linux-stable/drivers/media/rc/streamzap.c

493 lines
12 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 06:55:06 +00:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Streamzap Remote Control driver
*
* Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
* Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com>
*
* This driver was based on the work of Greg Wickham and Adrian
* Dewhurst. It was substantially rewritten to support correct signal
* gaps and now maintains a delay buffer, which is used to present
* consistent timing behaviour to user space applications. Without the
* delay buffer an ugly hack would be required in lircd, which can
* cause sluggish signal decoding in certain situations.
*
* Ported to in-kernel ir-core interface by Jarod Wilson
*
* This driver is based on the USB skeleton driver packaged with the
* kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
*/
#include <linux/device.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/ktime.h>
#include <linux/usb.h>
#include <linux/usb/input.h>
#include <media/rc-core.h>
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
#define DRIVER_VERSION "1.61"
#define DRIVER_NAME "streamzap"
#define DRIVER_DESC "Streamzap Remote Control driver"
#define USB_STREAMZAP_VENDOR_ID 0x0e9c
#define USB_STREAMZAP_PRODUCT_ID 0x0000
/* table of devices that work with this driver */
static const struct usb_device_id streamzap_table[] = {
/* Streamzap Remote Control */
{ USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
/* Terminating entry */
{ }
};
MODULE_DEVICE_TABLE(usb, streamzap_table);
#define SZ_PULSE_MASK 0xf0
#define SZ_SPACE_MASK 0x0f
#define SZ_TIMEOUT 0xff
#define SZ_RESOLUTION 256
/* number of samples buffered */
#define SZ_BUF_LEN 128
enum StreamzapDecoderState {
PulseSpace,
FullPulse,
FullSpace,
IgnorePulse
};
/* structure to hold our device specific stuff */
struct streamzap_ir {
/* ir-core */
struct rc_dev *rdev;
/* core device info */
struct device *dev;
/* usb */
struct usb_device *usbdev;
struct usb_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct urb *urb_in;
/* buffer & dma */
unsigned char *buf_in;
dma_addr_t dma_in;
unsigned int buf_in_len;
/* track what state we're in */
enum StreamzapDecoderState decoder_state;
/* tracks whether we are currently receiving some signal */
bool idle;
/* sum of signal lengths received since signal start */
unsigned long sum;
/* start time of signal; necessary for gap tracking */
ktime_t signal_last;
ktime_t signal_start;
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
bool timeout_enabled;
char name[128];
char phys[64];
};
/* local function prototypes */
static int streamzap_probe(struct usb_interface *interface,
const struct usb_device_id *id);
static void streamzap_disconnect(struct usb_interface *interface);
static void streamzap_callback(struct urb *urb);
static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
static int streamzap_resume(struct usb_interface *intf);
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver streamzap_driver = {
.name = DRIVER_NAME,
.probe = streamzap_probe,
.disconnect = streamzap_disconnect,
.suspend = streamzap_suspend,
.resume = streamzap_resume,
.id_table = streamzap_table,
};
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir)
{
dev_dbg(sz->dev, "Storing %s with duration %u us\n",
(rawir.pulse ? "pulse" : "space"), rawir.duration);
ir_raw_event_store_with_filter(sz->rdev, &rawir);
}
static void sz_push_full_pulse(struct streamzap_ir *sz,
unsigned char value)
{
struct ir_raw_event rawir = {};
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
if (sz->idle) {
int delta;
sz->signal_last = sz->signal_start;
sz->signal_start = ktime_get_real();
delta = ktime_us_delta(sz->signal_start, sz->signal_last);
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
rawir.pulse = false;
if (delta > (15 * USEC_PER_SEC)) {
/* really long time */
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
rawir.duration = IR_MAX_DURATION;
} else {
rawir.duration = delta;
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
rawir.duration -= sz->sum;
rawir.duration = (rawir.duration > IR_MAX_DURATION) ?
IR_MAX_DURATION : rawir.duration;
}
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
sz_push(sz, rawir);
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
sz->idle = false;
sz->sum = 0;
}
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
rawir.pulse = true;
rawir.duration = ((int) value) * SZ_RESOLUTION;
rawir.duration += SZ_RESOLUTION / 2;
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
sz->sum += rawir.duration;
rawir.duration = (rawir.duration > IR_MAX_DURATION) ?
IR_MAX_DURATION : rawir.duration;
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
sz_push(sz, rawir);
}
static void sz_push_half_pulse(struct streamzap_ir *sz,
unsigned char value)
{
sz_push_full_pulse(sz, (value & SZ_PULSE_MASK) >> 4);
}
static void sz_push_full_space(struct streamzap_ir *sz,
unsigned char value)
{
struct ir_raw_event rawir = {};
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
rawir.pulse = false;
rawir.duration = ((int) value) * SZ_RESOLUTION;
rawir.duration += SZ_RESOLUTION / 2;
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
sz->sum += rawir.duration;
sz_push(sz, rawir);
}
static void sz_push_half_space(struct streamzap_ir *sz,
unsigned long value)
{
sz_push_full_space(sz, value & SZ_SPACE_MASK);
}
media: drivers: remove "/**" from non-kernel-doc comments Several comments are wrongly tagged as kernel-doc, causing those warnings: drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'irq' drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'data' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'solo_dev' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'ch' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'qp' drivers/media/usb/pwc/pwc-dec23.c:652: warning: Cannot understand * on line 652 - I thought it was a doc line drivers/media/usb/dvb-usb/cinergyT2-fe.c:40: warning: No description found for parameter 'op' drivers/media/usb/dvb-usb/friio-fe.c:301: warning: Cannot understand * (reg, val) commad list to initialize this module. on line 301 - I thought it was a doc line drivers/media/rc/streamzap.c:201: warning: No description found for parameter 'urb' drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'intf' drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'id' drivers/media/rc/streamzap.c:464: warning: No description found for parameter 'interface' drivers/media/i2c/ov5647.c:432: warning: Cannot understand * @short Subdev core operations registration on line 432 - I thought it was a doc line drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'd' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'addr' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wbuf' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wlen' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rbuf' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rlen' drivers/media/platform/vim2m.c:350: warning: No description found for parameter 'priv' drivers/media/dvb-frontends/tua6100.c:34: warning: cannot understand function prototype: 'struct tua6100_priv ' drivers/media/platform/sti/hva/hva-h264.c:140: warning: cannot understand function prototype: 'struct hva_h264_stereo_video_sei ' drivers/media/platform/sti/hva/hva-h264.c:150: warning: Cannot understand * @frame_width: width in pixels of the buffer containing the input frame on line 150 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:356: warning: Cannot understand * @ slice_size: slice size on line 356 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:369: warning: Cannot understand * @ bitstream_size: bitstream size on line 369 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:395: warning: Cannot understand * @seq_info: sequence information buffer on line 395 - I thought it was a doc line drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fe' drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fw' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'n' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'd' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_i' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_f' drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:83: warning: cannot understand function prototype: 'struct ttusb ' drivers/media/platform/sh_veu.c:277: warning: No description found for parameter 'priv' drivers/media/dvb-frontends/zl10036.c:33: warning: cannot understand function prototype: 'int zl10036_debug; ' drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'state' drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'frequency' drivers/media/platform/rcar_fdp1.c:1139: warning: No description found for parameter 'priv' drivers/media/platform/ti-vpe/vpe.c:933: warning: No description found for parameter 'priv' drivers/media/usb/gspca/ov519.c:36: warning: No description found for parameter 'fmt' drivers/media/usb/dvb-usb/dib0700_devices.c:3367: warning: No description found for parameter 'adap' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-29 13:33:45 +00:00
/*
* streamzap_callback - usb IRQ handler callback
*
* This procedure is invoked on reception of data from
* the usb remote.
*/
static void streamzap_callback(struct urb *urb)
{
struct streamzap_ir *sz;
unsigned int i;
int len;
if (!urb)
return;
sz = urb->context;
len = urb->actual_length;
switch (urb->status) {
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/*
* this urb is terminated, clean up.
* sz might already be invalid at this point
*/
dev_err(sz->dev, "urb terminated, status: %d\n", urb->status);
return;
default:
break;
}
dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
for (i = 0; i < len; i++) {
dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n",
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
i, (unsigned char)sz->buf_in[i]);
switch (sz->decoder_state) {
case PulseSpace:
if ((sz->buf_in[i] & SZ_PULSE_MASK) ==
SZ_PULSE_MASK) {
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
sz->decoder_state = FullPulse;
continue;
} else if ((sz->buf_in[i] & SZ_SPACE_MASK)
== SZ_SPACE_MASK) {
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
sz_push_half_pulse(sz, sz->buf_in[i]);
sz->decoder_state = FullSpace;
continue;
} else {
sz_push_half_pulse(sz, sz->buf_in[i]);
sz_push_half_space(sz, sz->buf_in[i]);
}
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
break;
case FullPulse:
sz_push_full_pulse(sz, sz->buf_in[i]);
sz->decoder_state = IgnorePulse;
break;
case FullSpace:
if (sz->buf_in[i] == SZ_TIMEOUT) {
struct ir_raw_event rawir = {
.pulse = false,
.duration = sz->rdev->timeout
};
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
sz->idle = true;
if (sz->timeout_enabled)
sz_push(sz, rawir);
ir_raw_event_handle(sz->rdev);
ir_raw_event_reset(sz->rdev);
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
} else {
sz_push_full_space(sz, sz->buf_in[i]);
}
sz->decoder_state = PulseSpace;
break;
case IgnorePulse:
if ((sz->buf_in[i] & SZ_SPACE_MASK) ==
SZ_SPACE_MASK) {
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
sz->decoder_state = FullSpace;
continue;
}
sz_push_half_space(sz, sz->buf_in[i]);
sz->decoder_state = PulseSpace;
break;
}
}
ir_raw_event_handle(sz->rdev);
usb_submit_urb(urb, GFP_ATOMIC);
}
static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)
{
struct rc_dev *rdev;
struct device *dev = sz->dev;
int ret;
rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!rdev) {
dev_err(dev, "remote dev allocation failed\n");
goto out;
}
snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared Receiver (%04x:%04x)",
le16_to_cpu(sz->usbdev->descriptor.idVendor),
le16_to_cpu(sz->usbdev->descriptor.idProduct));
usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
strlcat(sz->phys, "/input0", sizeof(sz->phys));
rdev->device_name = sz->name;
rdev->input_phys = sz->phys;
usb_to_input_id(sz->usbdev, &rdev->input_id);
rdev->dev.parent = dev;
rdev->priv = sz;
rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
rdev->driver_name = DRIVER_NAME;
rdev->map_name = RC_MAP_STREAMZAP;
ret = rc_register_device(rdev);
if (ret < 0) {
dev_err(dev, "remote input device register failed\n");
goto out;
}
return rdev;
out:
rc_free_device(rdev);
return NULL;
}
media: drivers: remove "/**" from non-kernel-doc comments Several comments are wrongly tagged as kernel-doc, causing those warnings: drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'irq' drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'data' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'solo_dev' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'ch' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'qp' drivers/media/usb/pwc/pwc-dec23.c:652: warning: Cannot understand * on line 652 - I thought it was a doc line drivers/media/usb/dvb-usb/cinergyT2-fe.c:40: warning: No description found for parameter 'op' drivers/media/usb/dvb-usb/friio-fe.c:301: warning: Cannot understand * (reg, val) commad list to initialize this module. on line 301 - I thought it was a doc line drivers/media/rc/streamzap.c:201: warning: No description found for parameter 'urb' drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'intf' drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'id' drivers/media/rc/streamzap.c:464: warning: No description found for parameter 'interface' drivers/media/i2c/ov5647.c:432: warning: Cannot understand * @short Subdev core operations registration on line 432 - I thought it was a doc line drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'd' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'addr' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wbuf' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wlen' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rbuf' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rlen' drivers/media/platform/vim2m.c:350: warning: No description found for parameter 'priv' drivers/media/dvb-frontends/tua6100.c:34: warning: cannot understand function prototype: 'struct tua6100_priv ' drivers/media/platform/sti/hva/hva-h264.c:140: warning: cannot understand function prototype: 'struct hva_h264_stereo_video_sei ' drivers/media/platform/sti/hva/hva-h264.c:150: warning: Cannot understand * @frame_width: width in pixels of the buffer containing the input frame on line 150 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:356: warning: Cannot understand * @ slice_size: slice size on line 356 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:369: warning: Cannot understand * @ bitstream_size: bitstream size on line 369 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:395: warning: Cannot understand * @seq_info: sequence information buffer on line 395 - I thought it was a doc line drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fe' drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fw' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'n' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'd' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_i' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_f' drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:83: warning: cannot understand function prototype: 'struct ttusb ' drivers/media/platform/sh_veu.c:277: warning: No description found for parameter 'priv' drivers/media/dvb-frontends/zl10036.c:33: warning: cannot understand function prototype: 'int zl10036_debug; ' drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'state' drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'frequency' drivers/media/platform/rcar_fdp1.c:1139: warning: No description found for parameter 'priv' drivers/media/platform/ti-vpe/vpe.c:933: warning: No description found for parameter 'priv' drivers/media/usb/gspca/ov519.c:36: warning: No description found for parameter 'fmt' drivers/media/usb/dvb-usb/dib0700_devices.c:3367: warning: No description found for parameter 'adap' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-29 13:33:45 +00:00
/*
* streamzap_probe
*
* Called by usb-core to associated with a candidate device
* On any failure the return value is the ERROR
* On success return 0
*/
static int streamzap_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *usbdev = interface_to_usbdev(intf);
struct usb_host_interface *iface_host;
struct streamzap_ir *sz = NULL;
char buf[63], name[128] = "";
int retval = -ENOMEM;
int pipe, maxp;
/* Allocate space for device driver specific data */
sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL);
if (!sz)
return -ENOMEM;
sz->usbdev = usbdev;
sz->interface = intf;
/* Check to ensure endpoint information matches requirements */
iface_host = intf->cur_altsetting;
if (iface_host->desc.bNumEndpoints != 1) {
dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n",
__func__, iface_host->desc.bNumEndpoints);
retval = -ENODEV;
goto free_sz;
}
sz->endpoint = &(iface_host->endpoint[0].desc);
if (!usb_endpoint_dir_in(sz->endpoint)) {
dev_err(&intf->dev, "%s: endpoint doesn't match input device 02%02x\n",
__func__, sz->endpoint->bEndpointAddress);
retval = -ENODEV;
goto free_sz;
}
if (!usb_endpoint_xfer_int(sz->endpoint)) {
dev_err(&intf->dev, "%s: endpoint attributes don't match xfer 02%02x\n",
__func__, sz->endpoint->bmAttributes);
retval = -ENODEV;
goto free_sz;
}
pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress);
maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe));
if (maxp == 0) {
dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n",
__func__);
retval = -ENODEV;
goto free_sz;
}
/* Allocate the USB buffer and IRQ URB */
sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in);
if (!sz->buf_in)
goto free_sz;
sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
if (!sz->urb_in)
goto free_buf_in;
sz->dev = &intf->dev;
sz->buf_in_len = maxp;
if (usbdev->descriptor.iManufacturer
&& usb_string(usbdev, usbdev->descriptor.iManufacturer,
buf, sizeof(buf)) > 0)
strscpy(name, buf, sizeof(name));
if (usbdev->descriptor.iProduct
&& usb_string(usbdev, usbdev->descriptor.iProduct,
buf, sizeof(buf)) > 0)
snprintf(name + strlen(name), sizeof(name) - strlen(name),
" %s", buf);
sz->rdev = streamzap_init_rc_dev(sz);
if (!sz->rdev)
goto rc_dev_fail;
sz->idle = true;
sz->decoder_state = PulseSpace;
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
/* FIXME: don't yet have a way to set this */
sz->timeout_enabled = true;
media: rc: harmonize infrared durations to microseconds rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-23 17:23:05 +00:00
sz->rdev->timeout = SZ_TIMEOUT * SZ_RESOLUTION;
#if 0
/* not yet supported, depends on patches from maxim */
/* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
media: rc: harmonize infrared durations to microseconds rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-23 17:23:05 +00:00
sz->min_timeout = SZ_TIMEOUT * SZ_RESOLUTION;
sz->max_timeout = SZ_TIMEOUT * SZ_RESOLUTION;
#endif
sz->signal_start = ktime_get_real();
/* Complete final initialisations */
usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in,
maxp, (usb_complete_t)streamzap_callback,
sz, sz->endpoint->bInterval);
sz->urb_in->transfer_dma = sz->dma_in;
sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
usb_set_intfdata(intf, sz);
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 16:31:40 +00:00
if (usb_submit_urb(sz->urb_in, GFP_ATOMIC))
dev_err(sz->dev, "urb submit failed\n");
dev_info(sz->dev, "Registered %s on usb%d:%d\n", name,
usbdev->bus->busnum, usbdev->devnum);
return 0;
rc_dev_fail:
usb_free_urb(sz->urb_in);
free_buf_in:
usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
free_sz:
kfree(sz);
return retval;
}
media: drivers: remove "/**" from non-kernel-doc comments Several comments are wrongly tagged as kernel-doc, causing those warnings: drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'irq' drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'data' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'solo_dev' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'ch' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'qp' drivers/media/usb/pwc/pwc-dec23.c:652: warning: Cannot understand * on line 652 - I thought it was a doc line drivers/media/usb/dvb-usb/cinergyT2-fe.c:40: warning: No description found for parameter 'op' drivers/media/usb/dvb-usb/friio-fe.c:301: warning: Cannot understand * (reg, val) commad list to initialize this module. on line 301 - I thought it was a doc line drivers/media/rc/streamzap.c:201: warning: No description found for parameter 'urb' drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'intf' drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'id' drivers/media/rc/streamzap.c:464: warning: No description found for parameter 'interface' drivers/media/i2c/ov5647.c:432: warning: Cannot understand * @short Subdev core operations registration on line 432 - I thought it was a doc line drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'd' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'addr' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wbuf' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wlen' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rbuf' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rlen' drivers/media/platform/vim2m.c:350: warning: No description found for parameter 'priv' drivers/media/dvb-frontends/tua6100.c:34: warning: cannot understand function prototype: 'struct tua6100_priv ' drivers/media/platform/sti/hva/hva-h264.c:140: warning: cannot understand function prototype: 'struct hva_h264_stereo_video_sei ' drivers/media/platform/sti/hva/hva-h264.c:150: warning: Cannot understand * @frame_width: width in pixels of the buffer containing the input frame on line 150 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:356: warning: Cannot understand * @ slice_size: slice size on line 356 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:369: warning: Cannot understand * @ bitstream_size: bitstream size on line 369 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:395: warning: Cannot understand * @seq_info: sequence information buffer on line 395 - I thought it was a doc line drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fe' drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fw' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'n' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'd' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_i' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_f' drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:83: warning: cannot understand function prototype: 'struct ttusb ' drivers/media/platform/sh_veu.c:277: warning: No description found for parameter 'priv' drivers/media/dvb-frontends/zl10036.c:33: warning: cannot understand function prototype: 'int zl10036_debug; ' drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'state' drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'frequency' drivers/media/platform/rcar_fdp1.c:1139: warning: No description found for parameter 'priv' drivers/media/platform/ti-vpe/vpe.c:933: warning: No description found for parameter 'priv' drivers/media/usb/gspca/ov519.c:36: warning: No description found for parameter 'fmt' drivers/media/usb/dvb-usb/dib0700_devices.c:3367: warning: No description found for parameter 'adap' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-29 13:33:45 +00:00
/*
* streamzap_disconnect
*
* Called by the usb core when the device is removed from the system.
*
* This routine guarantees that the driver will not submit any more urbs
* by clearing dev->usbdev. It is also supposed to terminate any currently
* active urbs. Unfortunately, usb_bulk_msg(), used in streamzap_read(),
* does not provide any way to do this.
*/
static void streamzap_disconnect(struct usb_interface *interface)
{
struct streamzap_ir *sz = usb_get_intfdata(interface);
struct usb_device *usbdev = interface_to_usbdev(interface);
usb_set_intfdata(interface, NULL);
if (!sz)
return;
sz->usbdev = NULL;
rc_unregister_device(sz->rdev);
usb_kill_urb(sz->urb_in);
usb_free_urb(sz->urb_in);
usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
kfree(sz);
}
static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
{
struct streamzap_ir *sz = usb_get_intfdata(intf);
usb_kill_urb(sz->urb_in);
return 0;
}
static int streamzap_resume(struct usb_interface *intf)
{
struct streamzap_ir *sz = usb_get_intfdata(intf);
if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
dev_err(sz->dev, "Error submitting urb\n");
return -EIO;
}
return 0;
}
USB: convert drivers/media/* to use module_usb_driver() This converts the drivers in drivers/media/* to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Luca Risolia <luca.risolia@studio.unibo.it> Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Frank Zago <frank@zago.net> Cc: Olivier Lorin <o.lorin@laposte.net> Cc: Erik Andren <erik.andren@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Brian Johnson <brijohn@gmail.com> Cc: Leandro Costantino <lcostantino@gmail.com> Cc: Antoine Jacquet <royale@zerezo.com> Cc: Jarod Wilson <jarod@redhat.com> Cc: Florian Mickler <florian@mickler.org> Cc: Antti Palosaari <crope@iki.fi> Cc: Michael Krufky <mkrufky@kernellabs.com> Cc: "David Härdeman" <david@hardeman.nu> Cc: Florent Audebert <florent.audebert@anevia.com> Cc: Sam Doshi <sam@metal-fish.co.uk> Cc: Manu Abraham <manu@linuxtv.org> Cc: Olivier Grenie <olivier.grenie@dibcom.fr> Cc: Patrick Boettcher <patrick.boettcher@dibcom.fr> Cc: "Igor M. Liplianin" <liplianin@me.by> Cc: Derek Kelly <user.vdr@gmail.com> Cc: Malcolm Priestley <tvboxspy@gmail.com> Cc: Steven Toth <stoth@kernellabs.com> Cc: "André Weidemann" <Andre.Weidemann@web.de> Cc: Martin Wilks <m.wilks@technisat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jose Alberto Reguero <jareguero@telefonica.net> Cc: David Henningsson <david.henningsson@canonical.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Joe Perches <joe@perches.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Anssi Hannula <anssi.hannula@iki.fi> Cc: Rafi Rubin <rafi@seas.upenn.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Paul Bender <pebender@gmail.com> Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Cc: "Márcio A Alves" <froooozen@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Chris Rankin <rankincj@yahoo.com> Cc: Lee Jones <lee.jones@canonical.com> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Dean Anderson <linux-dev@sensoray.com> Cc: Pete Eberlein <pete@sensoray.com> Cc: Arvydas Sidorenko <asido4@gmail.com> Cc: Andrea Anacleto <andreaanacleto@libero.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18 17:46:12 +00:00
module_usb_driver(streamzap_driver);
MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");