linux-stable/arch/s390/kernel/ftrace.c

409 lines
10 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* Dynamic function tracer architecture backend.
*
* Copyright IBM Corp. 2009,2014
*
* Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
* Martin Schwidefsky <schwidefsky@de.ibm.com>
*/
s390/ftrace,kprobes: allow to patch first instruction If the function tracer is enabled, allow to set kprobes on the first instruction of a function (which is the function trace caller): If no kprobe is set handling of enabling and disabling function tracing of a function simply patches the first instruction. Either it is a nop (right now it's an unconditional branch, which skips the mcount block), or it's a branch to the ftrace_caller() function. If a kprobe is being placed on a function tracer calling instruction we encode if we actually have a nop or branch in the remaining bytes after the breakpoint instruction (illegal opcode). This is possible, since the size of the instruction used for the nop and branch is six bytes, while the size of the breakpoint is only two bytes. Therefore the first two bytes contain the illegal opcode and the last four bytes contain either "0" for nop or "1" for branch. The kprobes code will then execute/simulate the correct instruction. Instruction patching for kprobes and function tracer is always done with stop_machine(). Therefore we don't have any races where an instruction is patched concurrently on a different cpu. Besides that also the program check handler which executes the function trace caller instruction won't be executed concurrently to any stop_machine() execution. This allows to keep full fault based kprobes handling which generates correct pt_regs contents automatically. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-15 10:17:38 +00:00
#include <linux/moduleloader.h>
#include <linux/hardirq.h>
#include <linux/uaccess.h>
#include <linux/ftrace.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/kprobes.h>
#include <trace/syscall.h>
#include <asm/asm-offsets.h>
s390/ftrace,kprobes: allow to patch first instruction If the function tracer is enabled, allow to set kprobes on the first instruction of a function (which is the function trace caller): If no kprobe is set handling of enabling and disabling function tracing of a function simply patches the first instruction. Either it is a nop (right now it's an unconditional branch, which skips the mcount block), or it's a branch to the ftrace_caller() function. If a kprobe is being placed on a function tracer calling instruction we encode if we actually have a nop or branch in the remaining bytes after the breakpoint instruction (illegal opcode). This is possible, since the size of the instruction used for the nop and branch is six bytes, while the size of the breakpoint is only two bytes. Therefore the first two bytes contain the illegal opcode and the last four bytes contain either "0" for nop or "1" for branch. The kprobes code will then execute/simulate the correct instruction. Instruction patching for kprobes and function tracer is always done with stop_machine(). Therefore we don't have any races where an instruction is patched concurrently on a different cpu. Besides that also the program check handler which executes the function trace caller instruction won't be executed concurrently to any stop_machine() execution. This allows to keep full fault based kprobes handling which generates correct pt_regs contents automatically. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-15 10:17:38 +00:00
#include <asm/cacheflush.h>
s390/ftrace: implement hotpatching s390 allows hotpatching the mask of a conditional jump instruction. Make use of this feature in order to avoid the expensive stop_machine() call. The new trampolines are split in 3 stages: - A first stage is a 6-byte relative conditional long branch located at each function's entry point. Its offset always points to the second stage for the corresponding function, and its mask is either all 0s (ftrace off) or all 1s (ftrace on). The code for flipping the mask is borrowed from ftrace_{enable,disable}_ftrace_graph_caller. After flipping, ftrace_arch_code_modify_post_process() syncs with all the other CPUs by sending SIGPs. - Second stages for vmlinux are stored in a separate part of the .text section reserved by the linker script, and in dynamically allocated memory for modules. This prevents the icache pollution. The total size of second stages is about 1.5% of that of the kernel image. Putting second stages in the .bss section is possible and decreases the size of the non-compressed vmlinux, but splits the kernel 1:1 mapping, which is a bad tradeoff. Each second stage contains a call to the third stage, a pointer to the part of the intercepted function right after the first stage, and a pointer to an interceptor function (e.g. ftrace_caller). Second stages are 8-byte aligned for the future direct calls implementation. - There are only two copies of the third stage: in the .text section for vmlinux and in dynamically allocated memory for modules. It can be an expoline, which is relatively large, so inlining it into each second stage is prohibitively expensive. As a result of this organization, phoronix-test-suite with ftrace off does not show any performance degradation. Suggested-by: Sven Schnelle <svens@linux.ibm.com> Suggested-by: Vasily Gorbik <gor@linux.ibm.com> Co-developed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20210728212546.128248-3-iii@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-28 21:25:46 +00:00
#include <asm/ftrace.lds.h>
#include <asm/nospec-branch.h>
#include <asm/set_memory.h>
#include "entry.h"
s390/ftrace: implement hotpatching s390 allows hotpatching the mask of a conditional jump instruction. Make use of this feature in order to avoid the expensive stop_machine() call. The new trampolines are split in 3 stages: - A first stage is a 6-byte relative conditional long branch located at each function's entry point. Its offset always points to the second stage for the corresponding function, and its mask is either all 0s (ftrace off) or all 1s (ftrace on). The code for flipping the mask is borrowed from ftrace_{enable,disable}_ftrace_graph_caller. After flipping, ftrace_arch_code_modify_post_process() syncs with all the other CPUs by sending SIGPs. - Second stages for vmlinux are stored in a separate part of the .text section reserved by the linker script, and in dynamically allocated memory for modules. This prevents the icache pollution. The total size of second stages is about 1.5% of that of the kernel image. Putting second stages in the .bss section is possible and decreases the size of the non-compressed vmlinux, but splits the kernel 1:1 mapping, which is a bad tradeoff. Each second stage contains a call to the third stage, a pointer to the part of the intercepted function right after the first stage, and a pointer to an interceptor function (e.g. ftrace_caller). Second stages are 8-byte aligned for the future direct calls implementation. - There are only two copies of the third stage: in the .text section for vmlinux and in dynamically allocated memory for modules. It can be an expoline, which is relatively large, so inlining it into each second stage is prohibitively expensive. As a result of this organization, phoronix-test-suite with ftrace off does not show any performance degradation. Suggested-by: Sven Schnelle <svens@linux.ibm.com> Suggested-by: Vasily Gorbik <gor@linux.ibm.com> Co-developed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20210728212546.128248-3-iii@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-28 21:25:46 +00:00
#include "ftrace.h"
/*
* To generate function prologue either gcc's hotpatch feature (since gcc 4.8)
* or a combination of -pg -mrecord-mcount -mnop-mcount -mfentry flags
* (since gcc 9 / clang 10) is used.
* In both cases the original and also the disabled function prologue contains
* only a single six byte instruction and looks like this:
* > brcl 0,0 # offset 0
* To enable ftrace the code gets patched like above and afterwards looks
* like this:
s390/ftrace,kprobes: allow to patch first instruction If the function tracer is enabled, allow to set kprobes on the first instruction of a function (which is the function trace caller): If no kprobe is set handling of enabling and disabling function tracing of a function simply patches the first instruction. Either it is a nop (right now it's an unconditional branch, which skips the mcount block), or it's a branch to the ftrace_caller() function. If a kprobe is being placed on a function tracer calling instruction we encode if we actually have a nop or branch in the remaining bytes after the breakpoint instruction (illegal opcode). This is possible, since the size of the instruction used for the nop and branch is six bytes, while the size of the breakpoint is only two bytes. Therefore the first two bytes contain the illegal opcode and the last four bytes contain either "0" for nop or "1" for branch. The kprobes code will then execute/simulate the correct instruction. Instruction patching for kprobes and function tracer is always done with stop_machine(). Therefore we don't have any races where an instruction is patched concurrently on a different cpu. Besides that also the program check handler which executes the function trace caller instruction won't be executed concurrently to any stop_machine() execution. This allows to keep full fault based kprobes handling which generates correct pt_regs contents automatically. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-15 10:17:38 +00:00
* > brasl %r0,ftrace_caller # offset 0
*
* The instruction will be patched by ftrace_make_call / ftrace_make_nop.
* The ftrace function gets called with a non-standard C function call ABI
* where r0 contains the return address. It is also expected that the called
* function only clobbers r0 and r1, but restores r2-r15.
s390/ftrace,kprobes: allow to patch first instruction If the function tracer is enabled, allow to set kprobes on the first instruction of a function (which is the function trace caller): If no kprobe is set handling of enabling and disabling function tracing of a function simply patches the first instruction. Either it is a nop (right now it's an unconditional branch, which skips the mcount block), or it's a branch to the ftrace_caller() function. If a kprobe is being placed on a function tracer calling instruction we encode if we actually have a nop or branch in the remaining bytes after the breakpoint instruction (illegal opcode). This is possible, since the size of the instruction used for the nop and branch is six bytes, while the size of the breakpoint is only two bytes. Therefore the first two bytes contain the illegal opcode and the last four bytes contain either "0" for nop or "1" for branch. The kprobes code will then execute/simulate the correct instruction. Instruction patching for kprobes and function tracer is always done with stop_machine(). Therefore we don't have any races where an instruction is patched concurrently on a different cpu. Besides that also the program check handler which executes the function trace caller instruction won't be executed concurrently to any stop_machine() execution. This allows to keep full fault based kprobes handling which generates correct pt_regs contents automatically. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-15 10:17:38 +00:00
* For module code we can't directly jump to ftrace caller, but need a
* trampoline (ftrace_plt), which clobbers also r1.
*/
s390/ftrace: fix ftrace_update_ftrace_func implementation s390 enforces DYNAMIC_FTRACE if FUNCTION_TRACER is selected. At the same time implementation of ftrace_caller is not compliant with HAVE_DYNAMIC_FTRACE since it doesn't provide implementation of ftrace_update_ftrace_func() and calls ftrace_trace_function() directly. The subtle difference is that during ftrace code patching ftrace replaces function tracer via ftrace_update_ftrace_func() and activates it back afterwards. Unexpected direct calls to ftrace_trace_function() during ftrace code patching leads to nullptr-dereferences when tracing is activated for one of functions which are used during code patching. Those function currently are: copy_from_kernel_nofault() copy_from_kernel_nofault_allowed() preempt_count_sub() [with debug_defconfig] preempt_count_add() [with debug_defconfig] Corresponding KASAN report: BUG: KASAN: nullptr-dereference in function_trace_call+0x316/0x3b0 Read of size 4 at addr 0000000000001e08 by task migration/0/15 CPU: 0 PID: 15 Comm: migration/0 Tainted: G B 5.13.0-41423-g08316af3644d Hardware name: IBM 3906 M04 704 (LPAR) Stopper: multi_cpu_stop+0x0/0x3e0 <- stop_machine_cpuslocked+0x1e4/0x218 Call Trace: [<0000000001f77caa>] show_stack+0x16a/0x1d0 [<0000000001f8de42>] dump_stack+0x15a/0x1b0 [<0000000001f81d56>] print_address_description.constprop.0+0x66/0x2e0 [<000000000082b0ca>] kasan_report+0x152/0x1c0 [<00000000004cfd8e>] function_trace_call+0x316/0x3b0 [<0000000001fb7082>] ftrace_caller+0x7a/0x7e [<00000000006bb3e6>] copy_from_kernel_nofault_allowed+0x6/0x10 [<00000000006bb42e>] copy_from_kernel_nofault+0x3e/0xd0 [<000000000014605c>] ftrace_make_call+0xb4/0x1f8 [<000000000047a1b4>] ftrace_replace_code+0x134/0x1d8 [<000000000047a6e0>] ftrace_modify_all_code+0x120/0x1d0 [<000000000047a7ec>] __ftrace_modify_code+0x5c/0x78 [<000000000042395c>] multi_cpu_stop+0x224/0x3e0 [<0000000000423212>] cpu_stopper_thread+0x33a/0x5a0 [<0000000000243ff2>] smpboot_thread_fn+0x302/0x708 [<00000000002329ea>] kthread+0x342/0x408 [<00000000001066b2>] __ret_from_fork+0x92/0xf0 [<0000000001fb57fa>] ret_from_fork+0xa/0x30 The buggy address belongs to the page: page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1 flags: 0x1ffff00000001000(reserved|node=0|zone=0|lastcpupid=0x1ffff) raw: 1ffff00000001000 0000040000000048 0000040000000048 0000000000000000 raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 0000000000001d00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 0000000000001d80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 >0000000000001e00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 ^ 0000000000001e80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 0000000000001f00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 ================================================================== To fix that introduce ftrace_func callback to be called from ftrace_caller and update it in ftrace_update_ftrace_func(). Fixes: 4cc9bed034d1 ("[S390] cleanup ftrace backend functions") Cc: stable@vger.kernel.org Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-06-25 21:50:07 +00:00
void *ftrace_func __read_mostly = ftrace_stub;
s390/ftrace: implement hotpatching s390 allows hotpatching the mask of a conditional jump instruction. Make use of this feature in order to avoid the expensive stop_machine() call. The new trampolines are split in 3 stages: - A first stage is a 6-byte relative conditional long branch located at each function's entry point. Its offset always points to the second stage for the corresponding function, and its mask is either all 0s (ftrace off) or all 1s (ftrace on). The code for flipping the mask is borrowed from ftrace_{enable,disable}_ftrace_graph_caller. After flipping, ftrace_arch_code_modify_post_process() syncs with all the other CPUs by sending SIGPs. - Second stages for vmlinux are stored in a separate part of the .text section reserved by the linker script, and in dynamically allocated memory for modules. This prevents the icache pollution. The total size of second stages is about 1.5% of that of the kernel image. Putting second stages in the .bss section is possible and decreases the size of the non-compressed vmlinux, but splits the kernel 1:1 mapping, which is a bad tradeoff. Each second stage contains a call to the third stage, a pointer to the part of the intercepted function right after the first stage, and a pointer to an interceptor function (e.g. ftrace_caller). Second stages are 8-byte aligned for the future direct calls implementation. - There are only two copies of the third stage: in the .text section for vmlinux and in dynamically allocated memory for modules. It can be an expoline, which is relatively large, so inlining it into each second stage is prohibitively expensive. As a result of this organization, phoronix-test-suite with ftrace off does not show any performance degradation. Suggested-by: Sven Schnelle <svens@linux.ibm.com> Suggested-by: Vasily Gorbik <gor@linux.ibm.com> Co-developed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20210728212546.128248-3-iii@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-28 21:25:46 +00:00
struct ftrace_insn {
u16 opc;
s32 disp;
} __packed;
asm(
" .align 16\n"
"ftrace_shared_hotpatch_trampoline_br:\n"
" lmg %r0,%r1,2(%r1)\n"
" br %r1\n"
"ftrace_shared_hotpatch_trampoline_br_end:\n"
);
#ifdef CONFIG_EXPOLINE
asm(
" .align 16\n"
"ftrace_shared_hotpatch_trampoline_ex:\n"
" lmg %r0,%r1,2(%r1)\n"
" ex %r0," __stringify(__LC_BR_R1) "(%r0)\n"
" j .\n"
"ftrace_shared_hotpatch_trampoline_ex_end:\n"
);
asm(
" .align 16\n"
"ftrace_shared_hotpatch_trampoline_exrl:\n"
" lmg %r0,%r1,2(%r1)\n"
" .insn ril,0xc60000000000,%r0,0f\n" /* exrl */
" j .\n"
"0: br %r1\n"
"ftrace_shared_hotpatch_trampoline_exrl_end:\n"
);
#endif /* CONFIG_EXPOLINE */
#ifdef CONFIG_MODULES
static char *ftrace_plt;
asm(
" .data\n"
"ftrace_plt_template:\n"
" basr %r1,%r0\n"
" lg %r1,0f-.(%r1)\n"
" br %r1\n"
"0: .quad ftrace_caller\n"
"ftrace_plt_template_end:\n"
" .previous\n"
);
#endif /* CONFIG_MODULES */
static const char *ftrace_shared_hotpatch_trampoline(const char **end)
{
const char *tstart, *tend;
tstart = ftrace_shared_hotpatch_trampoline_br;
tend = ftrace_shared_hotpatch_trampoline_br_end;
#ifdef CONFIG_EXPOLINE
if (!nospec_disable) {
tstart = ftrace_shared_hotpatch_trampoline_ex;
tend = ftrace_shared_hotpatch_trampoline_ex_end;
if (test_facility(35)) { /* exrl */
tstart = ftrace_shared_hotpatch_trampoline_exrl;
tend = ftrace_shared_hotpatch_trampoline_exrl_end;
}
}
#endif /* CONFIG_EXPOLINE */
if (end)
*end = tend;
return tstart;
}
bool ftrace_need_init_nop(void)
{
return ftrace_shared_hotpatch_trampoline(NULL);
}
int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec)
{
static struct ftrace_hotpatch_trampoline *next_vmlinux_trampoline =
__ftrace_hotpatch_trampolines_start;
static const char orig[6] = { 0xc0, 0x04, 0x00, 0x00, 0x00, 0x00 };
static struct ftrace_hotpatch_trampoline *trampoline;
struct ftrace_hotpatch_trampoline **next_trampoline;
struct ftrace_hotpatch_trampoline *trampolines_end;
struct ftrace_hotpatch_trampoline tmp;
struct ftrace_insn *insn;
const char *shared;
s32 disp;
BUILD_BUG_ON(sizeof(struct ftrace_hotpatch_trampoline) !=
SIZEOF_FTRACE_HOTPATCH_TRAMPOLINE);
next_trampoline = &next_vmlinux_trampoline;
trampolines_end = __ftrace_hotpatch_trampolines_end;
shared = ftrace_shared_hotpatch_trampoline(NULL);
#ifdef CONFIG_MODULES
if (mod) {
next_trampoline = &mod->arch.next_trampoline;
trampolines_end = mod->arch.trampolines_end;
shared = ftrace_plt;
}
#endif
if (WARN_ON_ONCE(*next_trampoline >= trampolines_end))
return -ENOMEM;
trampoline = (*next_trampoline)++;
/* Check for the compiler-generated fentry nop (brcl 0, .). */
if (WARN_ON_ONCE(memcmp((const void *)rec->ip, &orig, sizeof(orig))))
return -EINVAL;
/* Generate the trampoline. */
tmp.brasl_opc = 0xc015; /* brasl %r1, shared */
tmp.brasl_disp = (shared - (const char *)&trampoline->brasl_opc) / 2;
tmp.interceptor = FTRACE_ADDR;
tmp.rest_of_intercepted_function = rec->ip + sizeof(struct ftrace_insn);
s390_kernel_write(trampoline, &tmp, sizeof(tmp));
/* Generate a jump to the trampoline. */
disp = ((char *)trampoline - (char *)rec->ip) / 2;
insn = (struct ftrace_insn *)rec->ip;
s390_kernel_write(&insn->disp, &disp, sizeof(disp));
return 0;
}
s390/ftrace: add HAVE_DYNAMIC_FTRACE_WITH_REGS support This code is based on a patch from Vojtech Pavlik. http://marc.info/?l=linux-s390&m=140438885114413&w=2 The actual implementation now differs significantly: Instead of adding a second function "ftrace_regs_caller" which would be nearly identical to the existing ftrace_caller function, the current ftrace_caller function is now an alias to ftrace_regs_caller and always passes the needed pt_regs structure and function_trace_op parameters unconditionally. Besides that also use asm offsets to correctly allocate and access the new struct pt_regs on the stack. While at it we can make use of new instruction to get rid of some indirect loads if compiled for new machines. The passed struct pt_regs can be changed by the called function and it's new contents will replace the current contents. Note: to change the return address the embedded psw member of the pt_regs structure must be changed. The psw member is right now incomplete, since the mask part is missing. For all current use cases this should be sufficent. Providing and restoring a sane mask would mean we need to add an epsw/lpswe pair to the mcount code. Only these two instruction would cost us ~120 cycles which currently seems not necessary. Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-08-15 11:01:46 +00:00
int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
unsigned long addr)
{
return 0;
}
s390/ftrace: implement hotpatching s390 allows hotpatching the mask of a conditional jump instruction. Make use of this feature in order to avoid the expensive stop_machine() call. The new trampolines are split in 3 stages: - A first stage is a 6-byte relative conditional long branch located at each function's entry point. Its offset always points to the second stage for the corresponding function, and its mask is either all 0s (ftrace off) or all 1s (ftrace on). The code for flipping the mask is borrowed from ftrace_{enable,disable}_ftrace_graph_caller. After flipping, ftrace_arch_code_modify_post_process() syncs with all the other CPUs by sending SIGPs. - Second stages for vmlinux are stored in a separate part of the .text section reserved by the linker script, and in dynamically allocated memory for modules. This prevents the icache pollution. The total size of second stages is about 1.5% of that of the kernel image. Putting second stages in the .bss section is possible and decreases the size of the non-compressed vmlinux, but splits the kernel 1:1 mapping, which is a bad tradeoff. Each second stage contains a call to the third stage, a pointer to the part of the intercepted function right after the first stage, and a pointer to an interceptor function (e.g. ftrace_caller). Second stages are 8-byte aligned for the future direct calls implementation. - There are only two copies of the third stage: in the .text section for vmlinux and in dynamically allocated memory for modules. It can be an expoline, which is relatively large, so inlining it into each second stage is prohibitively expensive. As a result of this organization, phoronix-test-suite with ftrace off does not show any performance degradation. Suggested-by: Sven Schnelle <svens@linux.ibm.com> Suggested-by: Vasily Gorbik <gor@linux.ibm.com> Co-developed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20210728212546.128248-3-iii@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-28 21:25:46 +00:00
static void ftrace_generate_nop_insn(struct ftrace_insn *insn)
{
/* brcl 0,0 */
insn->opc = 0xc004;
insn->disp = 0;
}
static void ftrace_generate_call_insn(struct ftrace_insn *insn,
unsigned long ip)
{
unsigned long target;
/* brasl r0,ftrace_caller */
target = FTRACE_ADDR;
#ifdef CONFIG_MODULES
if (is_module_addr((void *)ip))
target = (unsigned long)ftrace_plt;
#endif /* CONFIG_MODULES */
insn->opc = 0xc005;
insn->disp = (target - ip) / 2;
}
static void brcl_disable(void *brcl)
{
u8 op = 0x04; /* set mask field to zero */
s390_kernel_write((char *)brcl + 1, &op, sizeof(op));
}
int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
unsigned long addr)
{
struct ftrace_insn orig, new, old;
s390/ftrace,kprobes: allow to patch first instruction If the function tracer is enabled, allow to set kprobes on the first instruction of a function (which is the function trace caller): If no kprobe is set handling of enabling and disabling function tracing of a function simply patches the first instruction. Either it is a nop (right now it's an unconditional branch, which skips the mcount block), or it's a branch to the ftrace_caller() function. If a kprobe is being placed on a function tracer calling instruction we encode if we actually have a nop or branch in the remaining bytes after the breakpoint instruction (illegal opcode). This is possible, since the size of the instruction used for the nop and branch is six bytes, while the size of the breakpoint is only two bytes. Therefore the first two bytes contain the illegal opcode and the last four bytes contain either "0" for nop or "1" for branch. The kprobes code will then execute/simulate the correct instruction. Instruction patching for kprobes and function tracer is always done with stop_machine(). Therefore we don't have any races where an instruction is patched concurrently on a different cpu. Besides that also the program check handler which executes the function trace caller instruction won't be executed concurrently to any stop_machine() execution. This allows to keep full fault based kprobes handling which generates correct pt_regs contents automatically. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-15 10:17:38 +00:00
s390/ftrace: implement hotpatching s390 allows hotpatching the mask of a conditional jump instruction. Make use of this feature in order to avoid the expensive stop_machine() call. The new trampolines are split in 3 stages: - A first stage is a 6-byte relative conditional long branch located at each function's entry point. Its offset always points to the second stage for the corresponding function, and its mask is either all 0s (ftrace off) or all 1s (ftrace on). The code for flipping the mask is borrowed from ftrace_{enable,disable}_ftrace_graph_caller. After flipping, ftrace_arch_code_modify_post_process() syncs with all the other CPUs by sending SIGPs. - Second stages for vmlinux are stored in a separate part of the .text section reserved by the linker script, and in dynamically allocated memory for modules. This prevents the icache pollution. The total size of second stages is about 1.5% of that of the kernel image. Putting second stages in the .bss section is possible and decreases the size of the non-compressed vmlinux, but splits the kernel 1:1 mapping, which is a bad tradeoff. Each second stage contains a call to the third stage, a pointer to the part of the intercepted function right after the first stage, and a pointer to an interceptor function (e.g. ftrace_caller). Second stages are 8-byte aligned for the future direct calls implementation. - There are only two copies of the third stage: in the .text section for vmlinux and in dynamically allocated memory for modules. It can be an expoline, which is relatively large, so inlining it into each second stage is prohibitively expensive. As a result of this organization, phoronix-test-suite with ftrace off does not show any performance degradation. Suggested-by: Sven Schnelle <svens@linux.ibm.com> Suggested-by: Vasily Gorbik <gor@linux.ibm.com> Co-developed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20210728212546.128248-3-iii@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-28 21:25:46 +00:00
if (ftrace_shared_hotpatch_trampoline(NULL)) {
brcl_disable((void *)rec->ip);
return 0;
}
if (copy_from_kernel_nofault(&old, (void *) rec->ip, sizeof(old)))
s390/ftrace,kprobes: allow to patch first instruction If the function tracer is enabled, allow to set kprobes on the first instruction of a function (which is the function trace caller): If no kprobe is set handling of enabling and disabling function tracing of a function simply patches the first instruction. Either it is a nop (right now it's an unconditional branch, which skips the mcount block), or it's a branch to the ftrace_caller() function. If a kprobe is being placed on a function tracer calling instruction we encode if we actually have a nop or branch in the remaining bytes after the breakpoint instruction (illegal opcode). This is possible, since the size of the instruction used for the nop and branch is six bytes, while the size of the breakpoint is only two bytes. Therefore the first two bytes contain the illegal opcode and the last four bytes contain either "0" for nop or "1" for branch. The kprobes code will then execute/simulate the correct instruction. Instruction patching for kprobes and function tracer is always done with stop_machine(). Therefore we don't have any races where an instruction is patched concurrently on a different cpu. Besides that also the program check handler which executes the function trace caller instruction won't be executed concurrently to any stop_machine() execution. This allows to keep full fault based kprobes handling which generates correct pt_regs contents automatically. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-15 10:17:38 +00:00
return -EFAULT;
/* Replace ftrace call with a nop. */
ftrace_generate_call_insn(&orig, rec->ip);
ftrace_generate_nop_insn(&new);
/* Verify that the to be replaced code matches what we expect. */
if (memcmp(&orig, &old, sizeof(old)))
return -EINVAL;
s390_kernel_write((void *) rec->ip, &new, sizeof(new));
return 0;
}
s390/ftrace: implement hotpatching s390 allows hotpatching the mask of a conditional jump instruction. Make use of this feature in order to avoid the expensive stop_machine() call. The new trampolines are split in 3 stages: - A first stage is a 6-byte relative conditional long branch located at each function's entry point. Its offset always points to the second stage for the corresponding function, and its mask is either all 0s (ftrace off) or all 1s (ftrace on). The code for flipping the mask is borrowed from ftrace_{enable,disable}_ftrace_graph_caller. After flipping, ftrace_arch_code_modify_post_process() syncs with all the other CPUs by sending SIGPs. - Second stages for vmlinux are stored in a separate part of the .text section reserved by the linker script, and in dynamically allocated memory for modules. This prevents the icache pollution. The total size of second stages is about 1.5% of that of the kernel image. Putting second stages in the .bss section is possible and decreases the size of the non-compressed vmlinux, but splits the kernel 1:1 mapping, which is a bad tradeoff. Each second stage contains a call to the third stage, a pointer to the part of the intercepted function right after the first stage, and a pointer to an interceptor function (e.g. ftrace_caller). Second stages are 8-byte aligned for the future direct calls implementation. - There are only two copies of the third stage: in the .text section for vmlinux and in dynamically allocated memory for modules. It can be an expoline, which is relatively large, so inlining it into each second stage is prohibitively expensive. As a result of this organization, phoronix-test-suite with ftrace off does not show any performance degradation. Suggested-by: Sven Schnelle <svens@linux.ibm.com> Suggested-by: Vasily Gorbik <gor@linux.ibm.com> Co-developed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20210728212546.128248-3-iii@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-28 21:25:46 +00:00
static void brcl_enable(void *brcl)
{
u8 op = 0xf4; /* set mask field to all ones */
s390_kernel_write((char *)brcl + 1, &op, sizeof(op));
}
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
struct ftrace_insn orig, new, old;
s390/ftrace,kprobes: allow to patch first instruction If the function tracer is enabled, allow to set kprobes on the first instruction of a function (which is the function trace caller): If no kprobe is set handling of enabling and disabling function tracing of a function simply patches the first instruction. Either it is a nop (right now it's an unconditional branch, which skips the mcount block), or it's a branch to the ftrace_caller() function. If a kprobe is being placed on a function tracer calling instruction we encode if we actually have a nop or branch in the remaining bytes after the breakpoint instruction (illegal opcode). This is possible, since the size of the instruction used for the nop and branch is six bytes, while the size of the breakpoint is only two bytes. Therefore the first two bytes contain the illegal opcode and the last four bytes contain either "0" for nop or "1" for branch. The kprobes code will then execute/simulate the correct instruction. Instruction patching for kprobes and function tracer is always done with stop_machine(). Therefore we don't have any races where an instruction is patched concurrently on a different cpu. Besides that also the program check handler which executes the function trace caller instruction won't be executed concurrently to any stop_machine() execution. This allows to keep full fault based kprobes handling which generates correct pt_regs contents automatically. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-15 10:17:38 +00:00
s390/ftrace: implement hotpatching s390 allows hotpatching the mask of a conditional jump instruction. Make use of this feature in order to avoid the expensive stop_machine() call. The new trampolines are split in 3 stages: - A first stage is a 6-byte relative conditional long branch located at each function's entry point. Its offset always points to the second stage for the corresponding function, and its mask is either all 0s (ftrace off) or all 1s (ftrace on). The code for flipping the mask is borrowed from ftrace_{enable,disable}_ftrace_graph_caller. After flipping, ftrace_arch_code_modify_post_process() syncs with all the other CPUs by sending SIGPs. - Second stages for vmlinux are stored in a separate part of the .text section reserved by the linker script, and in dynamically allocated memory for modules. This prevents the icache pollution. The total size of second stages is about 1.5% of that of the kernel image. Putting second stages in the .bss section is possible and decreases the size of the non-compressed vmlinux, but splits the kernel 1:1 mapping, which is a bad tradeoff. Each second stage contains a call to the third stage, a pointer to the part of the intercepted function right after the first stage, and a pointer to an interceptor function (e.g. ftrace_caller). Second stages are 8-byte aligned for the future direct calls implementation. - There are only two copies of the third stage: in the .text section for vmlinux and in dynamically allocated memory for modules. It can be an expoline, which is relatively large, so inlining it into each second stage is prohibitively expensive. As a result of this organization, phoronix-test-suite with ftrace off does not show any performance degradation. Suggested-by: Sven Schnelle <svens@linux.ibm.com> Suggested-by: Vasily Gorbik <gor@linux.ibm.com> Co-developed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20210728212546.128248-3-iii@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-28 21:25:46 +00:00
if (ftrace_shared_hotpatch_trampoline(NULL)) {
brcl_enable((void *)rec->ip);
return 0;
}
if (copy_from_kernel_nofault(&old, (void *) rec->ip, sizeof(old)))
s390/ftrace,kprobes: allow to patch first instruction If the function tracer is enabled, allow to set kprobes on the first instruction of a function (which is the function trace caller): If no kprobe is set handling of enabling and disabling function tracing of a function simply patches the first instruction. Either it is a nop (right now it's an unconditional branch, which skips the mcount block), or it's a branch to the ftrace_caller() function. If a kprobe is being placed on a function tracer calling instruction we encode if we actually have a nop or branch in the remaining bytes after the breakpoint instruction (illegal opcode). This is possible, since the size of the instruction used for the nop and branch is six bytes, while the size of the breakpoint is only two bytes. Therefore the first two bytes contain the illegal opcode and the last four bytes contain either "0" for nop or "1" for branch. The kprobes code will then execute/simulate the correct instruction. Instruction patching for kprobes and function tracer is always done with stop_machine(). Therefore we don't have any races where an instruction is patched concurrently on a different cpu. Besides that also the program check handler which executes the function trace caller instruction won't be executed concurrently to any stop_machine() execution. This allows to keep full fault based kprobes handling which generates correct pt_regs contents automatically. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-15 10:17:38 +00:00
return -EFAULT;
/* Replace nop with an ftrace call. */
ftrace_generate_nop_insn(&orig);
ftrace_generate_call_insn(&new, rec->ip);
/* Verify that the to be replaced code matches what we expect. */
if (memcmp(&orig, &old, sizeof(old)))
return -EINVAL;
s390_kernel_write((void *) rec->ip, &new, sizeof(new));
return 0;
}
int ftrace_update_ftrace_func(ftrace_func_t func)
{
s390/ftrace: fix ftrace_update_ftrace_func implementation s390 enforces DYNAMIC_FTRACE if FUNCTION_TRACER is selected. At the same time implementation of ftrace_caller is not compliant with HAVE_DYNAMIC_FTRACE since it doesn't provide implementation of ftrace_update_ftrace_func() and calls ftrace_trace_function() directly. The subtle difference is that during ftrace code patching ftrace replaces function tracer via ftrace_update_ftrace_func() and activates it back afterwards. Unexpected direct calls to ftrace_trace_function() during ftrace code patching leads to nullptr-dereferences when tracing is activated for one of functions which are used during code patching. Those function currently are: copy_from_kernel_nofault() copy_from_kernel_nofault_allowed() preempt_count_sub() [with debug_defconfig] preempt_count_add() [with debug_defconfig] Corresponding KASAN report: BUG: KASAN: nullptr-dereference in function_trace_call+0x316/0x3b0 Read of size 4 at addr 0000000000001e08 by task migration/0/15 CPU: 0 PID: 15 Comm: migration/0 Tainted: G B 5.13.0-41423-g08316af3644d Hardware name: IBM 3906 M04 704 (LPAR) Stopper: multi_cpu_stop+0x0/0x3e0 <- stop_machine_cpuslocked+0x1e4/0x218 Call Trace: [<0000000001f77caa>] show_stack+0x16a/0x1d0 [<0000000001f8de42>] dump_stack+0x15a/0x1b0 [<0000000001f81d56>] print_address_description.constprop.0+0x66/0x2e0 [<000000000082b0ca>] kasan_report+0x152/0x1c0 [<00000000004cfd8e>] function_trace_call+0x316/0x3b0 [<0000000001fb7082>] ftrace_caller+0x7a/0x7e [<00000000006bb3e6>] copy_from_kernel_nofault_allowed+0x6/0x10 [<00000000006bb42e>] copy_from_kernel_nofault+0x3e/0xd0 [<000000000014605c>] ftrace_make_call+0xb4/0x1f8 [<000000000047a1b4>] ftrace_replace_code+0x134/0x1d8 [<000000000047a6e0>] ftrace_modify_all_code+0x120/0x1d0 [<000000000047a7ec>] __ftrace_modify_code+0x5c/0x78 [<000000000042395c>] multi_cpu_stop+0x224/0x3e0 [<0000000000423212>] cpu_stopper_thread+0x33a/0x5a0 [<0000000000243ff2>] smpboot_thread_fn+0x302/0x708 [<00000000002329ea>] kthread+0x342/0x408 [<00000000001066b2>] __ret_from_fork+0x92/0xf0 [<0000000001fb57fa>] ret_from_fork+0xa/0x30 The buggy address belongs to the page: page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1 flags: 0x1ffff00000001000(reserved|node=0|zone=0|lastcpupid=0x1ffff) raw: 1ffff00000001000 0000040000000048 0000040000000048 0000000000000000 raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 0000000000001d00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 0000000000001d80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 >0000000000001e00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 ^ 0000000000001e80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 0000000000001f00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 ================================================================== To fix that introduce ftrace_func callback to be called from ftrace_caller and update it in ftrace_update_ftrace_func(). Fixes: 4cc9bed034d1 ("[S390] cleanup ftrace backend functions") Cc: stable@vger.kernel.org Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-06-25 21:50:07 +00:00
ftrace_func = func;
return 0;
}
int __init ftrace_dyn_arch_init(void)
{
return 0;
}
s390/ftrace: implement hotpatching s390 allows hotpatching the mask of a conditional jump instruction. Make use of this feature in order to avoid the expensive stop_machine() call. The new trampolines are split in 3 stages: - A first stage is a 6-byte relative conditional long branch located at each function's entry point. Its offset always points to the second stage for the corresponding function, and its mask is either all 0s (ftrace off) or all 1s (ftrace on). The code for flipping the mask is borrowed from ftrace_{enable,disable}_ftrace_graph_caller. After flipping, ftrace_arch_code_modify_post_process() syncs with all the other CPUs by sending SIGPs. - Second stages for vmlinux are stored in a separate part of the .text section reserved by the linker script, and in dynamically allocated memory for modules. This prevents the icache pollution. The total size of second stages is about 1.5% of that of the kernel image. Putting second stages in the .bss section is possible and decreases the size of the non-compressed vmlinux, but splits the kernel 1:1 mapping, which is a bad tradeoff. Each second stage contains a call to the third stage, a pointer to the part of the intercepted function right after the first stage, and a pointer to an interceptor function (e.g. ftrace_caller). Second stages are 8-byte aligned for the future direct calls implementation. - There are only two copies of the third stage: in the .text section for vmlinux and in dynamically allocated memory for modules. It can be an expoline, which is relatively large, so inlining it into each second stage is prohibitively expensive. As a result of this organization, phoronix-test-suite with ftrace off does not show any performance degradation. Suggested-by: Sven Schnelle <svens@linux.ibm.com> Suggested-by: Vasily Gorbik <gor@linux.ibm.com> Co-developed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20210728212546.128248-3-iii@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-28 21:25:46 +00:00
void arch_ftrace_update_code(int command)
{
if (ftrace_shared_hotpatch_trampoline(NULL))
ftrace_modify_all_code(command);
else
ftrace_run_stop_machine(command);
}
static void __ftrace_sync(void *dummy)
{
}
int ftrace_arch_code_modify_post_process(void)
{
if (ftrace_shared_hotpatch_trampoline(NULL)) {
/* Send SIGP to the other CPUs, so they see the new code. */
smp_call_function(__ftrace_sync, NULL, 1);
}
return 0;
}
#ifdef CONFIG_MODULES
s390/ftrace,kprobes: allow to patch first instruction If the function tracer is enabled, allow to set kprobes on the first instruction of a function (which is the function trace caller): If no kprobe is set handling of enabling and disabling function tracing of a function simply patches the first instruction. Either it is a nop (right now it's an unconditional branch, which skips the mcount block), or it's a branch to the ftrace_caller() function. If a kprobe is being placed on a function tracer calling instruction we encode if we actually have a nop or branch in the remaining bytes after the breakpoint instruction (illegal opcode). This is possible, since the size of the instruction used for the nop and branch is six bytes, while the size of the breakpoint is only two bytes. Therefore the first two bytes contain the illegal opcode and the last four bytes contain either "0" for nop or "1" for branch. The kprobes code will then execute/simulate the correct instruction. Instruction patching for kprobes and function tracer is always done with stop_machine(). Therefore we don't have any races where an instruction is patched concurrently on a different cpu. Besides that also the program check handler which executes the function trace caller instruction won't be executed concurrently to any stop_machine() execution. This allows to keep full fault based kprobes handling which generates correct pt_regs contents automatically. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-15 10:17:38 +00:00
static int __init ftrace_plt_init(void)
{
s390/ftrace: implement hotpatching s390 allows hotpatching the mask of a conditional jump instruction. Make use of this feature in order to avoid the expensive stop_machine() call. The new trampolines are split in 3 stages: - A first stage is a 6-byte relative conditional long branch located at each function's entry point. Its offset always points to the second stage for the corresponding function, and its mask is either all 0s (ftrace off) or all 1s (ftrace on). The code for flipping the mask is borrowed from ftrace_{enable,disable}_ftrace_graph_caller. After flipping, ftrace_arch_code_modify_post_process() syncs with all the other CPUs by sending SIGPs. - Second stages for vmlinux are stored in a separate part of the .text section reserved by the linker script, and in dynamically allocated memory for modules. This prevents the icache pollution. The total size of second stages is about 1.5% of that of the kernel image. Putting second stages in the .bss section is possible and decreases the size of the non-compressed vmlinux, but splits the kernel 1:1 mapping, which is a bad tradeoff. Each second stage contains a call to the third stage, a pointer to the part of the intercepted function right after the first stage, and a pointer to an interceptor function (e.g. ftrace_caller). Second stages are 8-byte aligned for the future direct calls implementation. - There are only two copies of the third stage: in the .text section for vmlinux and in dynamically allocated memory for modules. It can be an expoline, which is relatively large, so inlining it into each second stage is prohibitively expensive. As a result of this organization, phoronix-test-suite with ftrace off does not show any performance degradation. Suggested-by: Sven Schnelle <svens@linux.ibm.com> Suggested-by: Vasily Gorbik <gor@linux.ibm.com> Co-developed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20210728212546.128248-3-iii@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-28 21:25:46 +00:00
const char *start, *end;
s390/ftrace,kprobes: allow to patch first instruction If the function tracer is enabled, allow to set kprobes on the first instruction of a function (which is the function trace caller): If no kprobe is set handling of enabling and disabling function tracing of a function simply patches the first instruction. Either it is a nop (right now it's an unconditional branch, which skips the mcount block), or it's a branch to the ftrace_caller() function. If a kprobe is being placed on a function tracer calling instruction we encode if we actually have a nop or branch in the remaining bytes after the breakpoint instruction (illegal opcode). This is possible, since the size of the instruction used for the nop and branch is six bytes, while the size of the breakpoint is only two bytes. Therefore the first two bytes contain the illegal opcode and the last four bytes contain either "0" for nop or "1" for branch. The kprobes code will then execute/simulate the correct instruction. Instruction patching for kprobes and function tracer is always done with stop_machine(). Therefore we don't have any races where an instruction is patched concurrently on a different cpu. Besides that also the program check handler which executes the function trace caller instruction won't be executed concurrently to any stop_machine() execution. This allows to keep full fault based kprobes handling which generates correct pt_regs contents automatically. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-15 10:17:38 +00:00
s390/ftrace: implement hotpatching s390 allows hotpatching the mask of a conditional jump instruction. Make use of this feature in order to avoid the expensive stop_machine() call. The new trampolines are split in 3 stages: - A first stage is a 6-byte relative conditional long branch located at each function's entry point. Its offset always points to the second stage for the corresponding function, and its mask is either all 0s (ftrace off) or all 1s (ftrace on). The code for flipping the mask is borrowed from ftrace_{enable,disable}_ftrace_graph_caller. After flipping, ftrace_arch_code_modify_post_process() syncs with all the other CPUs by sending SIGPs. - Second stages for vmlinux are stored in a separate part of the .text section reserved by the linker script, and in dynamically allocated memory for modules. This prevents the icache pollution. The total size of second stages is about 1.5% of that of the kernel image. Putting second stages in the .bss section is possible and decreases the size of the non-compressed vmlinux, but splits the kernel 1:1 mapping, which is a bad tradeoff. Each second stage contains a call to the third stage, a pointer to the part of the intercepted function right after the first stage, and a pointer to an interceptor function (e.g. ftrace_caller). Second stages are 8-byte aligned for the future direct calls implementation. - There are only two copies of the third stage: in the .text section for vmlinux and in dynamically allocated memory for modules. It can be an expoline, which is relatively large, so inlining it into each second stage is prohibitively expensive. As a result of this organization, phoronix-test-suite with ftrace off does not show any performance degradation. Suggested-by: Sven Schnelle <svens@linux.ibm.com> Suggested-by: Vasily Gorbik <gor@linux.ibm.com> Co-developed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20210728212546.128248-3-iii@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-28 21:25:46 +00:00
ftrace_plt = module_alloc(PAGE_SIZE);
s390/ftrace,kprobes: allow to patch first instruction If the function tracer is enabled, allow to set kprobes on the first instruction of a function (which is the function trace caller): If no kprobe is set handling of enabling and disabling function tracing of a function simply patches the first instruction. Either it is a nop (right now it's an unconditional branch, which skips the mcount block), or it's a branch to the ftrace_caller() function. If a kprobe is being placed on a function tracer calling instruction we encode if we actually have a nop or branch in the remaining bytes after the breakpoint instruction (illegal opcode). This is possible, since the size of the instruction used for the nop and branch is six bytes, while the size of the breakpoint is only two bytes. Therefore the first two bytes contain the illegal opcode and the last four bytes contain either "0" for nop or "1" for branch. The kprobes code will then execute/simulate the correct instruction. Instruction patching for kprobes and function tracer is always done with stop_machine(). Therefore we don't have any races where an instruction is patched concurrently on a different cpu. Besides that also the program check handler which executes the function trace caller instruction won't be executed concurrently to any stop_machine() execution. This allows to keep full fault based kprobes handling which generates correct pt_regs contents automatically. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-15 10:17:38 +00:00
if (!ftrace_plt)
panic("cannot allocate ftrace plt\n");
s390/ftrace: implement hotpatching s390 allows hotpatching the mask of a conditional jump instruction. Make use of this feature in order to avoid the expensive stop_machine() call. The new trampolines are split in 3 stages: - A first stage is a 6-byte relative conditional long branch located at each function's entry point. Its offset always points to the second stage for the corresponding function, and its mask is either all 0s (ftrace off) or all 1s (ftrace on). The code for flipping the mask is borrowed from ftrace_{enable,disable}_ftrace_graph_caller. After flipping, ftrace_arch_code_modify_post_process() syncs with all the other CPUs by sending SIGPs. - Second stages for vmlinux are stored in a separate part of the .text section reserved by the linker script, and in dynamically allocated memory for modules. This prevents the icache pollution. The total size of second stages is about 1.5% of that of the kernel image. Putting second stages in the .bss section is possible and decreases the size of the non-compressed vmlinux, but splits the kernel 1:1 mapping, which is a bad tradeoff. Each second stage contains a call to the third stage, a pointer to the part of the intercepted function right after the first stage, and a pointer to an interceptor function (e.g. ftrace_caller). Second stages are 8-byte aligned for the future direct calls implementation. - There are only two copies of the third stage: in the .text section for vmlinux and in dynamically allocated memory for modules. It can be an expoline, which is relatively large, so inlining it into each second stage is prohibitively expensive. As a result of this organization, phoronix-test-suite with ftrace off does not show any performance degradation. Suggested-by: Sven Schnelle <svens@linux.ibm.com> Suggested-by: Vasily Gorbik <gor@linux.ibm.com> Co-developed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20210728212546.128248-3-iii@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-28 21:25:46 +00:00
start = ftrace_shared_hotpatch_trampoline(&end);
if (!start) {
start = ftrace_plt_template;
end = ftrace_plt_template_end;
}
memcpy(ftrace_plt, start, end - start);
set_memory_ro((unsigned long)ftrace_plt, 1);
s390/ftrace,kprobes: allow to patch first instruction If the function tracer is enabled, allow to set kprobes on the first instruction of a function (which is the function trace caller): If no kprobe is set handling of enabling and disabling function tracing of a function simply patches the first instruction. Either it is a nop (right now it's an unconditional branch, which skips the mcount block), or it's a branch to the ftrace_caller() function. If a kprobe is being placed on a function tracer calling instruction we encode if we actually have a nop or branch in the remaining bytes after the breakpoint instruction (illegal opcode). This is possible, since the size of the instruction used for the nop and branch is six bytes, while the size of the breakpoint is only two bytes. Therefore the first two bytes contain the illegal opcode and the last four bytes contain either "0" for nop or "1" for branch. The kprobes code will then execute/simulate the correct instruction. Instruction patching for kprobes and function tracer is always done with stop_machine(). Therefore we don't have any races where an instruction is patched concurrently on a different cpu. Besides that also the program check handler which executes the function trace caller instruction won't be executed concurrently to any stop_machine() execution. This allows to keep full fault based kprobes handling which generates correct pt_regs contents automatically. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-15 10:17:38 +00:00
return 0;
}
device_initcall(ftrace_plt_init);
#endif /* CONFIG_MODULES */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/*
* Hook the return address and push it in the stack of return addresses
* in current thread info.
*/
unsigned long prepare_ftrace_return(unsigned long ra, unsigned long sp,
unsigned long ip)
{
if (unlikely(ftrace_graph_is_dead()))
goto out;
if (unlikely(atomic_read(&current->tracing_graph_pause)))
goto out;
ip -= MCOUNT_INSN_SIZE;
if (!function_graph_enter(ra, ip, 0, (void *) sp))
ra = (unsigned long) return_to_handler;
out:
return ra;
}
NOKPROBE_SYMBOL(prepare_ftrace_return);
/*
* Patch the kernel code at ftrace_graph_caller location. The instruction
* there is branch relative on condition. To enable the ftrace graph code
* block, we simply patch the mask field of the instruction to zero and
* turn the instruction into a nop.
* To disable the ftrace graph code the mask field will be patched to
* all ones, which turns the instruction into an unconditional branch.
*/
int ftrace_enable_ftrace_graph_caller(void)
{
brcl_disable(ftrace_graph_caller);
return 0;
}
int ftrace_disable_ftrace_graph_caller(void)
{
brcl_enable(ftrace_graph_caller);
return 0;
}
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
#ifdef CONFIG_KPROBES_ON_FTRACE
void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
struct ftrace_ops *ops, struct ftrace_regs *fregs)
{
struct kprobe_ctlblk *kcb;
struct pt_regs *regs;
kprobes/ftrace: Add recursion protection to the ftrace callback If a ftrace callback does not supply its own recursion protection and does not set the RECURSION_SAFE flag in its ftrace_ops, then ftrace will make a helper trampoline to do so before calling the callback instead of just calling the callback directly. The default for ftrace_ops is going to change. It will expect that handlers provide their own recursion protection, unless its ftrace_ops states otherwise. Link: https://lkml.kernel.org/r/20201028115613.140212174@goodmis.org Link: https://lkml.kernel.org/r/20201106023546.944907560@goodmis.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Ren <guoren@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-csky@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-06 02:32:40 +00:00
struct kprobe *p;
int bit;
ftrace: Add recording of functions that caused recursion This adds CONFIG_FTRACE_RECORD_RECURSION that will record to a file "recursed_functions" all the functions that caused recursion while a callback to the function tracer was running. Link: https://lkml.kernel.org/r/20201106023548.102375687@goodmis.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Guo Ren <guoren@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-csky@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: live-patching@vger.kernel.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-06 02:32:46 +00:00
bit = ftrace_test_recursion_trylock(ip, parent_ip);
kprobes/ftrace: Add recursion protection to the ftrace callback If a ftrace callback does not supply its own recursion protection and does not set the RECURSION_SAFE flag in its ftrace_ops, then ftrace will make a helper trampoline to do so before calling the callback instead of just calling the callback directly. The default for ftrace_ops is going to change. It will expect that handlers provide their own recursion protection, unless its ftrace_ops states otherwise. Link: https://lkml.kernel.org/r/20201028115613.140212174@goodmis.org Link: https://lkml.kernel.org/r/20201106023546.944907560@goodmis.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Ren <guoren@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-csky@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-06 02:32:40 +00:00
if (bit < 0)
return;
regs = ftrace_get_regs(fregs);
kprobes/ftrace: Add recursion protection to the ftrace callback If a ftrace callback does not supply its own recursion protection and does not set the RECURSION_SAFE flag in its ftrace_ops, then ftrace will make a helper trampoline to do so before calling the callback instead of just calling the callback directly. The default for ftrace_ops is going to change. It will expect that handlers provide their own recursion protection, unless its ftrace_ops states otherwise. Link: https://lkml.kernel.org/r/20201028115613.140212174@goodmis.org Link: https://lkml.kernel.org/r/20201106023546.944907560@goodmis.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Ren <guoren@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-csky@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-06 02:32:40 +00:00
preempt_disable_notrace();
p = get_kprobe((kprobe_opcode_t *)ip);
if (unlikely(!p) || kprobe_disabled(p))
goto out;
if (kprobe_running()) {
kprobes_inc_nmissed_count(p);
kprobes/ftrace: Add recursion protection to the ftrace callback If a ftrace callback does not supply its own recursion protection and does not set the RECURSION_SAFE flag in its ftrace_ops, then ftrace will make a helper trampoline to do so before calling the callback instead of just calling the callback directly. The default for ftrace_ops is going to change. It will expect that handlers provide their own recursion protection, unless its ftrace_ops states otherwise. Link: https://lkml.kernel.org/r/20201028115613.140212174@goodmis.org Link: https://lkml.kernel.org/r/20201106023546.944907560@goodmis.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Ren <guoren@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-csky@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-06 02:32:40 +00:00
goto out;
}
__this_cpu_write(current_kprobe, p);
kcb = get_kprobe_ctlblk();
kcb->kprobe_status = KPROBE_HIT_ACTIVE;
instruction_pointer_set(regs, ip);
if (!p->pre_handler || !p->pre_handler(p, regs)) {
instruction_pointer_set(regs, ip + MCOUNT_INSN_SIZE);
if (unlikely(p->post_handler)) {
kcb->kprobe_status = KPROBE_HIT_SSDONE;
p->post_handler(p, regs, 0);
}
}
__this_cpu_write(current_kprobe, NULL);
kprobes/ftrace: Add recursion protection to the ftrace callback If a ftrace callback does not supply its own recursion protection and does not set the RECURSION_SAFE flag in its ftrace_ops, then ftrace will make a helper trampoline to do so before calling the callback instead of just calling the callback directly. The default for ftrace_ops is going to change. It will expect that handlers provide their own recursion protection, unless its ftrace_ops states otherwise. Link: https://lkml.kernel.org/r/20201028115613.140212174@goodmis.org Link: https://lkml.kernel.org/r/20201106023546.944907560@goodmis.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Ren <guoren@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-csky@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-06 02:32:40 +00:00
out:
preempt_enable_notrace();
ftrace_test_recursion_unlock(bit);
}
NOKPROBE_SYMBOL(kprobe_ftrace_handler);
int arch_prepare_kprobe_ftrace(struct kprobe *p)
{
p->ainsn.insn = NULL;
return 0;
}
#endif