link: http://lkml.kernel.org/r/20190726023435.214162-2-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Chris Zankel <chris@zankel.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25 23:49:08 +00:00
}
}
mm: move lazily freed pages to inactive list MADV_FREE is a hint that it's okay to discard pages if there is memory pressure and we use reclaimers(ie, kswapd and direct reclaim) to free them so there is no value keeping them in the active anonymous LRU so this patch moves them to inactive LRU list's head. This means that MADV_FREE-ed pages which were living on the inactive list are reclaimed first because they are more likely to be cold rather than recently active pages. An arguable issue for the approach would be whether we should put the page to the head or tail of the inactive list. I chose head because the kernel cannot make sure it's really cold or warm for every MADV_FREE usecase but at least we know it's not *hot*, so landing of inactive head would be a comprimise for various usecases. This fixes suboptimal behavior of MADV_FREE when pages living on the active list will sit there for a long time even under memory pressure while the inactive list is reclaimed heavily. This basically breaks the whole purpose of using MADV_FREE to help the system to free memory which is might not be used. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:55:11 +00:00
/**
mm: move MADV_FREE pages into LRU_INACTIVE_FILE list madv()'s MADV_FREE indicate pages are 'lazyfree'. They are still anonymous pages, but they can be freed without pageout. To distinguish these from normal anonymous pages, we clear their SwapBacked flag. MADV_FREE pages could be freed without pageout, so they pretty much like used once file pages. For such pages, we'd like to reclaim them once there is memory pressure. Also it might be unfair reclaiming MADV_FREE pages always before used once file pages and we definitively want to reclaim the pages before other anonymous and file pages. To speed up MADV_FREE pages reclaim, we put the pages into LRU_INACTIVE_FILE list. The rationale is LRU_INACTIVE_FILE list is tiny nowadays and should be full of used once file pages. Reclaiming MADV_FREE pages will not have much interfere of anonymous and active file pages. And the inactive file pages and MADV_FREE pages will be reclaimed according to their age, so we don't reclaim too many MADV_FREE pages too. Putting the MADV_FREE pages into LRU_INACTIVE_FILE_LIST also means we can reclaim the pages without swap support. This idea is suggested by Johannes. This patch doesn't move MADV_FREE pages to LRU_INACTIVE_FILE list yet to avoid bisect failure, next patch will do it. The patch is based on Minchan's original patch. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/2f87063c1e9354677b7618c647abde77b07561e5.1487965799.git.shli@fb.com Signed-off-by: Shaohua Li <shli@fb.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 21:52:29 +00:00
* mark_page_lazyfree - make an anon page lazyfree
mm: move lazily freed pages to inactive list MADV_FREE is a hint that it's okay to discard pages if there is memory pressure and we use reclaimers(ie, kswapd and direct reclaim) to free them so there is no value keeping them in the active anonymous LRU so this patch moves them to inactive LRU list's head. This means that MADV_FREE-ed pages which were living on the inactive list are reclaimed first because they are more likely to be cold rather than recently active pages. An arguable issue for the approach would be whether we should put the page to the head or tail of the inactive list. I chose head because the kernel cannot make sure it's really cold or warm for every MADV_FREE usecase but at least we know it's not *hot*, so landing of inactive head would be a comprimise for various usecases. This fixes suboptimal behavior of MADV_FREE when pages living on the active list will sit there for a long time even under memory pressure while the inactive list is reclaimed heavily. This basically breaks the whole purpose of using MADV_FREE to help the system to free memory which is might not be used. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:55:11 +00:00
* @page: page to deactivate
*
mm: move MADV_FREE pages into LRU_INACTIVE_FILE list madv()'s MADV_FREE indicate pages are 'lazyfree'. They are still anonymous pages, but they can be freed without pageout. To distinguish these from normal anonymous pages, we clear their SwapBacked flag. MADV_FREE pages could be freed without pageout, so they pretty much like used once file pages. For such pages, we'd like to reclaim them once there is memory pressure. Also it might be unfair reclaiming MADV_FREE pages always before used once file pages and we definitively want to reclaim the pages before other anonymous and file pages. To speed up MADV_FREE pages reclaim, we put the pages into LRU_INACTIVE_FILE list. The rationale is LRU_INACTIVE_FILE list is tiny nowadays and should be full of used once file pages. Reclaiming MADV_FREE pages will not have much interfere of anonymous and active file pages. And the inactive file pages and MADV_FREE pages will be reclaimed according to their age, so we don't reclaim too many MADV_FREE pages too. Putting the MADV_FREE pages into LRU_INACTIVE_FILE_LIST also means we can reclaim the pages without swap support. This idea is suggested by Johannes. This patch doesn't move MADV_FREE pages to LRU_INACTIVE_FILE list yet to avoid bisect failure, next patch will do it. The patch is based on Minchan's original patch. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/2f87063c1e9354677b7618c647abde77b07561e5.1487965799.git.shli@fb.com Signed-off-by: Shaohua Li <shli@fb.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 21:52:29 +00:00
* mark_page_lazyfree() moves @page to the inactive file list.
* This is done to accelerate the reclaim of @page.
mm: move lazily freed pages to inactive list MADV_FREE is a hint that it's okay to discard pages if there is memory pressure and we use reclaimers(ie, kswapd and direct reclaim) to free them so there is no value keeping them in the active anonymous LRU so this patch moves them to inactive LRU list's head. This means that MADV_FREE-ed pages which were living on the inactive list are reclaimed first because they are more likely to be cold rather than recently active pages. An arguable issue for the approach would be whether we should put the page to the head or tail of the inactive list. I chose head because the kernel cannot make sure it's really cold or warm for every MADV_FREE usecase but at least we know it's not *hot*, so landing of inactive head would be a comprimise for various usecases. This fixes suboptimal behavior of MADV_FREE when pages living on the active list will sit there for a long time even under memory pressure while the inactive list is reclaimed heavily. This basically breaks the whole purpose of using MADV_FREE to help the system to free memory which is might not be used. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:55:11 +00:00
*/
mm: move MADV_FREE pages into LRU_INACTIVE_FILE list madv()'s MADV_FREE indicate pages are 'lazyfree'. They are still anonymous pages, but they can be freed without pageout. To distinguish these from normal anonymous pages, we clear their SwapBacked flag. MADV_FREE pages could be freed without pageout, so they pretty much like used once file pages. For such pages, we'd like to reclaim them once there is memory pressure. Also it might be unfair reclaiming MADV_FREE pages always before used once file pages and we definitively want to reclaim the pages before other anonymous and file pages. To speed up MADV_FREE pages reclaim, we put the pages into LRU_INACTIVE_FILE list. The rationale is LRU_INACTIVE_FILE list is tiny nowadays and should be full of used once file pages. Reclaiming MADV_FREE pages will not have much interfere of anonymous and active file pages. And the inactive file pages and MADV_FREE pages will be reclaimed according to their age, so we don't reclaim too many MADV_FREE pages too. Putting the MADV_FREE pages into LRU_INACTIVE_FILE_LIST also means we can reclaim the pages without swap support. This idea is suggested by Johannes. This patch doesn't move MADV_FREE pages to LRU_INACTIVE_FILE list yet to avoid bisect failure, next patch will do it. The patch is based on Minchan's original patch. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/2f87063c1e9354677b7618c647abde77b07561e5.1487965799.git.shli@fb.com Signed-off-by: Shaohua Li <shli@fb.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 21:52:29 +00:00
void mark_page_lazyfree(struct page *page)
mm: move lazily freed pages to inactive list MADV_FREE is a hint that it's okay to discard pages if there is memory pressure and we use reclaimers(ie, kswapd and direct reclaim) to free them so there is no value keeping them in the active anonymous LRU so this patch moves them to inactive LRU list's head. This means that MADV_FREE-ed pages which were living on the inactive list are reclaimed first because they are more likely to be cold rather than recently active pages. An arguable issue for the approach would be whether we should put the page to the head or tail of the inactive list. I chose head because the kernel cannot make sure it's really cold or warm for every MADV_FREE usecase but at least we know it's not *hot*, so landing of inactive head would be a comprimise for various usecases. This fixes suboptimal behavior of MADV_FREE when pages living on the active list will sit there for a long time even under memory pressure while the inactive list is reclaimed heavily. This basically breaks the whole purpose of using MADV_FREE to help the system to free memory which is might not be used. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:55:11 +00:00
{
mm: move MADV_FREE pages into LRU_INACTIVE_FILE list madv()'s MADV_FREE indicate pages are 'lazyfree'. They are still anonymous pages, but they can be freed without pageout. To distinguish these from normal anonymous pages, we clear their SwapBacked flag. MADV_FREE pages could be freed without pageout, so they pretty much like used once file pages. For such pages, we'd like to reclaim them once there is memory pressure. Also it might be unfair reclaiming MADV_FREE pages always before used once file pages and we definitively want to reclaim the pages before other anonymous and file pages. To speed up MADV_FREE pages reclaim, we put the pages into LRU_INACTIVE_FILE list. The rationale is LRU_INACTIVE_FILE list is tiny nowadays and should be full of used once file pages. Reclaiming MADV_FREE pages will not have much interfere of anonymous and active file pages. And the inactive file pages and MADV_FREE pages will be reclaimed according to their age, so we don't reclaim too many MADV_FREE pages too. Putting the MADV_FREE pages into LRU_INACTIVE_FILE_LIST also means we can reclaim the pages without swap support. This idea is suggested by Johannes. This patch doesn't move MADV_FREE pages to LRU_INACTIVE_FILE list yet to avoid bisect failure, next patch will do it. The patch is based on Minchan's original patch. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/2f87063c1e9354677b7618c647abde77b07561e5.1487965799.git.shli@fb.com Signed-off-by: Shaohua Li <shli@fb.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 21:52:29 +00:00
if (PageLRU(page) && PageAnon(page) && PageSwapBacked(page) &&
mm: avoid marking swap cached page as lazyfree MADV_FREE clears pte dirty bit and then marks the page lazyfree (clear SwapBacked). There is no lock to prevent the page is added to swap cache between these two steps by page reclaim. Page reclaim could add the page to swap cache and unmap the page. After page reclaim, the page is added back to lru. At that time, we probably start draining per-cpu pagevec and mark the page lazyfree. So the page could be in a state with SwapBacked cleared and PG_swapcache set. Next time there is a refault in the virtual address, do_swap_page can find the page from swap cache but the page has PageSwapCache false because SwapBacked isn't set, so do_swap_page will bail out and do nothing. The task will keep running into fault handler. Fixes: 802a3a92ad7a ("mm: reclaim MADV_FREE pages") Link: http://lkml.kernel.org/r/6537ef3814398c0073630b03f176263bc81f0902.1506446061.git.shli@fb.com Signed-off-by: Shaohua Li <shli@fb.com> Reported-by: Artem Savkov <asavkov@redhat.com> Tested-by: Artem Savkov <asavkov@redhat.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> [4.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03 23:15:29 +00:00
!PageSwapCache(page) && !PageUnevictable(page)) {
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
struct pagevec *pvec;
mm: move lazily freed pages to inactive list MADV_FREE is a hint that it's okay to discard pages if there is memory pressure and we use reclaimers(ie, kswapd and direct reclaim) to free them so there is no value keeping them in the active anonymous LRU so this patch moves them to inactive LRU list's head. This means that MADV_FREE-ed pages which were living on the inactive list are reclaimed first because they are more likely to be cold rather than recently active pages. An arguable issue for the approach would be whether we should put the page to the head or tail of the inactive list. I chose head because the kernel cannot make sure it's really cold or warm for every MADV_FREE usecase but at least we know it's not *hot*, so landing of inactive head would be a comprimise for various usecases. This fixes suboptimal behavior of MADV_FREE when pages living on the active list will sit there for a long time even under memory pressure while the inactive list is reclaimed heavily. This basically breaks the whole purpose of using MADV_FREE to help the system to free memory which is might not be used. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:55:11 +00:00
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
local_lock(&lru_pvecs.lock);
pvec = this_cpu_ptr(&lru_pvecs.lru_lazyfree);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
get_page(page);
mm: disable LRU pagevec during the migration temporarily LRU pagevec holds refcount of pages until the pagevec are drained. It could prevent migration since the refcount of the page is greater than the expection in migration logic. To mitigate the issue, callers of migrate_pages drains LRU pagevec via migrate_prep or lru_add_drain_all before migrate_pages call. However, it's not enough because pages coming into pagevec after the draining call still could stay at the pagevec so it could keep preventing page migration. Since some callers of migrate_pages have retrial logic with LRU draining, the page would migrate at next trail but it is still fragile in that it doesn't close the fundamental race between upcoming LRU pages into pagvec and migration so the migration failure could cause contiguous memory allocation failure in the end. To close the race, this patch disables lru caches(i.e, pagevec) during ongoing migration until migrate is done. Since it's really hard to reproduce, I measured how many times migrate_pages retried with force mode(it is about a fallback to a sync migration) with below debug code. int migrate_pages(struct list_head *from, new_page_t get_new_page, .. .. if (rc && reason == MR_CONTIG_RANGE && pass > 2) { printk(KERN_ERR, "pfn 0x%lx reason %d", page_to_pfn(page), rc); dump_page(page, "fail to migrate"); } The test was repeating android apps launching with cma allocation in background every five seconds. Total cma allocation count was about 500 during the testing. With this patch, the dump_page count was reduced from 400 to 30. The new interface is also useful for memory hotplug which currently drains lru pcp caches after each migration failure. This is rather suboptimal as it has to disrupt others running during the operation. With the new interface the operation happens only once. This is also in line with pcp allocator cache which are disabled for the offlining as well. Link: https://lkml.kernel.org/r/20210319175127.886124-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Chris Goldsworthy <cgoldswo@codeaurora.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Oliver Sang <oliver.sang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:36:54 +00:00
if (pagevec_add_and_need_flush(pvec, page))
mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn Fold the PGROTATED event collection into pagevec_move_tail_fn call back func like other funcs does in pagevec_lru_move_fn. Thus we could save func call pagevec_move_tail(). Now all usage of pagevec_lru_move_fn are same and no needs of its 3rd parameter. It's just simply the calling. No functional change. [lkp@intel.com: found a build issue in the original patch, thanks] Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:56 +00:00
pagevec_lru_move_fn(pvec, lru_lazyfree_fn);
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
local_unlock(&lru_pvecs.lock);
mm: move lazily freed pages to inactive list MADV_FREE is a hint that it's okay to discard pages if there is memory pressure and we use reclaimers(ie, kswapd and direct reclaim) to free them so there is no value keeping them in the active anonymous LRU so this patch moves them to inactive LRU list's head. This means that MADV_FREE-ed pages which were living on the inactive list are reclaimed first because they are more likely to be cold rather than recently active pages. An arguable issue for the approach would be whether we should put the page to the head or tail of the inactive list. I chose head because the kernel cannot make sure it's really cold or warm for every MADV_FREE usecase but at least we know it's not *hot*, so landing of inactive head would be a comprimise for various usecases. This fixes suboptimal behavior of MADV_FREE when pages living on the active list will sit there for a long time even under memory pressure while the inactive list is reclaimed heavily. This basically breaks the whole purpose of using MADV_FREE to help the system to free memory which is might not be used. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:55:11 +00:00
}
}
void lru_add_drain(void)
{
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
local_lock(&lru_pvecs.lock);
lru_add_drain_cpu(smp_processor_id());
local_unlock(&lru_pvecs.lock);
mlock_page_drain_local();
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
}
/*
* It's called from per-cpu workqueue context in SMP case so
* lru_add_drain_cpu and invalidate_bh_lrus_cpu should run on
* the same cpu. It shouldn't be a problem in !SMP case since
* the core is only one and the locks will disable preemption.
*/
static void lru_add_and_bh_lrus_drain(void)
{
local_lock(&lru_pvecs.lock);
lru_add_drain_cpu(smp_processor_id());
local_unlock(&lru_pvecs.lock);
invalidate_bh_lrus_cpu();
mlock_page_drain_local();
}
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
void lru_add_drain_cpu_zone(struct zone *zone)
{
local_lock(&lru_pvecs.lock);
lru_add_drain_cpu(smp_processor_id());
drain_local_pages(zone);
local_unlock(&lru_pvecs.lock);
mlock_page_drain_local();
}
#ifdef CONFIG_SMP
static DEFINE_PER_CPU(struct work_struct, lru_add_drain_work);
static void lru_add_drain_per_cpu(struct work_struct *dummy)
{
lru_add_and_bh_lrus_drain();
}
mm: drop hotplug lock from lru_add_drain_all() Pulling cpu hotplug locks inside the mm core function like lru_add_drain_all just asks for problems and the recent lockdep splat [1] just proves this. While the usage in that particular case might be wrong we should avoid the locking as lru_add_drain_all() is used in many places. It seems that this is not all that hard to achieve actually. We have done the same thing for drain_all_pages which is analogous by commit a459eeb7b852 ("mm, page_alloc: do not depend on cpu hotplug locks inside the allocator"). All we have to care about is to handle - the work item might be executed on a different cpu in worker from unbound pool so it doesn't run on pinned on the cpu - we have to make sure that we do not race with page_alloc_cpu_dead calling lru_add_drain_cpu the first part is already handled because the worker calls lru_add_drain which disables preemption when calling lru_add_drain_cpu on the local cpu it is draining. The later is true because page_alloc_cpu_dead is called on the controlling CPU after the hotplugged CPU vanished completely. [1] http://lkml.kernel.org/r/089e0825eec8955c1f055c83d476@google.com [add a cpu hotplug locking interaction as per tglx] Link: http://lkml.kernel.org/r/20171116120535.23765-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01 00:16:19 +00:00
/*
* Doesn't need any cpu hotplug locking because we do rely on per-cpu
* kworkers being shut down before our page_alloc_cpu_dead callback is
* executed on the offlined cpu.
* Calling this function with cpu hotplug locks held can actually lead
* to obscure indirect dependencies via WQ context.
*/
static inline void __lru_add_drain_all(bool force_all_cpus)
{
mm/swap: Do not abuse the seqcount_t latching API Commit eef1a429f234 ("mm/swap.c: piggyback lru_add_drain_all() calls") implemented an optimization mechanism to exit the to-be-started LRU drain operation (name it A) if another drain operation *started and finished* while (A) was blocked on the LRU draining mutex. This was done through a seqcount_t latch, which is an abuse of its semantics: 1. seqcount_t latching should be used for the purpose of switching between two storage places with sequence protection to allow interruptible, preemptible, writer sections. The referenced optimization mechanism has absolutely nothing to do with that. 2. The used raw_write_seqcount_latch() has two SMP write memory barriers to insure one consistent storage place out of the two storage places available. A full memory barrier is required instead: to guarantee that the pagevec counter stores visible by local CPU are visible to other CPUs -- before loading the current drain generation. Beside the seqcount_t API abuse, the semantics of a latch sequence counter was force-fitted into the referenced optimization. What was meant is to track "generations" of LRU draining operations, where "global lru draining generation = x" implies that all generations 0 < n <= x are already *scheduled* for draining -- thus nothing needs to be done if the current generation number n <= x. Remove the conceptually-inappropriate seqcount_t latch usage. Manually implement the referenced optimization using a counter and SMP memory barriers. Note, while at it, use the non-atomic variant of cpumask_set_cpu(), __cpumask_set_cpu(), due to the already existing mutex protection. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/87y2pg9erj.fsf@vostro.fn.ogness.net
2020-08-27 11:40:38 +00:00
/*
* lru_drain_gen - Global pages generation number
*
* (A) Definition: global lru_drain_gen = x implies that all generations
* 0 < n <= x are already *scheduled* for draining.
*
* This is an optimization for the highly-contended use case where a
* user space workload keeps constantly generating a flow of pages for
* each CPU.
*/
static unsigned int lru_drain_gen;
static struct cpumask has_work;
mm/swap: Do not abuse the seqcount_t latching API Commit eef1a429f234 ("mm/swap.c: piggyback lru_add_drain_all() calls") implemented an optimization mechanism to exit the to-be-started LRU drain operation (name it A) if another drain operation *started and finished* while (A) was blocked on the LRU draining mutex. This was done through a seqcount_t latch, which is an abuse of its semantics: 1. seqcount_t latching should be used for the purpose of switching between two storage places with sequence protection to allow interruptible, preemptible, writer sections. The referenced optimization mechanism has absolutely nothing to do with that. 2. The used raw_write_seqcount_latch() has two SMP write memory barriers to insure one consistent storage place out of the two storage places available. A full memory barrier is required instead: to guarantee that the pagevec counter stores visible by local CPU are visible to other CPUs -- before loading the current drain generation. Beside the seqcount_t API abuse, the semantics of a latch sequence counter was force-fitted into the referenced optimization. What was meant is to track "generations" of LRU draining operations, where "global lru draining generation = x" implies that all generations 0 < n <= x are already *scheduled* for draining -- thus nothing needs to be done if the current generation number n <= x. Remove the conceptually-inappropriate seqcount_t latch usage. Manually implement the referenced optimization using a counter and SMP memory barriers. Note, while at it, use the non-atomic variant of cpumask_set_cpu(), __cpumask_set_cpu(), due to the already existing mutex protection. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/87y2pg9erj.fsf@vostro.fn.ogness.net
2020-08-27 11:40:38 +00:00
static DEFINE_MUTEX(lock);
unsigned cpu, this_gen;
mm: move pcp and lru-pcp draining into single wq We currently have 2 specific WQ_RECLAIM workqueues in the mm code. vmstat_wq for updating pcp stats and lru_add_drain_wq dedicated to drain per cpu lru caches. This seems more than necessary because both can run on a single WQ. Both do not block on locks requiring a memory allocation nor perform any allocations themselves. We will save one rescuer thread this way. On the other hand drain_all_pages() queues work on the system wq which doesn't have rescuer and so this depend on memory allocation (when all workers are stuck allocating and new ones cannot be created). Initially we thought this would be more of a theoretical problem but Hugh Dickins has reported: : 4.11-rc has been giving me hangs after hours of swapping load. At : first they looked like memory leaks ("fork: Cannot allocate memory"); : but for no good reason I happened to do "cat /proc/sys/vm/stat_refresh" : before looking at /proc/meminfo one time, and the stat_refresh stuck : in D state, waiting for completion of flush_work like many kworkers. : kthreadd waiting for completion of flush_work in drain_all_pages(). This worker should be using WQ_RECLAIM as well in order to guarantee a forward progress. We can reuse the same one as for lru draining and vmstat. Link: http://lkml.kernel.org/r/20170307131751.24936-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Tested-by: Yang Li <pku.leo@gmail.com> Tested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-07 23:05:05 +00:00
/*
* Make sure nobody triggers this path before mm_percpu_wq is fully
* initialized.
*/
if (WARN_ON(!mm_percpu_wq))
return;
mm/swap: Do not abuse the seqcount_t latching API Commit eef1a429f234 ("mm/swap.c: piggyback lru_add_drain_all() calls") implemented an optimization mechanism to exit the to-be-started LRU drain operation (name it A) if another drain operation *started and finished* while (A) was blocked on the LRU draining mutex. This was done through a seqcount_t latch, which is an abuse of its semantics: 1. seqcount_t latching should be used for the purpose of switching between two storage places with sequence protection to allow interruptible, preemptible, writer sections. The referenced optimization mechanism has absolutely nothing to do with that. 2. The used raw_write_seqcount_latch() has two SMP write memory barriers to insure one consistent storage place out of the two storage places available. A full memory barrier is required instead: to guarantee that the pagevec counter stores visible by local CPU are visible to other CPUs -- before loading the current drain generation. Beside the seqcount_t API abuse, the semantics of a latch sequence counter was force-fitted into the referenced optimization. What was meant is to track "generations" of LRU draining operations, where "global lru draining generation = x" implies that all generations 0 < n <= x are already *scheduled* for draining -- thus nothing needs to be done if the current generation number n <= x. Remove the conceptually-inappropriate seqcount_t latch usage. Manually implement the referenced optimization using a counter and SMP memory barriers. Note, while at it, use the non-atomic variant of cpumask_set_cpu(), __cpumask_set_cpu(), due to the already existing mutex protection. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/87y2pg9erj.fsf@vostro.fn.ogness.net
2020-08-27 11:40:38 +00:00
/*
* Guarantee pagevec counter stores visible by this CPU are visible to
* other CPUs before loading the current drain generation.
*/
smp_mb();
/*
* (B) Locally cache global LRU draining generation number
*
* The read barrier ensures that the counter is loaded before the mutex
* is taken. It pairs with smp_mb() inside the mutex critical section
* at (D).
*/
this_gen = smp_load_acquire(&lru_drain_gen);
mm/swap.c: piggyback lru_add_drain_all() calls This is a very slow operation. Right now POSIX_FADV_DONTNEED is the top user because it has to freeze page references when removing it from the cache. invalidate_bdev() calls it for the same reason. Both are triggered from userspace, so it's easy to generate a storm. mlock/mlockall no longer calls lru_add_drain_all - I've seen here serious slowdown on older kernels. There are some less obvious paths in memory migration/CMA/offlining which shouldn't call frequently. The worst case requires a non-trivial workload because lru_add_drain_all() skips cpus where vectors are empty. Something must constantly generate a flow of pages for each cpu. Also cpus must be busy to make scheduling per-cpu works slower. And the machine must be big enough (64+ cpus in our case). In our case that was a massive series of mlock calls in map-reduce while other tasks write logs (and generates flows of new pages in per-cpu vectors). Mlock calls were serialized by mutex and accumulated latency up to 10 seconds or more. The kernel does not call lru_add_drain_all on mlock paths since 4.15, but the same scenario could be triggered by fadvise(POSIX_FADV_DONTNEED) or any other remaining user. There is no reason to do the drain again if somebody else already drained all the per-cpu vectors while we waited for the lock. Piggyback on a drain starting and finishing while we wait for the lock: all pages pending at the time of our entry were drained from the vectors. Callers like POSIX_FADV_DONTNEED retry their operations once after draining per-cpu vectors when pages have unexpected references. Link: http://lkml.kernel.org/r/157019456205.3142.3369423180908482020.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:40 +00:00
mutex_lock(&lock);
mm/swap.c: piggyback lru_add_drain_all() calls This is a very slow operation. Right now POSIX_FADV_DONTNEED is the top user because it has to freeze page references when removing it from the cache. invalidate_bdev() calls it for the same reason. Both are triggered from userspace, so it's easy to generate a storm. mlock/mlockall no longer calls lru_add_drain_all - I've seen here serious slowdown on older kernels. There are some less obvious paths in memory migration/CMA/offlining which shouldn't call frequently. The worst case requires a non-trivial workload because lru_add_drain_all() skips cpus where vectors are empty. Something must constantly generate a flow of pages for each cpu. Also cpus must be busy to make scheduling per-cpu works slower. And the machine must be big enough (64+ cpus in our case). In our case that was a massive series of mlock calls in map-reduce while other tasks write logs (and generates flows of new pages in per-cpu vectors). Mlock calls were serialized by mutex and accumulated latency up to 10 seconds or more. The kernel does not call lru_add_drain_all on mlock paths since 4.15, but the same scenario could be triggered by fadvise(POSIX_FADV_DONTNEED) or any other remaining user. There is no reason to do the drain again if somebody else already drained all the per-cpu vectors while we waited for the lock. Piggyback on a drain starting and finishing while we wait for the lock: all pages pending at the time of our entry were drained from the vectors. Callers like POSIX_FADV_DONTNEED retry their operations once after draining per-cpu vectors when pages have unexpected references. Link: http://lkml.kernel.org/r/157019456205.3142.3369423180908482020.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:40 +00:00
/*
mm/swap: Do not abuse the seqcount_t latching API Commit eef1a429f234 ("mm/swap.c: piggyback lru_add_drain_all() calls") implemented an optimization mechanism to exit the to-be-started LRU drain operation (name it A) if another drain operation *started and finished* while (A) was blocked on the LRU draining mutex. This was done through a seqcount_t latch, which is an abuse of its semantics: 1. seqcount_t latching should be used for the purpose of switching between two storage places with sequence protection to allow interruptible, preemptible, writer sections. The referenced optimization mechanism has absolutely nothing to do with that. 2. The used raw_write_seqcount_latch() has two SMP write memory barriers to insure one consistent storage place out of the two storage places available. A full memory barrier is required instead: to guarantee that the pagevec counter stores visible by local CPU are visible to other CPUs -- before loading the current drain generation. Beside the seqcount_t API abuse, the semantics of a latch sequence counter was force-fitted into the referenced optimization. What was meant is to track "generations" of LRU draining operations, where "global lru draining generation = x" implies that all generations 0 < n <= x are already *scheduled* for draining -- thus nothing needs to be done if the current generation number n <= x. Remove the conceptually-inappropriate seqcount_t latch usage. Manually implement the referenced optimization using a counter and SMP memory barriers. Note, while at it, use the non-atomic variant of cpumask_set_cpu(), __cpumask_set_cpu(), due to the already existing mutex protection. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/87y2pg9erj.fsf@vostro.fn.ogness.net
2020-08-27 11:40:38 +00:00
* (C) Exit the draining operation if a newer generation, from another
* lru_add_drain_all(), was already scheduled for draining. Check (A).
mm/swap.c: piggyback lru_add_drain_all() calls This is a very slow operation. Right now POSIX_FADV_DONTNEED is the top user because it has to freeze page references when removing it from the cache. invalidate_bdev() calls it for the same reason. Both are triggered from userspace, so it's easy to generate a storm. mlock/mlockall no longer calls lru_add_drain_all - I've seen here serious slowdown on older kernels. There are some less obvious paths in memory migration/CMA/offlining which shouldn't call frequently. The worst case requires a non-trivial workload because lru_add_drain_all() skips cpus where vectors are empty. Something must constantly generate a flow of pages for each cpu. Also cpus must be busy to make scheduling per-cpu works slower. And the machine must be big enough (64+ cpus in our case). In our case that was a massive series of mlock calls in map-reduce while other tasks write logs (and generates flows of new pages in per-cpu vectors). Mlock calls were serialized by mutex and accumulated latency up to 10 seconds or more. The kernel does not call lru_add_drain_all on mlock paths since 4.15, but the same scenario could be triggered by fadvise(POSIX_FADV_DONTNEED) or any other remaining user. There is no reason to do the drain again if somebody else already drained all the per-cpu vectors while we waited for the lock. Piggyback on a drain starting and finishing while we wait for the lock: all pages pending at the time of our entry were drained from the vectors. Callers like POSIX_FADV_DONTNEED retry their operations once after draining per-cpu vectors when pages have unexpected references. Link: http://lkml.kernel.org/r/157019456205.3142.3369423180908482020.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:40 +00:00
*/
mm: disable LRU pagevec during the migration temporarily LRU pagevec holds refcount of pages until the pagevec are drained. It could prevent migration since the refcount of the page is greater than the expection in migration logic. To mitigate the issue, callers of migrate_pages drains LRU pagevec via migrate_prep or lru_add_drain_all before migrate_pages call. However, it's not enough because pages coming into pagevec after the draining call still could stay at the pagevec so it could keep preventing page migration. Since some callers of migrate_pages have retrial logic with LRU draining, the page would migrate at next trail but it is still fragile in that it doesn't close the fundamental race between upcoming LRU pages into pagvec and migration so the migration failure could cause contiguous memory allocation failure in the end. To close the race, this patch disables lru caches(i.e, pagevec) during ongoing migration until migrate is done. Since it's really hard to reproduce, I measured how many times migrate_pages retried with force mode(it is about a fallback to a sync migration) with below debug code. int migrate_pages(struct list_head *from, new_page_t get_new_page, .. .. if (rc && reason == MR_CONTIG_RANGE && pass > 2) { printk(KERN_ERR, "pfn 0x%lx reason %d", page_to_pfn(page), rc); dump_page(page, "fail to migrate"); } The test was repeating android apps launching with cma allocation in background every five seconds. Total cma allocation count was about 500 during the testing. With this patch, the dump_page count was reduced from 400 to 30. The new interface is also useful for memory hotplug which currently drains lru pcp caches after each migration failure. This is rather suboptimal as it has to disrupt others running during the operation. With the new interface the operation happens only once. This is also in line with pcp allocator cache which are disabled for the offlining as well. Link: https://lkml.kernel.org/r/20210319175127.886124-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Chris Goldsworthy <cgoldswo@codeaurora.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Oliver Sang <oliver.sang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:36:54 +00:00
if (unlikely(this_gen != lru_drain_gen && !force_all_cpus))
mm/swap.c: piggyback lru_add_drain_all() calls This is a very slow operation. Right now POSIX_FADV_DONTNEED is the top user because it has to freeze page references when removing it from the cache. invalidate_bdev() calls it for the same reason. Both are triggered from userspace, so it's easy to generate a storm. mlock/mlockall no longer calls lru_add_drain_all - I've seen here serious slowdown on older kernels. There are some less obvious paths in memory migration/CMA/offlining which shouldn't call frequently. The worst case requires a non-trivial workload because lru_add_drain_all() skips cpus where vectors are empty. Something must constantly generate a flow of pages for each cpu. Also cpus must be busy to make scheduling per-cpu works slower. And the machine must be big enough (64+ cpus in our case). In our case that was a massive series of mlock calls in map-reduce while other tasks write logs (and generates flows of new pages in per-cpu vectors). Mlock calls were serialized by mutex and accumulated latency up to 10 seconds or more. The kernel does not call lru_add_drain_all on mlock paths since 4.15, but the same scenario could be triggered by fadvise(POSIX_FADV_DONTNEED) or any other remaining user. There is no reason to do the drain again if somebody else already drained all the per-cpu vectors while we waited for the lock. Piggyback on a drain starting and finishing while we wait for the lock: all pages pending at the time of our entry were drained from the vectors. Callers like POSIX_FADV_DONTNEED retry their operations once after draining per-cpu vectors when pages have unexpected references. Link: http://lkml.kernel.org/r/157019456205.3142.3369423180908482020.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:40 +00:00
goto done;
mm/swap: Do not abuse the seqcount_t latching API Commit eef1a429f234 ("mm/swap.c: piggyback lru_add_drain_all() calls") implemented an optimization mechanism to exit the to-be-started LRU drain operation (name it A) if another drain operation *started and finished* while (A) was blocked on the LRU draining mutex. This was done through a seqcount_t latch, which is an abuse of its semantics: 1. seqcount_t latching should be used for the purpose of switching between two storage places with sequence protection to allow interruptible, preemptible, writer sections. The referenced optimization mechanism has absolutely nothing to do with that. 2. The used raw_write_seqcount_latch() has two SMP write memory barriers to insure one consistent storage place out of the two storage places available. A full memory barrier is required instead: to guarantee that the pagevec counter stores visible by local CPU are visible to other CPUs -- before loading the current drain generation. Beside the seqcount_t API abuse, the semantics of a latch sequence counter was force-fitted into the referenced optimization. What was meant is to track "generations" of LRU draining operations, where "global lru draining generation = x" implies that all generations 0 < n <= x are already *scheduled* for draining -- thus nothing needs to be done if the current generation number n <= x. Remove the conceptually-inappropriate seqcount_t latch usage. Manually implement the referenced optimization using a counter and SMP memory barriers. Note, while at it, use the non-atomic variant of cpumask_set_cpu(), __cpumask_set_cpu(), due to the already existing mutex protection. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/87y2pg9erj.fsf@vostro.fn.ogness.net
2020-08-27 11:40:38 +00:00
/*
* (D) Increment global generation number
*
* Pairs with smp_load_acquire() at (B), outside of the critical
* section. Use a full memory barrier to guarantee that the new global
* drain generation number is stored before loading pagevec counters.
*
* This pairing must be done here, before the for_each_online_cpu loop
* below which drains the page vectors.
*
* Let x, y, and z represent some system CPU numbers, where x < y < z.
* Assume CPU #z is in the middle of the for_each_online_cpu loop
mm/swap: Do not abuse the seqcount_t latching API Commit eef1a429f234 ("mm/swap.c: piggyback lru_add_drain_all() calls") implemented an optimization mechanism to exit the to-be-started LRU drain operation (name it A) if another drain operation *started and finished* while (A) was blocked on the LRU draining mutex. This was done through a seqcount_t latch, which is an abuse of its semantics: 1. seqcount_t latching should be used for the purpose of switching between two storage places with sequence protection to allow interruptible, preemptible, writer sections. The referenced optimization mechanism has absolutely nothing to do with that. 2. The used raw_write_seqcount_latch() has two SMP write memory barriers to insure one consistent storage place out of the two storage places available. A full memory barrier is required instead: to guarantee that the pagevec counter stores visible by local CPU are visible to other CPUs -- before loading the current drain generation. Beside the seqcount_t API abuse, the semantics of a latch sequence counter was force-fitted into the referenced optimization. What was meant is to track "generations" of LRU draining operations, where "global lru draining generation = x" implies that all generations 0 < n <= x are already *scheduled* for draining -- thus nothing needs to be done if the current generation number n <= x. Remove the conceptually-inappropriate seqcount_t latch usage. Manually implement the referenced optimization using a counter and SMP memory barriers. Note, while at it, use the non-atomic variant of cpumask_set_cpu(), __cpumask_set_cpu(), due to the already existing mutex protection. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/87y2pg9erj.fsf@vostro.fn.ogness.net
2020-08-27 11:40:38 +00:00
* below and has already reached CPU #y's per-cpu data. CPU #x comes
* along, adds some pages to its per-cpu vectors, then calls
* lru_add_drain_all().
*
* If the paired barrier is done at any later step, e.g. after the
* loop, CPU #x will just exit at (C) and miss flushing out all of its
* added pages.
*/
WRITE_ONCE(lru_drain_gen, lru_drain_gen + 1);
smp_mb();
mm/swap.c: piggyback lru_add_drain_all() calls This is a very slow operation. Right now POSIX_FADV_DONTNEED is the top user because it has to freeze page references when removing it from the cache. invalidate_bdev() calls it for the same reason. Both are triggered from userspace, so it's easy to generate a storm. mlock/mlockall no longer calls lru_add_drain_all - I've seen here serious slowdown on older kernels. There are some less obvious paths in memory migration/CMA/offlining which shouldn't call frequently. The worst case requires a non-trivial workload because lru_add_drain_all() skips cpus where vectors are empty. Something must constantly generate a flow of pages for each cpu. Also cpus must be busy to make scheduling per-cpu works slower. And the machine must be big enough (64+ cpus in our case). In our case that was a massive series of mlock calls in map-reduce while other tasks write logs (and generates flows of new pages in per-cpu vectors). Mlock calls were serialized by mutex and accumulated latency up to 10 seconds or more. The kernel does not call lru_add_drain_all on mlock paths since 4.15, but the same scenario could be triggered by fadvise(POSIX_FADV_DONTNEED) or any other remaining user. There is no reason to do the drain again if somebody else already drained all the per-cpu vectors while we waited for the lock. Piggyback on a drain starting and finishing while we wait for the lock: all pages pending at the time of our entry were drained from the vectors. Callers like POSIX_FADV_DONTNEED retry their operations once after draining per-cpu vectors when pages have unexpected references. Link: http://lkml.kernel.org/r/157019456205.3142.3369423180908482020.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:40 +00:00
cpumask_clear(&has_work);
for_each_online_cpu(cpu) {
struct work_struct *work = &per_cpu(lru_add_drain_work, cpu);
mm: lru_cache_disable: replace work queue synchronization with synchronize_rcu On systems that run FIFO:1 applications that busy loop, any SCHED_OTHER task that attempts to execute on such a CPU (such as work threads) will not be scheduled, which leads to system hangs. Commit d479960e44f27e0e5 ("mm: disable LRU pagevec during the migration temporarily") relies on queueing work items on all online CPUs to ensure visibility of lru_disable_count. To fix this, replace the usage of work items with synchronize_rcu, which provides the same guarantees. Readers of lru_disable_count are protected by either disabling preemption or rcu_read_lock: preempt_disable, local_irq_disable [bh_lru_lock()] rcu_read_lock [rt_spin_lock CONFIG_PREEMPT_RT] preempt_disable [local_lock !CONFIG_PREEMPT_RT] Since v5.1 kernel, synchronize_rcu() is guaranteed to wait on preempt_disable() regions of code. So any CPU which sees lru_disable_count = 0 will have exited the critical section when synchronize_rcu() returns. Link: https://lkml.kernel.org/r/Yin7hDxdt0s/x+fp@fuller.cnet Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:45:47 +00:00
if (pagevec_count(&per_cpu(lru_pvecs.lru_add, cpu)) ||
mm/swap.c: annotate data races for lru_rotate_pvecs Read to lru_add_pvec->nr could be interrupted and then write to the same variable. The write has local interrupt disabled, but the plain reads result in data races. However, it is unlikely the compilers could do much damage here given that lru_add_pvec->nr is a "unsigned char" and there is an existing compiler barrier. Thus, annotate the reads using the data_race() macro. The data races were reported by KCSAN, BUG: KCSAN: data-race in lru_add_drain_cpu / rotate_reclaimable_page write to 0xffff9291ebcb8a40 of 1 bytes by interrupt on cpu 23: rotate_reclaimable_page+0x2df/0x490 pagevec_add at include/linux/pagevec.h:81 (inlined by) rotate_reclaimable_page at mm/swap.c:259 end_page_writeback+0x1b5/0x2b0 end_swap_bio_write+0x1d0/0x280 bio_endio+0x297/0x560 dec_pending+0x218/0x430 [dm_mod] clone_endio+0xe4/0x2c0 [dm_mod] bio_endio+0x297/0x560 blk_update_request+0x201/0x920 scsi_end_request+0x6b/0x4a0 scsi_io_completion+0xb7/0x7e0 scsi_finish_command+0x1ed/0x2a0 scsi_softirq_done+0x1c9/0x1d0 blk_done_softirq+0x181/0x1d0 __do_softirq+0xd9/0x57c irq_exit+0xa2/0xc0 do_IRQ+0x8b/0x190 ret_from_intr+0x0/0x42 delay_tsc+0x46/0x80 __const_udelay+0x3c/0x40 __udelay+0x10/0x20 kcsan_setup_watchpoint+0x202/0x3a0 __tsan_read1+0xc2/0x100 lru_add_drain_cpu+0xb8/0x3f0 lru_add_drain+0x25/0x40 shrink_active_list+0xe1/0xc80 shrink_lruvec+0x766/0xb70 shrink_node+0x2d6/0xca0 do_try_to_free_pages+0x1f7/0x9a0 try_to_free_pages+0x252/0x5b0 __alloc_pages_slowpath+0x458/0x1290 __alloc_pages_nodemask+0x3bb/0x450 alloc_pages_vma+0x8a/0x2c0 do_anonymous_page+0x16e/0x6f0 __handle_mm_fault+0xcd5/0xd40 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 read to 0xffff9291ebcb8a40 of 1 bytes by task 37761 on cpu 23: lru_add_drain_cpu+0xb8/0x3f0 lru_add_drain_cpu at mm/swap.c:602 lru_add_drain+0x25/0x40 shrink_active_list+0xe1/0xc80 shrink_lruvec+0x766/0xb70 shrink_node+0x2d6/0xca0 do_try_to_free_pages+0x1f7/0x9a0 try_to_free_pages+0x252/0x5b0 __alloc_pages_slowpath+0x458/0x1290 __alloc_pages_nodemask+0x3bb/0x450 alloc_pages_vma+0x8a/0x2c0 do_anonymous_page+0x16e/0x6f0 __handle_mm_fault+0xcd5/0xd40 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 2 locks held by oom02/37761: #0: ffff9281e5928808 (&mm->mmap_sem#2){++++}, at: do_page_fault #1: ffffffffb3ade380 (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part irq event stamp: 1949217 trace_hardirqs_on_thunk+0x1a/0x1c __do_softirq+0x2e7/0x57c __do_softirq+0x34c/0x57c irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: CPU: 23 PID: 37761 Comm: oom02 Not tainted 5.6.0-rc3-next-20200226+ #6 Hardware name: HP ProLiant BL660c Gen9, BIOS I38 10/17/2018 Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Marco Elver <elver@google.com> Link: http://lkml.kernel.org/r/20200228044018.1263-1-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-15 00:31:50 +00:00
data_race(pagevec_count(&per_cpu(lru_rotate.pvec, cpu))) ||
mm/swap: Use local_lock for protection The various struct pagevec per CPU variables are protected by disabling either preemption or interrupts across the critical sections. Inside these sections spinlocks have to be acquired. These spinlocks are regular spinlock_t types which are converted to "sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping locks cannot be acquired in preemption or interrupt disabled sections. local locks provide a trivial way to substitute preempt and interrupt disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps to preempt_disable() and local_lock_irq() to local_irq_disable(). Create lru_rotate_pvecs containing the pagevec and the locallock. Create lru_pvecs containing the remaining pagevecs and the locallock. Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid exporting the pvec structure. Change the relevant call sites to acquire these locks instead of using preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() / local_irq_save(). There is neither a functional change nor a change in the generated binary code for non PREEMPT_RT enabled non-debug kernels. When lockdep is enabled local locks have lockdep maps embedded. These allow lockdep to validate the protections, i.e. inappropriate usage of a preemption only protected sections would result in a lockdep warning while the same problem would not be noticed with a plain preempt_disable() based protection. local locks also improve readability as they provide a named scope for the protections while preempt/interrupt disable are opaque scopeless. Finally local locks allow PREEMPT_RT to substitute them with real locking primitives to ensure the correctness of operation in a fully preemptible kernel. [ bigeasy: Adopted to use local_lock ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-27 20:11:15 +00:00
pagevec_count(&per_cpu(lru_pvecs.lru_deactivate_file, cpu)) ||
pagevec_count(&per_cpu(lru_pvecs.lru_deactivate, cpu)) ||
pagevec_count(&per_cpu(lru_pvecs.lru_lazyfree, cpu)) ||
need_activate_page_drain(cpu) ||
mm/munlock: mlock_page() munlock_page() batch by pagevec A weakness of the page->mlock_count approach is the need for lruvec lock while holding page table lock. That is not an overhead we would allow on normal pages, but I think acceptable just for pages in an mlocked area. But let's try to amortize the extra cost by gathering on per-cpu pagevec before acquiring the lruvec lock. I have an unverified conjecture that the mlock pagevec might work out well for delaying the mlock processing of new file pages until they have got off lru_cache_add()'s pagevec and on to LRU. The initialization of page->mlock_count is subject to races and awkward: 0 or !!PageMlocked or 1? Was it wrong even in the implementation before this commit, which just widens the window? I haven't gone back to think it through. Maybe someone can point out a better way to initialize it. Bringing lru_cache_add_inactive_or_unevictable()'s mlock initialization into mm/mlock.c has helped: mlock_new_page(), using the mlock pagevec, rather than lru_cache_add()'s pagevec. Experimented with various orderings: the right thing seems to be for mlock_page() and mlock_new_page() to TestSetPageMlocked before adding to pagevec, but munlock_page() to leave TestClearPageMlocked to the later pagevec processing. Dropped the VM_BUG_ON_PAGE(PageTail)s this time around: they have made their point, and the thp_nr_page()s already contain a VM_BUG_ON_PGFLAGS() for that. This still leaves acquiring lruvec locks under page table lock each time the pagevec fills (or a THP is added): which I suppose is rather silly, since they sit on pagevec waiting to be processed long after page table lock has been dropped; but I'm disinclined to uglify the calling sequence until some load shows an actual problem with it (nothing wrong with taking lruvec lock under page table lock, just "nicer" to do it less). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:37:29 +00:00
need_mlock_page_drain(cpu) ||
has_bh_in_lru(cpu, NULL)) {
INIT_WORK(work, lru_add_drain_per_cpu);
mm: move pcp and lru-pcp draining into single wq We currently have 2 specific WQ_RECLAIM workqueues in the mm code. vmstat_wq for updating pcp stats and lru_add_drain_wq dedicated to drain per cpu lru caches. This seems more than necessary because both can run on a single WQ. Both do not block on locks requiring a memory allocation nor perform any allocations themselves. We will save one rescuer thread this way. On the other hand drain_all_pages() queues work on the system wq which doesn't have rescuer and so this depend on memory allocation (when all workers are stuck allocating and new ones cannot be created). Initially we thought this would be more of a theoretical problem but Hugh Dickins has reported: : 4.11-rc has been giving me hangs after hours of swapping load. At : first they looked like memory leaks ("fork: Cannot allocate memory"); : but for no good reason I happened to do "cat /proc/sys/vm/stat_refresh" : before looking at /proc/meminfo one time, and the stat_refresh stuck : in D state, waiting for completion of flush_work like many kworkers. : kthreadd waiting for completion of flush_work in drain_all_pages(). This worker should be using WQ_RECLAIM as well in order to guarantee a forward progress. We can reuse the same one as for lru draining and vmstat. Link: http://lkml.kernel.org/r/20170307131751.24936-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Tested-by: Yang Li <pku.leo@gmail.com> Tested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-07 23:05:05 +00:00
queue_work_on(cpu, mm_percpu_wq, work);
mm/swap: Do not abuse the seqcount_t latching API Commit eef1a429f234 ("mm/swap.c: piggyback lru_add_drain_all() calls") implemented an optimization mechanism to exit the to-be-started LRU drain operation (name it A) if another drain operation *started and finished* while (A) was blocked on the LRU draining mutex. This was done through a seqcount_t latch, which is an abuse of its semantics: 1. seqcount_t latching should be used for the purpose of switching between two storage places with sequence protection to allow interruptible, preemptible, writer sections. The referenced optimization mechanism has absolutely nothing to do with that. 2. The used raw_write_seqcount_latch() has two SMP write memory barriers to insure one consistent storage place out of the two storage places available. A full memory barrier is required instead: to guarantee that the pagevec counter stores visible by local CPU are visible to other CPUs -- before loading the current drain generation. Beside the seqcount_t API abuse, the semantics of a latch sequence counter was force-fitted into the referenced optimization. What was meant is to track "generations" of LRU draining operations, where "global lru draining generation = x" implies that all generations 0 < n <= x are already *scheduled* for draining -- thus nothing needs to be done if the current generation number n <= x. Remove the conceptually-inappropriate seqcount_t latch usage. Manually implement the referenced optimization using a counter and SMP memory barriers. Note, while at it, use the non-atomic variant of cpumask_set_cpu(), __cpumask_set_cpu(), due to the already existing mutex protection. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/87y2pg9erj.fsf@vostro.fn.ogness.net
2020-08-27 11:40:38 +00:00
__cpumask_set_cpu(cpu, &has_work);
}
}
for_each_cpu(cpu, &has_work)
flush_work(&per_cpu(lru_add_drain_work, cpu));
mm/swap.c: piggyback lru_add_drain_all() calls This is a very slow operation. Right now POSIX_FADV_DONTNEED is the top user because it has to freeze page references when removing it from the cache. invalidate_bdev() calls it for the same reason. Both are triggered from userspace, so it's easy to generate a storm. mlock/mlockall no longer calls lru_add_drain_all - I've seen here serious slowdown on older kernels. There are some less obvious paths in memory migration/CMA/offlining which shouldn't call frequently. The worst case requires a non-trivial workload because lru_add_drain_all() skips cpus where vectors are empty. Something must constantly generate a flow of pages for each cpu. Also cpus must be busy to make scheduling per-cpu works slower. And the machine must be big enough (64+ cpus in our case). In our case that was a massive series of mlock calls in map-reduce while other tasks write logs (and generates flows of new pages in per-cpu vectors). Mlock calls were serialized by mutex and accumulated latency up to 10 seconds or more. The kernel does not call lru_add_drain_all on mlock paths since 4.15, but the same scenario could be triggered by fadvise(POSIX_FADV_DONTNEED) or any other remaining user. There is no reason to do the drain again if somebody else already drained all the per-cpu vectors while we waited for the lock. Piggyback on a drain starting and finishing while we wait for the lock: all pages pending at the time of our entry were drained from the vectors. Callers like POSIX_FADV_DONTNEED retry their operations once after draining per-cpu vectors when pages have unexpected references. Link: http://lkml.kernel.org/r/157019456205.3142.3369423180908482020.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:40 +00:00
done:
mutex_unlock(&lock);
}
mm: disable LRU pagevec during the migration temporarily LRU pagevec holds refcount of pages until the pagevec are drained. It could prevent migration since the refcount of the page is greater than the expection in migration logic. To mitigate the issue, callers of migrate_pages drains LRU pagevec via migrate_prep or lru_add_drain_all before migrate_pages call. However, it's not enough because pages coming into pagevec after the draining call still could stay at the pagevec so it could keep preventing page migration. Since some callers of migrate_pages have retrial logic with LRU draining, the page would migrate at next trail but it is still fragile in that it doesn't close the fundamental race between upcoming LRU pages into pagvec and migration so the migration failure could cause contiguous memory allocation failure in the end. To close the race, this patch disables lru caches(i.e, pagevec) during ongoing migration until migrate is done. Since it's really hard to reproduce, I measured how many times migrate_pages retried with force mode(it is about a fallback to a sync migration) with below debug code. int migrate_pages(struct list_head *from, new_page_t get_new_page, .. .. if (rc && reason == MR_CONTIG_RANGE && pass > 2) { printk(KERN_ERR, "pfn 0x%lx reason %d", page_to_pfn(page), rc); dump_page(page, "fail to migrate"); } The test was repeating android apps launching with cma allocation in background every five seconds. Total cma allocation count was about 500 during the testing. With this patch, the dump_page count was reduced from 400 to 30. The new interface is also useful for memory hotplug which currently drains lru pcp caches after each migration failure. This is rather suboptimal as it has to disrupt others running during the operation. With the new interface the operation happens only once. This is also in line with pcp allocator cache which are disabled for the offlining as well. Link: https://lkml.kernel.org/r/20210319175127.886124-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Chris Goldsworthy <cgoldswo@codeaurora.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Oliver Sang <oliver.sang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:36:54 +00:00
void lru_add_drain_all(void)
{
__lru_add_drain_all(false);
}
#else
void lru_add_drain_all(void)
{
lru_add_drain();
}
mm/swap: Do not abuse the seqcount_t latching API Commit eef1a429f234 ("mm/swap.c: piggyback lru_add_drain_all() calls") implemented an optimization mechanism to exit the to-be-started LRU drain operation (name it A) if another drain operation *started and finished* while (A) was blocked on the LRU draining mutex. This was done through a seqcount_t latch, which is an abuse of its semantics: 1. seqcount_t latching should be used for the purpose of switching between two storage places with sequence protection to allow interruptible, preemptible, writer sections. The referenced optimization mechanism has absolutely nothing to do with that. 2. The used raw_write_seqcount_latch() has two SMP write memory barriers to insure one consistent storage place out of the two storage places available. A full memory barrier is required instead: to guarantee that the pagevec counter stores visible by local CPU are visible to other CPUs -- before loading the current drain generation. Beside the seqcount_t API abuse, the semantics of a latch sequence counter was force-fitted into the referenced optimization. What was meant is to track "generations" of LRU draining operations, where "global lru draining generation = x" implies that all generations 0 < n <= x are already *scheduled* for draining -- thus nothing needs to be done if the current generation number n <= x. Remove the conceptually-inappropriate seqcount_t latch usage. Manually implement the referenced optimization using a counter and SMP memory barriers. Note, while at it, use the non-atomic variant of cpumask_set_cpu(), __cpumask_set_cpu(), due to the already existing mutex protection. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/87y2pg9erj.fsf@vostro.fn.ogness.net
2020-08-27 11:40:38 +00:00
#endif /* CONFIG_SMP */
mm: disable LRU pagevec during the migration temporarily LRU pagevec holds refcount of pages until the pagevec are drained. It could prevent migration since the refcount of the page is greater than the expection in migration logic. To mitigate the issue, callers of migrate_pages drains LRU pagevec via migrate_prep or lru_add_drain_all before migrate_pages call. However, it's not enough because pages coming into pagevec after the draining call still could stay at the pagevec so it could keep preventing page migration. Since some callers of migrate_pages have retrial logic with LRU draining, the page would migrate at next trail but it is still fragile in that it doesn't close the fundamental race between upcoming LRU pages into pagvec and migration so the migration failure could cause contiguous memory allocation failure in the end. To close the race, this patch disables lru caches(i.e, pagevec) during ongoing migration until migrate is done. Since it's really hard to reproduce, I measured how many times migrate_pages retried with force mode(it is about a fallback to a sync migration) with below debug code. int migrate_pages(struct list_head *from, new_page_t get_new_page, .. .. if (rc && reason == MR_CONTIG_RANGE && pass > 2) { printk(KERN_ERR, "pfn 0x%lx reason %d", page_to_pfn(page), rc); dump_page(page, "fail to migrate"); } The test was repeating android apps launching with cma allocation in background every five seconds. Total cma allocation count was about 500 during the testing. With this patch, the dump_page count was reduced from 400 to 30. The new interface is also useful for memory hotplug which currently drains lru pcp caches after each migration failure. This is rather suboptimal as it has to disrupt others running during the operation. With the new interface the operation happens only once. This is also in line with pcp allocator cache which are disabled for the offlining as well. Link: https://lkml.kernel.org/r/20210319175127.886124-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Chris Goldsworthy <cgoldswo@codeaurora.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Oliver Sang <oliver.sang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:36:54 +00:00
atomic_t lru_disable_count = ATOMIC_INIT(0);
/*
* lru_cache_disable() needs to be called before we start compiling
* a list of pages to be migrated using isolate_lru_page().
* It drains pages on LRU cache and then disable on all cpus until
* lru_cache_enable is called.
*
* Must be paired with a call to lru_cache_enable().
*/
void lru_cache_disable(void)
{
atomic_inc(&lru_disable_count);
/*
mm: lru_cache_disable: replace work queue synchronization with synchronize_rcu On systems that run FIFO:1 applications that busy loop, any SCHED_OTHER task that attempts to execute on such a CPU (such as work threads) will not be scheduled, which leads to system hangs. Commit d479960e44f27e0e5 ("mm: disable LRU pagevec during the migration temporarily") relies on queueing work items on all online CPUs to ensure visibility of lru_disable_count. To fix this, replace the usage of work items with synchronize_rcu, which provides the same guarantees. Readers of lru_disable_count are protected by either disabling preemption or rcu_read_lock: preempt_disable, local_irq_disable [bh_lru_lock()] rcu_read_lock [rt_spin_lock CONFIG_PREEMPT_RT] preempt_disable [local_lock !CONFIG_PREEMPT_RT] Since v5.1 kernel, synchronize_rcu() is guaranteed to wait on preempt_disable() regions of code. So any CPU which sees lru_disable_count = 0 will have exited the critical section when synchronize_rcu() returns. Link: https://lkml.kernel.org/r/Yin7hDxdt0s/x+fp@fuller.cnet Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:45:47 +00:00
* Readers of lru_disable_count are protected by either disabling
* preemption or rcu_read_lock:
*
* preempt_disable, local_irq_disable [bh_lru_lock()]
* rcu_read_lock [rt_spin_lock CONFIG_PREEMPT_RT]
* preempt_disable [local_lock !CONFIG_PREEMPT_RT]
*
* Since v5.1 kernel, synchronize_rcu() is guaranteed to wait on
* preempt_disable() regions of code. So any CPU which sees
* lru_disable_count = 0 will have exited the critical
* section when synchronize_rcu() returns.
mm: disable LRU pagevec during the migration temporarily LRU pagevec holds refcount of pages until the pagevec are drained. It could prevent migration since the refcount of the page is greater than the expection in migration logic. To mitigate the issue, callers of migrate_pages drains LRU pagevec via migrate_prep or lru_add_drain_all before migrate_pages call. However, it's not enough because pages coming into pagevec after the draining call still could stay at the pagevec so it could keep preventing page migration. Since some callers of migrate_pages have retrial logic with LRU draining, the page would migrate at next trail but it is still fragile in that it doesn't close the fundamental race between upcoming LRU pages into pagvec and migration so the migration failure could cause contiguous memory allocation failure in the end. To close the race, this patch disables lru caches(i.e, pagevec) during ongoing migration until migrate is done. Since it's really hard to reproduce, I measured how many times migrate_pages retried with force mode(it is about a fallback to a sync migration) with below debug code. int migrate_pages(struct list_head *from, new_page_t get_new_page, .. .. if (rc && reason == MR_CONTIG_RANGE && pass > 2) { printk(KERN_ERR, "pfn 0x%lx reason %d", page_to_pfn(page), rc); dump_page(page, "fail to migrate"); } The test was repeating android apps launching with cma allocation in background every five seconds. Total cma allocation count was about 500 during the testing. With this patch, the dump_page count was reduced from 400 to 30. The new interface is also useful for memory hotplug which currently drains lru pcp caches after each migration failure. This is rather suboptimal as it has to disrupt others running during the operation. With the new interface the operation happens only once. This is also in line with pcp allocator cache which are disabled for the offlining as well. Link: https://lkml.kernel.org/r/20210319175127.886124-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Chris Goldsworthy <cgoldswo@codeaurora.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Oliver Sang <oliver.sang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:36:54 +00:00
*/
synchronize_rcu_expedited();
mm: lru_cache_disable: replace work queue synchronization with synchronize_rcu On systems that run FIFO:1 applications that busy loop, any SCHED_OTHER task that attempts to execute on such a CPU (such as work threads) will not be scheduled, which leads to system hangs. Commit d479960e44f27e0e5 ("mm: disable LRU pagevec during the migration temporarily") relies on queueing work items on all online CPUs to ensure visibility of lru_disable_count. To fix this, replace the usage of work items with synchronize_rcu, which provides the same guarantees. Readers of lru_disable_count are protected by either disabling preemption or rcu_read_lock: preempt_disable, local_irq_disable [bh_lru_lock()] rcu_read_lock [rt_spin_lock CONFIG_PREEMPT_RT] preempt_disable [local_lock !CONFIG_PREEMPT_RT] Since v5.1 kernel, synchronize_rcu() is guaranteed to wait on preempt_disable() regions of code. So any CPU which sees lru_disable_count = 0 will have exited the critical section when synchronize_rcu() returns. Link: https://lkml.kernel.org/r/Yin7hDxdt0s/x+fp@fuller.cnet Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:45:47 +00:00
#ifdef CONFIG_SMP
mm: disable LRU pagevec during the migration temporarily LRU pagevec holds refcount of pages until the pagevec are drained. It could prevent migration since the refcount of the page is greater than the expection in migration logic. To mitigate the issue, callers of migrate_pages drains LRU pagevec via migrate_prep or lru_add_drain_all before migrate_pages call. However, it's not enough because pages coming into pagevec after the draining call still could stay at the pagevec so it could keep preventing page migration. Since some callers of migrate_pages have retrial logic with LRU draining, the page would migrate at next trail but it is still fragile in that it doesn't close the fundamental race between upcoming LRU pages into pagvec and migration so the migration failure could cause contiguous memory allocation failure in the end. To close the race, this patch disables lru caches(i.e, pagevec) during ongoing migration until migrate is done. Since it's really hard to reproduce, I measured how many times migrate_pages retried with force mode(it is about a fallback to a sync migration) with below debug code. int migrate_pages(struct list_head *from, new_page_t get_new_page, .. .. if (rc && reason == MR_CONTIG_RANGE && pass > 2) { printk(KERN_ERR, "pfn 0x%lx reason %d", page_to_pfn(page), rc); dump_page(page, "fail to migrate"); } The test was repeating android apps launching with cma allocation in background every five seconds. Total cma allocation count was about 500 during the testing. With this patch, the dump_page count was reduced from 400 to 30. The new interface is also useful for memory hotplug which currently drains lru pcp caches after each migration failure. This is rather suboptimal as it has to disrupt others running during the operation. With the new interface the operation happens only once. This is also in line with pcp allocator cache which are disabled for the offlining as well. Link: https://lkml.kernel.org/r/20210319175127.886124-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Chris Goldsworthy <cgoldswo@codeaurora.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Oliver Sang <oliver.sang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:36:54 +00:00
__lru_add_drain_all(true);
#else
lru_add_and_bh_lrus_drain();
mm: disable LRU pagevec during the migration temporarily LRU pagevec holds refcount of pages until the pagevec are drained. It could prevent migration since the refcount of the page is greater than the expection in migration logic. To mitigate the issue, callers of migrate_pages drains LRU pagevec via migrate_prep or lru_add_drain_all before migrate_pages call. However, it's not enough because pages coming into pagevec after the draining call still could stay at the pagevec so it could keep preventing page migration. Since some callers of migrate_pages have retrial logic with LRU draining, the page would migrate at next trail but it is still fragile in that it doesn't close the fundamental race between upcoming LRU pages into pagvec and migration so the migration failure could cause contiguous memory allocation failure in the end. To close the race, this patch disables lru caches(i.e, pagevec) during ongoing migration until migrate is done. Since it's really hard to reproduce, I measured how many times migrate_pages retried with force mode(it is about a fallback to a sync migration) with below debug code. int migrate_pages(struct list_head *from, new_page_t get_new_page, .. .. if (rc && reason == MR_CONTIG_RANGE && pass > 2) { printk(KERN_ERR, "pfn 0x%lx reason %d", page_to_pfn(page), rc); dump_page(page, "fail to migrate"); } The test was repeating android apps launching with cma allocation in background every five seconds. Total cma allocation count was about 500 during the testing. With this patch, the dump_page count was reduced from 400 to 30. The new interface is also useful for memory hotplug which currently drains lru pcp caches after each migration failure. This is rather suboptimal as it has to disrupt others running during the operation. With the new interface the operation happens only once. This is also in line with pcp allocator cache which are disabled for the offlining as well. Link: https://lkml.kernel.org/r/20210319175127.886124-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Chris Goldsworthy <cgoldswo@codeaurora.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Oliver Sang <oliver.sang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:36:54 +00:00
#endif
}
mm: memcontrol: do not kill uncharge batching in free_pages_and_swap_cache free_pages_and_swap_cache limits release_pages to PAGEVEC_SIZE chunks. This is not a big deal for the normal release path but it completely kills memcg uncharge batching which reduces res_counter spin_lock contention. Dave has noticed this with his page fault scalability test case on a large machine when the lock was basically dominating on all CPUs: 80.18% 80.18% [kernel] [k] _raw_spin_lock | --- _raw_spin_lock | |--66.59%-- res_counter_uncharge_until | res_counter_uncharge | uncharge_batch | uncharge_list | mem_cgroup_uncharge_list | release_pages | free_pages_and_swap_cache | tlb_flush_mmu_free | | | |--90.12%-- unmap_single_vma | | unmap_vmas | | unmap_region | | do_munmap | | vm_munmap | | sys_munmap | | system_call_fastpath | | __GI___munmap | | | --9.88%-- tlb_flush_mmu | tlb_finish_mmu | unmap_region | do_munmap | vm_munmap | sys_munmap | system_call_fastpath | __GI___munmap In his case the load was running in the root memcg and that part has been handled by reverting 05b843012335 ("mm: memcontrol: use root_mem_cgroup res_counter") because this is a clear regression, but the problem remains inside dedicated memcgs. There is no reason to limit release_pages to PAGEVEC_SIZE batches other than lru_lock held times. This logic, however, can be moved inside the function. mem_cgroup_uncharge_list and free_hot_cold_page_list do not hold any lock for the whole pages_to_free list so it is safe to call them in a single run. The release_pages() code was previously breaking the lru_lock each PAGEVEC_SIZE pages (ie, 14 pages). However this code has no usage of pagevecs so switch to breaking the lock at least every SWAP_CLUSTER_MAX (32) pages. This means that the lock acquisition frequency is approximately halved and the max hold times are approximately doubled. The now unneeded batching is removed from free_pages_and_swap_cache(). Also update the grossly out-of-date release_pages documentation. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Dave Hansen <dave@sr71.net> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:28:52 +00:00
/**
* release_pages - batched put_page()
mm: memcontrol: do not kill uncharge batching in free_pages_and_swap_cache free_pages_and_swap_cache limits release_pages to PAGEVEC_SIZE chunks. This is not a big deal for the normal release path but it completely kills memcg uncharge batching which reduces res_counter spin_lock contention. Dave has noticed this with his page fault scalability test case on a large machine when the lock was basically dominating on all CPUs: 80.18% 80.18% [kernel] [k] _raw_spin_lock | --- _raw_spin_lock | |--66.59%-- res_counter_uncharge_until | res_counter_uncharge | uncharge_batch | uncharge_list | mem_cgroup_uncharge_list | release_pages | free_pages_and_swap_cache | tlb_flush_mmu_free | | | |--90.12%-- unmap_single_vma | | unmap_vmas | | unmap_region | | do_munmap | | vm_munmap | | sys_munmap | | system_call_fastpath | | __GI___munmap | | | --9.88%-- tlb_flush_mmu | tlb_finish_mmu | unmap_region | do_munmap | vm_munmap | sys_munmap | system_call_fastpath | __GI___munmap In his case the load was running in the root memcg and that part has been handled by reverting 05b843012335 ("mm: memcontrol: use root_mem_cgroup res_counter") because this is a clear regression, but the problem remains inside dedicated memcgs. There is no reason to limit release_pages to PAGEVEC_SIZE batches other than lru_lock held times. This logic, however, can be moved inside the function. mem_cgroup_uncharge_list and free_hot_cold_page_list do not hold any lock for the whole pages_to_free list so it is safe to call them in a single run. The release_pages() code was previously breaking the lru_lock each PAGEVEC_SIZE pages (ie, 14 pages). However this code has no usage of pagevecs so switch to breaking the lock at least every SWAP_CLUSTER_MAX (32) pages. This means that the lock acquisition frequency is approximately halved and the max hold times are approximately doubled. The now unneeded batching is removed from free_pages_and_swap_cache(). Also update the grossly out-of-date release_pages documentation. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Dave Hansen <dave@sr71.net> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:28:52 +00:00
* @pages: array of pages to release
* @nr: number of pages
*
mm: memcontrol: do not kill uncharge batching in free_pages_and_swap_cache free_pages_and_swap_cache limits release_pages to PAGEVEC_SIZE chunks. This is not a big deal for the normal release path but it completely kills memcg uncharge batching which reduces res_counter spin_lock contention. Dave has noticed this with his page fault scalability test case on a large machine when the lock was basically dominating on all CPUs: 80.18% 80.18% [kernel] [k] _raw_spin_lock | --- _raw_spin_lock | |--66.59%-- res_counter_uncharge_until | res_counter_uncharge | uncharge_batch | uncharge_list | mem_cgroup_uncharge_list | release_pages | free_pages_and_swap_cache | tlb_flush_mmu_free | | | |--90.12%-- unmap_single_vma | | unmap_vmas | | unmap_region | | do_munmap | | vm_munmap | | sys_munmap | | system_call_fastpath | | __GI___munmap | | | --9.88%-- tlb_flush_mmu | tlb_finish_mmu | unmap_region | do_munmap | vm_munmap | sys_munmap | system_call_fastpath | __GI___munmap In his case the load was running in the root memcg and that part has been handled by reverting 05b843012335 ("mm: memcontrol: use root_mem_cgroup res_counter") because this is a clear regression, but the problem remains inside dedicated memcgs. There is no reason to limit release_pages to PAGEVEC_SIZE batches other than lru_lock held times. This logic, however, can be moved inside the function. mem_cgroup_uncharge_list and free_hot_cold_page_list do not hold any lock for the whole pages_to_free list so it is safe to call them in a single run. The release_pages() code was previously breaking the lru_lock each PAGEVEC_SIZE pages (ie, 14 pages). However this code has no usage of pagevecs so switch to breaking the lock at least every SWAP_CLUSTER_MAX (32) pages. This means that the lock acquisition frequency is approximately halved and the max hold times are approximately doubled. The now unneeded batching is removed from free_pages_and_swap_cache(). Also update the grossly out-of-date release_pages documentation. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Dave Hansen <dave@sr71.net> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:28:52 +00:00
* Decrement the reference count on all the pages in @pages. If it
* fell to zero, remove the page from the LRU and free it.
*/
void release_pages(struct page **pages, int nr)
{
int i;
LIST_HEAD(pages_to_free);
mm/lru: replace pgdat lru_lock with lruvec lock This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:29 +00:00
struct lruvec *lruvec = NULL;
unsigned long flags = 0;
treewide: Remove uninitialized_var() usage Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 20:09:38 +00:00
unsigned int lock_batch;
for (i = 0; i < nr; i++) {
struct page *page = pages[i];
struct folio *folio = page_folio(page);
mm: memcontrol: do not kill uncharge batching in free_pages_and_swap_cache free_pages_and_swap_cache limits release_pages to PAGEVEC_SIZE chunks. This is not a big deal for the normal release path but it completely kills memcg uncharge batching which reduces res_counter spin_lock contention. Dave has noticed this with his page fault scalability test case on a large machine when the lock was basically dominating on all CPUs: 80.18% 80.18% [kernel] [k] _raw_spin_lock | --- _raw_spin_lock | |--66.59%-- res_counter_uncharge_until | res_counter_uncharge | uncharge_batch | uncharge_list | mem_cgroup_uncharge_list | release_pages | free_pages_and_swap_cache | tlb_flush_mmu_free | | | |--90.12%-- unmap_single_vma | | unmap_vmas | | unmap_region | | do_munmap | | vm_munmap | | sys_munmap | | system_call_fastpath | | __GI___munmap | | | --9.88%-- tlb_flush_mmu | tlb_finish_mmu | unmap_region | do_munmap | vm_munmap | sys_munmap | system_call_fastpath | __GI___munmap In his case the load was running in the root memcg and that part has been handled by reverting 05b843012335 ("mm: memcontrol: use root_mem_cgroup res_counter") because this is a clear regression, but the problem remains inside dedicated memcgs. There is no reason to limit release_pages to PAGEVEC_SIZE batches other than lru_lock held times. This logic, however, can be moved inside the function. mem_cgroup_uncharge_list and free_hot_cold_page_list do not hold any lock for the whole pages_to_free list so it is safe to call them in a single run. The release_pages() code was previously breaking the lru_lock each PAGEVEC_SIZE pages (ie, 14 pages). However this code has no usage of pagevecs so switch to breaking the lock at least every SWAP_CLUSTER_MAX (32) pages. This means that the lock acquisition frequency is approximately halved and the max hold times are approximately doubled. The now unneeded batching is removed from free_pages_and_swap_cache(). Also update the grossly out-of-date release_pages documentation. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Dave Hansen <dave@sr71.net> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:28:52 +00:00
/*
* Make sure the IRQ-safe lock-holding time does not get
* excessive with a continuous string of pages from the
mm/lru: replace pgdat lru_lock with lruvec lock This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:29 +00:00
* same lruvec. The lock is held only if lruvec != NULL.
mm: memcontrol: do not kill uncharge batching in free_pages_and_swap_cache free_pages_and_swap_cache limits release_pages to PAGEVEC_SIZE chunks. This is not a big deal for the normal release path but it completely kills memcg uncharge batching which reduces res_counter spin_lock contention. Dave has noticed this with his page fault scalability test case on a large machine when the lock was basically dominating on all CPUs: 80.18% 80.18% [kernel] [k] _raw_spin_lock | --- _raw_spin_lock | |--66.59%-- res_counter_uncharge_until | res_counter_uncharge | uncharge_batch | uncharge_list | mem_cgroup_uncharge_list | release_pages | free_pages_and_swap_cache | tlb_flush_mmu_free | | | |--90.12%-- unmap_single_vma | | unmap_vmas | | unmap_region | | do_munmap | | vm_munmap | | sys_munmap | | system_call_fastpath | | __GI___munmap | | | --9.88%-- tlb_flush_mmu | tlb_finish_mmu | unmap_region | do_munmap | vm_munmap | sys_munmap | system_call_fastpath | __GI___munmap In his case the load was running in the root memcg and that part has been handled by reverting 05b843012335 ("mm: memcontrol: use root_mem_cgroup res_counter") because this is a clear regression, but the problem remains inside dedicated memcgs. There is no reason to limit release_pages to PAGEVEC_SIZE batches other than lru_lock held times. This logic, however, can be moved inside the function. mem_cgroup_uncharge_list and free_hot_cold_page_list do not hold any lock for the whole pages_to_free list so it is safe to call them in a single run. The release_pages() code was previously breaking the lru_lock each PAGEVEC_SIZE pages (ie, 14 pages). However this code has no usage of pagevecs so switch to breaking the lock at least every SWAP_CLUSTER_MAX (32) pages. This means that the lock acquisition frequency is approximately halved and the max hold times are approximately doubled. The now unneeded batching is removed from free_pages_and_swap_cache(). Also update the grossly out-of-date release_pages documentation. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Dave Hansen <dave@sr71.net> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:28:52 +00:00
*/
mm/lru: replace pgdat lru_lock with lruvec lock This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:29 +00:00
if (lruvec && ++lock_batch == SWAP_CLUSTER_MAX) {
unlock_page_lruvec_irqrestore(lruvec, flags);
lruvec = NULL;
mm: memcontrol: do not kill uncharge batching in free_pages_and_swap_cache free_pages_and_swap_cache limits release_pages to PAGEVEC_SIZE chunks. This is not a big deal for the normal release path but it completely kills memcg uncharge batching which reduces res_counter spin_lock contention. Dave has noticed this with his page fault scalability test case on a large machine when the lock was basically dominating on all CPUs: 80.18% 80.18% [kernel] [k] _raw_spin_lock | --- _raw_spin_lock | |--66.59%-- res_counter_uncharge_until | res_counter_uncharge | uncharge_batch | uncharge_list | mem_cgroup_uncharge_list | release_pages | free_pages_and_swap_cache | tlb_flush_mmu_free | | | |--90.12%-- unmap_single_vma | | unmap_vmas | | unmap_region | | do_munmap | | vm_munmap | | sys_munmap | | system_call_fastpath | | __GI___munmap | | | --9.88%-- tlb_flush_mmu | tlb_finish_mmu | unmap_region | do_munmap | vm_munmap | sys_munmap | system_call_fastpath | __GI___munmap In his case the load was running in the root memcg and that part has been handled by reverting 05b843012335 ("mm: memcontrol: use root_mem_cgroup res_counter") because this is a clear regression, but the problem remains inside dedicated memcgs. There is no reason to limit release_pages to PAGEVEC_SIZE batches other than lru_lock held times. This logic, however, can be moved inside the function. mem_cgroup_uncharge_list and free_hot_cold_page_list do not hold any lock for the whole pages_to_free list so it is safe to call them in a single run. The release_pages() code was previously breaking the lru_lock each PAGEVEC_SIZE pages (ie, 14 pages). However this code has no usage of pagevecs so switch to breaking the lock at least every SWAP_CLUSTER_MAX (32) pages. This means that the lock acquisition frequency is approximately halved and the max hold times are approximately doubled. The now unneeded batching is removed from free_pages_and_swap_cache(). Also update the grossly out-of-date release_pages documentation. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Dave Hansen <dave@sr71.net> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:28:52 +00:00
}
page = &folio->page;
thp: reduce usage of huge zero page's atomic counter The global zero page is used to satisfy an anonymous read fault. If THP(Transparent HugePage) is enabled then the global huge zero page is used. The global huge zero page uses an atomic counter for reference counting and is allocated/freed dynamically according to its counter value. CPU time spent on that counter will greatly increase if there are a lot of processes doing anonymous read faults. This patch proposes a way to reduce the access to the global counter so that the CPU load can be reduced accordingly. To do this, a new flag of the mm_struct is introduced: MMF_USED_HUGE_ZERO_PAGE. With this flag, the process only need to touch the global counter in two cases: 1 The first time it uses the global huge zero page; 2 The time when mm_user of its mm_struct reaches zero. Note that right now, the huge zero page is eligible to be freed as soon as its last use goes away. With this patch, the page will not be eligible to be freed until the exit of the last process from which it was ever used. And with the use of mm_user, the kthread is not eligible to use huge zero page either. Since no kthread is using huge zero page today, there is no difference after applying this patch. But if that is not desired, I can change it to when mm_count reaches zero. Case used for test on Haswell EP: usemem -n 72 --readonly -j 0x200000 100G Which spawns 72 processes and each will mmap 100G anonymous space and then do read only access to that space sequentially with a step of 2MB. CPU cycles from perf report for base commit: 54.03% usemem [kernel.kallsyms] [k] get_huge_zero_page CPU cycles from perf report for this commit: 0.11% usemem [kernel.kallsyms] [k] mm_get_huge_zero_page Performance(throughput) of the workload for base commit: 1784430792 Performance(throughput) of the workload for this commit: 4726928591 164% increase. Runtime of the workload for base commit: 707592 us Runtime of the workload for this commit: 303970 us 50% drop. Link: http://lkml.kernel.org/r/fe51a88f-446a-4622-1363-ad1282d71385@intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 00:00:08 +00:00
if (is_huge_zero_page(page))
continue;
mm/swap: fix release_pages() when releasing devmap pages release_pages() is an optimized version of a loop around put_page(). Unfortunately for devmap pages the logic is not entirely correct in release_pages(). This is because device pages can be more than type MEMORY_DEVICE_PUBLIC. There are in fact 4 types, private, public, FS DAX, and PCI P2PDMA. Some of these have specific needs to "put" the page while others do not. This logic to handle any special needs is contained in put_devmap_managed_page(). Therefore all devmap pages should be processed by this function where we can contain the correct logic for a page put. Handle all device type pages within release_pages() by calling put_devmap_managed_page() on all devmap pages. If put_devmap_managed_page() returns true the page has been put and we continue with the next page. A false return of put_devmap_managed_page() means the page did not require special processing and should fall to "normal" processing. This was found via code inspection while determining if release_pages() and the new put_user_pages() could be interchangeable.[1] [1] https://lkml.kernel.org/r/20190523172852.GA27175@iweiny-DESK2.sc.intel.com Link: https://lkml.kernel.org/r/20190605214922.17684-1-ira.weiny@intel.com Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-05 21:49:22 +00:00
if (is_zone_device_page(page)) {
mm/lru: replace pgdat lru_lock with lruvec lock This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:29 +00:00
if (lruvec) {
unlock_page_lruvec_irqrestore(lruvec, flags);
lruvec = NULL;
}
if (put_devmap_managed_page(page))
mm/swap: fix release_pages() when releasing devmap pages release_pages() is an optimized version of a loop around put_page(). Unfortunately for devmap pages the logic is not entirely correct in release_pages(). This is because device pages can be more than type MEMORY_DEVICE_PUBLIC. There are in fact 4 types, private, public, FS DAX, and PCI P2PDMA. Some of these have specific needs to "put" the page while others do not. This logic to handle any special needs is contained in put_devmap_managed_page(). Therefore all devmap pages should be processed by this function where we can contain the correct logic for a page put. Handle all device type pages within release_pages() by calling put_devmap_managed_page() on all devmap pages. If put_devmap_managed_page() returns true the page has been put and we continue with the next page. A false return of put_devmap_managed_page() means the page did not require special processing and should fall to "normal" processing. This was found via code inspection while determining if release_pages() and the new put_user_pages() could be interchangeable.[1] [1] https://lkml.kernel.org/r/20190523172852.GA27175@iweiny-DESK2.sc.intel.com Link: https://lkml.kernel.org/r/20190605214922.17684-1-ira.weiny@intel.com Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-05 21:49:22 +00:00
continue;
if (put_page_testzero(page))
mm: remove the extra ZONE_DEVICE struct page refcount ZONE_DEVICE struct pages have an extra reference count that complicates the code for put_page() and several places in the kernel that need to check the reference count to see that a page is not being used (gup, compaction, migration, etc.). Clean up the code so the reference count doesn't need to be treated specially for ZONE_DEVICE pages. Note that this excludes the special idle page wakeup for fsdax pages, which still happens at refcount 1. This is a separate issue and will be sorted out later. Given that only fsdax pages require the notifiacation when the refcount hits 1 now, the PAGEMAP_OPS Kconfig symbol can go away and be replaced with a FS_DAX check for this hook in the put_page fastpath. Based on an earlier patch from Ralph Campbell <rcampbell@nvidia.com>. Link: https://lkml.kernel.org/r/20220210072828.2930359-8-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Chaitanya Kulkarni <kch@nvidia.com> Cc: Christian Knig <christian.koenig@amd.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-16 04:31:36 +00:00
free_zone_device_page(page);
continue;
}
2005-10-30 01:16:12 +00:00
if (!put_page_testzero(page))
continue;
mm: drop tail page refcounting Tail page refcounting is utterly complicated and painful to support. It uses ->_mapcount on tail pages to store how many times this page is pinned. get_page() bumps ->_mapcount on tail page in addition to ->_count on head. This information is required by split_huge_page() to be able to distribute pins from head of compound page to tails during the split. We will need ->_mapcount to account PTE mappings of subpages of the compound page. We eliminate need in current meaning of ->_mapcount in tail pages by forbidding split entirely if the page is pinned. The only user of tail page refcounting is THP which is marked BROKEN for now. Let's drop all this mess. It makes get_page() and put_page() much simpler. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:52:56 +00:00
if (PageCompound(page)) {
mm/lru: replace pgdat lru_lock with lruvec lock This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:29 +00:00
if (lruvec) {
unlock_page_lruvec_irqrestore(lruvec, flags);
lruvec = NULL;
mm: drop tail page refcounting Tail page refcounting is utterly complicated and painful to support. It uses ->_mapcount on tail pages to store how many times this page is pinned. get_page() bumps ->_mapcount on tail page in addition to ->_count on head. This information is required by split_huge_page() to be able to distribute pins from head of compound page to tails during the split. We will need ->_mapcount to account PTE mappings of subpages of the compound page. We eliminate need in current meaning of ->_mapcount in tail pages by forbidding split entirely if the page is pinned. The only user of tail page refcounting is THP which is marked BROKEN for now. Let's drop all this mess. It makes get_page() and put_page() much simpler. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:52:56 +00:00
}
__put_compound_page(page);
continue;
}
if (PageLRU(page)) {
mm/lru: introduce relock_page_lruvec() Add relock_page_lruvec() to replace repeated same code, no functional change. When testing for relock we can avoid the need for RCU locking if we simply compare the page pgdat and memcg pointers versus those that the lruvec is holding. By doing this we can avoid the extra pointer walks and accesses of the memory cgroup. In addition we can avoid the checks entirely if lruvec is currently NULL. [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/66d8e79d-7ec6-bfbc-1c82-bf32db3ae5b7@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-19-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Tejun Heo <tj@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:33 +00:00
struct lruvec *prev_lruvec = lruvec;
lruvec = folio_lruvec_relock_irqsave(folio, lruvec,
mm/lru: introduce relock_page_lruvec() Add relock_page_lruvec() to replace repeated same code, no functional change. When testing for relock we can avoid the need for RCU locking if we simply compare the page pgdat and memcg pointers versus those that the lruvec is holding. By doing this we can avoid the extra pointer walks and accesses of the memory cgroup. In addition we can avoid the checks entirely if lruvec is currently NULL. [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/66d8e79d-7ec6-bfbc-1c82-bf32db3ae5b7@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-19-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Tejun Heo <tj@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:33 +00:00
&flags);
if (prev_lruvec != lruvec)
mm: memcontrol: do not kill uncharge batching in free_pages_and_swap_cache free_pages_and_swap_cache limits release_pages to PAGEVEC_SIZE chunks. This is not a big deal for the normal release path but it completely kills memcg uncharge batching which reduces res_counter spin_lock contention. Dave has noticed this with his page fault scalability test case on a large machine when the lock was basically dominating on all CPUs: 80.18% 80.18% [kernel] [k] _raw_spin_lock | --- _raw_spin_lock | |--66.59%-- res_counter_uncharge_until | res_counter_uncharge | uncharge_batch | uncharge_list | mem_cgroup_uncharge_list | release_pages | free_pages_and_swap_cache | tlb_flush_mmu_free | | | |--90.12%-- unmap_single_vma | | unmap_vmas | | unmap_region | | do_munmap | | vm_munmap | | sys_munmap | | system_call_fastpath | | __GI___munmap | | | --9.88%-- tlb_flush_mmu | tlb_finish_mmu | unmap_region | do_munmap | vm_munmap | sys_munmap | system_call_fastpath | __GI___munmap In his case the load was running in the root memcg and that part has been handled by reverting 05b843012335 ("mm: memcontrol: use root_mem_cgroup res_counter") because this is a clear regression, but the problem remains inside dedicated memcgs. There is no reason to limit release_pages to PAGEVEC_SIZE batches other than lru_lock held times. This logic, however, can be moved inside the function. mem_cgroup_uncharge_list and free_hot_cold_page_list do not hold any lock for the whole pages_to_free list so it is safe to call them in a single run. The release_pages() code was previously breaking the lru_lock each PAGEVEC_SIZE pages (ie, 14 pages). However this code has no usage of pagevecs so switch to breaking the lock at least every SWAP_CLUSTER_MAX (32) pages. This means that the lock acquisition frequency is approximately halved and the max hold times are approximately doubled. The now unneeded batching is removed from free_pages_and_swap_cache(). Also update the grossly out-of-date release_pages documentation. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Dave Hansen <dave@sr71.net> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:28:52 +00:00
lock_batch = 0;
del_page_from_lru_list(page, lruvec);
__clear_page_lru_flags(page);
}
mm/munlock: replace clear_page_mlock() by final clearance Placing munlock_vma_page() at the end of page_remove_rmap() shifts most of the munlocking to clear_page_mlock(), since PageMlocked is typically still set when mapcount has fallen to 0. That is not what we want: we want /proc/vmstat's unevictable_pgs_cleared to remain as a useful check on the integrity of of the mlock/munlock protocol - small numbers are not surprising, but big numbers mean the protocol is not working. That could be easily fixed by placing munlock_vma_page() at the start of page_remove_rmap(); but later in the series we shall want to batch the munlocking, and that too would tend to leave PageMlocked still set at the point when it is checked. So delete clear_page_mlock() now: leave it instead to release_pages() (and __page_cache_release()) to do this backstop clearing of Mlocked, when page refcount has fallen to 0. If a pinned page occasionally gets counted as Mlocked and Unevictable until it is unpinned, that's okay. A slightly regrettable side-effect of this change is that, since release_pages() and __page_cache_release() may be called at interrupt time, those places which update NR_MLOCK with interrupts enabled had better use mod_zone_page_state() than __mod_zone_page_state() (but holding the lruvec lock always has interrupts disabled). This change, forcing Mlocked off when refcount 0 instead of earlier when mapcount 0, is not fundamental: it can be reversed if performance or something else is found to suffer; but this is the easiest way to separate the stats - let's not complicate that without good reason. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:28:05 +00:00
/*
* In rare cases, when truncation or holepunching raced with
* munlock after VM_LOCKED was cleared, Mlocked may still be
* found set here. This does not indicate a problem, unless
* "unevictable_pgs_cleared" appears worryingly large.
*/
if (unlikely(PageMlocked(page))) {
__ClearPageMlocked(page);
dec_zone_page_state(page, NR_MLOCK);
count_vm_event(UNEVICTABLE_PGCLEARED);
}
list_add(&page->lru, &pages_to_free);
}
mm/lru: replace pgdat lru_lock with lruvec lock This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:29 +00:00
if (lruvec)
unlock_page_lruvec_irqrestore(lruvec, flags);
mem_cgroup_uncharge_list(&pages_to_free);
mm: remove cold parameter from free_hot_cold_page* Most callers users of free_hot_cold_page claim the pages being released are cache hot. The exception is the page reclaim paths where it is likely that enough pages will be freed in the near future that the per-cpu lists are going to be recycled and the cache hotness information is lost. As no one really cares about the hotness of pages being released to the allocator, just ditch the parameter. The APIs are renamed to indicate that it's no longer about hot/cold pages. It should also be less confusing as there are subtle differences between them. __free_pages drops a reference and frees a page when the refcount reaches zero. free_hot_cold_page handled pages whose refcount was already zero which is non-obvious from the name. free_unref_page should be more obvious. No performance impact is expected as the overhead is marginal. The parameter is removed simply because it is a bit stupid to have a useless parameter copied everywhere. [mgorman@techsingularity.net: add pages to head, not tail] Link: http://lkml.kernel.org/r/20171019154321.qtpzaeftoyyw4iey@techsingularity.net Link: http://lkml.kernel.org/r/20171018075952.10627-8-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:37:59 +00:00
free_unref_page_list(&pages_to_free);
}
EXPORT_SYMBOL(release_pages);
/*
* The pages which we're about to release may be in the deferred lru-addition
* queues. That would prevent them from really being freed right now. That's
* OK from a correctness point of view but is inefficient - those pages may be
* cache-warm and we want to give them back to the page allocator ASAP.
*
* So __pagevec_release() will drain those queues here. __pagevec_lru_add()
* and __pagevec_lru_add_active() call release_pages() directly to avoid
* mutual recursion.
*/
void __pagevec_release(struct pagevec *pvec)
{
if (!pvec->percpu_pvec_drained) {
mm: only drain per-cpu pagevecs once per pagevec usage When a pagevec is initialised on the stack, it is generally used multiple times over a range of pages, looking up entries and then releasing them. On each pagevec_release, the per-cpu deferred LRU pagevecs are drained on the grounds the page being released may be on those queues and the pages may be cache hot. In many cases only the first drain is necessary as it's unlikely that the range of pages being walked is racing against LRU addition. Even if there is such a race, the impact is marginal where as constantly redraining the lru pagevecs costs. This patch ensures that pagevec is only drained once in a given lifecycle without increasing the cache footprint of the pagevec structure. Only sparsetruncate tiny is shown here as large files have many exceptional entries and calls pagecache_release less frequently. sparsetruncate (tiny) 4.14.0-rc4 4.14.0-rc4 batchshadow-v1r1 onedrain-v1r1 Min Time 141.00 ( 0.00%) 141.00 ( 0.00%) 1st-qrtle Time 142.00 ( 0.00%) 142.00 ( 0.00%) 2nd-qrtle Time 142.00 ( 0.00%) 142.00 ( 0.00%) 3rd-qrtle Time 143.00 ( 0.00%) 143.00 ( 0.00%) Max-90% Time 144.00 ( 0.00%) 144.00 ( 0.00%) Max-95% Time 146.00 ( 0.00%) 145.00 ( 0.68%) Max-99% Time 198.00 ( 0.00%) 194.00 ( 2.02%) Max Time 254.00 ( 0.00%) 208.00 ( 18.11%) Amean Time 145.12 ( 0.00%) 144.30 ( 0.56%) Stddev Time 12.74 ( 0.00%) 9.62 ( 24.49%) Coeff Time 8.78 ( 0.00%) 6.67 ( 24.06%) Best99%Amean Time 144.29 ( 0.00%) 143.82 ( 0.32%) Best95%Amean Time 142.68 ( 0.00%) 142.31 ( 0.26%) Best90%Amean Time 142.52 ( 0.00%) 142.19 ( 0.24%) Best75%Amean Time 142.26 ( 0.00%) 141.98 ( 0.20%) Best50%Amean Time 141.90 ( 0.00%) 141.71 ( 0.13%) Best25%Amean Time 141.80 ( 0.00%) 141.43 ( 0.26%) The impact on bonnie is marginal and within the noise because a significant percentage of the file being truncated has been reclaimed and consists of shadow entries which reduce the hotness of the pagevec_release path. Link: http://lkml.kernel.org/r/20171018075952.10627-5-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:37:48 +00:00
lru_add_drain();
pvec->percpu_pvec_drained = true;
mm: only drain per-cpu pagevecs once per pagevec usage When a pagevec is initialised on the stack, it is generally used multiple times over a range of pages, looking up entries and then releasing them. On each pagevec_release, the per-cpu deferred LRU pagevecs are drained on the grounds the page being released may be on those queues and the pages may be cache hot. In many cases only the first drain is necessary as it's unlikely that the range of pages being walked is racing against LRU addition. Even if there is such a race, the impact is marginal where as constantly redraining the lru pagevecs costs. This patch ensures that pagevec is only drained once in a given lifecycle without increasing the cache footprint of the pagevec structure. Only sparsetruncate tiny is shown here as large files have many exceptional entries and calls pagecache_release less frequently. sparsetruncate (tiny) 4.14.0-rc4 4.14.0-rc4 batchshadow-v1r1 onedrain-v1r1 Min Time 141.00 ( 0.00%) 141.00 ( 0.00%) 1st-qrtle Time 142.00 ( 0.00%) 142.00 ( 0.00%) 2nd-qrtle Time 142.00 ( 0.00%) 142.00 ( 0.00%) 3rd-qrtle Time 143.00 ( 0.00%) 143.00 ( 0.00%) Max-90% Time 144.00 ( 0.00%) 144.00 ( 0.00%) Max-95% Time 146.00 ( 0.00%) 145.00 ( 0.68%) Max-99% Time 198.00 ( 0.00%) 194.00 ( 2.02%) Max Time 254.00 ( 0.00%) 208.00 ( 18.11%) Amean Time 145.12 ( 0.00%) 144.30 ( 0.56%) Stddev Time 12.74 ( 0.00%) 9.62 ( 24.49%) Coeff Time 8.78 ( 0.00%) 6.67 ( 24.06%) Best99%Amean Time 144.29 ( 0.00%) 143.82 ( 0.32%) Best95%Amean Time 142.68 ( 0.00%) 142.31 ( 0.26%) Best90%Amean Time 142.52 ( 0.00%) 142.19 ( 0.24%) Best75%Amean Time 142.26 ( 0.00%) 141.98 ( 0.20%) Best50%Amean Time 141.90 ( 0.00%) 141.71 ( 0.13%) Best25%Amean Time 141.80 ( 0.00%) 141.43 ( 0.26%) The impact on bonnie is marginal and within the noise because a significant percentage of the file being truncated has been reclaimed and consists of shadow entries which reduce the hotness of the pagevec_release path. Link: http://lkml.kernel.org/r/20171018075952.10627-5-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:37:48 +00:00
}
release_pages(pvec->pages, pagevec_count(pvec));
pagevec_reinit(pvec);
}
EXPORT_SYMBOL(__pagevec_release);
static void __pagevec_lru_add_fn(struct folio *folio, struct lruvec *lruvec)
{
int was_unevictable = folio_test_clear_unevictable(folio);
long nr_pages = folio_nr_pages(folio);
VM_BUG_ON_FOLIO(folio_test_lru(folio), folio);
folio_set_lru(folio);
mm, mlock, vmscan: no more skipping pagevecs When a thread mlocks an address space backed either by file pages which are currently not present in memory or swapped out anon pages (not in swapcache), a new page is allocated and added to the local pagevec (lru_add_pvec), I/O is triggered and the thread then sleeps on the page. On I/O completion, the thread can wake on a different CPU, the mlock syscall will then sets the PageMlocked() bit of the page but will not be able to put that page in unevictable LRU as the page is on the pagevec of a different CPU. Even on drain, that page will go to evictable LRU because the PageMlocked() bit is not checked on pagevec drain. The page will eventually go to right LRU on reclaim but the LRU stats will remain skewed for a long time. This patch puts all the pages, even unevictable, to the pagevecs and on the drain, the pages will be added on their LRUs correctly by checking their evictability. This resolves the mlocked pages on pagevec of other CPUs issue because when those pagevecs will be drained, the mlocked file pages will go to unevictable LRU. Also this makes the race with munlock easier to resolve because the pagevec drains happen in LRU lock. However there is still one place which makes a page evictable and does PageLRU check on that page without LRU lock and needs special attention. TestClearPageMlocked() and isolate_lru_page() in clear_page_mlock(). #0: __pagevec_lru_add_fn #1: clear_page_mlock SetPageLRU() if (!TestClearPageMlocked()) return smp_mb() // <--required // inside does PageLRU if (!PageMlocked()) if (isolate_lru_page()) move to evictable LRU putback_lru_page() else move to unevictable LRU In '#1', TestClearPageMlocked() provides full memory barrier semantics and thus the PageLRU check (inside isolate_lru_page) can not be reordered before it. In '#0', without explicit memory barrier, the PageMlocked() check can be reordered before SetPageLRU(). If that happens, '#0' can put a page in unevictable LRU and '#1' might have just cleared the Mlocked bit of that page but fails to isolate as PageLRU fails as '#0' still hasn't set PageLRU bit of that page. That page will be stranded on the unevictable LRU. There is one (good) side effect though. Without this patch, the pages allocated for System V shared memory segment are added to evictable LRUs even after shmctl(SHM_LOCK) on that segment. This patch will correctly put such pages to unevictable LRU. Link: http://lkml.kernel.org/r/20171121211241.18877-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Jan Kara <jack@suse.cz> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-21 22:45:28 +00:00
/*
* Is an smp_mb__after_atomic() still required here, before
* folio_evictable() tests PageMlocked, to rule out the possibility
* of stranding an evictable folio on an unevictable LRU? I think
mm/munlock: mlock_page() munlock_page() batch by pagevec A weakness of the page->mlock_count approach is the need for lruvec lock while holding page table lock. That is not an overhead we would allow on normal pages, but I think acceptable just for pages in an mlocked area. But let's try to amortize the extra cost by gathering on per-cpu pagevec before acquiring the lruvec lock. I have an unverified conjecture that the mlock pagevec might work out well for delaying the mlock processing of new file pages until they have got off lru_cache_add()'s pagevec and on to LRU. The initialization of page->mlock_count is subject to races and awkward: 0 or !!PageMlocked or 1? Was it wrong even in the implementation before this commit, which just widens the window? I haven't gone back to think it through. Maybe someone can point out a better way to initialize it. Bringing lru_cache_add_inactive_or_unevictable()'s mlock initialization into mm/mlock.c has helped: mlock_new_page(), using the mlock pagevec, rather than lru_cache_add()'s pagevec. Experimented with various orderings: the right thing seems to be for mlock_page() and mlock_new_page() to TestSetPageMlocked before adding to pagevec, but munlock_page() to leave TestClearPageMlocked to the later pagevec processing. Dropped the VM_BUG_ON_PAGE(PageTail)s this time around: they have made their point, and the thp_nr_page()s already contain a VM_BUG_ON_PGFLAGS() for that. This still leaves acquiring lruvec locks under page table lock each time the pagevec fills (or a THP is added): which I suppose is rather silly, since they sit on pagevec waiting to be processed long after page table lock has been dropped; but I'm disinclined to uglify the calling sequence until some load shows an actual problem with it (nothing wrong with taking lruvec lock under page table lock, just "nicer" to do it less). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:37:29 +00:00
* not, because __munlock_page() only clears PageMlocked while the LRU
* lock is held.
mm, mlock, vmscan: no more skipping pagevecs When a thread mlocks an address space backed either by file pages which are currently not present in memory or swapped out anon pages (not in swapcache), a new page is allocated and added to the local pagevec (lru_add_pvec), I/O is triggered and the thread then sleeps on the page. On I/O completion, the thread can wake on a different CPU, the mlock syscall will then sets the PageMlocked() bit of the page but will not be able to put that page in unevictable LRU as the page is on the pagevec of a different CPU. Even on drain, that page will go to evictable LRU because the PageMlocked() bit is not checked on pagevec drain. The page will eventually go to right LRU on reclaim but the LRU stats will remain skewed for a long time. This patch puts all the pages, even unevictable, to the pagevecs and on the drain, the pages will be added on their LRUs correctly by checking their evictability. This resolves the mlocked pages on pagevec of other CPUs issue because when those pagevecs will be drained, the mlocked file pages will go to unevictable LRU. Also this makes the race with munlock easier to resolve because the pagevec drains happen in LRU lock. However there is still one place which makes a page evictable and does PageLRU check on that page without LRU lock and needs special attention. TestClearPageMlocked() and isolate_lru_page() in clear_page_mlock(). #0: __pagevec_lru_add_fn #1: clear_page_mlock SetPageLRU() if (!TestClearPageMlocked()) return smp_mb() // <--required // inside does PageLRU if (!PageMlocked()) if (isolate_lru_page()) move to evictable LRU putback_lru_page() else move to unevictable LRU In '#1', TestClearPageMlocked() provides full memory barrier semantics and thus the PageLRU check (inside isolate_lru_page) can not be reordered before it. In '#0', without explicit memory barrier, the PageMlocked() check can be reordered before SetPageLRU(). If that happens, '#0' can put a page in unevictable LRU and '#1' might have just cleared the Mlocked bit of that page but fails to isolate as PageLRU fails as '#0' still hasn't set PageLRU bit of that page. That page will be stranded on the unevictable LRU. There is one (good) side effect though. Without this patch, the pages allocated for System V shared memory segment are added to evictable LRUs even after shmctl(SHM_LOCK) on that segment. This patch will correctly put such pages to unevictable LRU. Link: http://lkml.kernel.org/r/20171121211241.18877-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Jan Kara <jack@suse.cz> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-21 22:45:28 +00:00
*
* (That is not true of __page_cache_release(), and not necessarily
* true of release_pages(): but those only clear PageMlocked after
* put_page_testzero() has excluded any other users of the page.)
mm, mlock, vmscan: no more skipping pagevecs When a thread mlocks an address space backed either by file pages which are currently not present in memory or swapped out anon pages (not in swapcache), a new page is allocated and added to the local pagevec (lru_add_pvec), I/O is triggered and the thread then sleeps on the page. On I/O completion, the thread can wake on a different CPU, the mlock syscall will then sets the PageMlocked() bit of the page but will not be able to put that page in unevictable LRU as the page is on the pagevec of a different CPU. Even on drain, that page will go to evictable LRU because the PageMlocked() bit is not checked on pagevec drain. The page will eventually go to right LRU on reclaim but the LRU stats will remain skewed for a long time. This patch puts all the pages, even unevictable, to the pagevecs and on the drain, the pages will be added on their LRUs correctly by checking their evictability. This resolves the mlocked pages on pagevec of other CPUs issue because when those pagevecs will be drained, the mlocked file pages will go to unevictable LRU. Also this makes the race with munlock easier to resolve because the pagevec drains happen in LRU lock. However there is still one place which makes a page evictable and does PageLRU check on that page without LRU lock and needs special attention. TestClearPageMlocked() and isolate_lru_page() in clear_page_mlock(). #0: __pagevec_lru_add_fn #1: clear_page_mlock SetPageLRU() if (!TestClearPageMlocked()) return smp_mb() // <--required // inside does PageLRU if (!PageMlocked()) if (isolate_lru_page()) move to evictable LRU putback_lru_page() else move to unevictable LRU In '#1', TestClearPageMlocked() provides full memory barrier semantics and thus the PageLRU check (inside isolate_lru_page) can not be reordered before it. In '#0', without explicit memory barrier, the PageMlocked() check can be reordered before SetPageLRU(). If that happens, '#0' can put a page in unevictable LRU and '#1' might have just cleared the Mlocked bit of that page but fails to isolate as PageLRU fails as '#0' still hasn't set PageLRU bit of that page. That page will be stranded on the unevictable LRU. There is one (good) side effect though. Without this patch, the pages allocated for System V shared memory segment are added to evictable LRUs even after shmctl(SHM_LOCK) on that segment. This patch will correctly put such pages to unevictable LRU. Link: http://lkml.kernel.org/r/20171121211241.18877-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Jan Kara <jack@suse.cz> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-21 22:45:28 +00:00
*/
if (folio_evictable(folio)) {
mm, mlock, vmscan: no more skipping pagevecs When a thread mlocks an address space backed either by file pages which are currently not present in memory or swapped out anon pages (not in swapcache), a new page is allocated and added to the local pagevec (lru_add_pvec), I/O is triggered and the thread then sleeps on the page. On I/O completion, the thread can wake on a different CPU, the mlock syscall will then sets the PageMlocked() bit of the page but will not be able to put that page in unevictable LRU as the page is on the pagevec of a different CPU. Even on drain, that page will go to evictable LRU because the PageMlocked() bit is not checked on pagevec drain. The page will eventually go to right LRU on reclaim but the LRU stats will remain skewed for a long time. This patch puts all the pages, even unevictable, to the pagevecs and on the drain, the pages will be added on their LRUs correctly by checking their evictability. This resolves the mlocked pages on pagevec of other CPUs issue because when those pagevecs will be drained, the mlocked file pages will go to unevictable LRU. Also this makes the race with munlock easier to resolve because the pagevec drains happen in LRU lock. However there is still one place which makes a page evictable and does PageLRU check on that page without LRU lock and needs special attention. TestClearPageMlocked() and isolate_lru_page() in clear_page_mlock(). #0: __pagevec_lru_add_fn #1: clear_page_mlock SetPageLRU() if (!TestClearPageMlocked()) return smp_mb() // <--required // inside does PageLRU if (!PageMlocked()) if (isolate_lru_page()) move to evictable LRU putback_lru_page() else move to unevictable LRU In '#1', TestClearPageMlocked() provides full memory barrier semantics and thus the PageLRU check (inside isolate_lru_page) can not be reordered before it. In '#0', without explicit memory barrier, the PageMlocked() check can be reordered before SetPageLRU(). If that happens, '#0' can put a page in unevictable LRU and '#1' might have just cleared the Mlocked bit of that page but fails to isolate as PageLRU fails as '#0' still hasn't set PageLRU bit of that page. That page will be stranded on the unevictable LRU. There is one (good) side effect though. Without this patch, the pages allocated for System V shared memory segment are added to evictable LRUs even after shmctl(SHM_LOCK) on that segment. This patch will correctly put such pages to unevictable LRU. Link: http://lkml.kernel.org/r/20171121211241.18877-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Jan Kara <jack@suse.cz> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-21 22:45:28 +00:00
if (was_unevictable)
__count_vm_events(UNEVICTABLE_PGRESCUED, nr_pages);
mm, mlock, vmscan: no more skipping pagevecs When a thread mlocks an address space backed either by file pages which are currently not present in memory or swapped out anon pages (not in swapcache), a new page is allocated and added to the local pagevec (lru_add_pvec), I/O is triggered and the thread then sleeps on the page. On I/O completion, the thread can wake on a different CPU, the mlock syscall will then sets the PageMlocked() bit of the page but will not be able to put that page in unevictable LRU as the page is on the pagevec of a different CPU. Even on drain, that page will go to evictable LRU because the PageMlocked() bit is not checked on pagevec drain. The page will eventually go to right LRU on reclaim but the LRU stats will remain skewed for a long time. This patch puts all the pages, even unevictable, to the pagevecs and on the drain, the pages will be added on their LRUs correctly by checking their evictability. This resolves the mlocked pages on pagevec of other CPUs issue because when those pagevecs will be drained, the mlocked file pages will go to unevictable LRU. Also this makes the race with munlock easier to resolve because the pagevec drains happen in LRU lock. However there is still one place which makes a page evictable and does PageLRU check on that page without LRU lock and needs special attention. TestClearPageMlocked() and isolate_lru_page() in clear_page_mlock(). #0: __pagevec_lru_add_fn #1: clear_page_mlock SetPageLRU() if (!TestClearPageMlocked()) return smp_mb() // <--required // inside does PageLRU if (!PageMlocked()) if (isolate_lru_page()) move to evictable LRU putback_lru_page() else move to unevictable LRU In '#1', TestClearPageMlocked() provides full memory barrier semantics and thus the PageLRU check (inside isolate_lru_page) can not be reordered before it. In '#0', without explicit memory barrier, the PageMlocked() check can be reordered before SetPageLRU(). If that happens, '#0' can put a page in unevictable LRU and '#1' might have just cleared the Mlocked bit of that page but fails to isolate as PageLRU fails as '#0' still hasn't set PageLRU bit of that page. That page will be stranded on the unevictable LRU. There is one (good) side effect though. Without this patch, the pages allocated for System V shared memory segment are added to evictable LRUs even after shmctl(SHM_LOCK) on that segment. This patch will correctly put such pages to unevictable LRU. Link: http://lkml.kernel.org/r/20171121211241.18877-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Jan Kara <jack@suse.cz> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-21 22:45:28 +00:00
} else {
folio_clear_active(folio);
folio_set_unevictable(folio);
mm/munlock: mlock_page() munlock_page() batch by pagevec A weakness of the page->mlock_count approach is the need for lruvec lock while holding page table lock. That is not an overhead we would allow on normal pages, but I think acceptable just for pages in an mlocked area. But let's try to amortize the extra cost by gathering on per-cpu pagevec before acquiring the lruvec lock. I have an unverified conjecture that the mlock pagevec might work out well for delaying the mlock processing of new file pages until they have got off lru_cache_add()'s pagevec and on to LRU. The initialization of page->mlock_count is subject to races and awkward: 0 or !!PageMlocked or 1? Was it wrong even in the implementation before this commit, which just widens the window? I haven't gone back to think it through. Maybe someone can point out a better way to initialize it. Bringing lru_cache_add_inactive_or_unevictable()'s mlock initialization into mm/mlock.c has helped: mlock_new_page(), using the mlock pagevec, rather than lru_cache_add()'s pagevec. Experimented with various orderings: the right thing seems to be for mlock_page() and mlock_new_page() to TestSetPageMlocked before adding to pagevec, but munlock_page() to leave TestClearPageMlocked to the later pagevec processing. Dropped the VM_BUG_ON_PAGE(PageTail)s this time around: they have made their point, and the thp_nr_page()s already contain a VM_BUG_ON_PGFLAGS() for that. This still leaves acquiring lruvec locks under page table lock each time the pagevec fills (or a THP is added): which I suppose is rather silly, since they sit on pagevec waiting to be processed long after page table lock has been dropped; but I'm disinclined to uglify the calling sequence until some load shows an actual problem with it (nothing wrong with taking lruvec lock under page table lock, just "nicer" to do it less). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:37:29 +00:00
/*
* folio->mlock_count = !!folio_test_mlocked(folio)?
* But that leaves __mlock_page() in doubt whether another
* actor has already counted the mlock or not. Err on the
* safe side, underestimate, let page reclaim fix it, rather
* than leaving a page on the unevictable LRU indefinitely.
*/
folio->mlock_count = 0;
mm, mlock, vmscan: no more skipping pagevecs When a thread mlocks an address space backed either by file pages which are currently not present in memory or swapped out anon pages (not in swapcache), a new page is allocated and added to the local pagevec (lru_add_pvec), I/O is triggered and the thread then sleeps on the page. On I/O completion, the thread can wake on a different CPU, the mlock syscall will then sets the PageMlocked() bit of the page but will not be able to put that page in unevictable LRU as the page is on the pagevec of a different CPU. Even on drain, that page will go to evictable LRU because the PageMlocked() bit is not checked on pagevec drain. The page will eventually go to right LRU on reclaim but the LRU stats will remain skewed for a long time. This patch puts all the pages, even unevictable, to the pagevecs and on the drain, the pages will be added on their LRUs correctly by checking their evictability. This resolves the mlocked pages on pagevec of other CPUs issue because when those pagevecs will be drained, the mlocked file pages will go to unevictable LRU. Also this makes the race with munlock easier to resolve because the pagevec drains happen in LRU lock. However there is still one place which makes a page evictable and does PageLRU check on that page without LRU lock and needs special attention. TestClearPageMlocked() and isolate_lru_page() in clear_page_mlock(). #0: __pagevec_lru_add_fn #1: clear_page_mlock SetPageLRU() if (!TestClearPageMlocked()) return smp_mb() // <--required // inside does PageLRU if (!PageMlocked()) if (isolate_lru_page()) move to evictable LRU putback_lru_page() else move to unevictable LRU In '#1', TestClearPageMlocked() provides full memory barrier semantics and thus the PageLRU check (inside isolate_lru_page) can not be reordered before it. In '#0', without explicit memory barrier, the PageMlocked() check can be reordered before SetPageLRU(). If that happens, '#0' can put a page in unevictable LRU and '#1' might have just cleared the Mlocked bit of that page but fails to isolate as PageLRU fails as '#0' still hasn't set PageLRU bit of that page. That page will be stranded on the unevictable LRU. There is one (good) side effect though. Without this patch, the pages allocated for System V shared memory segment are added to evictable LRUs even after shmctl(SHM_LOCK) on that segment. This patch will correctly put such pages to unevictable LRU. Link: http://lkml.kernel.org/r/20171121211241.18877-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Jan Kara <jack@suse.cz> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-21 22:45:28 +00:00
if (!was_unevictable)
__count_vm_events(UNEVICTABLE_PGCULLED, nr_pages);
mm, mlock, vmscan: no more skipping pagevecs When a thread mlocks an address space backed either by file pages which are currently not present in memory or swapped out anon pages (not in swapcache), a new page is allocated and added to the local pagevec (lru_add_pvec), I/O is triggered and the thread then sleeps on the page. On I/O completion, the thread can wake on a different CPU, the mlock syscall will then sets the PageMlocked() bit of the page but will not be able to put that page in unevictable LRU as the page is on the pagevec of a different CPU. Even on drain, that page will go to evictable LRU because the PageMlocked() bit is not checked on pagevec drain. The page will eventually go to right LRU on reclaim but the LRU stats will remain skewed for a long time. This patch puts all the pages, even unevictable, to the pagevecs and on the drain, the pages will be added on their LRUs correctly by checking their evictability. This resolves the mlocked pages on pagevec of other CPUs issue because when those pagevecs will be drained, the mlocked file pages will go to unevictable LRU. Also this makes the race with munlock easier to resolve because the pagevec drains happen in LRU lock. However there is still one place which makes a page evictable and does PageLRU check on that page without LRU lock and needs special attention. TestClearPageMlocked() and isolate_lru_page() in clear_page_mlock(). #0: __pagevec_lru_add_fn #1: clear_page_mlock SetPageLRU() if (!TestClearPageMlocked()) return smp_mb() // <--required // inside does PageLRU if (!PageMlocked()) if (isolate_lru_page()) move to evictable LRU putback_lru_page() else move to unevictable LRU In '#1', TestClearPageMlocked() provides full memory barrier semantics and thus the PageLRU check (inside isolate_lru_page) can not be reordered before it. In '#0', without explicit memory barrier, the PageMlocked() check can be reordered before SetPageLRU(). If that happens, '#0' can put a page in unevictable LRU and '#1' might have just cleared the Mlocked bit of that page but fails to isolate as PageLRU fails as '#0' still hasn't set PageLRU bit of that page. That page will be stranded on the unevictable LRU. There is one (good) side effect though. Without this patch, the pages allocated for System V shared memory segment are added to evictable LRUs even after shmctl(SHM_LOCK) on that segment. This patch will correctly put such pages to unevictable LRU. Link: http://lkml.kernel.org/r/20171121211241.18877-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Jan Kara <jack@suse.cz> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-21 22:45:28 +00:00
}
lruvec_add_folio(lruvec, folio);
trace_mm_lru_insertion(folio);
}
/*
* Add the passed pages to the LRU, then drop the caller's refcount
* on them. Reinitialises the caller's pagevec.
*/
void __pagevec_lru_add(struct pagevec *pvec)
{
mm/swap.c: serialize memcg changes in pagevec_lru_move_fn Hugh Dickins' found a memcg change bug on original version: If we want to change the pgdat->lru_lock to memcg's lruvec lock, we have to serialize mem_cgroup_move_account during pagevec_lru_move_fn. The possible bad scenario would like: cpu 0 cpu 1 lruvec = mem_cgroup_page_lruvec() if (!isolate_lru_page()) mem_cgroup_move_account spin_lock_irqsave(&lruvec->lru_lock <== wrong lock. So we need TestClearPageLRU to block isolate_lru_page(), that serializes the memcg change. and then removing the PageLRU check in move_fn callee as the consequence. __pagevec_lru_add_fn() is different from the others, because the pages it deals with are, by definition, not yet on the lru. TestClearPageLRU is not needed and would not work, so __pagevec_lru_add() goes its own way. Link: https://lkml.kernel.org/r/1604566549-62481-17-git-send-email-alex.shi@linux.alibaba.com Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:25 +00:00
int i;
mm/lru: replace pgdat lru_lock with lruvec lock This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:29 +00:00
struct lruvec *lruvec = NULL;
mm/swap.c: serialize memcg changes in pagevec_lru_move_fn Hugh Dickins' found a memcg change bug on original version: If we want to change the pgdat->lru_lock to memcg's lruvec lock, we have to serialize mem_cgroup_move_account during pagevec_lru_move_fn. The possible bad scenario would like: cpu 0 cpu 1 lruvec = mem_cgroup_page_lruvec() if (!isolate_lru_page()) mem_cgroup_move_account spin_lock_irqsave(&lruvec->lru_lock <== wrong lock. So we need TestClearPageLRU to block isolate_lru_page(), that serializes the memcg change. and then removing the PageLRU check in move_fn callee as the consequence. __pagevec_lru_add_fn() is different from the others, because the pages it deals with are, by definition, not yet on the lru. TestClearPageLRU is not needed and would not work, so __pagevec_lru_add() goes its own way. Link: https://lkml.kernel.org/r/1604566549-62481-17-git-send-email-alex.shi@linux.alibaba.com Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:25 +00:00
unsigned long flags = 0;
for (i = 0; i < pagevec_count(pvec); i++) {
struct folio *folio = page_folio(pvec->pages[i]);
mm/swap.c: serialize memcg changes in pagevec_lru_move_fn Hugh Dickins' found a memcg change bug on original version: If we want to change the pgdat->lru_lock to memcg's lruvec lock, we have to serialize mem_cgroup_move_account during pagevec_lru_move_fn. The possible bad scenario would like: cpu 0 cpu 1 lruvec = mem_cgroup_page_lruvec() if (!isolate_lru_page()) mem_cgroup_move_account spin_lock_irqsave(&lruvec->lru_lock <== wrong lock. So we need TestClearPageLRU to block isolate_lru_page(), that serializes the memcg change. and then removing the PageLRU check in move_fn callee as the consequence. __pagevec_lru_add_fn() is different from the others, because the pages it deals with are, by definition, not yet on the lru. TestClearPageLRU is not needed and would not work, so __pagevec_lru_add() goes its own way. Link: https://lkml.kernel.org/r/1604566549-62481-17-git-send-email-alex.shi@linux.alibaba.com Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:25 +00:00
lruvec = folio_lruvec_relock_irqsave(folio, lruvec, &flags);
__pagevec_lru_add_fn(folio, lruvec);
mm/swap.c: serialize memcg changes in pagevec_lru_move_fn Hugh Dickins' found a memcg change bug on original version: If we want to change the pgdat->lru_lock to memcg's lruvec lock, we have to serialize mem_cgroup_move_account during pagevec_lru_move_fn. The possible bad scenario would like: cpu 0 cpu 1 lruvec = mem_cgroup_page_lruvec() if (!isolate_lru_page()) mem_cgroup_move_account spin_lock_irqsave(&lruvec->lru_lock <== wrong lock. So we need TestClearPageLRU to block isolate_lru_page(), that serializes the memcg change. and then removing the PageLRU check in move_fn callee as the consequence. __pagevec_lru_add_fn() is different from the others, because the pages it deals with are, by definition, not yet on the lru. TestClearPageLRU is not needed and would not work, so __pagevec_lru_add() goes its own way. Link: https://lkml.kernel.org/r/1604566549-62481-17-git-send-email-alex.shi@linux.alibaba.com Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:25 +00:00
}
mm/lru: replace pgdat lru_lock with lruvec lock This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:29 +00:00
if (lruvec)
unlock_page_lruvec_irqrestore(lruvec, flags);
mm/swap.c: serialize memcg changes in pagevec_lru_move_fn Hugh Dickins' found a memcg change bug on original version: If we want to change the pgdat->lru_lock to memcg's lruvec lock, we have to serialize mem_cgroup_move_account during pagevec_lru_move_fn. The possible bad scenario would like: cpu 0 cpu 1 lruvec = mem_cgroup_page_lruvec() if (!isolate_lru_page()) mem_cgroup_move_account spin_lock_irqsave(&lruvec->lru_lock <== wrong lock. So we need TestClearPageLRU to block isolate_lru_page(), that serializes the memcg change. and then removing the PageLRU check in move_fn callee as the consequence. __pagevec_lru_add_fn() is different from the others, because the pages it deals with are, by definition, not yet on the lru. TestClearPageLRU is not needed and would not work, so __pagevec_lru_add() goes its own way. Link: https://lkml.kernel.org/r/1604566549-62481-17-git-send-email-alex.shi@linux.alibaba.com Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:34:25 +00:00
release_pages(pvec->pages, pvec->nr);
pagevec_reinit(pvec);
}
2014-04-03 21:47:46 +00:00
/**
* folio_batch_remove_exceptionals() - Prune non-folios from a batch.
* @fbatch: The batch to prune
2014-04-03 21:47:46 +00:00
*
* find_get_entries() fills a batch with both folios and shadow/swap/DAX
* entries. This function prunes all the non-folio entries from @fbatch
* without leaving holes, so that it can be passed on to folio-only batch
* operations.
2014-04-03 21:47:46 +00:00
*/
void folio_batch_remove_exceptionals(struct folio_batch *fbatch)
2014-04-03 21:47:46 +00:00
{
unsigned int i, j;
2014-04-03 21:47:46 +00:00
for (i = 0, j = 0; i < folio_batch_count(fbatch); i++) {
struct folio *folio = fbatch->folios[i];
if (!xa_is_value(folio))
fbatch->folios[j++] = folio;
2014-04-03 21:47:46 +00:00
}
fbatch->nr = j;
2014-04-03 21:47:46 +00:00
}
/**
* pagevec_lookup_range - gang pagecache lookup
* @pvec: Where the resulting pages are placed
* @mapping: The address_space to search
* @start: The starting page index
* @end: The final page index
*
* pagevec_lookup_range() will search for & return a group of up to PAGEVEC_SIZE
* pages in the mapping starting from index @start and upto index @end
* (inclusive). The pages are placed in @pvec. pagevec_lookup() takes a
* reference against the pages in @pvec.
*
* The search returns a group of mapping-contiguous pages with ascending
* indexes. There may be holes in the indices due to not-present pages. We
* also update @start to index the next page for the traversal.
*
* pagevec_lookup_range() returns the number of pages which were found. If this
* number is smaller than PAGEVEC_SIZE, the end of specified range has been
* reached.
*/
unsigned pagevec_lookup_range(struct pagevec *pvec,
struct address_space *mapping, pgoff_t *start, pgoff_t end)
{
pvec->nr = find_get_pages_range(mapping, start, end, PAGEVEC_SIZE,
pvec->pages);
return pagevec_count(pvec);
}
EXPORT_SYMBOL(pagevec_lookup_range);
unsigned pagevec_lookup_range_tag(struct pagevec *pvec,
struct address_space *mapping, pgoff_t *index, pgoff_t end,
xa_mark_t tag)
{
pvec->nr = find_get_pages_range_tag(mapping, index, end, tag,
PAGEVEC_SIZE, pvec->pages);
return pagevec_count(pvec);
}
EXPORT_SYMBOL(pagevec_lookup_range_tag);
/*
* Perform any setup for the swap system
*/
void __init swap_setup(void)
{
unsigned long megs = totalram_pages() >> (20 - PAGE_SHIFT);
/* Use a smaller cluster for small-memory machines */
if (megs < 16)
page_cluster = 2;
else
page_cluster = 3;
/*
* Right now other parts of the system means that we
* _really_ don't want to cluster much more
*/
}